/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the COPYING file, which can be found at the root of the source code * * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. * * If you do not have access to either file, you may request a copy from * * help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /*------------------------------------------------------------------------- * * Created: H5Cprivate.h * 6/3/04 * John Mainzer * * Purpose: Constants and typedefs available to the rest of the * library. * *------------------------------------------------------------------------- */ #ifndef _H5Cprivate_H #define _H5Cprivate_H #include "H5Cpublic.h" /* public prototypes */ /* Private headers needed by this header */ #include "H5private.h" /* Generic Functions */ #include "H5Fprivate.h" /* File access */ /**************************/ /* Library Private Macros */ /**************************/ /* Cache configuration settings */ #define H5C__MAX_NUM_TYPE_IDS 30 #define H5C__PREFIX_LEN 32 /* This sanity checking constant was picked out of the air. Increase * or decrease it if appropriate. Its purposes is to detect corrupt * object sizes, so it probably doesn't matter if it is a bit big. * * JRM - 5/17/04 */ #define H5C_MAX_ENTRY_SIZE ((size_t)(32 * 1024 * 1024)) #ifdef H5_HAVE_PARALLEL /* we must maintain the clean and dirty LRU lists when we are compiled * with parallel support. */ #define H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS 1 #else /* H5_HAVE_PARALLEL */ /* The clean and dirty LRU lists don't buy us anything here -- we may * want them on for testing on occasion, but in general they should be * off. */ #define H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS 0 #endif /* H5_HAVE_PARALLEL */ /* Flags for cache client class behavior */ #define H5C__CLASS_NO_FLAGS_SET ((unsigned)0x0) #define H5C__CLASS_SPECULATIVE_LOAD_FLAG ((unsigned)0x1) /* The following flags may only appear in test code */ #define H5C__CLASS_SKIP_READS ((unsigned)0x2) #define H5C__CLASS_SKIP_WRITES ((unsigned)0x4) /* Flags for pre-serialize callback */ #define H5C__SERIALIZE_NO_FLAGS_SET ((unsigned)0) #define H5C__SERIALIZE_RESIZED_FLAG ((unsigned)0x1) #define H5C__SERIALIZE_MOVED_FLAG ((unsigned)0x2) /* Upper and lower limits on cache size. These limits are picked * out of a hat -- you should be able to change them as necessary. * * However, if you need a very big cache, you should also increase the * size of the hash table (H5C__HASH_TABLE_LEN in H5Cpkg.h). The current * upper bound on cache size is rather large for the current hash table * size. */ #define H5C__MAX_MAX_CACHE_SIZE ((size_t)(128 * 1024 * 1024)) #define H5C__MIN_MAX_CACHE_SIZE ((size_t)(1024)) /* Default max cache size and min clean size are give here to make * them generally accessible. */ #define H5C__DEFAULT_MAX_CACHE_SIZE ((size_t)(4 * 1024 * 1024)) #define H5C__DEFAULT_MIN_CLEAN_SIZE ((size_t)(2 * 1024 * 1024)) /* Values for cache entry magic field */ #define H5C__H5C_CACHE_ENTRY_T_MAGIC 0x005CAC0A #define H5C__H5C_CACHE_ENTRY_T_BAD_MAGIC 0xDeadBeef /* Cache configuration validation definitions */ #define H5C_RESIZE_CFG__VALIDATE_GENERAL 0x1 #define H5C_RESIZE_CFG__VALIDATE_INCREMENT 0x2 #define H5C_RESIZE_CFG__VALIDATE_DECREMENT 0x4 #define H5C_RESIZE_CFG__VALIDATE_INTERACTIONS 0x8 /* clang-format off */ #define H5C_RESIZE_CFG__VALIDATE_ALL \ ( \ H5C_RESIZE_CFG__VALIDATE_GENERAL | \ H5C_RESIZE_CFG__VALIDATE_INCREMENT | \ H5C_RESIZE_CFG__VALIDATE_DECREMENT | \ H5C_RESIZE_CFG__VALIDATE_INTERACTIONS \ ) /* clang-format on */ /* Cache configuration versions */ #define H5C__CURR_AUTO_SIZE_CTL_VER 1 #define H5C__CURR_AUTO_RESIZE_RPT_FCN_VER 1 #define H5C__CURR_CACHE_IMAGE_CTL_VER 1 /* Default configuration settings */ #define H5C__DEF_AR_UPPER_THRESHHOLD 0.9999f #define H5C__DEF_AR_LOWER_THRESHHOLD 0.9f #define H5C__DEF_AR_MAX_SIZE ((size_t)(16 * 1024 * 1024)) #define H5C__DEF_AR_INIT_SIZE ((size_t)( 1 * 1024 * 1024)) #define H5C__DEF_AR_MIN_SIZE ((size_t)( 1 * 1024 * 1024)) #define H5C__DEF_AR_MIN_CLEAN_FRAC 0.5f #define H5C__DEF_AR_INCREMENT 2.0f #define H5C__DEF_AR_MAX_INCREMENT ((size_t)( 2 * 1024 * 1024)) #define H5C__DEF_AR_FLASH_MULTIPLE 1.0f #define H5C__DEV_AR_FLASH_THRESHOLD 0.25f #define H5C__DEF_AR_DECREMENT 0.9f #define H5C__DEF_AR_MAX_DECREMENT ((size_t)( 1 * 1024 * 1024)) #define H5C__DEF_AR_EPCHS_B4_EVICT 3 #define H5C__DEF_AR_EMPTY_RESERVE 0.05f #define H5C__MIN_AR_EPOCH_LENGTH 100 #define H5C__DEF_AR_EPOCH_LENGTH 50000 #define H5C__MAX_AR_EPOCH_LENGTH 1000000 /* #defines of flags used in the flags parameters in some of the * following function calls. Note that not all flags are applicable * to all function calls. Flags that don't apply to a particular * function are ignored in that function. * * These flags apply to all function calls: * H5C__NO_FLAGS_SET (generic "no flags set" for all fcn calls) * * * These flags apply to H5C_insert_entry(): * H5C__SET_FLUSH_MARKER_FLAG * H5C__PIN_ENTRY_FLAG * H5C__FLUSH_LAST_FLAG ; super block only * H5C__FLUSH_COLLECTIVELY_FLAG ; super block only * * These flags apply to H5C_protect() * H5C__READ_ONLY_FLAG * H5C__FLUSH_LAST_FLAG ; super block only * H5C__FLUSH_COLLECTIVELY_FLAG ; super block only * * These flags apply to H5C_unprotect(): * H5C__SET_FLUSH_MARKER_FLAG * H5C__DELETED_FLAG * H5C__DIRTIED_FLAG * H5C__PIN_ENTRY_FLAG * H5C__UNPIN_ENTRY_FLAG * H5C__FREE_FILE_SPACE_FLAG * H5C__TAKE_OWNERSHIP_FLAG * * These flags apply to H5C_expunge_entry(): * H5C__FREE_FILE_SPACE_FLAG * * These flags apply to H5C_evict(): * H5C__EVICT_ALLOW_LAST_PINS_FLAG * * These flags apply to H5C_flush_cache(): * H5C__FLUSH_INVALIDATE_FLAG * H5C__FLUSH_CLEAR_ONLY_FLAG * H5C__FLUSH_MARKED_ENTRIES_FLAG * H5C__FLUSH_IGNORE_PROTECTED_FLAG (can't use this flag in combination * with H5C__FLUSH_INVALIDATE_FLAG) * H5C__DURING_FLUSH_FLAG * * These flags apply to H5C_flush_single_entry(): * H5C__FLUSH_INVALIDATE_FLAG * H5C__FLUSH_CLEAR_ONLY_FLAG * H5C__FLUSH_MARKED_ENTRIES_FLAG * H5C__TAKE_OWNERSHIP_FLAG * H5C__DEL_FROM_SLIST_ON_DESTROY_FLAG * H5C__GENERATE_IMAGE_FLAG * H5C__UPDATE_PAGE_BUFFER_FLAG */ #define H5C__NO_FLAGS_SET 0x00000 #define H5C__SET_FLUSH_MARKER_FLAG 0x00001 #define H5C__DELETED_FLAG 0x00002 #define H5C__DIRTIED_FLAG 0x00004 #define H5C__PIN_ENTRY_FLAG 0x00008 #define H5C__UNPIN_ENTRY_FLAG 0x00010 #define H5C__FLUSH_INVALIDATE_FLAG 0x00020 #define H5C__FLUSH_CLEAR_ONLY_FLAG 0x00040 #define H5C__FLUSH_MARKED_ENTRIES_FLAG 0x00080 #define H5C__FLUSH_IGNORE_PROTECTED_FLAG 0x00100 #define H5C__READ_ONLY_FLAG 0x00200 #define H5C__FREE_FILE_SPACE_FLAG 0x00400 #define H5C__TAKE_OWNERSHIP_FLAG 0x00800 #define H5C__FLUSH_LAST_FLAG 0x01000 #define H5C__FLUSH_COLLECTIVELY_FLAG 0x02000 #define H5C__EVICT_ALLOW_LAST_PINS_FLAG 0x04000 #define H5C__DEL_FROM_SLIST_ON_DESTROY_FLAG 0x08000 #define H5C__DURING_FLUSH_FLAG 0x10000 /* Set when the entire cache is being flushed */ #define H5C__GENERATE_IMAGE_FLAG 0x20000 /* Set during parallel I/O */ #define H5C__UPDATE_PAGE_BUFFER_FLAG 0x40000 /* Set during parallel I/O */ /* Debugging/sanity checking/statistics settings */ #ifndef NDEBUG #define H5C_DO_SANITY_CHECKS 1 #define H5C_DO_SLIST_SANITY_CHECKS 0 #define H5C_DO_TAGGING_SANITY_CHECKS 1 #define H5C_DO_EXTREME_SANITY_CHECKS 0 #else /* NDEBUG */ /* With rare execptions, the following defines should be set * to 0 if NDEBUG is defined */ #define H5C_DO_SANITY_CHECKS 0 #define H5C_DO_SLIST_SANITY_CHECKS 0 #define H5C_DO_TAGGING_SANITY_CHECKS 0 #define H5C_DO_EXTREME_SANITY_CHECKS 0 #endif /* NDEBUG */ /* Cork actions: cork/uncork/get cork status of an object */ #define H5C__SET_CORK 0x1 #define H5C__UNCORK 0x2 #define H5C__GET_CORKED 0x4 /* Note: The memory sanity checks aren't going to work until I/O filters are * changed to call a particular alloc/free routine for their buffers, * because the H5AC__SERIALIZE_RESIZED_FLAG set by the fractal heap * direct block serialize callback calls H5Z_pipeline(). When the I/O * filters are changed, then we should implement "cache image alloc/free" * routines that the fractal heap direct block (and global heap) serialize * calls can use when resizing (and re-allocating) their image in the * cache. -QAK */ #define H5C_DO_MEMORY_SANITY_CHECKS 0 /* H5C_COLLECT_CACHE_STATS controls overall collection of statistics * on cache activity. In general, this #define should be set to 1 in * debug mode, and 0 in production mode.. */ #ifndef NDEBUG #define H5C_COLLECT_CACHE_STATS 1 #else /* NDEBUG */ #define H5C_COLLECT_CACHE_STATS 0 #endif /* NDEBUG */ /* H5C_COLLECT_CACHE_ENTRY_STATS controls collection of statistics * in individual cache entries. * * H5C_COLLECT_CACHE_ENTRY_STATS should only be defined to true if * H5C_COLLECT_CACHE_STATS is also defined to true. */ #if H5C_COLLECT_CACHE_STATS #define H5C_COLLECT_CACHE_ENTRY_STATS 1 #else #define H5C_COLLECT_CACHE_ENTRY_STATS 0 #endif /* H5C_COLLECT_CACHE_STATS */ /****************************/ /* Library Private Typedefs */ /****************************/ /* Typedef for the main structure for the cache (defined in H5Cpkg.h) */ typedef struct H5C_t H5C_t; /* * * Struct H5C_class_t * * Instances of H5C_class_t are used to specify the callback functions * used by the metadata cache for each class of metadata cache entry. * The fields of the structure are discussed below: * * id: Integer field containing the unique ID of the class of metadata * cache entries. * * name: Pointer to a string containing the name of the class of metadata * cache entries. * * mem_type: Instance of H5FD_mem_t, that is used to supply the * mem type passed into H5F_block_read(). * * flags: Flags indicating class-specific behavior. * * Possible flags are: * * H5C__CLASS_NO_FLAGS_SET: No special processing. * * H5C__CLASS_SPECULATIVE_LOAD_FLAG: This flag is used only in * H5C_load_entry(). When it is set, entries are * permitted to change their sizes on the first attempt * to load. * * If the new size is larger than the old, the read buffer * is reallocated to the new size, loaded from file, and the * deserialize routine is called a second time on the * new buffer. The entry returned by the first call to * the deserialize routine is discarded (via the free_icr * call) after the new size is retrieved (via the image_len * call). Note that the new size is used as the size of the * entry in the cache. * * If the new size is smaller than the old, no new loads * or deserializes are performed, but the new size becomes * the size of the entry in the cache. * * When this flag is set, an attempt to read past the * end of file could occur. In this case, if the size * returned get_load_size callback would result in a * read past the end of file, the size is truncated to * avoid this, and processing proceeds as normal. * * The following flags may only appear in test code. * * H5C__CLASS_SKIP_READS: This flags is intended only for use in test * code. When it is set, reads on load will be skipped, * and an uninitialize buffer will be passed to the * deserialize function. * * H5C__CLASS_SKIP_WRITES: This flags is intended only for use in test * code. When it is set, writes of buffers prepared by the * serialize callback will be skipped. * * GET_INITIAL_LOAD_SIZE: Pointer to the 'get initial load size' function. * * This function determines the size based on the information in the * parameter "udata" or an initial speculative guess. The size is * returned in the parameter "image_len_ptr". * * For an entry with H5C__CLASS_NO_FLAGS_SET: * This function returns in "image_len_ptr" the on disk size of the * entry. * * For an entry with H5C__CLASS_SPECULATIVE_LOAD_FLAG: * This function returns in "image_len_ptr" an initial guess of the * entry's on disk size. This many bytes will be loaded from * the file and then passed to 'get_final_load_size' callback * for the actual (final) image length to be determined. * * The typedef for the get_initial_load_size callback is as follows: * * typedef herr_t (*H5C_get_initial_load_size_func_t)(void *udata_ptr, * size_t *image_len_ptr); * * The parameters of the get_initial_load_size callback are as follows: * * udata_ptr: Pointer to user data provided in the protect call, which * will also be passed through to the 'get_final_load_size', * 'verify_chksum', and 'deserialize' callbacks. * * image_len_ptr: Pointer to the length in bytes of the in-file image to * be deserialized is to be returned. * * This value is used by the cache to determine the size of * the disk image for the metadata, in order to read the disk * image from the file. * * Processing in the get_load_size function should proceed as follows: * * If successful, the function will place the length in the *image_len_ptr * associated with supplied user data and then return SUCCEED. * * On failure, the function must return FAIL and push error information * onto the error stack with the error API routines, without modifying * the value pointed to by image_len_ptr. * * * GET_FINAL_LOAD_SIZE: Pointer to the 'get final load size' function. * * This function determines the final size of a speculatively loaded * metadata cache entry based on the parameter "image" and the "udata" * parameters. This callback _must_ be implemented for cache clients * which set the H5C__CLASS_SPECULATIVE_LOAD_FLAG and must return the * actual length of on-disk image after being called once. * * This function might deserialize the needed metadata information to * determine the actual size. The size is returned in the parameter * "actual_len_ptr". * * The typedef for the get_load_size callback is as follows: * * typedef herr_t (*H5C_get_final_load_size_func_t)(const void *image_ptr, * size_t image_len, * void *udata_ptr, * size_t *actual_len_ptr); * * The parameters of the get_load_size callback are as follows: * * image_ptr: Pointer to a buffer containing the (possibly partial) * metadata read in. * * image_len: The length in bytes of the (possibly partial) in-file image * to be queried for an actual length. * * udata_ptr: Pointer to user data provided in the protect call, which * will also be passed through to the 'verify_chksum' and * 'deserialize' callbacks. * * actual_len_ptr: Pointer to the location containing the actual length * of the metadata entry on disk. * * Processing in the get_final_load_size function should proceed as follows: * * If successful, the function will place the length in the *actual_len_ptr * associated with supplied image and/or user data and then return SUCCEED. * * On failure, the function must return FAIL and push error information * onto the error stack with the error API routines, without modifying * the value pointed to by actual_len_ptr. * * * VERIFY_CHKSUM: Pointer to the verify_chksum function. * * This function verifies the checksum computed for the metadata is * the same as the checksum stored in the metadata. * * It computes the checksum based on the metadata stored in the * parameter "image_ptr" and the actual length of the metadata in the * parameter "len" which is obtained from the "get_load_size" callback. * * The typedef for the verify_chksum callback is as follows: * * typedef htri_t (*H5C_verify_chksum_func_t)(const void *image_ptr, * size_t len, * void *udata_ptr); * * The parameters of the verify_chksum callback are as follows: * * image_ptr: Pointer to a buffer containing the metadata read in. * * len: The actual length of the metadata. * * udata_ptr: Pointer to user data. * * * DESERIALIZE: Pointer to the deserialize function. * * This function must be able to deserialize a buffer containing the * on-disk image of a metadata cache entry, allocate and initialize the * equivalent in core representation, and return a pointer to that * representation. * * The typedef for the deserialize callback is as follows: * * typedef void *(*H5C_deserialize_func_t)(const void * image_ptr, * size_t len, * void * udata_ptr, * boolean * dirty_ptr); * * The parameters of the deserialize callback are as follows: * * image_ptr: Pointer to a buffer of length len containing the * contents of the file starting at addr and continuing * for len bytes. * * len: Length in bytes of the in file image to be deserialized. * * This parameter is supplied mainly for sanity checking. * Sanity checks should be performed when compiled in debug * mode, but the parameter may be unused when compiled in * production mode. * * udata_ptr: Pointer to user data provided in the protect call, which * must be passed through to the deserialize callback. * * dirty_ptr: Pointer to boolean which the deserialize function * must use to mark the entry dirty if it has to modify * the entry to clean up file corruption left over from * an old bug in the HDF5 library. * * Processing in the deserialize function should proceed as follows: * * If the image contains valid data, and is of the correct length, * the deserialize function must allocate space for an in-core * representation of that data, deserialize the contents of the image * into the space allocated for the in-core representation, and return * a pointer to the in core representation. Observe that an * instance of H5C_cache_entry_t must be the first item in this * representation. The cache will initialize it after the callback * returns. * * Note that the structure of the in-core representation is otherwise * up to the cache client. All that is required is that the pointer * returned be sufficient for the client's purposes when it is returned * on a protect call. * * If the deserialize function has to clean up file corruption * left over from an old bug in the HDF5 library, it must set * *dirty_ptr to TRUE. If it doesn't, no action is needed as * *dirty_ptr will be set to FALSE before the deserialize call. * * If the operation fails for any reason (i.e. bad data in buffer, bad * buffer length, malloc failure, etc.) the function must return NULL and * push error information on the error stack with the error API routines. * * * IMAGE_LEN: Pointer to the image length callback. * * The image_len callback is used to obtain the size of newly inserted * entries and assert verification. * * The typedef for the image_len callback is as follows: * * typedef herr_t (*H5C_image_len_func_t)(void *thing, * size_t *image_len_ptr); * * The parameters of the image_len callback are as follows: * * thing: Pointer to the in core representation of the entry. * * image_len_ptr: Pointer to size_t in which the callback will return * the length (in bytes) of the cache entry. * * Processing in the image_len function should proceed as follows: * * If successful, the function will place the length of the on disk * image associated with the in core representation provided in the * thing parameter in *image_len_ptr, and then return SUCCEED. * * If the function fails, it must return FAIL and push error information * onto the error stack with the error API routines, and return without * modifying the values pointed to by the image_len_ptr parameter. * * * PRE_SERIALIZE: Pointer to the pre-serialize callback. * * The pre-serialize callback is invoked by the metadata cache before * it needs a current on-disk image of the metadata entry for purposes * either constructing a journal or flushing the entry to disk. * * If the client needs to change the address or length of the entry prior * to flush, the pre-serialize callback is responsible for these actions, * so that the actual serialize callback (described below) is only * responsible for serializing the data structure, not moving it on disk * or resizing it. * * In addition, the client may use the pre-serialize callback to * ensure that the entry is ready to be flushed -- in particular, * if the entry contains references to other entries that are in * temporary file space, the pre-serialize callback must move those * entries into real file space so that the serialzed entry will * contain no invalid data. * * One would think that the base address and length of * the length of the entry's image on disk would be well known. * However, that need not be the case as free space section info * entries will change size (and possibly location) depending on the * number of blocks of free space being manages, and fractal heap * direct blocks can change compressed size (and possibly location) * on serialization if compression is enabled. Similarly, it may * be necessary to move entries from temporary to real file space. * * The pre-serialize callback must report any such changes to the * cache, which must then update its internal structures as needed. * * The typedef for the pre-serialize callback is as follows: * * typedef herr_t (*H5C_pre_serialize_func_t)(H5F_t *f, * void * thing, * haddr_t addr, * size_t len, * haddr_t * new_addr_ptr, * size_t * new_len_ptr, * unsigned * flags_ptr); * * The parameters of the pre-serialize callback are as follows: * * f: File pointer -- needed if other metadata cache entries * must be modified in the process of serializing the * target entry. * * thing: Pointer to void containing the address of the in core * representation of the target metadata cache entry. * This is the same pointer returned by a protect of the * addr and len given above. * * addr: Base address in file of the entry to be serialized. * * This parameter is supplied mainly for sanity checking. * Sanity checks should be performed when compiled in debug * mode, but the parameter may be unused when compiled in * production mode. * * len: Length in bytes of the in file image of the entry to be * serialized. Also the size the image passed to the * serialize callback (discussed below) unless that * value is altered by this function. * * This parameter is supplied mainly for sanity checking. * Sanity checks should be performed when compiled in debug * mode, but the parameter may be unused when compiled in * production mode. * * new_addr_ptr: Pointer to haddr_t. If the entry is moved by * the serialize function, the new on disk base address must * be stored in *new_addr_ptr, and the appropriate flag set * in *flags_ptr. * * If the entry is not moved by the serialize function, * *new_addr_ptr is undefined on pre-serialize callback * return. * * new_len_ptr: Pointer to size_t. If the entry is resized by the * serialize function, the new length of the on disk image * must be stored in *new_len_ptr, and the appropriate flag set * in *flags_ptr. * * If the entry is not resized by the pre-serialize function, * *new_len_ptr is undefined on pre-serialize callback * return. * * flags_ptr: Pointer to an unsigned integer used to return flags * indicating whether the preserialize function resized or moved * the entry. If the entry was neither resized or moved, the * serialize function must set *flags_ptr to zero. The * H5C__SERIALIZE_RESIZED_FLAG or H5C__SERIALIZE_MOVED_FLAG must * be set to indicate a resize or move respectively. * * If the H5C__SERIALIZE_RESIZED_FLAG is set, the new length * must be stored in *new_len_ptr. * * If the H5C__SERIALIZE_MOVED_FLAG flag is set, the * new image base address must be stored in *new_addr_ptr. * * Processing in the pre-serialize function should proceed as follows: * * The pre-serialize function must examine the in core representation * indicated by the thing parameter, if