/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* Programmer: Robb Matzke * Wednesday, October 22, 1997 * * Purpose: The C STDIO virtual file driver which only uses calls from stdio.h. * This also serves as an example of coding a simple file driver, * therefore, it should not use any non-public definitions. * * NOTE: This driver is not as well tested as the standard SEC2 driver * and is not intended for production use! */ #include #include #include #include #include #include "hdf5.h" #ifdef H5_HAVE_FLOCK /* Needed for lock type definitions (e.g., LOCK_EX) */ #include #endif /* H5_HAVE_FLOCK */ #ifdef H5_HAVE_UNISTD_H #include #endif #ifdef H5_HAVE_WIN32_API /* The following two defines must be before any windows headers are included */ #define WIN32_LEAN_AND_MEAN /* Exclude rarely-used stuff from Windows headers */ #define NOGDI /* Exclude Graphic Display Interface macros */ #include #include #endif /* H5_HAVE_WIN32_API */ /* The driver identification number, initialized at runtime */ static hid_t H5FD_STDIO_g = 0; /* The maximum number of bytes which can be written in a single I/O operation */ static size_t H5_STDIO_MAX_IO_BYTES_g = (size_t)-1; /* File operations */ typedef enum { H5FD_STDIO_OP_UNKNOWN=0, H5FD_STDIO_OP_READ=1, H5FD_STDIO_OP_WRITE=2, H5FD_STDIO_OP_SEEK=3 } H5FD_stdio_file_op; /* The description of a file belonging to this driver. The 'eoa' and 'eof' * determine the amount of hdf5 address space in use and the high-water mark * of the file (the current size of the underlying Unix file). The 'pos' * value is used to eliminate file position updates when they would be a * no-op. Unfortunately we've found systems that use separate file position * indicators for reading and writing so the lseek can only be eliminated if * the current operation is the same as the previous operation. When opening * a file the 'eof' will be set to the current file size, 'eoa' will be set * to zero, 'pos' will be set to H5F_ADDR_UNDEF (as it is when an error * occurs), and 'op' will be set to H5F_OP_UNKNOWN. */ typedef struct H5FD_stdio_t { H5FD_t pub; /* public stuff, must be first */ FILE *fp; /* the file handle */ int fd; /* file descriptor (for truncate) */ haddr_t eoa; /* end of allocated region */ haddr_t eof; /* end of file; current file size */ haddr_t pos; /* current file I/O position */ unsigned write_access; /* Flag to indicate the file was opened with write access */ H5FD_stdio_file_op op; /* last operation */ #ifndef H5_HAVE_WIN32_API /* On most systems the combination of device and i-node number uniquely * identify a file. Note that Cygwin, MinGW and other Windows POSIX * environments have the stat function (which fakes inodes) * and will use the 'device + inodes' scheme as opposed to the * Windows code further below. */ dev_t device; /* file device number */ ino_t inode; /* file i-node number */ #else /* Files in windows are uniquely identified by the volume serial * number and the file index (both low and high parts). * * There are caveats where these numbers can change, especially * on FAT file systems. On NTFS, however, a file should keep * those numbers the same until renamed or deleted (though you * can use ReplaceFile() on NTFS to keep the numbers the same * while renaming). * * See the MSDN "BY_HANDLE_FILE_INFORMATION Structure" entry for * more information. * * http://msdn.microsoft.com/en-us/library/aa363788(v=VS.85).aspx */ DWORD nFileIndexLow; DWORD nFileIndexHigh; DWORD dwVolumeSerialNumber; HANDLE hFile; /* Native windows file handle */ #endif /* H5_HAVE_WIN32_API */ } H5FD_stdio_t; /* Use similar structure as in H5private.h by defining Windows stuff first. */ #ifdef H5_HAVE_WIN32_API #ifndef H5_HAVE_MINGW #define file_fseek _fseeki64 #define file_offset_t __int64 #define file_ftruncate _chsize_s /* Supported in VS 2005 or newer */ #define file_ftell _ftelli64 #endif /* H5_HAVE_MINGW */ #endif /* H5_HAVE_WIN32_API */ /* Use file_xxx to indicate these are local macros, avoiding confusing * with the global HD_xxx macros. * Assume fseeko, which is POSIX standard, is always supported; * but prefer to use fseeko64 if supported. */ #ifndef file_fseek #ifdef H5_HAVE_FSEEKO64 #define file_fseek fseeko64 #define file_offset_t off64_t #define file_ftruncate ftruncate64 #define file_ftell ftello64 #else #define file_fseek fseeko #define file_offset_t off_t #define file_ftruncate ftruncate #define file_ftell ftello #endif /* H5_HAVE_FSEEKO64 */ #endif /* file_fseek */ /* These macros check for overflow of various quantities. These macros * assume that file_offset_t is signed and haddr_t and size_t are unsigned. * * ADDR_OVERFLOW: Checks whether a file address of type `haddr_t' * is too large to be represented by the second argument * of the file seek function. * * SIZE_OVERFLOW: Checks whether a buffer size of type `hsize_t' is too * large to be represented by the `size_t' type. * * REGION_OVERFLOW: Checks whether an address and size pair describe data * which can be addressed entirely by the second * argument of the file seek function. */ /* adding for windows NT filesystem support. */ #define MAXADDR (((haddr_t)1<<(8*sizeof(file_offset_t)-1))-1) #define ADDR_OVERFLOW(A) (HADDR_UNDEF==(A) || ((A) & ~(haddr_t)MAXADDR)) #define SIZE_OVERFLOW(Z) ((Z) & ~(hsize_t)MAXADDR) #define REGION_OVERFLOW(A,Z) (ADDR_OVERFLOW(A) || SIZE_OVERFLOW(Z) || \ HADDR_UNDEF==(A)+(Z) || (file_offset_t)((A)+(Z))<(file_offset_t)(A)) /* Prototypes */ static herr_t H5FD_stdio_term(void); static H5FD_t *H5FD_stdio_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr); static herr_t H5FD_stdio_close(H5FD_t *lf); static int H5FD_stdio_cmp(const H5FD_t *_f1, const H5FD_t *_f2); static herr_t H5FD_stdio_query(const H5FD_t *_f1, unsigned long *flags); static haddr_t H5FD_stdio_alloc(H5FD_t *_file, H5FD_mem_t type, hid_t dxpl_id, hsize_t size); static haddr_t H5FD_stdio_get_eoa(const H5FD_t *_file, H5FD_mem_t type); static herr_t H5FD_stdio_set_eoa(H5FD_t *_file, H5FD_mem_t type, haddr_t addr); static haddr_t H5FD_stdio_get_eof(const H5FD_t *_file, H5FD_mem_t type); static herr_t H5FD_stdio_get_handle(H5FD_t *_file, hid_t fapl, void** file_handle); static herr_t H5FD_stdio_read(H5FD_t *lf, H5FD_mem_t type, hid_t fapl_id, haddr_t addr, size_t size, void *buf); static herr_t H5FD_stdio_write(H5FD_t *lf, H5FD_mem_t type, hid_t fapl_id, haddr_t addr, size_t size, const void *buf); static herr_t H5FD_stdio_flush(H5FD_t *_file, hid_t dxpl_id, unsigned closing); static herr_t H5FD_stdio_truncate(H5FD_t *_file, hid_t dxpl_id, hbool_t closing); static herr_t H5FD_stdio_lock(H5FD_t *_file, hbool_t rw); static herr_t H5FD_stdio_unlock(H5FD_t *_file); static const H5FD_class_t H5FD_stdio_g = { "stdio", /* name */ MAXADDR, /* maxaddr */ H5F_CLOSE_WEAK, /* fc_degree */ H5FD_stdio_term, /* terminate */ NULL, /* sb_size */ NULL, /* sb_encode */ NULL, /* sb_decode */ 0, /* fapl_size */ NULL, /* fapl_get */ NULL, /* fapl_copy */ NULL, /* fapl_free */ 0, /* dxpl_size */ NULL, /* dxpl_copy */ NULL, /* dxpl_free */ H5FD_stdio_open, /* open */ H5FD_stdio_close, /* close */ H5FD_stdio_cmp, /* cmp */ H5FD_stdio_query, /* query */ NULL, /* get_type_map */ H5FD_stdio_alloc, /* alloc */ NULL, /* free */ H5FD_stdio_get_eoa, /* get_eoa */ H5FD_stdio_set_eoa, /* set_eoa */ H5FD_stdio_get_eof, /* get_eof */ H5FD_stdio_get_handle, /* get_handle */ H5FD_stdio_read, /* read */ H5FD_stdio_write, /* write */ H5FD_stdio_flush, /* flush */ H5FD_stdio_truncate, /* truncate */ H5FD_stdio_lock, /* lock */ H5FD_stdio_unlock, /* unlock */ H5FD_FLMAP_DICHOTOMY /* fl_map */ }; /*------------------------------------------------------------------------- * Function: H5FD_stdio_init * * Purpose: Initialize this driver by registering the driver with the * library. * * Return: Success: The driver ID for the stdio driver. * * Failure: Negative. * * Programmer: Robb Matzke * Thursday, July 29, 1999 * *------------------------------------------------------------------------- */ hid_t H5FD_stdio_init(void) { /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); if (H5I_VFL!