/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Programmer: Robb Matzke * Thursday, July 29, 1999 * * Purpose: The POSIX unbuffered file driver using only the HDF5 public * API and with a few optimizations: the lseek() call is made * only when the current file position is unknown or needs to be * changed based on previous I/O through this driver (don't mix * I/O from this driver with I/O from other parts of the * application to the same file). */ /* Interface initialization */ #define H5_INTERFACE_INIT_FUNC H5FD_sec2_init_interface #include "H5private.h" /* Generic Functions */ #include "H5Eprivate.h" /* Error handling */ #include "H5Fprivate.h" /* File access */ #include "H5FDprivate.h" /* File drivers */ #include "H5FDsec2.h" /* Sec2 file driver */ #include "H5FLprivate.h" /* Free Lists */ #include "H5Iprivate.h" /* IDs */ #include "H5MMprivate.h" /* Memory management */ #include "H5Pprivate.h" /* Property lists */ /* The driver identification number, initialized at runtime */ static hid_t H5FD_SEC2_g = 0; /* File operations */ typedef enum { OP_UNKNOWN = 0, /* Unknown last file operation */ OP_READ = 1, /* Last file I/O operation was a read */ OP_WRITE = 2 /* Last file I/O operation was a write */ } H5FD_sec2_file_op_t; #define H5FD_SEC2_MAX_FILENAME_LEN 1024 /* * The description of a file belonging to this driver. The `eoa' and `eof' * determine the amount of hdf5 address space in use and the high-water mark * of the file (the current size of the underlying Unix file). The `pos' * value is used to eliminate file position updates when they would be a * no-op. Unfortunately we've found systems that use separate file position * indicators for reading and writing so the lseek can only be eliminated if * the current operation is the same as the previous operation. When opening * a file the `eof' will be set to the current file size, `eoa' will be set * to zero, `pos' will be set to H5F_ADDR_UNDEF (as it is when an error * occurs), and `op' will be set to H5F_OP_UNKNOWN. */ typedef struct H5FD_sec2_t { H5FD_t pub; /*public stuff, must be first */ int fd; /*the unix file */ haddr_t eoa; /*end of allocated region */ haddr_t eof; /*end of file; current file size*/ haddr_t pos; /*current file I/O position */ H5FD_sec2_file_op_t op; /*last operation */ char filename[H5FD_SEC2_MAX_FILENAME_LEN]; /* Copy of file name from open operation */ #ifndef _WIN32 /* * On most systems the combination of device and i-node number uniquely * identify a file. */ dev_t device; /*file device number */ #ifdef H5_VMS ino_t inode[3]; /*file i-node number */ #else ino_t inode; /*file i-node number */ #endif /*H5_VMS*/ #else /* * On _WIN32 the low-order word of a unique identifier associated with the * file and the volume serial number uniquely identify a file. This number * (which, both? -rpm) may change when the system is restarted or when the * file is opened. After a process opens a file, the identifier is * constant until the file is closed. An application can use this * identifier and the volume serial number to determine whether two * handles refer to the same file. */ DWORD fileindexlo; DWORD fileindexhi; #endif /* Information from properties set by 'h5repart' tool */ hbool_t fam_to_sec2; /* Whether to eliminate the family driver info * and convert this file to a single file */ } H5FD_sec2_t; /* * This driver supports systems that have the lseek64() function by defining * some macros here so we don't have to have conditional compilations later * throughout the code. * * HDoff_t: The datatype for file offsets, the second argument of * the lseek() or lseek64() call. * */ /* * These macros check for overflow of various quantities. These macros * assume that HDoff_t is signed and haddr_t and size_t are unsigned. * * ADDR_OVERFLOW: Checks whether a file address of type `haddr_t' * is too large to be represented by the second argument * of the file seek function. * * SIZE_OVERFLOW: Checks whether a buffer size of type `hsize_t' is too * large to be represented by the `size_t' type. * * REGION_OVERFLOW: Checks whether an address and size pair describe data * which can be addressed entirely by the second * argument of the file seek function. */ #define MAXADDR (((haddr_t)1<<(8*sizeof(HDoff_t)-1))-1) #define ADDR_OVERFLOW(A) (HADDR_UNDEF==(A) || \ ((A) & ~(haddr_t)MAXADDR)) #define SIZE_OVERFLOW(Z) ((Z) & ~(hsize_t)MAXADDR) #define REGION_OVERFLOW(A,Z) (ADDR_OVERFLOW(A) || SIZE_OVERFLOW(Z) || \ HADDR_UNDEF==(A)+(Z) || \ (HDoff_t)((A)+(Z))<(HDoff_t)(A)) /* Prototypes */ static H5FD_t *H5FD_sec2_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr); static herr_t H5FD_sec2_close(H5FD_t *_file); static int H5FD_sec2_cmp(const H5FD_t *_f1, const H5FD_t *_f2); static herr_t H5FD_sec2_query(const H5FD_t *_f1, unsigned long *flags); static haddr_t H5FD_sec2_get_eoa(const H5FD_t *_file, H5FD_mem_t type); static herr_t H5FD_sec2_set_eoa(H5FD_t *_file, H5FD_mem_t type, haddr_t addr); static haddr_t H5FD_sec2_get_eof(const H5FD_t *_file); static herr_t H5FD_sec2_get_handle(H5FD_t *_file, hid_t fapl, void** file_handle); static herr_t H5FD_sec2_read(H5FD_t *_file, H5FD_mem_t type, hid_t fapl_id, haddr_t addr, size_t size, void *buf); static herr_t H5FD_sec2_write(H5FD_t *_file, H5FD_mem_t type, hid_t fapl_id, haddr_t addr, size_t size, const void *buf); static herr_t H5FD_sec2_truncate(H5FD_t *_file, hid_t dxpl_id, hbool_t closing); static const H5FD_class_t H5FD_sec2_g = { "sec2", /*name */ MAXADDR, /*maxaddr */ H5F_CLOSE_WEAK, /* fc_degree */ NULL, /*sb_size */ NULL, /*sb_encode */ NULL, /*sb_decode */ 0, /*fapl_size */ NULL, /*fapl_get */ NULL, /*fapl_copy */ NULL, /*fapl_free */ 0, /*dxpl_size */ NULL, /*dxpl_copy */ NULL, /*dxpl_free */ H5FD_sec2_open, /*open */ H5FD_sec2_close, /*close */ H5FD_sec2_cmp, /*cmp */ H5FD_sec2_query, /*query */ NULL, /*get_type_map */ NULL, /*alloc */ NULL, /*free */ H5FD_sec2_get_eoa, /*get_eoa */ H5FD_sec2_set_eoa, /*set_eoa */ H5FD_sec2_get_eof, /*get_eof */ H5FD_sec2_get_handle, /*get_handle */ H5FD_sec2_read, /*read */ H5FD_sec2_write, /*write */ NULL, /*flush */ H5FD_sec2_truncate, /*truncate */ NULL, /*lock */ NULL, /*unlock */ H5FD_FLMAP_SINGLE /*fl_map */ }; /* Declare a free list to manage the H5FD_sec2_t struct */ H5FL_DEFINE_STATIC(H5FD_sec2_t); /*-------------------------------------------------------------------------- NAME H5FD_sec2_init_interface -- Initialize interface-specific information USAGE herr_t H5FD_sec2_init_interface() RETURNS Non-negative on success/Negative on failure DESCRIPTION Initializes any interface-specific data or routines. (Just calls H5FD_sec2_init currently). --------------------------------------------------------------------------*/ static herr_t H5FD_sec2_init_interface(void) { FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5FD_sec2_init_interface) FUNC_LEAVE_NOAPI(H5FD_sec2_init()) } /* H5FD_sec2_init_interface() */ /*------------------------------------------------------------------------- * Function: H5FD_sec2_init * * Purpose: Initialize this driver by registering the driver with the * library. * * Return: Success: The driver ID for the sec2 driver. * Failure: Negative. * * Programmer: Robb Matzke * Thursday, July 29, 1999 * *------------------------------------------------------------------------- */ hid_t H5FD_sec2_init(void) { hid_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5FD_sec2_init, FAIL) if(H5I_VFL != H5I_get_type(H5FD_SEC2_g)) H5FD_SEC2_g = H5FD_register(&H5FD_sec2_g, sizeof(H5FD_class_t), FALSE); /* Set return value */ ret_value = H5FD_SEC2_g; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_sec2_init() */ /*--------------------------------------------------------------------------- * Function: H5FD_sec2_term * * Purpose: Shut down the VFD * * Return: * * Programmer: Quincey Koziol * Friday, Jan 30, 2004 * *--------------------------------------------------------------------------- */ void H5FD_sec2_term(void) { FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5FD_sec2_term) /* Reset VFL ID */ H5FD_SEC2_g = 0; FUNC_LEAVE_NOAPI_VOID } /* end H5FD_sec2_term() */ /*------------------------------------------------------------------------- * Function: H5Pset_fapl_sec2 * * Purpose: Modify the file access property list to use the H5FD_SEC2 * driver defined in this source file. There are no driver * specific properties. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Thursday, February 19, 1998 * *------------------------------------------------------------------------- */ herr_t H5Pset_fapl_sec2(hid_t fapl_id) { H5P_genplist_t *plist; /* Property list pointer */ herr_t ret_value; FUNC_ENTER_API(H5Pset_fapl_sec2, FAIL) H5TRACE1("e", "i", fapl_id); if(NULL == (plist = H5P_object_verify(fapl_id,H5P_FILE_ACCESS))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list") ret_value= H5P_set_driver(plist, H5FD_SEC2, NULL); done: FUNC_LEAVE_API(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD_sec2_open * * Purpose: Create and/or opens a Unix file as an HDF5 file. * * Return: Success: A pointer to a new file data structure. The * public fields will be initialized by the * caller, which is always H5FD_open(). * * Failure: NULL * * Programmer: Robb Matzke * Thursday, July 29, 1999 * * Modifications: * *------------------------------------------------------------------------- */ static H5FD_t * H5FD_sec2_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr) { H5FD_sec2_t *file = NULL; /* sec2 VFD info */ int fd = (-1); /* File descriptor */ int o_flags; /* Flags for open() call */ #ifdef _WIN32 HFILE filehandle; struct _BY_HANDLE_FILE_INFORMATION fileinfo; #endif h5_stat_t sb; H5FD_t *ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5FD_sec2_open, NULL) /* Sanity check on file offsets */ HDassert(sizeof(HDoff_t) >= sizeof(size_t)); /* Check arguments */ if(!name || !*name) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL, "invalid file name") if(0 == maxaddr || HADDR_UNDEF == maxaddr) HGOTO_ERROR(H5E_ARGS, H5E_BADRANGE, NULL, "bogus maxaddr") if(ADDR_OVERFLOW(maxaddr)) HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, NULL, "bogus maxaddr") /* Build the open flags */ o_flags = (H5F_ACC_RDWR & flags) ? O_RDWR : O_RDONLY; if(H5F_ACC_TRUNC & flags) o_flags |= O_TRUNC; if(H5F_ACC_CREAT & flags) o_flags |= O_CREAT; if(H5F_ACC_EXCL & flags) o_flags |= O_EXCL; /* Open the file */ if((fd = HDopen(name, o_flags, 0666)) < 0) { int myerrno = errno; HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to open file: name = '%s', errno = %d, error message = '%s', flags = %x, o_flags = %x", name, myerrno, HDstrerror(myerrno), flags, (unsigned)o_flags); } /* end if */ if(HDfstat(fd, &sb) < 0) HSYS_GOTO_ERROR(H5E_FILE, H5E_BADFILE, NULL, "unable to fstat file") /* Create the new file struct */ if(NULL == (file = H5FL_CALLOC(H5FD_sec2_t))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "unable to allocate file struct") file->fd = fd; H5_ASSIGN_OVERFLOW(file->eof, sb.st_size, h5_stat_size_t, haddr_t); file->pos = HADDR_UNDEF; file->op = OP_UNKNOWN; #ifdef _WIN32 filehandle = _get_osfhandle(fd); (void)GetFileInformationByHandle((HANDLE)filehandle, &fileinfo); file->fileindexhi = fileinfo.nFileIndexHigh; file->fileindexlo = fileinfo.nFileIndexLow; #else /* _WIN32 */ file->device = sb.st_dev; #ifdef H5_VMS file->inode[0] = sb.st_ino[0]; file->inode[1] = sb.st_ino[1]; file->inode[2] = sb.st_ino[2]; #else file->inode = sb.st_ino; #endif /*H5_VMS*/ #endif /* _WIN32 */ /* Retain a copy of the name used to open the file, for possible error reporting */ HDstrncpy(file->filename, name, sizeof(file->filename)); file->filename[sizeof(file->filename) - 1] = '\0'; /* Check for non-default FAPL */ if(H5P_FILE_ACCESS_DEFAULT != fapl_id) { H5P_genplist_t *plist; /* Property list