/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Programmer: Robb Matzke * Monday, July 26, 1999 * * Purpose: The Virtual File Layer as described in documentation. * This is the greatest common denominator for all types of * storage access whether a file, memory, network, etc. This * layer usually just dispatches the request to an actual * file driver layer. */ #define H5F_PACKAGE /*suppress error about including H5Fpkg */ /* Packages needed by this file */ #include "H5private.h" /*library functions */ #include "H5Dprivate.h" /*datasets */ #include "H5Eprivate.h" /*error handling */ #include "H5Fpkg.h" /*files */ #include "H5FDprivate.h" /*virtual file driver */ #include "H5FLprivate.h" /*Free Lists */ #include "H5Iprivate.h" /*interface abstraction layer */ #include "H5MMprivate.h" /*memory management */ #include "H5Pprivate.h" /*property lists */ #ifdef H5_HAVE_FPHDF5 #include "H5FDfphdf5.h" /*Flexible Parallel HDF5 driver */ #include "H5FPprivate.h" /*Flexible Parallel HDF5 */ #endif /* H5_HAVE_FPHDF5 */ /* Interface initialization */ #define PABLO_MASK H5FD_mask #define INTERFACE_INIT H5FD_init_interface static int interface_initialize_g = 0; /* static prototypes */ static herr_t H5FD_init_interface(void); static herr_t H5FD_free_cls(H5FD_class_t *cls); static haddr_t H5FD_alloc_from_free_list(H5FD_t *file, H5FD_mem_t type, H5FD_mem_t mapped_type, hsize_t size); static haddr_t H5FD_alloc_metadata(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, hsize_t size); static haddr_t H5FD_alloc_raw(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, hsize_t size); static haddr_t H5FD_real_alloc(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, hsize_t size); static haddr_t H5FD_update_eoa(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, hsize_t size); /* Declare a free list to manage the H5FD_free_t struct */ H5FL_DEFINE(H5FD_free_t); /* Declare a PQ free list to manage the metadata accumulator buffer */ H5FL_BLK_DEFINE_STATIC(meta_accum); /* Local macro definitions */ #define H5FD_ACCUM_THROTTLE 8 #define H5FD_ACCUM_THRESHOLD 2048 /* Static local variables */ /* * Global count of the number of H5FD_t's handed out. This is used as a * "serial number" for files that are currently open and is used for the * 'fileno' field in H5G_stat_t. However, if a VFL driver is not able * to detect whether two files are the same, a file that has been opened * by H5Fopen more than once with that VFL driver will have two different * serial numbers. :-/ * * Also, if a file is opened, the 'fileno' field is retrieved for an * object and the file is closed and re-opened, the 'fileno' value will * be different. */ static unsigned long file_serial_no; /*------------------------------------------------------------------------- * Function: H5FD_init_interface * * Purpose: Initialize the virtual file layer. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Monday, July 26, 1999 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t H5FD_init_interface(void) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOINIT(H5FD_init_interface); if (H5I_init_group(H5I_VFL, H5I_VFL_HASHSIZE, 0, (H5I_free_t)H5FD_free_cls)<0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "unable to initialize interface"); /* Reset the file serial numbers */ file_serial_no=0; done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_term_interface * * Purpose: Terminate this interface: free all memory and reset global * variables to their initial values. Release all ID groups * associated with this interface. * * Return: Success: Positive if anything was done that might * have affected other interfaces; zero * otherwise. * * Failure: Never fails. * * Programmer: Robb Matzke * Friday, February 19, 1999 * * Modifications: * *------------------------------------------------------------------------- */ int H5FD_term_interface(void) { int n = 0; FUNC_ENTER_NOINIT(H5FD_term_interface); if (interface_initialize_g) { if ((n=H5I_nmembers(H5I_VFL))) { H5I_clear_group(H5I_VFL, FALSE); } else { H5I_destroy_group(H5I_VFL); interface_initialize_g = 0; n = 1; /*H5I*/ } } FUNC_LEAVE_NOAPI(n); } /*------------------------------------------------------------------------- * Function: H5FD_free_cls * * Purpose: Frees a file driver class struct and returns an indication of * success. This function is used as the free callback for the * virtual file layer object identifiers (cf H5FD_init_interface). * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Monday, July 26, 1999 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t H5FD_free_cls(H5FD_class_t *cls) { FUNC_ENTER_NOINIT(H5FD_free_cls); H5MM_xfree(cls); FUNC_LEAVE_NOAPI(SUCCEED); } /*------------------------------------------------------------------------- * Function: H5FDregister * * Purpose: Registers a new file driver as a member of the virtual file * driver class. Certain fields of the class struct are * required and that is checked here so it doesn't have to be * checked every time the field is accessed. * * Return: Success: A file driver ID which is good until the * library is closed or the driver is * unregistered. * * Failure: A negative value. * * Programmer: Robb Matzke * Monday, July 26, 1999 * * Modifications: * *------------------------------------------------------------------------- */ hid_t H5FDregister(const H5FD_class_t *cls) { hid_t ret_value; H5FD_class_t *saved=NULL; H5FD_mem_t type; FUNC_ENTER_API(H5FDregister, FAIL); H5TRACE1("i","x",cls); /* Check arguments */ if (!cls) HGOTO_ERROR(H5E_ARGS, H5E_UNINITIALIZED, FAIL, "null class pointer is disallowed"); if (!cls->open || !cls->close) HGOTO_ERROR(H5E_ARGS, H5E_UNINITIALIZED, FAIL, "`open' and/or `close' methods are not defined"); if (!cls->get_eoa || !cls->set_eoa) HGOTO_ERROR(H5E_ARGS, H5E_UNINITIALIZED, FAIL, "`get_eoa' and/or `set_eoa' methods are not defined"); if (!cls->get_eof) HGOTO_ERROR(H5E_ARGS, H5E_UNINITIALIZED, FAIL, "`get_eof' method is not defined"); if (!cls->read || !cls->write) HGOTO_ERROR(H5E_ARGS, H5E_UNINITIALIZED, FAIL, "`read' and/or `write' method is not defined"); for (type=H5FD_MEM_DEFAULT; typefl_map[type]fl_map[type]>=H5FD_MEM_NTYPES) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid free-list mapping"); } /* Copy the class structure so the caller can reuse or free it */ if (NULL==(saved=H5MM_malloc(sizeof(H5FD_class_t)))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for file driver class struct"); *saved = *cls; /* Create the new class ID */ if ((ret_value=H5I_register(H5I_VFL, saved))<0) HGOTO_ERROR(H5E_ATOM, H5E_CANTREGISTER, FAIL, "unable to register file driver ID"); done: if(ret_value<0) if(saved) H5MM_xfree(saved); FUNC_LEAVE_API(ret_value); } /*------------------------------------------------------------------------- * Function: H5FDunregister * * Purpose: Removes a driver ID from the library. This in no way affects * file access property lists which have been defined to use * this driver or files which are already opened under this * driver. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Monday, July 26, 1999 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5FDunregister(hid_t driver_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_API(H5FDunregister, FAIL); H5TRACE1("e","i",driver_id); /* Check arguments */ if (NULL==H5I_object_verify(driver_id,H5I_VFL)) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file driver"); /* The H5FD_class_t struct will be freed by this function */ if (H5I_dec_ref(driver_id)<0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "unable to unregister file driver"); done: FUNC_LEAVE_API(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_get_class * * Purpose: Optains a pointer to the driver struct containing all the * callback pointers, etc. The PLIST_ID argument can be a file * access property list, a data transfer property list, or a * file driver identifier. * * Return: Success: Ptr to the driver information. The pointer is * only valid as long as the driver remains * registered or some file or property list * exists which references the driver. * * Failure: NULL * * Programmer: Robb Matzke * Friday, August 20, 1999 * * Modifications: * * Raymond Lu * Tuesday, Oct 23, 2001 * Changed the file access list to the new generic property * list. * *------------------------------------------------------------------------- */ H5FD_class_t * H5FD_get_class(hid_t id) { H5P_genplist_t *plist; /* Property list pointer */ H5FD_class_t *ret_value=NULL; hid_t driver_id = -1; FUNC_ENTER_NOAPI(H5FD_get_class, NULL); if (H5I_VFL==H5I_get_type(id)) { ret_value = H5I_object(id); } else { /* Get the plist structure */ if(NULL == (plist = H5I_object(id))) HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, NULL, "can't find object for ID"); if (TRUE==H5P_isa_class(id,H5P_FILE_ACCESS)) { if(H5P_get(plist, H5F_ACS_FILE_DRV_ID_NAME, &driver_id) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get driver ID"); ret_value = H5FD_get_class(driver_id); } else if (TRUE==H5P_isa_class(id,H5P_DATASET_XFER)) { if(H5P_get(plist, H5D_XFER_VFL_ID_NAME, &driver_id) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get driver ID"); ret_value = H5FD_get_class(driver_id); } else { HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a driver id, file access property list or data transfer property list"); } } /* end if */ done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_sb_size * * Purpose: Obtains the number of bytes required to store the driver file * access data in the HDF5 superblock. * * Return: Success: Number of bytes required. * * Failure: 0 if an error occurs or if the driver has no * data to store in the superblock. * * Programmer: Robb Matzke * Monday, August 16, 1999 * * Modifications: * *------------------------------------------------------------------------- */ hsize_t H5FD_sb_size(H5FD_t *file) { hsize_t ret_value=0; FUNC_ENTER_NOAPI(H5FD_sb_size, 0); assert(file && file->cls); if (file->cls->sb_size) ret_value = (file->cls->sb_size)(file); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_sb_encode * * Purpose: Encode driver-specific data into the output arguments. The * NAME is a nine-byte buffer which should get an * eight-character driver name and/or version followed by a null * terminator. The BUF argument is a buffer to receive the * encoded driver-specific data. The size of the BUF array is * the size returned by the H5FD_sb_size() call. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Monday, August 16, 1999 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5FD_sb_encode(H5FD_t *file, char *name/*out*/, uint8_t *buf) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_sb_encode, FAIL); assert(file && file->cls); if (file->cls->sb_encode && (file->cls->sb_encode)(file, name/*out*/, buf/*out*/)<0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "driver sb_encode request failed"); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_sb_decode * * Purpose: Decodes the driver information block. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Monday, August 16, 1999 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5FD_sb_decode(H5FD_t *file, const char *name, const uint8_t *buf) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_sb_decode, FAIL); assert(file && file->cls); if (file->cls->sb_decode && (file->cls->sb_decode)(file, name, buf)<0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "driver sb_decode request failed"); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_fapl_get * * Purpose: Gets the file access property list associated with a file. * Usually the file will copy what it needs from the original * file access property list when the file is created. The * purpose of this function is to create a new file access * property list based on the settings in the file, which may * have been modified from the original file access property * list. * * Return: Success: Pointer to a new file access property list * with all members copied. If the file is * closed then this property list lives on, and * vice versa. * * Failure: NULL, including when the file has no * properties. * * Programmer: Robb Matzke * Friday, August 13, 1999 * * Modifications: * *------------------------------------------------------------------------- */ void * H5FD_fapl_get(H5FD_t *file) { void *ret_value=NULL; FUNC_ENTER_NOAPI(H5FD_fapl_get, NULL); assert(file); if (file->cls->fapl_get) ret_value = (file->cls->fapl_get)(file); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_fapl_copy * * Purpose: Copies the driver-specific part of the file access property * list. * * Return: Success: Pointer to new driver-specific file access * properties. * * Failure: NULL, but also returns null with no error * pushed onto the error stack if the OLD_FAPL * is null. * * Programmer: Robb Matzke * Tuesday, August 3, 1999 * * Modifications: * *------------------------------------------------------------------------- */ void * H5FD_fapl_copy(hid_t driver_id, const void *old_fapl) { void *new_fapl = NULL; H5FD_class_t *driver=NULL; void *ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5FD_fapl_copy, NULL); /* Check args */ if (NULL==(driver=H5I_object(driver_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a driver ID"); if (!old_fapl) HGOTO_DONE(NULL); /*but no error*/ /* Allow the driver to copy or do it ourselves */ if (driver->fapl_copy) { new_fapl = (driver->fapl_copy)(old_fapl); } else if (driver->fapl_size>0) { new_fapl = H5MM_malloc(driver->fapl_size); HDmemcpy(new_fapl, old_fapl, driver->fapl_size); } else HGOTO_ERROR(H5E_VFL, H5E_UNSUPPORTED, NULL, "no way to copy driver file access property list"); /* Set return value */ ret_value=new_fapl; done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_fapl_free * * Purpose: Frees the driver-specific file access property list. * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Tuesday, August 3, 1999 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5FD_fapl_free(hid_t driver_id, void *fapl) { H5FD_class_t *driver=NULL; herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_fapl_free, FAIL); /* Check args */ if (NULL==(driver=H5I_object(driver_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a driver ID"); /* Allow driver to free or do it ourselves */ if (fapl && driver->fapl_free) { if ((driver->fapl_free)(fapl)<0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "driver fapl_free request failed"); } else { H5MM_xfree(fapl); } done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_dxpl_copy * * Purpose: Copies the driver-specific part of the data transfer property * list. * * Return: Success: Pointer to new driver-specific data transfer * properties. * * Failure: NULL, but also returns null with no error * pushed onto the error stack if the OLD_DXPL * is null. * * Programmer: Robb Matzke * Tuesday, August 3, 1999 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5FD_dxpl_copy(hid_t driver_id, const void *old_dxpl, void **copied_dxpl) { void *new_dxpl = NULL; H5FD_class_t *driver=NULL; herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_dxpl_copy, FAIL); /* Check args */ if (NULL==(driver=H5I_object(driver_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a driver ID"); /* Copy old dxpl, if one exists */ if (old_dxpl) { /* Allow the driver to copy or do it ourselves */ if (driver->dxpl_copy) { new_dxpl = (driver->dxpl_copy)(old_dxpl); } else if (driver->dxpl_size>0) { new_dxpl = H5MM_malloc(driver->dxpl_size); assert(new_dxpl); HDmemcpy(new_dxpl, old_dxpl, driver->dxpl_size); } else HGOTO_ERROR(H5E_VFL, H5E_UNSUPPORTED, FAIL, "no way to copy driver file access property list"); } /* end if */ /* Set copied value */ *copied_dxpl=new_dxpl; done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_dxpl_free * * Purpose: Frees the driver-specific data transfer property list. * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Tuesday, August 3, 1999 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5FD_dxpl_free(hid_t driver_id, void *dxpl) { H5FD_class_t *driver=NULL; herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_dxpl_free, FAIL); /* Check args */ if (NULL==(driver=H5I_object(driver_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a driver ID"); /* Allow driver to free or do it ourselves */ if (dxpl && driver->dxpl_free) { if ((driver->dxpl_free)(dxpl)<0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "driver dxpl_free request failed"); } else { H5MM_xfree(dxpl); } done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FDopen * * Purpose: Opens a file named NAME for the type(s) of access described * by the bit vector FLAGS according to a file access property * list FAPL_ID (which may be the constant H5P_DEFAULT). The * file should expect to handle format addresses in the range [0, * MAXADDR] (if MAXADDR is the undefined address then the caller * doesn't care about the address range). * * Possible values for the FLAGS bits are: * * H5F_ACC_RDWR: Open the file for read and write access. If * this bit is not set then open the file for * read only access. It is permissible to open a * file for read and write access when only read * access is requested by the library (the * library will never attempt to write to a file * which it opened with only read access). * * H5F_ACC_CREATE: Create the file if it doesn't already exist. * However, see H5F_ACC_EXCL below. * * H5F_ACC_TRUNC: Truncate the file if it already exists. This * is equivalent to deleting the file and then * creating a new empty file. * * H5F_ACC_EXCL: When used with H5F_ACC_CREATE, if the file * already exists then the open should fail. * Note that this is unsupported/broken with * some file drivers (e.g., sec2 across nfs) and * will contain a race condition when used to * perform file locking. * * The MAXADDR is the maximum address which will be requested by * the library during an allocation operation. Usually this is * the same value as the MAXADDR field of the class structure, * but it can be smaller if the driver is being used under some * other driver. * * Note that when the driver `open' callback gets control that * the public part of the file struct (the H5FD_t part) will be * incomplete and will be filled in after that callback returns. * * Return: Success: Pointer to a new file driver struct. * * Failure: NULL * * Programmer: Robb Matzke * Tuesday, July 27, 1999 * * Modifications: * *------------------------------------------------------------------------- */ H5FD_t * H5FDopen(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr) { H5FD_t *ret_value=NULL; FUNC_ENTER_API(H5FDopen, NULL); /* Check arguments */ if(H5P_DEFAULT == fapl_id) fapl_id = H5P_FILE_ACCESS_DEFAULT; else if (TRUE!=H5P_isa_class(fapl_id,H5P_FILE_ACCESS)) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a file access property list"); if (NULL==(ret_value=H5FD_open(name, flags, fapl_id, maxaddr))) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, NULL, "unable to open file"); done: FUNC_LEAVE_API(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_open * * Purpose: Private version of H5FDopen() * * Return: Success: Pointer to a new file driver struct * * Failure: NULL * * Programmer: Robb Matzke * Wednesday, August 4, 1999 * * Modifications: * * Raymond Lu * Tuesday, Oct 23, 2001 * Changed the file access list to the new generic property * list. * *------------------------------------------------------------------------- */ H5FD_t * H5FD_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr) { H5FD_class_t *driver; H5FD_t *file=NULL; hid_t driver_id = -1; hsize_t meta_block_size=0; hsize_t sdata_block_size=0; H5P_genplist_t *plist; /* Property list pointer */ H5FD_t *ret_value; FUNC_ENTER_NOAPI(H5FD_open, NULL); /* Get file access property list */ if(NULL == (plist = H5I_object(fapl_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a file access property list"); if (0==maxaddr) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL, "zero format address range"); if(H5P_get(plist, H5F_ACS_FILE_DRV_ID_NAME, &driver_id) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get driver ID"); /* Get driver info */ if (NULL==(driver=H5I_object(driver_id))) HGOTO_ERROR(H5E_VFL, H5E_BADVALUE, NULL, "invalid driver ID in file access property list"); if (NULL==driver->open) HGOTO_ERROR(H5E_VFL, H5E_UNSUPPORTED, NULL, "file driver has no `open' method"); /* Dispatch to file driver */ if (HADDR_UNDEF==maxaddr) maxaddr = driver->maxaddr; if (NULL==(file=(driver->open)(name, flags, fapl_id, maxaddr))) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, NULL, "open failed"); /* * Fill in public fields. We must increment the reference count on the * driver ID to prevent it from being freed while this file is open. */ file->driver_id = driver_id; H5I_inc_ref(file->driver_id); file->cls = driver; file->maxaddr = maxaddr; HDmemset(file->fl, 0, sizeof(file->fl)); if(H5P_get(plist, H5F_ACS_META_BLOCK_SIZE_NAME, &(meta_block_size)) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get meta data block size"); file->def_meta_block_size = meta_block_size; if(H5P_get(plist, H5F_ACS_SDATA_BLOCK_SIZE_NAME, &(sdata_block_size)) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get 'small data' block size"); file->def_sdata_block_size = sdata_block_size; file->accum_loc = HADDR_UNDEF; if(H5P_get(plist, H5F_ACS_ALIGN_THRHD_NAME, &(file->threshold)) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get alignment threshold"); if(H5P_get(plist, H5F_ACS_ALIGN_NAME, &(file->alignment)) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get alignment"); /* Retrieve the VFL driver feature flags */ if (H5FD_query(file, &(file->feature_flags))<0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, NULL, "unable to query file driver"); /* Increment the global serial number & assign it to this H5FD_t object */ if(++file_serial_no==0) { /* (Just error out if we wrap around for now...) */ HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, NULL, "unable to get file serial number"); } /* end if */ file->fileno=file_serial_no; /* Set return value */ ret_value=file; done: /* Can't cleanup 'file' information, since we don't know what type it is */ FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FDclose * * Purpose: Closes the file by calling the driver `close' callback, which * should free all driver-private data and free the file struct. * Note that the public part of the file struct (the H5FD_t part) * will be all zero during the driver close callback like during * the `open' callback. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Tuesday, July 27, 1999 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5FDclose(H5FD_t *file) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_API(H5FDclose, FAIL); H5TRACE1("e","x",file); if (!file || !file->cls) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid file pointer"); if (H5FD_close(file)<0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "unable to close file"); done: FUNC_LEAVE_API(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_close * * Purpose: Private version of H5FDclose() * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Wednesday, August 4, 1999 * * Modifications: * Robb Matzke, 2000-11-10 * Removed a call to set *file to all zero because the struct * has already been freed by the close method. This fixes a write * to freed memory. * * Bill Wendling, 2003-02-17 * Split out the freeing of the freelist from this function * so that the Flexible PHDF5 stuff can call it without * having to call H5FD_close(). *------------------------------------------------------------------------- */ herr_t H5FD_close(H5FD_t *file) { const H5FD_class_t *driver; herr_t ret_value = SUCCEED; FUNC_ENTER_NOAPI(H5FD_close, FAIL); /* check args */ assert(file && file->cls); /* Free the freelist (this call never fails) */ H5FD_free_freelist(file); /* Prepare to close file by clearing all public fields */ driver = file->cls; H5I_dec_ref(file->driver_id); /* * Dispatch to the driver for actual close. If the driver fails to * close the file then the file will be in an unusable state. */ assert(driver->close); if ((driver->close)(file) < 0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "close failed"); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_free_freelist * Purpose: Split off from H5FD_close(). Free the elements in the * free list for this file driver. * Return: Success: SUCCEED * Failure: Never fails * Programmer: Bill Wendling * 17. February 2003 * Modifications: *------------------------------------------------------------------------- */ herr_t H5FD_free_freelist(H5FD_t *file) { H5FD_mem_t i; #ifdef H5F_DEBUG unsigned nblocks = 0; hsize_t nbytes = 0; #endif /* H5F_DEBUG */ herr_t ret_value = SUCCEED; FUNC_ENTER_NOAPI(H5FD_free_freelist, FAIL); /* check args */ assert(file && file->cls); /* * Free all free-lists, leaking any memory thus described. Also leaks * file space allocated but not used when metadata aggregation is * turned on. */ for (i = H5FD_MEM_DEFAULT; i < H5FD_MEM_NTYPES; H5_INC_ENUM(H5FD_mem_t, i)) { H5FD_free_t *cur, *next; for (cur = file->fl[i]; cur; cur = next) { #ifdef H5F_DEBUG ++nblocks; nbytes += cur->size; #endif /* H5F_DEBUG */ next = cur->next; H5FL_FREE(H5FD_free_t, cur); } file->fl[i] = NULL; } #ifdef H5F_DEBUG if (nblocks && H5DEBUG(F)) HDfprintf(H5DEBUG(F), "H5F: leaked %Hu bytes of file memory in %u blocks\n", nbytes, nblocks); #endif /* H5F_DEBUG */ /* Check if we need to reset the metadata accumulator information */ if (file->feature_flags & H5FD_FEAT_ACCUMULATE_METADATA) { /* Free the buffer */ if (file->meta_accum) file->meta_accum = H5FL_BLK_FREE(meta_accum, file->meta_accum); /* Reset the buffer sizes & location */ file->accum_buf_size = file->accum_size = 0; file->accum_loc = HADDR_UNDEF; file->accum_dirty = 0; } done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FDcmp * * Purpose: Compare the keys of two files using the file driver callback * if the files belong to the same driver, otherwise sort the * files by driver class pointer value. * * Return: Success: A value like strcmp() * * Failure: Must never fail. If both file handles are * invalid then they compare equal. If one file * handle is invalid then it compares less than * the other. If both files belong to the same * driver and the driver doesn't provide a * comparison callback then the file pointers * themselves are compared. * * Programmer: Robb Matzke * Tuesday, July 27, 1999 * * Modifications: * *------------------------------------------------------------------------- */ int H5FDcmp(const H5FD_t *f1, const H5FD_t *f2) { int ret_value; FUNC_ENTER_API(H5FDcmp, -1); /*return value is arbitrary*/ H5TRACE2("Is","xx",f1,f2); ret_value = H5FD_cmp(f1, f2); done: FUNC_LEAVE_API(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_cmp * * Purpose: Private version of H5FDcmp() * * Return: Success: A value like strcmp() * * Failure: Must never fail. * * Programmer: Robb Matzke * Wednesday, August 4, 1999 * * Modifications: * *------------------------------------------------------------------------- */ int H5FD_cmp(const H5FD_t *f1, const H5FD_t *f2) { int ret_value; FUNC_ENTER_NOAPI(H5FD_cmp, -1); /*return value is arbitrary*/ if ((!f1 || !f1->cls) && (!f2 || !f2->cls)) HGOTO_DONE(0); if (!f1 || !f1->cls) HGOTO_DONE(-1); if (!f2 || !f2->cls) HGOTO_DONE(1); if (f1->cls < f2->cls) HGOTO_DONE(-1); if (f1->cls > f2->cls) HGOTO_DONE(1); /* Files are same driver; no cmp callback */ if (!f1->cls->cmp) { if (f1f2) HGOTO_DONE(1); HGOTO_DONE(0); } ret_value = (f1->cls->cmp)(f1, f2); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FDquery * * Purpose: Query a VFL driver for its feature flags. (listed in H5FDpublic.h) * * Return: Success: non-negative * * Failure: negative * * Programmer: Quincey Koziol * Friday, August 25, 2000 * * Modifications: * *------------------------------------------------------------------------- */ int H5FDquery(const H5FD_t *f, unsigned long *flags/*out*/) { int ret_value; FUNC_ENTER_API(H5FDquery, FAIL); H5TRACE2("Is","xx",f,flags); assert(f); assert(flags); ret_value = H5FD_query(f, flags); done: FUNC_LEAVE_API(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_query * * Purpose: Private version of H5FDquery() * * Return: Success: non-negative * * Failure: negative * * Programmer: Quincey Koziol * Friday, August 25, 2000 * * Modifications: * *------------------------------------------------------------------------- */ int H5FD_query(const H5FD_t *f, unsigned long *flags/*out*/) { int ret_value=0; FUNC_ENTER_NOAPI(H5FD_query, FAIL); assert(f); assert(flags); /* Check for query driver and call it */ if (f->cls->query) ret_value = (f->cls->query)(f, flags); else *flags=0; done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FDalloc * * Purpose: Allocates SIZE bytes of memory from the FILE. The memory will * be used according to the allocation class TYPE. First we try * to satisfy the request from one of the free lists, according * to the free list map provided by the driver. The free list * array has one entry for each request type and the value of * that array element can be one of four possibilities: * * It can be the constant H5FD_MEM_DEFAULT (or zero) which * indicates that the identity mapping is used. In other * words, the request type maps to its own free list. * * It can be the request type itself, which has the same * effect as the H5FD_MEM_DEFAULT value above. * * It can be the ID for another request type, which * indicates that the free list for the specified type * should be used instead. * * It can be the constant H5FD_MEM_NOLIST which means that * no free list should be used for this type of request. * * If the request cannot be satisfied from a free list then * either the driver's `alloc' callback is invoked (if one was * supplied) or the end-of-address marker is extended. The * `alloc' callback is always called with the same arguments as * the H5FDalloc(). * * Return: Success: The format address of the new file memory. * * Failure: The undefined address HADDR_UNDEF * * Programmer: Robb Matzke * Tuesday, July 27, 1999 * * Modifications: * *------------------------------------------------------------------------- */ haddr_t H5FDalloc(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, hsize_t size) { haddr_t ret_value = HADDR_UNDEF; FUNC_ENTER_API(H5FDalloc, HADDR_UNDEF); H5TRACE4("a","xMtih",file,type,dxpl_id,size); /* Check args */ if (!file || !file->cls) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, HADDR_UNDEF, "invalid file pointer"); if (type<0 || type>=H5FD_MEM_NTYPES) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, HADDR_UNDEF, "invalid request type"); if (size<=0) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, HADDR_UNDEF, "zero-size request"); if (H5P_DEFAULT == dxpl_id) dxpl_id= H5P_DATASET_XFER_DEFAULT; else if (TRUE!=H5P_isa_class(dxpl_id,H5P_DATASET_XFER)) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, HADDR_UNDEF, "not a data transfer property list"); /* Do the real work */ if (HADDR_UNDEF==(ret_value=H5FD_alloc(file, type, dxpl_id, size))) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, HADDR_UNDEF, "unable to allocate file memory"); done: FUNC_LEAVE_API(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_alloc * Purpose: Private version of H5FDalloc(). * * For FPHDF5, the dxpl_id is meaningless. The only place it * is likely to be used is in the H5FD_free() function where * it can make a call to H5FD_write() (which needs this * property list). FPHDF5 doesn't have metadata accumulation * turned on, so it won't ever call the H5FD_write() * function. * * Return: Success: The format address of the new file memory. * Failure: The undefined address HADDR_UNDEF * Programmer: Robb Matzke * Wednesday, August 4, 1999 * Modifications: * Albert Cheng, 2001/05/01 * Implement the allocation by alignment/threshold. * * Bill Wendling, 2002/12/02 * Split apart into subfunctions for each separate task. * * Bill Wendling, 2003/02/19 * Added support for FPHDF5. * *------------------------------------------------------------------------- */ haddr_t H5FD_alloc(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, hsize_t size) { H5FD_mem_t mapped_type; haddr_t ret_value = HADDR_UNDEF; FUNC_ENTER_NOAPI(H5FD_alloc, HADDR_UNDEF); /* check args */ assert(file); assert(file->cls); assert(type >= 0 && type < H5FD_MEM_NTYPES); assert(size > 0); #ifdef H5_HAVE_FPHDF5 /* * When we're using the FPHDF5 driver, allocate from the SAP. If this * is the SAP executing this code, then skip the send to the SAP and * try to do the actual allocations. */ if (H5FD_is_fphdf5_driver(file) && !H5FD_fphdf5_is_sap(file)) { unsigned req_id = 0; unsigned capt_only = 0; H5FP_status_t status = H5FP_STATUS_OK; H5P_genplist_t *plist; H5FP_alloc_t fp_alloc; /* Get the data xfer property list */ if ((plist = H5I_object(dxpl_id)) == NULL) HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, HADDR_UNDEF, "not a dataset transfer list"); if (H5P_exist_plist(plist, H5FD_FPHDF5_CAPTN_ALLOC_ONLY) > 0) if (H5P_get(plist, H5FD_FPHDF5_CAPTN_ALLOC_ONLY, &capt_only) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTDELETE, HADDR_UNDEF, "can't retrieve FPHDF5 property"); HDmemset(&fp_alloc, 0, sizeof(fp_alloc)); /* * If the captain is the only one who should allocate resources, * then do just that... */ if (!capt_only || H5FD_fphdf5_is_captain(file)) { /* Send the request to the SAP */ if (H5FP_request_allocate(file, type, size, &fp_alloc.addr, &fp_alloc.eoa, &req_id, &status) != SUCCEED) /* FIXME: Should we check the "status" variable here? */ HGOTO_ERROR(H5E_FPHDF5, H5E_CANTALLOC, HADDR_UNDEF, "server couldn't allocate from file"); } if (capt_only) { int mrc; if ((mrc = MPI_Bcast(&fp_alloc, 1, H5FP_alloc, (int)H5FP_capt_barrier_rank, H5FP_SAP_BARRIER_COMM)) != MPI_SUCCESS) HMPI_GOTO_ERROR(HADDR_UNDEF, "MPI_Bcast failed", mrc); } /* Set the EOA for all processes. This doesn't fail. */ file->cls->set_eoa(file, fp_alloc.eoa); /* We've