/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Programmer: Robb Matzke * Thursday, July 29, 1999 * * Purpose: This is the MPI-2 I/O driver. * */ /* Interface initialization */ #define H5_INTERFACE_INIT_FUNC H5FD_mpio_init_interface #include "H5private.h" /* Generic Functions */ #include "H5Dprivate.h" /* Dataset functions */ #include "H5Eprivate.h" /* Error handling */ #include "H5Fprivate.h" /* File access */ #include "H5FDprivate.h" /* File drivers */ #include "H5FDmpi.h" /* MPI-based file drivers */ #include "H5Iprivate.h" /* IDs */ #include "H5MMprivate.h" /* Memory management */ #include "H5Pprivate.h" /* Property lists */ #ifdef H5_HAVE_PARALLEL /* * The driver identification number, initialized at runtime if H5_HAVE_PARALLEL * is defined. This allows applications to still have the H5FD_MPIO * "constants" in their source code. */ static hid_t H5FD_MPIO_g = 0; /* * The description of a file belonging to this driver. * The EOF value is only used just after the file is opened in order for the * library to determine whether the file is empty, truncated, or okay. The MPIO * driver doesn't bother to keep it updated since it's an expensive operation. */ typedef struct H5FD_mpio_t { H5FD_t pub; /*public stuff, must be first */ MPI_File f; /*MPIO file handle */ MPI_Comm comm; /*communicator */ MPI_Info info; /*file information */ int mpi_rank; /* This process's rank */ int mpi_size; /* Total number of processes */ haddr_t eof; /*end-of-file marker */ haddr_t eoa; /*end-of-address marker */ haddr_t last_eoa; /* Last known end-of-address marker */ } H5FD_mpio_t; /* Private Prototypes */ /* Callbacks */ static void *H5FD_mpio_fapl_get(H5FD_t *_file); static void *H5FD_mpio_fapl_copy(const void *_old_fa); static herr_t H5FD_mpio_fapl_free(void *_fa); static H5FD_t *H5FD_mpio_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr); static herr_t H5FD_mpio_close(H5FD_t *_file); static herr_t H5FD_mpio_query(const H5FD_t *_f1, unsigned long *flags); static haddr_t H5FD_mpio_get_eoa(const H5FD_t *_file, H5FD_mem_t type); static herr_t H5FD_mpio_set_eoa(H5FD_t *_file, H5FD_mem_t type, haddr_t addr); static haddr_t H5FD_mpio_get_eof(const H5FD_t *_file); static herr_t H5FD_mpio_get_handle(H5FD_t *_file, hid_t fapl, void** file_handle); static herr_t H5FD_mpio_read(H5FD_t *_file, H5FD_mem_t type, hid_t dxpl_id, haddr_t addr, size_t size, void *buf); static herr_t H5FD_mpio_write(H5FD_t *_file, H5FD_mem_t type, hid_t dxpl_id, haddr_t addr, size_t size, const void *buf); static herr_t H5FD_mpio_flush(H5FD_t *_file, hid_t dxpl_id, unsigned closing); static herr_t H5FD_mpio_truncate(H5FD_t *_file, hid_t dxpl_id, hbool_t closing); static int H5FD_mpio_mpi_rank(const H5FD_t *_file); static int H5FD_mpio_mpi_size(const H5FD_t *_file); static MPI_Comm H5FD_mpio_communicator(const H5FD_t *_file); /* MPIO-specific file access properties */ typedef struct H5FD_mpio_fapl_t { MPI_Comm comm; /*communicator */ MPI_Info info; /*file information */ } H5FD_mpio_fapl_t; /* The MPIO file driver information */ static const H5FD_class_mpi_t H5FD_mpio_g = { { /* Start of superclass information */ "mpio", /*name */ HADDR_MAX, /*maxaddr */ H5F_CLOSE_SEMI, /* fc_degree */ NULL, /*sb_size */ NULL, /*sb_encode */ NULL, /*sb_decode */ sizeof(H5FD_mpio_fapl_t), /*fapl_size */ H5FD_mpio_fapl_get, /*fapl_get */ H5FD_mpio_fapl_copy, /*fapl_copy */ H5FD_mpio_fapl_free, /*fapl_free */ 0, /*dxpl_size */ NULL, /*dxpl_copy */ NULL, /*dxpl_free */ H5FD_mpio_open, /*open */ H5FD_mpio_close, /*close */ NULL, /*cmp */ H5FD_mpio_query, /*query */ NULL, /*get_type_map */ NULL, /*alloc */ NULL, /*free */ H5FD_mpio_get_eoa, /*get_eoa */ H5FD_mpio_set_eoa, /*set_eoa */ H5FD_mpio_get_eof, /*get_eof */ H5FD_mpio_get_handle, /*get_handle */ H5FD_mpio_read, /*read */ H5FD_mpio_write, /*write */ H5FD_mpio_flush, /*flush */ H5FD_mpio_truncate, /*truncate */ NULL, /*lock */ NULL, /*unlock */ H5FD_FLMAP_DICHOTOMY /*fl_map */ }, /* End of superclass information */ H5FD_mpio_mpi_rank, /*get_rank */ H5FD_mpio_mpi_size, /*get_size */ H5FD_mpio_communicator /*get_comm */ }; #ifdef H5FDmpio_DEBUG /* Flags to control debug actions in H5Fmpio. * Meant to be indexed by characters. * * 'c' show result of MPI_Get_count after read * 'r' show read offset and size * 't' trace function entry and exit * 'w' show write offset and size */ static int H5FD_mpio_Debug[256] = { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }; #endif /*-------------------------------------------------------------------------- NAME H5FD_mpio_init_interface -- Initialize interface-specific information USAGE herr_t H5FD_mpio_init_interface() RETURNS Non-negative on success/Negative on failure DESCRIPTION Initializes any interface-specific data or routines. (Just calls H5FD_mpio_init currently). --------------------------------------------------------------------------*/ static herr_t H5FD_mpio_init_interface(void) { FUNC_ENTER_NOAPI_NOINIT_NOERR FUNC_LEAVE_NOAPI(H5FD_mpio_init()) } /* H5FD_mpio_init_interface() */ /*------------------------------------------------------------------------- * Function: H5FD_mpio_init * * Purpose: Initialize this driver by registering the driver with the * library. * * Return: Success: The driver ID for the mpio driver. * * Failure: Negative. * * Programmer: Robb Matzke * Thursday, August 5, 1999 * * Modifications: * *------------------------------------------------------------------------- */ hid_t H5FD_mpio_init(void) { #ifdef H5FDmpio_DEBUG static int H5FD_mpio_Debug_inited=0; #endif /* H5FDmpio_DEBUG */ hid_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(FAIL) if (H5I_VFL!=H5I_get_type(H5FD_MPIO_g)) H5FD_MPIO_g = H5FD_register((const H5FD_class_t *)&H5FD_mpio_g,sizeof(H5FD_class_mpi_t),FALSE); #ifdef H5FDmpio_DEBUG if (!H5FD_mpio_Debug_inited) { /* set debug mask */ /* Should this be done in H5F global initialization instead of here? */ const char *s = HDgetenv ("H5FD_mpio_Debug"); if (s) { while (*s){ H5FD_mpio_Debug[(int)*s]++; s++; } } H5FD_mpio_Debug_inited++; } #endif /* H5FDmpio_DEBUG */ /* Set return value */ ret_value=H5FD_MPIO_g; done: FUNC_LEAVE_NOAPI(ret_value) } /*--------------------------------------------------------------------------- * Function: H5FD_mpio_term * * Purpose: Shut down the VFD * * Return: * * Programmer: Quincey Koziol * Friday, Jan 30, 2004 * * Modification: * *--------------------------------------------------------------------------- */ void H5FD_mpio_term(void) { FUNC_ENTER_NOAPI_NOINIT_NOERR /* Reset VFL ID */ H5FD_MPIO_g=0; FUNC_LEAVE_NOAPI_VOID } /* end H5FD_mpio_term() */ /*------------------------------------------------------------------------- * Function: H5Pset_fapl_mpio * * Purpose: Store the user supplied MPIO communicator comm and info in * the file access property list FAPL_ID which can then be used * to create and/or open the file. This function is available * only in the parallel HDF5 library and is not collective. * * comm is the MPI communicator to be used for file open as * defined in MPI_FILE_OPEN of MPI-2. This function makes a * duplicate of comm. Any modification to comm after this function * call returns has no effect on the access property list. * * info is the MPI Info object to be used for file open as * defined in MPI_FILE_OPEN of MPI-2. This function makes a * duplicate of info. Any modification to info after this * function call returns has no effect on the access property * list. * * If fapl_id has previously set comm and info values, they * will be replaced and the old communicator and Info object * are freed. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Albert Cheng * Feb 3, 1998 * * Modifications: * Robb Matzke, 1998-02-18 * Check all arguments before the property list is updated so we * don't leave the property list in a bad state if something * goes wrong. Also, the property list data type changed to * allow more generality so all the mpi-related stuff is in the * `u.mpi' member. The `access_mode' will contain only * mpi-related flags defined in H5Fpublic.h. * * Albert Cheng, 1998-04-16 * Removed the ACCESS_MODE argument. The access mode is changed * to be controlled by data transfer property list during data * read/write calls. * * Robb Matzke, 1999-08-06 * Modified to work with the virtual file layer. * * Raymond Lu, 2001-10-23 * Changed the file access list to the new generic property * list. * * Albert Cheng, 2003-04-17 * Modified the description of the function that it now stores * a duplicate of the communicator and INFO object. Free the * old duplicates if previously set. (Work is actually done * by H5P_set_driver.) * *------------------------------------------------------------------------- */ herr_t H5Pset_fapl_mpio(hid_t fapl_id, MPI_Comm comm, MPI_Info info) { H5FD_mpio_fapl_t fa; H5P_genplist_t *plist; /* Property list pointer */ herr_t ret_value; FUNC_ENTER_API(FAIL) H5TRACE3("e", "iMcMi", fapl_id, comm, info); if(fapl_id == H5P_DEFAULT) HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "can't set values in default property list") /* Check arguments */ if(NULL == (plist = H5P_object_verify(fapl_id, H5P_FILE_ACCESS))) HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a file access list") if(MPI_COMM_NULL == comm) HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a valid communicator") /* Initialize driver specific properties */ fa.comm = comm; fa.info = info; /* duplication is done during driver setting. */ ret_value= H5P_set_driver(plist, H5FD_MPIO, &fa); done: FUNC_LEAVE_API(ret_value) } /*------------------------------------------------------------------------- * Function: H5Pget_fapl_mpio * * Purpose: If the file access property list is set to the H5FD_MPIO * driver then this function returns duplicates of the MPI * communicator and Info object stored through the comm and * info pointers. It is the responsibility of the application * to free the returned communicator and Info object. * * Return: Success: Non-negative with the communicator and * Info object returned through the comm and * info arguments if non-null. Since they are * duplicates of the stored objects, future * modifications to the access property list do * not affect them and it is the responsibility * of the application to free them. * * Failure: Negative * * Programmer: Robb Matzke * Thursday, February 26, 1998 * * Modifications: * * Albert Cheng, Apr 16, 1998 * Removed the access_mode argument. The access_mode is changed * to be controlled by data transfer property list during data * read/write calls. * * Raymond Lu, 2001-10-23 * Changed the file access list to the new generic property * list. * * Albert Cheng, 2003-04-17 * Return duplicates of the stored communicator and Info object. * *------------------------------------------------------------------------- */ herr_t H5Pget_fapl_mpio(hid_t fapl_id, MPI_Comm *comm/*out*/, MPI_Info *info/*out*/) { H5FD_mpio_fapl_t *fa; H5P_genplist_t *plist; /* Property list pointer */ MPI_Comm comm_tmp=MPI_COMM_NULL; int mpi_code; /* mpi return code */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_API(FAIL) H5TRACE3("e", "ixx", fapl_id, comm, info); if(NULL == (plist = H5P_object_verify(fapl_id, H5P_FILE_ACCESS))) HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a file access list") if(H5FD_MPIO != H5P_get_driver(plist)) HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "incorrect VFL driver") if(NULL == (fa = (H5FD_mpio_fapl_t *)H5P_get_driver_info(plist))) HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "bad VFL driver info") /* Store the duplicated communicator in a temporary variable for error */ /* recovery in case the INFO duplication fails. We cannot attempt to */ /* the value into *comm yet since if MPI_Comm_dup fails, we will end */ /* up freeing whatever *comm holds and that could be invalid. */ if (comm){ if (MPI_SUCCESS != (mpi_code=MPI_Comm_dup(fa->comm, &comm_tmp))) HMPI_GOTO_ERROR(FAIL, "MPI_Comm_dup failed", mpi_code) } if (info){ if (MPI_INFO_NULL != fa->info){ if (MPI_SUCCESS != (mpi_code=MPI_Info_dup(fa->info, info))) HMPI_GOTO_ERROR(FAIL, "MPI_Info_dup failed", mpi_code) }else{ /* do not dup it */ *info = MPI_INFO_NULL; } } if (comm) *comm = comm_tmp; done: if (FAIL==ret_value){ /* need to free anything created here */ if (comm_tmp != MPI_COMM_NULL) MPI_Comm_free(&comm_tmp); } FUNC_LEAVE_API(ret_value) } /*------------------------------------------------------------------------- * Function: H5Pset_dxpl_mpio * * Purpose: Set the data transfer property list DXPL_ID to use transfer * mode XFER_MODE. The property list can then be used to control * the I/O transfer mode during data I/O operations. The valid * transfer modes are: * * H5FD_MPIO_INDEPENDENT: * Use independent I/O access (the default). * * H5FD_MPIO_COLLECTIVE: * Use collective I/O access. * * Return: Success: Non-negative * Failure: Negative * * Programmer: Albert Cheng * April 2, 1998 * *------------------------------------------------------------------------- */ herr_t H5Pset_dxpl_mpio(hid_t dxpl_id, H5FD_mpio_xfer_t xfer_mode) { H5P_genplist_t *plist; /* Property list pointer */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_API(FAIL) H5TRACE2("e", "iDt", dxpl_id, xfer_mode); if(dxpl_id == H5P_DEFAULT) HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "can't set values in default property list") /* Check arguments */ if(NULL == (plist = H5P_object_verify(dxpl_id, H5P_DATASET_XFER))) HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a dxpl") if(H5FD_MPIO_INDEPENDENT != xfer_mode && H5FD_MPIO_COLLECTIVE != xfer_mode) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "incorrect xfer_mode") /* Set the transfer mode */ if(H5P_set(plist, H5D_XFER_IO_XFER_MODE_NAME, &xfer_mode) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "unable to set value") done: FUNC_LEAVE_API(ret_value) } /* end H5Pset_dxpl_mpio() */ /*------------------------------------------------------------------------- * Function: H5Pget_dxpl_mpio * * Purpose: Queries the transfer mode current set in the data transfer * property list DXPL_ID. This is not collective. * * Return: Success: Non-negative, with the transfer mode returned * through the XFER_MODE argument if it is * non-null. * * Failure: Negative * * Programmer: Albert Cheng * April 2, 1998 * *------------------------------------------------------------------------- */ herr_t H5Pget_dxpl_mpio(hid_t dxpl_id, H5FD_mpio_xfer_t *xfer_mode/*out*/) { H5P_genplist_t *plist; /* Property list pointer */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_API(FAIL) H5TRACE2("e", "ix", dxpl_id, xfer_mode); if(NULL == (plist = H5P_object_verify(dxpl_id, H5P_DATASET_XFER))) HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a dxpl") /* Get the transfer mode */ if(xfer_mode) if(H5P_get(plist, H5D_XFER_IO_XFER_MODE_NAME, xfer_mode) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "unable to get value") done: FUNC_LEAVE_API(ret_value) } /* end H5Pget_dxpl_mpio() */ /*------------------------------------------------------------------------- * Function: H5Pset_dxpl_mpio_collective_opt * * Purpose: To set a flag to choose linked chunk I/O or multi-chunk I/O * without involving decision-making inside HDF5 * * Note: The library will do linked chunk I/O or multi-chunk I/O without * involving communications for decision-making process. * The library won't behave as it asks for only when we find * that the low-level MPI-IO package doesn't support this. * * Return: Success: Non-negative * Failure: Negative * * Programmer: Kent Yang * ? ?, ? * *------------------------------------------------------------------------- */ herr_t H5Pset_dxpl_mpio_collective_opt(hid_t dxpl_id, H5FD_mpio_collective_opt_t opt_mode) { H5P_genplist_t *plist; /* Property list pointer */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_API(FAIL) H5TRACE2("e", "iDc", dxpl_id, opt_mode); if(dxpl_id == H5P_DEFAULT) HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "can't set values in default property list") /* Check arguments */ if(NULL == (plist = H5P_object_verify(dxpl_id, H5P_DATASET_XFER))) HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a dxpl") /* Set the transfer mode */ if(H5P_set(plist, H5D_XFER_MPIO_COLLECTIVE_OPT_NAME, &opt_mode) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "unable to set value") done: FUNC_LEAVE_API(ret_value) } /* end H5Pset_dxpl_mpio_collective_opt() */ /*------------------------------------------------------------------------- * Function: H5Pset_dxpl_mpio_chunk_opt * * Purpose: To set a flag to choose linked chunk I/O or multi-chunk I/O * without involving decision-making inside HDF5 * * Note: The library will do linked chunk I/O or multi-chunk I/O without * involving communications for decision-making process. * The library won't behave as it asks for only when we find * that the low-level MPI-IO package doesn't support this. * * Return: Success: Non-negative * Failure: Negative * * Programmer: Kent Yang * ? ?, ? * *------------------------------------------------------------------------- */ herr_t H5Pset_dxpl_mpio_chunk_opt(hid_t dxpl_id, H5FD_mpio_chunk_opt_t opt_mode) { H5P_genplist_t *plist; /* Property list pointer */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_API(FAIL) H5TRACE2("e", "iDh", dxpl_id, opt_mode); if(dxpl_id == H5P_DEFAULT) HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "can't set values in default property list") /* Check arguments */ if(NULL == (plist = H5P_object_verify(dxpl_id, H5P_DATASET_XFER))) HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a dxpl") /* Set the transfer mode */ if(H5P_set(plist, H5D_XFER_MPIO_CHUNK_OPT_HARD_NAME, &opt_mode) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "unable to set value") done: FUNC_LEAVE_API(ret_value) } /* end H5Pset_dxpl_mpio_chunk_opt() */ /*------------------------------------------------------------------------- * Function: H5Pset_dxpl_mpio_chunk_opt_num * * Purpose: To set a threshold for doing linked chunk IO * * Note: If the number is greater than the threshold set by the user, * the library will do linked chunk I/O; otherwise, I/O will be * done for every chunk. * * Return: Success: Non-negative * Failure: Negative * * Programmer: Kent Yang * ? ?, ? * *------------------------------------------------------------------------- */ herr_t H5Pset_dxpl_mpio_chunk_opt_num(hid_t dxpl_id, unsigned num_chunk_per_proc) { H5P_genplist_t *plist; /* Property list pointer */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_API(FAIL) H5TRACE2("e", "iIu", dxpl_id, num_chunk_per_proc); if(dxpl_id == H5P_DEFAULT) HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "can't set values in default property list") /* Check arguments */ if(NULL == (plist = H5P_object_verify(dxpl_id, H5P_DATASET_XFER))) HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a dxpl") /* Set the transfer mode */ if(H5P_set(plist, H5D_XFER_MPIO_CHUNK_OPT_NUM_NAME, &num_chunk_per_proc) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "unable to set value") done: FUNC_LEAVE_API(ret_value) } /* end H5Pset_dxpl_mpio_chunk_opt_num() */ /*------------------------------------------------------------------------- * Function: H5Pset_dxpl_mpio_chunk_opt_ratio * * Purpose: To set a threshold for doing collective I/O for each chunk * * Note: The library will calculate the percentage of the number of * process holding selections at each chunk. If that percentage * of number of process in the individual chunk is greater than * the threshold set by the user, the library will do collective * chunk I/O for this chunk; otherwise, independent I/O will be * done for this chunk. * * Return: Success: Non-negative * Failure: Negative * * Programmer: Kent Yang * ? ?, ? * *------------------------------------------------------------------------- */ herr_t H5Pset_dxpl_mpio_chunk_opt_ratio(hid_t dxpl_id, unsigned percent_num_proc_per_chunk) { H5P_genplist_t *plist; /* Property list pointer */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_API(FAIL) H5TRACE2("e", "iIu", dxpl_id, percent_num_proc_per_chunk); if(dxpl_id == H5P_DEFAULT) HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "can't set values in default property list") /* Check arguments */ if(NULL == (plist = H5P_object_verify(dxpl_id, H5P_DATASET_XFER))) HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a dxpl") /* Set the transfer mode */ if(H5P_set(plist, H5D_XFER_MPIO_CHUNK_OPT_RATIO_NAME, &percent_num_proc_per_chunk) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "unable to set value") done: FUNC_LEAVE_API(ret_value) } /* end H5Pset_dxpl_mpio_chunk_opt_ratio() */ /*------------------------------------------------------------------------- * Function: H5FD_mpio_fapl_get * * Purpose: Returns a file access property list which could be used to * create another file the same as this one. * * Return: Success: Ptr to new file access property list with all * fields copied from the file pointer. * * Failure: NULL * * Programmer: Robb Matzke * Friday, August 13, 1999 * *------------------------------------------------------------------------- */ static void * H5FD_mpio_fapl_get(H5FD_t *_file) { H5FD_mpio_t *file = (H5FD_mpio_t*)_file; H5FD_mpio_fapl_t *fa = NULL; void *ret_value; /* Return value */ FUNC_ENTER_NOAPI_NOINIT HDassert(file); HDassert(H5FD_MPIO == file->pub.driver_id); if(NULL == (fa = (H5FD_mpio_fapl_t *)H5MM_calloc(sizeof(H5FD_mpio_fapl_t)))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "memory allocation failed") /* Duplicate communicator and Info object. */ if(FAIL == H5FD_mpi_comm_info_dup(file->comm, file->info, &fa->comm, &fa->info)) HGOTO_ERROR(H5E_INTERNAL, H5E_CANTCOPY, NULL, "Communicator/Info duplicate failed") /* Set return value */ ret_value = fa; done: FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD_mpio_fapl_copy * * Purpose: Copies the mpio-specific file access properties. * * Return: Success: Ptr to a new property list * * Failure: NULL * * Programmer: Albert Cheng * Jan 8, 2003 * *------------------------------------------------------------------------- */ static void * H5FD_mpio_fapl_copy(const void *_old_fa) { void *ret_value = NULL; const H5FD_mpio_fapl_t *old_fa = (const H5FD_mpio_fapl_t*)_old_fa; H5FD_mpio_fapl_t *new_fa = NULL; FUNC_ENTER_NOAPI_NOINIT #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) fprintf(stderr, "enter H5FD_mpio_fapl_copy\n"); #endif if(NULL == (new_fa = (H5FD_mpio_fapl_t *)H5MM_malloc(sizeof(H5FD_mpio_fapl_t)))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "memory allocation failed") /* Copy the general information */ HDmemcpy(new_fa, old_fa, sizeof(H5FD_mpio_fapl_t)); /* Duplicate communicator and Info object. */ if(FAIL == H5FD_mpi_comm_info_dup(old_fa->comm, old_fa->info, &new_fa->comm, &new_fa->info)) HGOTO_ERROR(H5E_INTERNAL, H5E_CANTCOPY, NULL, "Communicator/Info duplicate failed") ret_value = new_fa; done: if (NULL == ret_value){ /* cleanup */ if (new_fa) H5MM_xfree(new_fa); } #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) fprintf(stderr, "leaving H5FD_mpio_fapl_copy\n"); #endif FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpio_fapl_copy() */ /*------------------------------------------------------------------------- * Function: H5FD_mpio_fapl_free * * Purpose: Frees the mpio-specific file access properties. * * Return: Success: 0 * * Failure: -1 * * Programmer: Albert Cheng * Jan 8, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t H5FD_mpio_fapl_free(void *_fa) { herr_t ret_value = SUCCEED; H5FD_mpio_fapl_t *fa = (H5FD_mpio_fapl_t*)_fa; FUNC_ENTER_NOAPI_NOINIT_NOERR #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) fprintf(stderr, "in H5FD_mpio_fapl_free\n"); #endif assert(fa); /* Free the internal communicator and INFO object */ assert(MPI_COMM_NULL!