/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Programmer: Quincey Koziol * Thursday, September 28, 2000 * * Purpose: * Contiguous dataset I/O functions. These routines are similar to * the H5D_istore_* routines and really only an abstract way of dealing * with the data sieve buffer from H5F_seq_read/write. */ /****************/ /* Module Setup */ /****************/ #define H5D_PACKAGE /*suppress error about including H5Dpkg */ /***********/ /* Headers */ /***********/ #include "H5private.h" /* Generic Functions */ #include "H5Dpkg.h" /* Dataset functions */ #include "H5Eprivate.h" /* Error handling */ #include "H5Fprivate.h" /* Files */ #include "H5FDprivate.h" /* File drivers */ #include "H5FLprivate.h" /* Free Lists */ #include "H5Iprivate.h" /* IDs */ #include "H5MFprivate.h" /* File memory management */ #include "H5Oprivate.h" /* Object headers */ #include "H5Pprivate.h" /* Property lists */ #include "H5Vprivate.h" /* Vector and array functions */ /****************/ /* Local Macros */ /****************/ /******************/ /* Local Typedefs */ /******************/ /********************/ /* Local Prototypes */ /********************/ static herr_t H5D_contig_write(H5D_t *dset, const H5D_dxpl_cache_t *dxpl_cache, hid_t dxpl_id, const H5D_storage_t *store, hsize_t offset, size_t size, const void *buf); /*********************/ /* Package Variables */ /*********************/ /*******************/ /* Local Variables */ /*******************/ /* Declare a PQ free list to manage the sieve buffer information */ H5FL_BLK_DEFINE(sieve_buf); /* Declare the free list to manage blocks of non-zero fill-value data */ H5FL_BLK_DEFINE_STATIC(non_zero_fill); /* Declare the free list to manage blocks of zero fill-value data */ H5FL_BLK_DEFINE_STATIC(zero_fill); /* Declare extern the free list to manage blocks of type conversion data */ H5FL_BLK_EXTERN(type_conv); /*------------------------------------------------------------------------- * Function: H5D_contig_create * * Purpose: Allocate file space for a contiguously stored dataset * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * April 19, 2003 * *------------------------------------------------------------------------- */ herr_t H5D_contig_create(H5F_t *f, hid_t dxpl_id, H5O_layout_t *layout /*out */ ) { herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5D_contig_create, FAIL) /* check args */ HDassert(f); HDassert(layout); /* Allocate space for the contiguous data */ if(HADDR_UNDEF == (layout->u.contig.addr = H5MF_alloc(f, H5FD_MEM_DRAW, dxpl_id, layout->u.contig.size))) HGOTO_ERROR(H5E_IO, H5E_NOSPACE, FAIL, "unable to reserve file space") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D_contig_create */ /*------------------------------------------------------------------------- * Function: H5D_contig_fill * * Purpose: Write fill values to a contiguously stored dataset. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * August 22, 2002 * *------------------------------------------------------------------------- */ herr_t H5D_contig_fill(H5D_t *dset, hid_t dxpl_id) { H5D_storage_t store; /* Union of storage info for dataset */ H5D_dxpl_cache_t _dxpl_cache; /* Data transfer property cache buffer */ H5D_dxpl_cache_t *dxpl_cache = &_dxpl_cache; /* Data transfer property cache */ hssize_t snpoints; /* Number of points in space (for error checking) */ size_t npoints; /* Number of points in space */ size_t ptsperbuf; /* Maximum # of points which fit in the buffer */ size_t elmt_size; /* Size of each element */ size_t bufsize = H5D_TEMP_BUF_SIZE; /* Size of buffer to write */ hsize_t offset; /* Offset of dataset */ void *buf = NULL; /* Buffer for fill value writing */ #ifdef H5_HAVE_PARALLEL MPI_Comm mpi_comm = MPI_COMM_NULL; /* MPI communicator for file */ int mpi_rank = (-1); /* This process's rank */ int mpi_code; /* MPI return code */ hbool_t blocks_written = FALSE; /* Flag to indicate that chunk was actually written */ hbool_t using_mpi = FALSE; /* Flag to indicate that the file is being accessed with an MPI-capable file driver */ #endif /* H5_HAVE_PARALLEL */ htri_t non_zero_fill_f = (-1); /* Indicate that a non-zero fill-value was used */ H5T_path_t *fill_to_mem_tpath; /* Datatype conversion path for converting the fill value to the memory buffer */ H5T_path_t *mem_to_dset_tpath; /* Datatype conversion path for converting the memory buffer to the dataset elements */ uint8_t *bkg_buf = NULL; /* Background conversion buffer */ H5T_t *mem_type = NULL; /* Pointer to memory datatype */ size_t mem_type_size, file_type_size; /* Size of datatype in memory and on disk */ hid_t mem_tid = (-1); /* Memory version of disk datatype */ size_t bkg_buf_size; /* Size of background buffer */ hbool_t has_vlen_fill_type = FALSE; /* Whether the datatype for the fill value has a variable-length component */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5D_contig_fill, FAIL) /* Check args */ HDassert(TRUE == H5P_isa_class(dxpl_id, H5P_DATASET_XFER)); HDassert(dset && H5D_CONTIGUOUS == dset->shared->layout.type); HDassert(H5F_addr_defined(dset->shared->layout.u.contig.addr)); HDassert(dset->shared->layout.u.contig.size > 0); HDassert(dset->shared->space); HDassert(dset->shared->type); #ifdef H5_HAVE_PARALLEL /* Retrieve MPI parameters */ if(IS_H5FD_MPI(dset->oloc.file)) { /* Get the MPI communicator */ if(MPI_COMM_NULL == (mpi_comm = H5F_mpi_get_comm(dset->oloc.file))) HGOTO_ERROR(H5E_INTERNAL, H5E_MPI, FAIL, "Can't retrieve MPI communicator") /* Get the MPI rank */ if((mpi_rank = H5F_mpi_get_rank(dset->oloc.file)) < 0) HGOTO_ERROR(H5E_INTERNAL, H5E_MPI, FAIL, "Can't retrieve MPI rank") /* Set the MPI-capable file driver flag */ using_mpi = TRUE; /* Fill the DXPL cache values for later use */ if (H5D_get_dxpl_cache(H5AC_ind_dxpl_id,&dxpl_cache)<0) HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't fill dxpl cache") } /* end if */ else { #endif /* H5_HAVE_PARALLEL */ /* Fill the DXPL cache values for later use */ if (H5D_get_dxpl_cache(dxpl_id,&dxpl_cache)<0) HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't fill dxpl cache") #ifdef H5_HAVE_PARALLEL } /* end else */ #endif /* H5_HAVE_PARALLEL */ /* Initialize storage info for this dataset */ store.contig.dset_addr = dset->shared->layout.u.contig.addr; store.contig.dset_size = dset->shared->layout.u.contig.size; /* Get the number of elements in the dataset's dataspace */ snpoints = H5S_GET_EXTENT_NPOINTS(dset->shared->space); HDassert(snpoints >= 0); H5_ASSIGN_OVERFLOW(npoints, snpoints, hssize_t, size_t); /* Fill the buffer with the user's fill value */ if(dset->shared->dcpl_cache.fill.buf) { /* Indicate that a non-zero fill buffer will be used */ non_zero_fill_f = TRUE; /* Detect whether the datatype has a VL component */ has_vlen_fill_type = H5T_detect_class(dset->shared->type, H5T_VLEN); /* If necessary, convert fill value datatypes (which copies VL components, etc.) */ if(has_vlen_fill_type) { /* Create temporary datatype for conversion operation */ if(NULL == (mem_type = H5T_copy(dset->shared->type, H5T_COPY_REOPEN))) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCOPY, FAIL, "unable to copy file datatype") if((mem_tid = H5I_register(H5I_DATATYPE, mem_type)) < 0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTREGISTER, FAIL, "unable to register memory datatype") /* Retrieve sizes of memory & file datatypes */ mem_type_size = H5T_get_size(mem_type); HDassert(mem_type_size > 0); file_type_size = H5T_get_size(dset->shared->type); HDassert(file_type_size == (size_t)dset->shared->dcpl_cache.fill.size); /* If fill value is not library default, use it to set the element size */ elmt_size = MAX(mem_type_size, file_type_size); /* Compute the number of elements that fit within a buffer to write */ ptsperbuf = MIN(npoints, MAX(1, bufsize / elmt_size)); bufsize = MAX(bufsize, ptsperbuf * elmt_size); /* Allocate temporary buffer */ if(NULL == (buf = H5FL_BLK_MALLOC(non_zero_fill, bufsize))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for fill buffer") /* Get the datatype conversion path for this operation */ if(NULL == (fill_to_mem_tpath = H5T_path_find(dset->shared->type, mem_type, NULL, NULL, dxpl_id, FALSE))) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to convert between src and dst datatypes") /* Allocate a background buffer, if necessary */ bkg_buf_size = ptsperbuf * elmt_size; if(H5T_path_bkg(fill_to_mem_tpath) && NULL == (bkg_buf = H5FL_BLK_MALLOC(type_conv, bkg_buf_size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed") /* Get the inverse datatype conversion path for this operation */ if(NULL == (mem_to_dset_tpath = H5T_path_find(mem_type, dset->shared->type, NULL, NULL, dxpl_id, FALSE))) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to convert between src and dst datatypes") /* Allocate the background buffer, if necessary */ if(H5T_path_bkg(mem_to_dset_tpath) && NULL == (bkg_buf = H5FL_BLK_MALLOC(type_conv, bkg_buf_size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed") } /* end if */ else { /* If fill value is not library default, use it to set the element size */ elmt_size = dset->shared->dcpl_cache.fill.size; /* Compute the number of elements that fit within a buffer to write */ ptsperbuf = MIN(npoints, MAX(1, bufsize / elmt_size)); bufsize = MAX(bufsize, ptsperbuf * elmt_size); /* Allocate temporary buffer */ if(NULL == (buf = H5FL_BLK_MALLOC(non_zero_fill, bufsize))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for fill buffer") /* Replicate the fill value into the cached buffer */ H5V_array_fill(buf, dset->shared->dcpl_cache.fill.buf, elmt_size, ptsperbuf); } /* end else */ } /* end if */ else { /* Fill the buffer with the default fill value */ htri_t buf_avail = H5FL_BLK_AVAIL(zero_fill, bufsize); /* Check if there is an already zeroed out buffer available */ HDassert(buf_avail != FAIL); /* Allocate temporary buffer (zeroing it if no buffer is available) */ if(!buf_avail) buf = H5FL_BLK_CALLOC(zero_fill, bufsize); else buf = H5FL_BLK_MALLOC(zero_fill, bufsize); if(buf == NULL) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for fill buffer") /* Retrieve size of elements */ elmt_size = H5T_get_size(dset->shared->type); HDassert(elmt_size > 0); /* Compute the number of elements that fit within a buffer to write */ ptsperbuf = MIN(npoints, MAX(1, bufsize / elmt_size)); /* Indicate that a zero fill buffer was used */ non_zero_fill_f = FALSE; } /* end else */ /* Start at the beginning of the dataset */ offset = 0; /* * Fill the entire current extent with the fill value. We can do * this quite efficiently by making sure we copy the fill value * in relatively large pieces. */ /* Loop through writing the fill value to the dataset */ while(npoints > 0) { size_t curr_points; /* Number of elements to write on this iteration of the loop */ size_t size; /* Size of buffer to write */ /* Compute # of elements and buffer size to write for this iteration */ curr_points = MIN(ptsperbuf, npoints); size = curr_points * elmt_size; /* Check for VL datatype & non-default fill value */ if(has_vlen_fill_type) { /* Make a copy of the (disk-based) fill value into the buffer */ HDmemcpy(buf, dset->shared->dcpl_cache.fill.buf, file_type_size); /* Reset the background buffer, if necessary */ if(H5T_path_bkg(fill_to_mem_tpath)) HDmemset(bkg_buf, 0, bkg_buf_size); /* Type convert the dataset buffer, to copy any VL components */ if(H5T_convert(fill_to_mem_tpath, dset->shared->type_id, mem_tid, (size_t)1, (size_t)0, (size_t)0, buf, bkg_buf, dxpl_id) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTCONVERT, FAIL, "data