succeeded -- return the value */ HGOTO_DONE(fp_alloc.addr); } #endif /* H5_HAVE_FPHDF5 */ #ifdef H5F_DEBUG if (H5DEBUG(F)) HDfprintf(H5DEBUG(F), "%s: alignment=%Hd, threshold=%Hd, size=%Hd\n", FUNC, file->alignment, file->threshold, size); #endif /* H5F_DEBUG */ /* Map the allocation request to a free list */ if (H5FD_MEM_DEFAULT == file->cls->fl_map[type]) mapped_type = type; else mapped_type = file->cls->fl_map[type]; /* Try to allocate from the free list first */ if ((ret_value = H5FD_alloc_from_free_list(file, type, mapped_type, size)) != HADDR_UNDEF) HGOTO_DONE(ret_value); #ifdef H5F_DEBUG if (H5DEBUG(F)) HDfprintf(H5DEBUG(F), "%s: Could not allocate from freelists\n", FUNC); #endif /* H5F_DEBUG */ if (type != H5FD_MEM_DRAW) { /* Handle metadata differently from "raw" data */ if ((ret_value = H5FD_alloc_metadata(file, type, dxpl_id, size)) == HADDR_UNDEF) HGOTO_ERROR(H5E_VFL, H5E_CANTFREE, HADDR_UNDEF, "can't allocate for metadata"); } else { /* Allocate "raw" data */ if ((ret_value = H5FD_alloc_raw(file, type, dxpl_id, size)) == HADDR_UNDEF) HGOTO_ERROR(H5E_VFL, H5E_CANTFREE, HADDR_UNDEF, "can't allocate for raw data"); } done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_alloc_from_free_list * Purpose: Try to allocate SIZE bytes of memory from the free list * if possible. * * This is split from H5FD_alloc(). * Return: Success: The format address of the new file memory. * Failure: The undefined address HADDR_UNDEF * Programmer: Bill Wendling * 02. December, 2002 * Modifications: *------------------------------------------------------------------------- */ static haddr_t H5FD_alloc_from_free_list(H5FD_t *file, H5FD_mem_t type, H5FD_mem_t mapped_type, hsize_t size) { haddr_t ret_value = HADDR_UNDEF; FUNC_ENTER_NOAPI(H5FD_alloc_from_free_list, HADDR_UNDEF); assert(file); assert(type >= 0 && type < H5FD_MEM_NTYPES); assert(size > 0); /* * Try to satisfy the request from the free list. Only perform the * search if the free list has the potential of satisfying the * request. * * Here, aligned requests are requests that are >= threshold and * alignment > 1. * * For non-aligned request, first try to find an exact match, * otherwise use the best match which is the smallest size that meets * the requested size. * * For aligned address request, find a block in the following order * of preferences: * * 1. block address is aligned and exact match in size; * 2. block address is aligned with smallest size > requested size; * 3. block address is not aligned with smallest size >= requested size. */ if (mapped_type >= 0 && (file->maxsize == 0 || size <= file->maxsize)) { H5FD_free_t *prev = NULL, *best = NULL; H5FD_free_t *cur = file->fl[mapped_type]; int found_aligned = 0; int need_aligned; hsize_t head; need_aligned = file->alignment > 1 && size >= file->threshold; while (cur) { file->maxsize = MAX(file->maxsize, cur->size); if (need_aligned) { if ((head = cur->addr % file->alignment) == 0) { /* * Aligned address */ if (cur->size == size) { /* exact match */ ret_value = cur->addr; /* * Make certain we don't hand out a block of raw data * from the free list which overlaps with the metadata * aggregation buffer (if it's turned on) */ if (type == H5FD_MEM_DRAW && (file->feature_flags & H5FD_FEAT_ACCUMULATE_METADATA) && H5F_addr_overlap(ret_value, size, file->accum_loc, file->accum_size)) { ret_value = HADDR_UNDEF; } else { if (prev) prev->next = cur->next; else file->fl[mapped_type] = cur->next; H5FL_FREE(H5FD_free_t, cur); if (size == file->maxsize) file->maxsize = 0; /*unknown*/ HGOTO_DONE(ret_value); } } if (cur->size > size) if (!best || !found_aligned || cur->size < best->size) { best = cur; found_aligned = 1; } } else { /* * Non-aligned address * * Check to see if this block is big enough to skip * to the next aligned address and is still big * enough for the requested size. the extra * cur->size>head is for preventing unsigned * underflow. (this can be improved by checking for * an exact match after excluding the head. Such * match is as good as the found_aligned case above.) */ head = file->alignment - head; /* actual head size */ if (!found_aligned && cur->size > head && cur->size-head >= size && (!best || cur->size < best->size)) best = cur; } } else { /* !need_aligned */ if (cur->size == size) { /* exact match */ ret_value = cur->addr; /* * Make certain we don't hand out a block of raw data * from the free list which overlaps with the metadata * aggregation buffer (if it's turned on) */ if (type == H5FD_MEM_DRAW && (file->feature_flags & H5FD_FEAT_ACCUMULATE_METADATA) && H5F_addr_overlap(ret_value, size, file->accum_loc, file->accum_size)) { ret_value = HADDR_UNDEF; } else { if (prev) prev->next = cur->next; else file->fl[mapped_type] = cur->next; H5FL_FREE(H5FD_free_t, cur); if (size == file->maxsize) file->maxsize = 0; /*unknown*/ HGOTO_DONE(ret_value); } } else { if (cur->size > size && (!best || cur->size < best->size)) best = cur; } } prev = cur; cur = cur->next; } /* Couldn't find exact match, use best fitting piece found */ if (best) { if (best->size == file->maxsize) file->maxsize = 0; /*unknown*/ if (!need_aligned || found_aligned) { /* free only tail */ ret_value = best->addr; /* * Make certain we don't hand out a block of raw data * from the free list which overlaps with the metadata * aggregation buffer (if it's turned on) */ if (type == H5FD_MEM_DRAW && (file->feature_flags & H5FD_FEAT_ACCUMULATE_METADATA) && H5F_addr_overlap(ret_value, size, file->accum_loc, file->accum_size)) { ret_value = HADDR_UNDEF; } else { best->addr += size; /* Reduce size of block on free list */ best->size -= size; HGOTO_DONE(ret_value); } } else { /* * Split into 3 pieces. Keep the the head and tail in the * freelist. */ H5FD_free_t *tmp = NULL; head = file->alignment - (best->addr % file->alignment); ret_value = best->addr + head; /* * Make certain we don't hand out a block of raw data * from the free list which overlaps with the metadata * aggregation buffer (if it's turned on) */ if (type == H5FD_MEM_DRAW && (file->feature_flags & H5FD_FEAT_ACCUMULATE_METADATA) && H5F_addr_overlap(ret_value, size, file->accum_loc, file->accum_size)) { ret_value = HADDR_UNDEF; } else { /* Attempt to allocate memory for temporary node */ tmp = H5FL_MALLOC(H5FD_free_t); #ifdef H5F_DEBUG if (H5DEBUG(F)) HDfprintf(H5DEBUG(F), "%s: 3 pieces, begin best->addr=%a, best->size=%Hd, " "head=%Hd, size=%Hd\n", FUNC, best->addr, best->size, head, size); #endif /* H5F_DEBUG */ assert(tmp); /* bark in debug mode */ if (tmp) { if ((tmp->size = (best->size - head - size))) { tmp->addr = best->addr + head + size; tmp->next = best->next; best->next = tmp; } else { /* no tail piece */ H5FL_FREE(H5FD_free_t,tmp); } } else { /* * Cannot keep the tail piece. Leak file memory. * (Only happens if memory allocation fails) */ } best->size = head; HGOTO_DONE(ret_value); } } } } done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_alloc_metadata * Purpose: Try to allocate SIZE bytes of memory from the metadata * block if possible. * * This is split from H5FD_alloc(). * Return: Success: The format address of the new file memory. * Failure: The undefined address HADDR_UNDEF * Programmer: Bill Wendling * 2. December, 2002 * Modifications: * *------------------------------------------------------------------------- */ static haddr_t H5FD_alloc_metadata(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, hsize_t size) { haddr_t ret_value = HADDR_UNDEF; FUNC_ENTER_NOAPI(H5FD_alloc_metadata, HADDR_UNDEF); /* check args */ assert(file); assert(type >= 0 && type < H5FD_MEM_NTYPES); assert(size > 0); /* * If the metadata aggregation feature is enabled for this VFL * driver, allocate "generic" metadata space and sub-allocate out of * that, if possible. Otherwise just allocate through * H5FD_real_alloc() */ /* * Allocate all types of metadata out of the metadata block */ if (file->feature_flags & H5FD_FEAT_AGGREGATE_METADATA) { /* * Check if the space requested is larger than the space left in * the block */ if (size > file->cur_meta_block_size) { haddr_t new_meta; /* Address for new metadata */ /* * Check if the block asked for is too large for a metadata * block */ if (size >= file->def_meta_block_size) { /* Allocate more room for this new block the regular way */ new_meta = H5FD_real_alloc(file, type, dxpl_id, size); /* * Check if the new metadata is at the end of the current * metadata block */ if (file->eoma + file->cur_meta_block_size == new_meta) { /* * Treat the allocation request as if the current * metadata block grew by the amount allocated and * just update the eoma address. Don't bother * updating the cur_meta_block_size since it will * just grow and shrink by the same amount. */ ret_value = file->eoma; file->eoma += size; } else { /* Use the new metadata block for the space allocated */ ret_value = new_meta; } } else { /* Allocate another metadata block */ new_meta = H5FD_real_alloc(file, H5FD_MEM_DEFAULT, dxpl_id, file->def_meta_block_size); /* * Check if the new metadata is at the end of the current * metadata block */ if (file->eoma + file->cur_meta_block_size == new_meta) { file->cur_meta_block_size += file->def_meta_block_size; } else { /* * Return the unused portion of the metadata block to * a free list */ if (file->eoma != 0) if (H5FD_free(file, H5FD_MEM_DEFAULT, dxpl_id, file->eoma, file->cur_meta_block_size) < 0) HGOTO_ERROR(H5E_VFL, H5E_CANTFREE, HADDR_UNDEF, "can't free metadata block"); /* Point the metadata block at the newly allocated block */ file->eoma = new_meta; file->cur_meta_block_size = file->def_meta_block_size; } /* Allocate space out of the metadata block */ ret_value = file->eoma; file->cur_meta_block_size -= size; file->eoma += size; } } else { /* Allocate space out of the metadata block */ ret_value = file->eoma; file->cur_meta_block_size -= size; file->eoma += size; } } else { /* Allocate data the regular way */ ret_value = H5FD_real_alloc(file, type, dxpl_id, size); } done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_alloc_raw * Purpose: Try to allocate SIZE bytes of raw data. * * This is split from H5FD_alloc(). * Return: Success: The format address of the new file memory. * Failure: The undefined address HADDR_UNDEF * Programmer: Bill Wendling * 2. December, 2002 * Modifications: *------------------------------------------------------------------------- */ static haddr_t H5FD_alloc_raw(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, hsize_t size) { haddr_t ret_value = HADDR_UNDEF; FUNC_ENTER_NOAPI(H5FD_alloc_raw, HADDR_UNDEF); /* check args */ assert(file); assert(type >= 0 && type < H5FD_MEM_NTYPES); assert(size > 0); /* * If the "small data" aggregation feature is enabled for this VFL driver, * allocate "small data" space and sub-allocate out of that, if * possible. Otherwise just allocate through H5FD_real_alloc() */ if (file->feature_flags & H5FD_FEAT_AGGREGATE_SMALLDATA) { /* * Check if the space requested is larger than the space left in * the block */ if (size > file->cur_sdata_block_size) { haddr_t new_data; /* Address for new raw data block */ /* Check if the block asked for is too large for the "small data" block */ if (size >= file->def_sdata_block_size) { /* Allocate more room for this new block the regular way */ new_data = H5FD_real_alloc(file, type, dxpl_id, size); /* * Check