/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /*------------------------------------------------------------------------- * * Created: H5AC.c * Jul 9 1997 * Robb Matzke * * Purpose: Functions in this file implement a cache for * things which exist on disk. All "things" associated * with a particular HDF file share the same cache; each * HDF file has it's own cache. * * Modifications: * * Robb Matzke, 4 Aug 1997 * Added calls to H5E. * * Quincey Koziol, 22 Apr 2000 * Turned on "H5AC_SORT_BY_ADDR" * * John Mainzer, 5/19/04 * Complete redesign and rewrite. See the header comments for * H5AC_t for an overview of what is going on. * * John Mainzer, 6/4/04 * Factored the new cache code into a separate file (H5C.c) to * facilitate re-use. Re-worked this file again to use H5C. * *------------------------------------------------------------------------- */ #define H5F_PACKAGE /*suppress error about including H5Fpkg */ /* Pablo information */ /* (Put before include files to avoid problems with inline functions) */ #define PABLO_MASK H5AC_mask #include "H5private.h" /* Generic Functions */ #include "H5ACprivate.h" /* Metadata cache */ #include "H5Dprivate.h" /* Dataset functions */ #include "H5Eprivate.h" /* Error handling */ #include "H5Fpkg.h" /* Files */ #include "H5FDprivate.h" /* File drivers */ #include "H5Iprivate.h" /* IDs */ #include "H5Pprivate.h" /* Property lists */ /* Interface initialization */ static int interface_initialize_g = 0; #define INTERFACE_INIT H5AC_init_interface static herr_t H5AC_init_interface(void); /* * Private file-scope variables. */ /* Default dataset transfer property list for metadata I/O calls */ /* (Collective set, "block before metadata write" set and "library internal" set) */ /* (Global variable definition, declaration is in H5ACprivate.h also) */ hid_t H5AC_dxpl_id=(-1); /* Private dataset transfer property list for metadata I/O calls */ /* (Collective set and "library internal" set) */ /* (Static variable definition) */ static hid_t H5AC_noblock_dxpl_id=(-1); /* Dataset transfer property list for independent metadata I/O calls */ /* (just "library internal" set - i.e. independent transfer mode) */ /* (Global variable definition, declaration is in H5ACprivate.h also) */ hid_t H5AC_ind_dxpl_id=(-1); /* * Private file-scope function declarations: */ static herr_t H5AC_check_if_write_permitted(H5F_t *f, hid_t dxpl_id, hbool_t * write_permitted_ptr); /*------------------------------------------------------------------------- * Function: H5AC_init * * Purpose: Initialize the interface from some other layer. * * Return: Success: non-negative * * Failure: negative * * Programmer: Quincey Koziol * Saturday, January 18, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5AC_init(void) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5AC_init, FAIL) /* FUNC_ENTER() does all the work */ done: FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5AC_init_interface * * Purpose: Initialize interface-specific information * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Thursday, July 18, 2002 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t H5AC_init_interface(void) { #ifdef H5_HAVE_PARALLEL H5P_genclass_t *xfer_pclass; /* Dataset transfer property list class object */ H5P_genplist_t *xfer_plist; /* Dataset transfer property list object */ unsigned block_before_meta_write; /* "block before meta write" property value */ unsigned library_internal=1; /* "library internal" property value */ H5FD_mpio_xfer_t xfer_mode; /* I/O transfer mode property value */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5AC_init_interface) /* Sanity check */ HDassert(H5P_CLS_DATASET_XFER_g!