/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Programmer: John Mainzer -- 10/12/04 * * Purpose: This file contains declarations which are normally visible * only within the H5C package. * * Source files outside the H5C package should include * H5Cprivate.h instead. * * The one exception to this rule is test/cache.c. The test * code is easier to write if it can look at the cache's * internal data structures. Indeed, this is the main * reason why this file was created. */ #if !(defined H5C_FRIEND || defined H5C_MODULE) #error "Do not include this file outside the H5C package!" #endif #ifndef _H5Cpkg_H #define _H5Cpkg_H /* Get package's private header */ #include "H5Cprivate.h" /* Other private headers needed by this file */ #include "H5SLprivate.h" /* Skip lists */ /**************************/ /* Package Private Macros */ /**************************/ /* Number of epoch markers active */ #define H5C__MAX_EPOCH_MARKERS 10 /* Cache configuration settings */ #define H5C__HASH_TABLE_LEN (64 * 1024) /* must be a power of 2 */ #define H5C__H5C_T_MAGIC 0x005CAC0E /* Initial allocated size of the "flush_dep_parent" array */ #define H5C_FLUSH_DEP_PARENT_INIT 8 /**************************************************************************** * * We maintain doubly linked lists of instances of H5C_cache_entry_t for a * variety of reasons -- protected list, LRU list, and the clean and dirty * LRU lists at present. The following macros support linking and unlinking * of instances of H5C_cache_entry_t by both their regular and auxilary next * and previous pointers. * * The size and length fields are also maintained. * * Note that the relevant pair of prev and next pointers are presumed to be * NULL on entry in the insertion macros. * * Finally, observe that the sanity checking macros evaluate to the empty * string when H5C_DO_SANITY_CHECKS is FALSE. They also contain calls * to the HGOTO_ERROR macro, which may not be appropriate in all cases. * If so, we will need versions of the insertion and deletion macros which * do not reference the sanity checking macros. * JRM - 5/5/04 * * Changes: * * - Removed the line: * * ( ( (Size) == (entry_ptr)->size ) && ( (len) != 1 ) ) || * * from the H5C__DLL_PRE_REMOVE_SC macro. With the addition of the * epoch markers used in the age out based cache size reduction algorithm, * this invariant need not hold, as the epoch markers are of size 0. * * One could argue that I should have given the epoch markers a positive * size, but this would break the index_size = LRU_list_size + pl_size * + pel_size invariant. * * Alternatively, I could pass the current decr_mode in to the macro, * and just skip the check whenever epoch markers may be in use. * * However, any size errors should be caught when the cache is flushed * and destroyed. Until we are tracking such an error, this should be * good enough. * JRM - 12/9/04 * * * - In the H5C__DLL_PRE_INSERT_SC macro, replaced the lines: * * ( ( (len) == 1 ) && * ( ( (head_ptr) != (tail_ptr) ) || ( (Size) <= 0 ) || * ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) * ) * ) || * * with: * * ( ( (len) == 1 ) && * ( ( (head_ptr) != (tail_ptr) ) || * ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) * ) * ) || * * Epoch markers have size 0, so we can now have a non-empty list with * zero size. Hence the "( (Size) <= 0 )" clause cause false failures * in the sanity check. Since "Size" is typically a size_t, it can't * take on negative values, and thus the revised clause "( (Size) < 0 )" * caused compiler warnings. * JRM - 12/22/04 * * - In the H5C__DLL_SC macro, replaced the lines: * * ( ( (len) == 1 ) && * ( ( (head_ptr) != (tail_ptr) ) || ( (cache_ptr)->size <= 0 ) || * ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) * ) * ) || * * with * * ( ( (len) == 1 ) && * ( ( (head_ptr) != (tail_ptr) ) || * ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) * ) * ) || * * Epoch markers have size 0, so we can now have a non-empty list with * zero size. Hence the "( (Size) <= 0 )" clause cause false failures * in the sanity check. Since "Size" is typically a size_t, it can't * take on negative values, and thus the revised clause "( (Size) < 0 )" * caused compiler warnings. * JRM - 1/10/05 * * - Added the H5C__DLL_UPDATE_FOR_SIZE_CHANGE macro and the associated * sanity checking macros. These macro are used to update the size of * a DLL when one of its entries changes size. * * JRM - 9/8/05 * * - Added macros supporting the index list -- a doubly liked list of * all entries in the index. This list is necessary to reduce the * cost of visiting all entries in the cache, which was previously * done via a scan of the hash table. * * JRM - 10/15/15 * ****************************************************************************/ #if H5C_DO_SANITY_CHECKS #define H5C__DLL_PRE_REMOVE_SC(entry_ptr, head_ptr, tail_ptr, len, Size, fv) \ if ( ( (head_ptr) == NULL ) || \ ( (tail_ptr) == NULL ) || \ ( (entry_ptr) == NULL ) || \ ( (len) <= 0 ) || \ ( (Size) < (entry_ptr)->size ) || \ ( ( (entry_ptr)->prev == NULL ) && ( (head_ptr) != (entry_ptr) ) ) || \ ( ( (entry_ptr)->next == NULL ) && ( (tail_ptr) != (entry_ptr) ) ) || \ ( ( (len) == 1 ) && \ ( ! ( ( (head_ptr) == (entry_ptr) ) && \ ( (tail_ptr) == (entry_ptr) ) && \ ( (entry_ptr)->next == NULL ) && \ ( (entry_ptr)->prev == NULL ) && \ ( (Size) == (entry_ptr)->size ) \ ) \ ) \ ) \ ) { \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "DLL pre remove SC failed") \ } #define H5C__DLL_SC(head_ptr, tail_ptr, len, Size, fv) \ if ( ( ( ( (head_ptr) == NULL ) || ( (tail_ptr) == NULL ) ) && \ ( (head_ptr) != (tail_ptr) ) \ ) || \ ( (len) < 0 ) || \ ( (Size) < 0 ) || \ ( ( (len) == 1 ) && \ ( ( (head_ptr) != (tail_ptr) ) || \ ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) \ ) \ ) || \ ( ( (len) >= 1 ) && \ ( ( (head_ptr) == NULL ) || ( (head_ptr)->prev != NULL ) || \ ( (tail_ptr) == NULL ) || ( (tail_ptr)->next != NULL ) \ ) \ ) \ ) { \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "DLL sanity check failed") \ } #define H5C__DLL_PRE_INSERT_SC(entry_ptr, head_ptr, tail_ptr, len, Size, fv) \ if ( ( (entry_ptr) == NULL ) || \ ( (entry_ptr)->next != NULL ) || \ ( (entry_ptr)->prev != NULL ) || \ ( ( ( (head_ptr) == NULL ) || ( (tail_ptr) == NULL ) ) && \ ( (head_ptr) != (tail_ptr) ) \ ) || \ ( ( (len) == 1 ) && \ ( ( (head_ptr) != (tail_ptr) ) || \ ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) \ ) \ ) || \ ( ( (len) >= 1 ) && \ ( ( (head_ptr) == NULL ) || ( (head_ptr)->prev != NULL ) || \ ( (tail_ptr) == NULL ) || ( (tail_ptr)->next != NULL ) \ ) \ ) \ ) { \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "DLL pre insert SC failed") \ } #define H5C__DLL_PRE_SIZE_UPDATE_SC(dll_len, dll_size, old_size, new_size) \ if ( ( (dll_len) <= 0 ) || \ ( (dll_size) <= 0 ) || \ ( (old_size) <= 0 ) || \ ( (old_size) > (dll_size) ) || \ ( (new_size) <= 0 ) || \ ( ( (dll_len) == 1 ) && ( (old_size) != (dll_size) ) ) ) { \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "DLL pre size update SC failed") \ } #define H5C__DLL_POST_SIZE_UPDATE_SC(dll_len, dll_size, old_size, new_size) \ if ( ( (new_size) > (dll_size) ) || \ ( ( (dll_len) == 1 ) && ( (new_size) != (dll_size) ) ) ) { \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "DLL post size update SC failed") \ } #else /* H5C_DO_SANITY_CHECKS */ #define H5C__DLL_PRE_REMOVE_SC(entry_ptr, head_ptr, tail_ptr, len, Size, fv) #define H5C__DLL_SC(head_ptr, tail_ptr, len, Size, fv) #define H5C__DLL_PRE_INSERT_SC(entry_ptr, head_ptr, tail_ptr, len, Size, fv) #define H5C__DLL_PRE_SIZE_UPDATE_SC(dll_len, dll_size, old_size, new_size) #define H5C__DLL_POST_SIZE_UPDATE_SC(dll_len, dll_size, old_size, new_size) #endif /* H5C_DO_SANITY_CHECKS */ #define H5C__DLL_APPEND(entry_ptr, head_ptr, tail_ptr, len, Size, fail_val) \ { \ H5C__DLL_PRE_INSERT_SC(entry_ptr, head_ptr, tail_ptr, len, Size, \ fail_val) \ if ( (head_ptr) == NULL ) \ { \ (head_ptr) = (entry_ptr); \ (tail_ptr) = (entry_ptr); \ } \ else \ { \ (tail_ptr)->next = (entry_ptr); \ (entry_ptr)->prev = (tail_ptr); \ (tail_ptr) = (entry_ptr); \ } \ (len)++; \ (Size) += (entry_ptr)->size; \ } /* H5C__DLL_APPEND() */ #define H5C__DLL_PREPEND(entry_ptr, head_ptr, tail_ptr, len, Size, fail_val) \ { \ H5C__DLL_PRE_INSERT_SC(entry_ptr, head_ptr, tail_ptr, len, Size, \ fail_val) \ if ( (head_ptr) == NULL ) \ { \ (head_ptr) = (entry_ptr); \ (tail_ptr) = (entry_ptr); \ } \ else \ { \ (head_ptr)->prev = (entry_ptr); \ (entry_ptr)->next = (head_ptr); \ (head_ptr) = (entry_ptr); \ } \ (len)++; \ (Size) += entry_ptr->size; \ } /* H5C__DLL_PREPEND() */ #define H5C__DLL_REMOVE(entry_ptr, head_ptr, tail_ptr, len, Size, fail_val) \ { \ H5C__DLL_PRE_REMOVE_SC(entry_ptr, head_ptr, tail_ptr, len, Size, \ fail_val) \ { \ if ( (head_ptr) == (entry_ptr) ) \ { \ (head_ptr) = (entry_ptr)->next; \ if ( (head_ptr) != NULL ) \ (head_ptr)->prev = NULL; \ } \ else \ (entry_ptr)->prev->next = (entry_ptr)->next; \ if ( (tail_ptr) == (entry_ptr) ) \ { \ (tail_ptr) = (entry_ptr)->prev; \ if ( (tail_ptr) != NULL ) \ (tail_ptr)->next = NULL; \ } \ else \ (entry_ptr)->next->prev = (entry_ptr)->prev; \ entry_ptr->next = NULL; \ entry_ptr->prev = NULL; \ (len)--; \ (Size) -= entry_ptr->size; \ } \ } /* H5C__DLL_REMOVE() */ #define H5C__DLL_UPDATE_FOR_SIZE_CHANGE(dll_len, dll_size, old_size, new_size) \ { \ H5C__DLL_PRE_SIZE_UPDATE_SC(dll_len, dll_size, old_size, new_size) \ (dll_size) -= (old_size); \ (dll_size) += (new_size); \ H5C__DLL_POST_SIZE_UPDATE_SC(dll_len, dll_size, old_size, new_size) \ } /* H5C__DLL_UPDATE_FOR_SIZE_CHANGE() */ #if H5C_DO_SANITY_CHECKS #define H5C__AUX_DLL_PRE_REMOVE_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) \ if ( ( (hd_ptr) == NULL ) || \ ( (tail_ptr) == NULL ) || \ ( (entry_ptr) == NULL ) || \ ( (len) <= 0 ) || \ ( (Size) < (entry_ptr)->size ) || \ ( ( (Size) == (entry_ptr)->size ) && ( ! ( (len) == 1 ) ) ) || \ ( ( (entry_ptr)->aux_prev == NULL ) && ( (hd_ptr) != (entry_ptr) ) ) || \ ( ( (entry_ptr)->aux_next == NULL ) && ( (tail_ptr) != (entry_ptr) ) ) || \ ( ( (len) == 1 ) && \ ( ! ( ( (hd_ptr) == (entry_ptr) ) && ( (tail_ptr) == (entry_ptr) ) && \ ( (entry_ptr)->aux_next == NULL ) && \ ( (entry_ptr)->aux_prev == NULL ) && \ ( (Size) == (entry_ptr)->size ) \ ) \ ) \ ) \ ) { \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "aux DLL pre remove SC failed") \ } #define H5C__AUX_DLL_SC(head_ptr, tail_ptr, len, Size, fv) \ if ( ( ( ( (head_ptr) == NULL ) || ( (tail_ptr) == NULL ) ) && \ ( (head_ptr) != (tail_ptr) ) \ ) || \ ( (len) < 0 ) || \ ( (Size) < 0 ) || \ ( ( (len) == 1 ) && \ ( ( (head_ptr) != (tail_ptr) ) || ( (Size) <= 0 ) || \ ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) \ ) \ ) || \ ( ( (len) >= 1 ) && \ ( ( (head_ptr) == NULL ) || ( (head_ptr)->aux_prev != NULL ) || \ ( (tail_ptr) == NULL ) || ( (tail_ptr)->aux_next != NULL ) \ ) \ ) \ ) { \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "AUX DLL sanity check failed") \ } #define H5C__AUX_DLL_PRE_INSERT_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) \ if ( ( (entry_ptr) == NULL ) || \ ( (entry_ptr)->aux_next != NULL ) || \ ( (entry_ptr)->aux_prev != NULL ) || \ ( ( ( (hd_ptr) == NULL ) || ( (tail_ptr) == NULL ) ) && \ ( (hd_ptr) != (tail_ptr) ) \ ) || \ ( (len) < 0 ) || \ ( ( (len) == 1 ) && \ ( ( (hd_ptr) != (tail_ptr) ) || ( (Size) <= 0 ) || \ ( (hd_ptr) == NULL ) || ( (hd_ptr)->size != (Size) ) \ ) \ ) || \ ( ( (len) >= 1 ) && \ ( ( (hd_ptr) == NULL ) || ( (hd_ptr)->aux_prev != NULL ) || \ ( (tail_ptr) == NULL ) || ( (tail_ptr)->aux_next != NULL ) \ ) \ ) \ ) { \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "AUX DLL pre insert SC failed") \ } #else /* H5C_DO_SANITY_CHECKS */ #define H5C__AUX_DLL_PRE_REMOVE_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) #define H5C__AUX_DLL_SC(head_ptr, tail_ptr, len, Size, fv) #define H5C__AUX_DLL_PRE_INSERT_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) #endif /* H5C_DO_SANITY_CHECKS */ #define H5C__AUX_DLL_APPEND(entry_ptr, head_ptr, tail_ptr, len, Size, fail_val)\ { \ H5C__AUX_DLL_PRE_INSERT_SC(entry_ptr, head_ptr, tail_ptr, len, Size, \ fail_val) \ if ( (head_ptr) == NULL ) \ { \ (head_ptr) = (entry_ptr); \ (tail_ptr) = (entry_ptr); \ } \ else \ { \ (tail_ptr)->aux_next = (entry_ptr); \ (entry_ptr)->aux_prev = (tail_ptr); \ (tail_ptr) = (entry_ptr); \ } \ (len)++; \ (Size) += entry_ptr->size; \ } /* H5C__AUX_DLL_APPEND() */ #define H5C__AUX_DLL_PREPEND(entry_ptr, head_ptr, tail_ptr, len, Size, fv) \ { \ H5C__AUX_DLL_PRE_INSERT_SC(entry_ptr, head_ptr, tail_ptr, len, Size, fv) \ if ( (head_ptr) == NULL ) \ { \ (head_ptr) = (entry_ptr); \ (tail_ptr) = (entry_ptr); \ } \ else \ { \ (head_ptr)->aux_prev = (entry_ptr); \ (entry_ptr)->aux_next = (head_ptr); \ (head_ptr) = (entry_ptr); \ } \ (len)++; \ (Size) += entry_ptr->size; \ } /* H5C__AUX_DLL_PREPEND() */ #define H5C__AUX_DLL_REMOVE(entry_ptr, head_ptr, tail_ptr, len, Size, fv) \ { \ H5C__AUX_DLL_PRE_REMOVE_SC(entry_ptr, head_ptr, tail_ptr, len, Size, fv) \ { \ if ( (head_ptr) == (entry_ptr) ) \ { \ (head_ptr) = (entry_ptr)->aux_next; \ if ( (head_ptr) != NULL ) \ (head_ptr)->aux_prev = NULL; \ } \ else \ (entry_ptr)->aux_prev->aux_next = (entry_ptr)->aux_next; \ if ( (tail_ptr) == (entry_ptr) ) \ { \ (tail_ptr) = (entry_ptr)->aux_prev; \ if ( (tail_ptr) != NULL ) \ (tail_ptr)->aux_next = NULL; \ } \ else \ (entry_ptr)->aux_next->aux_prev = (entry_ptr)->aux_prev; \ entry_ptr->aux_next = NULL; \ entry_ptr->aux_prev = NULL; \ (len)--; \ (Size) -= entry_ptr->size; \ } \ } /* H5C__AUX_DLL_REMOVE() */ #if H5C_DO_SANITY_CHECKS #define H5C__IL_DLL_PRE_REMOVE_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) \ if ( ( (hd_ptr) == NULL ) || \ ( (tail_ptr) == NULL ) || \ ( (entry_ptr) == NULL ) || \ ( (len) <= 0 ) || \ ( (Size) < (entry_ptr)->size ) || \ ( ( (Size) == (entry_ptr)->size ) && ( ! ( (len) == 1 ) ) ) || \ ( ( (entry_ptr)->il_prev == NULL ) && ( (hd_ptr) != (entry_ptr) ) ) || \ ( ( (entry_ptr)->il_next == NULL ) && ( (tail_ptr) != (entry_ptr) ) ) || \ ( ( (len) == 1 ) && \ ( ! ( ( (hd_ptr) == (entry_ptr) ) && ( (tail_ptr) == (entry_ptr) ) && \ ( (entry_ptr)->il_next == NULL ) && \ ( (entry_ptr)->il_prev == NULL ) && \ ( (Size) == (entry_ptr)->size ) \ ) \ ) \ ) \ ) { \ HDassert(0 && "il DLL pre remove SC failed"); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "il DLL pre remove SC failed") \ } #define H5C__IL_DLL_PRE_INSERT_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) \ if ( ( (entry_ptr) == NULL ) || \ ( (entry_ptr)->il_next != NULL ) || \ ( (entry_ptr)->il_prev != NULL ) || \ ( ( ( (hd_ptr) == NULL ) || ( (tail_ptr) == NULL ) ) && \ ( (hd_ptr) != (tail_ptr) ) \ ) || \ ( ( (len) == 1 ) && \ ( ( (hd_ptr) != (tail_ptr) ) || ( (Size) <= 0 ) || \ ( (hd_ptr) == NULL ) || ( (hd_ptr)->size != (Size) ) \ ) \ ) || \ ( ( (len) >= 1 ) && \ ( ( (hd_ptr) == NULL ) || ( (hd_ptr)->il_prev != NULL ) || \ ( (tail_ptr) == NULL ) || ( (tail_ptr)->il_next != NULL ) \ ) \ ) \ ) { \ HDassert(0 && "IL DLL pre insert SC failed"); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "IL DLL pre insert SC failed") \ } #define H5C__IL_DLL_SC(head_ptr, tail_ptr, len, Size, fv) \ if ( ( ( ( (head_ptr) == NULL ) || ( (tail_ptr) == NULL ) ) && \ ( (head_ptr) != (tail_ptr) ) \ ) || \ ( ( (len) == 1 ) && \ ( ( (head_ptr) != (tail_ptr) ) || \ ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) \ ) \ ) || \ ( ( (len) >= 1 ) && \ ( ( (head_ptr) == NULL ) || ( (head_ptr)->il_prev != NULL ) || \ ( (tail_ptr) == NULL ) || ( (tail_ptr)->il_next != NULL ) \ ) \ ) \ ) { \ HDassert(0 && "IL DLL sanity check failed"); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "IL DLL sanity check failed") \ } #else /* H5C_DO_SANITY_CHECKS */ #define H5C__IL_DLL_PRE_REMOVE_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) #define H5C__IL_DLL_PRE_INSERT_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) #define H5C__IL_DLL_SC(head_ptr, tail_ptr, len, Size, fv) #endif /* H5C_DO_SANITY_CHECKS */ #define H5C__IL_DLL_APPEND(entry_ptr, head_ptr, tail_ptr, len, Size, fail_val)\ { \ H5C__IL_DLL_PRE_INSERT_SC(entry_ptr, head_ptr, tail_ptr, len, Size, \ fail_val) \ if ( (head_ptr) == NULL ) \ { \ (head_ptr) = (entry_ptr); \ (tail_ptr) = (entry_ptr); \ } \ else \ { \ (tail_ptr)->il_next = (entry_ptr); \ (entry_ptr)->il_prev = (tail_ptr); \ (tail_ptr) = (entry_ptr); \ } \ (len)++; \ (Size) += entry_ptr->size; \ H5C__IL_DLL_SC(head_ptr, tail_ptr, len, Size, fail_val) \ } /* H5C__IL_DLL_APPEND() */ #define H5C__IL_DLL_REMOVE(entry_ptr, head_ptr, tail_ptr, len, Size, fv) \ { \ H5C__IL_DLL_PRE_REMOVE_SC(entry_ptr, head_ptr, tail_ptr, len, Size, fv) \ { \ if ( (head_ptr) == (entry_ptr) ) \ { \ (head_ptr) = (entry_ptr)->il_next; \ if ( (head_ptr) != NULL ) \ (head_ptr)->il_prev = NULL; \ } \ else \ (entry_ptr)->il_prev->il_next = (entry_ptr)->il_next; \ if ( (tail_ptr) == (entry_ptr) ) \ { \ (tail_ptr) = (entry_ptr)->il_prev; \ if ( (tail_ptr) != NULL ) \ (tail_ptr)->il_next = NULL; \ } \ else \ (entry_ptr)->il_next->il_prev = (entry_ptr)->il_prev; \ entry_ptr->il_next = NULL; \ entry_ptr->il_prev = NULL; \ (len)--; \ (Size) -= entry_ptr->size; \ } \ H5C__IL_DLL_SC(head_ptr, tail_ptr, len, Size, fv) \ } /* H5C__IL_DLL_REMOVE() */ /*********************************************************************** * * Stats collection macros * * The following macros must handle stats collection when this collection * is enabled, and evaluate to the empty string when it is not. * * The sole exception to this rule is * H5C__UPDATE_CACHE_HIT_RATE_STATS(), which is always active as * the cache hit rate stats are always collected and available. * ***********************************************************************/ #define H5C__UPDATE_CACHE_HIT_RATE_STATS(cache_ptr, hit) \ (cache_ptr->cache_accesses)++; \ if ( hit ) { \ (cache_ptr->cache_hits)++; \ } \ #if H5C_COLLECT_CACHE_STATS #define H5C__UPDATE_MAX_INDEX_SIZE_STATS(cache_ptr) \ if ( (cache_ptr)->index_size > (cache_ptr)->max_index_size ) \ (cache_ptr)->max_index_size = (cache_ptr)->index_size; \ if ( (cache_ptr)->clean_index_size > \ (cache_ptr)->max_clean_index_size ) \ (cache_ptr)->max_clean_index_size = \ (cache_ptr)->clean_index_size; \ if ( (cache_ptr)->dirty_index_size > \ (cache_ptr)->max_dirty_index_size ) \ (cache_ptr)->max_dirty_index_size = \ (cache_ptr)->dirty_index_size; #define H5C__UPDATE_STATS_FOR_DIRTY_PIN(cache_ptr, entry_ptr) \ (((cache_ptr)->dirty_pins)[(entry_ptr)->type->id])++; #define H5C__UPDATE_STATS_FOR_UNPROTECT(cache_ptr) \ if ( (cache_ptr)->slist_len > (cache_ptr)->max_slist_len ) \ (cache_ptr)->max_slist_len = (cache_ptr)->slist_len; \ if ( (cache_ptr)->slist_size > (cache_ptr)->max_slist_size ) \ (cache_ptr)->max_slist_size = (cache_ptr)->slist_size; \ if ( (cache_ptr)->pel_len > (cache_ptr)->max_pel_len ) \ (cache_ptr)->max_pel_len = (cache_ptr)->pel_len; \ if ( (cache_ptr)->pel_size > (cache_ptr)->max_pel_size ) \ (cache_ptr)->max_pel_size = (cache_ptr)->pel_size; #define H5C__UPDATE_STATS_FOR_MOVE(cache_ptr, entry_ptr) \ if ( cache_ptr->flush_in_progress ) \ ((cache_ptr)->cache_flush_moves[(entry_ptr)->type->id])++; \ if ( entry_ptr->flush_in_progress ) \ ((cache_ptr)->entry_flush_moves[(entry_ptr)->type->id])++; \ (((cache_ptr)->moves)[(entry_ptr)->type->id])++; \ (cache_ptr)->entries_relocated_counter++; #define H5C__UPDATE_STATS_FOR_ENTRY_SIZE_CHANGE(cache_ptr, entry_ptr, new_size)\ if ( cache_ptr->flush_in_progress ) \ ((cache_ptr)->cache_flush_size_changes[(entry_ptr)->type->id])++; \ if ( entry_ptr->flush_in_progress ) \ ((cache_ptr)->entry_flush_size_changes[(entry_ptr)->type->id])++; \ if ( (entry_ptr)->size < (new_size) ) { \ ((cache_ptr)->size_increases[(entry_ptr)->type->id])++; \ H5C__UPDATE_MAX_INDEX_SIZE_STATS(cache_ptr) \ if ( (cache_ptr)->slist_size > (cache_ptr)->max_slist_size ) \ (cache_ptr)->max_slist_size = (cache_ptr)->slist_size; \ if ( (cache_ptr)->pl_size > (cache_ptr)->max_pl_size ) \ (cache_ptr)->max_pl_size = (cache_ptr)->pl_size; \ } else if ( (entry_ptr)->size > (new_size) ) { \ ((cache_ptr)->size_decreases[(entry_ptr)->type->id])++; \ } #define H5C__UPDATE_STATS_FOR_HT_INSERTION(cache_ptr) \ (cache_ptr)->total_ht_insertions++; #define H5C__UPDATE_STATS_FOR_HT_DELETION(cache_ptr) \ (cache_ptr)->total_ht_deletions++; #define H5C__UPDATE_STATS_FOR_HT_SEARCH(cache_ptr, success, depth) \ if ( success ) { \ (cache_ptr)->successful_ht_searches++; \ (cache_ptr)->total_successful_ht_search_depth += depth; \ } else { \ (cache_ptr)->failed_ht_searches++; \ (cache_ptr)->total_failed_ht_search_depth += depth; \ } #define H5C__UPDATE_STATS_FOR_UNPIN(cache_ptr, entry_ptr) \ ((cache_ptr)->unpins)[(entry_ptr)->type->id]++; #define H5C__UPDATE_STATS_FOR_SLIST_SCAN_RESTART(cache_ptr) \ ((cache_ptr)->slist_scan_restarts)++; #define H5C__UPDATE_STATS_FOR_LRU_SCAN_RESTART(cache_ptr) \ ((cache_ptr)->LRU_scan_restarts)++; #define H5C__UPDATE_STATS_FOR_INDEX_SCAN_RESTART(cache_ptr) \ ((cache_ptr)->index_scan_restarts)++; #define H5C__UPDATE_STATS_FOR_CACHE_IMAGE_CREATE(cache_ptr) \ { \ (cache_ptr)->images_created++; \ } #define H5C__UPDATE_STATS_FOR_CACHE_IMAGE_LOAD(cache_ptr) \ { \ /* make sure image len is still good */ \ HDassert((cache_ptr)->image_len > 0); \ (cache_ptr)->images_loaded++; \ (cache_ptr)->last_image_size = (cache_ptr)->image_len; \ } #define H5C__UPDATE_STATS_FOR_PREFETCH(cache_ptr, dirty) \ { \ (cache_ptr)->prefetches++; \ if ( dirty ) \ (cache_ptr)->dirty_prefetches++; \ } #define H5C__UPDATE_STATS_FOR_PREFETCH_HIT(cache_ptr) \ { \ (cache_ptr)->prefetch_hits++; \ } #if H5C_COLLECT_CACHE_ENTRY_STATS #define H5C__RESET_CACHE_ENTRY_STATS(entry_ptr) \ { \ (entry_ptr)->accesses = 0; \ (entry_ptr)->clears = 0; \ (entry_ptr)->flushes = 0; \ (entry_ptr)->pins = 0; \ } #define H5C__UPDATE_STATS_FOR_CLEAR(cache_ptr, entry_ptr) \ { \ (((cache_ptr)->clears)[(entry_ptr)->type->id])++; \ if((entry_ptr)->is_pinned) \ (((cache_ptr)->pinned_clears)[(entry_ptr)->type->id])++; \ ((entry_ptr)->clears)++; \ } #define H5C__UPDATE_STATS_FOR_FLUSH(cache_ptr, entry_ptr) \ { \ (((cache_ptr)->flushes)[(entry_ptr)->type->id])++; \ if((entry_ptr)->is_pinned) \ (((cache_ptr)->pinned_flushes)[(entry_ptr)->type->id])++; \ ((entry_ptr)->flushes)++; \ } #define H5C__UPDATE_STATS_FOR_EVICTION(cache_ptr, entry_ptr, take_ownership) \ { \ if ( take_ownership ) \ (((cache_ptr)->take_ownerships)[(entry_ptr)->type->id])++; \ else \ (((cache_ptr)->evictions)[(entry_ptr)->type->id])++; \ if ( (entry_ptr)->accesses > \ ((cache_ptr)->max_accesses)[(entry_ptr)->type->id] ) \ ((cache_ptr)->max_accesses)[(entry_ptr)->type->id] = \ (entry_ptr)->accesses; \ if ( (entry_ptr)->accesses < \ ((cache_ptr)->min_accesses)[(entry_ptr)->type->id] ) \ ((cache_ptr)->min_accesses)[(entry_ptr)->type->id] = \ (entry_ptr)->accesses; \ if ( (entry_ptr)->clears > \ ((cache_ptr)->max_clears)[(entry_ptr)->type->id] ) \ ((cache_ptr)->max_clears)[(entry_ptr)->type->id] \ = (entry_ptr)->clears; \ if ( (entry_ptr)->flushes > \ ((cache_ptr)->max_flushes)[(entry_ptr)->type->id] ) \ ((cache_ptr)->max_flushes)[(entry_ptr)->type->id] \ = (entry_ptr)->flushes; \ if ( (entry_ptr)->size > \ ((cache_ptr)->max_size)[(entry_ptr)->type->id] ) \ ((cache_ptr)->max_size)[(entry_ptr)->type->id] \ = (entry_ptr)->size; \ if ( (entry_ptr)->pins > \ ((cache_ptr)->max_pins)[(entry_ptr)->type->id] ) \ ((cache_ptr)->max_pins)[(entry_ptr)->type->id] \ = (entry_ptr)->pins; \ } #define H5C__UPDATE_STATS_FOR_INSERTION(cache_ptr, entry_ptr) \ { \ (((cache_ptr)->insertions)[(entry_ptr)->type->id])++; \ if ( (entry_ptr)->is_pinned ) { \ (((cache_ptr)->pinned_insertions)[(entry_ptr)->type->id])++; \ ((cache_ptr)->pins)[(entry_ptr)->type->id]++; \ (entry_ptr)->pins++; \ if ( (cache_ptr)->pel_len > (cache_ptr)->max_pel_len ) \ (cache_ptr)->max_pel_len = (cache_ptr)->pel_len; \ if ( (cache_ptr)->pel_size > (cache_ptr)->max_pel_size ) \ (cache_ptr)->max_pel_size = (cache_ptr)->pel_size; \ } \ if ( (cache_ptr)->index_len > (cache_ptr)->max_index_len ) \ (cache_ptr)->max_index_len = (cache_ptr)->index_len; \ H5C__UPDATE_MAX_INDEX_SIZE_STATS(cache_ptr) \ if ( (cache_ptr)->slist_len > (cache_ptr)->max_slist_len ) \ (cache_ptr)->max_slist_len = (cache_ptr)->slist_len; \ if ( (cache_ptr)->slist_size > (cache_ptr)->max_slist_size ) \ (cache_ptr)->max_slist_size = (cache_ptr)->slist_size; \ if ( (entry_ptr)->size > \ ((cache_ptr)->max_size)[(entry_ptr)->type->id] ) \ ((cache_ptr)->max_size)[(entry_ptr)->type->id] \ = (entry_ptr)->size; \ cache_ptr->entries_inserted_counter++; \ } #define H5C__UPDATE_STATS_FOR_PROTECT(cache_ptr, entry_ptr, hit) \ { \ if ( hit ) \ ((cache_ptr)->hits)[(entry_ptr)->type->id]++; \ else \ ((cache_ptr)->misses)[(entry_ptr)->type->id]++; \ if ( ! ((entry_ptr)->is_read_only) ) { \ ((cache_ptr)->write_protects)[(entry_ptr)->type->id]++; \ } else { \ ((cache_ptr)->read_protects)[(entry_ptr)->type->id]++; \ if ( ((entry_ptr)->ro_ref_count) > \ ((cache_ptr)->max_read_protects)[(entry_ptr)->type->id] ) \ ((cache_ptr)->max_read_protects)[(entry_ptr)->type->id] = \ ((entry_ptr)->ro_ref_count); \ } \ if ( (cache_ptr)->index_len > (cache_ptr)->max_index_len ) \ (cache_ptr)->max_index_len = (cache_ptr)->index_len; \ H5C__UPDATE_MAX_INDEX_SIZE_STATS(cache_ptr) \ if ( (cache_ptr)->pl_len > (cache_ptr)->max_pl_len ) \ (cache_ptr)->max_pl_len = (cache_ptr)->pl_len; \ if ( (cache_ptr)->pl_size > (cache_ptr)->max_pl_size ) \ (cache_ptr)->max_pl_size = (cache_ptr)->pl_size; \ if ( (entry_ptr)->size > \ ((cache_ptr)->max_size)[(entry_ptr)->type->id] ) \ ((cache_ptr)->max_size)[(entry_ptr)->type->id] = (entry_ptr)->size; \ ((entry_ptr)->accesses)++; \ } #define H5C__UPDATE_STATS_FOR_PIN(cache_ptr, entry_ptr) \ { \ ((cache_ptr)->pins)[(entry_ptr)->type->id]++; \ (entry_ptr)->pins++; \ if ( (cache_ptr)->pel_len > (cache_ptr)->max_pel_len ) \ (cache_ptr)->max_pel_len = (cache_ptr)->pel_len; \ if ( (cache_ptr)->pel_size > (cache_ptr)->max_pel_size ) \ (cache_ptr)->max_pel_size = (cache_ptr)->pel_size; \ } #else /* H5C_COLLECT_CACHE_ENTRY_STATS */ #define H5C__RESET_CACHE_ENTRY_STATS(entry_ptr) #define H5C__UPDATE_STATS_FOR_CLEAR(cache_ptr, entry_ptr) \ { \ (((cache_ptr)->clears)[(entry_ptr)->type->id])++; \ if((entry_ptr)->is_pinned) \ (((cache_ptr)->pinned_clears)[(entry_ptr)->type->id])++; \ } #define H5C__UPDATE_STATS_FOR_FLUSH(cache_ptr, entry_ptr) \ { \ (((cache_ptr)->flushes)[(entry_ptr)->type->id])++; \ if ( (entry_ptr)->is_pinned ) \ (((cache_ptr)->pinned_flushes)[(entry_ptr)->type->id])++; \ } #define H5C__UPDATE_STATS_FOR_EVICTION(cache_ptr, entry_ptr, take_ownership) \ { \ if ( take_ownership ) \ (((cache_ptr)->take_ownerships)[(entry_ptr)->type->id])++; \ else \ (((cache_ptr)->evictions)[(entry_ptr)->type->id])++; \ } #define H5C__UPDATE_STATS_FOR_INSERTION(cache_ptr, entry_ptr) \ { \ (((cache_ptr)->insertions)[(entry_ptr)->type->id])++; \ if ( (entry_ptr)->is_pinned ) { \ (((cache_ptr)->pinned_insertions)[(entry_ptr)->type->id])++; \ ((cache_ptr)->pins)[(entry_ptr)->type->id]++; \ if ( (cache_ptr)->pel_len > (cache_ptr)->max_pel_len ) \ (cache_ptr)->max_pel_len = (cache_ptr)->pel_len; \ if ( (cache_ptr)->pel_size > (cache_ptr)->max_pel_size ) \ (cache_ptr)->max_pel_size = (cache_ptr)->pel_size; \ } \ if ( (cache_ptr)->index_len > (cache_ptr)->max_index_len ) \ (cache_ptr)->max_index_len = (cache_ptr)->index_len; \ H5C__UPDATE_MAX_INDEX_SIZE_STATS(cache_ptr) \ if ( (cache_ptr)->slist_len > (cache_ptr)->max_slist_len ) \ (cache_ptr)->max_slist_len = (cache_ptr)->slist_len; \ if ( (cache_ptr)->slist_size > (cache_ptr)->max_slist_size ) \ (cache_ptr)->max_slist_size = (cache_ptr)->slist_size; \ cache_ptr->entries_inserted_counter++; \ } #define H5C__UPDATE_STATS_FOR_PROTECT(cache_ptr, entry_ptr, hit) \ { \ if ( hit ) \ ((cache_ptr)->hits)[(entry_ptr)->type->id]++; \ else \ ((cache_ptr)->misses)[(entry_ptr)->type->id]++; \ if ( ! ((entry_ptr)->is_read_only) ) \ ((cache_ptr)->write_protects)[(entry_ptr)->type->id]++; \ else { \ ((cache_ptr)->read_protects)[(entry_ptr)->type->id]++; \ if ( ((entry_ptr)->ro_ref_count) > \ ((cache_ptr)->max_read_protects)[(entry_ptr)->type->id] ) \ ((cache_ptr)->max_read_protects)[(entry_ptr)->type->id] = \ ((entry_ptr)->ro_ref_count); \ } \ if ( (cache_ptr)->index_len > (cache_ptr)->max_index_len ) \ (cache_ptr)->max_index_len = (cache_ptr)->index_len; \ H5C__UPDATE_MAX_INDEX_SIZE_STATS(cache_ptr) \ if ( (cache_ptr)->pl_len > (cache_ptr)->max_pl_len ) \ (cache_ptr)->max_pl_len = (cache_ptr)->pl_len; \ if ( (cache_ptr)->pl_size > (cache_ptr)->max_pl_size ) \ (cache_ptr)->max_pl_size = (cache_ptr)->pl_size; \ } #define H5C__UPDATE_STATS_FOR_PIN(cache_ptr, entry_ptr) \ { \ ((cache_ptr)->pins)[(entry_ptr)->type->id]++; \ if ( (cache_ptr)->pel_len > (cache_ptr)->max_pel_len ) \ (cache_ptr)->max_pel_len = (cache_ptr)->pel_len; \ if ( (cache_ptr)->pel_size > (cache_ptr)->max_pel_size ) \ (cache_ptr)->max_pel_size = (cache_ptr)->pel_size; \ } #endif /* H5C_COLLECT_CACHE_ENTRY_STATS */ #else /* H5C_COLLECT_CACHE_STATS */ #define H5C__RESET_CACHE_ENTRY_STATS(entry_ptr) #define H5C__UPDATE_STATS_FOR_DIRTY_PIN(cache_ptr, entry_ptr) #define H5C__UPDATE_STATS_FOR_UNPROTECT(cache_ptr) #define H5C__UPDATE_STATS_FOR_MOVE(cache_ptr, entry_ptr) #define H5C__UPDATE_STATS_FOR_ENTRY_SIZE_CHANGE(cache_ptr, entry_ptr, new_size) #define H5C__UPDATE_STATS_FOR_HT_INSERTION(cache_ptr) #define H5C__UPDATE_STATS_FOR_HT_DELETION(cache_ptr) #define H5C__UPDATE_STATS_FOR_HT_SEARCH(cache_ptr, success, depth) #define H5C__UPDATE_STATS_FOR_INSERTION(cache_ptr, entry_ptr) #define H5C__UPDATE_STATS_FOR_CLEAR(cache_ptr, entry_ptr) #define H5C__UPDATE_STATS_FOR_FLUSH(cache_ptr, entry_ptr) #define H5C__UPDATE_STATS_FOR_EVICTION(cache_ptr, entry_ptr, take_ownership) #define H5C__UPDATE_STATS_FOR_PROTECT(cache_ptr, entry_ptr, hit) #define H5C__UPDATE_STATS_FOR_PIN(cache_ptr, entry_ptr) #define H5C__UPDATE_STATS_FOR_UNPIN(cache_ptr, entry_ptr) #define H5C__UPDATE_STATS_FOR_SLIST_SCAN_RESTART(cache_ptr) #define H5C__UPDATE_STATS_FOR_LRU_SCAN_RESTART(cache_ptr) #define H5C__UPDATE_STATS_FOR_INDEX_SCAN_RESTART(cache_ptr) #define H5C__UPDATE_STATS_FOR_CACHE_IMAGE_CREATE(cache_ptr) #define H5C__UPDATE_STATS_FOR_CACHE_IMAGE_LOAD(cache_ptr) #define H5C__UPDATE_STATS_FOR_PREFETCH(cache_ptr, dirty) #define H5C__UPDATE_STATS_FOR_PREFETCH_HIT(cache_ptr) #endif /* H5C_COLLECT_CACHE_STATS */ /*********************************************************************** * * Hash table access and manipulation macros: * * The following macros handle searches, insertions, and deletion in * the hash table. * * When modifying these macros, remember to modify the similar macros * in tst/cache.c * * Changes: * * - Updated existing index macros and sanity check macros to maintain * the clean_index_size and dirty_index_size fields of H5C_t. Also * added macros to allow us to track entry cleans and dirties. * * JRM -- 11/5/08 * * - Updated existing index macros and sanity check macros to maintain * the index_ring_len, index_ring_size, clean_index_ring_size, and * dirty_index_ring_size fields of H5C_t. * * JRM -- 9/1/15 * * - Updated existing index macros and sanity checks macros to * maintain an doubly linked list of all entries in the index. * This is necessary to reduce the computational cost of visiting * all entries in the index, which used to be done by scanning * the hash table. * * JRM -- 10/15/15 * ***********************************************************************/ /* H5C__HASH_TABLE_LEN is defined in H5Cpkg.h. It mut be a power of two. */ #define H5C__HASH_MASK ((size_t)(H5C__HASH_TABLE_LEN - 1) << 3) #define H5C__HASH_FCN(x) (int)((unsigned)((x) & H5C__HASH_MASK) >> 3) #if H5C_DO_SANITY_CHECKS #define H5C__PRE_HT_INSERT_SC(cache_ptr, entry_ptr, fail_val) \ if ( ( (cache_ptr) == NULL ) || \ ( (cache_ptr)->magic != H5C__H5C_T_MAGIC ) || \ ( (entry_ptr) == NULL ) || \ ( ! H5F_addr_defined((entry_ptr)->addr) ) || \ ( (entry_ptr)->ht_next != NULL ) || \ ( (entry_ptr)->ht_prev != NULL ) || \ ( (entry_ptr)->size <= 0 ) || \ ( H5C__HASH_FCN((entry_ptr)->addr) < 0 ) || \ ( H5C__HASH_FCN((entry_ptr)->addr) >= H5C__HASH_TABLE_LEN ) || \ ( (cache_ptr)->index_size != \ ((cache_ptr)->clean_index_size + \ (cache_ptr)->dirty_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->clean_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->dirty_index_size) ) || \ ( (entry_ptr)->ring <= H5C_RING_UNDEFINED ) || \ ( (entry_ptr)->ring >= H5C_RING_NTYPES ) || \ ( (cache_ptr)->index_ring_len[(entry_ptr)->ring] > \ (cache_ptr)->index_len ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] > \ (cache_ptr)->index_size ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] != \ ((cache_ptr)->clean_index_ring_size[(entry_ptr)->ring] + \ (cache_ptr)->dirty_index_ring_size[(entry_ptr)->ring]) ) || \ ( (cache_ptr)->index_len != (cache_ptr)->il_len ) || \ ( (cache_ptr)->index_size != (cache_ptr)->il_size ) ) { \ HDassert(FALSE); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, fail_val, "pre HT insert SC failed") \ } #define H5C__POST_HT_INSERT_SC(cache_ptr, entry_ptr, fail_val) \ if ( ( (cache_ptr) == NULL ) || \ ( (cache_ptr)->magic != H5C__H5C_T_MAGIC ) || \ ( (cache_ptr)->index_size != \ ((cache_ptr)->clean_index_size + \ (cache_ptr)->dirty_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->clean_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->dirty_index_size) ) || \ ( (cache_ptr)->index_ring_len[(entry_ptr)->ring] == 0 ) || \ ( (cache_ptr)->index_ring_len[(entry_ptr)->ring] > \ (cache_ptr)->index_len ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] > \ (cache_ptr)->index_size ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] != \ ((cache_ptr)->clean_index_ring_size[(entry_ptr)->ring] + \ (cache_ptr)->dirty_index_ring_size[(entry_ptr)->ring]) ) || \ ( (cache_ptr)->index_len != (cache_ptr)->il_len ) || \ ( (cache_ptr)->index_size != (cache_ptr)->il_size) ) { \ HDassert(FALSE); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, fail_val, "post HT insert SC failed") \ } #define H5C__PRE_HT_REMOVE_SC(cache_ptr, entry_ptr) \ if ( ( (cache_ptr) == NULL ) || \ ( (cache_ptr)->magic != H5C__H5C_T_MAGIC ) || \ ( (cache_ptr)->index_len < 1 ) || \ ( (entry_ptr) == NULL ) || \ ( (cache_ptr)->index_size < (entry_ptr)->size ) || \ ( ! H5F_addr_defined((entry_ptr)->addr) ) || \ ( (entry_ptr)->size <= 0 ) || \ ( H5C__HASH_FCN((entry_ptr)->addr) < 0 ) || \ ( H5C__HASH_FCN((entry_ptr)->addr) >= H5C__HASH_TABLE_LEN ) || \ ( ((cache_ptr)->index)[(H5C__HASH_FCN((entry_ptr)->addr))] \ == NULL ) || \ ( ( ((cache_ptr)->index)[(H5C__HASH_FCN((entry_ptr)->addr))] \ != (entry_ptr) ) && \ ( (entry_ptr)->ht_prev == NULL ) ) || \ ( ( ((cache_ptr)->index)[(H5C__HASH_FCN((entry_ptr)->addr))] == \ (entry_ptr) ) && \ ( (entry_ptr)->ht_prev != NULL ) ) || \ ( (cache_ptr)->index_size != \ ((cache_ptr)->clean_index_size + \ (cache_ptr)->dirty_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->clean_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->dirty_index_size) ) || \ ( (entry_ptr)->ring <= H5C_RING_UNDEFINED ) || \ ( (entry_ptr)->ring >= H5C_RING_NTYPES ) || \ ( (cache_ptr)->index_ring_len[(entry_ptr)->ring] <= 0 ) || \ ( (cache_ptr)->index_ring_len[(entry_ptr)->ring] > \ (cache_ptr)->index_len ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] < \ (entry_ptr)->size ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] > \ (cache_ptr)->index_size ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] != \ ((cache_ptr)->clean_index_ring_size[(entry_ptr)->ring] + \ (cache_ptr)->dirty_index_ring_size[(entry_ptr)->ring]) ) || \ ( (cache_ptr)->index_len != (cache_ptr)->il_len ) || \ ( (cache_ptr)->index_size != (cache_ptr)->il_size ) ) { \ HDassert(FALSE); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "pre HT remove SC failed") \ } #define H5C__POST_HT_REMOVE_SC(cache_ptr, entry_ptr) \ if ( ( (cache_ptr) == NULL ) || \ ( (cache_ptr)->magic != H5C__H5C_T_MAGIC ) || \ ( (entry_ptr) == NULL ) || \ ( ! H5F_addr_defined((entry_ptr)->addr) ) || \ ( (entry_ptr)->size <= 0 ) || \ ( (entry_ptr)->ht_prev != NULL ) || \ ( (entry_ptr)->ht_prev != NULL ) || \ ( (cache_ptr)->index_size != \ ((cache_ptr)->clean_index_size + \ (cache_ptr)->dirty_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->clean_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->dirty_index_size) ) || \ ( (cache_ptr)->index_ring_len[(entry_ptr)->ring] > \ (cache_ptr)->index_len ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] > \ (cache_ptr)->index_size ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] != \ ((cache_ptr)->clean_index_ring_size[(entry_ptr)->ring] + \ (cache_ptr)->dirty_index_ring_size[(entry_ptr)->ring]) ) || \ ( (cache_ptr)->index_len != (cache_ptr)->il_len ) || \ ( (cache_ptr)->index_size != (cache_ptr)->il_size ) ) { \ HDassert(FALSE); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "post HT remove SC failed") \ } /* (Keep in sync w/H5C_TEST__PRE_HT_SEARCH_SC macro in test/cache_common.h -QAK) */ #define H5C__PRE_HT_SEARCH_SC(cache_ptr, Addr, fail_val) \ if ( ( (cache_ptr) == NULL ) || \ ( (cache_ptr)->magic != H5C__H5C_T_MAGIC ) || \ ( (cache_ptr)->index_size != \ ((cache_ptr)->clean_index_size + (cache_ptr)->dirty_index_size) ) || \ ( ! H5F_addr_defined(Addr) ) || \ ( H5C__HASH_FCN(Addr) < 0 ) || \ ( H5C__HASH_FCN(Addr) >= H5C__HASH_TABLE_LEN ) ) { \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, fail_val, "pre HT search SC failed") \ } /* (Keep in sync w/H5C_TEST__POST_SUC_HT_SEARCH_SC macro in test/cache_common.h -QAK) */ #define H5C__POST_SUC_HT_SEARCH_SC(cache_ptr, entry_ptr, k, fail_val) \ if ( ( (cache_ptr) == NULL ) || \ ( (cache_ptr)->magic != H5C__H5C_T_MAGIC ) || \ ( (cache_ptr)->index_len < 1 ) || \ ( (entry_ptr) == NULL ) || \ ( (cache_ptr)->index_size < (entry_ptr)->size ) || \ ( (cache_ptr)->index_size != \ ((cache_ptr)->clean_index_size + (cache_ptr)->dirty_index_size) ) || \ ( (entry_ptr)->size <= 0 ) || \ ( ((cache_ptr)->index)[k] == NULL ) || \ ( ( ((cache_ptr)->index)[k] != (entry_ptr) ) && \ ( (entry_ptr)->ht_prev == NULL ) ) || \ ( ( ((cache_ptr)->index)[k] == (entry_ptr) ) && \ ( (entry_ptr)->ht_prev != NULL ) ) || \ ( ( (entry_ptr)->ht_prev != NULL ) && \ ( (entry_ptr)->ht_prev->ht_next != (entry_ptr) ) ) || \ ( ( (entry_ptr)->ht_next != NULL ) && \ ( (entry_ptr)->ht_next->ht_prev != (entry_ptr) ) ) ) { \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, fail_val, "post successful HT search SC failed") \ } /* (Keep in sync w/H5C_TEST__POST_HT_SHIFT_TO_FRONT macro in test/cache_common.h -QAK) */ #define H5C__POST_HT_SHIFT_TO_FRONT(cache_ptr, entry_ptr, k, fail_val) \ if ( ( (cache_ptr) == NULL ) || \ ( ((cache_ptr)->index)[k] != (entry_ptr) ) || \ ( (entry_ptr)->ht_prev != NULL ) ) { \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, fail_val, "post HT shift to front SC failed") \ } #define H5C__PRE_HT_ENTRY_SIZE_CHANGE_SC(cache_ptr, old_size, new_size, \ entry_ptr, was_clean) \ if ( ( (cache_ptr) == NULL ) || \ ( (cache_ptr)->index_len <= 0 ) || \ ( (cache_ptr)->index_size <= 0 ) || \ ( (new_size) <= 0 ) || \ ( (old_size) > (cache_ptr)->index_size ) || \ ( ( (cache_ptr)->index_len == 1 ) && \ ( (cache_ptr)->index_size != (old_size) ) ) || \ ( (cache_ptr)->index_size != \ ((cache_ptr)->clean_index_size + \ (cache_ptr)->dirty_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->clean_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->dirty_index_size) ) || \ ( ( !( was_clean ) || \ ( (cache_ptr)->clean_index_size < (old_size) ) ) && \ ( ( (was_clean) ) || \ ( (cache_ptr)->dirty_index_size < (old_size) ) ) ) || \ ( (entry_ptr) == NULL ) || \ ( (entry_ptr)->ring <= H5C_RING_UNDEFINED ) || \ ( (entry_ptr)->ring >= H5C_RING_NTYPES ) || \ ( (cache_ptr)->index_ring_len[(entry_ptr)->ring] <= 0 ) || \ ( (cache_ptr)->index_ring_len[(entry_ptr)->ring] > \ (cache_ptr)->index_len ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] > \ (cache_ptr)->index_size ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] != \ ((cache_ptr)->clean_index_ring_size[(entry_ptr)->ring] + \ (cache_ptr)->dirty_index_ring_size[(entry_ptr)->ring]) ) || \ ( (cache_ptr)->index_len != (cache_ptr)->il_len ) || \ ( (cache_ptr)->index_size != (cache_ptr)->il_size ) ) { \ HDassert(FALSE); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "pre HT entry size change SC failed") \ } #define H5C__POST_HT_ENTRY_SIZE_CHANGE_SC(cache_ptr, old_size, new_size, \ entry_ptr) \ if ( ( (cache_ptr) == NULL ) || \ ( (cache_ptr)->index_len <= 0 ) || \ ( (cache_ptr)->index_size <= 0 ) || \ ( (new_size) > (cache_ptr)->index_size ) || \ ( (cache_ptr)->index_size != \ ((cache_ptr)->clean_index_size + \ (cache_ptr)->dirty_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->clean_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->dirty_index_size) ) || \ ( ( !