=H5Iget_type(H5FD_STDIO_g)) H5FD_STDIO_g = H5FDregister(&H5FD_stdio_g); return H5FD_STDIO_g; } /* end H5FD_stdio_init() */ /*--------------------------------------------------------------------------- * Function: H5FD_stdio_term * * Purpose: Shut down the VFD * * Returns: Non-negative on success or negative on failure * * Programmer: Quincey Koziol * Friday, Jan 30, 2004 * *--------------------------------------------------------------------------- */ static herr_t H5FD_stdio_term(void) { /* Reset VFL ID */ H5FD_STDIO_g = 0; return 0; } /* end H5FD_stdio_term() */ /*------------------------------------------------------------------------- * Function: H5Pset_fapl_stdio * * Purpose: Modify the file access property list to use the H5FD_STDIO * driver defined in this source file. There are no driver * specific properties. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Thursday, February 19, 1998 * *------------------------------------------------------------------------- */ herr_t H5Pset_fapl_stdio(hid_t fapl_id) { static const char *func = "H5FDset_fapl_stdio"; /*for error reporting*/ /*NO TRACE*/ /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); if(0 == H5Pisa_class(fapl_id, H5P_FILE_ACCESS)) H5Epush_ret(func, H5E_ERR_CLS, H5E_PLIST, H5E_BADTYPE, "not a file access property list", -1) return H5Pset_driver(fapl_id, H5FD_STDIO, NULL); } /* end H5Pset_fapl_stdio() */ /*------------------------------------------------------------------------- * Function: H5FD_stdio_open * * Purpose: Create and/or opens a Standard C file as an HDF5 file. * * Errors: * IO CANTOPENFILE File doesn't exist and CREAT wasn't * specified. * IO CANTOPENFILE fopen() failed. * IO FILEEXISTS File exists but CREAT and EXCL were * specified. * * Return: * Success: A pointer to a new file data structure. The * public fields will be initialized by the * caller, which is always H5FD_open(). * * Failure: NULL * * Programmer: Robb Matzke * Wednesday, October 22, 1997 * *------------------------------------------------------------------------- */ static H5FD_t * H5FD_stdio_open( const char *name, unsigned flags, hid_t /*UNUSED*/ fapl_id, haddr_t maxaddr) { FILE *f = NULL; unsigned write_access = 0; /* File opened with write access? */ H5FD_stdio_t *file = NULL; static const char *func = "H5FD_stdio_open"; /* Function Name for error reporting */ #ifdef H5_HAVE_WIN32_API struct _BY_HANDLE_FILE_INFORMATION fileinfo; #else /* H5_HAVE_WIN32_API */ struct stat sb; #endif /* H5_HAVE_WIN32_API */ /* Sanity check on file offsets */ assert(sizeof(file_offset_t) >= sizeof(size_t)); /* Quiet compiler */ fapl_id = fapl_id; /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); /* Check arguments */ if (!name || !*name) H5Epush_ret(func, H5E_ERR_CLS, H5E_ARGS, H5E_BADVALUE, "invalid file name", NULL) if (0 == maxaddr || HADDR_UNDEF == maxaddr) H5Epush_ret(func, H5E_ERR_CLS, H5E_ARGS, H5E_BADRANGE, "bogus maxaddr", NULL) if (ADDR_OVERFLOW(maxaddr)) H5Epush_ret(func, H5E_ERR_CLS, H5E_ARGS, H5E_OVERFLOW, "maxaddr too large", NULL) /* Tentatively open file in read-only mode, to check for existence */ if(flags & H5F_ACC_RDWR) f = fopen(name, "rb+"); else f = fopen(name, "rb"); if(!f) { /* File doesn't exist */ if(flags & H5F_ACC_CREAT) { assert(flags & H5F_ACC_RDWR); f = fopen(name, "wb+"); write_access = 1; /* Note the write access */ } else H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_CANTOPENFILE, "file doesn't exist and CREAT wasn't specified", NULL) } else if(flags & H5F_ACC_EXCL) { /* File exists, but EXCL is passed. Fail. */ assert(flags & H5F_ACC_CREAT); fclose(f); H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_FILEEXISTS, "file exists but CREAT and EXCL were specified", NULL) } else if(flags & H5F_ACC_RDWR) { if(flags & H5F_ACC_TRUNC) f = freopen(name, "wb+", f); write_access = 1; /* Note the write access */ } /* end if */ /* Note there is no need to reopen if neither TRUNC nor EXCL are specified, * as the tentative open will work */ if(!f) H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_CANTOPENFILE, "fopen failed", NULL) /* Build the return value */ if(NULL == (file = (H5FD_stdio_t *)calloc((size_t)1, sizeof(H5FD_stdio_t)))) { fclose(f); H5Epush_ret(func, H5E_ERR_CLS, H5E_RESOURCE, H5E_NOSPACE, "memory allocation failed", NULL) } /* end if */ file->fp = f; file->op = H5FD_STDIO_OP_SEEK; file->pos = HADDR_UNDEF; file->write_access = write_access; /* Note the write_access for later */ if(file_fseek(file->fp, (file_offset_t)0, SEEK_END) < 0) { file->op = H5FD_STDIO_OP_UNKNOWN; } else { file_offset_t x = file_ftell(file->fp); assert (x >= 