the pre-serialize function does * not need to change the size or location of the on-disk image, it must * set *flags_ptr to zero. * * If the size of the on-disk image must be changed, the pre-serialize * function must load the length of the new image into *new_len_ptr, and * set the H5C__SERIALIZE_RESIZED_FLAG in *flags_ptr. * * If the base address of the on disk image must be changed, the * pre-serialize function must set *new_addr_ptr to the new base address, * and set the H5C__SERIALIZE_MOVED_FLAG in *flags_ptr. * * In addition, the pre-serialize callback may perform any other * processing required before the entry is written to disk * * If it is successful, the function must return SUCCEED. * * If it fails for any reason, the function must return FAIL and * push error information on the error stack with the error API * routines. * * * SERIALIZE: Pointer to the serialize callback. * * The serialize callback is invoked by the metadata cache whenever * it needs a current on disk image of the metadata entry for purposes * either constructing a journal entry or flushing the entry to disk. * * At this point, the base address and length of the entry's image on * disk must be well known and not change during the serialization * process. * * While any size and/or location changes must have been handled * by a pre-serialize call, the client may elect to handle any other * changes to the entry required to place it in correct form for * writing to disk in this call. * * The typedef for the serialize callback is as follows: * * typedef herr_t (*H5C_serialize_func_t)(const H5F_t *f, * void * image_ptr, * size_t len, * void * thing); * * The parameters of the serialize callback are as follows: * * f: File pointer -- needed if other metadata cache entries * must be modified in the process of serializing the * target entry. * * image_ptr: Pointer to a buffer of length len bytes into which a * serialized image of the target metadata cache entry is * to be written. * * Note that this buffer will not in general be initialized * to any particular value. Thus the serialize function may * not assume any initial value and must set each byte in * the buffer. * * len: Length in bytes of the in file image of the entry to be * serialized. Also the size of *image_ptr (below). * * This parameter is supplied mainly for sanity checking. * Sanity checks should be performed when compiled in debug * mode, but the parameter may be unused when compiled in * production mode. * * thing: Pointer to void containing the address of the in core * representation of the target metadata cache entry. * This is the same pointer returned by a protect of the * addr and len given above. * * Processing in the serialize function should proceed as follows: * * If there are any remaining changes to the entry required before * write to disk, they must be dealt with first. * * The serialize function must then examine the in core * representation indicated by the thing parameter, and write a * serialized image of its contents into the provided buffer. * * If it is successful, the function must return SUCCEED. * * If it fails for any reason, the function must return FAIL and * push error information on the error stack with the error API * routines. * * * NOTIFY: Pointer to the notify callback. * * The notify callback is invoked by the metadata cache when a cache * action on an entry has taken/will take place and the client indicates * it wishes to be notified about the action. * * The typedef for the notify callback is as follows: * * typedef herr_t (*H5C_notify_func_t)(H5C_notify_action_t action, * void *thing); * * The parameters of the notify callback are as follows: * * action: An enum indicating the metadata cache action that has taken/ * will take place. * * thing: Pointer to void containing the address of the in core * representation of the target metadata cache entry. This * is the same pointer that would be returned by a protect * of the addr and len of the entry. * * Processing in the notify function should proceed as follows: * * The notify function may perform any action it would like, including * metadata cache calls. * * If the function is successful, it must return SUCCEED. * * If it fails for any reason, the function must return FAIL and * push error information on the error stack with the error API * routines. * * * FREE_ICR: Pointer to the free ICR callback. * * The free ICR callback is invoked by the metadata cache when it * wishes to evict an entry, and needs the client to free the memory * allocated for the in core representation. * * The typedef for the free ICR callback is as follows: * * typedef herr_t (*H5C_free_icr_func_t)(void * thing)); * * The parameters of the free ICR callback are as follows: * * thing: Pointer to void containing the address of the in core * representation of the target metadata cache entry. This * is the same pointer that would be returned by a protect * of the addr and len of the entry. * * Processing in the free ICR function should proceed as follows: * * The free ICR function must free all memory allocated to the * in core representation. * * If the function is successful, it must return SUCCEED. * * If it fails for any reason, the function must return FAIL and * push error information on the error stack with the error API * routines. * * At least when compiled with debug, it would be useful if the * free ICR call would fail if the in core representation has been * modified since the last serialize callback. * * GET_FSF_SIZE: Pointer to the get file space free size callback. * * In principle, there is no need for the get file space free size * callback. However, as an optimization, it is sometimes convenient * to allocate and free file space for a number of cache entries * simultaneously in a single contiguous block of file space. * * File space allocation is done by the client, so the metadata cache * need not be involved. However, since the metadata cache typically * handles file space release when an entry is destroyed, some * adjustment on the part of the metadata cache is required for this * operation. * * The get file space free size callback exists to support this * operation. * * If a group of cache entries that were allocated as a group are to * be discarded and their file space released, the type of the first * (i.e. lowest address) entry in the group must implement the * get free file space size callback. * * To free the file space of all entries in the group in a single * operation, first expunge all entries other than the first without * the free file space flag. * * Then, to complete the operation, unprotect or expunge the first * entry in the block with the free file space flag set. Since * the get free file space callback is implemented, the metadata * cache will use this callback to get the size of the block to be * freed, instead of using the size of the entry as is done otherwise. * * At present this callback is used only by the H5FA and H5EA dblock * and dblock page client classes. * * The typedef for the get_fsf_size callback is as follows: * * typedef herr_t (*H5C_get_fsf_size_t)(const void * thing, * hsize_t *fsf_size_ptr); * * The parameters of the get_fsf_size callback are as follows: * * thing: Pointer to void containing the address of the in core * representation of the target metadata cache entry. This * is the same pointer that would be returned by a protect() * call of the associated addr and len. * * fs_size_ptr: Pointer to hsize_t in which the callback will return * the size of the piece of file space to be freed. Note * that the space to be freed is presumed to have the same * base address as the cache entry. * * The function simply returns the size of the block of file space * to be freed in *fsf_size_ptr. * * If the function is successful, it must return SUCCEED. * * If it fails for any reason, the function must return FAIL and * push error information on the error stack with the error API * routines. * ***************************************************************************/ /* Actions that can be reported to 'notify' client callback */ typedef enum H5C_notify_action_t { H5C_NOTIFY_ACTION_AFTER_INSERT, /* Entry has been added to the cache * via the insert call */ H5C_NOTIFY_ACTION_AFTER_LOAD, /* Entry has been loaded into the * from file via the protect call */ H5C_NOTIFY_ACTION_AFTER_FLUSH, /* Entry has just been flushed to * file. */ H5C_NOTIFY_ACTION_BEFORE_EVICT, /* Entry is about to be evicted * from cache. */ H5C_NOTIFY_ACTION_ENTRY_DIRTIED, /* Entry has been marked dirty. */ H5C_NOTIFY_ACTION_ENTRY_CLEANED, /* Entry has been marked clean. */ H5C_NOTIFY_ACTION_CHILD_DIRTIED, /* Dependent child has been marked dirty. */ H5C_NOTIFY_ACTION_CHILD_CLEANED, /* Dependent child has been marked clean. */ H5C_NOTIFY_ACTION_CHILD_UNSERIALIZED, /* Dependent child has been marked unserialized. */ H5C_NOTIFY_ACTION_CHILD_SERIALIZED /* Dependent child has been marked serialized. */ } H5C_notify_action_t; /* Cache client callback function pointers */ typedef herr_t (*H5C_get_initial_load_size_func_t)(void *udata_ptr, size_t *image_len_ptr); typedef herr_t (*H5C_get_final_load_size_func_t)(const void *image_ptr, size_t image_len, void *udata_ptr, size_t *actual_len_ptr); typedef htri_t (*H5C_verify_chksum_func_t)(const void *image_ptr, size_t len, void *udata_ptr); typedef void *(*H5C_deserialize_func_t)(const void *image_ptr, size_t len, void *udata_ptr, hbool_t *dirty_ptr); typedef herr_t (*H5C_image_len_func_t)(const void *thing, size_t *image_len_ptr); typedef herr_t (*H5C_pre_serialize_func_t)(H5F_t *f, void *thing, haddr_t addr, size_t len, haddr_t *new_addr_ptr, size_t *new_len_ptr, unsigned *flags_ptr); typedef herr_t (*H5C_serialize_func_t)(const H5F_t *f, void *image_ptr, size_t len, void *thing); typedef herr_t (*H5C_notify_func_t)(H5C_notify_action_t action, void *thing); typedef herr_t (*H5C_free_icr_func_t)(void *thing); typedef herr_t (*H5C_get_fsf_size_t)(const void * thing, hsize_t *fsf_size_ptr); /* Metadata cache client class definition */ typedef struct H5C_class_t { int id; const char * name; H5FD_mem_t mem_type; unsigned flags; H5C_get_initial_load_size_func_t get_initial_load_size; H5C_get_final_load_size_func_t get_final_load_size; H5C_verify_chksum_func_t verify_chksum; H5C_deserialize_func_t deserialize; H5C_image_len_func_t image_len; H5C_pre_serialize_func_t pre_serialize; H5C_serialize_func_t serialize; H5C_notify_func_t notify; H5C_free_icr_func_t free_icr; H5C_get_fsf_size_t fsf_size; } H5C_class_t; /* Type definitions of callback functions used by the cache as a whole */ typedef herr_t (*H5C_write_permitted_func_t)(const H5F_t *f, hbool_t *write_permitted_ptr); typedef herr_t (*H5C_log_flush_func_t)(H5C_t *cache_ptr, haddr_t addr, hbool_t was_dirty, unsigned flags); /**************************************************************************** * * H5C_ring_t & associated #defines * * The metadata cache uses the concept of rings to order the flushes of * classes of entries. In this arrangement, each entry in the cache is * assigned to a ring, and on flush, the members of the outermost ring * are flushed first, followed by the next outermost, and so on with the * members of the innermost ring being flushed last. * * Note that flush dependencies are used to order flushes within rings. * * Note also that at the conceptual level, rings are argueably superfluous, * as a similar effect could be obtained via the flush dependency mechanism. * However, this would require all entries in the cache to participate in