((entry_ptr)->is_dirty ) || \ ( (cache_ptr)->dirty_index_size < (new_size) ) ) && \ ( ( ((entry_ptr)->is_dirty) ) || \ ( (cache_ptr)->clean_index_size < (new_size) ) ) ) || \ ( ( (cache_ptr)->index_len == 1 ) && \ ( (cache_ptr)->index_size != (new_size) ) ) || \ ( (cache_ptr)->index_ring_len[(entry_ptr)->ring] > \ (cache_ptr)->index_len ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] > \ (cache_ptr)->index_size ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] != \ ((cache_ptr)->clean_index_ring_size[(entry_ptr)->ring] + \ (cache_ptr)->dirty_index_ring_size[(entry_ptr)->ring]) ) || \ ( (cache_ptr)->index_len != (cache_ptr)->il_len ) || \ ( (cache_ptr)->index_size != (cache_ptr)->il_size ) ) { \ HDassert(FALSE); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "post HT entry size change SC failed") \ } #define H5C__PRE_HT_UPDATE_FOR_ENTRY_CLEAN_SC(cache_ptr, entry_ptr) \ if ( \ ( (cache_ptr) == NULL ) || \ ( (cache_ptr)->magic != H5C__H5C_T_MAGIC ) || \ ( (cache_ptr)->index_len <= 0 ) || \ ( (entry_ptr) == NULL ) || \ ( (entry_ptr)->is_dirty != FALSE ) || \ ( (cache_ptr)->index_size < (entry_ptr)->size ) || \ ( (cache_ptr)->dirty_index_size < (entry_ptr)->size ) || \ ( (cache_ptr)->index_size != \ ((cache_ptr)->clean_index_size + (cache_ptr)->dirty_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->clean_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->dirty_index_size) ) || \ ( (entry_ptr)->ring <= H5C_RING_UNDEFINED ) || \ ( (entry_ptr)->ring >= H5C_RING_NTYPES ) || \ ( (cache_ptr)->index_ring_len[(entry_ptr)->ring] <= 0 ) || \ ( (cache_ptr)->index_ring_len[(entry_ptr)->ring] > \ (cache_ptr)->index_len ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] > \ (cache_ptr)->index_size ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] != \ ((cache_ptr)->clean_index_ring_size[(entry_ptr)->ring] + \ (cache_ptr)->dirty_index_ring_size[(entry_ptr)->ring]) ) ) { \ HDassert(FALSE); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "pre HT update for entry clean SC failed") \ } #define H5C__PRE_HT_UPDATE_FOR_ENTRY_DIRTY_SC(cache_ptr, entry_ptr) \ if ( \ ( (cache_ptr) == NULL ) || \ ( (cache_ptr)->magic != H5C__H5C_T_MAGIC ) || \ ( (cache_ptr)->index_len <= 0 ) || \ ( (entry_ptr) == NULL ) || \ ( (entry_ptr)->is_dirty != TRUE ) || \ ( (cache_ptr)->index_size < (entry_ptr)->size ) || \ ( (cache_ptr)->clean_index_size < (entry_ptr)->size ) || \ ( (cache_ptr)->index_size != \ ((cache_ptr)->clean_index_size + (cache_ptr)->dirty_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->clean_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->dirty_index_size) ) || \ ( (entry_ptr)->ring <= H5C_RING_UNDEFINED ) || \ ( (entry_ptr)->ring >= H5C_RING_NTYPES ) || \ ( (cache_ptr)->index_ring_len[(entry_ptr)->ring] <= 0 ) || \ ( (cache_ptr)->index_ring_len[(entry_ptr)->ring] > \ (cache_ptr)->index_len ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] > \ (cache_ptr)->index_size ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] != \ ((cache_ptr)->clean_index_ring_size[(entry_ptr)->ring] + \ (cache_ptr)->dirty_index_ring_size[(entry_ptr)->ring]) ) ) { \ HDassert(FALSE); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "pre HT update for entry dirty SC failed") \ } #define H5C__POST_HT_UPDATE_FOR_ENTRY_CLEAN_SC(cache_ptr, entry_ptr) \ if ( ( (cache_ptr)->index_size != \ ((cache_ptr)->clean_index_size + (cache_ptr)->dirty_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->clean_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->dirty_index_size) ) || \ ( (cache_ptr)->index_ring_len[(entry_ptr)->ring] > \ (cache_ptr)->index_len ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] > \ (cache_ptr)->index_size ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] != \ ((cache_ptr)->clean_index_ring_size[(entry_ptr)->ring] + \ (cache_ptr)->dirty_index_ring_size[(entry_ptr)->ring]) ) ) { \ HDassert(FALSE); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "post HT update for entry clean SC failed") \ } #define H5C__POST_HT_UPDATE_FOR_ENTRY_DIRTY_SC(cache_ptr, entry_ptr) \ if ( ( (cache_ptr)->index_size != \ ((cache_ptr)->clean_index_size + (cache_ptr)->dirty_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->clean_index_size) ) || \ ( (cache_ptr)->index_size < ((cache_ptr)->dirty_index_size) ) || \ ( (cache_ptr)->index_ring_len[(entry_ptr)->ring] > \ (cache_ptr)->index_len ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] > \ (cache_ptr)->index_size ) || \ ( (cache_ptr)->index_ring_size[(entry_ptr)->ring] != \ ((cache_ptr)->clean_index_ring_size[(entry_ptr)->ring] + \ (cache_ptr)->dirty_index_ring_size[(entry_ptr)->ring]) ) ) { \ HDassert(FALSE); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "post HT update for entry dirty SC failed") \ } #else /* H5C_DO_SANITY_CHECKS */ #define H5C__PRE_HT_INSERT_SC(cache_ptr, entry_ptr, fail_val) #define H5C__POST_HT_INSERT_SC(cache_ptr, entry_ptr, fail_val) #define H5C__PRE_HT_REMOVE_SC(cache_ptr, entry_ptr) #define H5C__POST_HT_REMOVE_SC(cache_ptr, entry_ptr) #define H5C__PRE_HT_SEARCH_SC(cache_ptr, Addr, fail_val) #define H5C__POST_SUC_HT_SEARCH_SC(cache_ptr, entry_ptr, k, fail_val) #define H5C__POST_HT_SHIFT_TO_FRONT(cache_ptr, entry_ptr, k, fail_val) #define H5C__PRE_HT_UPDATE_FOR_ENTRY_CLEAN_SC(cache_ptr, entry_ptr) #define H5C__PRE_HT_UPDATE_FOR_ENTRY_DIRTY_SC(cache_ptr, entry_ptr) #define H5C__PRE_HT_ENTRY_SIZE_CHANGE_SC(cache_ptr, old_size, new_size, \ entry_ptr, was_clean) #define H5C__POST_HT_ENTRY_SIZE_CHANGE_SC(cache_ptr, old_size, new_size, \ entry_ptr) #define H5C__POST_HT_UPDATE_FOR_ENTRY_CLEAN_SC(cache_ptr, entry_ptr) #define H5C__POST_HT_UPDATE_FOR_ENTRY_DIRTY_SC(cache_ptr, entry_ptr) #endif /* H5C_DO_SANITY_CHECKS */ #define H5C__INSERT_IN_INDEX(cache_ptr, entry_ptr, fail_val) \ { \ int k; \ H5C__PRE_HT_INSERT_SC(cache_ptr, entry_ptr, fail_val) \ k = H5C__HASH_FCN((entry_ptr)->addr); \ if(((cache_ptr)->index)[k] != NULL) { \ (entry_ptr)->ht_next = ((cache_ptr)->index)[k]; \ (entry_ptr)->ht_next->ht_prev = (entry_ptr); \ } \ ((cache_ptr)->index)[k] = (entry_ptr); \ (cache_ptr)->index_len++; \ (cache_ptr)->index_size += (entry_ptr)->size; \ ((cache_ptr)->index_ring_len[entry_ptr->ring])++; \ ((cache_ptr)->index_ring_size[entry_ptr->ring]) \ += (entry_ptr)->size; \ if((entry_ptr)->is_dirty) { \ (cache_ptr)->dirty_index_size += (entry_ptr)->size; \ ((cache_ptr)->dirty_index_ring_size[entry_ptr->ring]) \ += (entry_ptr)->size; \ } else { \ (cache_ptr)->clean_index_size += (entry_ptr)->size; \ ((cache_ptr)->clean_index_ring_size[entry_ptr->ring]) \ += (entry_ptr)->size; \ } \ if((entry_ptr)->flush_me_last) { \ (cache_ptr)->num_last_entries++; \ HDassert((cache_ptr)->num_last_entries <= 2); \ } \ H5C__IL_DLL_APPEND((entry_ptr), (cache_ptr)->il_head, \ (cache_ptr)->il_tail, (cache_ptr)->il_len, \ (cache_ptr)->il_size, fail_val) \ H5C__UPDATE_STATS_FOR_HT_INSERTION(cache_ptr) \ H5C__POST_HT_INSERT_SC(cache_ptr, entry_ptr, fail_val) \ } #define H5C__DELETE_FROM_INDEX(cache_ptr, entry_ptr, fail_val) \ { \ int k; \ H5C__PRE_HT_REMOVE_SC(cache_ptr, entry_ptr) \ k = H5C__HASH_FCN((entry_ptr)->addr); \ if((entry_ptr)->ht_next) \ (entry_ptr)->ht_next->ht_prev = (entry_ptr)->ht_prev; \ if((entry_ptr)->ht_prev) \ (entry_ptr)->ht_prev->ht_next = (entry_ptr)->ht_next; \ if(((cache_ptr)->index)[k] == (entry_ptr)) \ ((cache_ptr)->index)[k] = (entry_ptr)->ht_next; \ (entry_ptr)->ht_next = NULL; \ (entry_ptr)->ht_prev = NULL; \ (cache_ptr)->index_len--; \ (cache_ptr)->index_size -= (entry_ptr)->size; \ ((cache_ptr)->index_ring_len[entry_ptr->ring])--; \ ((cache_ptr)->index_ring_size[entry_ptr->ring]) \ -= (entry_ptr)->size; \ if((entry_ptr)->is_dirty) { \ (cache_ptr)->dirty_index_size -= (entry_ptr)->size; \ ((cache_ptr)->dirty_index_ring_size[entry_ptr->ring]) \ -= (entry_ptr)->size; \ } else { \ (cache_ptr)->clean_index_size -= (entry_ptr)->size; \ ((cache_ptr)->clean_index_ring_size[entry_ptr->ring]) \ -= (entry_ptr)->size; \ } \ if((entry_ptr)->flush_me_last) { \ (cache_ptr)->num_last_entries--; \ HDassert((cache_ptr)->num_last_entries <= 1); \ } \ H5C__IL_DLL_REMOVE((entry_ptr), (cache_ptr)->il_head, \ (cache_ptr)->il_tail, (cache_ptr)->il_len, \ (cache_ptr)->il_size, fail_val) \ H5C__UPDATE_STATS_FOR_HT_DELETION(cache_ptr) \ H5C__POST_HT_REMOVE_SC(cache_ptr, entry_ptr) \ } #define H5C__SEARCH_INDEX(cache_ptr, Addr, entry_ptr, fail_val) \ { \ int k; \ int depth = 0; \ H5C__PRE_HT_SEARCH_SC(cache_ptr, Addr, fail_val) \ k = H5C__HASH_FCN(Addr); \ entry_ptr = ((cache_ptr)->index)[k]; \ while(entry_ptr) { \ if(H5F_addr_eq(Addr, (entry_ptr)->addr)) { \ H5C__POST_SUC_HT_SEARCH_SC(cache_ptr, entry_ptr, k, fail_val) \ if(entry_ptr != ((cache_ptr)->index)[k]) { \ if((entry_ptr)->ht_next) \ (entry_ptr)->ht_next->ht_prev = (entry_ptr)->ht_prev; \ HDassert((entry_ptr)->ht_prev != NULL); \ (entry_ptr)->ht_prev->ht_next = (entry_ptr)->ht_next; \ ((cache_ptr)->index)[k]->ht_prev = (entry_ptr); \ (entry_ptr)->ht_next = ((cache_ptr)->index)[k]; \ (entry_ptr)->ht_prev = NULL; \ ((cache_ptr)->index)[k] = (entry_ptr); \ H5C__POST_HT_SHIFT_TO_FRONT(cache_ptr, entry_ptr, k, fail_val) \ } \ break; \ } \ (entry_ptr) = (entry_ptr)->ht_next; \ (depth)++; \ } \ H5C__UPDATE_STATS_FOR_HT_SEARCH(cache_ptr, (entry_ptr != NULL), depth) \ } #define H5C__SEARCH_INDEX_NO_STATS(cache_ptr, Addr, entry_ptr, fail_val) \ { \ int k; \ H5C__PRE_HT_SEARCH_SC(cache_ptr, Addr, fail_val) \ k = H5C__HASH_FCN(Addr); \ entry_ptr = ((cache_ptr)->index)[k]; \ while(entry_ptr) { \ if(H5F_addr_eq(Addr, (entry_ptr)->addr)) { \ H5C__POST_SUC_HT_SEARCH_SC(cache_ptr, entry_ptr, k, fail_val) \ if(entry_ptr != ((cache_ptr)->index)[k]) { \ if((entry_ptr)->ht_next) \ (entry_ptr)->ht_next->ht_prev = (entry_ptr)->ht_prev; \ HDassert((entry_ptr)->ht_prev != NULL); \ (entry_ptr)->ht_prev->ht_next = (entry_ptr)->ht_next; \ ((cache_ptr)->index)[k]->ht_prev = (entry_ptr); \ (entry_ptr)->ht_next = ((cache_ptr)->index)[k]; \ (entry_ptr)->ht_prev = NULL; \ ((cache_ptr)->index)[k] = (entry_ptr); \ H5C__POST_HT_SHIFT_TO_FRONT(cache_ptr, entry_ptr, k, fail_val) \ } \ break; \ } \ (entry_ptr) = (entry_ptr)->ht_next; \ } \ } #define H5C__UPDATE_INDEX_FOR_ENTRY_CLEAN(cache_ptr, entry_ptr) \ { \ H5C__PRE_HT_UPDATE_FOR_ENTRY_CLEAN_SC(cache_ptr, entry_ptr); \ (cache_ptr)->dirty_index_size -= (entry_ptr)->size; \ ((cache_ptr)->dirty_index_ring_size[entry_ptr->ring]) \ -= (entry_ptr)->size; \ (cache_ptr)->clean_index_size += (entry_ptr)->size; \ ((cache_ptr)->clean_index_ring_size[entry_ptr->ring]) \ += (entry_ptr)->size; \ H5C__POST_HT_UPDATE_FOR_ENTRY_CLEAN_SC(cache_ptr, entry_ptr); \ } #define H5C__UPDATE_INDEX_FOR_ENTRY_DIRTY(cache_ptr, entry_ptr) \ { \ H5C__PRE_HT_UPDATE_FOR_ENTRY_DIRTY_SC(cache_ptr, entry_ptr); \ (cache_ptr)->clean_index_size -= (entry_ptr)->size; \ ((cache_ptr)->clean_index_ring_size[entry_ptr->ring]) \ -= (entry_ptr)->size; \ (cache_ptr)->dirty_index_size += (entry_ptr)->size; \ ((cache_ptr)->dirty_index_ring_size[entry_ptr->ring]) \ += (entry_ptr)->size; \ H5C__POST_HT_UPDATE_FOR_ENTRY_DIRTY_SC(cache_ptr, entry_ptr); \ } #define H5C__UPDATE_INDEX_FOR_SIZE_CHANGE(cache_ptr, old_size, new_size, \ entry_ptr, was_clean) \ { \ H5C__PRE_HT_ENTRY_SIZE_CHANGE_SC(cache_ptr, old_size, new_size, \ entry_ptr, was_clean) \ (cache_ptr)->index_size -= (old_size); \ (cache_ptr)->index_size += (new_size); \ ((cache_ptr)->index_ring_size[entry_ptr->ring]) -= (old_size); \ ((cache_ptr)->index_ring_size[entry_ptr->ring]) += (new_size); \ if(was_clean) { \ (cache_ptr)->clean_index_size -= (old_size); \ ((cache_ptr)->clean_index_ring_size[entry_ptr->ring])-= (old_size); \ } else { \ (cache_ptr)->dirty_index_size -= (old_size); \ ((cache_ptr)->dirty_index_ring_size[entry_ptr->ring])-= (old_size); \ } \ if((entry_ptr)->is_dirty) { \ (cache_ptr)->dirty_index_size += (new_size); \ ((cache_ptr)->dirty_index_ring_size[entry_ptr->ring])+= (new_size); \ } else { \ (cache_ptr)->clean_index_size += (new_size); \ ((cache_ptr)->clean_index_ring_size[entry_ptr->ring])+= (new_size); \ } \ H5C__DLL_UPDATE_FOR_SIZE_CHANGE((cache_ptr)->il_len, \ (cache_ptr)->il_size, \ (old_size), (new_size)) \ H5C__POST_HT_ENTRY_SIZE_CHANGE_SC(cache_ptr, old_size, new_size, \ entry_ptr) \ } /************************************************************************** * * Skip list insertion and deletion macros: * * These used to be functions, but I converted them to macros to avoid some * function call overhead. * **************************************************************************/ /*------------------------------------------------------------------------- * * Macro: H5C__INSERT_ENTRY_IN_SLIST * * Purpose: Insert the specified instance of H5C_cache_entry_t into * the skip list in the specified instance of H5C_t. Update * the associated length and size fields. * * Return: N/A * * Programmer: John Mainzer, 5/10/04 * * Modifications: * * JRM -- 7/21/04 * Updated function to set the in_tree flag when inserting * an entry into the tree. Also modified the function to * update the tree size and len fields instead of the similar * index fields. * * All of this is part of the modifications to support the * hash table. * * JRM -- 7/27/04 * Converted the function H5C_insert_entry_in_tree() into * the macro H5C__INSERT_ENTRY_IN_TREE in the hopes of * wringing a little more speed out of the cache. * * Note that we don't bother to check if the entry is already * in the tree -- if it is, H5SL_insert() will fail. * * QAK -- 11/27/04 * Switched over to using skip list routines. * * JRM -- 6/27/06 * Added fail_val parameter. * * JRM -- 8/25/06 * Added the H5C_DO_SANITY_CHECKS version of the macro. * * This version maintains the slist_len_increase and * slist_size_increase fields that are used in sanity * checks in the flush routines. * * All this is needed as the fractal heap needs to be * able to dirty, resize and/or move entries during the * flush. * * JRM -- 12/13/14 * Added code to set cache_ptr->slist_changed to TRUE * when an entry is inserted in the slist. * * JRM -- 9/1/15 * Added code to maintain the cache_ptr->slist_ring_len * and cache_ptr->slist_ring_size arrays. * *------------------------------------------------------------------------- */ #if H5C_DO_SLIST_SANITY_CHECKS #define ENTRY_IN_SLIST(cache_ptr, entry_ptr) \ H5C_entry_in_skip_list((cache_ptr), (entry_ptr)) #else /* H5C_DO_SLIST_SANITY_CHECKS */ #define ENTRY_IN_SLIST(cache_ptr, entry_ptr) FALSE #endif /* H5C_DO_SLIST_SANITY_CHECKS */ #if H5C_DO_SANITY_CHECKS #define H5C__INSERT_ENTRY_IN_SLIST(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( (entry_ptr)->size > 0 ); \ HDassert( H5F_addr_defined((entry_ptr)->addr) ); \ HDassert( !((entry_ptr)->in_slist) ); \ HDassert( !ENTRY_IN_SLIST((cache_ptr), (entry_ptr)) ); \ HDassert( (entry_ptr)->ring > H5C_RING_UNDEFINED ); \ HDassert( (entry_ptr)->ring < H5C_RING_NTYPES ); \ HDassert( (cache_ptr)->slist_ring_len[(entry_ptr)->ring] <= \ (cache_ptr)->slist_len ); \ HDassert( (cache_ptr)->slist_ring_size[(entry_ptr)->ring] <= \ (cache_ptr)->slist_size ); \ \ if(H5SL_insert((cache_ptr)->slist_ptr, entry_ptr, &(entry_ptr)->addr) < 0) \ HGOTO_ERROR(H5E_CACHE, H5E_BADVALUE, (fail_val), "Can't insert entry in skip list") \ \ (entry_ptr)->in_slist = TRUE; \ (cache_ptr)->slist_changed = TRUE; \ (cache_ptr)->slist_len++; \ (cache_ptr)->slist_size += (entry_ptr)->size; \ ((cache_ptr)->slist_ring_len[(entry_ptr)->ring])++; \ ((cache_ptr)->slist_ring_size[(entry_ptr)->ring]) += (entry_ptr)->size; \ (cache_ptr)->slist_len_increase++; \ (cache_ptr)->slist_size_increase += (int64_t)((entry_ptr)->size); \ \ HDassert( (cache_ptr)->slist_len > 0 ); \ HDassert( (cache_ptr)->slist_size > 0 ); \ \ } /* H5C__INSERT_ENTRY_IN_SLIST */ #else /* H5C_DO_SANITY_CHECKS */ #define H5C__INSERT_ENTRY_IN_SLIST(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( (entry_ptr)->size > 0 ); \ HDassert( H5F_addr_defined((entry_ptr)->addr) ); \ HDassert( !((entry_ptr)->in_slist) ); \ HDassert( !ENTRY_IN_SLIST((cache_ptr), (entry_ptr)) ); \ HDassert( (entry_ptr)->ring > H5C_RING_UNDEFINED ); \ HDassert( (entry_ptr)->ring < H5C_RING_NTYPES ); \ HDassert( (cache_ptr)->slist_ring_len[(entry_ptr)->ring] <= \ (cache_ptr)->slist_len ); \ HDassert( (cache_ptr)->slist_ring_size[(entry_ptr)->ring] <= \ (cache_ptr)->slist_size ); \ \ if(H5SL_insert((cache_ptr)->slist_ptr, entry_ptr, &(entry_ptr)->addr) < 0) \ HGOTO_ERROR(H5E_CACHE, H5E_BADVALUE, (fail_val), \ "Can't insert entry in skip list") \ \ (entry_ptr)->in_slist = TRUE; \ (cache_ptr)->slist_changed = TRUE; \ (cache_ptr)->slist_len++; \ (cache_ptr)->slist_size += (entry_ptr)->size; \ ((cache_ptr)->slist_ring_len[(entry_ptr)->ring])++; \ ((cache_ptr)->slist_ring_size[(entry_ptr)->ring]) += (entry_ptr)->size; \ \ HDassert( (cache_ptr)->slist_len > 0 ); \ HDassert( (cache_ptr)->slist_size > 0 ); \ \ } /* H5C__INSERT_ENTRY_IN_SLIST */ #endif /* H5C_DO_SANITY_CHECKS */ /*------------------------------------------------------------------------- * * Function: H5C__REMOVE_ENTRY_FROM_SLIST * * Purpose: Remove the specified instance of H5C_cache_entry_t from the * index skip list in the specified instance of H5C_t. Update * the associated length and size fields. * * Return: N/A * * Programmer: John Mainzer, 5/10/04 * *------------------------------------------------------------------------- */ #if H5C_DO_SANITY_CHECKS #define H5C__REMOVE_ENTRY_FROM_SLIST(cache_ptr, entry_ptr, during_flush) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->size > 0 ); \ HDassert( (entry_ptr)->in_slist ); \ HDassert( (cache_ptr)->slist_ptr ); \ HDassert( (entry_ptr)->ring > H5C_RING_UNDEFINED ); \ HDassert( (entry_ptr)->ring < H5C_RING_NTYPES ); \ HDassert( (cache_ptr)->slist_ring_len[(entry_ptr)->ring] <= \ (cache_ptr)->slist_len ); \ HDassert( (cache_ptr)->slist_ring_size[(entry_ptr)->ring] <= \ (cache_ptr)->slist_size ); \ \ if ( H5SL_remove((cache_ptr)->slist_ptr, &(entry_ptr)->addr) \ != (entry_ptr) ) \ HGOTO_ERROR(H5E_CACHE, H5E_BADVALUE, FAIL, "can't delete entry from skip list") \ \ HDassert( (cache_ptr)->slist_len > 0 ); \ if(!(during_flush)) \ (cache_ptr)->slist_changed = TRUE; \ (cache_ptr)->slist_len--; \ HDassert( (cache_ptr)->slist_size >= (entry_ptr)->size ); \ (cache_ptr)->slist_size -= (entry_ptr)->size; \ ((cache_ptr)->slist_ring_len[(entry_ptr)->ring])--; \ HDassert( (cache_ptr)->slist_ring_size[(entry_ptr->ring)] >= \ (entry_ptr)->size ); \ ((cache_ptr)->slist_ring_size[(entry_ptr)->ring]) -= (entry_ptr)->size; \ (cache_ptr)->slist_len_increase--; \ (cache_ptr)->slist_size_increase -= (int64_t)((entry_ptr)->size); \ (entry_ptr)->in_slist = FALSE; \ } /* H5C__REMOVE_ENTRY_FROM_SLIST */ #else /* H5C_DO_SANITY_CHECKS */ #define H5C__REMOVE_ENTRY_FROM_SLIST(cache_ptr, entry_ptr, during_flush) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->in_slist ); \ HDassert( (cache_ptr)->slist_ptr ); \ HDassert( (entry_ptr)->ring > H5C_RING_UNDEFINED ); \ HDassert( (entry_ptr)->ring < H5C_RING_NTYPES ); \ HDassert( (cache_ptr)->slist_ring_len[(entry_ptr)->ring] <= \ (cache_ptr)->slist_len ); \ HDassert( (cache_ptr)->slist_ring_size[(entry_ptr)->ring] <= \ (cache_ptr)->slist_size ); \ \ if ( H5SL_remove((cache_ptr)->slist_ptr, &(entry_ptr)->addr) \ != (entry_ptr) ) \ HGOTO_ERROR(H5E_CACHE, H5E_BADVALUE, FAIL, \ "Can't delete entry from skip list.") \ \ HDassert( (cache_ptr)->slist_len > 0 ); \ if(!