HDF5 version 1.15.0 currently under development ================================================================================ INTRODUCTION ============ This document describes the differences between this release and the previous HDF5 release. It contains information on the platforms tested and known problems in this release. For more details check the HISTORY*.txt files in the HDF5 source. Note that documentation in the links below will be updated at the time of each final release. Links to HDF5 documentation can be found on The HDF5 web page: https://portal.hdfgroup.org/display/HDF5/HDF5 The official HDF5 releases can be obtained from: https://www.hdfgroup.org/downloads/hdf5/ Changes from Release to Release and New Features in the HDF5-1.16.x release series can be found at: https://portal.hdfgroup.org/display/HDF5/Release+Specific+Information If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for new platforms and languages - Bug Fixes since HDF5-1.14.0 - Platforms Tested - Known Problems - CMake vs. Autotools installations New Features ============ Configuration: ------------- - Improved support for Intel oneAPI * Separates the old 'classic' Intel compiler settings and warnings from the oneAPI settings * Uses `-check nouninit` in debug builds to avoid false positives when building H5_buildiface with `-check all` * Both Autotools and CMake - Added new options for CMake and Autotools to control the Doxygen warnings as errors setting. * HDF5_ENABLE_DOXY_WARNINGS: ON/OFF (Default: ON) * --enable-doxygen-errors: enable/disable (Default: enable) The default will fail compile if the doxygen parsing generates warnings. The option can be disabled if certain versions of doxygen have parsing issues. i.e. 1.9.5, 1.9.8. Addresses GitHub issue #3398 - Added support for AOCC and classic Flang w/ the Autotools * Adds a config/clang-fflags options file to support Flang * Corrects missing "-Wl," from linker options in the libtool wrappers when using Flang, the MPI Fortran compiler wrappers, and building the shared library. This would often result in unrecognized options like -soname. * Enable -nomp w/ Flang to avoid linking to the OpenMPI library. CMake can build the parallel, shared library w/ Fortran using AOCC and Flang, so no changes were needed for that build system. Fixes GitHub issues #3439, #1588, #366, #280 - Converted the build of libaec and zlib to use FETCH_CONTENT with CMake. Using the CMake FetchContent module, the external filters can populate content at configure time via any method supported by the ExternalProject module. Whereas ExternalProject_Add() downloads at build time, the FetchContent module makes content available immediately, allowing the configure step to use the content in commands like add_subdirectory(), include() or file() operations. Removed HDF options for using FETCH_CONTENT explicitly: BUILD_SZIP_WITH_FETCHCONTENT:BOOL BUILD_ZLIB_WITH_FETCHCONTENT:BOOL - Thread-safety + static library disabled on Windows w/ CMake The thread-safety feature requires hooks in DllMain(), which is only present in the shared library. We previously just warned about this, but now any CMake configuration that tries to build thread-safety and the static library will fail. This cannot be overridden with ALLOW_UNSUPPORTED. Fixes GitHub issue #3613 - Autotools builds now build the szip filter by default when an appropriate library is found Since libaec is prevalent and BSD-licensed for both encoding and decoding, we build the szip filter by default now. Both autotools and CMake build systems will process the szip filter the same as the zlib filter is processed. - Removed CMake cross-compiling variables * HDF5_USE_PREGEN * HDF5_BATCH_H5DETECT These were used to work around H5detect and H5make_libsettings and are no longer required. - Running H5make_libsettings is no longer required for cross-compiling The functionality of H5make_libsettings is now handled via template files, so H5make_libsettings has been removed. - Running H5detect is no longer required for cross-compiling The functionality of H5detect is now exercised at library startup, so H5detect has been removed. - Updated HDF5 API tests CMake code to support VOL connectors * Implemented support for fetching, building and testing HDF5 VOL connectors during the library build process and documented the feature under doc/cmake-vols-fetchcontent.md * Implemented the HDF5_TEST_API_INSTALL option that enables installation of the HDF5 API tests on the system - Added new CMake options for building and running HDF5 API tests (Experimental) HDF5 API tests are an experimental feature, primarily targeted toward HDF5 VOL connector authors, that is currently being developed. These tests exercise the HDF5 API and are being integrated back into the HDF5 library from the HDF5 VOL tests repository (https://github.com/HDFGroup/vol-tests). To support this feature, the following new options have been added to CMake: * HDF5_TEST_API: ON/OFF (Default: OFF) Controls whether the HDF5 API tests will be built. These tests will only be run during testing of HDF5 if the HDF5_TEST_SERIAL (for serial tests) and HDF5_TEST_PARALLEL (for parallel tests) options are enabled. * HDF5_TEST_API_INSTALL: ON/OFF (Default: OFF) Controls whether the HDF5 API test executables will be installed on the system alongside the HDF5 library. This option is currently not functional. * HDF5_TEST_API_ENABLE_ASYNC: ON/OFF (Default: OFF) Controls whether the HDF5 Async API tests will be built. These tests will only be run if the VOL connector used supports Async operations. * HDF5_TEST_API_ENABLE_DRIVER: ON/OFF (Default: OFF) Controls whether to build the HDF5 API test driver program. This test driver program is useful for VOL connectors that use a client/server model where the server needs to be up and running before the VOL connector can function. This option is currently not functional. * HDF5_TEST_API_SERVER: String (Default: "") Used to specify a path to the server executable that the test driver program should execute. - Added support for CMake presets file. CMake supports two main files, CMakePresets.json and CMakeUserPresets.json, that allow users to specify common configure options and share them with others. HDF added a CMakePresets.json file of a typical configuration and support