a * flush dependency -- with the implied setup and takedown overhead and * added complexity. Further, the flush ordering between rings need only * be enforced on flush operations, and thus the use of flush dependencies * instead would apply unnecessary constraints on flushes under normal * operating circumstances. * * As of this writing, all metadata entries pretaining to data sets and * groups must be flushed first, and are thus assigned to the outermost * ring. * * Free space managers managing file space must be flushed next, * and are assigned to the second and third outermost rings. Two rings * are used here as the raw data free space manager must be flushed before * the metadata free space manager. * * The object header and associated chunks used to implement superblock * extension messages must be flushed next, and are thus assigned to * the fourth outermost ring. * * The superblock proper must be flushed last, and is thus assigned to * the innermost ring. * * The H5C_ring_t and the associated #defines below are used to define * the rings. Each entry must be assigned to the appropriate ring on * insertion or protect. * * Note that H5C_ring_t was originally an enumerated type. It was * converted to an integer and a set of #defines for convenience in * debugging. */ #define H5C_RING_UNDEFINED 0 /* shouldn't appear in the cache */ #define H5C_RING_USER 1 /* outermost ring */ #define H5C_RING_RDFSM 2 #define H5C_RING_MDFSM 3 #define H5C_RING_SBE 4 #define H5C_RING_SB 5 /* innermost ring */ #define H5C_RING_NTYPES 6 typedef int H5C_ring_t; /**************************************************************************** * * structure H5C_cache_entry_t * * Instances of the H5C_cache_entry_t structure are used to store cache * entries in a hash table and sometimes in a skip list. * See H5SL.c for the particulars of the skip list. * * In typical application, this structure is the first field in a * structure to be cached. For historical reasons, the external module * is responsible for managing the is_dirty field (this is no longer * completely true. See the comment on the is_dirty field for details). * All other fields are managed by the cache. * * The fields of this structure are discussed individually below: * * JRM - 4/26/04 * * magic: Unsigned 32 bit integer that must always be set to * H5C__H5C_CACHE_ENTRY_T_MAGIC when the entry is valid. * The field must be set to H5C__H5C_CACHE_ENTRY_T_BAD_MAGIC * just before the entry is freed. * * This is necessary, as the LRU list can be changed out * from under H5C__make_space_in_cache() by the serialize * callback which may change the size of an existing entry, * and/or load a new entry while serializing the target entry. * * This in turn can cause a recursive call to * H5C__make_space_in_cache() which may either flush or evict * the next entry that the first invocation of that function * was about to examine. * * The magic field allows H5C__make_space_in_cache() to * detect this case, and re-start its scan from the bottom * of the LRU when this situation occurs. * * cache_ptr: Pointer to the cache that this entry is contained within. * * addr: Base address of the cache entry on disk. * * size: Length of the cache entry on disk in bytes Note that unlike * normal caches, the entries in this cache are of arbitrary size. * * The file space allocations for cache entries implied by the * addr and size fields must be disjoint. * * image_ptr: Pointer to void. When not NULL, this field points to a * dynamically allocated block of size bytes in which the * on disk image of the metadata cache entry is stored. * * If the entry is dirty, the pre-serialize and serialize * callbacks must be used to update this image before it is * written to disk * * image_up_to_date: Boolean flag that is set to TRUE when *image_ptr * is up to date, and set to false when the entry is dirtied. * * type: Pointer to the instance of H5C_class_t containing pointers * to the methods for cache entries of the current type. This * field should be NULL when the instance of H5C_cache_entry_t * is not in use. * * The name is not particularly descriptive, but is retained * to avoid changes in existing code. * * is_dirty: Boolean flag indicating whether the contents of the cache * entry has been modified since the last time it was written * to disk. * * dirtied: Boolean flag used to indicate that the entry has been * dirtied while protected. * * This field is set to FALSE in the protect call, and may * be set to TRUE by the H5C_mark_entry_dirty() call at any * time prior to the unprotect call. * * The H5C_mark_entry_dirty() call exists as a convenience * function for the fractal heap code which may not know if * an entry is protected or pinned, but knows that is either * protected or pinned. The dirtied field was added as in * the parallel case, it is necessary to know whether a * protected entry is dirty prior to the protect call. * * is_protected: Boolean flag indicating whether this entry is protected * (or locked, to use more conventional terms). When it is * protected, the entry cannot be flushed or accessed until * it is unprotected (or unlocked -- again to use more * conventional terms). * * Note that protected entries are removed from the LRU lists * and inserted on the protected list. * * is_read_only: Boolean flag that is only meaningful if is_protected is * TRUE. In this circumstance, it indicates whether the * entry has been protected read-only, or read/write. * * If the entry has been protected read-only (i.e. is_protected * and is_read_only are both TRUE), we allow the entry to be * protected more than once. * * In this case, the number of readers is maintained in the * ro_ref_count field (see below), and unprotect calls simply * decrement that field until it drops to zero, at which point * the entry is actually unprotected. * * ro_ref_count: Integer field used to maintain a count of the number of * outstanding read-only protects on this entry. This field * must be zero whenever either is_protected or is_read_only * are TRUE. * * is_pinned: Boolean flag indicating whether the entry has been pinned * in the cache. * * For very hot entries, the protect / unprotect overhead * can become excessive. Thus the cache has been extended * to allow an entry to be "pinned" in the cache. * * Pinning an entry in the cache has several implications: * * 1) A pinned entry cannot be evicted. Thus unprotected * pinned entries must be stored in the pinned entry * list, instead of being managed by the replacement * policy code (LRU at present). * * 2) A pinned entry can be accessed or modified at any time. * This places an extra burden on the pre-serialize and * serialize callbacks, which must ensure that a pinned * entry is consistent and ready to write to disk before * generating an image. * * 3) A pinned entry can be marked as dirty (and possibly * change size) while it is unprotected. * * 4) The flush-destroy code must allow pinned entries to * be unpinned (and possibly unprotected) during the * flush. * * JRM -- 3/16/06 * * in_slist: Boolean flag indicating whether the entry is in the skip list * As a general rule, entries are placed in the list when they * are marked dirty. However they may remain in the list after * being flushed. * * Update: Dirty entries are now removed from the skip list * when they are flushed. * * flush_marker: Boolean flag indicating that the entry is to be flushed * the next time H5C_flush_cache() is called with the * H5C__FLUSH_MARKED_ENTRIES_FLAG. The flag is reset when * the entry is flushed for whatever reason. * * flush_me_last: Boolean flag indicating that this entry should not be * flushed from the cache until all other entries without * the flush_me_last flag set have been flushed. * * Note: * * At this time, the flush_me_last * flag will only be applied to one entry, the superblock, * and the code utilizing these flags is protected with HDasserts * to enforce this. This restraint can certainly be relaxed in * the future if the the need for multiple entries getting flushed * last or collectively arises, though the code allowing for that * will need to be expanded and tested appropriately if that * functionality is desired. * * Update: There are now two possible last entries * (superblock and file driver info message). This * number will probably increase as we add superblock * messages. JRM -- 11/18/14 * * clear_on_unprotect: Boolean flag used only in PHDF5. When H5C is used * to implement the metadata cache In the parallel case, only * the cache with mpi rank 0 is allowed to actually write to * file -- all other caches must retain dirty entries until they * are advised that the entry is clean. * * This flag is used in the case that such an advisory is * received when the entry is protected. If it is set when an * entry is unprotected, and the dirtied flag is not set in * the unprotect, the entry's is_dirty flag is reset by flushing * it with the H5C__FLUSH_CLEAR_ONLY_FLAG. * * flush_immediately: Boolean flag used only in Phdf5 -- and then only * for H5AC_METADATA_WRITE_STRATEGY__DISTRIBUTED. * * When a distributed metadata write is triggered at a * sync point, this field is used to mark entries that * must be flushed before leaving the sync point. At all * other times, this field should be set to FALSE. * * flush_in_progress: Boolean flag that is set to true iff the entry * is in the process of being flushed. This allows the cache * to detect when a call is the result of a flush callback. * * destroy_in_progress: Boolean flag that is set to true iff the entry * is in the process of being flushed and destroyed. * * * Fields supporting rings for flush ordering: * * All entries in the metadata cache are assigned to a ring. On cache * flush, all entries in the outermost ring are flushed first, followed * by all members of the next outermost ring, and so on until the * innermost ring is flushed. Note that this ordering is ONLY applied * in flush and serialize calls. Rings are ignored during normal operations * in which entries are flushed as directed by the replacement policy. * * See the header comment on H5C_ring_t above for further details. * * Note that flush dependencies (see below) are used to order flushes * within rings. Unlike rings, flush dependencies are applied to ALL * writes, not just those triggered by flush or serialize calls. * * ring: Instance of H5C_ring_t indicating the ring to which this * entry is assigned. * * * Fields supporting the 'flush dependency' feature: * * Entries in the cache may have 'flush dependencies' on other entries in the * cache. A flush dependency requires that all dirty child entries be flushed * to the file before a dirty parent entry (of those child entries) can be * flushed to the file. This can be used by cache clients to create data * structures that allow Single-Writer/Multiple-Reader (SWMR) access for the * data structure. * * flush_dep_parent: Pointer to the array of flush dependency parent entries * for this entry. * * flush_dep_nparents: Number of flush dependency parent entries for this * entry, i.e. the number of valid elements in flush_dep_parent. * * flush_dep_parent_nalloc: The number of allocated elements in * flush_dep_parent_nalloc. * * flush_dep_nchildren: Number of flush dependency children for this entry. If * this field is nonzero, then this entry must be pinned and * therefore cannot be evicted. * * flush_dep_ndirty_children: Number of flush dependency children that are * either dirty or have a nonzero flush_dep_ndirty_children. If * this field is nonzero, then this entry