0); file->eof = (haddr_t)x; } /* Get the file descriptor (needed for truncate and some Windows information) */ #ifdef H5_HAVE_WIN32_API file->fd = _fileno(file->fp); #else /* H5_HAVE_WIN32_API */ file->fd = fileno(file->fp); #endif /* H5_HAVE_WIN32_API */ if(file->fd < 0) { free(file); fclose(f); H5Epush_ret(func, H5E_ERR_CLS, H5E_FILE, H5E_CANTOPENFILE, "unable to get file descriptor", NULL); } /* end if */ #ifdef H5_HAVE_WIN32_API file->hFile = (HANDLE)_get_osfhandle(file->fd); if(INVALID_HANDLE_VALUE == file->hFile) { free(file); fclose(f); H5Epush_ret(func, H5E_ERR_CLS, H5E_FILE, H5E_CANTOPENFILE, "unable to get Windows file handle", NULL); } /* end if */ if(!GetFileInformationByHandle((HANDLE)file->hFile, &fileinfo)) { free(file); fclose(f); H5Epush_ret(func, H5E_ERR_CLS, H5E_FILE, H5E_CANTOPENFILE, "unable to get Windows file descriptor information", NULL); } /* end if */ file->nFileIndexHigh = fileinfo.nFileIndexHigh; file->nFileIndexLow = fileinfo.nFileIndexLow; file->dwVolumeSerialNumber = fileinfo.dwVolumeSerialNumber; #else /* H5_HAVE_WIN32_API */ if(fstat(file->fd, &sb) < 0) { free(file); fclose(f); H5Epush_ret(func, H5E_ERR_CLS, H5E_FILE, H5E_BADFILE, "unable to fstat file", NULL) } /* end if */ file->device = sb.st_dev; file->inode = sb.st_ino; #endif /* H5_HAVE_WIN32_API */ return((H5FD_t*)file); } /* end H5FD_stdio_open() */ /*------------------------------------------------------------------------- * Function: H5F_stdio_close * * Purpose: Closes a file. * * Errors: * IO CLOSEERROR Fclose failed. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Wednesday, October 22, 1997 * *------------------------------------------------------------------------- */ static herr_t H5FD_stdio_close(H5FD_t *_file) { H5FD_stdio_t *file = (H5FD_stdio_t*)_file; static const char *func = "H5FD_stdio_close"; /* Function Name for error reporting */ /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); if (fclose(file->fp) < 0) H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_CLOSEERROR, "fclose failed", -1) free(file); return 0; } /* end H5FD_stdio_close() */ /*------------------------------------------------------------------------- * Function: H5FD_stdio_cmp * * Purpose: Compares two files belonging to this driver using an * arbitrary (but consistent) ordering. * * Return: * Success: A value like strcmp() * * Failure: never fails (arguments were checked by the caller). * * Programmer: Robb Matzke * Thursday, July 29, 1999 * *------------------------------------------------------------------------- */ static int H5FD_stdio_cmp(const H5FD_t *_f1, const H5FD_t *_f2) { const H5FD_stdio_t *f1 = (const H5FD_stdio_t*)_f1; const H5FD_stdio_t *f2 = (const H5FD_stdio_t*)_f2; /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); #ifdef H5_HAVE_WIN32_API if(f1->dwVolumeSerialNumber < f2->dwVolumeSerialNumber) return -1; if(f1->dwVolumeSerialNumber > f2->dwVolumeSerialNumber) return 1; if(f1->nFileIndexHigh < f2->nFileIndexHigh) return -1; if(f1->nFileIndexHigh > f2->nFileIndexHigh) return 1; if(f1->nFileIndexLow < f2->nFileIndexLow) return -1; if(f1->nFileIndexLow > f2->nFileIndexLow) return 1; #else /* H5_HAVE_WIN32_API */ #ifdef H5_DEV_T_IS_SCALAR if(f1->device < f2->device) return -1; if(f1->device > f2->device) return 1; #else /* H5_DEV_T_IS_SCALAR */ /* If dev_t isn't a scalar value on this system, just use memcmp to * determine if the values are the same or not. The actual return value * shouldn't really matter... */ if(memcmp(&(f1->device),&(f2->device),sizeof(dev_t)) < 0) return -1; if(memcmp(&(f1->device),&(f2->device),sizeof(dev_t)) > 0) return 1; #endif /* H5_DEV_T_IS_SCALAR */ if(f1->inode < f2->inode) return -1; if(f1->inode > f2->inode) return 1; #endif /* H5_HAVE_WIN32_API */ return 0; } /* H5FD_stdio_cmp() */ /*------------------------------------------------------------------------- * Function: H5FD_stdio_query * * Purpose: Set the flags that this VFL driver is capable of supporting. * (listed in H5FDpublic.h) * * Return: Success: non-negative * * Failure: negative * * Programmer: Quincey Koziol * Friday, August 25, 2000 * *------------------------------------------------------------------------- */ static herr_t H5FD_stdio_query(const