=fa->comm); H5FD_mpi_comm_info_free(&fa->comm, &fa->info); H5MM_xfree(fa); #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) fprintf(stderr, "leaving H5FD_mpio_fapl_free\n"); #endif FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpio_fapl_free() */ /*------------------------------------------------------------------------- * Function: H5FD_set_mpio_atomicity * * Purpose: Sets the atomicity mode * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Mohamad Chaarawi * Feb 14, 2012 * *------------------------------------------------------------------------- */ herr_t H5FD_set_mpio_atomicity(H5FD_t *_file, hbool_t flag) { H5FD_mpio_t *file = (H5FD_mpio_t*)_file; int mpi_code; /* MPI return code */ int temp_flag; herr_t ret_value = SUCCEED; FUNC_ENTER_NOAPI_NOINIT #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "Entering H5FD_set_mpio_atomicity\n"); #endif if (FALSE == flag) temp_flag = 0; else temp_flag = 1; /* set atomicity value */ if (MPI_SUCCESS != (mpi_code=MPI_File_set_atomicity(file->f, temp_flag))) HMPI_GOTO_ERROR(FAIL, "MPI_File_set_atomicity", mpi_code) done: #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "Leaving H5FD_set_mpio_atomicity\n"); #endif FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD_get_mpio_atomicity * * Purpose: Returns the atomicity mode * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Mohamad Chaarawi * Feb 14, 2012 * *------------------------------------------------------------------------- */ herr_t H5FD_get_mpio_atomicity(H5FD_t *_file, hbool_t *flag) { H5FD_mpio_t *file = (H5FD_mpio_t*)_file; int mpi_code; /* MPI return code */ int temp_flag; herr_t ret_value = SUCCEED; FUNC_ENTER_NOAPI_NOINIT #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "Entering H5FD_get_mpio_atomicity\n"); #endif /* get atomicity value */ if (MPI_SUCCESS != (mpi_code=MPI_File_get_atomicity(file->f, &temp_flag))) HMPI_GOTO_ERROR(FAIL, "MPI_File_get_atomicity", mpi_code) if (0 != temp_flag) *flag = TRUE; else *flag = FALSE; done: #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "Leaving H5FD_get_mpio_atomicity\n"); #endif FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD_mpio_open * * Purpose: Opens a file with name NAME. The FLAGS are a bit field with * purpose similar to the second argument of open(2) and which * are defined in H5Fpublic.h. The file access property list * FAPL_ID contains the properties driver properties and MAXADDR * is the largest address which this file will be expected to * access. This is collective. * * Return: Success: A new file pointer. * * Failure: NULL * * Programmer: * January 30, 1998 * * Modifications: * Robb Matzke, 1998-02-18 * Added the ACCESS_PARMS argument. Moved some error checking * here from elsewhere. * * rky, 1998-01-11 * Added H5FD_mpio_Debug debug flags controlled by MPI_Info. * * rky, 1998-08-28 * Init flag controlling redundant metadata writes to disk. * * rky, 1998-12-07 * Added barrier after MPI_File_set_size to prevent race * condition -- subsequent writes were being truncated, causing * holes in file. * * Robb Matzke, 1999-08-06 * Modified to work with the virtual file layer. * * rky & ppw, 1999-11-07 * Modified "H5FD_mpio_open" so that file-truncation is * avoided for brand-new files (with zero filesize). * * Albert Cheng, 2003-04-17 * Duplicate the communicator and Info object so that file is * insulated from the old one. *------------------------------------------------------------------------- */ static H5FD_t * H5FD_mpio_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t UNUSED maxaddr) { H5FD_mpio_t *file=NULL; MPI_File fh; unsigned file_opened=0; /* Flag to indicate that the file was successfully opened */ int mpi_amode; int mpi_rank; /* MPI rank of this process */ int mpi_size; /* Total number of MPI processes */ int mpi_code; /* mpi return code */ MPI_Offset size; const H5FD_mpio_fapl_t *fa=NULL; H5FD_mpio_fapl_t _fa; H5P_genplist_t *plist; /* Property list pointer */ MPI_Comm comm_dup=MPI_COMM_NULL; MPI_Info info_dup=MPI_INFO_NULL; H5FD_t *ret_value; /* Return value */ #ifndef H5_HAVE_MPI_GET_SIZE h5_stat_t stat_buf; #endif FUNC_ENTER_NOAPI_NOINIT #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) { fprintf(stdout, "Entering H5FD_mpio_open(name=\"%s\", flags=0x%x, " "fapl_id=%d, maxaddr=%lu)\n", name, flags, (int)fapl_id, (unsigned long)maxaddr); } #endif /* Obtain a pointer to mpio-specific file access properties */ if(NULL == (plist = H5P_object_verify(fapl_id, H5P_FILE_ACCESS))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a file access property list") if(H5P_FILE_ACCESS_DEFAULT == fapl_id || H5FD_MPIO != H5P_get_driver(plist)) { _fa.comm = MPI_COMM_SELF; /*default*/ _fa.info = MPI_INFO_NULL; /*default*/ fa = &_fa; } else { if(NULL == (fa = (const H5FD_mpio_fapl_t *)H5P_get_driver_info(plist))) HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, NULL, "bad VFL driver info") } /* Duplicate communicator and Info object for use by this file. */ if (FAIL==H5FD_mpi_comm_info_dup(fa->comm, fa->info, &comm_dup, &info_dup)) HGOTO_ERROR(H5E_INTERNAL, H5E_CANTCOPY, NULL, "Communicator/Info duplicate failed") /* convert HDF5 flags to MPI-IO flags */ /* some combinations are illegal; let MPI-IO figure it out */ mpi_amode = (flags&H5F_ACC_RDWR) ? MPI_MODE_RDWR : MPI_MODE_RDONLY; if (flags&H5F_ACC_CREAT) mpi_amode |= MPI_MODE_CREATE; if (flags&H5F_ACC_EXCL) mpi_amode |= MPI_MODE_EXCL; #ifdef H5FDmpio_DEBUG /* Check for debug commands in the info parameter */ { char debug_str[128]; int flag, i; if (MPI_INFO_NULL != info_dup) { /*OKAY: CAST DISCARDS CONST*/ MPI_Info_get(fa->info, (char *)H5F_MPIO_DEBUG_KEY, 127, debug_str, &flag); if (flag) { fprintf(stdout, "H5FD_mpio debug flags=%s\n", debug_str ); for (i=0; debug_str[i]/*end of string*/ && i<128/*just in case*/; ++i) { H5FD_mpio_Debug[(int)debug_str[i]] = 1; } } } } #endif /*OKAY: CAST DISCARDS CONST*/ if(MPI_SUCCESS != (mpi_code = MPI_File_open(comm_dup, (char*)name, mpi_amode, info_dup, &fh))) HMPI_GOTO_ERROR(NULL, "MPI_File_open failed", mpi_code) file_opened=1; /* Get the MPI rank of this process and the total number of processes */ if (MPI_SUCCESS != (mpi_code=MPI_Comm_rank (comm_dup, &mpi_rank))) HMPI_GOTO_ERROR(NULL, "MPI_Comm_rank failed", mpi_code) if (MPI_SUCCESS != (mpi_code=MPI_Comm_size (comm_dup, &mpi_size))) HMPI_GOTO_ERROR(NULL, "MPI_Comm_size failed", mpi_code) /* Build the return value and initialize it */ if(NULL == (file = (H5FD_mpio_t *)H5MM_calloc(sizeof(H5FD_mpio_t)))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "memory allocation failed") file->f = fh; file->comm = comm_dup; file->info = info_dup; file->mpi_rank = mpi_rank; file->mpi_size = mpi_size; /* Only processor p0 will get the filesize and broadcast it. */ if (mpi_rank == 0) { /* Get current file size. If MPI_File_get_size is disabled in configuration * because it doesn't return correct value (SGI Altix Propack 4), * use stat to get the file size. */ #ifdef H5_HAVE_MPI_GET_SIZE if (MPI_SUCCESS != (mpi_code=MPI_File_get_size(fh, &size))) HMPI_GOTO_ERROR(NULL, "MPI_File_get_size failed", mpi_code) #else if((mpi_code=HDstat(name, &stat_buf))<0) HMPI_GOTO_ERROR(NULL, "stat failed", mpi_code) /* Hopefully this casting is safe */ size = (MPI_Offset)(stat_buf.st_size); #endif } /* end if */ /* Broadcast file size */ if(MPI_SUCCESS != (mpi_code = MPI_Bcast(&size, (int)sizeof(MPI_Offset), MPI_BYTE, 0, comm_dup))) HMPI_GOTO_ERROR(NULL, "MPI_Bcast failed", mpi_code) /* Determine if the file should be truncated */ if(size && (flags & H5F_ACC_TRUNC)) { if (MPI_SUCCESS != (mpi_code=MPI_File_set_size(fh, (MPI_Offset)0))) HMPI_GOTO_ERROR(NULL, "MPI_File_set_size failed", mpi_code) /* Don't let any proc return until all have truncated the file. */ if (MPI_SUCCESS!