HDF5 version 1.5.41 currently under development ================================================================================ INTRODUCTION This document describes the differences between HDF5-1.4.0 and HDF5-1.5-snap0, and contains information on the platforms tested and known problems in HDF5-1.5-snap0. For more details check the HISTORY.txt file in the HDF5 source. The HDF5 documentation can be found on the NCSA ftp server (ftp.ncsa.uiuc.edu) in the directory: /HDF/HDF5/docs/ For more information look at the HDF5 home page at: http://hdf.ncsa.uiuc.edu/HDF5/ If you have any questions or comments, please send them to: hdfhelp@ncsa.uiuc.edu CONTENTS - New Features - Bug Fixes since HDF5-1.4.0 - Support for new platforms and languages - Platforms Tested - Known Problems Bug Fixes since HDF5-1.4.0 ========================== Library ------- * Allow scalar dataspaces to be used for parallel I/O. QAK - 2002/11/05 * Fixed error condition where "none" selections were not being handled correctly in parallel. QAK - 2002/10/29 * New functions H5Gget_comment(modification), H5Aget_storage_size, H5Arename. SLU - 2002/10/29 * Fixed an assertion of H5S_select_iterate that did not account for scalar type that has no dimension sizes. AKC - 2002/10/15 * Partially fixed space allocation inefficiencies in the file by improving our algorithms for re-using freed space. QAK - 2002/08/27 * Fixed data corruption problem which could occur when fill values were written to a contiguously stored dataset in parallel. QAK - 2002/08/27 * Fixed metadata corruption problem which could occur when many objects are created in a file during parallel I/O. QAK - 2002/07/19 * Fixed VL memory leak when data is overwritten. The heap objects holding old data are freed. If the fill value writting time is set to H5D_FILL_TIME_NEVER, the library prohibits user to create VL type dataset. The library free all the heap objects storing VL type if there is nested VL type(a VL type contains another VL type). SLU - 2002/07/10 * Fixed bug in parallel I/O routines where a collective I/O which used MPI derived types, followed by an independent I/O would cause the library to hang. QAK - 2002/06/24 * Fixed bug in chunking routines where they were using internal allocation free routines, instead of malloc/free, preventing user filters from working correctly. Chunks are now allocated/freed with malloc/free and so should the chunks in user filters. QAK - 2002/06/18 * Fixed bug where regular hyperslab selection could get incorrectly transferred when the number of elements in a row did not fit evenly into the buffer provided. QAK - 2002/06/12 * Fixed bug (#499) which allowed an "empty" compound or enumerated datatype (one with no members) to be used to create a dataset or committed to a file. QAK - 2002/06/11 * Fixed bug (#777) which allowed a compound datatype to be inserted into itself. QAK - 2002/06/10 * Fixed bug (#789) where creating 1-D dataset region reference caused the library to go into infinite loop. QAK - 2002/06/10 * Fixed bug (#699, fix provided by a user) where a scalar dataspace was written to the file and then subsequently queried with the H5Sget_simple_extent_type function, type was reported H5S_SIMPLE instead of H5S_SCALAR. EIP - 2002/06/04 * Clear symbol table node "dirty" flag when flushing symbol tables to disk, to reduce I/O calls made & improve performance. QAK - 2002/06/03 * Fixed bug where an object's header could get corrupted in certain obscure situations where many objects were created in the file. QAK - 2002/05/31 * Fixed bug where read/write intent in file IDs created with H5Freopen was not being kept the same as the original file. QAK - 2002/05/14 * Fixed bug where selection offsets were not being used when iterating through point and hyperslab selections with H5Diterate(). QAK - 2002/04/29 * Fixed bug where the data for several level deep nested compound & variable-length datatypes used for datasets were getting corrupted when written to the file. QAK - 2002/04/17 * Fixed bug where selection offset