HDF5 version 1.13.4-1 currently under development ================================================================================ INTRODUCTION ============ This document describes the differences between this release and the previous HDF5 release. It contains information on the platforms tested and known problems in this release. For more details check the HISTORY*.txt files in the HDF5 source. Note that documentation in the links below will be updated at the time of each final release. Links to HDF5 documentation can be found on The HDF5 web page: https://portal.hdfgroup.org/display/HDF5/HDF5 The official HDF5 releases can be obtained from: https://www.hdfgroup.org/downloads/hdf5/ Changes from Release to Release and New Features in the HDF5-1.13.x release series can be found at: https://portal.hdfgroup.org/display/HDF5/Release+Specific+Information If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for new platforms and languages - Bug Fixes since HDF5-1.13.3 - Platforms Tested - Known Problems - CMake vs. Autotools installations New Features ============ Configuration: ------------- - Removal of MPE support The ability to build with MPE instrumentation has been removed along with the following configure options: Autotools: --with-mpe= CMake has never supported building with MPE support. (DER - 2022/11/08) - Removal of dmalloc support The ability to build with dmalloc support has been removed along with the following configure options: Autotools: --with-dmalloc= CMake: HDF5_ENABLE_USING_DMALLOC (DER - 2022/11/08) - Removal of memory allocation sanity checks configure options With the removal of the memory allocation sanity checks feature, the following configure options are no longer necessary and have been removed: Autotools: --enable-memory-alloc-sanity-check CMake: HDF5_MEMORY_ALLOC_SANITY_CHECK HDF5_ENABLE_MEMORY_STATS (DER - 2022/11/03) Library: -------- - Fix for CVE-2019-8396 Malformed HDF5 files may have truncated content which does not match the expected size. When H5O__pline_decode() attempts to decode these it may read past the end of the allocated space leading to heap overflows as bounds checking is incomplete. The fix ensures each element is within bounds before reading. (2022/11/09 - HDFFV-10712, CVE-2019-8396, GitHub #2209) - Removal of memory allocation sanity checks feature This feature added heap canaries and statistics tracking for internal library memory operations. Unfortunately, the heap canaries caused problems when library memory operations were mixed with standard C library memory operations (such as in the filter pipeline, where buffers may have to be reallocated). Since any platform with a C compiler also usually has much more sophisticated memory sanity checking tools than the HDF5 library provided (e.g., valgrind), we have decided to to remove the feature entirely. In addition to the configure changes described above, this also removes the following from the public API: H5get_alloc_stats() H5_alloc_stats_t (DER - 2022/11/03) Parallel Library: ----------------- - Fortran Library: ---------------- - C++ Library: ------------ - Java Library: ------------- - Tools: ------ - High-Level APIs: ---------------- - C Packet Table API: ------------------- - Internal header file: --------------------- - Documentation: -------------- - Support for new platforms, languages and compilers ================================================== - Bug Fixes since HDF5-1.13.3 release =================================== Library ------- - Fix CVE-2018-13867 / GHSA-j8jr-chrh-qfrf Validate location (offset) of the accumulated metadata when comparing. Initially, the accumulated metadata location is initialized to HADDR_UNDEF - the highest available address. Bogus input files may provide a location or size matching this value. Comparing this address against such bogus values may provide false positives. Thus make sure, the value has been initialized or fail the comparison early and let other parts of the code deal with the bogus address/size. Note: To avoid unnecessary checks, it is assumed