type conversion failed") /* Replicate the fill value into the cached buffer */ H5V_array_fill(buf, buf, mem_type_size, curr_points); /* Reset the background buffer, if necessary */ if(H5T_path_bkg(mem_to_dset_tpath)) HDmemset(bkg_buf, 0, bkg_buf_size); /* Type convert the dataset buffer, to copy any VL components */ if(H5T_convert(mem_to_dset_tpath, mem_tid, dset->shared->type_id, curr_points, (size_t)0, (size_t)0, buf, bkg_buf, dxpl_id) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTCONVERT, FAIL, "data type conversion failed") } /* end if */ #ifdef H5_HAVE_PARALLEL /* Check if this file is accessed with an MPI-capable file driver */ if(using_mpi) { /* Write the chunks out from only one process */ /* !! Use the internal "independent" DXPL!! -QAK */ if(H5_PAR_META_WRITE == mpi_rank) if(H5D_contig_write(dset, dxpl_cache, H5AC_ind_dxpl_id, &store, offset, size, buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to write fill value to dataset") /* Indicate that blocks are being written */ blocks_written = TRUE; } /* end if */ else { #endif /* H5_HAVE_PARALLEL */ H5_CHECK_OVERFLOW(size, size_t, hsize_t); if(H5D_contig_write(dset, dxpl_cache, dxpl_id, &store, offset, size, buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to write fill value to dataset") #ifdef H5_HAVE_PARALLEL } /* end else */ #endif /* H5_HAVE_PARALLEL */ npoints -= curr_points; offset += size; } /* end while */ #ifdef H5_HAVE_PARALLEL /* Only need to block at the barrier if we actually wrote fill values */ /* And if we are using an MPI-capable file driver */ if(using_mpi && blocks_written) { /* Wait at barrier to avoid race conditions where some processes are * still writing out fill values and other processes race ahead to data * in, getting bogus data. */ if(MPI_SUCCESS != (mpi_code = MPI_Barrier(mpi_comm))) HMPI_GOTO_ERROR(FAIL, "MPI_Barrier failed", mpi_code) } /* end if */ #endif /* H5_HAVE_PARALLEL */ done: /* Free the buffer for fill values */ if(buf) { HDassert(non_zero_fill_f >= 0); if(non_zero_fill_f) H5FL_BLK_FREE(non_zero_fill, buf); else H5FL_BLK_FREE(zero_fill, buf); } /* end if */ /* Free other resources for vlen fill values */ if(has_vlen_fill_type) { if(mem_tid > 0) H5I_dec_ref(mem_tid); else if(mem_type) H5T_close(mem_type); if(bkg_buf) H5FL_BLK_FREE(type_conv, bkg_buf); } /* end if */ FUNC_LEAVE_NOAPI(ret_value) } /* end H5D_contig_fill() */ /*------------------------------------------------------------------------- * Function: H5D_contig_delete * * Purpose: Delete the file space for a contiguously stored dataset * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * March 20, 2003 * *------------------------------------------------------------------------- */ herr_t H5D_contig_delete(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout) { herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5D_contig_delete, FAIL) /* check args */ HDassert(f); HDassert(layout); /* Free the file space for the chunk */ if(H5MF_xfree(f, H5FD_MEM_DRAW, dxpl_id, layout->u.contig.addr, layout->u.contig.size) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTFREE, FAIL, "unable to free object header") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D_contig_delete */ /*------------------------------------------------------------------------- * Function: H5D_contig_get_addr * * Purpose: Get the offset of the contiguous data on disk * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * June 2, 2004 * *------------------------------------------------------------------------- */ haddr_t H5D_contig_get_addr(const H5D_t *dset) { FUNC_ENTER_NOAPI_NOFUNC(H5D_contig_get_addr) /* check args */ assert(dset); assert(dset->shared->layout.type==H5D_CONTIGUOUS); FUNC_LEAVE_NOAPI(dset->shared->layout.u.contig.addr) } /* end H5D_contig_get_addr */ /*------------------------------------------------------------------------- * Function: H5D_contig_write * * Purpose: Writes some data from a dataset into a buffer. * The data is contiguous. The address is relative to the base * address for the file. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Thursday, September 28, 2000 * *------------------------------------------------------------------------- */ static herr_t H5D_contig_write(H5D_t *dset, const H5D_dxpl_cache_t *dxpl_cache, hid_t dxpl_id, const H5D_storage_t *store, hsize_t offset, size_t size, const void *buf) { H5D_io_info_t io_info; /* Dataset I/O info */ hsize_t dset_off=offset; /* Offset in dataset */ size_t dset_len=size; /* Length in dataset */ size_t dset_curr_seq=0; /* "Current sequence" in dataset */ hsize_t mem_off=0; /* Offset in memory */ size_t mem_len=size; /* Length in memory */ size_t mem_curr_seq=0; /* "Current sequence" in memory */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5D_contig_write, FAIL) assert (dset); assert (dxpl_cache); assert (store); assert (buf); H5D_BUILD_IO_INFO(&io_info,dset,dxpl_cache,dxpl_id,store); if(H5D_contig_writevv(&io_info, (size_t)1, &dset_curr_seq, &dset_len, &dset_off, (size_t)1, &mem_curr_seq, &mem_len, &mem_off, buf) < 0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "vector write failed") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D_contig_write() */ /*------------------------------------------------------------------------- * Function: H5D_contig_readvv * * Purpose: Reads some data vectors from a dataset into a buffer. * The data is contiguous. The address is the start of the dataset, * relative to the base address for the file and the offsets and * sequence lengths are in bytes. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Friday, May 3, 2001 * * Notes: * Offsets in the sequences must be monotonically increasing * *------------------------------------------------------------------------- */ ssize_t H5D_contig_readvv(const H5D_io_info_t *io_info, size_t dset_max_nseq, size_t *dset_curr_seq, size_t dset_len_arr[], hsize_t dset_offset_arr[], size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_len_arr[], hsize_t mem_offset_arr[], void *_buf) { H5F_t *file = io_info->dset->oloc.file; /* File for dataset */ H5D_rdcdc_t *dset_contig=&(io_info->dset->shared->cache.contig); /* Cached information about contiguous data */ const H5D_contig_storage_t *store_contig=&(io_info->store->contig); /* Contiguous storage info for this I/O operation */ unsigned char *buf=(unsigned char *)_buf; /* Pointer to buffer to fill */ haddr_t addr; /* Actual address to read */ size_t total_size=0; /* Total size of sequence in bytes */ size_t size; /* Size of sequence in bytes */ size_t u; /* Counting variable */ size_t v; /* Counting variable */ ssize_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5D_contig_readvv, FAIL) /* Check args */ assert(io_info); assert(io_info->dset); assert(io_info->store); assert(buf); /* Check if data sieving is enabled */ if(H5F_HAS_FEATURE(file,H5FD_FEAT_DATA_SIEVE)) { haddr_t sieve_start=HADDR_UNDEF, sieve_end=HADDR_UNDEF; /* Start & end locations of sieve buffer */ haddr_t contig_end; /* End locations of block to write */ size_t sieve_size=(size_t)-1; /* size of sieve buffer */ haddr_t abs_eoa; /* Absolute end of file address */ haddr_t rel_eoa; /* Relative end of file address */ hsize_t max_data; /* Actual maximum size of data to cache */ /* Set offsets in sequence lists */ u=*dset_curr_seq; v=*mem_curr_seq; /* Stash local copies of these value */ if(dset_contig->sieve_buf!=NULL) { sieve_start=dset_contig->sieve_loc; sieve_size=dset_contig->sieve_size; sieve_end=sieve_start+sieve_size; } /* end if */ /* Works through sequences as fast as possible */ for(; udset_addr+dset_offset_arr[u]; /* Compute offset in memory */ buf = (unsigned char *)_buf + mem_offset_arr[v]; /* Check if the sieve buffer is allocated yet */ if(dset_contig->sieve_buf==NULL) { /* Check if we can actually hold the I/O request in the sieve buffer */ if(size>dset_contig->sieve_buf_size) { if (H5F_block_read(file, H5FD_MEM_DRAW, addr, size, io_info->dxpl_id, buf)<0) HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "block read failed") } /* end if */ else { /* Allocate room for the data sieve buffer */ if (NULL==(dset_contig->sieve_buf=H5FL_BLK_MALLOC(sieve_buf,dset_contig->sieve_buf_size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed") /* Determine the new sieve buffer size & location */ dset_contig->sieve_loc=addr; /* Make certain we don't read off the end of the file */ if (HADDR_UNDEF==(abs_eoa=H5F_get_eoa(file))) HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, FAIL, "unable to determine file size") /* Adjust absolute EOA address to relative EOA address */ rel_eoa=abs_eoa-H5F_get_base_addr(file); /* Set up the buffer parameters */ max_data=store_contig->dset_size-dset_offset_arr[u]; /* Compute the size of the sieve buffer */ H5_ASSIGN_OVERFLOW(dset_contig->sieve_size,MIN3(rel_eoa-dset_contig->sieve_loc,max_data,dset_contig->sieve_buf_size),hsize_t,size_t); /* Read the new sieve buffer */ if (H5F_block_read(file, H5FD_MEM_DRAW, dset_contig->sieve_loc, dset_contig->sieve_size, io_info->dxpl_id, dset_contig->sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "block read failed") /* Grab the data out of the buffer (must be first piece of data in buffer ) */ HDmemcpy(buf,dset_contig->sieve_buf,size); /* Reset sieve buffer dirty flag */ dset_contig->sieve_dirty=0; /* Stash local copies of these value */ sieve_start=dset_contig->sieve_loc; sieve_size=dset_contig->sieve_size; sieve_end=sieve_start+sieve_size; } /* end else */ } /* end if */ else { /* Compute end of sequence to retrieve */ contig_end=addr+size-1; /* If entire read is within the sieve buffer, read it from the buffer */ if(addr>=sieve_start && contig_endsieve_buf+(addr-sieve_start); /* Grab the data out of the buffer */ HDmemcpy(buf,base_sieve_buf,size); } /* end if */ /* Entire request is not within this data sieve buffer */ else { /* Check if we can actually hold the I/O request in the sieve buffer */ if(size>dset_contig->sieve_buf_size) { /* Check for any overlap with the current sieve buffer */ if((sieve_start>=addr && sieve_start<(contig_end+1)) || ((sieve_end-1)>=addr && (sieve_end-1)<(contig_end+1))) { /* Flush the sieve buffer, if it's dirty */ if(dset_contig->sieve_dirty) { /* Write to file */ if (H5F_block_write(file, H5FD_MEM_DRAW, sieve_start, sieve_size, io_info->dxpl_id, dset_contig->sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed") /* Reset sieve buffer dirty flag */ dset_contig->sieve_dirty=0; } /* end if */ } /* end if */ /* Read directly into the user's buffer */ if (H5F_block_read(file, H5FD_MEM_DRAW, addr, size, io_info->dxpl_id, buf)<0) HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "block read failed") } /* end if */ /* Element size fits within the buffer size */ else { /* Flush the sieve buffer if it's dirty */ if(dset_contig->sieve_dirty) { /* Write to file */ if (H5F_block_write(file, H5FD_MEM_DRAW, sieve_start, sieve_size, io_info->dxpl_id, dset_contig->sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed") /* Reset sieve buffer dirty flag */ dset_contig->sieve_dirty=0; } /* end if */ /* Determine the new sieve buffer size & location */ dset_contig->sieve_loc=addr; /* Make certain we don't read off the end of the file */ if (HADDR_UNDEF==(abs_eoa=H5F_get_eoa(file))) HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, FAIL, "unable to determine file size") /* Adjust absolute EOA address to relative EOA address */ rel_eoa=abs_eoa-H5F_get_base_addr(file); /* Only