/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /****************/ /* Module Setup */ /****************/ #define H5D_PACKAGE /*suppress error about including H5Dpkg */ /***********/ /* Headers */ /***********/ #include "H5private.h" /* Generic Functions */ #include "H5Dpkg.h" /* Dataset functions */ #include "H5Eprivate.h" /* Error handling */ #include "H5FLprivate.h" /* Free Lists */ #include "H5Iprivate.h" /* IDs */ #include "H5MMprivate.h" /* Memory management */ #include "H5Sprivate.h" /* Dataspace */ #ifdef H5_HAVE_PARALLEL /* Remove this if H5R_DATASET_REGION is no longer used in this file */ #include "H5Rpublic.h" #endif /*H5_HAVE_PARALLEL*/ /****************/ /* Local Macros */ /****************/ /******************/ /* Local Typedefs */ /******************/ /********************/ /* Local Prototypes */ /********************/ /* Internal I/O routines */ static herr_t H5D__write(H5D_t *dataset, hid_t mem_type_id, const H5S_t *mem_space, const H5S_t *file_space, hid_t dset_xfer_plist, const void *buf); static herr_t H5D__pre_write(hid_t dset_id, hid_t mem_type_id, hid_t mem_space_id, hid_t file_space_id, hid_t dxpl_id, const void *buf); /* Setup/teardown routines */ static herr_t H5D__ioinfo_init(H5D_t *dset, #ifndef H5_HAVE_PARALLEL const #endif /* H5_HAVE_PARALLEL */ H5D_dxpl_cache_t *dxpl_cache, hid_t dxpl_id, const H5D_type_info_t *type_info, H5D_storage_t *store, H5D_io_info_t *io_info); static herr_t H5D__typeinfo_init(const H5D_t *dset, const H5D_dxpl_cache_t *dxpl_cache, hid_t dxpl_id, hid_t mem_type_id, hbool_t do_write, H5D_type_info_t *type_info); #ifdef H5_HAVE_PARALLEL static herr_t H5D__ioinfo_adjust(H5D_io_info_t *io_info, const H5D_t *dset, hid_t dxpl_id, const H5S_t *file_space, const H5S_t *mem_space, const H5D_type_info_t *type_info, const H5D_chunk_map_t *fm); static herr_t H5D__ioinfo_term(H5D_io_info_t *io_info); #endif /* H5_HAVE_PARALLEL */ static herr_t H5D__typeinfo_term(const H5D_type_info_t *type_info); /*********************/ /* Package Variables */ /*********************/ /*******************/ /* Local Variables */ /*******************/ /* Declare a free list to manage blocks of type conversion data */ H5FL_BLK_DEFINE(type_conv); /*------------------------------------------------------------------------- * Function: H5Dread * * Purpose: Reads (part of) a DSET from the file into application * memory BUF. The part of the dataset to read is defined with * MEM_SPACE_ID and FILE_SPACE_ID. The data points are * converted from their file type to the MEM_TYPE_ID specified. * Additional miscellaneous data transfer properties can be * passed to this function with the PLIST_ID argument. * * The FILE_SPACE_ID can be the constant H5S_ALL which indicates * that the entire file data space is to be referenced. * * The MEM_SPACE_ID can be the constant H5S_ALL in which case * the memory data space is the same as the file data space * defined when the dataset was created. * * The number of elements in the memory data space must match * the number of elements in the file data space. * * The PLIST_ID can be the constant H5P_DEFAULT in which * case the default data transfer properties are used. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Thursday, December 4, 1997 * *------------------------------------------------------------------------- */ herr_t H5Dread(hid_t dset_id, hid_t mem_type_id, hid_t mem_space_id, hid_t file_space_id, hid_t plist_id, void *buf/*out*/) { H5D_t *dset = NULL; const H5S_t *mem_space = NULL; const H5S_t *file_space = NULL; herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_API(FAIL) H5TRACE6("e", "iiiiix", dset_id, mem_type_id, mem_space_id, file_space_id, plist_id, buf); /* check arguments */ if(NULL == (dset = (H5D_t *)H5I_object_verify(dset_id, H5I_DATASET))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a dataset") if(NULL == dset->oloc.file) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a dataset") if(mem_space_id < 0 || file_space_id < 0) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space") if(H5S_ALL != mem_space_id) { if(NULL == (mem_space = (const H5S_t *)H5I_object_verify(mem_space_id, H5I_DATASPACE))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space") /* Check for valid selection */ if(H5S_SELECT_VALID(mem_space) != TRUE) HGOTO_ERROR(H5E_DATASPACE, H5E_BADRANGE, FAIL, "selection+offset not within extent") } /* end if */ if(H5S_ALL != file_space_id) { if(NULL == (file_space = (const H5S_t *)H5I_object_verify(file_space_id, H5I_DATASPACE))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space") /* Check for valid selection */ if(H5S_SELECT_VALID(file_space) != TRUE) HGOTO_ERROR(H5E_DATASPACE, H5E_BADRANGE, FAIL, "selection+offset not within extent") } /* end if */ /* Get the default dataset transfer property list if the user didn't provide one */ if (H5P_DEFAULT == plist_id) plist_id= H5P_DATASET_XFER_DEFAULT; else if(TRUE != H5P_isa_class(plist_id, H5P_DATASET_XFER)) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not xfer parms") /* read raw data */ if(H5D__read(dset, mem_type_id, mem_space, file_space, plist_id, buf/*out*/) < 0) HGOTO_ERROR(H5E_DATASET, H5E_READERROR, FAIL, "can't read data") done: FUNC_LEAVE_API(ret_value) } /* end H5Dread() */ /*------------------------------------------------------------------------- * Function: H5Dwrite * * Purpose: Writes (part of) a DSET from application memory BUF to the * file. The part of the dataset to write is defined with the * MEM_SPACE_ID and FILE_SPACE_ID arguments. The data points * are converted from their current type (MEM_TYPE_ID) to their * file datatype. Additional miscellaneous data transfer * properties can be passed to this function with the * PLIST_ID argument. * * The FILE_SPACE_ID can be the constant H5S_ALL which indicates * that the entire file data space is to be referenced. * * The MEM_SPACE_ID can be the constant H5S_ALL in which case * the memory data space is the same as the file data space * defined when the dataset was created. * * The number of elements in the memory data space must match * the number of elements in the file data space. * * The PLIST_ID can be the constant H5P_DEFAULT in which * case the default data transfer properties are used. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Thursday, December 4, 1997 * *------------------------------------------------------------------------- */ herr_t H5Dwrite(hid_t dset_id, hid_t mem_type_id, hid_t mem_space_id, hid_t file_space_id, hid_t dxpl_id, const void *buf) { herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_API(FAIL) H5TRACE6("e", "iiiii*x", dset_id, mem_type_id, mem_space_id, file_space_id, dxpl_id, buf); if(!dset_id) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a dataset") if(H5D__pre_write(dset_id, mem_type_id, mem_space_id, file_space_id, dxpl_id, buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "can't prepare for writing data") done: FUNC_LEAVE_API(ret_value) } /* end H5Dwrite() */ /*------------------------------------------------------------------------- * Function: H5D__pre_write * * Purpose: Preparation for writing data. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * 2 November 2012 * *------------------------------------------------------------------------- */ static herr_t H5D__pre_write(hid_t dset_id, hid_t mem_type_id, hid_t mem_space_id, hid_t file_space_id, hid_t dxpl_id, const void *buf) { H5D_t *dset = NULL; H5P_genplist_t *plist; /* Property list pointer */ hbool_t direct_write = FALSE; herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_STATIC /* check arguments */ if(NULL == (dset = (H5D_t *)H5I_object_verify(dset_id, H5I_DATASET))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a dataset") if(NULL == dset->oloc.file) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file") /* Get the default dataset transfer property list if the user didn't provide one */ if(H5P_DEFAULT == dxpl_id) dxpl_id= H5P_DATASET_XFER_DEFAULT; else if(TRUE != H5P_isa_class(dxpl_id, H5P_DATASET_XFER)) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not xfer parms") /* Get the dataset transfer property list */ if(NULL == (plist = (H5P_genplist_t *)H5I_object(dxpl_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a dataset transfer property list") /* Retrieve the 'direct write' flag */ if(H5P_get(plist, H5D_XFER_DIRECT_CHUNK_WRITE_FLAG_NAME, &direct_write) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "error getting flag for direct chunk write") /* Direct chunk write */ if(direct_write) { uint32_t direct_filters; hsize_t *direct_offset; uint32_t direct_datasize; int ndims = 0; hsize_t dims[H5O_LAYOUT_NDIMS]; hsize_t internal_offset[H5O_LAYOUT_NDIMS]; int i; if(H5D_CHUNKED != dset->shared->layout.type) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a chunked dataset") /* Retrieve parameters for direct chunk write */ if(H5P_get(plist, H5D_XFER_DIRECT_CHUNK_WRITE_FILTERS_NAME, &direct_filters) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "error getting filter info for direct chunk write") if(H5P_get(plist, H5D_XFER_DIRECT_CHUNK_WRITE_OFFSET_NAME, &direct_offset) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "error getting offset info for direct chunk write") if(H5P_get(plist, H5D_XFER_DIRECT_CHUNK_WRITE_DATASIZE_NAME, &direct_datasize) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "error getting data size for direct chunk write") /* The library's chunking code requires the offset terminates with a zero. So transfer the * offset array to an internal offset array */ if((ndims = H5S_get_simple_extent_dims(dset->shared->space, dims, NULL)) < 0) HGOTO_ERROR(H5E_DATASPACE, H5E_CANTGET, FAIL, "can't retrieve dataspace extent dims") for(i = 0; i < ndims; i++) { /* Make sure the offset doesn't exceed the dataset's dimensions */ if(direct_offset[i] > dims[i]) HGOTO_ERROR(H5E_DATASPACE, H5E_BADTYPE, FAIL, "offset exceeds dimensions of dataset") /* Make sure the offset fall right on a chunk's boundary */ if(direct_offset[i] % dset->shared->layout.u.chunk.dim[i]) HGOTO_ERROR(H5E_DATASPACE, H5E_BADTYPE, FAIL, "offset doesn't fall on chunks's boundary") internal_offset[i] = direct_offset[i]; } /* end for */ /* Terminate the offset with a zero */ internal_offset[ndims] = 0; /* write raw data */ if(H5D__chunk_direct_write(dset, dxpl_id, direct_filters, internal_offset, direct_datasize, buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "can't write chunk directly") } /* end if */ else { /* Normal write */ const H5S_t *mem_space = NULL; const H5S_t *file_space = NULL; if(mem_space_id < 0 || file_space_id < 0) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space") if(H5S_ALL != mem_space_id) { if(NULL == (mem_space = (const H5S_t *)H5I_object_verify(mem_space_id, H5I_DATASPACE))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space") /* Check for valid selection */ if(H5S_SELECT_VALID(mem_space) != TRUE) HGOTO_ERROR(H5E_DATASPACE, H5E_BADRANGE, FAIL, "memory selection+offset not within extent") } /* end if */ if(H5S_ALL != file_space_id) { if(NULL == (file_space = (const H5S_t *)H5I_object_verify(file_space_id, H5I_DATASPACE))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space") /* Check for valid selection */ if(H5S_SELECT_VALID(file_space) != TRUE) HGOTO_ERROR(H5E_DATASPACE, H5E_BADRANGE, FAIL, "file selection+offset not within extent") } /* end if */ /* write raw data */ if(H5D__write(dset, mem_type_id, mem_space, file_space, dxpl_id, buf) < 0) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "can't write data") } /* end else */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__pre_write() */ /*------------------------------------------------------------------------- * Function: H5D__read * * Purpose: Reads (part of) a DATASET into application memory BUF. See * H5Dread() for complete details. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Thursday, December 4, 1997 * *------------------------------------------------------------------------- */ herr_t H5D__read(H5D_t *dataset, hid_t mem_type_id, const H5S_t *mem_space, const H5S_t *file_space, hid_t dxpl_id, void *buf/*out*/) { H5D_chunk_map_t fm; /* Chunk file<->memory mapping */ H5D_io_info_t io_info; /* Dataset I/O info */ H5D_type_info_t type_info; /* Datatype info for operation */ hbool_t type_info_init = FALSE; /* Whether the datatype info has been initialized */ H5S_t * projected_mem_space = NULL; /* If not NULL, ptr to dataspace containing a */ /* projection of the supplied mem_space to a new */ /* data space with rank equal to that of */ /* file_space. */ /* */ /* This field is only used if */ /* H5S_select_shape_same() returns TRUE when */ /* comparing the mem_space and the data_space, */ /* and the mem_space have different rank. */ /* */ /* Note that if this variable is used, the */ /* projected mem space must be discarded at the */ /* end of the function to avoid a memory leak. */ H5D_storage_t store; /*union of EFL and chunk pointer in file space */ hssize_t snelmts; /*total number of elmts (signed) */ hsize_t nelmts; /*total number of elmts */ #ifdef H5_HAVE_PARALLEL hbool_t io_info_init = FALSE; /* Whether the I/O info has been initialized */ #endif /*H5_HAVE_PARALLEL*/ hbool_t io_op_init = FALSE; /* Whether the I/O op has been initialized */ H5D_dxpl_cache_t _dxpl_cache; /* Data transfer property cache buffer */ H5D_dxpl_cache_t *dxpl_cache = &_dxpl_cache; /* Data transfer property cache */ char fake_char; /* Temporary variable for NULL buffer pointers */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_PACKAGE /* check args */ HDassert(dataset && dataset->oloc.file); if(!file_space) file_space = dataset->shared->space; if(!mem_space) mem_space = file_space; if((snelmts = H5S_GET_SELECT_NPOINTS(mem_space)) < 0) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "dst dataspace has invalid selection") H5_ASSIGN_OVERFLOW(nelmts,snelmts,hssize_t,hsize_t); /* Fill the DXPL cache values for later use */ if(H5D__get_dxpl_cache(dxpl_id, &dxpl_cache) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't fill dxpl cache") /* Set up datatype info for operation */ if(H5D__typeinfo_init(dataset, dxpl_cache, dxpl_id, mem_type_id, FALSE, &type_info) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to set up type info") type_info_init = TRUE; #ifdef H5_HAVE_PARALLEL /* Collective access is not permissible without a MPI based VFD */ if(dxpl_cache->xfer_mode == H5FD_MPIO_COLLECTIVE && !IS_H5FD_MPI(dataset->oloc.file)) HGOTO_ERROR(H5E_DATASET, H5E_UNSUPPORTED, FAIL, "collective access for MPI-based drivers only") #endif /*H5_HAVE_PARALLEL*/ /* Make certain that the number of elements in each selection is the same */ if(nelmts != (hsize_t)H5S_GET_SELECT_NPOINTS(file_space)) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "src and dest data spaces have different sizes") /* Check for a NULL buffer, after the H5S_ALL dataspace selection has been handled */ if(NULL == buf) { /* Check for any elements selected (which is invalid) */ if(nelmts > 0) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "no output buffer") /* If the buffer is nil, and 0 element is selected, make a fake buffer. * This is for some MPI package like ChaMPIon on NCSA's tungsten which * doesn't support this feature. */ buf = &fake_char; } /* end if */ /* Make sure that both selections have their extents set */ if(!(H5S_has_extent(file_space))) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "file dataspace does not have extent set") if(!(H5S_has_extent(mem_space))) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "memory dataspace does not have extent set") /* H5S_select_shape_same() has been modified to accept topologically identical * selections with different rank as having the same shape (if the most * rapidly changing coordinates match up), but the I/O code still has * difficulties with the notion. * * To solve this, we check to see if H5S_select_shape_same() returns true, * and if the ranks of the mem and file spaces are different. If the are, * construct a new mem space that is equivalent to the old mem space, and * use that instead. * * Note that in general, this requires us to touch up the memory buffer as * well. */ if(TRUE == H5S_select_shape_same(mem_space, file_space) && H5S_GET_EXTENT_NDIMS(mem_space) != H5S_GET_EXTENT_NDIMS(file_space)) { void *adj_buf = NULL; /* Pointer to the location in buf corresponding */ /* to the beginning of the projected mem space. */ /* Attempt to construct projected dataspace for memory dataspace */ if(H5S_select_construct_projection(mem_space, &projected_mem_space, (unsigned)H5S_GET_EXTENT_NDIMS(file_space), buf, (const void **)&adj_buf, type_info.dst_type_size) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to construct projected memory dataspace") HDassert(projected_mem_space); HDassert(adj_buf); /* Switch to using projected memory dataspace & adjusted buffer */ mem_space = projected_mem_space; buf = adj_buf; } /* end if */ /* Retrieve dataset properties */ /* */ /* If space hasn't been allocated and not using external storage, * return fill value to buffer if fill time is upon allocation, or * do nothing if fill time is never. If the dataset is compact and * fill time is NEVER, there is no way to tell whether part of data * has been overwritten. So just proceed in reading. */ if(nelmts > 0 && dataset->shared->dcpl_cache.efl.nused == 0 && !