/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Programmer: Quincey Koziol * Thursday, September 28, 2000 * * Purpose: * Contiguous dataset I/O functions. These routines are similar to * the H5D_chunk_* routines and really only an abstract way of dealing * with the data sieve buffer from H5F_seq_read/write. */ /****************/ /* Module Setup */ /****************/ #define H5D_PACKAGE /*suppress error about including H5Dpkg */ /***********/ /* Headers */ /***********/ #include "H5private.h" /* Generic Functions */ #include "H5Dpkg.h" /* Dataset functions */ #include "H5Eprivate.h" /* Error handling */ #include "H5Fprivate.h" /* Files */ #include "H5FDprivate.h" /* File drivers */ #include "H5FLprivate.h" /* Free Lists */ #include "H5Iprivate.h" /* IDs */ #include "H5MFprivate.h" /* File memory management */ #include "H5Oprivate.h" /* Object headers */ #include "H5Pprivate.h" /* Property lists */ #include "H5VMprivate.h" /* Vector and array functions */ /****************/ /* Local Macros */ /****************/ /******************/ /* Local Typedefs */ /******************/ /* Callback info for sieve buffer readvv operation */ typedef struct H5D_contig_readvv_sieve_ud_t { H5F_t *file; /* File for dataset */ H5D_rdcdc_t *dset_contig; /* Cached information about contiguous data */ const H5D_contig_storage_t *store_contig; /* Contiguous storage info for this I/O operation */ unsigned char *rbuf; /* Pointer to buffer to fill */ hid_t dxpl_id; /* DXPL for operation */ } H5D_contig_readvv_sieve_ud_t; /* Callback info for [plain] readvv operation */ typedef struct H5D_contig_readvv_ud_t { H5F_t *file; /* File for dataset */ haddr_t dset_addr; /* Address of dataset */ unsigned char *rbuf; /* Pointer to buffer to fill */ hid_t dxpl_id; /* DXPL for operation */ } H5D_contig_readvv_ud_t; /* Callback info for sieve buffer writevv operation */ typedef struct H5D_contig_writevv_sieve_ud_t { H5F_t *file; /* File for dataset */ H5D_rdcdc_t *dset_contig; /* Cached information about contiguous data */ const H5D_contig_storage_t *store_contig; /* Contiguous storage info for this I/O operation */ const unsigned char *wbuf; /* Pointer to buffer to write */ hid_t dxpl_id; /* DXPL for operation */ } H5D_contig_writevv_sieve_ud_t; /* Callback info for [plain] writevv operation */ typedef struct H5D_contig_writevv_ud_t { H5F_t *file; /* File for dataset */ haddr_t dset_addr; /* Address of dataset */ const unsigned char *wbuf; /* Pointer to buffer to write */ hid_t dxpl_id; /* DXPL for operation */ } H5D_contig_writevv_ud_t; /********************/ /* Local Prototypes */ /********************/ /* Layout operation callbacks */ static herr_t H5D__contig_construct(H5F_t *f, H5D_t *dset); static herr_t H5D__contig_io_init(const H5D_io_info_t *io_info, const H5D_type_info_t *type_info, hsize_t nelmts, const H5S_t *file_space, const H5S_t *mem_space, H5D_chunk_map_t *cm); static ssize_t H5D__contig_readvv(const H5D_io_info_t *io_info, size_t dset_max_nseq, size_t *dset_curr_seq, size_t dset_len_arr[], hsize_t dset_offset_arr[], size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_len_arr[], hsize_t mem_offset_arr[]); static ssize_t H5D__contig_writevv(const H5D_io_info_t *io_info, size_t dset_max_nseq, size_t *dset_curr_seq, size_t dset_len_arr[], hsize_t dset_offset_arr[], size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_len_arr[], hsize_t mem_offset_arr[]); static herr_t H5D__contig_flush(H5D_t *dset, hid_t dxpl_id); /* Helper routines */ static herr_t H5D__contig_write_one(H5D_io_info_t *io_info, hsize_t offset, size_t size); /*********************/ /* Package Variables */ /*********************/ /* Contiguous storage layout I/O ops */ const H5D_layout_ops_t H5D_LOPS_CONTIG[1] = {{ H5D__contig_construct, NULL, H5D__contig_is_space_alloc, H5D__contig_io_init, H5D__contig_read, H5D__contig_write, #ifdef H5_HAVE_PARALLEL H5D__contig_collective_read, H5D__contig_collective_write, #endif /* H5_HAVE_PARALLEL */ H5D__contig_readvv, H5D__contig_writevv, H5D__contig_flush, NULL }}; /*******************/ /* Local Variables */ /*******************/ /* Declare a PQ free list to manage the sieve buffer information */ H5FL_BLK_DEFINE(sieve_buf); /* Declare extern the free list to manage blocks of type conversion data */ H5FL_BLK_EXTERN(type_conv); /*------------------------------------------------------------------------- * Function: H5D__contig_alloc * * Purpose: Allocate file space for a contiguously stored dataset * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * April 19, 2003 * *------------------------------------------------------------------------- */ herr_t H5D__contig_alloc(H5F_t *f, hid_t dxpl_id, H5O_storage_contig_t *storage /*out */ ) { herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_PACKAGE /* check args */ HDassert(f); HDassert(storage); /* Allocate space for the contiguous data */ if(HADDR_UNDEF == (storage->addr = H5MF_alloc(f, H5FD_MEM_DRAW, dxpl_id, storage->size))) HGOTO_ERROR(H5E_IO, H5E_NOSPACE, FAIL, "unable to reserve file space") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_alloc */ /*------------------------------------------------------------------------- * Function: H5D__contig_fill * * Purpose: Write fill values to a contiguously stored dataset. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * August 22, 2002 * *------------------------------------------------------------------------- */ herr_t H5D__contig_fill(H5D_t *dset, hid_t dxpl_id) { H5D_io_info_t ioinfo; /* Dataset I/O info */ H5D_storage_t store; /* Union of storage info for dataset */ H5D_dxpl_cache_t _dxpl_cache; /* Data transfer property cache buffer */ H5D_dxpl_cache_t *dxpl_cache = &_dxpl_cache; /* Data transfer property cache */ hssize_t snpoints; /* Number of points in space (for error checking) */ size_t npoints; /* Number of points in space */ hsize_t offset; /* Offset of dataset */ #ifdef H5_HAVE_PARALLEL MPI_Comm mpi_comm = MPI_COMM_NULL; /* MPI communicator for file */ int mpi_rank = (-1); /* This process's rank */ int mpi_code; /* MPI return code */ hbool_t blocks_written = FALSE; /* Flag to indicate that chunk was actually written */ hbool_t using_mpi = FALSE; /* Flag to indicate that the file is being accessed with an MPI-capable file driver */ #endif /* H5_HAVE_PARALLEL */ H5D_fill_buf_info_t fb_info; /* Dataset's fill buffer info */ hbool_t fb_info_init = FALSE; /* Whether the fill value buffer has been initialized */ hid_t my_dxpl_id; /* DXPL ID to use for this operation */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_PACKAGE /* Check args */ HDassert(TRUE == H5P_isa_class(dxpl_id, H5P_DATASET_XFER)); HDassert(dset && H5D_CONTIGUOUS == dset->shared->layout.type); HDassert(H5F_addr_defined(dset->shared->layout.storage.u.contig.addr)); HDassert(dset->shared->layout.storage.u.contig.size > 0); HDassert(dset->shared->space); HDassert(dset->shared->type); #ifdef H5_HAVE_PARALLEL /* Retrieve MPI parameters */ if(IS_H5FD_MPI(dset->oloc.file)) { /* Get the MPI communicator */ if(MPI_COMM_NULL == (mpi_comm = H5F_mpi_get_comm(dset->oloc.file))) HGOTO_ERROR(H5E_INTERNAL, H5E_MPI, FAIL, "Can't retrieve MPI communicator") /* Get the MPI rank */ if((mpi_rank = H5F_mpi_get_rank(dset->oloc.file)) < 0) HGOTO_ERROR(H5E_INTERNAL, H5E_MPI, FAIL, "Can't retrieve MPI rank") /* Set the MPI-capable file driver flag */ using_mpi = TRUE; /* Use the internal "independent" DXPL */ my_dxpl_id = H5AC_ind_dxpl_id; } /* end if */ else { #endif /* H5_HAVE_PARALLEL */ /* Use the DXPL we were given */ my_dxpl_id = dxpl_id; #ifdef H5_HAVE_PARALLEL } /* end else */ #endif /* H5_HAVE_PARALLEL */ /* Fill the DXPL cache values for later use */ if(H5D__get_dxpl_cache(my_dxpl_id, &dxpl_cache) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't fill dxpl cache") /* Initialize storage info for this dataset */ store.contig.dset_addr = dset->shared->layout.storage.u.contig.addr; store.contig.dset_size = dset->shared->layout.storage.u.contig.size; /* Get the number of elements in the dataset's dataspace */ if((snpoints = H5S_GET_EXTENT_NPOINTS(dset->shared->space)) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "dataset has negative number of elements") H5_ASSIGN_OVERFLOW(npoints, snpoints, hssize_t, size_t); /* Initialize the fill value buffer */ if(H5D__fill_init(&fb_info, NULL, NULL, NULL, NULL, NULL, &dset->shared->dcpl_cache.fill, dset->shared->type, dset->shared->type_id, npoints, dxpl_cache->max_temp_buf, my_dxpl_id) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "can't initialize fill buffer info") fb_info_init = TRUE; /* Start at the beginning of the dataset */ offset = 0; /* Simple setup for dataset I/O info struct */ H5D_BUILD_IO_INFO_WRT(&ioinfo, dset, dxpl_cache, my_dxpl_id, &store, fb_info.fill_buf); /* * Fill the entire current extent with the fill value. We can do * this quite efficiently by making sure we copy the fill value * in relatively large pieces. */ /* Loop through writing the fill value to the dataset */ while(npoints > 0) { size_t curr_points; /* Number of elements to write on this iteration of the loop */ size_t size; /* Size of buffer to write */ /* Compute # of elements and buffer size to write for this iteration */ curr_points = MIN(fb_info.elmts_per_buf, npoints); size = curr_points * fb_info.file_elmt_size; /* Check for VL datatype & non-default fill value */ if(fb_info.has_vlen_fill_type) /* Re-fill the buffer to use for this I/O operation */ if(H5D__fill_refill_vl(&fb_info, curr_points, my_dxpl_id) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTCONVERT, FAIL, "can't refill fill value buffer") #ifdef H5_HAVE_PARALLEL /* Check if this file is accessed with an MPI-capable file driver */ if(using_mpi) { /* Write the chunks out from only one process */ /* !! Use the internal "independent" DXPL!! -QAK */ if(H5_PAR_META_WRITE == mpi_rank) if(H5D__contig_write_one(&ioinfo, offset, size) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to write fill value to dataset") /* Indicate that blocks are being written */ blocks_written = TRUE; } /* end if */ else { #endif /* H5_HAVE_PARALLEL */ H5_CHECK_OVERFLOW(size, size_t, hsize_t); if(H5D__contig_write_one(&ioinfo, offset, size) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to write fill value to dataset") #ifdef H5_HAVE_PARALLEL } /* end else */ #endif /* H5_HAVE_PARALLEL */ npoints -= curr_points; offset += size; } /* end while */ #ifdef H5_HAVE_PARALLEL /* Only need to block at the barrier if we actually wrote fill values */ /* And if we are using an MPI-capable file driver */ if(using_mpi && blocks_written) { /* Wait at barrier to avoid race conditions where some processes are * still writing out fill values and other processes race ahead to data * in, getting bogus data. */ if(MPI_SUCCESS != (mpi_code = MPI_Barrier(mpi_comm))) HMPI_GOTO_ERROR(FAIL, "MPI_Barrier failed", mpi_code) } /* end if */ #endif /* H5_HAVE_PARALLEL */ done: /* Release the fill buffer info, if it's been initialized */ if(fb_info_init && H5D__fill_term(&fb_info) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTFREE, FAIL, "Can't release fill buffer info") FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_fill() */ /*------------------------------------------------------------------------- * Function: H5D__contig_delete * * Purpose: Delete the file space for a contiguously stored dataset * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * March 20, 2003 * *------------------------------------------------------------------------- */ herr_t H5D__contig_delete(H5F_t *f, hid_t dxpl_id, const H5O_storage_t *storage) { herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_PACKAGE /* check args */ HDassert(f); HDassert(storage); /* Free the file space for the chunk */ if(H5MF_xfree(f, H5FD_MEM_DRAW, dxpl_id, storage->u.contig.addr, storage->u.contig.size) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTFREE, FAIL, "unable to free contiguous storage space") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_delete */ /*------------------------------------------------------------------------- * Function: H5D__contig_construct * * Purpose: Constructs new contiguous layout information for dataset * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Thursday, May 22, 2008 * *------------------------------------------------------------------------- */ /* ARGSUSED */ static herr_t H5D__contig_construct(H5F_t *f, H5D_t *dset) { hssize_t snelmts; /* Temporary holder for number of elements in dataspace */ hsize_t nelmts; /* Number of elements in dataspace */ size_t dt_size; /* Size of datatype */ hsize_t tmp_size; /* Temporary holder for raw data size */ size_t tmp_sieve_buf_size; /* Temporary holder for sieve buffer size */ hsize_t dim[H5O_LAYOUT_NDIMS]; /* Current size of data in elements */ hsize_t max_dim[H5O_LAYOUT_NDIMS]; /* Maximum size of data in elements */ int ndims; /* Rank of dataspace */ int i; /* Local index variable */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_STATIC /* Sanity checks */ HDassert(f); HDassert(dset); /* * The maximum size of the dataset cannot exceed the storage size. * Also, only the slowest