need this when resizing sieve buffer */ max_data=store_contig->dset_size-dset_offset_arr[u]; /* Compute the size of the sieve buffer */ /* Don't read off the end of the file, don't read past the end of the data element and don't read more than the buffer size */ H5_ASSIGN_OVERFLOW(dset_contig->sieve_size,MIN3(rel_eoa-dset_contig->sieve_loc,max_data,dset_contig->sieve_buf_size),hsize_t,size_t); /* Update local copies of sieve information */ sieve_start=dset_contig->sieve_loc; sieve_size=dset_contig->sieve_size; sieve_end=sieve_start+sieve_size; /* Read the new sieve buffer */ if (H5F_block_read(file, H5FD_MEM_DRAW, dset_contig->sieve_loc, dset_contig->sieve_size, io_info->dxpl_id, dset_contig->sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "block read failed") /* Grab the data out of the buffer (must be first piece of data in buffer ) */ HDmemcpy(buf,dset_contig->sieve_buf,size); /* Reset sieve buffer dirty flag */ dset_contig->sieve_dirty=0; } /* end else */ } /* end else */ } /* end else */ /* Update memory information */ mem_len_arr[v]-=size; mem_offset_arr[v]+=size; if(mem_len_arr[v]==0) v++; /* Update file information */ dset_len_arr[u]-=size; dset_offset_arr[u]+=size; if(dset_len_arr[u]==0) u++; /* Increment number of bytes copied */ total_size+=size; } /* end for */ } /* end if */ else { /* Work through all the sequences */ for(u=*dset_curr_seq, v=*mem_curr_seq; udset_addr+dset_offset_arr[u]; /* Compute offset in memory */ buf = (unsigned char *)_buf + mem_offset_arr[v]; /* Write data */ if (H5F_block_read(file, H5FD_MEM_DRAW, addr, size, io_info->dxpl_id, buf)<0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed") /* Update memory information */ mem_len_arr[v]-=size; mem_offset_arr[v]+=size; if(mem_len_arr[v]==0) v++; /* Update file information */ dset_len_arr[u]-=size; dset_offset_arr[u]+=size; if(dset_len_arr[u]==0) u++; /* Increment number of bytes copied */ total_size+=size; } /* end for */ } /* end else */ /* Update current sequence vectors */ *dset_curr_seq=u; *mem_curr_seq=v; /* Set return value */ H5_ASSIGN_OVERFLOW(ret_value,total_size,size_t,ssize_t); done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D_contig_readvv() */ /*------------------------------------------------------------------------- * Function: H5D_contig_writevv * * Purpose: Writes some data vectors into a dataset from vectors into a * buffer. The address is the start of the dataset, * relative to the base address for the file and the offsets and * sequence lengths are in bytes. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Friday, May 2, 2003 * * Notes: * Offsets in the sequences must be monotonically increasing * *------------------------------------------------------------------------- */ ssize_t H5D_contig_writevv(const H5D_io_info_t *io_info, size_t dset_max_nseq, size_t *dset_curr_seq, size_t dset_len_arr[], hsize_t dset_offset_arr[], size_t mem_max_nseq, size_t *mem_curr_seq, size_t mem_len_arr[], hsize_t mem_offset_arr[], const void *_buf) { H5F_t *file = io_info->dset->oloc.file; /* File for dataset */ H5D_rdcdc_t *dset_contig=&(io_info->dset->shared->cache.contig); /* Cached information about contiguous data */ const H5D_contig_storage_t *store_contig=&(io_info->store->contig); /* Contiguous storage info for this I/O operation */ const unsigned char *buf=_buf; /* Pointer to buffer to fill */ haddr_t addr; /* Actual address to read */ size_t total_size=0; /* Size of sequence in bytes */ size_t size; /* Size of sequence in bytes */ size_t u; /* Counting variable */ size_t v; /* Counting variable */ ssize_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5D_contig_writevv, FAIL) /* Check args */ assert(io_info); assert(io_info->dset); assert(io_info->store); assert(buf); /* Check if data sieving is enabled */ if(H5F_HAS_FEATURE(file,H5FD_FEAT_DATA_SIEVE)) { haddr_t sieve_start=HADDR_UNDEF, sieve_end=HADDR_UNDEF; /* Start & end locations of sieve buffer */ haddr_t contig_end; /* End locations of block to write */ size_t sieve_size=(size_t)-1; /* size of sieve buffer */ haddr_t abs_eoa; /* Absolute end of file address */ haddr_t rel_eoa; /* Relative end of file address */ hsize_t max_data; /* Actual maximum size of data to cache */ /* Set offsets in sequence lists */ u=*dset_curr_seq; v=*mem_curr_seq; /* Stash local copies of these values */ if(dset_contig->sieve_buf!=NULL) { sieve_start=dset_contig->sieve_loc; sieve_size=dset_contig->sieve_size; sieve_end=sieve_start+sieve_size; } /* end if */ /* Works through sequences as fast as possible */ for(; udset_addr+dset_offset_arr[u]; /* Compute offset in memory */ buf = (const unsigned char *)_buf + mem_offset_arr[v]; /* No data sieve buffer yet, go allocate one */ if(dset_contig->sieve_buf==NULL) { /* Check if we can actually hold the I/O request in the sieve buffer */ if(size>dset_contig->sieve_buf_size) { if (H5F_block_write(file, H5FD_MEM_DRAW, addr, size, io_info->dxpl_id, buf)<0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed") } /* end if */ else { /* Allocate room for the data sieve buffer */ if (NULL==(dset_contig->sieve_buf=H5FL_BLK_MALLOC(sieve_buf,dset_contig->sieve_buf_size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed") #ifdef H5_CLEAR_MEMORY if(dset_contig->sieve_size > size) HDmemset(dset_contig->sieve_buf + size, 0, (dset_contig->sieve_size - size)); #endif /* H5_CLEAR_MEMORY */ /* Determine the new sieve buffer size & location */ dset_contig->sieve_loc=addr; /* Make certain we don't read off the end of the file */ if (HADDR_UNDEF==(abs_eoa=H5F_get_eoa(file))) HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, FAIL, "unable to determine file size") /* Adjust absolute EOA address to relative EOA address */ rel_eoa=abs_eoa-H5F_get_base_addr(file); /* Set up