(*dataset->shared->layout.ops->is_space_alloc)(&dataset->shared->layout.storage)) { H5D_fill_value_t fill_status; /* Whether/How the fill value is defined */ /* Retrieve dataset's fill-value properties */ if(H5P_is_fill_value_defined(&dataset->shared->dcpl_cache.fill, &fill_status) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't tell if fill value defined") /* Should be impossible, but check anyway... */ if(fill_status == H5D_FILL_VALUE_UNDEFINED && (dataset->shared->dcpl_cache.fill.fill_time == H5D_FILL_TIME_ALLOC || dataset->shared->dcpl_cache.fill.fill_time == H5D_FILL_TIME_IFSET)) HGOTO_ERROR(H5E_DATASET, H5E_READERROR, FAIL, "read failed: dataset doesn't exist, no data can be read") /* If we're never going to fill this dataset, just leave the junk in the user's buffer */ if(dataset->shared->dcpl_cache.fill.fill_time == H5D_FILL_TIME_NEVER) HGOTO_DONE(SUCCEED) /* Go fill the user's selection with the dataset's fill value */ if(H5D__fill(dataset->shared->dcpl_cache.fill.buf, dataset->shared->type, buf, type_info.mem_type, mem_space, dxpl_id) < 0) HGOTO_ERROR(H5E_DATASET, H5E_READERROR, FAIL, "filling buf failed") else HGOTO_DONE(SUCCEED) } /* end if */ /* Set up I/O operation */ io_info.op_type = H5D_IO_OP_READ; io_info.u.rbuf = buf; if(H5D__ioinfo_init(dataset, dxpl_cache, dxpl_id, &type_info, &store, &io_info) < 0) HGOTO_ERROR(H5E_DATASET, H5E_UNSUPPORTED, FAIL, "unable to set up I/O operation") #ifdef H5_HAVE_PARALLEL io_info_init = TRUE; #endif /*H5_HAVE_PARALLEL*/ /* Sanity check that space is allocated, if there are elements */ if(nelmts > 0) HDassert((*dataset->shared->layout.ops->is_space_alloc)(&dataset->shared->layout.storage) || dataset->shared->dcpl_cache.efl.nused > 0 || dataset->shared->layout.type == H5D_COMPACT); /* Call storage method's I/O initialization routine */ HDmemset(&fm, 0, sizeof(H5D_chunk_map_t)); if(io_info.layout_ops.io_init && (*io_info.layout_ops.io_init)(&io_info, &type_info, nelmts, file_space, mem_space, &fm) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "can't initialize I/O info") io_op_init = TRUE; #ifdef H5_HAVE_PARALLEL /* Adjust I/O info for any parallel I/O */ if(H5D__ioinfo_adjust(&io_info, dataset, dxpl_id, file_space, mem_space, &type_info, &fm) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to adjust I/O info for parallel I/O") #endif /*H5_HAVE_PARALLEL*/ /* Invoke correct "high level" I/O routine */ if((*io_info.io_ops.multi_read)(&io_info, &type_info, nelmts, file_space, mem_space, &fm) < 0) HGOTO_ERROR(H5E_DATASET, H5E_READERROR, FAIL, "can't read data") done: /* Shut down the I/O op information */ if(io_op_init && io_info.layout_ops.io_term && (*io_info.layout_ops.io_term)(&fm) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTCLOSEOBJ, FAIL, "unable to shut down I/O op info") #ifdef H5_HAVE_PARALLEL /* Shut down io_info struct */ if(io_info_init) if(H5D__ioinfo_term(&io_info) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTCLOSEOBJ, FAIL, "can't shut down io_info") #endif /*H5_HAVE_PARALLEL*/ /* Shut down datatype info for operation */ if(type_info_init && H5D__typeinfo_term(&type_info) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTCLOSEOBJ, FAIL, "unable to shut down type info") /* discard projected mem space if it was created */ if(NULL != projected_mem_space) if(H5S_close(projected_mem_space) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTCLOSEOBJ, FAIL, "unable to shut down projected memory dataspace") FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__read() */ /*------------------------------------------------------------------------- * Function: H5D__write * * Purpose: Writes (part of) a DATASET to a file from application memory * BUF. See H5Dwrite() for complete details. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Thursday, December 4, 1997 * *------------------------------------------------------------------------- */ static herr_t H5D__write(H5D_t *dataset, hid_t mem_type_id, const H5S_t *mem_space, const H5S_t *file_space, hid_t dxpl_id, const void *buf) { H5D_chunk_map_t fm; /* Chunk file<->memory mapping */ H5D_io_info_t io_info; /* Dataset I/O info */ H5D_type_info_t type_info; /* Datatype info for operation */ hbool_t type_info_init = FALSE; /* Whether the datatype info has been initialized */ H5S_t * projected_mem_space = NULL; /* If not NULL, ptr to dataspace containing a */ /* projection of the supplied mem_space to a new */ /* data space with rank equal to that of */ /* file_space. */ /* */ /* This field is only used if */ /* H5S_select_shape_same() returns TRUE when */ /* comparing the mem_space and the data_space, */ /* and the mem_space have different rank. */ /* */ /* Note that if this variable is used, the */ /* projected mem space must be discarded at the */ /* end of the function to avoid a memory leak. */ H5D_storage_t store; /*union of EFL and chunk pointer in file space */ hssize_t snelmts; /*total number of elmts (signed) */ hsize_t nelmts; /*total number of elmts */ #ifdef H5_HAVE_PARALLEL hbool_t io_info_init = FALSE; /* Whether the I/O info has been initialized */ #endif /*H5_HAVE_PARALLEL*/ hbool_t io_op_init = FALSE; /* Whether the I/O op has been initialized */ H5D_dxpl_cache_t _dxpl_cache; /* Data transfer property cache buffer */ H5D_dxpl_cache_t *dxpl_cache = &_dxpl_cache; /* Data transfer property cache */ char fake_char; /* Temporary variable for NULL buffer pointers */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_STATIC /* check args */ HDassert(dataset && dataset->oloc.file); /* All filters in the DCPL must have encoding enabled. */ if(!dataset->shared->checked_filters) { if(H5Z_can_apply(dataset->shared->dcpl_id, dataset->shared->type_id) < 0) HGOTO_ERROR(H5E_PLINE, H5E_CANAPPLY, FAIL, "can't apply filters") dataset->shared->checked_filters = TRUE; } /* end if */ /* Check if we are allowed to write to this file */ if(0 == (H5F_INTENT(dataset->oloc.file) & H5F_ACC_RDWR)) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "no write intent on file") /* Fill the DXPL cache values for later use */ if(H5D__get_dxpl_cache(dxpl_id, &dxpl_cache) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTGET, FAIL, "can't fill dxpl cache") /* Set up datatype info for operation */ if(H5D__typeinfo_init(dataset, dxpl_cache, dxpl_id, mem_type_id, TRUE, &type_info) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to set up type info") type_info_init = TRUE; /* Various MPI based checks */ #ifdef H5_HAVE_PARALLEL if(IS_H5FD_MPI(dataset->oloc.file)) { /* If MPI based VFD is used, no VL datatype support yet. */ /* This is because they use the global heap in the file and we don't */ /* support parallel access of that yet */ if(H5T_detect_class(type_info.mem_type, H5T_VLEN, FALSE) > 0) HGOTO_ERROR(H5E_DATASET, H5E_UNSUPPORTED, FAIL, "Parallel IO does not support writing VL datatypes yet") /* If MPI based VFD is used, no VL datatype support yet. */ /* This is because they use the global heap in the file and we don't */ /* support parallel access of that yet */ /* We should really use H5T_detect_class() here, but it will be difficult * to detect the type of the reference if it is nested... -QAK */ if(H5T_get_class(type_info.mem_type, TRUE) == H5T_REFERENCE && H5T_get_ref_type(type_info.mem_type) == H5R_DATASET_REGION) HGOTO_ERROR(H5E_DATASET, H5E_UNSUPPORTED, FAIL, "Parallel IO does not support writing region reference datatypes yet") /* Can't write to chunked datasets with filters, in parallel */ if(dataset->shared->layout.type == H5D_CHUNKED && dataset->shared->dcpl_cache.pline.nused > 0) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "cannot write to chunked storage with filters in parallel") } /* end if */ else { /* Collective access is not permissible without a MPI based VFD */ if(dxpl_cache->xfer_mode == H5FD_MPIO_COLLECTIVE) HGOTO_ERROR(H5E_DATASET, H5E_UNSUPPORTED, FAIL, "collective access for MPI-based driver only") } /* end else */ #endif /*H5_HAVE_PARALLEL*/ /* Initialize dataspace information */ if(!file_space) file_space = dataset->shared->space; if(!mem_space) mem_space = file_space; if((snelmts = H5S_GET_SELECT_NPOINTS(mem_space)) < 0) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "src dataspace has invalid selection") H5_ASSIGN_OVERFLOW(nelmts, snelmts, hssize_t, hsize_t); /* Make certain that the number of elements in each selection is the same */ if(nelmts != (hsize_t)H5S_GET_SELECT_NPOINTS(file_space)) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "src and dest data spaces have different sizes") /* Check for a NULL buffer, after the H5S_ALL dataspace selection has been handled */ if(NULL == buf) { /* Check for any elements selected (which is invalid) */ if(nelmts > 0) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "no output buffer") /* If the buffer is nil, and 0 element is selected, make a fake buffer. * This is for some MPI package like ChaMPIon on NCSA's tungsten which * doesn't support this feature. */ buf = &fake_char; } /* end if */ /* Make sure that both selections have their extents set */ if(!(H5S_has_extent(file_space))) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "file dataspace does not have extent set") if(!(H5S_has_extent(mem_space))) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "memory dataspace does not have extent set") /* H5S_select_shape_same() has been modified to accept topologically * identical selections with different rank as having the same shape * (if the most rapidly changing coordinates match up), but the I/O * code still has difficulties with the notion. * * To solve this, we check to see if H5S_select_shape_same() returns * true, and if the ranks of the mem and file spaces are different. * If the are, construct a new mem space that is equivalent to the * old mem space, and use that instead. * * Note that in general, this requires us to touch up the memory buffer * as well. */ if(TRUE == H5S_select_shape_same(mem_space, file_space) && H5S_GET_EXTENT_NDIMS(mem_space) != H5S_GET_EXTENT_NDIMS(file_space)) { void *adj_buf = NULL; /* Pointer to the location in buf corresponding */ /* to the beginning of the projected mem space. */ /* Attempt to construct projected dataspace for memory dataspace */ if(H5S_select_construct_projection(mem_space, &projected_mem_space, (unsigned)H5S_GET_EXTENT_NDIMS(file_space), buf, (const void **)&adj_buf, type_info.src_type_size) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to construct projected memory dataspace") HDassert(projected_mem_space); HDassert(adj_buf); /* Switch to using projected memory dataspace & adjusted buffer */ mem_space = projected_mem_space; buf = adj_buf; } /* end if */ /* Retrieve dataset properties */ /* */ /* Allocate data space and initialize it if it hasn't been. */ if(nelmts > 0 && dataset->shared->dcpl_cache.efl.nused == 0 && !