/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the COPYING file, which can be found at the root of the source code * * distribution tree, or in https://www.hdfgroup.org/licenses. * * If you do not have access to either file, you may request a copy from * * help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Programmer: Raymond Lu * Wednesday, 20 September 2006 * * Purpose: The Direct I/O file driver forces the data to be written to * the file directly without being copied into system kernel * buffer. The main system support this feature is Linux. */ #include "H5FDdrvr_module.h" /* This source code file is part of the H5FD driver module */ #include "H5private.h" /* Generic Functions */ #include "H5Eprivate.h" /* Error handling */ #include "H5Fprivate.h" /* File access */ #include "H5FDprivate.h" /* File drivers */ #include "H5FDdirect.h" /* Direct file driver */ #include "H5FLprivate.h" /* Free Lists */ #include "H5Iprivate.h" /* IDs */ #include "H5MMprivate.h" /* Memory management */ #include "H5Pprivate.h" /* Property lists */ #ifdef H5_HAVE_DIRECT /* The driver identification number, initialized at runtime */ static hid_t H5FD_DIRECT_g = 0; /* Whether to ignore file locks when disabled (env var value) */ static htri_t ignore_disabled_file_locks_s = FAIL; /* File operations */ #define OP_UNKNOWN 0 #define OP_READ 1 #define OP_WRITE 2 /* Driver-specific file access properties */ typedef struct H5FD_direct_fapl_t { size_t mboundary; /* Memory boundary for alignment */ size_t fbsize; /* File system block size */ size_t cbsize; /* Maximal buffer size for copying user data */ hbool_t must_align; /* Decides if data alignment is required */ } H5FD_direct_fapl_t; /* * The description of a file belonging to this driver. The `eoa' and `eof' * determine the amount of hdf5 address space in use and the high-water mark * of the file (the current size of the underlying Unix file). The `pos' * value is used to eliminate file position updates when they would be a * no-op. Unfortunately we've found systems that use separate file position * indicators for reading and writing so the lseek can only be eliminated if * the current operation is the same as the previous operation. When opening * a file the `eof' will be set to the current file size, `eoa' will be set * to zero, `pos' will be set to H5F_ADDR_UNDEF (as it is when an error * occurs), and `op' will be set to H5F_OP_UNKNOWN. */ typedef struct H5FD_direct_t { H5FD_t pub; /*public stuff, must be first */ int fd; /*the unix file */ haddr_t eoa; /*end of allocated region */ haddr_t eof; /*end of file; current file size*/ haddr_t pos; /*current file I/O position */ int op; /*last operation */ H5FD_direct_fapl_t fa; /*file access properties */ hbool_t ignore_disabled_file_locks; #ifndef H5_HAVE_WIN32_API /* * On most systems the combination of device and i-node number uniquely * identify a file. */ dev_t device; /*file device number */ ino_t inode; /*file i-node number */ #else /* * On H5_HAVE_WIN32_API the low-order word of a unique identifier associated with the * file and the volume serial number uniquely identify a file. This number * (which, both? -rpm) may change when the system is restarted or when the * file is opened. After a process opens a file, the identifier is * constant until the file is closed. An application can use this * identifier and the volume serial number to determine whether two * handles refer to the same file. */ DWORD fileindexlo; DWORD fileindexhi; #endif } H5FD_direct_t; /* * These macros check for overflow of various quantities. These macros * assume that HDoff_t is signed and haddr_t and size_t are unsigned. * * ADDR_OVERFLOW: Checks whether a file address of type `haddr_t' * is too large to be represented by the second argument * of the file seek function. * * SIZE_OVERFLOW: Checks whether a buffer size of type `hsize_t' is too * large to be represented by the `size_t' type. * * REGION_OVERFLOW: Checks whether an address and size pair describe data * which can be addressed entirely by the second * argument of the file seek function. */ #define MAXADDR (((haddr_t)1 << (8 * sizeof(HDoff_t) - 1)) - 1) #define ADDR_OVERFLOW(A) (HADDR_UNDEF == (A) || ((A) & ~(haddr_t)MAXADDR)) #define SIZE_OVERFLOW(Z) ((Z) & ~(hsize_t)MAXADDR) #define REGION_OVERFLOW(A, Z) \ (ADDR_OVERFLOW(A) || SIZE_OVERFLOW(Z) || HADDR_UNDEF == (A) + (Z) || (HDoff_t)((A) + (Z)) < (HDoff_t)(A)) /* Prototypes */ static herr_t H5FD__direct_term(void); static herr_t H5FD__direct_populate_config(size_t boundary, size_t block_size, size_t cbuf_size, H5FD_direct_fapl_t *fa_out); static void *H5FD__direct_fapl_get(H5FD_t *file); static void *H5FD__direct_fapl_copy(const void *_old_fa); static H5FD_t *H5FD__direct_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr); static herr_t H5FD__direct_close(H5FD_t *_file); static int H5FD__direct_cmp(const H5FD_t *_f1, const H5FD_t *_f2); static herr_t H5FD__direct_query(const H5FD_t *_f1, unsigned long *flags); static haddr_t H5FD__direct_get_eoa(const H5FD_t *_file, H5FD_mem_t type); static herr_t H5FD__direct_set_eoa(H5FD_t *_file, H5FD_mem_t type, haddr_t addr); static haddr_t H5FD__direct_get_eof(const H5FD_t *_file, H5FD_mem_t type); static herr_t H5FD__direct_get_handle(H5FD_t *_file, hid_t fapl, void **file_handle); static herr_t H5FD__direct_read(H5FD_t *_file, H5FD_mem_t type, hid_t fapl_id, haddr_t