the buffer parameters */ max_data=store_contig->dset_size-dset_offset_arr[u]; /* Compute the size of the sieve buffer */ H5_ASSIGN_OVERFLOW(dset_contig->sieve_size,MIN3(rel_eoa-dset_contig->sieve_loc,max_data,dset_contig->sieve_buf_size),hsize_t,size_t); /* Check if there is any point in reading the data from the file */ if(dset_contig->sieve_size>size) { /* Read the new sieve buffer */ if (H5F_block_read(file, H5FD_MEM_DRAW, dset_contig->sieve_loc, dset_contig->sieve_size, io_info->dxpl_id, dset_contig->sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "block read failed") } /* end if */ /* Grab the data out of the buffer (must be first piece of data in buffer ) */ HDmemcpy(dset_contig->sieve_buf,buf,size); /* Set sieve buffer dirty flag */ dset_contig->sieve_dirty=1; /* Stash local copies of these values */ sieve_start=dset_contig->sieve_loc; sieve_size=dset_contig->sieve_size; sieve_end=sieve_start+sieve_size; } /* end else */ } /* end if */ else { /* Compute end of sequence to retrieve */ contig_end=addr+size-1; /* If entire write is within the sieve buffer, write it to the buffer */ if(addr>=sieve_start && contig_endsieve_buf+(addr-sieve_start); /* Put the data into the sieve buffer */ HDmemcpy(base_sieve_buf,buf,size); /* Set sieve buffer dirty flag */ dset_contig->sieve_dirty=1; } /* end if */ /* Entire request is not within this data sieve buffer */ else { /* Check if we can actually hold the I/O request in the sieve buffer */ if(size>dset_contig->sieve_buf_size) { /* Check for any overlap with the current sieve buffer */ if((sieve_start>=addr && sieve_start<(contig_end+1)) || ((sieve_end-1)>=addr && (sieve_end-1)<(contig_end+1))) { /* Flush the sieve buffer, if it's dirty */ if(dset_contig->sieve_dirty) { /* Write to file */ if (H5F_block_write(file, H5FD_MEM_DRAW, sieve_start, sieve_size, io_info->dxpl_id, dset_contig->sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed") /* Reset sieve buffer dirty flag */ dset_contig->sieve_dirty=0; } /* end if */ /* Force the sieve buffer to be re-read the next time */ dset_contig->sieve_loc=HADDR_UNDEF; dset_contig->sieve_size=0; } /* end if */ /* Write directly from the user's buffer */ if (H5F_block_write(file, H5FD_MEM_DRAW, addr, size, io_info->dxpl_id, buf)<0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed") } /* end if */ /* Element size fits within the buffer size */ else { /* Check if it is possible to (exactly) prepend or append to existing (dirty) sieve buffer */ if(((addr+size)==sieve_start || addr==sieve_end) && (size+sieve_size)<=dset_contig->sieve_buf_size && dset_contig->sieve_dirty) { /* Prepend to existing sieve buffer */ if((addr+size)==sieve_start) { /* Move existing sieve information to correct location */ HDmemmove(dset_contig->sieve_buf+size,dset_contig->sieve_buf,dset_contig->sieve_size); /* Copy in new information (must be first in sieve buffer) */ HDmemcpy(dset_contig->sieve_buf,buf,size); /* Adjust sieve location */ dset_contig->sieve_loc=addr; } /* end if */ /* Append to existing sieve buffer */ else { /* Copy in new information */ HDmemcpy(dset_contig->sieve_buf+sieve_size,buf,size); } /* end else */ /* Adjust sieve size */ dset_contig->sieve_size += size; /* Update local copies of sieve information */ sieve_start=dset_contig->sieve_loc; sieve_size=dset_contig->sieve_size; sieve_end=sieve_start+sieve_size; } /* end if */ /* Can't add the new data onto the existing sieve buffer */ else { /* Flush the sieve buffer if it's dirty */ if(dset_contig->sieve_dirty) { /* Write to file */ if (H5F_block_write(file, H5FD_MEM_DRAW, sieve_start, sieve_size, io_info->dxpl_id, dset_contig->sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed") /* Reset sieve buffer dirty flag */ dset_contig->sieve_dirty=0; } /* end if */ /* Determine the new sieve buffer size & location */ dset_contig->sieve_loc=addr; /* Make certain we don't read off the end of the file */ if (HADDR_UNDEF==(abs_eoa=H5F_get_eoa(file))) HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, FAIL, "unable to determine file size") /* Adjust absolute EOA address to relative EOA address */ rel_eoa=abs_eoa-H5F_get_base_addr(file); /* Only need this when resizing sieve buffer */ max_data=store_contig->dset_size-dset_offset_arr[u]; /* Compute the size of the sieve buffer */ /* Don't read off the end of the file, don't read past the end of the data element and don't read more than the buffer size */ H5_ASSIGN_OVERFLOW(dset_contig->sieve_size,MIN3(rel_eoa-dset_contig->sieve_loc,max_data,dset_contig->sieve_buf_size),hsize_t,size_t); /* Update local copies of sieve information */ sieve_start=dset_contig->sieve_loc; sieve_size=dset_contig->sieve_size; sieve_end=sieve_start+sieve_size; /* Check if there is any point in reading the data from the file */ if(dset_contig->sieve_size>size) { /* Read the new sieve buffer */ if (H5F_block_read(file, H5FD_MEM_DRAW, dset_contig->sieve_loc, dset_contig->sieve_size, io_info->dxpl_id, dset_contig->sieve_buf)<0) HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "block read failed") } /* end if */ /* Grab the data out of the buffer (must be first piece of data in buffer ) */ HDmemcpy(dset_contig->sieve_buf,buf,size); /* Set sieve buffer dirty flag */ dset_contig->sieve_dirty=1; } /* end else */ } /* end else */ } /* end else */ } /* end else */ /* Update memory information */ mem_len_arr[v]-=size; mem_offset_arr[v]+=size; if(mem_len_arr[v]==0) v++; /* Update file information */ dset_len_arr[u]-=size; dset_offset_arr[u]+=size; if(dset_len_arr[u]==0) u++; /* Increment number of bytes copied */ total_size+=size; } /* end for */ } /* end if */ else { /* Work through all the sequences */ for(u=*dset_curr_seq, v=*mem_curr_seq; udset_addr+dset_offset_arr[u]; /* Compute offset in memory */ buf = (const unsigned char *)_buf + mem_offset_arr[v]; /* Write data */ if (H5F_block_write(file, H5FD_MEM_DRAW, addr, size, io_info->dxpl_id, buf)<0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed") /* Update memory information */ mem_len_arr[v]-=size; mem_offset_arr[v]+=size; if(mem_len_arr[v]==0) v++; /* Update file information */ dset_len_arr[u]-=size; dset_offset_arr[u]+=size; if(dset_len_arr[u]==0) u++; /* Increment number of bytes copied */ total_size+=size; } /* end for */ } /* end else */ /* Update current sequence vectors */ *dset_curr_seq=u; *mem_curr_seq=v; /* Set return value */ H5_ASSIGN_OVERFLOW(ret_value,total_size,size_t,ssize_t); done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D_contig_writevv() */ /*------------------------------------------------------------------------- * Function: H5D_contig_copy * * Purpose: Copy contiguous storage raw data from SRC file to DST file. * * Return: Non-negative on success, negative on failure. * * Programmer: Quincey Koziol * Monday, November 21, 2005 * * Modifier: Peter Cao * Saturday, January 07, 2006 * Add case to deal with compressed variable length datasets *------------------------------------------------------------------------- */ herr_t H5D_contig_copy(H5F_t *f_src, const H5O_layout_t *layout_src, H5F_t *f_dst, H5O_layout_t *layout_dst, H5T_t *dt_src, H5O_copy_t *cpy_info, hid_t dxpl_id) { haddr_t addr_src; /* File offset in source dataset */ haddr_t addr_dst; /* File offset in destination dataset */ H5T_path_t *tpath_src_mem = NULL, *tpath_mem_dst = NULL; /* Datatype conversion paths */ H5T_t *dt_dst = NULL; /* Destination datatype */ H5T_t *dt_mem = NULL; /* Memory datatype */ hid_t tid_src = -1; /* Datatype ID for source datatype */ hid_t tid_dst = -1; /* Datatype ID for destination datatype */ hid_t tid_mem = -1; /* Datatype ID for memory datatype */ size_t src_dt_size = 0; /* Source datatype size */ size_t mem_dt_size = 0; /* Memory datatype size */ size_t dst_dt_size = 0; /* Destination datatype size */ size_t max_dt_size; /* Max. datatype size */ size_t nelmts = 0; /* Number of elements in buffer */ size_t src_nbytes; /* Number of bytes to read from source */ size_t mem_nbytes; /* Number of bytes to convert in memory */ size_t dst_nbytes; /* Number of bytes to write to destination */ hsize_t total_src_nbytes; /* Total number of bytes to copy */ size_t buf_size; /* Size of copy buffer */ void *buf = NULL; /* Buffer for copying data */ void *bkg = NULL; /* Temporary buffer for copying data */ void *reclaim_buf = NULL; /* Buffer for reclaiming data */ H5S_t *buf_space = NULL; /* Dataspace describing buffer */ hid_t buf_sid = -1; /* ID for buffer dataspace */ hsize_t buf_dim; /* Dimension for buffer */ hbool_t is_vlen = FALSE; /* Flag to indicate that VL type conversion should occur */ hbool_t fix_ref = FALSE; /* Flag to indicate that ref values should be fixed */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5D_contig_copy, FAIL) /* Check args */ HDassert(f_src); HDassert(layout_src && H5D_CONTIGUOUS == layout_src->type); HDassert(f_dst); HDassert(layout_dst && H5D_CONTIGUOUS == layout_dst->type); HDassert(dt_src); /* Allocate space for destination raw data */ if(H5D_contig_create(f_dst, dxpl_id, layout_dst) < 0) HGOTO_ERROR(H5E_IO, H5E_CANTINIT, FAIL, "unable to allocate contiguous storage") /* Set up number of bytes to copy, and initial buffer size */ /* (actually use the destination size, which has been fixed up, if necessary) */ total_src_nbytes = layout_dst->u.contig.size; H5_CHECK_OVERFLOW(total_src_nbytes, hsize_t, size_t); buf_size = MIN(H5D_TEMP_BUF_SIZE, (size_t)total_src_nbytes); /* Create datatype ID for src datatype. We may or may not use this ID, * but this ensures that the src datatype will be freed. */ if((tid_src = H5I_register(H5I_DATATYPE, dt_src)) < 0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTREGISTER, FAIL, "unable to register source file datatype") /* If there's a VLEN source datatype, set up type conversion information */ if(H5T_detect_class(dt_src, H5T_VLEN) > 0) { /* create a memory copy of the variable-length datatype */ if(NULL == (dt_mem = H5T_copy(dt_src, H5T_COPY_TRANSIENT))) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to copy") if((tid_mem = H5I_register(H5I_DATATYPE, dt_mem)) < 0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTREGISTER, FAIL, "unable to register memory datatype") /* create variable-length datatype at the destinaton file */ if(NULL == (dt_dst = H5T_copy(dt_src, H5T_COPY_TRANSIENT))) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to copy") if(H5T_set_loc(dt_dst, f_dst, H5T_LOC_DISK) < 0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "cannot mark datatype on disk") if((tid_dst = H5I_register(H5I_DATATYPE, dt_dst)) < 0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTREGISTER, FAIL, "unable to register destination file datatype") /* Set up the conversion functions */ if(NULL == (tpath_src_mem = H5T_path_find(dt_src, dt_mem, NULL, NULL, dxpl_id, FALSE))) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to convert between src and mem datatypes") if(NULL == (tpath_mem_dst = H5T_path_find(dt_mem, dt_dst, NULL, NULL, dxpl_id, FALSE))) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to convert between mem and dst datatypes") /* Determine largest datatype size */ if(0 == (src_dt_size = H5T_get_size(dt_src))) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to determine datatype size") if(0 == (mem_dt_size = H5T_get_size(dt_mem))) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to determine datatype size") max_dt_size = MAX(src_dt_size, mem_dt_size); if(0 == (dst_dt_size = H5T_get_size(dt_dst))) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to determine datatype