/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Programmer: Quincey Koziol * Thursday, September 28, 2000 * * Purpose: * Contiguous dataset I/O functions. These routines are similar to * the H5D_istore_* routines and really only an abstract way of dealing * with the data sieve buffer from H5F_seq_read/write. */ #define H5D_PACKAGE /*suppress error about including H5Dpkg */ /* Pablo information */ /* (Put before include files to avoid problems with inline functions) */ #define PABLO_MASK H5Dcontig_mask #include "H5private.h" /* Generic Functions */ #include "H5Dpkg.h" /* Dataset functions */ #include "H5Eprivate.h" /* Error handling */ #include "H5Fprivate.h" /* Files */ #include "H5FDprivate.h" /* File drivers */ #include "H5FLprivate.h" /* Free Lists */ #include "H5MFprivate.h" /* File memory management */ #include "H5Oprivate.h" /* Object headers */ #include "H5Pprivate.h" /* Property lists */ #include "H5Sprivate.h" /* Dataspace functions */ #include "H5Vprivate.h" /* Vector and array functions */ /* Private prototypes */ static herr_t H5D_contig_write(H5F_t *f, hid_t dxpl_id, H5D_t *dset, hsize_t offset, size_t size, const void *buf); /* Interface initialization */ static int interface_initialize_g = 0; #define INTERFACE_INIT NULL /* Declare a PQ free list to manage the sieve buffer information */ H5FL_BLK_DEFINE(sieve_buf); /* Declare the free list to manage blocks of non-zero fill-value data */ H5FL_BLK_DEFINE_STATIC(non_zero_fill); /* Declare the free list to manage blocks of zero fill-value data */ H5FL_BLK_DEFINE_STATIC(zero_fill); /*------------------------------------------------------------------------- * Function: H5D_contig_create * * Purpose: Allocate file space for a contiguously stored dataset * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * April 19, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5D_contig_create(H5F_t *f, hid_t dxpl_id, H5D_t *dset) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5D_contig_create, FAIL); /* check args */ assert(f); assert(dset); /* Allocate space for the contiguous data */ if (HADDR_UNDEF==(dset->layout.u.contig.addr=H5MF_alloc(f, H5FD_MEM_DRAW, dxpl_id, dset->layout.u.contig.size))) HGOTO_ERROR (H5E_IO, H5E_NOSPACE, FAIL, "unable to reserve file space"); done: FUNC_LEAVE_NOAPI(ret_value); } /* end H5D_contig_create */ /*------------------------------------------------------------------------- * Function: H5D_contig_fill * * Purpose: Write fill values to a contiguously stored dataset. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * August 22, 2002 * * Modifications: * Bill Wendling, February 20, 2003 * Added support for getting the barrier COMM if you're using * Flexible PHDF5. * *------------------------------------------------------------------------- */ herr_t H5D_contig_fill(H5F_t *f, hid_t dxpl_id, H5D_t *dset) { hssize_t snpoints; /* Number of points in space (for error checking) */ size_t npoints; /* Number of points in space */ size_t ptsperbuf; /* Maximum # of points which fit in the buffer */ size_t elmt_size; /* Size of each element */ size_t bufsize=64*1024; /* Size of buffer to write */ size_t size; /* Current # of points to write */ hsize_t offset; /* Offset of dataset */ void *buf = NULL; /* Buffer for fill value writing */ #ifdef H5_HAVE_PARALLEL MPI_Comm mpi_comm=MPI_COMM_NULL; /* MPI communicator for file */ int mpi_rank=(-1); /* This process's rank */ int mpi_code; /* MPI return code */ unsigned blocks_written=0; /* Flag to indicate that chunk was actually written */ unsigned using_mpi=0; /* Flag to indicate that the file is being accessed with an MPI-capable file driver */ #endif /* H5_HAVE_PARALLEL */ int non_zero_fill_f=(-1); /* Indicate that a non-zero fill-value was used */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5D_contig_fill, FAIL); /* Check args */ assert(f); assert(TRUE==H5P_isa_class(dxpl_id,H5P_DATASET_XFER)); assert(dset && H5D_CONTIGUOUS==dset->layout.type); assert(H5F_addr_defined(dset->layout.u.contig.addr)); assert(dset->layout.u.contig.size>0); assert(dset->space); #ifdef H5_HAVE_PARALLEL /* Retrieve MPI parameters */ if(IS_H5FD_MPI(f)) { /* Get the MPI communicator */ if (MPI_COMM_NULL == (mpi_comm=H5F_mpi_get_comm(f))) HGOTO_ERROR(H5E_INTERNAL, H5E_MPI, FAIL, "Can't retrieve MPI communicator"); /* Get the MPI rank & size */ if ((mpi_rank=H5F_mpi_get_rank(f))<0) HGOTO_ERROR(H5E_INTERNAL, H5E_MPI, FAIL, "Can't retrieve MPI rank"); /* Set the MPI-capable file driver flag */ using_mpi=1; } /* end if */ #endif /* H5_HAVE_PARALLEL */ /* Get size of elements */ elmt_size=H5T_get_size(dset->type); assert(elmt_size>0); /* Get the number of elements in the dataset's dataspace */ snpoints = H5S_GET_SIMPLE_EXTENT_NPOINTS(dset->space); assert(snpoints>=0); H5_ASSIGN_OVERFLOW(npoints,snpoints,hssize_t,size_t); /* If fill value is not library default, use it to set the element size */ if(dset->fill.buf) elmt_size=dset->fill.size; /* * Fill the entire current extent with the fill value. We can do * this quite efficiently by making sure we copy the fill value * in relatively large pieces. */ ptsperbuf = MAX(1, bufsize/elmt_size); bufsize = ptsperbuf*elmt_size; /* Fill the buffer with the user's fill value */ if(dset->fill.buf) { /* Allocate temporary buffer */ if ((buf=H5FL_BLK_MALLOC(non_zero_fill,bufsize))==NULL) HGOTO_ERROR (H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for fill buffer"); H5V_array_fill(buf, dset->fill.buf, elmt_size, ptsperbuf); /* Indicate that a non-zero fill buffer was used */ non_zero_fill_f=1; } /* end if */ else { /* Fill the buffer with the default fill value */ htri_t buf_avail; /* Check if there is an already zeroed out buffer available */ buf_avail=H5FL_BLK_AVAIL(zero_fill,bufsize); assert(buf_avail!=FAIL); /* Allocate temporary buffer (zeroing it if no buffer is available) */ if(!buf_avail) buf=H5FL_BLK_CALLOC(zero_fill,bufsize); else buf=H5FL_BLK_MALLOC(zero_fill,bufsize); if(buf==NULL) HGOTO_ERROR (H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for fill buffer"); /* Indicate that a zero fill buffer was used */ non_zero_fill_f=0; } /* end else */ /* Start at the beginning of the dataset */ offset = 0; /* Loop through writing the fill value to the dataset */ while (npoints>0) { size = MIN(ptsperbuf, npoints) * elmt_size; #ifdef H5_HAVE_PARALLEL /* Check if this file is accessed with an MPI-capable file driver */ if(using_mpi) { /* Write the chunks out from only one process */ /* !! Use the internal "independent" DXPL!! -QAK */ if(H5_PAR_META_WRITE==mpi_rank) { if (H5D_contig_write(f, H5AC_ind_dxpl_id, dset, offset, size, buf)<0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to write fill value to dataset"); } /* end if */ /* Indicate that blocks are being written */ blocks_written=1; } /* end if */ else { #endif /* H5_HAVE_PARALLEL */ H5_CHECK_OVERFLOW(size,size_t,hsize_t); if (H5D_contig_write(f, dxpl_id, dset, offset, size, buf)<0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to write fill value to dataset"); #ifdef H5_HAVE_PARALLEL } /* end else */ #endif /* H5_HAVE_PARALLEL */ npoints -= MIN(ptsperbuf, npoints); offset += size; } /* end while */ #ifdef H5_HAVE_PARALLEL /* Only need to block at the barrier if we actually wrote fill values */ /* And if we are using an MPI-capable file driver */ if(using_mpi && blocks_written) { /* Wait at barrier to avoid race conditions where some processes are * still writing out fill values and other processes race ahead to data * in, getting bogus data. */ if (MPI_SUCCESS != (mpi_code=MPI_Barrier(mpi_comm))) HMPI_GOTO_ERROR(FAIL, "MPI_Barrier failed", mpi_code); } /* end if */ #endif /* H5_HAVE_PARALLEL */ done: /* Free the buffer for fill values */ if (buf) { assert(non_zero_fill_f>=0); if(non_zero_fill_f) H5FL_BLK_FREE(non_zero_fill,buf); else H5FL_BLK_FREE(zero_fill,buf); } /* end if */ FUNC_LEAVE_NOAPI(ret_value); } /* end H5D_contig_fill() */ /*------------------------------------------------------------------------- * Function: H5D_contig_delete * * Purpose: Delete the file space for a contiguously stored dataset * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * March 20, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5D_contig_delete(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5D_contig_delete, FAIL); /* check args */ assert(f); assert(layout); /* Free the file space for the chunk */ if (H5MF_xfree(f, H5FD_MEM_DRAW, dxpl_id, layout->u.contig.addr, layout->u.contig.size)<0) HGOTO_ERROR(H5E_OHDR, H5E_CANTFREE, FAIL, "unable to free object header"); done: FUNC_LEAVE_NOAPI(ret_value); } /* end H5D_contig_delete */ /*------------------------------------------------------------------------- * Function: H5D_contig_get_addr * * Purpose: Get the offset of the contiguous data on disk * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * June 2, 2004 * * Modifications: * *------------------------------------------------------------------------- */ haddr_t H5D_contig_get_addr(const H5D_t *dset) { haddr_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5D_contig_get_addr, HADDR_UNDEF); /* check args */ assert(dset); assert(dset->layout.type==H5D_CONTIGUOUS); /* Get the address */ ret_value=dset->layout.u.contig.addr; done: FUNC_LEAVE_NOAPI(ret_value); } /* end H5D_contig_get_addr */ /*------------------------------------------------------------------------- * Function: H5D_contig_write * * Purpose: Writes some data from a dataset into a buffer. * The data is contiguous. The address is relative to the base * address for the file. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Thursday, September 28, 2000 * * Modifications: * Re-written in terms of the new writevv call, QAK, 5/7/03 * *------------------------------------------------------------------------- */ static herr_t H5D_contig_write(H5F_t *f, hid_t dxpl_id, H5D_t *dset, hsize_t offset, size_t size, const void *buf) { hsize_t dset_off=offset; /* Offset in dataset */ size_t dset_len=size; /* Length in dataset */ size_t dset_curr_seq=0; /* "Current sequence" in dataset */ hsize_t mem_off=0; /* Offset in memory */ size_t mem_len=size; /* Length in memory */ size_t mem_curr_seq=0; /* "Current sequence" in memory */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5D_contig_write, FAIL); assert (f); assert (dset); assert (buf); if (H5D_contig_writevv(f, dxpl_id, dset, dset->layout.u.contig.addr, dset->layout.u.contig.size, 1, &dset_curr_seq, &dset_len, &dset_off, 1, &mem_curr_seq, &mem_len, &mem_off, buf)<0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "vector write failed"); done: FUNC_LEAVE_NOAPI(ret_value); } /* end H5D_contig_write() */ /*------------------------------------------------------------------------- * Function: H5D_contig_readvv * * Purpose: Reads some data vectors from a dataset into a buffer. * The data is contiguous. The address is the start of the dataset, * relative to the base address for the file and the offsets and * sequence lengths are in bytes. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Friday, May 3, 2001 * * Notes: * Offsets in the sequences must be monotonically increasing * * Modifications: * *------------------------------------------------------------------------- */ ssize_t H5D_contig_readvv(H5F_t *f, hid_t dxpl_id, H5D_t *dset, haddr_t dset_addr, hsize_t dset_size, size_t dset_max_nseq, size_t *dset_curr_seq, size_t dset_len_arr[], hsize_t dset_offset_arr[], size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_len_arr[], hsize_t mem_offset_arr[], void *_buf) { unsigned char *buf=(unsigned char *)_buf; /* Pointer to buffer to fill */ haddr_t abs_eoa; /* Absolute end of file address */ haddr_t rel_eoa; /* Relative end of file address */ haddr_t addr; /* Actual address to read */ hsize_t max_data; /* Actual maximum size of data to cache */ size_t size; /* Size of sequence in bytes */ size_t u; /* Counting variable */ size_t v; /* Counting variable */ ssize_t ret_value=0; /* Return value */ FUNC_ENTER_NOAPI(H5D_contig_readvv, FAIL); /* Check args */ assert(f); assert(dset); assert(buf); /* Check if data sieving is enabled */ if(H5F_HAS_FEATURE(f,H5FD_FEAT_DATA_SIEVE)) { haddr_t sieve_start, sieve_end; /* Start & end locations of sieve buffer */ haddr_t contig_end; /* End locations of block