addr, size_t size, void *buf); static herr_t H5FD__direct_write(H5FD_t *_file, H5FD_mem_t type, hid_t fapl_id, haddr_t addr, size_t size, const void *buf); static herr_t H5FD__direct_truncate(H5FD_t *_file, hid_t dxpl_id, hbool_t closing); static herr_t H5FD__direct_lock(H5FD_t *_file, hbool_t rw); static herr_t H5FD__direct_unlock(H5FD_t *_file); static herr_t H5FD__direct_delete(const char *filename, hid_t fapl_id); static const H5FD_class_t H5FD_direct_g = { H5FD_CLASS_VERSION, /* struct version */ H5FD_DIRECT_VALUE, /* value */ "direct", /* name */ MAXADDR, /* maxaddr */ H5F_CLOSE_WEAK, /* fc_degree */ H5FD__direct_term, /* terminate */ NULL, /* sb_size */ NULL, /* sb_encode */ NULL, /* sb_decode */ sizeof(H5FD_direct_fapl_t), /* fapl_size */ H5FD__direct_fapl_get, /* fapl_get */ H5FD__direct_fapl_copy, /* fapl_copy */ NULL, /* fapl_free */ 0, /* dxpl_size */ NULL, /* dxpl_copy */ NULL, /* dxpl_free */ H5FD__direct_open, /* open */ H5FD__direct_close, /* close */ H5FD__direct_cmp, /* cmp */ H5FD__direct_query, /* query */ NULL, /* get_type_map */ NULL, /* alloc */ NULL, /* free */ H5FD__direct_get_eoa, /* get_eoa */ H5FD__direct_set_eoa, /* set_eoa */ H5FD__direct_get_eof, /* get_eof */ H5FD__direct_get_handle, /* get_handle */ H5FD__direct_read, /* read */ H5FD__direct_write, /* write */ NULL, /* read_vector */ NULL, /* write_vector */ NULL, /* read_selection */ NULL, /* write_selection */ NULL, /* flush */ H5FD__direct_truncate, /* truncate */ H5FD__direct_lock, /* lock */ H5FD__direct_unlock, /* unlock */ H5FD__direct_delete, /* del */ NULL, /* ctl */ H5FD_FLMAP_DICHOTOMY /* fl_map */ }; /* Declare a free list to manage the H5FD_direct_t struct */ H5FL_DEFINE_STATIC(H5FD_direct_t); /*------------------------------------------------------------------------- * Function: H5FD_direct_init * * Purpose: Initialize this driver by registering the driver with the * library. * * Return: Success: The driver ID for the direct driver * Failure: H5I_INVALID_HID * * Programmer: Raymond Lu * Wednesday, 20 September 2006 * *------------------------------------------------------------------------- */ hid_t H5FD_direct_init(void) { char *lock_env_var = NULL; /* Environment variable pointer */ hid_t ret_value = H5I_INVALID_HID; /* Return value */ FUNC_ENTER_NOAPI(H5I_INVALID_HID) /* Check the use disabled file locks environment variable */ lock_env_var = HDgetenv(HDF5_USE_FILE_LOCKING); if (lock_env_var && !HDstrcmp(lock_env_var, "BEST_EFFORT")) ignore_disabled_file_locks_s = TRUE; /* Override: Ignore disabled locks */ else if (lock_env_var && (!HDstrcmp(lock_env_var, "TRUE") || !HDstrcmp(lock_env_var, "1"))) ignore_disabled_file_locks_s = FALSE; /* Override: Don't ignore disabled locks */ else ignore_disabled_file_locks_s = FAIL; /* Environment variable not set, or not set correctly */ if (H5I_VFL != H5I_get_type(H5FD_DIRECT_g)) { H5FD_DIRECT_g = H5FD_register(&H5FD_direct_g, sizeof(H5FD_class_t), FALSE); if (H5I_INVALID_HID == H5FD_DIRECT_g) HGOTO_ERROR(H5E_ID, H5E_CANTREGISTER, H5I_INVALID_HID, "unable to register direct"); } /* Set return value */ ret_value = H5FD_DIRECT_g; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_direct_init() */ /*--------------------------------------------------------------------------- * Function: H5FD__direct_term * * Purpose: Shut down the VFD * * Returns: Non-negative on success or negative on failure * * Programmer: Raymond Lu * Wednesday, 20 September 2006 * *--------------------------------------------------------------------------- */ static herr_t H5FD__direct_term(void) { FUNC_ENTER_PACKAGE_NOERR /* Reset VFL ID */ H5FD_DIRECT_g = 0; FUNC_LEAVE_NOAPI(SUCCEED) } /* end H5FD__direct_term() */ /*------------------------------------------------------------------------- * Function: H5Pset_fapl_direct * * Purpose: Modify the file access property list to use the H5FD_DIRECT * driver defined in this source file. There are no driver * specific properties. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Wednesday, 20 September 2006 * *------------------------------------------------------------------------- */ herr_t H5Pset_fapl_direct(hid_t fapl_id, size_t boundary, size_t block_size, size_t cbuf_size) { H5P_genplist_t *plist; /* Property list pointer */ H5FD_direct_fapl_t fa; herr_t ret_value; FUNC_ENTER_API(FAIL) H5TRACE4("e", "izzz", fapl_id, boundary, block_size, cbuf_size); if (NULL == (plist = H5P_object_verify(fapl_id, H5P_FILE_ACCESS))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list") if (H5FD__direct_populate_config(boundary, block_size, cbuf_size, &fa) < 0) HGOTO_ERROR(H5E_VFL, H5E_CANTSET, FAIL, "can't initialize driver configuration info") ret_value = H5P_set_driver(plist, H5FD_DIRECT, &fa, NULL); done: FUNC_LEAVE_API(ret_value) } /*------------------------------------------------------------------------- * Function: H5Pget_fapl_direct * * Purpose: Returns information about the direct file access property * list though the function arguments. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Raymond Lu * Wednesday, October 18, 2006 * *------------------------------------------------------------------------- */ herr_t H5Pget_fapl_direct(hid_t fapl_id, size_t *boundary /*out*/, size_t *block_size /*out*/, size_t *cbuf_size /*out*/) { H5P_genplist_t *plist; /* Property list pointer */ const H5FD_direct_fapl_t *fa; herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_API(FAIL) H5TRACE4("e", "ixxx", fapl_id, boundary, block_size, cbuf_size); if (NULL == (plist = H5P_object_verify(fapl_id, H5P_FILE_ACCESS))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access list") if (H5FD_DIRECT != H5P_peek_driver(plist)) HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "incorrect VFL driver") if (NULL == (fa = H5P_peek_driver_info(plist))) HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "bad VFL driver info") if (boundary) *boundary = fa->mboundary; if (block_size) *block_size = fa->fbsize; if (cbuf_size) *cbuf_size = fa->cbsize; done: FUNC_LEAVE_API(ret_value) } /* end H5Pget_fapl_direct() */ /*------------------------------------------------------------------------- * Function: H5FD__direct_populate_config * * Purpose: Populates a H5FD_direct_fapl_t structure with the provided * values, supplying defaults where values are not provided. * * Return: Non-negative on success/Negative on failure * *------------------------------------------------------------------------- */ static herr_t H5FD__direct_populate_config(size_t boundary, size_t block_size, size_t cbuf_size, H5FD_direct_fapl_t *fa_out) { herr_t ret_value = SUCCEED; FUNC_ENTER_PACKAGE HDassert(fa_out); HDmemset(fa_out, 0, sizeof(H5FD_direct_fapl_t)); if (boundary != 0) fa_out->mboundary = boundary; else fa_out->mboundary = MBOUNDARY_DEF; if (block_size != 0) fa_out->fbsize = block_size; else fa_out->fbsize = FBSIZE_DEF; if (cbuf_size != 0) fa_out->cbsize = cbuf_size; else fa_out->cbsize = CBSIZE_DEF; /* Set the default to be true for data alignment */ fa_out->must_align = TRUE; /* Copy buffer size must be a multiple of file block size */ if (fa_out->cbsize % fa_out->fbsize != 0) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "copy buffer size must be a multiple of block size") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD__direct_populate_config() */ /*------------------------------------------------------------------------- * Function: H5FD__direct_fapl_get * * Purpose: Returns a file access property list which indicates how the * specified file is being accessed. The return list could be * used to access another file the same way. * * Return: Success: Ptr to new file access property list with all * members copied from the file struct. * * Failure: NULL * * Programmer: Raymond Lu * Wednesday, 18 October 2006 * *------------------------------------------------------------------------- */ static void * H5FD__direct_fapl_get(H5FD_t *_file) { H5FD_direct_t *file = (H5FD_direct_t *)_file; void *ret_value = NULL; /* Return value */ FUNC_ENTER_PACKAGE_NOERR /* Set return value */ ret_value = H5FD__direct_fapl_copy(&(file->fa)); FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD__direct_fapl_get() */ /*------------------------------------------------------------------------- * Function: H5FD__direct_fapl_copy * * Purpose: Copies the direct-specific file access properties. * * Return: Success: Ptr to a new property list * * Failure: NULL * * Programmer: Raymond Lu * Wednesday, 18 October 2006 * *------------------------------------------------------------------------- */ static void * H5FD__direct_fapl_copy(const void *_old_fa) { const H5FD_direct_fapl_t *old_fa = (const H5FD_direct_fapl_t *)_old_fa; H5FD_direct_fapl_t *new_fa = H5MM_calloc(sizeof(H5FD_direct_fapl_t)); FUNC_ENTER_PACKAGE_NOERR HDassert(new_fa); /* Copy the general information */ H5MM_memcpy(new_fa, old_fa, sizeof(H5FD_direct_fapl_t)); FUNC_LEAVE_NOAPI(new_fa) } /* end H5FD__direct_fapl_copy() */ /*------------------------------------------------------------------------- * Function: H5FD__direct_open * * Purpose: Create and/or opens a Unix file for direct I/O as an HDF5 file. * * Return: Success: A pointer to a new file data structure. The * public fields will be initialized by the * caller, which is always H5FD_open(). * * Failure: NULL * * Programmer: Raymond Lu * Wednesday, 20 September 2006 * *------------------------------------------------------------------------- */ static H5FD_t * H5FD__direct_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr) { int o_flags; int fd = (-1); H5FD_direct_t *file = NULL; const H5FD_direct_fapl_t *fa; H5FD_direct_fapl_t default_fa; #ifdef H5_HAVE_WIN32_API HFILE filehandle; struct _BY_HANDLE_FILE_INFORMATION fileinfo; #endif h5_stat_t sb; H5P_genplist_t *plist; /* Property list */ void *buf1, *buf2; H5FD_t *ret_value = NULL; FUNC_ENTER_PACKAGE /* Sanity check on file offsets */ HDassert(sizeof(HDoff_t) >= sizeof(size_t)); /* Check arguments */ if (!name || !