file, config/cmake-presets/hidden-presets.json. Also added a section to INSTALL_CMake.txt with very basic explanation of the process to use CMakePresets. - Deprecated and removed old SZIP library in favor of LIBAEC library LIBAEC library has been used in HDF5 binaries as the szip library of choice for a few years. We are removing the options for using the old SZIP library. Also removed the config/cmake/FindSZIP.cmake file. - Enabled instrumentation of the library by default in CMake for parallel debug builds HDF5 can be configured to instrument portions of the parallel library to aid in debugging. Autotools builds of HDF5 turn this capability on by default for parallel debug builds and off by default for other build types. CMake has been updated to match this behavior. - Added new option to build libaec and zlib inline with CMake. Using the CMake FetchContent module, the external filters can populate content at configure time via any method supported by the ExternalProject module. Whereas ExternalProject_Add() downloads at build time, the FetchContent module makes content available immediately, allowing the configure step to use the content in commands like add_subdirectory(), include() or file() operations. The HDF options (and defaults) for using this are: BUILD_SZIP_WITH_FETCHCONTENT:BOOL=OFF LIBAEC_USE_LOCALCONTENT:BOOL=OFF BUILD_ZLIB_WITH_FETCHCONTENT:BOOL=OFF ZLIB_USE_LOCALCONTENT:BOOL=OFF The CMake variables to control the path and file names: LIBAEC_TGZ_ORIGPATH:STRING LIBAEC_TGZ_ORIGNAME:STRING ZLIB_TGZ_ORIGPATH:STRING ZLIB_TGZ_ORIGNAME:STRING See the CMakeFilters.cmake and config/cmake/cacheinit.cmake files for usage. - Added the CMake variable HDF5_ENABLE_ROS3_VFD to the HDF5 CMake config file hdf5-config.cmake. This allows to easily detect if the library has been built with or without read-only S3 functionality. Library: -------- - Added a simple cache to the read-only S3 (ros3) VFD The read-only S3 VFD now caches the first N bytes of a file stored in S3 to avoid a lot of small I/O operations when opening files. This cache is per-file and created when the file is opened. N is currently 16 MiB or the size of the file, whichever is smaller. Addresses GitHub issue #3381 - Added new API function H5Pget_actual_selection_io_mode() This function allows the user to determine if the library performed selection I/O, vector I/O, or scalar (legacy) I/O during the last HDF5 operation performed with the provided DXPL. - Added support for in-place type conversion in most cases In-place type conversion allows the library to perform type conversion without an intermediate type conversion buffer. This can improve performance by allowing I/O in a single operation over the entire selection instead of being limited by the size of the intermediate buffer. Implemented for I/O on contiguous and chunked datasets when the selection is contiguous in memory and when the memory datatype is not smaller than the file datatype. - Changed selection I/O to be on by default when using the MPIO file driver - Added support for selection I/O in the MPIO file driver Previously, only vector I/O operations were supported. Support for selection I/O should improve performance and reduce memory uses in some cases. - Changed the error handling for a not found path in the find plugin process. While attempting to load a plugin the HDF5 library will fail if one of the directories in the plugin paths does not exist, even if there are more paths to check. Instead of exiting the function with an error, just logged the error and continue processing the list of paths to check. - Implemented support for temporary security credentials for the Read-Only S3 (ROS3) file driver. When using temporary security credentials, one also needs to specify a session/security token next to the access key id and secret access key. This token can be specified by the new API function H5Pset_fapl_ros3_token(). The API function H5Pget_fapl_ros3_token() can be used to retrieve the currently set token. - Added a Subfiling VFD configuration file prefix environment variable The Subfiling VFD now checks for values set in a new environment variable "H5FD_SUBFILING_CONFIG_FILE_PREFIX" to determine if the application has specified a pathname prefix to apply to the file path for its configuration file. For example, this can be useful for cases where the application wishes to write subfiles to a machine's node-local storage while placing the subfiling configuration file on a file system readable by all machine nodes. - Added H5Pset_selection_io(), H5Pget_selection_io(), and H5Pget_no_selection_io_cause() API functions to manage the selection I/O feature. This can be used to enable collective I/O with type conversion, or it can be used with custom VFDs that support vector or selection I/O. - Added H5Pset_modify_write_buf() and H5Pget_modify_write_buf() API functions to allow the library to modify the contents of write buffers, in order to avoid malloc/memcpy. Currently only used for type conversion with selection I/O. Parallel Library: ----------------- - Added optimized support for the parallel compression feature when using the multi-dataset I/O API routines collectively Previously, calling H5Dwrite_multi/H5Dread_multi collectively in parallel with a list containing one or more filtered datasets would cause HDF5 to break out of the optimized multi-dataset I/O mode and instead perform I/O by looping over each dataset in the I/O request. The library has now been updated to perform I/O in a more optimized manner in this case by first performing I/O on all the filtered datasets at once and then performing I/O on all the unfiltered datasets at once. - Changed H5Pset_evict_on_close so that it can be called with a parallel build of HDF5 Previously, H5Pset_evict_on_close would always fail when called from a parallel build of HDF5, stating that the feature is not supported with parallel HDF5. This failure would occur even if a parallel build of HDF5 was used with a serial HDF5 application. H5Pset_evict_on_close can now be called regardless of the library build type and the library will instead fail during H5Fcreate/H5Fopen if the "evict on close" property has been set to true and the file is being opened for parallel access with more than 1 MPI process. Fortran Library: ---------------- - Added Fortran APIs: h5vlnative_addr_to_token_f and h5vlnative_token_to_address_f - Fixed an uninitialized error return value for hdferr to return the error state of the h5aopen_by_idx_f API. - Added h5pget_vol_cap_flags_f and related Fortran VOL capability definitions. - Fortran async APIs H5A, H5D, H5ES, H5G, H5F, H5L and H5O were added. - Added Fortran APIs: h5pset_selection_io_f, h5pget_selection_io_f, h5pget_actual_selection_io_mode_f, h5pset_modify_write_buf_f, h5pget_modify_write_buf_f - Added Fortran APIs: h5get_free_list_sizes_f, h5dwrite_chunk_f, h5dread_chunk_f, h5fget_info_f, h5lvisit_f, h5lvisit_by_name_f, h5pget_no_selection_io_cause_f, h5pget_mpio_no_collective_cause_f, h5sselect_shape_same_f, h5sselect_intersect_block_f, h5pget_file_space_page_size_f, h5pset_file_space_page_size_f, h5pget_file_space_strategy_f, h5pset_file_space_strategy_f - Removed "-commons" linking option on Darwin, as COMMON and EQUIVALENCE are no longer used in the Fortran source. Fixes GitHub issue #3571 C++ Library: ------------ - Java Library: ------------- - Tools: ------ - High-Level APIs: ---------------- - Added Fortran HL API: h5doappend_f C Packet Table API: ------------------- - Internal header file: --------------------- - Documentation: -------------- - Support for new platforms, languages and compilers ================================================== - Bug Fixes since HDF5-1.14.0 release =================================== Library ------- - Suppressed floating-point exceptions in H5T init code The floating-point datatype initialization code in H5Tinit_float.c could raise FE_INVALID exceptions while munging bits and performing comparisons that might involve NaN. This was not a problem when the initialization code was executed in H5detect at compile time (prior to 1.14.3), but now that the code is executed at library startup (1.14.3+), these exceptions can be caught by user code, as is the default in the NAG Fortran compiler. Starting in 1.14.4, we now suppress floating-point exceptions while initializing the floating-point types and clear FE_INVALID before restoring the original environment. Fixes GitHub #3831 - Fixed a file handle leak in the core VFD When opening a file with the core VFD and a file image, if the file already exists, the file check would leak the POSIX file handle. Fixes GitHub issue #635 - Fixed some issues with chunk index metadata not getting read collectively when collective metadata reads are enabled When looking up dataset chunks during I/O, the parallel library temporarily disables collective metadata reads since it's generally unlikely that the application will read the same chunks from all MPI ranks. Leaving collective metadata reads enabled during chunk lookups can lead to hangs or other bad behavior depending on the chunk indexing structure used for the dataset in question. However, due to the way that dataset chunk index metadata was previously loaded in a deferred manner, this could mean that the metadata for the main chunk index structure or its accompanying pieces of metadata (e.g., fixed array data blocks) could end up being read independently if these chunk lookup operations are the first chunk index-related operation that occurs on a dataset. This behavior is generally observed when opening a dataset for which the metadata isn't in the metadata cache yet and then immediately performing I/O on that dataset. This behavior is not generally observed when creating a dataset and then performing I/O on it, as the relevant metadata will usually be in the metadata cache as a side effect of creating the chunk index structures during dataset creation. This issue has been fixed by adding callbacks to the different chunk indexing structure classes that allow more explicit control over when chunk index metadata gets loaded. When collective metadata reads are enabled, the necessary index metadata will now get loaded collectively by all MPI ranks at the start of dataset I/O to ensure that the ranks don't unintentionally read this metadata independently further on. These changes fix collective loading of the main chunk index structure, as well as v2 B-tree root nodes, extensible array index blocks and fixed array data blocks. There are still pieces of metadata that cannot currently be loaded collectively, however, such as extensible array data blocks, data block pages and super blocks, as well as fixed array data block pages. These pieces of metadata are not necessarily read in by all MPI ranks since this depends on which chunks the ranks have selected in the dataset. Therefore, reading of these pieces of metadata remains an independent operation. - Fixed potential hangs in parallel library during collective I/O with independent metadata writes When performing collective parallel writes to a dataset where metadata writes are requested as (or left as the default setting of) independent, hangs could potentially occur during metadata cache sync points. This was due to incorrect management of the internal state tracking whether an I/O operation should be collective or not, causing the library to attempt collective writes of metadata when they were meant to be independent writes. During the metadata cache sync points, if the number of cache entries being flushed was a multiple of the number of MPI ranks in the MPI communicator used to access the HDF5 file, an equal amount of collective MPI I/O calls were made and the dataset write call would be successful. However, when the number of cache entries being flushed was NOT a multiple of the number of MPI ranks, the ranks with more entries than others would get stuck in an MPI_File_set_view call, while other ranks would get stuck in a post-write MPI_Barrier call. This issue has been fixed by correctly switching to independent I/O temporarily when writing metadata independently during collective dataset I/O. - Dropped support for MPI-2 The MPI-2 supporting artifacts have been removed due to the cessation of MPI-2 maintenance and testing since version HDF5 1.12. - Fixed a bug with the way the Subfiling VFD assigns I/O concentrators During a file open operation, the Subfiling VFD determines the topology of the application and uses that to select a subset of MPI ranks that I/O will be forwarded to, called I/O concentrators. The