=(-1)); /* Get the dataset transfer property list class object */ if (NULL == (xfer_pclass = H5I_object(H5P_CLS_DATASET_XFER_g))) HGOTO_ERROR(H5E_CACHE, H5E_BADATOM, FAIL, "can't get property list class") /* Get an ID for the blocking, collective H5AC dxpl */ if ((H5AC_dxpl_id=H5P_create_id(xfer_pclass)) < 0) HGOTO_ERROR(H5E_CACHE, H5E_CANTCREATE, FAIL, "unable to register property list") /* Get the property list object */ if (NULL == (xfer_plist = H5I_object(H5AC_dxpl_id))) HGOTO_ERROR(H5E_CACHE, H5E_BADATOM, FAIL, "can't get new property list object") /* Insert 'block before metadata write' property */ block_before_meta_write=1; if(H5P_insert(xfer_plist,H5AC_BLOCK_BEFORE_META_WRITE_NAME,H5AC_BLOCK_BEFORE_META_WRITE_SIZE,&block_before_meta_write,NULL,NULL,NULL,NULL,NULL,NULL)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't insert metadata cache dxpl property") /* Insert 'library internal' property */ if(H5P_insert(xfer_plist,H5AC_LIBRARY_INTERNAL_NAME,H5AC_LIBRARY_INTERNAL_SIZE,&library_internal,NULL,NULL,NULL,NULL,NULL,NULL)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't insert metadata cache dxpl property") /* Set the transfer mode */ xfer_mode=H5FD_MPIO_COLLECTIVE; if (H5P_set(xfer_plist,H5D_XFER_IO_XFER_MODE_NAME,&xfer_mode)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "unable to set value") /* Get an ID for the non-blocking, collective H5AC dxpl */ if ((H5AC_noblock_dxpl_id=H5P_create_id(xfer_pclass)) < 0) HGOTO_ERROR(H5E_CACHE, H5E_CANTCREATE, FAIL, "unable to register property list") /* Get the property list object */ if (NULL == (xfer_plist = H5I_object(H5AC_noblock_dxpl_id))) HGOTO_ERROR(H5E_CACHE, H5E_BADATOM, FAIL, "can't get new property list object") /* Insert 'block before metadata write' property */ block_before_meta_write=0; if(H5P_insert(xfer_plist,H5AC_BLOCK_BEFORE_META_WRITE_NAME,H5AC_BLOCK_BEFORE_META_WRITE_SIZE,&block_before_meta_write,NULL,NULL,NULL,NULL,NULL,NULL)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't insert metadata cache dxpl property") /* Insert 'library internal' property */ if(H5P_insert(xfer_plist,H5AC_LIBRARY_INTERNAL_NAME,H5AC_LIBRARY_INTERNAL_SIZE,&library_internal,NULL,NULL,NULL,NULL,NULL,NULL)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't insert metadata cache dxpl property") /* Set the transfer mode */ xfer_mode=H5FD_MPIO_COLLECTIVE; if (H5P_set(xfer_plist,H5D_XFER_IO_XFER_MODE_NAME,&xfer_mode)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "unable to set value") /* Get an ID for the non-blocking, independent H5AC dxpl */ if ((H5AC_ind_dxpl_id=H5P_create_id(xfer_pclass)) < 0) HGOTO_ERROR(H5E_CACHE, H5E_CANTCREATE, FAIL, "unable to register property list") /* Get the property list object */ if (NULL == (xfer_plist = H5I_object(H5AC_ind_dxpl_id))) HGOTO_ERROR(H5E_CACHE, H5E_BADATOM, FAIL, "can't get new property list object") /* Insert 'block before metadata write' property */ block_before_meta_write=0; if(H5P_insert(xfer_plist,H5AC_BLOCK_BEFORE_META_WRITE_NAME,H5AC_BLOCK_BEFORE_META_WRITE_SIZE,&block_before_meta_write,NULL,NULL,NULL,NULL,NULL,NULL)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't insert metadata cache dxpl property") /* Insert 'library internal' property */ if(H5P_insert(xfer_plist,H5AC_LIBRARY_INTERNAL_NAME,H5AC_LIBRARY_INTERNAL_SIZE,&library_internal,NULL,NULL,NULL,NULL,NULL,NULL)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't insert metadata cache dxpl property") /* Set the transfer mode */ xfer_mode=H5FD_MPIO_INDEPENDENT; if (H5P_set(xfer_plist,H5D_XFER_IO_XFER_MODE_NAME,&xfer_mode)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "unable to set value") done: FUNC_LEAVE_NOAPI(ret_value) #else /* H5_HAVE_PARALLEL */ FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5AC_init_interface) /* Sanity check */ assert(H5P_LST_DATASET_XFER_g!