*name) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL, "invalid file name") if (0 == maxaddr || HADDR_UNDEF == maxaddr) HGOTO_ERROR(H5E_ARGS, H5E_BADRANGE, NULL, "bogus maxaddr") if (ADDR_OVERFLOW(maxaddr)) HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, NULL, "bogus maxaddr") /* Build the open flags */ o_flags = (H5F_ACC_RDWR & flags) ? O_RDWR : O_RDONLY; if (H5F_ACC_TRUNC & flags) o_flags |= O_TRUNC; if (H5F_ACC_CREAT & flags) o_flags |= O_CREAT; if (H5F_ACC_EXCL & flags) o_flags |= O_EXCL; /* Flag for Direct I/O */ o_flags |= O_DIRECT; /* Open the file */ if ((fd = HDopen(name, o_flags, H5_POSIX_CREATE_MODE_RW)) < 0) HSYS_GOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to open file") if (HDfstat(fd, &sb) < 0) HSYS_GOTO_ERROR(H5E_FILE, H5E_BADFILE, NULL, "unable to fstat file") /* Create the new file struct */ if (NULL == (file = H5FL_CALLOC(H5FD_direct_t))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "unable to allocate file struct") /* Get the driver specific information */ if (NULL == (plist = H5P_object_verify(fapl_id, H5P_FILE_ACCESS))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a file access property list") if (NULL == (fa = (const H5FD_direct_fapl_t *)H5P_peek_driver_info(plist))) { if (H5FD__direct_populate_config(0, 0, 0, &default_fa) < 0) HGOTO_ERROR(H5E_VFL, H5E_CANTSET, NULL, "can't initialize driver configuration info") fa = &default_fa; } file->fd = fd; H5_CHECKED_ASSIGN(file->eof, haddr_t, sb.st_size, h5_stat_size_t); file->pos = HADDR_UNDEF; file->op = OP_UNKNOWN; #ifdef H5_HAVE_WIN32_API filehandle = _get_osfhandle(fd); (void)GetFileInformationByHandle((HANDLE)filehandle, &fileinfo); file->fileindexhi = fileinfo.nFileIndexHigh; file->fileindexlo = fileinfo.nFileIndexLow; #else file->device = sb.st_dev; file->inode = sb.st_ino; #endif /*H5_HAVE_WIN32_API*/ file->fa.mboundary = fa->mboundary; file->fa.fbsize = fa->fbsize; file->fa.cbsize = fa->cbsize; /* Check the file locking flags in the fapl */ if (ignore_disabled_file_locks_s != FAIL) /* The environment variable was set, so use that preferentially */ file->ignore_disabled_file_locks = ignore_disabled_file_locks_s; else { /* Use the value in the property list */ if (H5P_get(plist, H5F_ACS_IGNORE_DISABLED_FILE_LOCKS_NAME, &file->ignore_disabled_file_locks) < 0) HGOTO_ERROR(H5E_VFL, H5E_CANTGET, NULL, "can't get ignore disabled file locks property") } /* Try to decide if data alignment is required. The reason to check it here * is to handle correctly the case that the file is in a different file system * than the one where the program is running. */ /* NOTE: Use HDmalloc and HDfree here to ensure compatibility with * HDposix_memalign. */ buf1 = HDmalloc(sizeof(int)); if (HDposix_memalign(&buf2, file->fa.mboundary, file->fa.fbsize) != 0) HGOTO_ERROR(H5E_RESOURCE, H5E_CANTALLOC, NULL, "HDposix_memalign failed") if (o_flags & O_CREAT) { if (HDwrite(file->fd, buf1, sizeof(int)) < 0) { if (HDwrite(file->fd, buf2, file->fa.fbsize) < 0) HGOTO_ERROR(H5E_FILE, H5E_WRITEERROR, NULL, "file system may not support Direct I/O") else file->fa.must_align = TRUE; } else { file->fa.must_align = FALSE; if (-1 == HDftruncate(file->fd, (HDoff_t)0)) HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, NULL, "unable to truncate file") } } else { if (HDread(file->fd, buf1, sizeof(int)) < 0) { if (HDread(file->fd, buf2, file->fa.fbsize) < 0) HGOTO_ERROR(H5E_FILE, H5E_READERROR, NULL, "file system may not support Direct I/O") else file->fa.must_align = TRUE; } else { if (o_flags & O_RDWR) { if (HDlseek(file->fd, (HDoff_t)0, SEEK_SET) < 0) HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, NULL, "unable to seek to proper position") if (HDwrite(file->fd, buf1, sizeof(int)) < 0) file->fa.must_align = TRUE; else file->fa.must_align = FALSE; } else file->fa.must_align = FALSE; } } if (buf1) HDfree(buf1); if (buf2) HDfree(buf2); /* Set return value */ ret_value = (H5FD_t *)file; done: if (ret_value == NULL) { if (fd >= 0) HDclose(fd); } /* end if */ FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD__direct_close * * Purpose: Closes the file. * * Return: Success: 0 * * Failure: -1, file not closed. * * Programmer: Raymond Lu * Wednesday, 20 September 2006 * *------------------------------------------------------------------------- */ static herr_t H5FD__direct_close(H5FD_t *_file) { H5FD_direct_t *file = (H5FD_direct_t *)_file; herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_PACKAGE if (HDclose(file->fd) < 0) HSYS_GOTO_ERROR(H5E_IO, H5E_CANTCLOSEFILE, FAIL, "unable to close file") H5FL_FREE(H5FD_direct_t, file); done: FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD__direct_cmp * * Purpose: Compares two files belonging to this driver using an * arbitrary (but consistent) ordering. * * Return: Success: A value like strcmp() * * Failure: never fails (arguments were checked by the * caller). * * Programmer: Raymond Lu * Thursday, 21 September 2006 * *------------------------------------------------------------------------- */ static int H5FD__direct_cmp(const H5FD_t *_f1, const H5FD_t *_f2) { const H5FD_direct_t *f1 = (const H5FD_direct_t *)_f1; const H5FD_direct_t *f2 = (const H5FD_direct_t *)_f2; int ret_value = 0; FUNC_ENTER_PACKAGE_NOERR #ifdef H5_HAVE_WIN32_API if (f1->fileindexhi < f2->fileindexhi) HGOTO_DONE(-1) if (f1->fileindexhi > f2->fileindexhi) HGOTO_DONE(1) if (f1->fileindexlo < f2->fileindexlo) HGOTO_DONE(-1) if (f1->fileindexlo > f2->fileindexlo) HGOTO_DONE(1) #else #ifdef H5_DEV_T_IS_SCALAR if (f1->device < f2->device) HGOTO_DONE(-1) if (f1->device > f2->device) HGOTO_DONE(1) #else /* H5_DEV_T_IS_SCALAR */ /* If dev_t isn't a scalar value on this system, just use memcmp to * determine if the values are the same or not. The actual return value * shouldn't really matter... */ if (HDmemcmp(&(f1->device), &(f2->device), sizeof(dev_t)) < 0) HGOTO_DONE(-1) if (HDmemcmp(&(f1->device), &(f2->device), sizeof(dev_t)) > 0) HGOTO_DONE(1) #endif /* H5_DEV_T_IS_SCALAR */ if (f1->inode < f2->inode) HGOTO_DONE(-1) if (f1->inode > f2->inode) HGOTO_DONE(1) #endif done: FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD__direct_query * * Purpose: Set the flags that this VFL driver is capable of supporting. * (listed in H5FDpublic.h) * * Return: Success: non-negative * * Failure: negative * * Programmer: Raymond Lu * Thursday, 21 September 2006 * *------------------------------------------------------------------------- */ static herr_t H5FD__direct_query(const H5FD_t H5_ATTR_UNUSED *_f, unsigned long *flags /* out */) { FUNC_ENTER_PACKAGE_NOERR /* Set the VFL feature flags that this driver supports */ if (flags) { *flags = 0; *flags |= H5FD_FEAT_AGGREGATE_METADATA; /* OK to aggregate metadata allocations */ *flags |= H5FD_FEAT_ACCUMULATE_METADATA; /* OK to accumulate metadata for faster writes */ *flags |= H5FD_FEAT_DATA_SIEVE; /* OK to perform data sieving for faster raw data reads & writes */ *flags |= H5FD_FEAT_AGGREGATE_SMALLDATA; /* OK to aggregate "small" raw data allocations */ *flags |= H5FD_FEAT_DEFAULT_VFD_COMPATIBLE; /* VFD creates a file which can be opened with the default VFD */ } FUNC_LEAVE_NOAPI(SUCCEED) } /*------------------------------------------------------------------------- * Function: H5FD__direct_get_eoa * * Purpose: Gets the end-of-address marker for the file. The EOA marker * is the first address past the last byte allocated in the * format address space. * * Return: Success: The end-of-address marker. * * Failure: HADDR_UNDEF * * Programmer: Raymond Lu * Wednesday, 20 September 2006 * *------------------------------------------------------------------------- */ static haddr_t H5FD__direct_get_eoa(const H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type) { const H5FD_direct_t *file = (const H5FD_direct_t *)_file; FUNC_ENTER_PACKAGE_NOERR FUNC_LEAVE_NOAPI(file->eoa) } /*------------------------------------------------------------------------- * Function: H5FD__direct_set_eoa * * Purpose: Set the end-of-address marker for the file. This function is * called shortly after an existing HDF5 file is opened in order * to tell the driver where the end of the HDF5 data is located. * * Return: Success: 0 * * Failure: -1 * * Programmer: Raymond Lu * Wednesday, 20 September 2006 * *------------------------------------------------------------------------- */ static herr_t H5FD__direct_set_eoa(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, haddr_t addr) { H5FD_direct_t *file = (H5FD_direct_t *)_file; FUNC_ENTER_PACKAGE_NOERR file->eoa = addr; FUNC_LEAVE_NOAPI(SUCCEED) } /*------------------------------------------------------------------------- * Function: H5FD__direct_get_eof * * Purpose: Returns the end-of-file marker, which is the greater of * either the Unix end-of-file or the HDF5 end-of-address * markers. * * Return: Success: End of file address, the first address past * the end of the "file", either the Unix file * or the HDF5 file. * * Failure: HADDR_UNDEF * * Programmer: Raymond Lu * Wednesday, 20 September 2006 * *------------------------------------------------------------------------- */ static haddr_t H5FD__direct_get_eof(const H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type) { const H5FD_direct_t *file = (const H5FD_direct_t *)_file; FUNC_ENTER_PACKAGE_NOERR FUNC_LEAVE_NOAPI(file->eof) } /*------------------------------------------------------------------------- * Function: H5FD_diect_get_handle * * Purpose: Returns the file handle of direct file driver. * * Returns: Non-negative if succeed or negative if fails. * * Programmer: Raymond Lu * 21 September 2006 * *------------------------------------------------------------------------- */ static herr_t H5FD__direct_get_handle(H5FD_t *_file, hid_t H5_ATTR_UNUSED fapl, void **file_handle) { H5FD_direct_t *file = (H5FD_direct_t *)_file; herr_t ret_value = SUCCEED; FUNC_ENTER_PACKAGE if (!file_handle) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "file handle not valid") *file_handle = &(file->fd); done: FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD__direct_read * * Purpose: Reads SIZE bytes of data from FILE beginning at address ADDR * into buffer BUF according to data transfer properties in * DXPL_ID. * * Return: Success: Zero. Result is stored in caller-supplied * buffer BUF. * * Failure: -1, Contents of buffer BUF are undefined. * * Programmer: Raymond Lu * Thursday, 21 September 2006 * *------------------------------------------------------------------------- */ static herr_t H5FD__direct_read(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t H5_ATTR_UNUSED dxpl_id, haddr_t addr, size_t size, void *buf /*out*/) { H5FD_direct_t *file = (H5FD_direct_t *)_file; ssize_t nbytes; hbool_t _must_align = TRUE; herr_t ret_value = SUCCEED; /* Return value */ size_t alloc_size; void *copy_buf = NULL, *p2; size_t _boundary; size_t _fbsize; size_t _cbsize; haddr_t read_size; /* Size to read into copy buffer */ size_t copy_size = size; /* Size remaining to read when using copy buffer */ size_t copy_offset; /* Offset into copy buffer of the requested data */ FUNC_ENTER_PACKAGE HDassert(file && file->pub.cls); HDassert(buf); /* Check for overflow conditions */ if (HADDR_UNDEF == addr) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "addr undefined") if (REGION_OVERFLOW(addr, size)) HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow") /* If the system doesn't require data to be aligned, read the data in * the same way as sec2 driver. */ _must_align = file->fa.must_align; /* Get the memory boundary for alignment, file system block size, and maximal * copy buffer size. */ _boundary = file->fa.mboundary; _fbsize = file->fa.fbsize; _cbsize = file->fa.cbsize; /* if the data is aligned or the system doesn't require data to be aligned, * read it directly from the file. If not, read a bigger * and aligned data first, then copy the data into memory buffer. */ if (!