code for this had previously assumed that the parallel job launcher application (e.g., mpirun, srun, etc.) would distribute MPI ranks sequentially among a node until all processors on that node have been assigned before going on to the next node. When the launcher application mapped MPI ranks to nodes in a different fashion, such as round-robin, this could cause the Subfiling VFD to incorrectly map MPI ranks as I/O concentrators, leading to missing subfiles. - Fixed performance regression with some compound type conversions In-place type conversion was introduced for most use cases in 1.14.2. While being able to use the read buffer for type conversion potentially improves performance by performing the entire I/O at once, it also disables the optimized compound type conversion used when the destination is a subset of the source. Disabled in-place type conversion when using this optimized conversion and there is no benefit in terms of the I/O size. - Fixed an assertion in a previous fix for CVE-2016-4332 An assert could fail when processing corrupt files that have invalid shared message flags (as in CVE-2016-4332). The assert statement in question has been replaced with pointer checks that don't raise errors. Since the function is in cleanup code, we do our best to close and free things, even when presented with partially initialized structs. Fixes CVE-2016-4332 and HDFFV-9950 (confirmed via the cve_hdf5 repo) - Fixed a file space allocation bug in the parallel library for chunked datasets With the addition of support for incremental file space allocation for chunked datasets with filters applied to them that are created/accessed in parallel, a bug was introduced to the library's parallel file space allocation code. This could cause file space to not be allocated correctly for datasets without filters applied to them that are created with serial file access and later opened with parallel file access. In turn, this could cause parallel writes to those datasets to place incorrect data in the file. - Fixed an assertion failure in Parallel HDF5 when a file can't be created due to an invalid library version bounds setting An assertion failure could occur in H5MF_settle_raw_data_fsm when a file can't be created with Parallel HDF5 due to specifying the use of a paged, persistent file free space manager (H5Pset_file_space_strategy(..., H5F_FSPACE_STRATEGY_PAGE, 1, ...)) with an invalid library version bounds combination (H5Pset_libver_bounds(..., H5F_LIBVER_EARLIEST, H5F_LIBVER_V18)). This has now been fixed. - Fixed bugs in selection I/O Previously, the library could fail in some cases when performing selection I/O with type conversion. - Fixed CVE-2018-13867 A corrupt file containing an invalid local heap datablock address could trigger an assert failure when the metadata cache attempted to load the datablock from storage. The local heap now verifies that the datablock address is valid when the local heap header information is parsed. - Fixed CVE-2018-11202 A malformed file could result in chunk index memory leaks. Under most conditions (i.e., when the --enable-using-memchecker option is NOT used), this would result in a small memory leak and and infinite loop and abort when shutting down the library. The infinite loop would be due to the "free list" package not being able to clear its resources so the library couldn't shut down. When the "using a memory checker" option is used, the free lists are disabled so there is just a memory leak with no abort on library shutdown. The chunk index resources are now correctly cleaned up when reading misparsed files and valgrind confirms no memory leaks. - Fixed an issue where an assert statement was converted to an incorrect error check statement An assert statement in the library dealing with undefined dataset data fill values was converted to an improper error check that would always trigger when a dataset's fill value was set to NULL (undefined). This has now been fixed. - Fixed an assertion failure when attempting to use the Subfiling IOC VFD directly The Subfiling feature makes use of two Virtual File Drivers, the Subfiling VFD and the IOC (I/O Concentrator) VFD. The two VFDs are intended to be stacked together such that the Subfiling VFD sits "on top" of the IOC VFD and routes I/O requests through it; using the IOC VFD alone is currently unsupported. The IOC VFD has been fixed so that an error message is displayed in this situation rather than causing an assertion failure. - Fixed a potential bug when copying empty enum datatypes Copying an empty enum datatype (including implicitly, as when an enum is a part of a compound datatype) would fail in an assert in debug mode and could fail in release mode depending on how the platform handles undefined behavior regarding size 0 memory allocations and using memcpy with a NULL src pointer. The library is now more careful about using memory operations when copying empty enum datatypes and will not error or raise an assert. - Added an AAPL check to H5Acreate A check was added to H5Acreate to ensure that a failure is correctly returned when an invalid Attribute Access Property List is passed in to the function. The HDF5 API tests were failing for certain build types due to this condition not being checked previously. - Fixed a bug in H5Ocopy that could generate invalid HDF5 files H5Ocopy was missing a check to determine whether the new object's object header version is greater than version 1. Without this check, copying of objects with object headers that are smaller than a certain size would cause H5Ocopy to create an object header for the new object that has a gap in the header data. According to the HDF5 File Format Specification, this is not allowed for version 1 of the object header format. Fixes GitHub issue #2653 - Fixed H5Pget_vol_cap_flags and H5Pget_vol_id to accept H5P_DEFAULT H5Pget_vol_cap_flags and H5Pget_vol_id were updated to correctly accept H5P_DEFAULT for the 'plist_id' FAPL parameter. Previously, they would fail if provided with H5P_DEFAULT as the FAPL. - Fixed ROS3 VFD anonymous credential usage with h5dump and h5ls ROS3 VFD anonymous credential functionality became broken in h5dump and h5ls in the HDF5 1.14.0 release with the added support for VFD plugins, which changed the way that the tools