= (mpi_code=MPI_Barrier(comm_dup))) HMPI_GOTO_ERROR(NULL, "MPI_Barrier failed", mpi_code) /* File is zero size now */ size = 0; } /* end if */ /* Set the size of the file (from library's perspective) */ file->eof = H5FD_mpi_MPIOff_to_haddr(size); /* Set return value */ ret_value=(H5FD_t*)file; done: if(ret_value==NULL) { if(file_opened) MPI_File_close(&fh); if (MPI_COMM_NULL != comm_dup) MPI_Comm_free(&comm_dup); if (MPI_INFO_NULL != info_dup) MPI_Info_free(&info_dup); if (file) H5MM_xfree(file); } /* end if */ #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "Leaving H5FD_mpio_open\n" ); #endif FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD_mpio_close * * Purpose: Closes a file. This is collective. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Unknown * January 30, 1998 * * Modifications: * Robb Matzke, 1998-02-18 * Added the ACCESS_PARMS argument. * * Robb Matzke, 1999-08-06 * Modified to work with the virtual file layer. * * Albert Cheng, 2003-04-17 * Free the communicator stored. *------------------------------------------------------------------------- */ static herr_t H5FD_mpio_close(H5FD_t *_file) { H5FD_mpio_t *file = (H5FD_mpio_t*)_file; int mpi_code; /* MPI return code */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI_NOINIT #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "Entering H5FD_mpio_close\n"); #endif assert(file); assert(H5FD_MPIO==file->pub.driver_id); /* MPI_File_close sets argument to MPI_FILE_NULL */ if (MPI_SUCCESS != (mpi_code=MPI_File_close(&(file->f)/*in,out*/))) HMPI_GOTO_ERROR(FAIL, "MPI_File_close failed", mpi_code) /* Clean up other stuff */ H5FD_mpi_comm_info_free(&file->comm, &file->info); H5MM_xfree(file); done: #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "Leaving H5FD_mpio_close\n"); #endif FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD_mpio_query * * Purpose: Set the flags that this VFL driver is capable of supporting. * (listed in H5FDpublic.h) * * Return: Success: non-negative * * Failure: negative * * Programmer: Quincey Koziol * Friday, August 25, 2000 * * Modifications: * * John Mainzer -- 9/21/05 * Modified code to turn off the * H5FD_FEAT_ACCUMULATE_METADATA_WRITE flag. * With the movement of * all cache writes to process 0, this flag has become * problematic in PHDF5. * *------------------------------------------------------------------------- */ static herr_t H5FD_mpio_query(const H5FD_t UNUSED *_file, unsigned long *flags /* out */) { FUNC_ENTER_NOAPI_NOINIT_NOERR /* Set the VFL feature flags that this driver supports */ if(flags) { *flags=0; *flags|=H5FD_FEAT_AGGREGATE_METADATA; /* OK to aggregate metadata allocations */ *flags|=H5FD_FEAT_AGGREGATE_SMALLDATA; /* OK to aggregate "small" raw data allocations */ } /* end if */ FUNC_LEAVE_NOAPI(SUCCEED) } /*------------------------------------------------------------------------- * Function: H5FD_mpio_get_eoa * * Purpose: Gets the end-of-address marker for the file. The EOA marker * is the first address past the last byte allocated in the * format address space. * * Return: Success: The end-of-address marker. * * Failure: HADDR_UNDEF * * Programmer: Robb Matzke * Friday, August 6, 1999 * * Modifications: * Raymond Lu * 21 Dec. 2006 * Added the parameter TYPE. It's only used for MULTI driver. * *------------------------------------------------------------------------- */ static haddr_t H5FD_mpio_get_eoa(const H5FD_t *_file, H5FD_mem_t UNUSED type) { const H5FD_mpio_t *file = (const H5FD_mpio_t*)_file; FUNC_ENTER_NOAPI_NOINIT_NOERR assert(file); assert(H5FD_MPIO==file->pub.driver_id); FUNC_LEAVE_NOAPI(file->eoa) } /*------------------------------------------------------------------------- * Function: H5FD_mpio_set_eoa * * Purpose: Set the end-of-address marker for the file. This function is * called shortly after an existing HDF5 file is opened in order * to tell the driver where the end of the HDF5 data is located. * * Return: Success: 0 * * Failure: -1 * * Programmer: Robb Matzke * Friday, August 6, 1999 * * Modifications: * Raymond Lu * 21 Dec. 2006 * Added the parameter TYPE. It's only used for MULTI driver. * *------------------------------------------------------------------------- */ static herr_t H5FD_mpio_set_eoa(H5FD_t *_file, H5FD_mem_t UNUSED type, haddr_t addr) { H5FD_mpio_t *file = (H5FD_mpio_t*)_file; FUNC_ENTER_NOAPI_NOINIT_NOERR assert(file); assert(H5FD_MPIO==file->pub.driver_id); file->eoa = addr; FUNC_LEAVE_NOAPI(SUCCEED) } /*------------------------------------------------------------------------- * Function: H5FD_mpio_get_eof * * Purpose: Gets the end-of-file marker for the file. The EOF marker * is the real size of the file. * * The MPIO driver doesn't bother keeping this field updated * since that's a relatively expensive operation. Fortunately * the library only needs the EOF just after the file is opened * in order to determine whether the file is empty, truncated, * or okay. Therefore, any MPIO I/O function will set its value * to HADDR_UNDEF which is the error return value of this * function. * * Keeping the EOF updated (during write calls) is expensive * because any process may extend the physical end of the * file. -QAK * * Return: Success: The end-of-address marker. * * Failure: HADDR_UNDEF * * Programmer: Robb Matzke * Friday, August 6, 1999 * * Modifications: * *------------------------------------------------------------------------- */ static haddr_t H5FD_mpio_get_eof(const H5FD_t *_file) { const H5FD_mpio_t *file = (const H5FD_mpio_t*)_file; FUNC_ENTER_NOAPI_NOINIT_NOERR assert(file); assert(H5FD_MPIO==file->pub.driver_id); FUNC_LEAVE_NOAPI(file->eof) } /*------------------------------------------------------------------------- * Function: H5FD_mpio_get_handle * * Purpose: Returns the file handle of MPIO file driver. * * Returns: Non-negative if succeed or negative if fails. * * Programmer: Raymond Lu * Sept. 16, 2002 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t H5FD_mpio_get_handle(H5FD_t *_file, hid_t UNUSED fapl, void** file_handle) { H5FD_mpio_t *file = (H5FD_mpio_t *)_file; herr_t ret_value = SUCCEED; FUNC_ENTER_NOAPI_NOINIT if(!file_handle) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "file handle not valid") *file_handle = &(file->f); done: FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD_mpio_read * * Purpose: Reads SIZE bytes of data from FILE beginning at address ADDR * into buffer BUF according to data transfer properties in * DXPL_ID using potentially complex file and buffer types to * effect the transfer. * * Reading past the end of the MPI file returns zeros instead of * failing. MPI is able to coalesce requests from different * processes (collective or independent). * * Return: Success: Zero. Result is stored in caller-supplied * buffer BUF. * * Failure: -1, Contents of buffer BUF are undefined. * * Programmer: rky, 1998-01-30 * * Modifications: * Robb Matzke, 1998-02-18 * Added the ACCESS_PARMS argument. * * rky, 1998-04-10 * Call independent or collective MPI read, based on * ACCESS_PARMS. * * Albert Cheng, 1998-06-01 * Added XFER_MODE to control independent or collective MPI * read. * * rky, 1998-08-16 * Use BTYPE, FTYPE, and DISP from access parms. The guts of * H5FD_mpio_read and H5FD_mpio_write should be replaced by a * single dual-purpose routine. * * Robb Matzke, 