/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Purpose: This is a "combination" MPI-2 and posix I/O driver. * It uses MPI for coordinating the actions of several processes * and posix I/O calls to do the actual I/O to the disk. * * This driver was derived from the H5FDmpio.c driver and may * share bugs/quirks/etc. * * Limitations: * There is no "collective" I/O mode with this driver. * * This will almost certainly _not_ work correctly for files * accessed on distributed parallel systems with the file located * on a non-parallel filesystem. * */ /* Interface initialization */ #define H5_INTERFACE_INIT_FUNC H5FD_mpiposix_init_interface #include "H5private.h" /* Generic Functions */ #include "H5AC1private.h" /* Metadata cache */ #include "H5Eprivate.h" /* Error handling */ #include "H5Fprivate.h" /* File access */ #include "H5FDprivate.h" /* File drivers */ #include "H5FDmpi.h" /* MPI-based file drivers */ #include "H5Iprivate.h" /* IDs */ #include "H5MMprivate.h" /* Memory management */ #include "H5Pprivate.h" /* Property lists */ /* Features: * H5_HAVE_GPFS -- issue gpfs_fcntl() calls to hopefully improve * performance when accessing files on a GPFS * file system. * * REPORT_IO -- if set then report all POSIX file calls to stderr. * */ /* #define REPORT_IO */ #ifdef H5_HAVE_GPFS # include #endif #ifdef H5_HAVE_PARALLEL /* * The driver identification number, initialized at runtime if H5_HAVE_PARALLEL * is defined. This allows applications to still have the H5FD_MPIPOSIX * "constants" in their source code (it also makes this file strictly ANSI * compliant when H5_HAVE_PARALLEL isn't defined) */ static hid_t H5FD_MPIPOSIX_g = 0; /* File operations */ #define OP_UNKNOWN 0 #define OP_READ 1 #define OP_WRITE 2 /* * The description of a file belonging to this driver. * The EOF value * is only used just after the file is opened in order for the library to * determine whether the file is empty, truncated, or okay. The MPIPOSIX driver * doesn't bother to keep it updated since it's an expensive operation. */ typedef struct H5FD_mpiposix_t { H5FD_t pub; /*public stuff, must be first */ int fd; /*the unix file handle */ MPI_Comm comm; /*communicator */ int mpi_rank; /* This process's rank */ int mpi_size; /* Total number of processes */ haddr_t eof; /*end-of-file marker */ haddr_t eoa; /*end-of-address marker */ haddr_t last_eoa; /* Last known end-of-address marker */ haddr_t pos; /* Current file I/O position */ int op; /* Last file I/O operation */ hsize_t naccess; /* Number of (write) accesses to file */ #ifdef H5_HAVE_GPFS size_t blksize; /* Block size of file system */ #endif hbool_t use_gpfs; /* Use GPFS to write things */ #ifndef _WIN32 /* * On most systems the combination of device and i-node number uniquely * identify a file. */ dev_t device; /*file device number */ ino_t inode; /*file i-node number */ #else /* * On _WIN32 the low-order word of a unique identifier associated with the * file and the volume serial number uniquely identify a file. This number * (which, both? -rpm) may change when the system is restarted or when the * file is opened. After a process opens a file, the identifier is * constant until the file is closed. An application can use this * identifier and the volume serial number to determine whether two * handles refer to the same file. */ int fileindexlo; int fileindexhi; #endif } H5FD_mpiposix_t; /* * This driver supports systems that have the lseek64() function by defining * some macros here so we don't have to have conditional compilations later * throughout the code. * * file_offset_t: The datatype for file offsets, the second argument of * the lseek() or lseek64() call. * * file_seek: The function which adjusts the current file position, * either lseek() or lseek64(). */ /* adding for windows NT file system support. */ #ifdef H5_HAVE_LSEEK64 # define file_offset_t off64_t # define file_seek lseek64 # define file_truncate ftruncate64 #elif defined (_WIN32) && !defined(__MWERKS__) # /*MSVC*/ # define file_offset_t __int64 # define file_seek _lseeki64 # define file_truncate _ftruncatei64 #else # define file_offset_t off_t # define file_seek HDlseek # define file_truncate HDftruncate #endif /* * These macros check for overflow of various quantities. These macros * assume that file_offset_t is signed and haddr_t and size_t are unsigned. * * ADDR_OVERFLOW: Checks whether a file address of type `haddr_t' * is too large to be represented by the second argument * of the file seek function. * * SIZE_OVERFLOW: Checks whether a buffer size of type `hsize_t' is too * large to be represented by the `size_t' type. * * REGION_OVERFLOW: Checks whether an address and size pair describe data * which can be addressed entirely by the second * argument of the file seek function. */ #define MAXADDR (((haddr_t)1<<(8*sizeof(file_offset_t)-1))-1) #define ADDR_OVERFLOW(A) (HADDR_UNDEF==(A) || \ ((A) & ~(haddr_t)MAXADDR)) #define SIZE_OVERFLOW(Z) ((Z) & ~(hsize_t)MAXADDR) #define