handled setting of credential information that the VFD uses. The tools could be provided the command-line option of "--s3-cred=(,,)" as a workaround for anonymous credential usage, but the documentation for this option stated that anonymous credentials could be used by simply omitting the option. The latter functionality has been restored. Fixes GitHub issue #2406 - Fixed memory leaks when processing malformed object header continuation messages Malformed object header continuation messages can result in a too-small buffer being passed to the decode function, which could lead to reading past the end of the buffer. Additionally, errors in processing these malformed messages can lead to allocated memory not being cleaned up. This fix adds bounds checking and cleanup code to the object header continuation message processing. Fixes GitHub issue #2604 - Fixed memory leaks, aborts, and overflows in H5O EFL decode The external file list code could call assert(), read past buffer boundaries, and not properly clean up resources when parsing malformed external data files messages. This fix cleans up allocated memory, adds buffer bounds checks, and converts asserts to HDF5 error checking. Fixes GitHub issue #2605 - Fixed potential heap buffer overflow in decoding of link info message Detections of buffer overflow were added for decoding version, index flags, link creation order value, and the next three addresses. The checkings will remove the potential invalid read of any of these values that could be triggered by a malformed file. Fixes GitHub issue #2603 - Memory leak Memory leak was detected when running h5dump with "pov". The memory was allocated via H5FL__malloc() in hdf5/src/H5FL.c The fuzzed file "pov" was an HDF5 file containing an illegal continuation message. When deserializing the object header chunks for the file, memory is allocated for the array of continuation messages (cont_msg_info->msgs) in continuation message info struct. As error is encountered in loading the illegal message, the memory allocated for cont_msg_info->msgs needs to be freed. Fixes GitHub issue #2599 - Fixed memory leaks that could occur when reading a dataset from a malformed file When attempting to read layout, pline, and efl information for a dataset, memory leaks could occur if attempting to read pline/efl information threw an error, which is due to the memory that was allocated for pline and efl not being properly cleaned up on error. Fixes GitHub issue #2602 - Fixed potential heap buffer overrun in group info header decoding from malformed file H5O__ginfo_decode could sometimes read past allocated memory when parsing a group info message from the header of a malformed file. It now checks buffer size before each read to properly throw an error in these cases. Fixes GitHub issue #2601 - Fixed potential buffer overrun issues in some object header decode routines Several checks were added to H5O__layout_decode and H5O__sdspace_decode to ensure that memory buffers don't get overrun when decoding buffers read from a (possibly corrupted) HDF5 file. - Fixed a heap buffer overflow that occurs when reading from a dataset with a compact layout within a malformed HDF5 file During opening of a dataset that has a compact layout, the library allocates a buffer that stores the dataset's raw data. The dataset's object header that gets written to the file contains information about how large of a buffer the library should allocate. If this object header is malformed such that it causes the library to allocate a buffer that is too small to hold the dataset's raw data, future I/O to the dataset can result in heap buffer overflows. To fix this issue, an extra check is now performed for compact datasets to ensure that the size of the allocated buffer matches the expected size of the dataset's raw data (as calculated from the dataset's dataspace and datatype information). If the two sizes do not match, opening of the dataset will fail. Fixes GitHub issue #2606 - Fixed a memory corruption issue that can occur when reading from a dataset using a hyperslab selection in the file dataspace and a point selection in the memory dataspace When reading from a dataset using a hyperslab selection in the dataset's file dataspace and a point selection in the dataset's memory dataspace where the file dataspace's "rank" is greater than the memory dataspace's "rank", memory corruption could occur due to an incorrect number of selection points being copied when projecting the point selection onto the hyperslab selection's dataspace. - Fixed issues in the Subfiling VFD when using the SELECT_IOC_EVERY_NTH_RANK or SELECT_IOC_TOTAL I/O concentrator selection strategies Multiple bugs involving these I/O concentrator selection strategies were fixed, including: * A bug that caused the selection strategy to be altered when criteria for the strategy was specified in the H5FD_SUBFILING_IOC_SELECTION_CRITERIA environment variable as a single value, rather than in the old and undocumented 'integer:integer' format * Two bugs which caused a request for 'N' I/O concentrators to result in 'N - 1' I/O concentrators being assigned, which also lead to issues if only 1 I/O concentrator was requested Also added a regression test for these two I/O concentrator selection strategies to prevent future issues. - Fix CVE-2021-37501 / GHSA-rfgw-5vq3-wrjf Check for overflow when calculating on-disk attribute data size. A bogus hdf5 file may contain dataspace messages with sizes which lead to the on-disk data sizes to exceed what is addressable. When calculating the size, make sure, the multiplication does not overflow. The test case was crafted in a way that the overflow caused the size to be 0. Fixes GitHub #2458 - Fixed an issue with collective metadata writes of global heap data New test failures in parallel netCDF started occurring with debug builds of HDF5 due to an assertion failure and this was reported in GitHub issue #2433. The assertion failure began happening after the collective metadata write pathway in the library was updated to use vector I/O so that parallel-enabled HDF5 Virtual File Drivers (other than the existing MPI I/O VFD) can support collective metadata writes. The assertion failure was fixed by updating collective metadata writes to treat global heap metadata