(*dataset->shared->layout.ops->is_space_alloc)(&dataset->shared->layout.storage)) { hssize_t file_nelmts; /* Number of elements in file dataset's dataspace */ hbool_t full_overwrite; /* Whether we are over-writing all the elements */ /* Get the number of elements in file dataset's dataspace */ if((file_nelmts = H5S_GET_EXTENT_NPOINTS(file_space)) < 0) HGOTO_ERROR(H5E_DATASET, H5E_BADVALUE, FAIL, "can't retrieve number of elements in file dataset") /* Always allow fill values to be written if the dataset has a VL datatype */ if(H5T_detect_class(dataset->shared->type, H5T_VLEN, FALSE)) full_overwrite = FALSE; else full_overwrite = (hbool_t)((hsize_t)file_nelmts == nelmts ? TRUE : FALSE); /* Allocate storage */ if(H5D__alloc_storage(dataset, dxpl_id, H5D_ALLOC_WRITE, full_overwrite, NULL) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to initialize storage") } /* end if */ /* Set up I/O operation */ io_info.op_type = H5D_IO_OP_WRITE; io_info.u.wbuf = buf; if(H5D__ioinfo_init(dataset, dxpl_cache, dxpl_id, &type_info, &store, &io_info) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to set up I/O operation") #ifdef H5_HAVE_PARALLEL io_info_init = TRUE; #endif /*H5_HAVE_PARALLEL*/ /* Call storage method's I/O initialization routine */ HDmemset(&fm, 0, sizeof(H5D_chunk_map_t)); if(io_info.layout_ops.io_init && (*io_info.layout_ops.io_init)(&io_info, &type_info, nelmts, file_space, mem_space, &fm) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "can't initialize I/O info") io_op_init = TRUE; #ifdef H5_HAVE_PARALLEL /* Adjust I/O info for any parallel I/O */ if(H5D__ioinfo_adjust(&io_info, dataset, dxpl_id, file_space, mem_space, &type_info, &fm) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to adjust I/O info for parallel I/O") #endif /*H5_HAVE_PARALLEL*/ /* Invoke correct "high level" I/O routine */ if((*io_info.io_ops.multi_write)(&io_info, &type_info, nelmts, file_space, mem_space, &fm) < 0) HGOTO_ERROR(H5E_DATASET, H5E_WRITEERROR, FAIL, "can't write data") #ifdef OLD_WAY /* * This was taken out because it can be called in a parallel program with * independent access, causing the metadata cache to get corrupted. Its been * disabled for all types of access (serial as well as parallel) to make the * modification time consistent for all programs. -QAK * * We should set a value in the dataset's shared information instead and flush * it to the file when the dataset is being closed. -QAK */ /* * Update modification time. We have to do this explicitly because * writing to a dataset doesn't necessarily change the object header. */ if(H5O_touch(&(dataset->oloc), FALSE, dxpl_id) < 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to update modification time") #endif /* OLD_WAY */ done: /* Shut down the I/O op information */ if(io_op_init && io_info.layout_ops.io_term && (*io_info.layout_ops.io_term)(&fm) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTCLOSEOBJ, FAIL, "unable to shut down I/O op info") #ifdef H5_HAVE_PARALLEL /* Shut down io_info struct */ if(io_info_init && H5D__ioinfo_term(&io_info) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTCLOSEOBJ, FAIL, "can't shut down io_info") #endif /*H5_HAVE_PARALLEL*/ /* Shut down datatype info for operation */ if(type_info_init && H5D__typeinfo_term(&type_info) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTCLOSEOBJ, FAIL, "unable to shut down type info") /* discard projected mem space if it was created */ if(NULL != projected_mem_space) if(H5S_close(projected_mem_space) < 0) HDONE_ERROR(H5E_DATASET, H5E_CANTCLOSEOBJ, FAIL, "unable to shut down projected memory dataspace") FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__write() */ /*------------------------------------------------------------------------- * Function: H5D__ioinfo_init * * Purpose: Routine for determining correct I/O operations for * each I/O action. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Thursday, September 30, 2004 * *------------------------------------------------------------------------- */ static herr_t H5D__ioinfo_init(H5D_t *dset, #ifndef H5_HAVE_PARALLEL const #endif /* H5_HAVE_PARALLEL */ H5D_dxpl_cache_t *dxpl_cache, hid_t dxpl_id, const H5D_type_info_t *type_info, H5D_storage_t *store, H5D_io_info_t *io_info) { FUNC_ENTER_STATIC_NOERR /* check args */ HDassert(dset); HDassert(dset->oloc.file); HDassert(type_info); HDassert(type_info->tpath); HDassert(io_info); /* Set up "normal" I/O fields */ io_info->dset = dset; io_info->dxpl_cache = dxpl_cache; io_info->dxpl_id = dxpl_id; io_info->store = store; /* Set I/O operations to initial values */ io_info->layout_ops = *dset->shared->layout.ops; /* Set the "high-level" I/O operations for the dataset */ io_info->io_ops.multi_read = dset->shared->layout.ops->ser_read; io_info->io_ops.multi_write = dset->shared->layout.ops->ser_write; /* Set the I/O operations for reading/writing single blocks on disk */ if(type_info->is_xform_noop && type_info->is_conv_noop) { /* * If there is no data transform or type conversion then read directly into * the application's buffer. This saves at least one mem-to-mem copy. */ io_info->io_ops.single_read = H5D__select_read; io_info->io_ops.single_write = H5D__select_write; } /* end if */ else { /* * This is the general case (type conversion, usually). */ io_info->io_ops.single_read = H5D__scatgath_read; io_info->io_ops.single_write = H5D__scatgath_write; } /* end else */ #ifdef H5_HAVE_PARALLEL /* Determine if the file was opened with an MPI VFD */ io_info->using_mpi_vfd = IS_H5FD_MPI(dset->oloc.file); #endif /* H5_HAVE_PARALLEL */ FUNC_LEAVE_NOAPI(SUCCEED) } /* end H5D__ioinfo_init() */ /*------------------------------------------------------------------------- * Function: H5D__typeinfo_init * * Purpose: Routine for determining correct datatype information for * each I/O action. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Tuesday, March 4, 2008 * *------------------------------------------------------------------------- */ static herr_t H5D__typeinfo_init(const H5D_t *dset, const H5D_dxpl_cache_t *dxpl_cache, hid_t dxpl_id, hid_t mem_type_id, hbool_t do_write, H5D_type_info_t *type_info) { const H5T_t *src_type; /* Source datatype */ const H5T_t *dst_type; /* Destination datatype */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_STATIC /* check args */ HDassert(type_info); HDassert(dset); /* Initialize type info safely */ HDmemset(type_info, 0, sizeof(*type_info)); /* Get the memory & dataset datatypes */ if(NULL == (type_info->mem_type = (const H5T_t *)H5I_object_verify(mem_type_id, H5I_DATATYPE))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a datatype") type_info->dset_type = dset->shared->type; if(do_write) { src_type = type_info->mem_type; dst_type = dset->shared->type; type_info->src_type_id = mem_type_id; type_info->dst_type_id = dset->shared->type_id; } /* end if */ else { src_type = dset->shared->type; dst_type = type_info->mem_type; type_info->src_type_id = dset->shared->type_id; type_info->dst_type_id = mem_type_id; } /* end else */ /* * Locate the type conversion function and data space conversion * functions, and set up the element numbering information. If a data * type conversion is necessary then register datatype atoms. Data type * conversion is necessary if the user has set the `need_bkg' to a high * enough value in xfer_parms since turning off datatype conversion also * turns off background preservation. */ if(NULL == (type_info->tpath = H5T_path_find(src_type, dst_type, NULL, NULL, dxpl_id, FALSE))) HGOTO_ERROR(H5E_DATASET, H5E_UNSUPPORTED, FAIL, "unable to convert between src and dest datatype") /* Precompute some useful information */ type_info->src_type_size = H5T_get_size(src_type); type_info->dst_type_size = H5T_get_size(dst_type); type_info->max_type_size = MAX(type_info->src_type_size, type_info->dst_type_size); type_info->is_conv_noop = H5T_path_noop(type_info->tpath); type_info->is_xform_noop = H5Z_xform_noop(dxpl_cache->data_xform_prop); if(type_info->is_xform_noop && type_info->is_conv_noop) { type_info->cmpd_subset = NULL; type_info->need_bkg = H5T_BKG_NO; } /* end if */ else { size_t target_size; /* Desired buffer size */ /* Check if the datatypes are compound subsets of one another */ type_info->cmpd_subset = H5T_path_compound_subset(type_info->tpath); /* Check if we need a background buffer */ if(do_write && H5T_detect_class(dset->shared->type, H5T_VLEN, FALSE)) type_info->need_bkg = H5T_BKG_YES; else { H5T_bkg_t path_bkg; /* Type conversion's background info */ if((path_bkg = H5T_path_bkg(type_info->tpath))) { /* Retrieve the bkgr buffer property */ type_info->need_bkg = dxpl_cache->bkgr_buf_type; type_info->need_bkg = MAX(path_bkg, type_info->need_bkg); } /* end if */ else type_info->need_bkg = H5T_BKG_NO; /*never needed even if app says yes*/ } /* end else */ /* Set up datatype conversion/background buffers */ /* Get buffer size from DXPL */ target_size = dxpl_cache->max_temp_buf; /* If the buffer is too small to hold even one element, try to make it bigger */ if(target_size < type_info->max_type_size) { hbool_t default_buffer_info; /* Whether the buffer information are the defaults */ /* Detect if we have all default settings for buffers */ default_buffer_info = (hbool_t)((H5D_TEMP_BUF_SIZE == dxpl_cache->max_temp_buf) && (NULL == dxpl_cache->tconv_buf) && (NULL == dxpl_cache->bkgr_buf)); /* Check if we are using the default buffer info */ if(default_buffer_info) /* OK to get bigger for library default settings */ target_size = type_info->max_type_size; else /* Don't get bigger than the application has requested */ HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "temporary buffer max size is too small") } /* end if */ /* Compute the number of elements that will fit into buffer */ type_info->request_nelmts = target_size / type_info->max_type_size; /* Sanity check elements in temporary buffer */ if(type_info->request_nelmts == 0) HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "temporary buffer max size is too small") /* * Get a temporary buffer for type conversion unless the app has already * supplied one through the xfer properties. Instead of allocating a * buffer which is the exact size, we allocate the target size. The * malloc() is usually less resource-intensive if we allocate/free the * same size over and over. */ if(NULL == (type_info->tconv_buf = (uint8_t *)dxpl_cache->tconv_buf)) { /* Allocate temporary buffer */ if(NULL == (type_info->tconv_buf = H5FL_BLK_MALLOC(type_conv, target_size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for type conversion") type_info->tconv_buf_allocated = TRUE; } /* end if */ if(type_info->need_bkg && NULL == (type_info->bkg_buf = (uint8_t *)dxpl_cache->bkgr_buf)) { size_t bkg_size; /* Desired background buffer size */ /* Compute the background buffer size */ /* (don't try to use buffers smaller than the default size) */ bkg_size = type_info->request_nelmts * type_info->dst_type_size; if(bkg_size < dxpl_cache->max_temp_buf) bkg_size = dxpl_cache->max_temp_buf; /* Allocate background buffer */ /* (Need calloc()-like call since memory needs to be initialized) */ if(NULL == (type_info->bkg_buf = H5FL_BLK_CALLOC(type_conv, bkg_size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for background conversion") type_info->bkg_buf_allocated = TRUE; } /* end if */ } /* end else */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__typeinfo_init() */ #ifdef H5_HAVE_PARALLEL /*------------------------------------------------------------------------- * Function: H5D__ioinfo_adjust * * Purpose: Adjust operation's I/O info for any parallel I/O * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Thursday, March 27, 2008 * *------------------------------------------------------------------------- */ static herr_t H5D__ioinfo_adjust(H5D_io_info_t *io_info, const H5D_t *dset, hid_t dxpl_id, const H5S_t *file_space, const H5S_t *mem_space, const H5D_type_info_t *type_info, const H5D_chunk_map_t *fm) { H5P_genplist_t *dx_plist; /* Data transer property list */ H5D_mpio_actual_chunk_opt_mode_t