H5FD_t *_f, unsigned long /*OUT*/ *flags) { /* Quiet the compiler */ _f=_f; /* Set the VFL feature flags that this driver supports. * * Note that this VFD does not support SWMR due to the unpredictable * nature of the buffering layer. */ if(flags) { *flags = 0; *flags|=H5FD_FEAT_AGGREGATE_METADATA; /* OK to aggregate metadata allocations */ *flags|=H5FD_FEAT_ACCUMULATE_METADATA; /* OK to accumulate metadata for faster writes */ *flags|=H5FD_FEAT_DATA_SIEVE; /* OK to perform data sieving for faster raw data reads & writes */ *flags|=H5FD_FEAT_AGGREGATE_SMALLDATA; /* OK to aggregate "small" raw data allocations */ } return 0; } /* end H5FD_stdio_query() */ /*------------------------------------------------------------------------- * Function: H5FD_stdio_alloc * * Purpose: Allocates file memory. If fseeko isn't available, makes * sure the file size isn't bigger than 2GB because the * parameter OFFSET of fseek is of the type LONG INT, limiting * the file size to 2GB. * * Return: * Success: Address of new memory * * Failure: HADDR_UNDEF * * Programmer: Raymond Lu * 30 March 2007 * *------------------------------------------------------------------------- */ static haddr_t H5FD_stdio_alloc(H5FD_t *_file, H5FD_mem_t /*UNUSED*/ type, hid_t /*UNUSED*/ dxpl_id, hsize_t size) { H5FD_stdio_t *file = (H5FD_stdio_t*)_file; haddr_t addr; /* Quiet compiler */ type = type; dxpl_id = dxpl_id; /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); /* Compute the address for the block to allocate */ addr = file->eoa; /* Check if we need to align this block */ if(size >= file->pub.threshold) { /* Check for an already aligned block */ if((addr % file->pub.alignment) != 0) addr = ((addr / file->pub.alignment) + 1) * file->pub.alignment; } /* end if */ file->eoa = addr + size; return addr; } /* end H5FD_stdio_alloc() */ /*------------------------------------------------------------------------- * Function: H5FD_stdio_get_eoa * * Purpose: Gets the end-of-address marker for the file. The EOA marker * is the first address past the last byte allocated in the * format address space. * * Return: Success: The end-of-address marker. * * Failure: HADDR_UNDEF * * Programmer: Robb Matzke * Monday, August 2, 1999 * *------------------------------------------------------------------------- */ static haddr_t H5FD_stdio_get_eoa(const H5FD_t *_file, H5FD_mem_t /*UNUSED*/ type) { const H5FD_stdio_t *file = (const H5FD_stdio_t *)_file; /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); /* Quiet compiler */ type = type; return file->eoa; } /* end H5FD_stdio_get_eoa() */ /*------------------------------------------------------------------------- * Function: H5FD_stdio_set_eoa * * Purpose: Set the end-of-address marker for the file. This function is * called shortly after an existing HDF5 file is opened in order * to tell the driver where the end of the HDF5 data is located. * * Return: Success: 0 * * Failure: Does not fail * * Programmer: Robb Matzke * Thursday, July 29, 1999 * *------------------------------------------------------------------------- */ static herr_t H5FD_stdio_set_eoa(H5FD_t *_file, H5FD_mem_t /*UNUSED*/ type, haddr_t addr) { H5FD_stdio_t *file = (H5FD_stdio_t*)_file; /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); /* Quiet the compiler */ type = type; file->eoa = addr; return 0; } /*------------------------------------------------------------------------- * Function: H5FD_stdio_get_eof * * Purpose: Returns the end-of-file marker, which is the greater of * either the Unix end-of-file or the HDF5 end-of-address * markers. * * Return: Success: End of file address, the first address past * the end of the "file", either the Unix file * or the HDF5 file. * * Failure: HADDR_UNDEF * * Programmer: Robb Matzke * Thursday, July 29, 1999 * *------------------------------------------------------------------------- */ static haddr_t H5FD_stdio_get_eof(const H5FD_t *_file, H5FD_mem_t /*UNUSED*/ type) { const H5FD_stdio_t *file = (const H5FD_stdio_t *)_file; /* Quiet the compiler */ type = type; /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); /* Quiet the compiler */ type = type; return(file->eof); } /* end H5FD_stdio_get_eof() */ /*------------------------------------------------------------------------- * Function: H5FD_stdio_get_handle * * Purpose: Returns the file handle of stdio file driver. * * Returns: Non-negative if succeed or negative if fails. * * Programmer: Raymond Lu * Sept. 16, 2002 * *------------------------------------------------------------------------- */ static herr_t H5FD_stdio_get_handle(H5FD_t *_file, hid_t /*UNUSED*/ fapl, void **file_handle) { H5FD_stdio_t *file = (H5FD_stdio_t *)_file; static const char *func = "H5FD_stdio_get_handle"; /* Function Name for error reporting */ /* Quiet the compiler */ fapl = fapl; /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); *file_handle = &(file->fp); if(*file_handle == NULL) H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_WRITEERROR, "get handle failed", -1) return 0; } /* end H5FD_stdio_get_handle() */ /*------------------------------------------------------------------------- * Function: H5FD_stdio_read * * Purpose: Reads SIZE bytes beginning at address ADDR in file LF and * places them in buffer BUF. Reading past the logical or * physical end of file returns zeros instead of failing. * * Errors: * IO READERROR fread failed. * IO SEEKERROR fseek failed. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Wednesday, October 22, 1997 * *------------------------------------------------------------------------- */ static herr_t H5FD_stdio_read(H5FD_t *_file, H5FD_mem_t /*UNUSED*/ type, hid_t /*UNUSED*/ dxpl_id, haddr_t addr, size_t size, void /*OUT*/ *buf) { H5FD_stdio_t *file = (H5FD_stdio_t*)_file; static const char *func = "H5FD_stdio_read"; /* Function Name for error reporting */ /* Quiet the compiler */ type = type; dxpl_id = dxpl_id; /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); /* Check for overflow */ if (HADDR_UNDEF==addr) H5Epush_ret (func, H5E_ERR_CLS, H5E_IO, H5E_OVERFLOW, "file address overflowed", -1) if (REGION_OVERFLOW(addr, size)) H5Epush_ret (func, H5E_ERR_CLS, H5E_IO, H5E_OVERFLOW, "file address overflowed", -1) /* Check easy cases */ if (0 == size) return 0; if ((haddr_t)addr >= file->eof) { memset(buf, 0, size); return 0; } /* Seek to the correct file position. */ if (!(file->op == H5FD_STDIO_OP_READ || file->op == H5FD_STDIO_OP_SEEK) || file->pos != addr) { if (file_fseek(file->fp, (file_offset_t)addr, SEEK_SET) < 0) { file->op = H5FD_STDIO_OP_UNKNOWN; file->pos = HADDR_UNDEF; H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_SEEKERROR, "fseek failed", -1) } file->pos = addr; } /* Read zeros past the logical end of file (physical is handled below) */ if (addr + size > file->eof) { size_t nbytes = (size_t) (addr + size - file->eof); memset((unsigned char *)buf + size - nbytes, 0, nbytes); size -= nbytes; } /* Read the data. Since we're reading single-byte values, a partial read * will advance the file position by N. If N is zero or an error * occurs then the file position is undefined. */ while(size > 0) { size_t bytes_in = 0; /* # of bytes to read */ size_t bytes_read = 0; /* # of bytes actually read */ size_t item_size = 1; /* size of items in bytes */ if(size > H5_STDIO_MAX_IO_BYTES_g) bytes_in = H5_STDIO_MAX_IO_BYTES_g; else bytes_in = size; bytes_read = fread(buf, item_size, bytes_in, file->fp); if(0 == bytes_read && ferror(file->fp)) { /* error */ file->op = H5FD_STDIO_OP_UNKNOWN; file->pos = HADDR_UNDEF; H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_READERROR, "fread failed", -1) } /* end if */ if(0 == bytes_read && feof(file->fp)) { /* end of file but not end of format address space */ memset((unsigned char *)buf, 0, size); break; } /* end if */ size -= bytes_read; addr += (haddr_t)bytes_read; buf = (char *)buf + bytes_read; } /* end while */ /* Update the file position data. */ file->op = H5FD_STDIO_OP_READ; file->pos = addr; return 0; } /*------------------------------------------------------------------------- * Function: H5FD_stdio_write * * Purpose: Writes SIZE bytes from the beginning of BUF into file LF at * file address ADDR. * * Errors: * IO SEEKERROR fseek failed. * IO WRITEERROR fwrite failed. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Wednesday, October 22, 1997 * *------------------------------------------------------------------------- */ static herr_t H5FD_stdio_write(H5FD_t *_file, H5FD_mem_t /*UNUSED*/ type, hid_t /*UNUSED*/ dxpl_id, haddr_t addr, size_t size, const void *buf) { H5FD_stdio_t *file = (H5FD_stdio_t*)_file; static const char *func = "H5FD_stdio_write"; /* Function Name for error reporting */ /* Quiet the compiler */ dxpl_id = dxpl_id; type = type; /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); /* Check for overflow conditions */ if (HADDR_UNDEF == addr) H5Epush_ret (func, H5E_ERR_CLS, H5E_IO, H5E_OVERFLOW, "file address overflowed", -1) if (REGION_OVERFLOW(addr, size)) H5Epush_ret (func, H5E_ERR_CLS, H5E_IO, H5E_OVERFLOW, "file address overflowed", -1) /* Seek to the correct file position. */ if ((file->op != H5FD_STDIO_OP_WRITE && file->op != H5FD_STDIO_OP_SEEK) || file->pos != addr) { if (file_fseek(file->fp, (file_offset_t)addr, SEEK_SET) < 0) { file->op = H5FD_STDIO_OP_UNKNOWN; file->pos = HADDR_UNDEF; H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_SEEKERROR, "fseek failed", -1) } file->pos = addr; } /* Write the buffer. On successful return, the file position will be * advanced by the number of bytes read. On failure, the file position is * undefined. */ while(size > 0) { size_t bytes_in = 0; /* # of bytes to write */ size_t bytes_wrote = 0; /* # of bytes written */ size_t item_size = 1; /* size of items in bytes */ if(size > H5_STDIO_MAX_IO_BYTES_g) bytes_in = H5_STDIO_MAX_IO_BYTES_g; else bytes_in = size; bytes_wrote = fwrite(buf, item_size, bytes_in, file->fp); if(bytes_wrote != bytes_in || (0 == bytes_wrote && ferror(file->fp))) { /* error */ file->op = H5FD_STDIO_OP_UNKNOWN; file->pos = HADDR_UNDEF; H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_WRITEERROR, "fwrite failed", -1) } /* end if */ assert(bytes_wrote > 0); assert((size_t)bytes_wrote <= size); size -= bytes_wrote; addr += (haddr_t)bytes_wrote; buf = (const char *)buf + bytes_wrote; } /* Update seek optimizing data. */ file->op = H5FD_STDIO_OP_WRITE; file->pos = addr; /* Update EOF if necessary */ if (file->pos > file->eof) file->eof = file->pos; return 0; } /*------------------------------------------------------------------------- * Function: H5FD_stdio_flush * * Purpose: Makes sure that all data is on disk. * * Errors: * IO SEEKERROR fseek failed. * IO WRITEERROR fflush or fwrite failed. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Wednesday, October 22, 1997 * *------------------------------------------------------------------------- */ static herr_t H5FD_stdio_flush(H5FD_t *_file, hid_t /*UNUSED*/ dxpl_id, unsigned closing) { H5FD_stdio_t *file = (H5FD_stdio_t*)_file; static const char *func = "H5FD_stdio_flush"; /* Function Name for error reporting */ /* Quiet the compiler */ dxpl_id = dxpl_id; /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); /* Only try to flush the file if we have write access */ if(file->write_access) { if(!closing) { if(fflush(file->fp) < 0) H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_WRITEERROR, "fflush failed", -1) /* Reset last file I/O information */ file->pos = HADDR_UNDEF; file->op = H5FD_STDIO_OP_UNKNOWN; } /* end if */ } /* end if */ return 0; } /* end H5FD_stdio_flush() */ /*------------------------------------------------------------------------- * Function: H5FD_stdio_truncate * * Purpose: Makes sure that the true file size is the same (or larger) * than the end-of-address. * * Errors: * IO SEEKERROR fseek failed. * IO WRITEERROR fflush or fwrite failed. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Thursday, January 31, 2008 * *------------------------------------------------------------------------- */ static herr_t H5FD_stdio_truncate(H5FD_t *_file, hid_t /*UNUSED*/ dxpl_id, hbool_t /*UNUSED*/ closing) { H5FD_stdio_t *file = (H5FD_stdio_t*)_file; static const char *func = "H5FD_stdio_truncate"; /* Function Name for error reporting */ /* Quiet the compiler */ dxpl_id = dxpl_id; closing = closing; /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); /* Only try to flush the file if we have write access */ if(file->write_access) { /* Makes sure that the true file size is the same as the end-of-address. */ if(file->eoa != file->eof) { #ifdef H5_HAVE_WIN32_API LARGE_INTEGER li; /* 64-bit (union) integer