1999-04-21 * Changed XFER_MODE to XFER_PARMS for all H5F_*_read() * callbacks. * * Robb Matzke, 1999-07-28 * The ADDR argument is passed by value. * * Robb Matzke, 1999-08-06 * Modified to work with the virtual file layer. * * Quincey Koziol, 2002-05-14 * Only call MPI_Get_count if we can use MPI_BYTE for the MPI type * for the I/O transfer. Someday we might include code to decode * the MPI type used for more complicated transfers and call * MPI_Get_count all the time. * * Quincey Koziol - 2002/06/17 * Removed 'disp' parameter from H5FD_mpio_setup routine and use * the address of the dataset in MPI_File_set_view() calls, as * necessary. * * Quincey Koziol - 2002/06/24 * Removed "lazy" MPI_File_set_view() calls, since they would fail * if the first I/O was a collective I/O using MPI derived types * and the next I/O was an independent I/O. * * Quincey Koziol - 2003/10/22-31 * Restructured code massively, straightening out logic and finally * getting the bytes_read stuff working. * *------------------------------------------------------------------------- */ static herr_t H5FD_mpio_read(H5FD_t *_file, H5FD_mem_t UNUSED type, hid_t dxpl_id, haddr_t addr, size_t size, void *buf/*out*/) { H5FD_mpio_t *file = (H5FD_mpio_t*)_file; MPI_Offset mpi_off; MPI_Status mpi_stat; /* Status from I/O operation */ int mpi_code; /* mpi return code */ MPI_Datatype buf_type = MPI_BYTE; /* MPI description of the selection in memory */ int size_i; /* Integer copy of 'size' to read */ int bytes_read; /* Number of bytes read in */ int n; int type_size; /* MPI datatype used for I/O's size */ int io_size; /* Actual number of bytes requested */ H5P_genplist_t *plist = NULL; /* Property list pointer */ hbool_t use_view_this_time = FALSE; herr_t ret_value = SUCCEED; FUNC_ENTER_NOAPI_NOINIT #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "Entering H5FD_mpio_read\n" ); #endif assert(file); assert(H5FD_MPIO==file->pub.driver_id); /* Make certain we have the correct type of property list */ assert(H5I_GENPROP_LST==H5I_get_type(dxpl_id)); assert(TRUE==H5P_isa_class(dxpl_id,H5P_DATASET_XFER)); assert(buf); /* Portably initialize MPI status variable */ HDmemset(&mpi_stat,0,sizeof(MPI_Status)); /* some numeric conversions */ if (H5FD_mpi_haddr_to_MPIOff(addr, &mpi_off/*out*/)<0) HGOTO_ERROR(H5E_INTERNAL, H5E_BADRANGE, FAIL, "can't convert from haddr to MPI off") size_i = (int)size; if ((hsize_t)size_i != size) HGOTO_ERROR(H5E_INTERNAL, H5E_BADRANGE, FAIL, "can't convert from size to size_i") #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'r']) fprintf(stdout, "in H5FD_mpio_read mpi_off=%ld size_i=%d\n", (long)mpi_off, size_i ); #endif /* Only look for MPI views for raw data transfers */ if(type==H5FD_MEM_DRAW) { H5FD_mpio_xfer_t xfer_mode; /* I/O tranfer mode */ /* Obtain the data transfer properties */ if(NULL == (plist = (H5P_genplist_t *)H5I_object(dxpl_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list") xfer_mode = (H5FD_mpio_xfer_t)H5P_peek_unsigned(plist, H5D_XFER_IO_XFER_MODE_NAME); /* * Set up for a fancy xfer using complex types, or single byte block. We * wouldn't need to rely on the use_view field if MPI semantics allowed * us to test that btype=ftype=MPI_BYTE (or even MPI_TYPE_NULL, which * could mean "use MPI_BYTE" by convention). */ if(xfer_mode==H5FD_MPIO_COLLECTIVE) { MPI_Datatype file_type; /* Remember that views are used */ use_view_this_time = TRUE; /* prepare for a full-blown xfer using btype, ftype, and disp */ if(H5P_get(plist,H5FD_MPI_XFER_MEM_MPI_TYPE_NAME,&buf_type)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get MPI-I/O type property") if(H5P_get(plist,H5FD_MPI_XFER_FILE_MPI_TYPE_NAME,&file_type)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get MPI-I/O type property") /* * Set the file view when we are using MPI derived types */ /*OKAY: CAST DISCARDS CONST QUALIFIER*/ if (MPI_SUCCESS != (mpi_code=MPI_File_set_view(file->f, mpi_off, MPI_BYTE, file_type, H5FD_mpi_native_g, file->info))) HMPI_GOTO_ERROR(FAIL, "MPI_File_set_view failed", mpi_code) /* When using types, use the address as the displacement for * MPI_File_set_view and reset the address for the read to zero */ mpi_off=0; } /* end if */ } /* end if */ /* Read the data. */ if(use_view_this_time) { H5FD_mpio_collective_opt_t coll_opt_mode; #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "H5FD_mpio_read: using MPIO collective mode\n"); #endif /* Peek the collective_opt property to check whether the application wants to do IO individually. */ HDassert(plist); coll_opt_mode = (H5FD_mpio_collective_opt_t)H5P_peek_unsigned(plist, H5D_XFER_MPIO_COLLECTIVE_OPT_NAME); if(coll_opt_mode == H5FD_MPIO_COLLECTIVE_IO) { #ifdef H5FDmpio_DEBUG if(H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "H5FD_mpio_read: doing MPI collective IO\n"); #endif if(MPI_SUCCESS != (mpi_code = MPI_File_read_at_all(file->f, mpi_off, buf, size_i, buf_type, &mpi_stat))) HMPI_GOTO_ERROR(FAIL, "MPI_File_read_at_all failed", mpi_code) } /* end if */ else { #ifdef H5FDmpio_DEBUG if(H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "H5FD_mpio_read: doing MPI independent IO\n"); #endif if(MPI_SUCCESS != (mpi_code = MPI_File_read_at(file->f, mpi_off, buf, size_i, buf_type, &mpi_stat))) HMPI_GOTO_ERROR(FAIL, "MPI_File_read_at failed", mpi_code) } /* end else */ /* * Reset the file view when we used MPI derived types */ /*OKAY: CAST DISCARDS CONST QUALIFIER*/ if(MPI_SUCCESS != (mpi_code = MPI_File_set_view(file->f, (MPI_Offset)0, MPI_BYTE, MPI_BYTE, H5FD_mpi_native_g, file->info))) HMPI_GOTO_ERROR(FAIL, "MPI_File_set_view failed", mpi_code) } else { if(MPI_SUCCESS != (mpi_code = MPI_File_read_at(file->f, mpi_off, buf, size_i, buf_type, &mpi_stat))) HMPI_GOTO_ERROR(FAIL, "MPI_File_read_at failed", mpi_code) } /* How many bytes were actually read? */ /* [This works because the "basic elements" we use for all our MPI derived * types are MPI_BYTE. We should be using the 'buf_type' for the MPI * datatype in this call though... (We aren't because using it causes * the LANL "qsc" machine to dump core - 12/19/03) - QAK] */ if (MPI_SUCCESS != (mpi_code=MPI_Get_elements(&mpi_stat, MPI_BYTE, &bytes_read))) HMPI_GOTO_ERROR(FAIL, "MPI_Get_elements failed", mpi_code) /* Get the type's size */ if (MPI_SUCCESS != (mpi_code=MPI_Type_size(buf_type,&type_size))) HMPI_GOTO_ERROR(FAIL, "MPI_Type_size failed", mpi_code) /* Compute the actual number of bytes requested */ io_size=type_size*size_i; /* Check for read failure */ if (bytes_read<0 || bytes_read>io_size) HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "file read failed") /* * This gives us zeroes beyond end of physical MPI file. */ if ((n=(io_size-bytes_read)) > 0) HDmemset((char*)buf+bytes_read, 0, (size_t)n); done: #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "Leaving H5FD_mpio_read\n" ); #endif FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD_mpio_write * * Purpose: Writes SIZE bytes of data to FILE beginning at address ADDR * from buffer BUF according to data transfer properties in * DXPL_ID using potentially complex file and buffer types to * effect the transfer. * * MPI is able to coalesce requests from different processes * (collective and independent). * * Return: Success: Zero. USE_TYPES and OLD_USE_TYPES in the * access params are altered. * * Failure: -1, USE_TYPES and OLD_USE_TYPES in the * access params may be altered. * * Programmer: Unknown * January 30, 1998 * * Modifications: * rky, 1998-08-28 * If the file->allsame flag is set, we assume that all the * procs in the relevant MPI communicator will write identical * data at identical offsets in the file, so only proc 0 will * write, and all other procs will wait for p0 to finish. This * is useful for writing metadata, for example. Note that we * don't _check_ that the data is identical. Also, the mechanism * we use to eliminate the redundant writes is by requiring a * call to H5FD_mpio_tas_allsame before the write, which is * rather klugey. Would it be better to pass a parameter to * low-level writes like H5F_block_write and H5F_low_write, * instead? Or...??? Also, when I created this mechanism I * wanted to minimize the difference in behavior between the old * way of doing things (i.e., all procs write) and the new way, * so the writes are eliminated at the very lowest level, here * in H5FD_mpio_write. It may be better to rethink that, and * short-circuit the writes at a higher level (e.g., at the * points in the code where H5FD_mpio_tas_allsame is called). * * * Robb Matzke, 1998-02-18 * Added the ACCESS_PARMS argument. * * rky, 1998-04-10 * Call independent or collective MPI write, based on * ACCESS_PARMS. * * rky, 1998-04-24 * Removed redundant write from H5FD_mpio_write. * * Albert Cheng, 1998-06-01 * Added XFER_MODE to control independent or collective MPI * write. * * rky, 1998-08-16 * Use BTYPE, FTYPE, and DISP from access parms. The guts of * H5FD_mpio_read and H5FD_mpio_write should be replaced by a * single dual-purpose routine. * * rky, 1998-08-28 * Added ALLSAME parameter to make all but proc 0 skip the * actual write. * * Robb Matzke, 1999-04-21 * Changed XFER_MODE to XFER_PARMS for all H5FD_*_write() * callbacks. * * Robb Matzke, 1999-07-28 * The ADDR argument is passed by value. * * Robb Matzke, 1999-08-06 * Modified to work with the virtual file layer. * * Albert Cheng, 1999-12-19 * When only-p0-write-allsame-data, p0 Bcasts the * ret_value to other processes. This prevents * a racing condition (that other processes try to * read the file before p0 finishes writing) and also * allows all processes to report the same ret_value. * * Kim Yates, Pat Weidhaas, 2000-09-26 * Move block of coding where only p0 writes after the * MPI_File_set_view call. * * Quincey Koziol, 2002-05-10 * Instead of always writing metadata from process 0, spread the * burden among all the processes by using a round-robin rotation * scheme. * * Quincey Koziol, 2002-05-10 * Removed allsame code, keying off the type parameter instead. * * Quincey Koziol, 2002-05-14 * Only call MPI_Get_count if we can use MPI_BYTE for the MPI type * for the I/O transfer. Someday we might include code to decode * the MPI type used for more complicated transfers and call * MPI_Get_count all the time. * * Quincey Koziol - 2002/06/17 * Removed 'disp' parameter from H5FD_mpio_setup routine and use * the address of the dataset in MPI_File_set_view() calls, as * necessary. * * Quincey Koziol - 2002/06/24 * Removed "lazy" MPI_File_set_view() calls, since they would fail * if the first I/O was a collective I/O using MPI derived types * and the next I/O was an independent I/O. * * Quincey Koziol - 2002/07/18 * Added "block_before_meta_write" dataset transfer flag, which * is set during writes from a metadata cache flush and indicates * that all the processes must sync up before (one of them) * writing metadata. * * Quincey Koziol - 2003/10/22-31 * Restructured code massively, straightening out logic and finally * getting the bytes_written stuff working. * *------------------------------------------------------------------------- */ static herr_t H5FD_mpio_write(H5FD_t *_file, H5FD_mem_t type, hid_t dxpl_id, haddr_t addr, size_t size, const void *buf) { H5FD_mpio_t *file = (H5FD_mpio_t*)_file; MPI_Offset mpi_off; MPI_Status mpi_stat; /* Status from I/O operation */ MPI_Datatype buf_type = MPI_BYTE; /* MPI description of the selection in memory */ int mpi_code; /* MPI return code */ int size_i, bytes_written; int type_size; /* MPI datatype used for I/O's size */ int io_size; /* Actual number of bytes requested */ hbool_t use_view_this_time = FALSE; H5P_genplist_t *plist = NULL; /* Property list pointer */ herr_t ret_value = SUCCEED; FUNC_ENTER_NOAPI_NOINIT #ifdef H5FDmpio_DEBUG if (H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "Entering H5FD_mpio_write\n" ); #endif assert(file); assert(H5FD_MPIO==file->pub.driver_id); /* Make certain we have the correct type of property list */ assert(H5I_GENPROP_LST==H5I_get_type(dxpl_id)); assert(TRUE==H5P_isa_class(dxpl_id,H5P_DATASET_XFER)); assert(buf); /* Portably initialize MPI status variable */ HDmemset(&mpi_stat, 0, sizeof(MPI_Status)); /* some numeric conversions */ if(H5FD_mpi_haddr_to_MPIOff(addr, &mpi_off) < 0) HGOTO_ERROR(H5E_INTERNAL, H5E_BADRANGE, FAIL, "can't convert from haddr to MPI off") size_i = (int)size; if((hsize_t)size_i != size) HGOTO_ERROR(H5E_INTERNAL, H5E_BADRANGE, FAIL, "can't convert from size to size_i") #ifdef H5FDmpio_DEBUG if(H5FD_mpio_Debug[(int)'w']) fprintf(stdout, "in H5FD_mpio_write mpi_off=%ld size_i=%d\n", (long)mpi_off, size_i); #endif if(type == H5FD_MEM_DRAW) { H5FD_mpio_xfer_t xfer_mode; /* I/O tranfer mode */ /* Obtain the data transfer properties */ if(NULL == (plist = (H5P_genplist_t *)H5I_object(dxpl_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list") /* Obtain the data transfer properties */ xfer_mode = (H5FD_mpio_xfer_t)H5P_peek_unsigned(plist, H5D_XFER_IO_XFER_MODE_NAME); /* * Set up for a fancy xfer using complex types, or single byte block. We * wouldn't need to rely on the use_view field if MPI semantics allowed * us to test that btype=ftype=MPI_BYTE (or even MPI_TYPE_NULL, which * could mean "use MPI_BYTE" by convention). */ if(xfer_mode == H5FD_MPIO_COLLECTIVE) { MPI_Datatype file_type; /* Remember that views are used */ use_view_this_time = TRUE; /* prepare for a full-blown xfer using btype, ftype, and disp */ if(H5P_get(plist, H5FD_MPI_XFER_MEM_MPI_TYPE_NAME, &buf_type) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get MPI-I/O type property") if(H5P_get(plist, H5FD_MPI_XFER_FILE_MPI_TYPE_NAME, &file_type) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get MPI-I/O type property") /* * Set the file view when we are using MPI derived types */ /*OKAY: CAST DISCARDS CONST QUALIFIER*/ if(MPI_SUCCESS != (mpi_code = MPI_File_set_view(file->f, mpi_off, MPI_BYTE, file_type, H5FD_mpi_native_g, file->info))) HMPI_GOTO_ERROR(FAIL, "MPI_File_set_view failed", mpi_code) /* When using types, use the address as the displacement for * MPI_File_set_view and reset the address for the read to zero */ mpi_off = 0; } /* end if */ } /* end if */ else { #if 0 /* JRM -- 3/23/10 */ /* this is no longer always the case */ /* Only one process can do the actual metadata write */ if(file->mpi_rank != H5_PAR_META_WRITE) #ifdef LATER HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "can't write metadata from non-zero rank") #else /* LATER */ HGOTO_DONE(SUCCEED) /* skip the actual write */ #endif /* LATER */ #endif /* JRM */ } /* end if */ /* Write the data. */ if(use_view_this_time) { H5FD_mpio_collective_opt_t coll_opt_mode; #ifdef H5FDmpio_DEBUG if(H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "H5FD_mpio_write: using MPIO collective mode\n"); #endif /* Peek the collective_opt property to check whether the application wants to do IO individually. */ HDassert(plist); coll_opt_mode = (H5FD_mpio_collective_opt_t)H5P_peek_unsigned(plist, H5D_XFER_MPIO_COLLECTIVE_OPT_NAME); /*OKAY: CAST DISCARDS CONST QUALIFIER*/ if(coll_opt_mode == H5FD_MPIO_COLLECTIVE_IO) { #ifdef H5FDmpio_DEBUG if(H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "H5FD_mpio_write: doing MPI collective IO\n"); #endif if(MPI_SUCCESS != (mpi_code = MPI_File_write_at_all(file->f, mpi_off, (void*)buf, size_i, buf_type, &mpi_stat))) HMPI_GOTO_ERROR(FAIL, "MPI_File_write_at_all failed", mpi_code) } /* end if */ else { #ifdef H5FDmpio_DEBUG if(H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "H5FD_mpio_write: doing MPI independent