=(-1)); H5AC_dxpl_id=H5P_DATASET_XFER_DEFAULT; H5AC_noblock_dxpl_id=H5P_DATASET_XFER_DEFAULT; H5AC_ind_dxpl_id=H5P_DATASET_XFER_DEFAULT; FUNC_LEAVE_NOAPI(SUCCEED) #endif /* H5_HAVE_PARALLEL */ } /* end H5AC_init_interface() */ /*------------------------------------------------------------------------- * Function: H5AC_term_interface * * Purpose: Terminate this interface. * * Return: Success: Positive if anything was done that might * affect other interfaces; zero otherwise. * * Failure: Negative. * * Programmer: Quincey Koziol * Thursday, July 18, 2002 * * Modifications: * *------------------------------------------------------------------------- */ int H5AC_term_interface(void) { int n=0; FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5AC_term_interface) if (interface_initialize_g) { #ifdef H5_HAVE_PARALLEL if(H5AC_dxpl_id>0 || H5AC_noblock_dxpl_id>0 || H5AC_ind_dxpl_id>0) { /* Indicate more work to do */ n = 1; /* H5I */ /* Close H5AC dxpl */ if (H5I_dec_ref(H5AC_dxpl_id) < 0 || H5I_dec_ref(H5AC_noblock_dxpl_id) < 0 || H5I_dec_ref(H5AC_ind_dxpl_id) < 0) H5E_clear(); /*ignore error*/ else { /* Reset static IDs */ H5AC_dxpl_id=(-1); H5AC_noblock_dxpl_id=(-1); H5AC_ind_dxpl_id=(-1); /* Reset interface initialization flag */ interface_initialize_g = 0; } /* end else */ } /* end if */ else #else /* H5_HAVE_PARALLEL */ /* Reset static IDs */ H5AC_dxpl_id=(-1); H5AC_noblock_dxpl_id=(-1); H5AC_ind_dxpl_id=(-1); #endif /* H5_HAVE_PARALLEL */ /* Reset interface initialization flag */ interface_initialize_g = 0; } /* end if */ FUNC_LEAVE_NOAPI(n) } /* end H5AC_term_interface() */ /*------------------------------------------------------------------------- * Function: H5AC_create * * Purpose: Initialize the cache just after a file is opened. The * SIZE_HINT is the number of cache slots desired. If you * pass an invalid value then H5AC_NSLOTS is used. You can * turn off caching by using 1 for the SIZE_HINT value. * * Return: Success: Number of slots actually used. * * Failure: Negative * * Programmer: Robb Matzke * matzke@llnl.gov * Jul 9 1997 * * Modifications: * * Complete re-design and re-write to support the re-designed * metadata cache. * * At present, the size_hint is ignored, and the * max_cache_size and min_clean_size fields are hard * coded. This should be fixed, but a parameter * list change will be required, so I will leave it * for now. * * Since no-one seems to care, the function now returns * one on success. * JRM - 4/28/04 * * Reworked the function again after abstracting its guts to * the similar function in H5C.c. The function is now a * wrapper for H5C_create(). * JRM - 6/4/04 *------------------------------------------------------------------------- */ const char * H5AC_entry_type_names[H5AC_NTYPES] = { "B-tree nodes", "symbol table nodes", "local heaps", "global heaps", "object headers" }; int H5AC_create(const H5F_t *f, int UNUSED size_hint) { H5AC_t *cache = NULL; int ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5AC_create, FAIL) HDassert(f); HDassert(NULL == f->shared->cache); /* this is test code that should be removed when we start passing * in proper size hints. * -- JRM */ cache = H5C_create(H5C__DEFAULT_MAX_CACHE_SIZE, H5C__DEFAULT_MIN_CLEAN_SIZE, (H5AC_NTYPES - 1), (const char **)H5AC_entry_type_names, H5AC_check_if_write_permitted); if ( NULL == cache ) { HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed") } else { f->shared->cache = cache; } done: if ( ret_value < 0 ) { if ( cache != NULL ) { H5C_dest_empty(cache); f->shared->cache = NULL; } /* end if */ } /* end if */ FUNC_LEAVE_NOAPI(ret_value) } /* H5AC_create() */ /*------------------------------------------------------------------------- * Function: H5AC_dest * * Purpose: Flushes all data to disk and destroys the cache. * This function fails if any object are protected since the * resulting file might not be consistent. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * matzke@llnl.gov * Jul 9 1997 * * Modifications: * * Complete re-design and re-write to support the re-designed * metadata cache. * JRM - 5/12/04 * * Abstracted the guts of the function to H5C_dest() in H5C.c, * and then re-wrote the function as a wrapper for H5C_dest(). * * JRM - 6/7/04 * *------------------------------------------------------------------------- */ herr_t H5AC_dest(H5F_t *f, hid_t dxpl_id) { H5AC_t *cache = NULL; herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5AC_dest, FAIL) assert(f); assert(f->shared->cache); cache = f->shared->cache; f->shared->cache = NULL; if ( H5C_dest(f, dxpl_id, H5AC_noblock_dxpl_id, cache) < 0 ) { HGOTO_ERROR(H5E_CACHE, H5E_CANTFREE, FAIL, "can't destroy cache") } done: FUNC_LEAVE_NOAPI(ret_value) } /* H5AC_dest() */ /*------------------------------------------------------------------------- * Function: H5AC_flush * * Purpose: Flush (and possibly destroy) the metadata cache associated * with the specified file. * * This is a re-write of an earlier version of the function * which was reputedly capable of flushing (and destroying * if requested) individual entries, individual entries if * they match the supplied type, all entries of a given type, * as well as all entries in the cache. * * As only this last capability is actually used at present, * I have not implemented the other capabilities in this * version of the function. * * The type and addr parameters are retained to avoid source * code changed, but values other than NULL and HADDR_UNDEF * respectively are errors. If all goes well, they should * be removed, and the function renamed to something more * descriptive -- perhaps H5AC_flush_cache. * * If the cache contains protected entries, the function will * fail, as protected entries cannot be flushed. However * all unprotected entries should be flushed before the * function returns failure. * * For historical purposes, the original version of the * purpose section is reproduced below: * * ============ Original Version of "Purpose:" ============ * * Flushes (and destroys if DESTROY is non-zero) the specified * entry from the cache. If the entry TYPE is CACHE_FREE and * ADDR is HADDR_UNDEF then all types of entries are * flushed. If TYPE is CACHE_FREE and ADDR is defined then * whatever is cached at ADDR is flushed. Otherwise the thing * at ADDR is flushed if it is the correct type. * * If there are protected objects they will not be flushed. * However, an attempt will be made to flush all non-protected * items before this function returns failure. * * Return: Non-negative on success/Negative on failure if there was a * request to flush all items and something was protected. * * Programmer: Robb Matzke * matzke@llnl.gov * Jul 9 1997 * * Modifications: * Robb Matzke, 1999-07-27 * The ADDR argument is passed by value. * * Complete re-write. See above for details. -- JRM 5/11/04 * * Abstracted the guts of the function to H5C_dest() in H5C.c, * and then re-wrote the function as a wrapper for H5C_dest(). * * JRM - 6/7/04 * *------------------------------------------------------------------------- */ herr_t H5AC_flush(H5F_t *f, hid_t dxpl_id, unsigned flags) { herr_t status; herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5AC_flush, FAIL) HDassert(f); HDassert(f->shared->cache); status = H5C_flush_cache(f, dxpl_id, H5AC_noblock_dxpl_id, f->shared->cache, flags); if ( status < 0 ) { HGOTO_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "Can't flush entry.") } done: FUNC_LEAVE_NOAPI(ret_value) } /* H5AC_flush() */ /*------------------------------------------------------------------------- * Function: H5AC_set * * Purpose: Adds the specified thing to the cache. The thing need not * exist on disk yet, but it must have an address and disk * space reserved. * * If H5AC_DEBUG is defined then this function checks * that the object being inserted isn't a protected object. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * matzke@llnl.gov * Jul 9 1997 * * Modifications: * Robb Matzke, 1999-07-27 * The ADDR argument is passed by value. * * Bill Wendling, 2003-09-16 * Added automatic "flush" if the FPHDF5 driver is being * used. This'll write the metadata to the SAP where other, * lesser processes can grab it. * * JRM - 5/13/04 * Complete re-write for the new metadata cache. The new * code is functionally almost identical to the old, although * the sanity check for a protected entry is now an assert * at the beginning of the function. * * JRM - 6/7/04 * Abstracted the guts of the function to H5C_insert_entry() * in H5C.c, and then re-wrote the function as a wrapper for * H5C_insert_entry(). * *------------------------------------------------------------------------- */ herr_t H5AC_set(H5F_t *f, hid_t dxpl_id, const H5AC_class_t *type, haddr_t addr, void *thing) { herr_t result; H5AC_info_t *info; H5AC_t *cache; herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5AC_set, FAIL) HDassert(f); HDassert(f->shared->cache); HDassert(type); HDassert(type->flush); HDassert(type->size); HDassert(H5F_addr_defined(addr)); HDassert(thing); /* Get local copy of this information */ cache = f->shared->cache; info = (H5AC_info_t *)thing; info->addr = addr; info->type = type; info->is_protected = FALSE; result = H5C_insert_entry(f, dxpl_id, H5AC_noblock_dxpl_id, cache, type, addr, thing); if ( result < 0 ) { HGOTO_ERROR(H5E_CACHE, H5E_CANTLOAD, FAIL, "H5C_insert_entry() failed") } done: FUNC_LEAVE_NOAPI(ret_value) } /* H5AC_set() */ /*------------------------------------------------------------------------- * Function: H5AC_rename * * Purpose: Use this function to notify the cache that an object's * file address changed. * * If H5AC_DEBUG is defined then this function checks * that the old and new addresses don't correspond to the * address of a protected object. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * matzke@llnl.gov * Jul 9 1997 * * Modifications: * Robb Matzke, 1999-07-27 * The OLD_ADDR and NEW_ADDR arguments are passed by value. * * JRM 5/17/04 * Complete rewrite for the new meta-data cache. * * JRM - 6/7/04 * Abstracted the guts of the function to H5C_rename_entry() * in H5C.c, and then re-wrote the function as a wrapper for * H5C_rename_entry(). * *------------------------------------------------------------------------- */ herr_t H5AC_rename(H5F_t *f, hid_t UNUSED dxpl_id, const H5AC_class_t *type, haddr_t old_addr, haddr_t new_addr) { herr_t result; herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5AC_rename, FAIL) HDassert(f); HDassert(f->shared->cache); HDassert(type); HDassert(H5F_addr_defined(old_addr)); HDassert(H5F_addr_defined(new_addr)); HDassert(H5F_addr_ne(old_addr, new_addr)); result = H5C_rename_entry(f, f->shared->cache, type, old_addr, new_addr); if ( result < 0 ) { HGOTO_ERROR(H5E_CACHE, H5E_CANTLOAD, FAIL, \ "H5C_rename_entry() failed.") } done: FUNC_LEAVE_NOAPI(ret_value) } /* H5AC_rename() */ /*------------------------------------------------------------------------- * Function: H5AC_protect * * Purpose: If the target entry is not in the cache, load it. If * necessary, attempt to evict one or more entries to keep * the cache within its maximum size. * * Mark the target entry as protected, and return its address * to the caller. The caller must call H5AC_unprotect() when * finished with the entry. * * While it is protected, the entry may not be either evicted * or flushed -- nor may it be accessed by another call to * H5AC_protect. Any attempt to do so will result in a failure. * * This comment is a re-write