that if the 'dirty' member in the same structure is true the location is valid. (EFE - 2022/10/10 GH-2230) - Fix CVE-2018-16438 / GHSA-9xmm-cpf8-rgmx Make sure info block for external links has at least 3 bytes. According to the specification, the information block for external links contains 1 byte of version/flag information and two 0 terminated strings for the object linked to and the full path. Although not very useful, the minimum string length for each (with terminating 0) would be one byte. Checking this helps to avoid SEGVs triggered by bogus files. (EFE - 2022/10/09 GH-2233) - CVE-2021-46244 / GHSA-vrxh-5gxg-rmhm Compound datatypes may not have members of size 0 A member size of 0 may lead to an FPE later on as reported in CVE-2021-46244. To avoid this, check for this as soon as the member is decoded. (EFE - 2022/10/05 GEH-2242) - Fix CVE-2021-45830 / GHSA-5h2h-fjjr-x9m2 Make H5O__fsinfo_decode() more resilient to out-of-bound reads. When decoding a file space info message in H5O__fsinfo_decode() make sure each element to be decoded is still within the message. Malformed hdf5 files may have trunkated content which does not match the expected size. Checking this will prevent attempting to decode unrelated data and heap overflows. So far, only free space manager address data was checked before decoding. (EFE - 2022/10/05 GH-2228) - Fix CVE-2021-46242 / GHSA-x9pw-hh7v-wjpf When evicting driver info block, NULL the corresponding entry. Since H5C_expunge_entry() called (from H5AC_expunge_entry()) sets the flag H5C__FLUSH_INVALIDATE_FLAG, the driver info block will be freed. NULLing the pointer in f->shared->drvinfo will prevent use-after-free when it is used in other functions (like H5F__dest()) - as other places will check whether the pointer is initialized before using its value. (EFE - 2022/09/29 GH-2254) - Fix CVE-2021-45833 / GHSA-x57p-jwp6-4v79 Report error if dimensions of chunked storage in data layout < 2 For Data Layout Messages version 1 & 2 the specification state that the value stored in the data field is 1 greater than the number of dimensions in the dataspace. For version 3 this is not explicitly stated but the implementation suggests it to be the case. Thus the set value needs to be at least 2. For dimensionality < 2 an out-of-bounds access occurs. (EFE - 2022/09/28 GH-2240) - Fix CVE-2018-14031 / GHSA-2xc7-724c-r36j Parent of enum datatype message must have the same size as the enum datatype message itself. Functions accessing the enumeration values use the size of the enumeration datatype to determine the size of each element and how much data to copy. Thus the size of the enumeration and its parent need to match. Check in H5O_dtype_decode_helper() to avoid unpleasant surprises later. (EFE - 2022/09/28 GH-2236) - Fix CVE-2018-17439 / GHSA-vcxv-vp43-rch7 H5IMget_image_info(): Make sure to not exceed local array size Malformed hdf5 files may provide more dimensions than the array dim[] in H5IMget_image_info() is able to hold. Check number of elements first by calling H5Sget_simple_extent_dims() with NULL for both 'dims' and 'maxdims' arguments. This will cause the function to return only the number of dimensions. The fix addresses a stack overflow on write. (EFE - 2022/09/27 HDFFV-10589, GH-2226) Java Library ------------ - Configuration ------------- - Change the settings of the *pc files to use the correct format The pkg-config files generated by CMake uses incorrect syntax for the 'Requires' settings. Changing the set to use 'lib-name = version' instead 'lib-name-version' fixes the issue (ADB - 2022/12/06 HDFFV-11355) - Move MPI libraries link from PRIVATE to PUBLIC The install dependencies were not including the need for MPI libraries when an application or library was built with the C library. Also updated the CMake target link command to use the newer style MPI::MPI_C link variable. (ADB - 2022/10/27) Tools ----- - Fix h5repack to only print output when verbose option is selected When timing option was added to h5repack, the check for verbose was incorrectly implemented. (ADB - 2022/12/02, GH #2270) Performance ------------- - Fortran API ----------- - High-Level Library ------------------ - Fortran High-Level APIs ----------------------- - Documentation ------------- - F90 APIs -------- - C++ APIs -------- - Testing ------- - Platforms Tested =================== Linux 5.16.14-200.fc35 GNU gcc (GCC) 11.2.1 20220127 (Red Hat 11.2.1-9) #1 SMP x86_64 GNU/Linux GNU Fortran (GCC) 11.2.1 20220127 (Red Hat 11.2.1-9) Fedora35 clang version 13.0.0 (Fedora 13.0.0-3.fc35) (cmake and autotools) Linux 5.11.0-34-generic GNU gcc (GCC) 9.3.0-17ubuntu1 #36-Ubuntu SMP x86_64 GNU/Linux GNU Fortran (GCC) 9.3.0-17ubuntu1 Ubuntu 20.04 Ubuntu clang version 10.0.0-4 (cmake and autotools) Linux 5.3.18-150300-cray_shasta_c cray-mpich/8.1.16 #1 SMP x86_64 GNU/Linux Cray clang 14.0.0 (crusher) GCC 11.2.0 (cmake) Linux 4.14.0-115.35.1.1chaos openmpi 4.0.5 #1 SMP aarch64 GNU/Linux GCC 9.2.0 (ARM-build-5) (stria) GCC 7.2.0 (Spack GCC) (cmake) Linux 4.14.0-115.35.1.3chaos spectrum-mpi/rolling-release #1 SMP ppc64le GNU/Linux clang 12.0.1 (vortex) GCC 8.3.1 XL 16.1.1 (cmake) Linux-4.14.0-115.21.2 spectrum-mpi/rolling-release #1 SMP ppc64le GNU/Linux clang 12.0.1, 14.0.5 (lassen) GCC 8.3.1 XL 16.1.1.2, 2021,09.22, 2022.08.05 (cmake) Linux-4.12.14-197.99-default cray-mpich/7.7.14 #1 SMP x86_64 GNU/Linux cce 12.0.3 (theta) GCC 11.2.0 llvm 9.0 Intel 19.1.2 Linux 3.10.0-1160.36.2.el7.ppc64 gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) #1 SMP ppc64be GNU/Linux g++ (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) Power8 (echidna) GNU Fortran (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) Linux 3.10.0-1160.24.1.el7 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: Centos7 Version 4.8.5 20150623 (Red Hat 4.8.5-4) (jelly/kituo/moohan) Version 4.9.3, Version 5.3.0, Version 6.3.0, Version 7.2.0, Version 8.3.0, Version 9.1.0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 17.0.0.098 Build 20160721 GNU C (gcc) and C++ (g++) 4.8.5 compilers with NAG Fortran Compiler Release 6.1(Tozai) Intel(R) C (icc) and C++ (icpc) 17.0.0.098 compilers with NAG Fortran Compiler Release 6.1(Tozai) MPICH 3.1.4 compiled with GCC 4.9.3 MPICH 3.3 compiled with GCC 7.2.0 OpenMPI 2.1.6 compiled with icc 18.0.1 OpenMPI 3.1.3 and 4.0.0 compiled with GCC 7.2.0 PGI C, Fortran, C++ for 64-bit target on x86_64; Version 19.10-0 (autotools and cmake) Linux-3.10.0-1160.0.0.1chaos openmpi-4.1.2 #1 SMP x86_64 GNU/Linux clang 6.0.0, 11.0.1 (quartz) GCC 7.3.0, 8.1.0 Intel 19.0.4, 2022.2, oneapi.2022.2 Linux-3.10.0-1160.71.1.1chaos openmpi/4.1 #1 SMP x86_64 GNU/Linux GCC 7.2.0 (skybridge) Intel/19.1 (cmake) Linux-3.10.0-1160.66.1.1chaos openmpi/4.1 #1 SMP x86_64 GNU/Linux GCC 7.2.0 (attaway) Intel/19.1 (cmake) Linux-3.10.0-1160.59.1.1chaos openmpi/4.1 #1 SMP x86_64 GNU/Linux Intel/19.1 (chama) (cmake) macOS Apple M1 11.6 Apple clang version 12.0.5 (clang-1205.0.22.11) Darwin 20.6.0 arm64 gfortran GNU Fortran (Homebrew GCC 11.2.0) 11.1.0 (macmini-m1) Intel icc/icpc/ifort version 2021.3.0 202106092021.3.0 20210609 macOS Big Sur 11.3.1 Apple clang version 12.0.5 (clang-1205.0.22.9) Darwin 20.4.0 x86_64 gfortran GNU Fortran (Homebrew GCC 10.2.0_3) 10.2.0 (bigsur-1) Intel icc/icpc/ifort version 2021.2.0 20210228 macOS High Sierra 10.13.6 Apple LLVM version 10.0.0 (clang-1000.10.44.4) 64-bit gfortran GNU Fortran (GCC) 6.3.0 (bear) Intel icc/icpc/ifort version 19.0.4.233 20190416 macOS Sierra 10.12.6 Apple LLVM version 9.0.0 (clang-900.39.2) 64-bit gfortran GNU Fortran (GCC) 7.4.0 (kite) Intel icc/icpc/ifort version 17.0.2 Mac OS X El Capitan 10.11.6 Apple clang version 7.3.0 from Xcode 7.3 64-bit gfortran GNU Fortran (GCC) 5.2.0 (osx1011test) Intel icc/icpc/ifort version 16.0.2 Linux 2.6.32-573.22.1.el6 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: Centos6 Version 4.4.7 20120313 (platypus) Version 4.9.3, 5.3.0, 6.2.0 MPICH 3.1.4 compiled with GCC 4.9.3 PGI C, Fortran, C++ for 64-bit target on x86_64; Version 19.10-0 Windows 10 x64 Visual Studio 2015 w/ Intel C/C++/Fortran 18 (cmake) Visual Studio 2017 w/ Intel