as raw data, as done elsewhere in the library. Fixes GitHub issue #2433 - Fixed buffer overflow error in image decoding function. The error occurred in the function for decoding address from the specified buffer, which is called many times from the function responsible for image decoding. The length of the buffer is known in the image decoding function, but no checks are produced, so the buffer overflow can occur in many places, including callee functions for address decoding. The error was fixed by inserting corresponding checks for buffer overflow. Fixes GitHub issue #2432 - Reading a H5std_string (std::string) via a C++ DataSet previously truncated the string at the first null byte as if reading a C string. Fixed length datasets are now read into H5std_string as a fixed length string of the appropriate size. Variable length datasets will still be truncated at the first null byte. Fixes Github issue #3034 - Fixed write buffer overflow in H5O__alloc_chunk The overflow was found by OSS-Fuzz https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=58658 Java Library ------------ - Fixed switch case 'L' block missing a break statement. The HDF5Array.arrayify method is missing a break statement in the case 'L': section which causes it to fall through and throw an HDF5JavaException when attempting to read an Array[Array[Long]]. The error was fixed by inserting a break statement at the end of the case 'L': sections. Fixes GitHub issue #3056 Configuration ------------- - Fixed an issue where the h5tools_test_utils test program was being installed on the system for Autotools builds of HDF5 The h5tools_test_utils test program was mistakenly added to bin_PROGRAMS in its Makefile.am configuration file, causing the executable to be installed on the system. The executable is now added to noinst_PROGRAMS instead and will no longer be installed on the system for Autotools builds of HDF5. The CMake configuration code already avoids installing the executable on the system. - Fixed a configuration issue that prevented building of the Subfiling VFD on macOS Checks were added to the CMake and Autotools code to verify that CLOCK_MONOTONIC_COARSE, PTHREAD_MUTEX_ADAPTIVE_NP and pthread_condattr_setclock() are available before attempting to use them in Subfiling VFD-related utility code. Without these checks, attempting to build the Subfiling VFD on macOS would fail. - Fixes the ordering of INCLUDES when building with CMake Include directories in the source or build tree should come before other directories to prioritize headers in the sources over installed ones. Fixes GitHub #1027 - The accum test now passes on macOS 12+ (Monterey) w/ CMake Due to changes in the way macOS handles LD_LIBRARY_PATH, the accum test started failing on macOS 12+ when building with CMake. CMake has been updated to set DYLD_LIBRARY_PATH on macOS and the test now passes. Fixes GitHub #2994, #2261, and #1289 - Changed the default settings used by CMake for the GZIP filter The default for the option HDF5_ENABLE_Z_LIB_SUPPORT was OFF. Now the default is ON. This was done to match the defaults used by the autotools configure.ac. In addition, the CMake message level for not finding a suitable filter library was changed from FATAL_ERROR (which would halt the build process) to WARNING (which will print a message to stderr). Associated files and documentation were changed to match. In addition, the default settings in the config/cmake/cacheinit.cmake file were changed to allow CMake to disable building the filters if the tgz file could not be found. The option to allow CMake to download the file from the original Github location requires setting the ZLIB_USE_LOCALCONTENT option to OFF for gzip. And setting the LIBAEC_USE_LOCALCONTENT option to OFF for libaec (szip). Fixes GitHub issue #2926 - Fixed syntax of generator expressions used by CMake Add quotes around the generator expression should allow CMake to correctly parse the expression. Generator expressions are typically parsed after command arguments. If a generator expression contains spaces, new lines, semicolons or other characters that may be interpreted as command argument separators, the whole expression should be surrounded by quotes when passed to a command. Failure to do so may result in the expression being split and it may no longer be recognized as a generator expression. Fixes GitHub issue #2906 - Fixed improper include of Subfiling VFD build directory With the release of the Subfiling Virtual File Driver feature, compiler flags were added to the Autotools build's CPPFLAGS and AM_CPPFLAGS variables to always include the Subfiling VFD source code directory, regardless of whether the VFD is enabled and built or not. These flags are needed because the header files for the VFD contain macros that are assumed to always be available, such as H5FD_SUBFILING_NAME, so the header files are unconditionally included in the HDF5 library. However, these flags are only needed when building HDF5, so they belong in the H5_CPPFLAGS variable instead. Inclusion in the CPPFLAGS and AM_CPPFLAGS variables would export these flags to the h5cc and h5c++ wrapper scripts, as well as the libhdf5.settings file, which would break builds of software that use HDF5 and try to use or parse information out of these files after deleting temporary HDF5 build directories. Fixes GitHub issue #2621 - Correct the CMake generated pkg-config file The pkg-config file generated by CMake had the order and placement of the libraries wrong. Also added support for debug library names. Changed the order of Libs.private libraries so that dependencies come after dependents. Did not move the compression libraries into Requires.private because there was not a way to determine if the compression libraries had supported pkconfig files. Still recommend that the CMake config file method be used for building projects with CMake. Fixes GitHub issues #1546 and #2259 - Force lowercase Fortran module file names The Cray Fortran compiler uses uppercase Fortran module file names, which caused CMake installs to fail. A compiler option was added to use lowercase instead. Tools ----- - Renamed h5fuse.sh to h5fuse Addresses Discussion #3791 - Fixed an issue with unmatched MPI messages in ph5diff The "manager" MPI rank in ph5diff was unintentionally