_must_align || ((addr % _fbsize == 0) && (size % _fbsize == 0) && ((size_t)buf % _boundary == 0))) { /* Seek to the correct location */ if ((addr != file->pos || OP_READ != file->op) && HDlseek(file->fd, (HDoff_t)addr, SEEK_SET) < 0) HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position") /* Read the aligned data in file first, being careful of interrupted * system calls and partial results. */ while (size > 0) { do { nbytes = HDread(file->fd, buf, size); } while (-1 == nbytes && EINTR == errno); if (-1 == nbytes) /* error */ HSYS_GOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "file read failed") if (0 == nbytes) { /* end of file but not end of format address space */ HDmemset(buf, 0, size); break; } HDassert(nbytes >= 0); HDassert((size_t)nbytes <= size); H5_CHECK_OVERFLOW(nbytes, ssize_t, size_t); size -= (size_t)nbytes; H5_CHECK_OVERFLOW(nbytes, ssize_t, haddr_t); addr += (haddr_t)nbytes; buf = (char *)buf + nbytes; } } else { /* Calculate where we will begin copying from the copy buffer */ copy_offset = (size_t)(addr % _fbsize); /* allocate memory needed for the Direct IO option up to the maximal * copy buffer size. Make a bigger buffer for aligned I/O if size is * smaller than maximal copy buffer. */ alloc_size = ((copy_offset + size - 1) / _fbsize + 1) * _fbsize; if (alloc_size > _cbsize) alloc_size = _cbsize; HDassert(!(alloc_size % _fbsize)); if (HDposix_memalign(©_buf, _boundary, alloc_size) != 0) HGOTO_ERROR(H5E_RESOURCE, H5E_CANTALLOC, FAIL, "HDposix_memalign failed") /* look for the aligned position for reading the data */ HDassert(!(((addr / _fbsize) * _fbsize) % _fbsize)); if (HDlseek(file->fd, (HDoff_t)((addr / _fbsize) * _fbsize), SEEK_SET) < 0) HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position") /* * Read the aligned data in file into aligned buffer first, then copy the data * into the final buffer. If the data size is bigger than maximal copy buffer * size, do the reading by segment (the outer while loop). If not, do one step * reading. */ do { /* Read the aligned data in file first. Not able to handle interrupted * system calls and partial results like sec2 driver does because the * data may no longer be aligned. It's especially true when the data in * file is smaller than ALLOC_SIZE. */ HDmemset(copy_buf, 0, alloc_size); /* Calculate how much data we have to read in this iteration * (including unused parts of blocks) */ if ((copy_size + copy_offset) < alloc_size) read_size = ((copy_size + copy_offset - 1) / _fbsize + 1) * _fbsize; else read_size = alloc_size; HDassert(!(read_size % _fbsize)); do { nbytes = HDread(file->fd, copy_buf, read_size); } while (-1 == nbytes && EINTR == errno); if (-1 == nbytes) /* error */ HSYS_GOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "file read failed") /* Copy the needed data from the copy buffer to the output * buffer, and update copy_size. If the copy buffer does not * contain the rest of the data, just copy what's in the copy * buffer and also update read_addr and copy_offset to read the * next section of data. */ p2 = (unsigned char *)copy_buf + copy_offset; if ((copy_size + copy_offset) <= alloc_size) { H5MM_memcpy(buf, p2, copy_size); buf = (unsigned char *)buf + copy_size; copy_size = 0; } /* end if */ else { H5MM_memcpy(buf, p2, alloc_size - copy_offset); buf = (unsigned char *)buf + alloc_size - copy_offset; copy_size -= alloc_size - copy_offset; copy_offset = 0; } /* end else */ } while (copy_size > 0); /*Final step: update address*/ addr = (haddr_t)(((addr + size - 1) / _fbsize + 1) * _fbsize); if (copy_buf) { /* Free with HDfree since it came from posix_memalign */ HDfree(copy_buf); copy_buf = NULL; } /* end if */ } /* Update current position */ file->pos = addr; file->op = OP_READ; done: if (ret_value < 0) { /* Free with HDfree since it came from posix_memalign */ if (copy_buf) HDfree(copy_buf); /* Reset last file I/O information */ file->pos = HADDR_UNDEF; file->op = OP_UNKNOWN; } /* end if */ FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD__direct_write * * Purpose: Writes SIZE bytes of data to FILE beginning at address ADDR * from buffer BUF according to data transfer properties in * DXPL_ID. * * Return: Success: Zero * * Failure: -1 * * Programmer: Raymond Lu * Thursday, 21 September 2006 * *------------------------------------------------------------------------- */ static herr_t H5FD__direct_write(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t H5_ATTR_UNUSED dxpl_id, haddr_t addr, size_t size, const void *buf) { H5FD_direct_t *file = (H5FD_direct_t *)_file; ssize_t nbytes; hbool_t _must_align = TRUE; herr_t ret_value = SUCCEED; /* Return value */ size_t alloc_size; void *copy_buf = NULL, *p1; const void *p3; size_t _boundary; size_t _fbsize; size_t _cbsize; haddr_t write_addr; /* Address to write copy buffer */ haddr_t write_size; /* Size to write from copy buffer */ haddr_t read_size; /* Size to read into copy buffer */ size_t copy_size = size; /* Size remaining to write when using copy buffer */ size_t