to write */ size_t sieve_size; /* size of sieve buffer */ /* Set offsets in sequence lists */ u=*dset_curr_seq; v=*mem_curr_seq; /* No data sieve buffer yet, go allocate one */ if(dset->cache.contig.sieve_buf==NULL) { /* Choose smallest buffer to write */ if(mem_len_arr[v]dset->cache.contig.sieve_buf_size) { if (H5F_block_read(f, H5FD_MEM_DRAW, addr, size, dxpl_id, buf)<0) HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "block read failed"); } /* end if */ else { /* Allocate room for the data sieve buffer */ if (NULL==(dset->cache.contig.sieve_buf=H5FL_BLK_MALLOC(sieve_buf,dset->cache.contig.sieve_buf_size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed"); /* Determine the new sieve buffer size & location */ dset->cache.contig.sieve_loc=addr; /* Make certain we don't read off the end of the file */ if (HADDR_UNDEF==(abs_eoa=H5F_get_eoa(f))) HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, FAIL, "unable to determine file size"); /* Adjust absolute EOA address to relative EOA address */ rel_eoa=abs_eoa-H5F_get_base_addr(f); /* Compute the size of the sieve buffer */ H5_ASSIGN_OVERFLOW(dset->cache.contig.sieve_size,MIN3(rel_eoa-dset->cache.contig.sieve_loc,max_data,dset->cache.contig.sieve_buf_size),hsize_t,size_t); /* Read the new sieve buffer */ if (H5F_block_read(f, H5FD_MEM_DRAW, dset->cache.contig.sieve_loc, dset->cache.contig.sieve_size, dxpl_id, dset->cache.contig.sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "block read failed"); /* Grab the data out of the buffer (must be first piece of data in buffer ) */ HDmemcpy(buf,dset->cache.contig.sieve_buf,size); /* Reset sieve buffer dirty flag */ dset->cache.contig.sieve_dirty=0; } /* end else */ /* Update memory information */ mem_len_arr[v]-=size; mem_offset_arr[v]+=size; if(mem_len_arr[v]==0) v++; /* Update file information */ dset_len_arr[u]-=size; dset_offset_arr[u]+=size; if(dset_len_arr[u]==0) u++; /* Increment number of bytes copied */ ret_value+=size; } /* end if */ /* Stash local copies of these value */ sieve_start=dset->cache.contig.sieve_loc; sieve_size=dset->cache.contig.sieve_size; sieve_end=sieve_start+sieve_size; /* Works through sequences as fast as possible */ for(; u=sieve_start && contig_endcache.contig.sieve_buf+(addr-sieve_start); /* Grab the data out of the buffer */ HDmemcpy(buf,base_sieve_buf,size); } /* end if */ /* Entire request is not within this data sieve buffer */ else { /* Check if we can actually hold the I/O request in the sieve buffer */ if(size>dset->cache.contig.sieve_buf_size) { /* Check for any overlap with the current sieve buffer */ if((sieve_start>=addr && sieve_start<(contig_end+1)) || ((sieve_end-1)>=addr && (sieve_end-1)<(contig_end+1))) { /* Flush the sieve buffer, if it's dirty */ if(dset->cache.contig.sieve_dirty) { /* Write to file */ if (H5F_block_write(f, H5FD_MEM_DRAW, sieve_start, sieve_size, dxpl_id, dset->cache.contig.sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed"); /* Reset sieve buffer dirty flag */ dset->cache.contig.sieve_dirty=0; } /* end if */ } /* end if */ /* Read directly into the user's buffer */ if (H5F_block_read(f, H5FD_MEM_DRAW, addr, size, dxpl_id, buf)<0) HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "block read failed"); } /* end if */ /* Element size fits within the buffer size */ else { /* Flush the sieve buffer if it's dirty */ if(dset->cache.contig.sieve_dirty) { /* Write to file */ if (H5F_block_write(f, H5FD_MEM_DRAW, sieve_start, sieve_size, dxpl_id, dset->cache.contig.sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed"); /* Reset sieve buffer dirty flag */ dset->cache.contig.sieve_dirty=0; } /* end if */ /* Determine the new sieve buffer size & location */ dset->cache.contig.sieve_loc=addr; /* Make certain we don't read off the end of the file */ if (HADDR_UNDEF==(abs_eoa=H5F_get_eoa(f))) HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, FAIL, "unable to determine file size"); /* Adjust absolute EOA address to relative EOA address */ rel_eoa=abs_eoa-H5F_get_base_addr(f); /* Only need this when resizing sieve buffer */ max_data=dset_size-dset_offset_arr[u]; /* Compute the size of the sieve buffer */ /* Don't read off the end of the file, don't read past the end of the data element and don't read more than the buffer size */ H5_ASSIGN_OVERFLOW(dset->cache.contig.sieve_size,MIN3(rel_eoa-dset->cache.contig.sieve_loc,max_data,dset->cache.contig.sieve_buf_size),hsize_t,size_t); /* Update local copies of sieve information */ sieve_start=dset->cache.contig.sieve_loc; sieve_size=dset->cache.contig.sieve_size; sieve_end=sieve_start+sieve_size; /* Read the new sieve buffer */ if (H5F_block_read(f, H5FD_MEM_DRAW, dset->cache.contig.sieve_loc, dset->cache.contig.sieve_size, dxpl_id, dset->cache.contig.sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "block read failed"); /* Grab the data out of the buffer (must be first piece of data in buffer ) */ HDmemcpy(buf,dset->cache.contig.sieve_buf,size); /* Reset sieve buffer dirty flag */ dset->cache.contig.sieve_dirty=0; } /* end else */ } /* end else */ /* Update memory information */ mem_len_arr[v]-=size; mem_offset_arr[v]+=size; if(mem_len_arr[v]==0) v++; /* Update file information */ dset_len_arr[u]-=size; dset_offset_arr[u]+=size; if(dset_len_arr[u]==0) u++; /* Increment number of bytes copied */ ret_value+=size; } /* end for */ } /* end if */ else { /* Work through all the sequences */ for(u=*dset_curr_seq, v=*mem_curr_seq; ucache.contig.sieve_buf==NULL) { /* Choose smallest buffer to write */ if(mem_len_arr[v]dset->cache.contig.sieve_buf_size) { if (H5F_block_write(f, H5FD_MEM_DRAW, addr, size, dxpl_id, buf)<0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed"); } /* end if */ else { /* Allocate room for the data sieve buffer */ if (NULL==(dset->cache.contig.sieve_buf=H5FL_BLK_MALLOC(sieve_buf,dset->cache.contig.sieve_buf_size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed"); /* Determine the new sieve buffer size & location */ dset->cache.contig.sieve_loc=addr; /* Make certain we don't read off the end of the file */ if (HADDR_UNDEF==(abs_eoa=H5F_get_eoa(f))) HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, FAIL, "unable to determine file size"); /* Adjust absolute EOA address to relative EOA address */ rel_eoa=abs_eoa-H5F_get_base_addr(f); /* Compute the size of the sieve buffer */ H5_ASSIGN_OVERFLOW(dset->cache.contig.sieve_size,MIN3(rel_eoa-dset->cache.contig.sieve_loc,max_data,dset->cache.contig.sieve_buf_size),hsize_t,size_t); /* Check if there is any point in reading the data from the file */ if(dset->cache.contig.sieve_size>size) { /* Read the new sieve buffer */ if (H5F_block_read(f, H5FD_MEM_DRAW, dset->cache.contig.sieve_loc, dset->cache.contig.sieve_size, dxpl_id, dset->cache.contig.sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "block read failed"); } /* end if */ /* Grab the data out of the buffer (must be first piece of data in buffer ) */ HDmemcpy(dset->cache.contig.sieve_buf,buf,size); /* Set sieve buffer dirty flag */ dset->cache.contig.sieve_dirty=1; } /* end else */ /* Update memory information */ mem_len_arr[v]-=size; mem_offset_arr[v]+=size; if(mem_len_arr[v]==0) v++; /* Update file information */ dset_len_arr[u]-=size; dset_offset_arr[u]+=size; if(dset_len_arr[u]==0) u++; /* Increment number of bytes copied */ ret_value+=size; } /* end if */ /* Stash local copies of these value */ sieve_start=dset->cache.contig.sieve_loc; sieve_size=dset->cache.contig.sieve_size; sieve_end=sieve_start+sieve_size; /* Works through sequences as fast as possible */ for(; u=sieve_start && contig_endcache.contig.sieve_buf+(addr-sieve_start); /* Put the data into the sieve buffer */ HDmemcpy(base_sieve_buf,buf,size); /* Set sieve buffer dirty flag */ dset->cache.contig.sieve_dirty=1; } /* end if */ /* Entire request is not within this data sieve buffer */ else { /* Check if we can actually hold the I/O request in the sieve buffer */ if(size>dset->cache.contig.sieve_buf_size) { /* Check for any overlap with the current sieve buffer */ if((sieve_start>=addr && sieve_start<(contig_end+1)) || ((sieve_end-1)>=addr && (sieve_end-1)<(contig_end+1))) { /* Flush the