of the original Purpose: section. * For historical interest, the original version is reproduced * below: * * Original Purpose section: * * Similar to H5AC_find() except the object is removed from * the cache and given to the caller, preventing other parts * of the program from modifying the protected object or * preempting it from the cache. * * The caller must call H5AC_unprotect() when finished with * the pointer. * * If H5AC_DEBUG is defined then we check that the * requested object isn't already protected. * * Return: Success: Ptr to the object. * * Failure: NULL * * Programmer: Robb Matzke * matzke@llnl.gov * Sep 2 1997 * * Modifications: * Robb Matzke, 1999-07-27 * The ADDR argument is passed by value. * * Bill Wendling, 2003-09-10 * Added parameter to indicate whether this is a READ or * WRITE type of protect. * * JRM -- 5/17/04 * Complete re-write for the new client cache. See revised * Purpose section above. * * JRM - 6/7/04 * Abstracted the guts of the function to H5C_protect() * in H5C.c, and then re-wrote the function as a wrapper for * H5C_protect(). * *------------------------------------------------------------------------- */ void * H5AC_protect(H5F_t *f, hid_t dxpl_id, const H5AC_class_t *type, haddr_t addr, const void *udata1, void *udata2, H5AC_protect_t UNUSED rw) { void * thing = NULL; void * ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5AC_protect, NULL) /* check args */ HDassert(f); HDassert(f->shared->cache); HDassert(type); HDassert(type->flush); HDassert(type->load); HDassert(H5F_addr_defined(addr)); thing = H5C_protect(f, dxpl_id, H5AC_noblock_dxpl_id, f->shared->cache, type, addr, udata1, udata2); if ( thing == NULL ) { HGOTO_ERROR(H5E_CACHE, H5E_PROTECT, NULL, "H5C_protect() failed.") } /* Set return value */ ret_value = thing; done: FUNC_LEAVE_NOAPI(ret_value) } /* H5AC_protect() */ /*------------------------------------------------------------------------- * Function: H5AC_unprotect * * Purpose: Undo an H5AC_protect() call -- specifically, mark the * entry as unprotected, remove it from the protected list, * and give it back to the replacement policy. * * The TYPE and ADDR arguments must be the same as those in * the corresponding call to H5AC_protect() and the THING * argument must be the value returned by that call to * H5AC_protect(). * * If the deleted flag is TRUE, simply remove the target entry * from the cache, clear it, and free it without writing it to * disk. * * This verion of the function is a complete re-write to * use the new metadata cache. While there isn't all that * much difference between the old and new Purpose sections, * the original version is given below. * * Original purpose section: * * This function should be called to undo the effect of * H5AC_protect(). The TYPE and ADDR arguments should be the * same as the corresponding call to H5AC_protect() and the * THING argument should be the value returned by H5AC_protect(). * If the DELETED flag is set, then this object has been deleted * from the file and should not be returned to the cache. * * If H5AC_DEBUG is defined then this function fails * if the TYPE and ADDR arguments are not what was used when the * object was protected or if the object was never protected. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * matzke@llnl.gov * Sep 2 1997 * * Modifications: * Robb Matzke, 1999-07-27 * The ADDR argument is passed by value. * * Quincey Koziol, 2003-03-19 * Added "deleted" argument * * Bill Wendling, 2003-09-18 * If this is an FPHDF5 driver and the data is dirty, * perform a "flush" that writes the data to the SAP. * * John Mainzer 5/19/04 * Complete re-write for the new metadata cache. * * JRM - 6/7/04 * Abstracted the guts of the function to H5C_unprotect() * in H5C.c, and then re-wrote the function as a wrapper for * H5C_unprotect(). * *------------------------------------------------------------------------- */ herr_t H5AC_unprotect(H5F_t *f, hid_t dxpl_id, const H5AC_class_t *type, haddr_t addr, void *thing, hbool_t deleted) { herr_t result; herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5AC_unprotect, FAIL) HDassert(f); HDassert(f->shared->cache); HDassert(type); HDassert(type->clear); HDassert(type->flush); HDassert(H5F_addr_defined(addr)); HDassert(thing); HDassert( ((H5AC_info_t *)thing)->addr == addr ); HDassert( ((H5AC_info_t *)thing)->type == type ); result = H5C_unprotect(f, dxpl_id, H5AC_noblock_dxpl_id, f->shared->cache, type, addr, thing, deleted); if ( result < 0 ) { HGOTO_ERROR(H5E_CACHE, H5E_NOTCACHED, FAIL, \ "H5C_unprotect() failed.") } done: FUNC_LEAVE_NOAPI(ret_value) } /* H5AC_unprotect() */ /*------------------------------------------------------------------------- * Function: H5AC_stats * * Purpose: Prints statistics about the cache. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Thursday, October 30, 1997 * * Modifications: * John Mainzer 5/19/04 * Re-write to support the new metadata cache. * * JRM - 6/7/04 * Abstracted the guts of the function to H5C_stats() * in H5C.c, and then re-wrote the function as a wrapper for * H5C_stats(). * *------------------------------------------------------------------------- */ herr_t H5AC_stats(H5F_t UNUSED *f) { herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5AC_stats, FAIL) HDassert(f); HDassert(f->shared->cache); H5C_stats(f->shared->cache, f->name, FALSE); /* at present, this can't fail */ done: FUNC_LEAVE_NOAPI(ret_value) } /* H5AC_stats() */ /*************************************************************************/ /**************************** Private Functions: *************************/ /*************************************************************************/ /*------------------------------------------------------------------------- * * Function: H5AC_check_if_write_permitted * * Purpose: Determine if a write is permitted under the current * circumstances, and set *write_permitted_ptr accordingly. * As a general rule it is, but when we are running in parallel * mode with collective I/O, we must ensure that a read cannot * cause a write. * * In the event of failure, the value of *write_permitted_ptr * is undefined. * * Return: Non-negative on success/Negative on failure. * * Programmer: John Mainzer, 5/15/04 * * Modifications: * *------------------------------------------------------------------------- */ #ifdef H5_HAVE_PARALLEL static herr_t H5AC_check_if_write_permitted(H5F_t *f, hid_t dxpl_id, hbool_t * write_permitted_ptr) #else /* H5_HAVE_PARALLEL */ static herr_t H5AC_check_if_write_permitted(H5F_t UNUSED * f, hid_t UNUSED dxpl_id, hbool_t * write_permitted_ptr) #endif /* H5_HAVE_PARALLEL */ { hbool_t write_permitted = TRUE; herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5AC_check_if_write_permitted, FAIL) #ifdef H5_HAVE_PARALLEL if ( IS_H5FD_MPI(f) ) { H5P_genplist_t *dxpl; /* Dataset transfer property list */ H5FD_mpio_xfer_t xfer_mode; /* I/O transfer mode property value */ /* Get the dataset transfer property list */ if ( NULL == (dxpl = H5I_object(dxpl_id)) ) { HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, \ "not a dataset creation property list") } /* Get the transfer mode property */ if( H5P_get(dxpl, H5D_XFER_IO_XFER_MODE_NAME, &xfer_mode) < 0 ) { HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, \ "can't retrieve xfer mode") } if ( xfer_mode == H5FD_MPIO_INDEPENDENT ) { write_permitted = FALSE; } else { HDassert(xfer_mode == H5FD_MPIO_COLLECTIVE ); } } #endif /* H5_HAVE_PARALLEL */ *write_permitted_ptr = write_permitted; done: FUNC_LEAVE_NOAPI(ret_value) } /* H5AC_check_if_write_permitted() */