copy_offset; /* Offset into copy buffer of the data to write */ FUNC_ENTER_PACKAGE HDassert(file && file->pub.cls); HDassert(buf); /* Check for overflow conditions */ if (HADDR_UNDEF == addr) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "addr undefined") if (REGION_OVERFLOW(addr, size)) HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow") /* If the system doesn't require data to be aligned, read the data in * the same way as sec2 driver. */ _must_align = file->fa.must_align; /* Get the memory boundary for alignment, file system block size, and maximal * copy buffer size. */ _boundary = file->fa.mboundary; _fbsize = file->fa.fbsize; _cbsize = file->fa.cbsize; /* if the data is aligned or the system doesn't require data to be aligned, * write it directly to the file. If not, read a bigger and aligned data * first, update buffer with user data, then write the data out. */ if (!_must_align || ((addr % _fbsize == 0) && (size % _fbsize == 0) && ((size_t)buf % _boundary == 0))) { /* Seek to the correct location */ if ((addr != file->pos || OP_WRITE != file->op) && HDlseek(file->fd, (HDoff_t)addr, SEEK_SET) < 0) HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position") while (size > 0) { do { nbytes = HDwrite(file->fd, buf, size); } while (-1 == nbytes && EINTR == errno); if (-1 == nbytes) /* error */ HSYS_GOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "file write failed") HDassert(nbytes > 0); HDassert((size_t)nbytes <= size); H5_CHECK_OVERFLOW(nbytes, ssize_t, size_t); size -= (size_t)nbytes; H5_CHECK_OVERFLOW(nbytes, ssize_t, haddr_t); addr += (haddr_t)nbytes; buf = (const char *)buf + nbytes; } } else { /* Calculate where we will begin reading from (on disk) and where we * will begin copying from the copy buffer */ write_addr = (addr / _fbsize) * _fbsize; copy_offset = (size_t)(addr % _fbsize); /* allocate memory needed for the Direct IO option up to the maximal * copy buffer size. Make a bigger buffer for aligned I/O if size is * smaller than maximal copy buffer. */ alloc_size = ((copy_offset + size - 1) / _fbsize + 1) * _fbsize; if (alloc_size > _cbsize) alloc_size = _cbsize; HDassert(!(alloc_size % _fbsize)); if (HDposix_memalign(©_buf, _boundary, alloc_size) != 0) HGOTO_ERROR(H5E_RESOURCE, H5E_CANTALLOC, FAIL, "HDposix_memalign failed") /* look for the right position for reading or writing the data */ if (HDlseek(file->fd, (HDoff_t)write_addr, SEEK_SET) < 0) HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position") p3 = buf; do { /* Calculate how much data we have to write in this iteration * (including unused parts of blocks) */ if ((copy_size + copy_offset) < alloc_size) write_size = ((copy_size + copy_offset - 1) / _fbsize + 1) * _fbsize; else write_size = alloc_size; /* * Read the aligned data first if the aligned region doesn't fall * entirely in the range to be written. Not able to handle interrupted * system calls and partial results like sec2 driver does because the * data may no longer be aligned. It's especially true when the data in * file is smaller than ALLOC_SIZE. Only read the entire section if * both ends are misaligned, otherwise only read the block on the * misaligned end. */ HDmemset(copy_buf, 0, _fbsize); if (copy_offset > 0) { if ((write_addr + write_size) > (addr + size)) { HDassert((write_addr + write_size) - (addr + size) < _fbsize); read_size = write_size; p1 = copy_buf; } /* end if */ else { read_size = _fbsize; p1 = copy_buf; } /* end else */ } /* end if */ else if ((write_addr + write_size) > (addr + size)) { HDassert((write_addr + write_size) - (addr + size) < _fbsize); read_size = _fbsize; p1 = (unsigned char *)copy_buf + write_size - _fbsize; /* Seek to the last block, for reading */ HDassert(!((write_addr + write_size - _fbsize) % _fbsize)); if (HDlseek(file->fd, (HDoff_t)(write_addr + write_size - _fbsize), SEEK_SET) < 0) HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position") } /* end if */ else p1 = NULL; if (p1) { HDassert(!(read_size % _fbsize)); do { nbytes = HDread(file->fd, p1, read_size); } while (-1 == nbytes && EINTR == errno); if (-1 == nbytes) /* error */ HSYS_GOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "file read failed") } /* end if */ /* look for the right position and append or copy the data to be written to * the aligned buffer. * Consider all possible situations here: file address is not aligned on * file block size; the end of data address is not aligned; the end of data * address is aligned; data size is smaller or bigger than maximal copy size. */ p1 = (unsigned char *)copy_buf + copy_offset; if ((copy_size + copy_offset) <= alloc_size) { H5MM_memcpy(p1, p3, copy_size); copy_size = 0; } /* end if */ else { H5MM_memcpy(p1, p3, alloc_size - copy_offset); p3 = (const unsigned char *)p3 + (alloc_size - copy_offset); copy_size -= alloc_size - copy_offset; copy_offset = 0; } /* end else */ /*look for the aligned position for writing the data*/ HDassert(!(write_addr % _fbsize)); if (HDlseek(file->fd, (HDoff_t)write_addr, SEEK_SET) < 0) HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position") /* * Write the data. It doesn't truncate the extra data introduced by * alignment because that step is done in H5FD_direct_flush. */ HDassert(!