for SetFilePointer() call */ DWORD dwPtrLow; /* Low-order pointer bits from SetFilePointer() * Only used as an error code here. */ DWORD dwError; /* DWORD error code from GetLastError() */ BOOL bError; /* Boolean error flag */ /* Reset seek offset to beginning of file, so that file isn't re-extended later */ rewind(file->fp); /* Windows uses this odd QuadPart union for 32/64-bit portability */ li.QuadPart = (__int64)file->eoa; /* Extend the file to make sure it's large enough. * * Since INVALID_SET_FILE_POINTER can technically be a valid return value * from SetFilePointer(), we also need to check GetLastError(). */ dwPtrLow = SetFilePointer(file->hFile, li.LowPart, &li.HighPart, FILE_BEGIN); if(INVALID_SET_FILE_POINTER == dwPtrLow) { dwError = GetLastError(); if(dwError != NO_ERROR ) H5Epush_ret(func, H5E_ERR_CLS, H5E_FILE, H5E_FILEOPEN, "unable to set file pointer", -1) } bError = SetEndOfFile(file->hFile); if(0 == bError) H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_SEEKERROR, "unable to truncate/extend file properly", -1) #else /* H5_HAVE_WIN32_API */ /* Reset seek offset to beginning of file, so that file isn't re-extended later */ rewind(file->fp); /* Truncate file to proper length */ if(-1 == file_ftruncate(file->fd, (file_offset_t)file->eoa)) H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_SEEKERROR, "unable to truncate/extend file properly", -1) #endif /* H5_HAVE_WIN32_API */ /* Update the eof value */ file->eof = file->eoa; /* Reset last file I/O information */ file->pos = HADDR_UNDEF; file->op = H5FD_STDIO_OP_UNKNOWN; } /* end if */ } /* end if */ else { /* Double-check for problems */ if(file->eoa > file->eof) H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_TRUNCATED, "eoa > eof!", -1) } /* end else */ return 0; } /* end H5FD_stdio_truncate() */ /*------------------------------------------------------------------------- * Function: H5FD_stdio_lock * * Purpose: Lock a file via flock * * NOTE: This function is a no-op if flock() is not present. * Errors: * IO FCNTL flock failed. * * Return: Non-negative on success/Negative on failure * * Programmer: Vailin Choi; March 2015 * *------------------------------------------------------------------------- */ static herr_t H5FD_stdio_lock(H5FD_t *_file, hbool_t rw) { #ifdef H5_HAVE_FLOCK H5FD_stdio_t *file = (H5FD_stdio_t*)_file; int lock; /* The type of lock */ static const char *func = "H5FD_stdio_lock"; /* Function Name for error reporting */ /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); assert(file); /* Determine the type of lock */ lock = rw ? LOCK_EX : LOCK_SH; /* Place the lock with non-blocking */ if(flock(file->fd, lock | LOCK_NB) < 0) H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_FCNTL, "flock failed", -1) if(fflush(file->fp) < 0) H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_WRITEERROR, "fflush failed", -1) #endif /* H5_HAVE_FLOCK */ return 0; } /* end H5FD_stdio_lock() */ /*------------------------------------------------------------------------- * Function: H5F_stdio_unlock * * Purpose: Unlock a file via flock * * * NOTE: This function is a no-op if flock() is not present. * Errors: * IO FCNTL flock failed. * * Return: Non-negative on success/Negative on failure * * Programmer: Vailin Choi; March 2015 * *------------------------------------------------------------------------- */ static herr_t H5FD_stdio_unlock(H5FD_t *_file) { #ifdef H5_HAVE_FLOCK H5FD_stdio_t *file = (H5FD_stdio_t*)_file; static const char *func = "H5FD_stdio_unlock"; /* Function Name for error reporting */ /* Clear the error stack */ H5Eclear2(H5E_DEFAULT); assert(file); if(fflush(file->fp) < 0) H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_WRITEERROR, "fflush failed", -1) if(flock(file->fd, LOCK_UN) < 0) H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_FCNTL, "flock (unlock) failed", -1) #endif /* H5_HAVE_FLOCK */ return 0; } /* end H5FD_stdio_unlock() */ #ifdef _H5private_H /* * This is not related to the functionality of the driver code. * It is added here to trigger warning if HDF5 private definitions are included * by mistake. The code should use only HDF5 public API and definitions. */ #error "Do not use HDF5 private definitions" #endif