was being ignored for certain hyperslab selections when optimized I/O was being performed. QAK - 2002/04/02 * Added serial multi-gigabyte file size test. "test/big -h" shows the help page. AKC - 2002/03/29 * Fixed bug where variable-length string type doesn't behave as string. SLU - 2002/03/28 * Fixed bug in H5Gget_objinfo() which was not setting the 'fileno' of the H5G_stat_t struct. QAK - 2002/03/27 * Fixed data corruption bug in hyperslab routines when contiguous hyperslab that spans entire dimension and is larger than type conversion buffer is attempted to be read. QAK - 2002/03/26 * Fixed bug where non-zero fill-value was not being read correctly from certain chunked datasets when using an "all" or contiguous hyperslab selection. QAK - 2002/02/14 * Fixed bug where a preempted chunk in the chunk data could still be used by an internal pointer and cause an assertion failure or core dump. QAK - 2002/02/13 * Fixed bug where raw data re-allocated from the free-list would sometimes overlap with the metadata accumulator and get corrupted. QAK - 2002/01/23 * Fixed bug where variable-length datatypes for attributes was not working correctly. * Retired the DPSS virtual file driver (--with-gridstorage configure option). * Corrected behavior of H5Tinsert to not allow compound datatype fields to be inserted past the end of the datatype. * Fixed the internal macros used to encode & decode file metadata, to avoid an unaligned access warning on IA64 machines. * Fixed an off-by-one error in H5Sselect_valid when hyperslab selections which would allow hyperslab selections which overlapped the edge of the selection by one element as valid. * Fixed a bug in internal B-tree code where a B-tree was not being copied correctly. * Fixed a bug in the 'big' test where quota limits weren't being detected properly if they caused close() to fail. * Fixed a bug where 'or'ing a hyperslab with a 'none' selection would fail. Now adds that hyperslab as the first hyperlab in the selection. * Fixed a bug where appending a point selection to the current selection would not actually append the point when there were no points defined currently. * Fixed a bug where reading or writing chunked data which needed datatype conversion could result in data values getting corrupted. * Fixed a bug where reading an entire dataset wasn't being handled optimally when the dataset had unlimited dimensions. Dataset is read in a single low-level I/O now, instead of being broken into separate pieces internally. * Fixed a bug when reading chunked datasets where the edge of the dataset would be incorrectly detected and generate an assertion failure. * Added new parallel hdf5 tests in t_mpi. The new test checks if the filesystem or the MPI-IO can really handle greater than 2GB files. If it fails, it prints information message only without failing the test. * Fixed a bug in H5FD_mpio_flush() that might result in negative file seek if both MPIO and Split-file drivers are used together. * Fixed H5FDmpio.h to be C++ friendly by making Parallel HDF5 API's to be external to C++. * Fixed a bug of H5pubconf.h causing repeated definitions if it is included more than once. hdf5.h now includes H5public.h which includes H5pubconf.h. Applications should #include hdf5.h which handles multiple inclusion correctly. * Tweaked a few API functions to use 'size_t' instead of 'unsigned' or 'hsize_t', which may cause errors in some cases. * Changed behavior of H5Tget_member_type to correctly emulate HDF5 v1.2.x when --enable-hdf5v1_2 configure flag is enabled. * Removed limitation that the data transfer buffer size needed to be set for datasets whose dimensions were too large for the 'all' selection code to handle. Any size dimensioned datasets should be handled correctly now. * The allocation by alignment (H5Pset_alignment) feature code somehow got dropped in some 1.3.x version. Re-implemented it with "new and improved" algorithm. It keeps track of "wasted" file-fragment in the free-list too. * IMPORTANT: Fixed file metadata corruption bug which