(during_flush)) \ (cache_ptr)->slist_changed = TRUE; \ (cache_ptr)->slist_len--; \ HDassert( (cache_ptr)->slist_size >= (entry_ptr)->size ); \ (cache_ptr)->slist_size -= (entry_ptr)->size; \ ((cache_ptr)->slist_ring_len[(entry_ptr)->ring])--; \ HDassert( (cache_ptr)->slist_ring_size[(entry_ptr->ring)] >= \ (entry_ptr)->size ); \ ((cache_ptr)->slist_ring_size[(entry_ptr)->ring]) -= (entry_ptr)->size; \ (entry_ptr)->in_slist = FALSE; \ } /* H5C__REMOVE_ENTRY_FROM_SLIST */ #endif /* H5C_DO_SANITY_CHECKS */ /*------------------------------------------------------------------------- * * Function: H5C__UPDATE_SLIST_FOR_SIZE_CHANGE * * Purpose: Update cache_ptr->slist_size for a change in the size of * and entry in the slist. * * Return: N/A * * Programmer: John Mainzer, 9/07/05 * * Modifications: * * JRM -- 8/27/06 * Added the H5C_DO_SANITY_CHECKS version of the macro. * * This version maintains the slist_size_increase field * that are used in sanity checks in the flush routines. * * All this is needed as the fractal heap needs to be * able to dirty, resize and/or move entries during the * flush. * * JRM -- 12/13/14 * Note that we do not set cache_ptr->slist_changed to TRUE * in this case, as the structure of the slist is not * modified. * * JRM -- 9/1/15 * Added code to maintain the cache_ptr->slist_ring_len * and cache_ptr->slist_ring_size arrays. * *------------------------------------------------------------------------- */ #if H5C_DO_SANITY_CHECKS #define H5C__UPDATE_SLIST_FOR_SIZE_CHANGE(cache_ptr, old_size, new_size) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (old_size) > 0 ); \ HDassert( (new_size) > 0 ); \ HDassert( (old_size) <= (cache_ptr)->slist_size ); \ HDassert( (cache_ptr)->slist_len > 0 ); \ HDassert( ((cache_ptr)->slist_len > 1) || \ ( (cache_ptr)->slist_size == (old_size) ) ); \ HDassert( (entry_ptr)->ring > H5C_RING_UNDEFINED ); \ HDassert( (entry_ptr)->ring < H5C_RING_NTYPES ); \ HDassert( (cache_ptr)->slist_ring_len[(entry_ptr)->ring] <= \ (cache_ptr)->slist_len ); \ HDassert( (cache_ptr)->slist_ring_size[(entry_ptr)->ring] <= \ (cache_ptr)->slist_size ); \ \ (cache_ptr)->slist_size -= (old_size); \ (cache_ptr)->slist_size += (new_size); \ \ HDassert( (cache_ptr)->slist_ring_size[(entry_ptr->ring)] >=(old_size) ); \ ((cache_ptr)->slist_ring_size[(entry_ptr)->ring]) -= (old_size); \ ((cache_ptr)->slist_ring_size[(entry_ptr)->ring]) += (new_size); \ \ (cache_ptr)->slist_size_increase -= (int64_t)(old_size); \ (cache_ptr)->slist_size_increase += (int64_t)(new_size); \ \ HDassert( (new_size) <= (cache_ptr)->slist_size ); \ HDassert( ( (cache_ptr)->slist_len > 1 ) || \ ( (cache_ptr)->slist_size == (new_size) ) ); \ } /* H5C__UPDATE_SLIST_FOR_SIZE_CHANGE */ #else /* H5C_DO_SANITY_CHECKS */ #define H5C__UPDATE_SLIST_FOR_SIZE_CHANGE(cache_ptr, old_size, new_size) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (old_size) > 0 ); \ HDassert( (new_size) > 0 ); \ HDassert( (old_size) <= (cache_ptr)->slist_size ); \ HDassert( (cache_ptr)->slist_len > 0 ); \ HDassert( ((cache_ptr)->slist_len > 1) || \ ( (cache_ptr)->slist_size == (old_size) ) ); \ HDassert( (entry_ptr)->ring > H5C_RING_UNDEFINED ); \ HDassert( (entry_ptr)->ring < H5C_RING_NTYPES ); \ HDassert( (cache_ptr)->slist_ring_len[(entry_ptr)->ring] <= \ (cache_ptr)->slist_len ); \ HDassert( (cache_ptr)->slist_ring_size[(entry_ptr)->ring] <= \ (cache_ptr)->slist_size ); \ \ (cache_ptr)->slist_size -= (old_size); \ (cache_ptr)->slist_size += (new_size); \ \ HDassert( (cache_ptr)->slist_ring_size[(entry_ptr->ring)] >=(old_size) ); \ ((cache_ptr)->slist_ring_size[(entry_ptr)->ring]) -= (old_size); \ ((cache_ptr)->slist_ring_size[(entry_ptr)->ring]) += (new_size); \ \ HDassert( (new_size) <= (cache_ptr)->slist_size ); \ HDassert( ( (cache_ptr)->slist_len > 1 ) || \ ( (cache_ptr)->slist_size == (new_size) ) ); \ } /* H5C__UPDATE_SLIST_FOR_SIZE_CHANGE */ #endif /* H5C_DO_SANITY_CHECKS */ /************************************************************************** * * Replacement policy update macros: * * These used to be functions, but I converted them to macros to avoid some * function call overhead. * **************************************************************************/ /*------------------------------------------------------------------------- * * Macro: H5C__FAKE_RP_FOR_MOST_RECENT_ACCESS * * Purpose: For efficiency, we sometimes change the order of flushes -- * but doing so can confuse the replacement policy. This * macro exists to allow us to specify an entry as the * most recently touched so we can repair any such * confusion. * * At present, we only support the modified LRU policy, so * this function deals with that case unconditionally. If * we ever support other replacement policies, the macro * should switch on the current policy and act accordingly. * * Return: N/A * * Programmer: John Mainzer, 10/13/05 * * Modifications: * * JRM -- 3/20/06 * Modified macro to ignore pinned entries. Pinned entries * do not appear in the data structures maintained by the * replacement policy code, and thus this macro has nothing * to do if called for such an entry. * * JRM -- 3/28/07 * Added sanity checks using the new is_read_only and * ro_ref_count fields of struct H5C_cache_entry_t. * *------------------------------------------------------------------------- */ #if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS #define H5C__FAKE_RP_FOR_MOST_RECENT_ACCESS(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->size > 0 ); \ \ if ( ! ((entry_ptr)->is_pinned) ) { \ \ /* modified LRU specific code */ \ \ /* remove the entry from the LRU list, and re-insert it at the head.\ */ \ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* Use the dirty flag to infer whether the entry is on the clean or \ * dirty LRU list, and remove it. Then insert it at the head of \ * the same LRU list. \ * \ * At least initially, all entries should be clean. That may \ * change, so we may as well deal with both cases now. \ */ \ \ if ( (entry_ptr)->is_dirty ) { \ H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ (cache_ptr)->dLRU_tail_ptr, \ (cache_ptr)->dLRU_list_len, \ (cache_ptr)->dLRU_list_size, (fail_val)) \ \ H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ (cache_ptr)->dLRU_tail_ptr, \ (cache_ptr)->dLRU_list_len, \ (cache_ptr)->dLRU_list_size, (fail_val)) \ } else { \ H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ (cache_ptr)->cLRU_tail_ptr, \ (cache_ptr)->cLRU_list_len, \ (cache_ptr)->cLRU_list_size, (fail_val)) \ \ H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ (cache_ptr)->cLRU_tail_ptr, \ (cache_ptr)->cLRU_list_len, \ (cache_ptr)->cLRU_list_size, (fail_val)) \ } \ \ /* End modified LRU specific code. */ \ } \ } /* H5C__FAKE_RP_FOR_MOST_RECENT_ACCESS */ #else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ #define H5C__FAKE_RP_FOR_MOST_RECENT_ACCESS(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->size > 0 ); \ \ if ( ! ((entry_ptr)->is_pinned) ) { \ \ /* modified LRU specific code */ \ \ /* remove the entry from the LRU list, and re-insert it at the head \ */ \ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* End modified LRU specific code. */ \ } \ } /* H5C__FAKE_RP_FOR_MOST_RECENT_ACCESS */ #endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ /*------------------------------------------------------------------------- * * Macro: H5C__UPDATE_RP_FOR_EVICTION * * Purpose: Update the replacement policy data structures for an * eviction of the specified cache entry. * * At present, we only support the modified LRU policy, so * this function deals with that case unconditionally. If * we ever support other replacement policies, the function * should switch on the current policy and act accordingly. * * Return: Non-negative on success/Negative on failure. * * Programmer: John Mainzer, 5/10/04 * * Modifications: * * JRM - 7/27/04 * Converted the function H5C_update_rp_for_eviction() to the * macro H5C__UPDATE_RP_FOR_EVICTION in an effort to squeeze * a bit more performance out of the cache. * * At least for the first cut, I am leaving the comments and * white space in the macro. If they cause dificulties with * the pre-processor, I'll have to remove them. * * JRM - 7/28/04 * Split macro into two version, one supporting the clean and * dirty LRU lists, and the other not. Yet another attempt * at optimization. * * JRM - 3/20/06 * Pinned entries can't be evicted, so this entry should never * be called on a pinned entry. Added assert to verify this. * * JRM -- 3/28/07 * Added sanity checks for the new is_read_only and * ro_ref_count fields of struct H5C_cache_entry_t. * *------------------------------------------------------------------------- */ #if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS #define H5C__UPDATE_RP_FOR_EVICTION(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( !((entry_ptr)->is_pinned) ); \ HDassert( (entry_ptr)->size > 0 ); \ \ /* modified LRU specific code */ \ \ /* remove the entry from the LRU list. */ \ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* If the entry is clean when it is evicted, it should be on the \ * clean LRU list, if it was dirty, it should be on the dirty LRU list. \ * Remove it from the appropriate list according to the value of the \ * dirty flag. \ */ \ \ if ( (entry_ptr)->is_dirty ) { \ \ H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ (cache_ptr)->dLRU_tail_ptr, \ (cache_ptr)->dLRU_list_len, \ (cache_ptr)->dLRU_list_size, (fail_val)) \ } else { \ H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ (cache_ptr)->cLRU_tail_ptr, \ (cache_ptr)->cLRU_list_len, \ (cache_ptr)->cLRU_list_size, (fail_val)) \ } \ \ } /* H5C__UPDATE_RP_FOR_EVICTION */ #else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ #define H5C__UPDATE_RP_FOR_EVICTION(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( !((entry_ptr)->is_pinned) ); \ HDassert( (entry_ptr)->size > 0 ); \ \ /* modified LRU specific code */ \ \ /* remove the entry from the LRU list. */ \ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ } /* H5C__UPDATE_RP_FOR_EVICTION */ #endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ /*------------------------------------------------------------------------- * * Macro: H5C__UPDATE_RP_FOR_FLUSH * * Purpose: Update the replacement policy data structures for a flush * of the specified cache entry. * * At present, we only support the modified LRU policy, so * this function deals with that case unconditionally. If * we ever support other replacement policies, the function * should switch on the current policy and act accordingly. * * Return: N/A * * Programmer: John Mainzer, 5/6/04 * * Modifications: * * JRM - 7/27/04 * Converted the function H5C_update_rp_for_flush() to the * macro H5C__UPDATE_RP_FOR_FLUSH in an effort to squeeze * a bit more performance out of the cache. * * At least for the first cut, I am leaving the comments and * white space in the macro. If they cause dificulties with * pre-processor, I'll have to remove them. * * JRM - 7/28/04 * Split macro into two versions, one supporting the clean and * dirty LRU lists, and the other not. Yet another attempt * at optimization. * * JRM - 3/20/06 * While pinned entries can be flushed, they don't reside in * the replacement policy data structures when unprotected. * Thus I modified this macro to do nothing if the entry is * pinned. * * JRM - 3/28/07 * Added sanity checks based on the new is_read_only and * ro_ref_count fields of struct H5C_cache_entry_t. * *------------------------------------------------------------------------- */ #if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS #define H5C__UPDATE_RP_FOR_FLUSH(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->size > 0 ); \ \ if ( ! ((entry_ptr)->is_pinned) ) { \ \ /* modified LRU specific code */ \ \ /* remove the entry from the LRU list, and re-insert it at the \ * head. \ */ \ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* since the entry is being flushed or cleared, one would think \ * that it must be dirty -- but that need not be the case. Use the \ * dirty flag to infer whether the entry is on the clean or dirty \ * LRU list, and remove it. Then insert it at the head of the \ * clean LRU list. \ * \ * The function presumes that a dirty entry will be either cleared \ * or flushed shortly, so it is OK if we put a dirty entry on the \ * clean LRU list. \ */ \ \ if ( (entry_ptr)->is_dirty ) { \ H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ (cache_ptr)->dLRU_tail_ptr, \ (cache_ptr)->dLRU_list_len, \ (cache_ptr)->dLRU_list_size, (fail_val)) \ } else { \ H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ (cache_ptr)->cLRU_tail_ptr, \ (cache_ptr)->cLRU_list_len, \ (cache_ptr)->cLRU_list_size, (fail_val)) \ } \ \ H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ (cache_ptr)->cLRU_tail_ptr, \ (cache_ptr)->cLRU_list_len, \ (cache_ptr)->cLRU_list_size, (fail_val)) \ \ /* End modified LRU specific code. */ \ } \ } /* H5C__UPDATE_RP_FOR_FLUSH */ #else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ #define H5C__UPDATE_RP_FOR_FLUSH(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->size > 0 ); \ \ if ( ! ((entry_ptr)->is_pinned) ) { \ \ /* modified LRU specific code */ \ \ /* remove the entry from the LRU list, and re-insert it at the \ * head. \ */ \ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* End modified LRU specific code. */ \ } \ } /* H5C__UPDATE_RP_FOR_FLUSH */ #endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ /*------------------------------------------------------------------------- * * Macro: H5C__UPDATE_RP_FOR_INSERT_APPEND * * Purpose: Update the replacement policy data structures for an * insertion of the specified cache entry. * * Unlike H5C__UPDATE_RP_FOR_INSERTION below, mark the * new entry as the LEAST recently used entry, not the * most recently used. * * For now at least, this macro should only be used in * the reconstruction of the metadata cache from a cache * image block. * * At present, we only support the modified LRU policy, so * this function deals with that case unconditionally. If * we ever support other replacement policies, the function * should switch on the current policy and act accordingly. * * Return: N/A * * Programmer: John Mainzer, 8/15/15 * *------------------------------------------------------------------------- */ #if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS #define H5C__UPDATE_RP_FOR_INSERT_APPEND(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->size > 0 ); \ \ if ( (entry_ptr)->is_pinned ) { \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->pel_head_ptr, \ (cache_ptr)->pel_tail_ptr, \ (cache_ptr)->pel_len, \ (cache_ptr)->pel_size, (fail_val)) \ \ } else { \ \ /* modified LRU specific code */ \ \ /* insert the entry at the tail of the LRU list. */ \ \ H5C__DLL_APPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* insert the entry at the tail of the clean or dirty LRU list as \ * appropriate. \ */ \ \ if ( entry_ptr->is_dirty ) { \ H5C__AUX_DLL_APPEND((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ (cache_ptr)->dLRU_tail_ptr, \ (cache_ptr)->dLRU_list_len, \ (cache_ptr)->dLRU_list_size, (fail_val)) \ } else { \ H5C__AUX_DLL_APPEND((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ (cache_ptr)->cLRU_tail_ptr, \ (cache_ptr)->cLRU_list_len, \ (cache_ptr)->cLRU_list_size, (fail_val)) \ } \ \ /* End modified LRU specific code. */ \ } \ } #else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ #define H5C__UPDATE_RP_FOR_INSERT_APPEND(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->size > 0 ); \ \ if ( (entry_ptr)->is_pinned ) { \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->pel_head_ptr, \ (cache_ptr)->pel_tail_ptr, \ (cache_ptr)->pel_len, \ (cache_ptr)->pel_size, (fail_val)) \ \ } else { \ \ /* modified LRU specific code */ \ \ /* insert the entry at the tail of the LRU list. */ \ \ H5C__DLL_APPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* End modified LRU specific code. */ \ } \ } #endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ /*------------------------------------------------------------------------- * * Macro: H5C__UPDATE_RP_FOR_INSERTION * * Purpose: Update the replacement policy data structures for an * insertion of the specified cache entry. * * At present, we only support the modified LRU policy, so * this function deals with that case unconditionally. If * we ever support other replacement policies, the function * should switch on the current policy and act accordingly. * * Return: N/A * * Programmer: John Mainzer, 5/17/04 * * Modifications: * * JRM - 7/27/04 * Converted the function H5C_update_rp_for_insertion() to the * macro H5C__UPDATE_RP_FOR_INSERTION in an effort to squeeze * a bit more performance out of the cache. * * At least for the first cut, I am leaving the comments and * white space in the macro. If they cause dificulties with * pre-processor, I'll have to remove them. * * JRM - 7/28/04 * Split macro into two version, one supporting the clean and * dirty LRU lists, and the other not. Yet another attempt * at optimization. * * JRM - 3/10/06 * This macro should never be called on a pinned entry. * Inserted an assert to verify this. * * JRM - 8/9/06 * Not any more. We must now allow insertion of pinned * entries. Updated macro to support this. * * JRM - 3/28/07 * Added sanity checks using the new is_read_only and * ro_ref_count fields of struct H5C_cache_entry_t. * *------------------------------------------------------------------------- */ #if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS #define H5C__UPDATE_RP_FOR_INSERTION(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->size > 0 ); \ \ if ( (entry_ptr)->is_pinned ) { \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->pel_head_ptr, \ (cache_ptr)->pel_tail_ptr, \ (cache_ptr)->pel_len, \ (cache_ptr)->pel_size, (fail_val)) \ \ } else { \ \ /* modified LRU specific code */ \ \ /* insert the entry at the head of the LRU list. */ \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* insert the entry at the head of the clean or dirty LRU list as \ * appropriate. \ */ \ \ if ( entry_ptr->is_dirty ) { \ H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ (cache_ptr)->dLRU_tail_ptr, \ (cache_ptr)->dLRU_list_len, \ (cache_ptr)->dLRU_list_size, (fail_val)) \ } else { \ H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ (cache_ptr)->cLRU_tail_ptr, \ (cache_ptr)->cLRU_list_len, \ (cache_ptr)->cLRU_list_size, (fail_val)) \ } \ \ /* End modified LRU specific code. */ \ } \ } #else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ #define H5C__UPDATE_RP_FOR_INSERTION(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->size > 0 ); \ \ if ( (entry_ptr)->is_pinned ) { \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->pel_head_ptr, \ (cache_ptr)->pel_tail_ptr, \ (cache_ptr)->pel_len, \ (cache_ptr)->pel_size, (fail_val)) \ \ } else { \ \ /* modified LRU specific code */ \ \ /* insert the entry at the head of the LRU list. */ \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* End modified LRU specific code. */ \ } \ } #endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ /*------------------------------------------------------------------------- * * Macro: H5C__UPDATE_RP_FOR_PROTECT * * Purpose: Update the replacement policy data structures for a * protect of the specified cache entry. * * To do this, unlink the specified entry from any data * structures used by the replacement policy, and add the * entry to the protected list. * * At present, we only support the modified LRU policy, so * this function deals with that case unconditionally. If * we ever support other replacement policies, the function * should switch on the current policy and act accordingly. * * Return: N/A * * Programmer: John Mainzer, 5/17/04 * * Modifications: * * JRM - 7/27/04 * Converted the function H5C_update_rp_for_protect() to the * macro H5C__UPDATE_RP_FOR_PROTECT in an effort to squeeze * a bit more performance out of the cache. * * At least for the first cut, I am leaving the comments and * white space in the macro. If they cause dificulties with * pre-processor, I'll have to remove them. * * JRM - 7/28/04 * Split macro into two version, one supporting the clean and * dirty LRU lists, and the other not. Yet another attempt * at optimization. * * JRM - 3/17/06 * Modified macro to attempt to remove pinned entriese from * the pinned entry list instead of from the data structures * maintained by the replacement policy. * * JRM - 3/28/07 * Added sanity checks based on the new