sending "program end" messages to its workers twice, leading to an error from MPICH similar to the following: Abort(810645519) on node 1 (rank 1 in comm 0): Fatal error in internal_Finalize: Other MPI error, error stack: internal_Finalize(50)...........: MPI_Finalize failed MPII_Finalize(394)..............: MPIR_Comm_delete_internal(1224).: Communicator (handle=44000000) being freed has 1 unmatched message(s) MPIR_Comm_release_always(1250)..: MPIR_finalize_builtin_comms(154): - Fixed an issue in h5repack for variable-length typed datasets When repacking datasets into a new file, h5repack tries to determine whether it can use H5Ocopy to copy each dataset into the new file, or if it needs to manually re-create the dataset, then read data from the old dataset and write it to the new dataset. H5repack was previously using H5Ocopy for datasets with variable-length datatypes, but this can be problematic if the global heap addresses involved do not match exactly between the old and new files. These addresses could change for a variety of reasons, such as the command-line options provided to h5repack, how h5repack allocate space in the repacked file, etc. Since H5Ocopy does not currently perform any translation when these addresses change, datasets that were repacked with H5Ocopy could become unreadable in the new file. H5repack has been fixed to repack variable-length typed datasets without using H5Ocopy to ensure that the new datasets always have the correct global heap addresses. - Names of objects with square brackets will have trouble without the special argument, --no-compact-subset, on the h5dump command line. h5diff did not have this option and now it has been added. Fixes GitHub issue #2682 - In the tools traverse function - an error in either visit call will bypass the cleanup of the local data variables. Replaced the H5TOOLS_GOTO_ERROR with just H5TOOLS_ERROR. Fixes GitHub issue #2598 Performance ------------- - Fortran API ----------- - High-Level Library ------------------ - Fortran High-Level APIs ----------------------- - Documentation ------------- - F90 APIs -------- - C++ APIs -------- - Testing ------- - Disabled running of MPI Atomicity tests for OpenMPI major versions < 5 Support for MPI atomicity operations is not implemented for major versions of OpenMPI less than version 5. This would cause the MPI atomicity tests for parallel HDF5 to sporadically fail when run with OpenMPI. Testphdf5 now checks if OpenMPI is being used and will skip running the atomicity tests if the major version of OpenMPI is < 5. - Fixed a testing failure in testphdf5 on Cray machines On some Cray machines, what appears to be a bug in Cray MPICH was causing calls to H5Fis_accessible to create a 0-byte file with strange Unix permissions. This was causing an H5Fdelete file deletion test in the testphdf5 program to fail due to a just-deleted HDF5 file appearing to still be accessible on the file system. The issue in Cray MPICH has been worked around for the time being by resetting the MPI_Info object on the File Access Property List used to MPI_INFO_NULL before passing it to the H5Fis_accessible call. - A bug was fixed in the HDF5 API test random datatype generation code A bug in the random datatype generation code could cause test failures when trying to generate an enumeration datatype that has duplicated name/value pairs in it. This has now been fixed. - A bug was fixed in the HDF5 API test VOL connector registration checking code The HDF5 API test code checks to see if the VOL connector specified by the HDF5_VOL_CONNECTOR environment variable (if any) is registered with the library before attempting to run tests with it so that testing can be skipped and an error can be returned when a VOL connector fails to register successfully. Previously, this code didn't account for VOL connectors that specify extra configuration information in the HDF5_VOL_CONNECTOR environment variable and would incorrectly report that the specified VOL connector isn't registered due to including the configuration information as part of the VOL connector name being checked for registration status. This has now been fixed. - Fixed Fortran 2003 test with gfortran-v13, optimization levels O2,O3 Fixes failing Fortran 2003 test with gfortran, optimization level O2,O3 with -fdefault-real-16. Fixes GH #2928. Platforms Tested =================== Linux 5.16.14-200.fc35 GNU gcc (GCC) 11.2.1 20220127 (Red Hat 11.2.1-9) #1 SMP x86_64 GNU/Linux GNU Fortran (GCC) 11.2.1 20220127 (Red Hat 11.2.1-9) Fedora35 clang version 13.0.0 (Fedora 13.0.0-3.fc35) (cmake and autotools) Linux 5.19.0-1027-aws GNU gcc (GCC) 11.3.0-1ubuntu1 #36-Ubuntu SMP x86_64 GNU/Linux GNU Fortran (GCC) 11.3.0-1ubuntu1 Ubuntu 22.04 Intel oneAPI DPC++/C++ Compiler, IFX 2023.1.0 Ubuntu clang version 14.0.0-1ubuntu1 (cmake and autotools) Linux 5.15.0-1037-aws GNU gcc (GCC) 9.4.0-1ubuntu1 #36-Ubuntu SMP x86_64 GNU/Linux GNU Fortran (GCC) 9.4.0-1ubuntu1 Ubuntu 20.04 Intel oneAPI DPC++/C++ Compiler, IFX 2023.1.0 Ubuntu clang version 10.0.0-4ubuntu1 (cmake and autotools) Linux 5.14.21-cray_shasta_c cray-mpich/8.1.25 #1 SMP x86_64 GNU/Linux cce 15.0.1 (perlmutter) GCC 12.2.0 intel-oneapi/2023.1.0 nvidia/22.7 (cmake) Linux 5.14.21-cray_shasta_c cray-mpich/8.1.23 #1 SMP x86_64 GNU/Linux cce 15.0.1 (crusher) GCC 12.2.0 (cmake) Linux-4.14.0-115.21.2 spectrum-mpi/rolling-release #1 SMP ppc64le GNU/Linux clang 12.0.1, 14.0.5 (lassen) GCC 8.3.1 XL 16.1.1.2, 2021,09.22, 2022.08.05 (cmake) Linux-4.12.14-197.99-default cray-mpich/7.7.14 #1 SMP x86_64 GNU/Linux cce 12.0.3 (theta) GCC 11.2.0 llvm 9.0 Intel 19.1.2 Linux 3.10.0-1160.36.2.el7.ppc64 gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) #1 SMP ppc64be GNU/Linux g++ (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) Power8 (echidna) GNU Fortran (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) IBM XL C for Linux, V13.1 IBM XL Fortran for Linux, V15.1 Linux 3.10.0-1160.24.1.el7 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: Centos7 Version 4.8.5 20150623 (Red Hat 4.8.5-4) (jelly/kituo/moohan) Version 4.9.3, Version 5.3.0, Version 6.3.0, Version 7.2.0, Version 8.3.0, Version 9.1.0 Version 10.2.0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 17.0.0.098 Build 20160721 GNU C (gcc) and C++ (g++) 4.8.5 compilers