could cause metadata data loss in certain situations. * Fixed build on Linux systems with --enable-static-exec flag. It now works correctly. * Fixed bug with non-zero userblock sizes causing raw data to not write correctly. * The RCSID string in H5public.h was causing the C++ compiling problem because when it was included multiple times, C++ did not like multiple definitions of the same static variable. All occurance of RCSID definition are removed since we have not used it consistently before. * Fixed bug where non-aligned hyperslab I/O on chunked datasets was causing errors during I/O * Fixed bug with contiguous hyperslabs not being detected, causing slower I/O than necessary. Configuration ------------- * Added "--with-dmalloc" flag, to easily enable support for the 'dmalloc' debugging malloc implementation. -QAK, 2002/07/15 * Can use just enable-threadsafe if the C compiler has builtin pthreads support. * Require HDF (a.k.a. hdf4) software that consists of a newer version of zlib library which consists of the compress2() function. Versions HDF version 4.1r3 and newer meets this requirement. The compress2 uses a newer compression algorithm used by the HDF5 library. Also, 4.1r3 has an hdp tool that can handle "loops" in Vgroups. * Added --enable-linux-lfs flag to allow more control over whether to enable or disable large file support on Linux. * Basic port to Compaq (nee DEC) Alpha OSF 5. * Changed the default value of $NPROCS from 2 to 3 since 3 processes have a much bigger chance catching parallel errors than just 2. Tools ----- * Fixed segfault if h5dump was invoked with some options but no file (e.g., h5dump -H). -AKC, 2002/10/15 * Fixed limitation in h5dumper with object names which reached over 1024 characters in length. We can now handle arbitrarily larger sizes for object names. BW - 2002/02/27 * Fixed so that the "-i" flag works correctly with the h5dumper. * Fixed segfault when "-v" flag was used with the h5dumper. Documentation ------------- o Library ========= o General --------- * API tracing has been improved. Nested API calls don't screw up the output format; function call and return event times can be logged; total time spent in each function can be logged. The following HDF5_DEBUG environment variable words affect tracing: trace -- turn on/off basic tracing ttimes -- turn on tracing and report event times and time spent in each API function. ttop -- turn on tracing but display only top-level API calls. o APIs ------ o Performance ------------- New Features ============ * Functions H5Tget_native_type and H5Tis_variable_str are added. The first one reconstructs a datatype based on native memory datatype. The second one checks if a datatype is variable string. SLU - 2002/11/6 * Added environment variable "HDF5_DISABLE_VERSION_CHECK", which disables the version checking between the header files and the library linked into an application if set to '1'. This should be used with caution, mis- matched headers and library binaries can cause _serious_ problems. QAK - 2002/10/15 * Added new API function to get the name of an object in a file, using an open ID (hid_t). QAK - 2002/10/14 * Added API functions to return pointer to low-level file handle (H5Fget_vfd_handle and H5FDget_vfd_handle) and related property list setting functions(H5Pset_family_offset and H5Pset_multi_type). SLU - 2002/09/30 * Changed "H5P[set|get]_space_time" functions to "H5P[set|get]_alloc_time" Unify all symbolic names for these functions to use "alloc time" instead of other names. QAK - 2002/09/13 * Added "H5D_SPACE_ALLOC_INCR" setting to H5D_SPACE_ALLOC_EARLY and H5D_SPACE_ALLOC_LATE for H5Dset_space_time(). This allows chunked datasets to be incrementally allocated as in the 1.4.x branch. QAK - 2002/08/27 * Compact dataset is added to the library. The data will be stored in the header message of dataset layout. Space allocation time has to be EARLY. No hyperslab is supported for parallel collective write. There is no API changes except activating H5Pset_layout and H5Pget_layout for