sieve buffer, if it's dirty */ if(dset->cache.contig.sieve_dirty) { /* Write to file */ if (H5F_block_write(f, H5FD_MEM_DRAW, sieve_start, sieve_size, dxpl_id, dset->cache.contig.sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed"); /* Reset sieve buffer dirty flag */ dset->cache.contig.sieve_dirty=0; } /* end if */ /* Force the sieve buffer to be re-read the next time */ dset->cache.contig.sieve_loc=HADDR_UNDEF; dset->cache.contig.sieve_size=0; } /* end if */ /* Write directly from the user's buffer */ if (H5F_block_write(f, H5FD_MEM_DRAW, addr, size, dxpl_id, buf)<0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed"); } /* end if */ /* Element size fits within the buffer size */ else { /* Check if it is possible to (exactly) prepend or append to existing (dirty) sieve buffer */ if(((addr+size)==sieve_start || addr==sieve_end) && (size+sieve_size)<=dset->cache.contig.sieve_buf_size && dset->cache.contig.sieve_dirty) { /* Prepend to existing sieve buffer */ if((addr+size)==sieve_start) { /* Move existing sieve information to correct location */ HDmemmove(dset->cache.contig.sieve_buf+size,dset->cache.contig.sieve_buf,sieve_size); /* Copy in new information (must be first in sieve buffer) */ HDmemcpy(dset->cache.contig.sieve_buf,buf,size); /* Adjust sieve location */ dset->cache.contig.sieve_loc=addr; } /* end if */ /* Append to existing sieve buffer */ else { /* Copy in new information */ HDmemcpy(dset->cache.contig.sieve_buf+sieve_size,buf,size); } /* end else */ /* Adjust sieve size */ dset->cache.contig.sieve_size += size; /* Update local copies of sieve information */ sieve_start=dset->cache.contig.sieve_loc; sieve_size=dset->cache.contig.sieve_size; sieve_end=sieve_start+sieve_size; } /* end if */ /* Can't add the new data onto the existing sieve buffer */ else { /* Flush the sieve buffer if it's dirty */ if(dset->cache.contig.sieve_dirty) { /* Write to file */ if (H5F_block_write(f, H5FD_MEM_DRAW, sieve_start, sieve_size, dxpl_id, dset->cache.contig.sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed"); /* Reset sieve buffer dirty flag */ dset->cache.contig.sieve_dirty=0; } /* end if */ /* Determine the new sieve buffer size & location */ dset->cache.contig.sieve_loc=addr; /* Make certain we don't read off the end of the file */ if (HADDR_UNDEF==(abs_eoa=H5F_get_eoa(f))) HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, FAIL, "unable to determine file size"); /* Adjust absolute EOA address to relative EOA address */ rel_eoa=abs_eoa-H5F_get_base_addr(f); /* Only need this when resizing sieve buffer */ max_data=dset_size-dset_offset_arr[u]; /* Compute the size of the sieve buffer */ /* Don't read off the end of the file, don't read past the end of the data element and don't read more than the buffer size */ H5_ASSIGN_OVERFLOW(dset->cache.contig.sieve_size,MIN3(rel_eoa-dset->cache.contig.sieve_loc,max_data,dset->cache.contig.sieve_buf_size),hsize_t,size_t); /* Update local copies of sieve information */ sieve_start=dset->cache.contig.sieve_loc; sieve_size=dset->cache.contig.sieve_size; sieve_end=sieve_start+sieve_size; /* Check if there is any point in reading the data from the file */ if(dset->cache.contig.sieve_size>size) { /* Read the new sieve buffer */ if (H5F_block_read(f, H5FD_MEM_DRAW, dset->cache.contig.sieve_loc, dset->cache.contig.sieve_size, dxpl_id, dset->cache.contig.sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "block read failed"); } /* end if */ /* Grab the data out of the buffer (must be first piece of data in buffer ) */ HDmemcpy(dset->cache.contig.sieve_buf,buf,size); /* Set sieve buffer dirty flag */ dset->cache.contig.sieve_dirty=1; } /* end else */ } /* end else */ } /* end else */ /* Update memory information */ mem_len_arr[v]-=size; mem_offset_arr[v]+=size; if(mem_len_arr[v]==0) v++; /* Update file information */ dset_len_arr[u]-=size; dset_offset_arr[u]+=size; if(dset_len_arr[u]==0) u++; /* Increment number of bytes copied */ ret_value+=size; } /* end for */ } /* end if */ else { /* Work through all the sequences */ for(u=*dset_curr_seq, v=*mem_curr_seq; u