REGION_OVERFLOW(A,Z) (ADDR_OVERFLOW(A) || SIZE_OVERFLOW(Z) || \ sizeof(file_offset_t) * * Programmer: Quincey Koziol * Friday, Jan 30, 2004 * * Modification: * *--------------------------------------------------------------------------- */ void H5FD_mpiposix_term(void) { FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5FD_mpiposix_term) /* Reset VFL ID */ H5FD_MPIPOSIX_g=0; FUNC_LEAVE_NOAPI_VOID } /* end H5FD_mpiposix_term() */ /*------------------------------------------------------------------------- * Function: H5Pset_fapl_mpiposix * * Purpose: Store the user supplied MPI communicator COMM in * the file access property list FAPL_ID which can then be used * to create and/or open the file. This function is available * only in the parallel HDF5 library and is not collective. * * comm is the MPI communicator to be used for file open as * defined in MPI_FILE_OPEN of MPI-2. This function makes a * duplicate of comm. Any modification to comm after this function * call returns has no effect on the access property list. * * If fapl_id has previously set comm value, it will be replaced * and the old communicator is freed. * * Return: Success: Non-negative * Failure: Negative * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * Albert Cheng, 2003-04-24 * Modified the description of the function that it now stores * a duplicate of the communicator. Free the old duplicate if * previously set. (Work is actually done by H5P_set_driver.) * * Bill Wendling, 2003-05-01 * Modified to take an extra flag indicating that we should * use the GPFS hints (if available) for this file. * *------------------------------------------------------------------------- */ herr_t H5Pset_fapl_mpiposix(hid_t fapl_id, MPI_Comm comm, hbool_t use_gpfs) { H5FD_mpiposix_fapl_t fa; H5P_genplist_t *plist; /* Property list pointer */ herr_t ret_value; FUNC_ENTER_API(H5Pset_fapl_mpiposix, FAIL) H5TRACE3("e", "iMcb", fapl_id, comm, use_gpfs); /* Check arguments */ if(NULL == (plist = H5P_object_verify(fapl_id,H5P_FILE_ACCESS))) HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a file access list") if (MPI_COMM_NULL == comm) HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a valid communicator") /* Initialize driver specific properties */ fa.comm = comm; fa.use_gpfs = use_gpfs; /* duplication is done during driver setting. */ ret_value= H5P_set_driver(plist, H5FD_MPIPOSIX, &fa); done: FUNC_LEAVE_API(ret_value) } /* end H5Pset_fapl_mpiposix() */ /*------------------------------------------------------------------------- * Function: H5Pget_fapl_mpiposix * * Purpose: If the file access property list is set to the H5FD_MPIPOSIX * driver then this function returns a duplicate of the MPI * communicator through the comm pointer. It is the responsibility * of the application to free the returned communicator. * * Return: Success: Non-negative with the communicator and * information returned through the COMM * argument if non-null. Since it is a duplicate * of the stored object, future modifications to * the access property list do not affect it and * it is the responsibility of the application to * free it. * * Failure: Negative * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * Albert Cheng, 2003-04-24 * Return duplicate of the stored communicator. * * Bill Wendling, 2003-05-01 * Return the USE_GPFS flag. * *------------------------------------------------------------------------- */ herr_t H5Pget_fapl_mpiposix(hid_t fapl_id, MPI_Comm *comm/*out*/, hbool_t *use_gpfs/*out*/) { H5FD_mpiposix_fapl_t *fa; H5P_genplist_t *plist; /* Property list pointer */ int mpi_code; /* mpi return code */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_API(H5Pget_fapl_mpiposix, FAIL) H5TRACE3("e", "ixx", fapl_id, comm, use_gpfs); if(NULL == (plist = H5P_object_verify(fapl_id,H5P_FILE_ACCESS))) HGOTO_ERROR(H5E_PLIST, H5E_BADTYPE, FAIL, "not a file access list") if (H5FD_MPIPOSIX!=H5P_get_driver(plist)) HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "incorrect VFL driver") if (NULL==(fa=H5P_get_driver_info(plist))) HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "bad VFL driver info") /* Get MPI Communicator */ if (comm){ if (MPI_SUCCESS != (mpi_code=MPI_Comm_dup(fa->comm, comm))) HMPI_GOTO_ERROR(FAIL, "MPI_Comm_dup failed", mpi_code) } if (use_gpfs) *use_gpfs = fa->use_gpfs; done: FUNC_LEAVE_API(ret_value) } /* end H5Pget_fapl_mpiposix() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_fapl_get * * Purpose: Returns a file access property list which could be used to * create another file the same as this one. * * Return: Success: Ptr to new file access property list with all * fields copied from the file pointer. * * Failure: NULL * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * Albert Cheng, 2003-04-24 * Duplicate the communicator object so that the new * property list is insulated from the old one. * *------------------------------------------------------------------------- */ static void * H5FD_mpiposix_fapl_get(H5FD_t *_file) { H5FD_mpiposix_t *file = (H5FD_mpiposix_t*)_file; H5FD_mpiposix_fapl_t *fa = NULL; int mpi_code; /* MPI return code */ void *ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5FD_mpiposix_fapl_get, NULL) assert(file); assert(H5FD_MPIPOSIX==file->pub.driver_id); if (NULL==(fa=H5MM_calloc(sizeof(H5FD_mpiposix_fapl_t)))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "memory allocation failed") /* Duplicate the communicator. */ if (MPI_SUCCESS != (mpi_code=MPI_Comm_dup(file->comm, &fa->comm))) HMPI_GOTO_ERROR(NULL, "MPI_Comm_dup failed", mpi_code) fa->use_gpfs = file->use_gpfs; /* Set return value */ ret_value=fa; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpiposix_fapl_get() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_fapl_copy * * Purpose: Copies the mpiposix-specific file access properties. * * Return: Success: Ptr to a new property list * * Failure: NULL * * Programmer: Albert Cheng * Apr 24, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static void * H5FD_mpiposix_fapl_copy(const void *_old_fa) { void *ret_value = NULL; const H5FD_mpiposix_fapl_t *old_fa = (const H5FD_mpiposix_fapl_t*)_old_fa; H5FD_mpiposix_fapl_t *new_fa = NULL; int mpi_code; /* MPI return code */ FUNC_ENTER_NOAPI(H5FD_mpiposix_fapl_copy, NULL) if (NULL==(new_fa=H5MM_malloc(sizeof(H5FD_mpiposix_fapl_t)))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "memory allocation failed") /* Copy the general information */ HDmemcpy(new_fa, old_fa, sizeof(H5FD_mpiposix_fapl_t)); /* Duplicate communicator. */ if (MPI_SUCCESS != (mpi_code=MPI_Comm_dup(old_fa->comm, &new_fa->comm))) HMPI_GOTO_ERROR(NULL, "MPI_Comm_dup failed", mpi_code) new_fa->use_gpfs = old_fa->use_gpfs; ret_value = new_fa; done: if (NULL == ret_value){ /* cleanup */ if (new_fa) H5MM_xfree(new_fa); } FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpiposix_fapl_copy() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_fapl_free * * Purpose: Frees the mpiposix-specific file access properties. * * Return: Success: 0 * * Failure: -1 * * Programmer: Albert Cheng * Apr 24, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t H5FD_mpiposix_fapl_free(void *_fa) { herr_t ret_value = SUCCEED; H5FD_mpiposix_fapl_t *fa = (H5FD_mpiposix_fapl_t*)_fa; FUNC_ENTER_NOAPI(H5FD_mpiposix_fapl_free, FAIL) assert(fa); /* Free the internal communicator */ assert(MPI_COMM_NULL!=fa->comm); MPI_Comm_free(&fa->comm); H5MM_xfree(fa); done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpiposix_fapl_free() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_open * * Purpose: Opens a file with name NAME. The FLAGS are a bit field with * purpose similar to the second argument of open(2) and which * are defined in H5Fpublic.h. The file access property list * FAPL_ID contains the properties driver properties and MAXADDR * is the largest address which this file will be expected to * access. This is collective. * * Return: Success: A new file pointer. * Failure: NULL * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * Albert Cheng, 2003-04-24 * Duplicate the communicator so that file is insulated from the * old one. * *------------------------------------------------------------------------- */ static H5FD_t * H5FD_mpiposix_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr) { H5FD_mpiposix_t *file=NULL; /* New MPIPOSIX file struct */ int o_flags; /* Flags for file open call */ int fd=(-1); /* File handle for file opened */ int mpi_rank; /* MPI rank of this process */ int mpi_size; /* Total number of MPI processes */ int mpi_code; /* mpi return code */ const H5FD_mpiposix_fapl_t *fa=NULL; /* MPIPOSIX file access property list information */ H5FD_mpiposix_fapl_t _fa; /* Private copy of default file access property list information */ H5P_genplist_t *plist; /* Property list pointer */ h5_stat_t sb; /* Portable 'stat' struct */ #ifdef _WIN32 HFILE filehandle; struct _BY_HANDLE_FILE_INFORMATION fileinfo; int results; #endif H5FD_t *ret_value=NULL; /* Return value */ MPI_Comm comm_dup=MPI_COMM_NULL; FUNC_ENTER_NOAPI(H5FD_mpiposix_open, NULL) /* Check arguments */ if (!name || !*name) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL, "invalid file name") if (0==maxaddr || HADDR_UNDEF==maxaddr) HGOTO_ERROR(H5E_ARGS, H5E_BADRANGE, NULL, "bogus maxaddr") if (ADDR_OVERFLOW(maxaddr)) HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, NULL, "bogus maxaddr") /* Obtain a pointer to mpiposix-specific file access properties */ if(NULL == (plist = H5P_object_verify(fapl_id,H5P_FILE_ACCESS))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not a file access property list") if (H5P_FILE_ACCESS_DEFAULT==fapl_id || H5FD_MPIPOSIX!