(write_size % _fbsize)); do { nbytes = HDwrite(file->fd, copy_buf, write_size); } while (-1 == nbytes && EINTR == errno); if (-1 == nbytes) /* error */ HSYS_GOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "file write failed") /* update the write address */ write_addr += write_size; } while (copy_size > 0); /*Update the address and size*/ addr = write_addr; buf = (const char *)buf + size; if (copy_buf) { /* Free with HDfree since it came from posix_memalign */ HDfree(copy_buf); copy_buf = NULL; } /* end if */ } /* Update current position and eof */ file->pos = addr; file->op = OP_WRITE; if (file->pos > file->eof) file->eof = file->pos; done: if (ret_value < 0) { /* Free with HDfree since it came from posix_memalign */ if (copy_buf) HDfree(copy_buf); /* Reset last file I/O information */ file->pos = HADDR_UNDEF; file->op = OP_UNKNOWN; } /* end if */ FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD__direct_truncate * * Purpose: Makes sure that the true file size is the same (or larger) * than the end-of-address. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Raymond Lu * Thursday, 21 September 2006 * *------------------------------------------------------------------------- */ static herr_t H5FD__direct_truncate(H5FD_t *_file, hid_t H5_ATTR_UNUSED dxpl_id, hbool_t H5_ATTR_UNUSED closing) { H5FD_direct_t *file = (H5FD_direct_t *)_file; herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_PACKAGE HDassert(file); /* Extend the file to make sure it's large enough */ if (file->eoa != file->eof) { #ifdef H5_HAVE_WIN32_API HFILE filehandle; /* Windows file handle */ LARGE_INTEGER li; /* 64-bit integer for SetFilePointer() call */ /* Map the posix file handle to a Windows file handle */ filehandle = _get_osfhandle(file->fd); /* Translate 64-bit integers into form Windows wants */ /* [This algorithm is from the Windows documentation for SetFilePointer()] */ li.QuadPart = (LONGLONG)file->eoa; (void)SetFilePointer((HANDLE)filehandle, li.LowPart, &li.HighPart, FILE_BEGIN); if (SetEndOfFile((HANDLE)filehandle) == 0) HGOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to extend file properly") #else /* H5_HAVE_WIN32_API */ if (-1 == HDftruncate(file->fd, (HDoff_t)file->eoa)) HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to extend file properly") #endif /* H5_HAVE_WIN32_API */ /* Update the eof value */ file->eof = file->eoa; /* Reset last file I/O information */ file->pos = HADDR_UNDEF; file->op = OP_UNKNOWN; } else if (file->fa.must_align) { /*Even though eof is equal to eoa, file is still truncated because Direct I/O *write introduces some extra data for alignment. */ if (-1 == HDftruncate(file->fd, (HDoff_t)file->eof)) HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to extend file properly") } done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD__direct_truncate() */ /*------------------------------------------------------------------------- * Function: H5FD__direct_lock * * Purpose: To place an advisory lock on a file. * The lock type to apply depends on the parameter "rw": * TRUE--opens for write: an exclusive lock * FALSE--opens for read: a shared lock * * Return: SUCCEED/FAIL * * Programmer: Vailin Choi; May 2013 * *------------------------------------------------------------------------- */ static herr_t H5FD__direct_lock(H5FD_t *_file, hbool_t rw) { H5FD_direct_t *file = (H5FD_direct_t *)_file; /* VFD file struct */ int lock_flags; /* file locking flags */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_PACKAGE HDassert(file); /* Set exclusive or shared lock based on rw status */ lock_flags = rw ? LOCK_EX : LOCK_SH; /* Place a non-blocking lock on the file */ if (HDflock(file->fd, lock_flags | LOCK_NB) < 0) { if (file->ignore_disabled_file_locks && ENOSYS == errno) { /* When errno is set to ENOSYS, the file system does not support * locking, so ignore it. */ errno = 0; } else HSYS_GOTO_ERROR(H5E_VFL, H5E_CANTLOCKFILE, FAIL, "unable to lock file") } done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD__direct_lock() */ /*------------------------------------------------------------------------- * Function: H5FD__direct_unlock * * Purpose: To remove the existing lock on the file * * Return: SUCCEED/FAIL * * Programmer: Vailin Choi; May 2013 * *------------------------------------------------------------------------- */ static herr_t H5FD__direct_unlock(H5FD_t *_file) { H5FD_direct_t *file = (H5FD_direct_t *)_file; /* VFD file struct */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_PACKAGE HDassert(file); if (HDflock(file->fd, LOCK_UN) < 0) { if (file->ignore_disabled_file_locks && ENOSYS == errno) { /* When errno is set to ENOSYS, the file system does not support * locking, so ignore it. */ errno = 0; } else HSYS_GOTO_ERROR(H5E_VFL, H5E_CANTUNLOCKFILE, FAIL, "unable to unlock file") } done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD__direct_unlock() */ /*------------------------------------------------------------------------- * Function: H5FD__direct_delete * * Purpose: Delete a file * * Return: SUCCEED/FAIL * *------------------------------------------------------------------------- */ static herr_t H5FD__direct_delete(const char *filename, hid_t H5_ATTR_UNUSED fapl_id) { herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_PACKAGE HDassert(filename); if (HDremove(filename) < 0) HSYS_GOTO_ERROR(H5E_VFL, H5E_CANTDELETEFILE, FAIL, "unable to delete file") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD__direct_delete() */ #endif /* H5_HAVE_DIRECT */