actual_chunk_opt_mode; /* performed chunk optimization */ H5D_mpio_actual_io_mode_t actual_io_mode; /* performed io mode */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_STATIC /* check args */ HDassert(dset); HDassert(dset->oloc.file); HDassert(mem_space); HDassert(file_space); HDassert(type_info); HDassert(type_info->tpath); HDassert(io_info); /* Get the dataset transfer property list */ if(NULL == (dx_plist = (H5P_genplist_t *)H5I_object(dxpl_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a dataset transfer property list") /* Reset the actual io mode properties to the default values in case * the dxpl was previously used in a collective I/O operation. */ actual_chunk_opt_mode = H5D_MPIO_NO_CHUNK_OPTIMIZATION; actual_io_mode = H5D_MPIO_NO_COLLECTIVE; if(H5P_set(dx_plist, H5D_MPIO_ACTUAL_CHUNK_OPT_MODE_NAME, &actual_chunk_opt_mode) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "couldn't set actual chunk opt mode property") if(H5P_set(dx_plist, H5D_MPIO_ACTUAL_IO_MODE_NAME, &actual_io_mode) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "couldn't set actual io mode property") /* Make any parallel I/O adjustments */ if(io_info->using_mpi_vfd) { htri_t opt; /* Flag whether a selection is optimizable */ /* Record the original state of parallel I/O transfer options */ io_info->orig.xfer_mode = io_info->dxpl_cache->xfer_mode; io_info->orig.coll_opt_mode = io_info->dxpl_cache->coll_opt_mode; io_info->orig.io_ops.single_read = io_info->io_ops.single_read; io_info->orig.io_ops.single_write = io_info->io_ops.single_write; /* Get MPI communicator */ if(MPI_COMM_NULL == (io_info->comm = H5F_mpi_get_comm(dset->oloc.file))) HGOTO_ERROR(H5E_DATASPACE, H5E_CANTGET, FAIL, "can't retrieve MPI communicator") /* Check if we can set direct MPI-IO read/write functions */ if((opt = H5D__mpio_opt_possible(io_info, file_space, mem_space, type_info, fm, dx_plist)) < 0) HGOTO_ERROR(H5E_DATASPACE, H5E_BADRANGE, FAIL, "invalid check for direct IO dataspace ") /* Check if we can use the optimized parallel I/O routines */ if(opt == TRUE) { /* Override the I/O op pointers to the MPI-specific routines */ io_info->io_ops.multi_read = dset->shared->layout.ops->par_read; io_info->io_ops.multi_write = dset->shared->layout.ops->par_write; io_info->io_ops.single_read = H5D__mpio_select_read; io_info->io_ops.single_write = H5D__mpio_select_write; } /* end if */ else { /* If we won't be doing collective I/O, but the user asked for * collective I/O, change the request to use independent I/O, but * mark it so that we remember to revert the change. */ if(io_info->dxpl_cache->xfer_mode == H5FD_MPIO_COLLECTIVE) { /* Change the xfer_mode to independent for handling the I/O */ io_info->dxpl_cache->xfer_mode = H5FD_MPIO_INDEPENDENT; if(H5P_set(dx_plist, H5D_XFER_IO_XFER_MODE_NAME, &io_info->dxpl_cache->xfer_mode) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set transfer mode") } /* end if */ } /* end else */ } /* end if */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__ioinfo_adjust() */ /*------------------------------------------------------------------------- * Function: H5D__ioinfo_term * * Purpose: Common logic for terminating an I/O info object * (Only used for restoring MPI transfer mode currently) * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Friday, February 6, 2004 * *------------------------------------------------------------------------- */ static herr_t H5D__ioinfo_term(H5D_io_info_t *io_info) { herr_t ret_value = SUCCEED; /*return value */ FUNC_ENTER_STATIC /* Check if we used the MPI VFD for the I/O */ if(io_info->using_mpi_vfd) { /* Check if we need to revert the change to the xfer mode */ if(io_info->orig.xfer_mode != io_info->dxpl_cache->xfer_mode) { H5P_genplist_t *dx_plist; /* Data transer property list */ /* Get the dataset transfer property list */ if(NULL == (dx_plist = (H5P_genplist_t *)H5I_object(io_info->dxpl_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a dataset transfer property list") /* Restore the original parallel I/O mode */ if(H5P_set(dx_plist, H5D_XFER_IO_XFER_MODE_NAME, &io_info->orig.xfer_mode) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set transfer mode") } /* end if */ /* Check if we need to revert the change to the collective opt mode */ if(io_info->orig.coll_opt_mode != io_info->dxpl_cache->coll_opt_mode) { H5P_genplist_t *dx_plist; /* Data transer property list */ /* Get the dataset transfer property list */ if(NULL == (dx_plist = (H5P_genplist_t *)H5I_object(io_info->dxpl_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a dataset transfer property list") /* Restore the original parallel I/O mode */ if(H5P_set(dx_plist, H5D_XFER_MPIO_COLLECTIVE_OPT_NAME, &io_info->orig.coll_opt_mode) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set collective option mode") } /* end if */ } /* end if */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5D__ioinfo_term() */ #endif /* H5_HAVE_PARALLEL */ /*------------------------------------------------------------------------- * Function: H5D__typeinfo_term * * Purpose: Common logic for terminating a type info object * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Thursday, March 6, 2008 * *------------------------------------------------------------------------- */ static herr_t H5D__typeinfo_term(const H5D_type_info_t *type_info) { FUNC_ENTER_STATIC_NOERR /* Check for releasing datatype conversion & background buffers */ if(type_info->tconv_buf_allocated) { HDassert(type_info->tconv_buf); (void)H5FL_BLK_FREE(type_conv, type_info->tconv_buf); } /* end if */ if(type_info->bkg_buf_allocated) { HDassert(type_info->bkg_buf); (void)H5FL_BLK_FREE(type_conv, type_info->bkg_buf); } /* end if */ FUNC_LEAVE_NOAPI(SUCCEED) } /* end H5D__typeinfo_term() */