varying dimension of a simple data space * can be extendible (currently only for external data storage). */ /* Check for invalid dataset dimensions */ if((ndims = H5S_get_simple_extent_dims(dset->shared->space, dim, max_dim)) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to initialize contiguous storage") for(i = 0; i < ndims; i++) if(max_dim[i] > dim[i]) HGOTO_ERROR(H5E_DATASET, H5E_UNSUPPORTED, FAIL, "extendible contiguous non-external dataset") /* Retrieve the number of elements in the dataspace */ if((snelmts = H5S_GET_EXTENT_NPOINTS(dset->shared->space)) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "unable to retrieve number of elements in dataspace") nelmts = (hsize_t)snelmts; /* Get the datatype's size */ if(0 == (dt_size = H5T_GET_SIZE(dset->shared->type))) HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "unable to retrieve size of datatype") /* Compute the size of the dataset's contiguous storage */ tmp_size = nelmts * dt_size; /* Check for overflow during multiplication */ if(nelmts != (tmp_size / dt_size)) HGOTO_ERROR(H5E_DATASET, H5E_OVERFLOW, FAIL, "size of dataset's storage overflowed") /* Assign the dataset's contiguous storage size */ dset->shared->layout.storage.u.contig.size = tmp_size; /* Get the sieve buffer size for the file */ tmp_sieve_buf_size = H5F_SIEVE_BUF_SIZE(f); /* Adjust the sieve buffer size to the smaller one between the dataset size and the buffer size * from the file access property. (SLU - 2012/3/30) */ if(tmp_size < tmp_sieve_buf_size) dset->shared->cache.contig.sieve_buf_size = tmp_size; else dset->shared->cache.contig.sieve_buf_size = tmp_sieve_buf_size; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_construct() */ /*------------------------------------------------------------------------- * Function: H5D__contig_is_space_alloc * * Purpose: Query if space is allocated for layout * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Thursday, January 15, 2009 * *------------------------------------------------------------------------- */ hbool_t H5D__contig_is_space_alloc(const H5O_storage_t *storage) { hbool_t ret_value; /* Return value */ FUNC_ENTER_PACKAGE_NOERR /* Sanity checks */ HDassert(storage); /* Set return value */ ret_value = (hbool_t)H5F_addr_defined(storage->u.contig.addr); FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_is_space_alloc() */ /*------------------------------------------------------------------------- * Function: H5D__contig_io_init * * Purpose: Performs initialization before any sort of I/O on the raw data * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Thursday, March 20, 2008 * *------------------------------------------------------------------------- */ static herr_t H5D__contig_io_init(const H5D_io_info_t *io_info, const H5D_type_info_t UNUSED *type_info, hsize_t UNUSED nelmts, const H5S_t UNUSED *file_space, const H5S_t UNUSED *mem_space, H5D_chunk_map_t UNUSED *cm) { FUNC_ENTER_STATIC_NOERR io_info->store->contig.dset_addr = io_info->dset->shared->layout.storage.u.contig.addr; io_info->store->contig.dset_size = io_info->dset->shared->layout.storage.u.contig.size; FUNC_LEAVE_NOAPI(SUCCEED) } /* end H5D__contig_io_init() */ /*------------------------------------------------------------------------- * Function: H5D__contig_read * * Purpose: Read from a contiguous dataset. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Thursday, April 10, 2003 * *------------------------------------------------------------------------- */ herr_t H5D__contig_read(H5D_io_info_t *io_info, const H5D_type_info_t *type_info, hsize_t nelmts, const H5S_t *file_space, const H5S_t *mem_space, H5D_chunk_map_t UNUSED *fm) { herr_t ret_value = SUCCEED; /*return value */ FUNC_ENTER_PACKAGE /* Sanity check */ HDassert(io_info); HDassert(io_info->u.rbuf); HDassert(type_info); HDassert(mem_space); HDassert(file_space); /* Read data */ if((io_info->io_ops.single_read)(io_info, type_info, nelmts, file_space, mem_space) < 0) HGOTO_ERROR(H5E_DATASET, H5E_READERROR, FAIL, "contiguous read failed") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_read() */ /*------------------------------------------------------------------------- * Function: H5D__contig_write * * Purpose: Write to a contiguous dataset. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Thursday, April 10, 2003 * *------------------------------------------------------------------------- */ herr_t H5D__contig_write(H5D_io_info_t *io_info, const H5D_type_info_t *type_info, hsize_t nelmts, const H5S_t *file_space, const H5S_t *mem_space, H5D_chunk_map_t UNUSED *fm) { herr_t ret_value = SUCCEED; /*return value */ FUNC_ENTER_PACKAGE /* Sanity check */ HDassert(io_info); HDassert(io_info->u.wbuf); HDassert(type_info); HDassert(mem_space); HDassert(file_space); /* Write data */ if((io_info->io_ops.single_write)(io_info, type_info, nelmts, file_space, mem_space) < 0) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "contiguous write failed") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_write() */ /*------------------------------------------------------------------------- * Function: H5D__contig_write_one * * Purpose: Writes some data from a dataset into a buffer. * The data is contiguous. The address is relative to the base * address for the file. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Thursday, September 28, 2000 * *------------------------------------------------------------------------- */ static herr_t H5D__contig_write_one(H5D_io_info_t *io_info, hsize_t offset, size_t size) { hsize_t dset_off = offset; /* Offset in dataset */ size_t dset_len = size; /* Length in dataset */ size_t dset_curr_seq = 0; /* "Current sequence" in dataset */ hsize_t mem_off = 0; /* Offset in memory */ size_t mem_len = size; /* Length in memory */ size_t mem_curr_seq = 0; /* "Current sequence" in memory */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_STATIC HDassert(io_info); if(H5D__contig_writevv(io_info, (size_t)1, &dset_curr_seq, &dset_len, &dset_off, (size_t)1, &mem_curr_seq, &mem_len, &mem_off) < 0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "vector write failed") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_write_one() */ /*------------------------------------------------------------------------- * Function: H5D__contig_readvv_sieve_cb * * Purpose: Callback operator for H5D__contig_readvv() with sieve buffer. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Thursday, Sept 30, 2010 * *------------------------------------------------------------------------- */ static herr_t H5D__contig_readvv_sieve_cb(hsize_t dst_off, hsize_t src_off, size_t len, void *_udata) { H5D_contig_readvv_sieve_ud_t *udata = (H5D_contig_readvv_sieve_ud_t *)_udata; /* User data for H5VM_opvv() operator */ H5F_t *file = udata->file; /* File for dataset */ H5D_rdcdc_t *dset_contig = udata->dset_contig; /* Cached information about contiguous data */ const H5D_contig_storage_t *store_contig = udata->store_contig; /* Contiguous storage info for this I/O operation */ unsigned char *buf; /* Pointer to buffer to fill */ haddr_t addr; /* Actual address to read */ haddr_t sieve_start = HADDR_UNDEF, sieve_end = HADDR_UNDEF; /* Start & end locations of sieve buffer */ haddr_t contig_end; /* End locations of block to write */ size_t sieve_size = (size_t)-1; /* Size of sieve buffer */ haddr_t rel_eoa; /* Relative end of file address */ hsize_t max_data; /* Actual maximum size of data to cache */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_STATIC /* Stash local copies of these value */ if(dset_contig->sieve_buf != NULL) { sieve_start = dset_contig->sieve_loc; sieve_size = dset_contig->sieve_size; sieve_end = sieve_start + sieve_size; } /* end if */ /* Compute offset on disk */ addr = store_contig->dset_addr + dst_off; /* Compute offset in memory */ buf = udata->rbuf + src_off; /* Check if the sieve buffer is allocated yet */ if(NULL == dset_contig->sieve_buf) { /* Check if we can actually hold the I/O request in the sieve buffer */ if(len > dset_contig->sieve_buf_size) { if(H5F_block_read(file, H5FD_MEM_DRAW, addr, len, udata->dxpl_id, buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_READERROR, FAIL, "block read failed") } /* end if */ else { /* Allocate room for the data sieve buffer */ if(NULL == (dset_contig->sieve_buf = H5FL_BLK_MALLOC(sieve_buf, dset_contig->sieve_buf_size))) HGOTO_ERROR(H5E_DATASET, H5E_CANTALLOC, FAIL, "memory allocation failed") /* Determine the new sieve buffer size & location */ dset_contig->sieve_loc = addr; /* Make certain we don't read off the end of the file */ if(HADDR_UNDEF == (rel_eoa = H5F_get_eoa(file, H5FD_MEM_DRAW))) HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "unable to determine file size") /* Set up the buffer parameters */ max_data = store_contig->dset_size - dst_off; /* Compute the size of the sieve buffer */ H5_ASSIGN_OVERFLOW(dset_contig->sieve_size, MIN3(rel_eoa - dset_contig->sieve_loc, max_data, dset_contig->sieve_buf_size), hsize_t, size_t); /* Read the new sieve buffer */ if(H5F_block_read(file, H5FD_MEM_DRAW, dset_contig->sieve_loc, dset_contig->sieve_size, udata->dxpl_id, dset_contig->sieve_buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_READERROR, FAIL, "block read failed") /* Grab the data out of the buffer (must be first piece of data in buffer ) */ HDmemcpy(buf, dset_contig->sieve_buf, len); /* Reset sieve buffer dirty flag */ dset_contig->sieve_dirty = FALSE; /* Stash local copies of these value */ sieve_start = dset_contig->sieve_loc; sieve_size = dset_contig->sieve_size; sieve_end = sieve_start+sieve_size; } /* end else */ } /* end if */ else { /* Compute end of sequence to retrieve */ contig_end = addr + len - 1; /* If entire read is within the sieve buffer, read it from the buffer */ if(addr >= sieve_start && contig_end < sieve_end) { unsigned char *base_sieve_buf = dset_contig->sieve_buf + (addr - sieve_start); /* Grab the data out of the buffer */ HDmemcpy(buf, base_sieve_buf, len); } /* end if */ /* Entire request is not within this data sieve buffer */ else { /* Check if we can actually hold the I/O request in the sieve buffer */ if(len > dset_contig->sieve_buf_size) { /* Check for any overlap with the current sieve buffer */ if((sieve_start >= addr && sieve_start < (contig_end + 1)) || ((sieve_end - 1) >= addr && (sieve_end - 1) < (contig_end + 1))) { /* Flush the sieve buffer, if it's dirty */ if(dset_contig->sieve_dirty) { /* Write to file */ if(H5F_block_write(file, H5FD_MEM_DRAW, sieve_start, sieve_size, udata->dxpl_id, dset_contig->sieve_buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "block write failed") /* Reset sieve buffer dirty flag */ dset_contig->sieve_dirty = FALSE; } /* end if */ } /* end if */ /* Read directly into the user's buffer */ if(H5F_block_read(file, H5FD_MEM_DRAW, addr, len, udata->dxpl_id, buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_READERROR, FAIL, "block read failed") } /* end if */ /* Element size fits within the buffer size */ else { /* Flush the sieve buffer if it's dirty */ if(dset_contig->sieve_dirty) { /* Write to file */ if(H5F_block_write(file, H5FD_MEM_DRAW, sieve_start, sieve_size, udata->dxpl_id, dset_contig->sieve_buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "block write failed") /* Reset sieve buffer dirty flag */ dset_contig->sieve_dirty = FALSE; } /* end if */ /* Determine the new sieve buffer size & location */ dset_contig->sieve_loc = addr; /* Make certain we don't read off the end of the file */ if(HADDR_UNDEF == (rel_eoa = H5F_get_eoa(file, H5FD_MEM_DRAW))) HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "unable to determine file size") /* Only need this when resizing sieve buffer */ max_data = store_contig->dset_size - dst_off; /* Compute the size of the sieve buffer */ /* Don't read off the end of the file, don't read past the end of the data element and don't read more than the buffer size */ H5_ASSIGN_OVERFLOW(dset_contig->sieve_size, MIN3(rel_eoa - dset_contig->sieve_loc, max_data, dset_contig->sieve_buf_size), hsize_t, size_t); /* Update local copies of sieve information */ sieve_start = dset_contig->sieve_loc; sieve_size = dset_contig->sieve_size; sieve_end = sieve_start + sieve_size; /* Read the new sieve buffer */ if(H5F_block_read(file, H5FD_MEM_DRAW, dset_contig->sieve_loc, dset_contig->sieve_size, udata->dxpl_id, dset_contig->sieve_buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_READERROR, FAIL, "block read failed") /* Grab the data out of the buffer (must be first piece of data in buffer ) */ HDmemcpy(buf, dset_contig->sieve_buf, len); /* Reset sieve buffer dirty flag */ dset_contig->sieve_dirty = FALSE; } /* end else */ } /* end else */ } /* end else */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_readvv_sieve_cb() */ /*------------------------------------------------------------------------- * Function: H5D__contig_readvv_cb * * Purpose: Callback operator for H5D__contig_readvv() without sieve buffer. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Thursday, Sept 30, 2010 * *------------------------------------------------------------------------- */ static herr_t H5D__contig_readvv_cb(hsize_t dst_off, hsize_t src_off, size_t len, void *_udata) { H5D_contig_readvv_ud_t *udata = (H5D_contig_readvv_ud_t *)_udata; /* User data for H5VM_opvv() operator */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_STATIC /* Write data */ if(H5F_block_read(udata->file, H5FD_MEM_DRAW, (udata->dset_addr + dst_off), len, udata->dxpl_id, (udata->rbuf + src_off)) < 0) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "block write failed") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_readvv_cb() */ /*------------------------------------------------------------------------- * Function: H5D__contig_readvv * * Purpose: Reads some data vectors from a dataset into a buffer. * The data is contiguous. The address is the start of the dataset, * relative to the base address for the file and the offsets and * sequence lengths are in bytes. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Friday, May 3, 2001 * * Notes: * Offsets in the sequences must be monotonically increasing * *------------------------------------------------------------------------- */ static ssize_t H5D__contig_readvv(const H5D_io_info_t *io_info, size_t dset_max_nseq, size_t *dset_curr_seq, size_t dset_len_arr[], hsize_t dset_off_arr[], size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_len_arr[], hsize_t mem_off_arr[]) { ssize_t ret_value; /* Return value */ FUNC_ENTER_STATIC /* Check args */ HDassert(io_info); HDassert(dset_curr_seq); HDassert(dset_len_arr); HDassert(dset_off_arr); HDassert(mem_curr_seq); HDassert(mem_len_arr); HDassert(mem_off_arr); /* Check if data sieving is enabled */ if(H5F_HAS_FEATURE(io_info->dset->oloc.file, H5FD_FEAT_DATA_SIEVE)) { H5D_contig_readvv_sieve_ud_t udata; /* User data for H5VM_opvv() operator */ /* Set up user data for H5VM_opvv() */ udata.file = io_info->dset->oloc.file; udata.dset_contig = &(io_info->dset->shared->cache.contig); udata.store_contig = &(io_info->store->contig); udata.rbuf = (unsigned char *)io_info->u.rbuf; udata.dxpl_id = io_info->dxpl_id; /* Call generic sequence operation routine */ if((ret_value = H5VM_opvv(dset_max_nseq, dset_curr_seq, dset_len_arr, dset_off_arr, mem_max_nseq, mem_curr_seq, mem_len_arr, mem_off_arr, H5D__contig_readvv_sieve_cb, &udata)) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTOPERATE, FAIL, "can't perform vectorized sieve buffer read") } /* end if */ else { H5D_contig_readvv_ud_t udata; /* User data for H5VM_opvv() operator */ /* Set up user data for H5VM_opvv() */ udata.file = io_info->dset->oloc.file; udata.dset_addr = io_info->store->contig.dset_addr; udata.rbuf = (unsigned char *)io_info->u.rbuf; udata.dxpl_id = io_info->dxpl_id; /* Call generic sequence operation routine */ if((ret_value = H5VM_opvv(dset_max_nseq, dset_curr_seq, dset_len_arr, dset_off_arr, mem_max_nseq, mem_curr_seq, mem_len_arr, mem_off_arr, H5D__contig_readvv_cb, &udata)) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTOPERATE, FAIL, "can't perform vectorized read") } /* end else */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_readvv() */ /*------------------------------------------------------------------------- * Function: H5D__contig_writevv_sieve_cb * * Purpose: Callback operator for H5D__contig_writevv() with sieve buffer. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Thursday, Sept 30, 2010 * *------------------------------------------------------------------------- */ static herr_t H5D__contig_writevv_sieve_cb(hsize_t dst_off, hsize_t src_off, size_t len, void *_udata) { H5D_contig_writevv_sieve_ud_t *udata = (H5D_contig_writevv_sieve_ud_t *)_udata; /* User data for H5VM_opvv() operator */ H5F_t *file = udata->file; /* File for dataset */ H5D_rdcdc_t *dset_contig = udata->dset_contig; /* Cached information about contiguous data */ const H5D_contig_storage_t *store_contig = udata->store_contig; /* Contiguous storage info for this I/O operation */ const unsigned char *buf; /* Pointer to buffer to fill */ haddr_t addr; /* Actual address to read */ haddr_t sieve_start = HADDR_UNDEF, sieve_end = HADDR_UNDEF; /* Start & end locations of sieve buffer */ haddr_t contig_end; /* End locations of block to write */ size_t sieve_size = (size_t)-1; /* size of sieve buffer */ haddr_t rel_eoa; /* Relative end of file address */ hsize_t max_data; /* Actual maximum size of data to cache */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_STATIC /* Stash local copies of these values */ if(dset_contig->sieve_buf != NULL) { sieve_start = dset_contig->sieve_loc; sieve_size = dset_contig->sieve_size; sieve_end = sieve_start + sieve_size; } /* end if */ /* Compute offset on disk */ addr = store_contig->dset_addr + dst_off; /* Compute offset in memory */ buf = udata->wbuf + src_off; /* No data sieve buffer yet, go allocate one */ if(NULL == dset_contig->sieve_buf) { /* Check if we can actually hold the I/O request in the sieve buffer */ if(len > dset_contig->sieve_buf_size) { if(H5F_block_write(file, H5FD_MEM_DRAW, addr, len, udata->dxpl_id, buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "block write failed") } /* end if */ else { /* Allocate room for the data sieve buffer */ if(NULL == (dset_contig->sieve_buf = H5FL_BLK_MALLOC(sieve_buf, dset_contig->sieve_buf_size))) HGOTO_ERROR(H5E_DATASET, H5E_CANTALLOC, FAIL, "memory allocation failed") #ifdef H5_CLEAR_MEMORY if(dset_contig->sieve_size > len) HDmemset(dset_contig->sieve_buf + len, 0, (dset_contig->sieve_size - len)); #endif /* H5_CLEAR_MEMORY */ /* Determine the new sieve buffer size & location */ dset_contig->sieve_loc = addr; /* Make certain we don't read off the end of the file */ if(HADDR_UNDEF == (rel_eoa = H5F_get_eoa(file, H5FD_MEM_DRAW))) HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "unable to determine file size") /* Set up the buffer parameters */ max_data = store_contig->dset_size - dst_off; /* Compute the size of the sieve buffer */ H5_ASSIGN_OVERFLOW(dset_contig->sieve_size, MIN3(rel_eoa - dset_contig->sieve_loc, max_data, dset_contig->sieve_buf_size), hsize_t, size_t); /* Check if there is any point in reading the data from the file */ if(dset_contig->sieve_size > len) { /* Read the new sieve buffer */ if(H5F_block_read(file, H5FD_MEM_DRAW, dset_contig->sieve_loc, dset_contig->sieve_size, udata->dxpl_id, dset_contig->sieve_buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_READERROR, FAIL, "block read failed") } /* end if */ /* Grab the data out of the buffer (must be first piece of data in buffer ) */ HDmemcpy(dset_contig->sieve_buf, buf, len); /* Set