/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /*------------------------------------------------------------------------- * * Created: H5O.c * Aug 5 1997 * Robb Matzke * * Purpose: Object header routines. * *------------------------------------------------------------------------- */ /****************/ /* Module Setup */ /****************/ #define H5F_PACKAGE /*suppress error about including H5Fpkg */ #define H5O_PACKAGE /*suppress error about including H5Opkg */ /***********/ /* Headers */ /***********/ #include "H5private.h" /* Generic Functions */ #include "H5Eprivate.h" /* Error handling */ #include "H5Fpkg.h" /* File access */ #include "H5FLprivate.h" /* Free lists */ #include "H5Iprivate.h" /* IDs */ #include "H5MFprivate.h" /* File memory management */ #include "H5MMprivate.h" /* Memory management */ #include "H5Opkg.h" /* Object headers */ #include "H5SMprivate.h" /* Shared object header messages */ /****************/ /* Local Macros */ /****************/ /* Load native information for a message, if it's not already present */ /* (Only works for messages with decode callback) */ #define LOAD_NATIVE(F, DXPL, MSG, ERR) \ if(NULL == (MSG)->native) { \ const H5O_msg_class_t *decode_type; \ \ /* Check for shared message */ \ if ((MSG)->flags & H5O_FLAG_SHARED) \ decode_type = H5O_MSG_SHARED; \ else \ decode_type = (MSG)->type; \ \ /* Decode the message */ \ HDassert(decode_type->decode); \ if(NULL == ((MSG)->native = (decode_type->decode)((F), (DXPL), (MSG)->raw))) \ HGOTO_ERROR(H5E_OHDR, H5E_CANTDECODE, ERR, "unable to decode message") \ } /* end if */ /******************/ /* Local Typedefs */ /******************/ /* User data for iteration while removing a message */ typedef struct { H5F_t *f; /* Pointer to file for insertion */ hid_t dxpl_id; /* DXPL during iteration */ int sequence; /* Sequence # to search for */ unsigned nfailed; /* # of failed message removals */ H5O_operator_t op; /* Callback routine for removal operations */ void *op_data; /* Callback data for removal operations */ hbool_t adj_link; /* Whether to adjust links when removing messages */ } H5O_iter_ud1_t; /* Typedef for "internal library" iteration operations */ typedef herr_t (*H5O_lib_operator_t)(H5O_t *oh, H5O_mesg_t *mesg/*in,out*/, unsigned sequence, unsigned *oh_flags_ptr/*out*/, void *operator_data/*in,out*/); /* Some syntactic sugar to make the compiler happy with two different kinds of iterator callbacks */ typedef union { H5O_operator_t app_op; /* Application callback for each message */ H5O_lib_operator_t lib_op; /* Library internal callback for each message */ } H5O_mesg_operator_t; /* * This table contains a list of object types, descriptions, and the * functions that determine if some object is a particular type. The table * is allocated dynamically. */ typedef struct H5O_typeinfo_t { H5G_obj_t type; /*one of the public H5G_* types */ htri_t (*isa)(H5O_t*); /*function to determine type */ char *desc; /*description of object type */ } H5O_typeinfo_t; /********************/ /* Package Typedefs */ /********************/ /********************/ /* Local Prototypes */ /********************/ static hid_t H5O_open_by_loc(H5G_loc_t *obj_loc, hid_t dxpl_id); static H5O_loc_t * H5O_get_oloc(hid_t id); static herr_t H5O_new(H5F_t *f, hid_t dxpl_id, size_t chunk_size, H5O_loc_t *loc/*out*/, haddr_t header); static herr_t H5O_reset_real(const H5O_msg_class_t *type, void *native); static void * H5O_copy_real(const H5O_msg_class_t *type, const void *mesg, void *dst); static void *H5O_read_real(H5F_t *f, H5O_t *oh, unsigned type_id, int sequence, void *mesg, hid_t dxpl_id); static unsigned H5O_find_in_ohdr(H5F_t *f, hid_t dxpl_id, H5O_t *oh, const H5O_msg_class_t **type_p, int sequence); static int H5O_modify_real(H5O_loc_t *loc, const H5O_msg_class_t *type, int overwrite, unsigned flags, unsigned update_flags, const void *mesg, hid_t dxpl_id); static int H5O_append_real(H5F_t *f, hid_t dxpl_id, H5O_t *oh, const H5O_msg_class_t *type, unsigned flags, const void *mesg, unsigned * oh_flags_ptr); static herr_t H5O_remove_real(const H5O_loc_t *loc, const H5O_msg_class_t *type, int sequence, H5O_operator_t op, void *op_data, hbool_t adj_link, hid_t dxpl_id); static herr_t H5O_delete_oh(H5F_t *f, hid_t dxpl_id, H5O_t *oh); static unsigned H5O_new_mesg(H5F_t *f, H5O_t *oh, unsigned *flags, const H5O_msg_class_t *orig_type, const void *orig_mesg, H5O_shared_t *sh_mesg, const H5O_msg_class_t **new_type, const void **new_mesg, hid_t dxpl_id, unsigned * oh_flags_ptr); static herr_t H5O_write_mesg(H5O_t *oh, unsigned idx, const H5O_msg_class_t *type, const void *mesg, unsigned flags, unsigned update_flags, unsigned * oh_flags_ptr); static herr_t H5O_iterate_real(const H5O_loc_t *loc, const H5O_msg_class_t *type, H5AC_protect_t prot, hbool_t internal, H5O_mesg_operator_t op, void *op_data, hid_t dxpl_id); static const H5O_obj_class_t *H5O_obj_class(H5O_loc_t *loc, hid_t dxpl_id); static herr_t H5O_obj_type_real(H5O_t *oh, H5O_type_t *obj_type); /*********************/ /* Package Variables */ /*********************/ /* Header message ID to class mapping */ const H5O_msg_class_t *const H5O_msg_class_g[] = { H5O_MSG_NULL, /*0x0000 Null */ H5O_MSG_SDSPACE, /*0x0001 Simple Dimensionality */ H5O_MSG_LINFO, /*0x0002 Link information */ H5O_MSG_DTYPE, /*0x0003 Data Type */ H5O_MSG_FILL, /*0x0004 Old data storage -- fill value */ H5O_MSG_FILL_NEW, /*0x0005 New Data storage -- fill value */ H5O_MSG_LINK, /*0x0006 Link */ H5O_MSG_EFL, /*0x0007 Data storage -- external data files */ H5O_MSG_LAYOUT, /*0x0008 Data Layout */ #ifdef H5O_ENABLE_BOGUS H5O_MSG_BOGUS, /*0x0009 "Bogus" */ #else /* H5O_ENABLE_BOGUS */ NULL, /*0x0009 "Bogus" */ #endif /* H5O_ENABLE_BOGUS */ H5O_MSG_GINFO, /*0x000A Group Information */ H5O_MSG_PLINE, /*0x000B Data storage -- filter pipeline */ H5O_MSG_ATTR, /*0x000C Attribute list */ H5O_MSG_NAME, /*0x000D Object name */ H5O_MSG_MTIME, /*0x000E Object modification date and time */ H5O_MSG_SHARED, /*0x000F Shared header message */ H5O_MSG_CONT, /*0x0010 Object header continuation */ H5O_MSG_STAB, /*0x0011 Symbol table */ H5O_MSG_MTIME_NEW, /*0x0012 New Object modification date and time */ }; /* Header object ID to class mapping */ /* * Initialize the object class info table. Begin with the most general types * and end with the most specific. For instance, any object that has a * datatype message is a datatype but only some of them are datasets. */ const H5O_obj_class_t *const H5O_obj_class_g[] = { H5O_OBJ_DATATYPE, /* Datatype object (H5G_TYPE - 2) */ H5O_OBJ_DATASET, /* Dataset object (H5G_DATASET - 1) */ H5O_OBJ_GROUP, /* Group object (H5G_GROUP - 0) */ }; /* Declare a free list to manage the H5O_t struct */ H5FL_DEFINE(H5O_t); /* Declare a free list to manage the H5O_mesg_t sequence information */ H5FL_SEQ_DEFINE(H5O_mesg_t); /* Declare a free list to manage the H5O_chunk_t sequence information */ H5FL_SEQ_DEFINE(H5O_chunk_t); /* Declare a free list to manage the chunk image information */ H5FL_BLK_DEFINE(chunk_image); /*****************************/ /* Library Private Variables */ /*****************************/ /*******************/ /* Local Variables */ /*******************/ /* Declare external the free list for time_t's */ H5FL_EXTERN(time_t); /*------------------------------------------------------------------------- * Function: H5Oopen * * Purpose: Opens an object within an HDF5 file. * * This function opens an object in the same way that H5Gopen, * H5Topen, and H5Dopen do. However, H5Oopen doesn't require * the type of object to be known beforehand. This can be * useful in user-defined links, for instance, when only a * path is known. * * The opened object should be closed again with H5Oclose * or H5Gclose, H5Tclose, or H5Dclose. * * Return: Success: An open object identifier * Failure: Negative * * Programmer: James Laird * July 14 2006 * *------------------------------------------------------------------------- */ hid_t H5Oopen(hid_t loc_id, const char *name, hid_t lapl_id) { H5G_loc_t loc; H5G_loc_t obj_loc; /* Location used to open group */ H5G_name_t obj_path; /* Opened object group hier. path */ H5O_loc_t obj_oloc; /* Opened object object location */ hbool_t loc_found = FALSE; /* Entry at 'name' found */ hid_t ret_value = FAIL; FUNC_ENTER_API(H5Oopen, FAIL) H5TRACE3("i","isi",loc_id,name,lapl_id); /* Check args */ if(H5G_loc(loc_id, &loc) < 0) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a location") if(!name || !*name) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "no name") /* Set up opened group location to fill in */ obj_loc.oloc = &obj_oloc; obj_loc.path = &obj_path; H5G_loc_reset(&obj_loc); /* Find the object's location */ if(H5G_loc_find(&loc, name, &obj_loc/*out*/, lapl_id, H5AC_dxpl_id) < 0) HGOTO_ERROR(H5E_SYM, H5E_NOTFOUND, FAIL, "object not found") loc_found = TRUE; /* Open the object */ if((ret_value = H5O_open_by_loc(&obj_loc, H5AC_dxpl_id)) < 0) HGOTO_ERROR(H5E_SYM, H5E_CANTOPENOBJ, FAIL, "unable to open object") done: if(ret_value < 0 && loc_found) if(H5G_loc_free(&obj_loc) < 0) HDONE_ERROR(H5E_SYM, H5E_CANTRELEASE, FAIL, "can't free location") FUNC_LEAVE_API(ret_value) } /* end H5Oopen() */ /*------------------------------------------------------------------------- * Function: H5Oopen_by_idx * * Purpose: Opens an object within an HDF5 file, according to the offset * within an index. * * This function opens an object in the same way that H5Gopen, * H5Topen, and H5Dopen do. However, H5Oopen doesn't require * the type of object to be known beforehand. This can be * useful in user-defined links, for instance, when only a * path is known. * * The opened object should be closed again with H5Oclose * or H5Gclose, H5Tclose, or H5Dclose. * * Return: Success: An open object identifier * Failure: Negative * * Programmer: Quincey Koziol * November 20 2006 * *------------------------------------------------------------------------- */ hid_t H5Oopen_by_idx(hid_t loc_id, const char *group_name, H5L_index_t idx_type, H5_iter_order_t order, hsize_t n, hid_t lapl_id) { H5G_loc_t loc; H5G_loc_t obj_loc; /* Location used to open group */ H5G_name_t obj_path; /* Opened object group hier. path */ H5O_loc_t obj_oloc; /* Opened object object location */ hbool_t loc_found = FALSE; /* Entry at 'name' found */ hid_t ret_value = FAIL; FUNC_ENTER_API(H5Oopen_by_idx, FAIL) H5TRACE6("i","isLiIohi",loc_id,group_name,idx_type,order,n,lapl_id); /* Check args */ if(H5G_loc(loc_id, &loc) < 0) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a location") if(!group_name || !*group_name) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "no name specified") if(idx_type <= H5L_INDEX_UNKNOWN || idx_type >= H5L_INDEX_N) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid index type specified") if(order <= H5_ITER_UNKNOWN || order >= H5_ITER_N) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid iteration order specified") if(H5P_DEFAULT == lapl_id) lapl_id = H5P_LINK_ACCESS_DEFAULT; else if(TRUE != H5P_isa_class(lapl_id, H5P_LINK_ACCESS)) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not link access property list ID") /* Set up opened group location to fill in */ obj_loc.oloc = &obj_oloc; obj_loc.path = &obj_path; H5G_loc_reset(&obj_loc); /* Find the object's location, according to the order in the index */ if(H5G_loc_find_by_idx(&loc, group_name, idx_type, order, n, &obj_loc/*out*/, lapl_id, H5AC_dxpl_id) < 