compact dataset. -SLU, 2002/8/20 * Added MPI-posix VFL driver. This VFL driver uses MPI functions to coordinate actions, but performs I/O directly with POSIX sec(2) (i.e. open/close/read/write/etc.) calls. This driver should _NOT_ be used to access files that are not on a parallel filesystem. The following API functions were added: herr_t H5Pset_fapl_mpiposix(hid_t fapl_id, MPI_Comm comm); herr_t H5Pget_fapl_mpiposix(hid_t fapl_id, MPI_Comm *comm/*out*/); -QAK, 2002/07/15 * Added environment variable flag to control whether creating MPI derived typed is preferred or not. This can affect performance, depending on which way the MPI-I/O library is optimized for. The default is set to prefer MPI derived types for collective raw data transfers, setting the HDF5_MPI_PREFER_DERIVED_TYPES environment variable to "0" (i.e.: "setenv HDF5_MPI_PREFER_DERIVED_TYPES 0") changes the preference to avoid using then whenever possible. QAK - 2002/06/19 * Changed MPI I/O routines to avoid creating MPI derived types (and thus needing to set the file view) for contiguous selections within datasets, which should result in some performance improvement for those types of selections. QAK - 2002/06/18 * Enable MPI type support for collective I/O to be enabled by default. This can be disabled by setting the HDF5_MPI_OPT_TYPES environment variable to the value "0". QAK - 2002/06/14 * Allow chunks in chunked datasets to be cached when parallel file is opened for read-only access (bug #709). QAK - 2002/06/10 * Added internal "small data" aggregation, which can reduce the number of actual I/O calls made, improving performance. QAK - 2002/06/05 * Improved internal metadata aggregation, which can reduce the number of actual I/O calls made, improving performance. Additionally, this can reduce the size of files produced. QAK - 2002/06/04 * Improved internal metadata caching, which can reduce the number of actual I/O calls made by a substantial amount, improving performance. QAK - 2002/06/03 * Added 'closing' parameter to VFL 'flush' callback function and H5FDflush. This allows the library to indicate that the file will be closed immediately following the call to 'flush' and can be used to avoid actions that are duplicated in the VFL 'close' callback function. QAK - 2002/05/20 * Added feature to parallel chunk allocation routine to not write fill values to chunks allocated if the user has set the "fill time" to never. This can improve parallel I/O performance for chunked datasets. QAK - 2002/05/17 * Changed method for allocating chunked dataset blocks in parallel to only allocate blocks that don't already exist, instead of attempting to create all the blocks all the time. This improves parallel I/O performance for chunked datasets. QAK - 2002/05/17 * Allowed the call to MPI_File_sync to be avoided when the file is going to immediately be closed, improving performance. QAK - 2002/05/13 * Allow the metadata writes to be shared among all processes, easing the burden on process 0. QAK - 2002/05/10 * New functions H5Glink2 and H5Gmove2 were added to allow link and move to be in different locations in the same file. The old functions H5Glink and H5Gmove remain valid. SLU - 2002/04/26 * Fill-value's behaviors for contiguous dataset have been redefined. Basicly, dataset won't allocate space until it's necessary. Full details are available at http://hdf.ncsa.uiuc.edu/RFC/Fill_Value, at this moment. SLU - 2002/04/11 * Added new routine "H5Dfill" to fill a selection with a particular value in memory. QAK - 2002/04/09 * A new query function H5Tget_member_index has been added for compound and enumeration data types, to retrieve member's index by name. SLU - 2002/04/05 * Improved performance of "regular" hyperslab I/O when using MPI-IO and the datatype conversion is unneccessary. QAK - 2002/04/02 * Improved performance of single hyperslab I/O when datatype conversion is unneccessary. QAK - 2002/04/02 * New API function H5Dset_extent. Modifies the dimensions of a dataset, allows change to a lower dimension. The unused