if the new raw data is at the end of the current * "small data" block */ if (file->eosda + file->cur_sdata_block_size == new_data) { /* * Treat the allocation request as if the current * "small data" block grew by the amount allocated * and just update the eosda address. Don't bother * updating the cur_sdata_block_size since it will * just grow and shrink by the same amount. */ ret_value = file->eosda; file->eosda += size; } else { /* Use the new "small data" block for the space allocated */ ret_value = new_data; } } else { /* Allocate another "small data" block */ new_data = H5FD_real_alloc(file, type, dxpl_id, file->def_sdata_block_size); /* * Check if the new raw data is at the end of the current * "small data" block */ if (file->eosda + file->cur_sdata_block_size == new_data) { file->cur_sdata_block_size += file->def_sdata_block_size; } else { /* * Return the unused portion of the "small data" * block to a free list */ if (file->eosda != 0) if (H5FD_free(file, H5FD_MEM_DRAW, dxpl_id, file->eosda, file->cur_sdata_block_size) < 0) HGOTO_ERROR(H5E_VFL, H5E_CANTFREE, HADDR_UNDEF, "can't free 'small data' block"); /* * Point the "small data" block at the newly * allocated block */ file->eosda = new_data; file->cur_sdata_block_size = file->def_sdata_block_size; } /* Allocate space out of the "small data" block */ ret_value = file->eosda; file->cur_sdata_block_size -= size; file->eosda += size; } } else { /* Allocate space out of the "small data" block */ ret_value = file->eosda; file->cur_sdata_block_size -= size; file->eosda += size; } } else { /* Allocate data the regular way */ ret_value = H5FD_real_alloc(file, type, dxpl_id, size); } done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_real_alloc * * Purpose: Double private version of H5FDalloc() :-) * * Return: Success: The format address of the new file memory. * * Failure: The undefined address HADDR_UNDEF * * Programmer: Quincey Koziol * Friday, August 25, 2000 * * Modifications: * Albert Cheng, 2001/05/01 * Implement the allocation by alignment/threshold. * *------------------------------------------------------------------------- */ static haddr_t H5FD_real_alloc(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, hsize_t size) { haddr_t ret_value = HADDR_UNDEF; FUNC_ENTER_NOINIT(H5FD_real_alloc); /* check args */ assert(file); assert(file->cls); assert(type >= 0 && type < H5FD_MEM_NTYPES); assert(size > 0); /* * Dispatch to driver `alloc' callback or extend the end-of-address * marker */ if (file->cls->alloc) { if ((ret_value = (file->cls->alloc)(file, type, dxpl_id, size)) == HADDR_UNDEF) HGOTO_ERROR(H5E_VFL, H5E_NOSPACE, HADDR_UNDEF, "driver allocation request failed"); } else { if ((ret_value = H5FD_update_eoa(file, type, dxpl_id, size)) == HADDR_UNDEF) HGOTO_ERROR(H5E_VFL, H5E_NOSPACE, HADDR_UNDEF, "driver eoa update request failed"); } done: FUNC_LEAVE_NOAPI(ret_value); } /* end H5FD_real_alloc() */ /*------------------------------------------------------------------------- * Function: H5FD_update_eoa * Purpose: Update the EOA field of the file's memory. * * This was split off from the H5FD_real_alloc function to * make life easier for all. * Return: Success: The format address of the new file memory. * Failure: The undefined address HADDR_UNDEF * Programmer: Bill Wendling * Wednesday, 04. December, 2002 * Modifications: * *------------------------------------------------------------------------- */ static haddr_t H5FD_update_eoa(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, hsize_t size) { haddr_t eoa, oldeoa = 0; hsize_t wasted; haddr_t ret_value = HADDR_UNDEF; FUNC_ENTER_NOINIT(H5FD_update_eoa); /* check args */ assert(file); assert(file->cls); assert(type >= 0 && type < H5FD_MEM_NTYPES); assert(size > 0); eoa = file->cls->get_eoa(file); #ifdef H5F_DEBUG if (file->alignment * file->threshold != 1 && H5DEBUG(F)) HDfprintf(H5DEBUG(F), "%s: alignment=%Hd, threshold=%Hd, size=%Hd, Begin eoa=%a\n", FUNC, file->alignment, file->threshold, size, eoa); #endif /* H5F_DEBUG */ /* * Wasted is 0 if not exceeding threshold or eoa happens to be * aligned */ wasted = (size >= file->threshold) ? (eoa % file->alignment) : 0; if (wasted) { wasted = file->alignment - wasted; /* actual waste */ oldeoa = eoa; /* save it for later freeing */ /* Advance eoa to the next alignment by allocating the wasted */ if (H5F_addr_overflow(eoa, size) || eoa + wasted > file->maxaddr) HGOTO_ERROR(H5E_VFL, H5E_NOSPACE, HADDR_UNDEF, "file allocation request failed"); eoa += wasted; if (file->cls->set_eoa(file, eoa) < 0) HGOTO_ERROR(H5E_VFL, H5E_NOSPACE, HADDR_UNDEF, "file allocation request failed"); } /* allocate the aligned memory */ if (H5F_addr_overflow(eoa, size) || eoa + size > file->maxaddr) HGOTO_ERROR(H5E_VFL, H5E_NOSPACE, HADDR_UNDEF, "file allocation request failed"); ret_value = eoa; eoa += size; if (file->cls->set_eoa(file, eoa) < 0) HGOTO_ERROR(H5E_VFL, H5E_NOSPACE, HADDR_UNDEF, "file allocation request failed"); /* Free the wasted memory */ if (wasted) H5FD_free(file, type, dxpl_id, oldeoa, wasted); #ifdef H5F_DEBUG if (file->alignment * file->threshold != 1 && H5DEBUG(F)) HDfprintf(H5DEBUG(F), "%s: ret_value=%a, wasted=%Hd, Ended eoa=%a\n", FUNC, ret_value, wasted, eoa); #endif /* H5F_DEBUG */ done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FDfree * * Purpose: Frees format addresses starting with ADDR and continuing for * SIZE bytes in the file FILE. The type of space being freed is * specified by TYPE, which is mapped to a free list as * described for the H5FDalloc() function above. If the request * doesn't map to a free list then either the application `free' * callback is invoked (if defined) or the memory is leaked. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Wednesday, July 28, 1999 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5FDfree(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, haddr_t addr, hsize_t size) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_API(H5FDfree, FAIL); H5TRACE5("e","xMtiah",file,type,dxpl_id,addr,size); /* Check args */ if (!file || !file->cls) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid file pointer"); if (type<0 || type>=H5FD_MEM_NTYPES) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid request type"); if (H5P_DEFAULT == dxpl_id) dxpl_id= H5P_DATASET_XFER_DEFAULT; else if (TRUE!=H5P_isa_class(dxpl_id,H5P_DATASET_XFER)) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data transfer property list"); /* Do the real work */ if (H5FD_free(file, type, dxpl_id, addr, size)<0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "file deallocation request failed"); done: FUNC_LEAVE_API(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_free * * Purpose: Private version of H5FDfree() * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Wednesday, August 4, 1999 * * Modifications: * Bill Wendling, February 20, 2003 * Added support for Flexible PHDF5. If the process is the * Set-Aside-Process, then we execute this function. Clients * don't. * *------------------------------------------------------------------------- */ herr_t H5FD_free(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, haddr_t addr, hsize_t size) { H5FD_mem_t mapped_type; herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_free, FAIL); /* Check args */ assert(file); assert(file->cls); assert(type >= 0 && type < H5FD_MEM_NTYPES); #ifdef H5_HAVE_FPHDF5 /* * When we're using the FPHDF5 driver, allocate from the SAP. If this * is the SAP executing this code, then skip the send to the SAP and * try to do the actual allocations. */ if (H5FD_is_fphdf5_driver(file) && !H5FD_fphdf5_is_sap(file)) { unsigned req_id; H5FP_status_t status; /* Send the request to the SAP */ if (H5FP_request_free(file, type, addr, size, &req_id, &status) != SUCCEED) /* FIXME: Should we check the "status" variable here? */ HGOTO_ERROR(H5E_FPHDF5, H5E_CANTFREE, FAIL, "server couldn't free from file"); /* We've succeeded -- return the value */ HGOTO_DONE(ret_value); } #endif /* H5_HAVE_FPHDF5 */ if (!H5F_addr_defined(addr) || addr>file->maxaddr || H5F_addr_overflow(addr, size) || addr+size>file->maxaddr) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid region"); /* Allow 0-sized free's to occur without penalty */ if(0==size) HGOTO_DONE(SUCCEED); /* Map request type to free list */ if (H5FD_MEM_DEFAULT==file->cls->fl_map[type]) { mapped_type = type; } else { mapped_type = file->cls->fl_map[type]; } /* * If the request maps to a free list then add memory to the free list * without ever telling the driver that it was freed. Otherwise let the * driver deallocate the memory. */ if (mapped_type>=0) { H5FD_free_t *last; /* Last merged node */ H5FD_free_t *last_prev=NULL;/* Pointer to node before merged node */ H5FD_free_t *curr; /* Current free block being inspected */ H5FD_free_t *prev; /* Previous free block being inspected */ /* Adjust the metadata accumulator to remove the freed block, if it overlaps */ if((file->feature_flags&H5FD_FEAT_ACCUMULATE_METADATA) && H5F_addr_overlap(addr,size,file->accum_loc,file->accum_size)) { size_t overlap_size; /* Size of overlap with accumulator */ /* Check for overlapping the beginning of the accumulator */ if(H5F_addr_le(addr,file->accum_loc)) { /* Check for completely overlapping the accumulator */ if(H5F_addr_ge(addr+size,file->accum_loc+file->accum_size)) { /* Reset the entire accumulator */ file->accum_loc=HADDR_UNDEF; file->accum_size=FALSE; file->accum_dirty=FALSE; } /* end if */ /* Block to free must end within the accumulator */ else { size_t new_accum_size; /* Size of new accumulator buffer */ /* Calculate the size of the overlap with the accumulator, etc. */ H5_ASSIGN_OVERFLOW(overlap_size,(addr+size)-file->accum_loc,haddr_t,size_t); new_accum_size=file->accum_size-overlap_size; /* Move the accumulator buffer information to eliminate the freed block */ HDmemmove(file->meta_accum,file->meta_accum+overlap_size,new_accum_size); /* Adjust the accumulator information */ file->accum_loc+=overlap_size; file->accum_size=new_accum_size; } /* end else */ } /* end if */ /* Block to free must start within the accumulator */ else { /* Calculate the size of the overlap with the accumulator */ H5_ASSIGN_OVERFLOW(overlap_size,(file->accum_loc+file->accum_size)-addr,haddr_t,size_t); /* Block to free is in the middle of the accumulator */ if(H5F_addr_lt(addr,file->accum_loc+file->accum_size)) { haddr_t tail_addr; size_t tail_size; /* Calculate the address & size of the tail to write */ tail_addr=addr+size; H5_ASSIGN_OVERFLOW(tail_size,(file->accum_loc+file->accum_size)-tail_addr,haddr_t,size_t); /* Write out the part of the accumulator after the block to free */ /* (Use the driver's write call directly - to avoid looping back and writing to metadata accumulator) */ if ((file->cls->write)(file, H5FD_MEM_DEFAULT, dxpl_id, tail_addr, tail_size, file->meta_accum+(tail_addr-file->accum_loc))<0) HGOTO_ERROR(H5E_VFL, H5E_WRITEERROR, FAIL, "file write request failed"); } /* end if */ /* Adjust the accumulator information */ file->accum_size=file->accum_size-overlap_size; } /* end else */ } /* end if */ /* Scan through the existing blocks for the mapped type to see if we can extend one */ curr=file->fl[mapped_type]; last=prev=NULL; while(curr!