is_read_only and * ro_ref_count fields of struct H5C_cache_entry_t. * *------------------------------------------------------------------------- */ #if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS #define H5C__UPDATE_RP_FOR_PROTECT(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->size > 0 ); \ \ if ( (entry_ptr)->is_pinned ) { \ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->pel_head_ptr, \ (cache_ptr)->pel_tail_ptr, \ (cache_ptr)->pel_len, \ (cache_ptr)->pel_size, (fail_val)) \ \ } else { \ \ /* modified LRU specific code */ \ \ /* remove the entry from the LRU list. */ \ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* Similarly, remove the entry from the clean or dirty LRU list \ * as appropriate. \ */ \ \ if ( (entry_ptr)->is_dirty ) { \ \ H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ (cache_ptr)->dLRU_tail_ptr, \ (cache_ptr)->dLRU_list_len, \ (cache_ptr)->dLRU_list_size, (fail_val)) \ \ } else { \ \ H5C__AUX_DLL_REMOVE((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ (cache_ptr)->cLRU_tail_ptr, \ (cache_ptr)->cLRU_list_len, \ (cache_ptr)->cLRU_list_size, (fail_val)) \ } \ \ /* End modified LRU specific code. */ \ } \ \ /* Regardless of the replacement policy, or whether the entry is \ * pinned, now add the entry to the protected list. \ */ \ \ H5C__DLL_APPEND((entry_ptr), (cache_ptr)->pl_head_ptr, \ (cache_ptr)->pl_tail_ptr, \ (cache_ptr)->pl_len, \ (cache_ptr)->pl_size, (fail_val)) \ } /* H5C__UPDATE_RP_FOR_PROTECT */ #else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ #define H5C__UPDATE_RP_FOR_PROTECT(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->size > 0 ); \ \ if ( (entry_ptr)->is_pinned ) { \ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->pel_head_ptr, \ (cache_ptr)->pel_tail_ptr, \ (cache_ptr)->pel_len, \ (cache_ptr)->pel_size, (fail_val)) \ \ } else { \ \ /* modified LRU specific code */ \ \ /* remove the entry from the LRU list. */ \ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* End modified LRU specific code. */ \ } \ \ /* Regardless of the replacement policy, or whether the entry is \ * pinned, now add the entry to the protected list. \ */ \ \ H5C__DLL_APPEND((entry_ptr), (cache_ptr)->pl_head_ptr, \ (cache_ptr)->pl_tail_ptr, \ (cache_ptr)->pl_len, \ (cache_ptr)->pl_size, (fail_val)) \ } /* H5C__UPDATE_RP_FOR_PROTECT */ #endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ /*------------------------------------------------------------------------- * * Macro: H5C__UPDATE_RP_FOR_MOVE * * Purpose: Update the replacement policy data structures for a * move of the specified cache entry. * * At present, we only support the modified LRU policy, so * this function deals with that case unconditionally. If * we ever support other replacement policies, the function * should switch on the current policy and act accordingly. * * Return: N/A * * Programmer: John Mainzer, 5/17/04 * *------------------------------------------------------------------------- */ #if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS #define H5C__UPDATE_RP_FOR_MOVE(cache_ptr, entry_ptr, was_dirty, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->size > 0 ); \ \ if ( ! ( (entry_ptr)->is_pinned ) && ! ( (entry_ptr->is_protected ) ) ) { \ \ /* modified LRU specific code */ \ \ /* remove the entry from the LRU list, and re-insert it at the head. \ */ \ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* remove the entry from either the clean or dirty LUR list as \ * indicated by the was_dirty parameter \ */ \ if ( was_dirty ) { \ \ H5C__AUX_DLL_REMOVE((entry_ptr), \ (cache_ptr)->dLRU_head_ptr, \ (cache_ptr)->dLRU_tail_ptr, \ (cache_ptr)->dLRU_list_len, \ (cache_ptr)->dLRU_list_size, \ (fail_val)) \ \ } else { \ \ H5C__AUX_DLL_REMOVE((entry_ptr), \ (cache_ptr)->cLRU_head_ptr, \ (cache_ptr)->cLRU_tail_ptr, \ (cache_ptr)->cLRU_list_len, \ (cache_ptr)->cLRU_list_size, \ (fail_val)) \ } \ \ /* insert the entry at the head of either the clean or dirty \ * LRU list as appropriate. \ */ \ \ if ( (entry_ptr)->is_dirty ) { \ \ H5C__AUX_DLL_PREPEND((entry_ptr), \ (cache_ptr)->dLRU_head_ptr, \ (cache_ptr)->dLRU_tail_ptr, \ (cache_ptr)->dLRU_list_len, \ (cache_ptr)->dLRU_list_size, \ (fail_val)) \ \ } else { \ \ H5C__AUX_DLL_PREPEND((entry_ptr), \ (cache_ptr)->cLRU_head_ptr, \ (cache_ptr)->cLRU_tail_ptr, \ (cache_ptr)->cLRU_list_len, \ (cache_ptr)->cLRU_list_size, \ (fail_val)) \ } \ \ /* End modified LRU specific code. */ \ } \ } /* H5C__UPDATE_RP_FOR_MOVE */ #else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ #define H5C__UPDATE_RP_FOR_MOVE(cache_ptr, entry_ptr, was_dirty, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->size > 0 ); \ \ if ( ! ( (entry_ptr)->is_pinned ) && ! ( (entry_ptr->is_protected ) ) ) { \ \ /* modified LRU specific code */ \ \ /* remove the entry from the LRU list, and re-insert it at the head. \ */ \ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* End modified LRU specific code. */ \ } \ } /* H5C__UPDATE_RP_FOR_MOVE */ #endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ /*------------------------------------------------------------------------- * * Macro: H5C__UPDATE_RP_FOR_SIZE_CHANGE * * Purpose: Update the replacement policy data structures for a * size change of the specified cache entry. * * To do this, determine if the entry is pinned. If it is, * update the size of the pinned entry list. * * If it isn't pinned, the entry must handled by the * replacement policy. Update the appropriate replacement * policy data structures. * * At present, we only support the modified LRU policy, so * this function deals with that case unconditionally. If * we ever support other replacement policies, the function * should switch on the current policy and act accordingly. * * Return: N/A * * Programmer: John Mainzer, 8/23/06 * * Modifications: * * JRM -- 3/28/07 * Added sanity checks based on the new is_read_only and * ro_ref_count fields of struct H5C_cache_entry_t. * *------------------------------------------------------------------------- */ #if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS #define H5C__UPDATE_RP_FOR_SIZE_CHANGE(cache_ptr, entry_ptr, new_size) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->size > 0 ); \ HDassert( new_size > 0 ); \ \ if ( (entry_ptr)->coll_access ) { \ \ H5C__DLL_UPDATE_FOR_SIZE_CHANGE((cache_ptr)->coll_list_len, \ (cache_ptr)->coll_list_size, \ (entry_ptr)->size, \ (new_size)); \ \ } \ \ if ( (entry_ptr)->is_pinned ) { \ \ H5C__DLL_UPDATE_FOR_SIZE_CHANGE((cache_ptr)->pel_len, \ (cache_ptr)->pel_size, \ (entry_ptr)->size, \ (new_size)); \ \ } else { \ \ /* modified LRU specific code */ \ \ /* Update the size of the LRU list */ \ \ H5C__DLL_UPDATE_FOR_SIZE_CHANGE((cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, \ (entry_ptr)->size, \ (new_size)); \ \ /* Similarly, update the size of the clean or dirty LRU list as \ * appropriate. At present, the entry must be clean, but that \ * could change. \ */ \ \ if ( (entry_ptr)->is_dirty ) { \ \ H5C__DLL_UPDATE_FOR_SIZE_CHANGE((cache_ptr)->dLRU_list_len, \ (cache_ptr)->dLRU_list_size, \ (entry_ptr)->size, \ (new_size)); \ \ } else { \ \ H5C__DLL_UPDATE_FOR_SIZE_CHANGE((cache_ptr)->cLRU_list_len, \ (cache_ptr)->cLRU_list_size, \ (entry_ptr)->size, \ (new_size)); \ } \ \ /* End modified LRU specific code. */ \ } \ \ } /* H5C__UPDATE_RP_FOR_SIZE_CHANGE */ #else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ #define H5C__UPDATE_RP_FOR_SIZE_CHANGE(cache_ptr, entry_ptr, new_size) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->size > 0 ); \ HDassert( new_size > 0 ); \ \ if ( (entry_ptr)->is_pinned ) { \ \ H5C__DLL_UPDATE_FOR_SIZE_CHANGE((cache_ptr)->pel_len, \ (cache_ptr)->pel_size, \ (entry_ptr)->size, \ (new_size)); \ \ } else { \ \ /* modified LRU specific code */ \ \ /* Update the size of the LRU list */ \ \ H5C__DLL_UPDATE_FOR_SIZE_CHANGE((cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, \ (entry_ptr)->size, \ (new_size)); \ \ /* End modified LRU specific code. */ \ } \ \ } /* H5C__UPDATE_RP_FOR_SIZE_CHANGE */ #endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ /*------------------------------------------------------------------------- * * Macro: H5C__UPDATE_RP_FOR_UNPIN * * Purpose: Update the replacement policy data structures for an * unpin of the specified cache entry. * * To do this, unlink the specified entry from the protected * entry list, and re-insert it in the data structures used * by the current replacement policy. * * At present, we only support the modified LRU policy, so * this function deals with that case unconditionally. If * we ever support other replacement policies, the macro * should switch on the current policy and act accordingly. * * Return: N/A * * Programmer: John Mainzer, 3/22/06 * * Modifications: * * JRM -- 3/28/07 * Added sanity checks based on the new is_read_only and * ro_ref_count fields of struct H5C_cache_entry_t. * *------------------------------------------------------------------------- */ #if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS #define H5C__UPDATE_RP_FOR_UNPIN(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->is_pinned); \ HDassert( (entry_ptr)->size > 0 ); \ \ /* Regardless of the replacement policy, remove the entry from the \ * pinned entry list. \ */ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->pel_head_ptr, \ (cache_ptr)->pel_tail_ptr, (cache_ptr)->pel_len, \ (cache_ptr)->pel_size, (fail_val)) \ \ /* modified LRU specific code */ \ \ /* insert the entry at the head of the LRU list. */ \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* Similarly, insert the entry at the head of either the clean \ * or dirty LRU list as appropriate. \ */ \ \ if ( (entry_ptr)->is_dirty ) { \ \ H5C__AUX_DLL_PREPEND((entry_ptr), \ (cache_ptr)->dLRU_head_ptr, \ (cache_ptr)->dLRU_tail_ptr, \ (cache_ptr)->dLRU_list_len, \ (cache_ptr)->dLRU_list_size, \ (fail_val)) \ \ } else { \ \ H5C__AUX_DLL_PREPEND((entry_ptr), \ (cache_ptr)->cLRU_head_ptr, \ (cache_ptr)->cLRU_tail_ptr, \ (cache_ptr)->cLRU_list_len, \ (cache_ptr)->cLRU_list_size, \ (fail_val)) \ } \ \ /* End modified LRU specific code. */ \ \ } /* H5C__UPDATE_RP_FOR_UNPIN */ #else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ #define H5C__UPDATE_RP_FOR_UNPIN(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( !((entry_ptr)->is_protected) ); \ HDassert( !((entry_ptr)->is_read_only) ); \ HDassert( ((entry_ptr)->ro_ref_count) == 0 ); \ HDassert( (entry_ptr)->is_pinned); \ HDassert( (entry_ptr)->size > 0 ); \ \ /* Regardless of the replacement policy, remove the entry from the \ * pinned entry list. \ */ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->pel_head_ptr, \ (cache_ptr)->pel_tail_ptr, (cache_ptr)->pel_len, \ (cache_ptr)->pel_size, (fail_val)) \ \ /* modified LRU specific code */ \ \ /* insert the entry at the head of the LRU list. */ \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* End modified LRU specific code. */ \ \ } /* H5C__UPDATE_RP_FOR_UNPIN */ #endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ /*------------------------------------------------------------------------- * * Macro: H5C__UPDATE_RP_FOR_UNPROTECT * * Purpose: Update the replacement policy data structures for an * unprotect of the specified cache entry. * * To do this, unlink the specified entry from the protected * list, and re-insert it in the data structures used by the * current replacement policy. * * At present, we only support the modified LRU policy, so * this function deals with that case unconditionally. If * we ever support other replacement policies, the function * should switch on the current policy and act accordingly. * * Return: N/A * * Programmer: John Mainzer, 5/19/04 * * Modifications: * * JRM - 7/27/04 * Converted the function H5C_update_rp_for_unprotect() to * the macro H5C__UPDATE_RP_FOR_UNPROTECT in an effort to * squeeze a bit more performance out of the cache. * * At least for the first cut, I am leaving the comments and * white space in the macro. If they cause dificulties with * pre-processor, I'll have to remove them. * * JRM - 7/28/04 * Split macro into two version, one supporting the clean and * dirty LRU lists, and the other not. Yet another attempt * at optimization. * * JRM - 3/17/06 * Modified macro to put pinned entries on the pinned entry * list instead of inserting them in the data structures * maintained by the replacement policy. * *------------------------------------------------------------------------- */ #if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS #define H5C__UPDATE_RP_FOR_UNPROTECT(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( (entry_ptr)->is_protected); \ HDassert( (entry_ptr)->size > 0 ); \ \ /* Regardless of the replacement policy, remove the entry from the \ * protected list. \ */ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->pl_head_ptr, \ (cache_ptr)->pl_tail_ptr, (cache_ptr)->pl_len, \ (cache_ptr)->pl_size, (fail_val)) \ \ if ( (entry_ptr)->is_pinned ) { \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->pel_head_ptr, \ (cache_ptr)->pel_tail_ptr, \ (cache_ptr)->pel_len, \ (cache_ptr)->pel_size, (fail_val)) \ \ } else { \ \ /* modified LRU specific code */ \ \ /* insert the entry at the head of the LRU list. */ \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* Similarly, insert the entry at the head of either the clean or \ * dirty LRU list as appropriate. \ */ \ \ if ( (entry_ptr)->is_dirty ) { \ \ H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->dLRU_head_ptr, \ (cache_ptr)->dLRU_tail_ptr, \ (cache_ptr)->dLRU_list_len, \ (cache_ptr)->dLRU_list_size, (fail_val)) \ \ } else { \ \ H5C__AUX_DLL_PREPEND((entry_ptr), (cache_ptr)->cLRU_head_ptr, \ (cache_ptr)->cLRU_tail_ptr, \ (cache_ptr)->cLRU_list_len, \ (cache_ptr)->cLRU_list_size, (fail_val)) \ } \ \ /* End modified LRU specific code. */ \ } \ \ } /* H5C__UPDATE_RP_FOR_UNPROTECT */ #else /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ #define H5C__UPDATE_RP_FOR_UNPROTECT(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ HDassert( (entry_ptr)->is_protected); \ HDassert( (entry_ptr)->size > 0 ); \ \ /* Regardless of the replacement policy, remove the entry from the \ * protected list. \ */ \ H5C__DLL_REMOVE((entry_ptr), (cache_ptr)->pl_head_ptr, \ (cache_ptr)->pl_tail_ptr, (cache_ptr)->pl_len, \ (cache_ptr)->pl_size, (fail_val)) \ \ if ( (entry_ptr)->is_pinned ) { \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->pel_head_ptr, \ (cache_ptr)->pel_tail_ptr, \ (cache_ptr)->pel_len, \ (cache_ptr)->pel_size, (fail_val)) \ \ } else { \ \ /* modified LRU specific code */ \ \ /* insert the entry at the head of the LRU list. */ \ \ H5C__DLL_PREPEND((entry_ptr), (cache_ptr)->LRU_head_ptr, \ (cache_ptr)->LRU_tail_ptr, \ (cache_ptr)->LRU_list_len, \ (cache_ptr)->LRU_list_size, (fail_val)) \ \ /* End modified LRU specific code. */ \ } \ } /* H5C__UPDATE_RP_FOR_UNPROTECT */ #endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ #ifdef H5_HAVE_PARALLEL #if H5C_DO_SANITY_CHECKS #define H5C__COLL_DLL_PRE_REMOVE_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) \ if ( ( (hd_ptr) == NULL ) || \ ( (tail_ptr) == NULL ) || \ ( (entry_ptr) == NULL ) || \ ( (len) <= 0 ) || \ ( (Size) < (entry_ptr)->size ) || \ ( ( (Size) == (entry_ptr)->size ) && ( ! ( (len) == 1 ) ) ) || \ ( ( (entry_ptr)->coll_prev == NULL ) && ( (hd_ptr) != (entry_ptr) ) ) || \ ( ( (entry_ptr)->coll_next == NULL ) && ( (tail_ptr) != (entry_ptr) ) ) || \ ( ( (len) == 1 ) && \ ( ! ( ( (hd_ptr) == (entry_ptr) ) && ( (tail_ptr) == (entry_ptr) ) && \ ( (entry_ptr)->coll_next == NULL ) && \ ( (entry_ptr)->coll_prev == NULL ) && \ ( (Size) == (entry_ptr)->size ) \ ) \ ) \ ) \ ) { \ HDassert(0 && "coll DLL pre remove SC failed"); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "coll DLL pre remove SC failed") \ } #define H5C__COLL_DLL_SC(head_ptr, tail_ptr, len, Size, fv) \ if ( ( ( ( (head_ptr) == NULL ) || ( (tail_ptr) == NULL ) ) && \ ( (head_ptr) != (tail_ptr) ) \ ) || \ ( (len) < 0 ) || \ ( (Size) < 0 ) || \ ( ( (len) == 1 ) && \ ( ( (head_ptr) != (tail_ptr) ) || ( (Size) <= 0 ) || \ ( (head_ptr) == NULL ) || ( (head_ptr)->size != (Size) ) \ ) \ ) || \ ( ( (len) >= 1 ) && \ ( ( (head_ptr) == NULL ) || ( (head_ptr)->coll_prev != NULL ) || \ ( (tail_ptr) == NULL ) || ( (tail_ptr)->coll_next != NULL ) \ ) \ ) \ ) { \ HDassert(0 && "COLL DLL sanity check failed"); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "COLL DLL sanity check failed") \ } #define H5C__COLL_DLL_PRE_INSERT_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) \ if ( ( (entry_ptr) == NULL ) || \ ( (entry_ptr)->coll_next != NULL ) || \ ( (entry_ptr)->coll_prev != NULL ) || \ ( ( ( (hd_ptr) == NULL ) || ( (tail_ptr) == NULL ) ) && \ ( (hd_ptr) != (tail_ptr) ) \ ) || \ ( (len) < 0 ) || \ ( ( (len) == 1 ) && \ ( ( (hd_ptr) != (tail_ptr) ) || ( (Size) <= 0 ) || \ ( (hd_ptr) == NULL ) || ( (hd_ptr)->size != (Size) ) \ ) \ ) || \ ( ( (len) >= 1 ) && \ ( ( (hd_ptr) == NULL ) || ( (hd_ptr)->coll_prev != NULL ) || \ ( (tail_ptr) == NULL ) || ( (tail_ptr)->coll_next != NULL ) \ ) \ ) \ ) { \ HDassert(0 && "COLL DLL pre insert SC failed"); \ HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, (fv), "COLL DLL pre insert SC failed") \ } #else /* H5C_DO_SANITY_CHECKS */ #define H5C__COLL_DLL_PRE_REMOVE_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) #define H5C__COLL_DLL_SC(head_ptr, tail_ptr, len, Size, fv) #define H5C__COLL_DLL_PRE_INSERT_SC(entry_ptr, hd_ptr, tail_ptr, len, Size, fv) #endif /* H5C_DO_SANITY_CHECKS */ #define H5C__COLL_DLL_APPEND(entry_ptr, head_ptr, tail_ptr, len, Size, fail_val) \ { \ H5C__COLL_DLL_PRE_INSERT_SC(entry_ptr, head_ptr, tail_ptr, len, Size, \ fail_val) \ if ( (head_ptr) == NULL ) \ { \ (head_ptr) = (entry_ptr); \ (tail_ptr) = (entry_ptr); \ } \ else \ { \ (tail_ptr)->coll_next = (entry_ptr); \ (entry_ptr)->coll_prev = (tail_ptr); \ (tail_ptr) = (entry_ptr); \ } \ (len)++; \ (Size) += entry_ptr->size; \ } /* H5C__COLL_DLL_APPEND() */ #define H5C__COLL_DLL_PREPEND(entry_ptr, head_ptr, tail_ptr, len, Size, fv) \ { \ H5C__COLL_DLL_PRE_INSERT_SC(entry_ptr, head_ptr, tail_ptr, len, Size, fv)\ if ( (head_ptr) == NULL ) \ { \ (head_ptr) = (entry_ptr); \ (tail_ptr) = (entry_ptr); \ } \ else \ { \ (head_ptr)->coll_prev = (entry_ptr); \ (entry_ptr)->coll_next = (head_ptr); \ (head_ptr) = (entry_ptr); \ } \ (len)++; \ (Size) += entry_ptr->size; \ } /* H5C__COLL_DLL_PREPEND() */ #define H5C__COLL_DLL_REMOVE(entry_ptr, head_ptr, tail_ptr, len, Size, fv) \ { \ H5C__COLL_DLL_PRE_REMOVE_SC(entry_ptr, head_ptr, tail_ptr, len, Size, fv)\ { \ if ( (head_ptr) == (entry_ptr) ) \ { \ (head_ptr) = (entry_ptr)->coll_next; \ if ( (head_ptr) != NULL ) \ (head_ptr)->coll_prev = NULL; \ } \ else \ { \ (entry_ptr)->coll_prev->coll_next = (entry_ptr)->coll_next; \ } \ if ( (tail_ptr) == (entry_ptr) ) \ { \ (tail_ptr) = (entry_ptr)->coll_prev; \ if ( (tail_ptr) != NULL ) \ (tail_ptr)->coll_next = NULL; \ } \ else \ (entry_ptr)->coll_next->coll_prev = (entry_ptr)->coll_prev; \ entry_ptr->coll_next = NULL; \ entry_ptr->coll_prev = NULL; \ (len)--; \ (Size) -= entry_ptr->size; \ } \ } /* H5C__COLL_DLL_REMOVE() */ /*------------------------------------------------------------------------- * * Macro: H5C__INSERT_IN_COLL_LIST * * Purpose: Insert entry into collective entries list * * Return: N/A * * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ #define H5C__INSERT_IN_COLL_LIST(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ \ /* insert the entry at the head of the list. */ \ \ H5C__COLL_DLL_PREPEND((entry_ptr), (cache_ptr)->coll_head_ptr, \ (cache_ptr)->coll_tail_ptr, \ (cache_ptr)->coll_list_len, \ (cache_ptr)->coll_list_size, \ (fail_val)) \ \ } /* H5C__INSERT_IN_COLL_LIST */ /*------------------------------------------------------------------------- * * Macro: H5C__REMOVE_FROM_COLL_LIST * * Purpose: Remove entry from collective entries list * * Return: N/A * * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ #define H5C__REMOVE_FROM_COLL_LIST(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ \ /* remove the entry from the list. */ \ \ H5C__COLL_DLL_REMOVE((entry_ptr), (cache_ptr)->coll_head_ptr, \ (cache_ptr)->coll_tail_ptr, \ (cache_ptr)->coll_list_len, \ (cache_ptr)->coll_list_size, \ (fail_val)) \ \ } /* H5C__REMOVE_FROM_COLL_LIST */ /*------------------------------------------------------------------------- * * Macro: H5C__MOVE_TO_TOP_IN_COLL_LIST * * Purpose: Update entry position in collective entries list * * Return: N/A * * Programmer: Mohamad Chaarawi * *------------------------------------------------------------------------- */ #define H5C__MOVE_TO_TOP_IN_COLL_LIST(cache_ptr, entry_ptr, fail_val) \ { \ HDassert( (cache_ptr) ); \ HDassert( (cache_ptr)->magic == H5C__H5C_T_MAGIC ); \ HDassert( (entry_ptr) ); \ \ /* Remove entry and insert at the head of the list. */ \ H5C__COLL_DLL_REMOVE((entry_ptr), (cache_ptr)->coll_head_ptr, \ (cache_ptr)->coll_tail_ptr, \ (cache_ptr)->coll_list_len, \ (cache_ptr)->coll_list_size, \ (fail_val)) \ \ H5C__COLL_DLL_PREPEND((entry_ptr), (cache_ptr)->coll_head_ptr, \ (cache_ptr)->coll_tail_ptr, \ (cache_ptr)->coll_list_len, \ (cache_ptr)->coll_list_size, \ (fail_val)) \ \ } /* H5C__MOVE_TO_TOP_IN_COLL_LIST */ #endif /* H5_HAVE_PARALLEL */ /****************************/ /* Package Private Typedefs */ /****************************/ /**************************************************************************** * * structure H5C_tag_info_t * * Structure about each set of tagged entries for an object in the file. * * Each H5C_tag_info_t struct corresponds to a particular object in the file. * * Each H5C_cache_entry struct in the linked list of entries for this tag * also contains a pointer back to the H5C_tag_info_t struct for the * overall object. * * * The fields of this structure are discussed individually below: * * tag: Address (i.e. "tag") of the object header for all the entries * corresponding to parts of that object. * * head: Head of doubly-linked list of all entries belonging to the tag. * * entry_cnt: Number of entries on linked list of entries for this tag. * * corked: Boolean flag indicating whether entries for this object can be * evicted. * ****************************************************************************/ typedef struct H5C_tag_info_t { haddr_t tag; /* Tag (address) of the entries (must be first, for skiplist) */ H5C_cache_entry_t *head; /* Head of the list of entries for this tag */ size_t entry_cnt; /* Number of entries on list */ hbool_t corked; /* Whether this object is corked */ } H5C_tag_info_t; /**************************************************************************** * * structure H5C_t * * Catchall structure for all variables specific to an instance of the cache. * * While the individual fields of the structure are discussed below, the * following overview may be helpful. * * Entries in the cache are stored in an instance of H5TB_TREE, indexed on * the entry's disk address. While the H5TB_TREE is less efficient than * hash table, it keeps the entries in address sorted order. As flushes * in parallel mode are more efficient if they are issued in increasing * address order, this is a significant benefit. Also the H5TB_TREE code * was readily available, which reduced development time. * * While the cache was designed with multiple replacement policies in mind, * at present only a modified form of LRU is supported. * * JRM - 4/26/04 * * Profiling has indicated that searches in the instance of H5TB_TREE are * too expensive. To deal with this issue, I have augmented the cache * with a hash table in which all entries will be stored. Given the * advantages of flushing entries in increasing address order, the TBBT * is retained, but only dirty entries are stored in it. At least for * now, we will leave entries in the TBBT after they are flushed. * * Note that index_size and index_len now refer to the total size of * and number of entries in the hash table. * * JRM - 7/19/04 * * The TBBT has since been replaced with a skip list. This change * greatly predates this note. * * JRM - 9/26/05 * * magic: Unsigned 32 bit integer always set to H5C__H5C_T_MAGIC. * This field is used to validate pointers to instances of * H5C_t. * * flush_in_progress: Boolean flag indicating whether a flush is in * progress. * * trace_file_ptr: File pointer pointing to the trace file, which is used * to record cache operations for use in simulations and design * studies. This field will usually be NULL, indicating that * no trace file should be recorded. * * Since much of the code supporting the parallel metadata * cache is in H5AC, we don't write the trace file from * H5C. Instead, H5AC reads the trace_file_ptr as needed. * * When we get to using H5C in other places, we may add * code to write trace file data at the H5C level as well. * * logging_enabled: Boolean flag indicating whether cache logging * which is used to record cache operations for use in * debugging and performance analysis. When this flag is set * to TRUE, it means that the log file is open and ready to * receive log entries. It does NOT mean that cache operations * are currently being recorded. That is controlled by the * currently_logging flag (below). * * Since much of the code supporting the parallel metadata * cache is in H5AC, we don't write the trace file from * H5C. Instead, H5AC reads the trace_file_ptr as needed. * * When we get to using H5C in other places, we may add * code to write trace file data at the H5C level as well. * * currently_logging: Boolean flag that indicates if cache operations are * currently being logged. This flag is flipped by the * H5Fstart/stop_mdc_logging functions. * * log_file_ptr: File pointer pointing to the log file. The I/O functions * in stdio.h are used to write to the log file regardless of * the VFD selected. * * aux_ptr: Pointer to void used to allow wrapper code to associate * its data with an instance of H5C_t. The H5C cache code * sets this field to NULL, and otherwise leaves it alone. * * max_type_id: Integer field containing the maximum type id number assigned * to a type of entry in the cache. All type ids from 0 to * max_type_id inclusive must be defined. The names of the * types are stored in the type_name_table discussed below, and * indexed by the ids. * * class_table_ptr: Pointer to an array of H5C_class_t of length * max_type_id + 1. Entry classes for the cache. * * max_cache_size: Nominal maximum number of bytes that may be stored in the * cache. This value should be viewed as a soft limit, as the * cache can exceed this value under the following circumstances: * * a) All entries in the cache are protected, and the cache is * asked to insert a new entry. In this case the new entry * will be created. If this causes the cache to exceed * max_cache_size, it will do so. The cache will attempt * to reduce its size as entries are unprotected. * * b) When running in parallel mode, the cache may not be * permitted to flush a dirty entry in response to a read. * If there are no clean entries available to evict, the * cache will exceed its maximum size. Again the cache * will attempt to reduce its size to the max_cache_size * limit on the next cache write. * * c) When an entry increases in size, the cache may exceed * the max_cache_size limit until the next time the cache * attempts to load or insert an entry. * * d) When the evictions_enabled field is false (see below), * the cache size will increase without limit until the * field is set to true. * * min_clean_size: Nominal minimum number of clean bytes in the cache. * The cache attempts to maintain this number of bytes of * clean data so as to avoid case b) above. Again, this is * a soft limit. * * close_warning_received: Boolean flag indicating that a file closing * warning has been received. * * * In addition to the call back functions required for each entry, the * cache requires the following call back functions for this instance of * the cache as a whole: * * check_write_permitted: In certain applications, the cache may not * be allowed to write to disk at certain time. If specified, * the check_write_permitted function is used to determine if * a write is permissible at any given point in time. * * If no such function is specified (i.e. this field is NULL), * the cache uses the following write_permitted field to * determine whether writes are permitted. * * write_permitted: If check_write_permitted is NULL, this boolean flag * indicates whether writes are permitted. * * log_flush: If provided, this function is called whenever a dirty * entry is flushed to disk. * * * In cases where memory is plentiful, and performance is an issue, it may * be useful to disable all cache evictions, and thereby postpone metadata * writes. The following field is used to implement this. * * evictions_enabled: Boolean flag that is initialized to TRUE. When * this flag is set to FALSE, the metadata cache will not * attempt to evict entries to make space for newly protected * entries, and instead the will grow without limit. * * Needless to say, this feature must be used with care. * * * The cache requires an index to facilitate searching for entries. The * following fields support that index. * * Addendum: JRM -- 10/14/15 * * We sometimes need to visit all entries in the cache. In the past, this * was done by scanning the hash table. However, this is expensive, and * we have come to scan the hash table often enough that it has become a * performance issue. To repair this, I have added code to maintain a * list of all entries in the index -- call this list the index list. * * The index list is maintained by the same macros that maintain the * index, and must have the same length and size as the index proper. * * index_len: Number of entries currently in the hash table used to index * the cache. * * index_size: Number of bytes of cache entries currently stored in the * hash table used to index the cache. * * This value should not be mistaken for footprint of the * cache in memory. The average cache entry is small, and * the cache has a considerable overhead. Multiplying the * index_size by three should yield a conservative estimate * of the cache's memory footprint. * * index_ring_len: Array of integer of length H5C_RING_NTYPES used to * maintain a count of entries in the index by ring. Note * that the sum of all the cells in this array must equal * the value stored in index_len above. * * index_ring_size: Array of size_t of length H5C_RING_NTYPES used to * maintain the sum of the sizes of all entries in the index * by ring. Note that the sum of all cells in this array must * equal the value stored in index_size above. * * clean_index_size: Number of bytes of clean entries currently stored in * the hash table. Note that the index_size field (above) * is also the sum of the sizes of all entries in the cache. * Thus we should have the invariant that clean_index_size + * dirty_index_size == index_size. * * WARNING: * * The value of the clean_index_size must not be mistaken * for the current clean size of the cache. Rather, the * clean size of the cache is the current value of * clean_index_size plus the amount of empty space (if any) * in the cache. * * clean_index_ring_size: Array of size_t of length H5C_RING_NTYPES used to * maintain the sum of the sizes of all clean entries in the * index by ring. Note that the sum of all cells in this array * must equal the value stored in clean_index_size above. * * dirty_index_size: Number of bytes of dirty entries currently stored in * the hash table. Note that the index_size field (above) * is also the sum of the sizes of all entries in the cache. * Thus we should have the invariant that clean_index_size + * dirty_index_size == index_size. * * dirty_index_ring_size: Array of size_t of length H5C_RING_NTYPES used to * maintain the sum of the sizes of all dirty entries in the * index by ring. Note that the sum of all cells in this array * must equal the value stored in dirty_index_size above. * * index: Array of pointer to H5C_cache_entry_t of size * H5C__HASH_TABLE_LEN. At present, this value is a power * of two, not the usual prime number. * * I hope that the variable size of cache elements, the large * hash table size, and the way in which HDF5 allocates space * will combine to avoid problems with periodicity. If so, we * can use a trivial hash function (a bit-and and a 3 bit left * shift) with some small savings. * * If not, it will become evident in the statistics. Changing * to the usual prime number length hash table will require * changing the H5C__HASH_FCN macro and the deletion of the * H5C__HASH_MASK #define. No other changes should be required. * * il_len: Number of entries on the index list. * * This must always be equal to index_len. As such, this * field is redundant. However, the existing linked list * management macros expect to maintain a length field, so * this field exists primarily to avoid adding complexity to * these macros. * * il_size: Number of bytes of cache entries currently stored in the * index list. * * This must always be equal to index_size. As such, this * field is redundant. However, the existing linked list * management macros expect to maintain a size field, so * this field exists primarily to avoid adding complexity to * these macros. * * il_head: Pointer to the head of the doubly linked list of entries in * the index list. Note that cache entries on this list are * linked by their il_next and il_prev fields. * * This field is NULL if the index is empty. * * il_tail: Pointer to the tail of the doubly linked list of entries in * the index list. Note that cache entries on this list are * linked by their il_next and il_prev fields. * * This field is NULL if the index is empty. * * * With the addition of the take ownership flag, it is possible that * an entry may be removed from the cache as the result of the flush of * a second entry. In general, this causes little trouble, but it is * possible that the entry removed may be the next entry in the scan of * a list. In this case, we must be able to detect the fact that the * entry has been removed, so that the scan doesn't attempt to proceed with * an entry that is no longer in the cache. * * The following fields are maintained to facilitate this. * * entries_removed_counter: Counter that is incremented each time an * entry is removed from the cache by any means (eviction, * expungement, or take ownership at this point in time). * Functions that perform scans on lists may set this field * to zero prior to calling H5C__flush_single_entry(). * Unexpected changes to the counter indicate that an entry * was removed from the cache as a side effect of the flush. * * last_entry_removed_ptr: Pointer to the instance of H5C_cache_entry_t * which contained the last entry to be removed from the cache, * or NULL if there either is no such entry, or if a function * performing a scan of a list has set this field to NULL prior * to calling H5C__flush_single_entry(). * * WARNING!!! This field must NEVER be dereferenced. It is * maintained to allow functions that perform scans of lists * to compare this pointer with their pointers to next, thus * allowing them to avoid unnecessary restarts of scans if the * pointers don't match, and if entries_removed_counter is * one. * * entry_watched_for_removal: Pointer to an instance of H5C_cache_entry_t * which contains the 'next' entry for an iteration. Removing * this entry must trigger a rescan of the iteration, so each * entry removed from the cache is compared against this pointer * and the pointer is reset to NULL if the watched entry is removed. * (This functions similarly to a "dead man's switch") * * * When we flush the cache, we need to write entries out in increasing * address order. An instance of a skip list is used to store dirty entries in * sorted order. Whether it is cheaper to sort the dirty entries as needed, * or to maintain the list is an open question. At a guess, it depends * on how frequently the cache is flushed. We will see how it goes. * * For now at least, I will not remove dirty entries from the list as they * are flushed. (this has been changed -- dirty entries are now removed from * the skip list as they are flushed. JRM - 10/25/05) * * slist_changed: Boolean flag used to indicate whether the contents of * the slist has changed since the last time this flag was * reset. This is used in the cache flush code to detect * conditions in which pre-serialize or serialize callbacks * have modified the slist -- which obliges us to restart * the scan of the slist from the beginning. * * slist_len: Number of entries currently in the skip list * used to maintain a sorted list of dirty entries in the * cache. * * slist_size: Number of bytes of cache entries currently stored in the * skip list used to maintain a sorted list of * dirty entries in the cache. * * slist_ring_len: Array of integer of length H5C_RING_NTYPES used to * maintain a count of entries in the slist by ring. Note * that the sum of all the cells in this array must equal * the value stored in slist_len above. * * slist_ring_size: Array of size_t of length H5C_RING_NTYPES used to * maintain the sum of the sizes of all entries in the * slist by ring. Note that the sum of all cells in this * array must equal the value stored in slist_size above. * * slist_ptr: pointer to the instance of H5SL_t used maintain a sorted * list of dirty entries in the cache. This sorted list has * two uses: * * a) It allows us to flush dirty entries in increasing address * order, which results in significant savings. * * b) It facilitates checking for adjacent dirty entries when * attempting to evict entries from the cache. While we * don't use this at present, I hope that this will allow * some optimizations when I get to it. * * num_last_entries: The number of entries in the cache that can only be * flushed after all other entries in the cache have * been flushed. At this time, this will only ever be * one entry (the superblock), and the code has been * protected with HDasserts to enforce this. This restraint * can certainly be relaxed in the future if the need for * multiple entries being flushed last arises, though * explicit tests for that case should be added when said * HDasserts are removed. * * Update: There are now two possible last entries * (superblock and file driver info message). This * number will probably increase as we add superblock * messages. JRM -- 11/18/14 * * With the addition of the fractal heap, the cache must now deal with * the case in which entries may be dirtied, moved, or have their sizes * changed during a flush. To allow sanity checks in this situation, the * following two fields have been added. They are only compiled in when * H5C_DO_SANITY_CHECKS is TRUE. * * slist_len_increase: Number of entries that have been added to the * slist since the last time this field was set to zero. * Note that this value can be negative. * * slist_size_increase: Total size of all entries that have been added * to the slist since the last time this field was set to * zero. Note that this value can be negative. * * Cache entries belonging to a particular object are "tagged" with that * object's base object header address. * * The following fields are maintained to facilitate this. * * tag_list: A skip list to track entries that belong to an object. * Each H5C_tag_info_t struct on the tag list corresponds to * a particular object in the file. Tagged entries can be * flushed or evicted as a group, or corked to prevent entries * from being evicted from the cache. * * "Global" entries, like the superblock and the file's * freelist, as well as shared entries like global * heaps and shared object header messages, are not tagged. * * ignore_tags: Boolean flag to disable tag validation during entry insertion. * * When a cache entry is protected, it must be removed from the LRU * list(s) as it cannot be either flushed or evicted until it is unprotected. * The following fields are used to implement the protected list (pl). * * pl_len: Number of entries currently residing on the protected list. * * pl_size: Number of bytes of cache entries currently residing on the * protected list. * * pl_head_ptr: Pointer to the head of the doubly linked list of