=H5P_get_driver(plist)) { _fa.comm = MPI_COMM_SELF; /*default*/ _fa.use_gpfs = FALSE; fa = &_fa; } /* end if */ else { fa = H5P_get_driver_info(plist); assert(fa); } /* end else */ /* Duplicate the communicator for use by this file. */ if (MPI_SUCCESS != (mpi_code=MPI_Comm_dup(fa->comm, &comm_dup))) HMPI_GOTO_ERROR(NULL, "MPI_Comm_dup failed", mpi_code) /* Get the MPI rank of this process and the total number of processes */ if (MPI_SUCCESS != (mpi_code=MPI_Comm_rank (comm_dup, &mpi_rank))) HMPI_GOTO_ERROR(NULL, "MPI_Comm_rank failed", mpi_code) if (MPI_SUCCESS != (mpi_code=MPI_Comm_size (comm_dup, &mpi_size))) HMPI_GOTO_ERROR(NULL, "MPI_Comm_size failed", mpi_code) /* Build the open flags */ o_flags = (H5F_ACC_RDWR & flags) ? O_RDWR : O_RDONLY; /* Only set the creation flag(s) for process 0 */ if(mpi_rank==0) { if (H5F_ACC_TRUNC & flags) o_flags |= O_TRUNC; if (H5F_ACC_CREAT & flags) o_flags |= O_CREAT; if (H5F_ACC_EXCL & flags) o_flags |= O_EXCL; } /* end if */ /* Process 0 opens (or creates) the file while the rest of the * processes wait. Then process 0 signals the other processes and they * open (never create) the file and all processes proceed. */ /* Process 0 opens (or creates) file and broadcasts result to other processes */ if(mpi_rank==0) { /* Open the file */ fd=HDopen(name, o_flags, 0666); } /* end if */ /* Broadcast the results of the open() from process 0 */ /* This is necessary because of the "tentative open" code in H5F_open() * where the file is attempted to be opened with different flags from the * user's, in order to check for the file's existence, etc. Here, process 0 * gets different flags from the other processes (since it is in charge of * creating the file, if necessary) and can fail in situations where the * other process's file opens would succeed, so allow the other processes * to check for that situation and bail out now also. - QAK */ if (MPI_SUCCESS != (mpi_code= MPI_Bcast(&fd, sizeof(int), MPI_BYTE, 0, comm_dup))) HMPI_GOTO_ERROR(NULL, "MPI_Bcast failed", mpi_code) /* If the file open on process 0 failed, bail out on all processes now */ if(fd<0) HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to open file") /* Other processes (non 0) wait for broadcast result from process 0 and then open file */ if(mpi_rank!=0) { /* Open the file */ if ((fd=HDopen(name, o_flags, 0666))<0) HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to open file") } /* end if */ /* Process 0 fstat()s the file and broadcasts the results to the other processes */ if(mpi_rank==0) { /* Get the stat information */ if (HDfstat(fd, &sb)<0) HGOTO_ERROR(H5E_FILE, H5E_BADFILE, NULL, "unable to fstat file") } /* end if */ /* Broadcast the results of the fstat() from process 0 */ if (MPI_SUCCESS != (mpi_code= MPI_Bcast(&sb, sizeof(h5_stat_t), MPI_BYTE, 0, comm_dup))) HMPI_GOTO_ERROR(NULL, "MPI_Bcast failed", mpi_code) #ifdef H5_HAVE_GPFS if (fa->use_gpfs) { /* * Free all byte range tokens. This is a good thing to do if raw data is aligned on 256kB boundaries (a GPFS page is * 256kB). Care should be taken that there aren't too many sub-page writes, or the mmfsd may become overwhelmed. This * should probably eventually be passed down here as a property. The gpfs_fcntl() will most likely fail if `fd' isn't * on a GPFS file system. */ struct { gpfsFcntlHeader_t hdr; gpfsFreeRange_t fr; } hint; HDmemset(&hint, 0, sizeof hint); hint.hdr.totalLength = sizeof hint; hint.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION; hint.fr.structLen = sizeof hint.fr; hint.fr.structType = GPFS_FREE_RANGE; hint.fr.start = 0; hint.fr.length = 0; if (gpfs_fcntl(fd, &hint)<0) HGOTO_ERROR(H5E_FILE, H5E_FCNTL, NULL, "failed to send hints to GPFS") } #endif /* H5_HAVE_GPFS */ /* Build the file struct and initialize it */ if (NULL==(file=H5MM_calloc(sizeof(H5FD_mpiposix_t)))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "memory allocation failed") #ifdef REPORT_IO HDfprintf(stderr, "open: rank=%d name=%s file=0x%08lx\n", mpi_rank, name, (unsigned long)file); #endif /* Set the general file information */ file->fd = fd; file->eof = sb.st_size; /* for _WIN32 support. _WIN32 'stat' does not have st_blksize and st_blksize is only used for the H5_HAVE_GPFS case */ #ifdef H5_HAVE_GPFS file->blksize = sb.st_blksize; #endif /* Set this field in the H5FD_mpiposix_t struct for later use */ file->use_gpfs = fa->use_gpfs; /* Set the MPI information */ file->comm = comm_dup; file->mpi_rank = mpi_rank; file->mpi_size = mpi_size; /* Reset the last file I/O operation */ file->pos = HADDR_UNDEF; file->op = OP_UNKNOWN; /* Set the information for the file's device and inode */ #ifdef _WIN32 filehandle = _get_osfhandle(fd); results = GetFileInformationByHandle((HANDLE)filehandle, &fileinfo); file->fileindexhi = fileinfo.nFileIndexHigh; file->fileindexlo = fileinfo.nFileIndexLow; #else file->device = sb.st_dev; file->inode = sb.st_ino; #endif /* Indicate success */ ret_value=(H5FD_t *)file; done: /* Error cleanup */ if(ret_value==NULL) { /* Close the file if it was left open */ if(fd!