=NULL) { /* Check if the block to free adjoins the start of the current block */ if((addr+size)==curr->addr) { /* If we previously found & merged a node, eliminate it from the list & free it */ if(last!=NULL) { /* Check if there was a previous block in the list */ if(last_prev!=NULL) /* Eliminate the merged block from the list */ last_prev->next=last->next; /* No previous block, this must be the head of the list */ else /* Eliminate the merged block from the list */ file->fl[mapped_type] = last->next; /* Check for eliminating the block before the 'current' one */ if(last==prev) prev=last_prev; /* Free the memory for the merged block */ H5FL_FREE(H5FD_free_t,last); } /* end if */ /* Adjust the address and size of the block found */ curr->addr=addr; curr->size+=size; /* Adjust the information about to memory block to include the merged block */ addr=curr->addr; size=curr->size; /* Update the information about the merged node */ last=curr; last_prev=prev; } /* end if */ else { /* Check if the block to free adjoins the end of the current block */ if((curr->addr+curr->size)==addr) { /* If we previously found & merged a node, eliminate it from the list & free it */ if(last!=NULL) { /* Check if there was a previous block in the list */ if(last_prev!=NULL) /* Eliminate the merged block from the list */ last_prev->next=last->next; /* No previous block, this must be the head of the list */ else /* Eliminate the merged block from the list */ file->fl[mapped_type] = last->next; /* Check for eliminating the block before the 'current' one */ if(last==prev) prev=last_prev; /* Free the memory for the merged block */ H5FL_FREE(H5FD_free_t,last); } /* end if */ /* Adjust the size of the block found */ curr->size+=size; /* Adjust the information about to memory block to include the merged block */ addr=curr->addr; size=curr->size; /* Update the information about the merged node */ last=curr; last_prev=prev; } /* end if */ } /* end else */ /* Advance to next node in list */ prev=curr; curr=curr->next; } /* end while */ /* Check if we adjusted an existing block */ if(last!=NULL) { /* Move the node found to the front, if it wasn't already there */ if(last_prev!=NULL) { last_prev->next=last->next; last->next = file->fl[mapped_type]; file->fl[mapped_type] = last; } /* end if */ } /* end if */ else { /* Allocate a new node to hold the free block's information */ if(NULL==(last = H5FL_MALLOC(H5FD_free_t))) HGOTO_ERROR(H5E_FILE, H5E_NOSPACE, FAIL, "can't allocate node for free space info"); last->addr = addr; last->size = size; last->next = file->fl[mapped_type]; file->fl[mapped_type] = last; } /* end else */ /* Check if we increased the size of the largest block on the list */ file->maxsize = MAX(file->maxsize, last->size); /* Check if this free block is at the end of file allocated space. * Truncate it if this is true. */ if(file->cls->get_eoa) { haddr_t eoa; eoa = file->cls->get_eoa(file); if(eoa == (last->addr+last->size)) { if(file->cls->set_eoa(file, last->addr) < 0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "set end of space allocation request failed"); /* Remove this free block from the list */ file->fl[mapped_type] = last->next; if(file->maxsize==last->size) file->maxsize=0; /*unknown*/ H5FL_FREE(H5FD_free_t, last); } } } else if (file->cls->free) { if ((file->cls->free)(file, type, dxpl_id, addr, size)<0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "driver free request failed"); } else { /* leak memory */ HDfprintf(stderr, "%s: LEAKED MEMORY!!!!!!\n", FUNC); } done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FDrealloc * * Purpose: Changes the size of an allocated chunk of memory, possibly * also changing its location in the file. * * Return: Success: New address of the block of memory, not * necessarily the same as the original address. * * Failure: HADDR_UNDEF * * Programmer: Robb Matzke * Tuesday, August 3, 1999 * * Modifications: * *------------------------------------------------------------------------- */ haddr_t H5FDrealloc(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, haddr_t old_addr, hsize_t old_size, hsize_t new_size) { haddr_t ret_value=HADDR_UNDEF; FUNC_ENTER_API(H5FDrealloc, HADDR_UNDEF); H5TRACE6("a","xMtiahh",file,type,dxpl_id,old_addr,old_size,new_size); /* Check args */ if (H5P_DEFAULT == dxpl_id) dxpl_id= H5P_DATASET_XFER_DEFAULT; else if (TRUE!=H5P_isa_class(dxpl_id,H5P_DATASET_XFER)) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, HADDR_UNDEF, "not a data transfer property list"); if (HADDR_UNDEF==(ret_value=H5FD_realloc(file, type, dxpl_id, old_addr, old_size, new_size))) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, HADDR_UNDEF, "file reallocation request failed"); done: FUNC_LEAVE_API(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_realloc * * Purpose: Private version of H5FDrealloc() * * Return: Success: New address of the block of memory, not * necessarily the same as the original address. * * Failure: HADDR_UNDEF * * Programmer: Robb Matzke * Wednesday, August 4, 1999 * * Modifications: * *------------------------------------------------------------------------- */ haddr_t H5FD_realloc(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, haddr_t old_addr, hsize_t old_size, hsize_t new_size) { haddr_t new_addr=old_addr; uint8_t _buf[8192]; uint8_t *buf=_buf; haddr_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5FD_realloc, HADDR_UNDEF); if (new_size==old_size) { /*nothing to do*/ } else if (0==old_size) { /* allocate memory */ assert(!H5F_addr_defined(old_addr)); if (HADDR_UNDEF==(new_addr=H5FD_alloc(file, type, dxpl_id, new_size))) HGOTO_ERROR(H5E_FILE, H5E_NOSPACE, HADDR_UNDEF, "file allocation failed"); } else if (0==new_size) { /* free memory */ assert(H5F_addr_defined(old_addr)); H5FD_free(file, type, dxpl_id, old_addr, old_size); new_addr = HADDR_UNDEF; } else if (new_sizesizeof(size_t) and the * object on disk is too large to read into a memory buffer all at one * time. This chunk of code would have to be re-written using a loop * to move pieces of the realloced data through a fixed size buffer, etc. * -QAK, 6/20/01 */ if (HADDR_UNDEF==(new_addr=H5FD_alloc(file, type, dxpl_id, new_size))) HGOTO_ERROR(H5E_FILE, H5E_NOSPACE, HADDR_UNDEF, "file allocation failed"); H5_CHECK_OVERFLOW(old_size,hsize_t,size_t); if (old_size>sizeof(_buf) && NULL==(buf=H5MM_malloc((size_t)old_size))) { H5FD_free(file, type, dxpl_id, new_addr, new_size); HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, HADDR_UNDEF, "memory allocation failed"); } if (H5FD_read(file, type, dxpl_id, old_addr, (size_t)old_size, buf)<0 || H5FD_write(file, type, dxpl_id, new_addr, (size_t)old_size, buf)<0) { H5FD_free(file, type, dxpl_id, new_addr, new_size); H5MM_xfree(buf); HGOTO_ERROR(H5E_FILE, H5E_READERROR, HADDR_UNDEF, "unable to move file block"); } if (buf!=_buf) H5MM_xfree(buf); H5FD_free(file, type, dxpl_id, old_addr, old_size); } /* Set return value */ ret_value=new_addr; done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FDget_eoa * * Purpose: Returns the address of the first byte after the last * allocated memory in the file. * * Return: Success: First byte after allocated memory. * * Failure: HADDR_UNDEF * * Programmer: Robb Matzke * Friday, July 30, 1999 * * Modifications: * *------------------------------------------------------------------------- */ haddr_t H5FDget_eoa(H5FD_t *file) { haddr_t ret_value; FUNC_ENTER_API(H5FDget_eoa, HADDR_UNDEF); H5TRACE1("a","x",file); /* Check args */ if (!file || !file->cls) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, HADDR_UNDEF, "invalid file pointer"); /* The real work */ if (HADDR_UNDEF==(ret_value=H5FD_get_eoa(file))) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, HADDR_UNDEF, "file get eoa request failed"); done: FUNC_LEAVE_API(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_get_eoa * * Purpose: Private version of H5FDget_eoa() * * Return: Success: First byte after allocated memory. * * Failure: HADDR_UNDEF * * Programmer: Robb Matzke * Wednesday, August 4, 1999 * * Modifications: * *------------------------------------------------------------------------- */ haddr_t H5FD_get_eoa(H5FD_t *file) { haddr_t ret_value; FUNC_ENTER_NOAPI(H5FD_get_eoa, HADDR_UNDEF); assert(file && file->cls); /* Dispatch to driver */ if (HADDR_UNDEF==(ret_value=(file->cls->get_eoa)(file))) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, HADDR_UNDEF, "driver get_eoa request failed"); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FDset_eoa * * Purpose: Set the end-of-address marker for the file. The ADDR is the * address of the first byte past the last allocated byte of the * file. This function is called from two places: * * It is called after an existing file is opened in order to * "allocate" enough space to read the superblock and then * to "allocate" the entire hdf5 file based on the contents * of the superblock. * * It is called during file memory allocation if the * allocation request cannot be satisfied from the free list * and the driver didn't supply an allocation callback. * * Return: Success: Non-negative * * Failure: Negative, no side effect * * Programmer: Robb Matzke * Friday, July 30, 1999 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5FDset_eoa(H5FD_t *file, haddr_t addr) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_API(H5FDset_eoa, FAIL); H5TRACE2("e","xa",file,addr); /* Check args */ if (!file || !file->cls) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid file pointer"); if (!H5F_addr_defined(addr) || addr>file->maxaddr) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid end-of-address value"); /* The real work */ if (H5FD_set_eoa(file, addr)<0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "file set eoa request failed"); done: FUNC_LEAVE_API(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_set_eoa * * Purpose: Private version of H5FDset_eoa() * * Return: Success: Non-negative * * Failure: Negative, no side effect * * Programmer: Robb Matzke * Wednesday, August 4, 1999 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5FD_set_eoa(H5FD_t *file, haddr_t addr) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_set_eoa, FAIL); assert(file && file->cls); assert(H5F_addr_defined(addr) && addr<=file->maxaddr); /* Dispatch to driver */ if ((file->cls->set_eoa)(file, addr)<0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "driver set_eoa request failed"); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FDget_eof * * Purpose: Returns the end-of-file address, which is the greater of the * end-of-format address and the actual EOF marker. This * function is called after an existing file is opened in order * for the library to learn the true size of the underlying file * and to determine whether the hdf5 data has been truncated. * * It is also used when a file is first opened to learn whether * the file is empty or not. * * It is permissible for the driver to return the maximum address * for the file size if the file is not empty. * * Return: Success: The EOF address. * * Failure: HADDR_UNDEF * * Programmer: Robb Matzke * Thursday, July 29, 1999 * * Modifications: * *------------------------------------------------------------------------- */ haddr_t H5FDget_eof(H5FD_t *file) { haddr_t ret_value; FUNC_ENTER_API(H5FDget_eof, HADDR_UNDEF); H5TRACE1("a","x",file); /* Check arguments */ if (!file || !file->cls) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, HADDR_UNDEF, "invalid file pointer"); /* The real work */ if (HADDR_UNDEF==(ret_value=H5FD_get_eof(file))) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, HADDR_UNDEF, "file get eof request failed"); done: FUNC_LEAVE_API(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_get_eof * * Purpose: Private version of H5FDget_eof() * * Return: Success: The EOF address. * * Failure: HADDR_UNDEF * * Programmer: Robb Matzke * Wednesday, August 4, 1999 * * Modifications: * *------------------------------------------------------------------------- */ haddr_t H5FD_get_eof(H5FD_t *file) { haddr_t ret_value; FUNC_ENTER_NOAPI(H5FD_get_eof, HADDR_UNDEF); assert(file && file->cls); /* Dispatch to driver */ if (file->cls->get_eof) { if (HADDR_UNDEF==(ret_value=(file->cls->get_eof)(file))) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, HADDR_UNDEF, "driver get_eof request failed"); } else { ret_value = file->maxaddr; } done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FDread * * Purpose: Reads SIZE bytes from FILE beginning at address ADDR * according to the data transfer property list DXPL_ID (which may * be the constant H5P_DEFAULT). The result is written into the * buffer BUF. * * Return: Success: Non-negative. The read result is written into * the BUF buffer which should be allocated by * the caller. * * Failure: Negative. The contents of BUF is undefined. * * Programmer: Robb Matzke * Thursday, July 29, 1999 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5FDread(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, haddr_t addr, size_t size, void *buf/*out*/) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_API(H5FDread, FAIL); H5TRACE6("e","xMtiazx",file,type,dxpl_id,addr,size,buf); /* Check args */ if (!file || !file->cls) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid file pointer"); /* Get the default dataset transfer property list if the user didn't provide one */ if (H5P_DEFAULT == dxpl_id) dxpl_id= H5P_DATASET_XFER_DEFAULT; else if (TRUE!=H5P_isa_class(dxpl_id,H5P_DATASET_XFER)) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data transfer property list"); if (!buf) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "null result buffer"); /* Do the real work */ if (H5FD_read(file, type, dxpl_id, addr, size, buf)<0) HGOTO_ERROR(H5E_VFL, H5E_READERROR, FAIL, "file read request failed"); done: FUNC_LEAVE_API(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_read * * Purpose: Private version of H5FDread() * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Wednesday, August 4, 1999 * * Modifications: * Albert Cheng, 2000-11-21 * Disable the code that does early return when size==0 for * Parallel mode since a collective call would require the process * to continue on with "nothing" to transfer. * *------------------------------------------------------------------------- */ herr_t H5FD_read(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, haddr_t addr, size_t size, void *buf/*out*/) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_read, FAIL); assert(file && file->cls); assert(H5I_GENPROP_LST==H5I_get_type(dxpl_id)); assert(TRUE==H5P_isa_class(dxpl_id,H5P_DATASET_XFER)); assert(buf); #ifndef H5_HAVE_PARALLEL /* Do not return early for Parallel mode since the I/O could be a */ /* collective transfer. */ /* The no-op case */ if (0==size) HGOTO_DONE(SUCCEED); #endif /* H5_HAVE_PARALLEL */ /* Check if this information is in the metadata accumulator */ if((file->feature_flags&H5FD_FEAT_ACCUMULATE_METADATA) && type!=H5FD_MEM_DRAW) { /* Current read overlaps with metadata accumulator */ if(H5F_addr_overlap(addr,size,file->accum_loc,file->accum_size)) { unsigned char *read_buf=(unsigned char *)buf; /* Pointer to the buffer being read in */ size_t amount_read; /* Amount to read at a time */ #ifndef NDEBUG hsize_t tempamount_read; /* Amount to read at a time */ #endif /* NDEBUG */ hsize_t read_off; /* Offset to read from */ /* Double check that we aren't reading raw data */ assert(type!=H5FD_MEM_DRAW); /* Read the part before the metadata accumulator */ if(addraccum_loc) { /* Set the amount to read */ H5_ASSIGN_OVERFLOW(amount_read,file->accum_loc-addr,hsize_t,size_t); /* Dispatch to driver */ if ((file->cls->read)(file, type, dxpl_id, addr, amount_read, read_buf)<0) HGOTO_ERROR(H5E_VFL, H5E_READERROR, FAIL, "driver read request failed"); /* Adjust the buffer, address & size */ read_buf+=amount_read; addr+=amount_read; size-=amount_read; } /* end if */ /* Copy the part overlapping the metadata accumulator */ if(size>0 && (addr>=file->accum_loc && addr<(file->accum_loc+file->accum_size))) { /* Set the offset to "read" from */ read_off=addr-file->accum_loc; /* Set the amount to "read" */ #ifndef NDEBUG tempamount_read = file->accum_size-read_off; H5_CHECK_OVERFLOW(tempamount_read,hsize_t,size_t); amount_read = MIN(size, (size_t)tempamount_read); #else /* NDEBUG */ amount_read = MIN(size, (size_t)(file->accum_size-read_off)); #endif /* NDEBUG */ /* Copy the data out of the buffer */ HDmemcpy(read_buf,file->meta_accum+read_off,amount_read); /* Adjust the buffer, address & size */ read_buf+=amount_read; addr+=amount_read; size-=amount_read; } /* end if */ /* Read the part after the metadata accumulator */ if(size>0 && addr>=(file->accum_loc+file->accum_size)) { /* Dispatch to driver */ if ((file->cls->read)(file, type, dxpl_id, addr, size, read_buf)<0) HGOTO_ERROR(H5E_VFL, H5E_READERROR, FAIL, "driver read request failed"); /* Adjust the buffer, address & size */ read_buf+=size; addr+=size; size-=size; } /* end if */ /* Make certain we've read it all */ assert(size==0); } /* end if */ /* Current read doesn't overlap with metadata accumulator, read it into accumulator */ else { /* Only update the metadata accumulator if it is not dirty or if * we are allowed to write the accumulator out during reads (when * it is dirty) */ if(file->feature_flags&H5FD_FEAT_ACCUMULATE_METADATA_READ || !file->accum_dirty) { /* Flush current contents, if dirty */ if(file->accum_dirty) { if ((file->cls->write)(file, H5FD_MEM_DEFAULT, dxpl_id, file->accum_loc, file->accum_size, file->meta_accum)<0) HGOTO_ERROR(H5E_VFL, H5E_WRITEERROR, FAIL, "driver write request failed"); /* Reset accumulator dirty flag */ file->accum_dirty=FALSE; } /* end if */ /* Cache the new piece of metadata */ /* Check if we need to resize the buffer */ if(size>file->accum_buf_size) { /* Grow the metadata accumulator buffer */ if ((file->meta_accum=H5FL_BLK_REALLOC(meta_accum,file->meta_accum,size))==NULL) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "unable to allocate metadata accumulator buffer"); /* Note the new buffer size */ file->accum_buf_size=size; } /* end if */ else { /* Check if we should shrink the accumulator buffer */ if(size<(file->accum_buf_size/H5FD_ACCUM_THROTTLE) && file->accum_buf_size>H5FD_ACCUM_THRESHOLD) { size_t new_size=(file->accum_buf_size/H5FD_ACCUM_THROTTLE); /* New size of accumulator buffer */ /* Shrink the accumulator buffer */ if ((file->meta_accum=H5FL_BLK_REALLOC(meta_accum,file->meta_accum,new_size))==NULL) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "unable to allocate metadata accumulator buffer"); /* Note the new buffer size */ file->accum_buf_size=new_size; } /* end if */ } /* end else */ /* Update accumulator information */ file->accum_loc=addr; file->accum_size=size; file->accum_dirty=FALSE; /* Read into accumulator */ if ((file->cls->read)(file, H5FD_MEM_DEFAULT, dxpl_id, file->accum_loc, file->accum_size, file->meta_accum)<0) HGOTO_ERROR(H5E_VFL, H5E_READERROR, FAIL, "driver read request failed"); /* Copy into buffer */ HDmemcpy(buf,file->meta_accum,size); } /* end if */ else { /* Dispatch to driver */ if ((file->cls->read)(file, type, dxpl_id, addr, size, buf)<0) HGOTO_ERROR(H5E_VFL, H5E_READERROR, FAIL, "driver read request failed"); } /* end else */ } /* end else */ } /* end if */ else { /* Dispatch to driver */ if ((file->cls->read)(file, type, dxpl_id, addr, size, buf)<0) HGOTO_ERROR(H5E_VFL, H5E_READERROR, FAIL, "driver read request failed"); } /* end else */ done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FDwrite * * Purpose: Writes SIZE bytes to FILE beginning at address ADDR according * to the data transfer property list DXPL_ID (which may be the * constant H5P_DEFAULT). The bytes to be written come from the * buffer BUF. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Thursday, July 29, 1999 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5FDwrite(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, haddr_t addr, size_t size, const void *buf) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_API(H5FDwrite, FAIL); H5TRACE6("e","xMtiazx",file,type,dxpl_id,addr,size,buf); /* Check args */ if (!file || !file->cls) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid file pointer"); /* Get the default dataset transfer property list if the user didn't provide one */ if (H5P_DEFAULT == dxpl_id) dxpl_id= H5P_DATASET_XFER_DEFAULT; else if (TRUE!=H5P_isa_class(dxpl_id,H5P_DATASET_XFER)) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data transfer property list"); if (!buf) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "null buffer"); /* The real work */ if (H5FD_write(file, type, dxpl_id, addr, size, buf)<0) HGOTO_ERROR(H5E_VFL, H5E_WRITEERROR, FAIL, "file write request failed"); done: FUNC_LEAVE_API(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_write * * Purpose: Private version of H5FDwrite() * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Wednesday, August 4, 1999 * * Modifications: * Albert Cheng, 2000-11-21 * Disable the code that does early return when size==0 for * Parallel mode since a collective call would require the process * to continue on with "nothing" to transfer. * *------------------------------------------------------------------------- */ herr_t H5FD_write(H5FD_t *file, H5FD_mem_t type, hid_t dxpl_id, haddr_t addr, size_t size, const void *buf) { size_t new_size; /* New size of the accumulator buffer */ size_t old_offset; /* Offset of old data within the accumulator buffer */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_write, FAIL); assert(file && file->cls); assert(H5I_GENPROP_LST==H5I_get_type(dxpl_id)); assert(TRUE==H5P_isa_class(dxpl_id,H5P_DATASET_XFER)); assert(buf); #ifndef H5_HAVE_PARALLEL /* Do not return early for Parallel mode since the I/O could be a */ /* collective transfer. */ /* The no-op case */ if (0==size) HGOTO_DONE(SUCCEED); #endif /* H5_HAVE_PARALLEL */ /* Check for accumulating metadata */ if((file->feature_flags&H5FD_FEAT_ACCUMULATE_METADATA) && type!