size") max_dt_size = MAX(max_dt_size, dst_dt_size); /* Set maximum number of whole elements that fit in buffer */ if(0 == (nelmts = buf_size / max_dt_size)) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "element size too large") /* Set the number of bytes to transfer */ src_nbytes = nelmts * src_dt_size; dst_nbytes = nelmts * dst_dt_size; mem_nbytes = nelmts * mem_dt_size; /* Adjust buffer size to be multiple of elements */ buf_size = nelmts * max_dt_size; /* Create dataspace for number of elements in buffer */ buf_dim = nelmts; /* Create the space and set the initial extent */ if(NULL == (buf_space = H5S_create_simple((unsigned)1, &buf_dim, NULL))) HGOTO_ERROR(H5E_DATASPACE, H5E_CANTCREATE, FAIL, "can't create simple dataspace") /* Atomize */ if((buf_sid = H5I_register(H5I_DATASPACE, buf_space)) < 0) { H5S_close(buf_space); HGOTO_ERROR(H5E_ATOM, H5E_CANTREGISTER, FAIL, "unable to register dataspace ID") } /* end if */ /* Set flag to do type conversion */ is_vlen = TRUE; } /* end if */ else { /* Check for reference datatype */ if(H5T_get_class(dt_src, FALSE) == H5T_REFERENCE) { /* Need to fix values of references when copying across files */ if(f_src != f_dst) fix_ref = TRUE; } /* end if */ /* Set the number of bytes to read & write to the buffer size */ src_nbytes = dst_nbytes = mem_nbytes = buf_size; } /* end else */ /* Allocate space for copy buffer */ HDassert(buf_size); if(NULL == (buf = H5FL_BLK_MALLOC(type_conv, buf_size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for copy buffer") /* Need extra buffer for datatype conversions, to prevent stranding/leaking memory */ if(is_vlen || fix_ref) { if(NULL == (reclaim_buf = H5FL_BLK_MALLOC(type_conv, buf_size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for copy buffer") /* allocate temporary bkg buff for data conversion */ if(NULL == (bkg = H5FL_BLK_MALLOC(type_conv, buf_size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for copy buffer") } /* end if */ /* Loop over copying data */ addr_src = layout_src->u.contig.addr; addr_dst = layout_dst->u.contig.addr; while(total_src_nbytes > 0) { /* Check if we should reduce the number of bytes to transfer */ if(total_src_nbytes < src_nbytes) { /* Adjust bytes to transfer */ src_nbytes = (size_t)total_src_nbytes; /* Adjust dataspace describing buffer */ if(is_vlen) { /* Adjust destination & memory bytes to transfer */ nelmts = src_nbytes / src_dt_size; dst_nbytes = nelmts * dst_dt_size; mem_nbytes = nelmts * mem_dt_size; /* Adjust size of buffer's dataspace dimension */ buf_dim = nelmts; /* Adjust size of buffer's dataspace */ if(H5S_set_extent_real(buf_space, &buf_dim) < 0) HGOTO_ERROR(H5E_DATASPACE, H5E_CANTSET, FAIL, "unable to change buffer dataspace size") } /* end if */ else /* Adjust destination & memory bytes to transfer */ dst_nbytes = mem_nbytes = src_nbytes; } /* end if */ /* Read raw data from source file */ if(H5F_block_read(f_src, H5FD_MEM_DRAW, addr_src, src_nbytes, H5P_DATASET_XFER_DEFAULT, buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_READERROR, FAIL, "unable to read raw data") /* Perform datatype conversion, if necessary */ if(is_vlen) { /* Convert from source file to memory */ if(H5T_convert(tpath_src_mem, tid_src, tid_mem, nelmts, (size_t)0, (size_t)0, buf, NULL, dxpl_id) < 0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "datatype conversion failed") /* Copy into another buffer, to reclaim memory later */ HDmemcpy(reclaim_buf, buf, mem_nbytes); /* Set background buffer to all zeros */ HDmemset(bkg, 0, buf_size); /* Convert from memory to destination file */ if(H5T_convert(tpath_mem_dst, tid_mem, tid_dst, nelmts, (size_t)0, (size_t)0, buf, bkg, dxpl_id) < 0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "datatype conversion failed") /* Reclaim space from variable length data */ if(H5D_vlen_reclaim(tid_mem, buf_space, H5P_DATASET_XFER_DEFAULT, reclaim_buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_BADITER, FAIL, "unable to reclaim variable-length data") } /* end if */ else if(fix_ref) { /* Check for expanding references */ if(cpy_info->expand_ref) { size_t ref_count; /* Determine # of reference elements to copy */ ref_count = src_nbytes / H5T_get_size(dt_src); /* Copy the reference elements */ if(H5O_copy_expand_ref(f_src, buf, dxpl_id, f_dst, bkg, ref_count, H5T_get_ref_type(dt_src), cpy_info) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTCOPY, FAIL, "unable to copy reference attribute") /* After fix ref, copy the new reference elements to the buffer to write out */ HDmemcpy(buf, bkg, buf_size); } /* end if */ else /* Reset value to zero */ HDmemset(buf, 0, src_nbytes); } /* end if */ /* Write raw data to destination file */ if(H5F_block_write(f_dst, H5FD_MEM_DRAW, addr_dst, dst_nbytes, H5P_DATASET_XFER_DEFAULT, buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "unable to write raw data") /* Adjust loop variables */ addr_src += src_nbytes; addr_dst += dst_nbytes; total_src_nbytes -= src_nbytes; } /* end while */ done: if(buf_sid > 0) if(H5I_dec_ref(buf_sid) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTFREE, FAIL, "Can't decrement temporary dataspace ID") if(tid_src > 0) if(H5I_dec_ref(tid_src) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTFREE, FAIL, "Can't decrement temporary datatype ID") if(tid_dst > 0) if(H5I_dec_ref(tid_dst) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTFREE, FAIL, "Can't decrement temporary datatype ID") if(tid_mem > 0) if(H5I_dec_ref(tid_mem) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTFREE, FAIL, "Can't decrement temporary datatype ID") if(buf) H5FL_BLK_FREE(type_conv, buf); if(reclaim_buf) H5FL_BLK_FREE(type_conv, reclaim_buf); if(bkg) H5FL_BLK_FREE(type_conv, bkg); FUNC_LEAVE_NOAPI(ret_value) } /* end H5D_contig_copy() */