pointer */ /* Get the FAPL */ if(NULL == (plist = (H5P_genplist_t *)H5I_object(fapl_id))) HGOTO_ERROR(H5E_VFL, H5E_BADTYPE, NULL, "not a file access property list") /* This step is for h5repart tool only. If user wants to change file driver from * family to sec2 while using h5repart, this private property should be set so that * in the later step, the library can ignore the family driver information saved * in the superblock. */ if(H5P_exist_plist(plist, H5F_ACS_FAMILY_TO_SEC2_NAME) > 0) if(H5P_get(plist, H5F_ACS_FAMILY_TO_SEC2_NAME, &file->fam_to_sec2) < 0) HGOTO_ERROR(H5E_VFL, H5E_CANTGET, NULL, "can't get property of changing family to sec2") } /* end if */ /* Set return value */ ret_value = (H5FD_t*)file; done: if(NULL == ret_value) { if(fd >= 0) HDclose(fd); if(file) file = H5FL_FREE(H5FD_sec2_t, file); } /* end if */ FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_sec2_open() */ /*------------------------------------------------------------------------- * Function: H5FD_sec2_close * * Purpose: Closes a Unix file. * * Return: Success: 0 * * Failure: -1, file not closed. * * Programmer: Robb Matzke * Thursday, July 29, 1999 * *------------------------------------------------------------------------- */ static herr_t H5FD_sec2_close(H5FD_t *_file) { H5FD_sec2_t *file = (H5FD_sec2_t*)_file; herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_sec2_close, FAIL) /* Sanity check */ HDassert(file); /* Close the underlying file */ if(HDclose(file->fd) < 0) HSYS_GOTO_ERROR(H5E_IO, H5E_CANTCLOSEFILE, FAIL, "unable to close file") /* Release the file info */ file = H5FL_FREE(H5FD_sec2_t, file); done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_sec2_close() */ /*------------------------------------------------------------------------- * Function: H5FD_sec2_cmp * * Purpose: Compares two files belonging to this driver using an * arbitrary (but consistent) ordering. * * Return: Success: A value like strcmp() * * Failure: never fails (arguments were checked by the * caller). * * Programmer: Robb Matzke * Thursday, July 29, 1999 * * Modifications: * *------------------------------------------------------------------------- */ static int H5FD_sec2_cmp(const H5FD_t *_f1, const H5FD_t *_f2) { const H5FD_sec2_t *f1 = (const H5FD_sec2_t*)_f1; const H5FD_sec2_t *f2 = (const H5FD_sec2_t*)_f2; int ret_value=0; FUNC_ENTER_NOAPI(H5FD_sec2_cmp, H5FD_VFD_DEFAULT) #ifdef _WIN32 if (f1->fileindexhi < f2->fileindexhi) HGOTO_DONE(-1) if (f1->fileindexhi > f2->fileindexhi) HGOTO_DONE(1) if (f1->fileindexlo < f2->fileindexlo) HGOTO_DONE(-1) if (f1->fileindexlo > f2->fileindexlo) HGOTO_DONE(1) #else #ifdef H5_DEV_T_IS_SCALAR if (f1->device < f2->device) HGOTO_DONE(-1) if (f1->device > f2->device) HGOTO_DONE(1) #else /* H5_DEV_T_IS_SCALAR */ /* If dev_t isn't a scalar value on this system, just use memcmp to * determine if the values are the same or not. The actual return value * shouldn't really matter... */ if(HDmemcmp(&(f1->device),&(f2->device),sizeof(dev_t))<0) HGOTO_DONE(-1) if(HDmemcmp(&(f1->device),&(f2->device),sizeof(dev_t))>0) HGOTO_DONE(1) #endif /* H5_DEV_T_IS_SCALAR */ #ifndef H5_VMS if (f1->inode < f2->inode) HGOTO_DONE(-1) if (f1->inode > f2->inode) HGOTO_DONE(1) #else if(HDmemcmp(&(f1->inode),&(f2->inode),3*sizeof(ino_t))<0) HGOTO_DONE(-1) if(HDmemcmp(&(f1->inode),&(f2->inode),3*sizeof(ino_t))>0) HGOTO_DONE(1) #endif /*H5_VMS*/ #endif done: FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD_sec2_query * * Purpose: Set the flags that this VFL driver is capable of supporting. * (listed in H5FDpublic.h) * * Return: Success: non-negative * Failure: negative * * Programmer: Quincey Koziol * Friday, August 25, 2000 * *------------------------------------------------------------------------- */ static herr_t H5FD_sec2_query(const H5FD_t *_file, unsigned long *flags /* out */) { const H5FD_sec2_t *file = (const H5FD_sec2_t*)_file; /* sec2 VFD info */ FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5FD_sec2_query) /* Set the VFL feature flags that this driver supports */ if(flags) { *flags = 0; *flags |= H5FD_FEAT_AGGREGATE_METADATA; /* OK to aggregate metadata allocations */ *flags |= H5FD_FEAT_ACCUMULATE_METADATA; /* OK to accumulate metadata for faster writes */ *flags |= H5FD_FEAT_DATA_SIEVE; /* OK to perform data sieving for faster raw data reads & writes */ *flags |= H5FD_FEAT_AGGREGATE_SMALLDATA; /* OK to aggregate "small" raw data allocations */ *flags |= H5FD_FEAT_POSIX_COMPAT_HANDLE; /* VFD handle is POSIX I/O call compatible */ /* Check for flags that are set by h5repart */ if(file->fam_to_sec2) *flags |= H5FD_FEAT_IGNORE_DRVRINFO; /* Ignore the driver info when file is opened (which eliminates it) */ } /* end if */ FUNC_LEAVE_NOAPI(SUCCEED) } /* end H5FD_sec2_query() */ /*------------------------------------------------------------------------- * Function: H5FD_sec2_get_eoa * * Purpose: Gets the end-of-address marker for the file. The EOA marker * is the first address past the last byte allocated in the * format address space. * * Return: Success: The end-of-address marker. * * Failure: HADDR_UNDEF * * Programmer: Robb Matzke * Monday, August 2, 1999 * * Modifications: * Raymond Lu * 21 Dec. 2006 * Added the parameter TYPE. It's only used for MULTI driver. * *------------------------------------------------------------------------- */ static haddr_t H5FD_sec2_get_eoa(const H5FD_t *_file, H5FD_mem_t UNUSED type) { const H5FD_sec2_t *file = (const H5FD_sec2_t*)_file; haddr_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5FD_sec2_get_eoa, HADDR_UNDEF) /* Set return value */ ret_value = file->eoa; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_sec2_get_eoa() */ /*------------------------------------------------------------------------- * Function: H5FD_sec2_set_eoa * * Purpose: Set the end-of-address marker for the file. This function is * called shortly after an existing HDF5 file is opened in order * to tell the driver where the end of the HDF5 data is located. * * Return: Success: 0 * * Failure: -1 * * Programmer: Robb Matzke * Thursday, July 29, 1999 * * Modifications: * Raymond Lu * 21 Dec. 2006 * Added the parameter TYPE. It's only used for MULTI driver. * *------------------------------------------------------------------------- */ static herr_t H5FD_sec2_set_eoa(H5FD_t *_file, H5FD_mem_t UNUSED type, haddr_t addr) { H5FD_sec2_t *file = (H5FD_sec2_t*)_file; herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_sec2_set_eoa, FAIL) file->eoa = addr; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_sec2_set_eoa() */ /*------------------------------------------------------------------------- * Function: H5FD_sec2_get_eof * * Purpose: Returns the end-of-file marker, which is the greater of * either the Unix end-of-file or the HDF5 end-of-address * markers. * * Return: Success: End of file address, the first address past * the end of the "file", either the Unix file * or the HDF5 file. * * Failure: HADDR_UNDEF * * Programmer: Robb Matzke * Thursday, July 29, 1999 * * Modifications: * *------------------------------------------------------------------------- */ static haddr_t H5FD_sec2_get_eof(const H5FD_t *_file) { const H5FD_sec2_t *file = (const H5FD_sec2_t*)_file; haddr_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5FD_sec2_get_eof, HADDR_UNDEF) /* Set return value */ ret_value=MAX(file->eof, file->eoa); done: FUNC_LEAVE_NOAPI(ret_value) } /*------------------------------------------------------------------------- * Function: H5FD_sec2_get_handle * * Purpose: Returns the file handle of sec2 file driver. * * Returns: Non-negative if succeed or negative if fails. * * Programmer: Raymond Lu * Sept. 16, 2002 * *------------------------------------------------------------------------- */ /* ARGSUSED */ static herr_t H5FD_sec2_get_handle(H5FD_t *_file, hid_t