=H5FD_MEM_DRAW) { /* Check if there is already metadata in the accumulator */ if(file->accum_size>0) { /* Check if the piece of metadata being written adjoins or is inside the metadata accumulator */ if((addr>=file->accum_loc && addr<=(file->accum_loc+file->accum_size)) || ((addr+size)>file->accum_loc && (addr+size)<=(file->accum_loc+file->accum_size)) || (addraccum_loc && (addr+size)>=file->accum_loc)) { /* Check if the new metadata adjoins the beginning of the current accumulator */ if((addr+size)==file->accum_loc) { /* Check if we need more buffer space */ if((size+file->accum_size)>file->accum_buf_size) { /* Adjust the buffer size, by doubling it */ file->accum_buf_size = MAX(file->accum_buf_size*2,size+file->accum_size); /* Reallocate the metadata accumulator buffer */ if ((file->meta_accum=H5FL_BLK_REALLOC(meta_accum,file->meta_accum,file->accum_buf_size))==NULL) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "unable to allocate metadata accumulator buffer"); } /* end if */ /* Move the existing metadata to the proper location */ HDmemmove(file->meta_accum+size,file->meta_accum,file->accum_size); /* Copy the new metadata at the front */ HDmemcpy(file->meta_accum,buf,size); /* Set the new size & location of the metadata accumulator */ file->accum_loc=addr; file->accum_size=file->accum_size+size; /* Mark it as written to */ file->accum_dirty=TRUE; } /* end if */ /* Check if the new metadata adjoins the end of the current accumulator */ else if(addr==(file->accum_loc+file->accum_size)) { /* Check if we need more buffer space */ if((size+file->accum_size)>file->accum_buf_size) { /* Adjust the buffer size, by doubling it */ file->accum_buf_size = MAX(file->accum_buf_size*2,size+file->accum_size); /* Reallocate the metadata accumulator buffer */ if ((file->meta_accum=H5FL_BLK_REALLOC(meta_accum,file->meta_accum,file->accum_buf_size))==NULL) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "unable to allocate metadata accumulator buffer"); } /* end if */ /* Copy the new metadata to the end */ HDmemcpy(file->meta_accum+file->accum_size,buf,size); /* Set the new size of the metadata accumulator */ file->accum_size=file->accum_size+size; /* Mark it as written to */ file->accum_dirty=TRUE; } /* end if */ /* Check if the new metadata is entirely within the current accumulator */ else if(addr>=file->accum_loc && (addr+size)<=(file->accum_loc+file->accum_size)) { /* Copy the new metadata to the proper location within the accumulator */ HDmemcpy(file->meta_accum+(addr-file->accum_loc),buf,size); /* Mark it as written to */ file->accum_dirty=TRUE; } /* end if */ /* Check if the new metadata overlaps the beginning of the current accumulator */ else if(addraccum_loc && (addr+size)<=(file->accum_loc+file->accum_size)) { /* Calculate the new accumulator size, based on the amount of overlap */ H5_ASSIGN_OVERFLOW(new_size,(file->accum_loc-addr)+file->accum_size,hsize_t,size_t); /* Check if we need more buffer space */ if(new_size>file->accum_buf_size) { /* Adjust the buffer size, by doubling it */ file->accum_buf_size = MAX(file->accum_buf_size*2,new_size); /* Reallocate the metadata accumulator buffer */ if ((file->meta_accum=H5FL_BLK_REALLOC(meta_accum,file->meta_accum,file->accum_buf_size))==NULL) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "unable to allocate metadata accumulator buffer"); } /* end if */ /* Calculate the proper offset of the existing metadata */ H5_ASSIGN_OVERFLOW(old_offset,(addr+size)-file->accum_loc,hsize_t,size_t); /* Move the existing metadata to the proper location */ HDmemmove(file->meta_accum+size,file->meta_accum+old_offset,(file->accum_size-old_offset)); /* Copy the new metadata at the front */ HDmemcpy(file->meta_accum,buf,size); /* Set the new size & location of the metadata accumulator */ file->accum_loc=addr; file->accum_size=new_size; /* Mark it as written to */ file->accum_dirty=TRUE; } /* end if */ /* Check if the new metadata overlaps the end of the current accumulator */ else if(addr>=file->accum_loc && (addr+size)>(file->accum_loc+file->accum_size)) { /* Calculate the new accumulator size, based on the amount of overlap */ H5_ASSIGN_OVERFLOW(new_size,(addr-file->accum_loc)+size,hsize_t,size_t); /* Check if we need more buffer space */ if(new_size>file->accum_buf_size) { /* Adjust the buffer size, by doubling it */ file->accum_buf_size = MAX(file->accum_buf_size*2,new_size); /* Reallocate the metadata accumulator buffer */ if ((file->meta_accum=H5FL_BLK_REALLOC(meta_accum,file->meta_accum,file->accum_buf_size))==NULL) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "unable to allocate metadata accumulator buffer"); } /* end if */ /* Copy the new metadata to the end */ HDmemcpy(file->meta_accum+(addr-file->accum_loc),buf,size); /* Set the new size & location of the metadata accumulator */ file->accum_loc=addr; file->accum_size=new_size; /* Mark it as written to */ file->accum_dirty=TRUE; } /* end if */ else { assert(0 && "New metadata overlapped both beginning and end of existing metadata accumulator!"); } /* end else */ } /* end if */ /* New piece of metadata doesn't adjoin or overlap the existing accumulator */ else { /* Write out the existing metadata accumulator, with dispatch to driver */ if(file->accum_dirty) { if ((file->cls->write)(file, H5FD_MEM_DEFAULT, dxpl_id, file->accum_loc, file->accum_size, file->meta_accum)<0) HGOTO_ERROR(H5E_VFL, H5E_WRITEERROR, FAIL, "driver write request failed"); /* Reset accumulator dirty flag */ file->accum_dirty=FALSE; } /* end if */ /* Cache the new piece of metadata */ /* Check if we need to resize the buffer */ if(size>file->accum_buf_size) { /* Grow the metadata accumulator buffer */ if ((file->meta_accum=H5FL_BLK_REALLOC(meta_accum,file->meta_accum,size))==NULL) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "unable to allocate metadata accumulator buffer"); /* Note the new buffer size */ file->accum_buf_size=size; } /* end if */ else { /* Check if we should shrink the accumulator buffer */ if(size<(file->accum_buf_size/H5FD_ACCUM_THROTTLE) && file->accum_buf_size>H5FD_ACCUM_THRESHOLD) { size_t tmp_size=(file->accum_buf_size/H5FD_ACCUM_THROTTLE); /* New size of accumulator buffer */ /* Shrink the accumulator buffer */ if ((file->meta_accum=H5FL_BLK_REALLOC(meta_accum,file->meta_accum,tmp_size))==NULL) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "unable to allocate metadata accumulator buffer"); /* Note the new buffer size */ file->accum_buf_size=tmp_size; } /* end if */ } /* end else */ /* Update the metadata accumulator information */ file->accum_loc=addr; file->accum_size=size; file->accum_dirty=TRUE; /* Store the piece of metadata in the accumulator */ HDmemcpy(file->meta_accum,buf,size); } /* end else */ } /* end if */ /* No metadata in the accumulator, grab this piece and keep it */ else { /* Check if we need to reallocate the buffer */ if(size>file->accum_buf_size) { /* Reallocate the metadata accumulator buffer */ if ((file->meta_accum=H5FL_BLK_REALLOC(meta_accum,file->meta_accum,size))==NULL) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "unable to allocate metadata accumulator buffer"); /* Note the new buffer size */ file->accum_buf_size=size; } /* end if */ /* Update the metadata accumulator information */ file->accum_loc=addr; file->accum_size=size; file->accum_dirty=TRUE; /* Store the piece of metadata in the accumulator */ HDmemcpy(file->meta_accum,buf,size); } /* end else */ } /* end if */ else { /* Dispatch to driver */ if ((file->cls->write)(file, type, dxpl_id, addr, size, buf)<0) HGOTO_ERROR(H5E_VFL, H5E_WRITEERROR, FAIL, "driver write request failed"); } /* end else */ done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FDflush * * Purpose: Notify driver to flush all cached data. If the driver has no * flush method then nothing happens. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Thursday, July 29, 1999 * * Modifications: * Quincey Koziol, May 20, 2002 * Added 'closing' parameter * *------------------------------------------------------------------------- */ herr_t H5FDflush(H5FD_t *file, hid_t dxpl_id, unsigned closing) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_API(H5FDflush, FAIL); H5TRACE3("e","xiIu",file,dxpl_id,closing); /* Check args */ if (!file || !file->cls) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid file pointer"); if (H5P_DEFAULT == dxpl_id) dxpl_id= H5P_DATASET_XFER_DEFAULT; else if (TRUE!=H5P_isa_class(dxpl_id,H5P_DATASET_XFER)) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data transfer property list"); /* Do the real work */ if (H5FD_flush(file,dxpl_id,closing)<0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "file flush request failed"); done: FUNC_LEAVE_API(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_flush * * Purpose: Private version of H5FDflush() * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Wednesday, August 4, 1999 * * Modifications: * Quincey Koziol, May 20, 2002 * Added 'closing' parameter * *------------------------------------------------------------------------- */ herr_t H5FD_flush(H5FD_t *file, hid_t dxpl_id, unsigned closing) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_flush, FAIL); assert(file && file->cls); /* Check if we need to flush out the metadata accumulator */ if((file->feature_flags&H5FD_FEAT_ACCUMULATE_METADATA) && file->accum_dirty && file->accum_size>0) { /* Flush the metadata contents */ /* Not certain if the type and dxpl should be the way they are... -QAK */ if ((file->cls->write)(file, H5FD_MEM_DEFAULT, dxpl_id, file->accum_loc, file->accum_size, file->meta_accum)<0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "driver write request failed"); /* Reset the dirty flag */ file->accum_dirty=FALSE; } /* end if */ if (file->cls->flush && (file->cls->flush)(file,dxpl_id,closing)<0) HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "driver flush request failed"); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5FD_get_fileno * * Purpose: Quick and dirty routine to retrieve the file's 'fileno' value * (Mainly added to stop non-file routines from poking about in the * H5FD_t data structure) * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * March 27, 2002 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5FD_get_fileno(const H5FD_t *file, unsigned long *filenum) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_get_fileno, FAIL); assert(file); assert(filenum); /* Retrieve the file's serial number */ HDmemcpy(filenum,&file->fileno,sizeof(file->fileno)); done: FUNC_LEAVE_NOAPI(ret_value); } /* end H5FD_get_fileno() */ /*-------------------------------------------------------------------------- * Function: H5FDget_vfd_handle * * Purpose: Returns a pointer to the file handle of low-level virtual * file driver. * * Return: Non-negative if succeed; negative otherwise. * * Programmer: Raymond Lu * Sep. 16, 2002 * * Modifications: * *-------------------------------------------------------------------------- */ herr_t H5FDget_vfd_handle(H5FD_t *file, hid_t fapl, void** file_handle) { herr_t ret_value; FUNC_ENTER_API(H5FDget_vfd_handle, FAIL); /* Check arguments */ assert(file); assert(file_handle); ret_value=H5FD_get_vfd_handle(file, fapl, file_handle); done: FUNC_LEAVE_API(ret_value); } /*-------------------------------------------------------------------------- * Function: H5FD_get_vfd_handle * * Purpose: Retrieve the file handle for file driver. * * Return: Non-negative if succeed; negative if fails. * * Programmer: Raymond Lu * Sep. 16, 2002 * * Modifications: * *-------------------------------------------------------------------------- */ herr_t H5FD_get_vfd_handle(H5FD_t *file, hid_t fapl, void** file_handle) { herr_t ret_value = SUCCEED; FUNC_ENTER_NOAPI(H5FD_get_vfd_handle, FAIL); assert(file_handle); if(file->cls->get_handle && ((ret_value=file->cls->get_handle(file, fapl, file_handle)) < 0)) HGOTO_ERROR(H5E_FILE, H5E_CANTGET, FAIL, "can't get file handle for file driver"); done: FUNC_LEAVE_NOAPI(ret_value); }