space in the file is freed. PVN - 2002/03/31 * Added new "H5Sget_select_type" API function to determine which type of selection is defined for a dataspace ("all", "none", "hyperslab" or "point"). QAK - 2002/02/07 * Added support to read/write portions of chunks directly, if they are uncompressed and too large to cache. This should speed up I/O on chunked datasets for a few more cases. QAK - 2002/01/31 * Parallel HDF5 is now supported on HP-UX 11.00 platforms. * Added H5Rget_obj_type() API function, which performs the same functionality as H5Rget_object_type(), but requires the reference type as a parameter in order to correctly handle dataset region references. Moved H5Rget_object_type() to be only compiled into the library when v1.4 compatibility is enabled. * Changed internal error handling macros to reduce code size of library by about 10-20%. * Added a new file access property, file close degree, to control file close behavior. It has four values, H5F_CLOSE_WEAK, H5F_CLOSE_SEMI, H5F_CLOSE_STRONG, and H5F_CLOSE_DEFAULT. Two correspont functions H5Pset_fclose_degree and H5Pget_fclose_degree are also provided. Two new functions H5Fget_obj_count and H5Fget_obj_ids are offerted to assist this new feature. For full details, please refer to the reference manual under the description of H5Fcreate, H5Fopen, H5Fclose and the functions mentioned above. * Removed H5P(get|set)_hyper_cache API function, since the property is no longer used. * Improved performance of non-contiguous hyperslabs (built up with several hyperslab selection calls). * Improved performance of single, contiguous hyperslabs when reading or writing. * As part of the transition to using generic properties everywhere, the parameter of H5Pcreate changed from H5P_class_t to hid_t, as well the return type of H5Pget_class changed from H5P_class_t to hid_t. Further changes are still necessary and will be documented here as they are made. * Added a new test to verify the information provided by the configure command. * The H5Pset_fapl_split() accepts raw and meta file names similar to the syntax of H5Pset_fapl_multi() in addition to what it used to accept. * Added perform programs to test the HDF5 library performance. Programs are installed in directory perform/. * Added new checking in H5check_version() to verify the five HDF5 version information macros (H5_VERS_MAJOR, H5_VERS_MINOR, H5_VERS_RELEASE, H5_VERS_SUBRELEASE and H5_VERS_INFO) are consistent. * Added a new public macro, H5_VERS_INFO, which is a string holding the HDF5 library version information. This string is also compiled into all HDF5 binary code which helps to identify the version information of the binary code. One may use the Unix strings command on the binary file and looks for the pattern "HDF5 library version". * Added a parallel HDF5 example examples/ph5example.c to illustrate the basic way of using parallel HDF5. * Added two simple parallel performance tests as mpi-perf.c (MPI performance) and perf.c (PHDF5 performance) in testpar. * Improved regular hyperslab I/O by about a factor of 6 or so. * Modified the Pablo build procedure to permit building of the instrumented library to link either with the Trace libraries as before or with the Pablo Performance Caputure Facility. * Verified correct operation of library on Solaris 2.8 in both 64-bit and 32-bit compilation modes. See INSTALL document for instructions on compiling the distribution with 64-bit support. * Parallel HDF5 now runs on the HP V2500 and HP N4000 machines. * H5 <-> GIF convertor has been added. This is available under tools/gifconv. The convertor supports the ability to create animated gifs as well. * Added a global string variable H5_lib_vers_info_g which holds the HDF5 library version information. This can be used to identify an hdf5 library or hdf5 application binary. Also added a verification of the consistency between H5_lib_vers_info_g and other version information in the source code. * File sizes greater than 2GB are now supported on Linux systems with version 2.4.x or