UNUSED fapl, void **file_handle) { H5FD_sec2_t *file = (H5FD_sec2_t *)_file; herr_t ret_value = SUCCEED; FUNC_ENTER_NOAPI(H5FD_sec2_get_handle, FAIL) if(!file_handle) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "file handle not valid") *file_handle = &(file->fd); done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_sec2_get_handle() */ /*------------------------------------------------------------------------- * Function: H5FD_sec2_read * * Purpose: Reads SIZE bytes of data from FILE beginning at address ADDR * into buffer BUF according to data transfer properties in * DXPL_ID. * * Return: Success: Zero. Result is stored in caller-supplied * buffer BUF. * Failure: -1, Contents of buffer BUF are undefined. * * Programmer: Robb Matzke * Thursday, July 29, 1999 * *------------------------------------------------------------------------- */ /* ARGSUSED */ static herr_t H5FD_sec2_read(H5FD_t *_file, H5FD_mem_t UNUSED type, hid_t UNUSED dxpl_id, haddr_t addr, size_t size, void *buf/*out*/) { H5FD_sec2_t *file = (H5FD_sec2_t*)_file; ssize_t nbytes; herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_sec2_read, FAIL) HDassert(file && file->pub.cls); HDassert(buf); /* Check for overflow conditions */ if(!H5F_addr_defined(addr)) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "addr undefined, addr = %llu", (unsigned long long)addr) if(REGION_OVERFLOW(addr, size)) HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow, addr = %llu", (unsigned long long)addr) if((addr + size) > file->eoa) HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow, addr = %llu", (unsigned long long)addr) /* Seek to the correct location */ if((addr != file->pos || OP_READ != file->op) && HDlseek(file->fd, (HDoff_t)addr, SEEK_SET) < 0) HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position") /* * Read data, being careful of interrupted system calls, partial results, * and the end of the file. */ while(size > 0) { do { nbytes = HDread(file->fd, buf, size); } while(-1 == nbytes && EINTR == errno); if(-1 == nbytes) { /* error */ int myerrno = errno; time_t mytime = HDtime(NULL); HDoff_t myoffset = HDlseek(file->fd, (HDoff_t)0, SEEK_CUR); HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "file read failed: time = %s, filename = '%s', file descriptor = %d, errno = %d, error message = '%s', buf = %p, size = %lu, offset = %llu", HDctime(&mytime), file->filename, file->fd, myerrno, HDstrerror(myerrno), buf, (unsigned long)size, (unsigned long long)myoffset); } /* end if */ if(0 == nbytes) { /* end of file but not end of format address space */ HDmemset(buf, 0, size); break; } /* end if */ HDassert(nbytes >= 0); HDassert((size_t)nbytes <= size); H5_CHECK_OVERFLOW(nbytes, ssize_t, size_t); size -= (size_t)nbytes; H5_CHECK_OVERFLOW(nbytes, ssize_t, haddr_t); addr += (haddr_t)nbytes; buf = (char *)buf + nbytes; } /* end while */ /* Update current position */ file->pos = addr; file->op = OP_READ; done: if(ret_value < 0) { /* Reset last file I/O information */ file->pos = HADDR_UNDEF; file->op = OP_UNKNOWN; } /* end if */ FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_sec2_read() */ /*------------------------------------------------------------------------- * Function: H5FD_sec2_write * * Purpose: Writes SIZE bytes of data to FILE beginning at address ADDR * from buffer BUF according to data transfer properties in * DXPL_ID. * * Return: Success: Zero * Failure: -1 * * Programmer: Robb Matzke * Thursday, July 29, 1999 * *------------------------------------------------------------------------- */ /* ARGSUSED */ static herr_t H5FD_sec2_write(H5FD_t *_file, H5FD_mem_t UNUSED type, hid_t UNUSED dxpl_id, haddr_t addr, size_t size, const void *buf) { H5FD_sec2_t *file = (H5FD_sec2_t*)_file; ssize_t nbytes; herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_sec2_write, FAIL) HDassert(file && file->pub.cls); HDassert(buf); /* Check for overflow conditions */ if(!H5F_addr_defined(addr)) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "addr undefined, addr = %llu", (unsigned long long)addr) if(REGION_OVERFLOW(addr, size)) HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow, addr = %llu, size = %llu", (unsigned long long)addr, (unsigned long long)size) if((addr + size) > file->eoa) HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow, addr = %llu, size = %llu, eoa = %llu", (unsigned long long)addr, (unsigned long long)size, (unsigned long long)file->eoa) /* Seek to the correct location */ if((addr != file->pos || OP_WRITE != file->op) && HDlseek(file->fd, (HDoff_t)addr, SEEK_SET) < 0) HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position") /* * Write the data, being careful of interrupted system calls and partial * results */ while(size > 0) { do { nbytes = HDwrite(file->fd, buf, size); } while(-1 == nbytes && EINTR == errno); if(-1 == nbytes) { /* error */ int myerrno = errno; time_t mytime = HDtime(NULL); HDoff_t myoffset = HDlseek(file->fd, (HDoff_t)0, SEEK_CUR); HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "file write failed: time = %s, filename = '%s', file descriptor = %d, errno = %d, error message = '%s', buf = %p, size = %lu, offset = %llu", HDctime(&mytime), file->filename, file->fd, myerrno, HDstrerror(myerrno), buf, (unsigned long)size, (unsigned long long)myoffset); } /* end if */ HDassert(nbytes > 0); HDassert((size_t)nbytes <= size); H5_CHECK_OVERFLOW(nbytes, ssize_t, size_t); size -= (size_t)nbytes; H5_CHECK_OVERFLOW(nbytes, ssize_t, haddr_t); addr += (haddr_t)nbytes; buf = (const char *)buf + nbytes; } /* end while */ /* Update current position and eof */ file->pos = addr; file->op = OP_WRITE; if(file->pos > file->eof) file->eof = file->pos; done: if(ret_value < 0) { /* Reset last file I/O information */ file->pos = HADDR_UNDEF; file->op = OP_UNKNOWN; } /* end if */ FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_sec2_write() */ /*------------------------------------------------------------------------- * Function: H5FD_sec2_truncate * * Purpose: Makes sure that the true file size is the same (or larger) * than the end-of-address. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Wednesday, August 4, 1999 * *------------------------------------------------------------------------- */ /* ARGSUSED */ static herr_t H5FD_sec2_truncate(H5FD_t *_file, hid_t UNUSED dxpl_id, hbool_t UNUSED closing) { H5FD_sec2_t *file = (H5FD_sec2_t*)_file; herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5FD_sec2_truncate, FAIL) HDassert(file); /* Extend the file to make sure it's large enough */ if(!H5F_addr_eq(file->eoa, file->eof)) { #ifdef _WIN32 HFILE filehandle; /* Windows file handle */ LARGE_INTEGER li; /* 64-bit integer for SetFilePointer() call */ /* Map the posix file handle to a Windows file handle */ filehandle = _get_osfhandle(file->fd); /* Translate 64-bit integers into form Windows wants */ /* [This algorithm is from the Windows documentation for SetFilePointer()] */ li.QuadPart = (LONGLONG)file->eoa; (void)SetFilePointer((HANDLE)filehandle, li.LowPart, &li.HighPart, FILE_BEGIN); if(SetEndOfFile((HANDLE)filehandle) == 0) HGOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to extend file properly") #else /* _WIN32 */ #ifdef H5_VMS /* Reset seek offset to the beginning of the file, so that the file isn't * re-extended later. This may happen on Open VMS. */ if(-1 == HDlseek(file->fd, (HDoff_t)0, SEEK_SET)) HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position") #endif if(-1 == HDftruncate(file->fd, (HDoff_t)file->eoa)) HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to extend file properly") #endif /* _WIN32 */ /* Update the eof value */ file->eof = file->eoa; /* Reset last file I/O information */ file->pos = HADDR_UNDEF; file->op = OP_UNKNOWN; } /* end if */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5FD_sec2_truncate() */