with NAG Fortran Compiler Release 6.1(Tozai) Intel(R) C (icc) and C++ (icpc) 17.0.0.098 compilers with NAG Fortran Compiler Release 6.1(Tozai) MPICH 3.3 compiled with GCC 7.2.0 MPICH 4.0.3 compiled with GCC 7.2.0 OpenMPI 3.1.3 compiled with GCC 7.2.0 OpenMPI 4.1.2 compiled with GCC 9.1.0 PGI C, Fortran, C++ for 64-bit target on x86_64; Version 19.10-0 NVIDIA C, Fortran, C++ for 64-bit target on x86_64; Version 22.5-0 (autotools and cmake) Linux-3.10.0-1160.0.0.1chaos openmpi-4.1.2 #1 SMP x86_64 GNU/Linux clang 6.0.0, 11.0.1 (quartz) GCC 7.3.0, 8.1.0 Intel 19.0.4, 2022.2, oneapi.2022.2 macOS Apple M1 11.6 Apple clang version 12.0.5 (clang-1205.0.22.11) Darwin 20.6.0 arm64 gfortran GNU Fortran (Homebrew GCC 11.2.0) 11.1.0 (macmini-m1) Intel icc/icpc/ifort version 2021.3.0 202106092021.3.0 20210609 macOS Big Sur 11.3.1 Apple clang version 12.0.5 (clang-1205.0.22.9) Darwin 20.4.0 x86_64 gfortran GNU Fortran (Homebrew GCC 10.2.0_3) 10.2.0 (bigsur-1) Intel icc/icpc/ifort version 2021.2.0 20210228 macOS High Sierra 10.13.6 Apple LLVM version 10.0.0 (clang-1000.10.44.4) 64-bit gfortran GNU Fortran (GCC) 6.3.0 (bear) Intel icc/icpc/ifort version 19.0.4.233 20190416 Mac OS X El Capitan 10.11.6 Apple clang version 7.3.0 from Xcode 7.3 64-bit gfortran GNU Fortran (GCC) 5.2.0 (osx1011test) Intel icc/icpc/ifort version 16.0.2 Linux 2.6.32-573.22.1.el6 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: Centos6 Version 4.4.7 20120313 (platypus) Version 4.9.3, 5.3.0, 6.2.0 MPICH 3.1.4 compiled with GCC 4.9.3 PGI C, Fortran, C++ for 64-bit target on x86_64; Version 19.10-0 Windows 10 x64 Visual Studio 2019 w/ clang 12.0.0 with MSVC-like command-line (C/C++ only - cmake) Visual Studio 2019 w/ Intel C/C++ only cmake) Visual Studio 2022 w/ clang 15.0.1 with MSVC-like command-line (C/C++ only - cmake) Visual Studio 2022 w/ Intel C/C++/Fortran oneAPI 2023 (cmake) Visual Studio 2019 w/ MSMPI 10.1 (C only - cmake) Known Problems ============== When HDF5 is compiled with NVHPC versions 23.5 - 23.9 (additional versions may also be applicable) and with -O2 (or higher) and -DNDEBUG, test failures occur in the following tests: H5PLUGIN-filter_plugin H5TEST-flush2 H5TEST-testhdf5-base MPI_TEST_t_filters_parallel Since these tests pass with an optimization level of -O1 (and -O0) and it is currently unclear whether the test failures are due to issues in HDF5 or issues in the 'nvc' compiler, the maximum optimization level for NVHPC has been set to -O1 until the test failures can be resolved. Note that even at -O1 optimization level, there still appears to be a sporadic test failure in the Java JUnit tests that has occasionally been seen in JUnit-TestH5Pfapl and JUnit-TestH5D. It is also unclear whether this is an issue in HDF5 or with the 'nvc' compiler. Finally, note that NVHPC 23.9 will fail to compile the test/tselect.c test file with a compiler error of 'use of undefined value' when the optimization level is -O2 or higher. Nvidia is aware of this issue and has suggested lowering the optimization level to -O1 for the time being: https://forums.developer.nvidia.com/t/hdf5-no-longer-compiles-with-nv-23-9/269045. CMake files do not behave correctly with paths containing spaces. Do not use spaces in paths because the required escaping for handling spaces results in very complex and fragile build files. ADB - 2019/05/07 At present, metadata cache images may not be generated by parallel applications. Parallel applications can read files with metadata cache images, but since this is a collective operation, a deadlock is possible if one or more processes do not participate. CPP ptable test fails on both VS2017 and VS2019 with Intel compiler, JIRA issue: HDFFV-10628. This test will pass with VS2015 with Intel compiler. The subsetting option in ph5diff currently will fail and should be avoided. The subsetting option works correctly in serial h5diff. Several tests currently fail on certain platforms: MPI_TEST-t_bigio fails with spectrum-mpi on ppc64le platforms. MPI_TEST-t_subfiling_vfd and MPI_TEST_EXAMPLES-ph5_subfiling fail with cray-mpich on theta and with XL compilers on ppc64le platforms. MPI_TEST_testphdf5_tldsc fails with cray-mpich 7.7 on cori and theta. Known problems in previous releases can be found in the HISTORY*.txt files in the HDF5 source. Please report any new problems found to help@hdfgroup.org. CMake vs. Autotools installations ================================= While both build systems produce similar results, there are differences. Each system produces the same set of folders on linux (only CMake works on standard Windows); bin, include, lib and share. Autotools places the COPYING and RELEASE.txt file in the root folder, CMake places them in the share folder. The bin folder contains the tools and the build scripts. Additionally, CMake creates dynamic versions of the tools with the suffix "-shared". Autotools installs one set of tools depending on the "--enable-shared" configuration option. build scripts ------------- Autotools: h5c++, h5cc, h5fc CMake: h5c++, h5cc, h5hlc++, h5hlcc The include folder holds the header files and the fortran mod files. CMake places the fortran mod files into separate shared and static subfolders, while Autotools places one set of mod files into the include folder. Because CMake produces a tools library, the header files for tools will appear in the include folder. The lib folder contains the library files, and CMake adds the pkgconfig subfolder with the hdf5*.pc files used by the bin/build scripts created by the CMake build. CMake separates the C interface code from the fortran code by creating C-stub libraries for each Fortran library. In addition, only CMake installs the tools library. The names of the szip libraries are different between the build systems. The share folder will have the most differences because CMake builds include a number of CMake specific files for support of CMake's find_package and support for the HDF5 Examples CMake project. The issues with the gif tool are: HDFFV-10592 CVE-2018-17433 HDFFV-10593 CVE-2018-17436 HDFFV-11048 CVE-2020-10809 These CVE issues have not yet been addressed and are avoided by not building the gif tool by default. Enable building the High-Level tools with these options: autotools: --enable-hlgiftools cmake: HDF5_BUILD_HL_GIF_TOOLS=ON