protected * entries. Note that cache entries on this list are linked * by their next and prev fields. * * This field is NULL if the list is empty. * * pl_tail_ptr: Pointer to the tail of the doubly linked list of protected * entries. Note that cache entries on this list are linked * by their next and prev fields. * * This field is NULL if the list is empty. * * * For very frequently used entries, the protect/unprotect overhead can * become burdensome. To avoid this overhead, I have modified the cache * to allow entries to be "pinned". A pinned entry is similar to a * protected entry, in the sense that it cannot be evicted, and that * the entry can be modified at any time. * * Pinning an entry has the following implications: * * 1) A pinned entry cannot be evicted. Thus unprotected * pinned entries reside in the pinned entry list, instead * of the LRU list(s) (or other lists maintained by the current * replacement policy code). * * 2) A pinned entry can be accessed or modified at any time. * This places an additional burden on the associated pre-serialize * and serialize callbacks, which must ensure the the entry is in * a consistant state before creating an image of it. * * 3) A pinned entry can be marked as dirty (and possibly * change size) while it is unprotected. * * 4) The flush-destroy code must allow pinned entries to * be unpinned (and possibly unprotected) during the * flush. * * Since pinned entries cannot be evicted, they must be kept on a pinned * entry list (pel), instead of being entrusted to the replacement policy * code. * * Maintaining the pinned entry list requires the following fields: * * pel_len: Number of entries currently residing on the pinned * entry list. * * pel_size: Number of bytes of cache entries currently residing on * the pinned entry list. * * pel_head_ptr: Pointer to the head of the doubly linked list of pinned * but not protected entries. Note that cache entries on * this list are linked by their next and prev fields. * * This field is NULL if the list is empty. * * pel_tail_ptr: Pointer to the tail of the doubly linked list of pinned * but not protected entries. Note that cache entries on * this list are linked by their next and prev fields. * * This field is NULL if the list is empty. * * * The cache must have a replacement policy, and the fields supporting this * policy must be accessible from this structure. * * While there has been interest in several replacement policies for * this cache, the initial development schedule is tight. Thus I have * elected to support only a modified LRU (least recently used) policy * for the first cut. * * To further simplify matters, I have simply included the fields needed * by the modified LRU in this structure. When and if we add support for * other policies, it will probably be easiest to just add the necessary * fields to this structure as well -- we only create one instance of this * structure per file, so the overhead is not excessive. * * * Fields supporting the modified LRU policy: * * See most any OS text for a discussion of the LRU replacement policy. * * When operating in parallel mode, we must ensure that a read does not * cause a write. If it does, the process will hang, as the write will * be collective and the other processes will not know to participate. * * To deal with this issue, I have modified the usual LRU policy by adding * clean and dirty LRU lists to the usual LRU list. In general, these * lists are only exist in parallel builds. * * The clean LRU list is simply the regular LRU list with all dirty cache * entries removed. * * Similarly, the dirty LRU list is the regular LRU list with all the clean * cache entries removed. * * When reading in parallel mode, we evict from the clean LRU list only. * This implies that we must try to ensure that the clean LRU list is * reasonably well stocked at all times. * * We attempt to do this by trying to flush enough entries on each write * to keep the cLRU_list_size >= min_clean_size. * * Even if we start with a completely clean cache, a sequence of protects * without unprotects can empty the clean LRU list. In this case, the * cache must grow temporarily. At the next sync point, we will attempt to * evict enough entries to reduce index_size to less than max_cache_size. * While this will usually be possible, all bets are off if enough entries * are protected. * * Discussions of the individual fields used by the modified LRU replacement * policy follow: * * LRU_list_len: Number of cache entries currently on the LRU list. * * Observe that LRU_list_len + pl_len + pel_len must always * equal index_len. * * LRU_list_size: Number of bytes of cache entries currently residing on the * LRU list. * * Observe that LRU_list_size + pl_size + pel_size must always * equal index_size. * * LRU_head_ptr: Pointer to the head of the doubly linked LRU list. Cache * entries on this list are linked by their next and prev fields. * * This field is NULL if the list is empty. * * LRU_tail_ptr: Pointer to the tail of the doubly linked LRU list. Cache * entries on this list are linked by their next and prev fields. * * This field is NULL if the list is empty. * * cLRU_list_len: Number of cache entries currently on the clean LRU list. * * Observe that cLRU_list_len + dLRU_list_len must always * equal LRU_list_len. * * cLRU_list_size: Number of bytes of cache entries currently residing on * the clean LRU list. * * Observe that cLRU_list_size + dLRU_list_size must always * equal LRU_list_size. * * cLRU_head_ptr: Pointer to the head of the doubly linked clean LRU list. * Cache entries on this list are linked by their aux_next and * aux_prev fields. * * This field is NULL if the list is empty. * * cLRU_tail_ptr: Pointer to the tail of the doubly linked clean LRU list. * Cache entries on this list are linked by their aux_next and * aux_prev fields. * * This field is NULL if the list is empty. * * dLRU_list_len: Number of cache entries currently on the dirty LRU list. * * Observe that cLRU_list_len + dLRU_list_len must always * equal LRU_list_len. * * dLRU_list_size: Number of cache entries currently on the dirty LRU list. * * Observe that cLRU_list_len + dLRU_list_len must always * equal LRU_list_len. * * dLRU_head_ptr: Pointer to the head of the doubly linked dirty LRU list. * Cache entries on this list are linked by their aux_next and * aux_prev fields. * * This field is NULL if the list is empty. * * dLRU_tail_ptr: Pointer to the tail of the doubly linked dirty LRU list. * Cache entries on this list are linked by their aux_next and * aux_prev fields. * * This field is NULL if the list is empty. * * * Automatic cache size adjustment: * * While the default cache size is adequate for most cases, we can run into * cases where the default is too small. Ideally, we will let the user * adjust the cache size as required. However, this is not possible in all * cases. Thus I have added automatic cache size adjustment code. * * The configuration for the automatic cache size adjustment is stored in * the structure described below: * * size_increase_possible: Depending on the configuration data given * in the resize_ctl field, it may or may not be possible * to increase the size of the cache. Rather than test for * all the ways this can happen, we simply set this flag when * we receive a new configuration. * * flash_size_increase_possible: Depending on the configuration data given * in the resize_ctl field, it may or may not be possible * for a flash size increase to occur. We set this flag * whenever we receive a new configuration so as to avoid * repeated calculations. * * flash_size_increase_threshold: If a flash cache size increase is possible, * this field is used to store the minimum size of a new entry * or size increase needed to trigger a flash cache size * increase. Note that this field must be updated whenever * the size of the cache is changed. * * size_decrease_possible: Depending on the configuration data given * in the resize_ctl field, it may or may not be possible * to decrease the size of the cache. Rather than test for * all the ways this can happen, we simply set this flag when * we receive a new configuration. * * resize_enabled: This is another convenience flag which is set whenever * a new set of values for resize_ctl are provided. Very * simply, * * resize_enabled = size_increase_possible || * size_decrease_possible; * * cache_full: Boolean flag used to keep track of whether the cache is * full, so we can refrain from increasing the size of a * cache which hasn't used up the space allotted to it. * * The field is initialized to FALSE, and then set to TRUE * whenever we attempt to make space in the cache. * * size_decreased: Boolean flag set to TRUE whenever the maximum cache * size is decreased. The flag triggers a call to * H5C__make_space_in_cache() on the next call to H5C_protect(). * * resize_in_progress: As the metadata cache has become re-entrant, it is * possible that a protect may trigger a call to * H5C__auto_adjust_cache_size(), which may trigger a flush, * which may trigger a protect, which will result in another * call to H5C__auto_adjust_cache_size(). * * The resize_in_progress boolean flag is used to detect this, * and to prevent the infinite recursion that would otherwise * occur. * * Note that this issue is not hypothetical -- this field * was added 12/29/15 to fix a bug exposed in the testing * of changes to the file driver info superblock extension * management code needed to support rings. * * resize_ctl: Instance of H5C_auto_size_ctl_t containing configuration * data for automatic cache resizing. * * epoch_markers_active: Integer field containing the number of epoch * markers currently in use in the LRU list. This value * must be in the range [0, H5C__MAX_EPOCH_MARKERS - 1]. * * epoch_marker_active: Array of boolean of length H5C__MAX_EPOCH_MARKERS. * This array is used to track which epoch markers are currently * in use. * * epoch_marker_ringbuf: Array of int of length H5C__MAX_EPOCH_MARKERS + 1. * * To manage the epoch marker cache entries, it is necessary * to track their order in the LRU list. This is done with * epoch_marker_ringbuf. When markers are inserted at the * head of the LRU list, the index of the marker in the * epoch_markers array is inserted at the tail of the ring * buffer. When it becomes the epoch_marker_active'th marker * in the LRU list, it will have worked its way to the head * of the ring buffer as well. This allows us to remove it * without scanning the LRU list if such is required. * * epoch_marker_ringbuf_first: Integer field containing the index of the * first entry in the ring buffer. * * epoch_marker_ringbuf_last: Integer field containing the index of the * last entry in the ring buffer. * * epoch_marker_ringbuf_size: Integer field containing the number of entries * in the ring buffer. * * epoch_markers: Array of instances of H5C_cache_entry_t of length * H5C__MAX_EPOCH_MARKERS. The entries are used as markers * in the LRU list to identify cache entries that haven't * been accessed for some (small) specified number of * epochs. These entries (if any) can then be evicted and * the cache size reduced -- ideally without evicting any * of the current working set. Needless to say, the epoch * length and the number of epochs before an unused entry * must be chosen so that all, or almost all, the working * set will be accessed before the limit. * * Epoch markers only appear in the LRU list, never in * the index or slist. While they are of type * H5C__EPOCH_MARKER_TYPE, and have associated class * functions, these functions should never be called. * * The addr fields of these instances of H5C_cache_entry_t * are set to the index of the instance in the epoch_markers * array, the size is set to 0, and the type field points * to the constant structure epoch_marker_class defined * in H5C.c. The next and prev fields are used as usual * to link the entry into the LRU list. * * All other fields are unused. * * * Cache hit rate collection fields: * * We supply the current cache hit rate on request, so we must keep a * simple cache hit rate computation regardless of whether statistics * collection is enabled. The following fields support this capability. * * cache_hits: Number of cache hits since the last time the cache hit * rate statistics were reset. Note that when automatic cache * re-sizing is enabled, this field will be reset every automatic * resize epoch. * * cache_accesses: Number of times the cache has been accessed while * since the last since the last time the cache hit rate statistics * were reset. Note that when automatic cache re-sizing is enabled, * this field will be reset every automatic resize epoch. * * * Metadata cache image management related fields. * * image_ctl: Instance of H5C_cache_image_ctl_t containing configuration * data for generation of a cache image on file close. * * serialization_in_progress: Boolean field that is set to TRUE iff * the cache is in the process of being serialized. This * field is needed to support the H5C_serialization_in_progress() * call, which is in turn required for sanity checks in some * cache clients. * * load_image: Boolean flag indicating that the metadata cache image * superblock extension message exists and should be * read, and the image block read and decoded on the next * call to H5C_protect(). * * image_loaded: Boolean flag indicating that the metadata cache has * loaded the metadata cache image as directed by the * MDC cache image superblock extension message. * * delete_image: Boolean flag indicating whether the metadata cache image * superblock message should be deleted and the cache image * file space freed after they have been read and decoded. * * This flag should be set to TRUE iff the file is opened * R/W and there is a cache image to be read. * * image_addr: haddr_t containing the base address of the on disk * metadata cache image, or HADDR_UNDEF if that value is * undefined. Note that this field is used both in the * construction and write, and the read and decode of * metadata cache image blocks. * * image_len: hsize_t containing the size of the on disk metadata cache * image, or zero if that value is undefined. Note that this * field is used both in the construction and write, and the * read and decode of metadata cache image blocks. * * image_data_len: size_t containing the number of bytes of data in the * on disk metadata cache image, or zero if that value is * undefined. * * In most cases, this value is the same as the image_len * above. It exists to allow for metadata cache image blocks * that are larger than the actual image. Thus in all * cases image_data_len <= image_len. * * To create the metadata cache image, we must first serialize all the * entries in the metadata cache. This is done by a scan of the index. * As entries must be serialized in increasing flush dependency height * order, we scan the index repeatedly, once for each flush dependency * height in increasing order. * * This operation is complicated by the fact that entries other the the * target may be inserted, loaded, relocated, or removed from the cache * (either by eviction or the take ownership flag) as the result of a * pre_serialize or serialize callback. While entry removals are not * a problem for the scan of the index, insertions, loads, and relocations * are. Hence the entries loaded, inserted, and relocated counters * listed below have been implemented to allow these conditions to be * detected and dealt with by restarting the scan. * * The serialization operation is further complicated by the fact that * the flush dependency height of a given entry may increase (as the * result of an entry load or insert) or decrease (as the result of an * entry removal -- via either eviction or the take ownership flag). The * entry_fd_height_change_counter field is maintained to allow detection * of this condition, and a restart of the scan when it occurs. * * Note that all these new fields would work just as well as booleans. * * entries_loaded_counter: Number of entries loaded into the cache * since the last time this field was reset. * * entries_inserted_counter: Number of entries inserted into the cache * since the last time this field was reset. * * entries relocated_counter: Number of entries whose base address has * been changed since the last time this field was reset. * * entry_fd_height_change_counter: Number of entries whose flush dependency * height has changed since the last time this field was reset. * * The following fields are used assemble the cache image prior to * writing it to disk. * * num_entries_in_image: Unsigned integer field containing the number of entries * to be copied into the metadata cache image. Note that * this value will be less than the number of entries in * the cache, and the superblock and its related entries * are not written to the metadata cache image. * * image_entries: Pointer to a dynamically allocated array of instance of * H5C_image_entry_t of length num_entries_in_image, or NULL * if that array does not exist. This array is used to * assemble entry data to be included in the image, and to * sort them by flush dependency height and LRU rank. * * image_buffer: Pointer to the dynamically allocated buffer of length * image_len in which the metadata cache image is assembled, * or NULL if that buffer does not exist. * * * Free Space Manager Related fields: * * The free space managers must be informed when we are about to close * or flush the file so that they order themselves accordingly. This used * to be done much later in the close process, but with cache image and * page buffering, this is no longer viable, as we must finalize the on * disk image of all metadata much sooner. * * This is handled by the H5FS_settle_raw_data_fsm() and * H5FS_settle_meta_data_fsm() routines. As these calls are expensive, * the following fields are used to track whether the target free space * managers are clean. * * They are also used in sanity checking, as once a free space manager is * settled, it should not become unsettled (i.e. be asked to allocate or * free file space) either ever (in the case of a file close) or until the * flush is complete. * * rdfsm_settled: Boolean flag indicating whether the raw data free space * manager is settled -- i.e. whether the correct space has * been allocated for it in the file. * * Note that the name of this field is deceptive. In the * multi file case, the flag applies to all free space * managers that are not involved in allocating space for * free space manager metadata. * * mdfsm_settled: Boolean flag indicating whether the meta data free space * manager is settled -- i.e. whether the correct space has * been allocated for it in the file. * * Note that the name of this field is deceptive. In the * multi file case, the flag applies only to free space * managers that are involved in allocating space for free * space managers. * * * Statistics collection fields: * * When enabled, these fields are used to collect statistics as described * below. The first set are collected only when H5C_COLLECT_CACHE_STATS * is true. * * hits: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the number of times an entry with type id * equal to the array index has been in cache when requested in * the current epoch. * * misses: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the number of times an entry with type id * equal to the array index has not been in cache when * requested in the current epoch. * * write_protects: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. The * cells are used to record the number of times an entry with * type id equal to the array index has been write protected * in the current epoch. * * Observe that (hits + misses) = (write_protects + read_protects). * * read_protects: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. The * cells are used to record the number of times an entry with * type id equal to the array index has been read protected in * the current epoch. * * Observe that (hits + misses) = (write_protects + read_protects). * * max_read_protects: Array of int32 of length H5C__MAX_NUM_TYPE_IDS + 1. * The cells are used to maximum number of simultaneous read * protects on any entry with type id equal to the array index * in the current epoch. * * insertions: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the number of times an entry with type * id equal to the array index has been inserted into the * cache in the current epoch. * * pinned_insertions: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. * The cells are used to record the number of times an entry * with type id equal to the array index has been inserted * pinned into the cache in the current epoch. * * clears: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the number of times a dirty entry with type * id equal to the array index has been cleared in the current * epoch. * * flushes: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the number of times an entry with type id * equal to the array index has been written to disk in the * current epoch. * * evictions: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the number of times an entry with type id * equal to the array index has been evicted from the cache in * the current epoch. * * take_ownerships: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. The * cells are used to record the number of times an entry with * type id equal to the array index has been removed from the * cache via the H5C__TAKE_OWNERSHIP_FLAG in the current epoch. * * moves: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the number of times an entry with type * id equal to the array index has been moved in the current * epoch. * * entry_flush_moves: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. * The cells are used to record the number of times an entry * with type id equal to the array index has been moved * during its pre-serialize callback in the current epoch. * * cache_flush_moves: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. * The cells are used to record the number of times an entry * with type id equal to the array index has been moved * during a cache flush in the current epoch. * * pins: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the number of times an entry with type * id equal to the array index has been pinned in the current * epoch. * * unpins: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the number of times an entry with type * id equal to the array index has been unpinned in the current * epoch. * * dirty_pins: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the number of times an entry with type * id equal to the array index has been marked dirty while pinned * in the current epoch. * * pinned_flushes: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. The * cells are used to record the number of times an entry * with type id equal to the array index has been flushed while * pinned in the current epoch. * * pinned_clears: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. The * cells are used to record the number of times an entry * with type id equal to the array index has been cleared while * pinned in the current epoch. * * size_increases: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. * The cells are used to record the number of times an entry * with type id equal to the array index has increased in * size in the current epoch. * * size_decreases: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. * The cells are used to record the number of times an entry * with type id equal to the array index has decreased in * size in the current epoch. * * entry_flush_size_changes: Array of int64 of length * H5C__MAX_NUM_TYPE_IDS + 1. The cells are used to record * the number of times an entry with type id equal to the * array index has changed size while in its pre-serialize * callback. * * cache_flush_size_changes: Array of int64 of length * H5C__MAX_NUM_TYPE_IDS + 1. The cells are used to record * the number of times an entry with type id equal to the * array index has changed size during a cache flush * * total_ht_insertions: Number of times entries have been inserted into the * hash table in the current epoch. * * total_ht_deletions: Number of times entries have been deleted from the * hash table in the current epoch. * * successful_ht_searches: int64 containing the total number of successful * searches of the hash table in the current epoch. * * total_successful_ht_search_depth: int64 containing the total number of * entries other than the targets examined in successful * searches of the hash table in the current epoch. * * failed_ht_searches: int64 containing the total number of unsuccessful * searches of the hash table in the current epoch. * * total_failed_ht_search_depth: int64 containing the total number of * entries examined in unsuccessful searches of the hash * table in the current epoch. * * max_index_len: Largest value attained by the index_len field in the * current epoch. * * max_index_size: Largest value attained by the index_size field in the * current epoch. * * max_clean_index_size: Largest value attained by the clean_index_size field * in the current epoch. * * max_dirty_index_size: Largest value attained by the dirty_index_size field * in the current epoch. * * max_slist_len: Largest value attained by the slist_len field in the * current epoch. * * max_slist_size: Largest value attained by the slist_size field in the * current epoch. * * max_pl_len: Largest value attained by the pl_len field in the * current epoch. * * max_pl_size: Largest value attained by the pl_size field in the * current epoch. * * max_pel_len: Largest value attained by the pel_len field in the * current epoch. * * max_pel_size: Largest value attained by the pel_size field in the * current epoch. * * calls_to_msic: Total number of calls to H5C__make_space_in_cache * * total_entries_skipped_in_msic: Number of clean entries skipped while * enforcing the min_clean_fraction in H5C__make_space_in_cache(). * * total_entries_scanned_in_msic: Number of clean entries skipped while * enforcing the min_clean_fraction in H5C__make_space_in_cache(). * * max_entries_skipped_in_msic: Maximum number of clean entries skipped * in any one call to H5C__make_space_in_cache(). * * max_entries_scanned_in_msic: Maximum number of entries scanned over * in any one call to H5C__make_space_in_cache(). * * entries_scanned_to_make_space: Number of entries scanned only when looking * for entries to evict in order to make space in cache. * * * The following fields track statistics on cache images. * * images_created: Integer field containing the number of cache images * created since the last time statistics were reset. * * At present, this field must always be either 0 or 1. * Further, since cache images are only created at file * close, this field should only be set at that time. * * images_loaded: Integer field containing the number of cache images * loaded since the last time statistics were reset. * * At present, this field must always be either 0 or 1. * Further, since cache images are only loaded at the * time of the first protect or on file close, this value * should only change on those events. * * last_image_size: Size of the most recently loaded metadata cache image * loaded into the cache, or zero if no image has been * loaded. * * At present, at most one cache image can be loaded into * the metadata cache for any given file, and this image * will be loaded either on the first protect, or on file * close if no entry is protected before then. * * * Fields for tracking prefetched entries. Note that flushes and evictions * of prefetched entries are tracked in the flushes and evictions arrays * discused above. * * prefetches: Number of prefetched entries that are loaded to the * cache. * * dirty_prefetches: Number of dirty prefetched entries that are loaded * into the cache. * * prefetch_hits: Number of prefetched entries that are actually used. * * * As entries are now capable of moving, loading, dirtying, and deleting * other entries in their pre_serialize and serialize callbacks, it has * been necessary to insert code to restart scans of lists so as to avoid * improper behavior if the next entry in the list is the target of one on * these operations. * * The following fields are use to count such occurances. They are used * both in tests (to verify that the scan has been restarted), and to * obtain estimates of how frequently these restarts occur. * * slist_scan_restarts: Number of times a scan of the slist (that contains * calls to H5C__flush_single_entry()) has been restarted to * avoid potential issues with change of status of the next * entry in the scan. * * LRU_scan_restarts: Number of times a scan of the LRU list (that contains * calls to H5C__flush_single_entry()) has been restarted to * avoid potential issues with change of status of the next * entry in the scan. * * index_scan_restarts: Number of times a scan of the index has been * restarted to avoid potential issues with load, insertion * or change in flush dependency height of an entry other * than the target entry as the result of call(s) to the * pre_serialize or serialize callbacks. * * Note that at present, this condition can only be triggerd * by a call to H5C_serialize_single_entry(). * * The remaining stats are collected only when both H5C_COLLECT_CACHE_STATS * and H5C_COLLECT_CACHE_ENTRY_STATS are true. * * max_accesses: Array of int32 of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the maximum number of times any single * entry with type id equal to the array index has been * accessed in the current epoch. * * min_accesses: Array of int32 of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the minimum number of times any single * entry with type id equal to the array index has been * accessed in the current epoch. * * max_clears: Array of int32 of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the maximum number of times any single * entry with type id equal to the array index has been cleared * in the current epoch. * * max_flushes: Array of int32 of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the maximum number of times any single * entry with type id equal to the array index has been * flushed in the current epoch. * * max_size: Array of size_t of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the maximum size of any single entry * with type id equal to the array index that has resided in * the cache in the current epoch. * * max_pins: Array of size_t of length H5C__MAX_NUM_TYPE_IDS + 1. The cells * are used to record the maximum number of times that any single * entry with type id equal to the array index that has been * marked as pinned in the cache in the current epoch. * * * Fields supporting testing: * * prefix Array of char used to prefix debugging output. The * field is intended to allow marking of output of with * the processes mpi rank. * * get_entry_ptr_from_addr_counter: Counter used to track the number of * times the H5C_get_entry_ptr_from_addr() function has been * called successfully. This field is only defined when * NDEBUG is not #defined. * ****************************************************************************/ struct H5C_t { uint32_t magic; hbool_t flush_in_progress; FILE * trace_file_ptr; hbool_t logging_enabled; hbool_t currently_logging; FILE * log_file_ptr; void * aux_ptr; int32_t max_type_id; const H5C_class_t * const *class_table_ptr; size_t max_cache_size; size_t min_clean_size; H5C_write_permitted_func_t check_write_permitted; hbool_t write_permitted; H5C_log_flush_func_t log_flush; hbool_t evictions_enabled; hbool_t close_warning_received; /* Fields for maintaining [hash table] index of entries */ uint32_t index_len; size_t index_size; uint32_t index_ring_len[H5C_RING_NTYPES]; size_t index_ring_size[H5C_RING_NTYPES]; size_t clean_index_size; size_t clean_index_ring_size[H5C_RING_NTYPES]; size_t dirty_index_size; size_t dirty_index_ring_size[H5C_RING_NTYPES]; H5C_cache_entry_t * index[H5C__HASH_TABLE_LEN]; uint32_t il_len; size_t il_size; H5C_cache_entry_t * il_head; H5C_cache_entry_t * il_tail; /* Fields to detect entries removed during scans */ int64_t entries_removed_counter; H5C_cache_entry_t * last_entry_removed_ptr; H5C_cache_entry_t * entry_watched_for_removal; /* Fields for maintaining list of in-order entries, for flushing */ hbool_t slist_changed; uint32_t slist_len; size_t slist_size; uint32_t slist_ring_len[H5C_RING_NTYPES]; size_t slist_ring_size[H5C_RING_NTYPES]; H5SL_t * slist_ptr; uint32_t num_last_entries; #if H5C_DO_SANITY_CHECKS int64_t slist_len_increase; int64_t slist_size_increase; #endif /* H5C_DO_SANITY_CHECKS */ /* Fields for maintaining list of tagged entries */ H5SL_t * tag_list; hbool_t ignore_tags; /* Fields for tracking protected entries */ uint32_t pl_len; size_t pl_size; H5C_cache_entry_t * pl_head_ptr; H5C_cache_entry_t * pl_tail_ptr; /* Fields for tracking pinned entries */ uint32_t pel_len; size_t pel_size; H5C_cache_entry_t * pel_head_ptr; H5C_cache_entry_t * pel_tail_ptr; /* Fields for complete LRU list of entries */ uint32_t LRU_list_len; size_t LRU_list_size; H5C_cache_entry_t * LRU_head_ptr; H5C_cache_entry_t * LRU_tail_ptr; /* Fields for clean LRU list of entries */ uint32_t cLRU_list_len; size_t cLRU_list_size; H5C_cache_entry_t * cLRU_head_ptr; H5C_cache_entry_t * cLRU_tail_ptr; /* Fields for dirty LRU list of entries */ uint32_t dLRU_list_len; size_t dLRU_list_size; H5C_cache_entry_t * dLRU_head_ptr; H5C_cache_entry_t * dLRU_tail_ptr; #ifdef H5_HAVE_PARALLEL /* Fields for collective metadata reads */ uint32_t coll_list_len; size_t coll_list_size; H5C_cache_entry_t * coll_head_ptr; H5C_cache_entry_t * coll_tail_ptr; /* Fields for collective metadata writes */ H5SL_t * coll_write_list; #endif /* H5_HAVE_PARALLEL */ /* Fields for automatic cache size adjustment */ hbool_t size_increase_possible; hbool_t flash_size_increase_possible; size_t flash_size_increase_threshold; hbool_t size_decrease_possible; hbool_t resize_enabled; hbool_t cache_full; hbool_t size_decreased; hbool_t resize_in_progress; H5C_auto_size_ctl_t resize_ctl; /* Fields for epoch markers used in automatic cache size adjustment */ int32_t epoch_markers_active; hbool_t epoch_marker_active[H5C__MAX_EPOCH_MARKERS]; int32_t epoch_marker_ringbuf[H5C__MAX_EPOCH_MARKERS+1]; int32_t epoch_marker_ringbuf_first; int32_t epoch_marker_ringbuf_last; int32_t epoch_marker_ringbuf_size; H5C_cache_entry_t epoch_markers[H5C__MAX_EPOCH_MARKERS]; /* Fields for cache hit rate collection */ int64_t cache_hits; int64_t cache_accesses; /* fields supporting generation of a cache image on file close */ H5C_cache_image_ctl_t image_ctl; hbool_t serialization_in_progress; hbool_t load_image; hbool_t image_loaded; hbool_t delete_image; haddr_t image_addr; hsize_t image_len; hsize_t image_data_len; int64_t entries_loaded_counter; int64_t entries_inserted_counter; int64_t entries_relocated_counter; int64_t entry_fd_height_change_counter; uint32_t num_entries_in_image; H5C_image_entry_t * image_entries; void * image_buffer; /* Free Space Manager Related fields */ hbool_t rdfsm_settled; hbool_t mdfsm_settled; #if H5C_COLLECT_CACHE_STATS /* stats fields */ int64_t hits[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t misses[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t write_protects[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t read_protects[H5C__MAX_NUM_TYPE_IDS + 1]; int32_t max_read_protects[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t insertions[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t pinned_insertions[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t clears[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t flushes[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t evictions[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t take_ownerships[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t moves[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t entry_flush_moves[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t cache_flush_moves[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t pins[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t unpins[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t dirty_pins[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t pinned_flushes[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t pinned_clears[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t size_increases[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t size_decreases[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t entry_flush_size_changes[H5C__MAX_NUM_TYPE_IDS + 1]; int64_t cache_flush_size_changes[H5C__MAX_NUM_TYPE_IDS + 1]; /* Fields for hash table operations */ int64_t total_ht_insertions; int64_t total_ht_deletions; int64_t successful_ht_searches; int64_t total_successful_ht_search_depth; int64_t failed_ht_searches; int64_t total_failed_ht_search_depth; uint32_t max_index_len; size_t max_index_size; size_t max_clean_index_size; size_t max_dirty_index_size; /* Fields for in-order skip list */ uint32_t max_slist_len; size_t max_slist_size; /* Fields for protected entry list */ uint32_t max_pl_len; size_t max_pl_size; /* Fields for pinned entry list */ uint32_t max_pel_len; size_t max_pel_size; /* Fields for tracking 'make space in cache' (msic) operations */ int64_t calls_to_msic; int64_t total_entries_skipped_in_msic; int64_t total_entries_scanned_in_msic; int32_t max_entries_skipped_in_msic; int32_t max_entries_scanned_in_msic; int64_t entries_scanned_to_make_space; /* Fields for tracking skip list scan restarts */ int64_t slist_scan_restarts; int64_t LRU_scan_restarts; int64_t index_scan_restarts; /* Fields for tracking cache image operations */ int32_t images_created; int32_t images_loaded; hsize_t last_image_size; /* Fields for tracking prefetched entries */ int64_t prefetches; int64_t dirty_prefetches; int64_t prefetch_hits; #if H5C_COLLECT_CACHE_ENTRY_STATS int32_t max_accesses[H5C__MAX_NUM_TYPE_IDS + 1]; int32_t min_accesses[H5C__MAX_NUM_TYPE_IDS + 1]; int32_t max_clears[H5C__MAX_NUM_TYPE_IDS + 1]; int32_t max_flushes[H5C__MAX_NUM_TYPE_IDS + 1]; size_t max_size[H5C__MAX_NUM_TYPE_IDS + 1]; int32_t max_pins[H5C__MAX_NUM_TYPE_IDS + 1]; #endif /* H5C_COLLECT_CACHE_ENTRY_STATS */ #endif /* H5C_COLLECT_CACHE_STATS */ char prefix[H5C__PREFIX_LEN]; #ifndef NDEBUG int64_t get_entry_ptr_from_addr_counter; #endif /* NDEBUG */ }; /* Define typedef for tagged cache entry iteration callbacks */ typedef int (*H5C_tag_iter_cb_t)(H5C_cache_entry_t *entry, void *ctx); /*****************************/ /* Package Private Variables */ /*****************************/ /******************************/ /* Package Private Prototypes */ /******************************/ H5_DLL herr_t H5C__prep_image_for_file_close(H5F_t *f, hid_t dxpl_id); H5_DLL herr_t H5C__deserialize_prefetched_entry(H5F_t * f, hid_t dxpl_id, H5C_t * cache_ptr, H5C_cache_entry_t** entry_ptr_ptr, const H5C_class_t * type, haddr_t addr, void * udata); /* General routines */ H5_DLL herr_t H5C__flush_single_entry(H5F_t *f, hid_t dxpl_id, H5C_cache_entry_t *entry_ptr, unsigned flags); H5_DLL herr_t H5C__generate_cache_image(H5F_t *f, hid_t dxpl_id, H5C_t *cache_ptr); H5_DLL herr_t H5C__load_cache_image(H5F_t *f, hid_t dxpl_id); H5_DLL herr_t H5C__mark_flush_dep_serialized(H5C_cache_entry_t * entry_ptr); H5_DLL herr_t H5C__mark_flush_dep_unserialized(H5C_cache_entry_t * entry_ptr); H5_DLL herr_t H5C__make_space_in_cache(H5F_t * f, hid_t dxpl_id, size_t space_needed, hbool_t write_permitted); H5_DLL herr_t H5C__flush_marked_entries(H5F_t * f, hid_t dxpl_id); H5_DLL herr_t H5C__generate_image(H5F_t *f, H5C_t *cache_ptr, H5C_cache_entry_t *entry_ptr, hid_t dxpl_id); H5_DLL herr_t H5C__iter_tagged_entries(H5C_t *cache, haddr_t tag, hbool_t match_global, H5C_tag_iter_cb_t cb, void *cb_ctx); /* Routines for operating on entry tags */ H5_DLL herr_t H5C__tag_entry(H5C_t * cache_ptr, H5C_cache_entry_t * entry_ptr, hid_t dxpl_id); H5_DLL herr_t H5C__untag_entry(H5C_t *cache, H5C_cache_entry_t *entry); /* Testing functions */ #ifdef H5C_TESTING H5_DLL herr_t H5C__verify_cork_tag_test(hid_t fid, haddr_t tag, hbool_t status); #endif /* H5C_TESTING */ #endif /* _H5Cpkg_H */