higher kernels. * F90 APIs are available on HPUX 11.00 and IBM SP platforms. * F90 static library is available on Windows platforms. See INSTALL_Windows.txt for details. * F90 API: - Added aditional parameter "dims" to the h5dread/h5dwrite and h5aread/h5awrite subroutines. This parameter is 1D array of size 7 and contains the sizes of the data buffer dimensions. - F90 subroutines h5dwrite_f, h5dread_f, h5awrite_f and h5aread_f were overloaded with "dims" argument to be assumed size array of type INTEGER(HSIZE_T). We recommend to use the subroutines with the new type. Module subroutines that accept "dims" as INTEGER array of size 7 will be deprecated in 1.6 release. EIP - 2002/05/06 - Added the following functions to the Library APIs: h5get_libversion_f h5dont_atexit_f h5check_version_f h5garbage_collect_f EIP - 2002/09/24 H5F APIs: h5fget_obj_count_f h5fget_obj_ids_f EIP - 2002/10/01 H5G APIs: h5glink2_f and h5gmove2_f EIP - 2002/09/25 H5P APIs: h5pequal_f h5pget(set)_fclose_degree_f h5pget(set)_buffer_f H5T APIs: h5tget_member_index_f EIP - 2002/10/01 * C++ API: - Added two new member functions: Exception::getFuncName() and Exception::getCFuncName() to provide the name of the member function, where an exception is thrown. - IdComponent::operator= becomes a virtual function because DataType, DataSpace, and PropList provide their own implementation. The new operator= functions invoke H5Tcopy, H5Scopy, and H5Pcopy to make a copy of a datatype, dataspace, and property list, respectively. * A helper script called ``h5cc'', which helps compilation of HDF5 programs, is now distributed with HDF5. See the reference manual for information on how to use this feature. Support for new platforms and languages ======================================= * Parallel Fortran Library works now on HP-UX B.11.00 Sys V EIP - 2002/05/06 Platforms Tested ================ AIX 4.3.3.0 (IBM SP powerpc) mpcc_r 3.6.6 Cray T3E sn6711 2.0.5.45 Cray Standard C Version 6.4.0.0 Cray Fortran Version 3.4.0.2 Cray SV1 sn9605 10.0.0.7 Cray Standard C Version 6.4.0.0 Cray Fortran Version 3.4.0.2 FreeBSD 4.6 gcc 2.95.4 g++ 2.95.4 HP-UX B.10.20 HP C HP92453-01 A.10.32.30 HP-UX B.11.00 HP C HP92453-01 A.11.00.13 HP C HP92453-01 A.11.01.20 IRIX 6.5 MIPSpro cc 7.30 IRIX64 6.5 (64 & n32) MIPSpro cc 7.3.1m mpt.1.4.0.2 mpich-1.2.1 Linux 2.4.18 gcc-2.95.3 g++ 2.95.3 Linux 2.2.18smp gcc-2.95.2 g++ 2.95.2 pgf90 3.1-3 OSF1 V4.0 DEC-V5.2-040 Digital Fortran 90 V4.1-270 SunOS 5.6 WorkShop Compilers 5.0 98/12/15 C 5.0 (Solaris 2.6) WorkShop Compilers 5.0 99/10/25 Fortran 90 2.0 Patch 107356-04 Workshop Compilers 5.0 98/12/15 C++ 5.0 SunOS 5.7 WorkShop Compilers 5.0 98/12/15 C 5.0 (Solaris 2.7) WorkShop Compilers 5.0 99/10/25 Fortran 90 2.0 Patch 107356-04 Workshop Compilers 5.0 98/12/15 C++ 5.0 TFLOPS r1.0.4 v4.0 mpich-1.2.1 with local changes Windows NT4.0, 2000 (NT5.0) MSVC++ 6.0 Windows 98 MSVC++ 6.0 Supported Configuration Features Summary ======================================== In the tables below y = tested and supported n = not supported or not tested in this release x = not working in this release ( ) = footnote appears below second table Platform C C F90 F90 C++ Shared zlib Tools parallel parallel libraries (5) Solaris2.7 y y (1) y n y y y y Solaris2.8 64 y n y n y y y y Solaris2.8 32 y y (1) y n y y y y IA-64 y n n n n n y y IRIX6.5 y y (1) n n n y y y IRIX64_6.5 64 y y (2) y y n y y y IRIX64_6.5 32 y y (2) n n n y y y HPUX10.20 y n y n n y y y HPUX11.00 y y y n n y y y HPUX11 SysV y y y y n y y y DECOSF y n y n y y y y T3E y y y y n n y y SV1 y n y n n n y y TFLOPS y y (1) n n n n y y (4) AIX-4.3 SP2 y y y y n n y n AIX-4.3 SP3 y y y y y n y n Win2000 y n y n y (6) y y y Win98 y n y n y (6) y y y WinNT y n y n y (6) y y y WinNT CW y n n n n n y y FreeBSD y n n n y y y y Linux 2.2 y y (1) y n y y y y Linux 2.4 y y (1) n n y y y y Platform 1.2 static- Thread- SRB GASS STREAM- compatibility exec safe VFD Solaris2.7 n x y n n y Solaris2.8 64 n y n n n y Solaris2.8 32 n x y n n y IA-64 n n n n n y IRIX6.5 n x y n n y