0) HGOTO_ERROR(H5E_SYM, H5E_NOTFOUND, FAIL, "group not found") loc_found = TRUE; /* Open the object */ if((ret_value = H5O_open_by_loc(&obj_loc, H5AC_dxpl_id)) < 0) HGOTO_ERROR(H5E_SYM, H5E_CANTOPENOBJ, FAIL, "unable to open object") done: /* Release the object location if we failed after copying it */ if(ret_value < 0 && loc_found) if(H5G_loc_free(&obj_loc) < 0) HDONE_ERROR(H5E_SYM, H5E_CANTRELEASE, FAIL, "can't free location") FUNC_LEAVE_API(ret_value) } /* end H5Oopen_by_idx() */ /*------------------------------------------------------------------------- * Function: H5Oopen_by_addr * * Purpose: Warning! This function is EXTREMELY DANGEROUS! * Improper use can lead to FILE CORRUPTION, INACCESSIBLE DATA, * and other VERY BAD THINGS! * * This function opens an object using its address within the * HDF5 file, similar to an HDF5 hard link. The open object * is identical to an object opened with H5Oopen() and should * be closed with H5Oclose() or a type-specific closing * function (such as H5Gclose() ). * * This function is very dangerous if called on an invalid * address. For this reason, H5Oincr_refcount() should be * used to prevent HDF5 from deleting any object that is * referenced by address (e.g. by a user-defined link). * H5Odecr_refcount() should be used when the object is * no longer being referenced by address (e.g. when the UD link * is deleted). * * The address of the HDF5 file on disk has no effect on * H5Oopen_by_addr(), nor does the use of any unusual file * drivers. The "address" is really the offset within the * HDF5 file, and HDF5's file drivers will transparently * map this to an address on disk for the filesystem. * * Return: Success: An open object identifier * Failure: Negative * * Programmer: James Laird * July 14 2006 * *------------------------------------------------------------------------- */ hid_t H5Oopen_by_addr(hid_t loc_id, haddr_t addr) { H5G_loc_t loc; H5G_loc_t obj_loc; /* Location used to open group */ H5G_name_t obj_path; /* Opened object group hier. path */ H5O_loc_t obj_oloc; /* Opened object object location */ hbool_t loc_found = FALSE; /* Location at 'name' found */ hid_t ret_value = FAIL; FUNC_ENTER_API(H5Oopen_by_addr, FAIL) H5TRACE2("i","ia",loc_id,addr); /* Check args */ if(H5G_loc(loc_id, &loc) < 0) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a location") if(!H5F_addr_defined(addr)) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "no address supplied") /* Set up opened group location to fill in */ obj_loc.oloc = &obj_oloc; obj_loc.path = &obj_path; H5G_loc_reset(&obj_loc); obj_loc.oloc->addr = addr; obj_loc.oloc->file = loc.oloc->file; H5G_name_reset(obj_loc.path); /* objects opened through this routine don't have a path name */ /* Open the object */ if((ret_value = H5O_open_by_loc(&obj_loc, H5AC_dxpl_id)) < 0) HGOTO_ERROR(H5E_SYM, H5E_CANTOPENOBJ, FAIL, "unable to open object") done: if(ret_value < 0 && loc_found) if(H5G_loc_free(&obj_loc) < 0) HDONE_ERROR(H5E_SYM, H5E_CANTRELEASE, FAIL, "can't free location") FUNC_LEAVE_API(ret_value) } /* end H5Oopen_by_addr() */ /*------------------------------------------------------------------------- * Function: H5Oclose * * Purpose: Close an open file object. * * This is the companion to H5Oopen. It is used to close any * open object in an HDF5 file (but not IDs are that not file * objects, such as property lists and dataspaces). It has * the same effect as calling H5Gclose, H5Dclose, or H5Tclose. * * Return: Success: Non-negative * Failure: Negative * * Programmer: James Laird * July 14 2006 * *------------------------------------------------------------------------- */ herr_t H5Oclose(hid_t object_id) { herr_t ret_value = SUCCEED; FUNC_ENTER_API(H5Oclose, FAIL) H5TRACE1("e","i",object_id); /* Get the type of the object and close it in the correct way */ switch(H5I_get_type(object_id)) { case(H5I_GROUP): case(H5I_DATATYPE): case(H5I_DATASET): if(H5I_object(object_id) == NULL) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "not a valid object") if(H5I_dec_ref(object_id) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTRELEASE, FAIL, "unable to close object") break; default: HGOTO_ERROR(H5E_ARGS, H5E_CANTRELEASE, FAIL, "not a valid file object ID (dataset, group, or datatype)") break; } /* end switch */ done: FUNC_LEAVE_API(ret_value) } /* end H5Oclose() */ /*------------------------------------------------------------------------- * Function: H5Oincr_refcount * * Purpose: Warning! This function is EXTREMELY DANGEROUS! * Improper use can lead to FILE CORRUPTION, INACCESSIBLE DATA, * and other VERY BAD THINGS! * * This function increments the "hard link" reference count * for an object. It should be used when a user-defined link * that references an object by address is created. When the * link is deleted, H5Odecr_refcount should be used. * * Return: Success: Non-negative * Failure: Negative * * Programmer: James Laird * July 14 2006 * *------------------------------------------------------------------------- */ herr_t H5Oincr_refcount(hid_t object_id) { H5O_loc_t *oloc; herr_t ret_value = SUCCEED; FUNC_ENTER_API(H5Oincr_refcount, FAIL) H5TRACE1("e","i",object_id); /* Get the object's oloc so we can adjust its link count */ if((oloc = H5O_get_oloc(object_id)) == NULL) HGOTO_ERROR(H5E_ATOM, H5E_BADVALUE, FAIL, "unable to get object location from ID") if(H5O_link(oloc, 1, H5AC_dxpl_id) < 0) HGOTO_ERROR(H5E_OHDR, H5E_LINKCOUNT, FAIL, "modifying object link count failed") done: FUNC_LEAVE_API(ret_value) } /* end H5O_incr_refcount() */ /*------------------------------------------------------------------------- * Function: H5Odecr_refcount * * Purpose: Warning! This function is EXTREMELY DANGEROUS! * Improper