C/C++/Fortran 19 (cmake) Visual Studio 2019 w/ clang 12.0.0 with MSVC-like command-line (C/C++ only - cmake) Visual Studio 2019 w/ Intel C/C++/Fortran oneAPI 2021 (cmake) Visual Studio 2019 w/ MSMPI 10.1 (C only - cmake) Known Problems ============== ************************************************************ * _ * * (_) * * __ ____ _ _ __ _ __ _ _ __ __ _ * * \ \ /\ / / _` | '__| '_ \| | '_ \ / _` | * * \ V V / (_| | | | | | | | | | | (_| | * * \_/\_/ \__,_|_| |_| |_|_|_| |_|\__, | * * __/ | * * |___/ * * * * Please refrain from running any program (including * * HDF5 tests) which uses the subfiling VFD on Perlmutter * * at the National Energy Research Scientific Computing * * Center, NERSC. * * Doing so may cause a system disruption due to subfiling * * crashing Lustre. The sytem's Lustre bug is expected * * to be resolved by 2023. * * * ************************************************************ CMake files do not behave correctly with paths containing spaces. Do not use spaces in paths because the required escaping for handling spaces results in very complex and fragile build files. ADB - 2019/05/07 At present, metadata cache images may not be generated by parallel applications. Parallel applications can read files with metadata cache images, but since this is a collective operation, a deadlock is possible if one or more processes do not participate. CPP ptable test fails on both VS2017 and VS2019 with Intel compiler, JIRA issue: HDFFV-10628. This test will pass with VS2015 with Intel compiler. The subsetting option in ph5diff currently will fail and should be avoided. The subsetting option works correctly in serial h5diff. Several tests currently fail on certain platforms: MPI_TEST-t_bigio fails with spectrum-mpi on ppc64le platforms. MPI_TEST-t_subfiling_vfd and MPI_TEST_EXAMPLES-ph5_subfiling fail with cray-mpich on theta and with XL compilers on ppc64le platforms. MPI_TEST_testphdf5_tldsc fails with cray-mpich 7.7 on cori and theta. Known problems in previous releases can be found in the HISTORY*.txt files in the HDF5 source. Please report any new problems found to help@hdfgroup.org. CMake vs. Autotools installations ================================= While both build systems produce similar results, there are differences. Each system produces the same set of folders on linux (only CMake works on standard Windows); bin, include, lib and share. Autotools places the COPYING and RELEASE.txt file in the root folder, CMake places them in the share folder. The bin folder contains the tools and the build scripts. Additionally, CMake creates dynamic versions of the tools with the suffix "-shared". Autotools installs one set of tools depending on the "--enable-shared" configuration option. build scripts ------------- Autotools: h5c++, h5cc, h5fc CMake: h5c++, h5cc, h5hlc++, h5hlcc The include folder holds the header files and the fortran mod files. CMake places the fortran mod files into separate shared and static subfolders, while Autotools places one set of mod files into the include folder. Because CMake produces a tools library, the header files for tools will appear in the include folder. The lib folder contains the library files, and CMake adds the pkgconfig subfolder with the hdf5*.pc files used by the bin/build scripts created by the CMake build. CMake separates the C interface code from the fortran code by creating C-stub libraries for each Fortran library. In addition, only CMake installs the tools library. The names of the szip libraries are different between the build systems. The share folder will have the most differences because CMake builds include a number of CMake specific files for support of CMake's find_package and support for the HDF5 Examples CMake project. The issues with the gif tool are: HDFFV-10592 CVE-2018-17433 HDFFV-10593 CVE-2018-17436 HDFFV-11048 CVE-2020-10809 These CVE issues have not yet been addressed and can be avoided by not building the gif tool. Disable building the High-Level tools with these options: autotools: --disable-hltools cmake: HDF5_BUILD_HL_TOOLS=OFF