IRIX64_6.5 64 n x y n y y IRIX64_6.5 32 n x y n y y HPUX10.20 n y n n n y HPUX11.00 n x n n n y HPUX11 SysV n x n n n y DECOSF n y n n n y T3E n y n n n y SV1 n y n n n y TFLOPS n y n n n n AIX-4.3 SP2 n y (3) n n n y AIX-4.3 SP3 n y n n n y Win2000 n y n n n n Win98 n y n n n n WinNT n y n n n n WinNT CW n n n n n n FreeBSD n y y n n y Linux 2.2 n y y n n y Linux 2.4 n y y n n y Footnotes: (1) Using mpich. (2) Using mpt and mpich. (3) When configured with static-exec enabled, tests fail in serial mode. (4) No HDF4-related tools. (5) Shared libraries are provided only for the C library. (6) Exception of (5): DLL is available for C++ API on Windows Known Problems ============== * Datasets or attributes which have a variable-length string datatype are not printing correctly with h5dump and h5ls. * The stream-vfd test uses ip port 10007 for testing. If another application is already using that port address, the test will hang indefinitely and has to be terminated by the kill command. To try the test again, change the port address in test/stream_test.c to one not being used in the host. * The --enable-static-exec configure flag fails to compile for Solaris platforms. This is due to the fact that not all of the system libraries on Solaris are available in a static format. The --enable-static-exec configure flag also fails to correctly compile on IBM SP2 platform for the serial mode. The parallel mode works fine with this option. It is suggested that you don't use this option on these platforms during configuration. * With the gcc 2.95.2 compiler, HDF 5 uses the `-ansi' flag during compilation. The ANSI version of the compiler complains about not being able to handle the `long long' datatype with the warning: warning: ANSI C does not support `long long' This warning is innocuous and can be safely ignored. * SunOS 5.6 with C WorkShop Compilers 4.2: Hyperslab selections will fail if library is compiled using optimization of any level. * h5toh4 converter fails two cases (tstr.h5 and tmany.h5) for release dll version on windows 2000 and NT. The reason is possibly due to windows NT DLL convention on freeing memory. It seems that memory cannot be free across library or DLL. It is still under investigated. * The Stream VFD was not tested yet under Windows. It is not supported in the TFLOPS machine. * Shared library option is broken for IBM SP and some Origin 2000 platforms. One needs to run ./configure with '--disable-shared' * The ./dsets tests failed in the TFLOPS machine if the test program, dsets.c, is compiled with the -O option. The hdf5 library still works correctly with the -O option. The test program works fine if it is compiled with -O1 or -O0. Only -O (same as -O2) causes the test program to fail. * Certain platforms give false negatives when testing h5ls: - Solaris x86 2.5.1, Cray T3E and Cray J90 give errors during testing when displaying object references in certain files. These are benign differences due to the difference in sizes of the objects created on those platforms. h5ls appears to be dumping object references correctly. - Cray J90 (and Cray T3E?) give errors during testing when displaying some floating-point values. These are benign differences due to the different precision in the values displayed and h5ls appears to be dumping floating-point numbers correctly. * Before building HDF5 F90 Library from source on Crays (T3E and J90) replace H5Aff.f90, H5Dff.f90 and H5Pff.f90 files in the fortran/src subdirectory in the top level directory with the Cray-specific files from the site: ftp://hdf.ncsa.uiuc.edu/pub/ougoing/hdf5/hdf5-1.4.0-beta/F90_source_for_Crays * On IA32 and IA64 systems, if you use a compiler other than GCC (such as Intel's ecc or icc compilers), you will need to modify the generated "libtool" program after configuration is finished. On or around line 104 of the libtool file, there are lines which look like: # How to pass a linker flag through the compiler. wl="" change these lines to this: # How to pass a linker flag through the compiler. wl="-Wl,"