=(-1)) HDclose(fd); if (MPI_COMM_NULL != comm_dup) MPI_Comm_free(&comm_dup); } /* end if */ FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpiposix_open() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_close * * Purpose: Closes a file. * * Return: Success: Non-negative * Failure: Negative * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * Albert Cheng, 2003-04-24 * Free the communicator stored. *------------------------------------------------------------------------- */ static herr_t H5FD_mpiposix_close(H5FD_t *_file) { H5FD_mpiposix_t *file = (H5FD_mpiposix_t*)_file; herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_mpiposix_close, FAIL) assert(file); assert(H5FD_MPIPOSIX==file->pub.driver_id); /* Close the unix file */ if (HDclose(file->fd)<0) HGOTO_ERROR(H5E_IO, H5E_CANTCLOSEFILE, FAIL, "unable to close file") /* make sure all processes have closed the file before returning. */ MPI_Barrier(file->comm); /* Clean up other stuff */ MPI_Comm_free(&file->comm); H5MM_xfree(file); done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpiposix_close() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_cmp * * Purpose: Compares two files belonging to this driver using an * arbitrary (but consistent) ordering. * * Return: Success: A value like strcmp() * Failure: never fails (arguments were checked by the * caller). * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * *------------------------------------------------------------------------- */ static int H5FD_mpiposix_cmp(const H5FD_t *_f1, const H5FD_t *_f2) { const H5FD_mpiposix_t *f1 = (const H5FD_mpiposix_t*)_f1; const H5FD_mpiposix_t *f2 = (const H5FD_mpiposix_t*)_f2; int ret_value=0; FUNC_ENTER_NOAPI(H5FD_mpiposix_cmp, H5FD_VFD_DEFAULT) #ifdef _WIN32 if (f1->fileindexhi < f2->fileindexhi) HGOTO_DONE(-1) if (f1->fileindexhi > f2->fileindexhi) HGOTO_DONE(1) if (f1->fileindexlo < f2->fileindexlo) HGOTO_DONE(-1) if (f1->fileindexlo > f2->fileindexlo) HGOTO_DONE(1) #else #ifdef H5_DEV_T_IS_SCALAR if (f1->device < f2->device) HGOTO_DONE(-1) if (f1->device > f2->device) HGOTO_DONE(1) #else /* H5_DEV_T_IS_SCALAR */ /* If dev_t isn't a scalar value on this system, just use memcmp to * determine if the values are the same or not. The actual return value * shouldn't really matter... */ if(HDmemcmp(&(f1->device),&(f2->device),sizeof(dev_t))<0) HGOTO_DONE(-1) if(HDmemcmp(&(f1->device),&(f2->device),sizeof(dev_t))>0) HGOTO_DONE(1) #endif /* H5_DEV_T_IS_SCALAR */ if (f1->inode < f2->inode) HGOTO_DONE(-1) if (f1->inode > f2->inode) HGOTO_DONE(1) #endif done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpiposix_cmp() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_query * * Purpose: Set the flags that this VFL driver is capable of supporting. * (listed in H5FDpublic.h) * * Return: Success: non-negative * Failure: negative * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * * John Mainzer -- 9/21/05 * Modified code to turn off the * H5FD_FEAT_ACCUMULATE_METADATA_WRITE flag. * With the movement of all cache writes to process 0, * this flag has become problematic in PHDF5. * *------------------------------------------------------------------------- */ static herr_t H5FD_mpiposix_query(const H5FD_t UNUSED *_file, unsigned long *flags /* out */) { herr_t ret_value=SUCCEED; FUNC_ENTER_NOAPI(H5FD_mpiposix_query, FAIL) /* Set the VFL feature flags that this driver supports */ if(flags) { *flags=0; *flags|=H5FD_FEAT_AGGREGATE_METADATA; /* OK to aggregate metadata allocations */ *flags|=H5FD_FEAT_AGGREGATE_SMALLDATA; /* OK to aggregate "small" raw data allocations */ } /* end if */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpiposix_query() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_get_eoa * * Purpose: Gets the end-of-address marker for the file. The EOA marker * is the first address past the last byte allocated in the * format address space. * * Return: Success: The end-of-address marker. * Failure: HADDR_UNDEF * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * Raymond Lu * 21 Dec. 2006 * Added the parameter TYPE. It's only used for MULTI driver. * *------------------------------------------------------------------------- */ static haddr_t H5FD_mpiposix_get_eoa(const H5FD_t *_file, H5FD_mem_t UNUSED type) { const H5FD_mpiposix_t *file = (const H5FD_mpiposix_t*)_file; haddr_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5FD_mpiposix_get_eoa, HADDR_UNDEF) assert(file); assert(H5FD_MPIPOSIX==file->pub.driver_id); /* Set return value */ ret_value=file->eoa; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpiposix_get_eoa() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_set_eoa * * Purpose: Set the end-of-address marker for the file. This function is * called shortly after an existing HDF5 file is opened in order * to tell the driver where the end of the HDF5 data is located. * * Return: Success: non-negative * Failure: negative * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * Raymond Lu * 21 Dec. 2006 * Added the parameter TYPE. It's only used for MULTI