cannot be flushed. * * flush_dep_nunser_children: Number of flush dependency children * that are either unserialized, or have a non-zero number of * positive number of unserialized children. * * Note that since there is no requirement that a clean entry * be serialized, it is possible that flush_dep_nunser_children * to be greater than flush_dep_ndirty_children. * * This field exist to facilitate correct ordering of entry * serializations when it is necessary to serialize all the * entries in the metadata cache. Thus in the cache * serialization, no entry can be serialized unless this * field contains 0. * * Fields supporting the hash table: * * Entries in the cache are indexed by a more or less conventional hash table. * If there are multiple entries in any hash bin, they are stored in a doubly * linked list. * * Addendum: JRM -- 10/14/15 * * We have come to scan all entries in the cache frequently enough that * the cost of doing so by scanning the hash table has become unacceptable. * To reduce this cost, the index now also maintains a doubly linked list * of all entries in the index. This list is known as the index list. * The il_next and il_prev fields discussed below were added to support * the index list. * * ht_next: Next pointer used by the hash table to store multiple * entries in a single hash bin. This field points to the * next entry in the doubly linked list of entries in the * hash bin, or NULL if there is no next entry. * * ht_prev: Prev pointer used by the hash table to store multiple * entries in a single hash bin. This field points to the * previous entry in the doubly linked list of entries in * the hash bin, or NULL if there is no previuos entry. * * il_next: Next pointer used by the index to maintain a doubly linked * list of all entries in the index (and thus in the cache). * This field contains a pointer to the next entry in the * index list, or NULL if there is no next entry. * * il_prev: Prev pointer used by the index to maintain a doubly linked * list of all entries in the index (and thus in the cache). * This field contains a pointer to the previous entry in the * index list, or NULL if there is no previous entry. * * * Fields supporting replacement policies: * * The cache must have a replacement policy, and it will usually be * necessary for this structure to contain fields supporting that policy. * * While there has been interest in several replacement policies for * this cache, the initial development schedule is tight. Thus I have * elected to support only a modified LRU policy for the first cut. * * When additional replacement policies are added, the fields in this * section will be used in different ways or not at all. Thus the * documentation of these fields is repeated for each replacement policy. * * Modified LRU: * * When operating in parallel mode, we must ensure that a read does not * cause a write. If it does, the process will hang, as the write will * be collective and the other processes will not know to participate. * * To deal with this issue, I have modified the usual LRU policy by adding * clean and dirty LRU lists to the usual LRU list. When reading in * parallel mode, we evict from the clean LRU list only. This implies * that we must try to ensure that the clean LRU list is reasonably well * stocked. See the comments on H5C_t in H5Cpkg.h for more details. * * Note that even if we start with a completely clean cache, a sequence * of protects without unprotects can empty the clean LRU list. In this * case, the cache must grow temporarily. At the next write, we will * attempt to evict enough entries to get the cache down to its nominal * maximum size. * * The use of the replacement policy fields under the Modified LRU policy * is discussed below: * * next: Next pointer in either the LRU, the protected list, or * the pinned list depending on the current values of * is_protected and is_pinned. If there is no next entry * on the list, this field should be set to NULL. * * prev: Prev pointer in either the LRU, the protected list, * or the pinned list depending on the current values of * is_protected and is_pinned. If there is no previous * entry on the list, this field should be set to NULL. * * aux_next: Next pointer on either the clean or dirty LRU lists. * This entry should be NULL when either is_protected or * is_pinned is true. * * When is_protected and is_pinned are false, and is_dirty is * true, it should point to the next item on the dirty LRU * list. * * When is_protected and is_pinned are false, and is_dirty is * false, it should point to the next item on the clean LRU * list. In either case, when there is no next item, it * should be NULL. * * aux_prev: Previous pointer on either the clean or dirty LRU lists. * This entry should be NULL when either is_protected or * is_pinned is true. * * When is_protected and is_pinned are false, and is_dirty is * true, it should point to the previous item on the dirty * LRU list. * * When is_protected and is_pinned are false, and is_dirty * is false, it should point to the previous item on the * clean LRU list. * * In either case, when there is no previous item, it should * be NULL. * * Fields supporting the cache image feature: * * The following fields are used to store data about the entry which must * be stored in the cache image block, but which will typically be either * lost or heavily altered in the process of serializing the cache and * preparing its contents to be copied into the cache image block. * * Some fields are also used in loading the contents of the metadata cache * image back into the cache, and in managing such entries until they are * either protected by the library (at which point they become regular * entries) or are evicted. See discussion of the prefetched field for * further details. * * include_in_image: Boolean flag indicating whether this entry should * be included in the metadata cache image. This field should * always be false prior to the H5C_prep_for_file_close() call. * During that call, it should be set to TRUE for all entries * that are to be included in the metadata cache image. At * present, only the superblock, the superblock extension * object header and its chunks (if any) are omitted from * the image. * * lru_rank: Rank of the entry in the LRU just prior to file close. * * Note that the first entry on the LRU has lru_rank 1, * and that entries not on the LRU at that time will have * either lru_rank -1 (if pinned) or 0 (if loaded during * the process of flushing the cache. * * image_dirty: Boolean flag indicating whether the entry should be marked * as dirty in the metadata cache image. The flag is set to * TRUE iff the entry is dirty when H5C_prep_for_file_close() * is called. * * fd_parent_count: If the entry is a child in one or more flush dependency * relationships, this field contains the number of flush * dependency parents. * * In all other cases, the field is set to zero. * * Note that while this count is initially taken from the * flush dependency fields above, if the entry is in the * cache image (i.e. include_in_image is TRUE), any parents * that are not in the image are removed from this count and * from the fd_parent_addrs array below. * * Finally observe that if the entry is dirty and in the * cache image, and its parent is dirty and not in the cache * image, then the entry must be removed from the cache image * to avoid violating the flush dependency flush ordering. * * fd_parent_addrs: If the entry is a child in one or more flush dependency * relationship when H5C_prep_for_file_close() is called, this * field must contain a pointer to an array of size * fd_parent_count containing the on disk addresses of the * parent. * * In all other cases, the field is set to NULL. * * Note that while this list of addresses is initially taken * from the flush dependency fields above, if the entry is in the * cache image (i.e. include_in_image is TRUE), any parents * that are not in the image are removed from this list, and * and from the fd_parent_count above. * * Finally observe that if the entry is dirty and in the * cache image, and its parent is dirty and not in the cache * image, then the entry must be removed from the cache image * to avoid violating the flush dependency flush ordering. * * fd_child_count: If the entry is a parent in a flush dependency * relationship, this field contains the number of flush * dependency children. * * In all other cases, the field is set to zero. * * Note that while this count is initially taken from the * flush dependency fields above, if the entry is in the * cache image (i.e. include_in_image is TRUE), any children * that are not in the image are removed from this count. * * fd_dirty_child_count: If the entry is a parent in a flush dependency * relationship, this field contains the number of dirty flush * dependency children. * * In all other cases, the field is set to zero. * * Note that while this count is initially taken from the * flush dependency fields above, if the entry is in the * cache image (i.e. include_in_image is TRUE), any dirty * children that are not in the image are removed from this * count. * * image_fd_height: Flush dependency height of the entry in the cache image. * * The flush dependency height of any entry involved in a * flush dependency relationship is defined to be the * longest flush dependency path from that entry to an entry * with no flush dependency children. * * Since the image_fd_height is used to order entries in the * cache image so that fd parents preceed fd children, for * purposes of this field, and entry is at flush dependency * level 0 if it either has no children, or if all of its * children are not in the cache image. * * Note that if a child in a flush dependency relationship is * dirty and in the cache image, and its parent is dirty and * not in the cache image, then the child must be excluded * from the cache image to maintain flush ordering. * * prefetched: Boolean flag indicating that the on disk image of the entry * has been loaded into the cache prior any request for the * entry by the rest of the library. * * As of this writing (8/10/15), this can only happen through * the load of a cache image block, although other scenarios * are contemplated for the use of this feature. Note that * unlike the usual prefetch situation, this means that a * prefetched entry can be dirty, and/or can be a party to * flush dependency relationship(s). This complicates matters * somewhat. * * The essential feature of a prefetched entry is that it * consists only of a buffer containing the on disk image of * the entry. Thus it must be deserialized before it can * be passed back to the library on a protect call. This * task is handled by H5C_deserialized_prefetched_entry(). * In essence, this routine calls the deserialize callback * provided in the protect call with the on disk image, * deletes the prefetched entry from the cache, and replaces * it with the deserialized entry returned by the deserialize * callback. * * Further, if the prefetched entry is a flush dependency parent, * all its flush dependency children (which must also be * prefetched entries), must be transferred to the new cache * entry returned by the deserialization callback. * * Finally, if the prefetched entry is a flush dependency child, * this flush dependency must be destroyed prior to the * deserialize call. * * In addition to the above special processing on the first * protect call on a prefetched entry (after which is no longer * a prefetched entry), prefetched entries also require special * tretment on flush and evict. * * On flush, a dirty prefetched entry must simply be written * to disk and marked clean without any call to any client * callback. * * On eviction, if a prefetched entry is a flush dependency * child, that flush dependency relationship must be destroyed * just prior to the eviction. If the flush dependency code * is working properly, it should be impossible for any entry * that is a flush dependency parent to be evicted. * * prefetch_type_id: Integer field containing the type ID of the prefetched * entry. This ID must match the ID of the type provided in any * protect call on the prefetched entry. * * The value of this field is undefined in prefetched is FALSE. * * age: Number of times a prefetched entry has appeared in * subsequent cache images. The field exists to allow * imposition of a limit on how many times a prefetched * entry can appear in subsequent cache images without being * converted to a regular entry. * * This field must be zero if prefetched is FALSE. * * prefetched_dirty: Boolean field that must be set to FALSE unless the * following conditions hold: * * 1) The file has been opened R/O. * * 2) The entry is either a prefetched entry, or was * re-constructed from a prefetched entry. * * 3) The base prefetched entry was marked dirty. * * This field exists to solve the following problem with * files containing cache images that are opened R/O. * * If the cache image contains a dirty entry, that entry * must be marked clean when it is inserted into the cache * in the read-only case, as otherwise the metadata cache * will attempt to flush it on file close -- which is poor * form in the read-only case. * * However, since the entry is marked clean, it is possible * that the metadata cache will evict it if the size of the * metadata in the file exceeds the size of the metadata cache, * and the application visits much of this data. * * If this happens, and the metadata cache is then asked for * this entry, it will attempt to read it from file, and will * obtain either obsolete or invalid data depending on whether * the entry has ever been written to it assigned location in * the file. * * With this background, the purpose of this field should be * obvious -- when set, it allows the eviction candidate * selection code to skip over the entry, thus avoiding the * issue. * * Since the issue only arises in the R/O case, there is * no possible interaction with SWMR. There are also * potential interactions with Evict On Close -- at present, * we deal with this by disabling EOC in the R/O case. * * serialization_count: Integer field used to maintain a count of the * number of times each entry is serialized during cache * serialization. While no entry should be serialized more than * once in any serialization call, throw an assertion if any * flush depencency parent is serialized more than once during * a single cache serialization. * * This is a debugging field, and thus is maintained only if * NDEBUG is undefined. * * Fields supporting tagged entries: * * Entries in the cache that belong to a single object in the file are * joined into a doubly-linked list, and are "tagged" with the object header * address for that object's base header "chunk" (which is used as the * canonical address for the object). Global and shared entries are * not tagged. Tagged entries have a pointer to the tag info for the object, * which is shared state for all the entries for that object. * * tl_next: Pointer to the next entry in the tag list for an object. * NULL for the tail entry in the list, as well as untagged * entries. * * tl_prev: Pointer to the previous entry in the tag list for an object. * NULL for the head entry in the list, as well as untagged * entries. * * tag_info: Pointer to the common tag state for all entries belonging to * an object. NULL for untagged entries. * * * Cache entry stats collection fields: * * These fields should only be compiled in when both H5C_COLLECT_CACHE_STATS * and H5C_COLLECT_CACHE_ENTRY_STATS are true. When present, they allow * collection of statistics on individual cache entries. * * accesses: int32_t containing the number of times this cache entry has * been referenced in its lifetime. * * clears: int32_t containing the number of times this cache entry has * been cleared in its life time. * * flushes: int32_t containing the number of times this cache entry has * been flushed to file in its life time. * * pins: int32_t containing the number of times this cache entry has * been pinned in cache in its life time. * ****************************************************************************/ typedef struct H5C_cache_entry_t { uint32_t magic; H5C_t *cache_ptr; haddr_t addr; size_t size; void *image_ptr; hbool_t image_up_to_date; const H5C_class_t *type; hbool_t is_dirty; hbool_t dirtied; hbool_t is_protected; hbool_t is_read_only; int ro_ref_count; hbool_t is_pinned; hbool_t in_slist; hbool_t flush_marker; hbool_t flush_me_last; #ifdef H5_HAVE_PARALLEL hbool_t clear_on_unprotect; hbool_t flush_immediately; hbool_t coll_access; #endif /* H5_HAVE_PARALLEL */ hbool_t flush_in_progress; hbool_t destroy_in_progress; /* fields supporting rings for purposes of flush ordering */ H5C_ring_t ring; /* fields supporting the 'flush dependency' feature: */ struct H5C_cache_entry_t ** flush_dep_parent; unsigned flush_dep_nparents; unsigned flush_dep_parent_nalloc; unsigned flush_dep_nchildren; unsigned flush_dep_ndirty_children; unsigned flush_dep_nunser_children; hbool_t pinned_from_client; hbool_t pinned_from_cache; /* fields supporting the hash table: */ struct H5C_cache_entry_t *ht_next; struct H5C_cache_entry_t *ht_prev; struct H5C_cache_entry_t *il_next; struct H5C_cache_entry_t *il_prev; /* fields supporting replacement policies: */ struct H5C_cache_entry_t *next; struct H5C_cache_entry_t *prev; #if H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS struct H5C_cache_entry_t *aux_next; struct H5C_cache_entry_t *aux_prev; #endif /* H5C_MAINTAIN_CLEAN_AND_DIRTY_LRU_LISTS */ #ifdef H5_HAVE_PARALLEL struct H5C_cache_entry_t *coll_next; struct H5C_cache_entry_t *coll_prev; #endif /* H5_HAVE_PARALLEL */ /* fields supporting cache image */ hbool_t include_in_image; int32_t lru_rank; hbool_t image_dirty; uint64_t fd_parent_count; haddr_t *fd_parent_addrs; uint64_t fd_child_count; uint64_t fd_dirty_child_count; uint32_t image_fd_height; hbool_t prefetched; int prefetch_type_id; int32_t age; hbool_t prefetched_dirty; #ifndef NDEBUG /* debugging field */ int serialization_count; #endif /* NDEBUG */ /* fields supporting tag lists */ struct H5C_cache_entry_t *tl_next; struct H5C_cache_entry_t *tl_prev; struct H5C_tag_info_t *tag_info; #if H5C_COLLECT_CACHE_ENTRY_STATS /* cache entry stats fields */ int32_t accesses; int32_t clears; int32_t flushes; int32_t pins; #endif /* H5C_COLLECT_CACHE_ENTRY_STATS */ } H5C_cache_entry_t; /**************************************************************************** * * structure H5C_image_entry_t * * Instances of the H5C_image_entry_t structure are used to store data on * metadata cache entries used in the construction of the metadata cache * image block. In essence this structure is a greatly simplified version * of H5C_cache_entry_t. * * The fields of this structure are discussed individually below: * * JRM - 8/5/15 * * magic: Unsigned 32 bit integer that must always be set to * H5C_IMAGE_ENTRY_T_MAGIC when the entry is valid. * The field must be set to H5C_IMAGE_ENTRY_T_BAD_MAGIC * just before the entry is freed. * * addr: Base address of the cache entry on disk. * * size: Length of the cache entry on disk in bytes. * * ring: Instance of H5C_ring_t indicating the flush ordering ring * to which this entry is assigned. * * age: Number of times this prefetech entry has appeared in * the current sequence of cache images. This field is * initialized to 0 if the instance of H5C_image_entry_t * is constructed from a regular entry. * * If the instance is constructed from a prefetched entry * currently residing in the metadata cache, the field is * set to 1 + the age of the prefetched entry, or to * H5AC__CACHE_IMAGE__ENTRY_AGEOUT__MAX if that sum exceeds * H5AC__CACHE_IMAGE__ENTRY_AGEOUT__MAX. * * type_id: Integer field containing the type ID of the entry. * * lru_rank: Rank of the entry in the LRU just prior to file close. * * Note that the first entry on the LRU has lru_rank 1, * and that entries not on the LRU at that time will have * either lru_rank -1 (if pinned) or 0 (if loaded during * the process of flushing the cache. * * is_dirty: Boolean flag indicating whether the contents of the cache * entry has been modified since the last time it was written * to disk as a regular piece of metadata. * * image_fd_height: Flush dependency height of the entry in the cache image. * * The flush dependency height of any entry involved in a * flush dependency relationship is defined to be the * longest flush dependency path from that entry to an entry * with no flush dependency children. * * Since the image_fd_height is used to order entries in the * cache image so that fd parents preceed fd children, for * purposes of this field, an entry is at flush dependency * level 0 if it either has no children, or if all of its * children are not in the cache image. * * Note that if a child in a flush dependency relationship is * dirty and in the cache image, and its parent is dirty and * not in the cache image, then the child must be excluded * from the cache image to maintain flush ordering. * * fd_parent_count: If the entry is a child in one or more flush dependency * relationships, this field contains the number of flush * dependency parents. * * In all other cases, the field is set to zero. * * Note that while this count is initially taken from the * flush dependency fields in the associated instance of * H5C_cache_entry_t, if the entry is in the cache image * (i.e. include_in_image is TRUE), any parents that are * not in the image are removed from this count and * from the fd_parent_addrs array below. * * Finally observe that if the entry is dirty and in the * cache image, and its parent is dirty and not in the cache * image, then the entry must be removed from the cache image * to avoid violating the flush dependency flush ordering. * This should have happened before the construction of * the instance of H5C_image_entry_t. * * fd_parent_addrs: If the entry is a child in one or more flush dependency * relationship when H5C_prep_for_file_close() is called, this * field must contain a pointer to an array of size * fd_parent_count containing the on disk addresses of the * parents. * * In all other cases, the field is set to NULL. * * Note that while this list of addresses is initially taken * from the flush dependency fields in the associated instance of * H5C_cache_entry_t, if the entry is in the cache image * (i.e. include_in_image is TRUE), any parents that are not * in the image are removed from this list, and from the * fd_parent_count above. * * Finally observe that if the entry is dirty and in the * cache image, and its parent is dirty and not in the cache * image, then the entry must be removed from the cache image * to avoid violating the flush dependency flush ordering. * This should have happened before the construction of * the instance of H5C_image_entry_t. * * fd_child_count: If the entry is a parent in a flush dependency * relationship, this field contains the number of flush * dependency children. * * In all other cases, the field is set to zero. * * Note that while this count is initially taken from