use can lead to FILE CORRUPTION, INACCESSIBLE DATA, * and other VERY BAD THINGS! * * This function decrements the "hard link" reference count * for an object. It should be used when user-defined links * that reference an object by address are deleted, and only * after H5Oincr_refcount has already been used. * * Return: Success: Non-negative * Failure: Negative * * Programmer: James Laird * July 14 2006 * *------------------------------------------------------------------------- */ herr_t H5Odecr_refcount(hid_t object_id) { H5O_loc_t *oloc; herr_t ret_value = SUCCEED; FUNC_ENTER_API(H5Odecr_refcount, FAIL) H5TRACE1("e","i",object_id); /* Get the object's oloc so we can adjust its link count */ if((oloc = H5O_get_oloc(object_id)) == NULL) HGOTO_ERROR(H5E_ATOM, H5E_BADVALUE, FAIL, "unable to get object location from ID") if(H5O_link(oloc, -1, H5AC_dxpl_id) < 0) HGOTO_ERROR(H5E_OHDR, H5E_LINKCOUNT, FAIL, "modifying object link count failed") done: FUNC_LEAVE_API(ret_value) } /* end H5Odecr_refcount() */ /*------------------------------------------------------------------------- * Function: H5Oget_info * * Purpose: Retrieve information about an object. * * Return: Success: Non-negative * Failure: Negative * * Programmer: Quincey Koziol * November 21 2006 * *------------------------------------------------------------------------- */ herr_t H5Oget_info(hid_t loc_id, const char *name, H5O_info_t *oinfo, hid_t lapl_id) { H5G_loc_t loc; /* Location of group */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_API(H5Oget_info, FAIL) /* Check args */ if(H5G_loc(loc_id, &loc) < 0) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a location") if(!name || !*name) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "no name") if(!oinfo) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "no info struct") if(H5P_DEFAULT == lapl_id) lapl_id = H5P_LINK_ACCESS_DEFAULT; else if(TRUE != H5P_isa_class(lapl_id, H5P_LINK_ACCESS)) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not link access property list ID") /* Retrieve the object's information */ if(H5G_loc_info(&loc, name, oinfo/*out*/, lapl_id, H5AC_ind_dxpl_id) < 0) HGOTO_ERROR(H5E_SYM, H5E_NOTFOUND, FAIL, "object not found") done: FUNC_LEAVE_API(ret_value) } /* end H5Oget_info() */ /*------------------------------------------------------------------------- * Function: H5Oget_info_by_idx * * Purpose: Retrieve information about an object, according to the order * of an index. * * Return: Success: Non-negative * Failure: Negative * * Programmer: Quincey Koziol * November 26 2006 * *------------------------------------------------------------------------- */ herr_t H5Oget_info_by_idx(hid_t loc_id, const char *group_name, H5L_index_t idx_type, H5_iter_order_t order, hsize_t n, H5O_info_t *oinfo, hid_t lapl_id) { H5G_loc_t loc; /* Location of group */ H5G_loc_t obj_loc; /* Location used to open group */ H5G_name_t obj_path; /* Opened object group hier. path */ H5O_loc_t obj_oloc; /* Opened object object location */ hbool_t loc_found = FALSE; /* Entry at 'name' found */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_API(H5Oget_info_by_idx, FAIL) /* Check args */ if(H5G_loc(loc_id, &loc) < 0) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a location") if(!group_name || !*group_name) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "no name specified") if(idx_type <= H5L_INDEX_UNKNOWN || idx_type >= H5L_INDEX_N) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid index type specified") if(order <= H5_ITER_UNKNOWN || order >= H5_ITER_N) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid iteration order specified") if(!oinfo) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "no info struct") if(H5P_DEFAULT == lapl_id) lapl_id = H5P_LINK_ACCESS_DEFAULT; else if(TRUE != H5P_isa_class(lapl_id, H5P_LINK_ACCESS)) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not link access property list ID") /* Set up opened group location to fill in */ obj_loc.oloc = &obj_oloc; obj_loc.path = &obj_path; H5G_loc_reset(&obj_loc); /* Find the object's location, according to the order in the index */ if(H5G_loc_find_by_idx(&loc, group_name, idx_type, order, n, &obj_loc/*out*/, lapl_id, H5AC_ind_dxpl_id) < 0) HGOTO_ERROR(H5E_SYM, H5E_NOTFOUND, FAIL, "group not found") loc_found = TRUE; /* Retrieve the object's information */ if(H5O_get_info(obj_loc.oloc, oinfo, H5AC_ind_dxpl_id) < 0) HGOTO_ERROR(H5E_SYM, H5E_CANTGET, FAIL, "can't retrieve object info") done: /* Release the object location */ if(loc_found && H5G_loc_free(&obj_loc) < 0) HDONE_ERROR(H5E_SYM, H5E_CANTRELEASE, FAIL, "can't free location") FUNC_LEAVE_API(ret_value) } /* end H5Oget_info_by_idx() */ /*------------------------------------------------------------------------- * Function: H5O_open_by_loc * * Purpose: Opens an object and returns an ID given its group loction. * * Return: Success: Open object identifier * Failure: Negative * * Programmer: James Laird * July 25 2006 * *------------------------------------------------------------------------- */ static hid_t H5O_open_by_loc(H5G_loc_t *obj_loc, hid_t dxpl_id) { const H5O_obj_class_t *obj_class; /* Class of object for location */ hid_t ret_value; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5O_open_by_loc) HDassert(obj_loc); /* Get the object class for this location */ if(NULL == (obj_class = H5O_obj_class(obj_loc->oloc, dxpl_id))) HGOTO_ERROR(H5E_OHDR, H5E_CANTGET, FAIL, "unable to determine object class") /* Call the object class's 'open' routine */ HDassert(obj_class->open); if((ret_value = obj_class->open(obj_loc, dxpl_id)) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTOPENOBJ, FAIL, "unable to open object") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_open_by_loc() */ /*------------------------------------------------------------------------- * Function: H5O_get_oloc * * Purpose: Gets the oloc for an object given its ID. * * Return: Success: Pointer to H5O_loc_t * Failure: NULL * * Programmer: James Laird * July 25 2006 * *------------------------------------------------------------------------- */ static H5O_loc_t * H5O_get_oloc(hid_t object_id) { H5O_loc_t *ret_value; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5O_get_oloc) switch(H5I_get_type(object_id)) { case(H5I_GROUP): if(NULL == (ret_value = H5O_OBJ_GROUP->get_oloc(object_id))) HGOTO_ERROR(H5E_OHDR, H5E_CANTGET, NULL, "unable to get object location from group ID") break; case(H5I_DATASET): if(NULL == (ret_value = H5O_OBJ_DATASET->get_oloc(object_id))) HGOTO_ERROR(H5E_OHDR, H5E_CANTGET, NULL, "unable to get object location from dataset ID") break; case(H5I_DATATYPE): if(NULL == (ret_value = H5O_OBJ_DATATYPE->get_oloc(object_id))) HGOTO_ERROR(H5E_OHDR, H5E_CANTGET, NULL, "unable to get object location from datatype ID") break; default: HGOTO_ERROR(H5E_OHDR, H5E_BADTYPE, NULL, "invalid object type") } /* end switch */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_get_oloc() */ /*------------------------------------------------------------------------- * Function: H5O_create * * Purpose: Creates a new object header. Allocates space for it and * then calls an initialization function. The object header * is opened for write access and should eventually be * closed by calling H5O_close(). * * Return: Success: Non-negative, the ENT argument contains * information about the object header, * including its address. * * Failure: Negative * * Programmer: Robb Matzke * matzke@llnl.gov * Aug 5 1997 * *------------------------------------------------------------------------- */ herr_t H5O_create(H5F_t *f, hid_t dxpl_id, size_t size_hint, H5O_loc_t *loc/*out*/) { haddr_t header; /* Address of object header */ herr_t ret_value = SUCCEED; /* return value */ FUNC_ENTER_NOAPI(H5O_create, FAIL) /* check args */ HDassert(f); HDassert(loc); /* Make certain we allocate at least a reasonable size for the object header */ size_hint = H5O_ALIGN_F(f, MAX(H5O_MIN_SIZE, size_hint)); /* allocate disk space for header and first chunk */ if(HADDR_UNDEF == (header = H5MF_alloc(f, H5FD_MEM_OHDR, dxpl_id, (hsize_t)H5O_SIZEOF_HDR_F(f) + size_hint))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "file allocation failed for object header header") /* initialize the object header */ if(H5O_new(f, dxpl_id, size_hint, loc, header) != SUCCEED) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "unable to initialize object header") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_create() */ /*------------------------------------------------------------------------- * Function: H5O_new * * Purpose: Initialize a new object header, sets the link count to 0, * and caches the header. The object header is opened for * write access and should eventually be closed by calling * H5O_close(). * * Return: Success: SUCCEED, the LOC argument contains * information about the object header, * including its address. * Failure: FAIL * * Programmer: Bill Wendling * 1, November 2002 * *------------------------------------------------------------------------- */ static herr_t H5O_new(H5F_t *f, hid_t dxpl_id, size_t chunk_size, H5O_loc_t *loc/*out*/, haddr_t header) { H5O_t *oh = NULL; size_t oh_size; /* Size of initial object header */ herr_t ret_value = SUCCEED; /* return value */ FUNC_ENTER_NOAPI_NOINIT(H5O_new) /* check args */ HDassert(f); HDassert(loc); /* Set up object location */ loc->file = f; loc->addr = header; /* Allocate the object header and fill in header fields */ if(NULL == (oh = H5FL_MALLOC(H5O_t))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed") /* Initialize rudimentary information object object header */ oh->version = H5F_USE_LATEST_FORMAT(f) ? H5O_VERSION_LATEST : H5O_VERSION_1; oh->nlink = 0; oh->skipped_mesg_size = 0; /* Initialize version-specific fields */ if(oh->version > H5O_VERSION_1) { /* Initialize time fields */ oh->atime = oh->mtime = oh->ctime = H5_now(); } /* end if */ /* Compute total size of initial object header */ /* (i.e. object header prefix and first chunk) */ oh_size = H5O_SIZEOF_HDR_OH(oh) + chunk_size; /* Create the chunk list */ oh->nchunks = oh->alloc_nchunks = 1; if(NULL == (oh->chunk = H5FL_SEQ_MALLOC(H5O_chunk_t, (size_t)oh->alloc_nchunks))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed") /* Initialize the first chunk */ oh->chunk[0].dirty = TRUE; oh->chunk[0].addr = loc->addr; oh->chunk[0].size = oh_size; oh->chunk[0].gap = 0; /* Allocate enough space for the first chunk */ /* (including space for serializing the object header prefix */ if(NULL == (oh->chunk[0].image = H5FL_BLK_CALLOC(chunk_image, oh_size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed") /* Put magic # for object header in first chunk */ if(oh->version > H5O_VERSION_1) HDmemcpy(oh->chunk[0].image, H5O_HDR_MAGIC, (size_t)H5O_SIZEOF_MAGIC); /* Create the message list */ oh->nmesgs = 1; oh->alloc_nmesgs = H5O_NMESGS; if(NULL == (oh->mesg = H5FL_SEQ_CALLOC(H5O_mesg_t, oh->alloc_nmesgs))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed") /* Initialize the first message */ oh->mesg[0].type = H5O_MSG_NULL; oh->mesg[0].dirty = TRUE; oh->mesg[0].native = NULL; oh->mesg[0].raw = oh->chunk[0].image + (H5O_SIZEOF_HDR_OH(oh) - H5O_SIZEOF_CHKSUM_OH(oh)) + H5O_SIZEOF_MSGHDR_OH(oh); oh->mesg[0].raw_size = chunk_size - H5O_SIZEOF_MSGHDR_OH(oh); oh->mesg[0].chunkno = 0; /* Cache object header */ if(H5AC_set(f, dxpl_id, H5AC_OHDR, loc->addr, oh, H5AC__NO_FLAGS_SET) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "unable to cache object header") /* Open it */ if(H5O_open(loc) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTOPENOBJ, FAIL, "unable to open object header") done: if(ret_value < 0 && oh) { if(H5O_dest(f, oh) < 0) HDONE_ERROR(H5E_OHDR, H5E_CANTFREE, FAIL, "unable to destroy object header data") } /* end if */ FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_new() */ /*------------------------------------------------------------------------- * Function: H5O_open * * Purpose: Opens an object header which is described by the symbol table * entry OBJ_ENT. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Monday, January 5, 1998 * *------------------------------------------------------------------------- */ herr_t H5O_open(const H5O_loc_t *loc) { FUNC_ENTER_NOAPI_NOFUNC(H5O_open) /* Check args */ HDassert(loc); HDassert(loc->file); #ifdef H5O_DEBUG if (H5DEBUG(O)) HDfprintf(H5DEBUG(O), "> %a\n", loc->addr); #endif /* Increment open-lock counters */ loc->file->nopen_objs++; FUNC_LEAVE_NOAPI(SUCCEED) } /* end H5O_open() */ /*------------------------------------------------------------------------- * Function: H5O_close * * Purpose: Closes an object header that was previously open. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Monday, January 5, 1998 * *------------------------------------------------------------------------- */ herr_t H5O_close(H5O_loc_t *loc) { herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5O_close, FAIL) /* Check args */ HDassert(loc); HDassert(loc->file); HDassert(loc->file->nopen_objs > 0); /* Decrement open-lock counters */ --loc->file->nopen_objs; #ifdef H5O_DEBUG if(H5DEBUG(O)) { if(loc->file->file_id < 0 && 1 == loc->file->shared->nrefs) HDfprintf(H5DEBUG(O), "< %a auto %lu remaining\n", loc->addr, (unsigned long)(loc->file->nopen_objs)); else HDfprintf(H5DEBUG(O), "< %a\n", loc->addr); } /* end if */ #endif /* * If the file open object count has reached the number of open mount points * (each of which has a group open in the file) attempt to close the file. */ if(loc->file->nopen_objs == loc->file->mtab.nmounts) /* Attempt to close down the file hierarchy */ if(H5F_try_close(loc->file) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTCLOSEFILE, FAIL, "problem attempting file close") /* Release location information */ if(H5O_loc_free(loc) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTRELEASE, FAIL, "problem attempting to free location") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_close() */ /*------------------------------------------------------------------------- * Function: H5O_reset * * Purpose: Some message data structures have internal fields that * need to be freed. This function does that if appropriate * but doesn't free NATIVE. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * matzke@llnl.gov * Aug 12 1997 * * Modifications: * Changed to use IDs for types, instead of type objects, then * call "real" routine. * Quincey Koziol * Feb 14 2003 * *------------------------------------------------------------------------- */ herr_t H5O_reset(unsigned type_id, void *native) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5O_reset, FAIL) /* check args */ HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); /* Call the "real" reset routine */ if(H5O_reset_real(type, native) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTRESET, FAIL, "unable to reset object header") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_reset() */ /*------------------------------------------------------------------------- * Function: H5O_reset_real * * Purpose: Some message data structures have internal fields that * need to be freed. This function does that if appropriate * but doesn't free NATIVE. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * matzke@llnl.gov * Aug 12 1997 * *------------------------------------------------------------------------- */ static herr_t H5O_reset_real(const H5O_msg_class_t *type, void *native) { herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5O_reset_real) /* check args */ HDassert(type); if(native) { if(type->reset) { if((type->reset)(native) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTRELEASE, FAIL, "reset method failed") } else HDmemset(native, 0, type->native_size); } /* end if */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_reset_real() */ /*------------------------------------------------------------------------- * Function: H5O_free * * Purpose: Similar to H5O_reset() except it also frees the message * pointer. * * Return: Success: NULL * * Failure: NULL * * Programmer: Robb Matzke * Thursday, May 21, 1998 * * Modifications: * *------------------------------------------------------------------------- */ void * H5O_free(unsigned type_id, void *mesg) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ void * ret_value; /* Return value */ FUNC_ENTER_NOAPI_NOFUNC(H5O_free) /* check args */ HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); /* Call the "real" free routine */ ret_value = H5O_free_real(type, mesg); FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_free() */ /*------------------------------------------------------------------------- * Function: H5O_free_mesg * * Purpose: Call H5O_free_real() on a message. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Tuesday, Sep 6, 2005 * *------------------------------------------------------------------------- */ herr_t H5O_free_mesg(H5O_mesg_t *mesg) { FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5O_free_mesg) /* check args */ HDassert(mesg); /* Free any native information */ if(mesg->flags & H5O_FLAG_SHARED) mesg->native = H5O_free_real(H5O_MSG_SHARED, mesg->native); else mesg->native = H5O_free_real(mesg->type, mesg->native); FUNC_LEAVE_NOAPI(SUCCEED) } /* end H5O_free_mesg() */ /*------------------------------------------------------------------------- * Function: H5O_free_real * * Purpose: Similar to H5O_reset() except it also frees the message * pointer. * * Return: Success: NULL * * Failure: NULL * * Programmer: Robb Matzke * Thursday, May 21, 1998 * *------------------------------------------------------------------------- */ void * H5O_free_real(const H5O_msg_class_t *type, void *msg_native) { FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5O_free_real) /* check args */ HDassert(type); if(msg_native) { H5O_reset_real(type, msg_native); if (NULL!=(type->free)) (type->free)(msg_native); else H5MM_xfree(msg_native); } /* end if */ FUNC_LEAVE_NOAPI(NULL) } /* end H5O_free_real() */ /*------------------------------------------------------------------------- * Function: H5O_copy * * Purpose: Copies a message. If MESG is is the null pointer then a null * pointer is returned with no error. * * Return: Success: Ptr to the new message * * Failure: NULL * * Programmer: Robb Matzke * Thursday, May 21, 1998 * * Modifications: * Changed to use IDs for types, instead of type objects, then * call "real" routine. * Quincey Koziol * Feb 14 2003 * *------------------------------------------------------------------------- */ void * H5O_copy (unsigned type_id, const void *mesg, void *dst) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ void *ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_copy, NULL) /* check args */ HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); /* Call the "real" copy routine */ if((ret_value = H5O_copy_real(type, mesg, dst)) == NULL) HGOTO_ERROR(H5E_OHDR, H5E_CANTCOPY, NULL, "unable to copy object header message") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_copy() */ /*------------------------------------------------------------------------- * Function: H5O_copy_real * * Purpose: Copies a message. If MESG is is the null pointer then a null * pointer is returned with no error. * * Return: Success: Ptr to the new message * * Failure: NULL * * Programmer: Robb Matzke * Thursday, May 21, 1998 * *------------------------------------------------------------------------- */ static void * H5O_copy_real(const H5O_msg_class_t *type, const void *mesg, void *dst) { void *ret_value = NULL; FUNC_ENTER_NOAPI_NOINIT(H5O_copy_real) /* check args */ HDassert(type); HDassert(type->copy); if(mesg) if(NULL == (ret_value = (type->copy)(mesg, dst, 0))) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, NULL, "unable to copy object header message") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_copy_real() */ /*------------------------------------------------------------------------- * Function: H5O_link * * Purpose: Adjust the link count for an object header by adding * ADJUST to the link count. * * Return: Success: New link count * * Failure: Negative * * Programmer: Robb Matzke * matzke@llnl.gov * Aug 5 1997 * *------------------------------------------------------------------------- */ int H5O_link(const H5O_loc_t *loc, int adjust, hid_t dxpl_id) { H5O_t *oh = NULL; unsigned oh_flags = H5AC__NO_FLAGS_SET; /* used to indicate whether the * object was deleted as a result * of this action. */ int ret_value = FAIL; FUNC_ENTER_NOAPI(H5O_link, FAIL) /* check args */ HDassert(loc); HDassert(loc->file); HDassert(H5F_addr_defined(loc->addr)); if(adjust != 0 && 0 == (loc->file->intent & H5F_ACC_RDWR)) HGOTO_ERROR(H5E_OHDR, H5E_WRITEERROR, FAIL, "no write intent on file") /* get header */ if(NULL == (oh = H5AC_protect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, NULL, NULL, H5AC_WRITE))) HGOTO_ERROR(H5E_OHDR, H5E_CANTLOAD, FAIL, "unable to load object header") /* adjust link count */ if(adjust < 0) { /* Check for too large of an adjustment */ if((unsigned)(-adjust) > oh->nlink) HGOTO_ERROR(H5E_OHDR, H5E_LINKCOUNT, FAIL, "link count would be negative") oh->nlink += adjust; oh_flags |= H5AC__DIRTIED_FLAG; /* Check if the object should be deleted */ if(oh->nlink == 0) { /* Check if the object is still open by the user */ if(H5FO_opened(loc->file, loc->addr) != NULL) { /* Flag the object to be deleted when it's closed */ if(H5FO_mark(loc->file, loc->addr, TRUE) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTDELETE, FAIL, "can't mark object for deletion") } /* end if */ else { /* Delete object right now */ if(H5O_delete_oh(loc->file, dxpl_id, oh) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTDELETE, FAIL, "can't delete object from file") /* Mark the object header as deleted */ oh_flags = H5C__DELETED_FLAG; } /* end else */ } /* end if */ } else if (adjust > 0) { /* A new object, or one that will be deleted */ if(oh->nlink == 0) { /* Check if the object is current open, but marked for deletion */ if(H5FO_marked(loc->file, loc->addr) > 0) { /* Remove "delete me" flag on the object */ if(H5FO_mark(loc->file, loc->addr, FALSE) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTDELETE, FAIL, "can't mark object for deletion") } /* end if */ } /* end if */ oh->nlink += adjust; oh_flags |= H5AC__DIRTIED_FLAG; } /* end if */ /* Set return value */ ret_value = oh->nlink; done: if (oh && H5AC_unprotect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, oh, oh_flags) < 0) HDONE_ERROR(H5E_OHDR, H5E_PROTECT, FAIL, "unable to release object header") FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_link() */ /*------------------------------------------------------------------------- * Function: H5O_count * * Purpose: Counts the number of messages in an object header which are a * certain type. * * Return: Success: Number