driver. * *------------------------------------------------------------------------- */ static herr_t H5FD_mpiposix_set_eoa(H5FD_t *_file, H5FD_mem_t UNUSED type, haddr_t addr) { H5FD_mpiposix_t *file = (H5FD_mpiposix_t*)_file; herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_mpiposix_set_eoa, FAIL) assert(file); assert(H5FD_MPIPOSIX==file->pub.driver_id); file->eoa = addr; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpi_posix_set_eoa() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_get_eof * * Purpose: Gets the end-of-file marker for the file. The EOF marker * is the real size of the file. * * The MPIPOSIX driver doesn't bother keeping this field updated * since that's a relatively expensive operation. Fortunately * the library only needs the EOF just after the file is opened * in order to determine whether the file is empty, truncated, * or okay. * * Return: Success: The end-of-address marker. * Failure: HADDR_UNDEF * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * *------------------------------------------------------------------------- */ static haddr_t H5FD_mpiposix_get_eof(const H5FD_t *_file) { const H5FD_mpiposix_t *file = (const H5FD_mpiposix_t*)_file; haddr_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5FD_mpiposix_get_eof, HADDR_UNDEF) assert(file); assert(H5FD_MPIPOSIX==file->pub.driver_id); /* Set return value */ ret_value=MAX(file->eof,file->eoa); done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpiposix_get_eof() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_get_handle * * Purpose: Returns the file handle of MPI-POSIX file driver. * * Returns: Non-negative if succeed or negative if fails. * * Programmer: Raymond Lu * Sept. 16, 2002 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t H5FD_mpiposix_get_handle(H5FD_t *_file, hid_t UNUSED fapl, void** file_handle) { H5FD_mpiposix_t *file = (H5FD_mpiposix_t *)_file; herr_t ret_value = SUCCEED; FUNC_ENTER_NOAPI(H5FD_mpiposix_get_handle, FAIL) if(!file_handle) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "file handle not valid") *file_handle = &(file->fd); done: FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_read * * Purpose: Reads SIZE bytes of data from FILE beginning at address ADDR * into buffer BUF according to data transfer properties in * DXPL_ID using potentially complex file and buffer types to * effect the transfer. * * Reading past the end of the file returns zeros instead of * failing. * * Return: Success: Non-negative. Result is stored in caller-supplied * buffer BUF. * Failure: Negative, Contents of buffer BUF are undefined. * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t H5FD_mpiposix_read(H5FD_t *_file, H5FD_mem_t UNUSED type, hid_t UNUSED dxpl_id, haddr_t addr, size_t size, void *buf/*out*/) { H5FD_mpiposix_t *file = (H5FD_mpiposix_t*)_file; ssize_t nbytes; /* Number of bytes read each I/O call */ herr_t ret_value=SUCCEED; FUNC_ENTER_NOAPI(H5FD_mpiposix_read, FAIL) assert(file); assert(H5FD_MPIPOSIX==file->pub.driver_id); assert(buf); /* Check for overflow conditions */ if (HADDR_UNDEF==addr) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "addr undefined") if (REGION_OVERFLOW(addr, size)) HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow") if (addr+size>file->eoa) HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow") #ifdef REPORT_IO { int commrank; MPI_Comm_rank(MPI_COMM_WORLD, &commrank); HDfprintf(stderr, "read: rank=%d file=0x%08lx type=%d, addr=%a size=%Zu\n", commrank, (unsigned long)file, (int)type, addr, size); } #endif /* Seek to the correct location */ if ((addr!=file->pos || OP_READ!=file->op) && file_seek(file->fd, (file_offset_t)addr, SEEK_SET)<0) HGOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position") /* * Read data, being careful of interrupted system calls, partial results, * and the end of the file. */ while (size>0) { do { nbytes = HDread(file->fd, buf, size); } while (-1==nbytes && EINTR==errno); if (-1==nbytes) HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "file read failed") if (0==nbytes) { /* end of file but not end of format address space */ HDmemset(buf, 0, size); break; } /* end if */ assert(nbytes>=0); assert((size_t)nbytes<=size); size -= nbytes; addr += (haddr_t)nbytes; buf = (char*)buf + nbytes; } /* Update current position */ file->pos = addr; file->op = OP_READ; done: /* Check for error */ if(ret_value<0) { /* Reset last file I/O information */ file->pos = HADDR_UNDEF; file->op = OP_UNKNOWN; } /* end if */ FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpiposix_read() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_write * * Purpose: Writes SIZE bytes of data to FILE beginning at address ADDR * from buffer BUF according to data transfer properties in * DXPL_ID using potentially complex file and buffer types to * effect the transfer. * * Return: Success: non-negative * Failure: negative * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * * Quincey Koziol - 2002/07/18 * Added "block_before_meta_write" dataset transfer flag, which * is set during writes from a metadata cache flush and indicates * that all the processes must sync up before (one of them) * writing metadata. * *------------------------------------------------------------------------- */ static herr_t H5FD_mpiposix_write(H5FD_t *_file, H5FD_mem_t type, hid_t dxpl_id, haddr_t addr, size_t size, const void *buf) { H5FD_mpiposix_t *file = (H5FD_mpiposix_t*)_file; int mpi_code; /* MPI return code */ ssize_t nbytes; /* Number of bytes written each I/O call */ H5P_genplist_t *plist; /* Property list pointer */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_mpiposix_write, FAIL) assert(file); assert(H5FD_MPIPOSIX==file->pub.driver_id); assert(H5I_GENPROP_LST==H5I_get_type(dxpl_id)); assert(TRUE==H5P_isa_class(dxpl_id,H5P_DATASET_XFER)); assert(buf); /* Check for overflow conditions */ if (HADDR_UNDEF==addr) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "addr undefined") if (REGION_OVERFLOW(addr, size)) HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow") if (addr+size>file->eoa) HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow") /* Obtain the data transfer properties */ if(NULL == (plist = H5I_object(dxpl_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list") /* Metadata specific actions */ /* All metadata is now written from process 0 -- thus this function * needs to be re-written to reflect this. For now I have simply * commented out the code that attempts to synchronize metadata * writes between processes, but we should really just flag an error * whenever any process other than process 0 attempts to write * metadata. * -- JRM 9/1/05 */ if(type!=H5FD_MEM_DRAW) { unsigned block_before_meta_write=0; /* Whether to block before a metadata write */ /* Check if we need to syncronize all processes before attempting metadata write * (Prevents race condition where the process writing the metadata goes ahead * and writes the metadata to the file before all the processes have * read the data, "transmitting" data from the "future" to the reading * process. -QAK ) * * The only time we don't want to block before a metadata write is when * we are flushing out a bunch of metadata. Then, we block before the * first write and don't block for further writes in the sequence. */ if(H5P_exist_plist(plist,H5AC_BLOCK_BEFORE_META_WRITE_NAME)>0) if(H5P_get(plist,H5AC_BLOCK_BEFORE_META_WRITE_NAME,&block_before_meta_write)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get H5AC property") #if 0 /* JRM */ if(block_before_meta_write) if (MPI_SUCCESS!= (mpi_code=MPI_Barrier(file->comm))) HMPI_GOTO_ERROR(FAIL, "MPI_Barrier failed", mpi_code) #endif /* JRM */ /* Only one process will do the actual write if all procs in comm write same metadata */ if (file->mpi_rank != H5_PAR_META_WRITE) HGOTO_DONE(SUCCEED) /* skip the actual write */ } /* end if */ #ifdef REPORT_IO { int commrank; MPI_Comm_rank(MPI_COMM_WORLD, &commrank); HDfprintf(stderr, "write: rank=%d file=0x%08lx type=%d, addr=%a size=%Zu %s\n", commrank, (unsigned long)file, (int)type, addr, size, 0==file->naccess?"(FIRST ACCESS)":""); } #endif if (0==file->naccess++) { /* First write access to this file */ #ifdef H5_HAVE_GPFS if (file->use_gpfs) { struct { gpfsFcntlHeader_t hdr; gpfsMultipleAccessRange_t mar; } hint; HDmemset(&hint, 0, sizeof hint); hint.hdr.totalLength = sizeof hint; hint.hdr.fcntlVersion = GPFS_FCNTL_CURRENT_VERSION; hint.mar.structLen = sizeof hint.mar; hint.mar.structType = GPFS_MULTIPLE_ACCESS_RANGE; hint.mar.accRangeCnt = 1; hint.mar.accRangeArray[0].blockNumber = addr / file->blksize; hint.mar.accRangeArray[0].start = addr % file->blksize; hint.mar.accRangeArray[0].length = MIN(file->blksize-hint.mar.accRangeArray[0].start, size); hint.mar.accRangeArray[0].isWrite = 1; if (gpfs_fcntl(file->fd, &hint)<0) HGOTO_ERROR(H5E_FILE, H5E_FCNTL, NULL, "failed to send hints to GPFS") } #endif /* H5_HAVE_GPFS */ } /* Seek to the correct location */ if ((addr!=file->pos || OP_WRITE!=file->op) && file_seek(file->fd, (file_offset_t)addr, SEEK_SET)<0) HGOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position") /* * Write the data, being careful of interrupted system calls and partial * results */ while (size>0) { do { nbytes = HDwrite(file->fd, buf, size); } while (-1==nbytes && EINTR==errno); if (-1==nbytes) HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "file write failed") assert(nbytes>0); assert((size_t)nbytes<=size); size -= nbytes; addr += (haddr_t)nbytes; buf = (const char*)buf + nbytes; } /* end while */ /* Update current last file I/O information */ file->pos = addr; file->op = OP_WRITE; done: /* Check for error */ if(ret_value<0) { /* Reset last file I/O information */ file->pos = HADDR_UNDEF; file->op = OP_UNKNOWN; } /* end if */ #if 0 /* JRM */ /* Since metadata writes are now done by process 0 only, this broadcast * is no longer needed. I leave it in and commented out to remind us * that we need to re-work this function to reflect this reallity. * * -- JRM 9/1/05 */ /* Guard against getting into metadata broadcast in failure cases */ else { /* when only one process writes, need to broadcast the ret_value to other processes */ if (type!