the * flush dependency fields in the associated instance of * H5C_cache_entry_t, if the entry is in the cache image * (i.e. include_in_image is TRUE), any children * that are not in the image are removed from this count. * * fd_dirty_child_count: If the entry is a parent in a flush dependency * relationship, this field contains the number of dirty flush * dependency children. * * In all other cases, the field is set to zero. * * Note that while this count is initially taken from the * flush dependency fields in the associated instance of * H5C_cache_entry_t, if the entry is in the cache image * (i.e. include_in_image is TRUE), any dirty children * that are not in the image are removed from this count. * * image_ptr: Pointer to void. When not NULL, this field points to a * dynamically allocated block of size bytes in which the * on disk image of the metadata cache entry is stored. * * If the entry is dirty, the pre-serialize and serialize * callbacks must be used to update this image before it is * written to disk * * ****************************************************************************/ typedef struct H5C_image_entry_t { uint32_t magic; haddr_t addr; size_t size; H5C_ring_t ring; int32_t age; int32_t type_id; int32_t lru_rank; hbool_t is_dirty; unsigned image_fd_height; uint64_t fd_parent_count; haddr_t *fd_parent_addrs; uint64_t fd_child_count; uint64_t fd_dirty_child_count; void *image_ptr; } H5C_image_entry_t; /**************************************************************************** * * structure H5C_auto_size_ctl_t * * Instances of H5C_auto_size_ctl_t are used to get and set the control * fields for automatic cache re-sizing. * * The fields of the structure are discussed individually below: * * version: Integer field containing the version number of this version * of the H5C_auto_size_ctl_t structure. Any instance of * H5C_auto_size_ctl_t passed to the cache must have a known * version number, or an error will be flagged. * * report_fcn: Pointer to the function that is to be called to report * activities each time the auto cache resize code is executed. If the * field is NULL, no call is made. * * If the field is not NULL, it must contain the address of a function * of type H5C_auto_resize_report_fcn. * * set_initial_size: Boolean flag indicating whether the size of the * initial size of the cache is to be set to the value given in * the initial_size field. If set_initial_size is FALSE, the * initial_size field is ignored. * * initial_size: If enabled, this field contain the size the cache is * to be set to upon receipt of this structure. Needless to say, * initial_size must lie in the closed interval [min_size, max_size]. * * min_clean_fraction: double in the range 0 to 1 indicating the fraction * of the cache that is to be kept clean. This field is only used * in parallel mode. Typical values are 0.1 to 0.5. * * max_size: Maximum size to which the cache can be adjusted. The * supplied value must fall in the closed interval * [MIN_MAX_CACHE_SIZE, MAX_MAX_CACHE_SIZE]. Also, max_size must * be greater than or equal to min_size. * * min_size: Minimum size to which the cache can be adjusted. The * supplied value must fall in the closed interval * [MIN_MAX_CACHE_SIZE, MAX_MAX_CACHE_SIZE]. Also, min_size must * be less than or equal to max_size. * * epoch_length: Number of accesses on the cache over which to collect * hit rate stats before running the automatic cache resize code, * if it is enabled. * * At the end of an epoch, we discard prior hit rate data and start * collecting afresh. The epoch_length must lie in the closed * interval [H5C__MIN_AR_EPOCH_LENGTH, H5C__MAX_AR_EPOCH_LENGTH]. * * * Cache size increase control fields: * * incr_mode: Instance of the H5C_cache_incr_mode enumerated type whose * value indicates how we determine whether the cache size should be * increased. At present there are two possible values: * * H5C_incr__off: Don't attempt to increase the size of the cache * automatically. * * When this increment mode is selected, the remaining fields * in the cache size increase section ar ignored. * * H5C_incr__threshold: Attempt to increase the size of the cache * whenever the average hit rate over the last epoch drops * below the value supplied in the lower_hr_threshold * field. * * Note that this attempt will fail if the cache is already * at its maximum size, or if the cache is not already using * all available space. * * lower_hr_threshold: Lower hit rate threshold. If the increment mode * (incr_mode) is H5C_incr__threshold and the hit rate drops below the * value supplied in this field in an epoch, increment the cache size by * size_increment. Note that cache size may not be incremented above * max_size, and that the increment may be further restricted by the * max_increment field if it is enabled. * * When enabled, this field must contain a value in the range [0.0, 1.0]. * Depending on the incr_mode selected, it may also have to be less than * upper_hr_threshold. * * increment: Double containing the multiplier used to derive the new * cache size from the old if a cache size increment is triggered. * The increment must be greater than 1.0, and should not exceed 2.0. * * The new cache size is obtained by multiplying the current max cache * size by the increment, and then clamping to max_size and to stay * within the max_increment as necessary. * * apply_max_increment: Boolean flag indicating whether the max_increment * field should be used to limit the maximum cache size increment. * * max_increment: If enabled by the apply_max_increment field described * above, this field contains the maximum number of bytes by which the * cache size can be increased in a single re-size. * * flash_incr_mode: Instance of the H5C_cache_flash_incr_mode enumerated * type whose value indicates whether and by what algorithm we should * make flash increases in the size of the cache to accommodate insertion * of large entries and large increases in the size of a single entry. * * The addition of the flash increment mode was occasioned by performance * problems that appear when a local heap is increased to a size in excess * of the current cache size. While the existing re-size code dealt with * this eventually, performance was very bad for the remainder of the * epoch. * * At present, there are two possible values for the flash_incr_mode: * * H5C_flash_incr__off: Don't perform flash increases in the size of * the cache. * * H5C_flash_incr__add_space: Let x be either the size of a newly * newly inserted entry, or the number of bytes by which the * size of an existing entry has been increased. * * If * x > flash_threshold * current max cache size, * * increase the current maximum cache size by x * flash_multiple * less any free space in the cache, and start a new epoch. For * now at least, pay no attention to the maximum increment. * * * With a little thought, it should be obvious that the above flash * cache size increase algorithm is not sufficient for all * circumstances -- for example, suppose the user round robins through * (1/flash_threshold) +1 groups, adding one data set to each on each * pass. Then all will increase in size at about the same time, requiring * the max cache size to at least double to maintain acceptable * performance, however the above flash increment algorithm will not be * triggered. * * Hopefully, the add space algorithm detailed above will be sufficient * for the performance problems encountered to date. However, we should * expect to revisit the issue. * * flash_multiple: Double containing the multiple described above in the * H5C_flash_incr__add_space section of the discussion of the * flash_incr_mode section. This field is ignored unless flash_incr_mode * is H5C_flash_incr__add_space. * * flash_threshold: Double containing the factor by which current max cache * size is multiplied to obtain the size threshold for the add_space * flash increment algorithm. The field is ignored unless * flash_incr_mode is H5C_flash_incr__add_space. * * * Cache size decrease control fields: * * decr_mode: Instance of the H5C_cache_decr_mode enumerated type whose * value indicates how we determine whether the cache size should be * decreased. At present there are four possibilities. * * H5C_decr__off: Don't attempt to decrease the size of the cache * automatically. * * When this increment mode is selected, the remaining fields * in the cache size decrease section are ignored. * * H5C_decr__threshold: Attempt to decrease the size of the cache * whenever the average hit rate over the last epoch rises * above the value supplied in the upper_hr_threshold * field. * * H5C_decr__age_out: At the end of each epoch, search the cache for * entries that have not been accessed for at least the number * of epochs specified in the epochs_before_eviction field, and * evict these entries. Conceptually, the maximum cache size * is then decreased to match the new actual cache size. However, * this reduction may be modified by the min_size, the * max_decrement, and/or the empty_reserve. * * H5C_decr__age_out_with_threshold: Same as age_out, but we only * attempt to reduce the cache size when the hit rate observed * over the last epoch exceeds the value provided in the * upper_hr_threshold field. * * upper_hr_threshold: Upper hit rate threshold. The use of this field * varies according to the current decr_mode: * * H5C_decr__off or H5C_decr__age_out: The value of this field is * ignored. * * H5C_decr__threshold: If the hit rate exceeds this threshold in any * epoch, attempt to decrement the cache size by size_decrement. * * Note that cache size may not be decremented below min_size. * * Note also that if the upper_threshold is 1.0, the cache size * will never be reduced. * * H5C_decr__age_out_with_threshold: If the hit rate exceeds this * threshold in any epoch, attempt to reduce the cache size * by evicting entries that have not been accessed for more * than the specified number of epochs. * * decrement: This field is only used when the decr_mode is * H5C_decr__threshold. * * The field is a double containing the multiplier used to derive the * new cache size from the old if a cache size decrement is triggered. * The decrement must be in the range 0.0 (in which case the cache will * try to contract to its minimum size) to 1.0 (in which case the * cache will never shrink). * * apply_max_decrement: Boolean flag used to determine whether decrements * in cache size are to be limited by the max_decrement field. * * max_decrement: Maximum number of bytes by which the cache size can be * decreased in a single re-size. Note that decrements may also be * restricted by the min_size of the cache, and (in age out modes) by * the empty_reserve field. * * epochs_before_eviction: Integer field used in H5C_decr__age_out and * H5C_decr__age_out_with_threshold decrement modes. * * This field contains the number of epochs an entry must remain * unaccessed before it is evicted in an attempt to reduce the * cache size. If applicable, this field must lie in the range * [1, H5C__MAX_EPOCH_MARKERS]. * * apply_empty_reserve: Boolean field controlling whether the empty_reserve * field is to be used in computing the new cache size when the * decr_mode is H5C_decr__age_out or H5C_decr__age_out_with_threshold. * * empty_reserve: To avoid a constant racheting down of cache size by small * amounts in the H5C_decr__age_out and H5C_decr__age_out_with_threshold * modes, this field allows one to require that any cache size * reductions leave the specified fraction of unused space in the cache. * * The