IO\n"); #endif if(MPI_SUCCESS != (mpi_code = MPI_File_write_at(file->f, mpi_off, (void*)buf, size_i, buf_type, &mpi_stat))) HMPI_GOTO_ERROR(FAIL, "MPI_File_write_at failed", mpi_code) } /* end else */ /* Reset the file view when we used MPI derived types */ /*OKAY: CAST DISCARDS CONST QUALIFIER*/ if(MPI_SUCCESS != (mpi_code = MPI_File_set_view(file->f, (MPI_Offset)0, MPI_BYTE, MPI_BYTE, H5FD_mpi_native_g, file->info))) HMPI_GOTO_ERROR(FAIL, "MPI_File_set_view failed", mpi_code) } else { /*OKAY: CAST DISCARDS CONST QUALIFIER*/ if(MPI_SUCCESS != (mpi_code = MPI_File_write_at(file->f, mpi_off, (void*)buf, size_i, buf_type, &mpi_stat))) HMPI_GOTO_ERROR(FAIL, "MPI_File_write_at failed", mpi_code) } /* How many bytes were actually written? */ /* [This works because the "basic elements" we use for all our MPI derived * types are MPI_BYTE. We should be using the 'buf_type' for the MPI * datatype in this call though... (We aren't because using it causes * the LANL "qsc" machine to dump core - 12/19/03) - QAK] */ if(MPI_SUCCESS != (mpi_code = MPI_Get_elements(&mpi_stat, MPI_BYTE, &bytes_written))) HMPI_GOTO_ERROR(FAIL, "MPI_Get_elements failed", mpi_code) /* Get the type's size */ if(MPI_SUCCESS != (mpi_code = MPI_Type_size(buf_type, &type_size))) HMPI_GOTO_ERROR(FAIL, "MPI_Type_size failed", mpi_code) /* Compute the actual number of bytes requested */ io_size = type_size * size_i; /* Check for write failure */ if(bytes_written != io_size) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "file write failed") /* Forget the EOF value (see H5FD_mpio_get_eof()) --rpm 1999-08-06 */ file->eof = HADDR_UNDEF; done: #ifdef H5FDmpio_DEBUG if(H5FD_mpio_Debug[(int)'t']) fprintf(stdout, "proc %d: Leaving H5FD_mpio_write with ret_value=%d\n", file->mpi_rank, ret_value ); #endif FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpio_write() */ /*------------------------------------------------------------------------- * Function: H5FD_mpio_flush * * Purpose: Makes sure that all data is on disk. This is collective. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * January 30, 1998 * *------------------------------------------------------------------------- */ static herr_t H5FD_mpio_flush(H5FD_t *_file, hid_t UNUSED dxpl_id, unsigned closing) { H5FD_mpio_t *file = (H5FD_mpio_t*)_file; int mpi_code; /* mpi return code */ herr_t ret_value = SUCCEED; FUNC_ENTER_NOAPI_NOINIT #ifdef H5FDmpio_DEBUG if(H5FD_mpio_Debug[(int)'t']) HDfprintf(stdout, "Entering %s\n", FUNC); #endif HDassert(file); HDassert(H5FD_MPIO == file->pub.driver_id); /* Only sync the file if we are not going to immediately close it */ if(!closing) { if(MPI_SUCCESS != (mpi_code = MPI_File_sync(file->f))) HMPI_GOTO_ERROR(FAIL, "MPI_File_sync failed", mpi_code) } /* end if */ done: #ifdef H5FDmpio_DEBUG if(H5FD_mpio_Debug[(int)'t']) HDfprintf(stdout, "Leaving %s\n", FUNC); #endif FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpio_flush() */ /*------------------------------------------------------------------------- * Function: H5FD_mpio_truncate * * Purpose: Make certain the file's size matches it's allocated size * * Return: Success: Non-negative * Failure: Negative * * Programmer: Quincey Koziol * January 31, 2008 * *------------------------------------------------------------------------- */ static herr_t H5FD_mpio_truncate(H5FD_t *_file, hid_t UNUSED dxpl_id, hbool_t UNUSED closing) { H5FD_mpio_t *file = (H5FD_mpio_t*)_file; herr_t ret_value = SUCCEED; FUNC_ENTER_NOAPI_NOINIT #ifdef H5FDmpio_DEBUG if(H5FD_mpio_Debug[(int)'t']) HDfprintf(stdout, "Entering %s\n", FUNC); #endif HDassert(file); HDassert(H5FD_MPIO == file->pub.driver_id); /* Extend the file to make sure it's large enough, then sync. * Unfortunately, keeping track of EOF is an expensive operation, so * we can't just check whether EOFeoa > file->last_eoa) { int mpi_code; /* mpi return code */ MPI_Offset mpi_off; #ifdef H5_MPI_FILE_SET_SIZE_BIG if(H5FD_mpi_haddr_to_MPIOff(file->eoa, &mpi_off) < 0) HGOTO_ERROR(H5E_INTERNAL, H5E_BADRANGE, FAIL, "cannot convert from haddr_t to MPI_Offset") /* Extend the file's size */ if(MPI_SUCCESS != (mpi_code = MPI_File_set_size(file->f, mpi_off))) HMPI_GOTO_ERROR(FAIL, "MPI_File_set_size failed", mpi_code) #else /* H5_MPI_FILE_SET_SIZE_BIG */ /* Wait until all processes are here before reading/writing the byte at * process 0's end of address space. The window for corruption is * probably tiny, but does exist... */ if(MPI_SUCCESS != (mpi_code = MPI_Barrier(file->comm))) HMPI_GOTO_ERROR(FAIL, "MPI_Barrier failed", mpi_code) if(0 == file->mpi_rank) { uint8_t byte = 0; MPI_Status mpi_stat; /* Portably initialize MPI status variable */ HDmemset(&mpi_stat, 0, sizeof(MPI_Status)); if(H5FD_mpi_haddr_to_MPIOff(file->eoa-1, &mpi_off) < 0) HGOTO_ERROR(H5E_INTERNAL, H5E_BADRANGE, FAIL, "cannot convert from haddr_t to MPI_Offset") if(MPI_SUCCESS != (mpi_code = MPI_File_read_at(file->f, mpi_off, &byte, 1, MPI_BYTE, &mpi_stat))) HMPI_GOTO_ERROR(FAIL, "MPI_File_read_at failed", mpi_code) if(MPI_SUCCESS != (mpi_code = MPI_File_write_at(file->f, mpi_off, &byte, 1, MPI_BYTE, &mpi_stat))) HMPI_GOTO_ERROR(FAIL, "MPI_File_write_at failed", mpi_code) } /* end if */ #endif /* H5_MPI_FILE_SET_SIZE_BIG */ /* Don't let any proc return until all have extended the file. * (Prevents race condition where some processes go ahead and write * more data to the file before all the processes have finished making * it the shorter length, potentially truncating the file and dropping * the new data written) */ if(MPI_SUCCESS != (mpi_code = MPI_Barrier(file->comm))) HMPI_GOTO_ERROR(FAIL, "MPI_Barrier failed", mpi_code) /* Update the 'last' eoa value */ file->last_eoa = file->eoa; } /* end if */ done: #ifdef H5FDmpio_DEBUG if(H5FD_mpio_Debug[(int)'t']) HDfprintf(stdout, "Leaving %s\n", FUNC); #endif FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpio_truncate() */ /*------------------------------------------------------------------------- * Function: H5FD_mpio_mpi_rank * * Purpose: Returns the MPI rank for a process * * Return: Success: non-negative * Failure: negative * * Programmer: Quincey Koziol * Thursday, May 16, 2002 * * Modifications: * *------------------------------------------------------------------------- */ static int H5FD_mpio_mpi_rank(const H5FD_t *_file) { const H5FD_mpio_t *file = (const H5FD_mpio_t*)_file; FUNC_ENTER_NOAPI_NOINIT_NOERR assert(file); assert(H5FD_MPIO==file->pub.driver_id); FUNC_LEAVE_NOAPI(file->mpi_rank) } /* end H5FD_mpio_mpi_rank() */ /*------------------------------------------------------------------------- * Function: H5FD_mpio_mpi_size * * Purpose: Returns the number of MPI processes * * Return: Success: non-negative * Failure: negative * * Programmer: Quincey Koziol * Thursday, May 16, 2002 * * Modifications: * *------------------------------------------------------------------------- */ static int H5FD_mpio_mpi_size(const H5FD_t *_file) { const H5FD_mpio_t *file = (const H5FD_mpio_t*)_file; FUNC_ENTER_NOAPI_NOINIT_NOERR assert(file); assert(H5FD_MPIO==file->pub.driver_id); FUNC_LEAVE_NOAPI(file->mpi_size) } /* end H5FD_mpio_mpi_size() */ /*------------------------------------------------------------------------- * Function: H5FD_mpio_communicator * * Purpose: Returns the MPI communicator for the file. * * Return: Success: The communicator * * Failure: NULL * * Programmer: Robb Matzke * Monday, August 9, 1999 * * Modifications: * *------------------------------------------------------------------------- */ static MPI_Comm H5FD_mpio_communicator(const H5FD_t *_file) { const H5FD_mpio_t *file = (const H5FD_mpio_t*)_file; FUNC_ENTER_NOAPI_NOINIT_NOERR assert(file); assert(H5FD_MPIO==file->pub.driver_id); FUNC_LEAVE_NOAPI(file->comm) } #endif /* H5_HAVE_PARALLEL */