=H5FD_MEM_DRAW) { if (MPI_SUCCESS != (mpi_code= MPI_Bcast(&ret_value, sizeof(ret_value), MPI_BYTE, H5_PAR_META_WRITE, file->comm))) HMPI_GOTO_ERROR(FAIL, "MPI_Bcast failed", mpi_code) } /* end if */ } /* end else */ #endif /* JRM */ FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpiposix_write() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_flush * * Purpose: Makes sure that all data is on disk. This is collective. * * Return: Success: Non-negative * Failure: Negative * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t H5FD_mpiposix_flush(H5FD_t *_file, hid_t UNUSED dxpl_id, unsigned UNUSED closing) { H5FD_mpiposix_t *file = (H5FD_mpiposix_t*)_file; #ifdef _WIN32 HFILE filehandle; /* Windows file handle */ LARGE_INTEGER li; /* 64-bit integer for SetFilePointer() call */ #endif /* _WIN32 */ int mpi_code; /* MPI return code */ herr_t ret_value=SUCCEED; FUNC_ENTER_NOAPI(H5FD_mpiposix_flush, FAIL) assert(file); assert(H5FD_MPIPOSIX==file->pub.driver_id); /* Extend the file to make sure it's large enough */ if(file->eoa>file->last_eoa) { /* Use the round-robin process to truncate (extend) the file */ if(file->mpi_rank == H5_PAR_META_WRITE) { #ifdef _WIN32 /* Map the posix file handle to a Windows file handle */ filehandle = _get_osfhandle(file->fd); /* Translate 64-bit integers into form Windows wants */ /* [This algorithm is from the Windows documentation for SetFilePointer()] */ li.QuadPart = file->eoa; SetFilePointer((HANDLE)filehandle,li.LowPart,&li.HighPart,FILE_BEGIN); if(SetEndOfFile((HANDLE)filehandle)==0) HGOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to extend file properly") #else /* _WIN32 */ if(-1==file_truncate(file->fd, (file_offset_t)file->eoa)) HGOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to extend file properly") #endif /* _WIN32 */ } /* end if */ /* Don't let any proc return until all have extended the file. * (Prevents race condition where some processes go ahead and write * more data to the file before all the processes have finished making * it the shorter length, potentially truncating the file and dropping * the new data written) */ if (MPI_SUCCESS!= (mpi_code=MPI_Barrier(file->comm))) HMPI_GOTO_ERROR(FAIL, "MPI_Barrier failed", mpi_code) /* Update the 'last' eoa and eof values */ file->last_eoa=file->eoa; file->eof = file->eoa; /* Reset last file I/O information */ file->pos = HADDR_UNDEF; file->op = OP_UNKNOWN; } /* end if */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpiposix_flush() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_mpi_rank * * Purpose: Returns the MPI rank for a process * * Return: Success: non-negative * Failure: negative * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * *------------------------------------------------------------------------- */ static int H5FD_mpiposix_mpi_rank(const H5FD_t *_file) { const H5FD_mpiposix_t *file = (const H5FD_mpiposix_t*)_file; int ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5FD_mpiposix_mpi_rank, FAIL) assert(file); assert(H5FD_MPIPOSIX==file->pub.driver_id); /* Set return value */ ret_value=file->mpi_rank; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpiposix_mpi_rank() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_mpi_size * * Purpose: Returns the number of MPI processes * * Return: Success: non-negative * Failure: negative * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * *------------------------------------------------------------------------- */ static int H5FD_mpiposix_mpi_size(const H5FD_t *_file) { const H5FD_mpiposix_t *file = (const H5FD_mpiposix_t*)_file; int ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5FD_mpiposix_mpi_size, FAIL) assert(file); assert(H5FD_MPIPOSIX==file->pub.driver_id); /* Set return value */ ret_value=file->mpi_size; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpiposix_mpi_size() */ /*------------------------------------------------------------------------- * Function: H5FD_mpiposix_communicator * * Purpose: Returns the MPI communicator for the file. * * Return: Success: The communicator * * Failure: NULL * * Programmer: Quincey Koziol * Thursday, July 11, 2002 * * Modifications: * *------------------------------------------------------------------------- */ static MPI_Comm H5FD_mpiposix_communicator(const H5FD_t *_file) { const H5FD_mpiposix_t *file = (const H5FD_mpiposix_t*)_file; MPI_Comm ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5FD_mpiposix_communicator, MPI_COMM_NULL) assert(file); assert(H5FD_MPIPOSIX==file->pub.driver_id); /* Set return value */ ret_value=file->comm; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_mpi_posix_communicator() */ #endif /*H5_HAVE_PARALLEL*/