value of this field must be in the range [0.0, 1.0]. I would * expect typical values to be in the range of 0.01 to 0.1. * ****************************************************************************/ enum H5C_resize_status { in_spec, increase, flash_increase, decrease, at_max_size, at_min_size, increase_disabled, decrease_disabled, not_full }; /* enum H5C_resize_conditions */ typedef void (*H5C_auto_resize_rpt_fcn)(H5C_t * cache_ptr, int32_t version, double hit_rate, enum H5C_resize_status status, size_t old_max_cache_size, size_t new_max_cache_size, size_t old_min_clean_size, size_t new_min_clean_size); typedef struct H5C_auto_size_ctl_t { /* general configuration fields: */ int32_t version; H5C_auto_resize_rpt_fcn rpt_fcn; hbool_t set_initial_size; size_t initial_size; double min_clean_fraction; size_t max_size; size_t min_size; int64_t epoch_length; /* size increase control fields: */ enum H5C_cache_incr_mode incr_mode; double lower_hr_threshold; double increment; hbool_t apply_max_increment; size_t max_increment; enum H5C_cache_flash_incr_mode flash_incr_mode; double flash_multiple; double flash_threshold; /* size decrease control fields: */ enum H5C_cache_decr_mode decr_mode; double upper_hr_threshold; double decrement; hbool_t apply_max_decrement; size_t max_decrement; int32_t epochs_before_eviction; hbool_t apply_empty_reserve; double empty_reserve; } H5C_auto_size_ctl_t; /**************************************************************************** * * structure H5C_cache_image_ctl_t * * Instances of H5C_image_ctl_t are used to get and set the control * fields for generation of a metadata cache image on file close. * * At present control of construction of a cache image is via a FAPL * property at file open / create. * * The fields of the structure are discussed individually below: * * version: Integer field containing the version number of this version * of the H5C_image_ctl_t structure. Any instance of * H5C_image_ctl_t passed to the cache must have a known * version number, or an error will be flagged. * * generate_image: Boolean flag indicating whether a cache image should * be created on file close. * * save_resize_status: Boolean flag indicating whether the cache image * should include the adaptive cache resize configuration and status. * Note that this field is ignored at present. * * entry_ageout: Integer field indicating the maximum number of * times a prefetched entry can appear in subsequent cache images. * This field exists to allow the user to avoid the buildup of * infrequently used entries in long sequences of cache images. * * The value of this field must lie in the range * H5AC__CACHE_IMAGE__ENTRY_AGEOUT__NONE (-1) to * H5AC__CACHE_IMAGE__ENTRY_AGEOUT__MAX (100). * * H5AC__CACHE_IMAGE__ENTRY_AGEOUT__NONE means that no limit * is imposed on number of times a prefeteched entry can appear * in subsequent cache images. * * A value of 0 prevents prefetched entries from being included * in cache images. * * Positive integers restrict prefetched entries to the specified * number of appearances. * * Note that the number of subsequent cache images that a prefetched * entry has appeared in is tracked in an 8 bit field. Thus, while * H5AC__CACHE_IMAGE__ENTRY_AGEOUT__MAX can be increased from its * current value, any value in excess of 255 will be the functional * equivalent of H5AC__CACHE_IMAGE__ENTRY_AGEOUT__NONE. * * flags: Unsigned integer containing flags controlling which aspects of the * cache image functinality is actually executed. The primary impetus * behind this field is to allow development of tests for partial * implementations that will require little if any modification to run * with the full implementation. In normal operation, all flags should * be set. * ****************************************************************************/ #define H5C_CI__GEN_MDCI_SBE_MESG ((unsigned)0x0001) #define H5C_CI__GEN_MDC_IMAGE_BLK ((unsigned)0x0002) #define H5C_CI__SUPRESS_ENTRY_WRITES ((unsigned)0x0004) #define H5C_CI__WRITE_CACHE_IMAGE ((unsigned)0x0008) /* This #define must set all defined H5C_CI flags. It is * used in the default value for instances of H5C_cache_image_ctl_t. * This value will only be modified in test code. */ #define H5C_CI__ALL_FLAGS ((unsigned)0x000F) #define H5C__DEFAULT_CACHE_IMAGE_CTL \ { \ H5C__CURR_CACHE_IMAGE_CTL_VER, /* = version */ \ FALSE, /* = generate_image */ \ FALSE, /* = save_resize_status */ \ H5AC__CACHE_IMAGE__ENTRY_AGEOUT__NONE, /* = entry_ageout */ \ H5C_CI__ALL_FLAGS /* = flags */ \ } typedef struct H5C_cache_image_ctl_t { int32_t version; hbool_t generate_image; hbool_t save_resize_status; int32_t entry_ageout; unsigned flags; } H5C_cache_image_ctl_t; /* The cache logging output style */ typedef enum H5C_log_style_t { H5C_LOG_STYLE_JSON, H5C_LOG_STYLE_TRACE } H5C_log_style_t; /***************************************/ /* Library-private Function Prototypes */ /***************************************/ H5_DLL H5C_t *H5C_create(size_t max_cache_size, size_t min_clean_size, int max_type_id, const H5C_class_t * const *class_table_ptr, H5C_write_permitted_func_t check_write_permitted, hbool_t write_permitted, H5C_log_flush_func_t log_flush, void *aux_ptr); H5_DLL void H5C_def_auto_resize_rpt_fcn(H5C_t *cache_ptr, int32_t version, double hit_rate, enum H5C_resize_status status, size_t old_max_cache_size, size_t new_max_cache_size, size_t old_min_clean_size, size_t new_min_clean_size); H5_DLL herr_t H5C_dest(H5F_t *f); H5_DLL herr_t H5C_evict(H5F_t *f); H5_DLL herr_t H5C_expunge_entry(H5F_t *f, const H5C_class_t *type, haddr_t addr, unsigned flags); H5_DLL herr_t H5C_flush_cache(H5F_t *f, unsigned flags); H5_DLL herr_t H5C_flush_tagged_entries(H5F_t *f, haddr_t tag); H5_DLL herr_t H5C_force_cache_image_load(H5F_t * f); H5_DLL herr_t H5C_evict_tagged_entries(H5F_t *f, haddr_t tag, hbool_t match_global); H5_DLL herr_t H5C_expunge_tag_type_metadata(H5F_t *f, haddr_t tag, int type_id, unsigned flags); H5_DLL herr_t H5C_get_tag(const void *thing, /*OUT*/ haddr_t *tag); #if H5C_DO_TAGGING_SANITY_CHECKS herr_t H5C_verify_tag(int id, haddr_t tag); #endif H5_DLL herr_t H5C_flush_to_min_clean(H5F_t *f); H5_DLL herr_t H5C_get_cache_auto_resize_config(const H5C_t *cache_ptr, H5C_auto_size_ctl_t *config_ptr); H5_DLL herr_t H5C_get_cache_image_config(const H5C_t * cache_ptr, H5C_cache_image_ctl_t *config_ptr); H5_DLL herr_t H5C_get_cache_size(H5C_t *cache_ptr, size_t *max_size_ptr, size_t *min_clean_size_ptr, size_t *cur_size_ptr, uint32_t *cur_num_entries_ptr); H5_DLL herr_t H5C_get_cache_hit_rate(H5C_t *cache_ptr, double *hit_rate_ptr); H5_DLL herr_t H5C_get_entry_status(const H5F_t *f, haddr_t addr, size_t *size_ptr, hbool_t *in_cache_ptr, hbool_t *is_dirty_ptr, hbool_t *is_protected_ptr, hbool_t *is_pinned_ptr, hbool_t *is_corked_ptr, hbool_t *is_flush_dep_parent_ptr, hbool_t *is_flush_dep_child_ptr, hbool_t *image_up_to_date_ptr); H5_DLL herr_t H5C_get_evictions_enabled(const H5C_t *cache_ptr, hbool_t *evictions_enabled_ptr); H5_DLL void * H5C_get_aux_ptr(const H5C_t *cache_ptr); H5_DLL herr_t H5C_image_stats(H5C_t * cache_ptr, hbool_t print_header); H5_DLL herr_t H5C_insert_entry(H5F_t *f, const H5C_class_t *type, haddr_t addr, void *thing, unsigned int flags); H5_DLL herr_t H5C_load_cache_image_on_next_protect(H5F_t *f, haddr_t addr, hsize_t len, hbool_t rw); H5_DLL herr_t H5C_mark_entry_dirty(void *thing); H5_DLL herr_t H5C_mark_entry_clean(void *thing); H5_DLL herr_t H5C_mark_entry_unserialized(void *thing); H5_DLL herr_t H5C_mark_entry_serialized(void *thing); H5_DLL herr_t H5C_move_entry(H5C_t *cache_ptr, const H5C_class_t *type, haddr_t old_addr, haddr_t new_addr); H5_DLL herr_t H5C_pin_protected_entry(void *thing); H5_DLL herr_t H5C_prep_for_file_close(H5F_t *f); H5_DLL herr_t H5C_create_flush_dependency(void *parent_thing, void *child_thing); H5_DLL void * H5C_protect(H5F_t *f, const H5C_class_t *type, haddr_t addr, void *udata, unsigned flags); H5_DLL herr_t H5C_reset_cache_hit_rate_stats(H5C_t *cache_ptr); H5_DLL herr_t H5C_resize_entry(void *thing, size_t new_size); H5_DLL herr_t H5C_set_cache_auto_resize_config(H5C_t *cache_ptr, H5C_auto_size_ctl_t *config_ptr); H5_DLL herr_t H5C_set_cache_image_config(const H5F_t *f, H5C_t *cache_ptr, H5C_cache_image_ctl_t *config_ptr); H5_DLL herr_t H5C_set_evictions_enabled(H5C_t *cache_ptr, hbool_t evictions_enabled); H5_DLL herr_t H5C_set_slist_enabled(H5C_t *cache_ptr, hbool_t slist_enabled, hbool_t clear_slist); H5_DLL herr_t H5C_set_prefix(H5C_t *cache_ptr, char *prefix); H5_DLL herr_t H5C_stats(H5C_t *cache_ptr, const char *cache_name, hbool_t display_detailed_stats); H5_DLL void H5C_stats__reset(H5C_t *cache_ptr); H5_DLL herr_t H5C_unpin_entry(void *thing); H5_DLL herr_t H5C_destroy_flush_dependency(void *parent_thing, void *child_thing); H5_DLL herr_t H5C_unprotect(H5F_t *f, haddr_t addr, void *thing, unsigned int flags); H5_DLL herr_t H5C_validate_cache_image_config(H5C_cache_image_ctl_t * ctl_ptr); H5_DLL herr_t H5C_validate_resize_config(H5C_auto_size_ctl_t *config_ptr, unsigned int tests); H5_DLL herr_t H5C_ignore_tags(H5C_t *cache_ptr); H5_DLL hbool_t H5C_get_ignore_tags(const H5C_t *cache_ptr); H5_DLL uint32_t H5C_get_num_objs_corked(const H5C_t *cache_ptr); H5_DLL herr_t H5C_retag_entries(H5C_t * cache_ptr, haddr_t src_tag, haddr_t dest_tag); H5_DLL herr_t H5C_cork(H5C_t *cache_ptr, haddr_t obj_addr, unsigned action, hbool_t *corked); H5_DLL herr_t H5C_get_entry_ring(const H5F_t *f, haddr_t addr, H5C_ring_t *ring); H5_DLL herr_t H5C_unsettle_entry_ring(void *thing); H5_DLL herr_t H5C_unsettle_ring(H5F_t * f, H5C_ring_t ring); H5_DLL herr_t H5C_remove_entry(void *thing); H5_DLL herr_t H5C_cache_image_status(H5F_t * f, hbool_t *load_ci_ptr, hbool_t *write_ci_ptr); H5_DLL hbool_t H5C_cache_image_pending(const H5C_t *cache_ptr); H5_DLL herr_t H5C_get_mdc_image_info(H5C_t *cache_ptr, haddr_t *image_addr, hsize_t *image_len); /* Logging functions */ H5_DLL herr_t H5C_start_logging(H5C_t *cache); H5_DLL herr_t H5C_stop_logging(H5C_t *cache); H5_DLL herr_t H5C_get_logging_status(const H5C_t *cache, /*OUT*/ hbool_t *is_enabled, /*OUT*/ hbool_t *is_currently_logging); #ifdef H5_HAVE_PARALLEL H5_DLL herr_t H5C_apply_candidate_list(H5F_t *f, H5C_t *cache_ptr, unsigned num_candidates, haddr_t *candidates_list_ptr, int mpi_rank, int mpi_size); H5_DLL herr_t H5C_construct_candidate_list__clean_cache(H5C_t *cache_ptr); H5_DLL herr_t H5C_construct_candidate_list__min_clean(H5C_t *cache_ptr); H5_DLL herr_t H5C_clear_coll_entries(H5C_t * cache_ptr, hbool_t partial); H5_DLL herr_t H5C_mark_entries_as_clean(H5F_t *f, unsigned ce_array_len, haddr_t *ce_array_ptr); #endif /* H5_HAVE_PARALLEL */ #ifndef NDEBUG /* debugging functions */ H5_DLL herr_t H5C_dump_cache(H5C_t *cache_ptr, const char *cache_name); H5_DLL herr_t H5C_dump_cache_LRU(H5C_t *cache_ptr, const char *cache_name); H5_DLL hbool_t H5C_get_serialization_in_progress(const H5C_t *cache_ptr); H5_DLL hbool_t H5C_cache_is_clean(const H5C_t *cache_ptr, H5C_ring_t inner_ring); H5_DLL herr_t H5C_dump_cache_skip_list(H5C_t *cache_ptr, char *calling_fcn); H5_DLL herr_t H5C_get_entry_ptr_from_addr(H5C_t *cache_ptr, haddr_t addr, void **entry_ptr_ptr); H5_DLL herr_t H5C_flush_dependency_exists(H5C_t *cache_ptr, haddr_t parent_addr, haddr_t child_addr, hbool_t *fd_exists_ptr); H5_DLL herr_t H5C_verify_entry_type(H5C_t *cache_ptr, haddr_t addr, const H5C_class_t *expected_type, hbool_t *in_cache_ptr, hbool_t *type_ok_ptr); H5_DLL herr_t H5C_validate_index_list(H5C_t *cache_ptr); #endif /* NDEBUG */ #endif /* !_H5Cprivate_H */