sieve buffer dirty flag */ dset_contig->sieve_dirty = TRUE; /* Stash local copies of these values */ sieve_start = dset_contig->sieve_loc; sieve_size = dset_contig->sieve_size; sieve_end = sieve_start + sieve_size; } /* end else */ } /* end if */ else { /* Compute end of sequence to retrieve */ contig_end = addr + len - 1; /* If entire write is within the sieve buffer, write it to the buffer */ if(addr >= sieve_start && contig_end < sieve_end) { unsigned char *base_sieve_buf = dset_contig->sieve_buf + (addr - sieve_start); /* Put the data into the sieve buffer */ HDmemcpy(base_sieve_buf, buf, len); /* Set sieve buffer dirty flag */ dset_contig->sieve_dirty = TRUE; } /* end if */ /* Entire request is not within this data sieve buffer */ else { /* Check if we can actually hold the I/O request in the sieve buffer */ if(len > dset_contig->sieve_buf_size) { /* Check for any overlap with the current sieve buffer */ if((sieve_start >= addr && sieve_start < (contig_end + 1)) || ((sieve_end - 1) >= addr && (sieve_end - 1) < (contig_end + 1))) { /* Flush the sieve buffer, if it's dirty */ if(dset_contig->sieve_dirty) { /* Write to file */ if(H5F_block_write(file, H5FD_MEM_DRAW, sieve_start, sieve_size, udata->dxpl_id, dset_contig->sieve_buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "block write failed") /* Reset sieve buffer dirty flag */ dset_contig->sieve_dirty = FALSE; } /* end if */ /* Force the sieve buffer to be re-read the next time */ dset_contig->sieve_loc = HADDR_UNDEF; dset_contig->sieve_size = 0; } /* end if */ /* Write directly from the user's buffer */ if(H5F_block_write(file, H5FD_MEM_DRAW, addr, len, udata->dxpl_id, buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "block write failed") } /* end if */ /* Element size fits within the buffer size */ else { /* Check if it is possible to (exactly) prepend or append to existing (dirty) sieve buffer */ if(((addr + len) == sieve_start || addr == sieve_end) && (len + sieve_size) <= dset_contig->sieve_buf_size && dset_contig->sieve_dirty) { /* Prepend to existing sieve buffer */ if((addr + len) == sieve_start) { /* Move existing sieve information to correct location */ HDmemmove(dset_contig->sieve_buf + len, dset_contig->sieve_buf, dset_contig->sieve_size); /* Copy in new information (must be first in sieve buffer) */ HDmemcpy(dset_contig->sieve_buf, buf, len); /* Adjust sieve location */ dset_contig->sieve_loc = addr; } /* end if */ /* Append to existing sieve buffer */ else { /* Copy in new information */ HDmemcpy(dset_contig->sieve_buf + sieve_size, buf, len); } /* end else */ /* Adjust sieve size */ dset_contig->sieve_size += len; /* Update local copies of sieve information */ sieve_start = dset_contig->sieve_loc; sieve_size = dset_contig->sieve_size; sieve_end = sieve_start + sieve_size; } /* end if */ /* Can't add the new data onto the existing sieve buffer */ else { /* Flush the sieve buffer if it's dirty */ if(dset_contig->sieve_dirty) { /* Write to file */ if(H5F_block_write(file, H5FD_MEM_DRAW, sieve_start, sieve_size, udata->dxpl_id, dset_contig->sieve_buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "block write failed") /* Reset sieve buffer dirty flag */ dset_contig->sieve_dirty = FALSE; } /* end if */ /* Determine the new sieve buffer size & location */ dset_contig->sieve_loc = addr; /* Make certain we don't read off the end of the file */ if(HADDR_UNDEF == (rel_eoa = H5F_get_eoa(file, H5FD_MEM_DRAW))) HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "unable to determine file size") /* Only need this when resizing sieve buffer */ max_data = store_contig->dset_size - dst_off; /* Compute the size of the sieve buffer */ /* Don't read off the end of the file, don't read past the end of the data element and don't read more than the buffer size */ H5_ASSIGN_OVERFLOW(dset_contig->sieve_size, MIN3(rel_eoa - dset_contig->sieve_loc, max_data, dset_contig->sieve_buf_size), hsize_t, size_t); /* Update local copies of sieve information */ sieve_start = dset_contig->sieve_loc; sieve_size = dset_contig->sieve_size; sieve_end = sieve_start + sieve_size; /* Check if there is any point in reading the data from the file */ if(dset_contig->sieve_size > len) { /* Read the new sieve buffer */ if(H5F_block_read(file, H5FD_MEM_DRAW, dset_contig->sieve_loc, dset_contig->sieve_size, udata->dxpl_id, dset_contig->sieve_buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_READERROR, FAIL, "block read failed") } /* end if */ /* Grab the data out of the buffer (must be first piece of data in buffer ) */ HDmemcpy(dset_contig->sieve_buf, buf, len); /* Set sieve buffer dirty flag */ dset_contig->sieve_dirty = TRUE; } /* end else */ } /* end else */ } /* end else */ } /* end else */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_writevv_sieve_cb() */ /*------------------------------------------------------------------------- * Function: H5D__contig_writevv_cb * * Purpose: Callback operator for H5D__contig_writevv(). * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Thursday, Sept 30, 2010 * *------------------------------------------------------------------------- */ static herr_t H5D__contig_writevv_cb(hsize_t dst_off, hsize_t src_off, size_t len, void *_udata) { H5D_contig_writevv_ud_t *udata = (H5D_contig_writevv_ud_t *)_udata; /* User data for H5VM_opvv() operator */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_STATIC /* Write data */ if(H5F_block_write(udata->file, H5FD_MEM_DRAW, (udata->dset_addr + dst_off), len, udata->dxpl_id, (udata->wbuf + src_off)) < 0) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "block write failed") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_writevv_cb() */ /*------------------------------------------------------------------------- * Function: H5D__contig_writevv * * Purpose: Writes some data vectors into a dataset from vectors into a * buffer. The address is the start of the dataset, * relative to the base address for the file and the offsets and * sequence lengths are in bytes. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Friday, May 2, 2003 * * Notes: * Offsets in the sequences must be monotonically increasing * *------------------------------------------------------------------------- */ static ssize_t H5D__contig_writevv(const H5D_io_info_t *io_info, size_t dset_max_nseq, size_t *dset_curr_seq, size_t dset_len_arr[], hsize_t dset_off_arr[], size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_len_arr[], hsize_t mem_off_arr[]) { ssize_t ret_value; /* Return value (Size of sequence in bytes) */ FUNC_ENTER_STATIC /* Check args */ HDassert(io_info); HDassert(dset_curr_seq); HDassert(dset_len_arr); HDassert(dset_off_arr); HDassert(mem_curr_seq); HDassert(mem_len_arr); HDassert(mem_off_arr); /* Check if data sieving is enabled */ if(H5F_HAS_FEATURE(io_info->dset->oloc.file, H5FD_FEAT_DATA_SIEVE)) { H5D_contig_writevv_sieve_ud_t udata; /* User data for H5VM_opvv() operator */ /* Set up user data for H5VM_opvv() */ udata.file = io_info->dset->oloc.file; udata.dset_contig = &(io_info->dset->shared->cache.contig); udata.store_contig = &(io_info->store->contig); udata.wbuf = (const unsigned char *)io_info->u.wbuf; udata.dxpl_id = io_info->dxpl_id; /* Call generic sequence operation routine */ if((ret_value = H5VM_opvv(dset_max_nseq, dset_curr_seq, dset_len_arr, dset_off_arr, mem_max_nseq, mem_curr_seq, mem_len_arr, mem_off_arr, H5D__contig_writevv_sieve_cb, &udata)) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTOPERATE, FAIL, "can't perform vectorized sieve buffer write") } /* end if */ else { H5D_contig_writevv_ud_t udata; /* User data for H5VM_opvv() operator */ /* Set up user data for H5VM_opvv() */ udata.file = io_info->dset->oloc.file; udata.dset_addr = io_info->store->contig.dset_addr; udata.wbuf = (const unsigned char *)io_info->u.wbuf; udata.dxpl_id = io_info->dxpl_id; /* Call generic sequence operation routine */ if((ret_value = H5VM_opvv(dset_max_nseq, dset_curr_seq, dset_len_arr, dset_off_arr, mem_max_nseq, mem_curr_seq, mem_len_arr, mem_off_arr, H5D__contig_writevv_cb, &udata)) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTOPERATE, FAIL, "can't perform vectorized read") } /* end else */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_writevv() */ /*------------------------------------------------------------------------- * Function: H5D__contig_flush * * Purpose: Writes all dirty data to disk. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Monday, July 27, 2009 * *------------------------------------------------------------------------- */ static herr_t H5D__contig_flush(H5D_t *dset, hid_t dxpl_id) { herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_STATIC /* Sanity check */ HDassert(dset); /* Flush any data in sieve buffer */ if(H5D__flush_sieve_buf(dset, dxpl_id) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTFLUSH, FAIL, "unable to flush sieve buffer") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_flush() */ /*------------------------------------------------------------------------- * Function: H5D__contig_copy * * Purpose: Copy contiguous storage raw data from SRC file to DST file. * * Return: Non-negative on success, negative on failure. * * Programmer: Quincey Koziol * Monday, November 21, 2005 * *------------------------------------------------------------------------- */ herr_t H5D__contig_copy(H5F_t *f_src, const H5O_storage_contig_t *storage_src, H5F_t *f_dst, H5O_storage_contig_t *storage_dst, H5T_t *dt_src, H5O_copy_t *cpy_info, hid_t dxpl_id) { haddr_t addr_src; /* File offset in source dataset */ haddr_t addr_dst; /* File offset in destination dataset */ H5T_path_t *tpath_src_mem = NULL, *tpath_mem_dst = NULL; /* Datatype conversion paths */ H5T_t *dt_dst = NULL; /* Destination datatype */ H5T_t *dt_mem = NULL; /* Memory datatype */ hid_t tid_src = -1; /* Datatype ID for source datatype */ hid_t tid_dst = -1; /* Datatype ID for destination datatype */ hid_t tid_mem = -1; /* Datatype ID for memory datatype */ size_t src_dt_size = 0; /* Source datatype size */ size_t mem_dt_size = 0; /* Memory datatype size */ size_t dst_dt_size = 0; /* Destination datatype size */ size_t max_dt_size; /* Max. datatype size */ size_t nelmts = 0; /* Number of elements in buffer */ size_t src_nbytes; /* Number of bytes to read from source */ size_t mem_nbytes; /* Number of bytes to convert in memory */ size_t dst_nbytes; /* Number of bytes to write to destination */ hsize_t total_src_nbytes; /* Total number of bytes to copy */ size_t buf_size; /* Size of copy buffer */ void *buf = NULL; /* Buffer for copying data */ void *bkg = NULL; /* Temporary buffer for copying data */ void *reclaim_buf = NULL; /* Buffer for reclaiming data */ H5S_t *buf_space = NULL; /* Dataspace describing buffer */ hid_t buf_sid = -1; /* ID for buffer dataspace */ hsize_t buf_dim[1] = {0}; /* Dimension for buffer */ hbool_t is_vlen = FALSE; /* Flag to indicate that VL type conversion should occur */ hbool_t fix_ref = FALSE; /* Flag to indicate that ref values should be fixed */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_PACKAGE /* Check args */ HDassert(f_src); HDassert(storage_src); HDassert(f_dst); HDassert(storage_dst); HDassert(dt_src); /* Allocate space for destination raw data */ if(H5D__contig_alloc(f_dst, dxpl_id, storage_dst) < 0) HGOTO_ERROR(H5E_IO, H5E_CANTINIT, FAIL, "unable to allocate contiguous storage") /* Set up number of bytes to copy, and initial buffer size */ /* (actually use the destination size, which has been fixed up, if necessary) */ total_src_nbytes = storage_dst->size; H5_CHECK_OVERFLOW(total_src_nbytes, hsize_t, size_t); buf_size = MIN(H5D_TEMP_BUF_SIZE, (size_t)total_src_nbytes); /* Create datatype ID for src datatype. We may or may not use this ID, * but this ensures that the src datatype will be freed. */ if((tid_src = H5I_register(H5I_DATATYPE, dt_src, FALSE)) < 0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTREGISTER, FAIL, "unable to register source file datatype") /* If there's a VLEN source datatype, set up type conversion information */ if(H5T_detect_class(dt_src, H5T_VLEN, FALSE) > 0) { /* create a memory copy of the variable-length datatype */ if(NULL == (dt_mem = H5T_copy(dt_src, H5T_COPY_TRANSIENT))) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to copy") if((tid_mem = H5I_register(H5I_DATATYPE, dt_mem, FALSE)) < 0) { H5T_close(dt_mem); HGOTO_ERROR(H5E_DATASET, H5E_CANTREGISTER, FAIL, "unable to register memory datatype") } /* end if */ /* create variable-length datatype at the destinaton file */ if(NULL == (dt_dst = H5T_copy(dt_src, H5T_COPY_TRANSIENT))) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to copy") if(H5T_set_loc(dt_dst, f_dst, H5T_LOC_DISK) < 0) { H5T_close(dt_dst); HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "cannot mark datatype on disk") } /* end if */ if((tid_dst = H5I_register(H5I_DATATYPE, dt_dst, FALSE)) < 0) { H5T_close(dt_dst); HGOTO_ERROR(H5E_DATASET, H5E_CANTREGISTER, FAIL, "unable to register destination file datatype") } /* end if */ /* Set up the conversion functions */ if(NULL == (tpath_src_mem = H5T_path_find(dt_src, dt_mem, NULL, NULL, dxpl_id, FALSE))) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to convert between src and mem datatypes") if(NULL == (tpath_mem_dst = H5T_path_find(dt_mem, dt_dst, NULL, NULL, dxpl_id, FALSE))) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to convert between mem and dst datatypes") /* Determine largest datatype size */ if(0 == (src_dt_size = H5T_get_size(dt_src))) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to determine datatype size") if(0 == (mem_dt_size = H5T_get_size(dt_mem))) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to determine datatype size") max_dt_size = MAX(src_dt_size, mem_dt_size); if(0 == (dst_dt_size = H5T_get_size(dt_dst))) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to determine datatype size") max_dt_size = MAX(max_dt_size, dst_dt_size); /* Set maximum number of whole elements that fit in buffer */ if(0 == (nelmts = buf_size / max_dt_size)) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "element size too large") /* Set the number of bytes to transfer */ src_nbytes = nelmts * src_dt_size; dst_nbytes = nelmts * dst_dt_size; mem_nbytes = nelmts * mem_dt_size; /* Adjust buffer size to be multiple of elements */ buf_size = nelmts * max_dt_size; /* Create dataspace for number of elements in buffer */ buf_dim[0] = nelmts; /* Create the space and set the initial extent */ if(NULL == (buf_space = H5S_create_simple((unsigned)1, buf_dim, NULL))) HGOTO_ERROR(H5E_DATASPACE, H5E_CANTCREATE, FAIL, "can't create simple dataspace") /* Atomize */ if((buf_sid = H5I_register(H5I_DATASPACE, buf_space, FALSE)) < 0) { H5S_close(buf_space); HGOTO_ERROR(H5E_ATOM, H5E_CANTREGISTER, FAIL, "unable to register dataspace ID") } /* end if */ /* Set flag to do type conversion */ is_vlen = TRUE; } /* end if */ else { /* Check for reference datatype */ if(H5T_get_class(dt_src, FALSE) == H5T_REFERENCE) { /* Need to fix values of references when copying across files */ if(f_src != f_dst) fix_ref = TRUE; } /* end if */ /* Set the number of bytes to read & write to the buffer size */ src_nbytes = dst_nbytes = mem_nbytes = buf_size; } /* end else */ /* Allocate space for copy buffer */ HDassert(buf_size); if(NULL == (buf = H5FL_BLK_MALLOC(type_conv, buf_size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for copy buffer") /* Need extra buffer for datatype conversions, to prevent stranding/leaking memory */ if(is_vlen || fix_ref) { if(NULL == (reclaim_buf = H5FL_BLK_MALLOC(type_conv, buf_size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for copy buffer") /* allocate temporary bkg buff for data conversion */ if(NULL == (bkg = H5FL_BLK_MALLOC(type_conv, buf_size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for copy buffer") } /* end if */ /* Loop over copying data */ addr_src = storage_src->addr; addr_dst = storage_dst->addr; while(total_src_nbytes > 0) { /* Check if we should reduce the number of bytes to transfer */ if(total_src_nbytes < src_nbytes) { /* Adjust bytes to transfer */ src_nbytes = (size_t)total_src_nbytes; /* Adjust dataspace describing buffer */ if(is_vlen) { /* Adjust destination & memory bytes to transfer */ nelmts = src_nbytes / src_dt_size; dst_nbytes = nelmts * dst_dt_size; mem_nbytes = nelmts * mem_dt_size; /* Adjust size of buffer's dataspace dimension */ buf_dim[0] = nelmts; /* Adjust size of buffer's dataspace */ if(H5S_set_extent_real(buf_space, buf_dim) < 0) HGOTO_ERROR(H5E_DATASPACE, H5E_CANTSET, FAIL, "unable to change buffer dataspace size") } /* end if */ else /* Adjust destination & memory bytes to transfer */ dst_nbytes = mem_nbytes = src_nbytes; } /* end if */ /* Read raw data from source file */ if(H5F_block_read(f_src, H5FD_MEM_DRAW, addr_src, src_nbytes, H5P_DATASET_XFER_DEFAULT, buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_READERROR, FAIL, "unable to read raw data") /* Perform datatype conversion, if necessary */ if(is_vlen) { /* Convert from source file to memory */ if(H5T_convert(tpath_src_mem, tid_src, tid_mem, nelmts, (size_t)0, (size_t)0, buf, bkg, dxpl_id) < 0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "datatype conversion failed") /* Copy into another buffer, to reclaim memory later */ HDmemcpy(reclaim_buf, buf, mem_nbytes); /* Set background buffer to all zeros */ HDmemset(bkg, 0, buf_size); /* Convert from memory to destination file */ if(H5T_convert(tpath_mem_dst, tid_mem, tid_dst, nelmts, (size_t)0, (size_t)0, buf, bkg, dxpl_id) < 0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "datatype conversion failed") /* Reclaim space from variable length data */ if(H5D_vlen_reclaim(tid_mem, buf_space, H5P_DATASET_XFER_DEFAULT, reclaim_buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_BADITER, FAIL, "unable to reclaim variable-length data") } /* end if */ else if(fix_ref) { /* Check for expanding references */ if(cpy_info->expand_ref) { size_t ref_count; /* Determine # of reference elements to copy */ ref_count = src_nbytes / H5T_get_size(dt_src); /* Copy the reference elements */ if(H5O_copy_expand_ref(f_src, buf, dxpl_id, f_dst, bkg, ref_count, H5T_get_ref_type(dt_src), cpy_info) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTCOPY, FAIL, "unable to copy reference attribute") /* After fix ref, copy the new reference elements to the buffer to write out */ HDmemcpy(buf, bkg, buf_size); } /* end if */ else /* Reset value to zero */ HDmemset(buf, 0, src_nbytes); } /* end if */ /* Write raw data to destination file */ if(H5F_block_write(f_dst, H5FD_MEM_DRAW, addr_dst, dst_nbytes, H5P_DATASET_XFER_DEFAULT, buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "unable to write raw data") /* Adjust loop variables */ addr_src += src_nbytes; addr_dst += dst_nbytes; total_src_nbytes -= src_nbytes; } /* end while */ done: if(buf_sid > 0 && H5I_dec_ref(buf_sid) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTFREE, FAIL, "can't decrement temporary dataspace ID") if(tid_src > 0 && H5I_dec_ref(tid_src) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTFREE, FAIL, "Can't decrement temporary datatype ID") if(tid_dst > 0 && H5I_dec_ref(tid_dst) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTFREE, FAIL, "Can't decrement temporary datatype ID") if(tid_mem > 0 && H5I_dec_ref(tid_mem) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTFREE, FAIL, "Can't decrement temporary datatype ID") if(buf) buf = H5FL_BLK_FREE(type_conv, buf); if(reclaim_buf) reclaim_buf = H5FL_BLK_FREE(type_conv, reclaim_buf); if(bkg) bkg = H5FL_BLK_FREE(type_conv, bkg); FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__contig_copy() */