of messages of specified type. * * Failure: Negative * * Programmer: Robb Matzke * Tuesday, April 21, 1998 * *------------------------------------------------------------------------- */ int H5O_count(H5O_loc_t *loc, unsigned type_id, hid_t dxpl_id) { H5O_t *oh = NULL; /* Object header to operate on */ const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ int acc; /* Count of the message type found */ unsigned u; /* Local index variable */ int ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_count, FAIL) /* Check args */ HDassert(loc); HDassert(loc->file); HDassert(H5F_addr_defined(loc->addr)); HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); /* Load the object header */ if(NULL == (oh = H5AC_protect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, NULL, NULL, H5AC_READ))) HGOTO_ERROR(H5E_OHDR, H5E_CANTLOAD, FAIL, "unable to load object header") /* Loop over all messages, counting the ones of the type looked for */ for(u = acc = 0; u < oh->nmesgs; u++) if(oh->mesg[u].type == type) acc++; /* Set return value */ ret_value = acc; done: if(oh && H5AC_unprotect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, oh, H5AC__NO_FLAGS_SET) < 0) HDONE_ERROR(H5E_OHDR, H5E_PROTECT, FAIL, "unable to release object header") FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_count() */ /*------------------------------------------------------------------------- * Function: H5O_exists * * Purpose: Determines if a particular message exists in an object * header without trying to decode the message. * * Return: Success: FALSE if the message does not exist; TRUE if * th message exists. * * Failure: FAIL if the existence of the message could * not be determined due to some error such as * not being able to read the object header. * * Programmer: Robb Matzke * Monday, November 2, 1998 * *------------------------------------------------------------------------- */ htri_t H5O_exists(H5O_loc_t *loc, unsigned type_id, int sequence, hid_t dxpl_id) { H5O_t *oh = NULL; /* Object header for location */ htri_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_exists, FAIL) HDassert(loc); HDassert(loc->file); HDassert(type_id < NELMTS(H5O_msg_class_g)); HDassert(sequence >= 0); /* Load the object header */ if(NULL == (oh = H5AC_protect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, NULL, NULL, H5AC_READ))) HGOTO_ERROR(H5E_OHDR, H5E_CANTLOAD, FAIL, "unable to load object header") /* Call the "real" exists routine */ if((ret_value = H5O_exists_oh(oh, type_id, sequence)) < 0) HGOTO_ERROR(H5E_OHDR, H5E_READERROR, FAIL, "unable to verify object header message") done: if(oh && H5AC_unprotect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, oh, H5AC__NO_FLAGS_SET) != SUCCEED) HDONE_ERROR(H5E_OHDR, H5E_PROTECT, FAIL, "unable to release object header") FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_exists() */ /*------------------------------------------------------------------------- * Function: H5O_exists_oh * * Purpose: Determines if a particular message exists in an object * header without trying to decode the message. * * Return: Success: FALSE if the message does not exist; TRUE if * th message exists. * * Failure: FAIL if the existence of the message could * not be determined due to some error such as * not being able to read the object header. * * Programmer: Robb Matzke * Monday, November 2, 1998 * *------------------------------------------------------------------------- */ htri_t H5O_exists_oh(H5O_t *oh, unsigned type_id, int sequence) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ unsigned u; /* Local index variable */ htri_t ret_value; /* Return value */ FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5O_exists_oh) HDassert(oh); HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); HDassert(sequence >= 0); /* Scan through the messages looking for the right one */ for(u = 0; u < oh->nmesgs; u++) { if(type->id != oh->mesg[u].type->id) continue; if(--sequence < 0) break; } /* end for */ /* Set return value */ ret_value = (sequence < 0); FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_exists_oh() */ /*------------------------------------------------------------------------- * Function: H5O_read * * Purpose: Reads a message from an object header and returns a pointer * to it. The caller will usually supply the memory through * MESG and the return value will be MESG. But if MESG is * the null pointer, then this function will malloc() memory * to hold the result and return its pointer instead. * * Return: Success: Ptr to message in native format. The message * should be freed by calling H5O_reset(). If * MESG is a null pointer then the caller should * also call H5MM_xfree() on the return value * after calling H5O_reset(). * * Failure: NULL * * Programmer: Robb Matzke * matzke@llnl.gov * Aug 6 1997 * *------------------------------------------------------------------------- */ void * H5O_read(const H5O_loc_t *loc, unsigned type_id, int sequence, void *mesg, hid_t dxpl_id) { H5O_t *oh = NULL; /* Object header to use */ void *ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_read, NULL) /* check args */ HDassert(loc); HDassert(loc->file); HDassert(H5F_addr_defined(loc->addr)); HDassert(type_id < NELMTS(H5O_msg_class_g)); HDassert(sequence >= 0); /* Get the object header */ if(NULL == (oh = H5AC_protect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, NULL, NULL, H5AC_READ))) HGOTO_ERROR(H5E_OHDR, H5E_CANTLOAD, NULL, "unable to load object header") /* Call the "real" read routine */ if((ret_value = H5O_read_real(loc->file, oh, type_id, sequence, mesg, dxpl_id)) == NULL) HGOTO_ERROR(H5E_OHDR, H5E_READERROR, NULL, "unable to load object header") done: if(oh && H5AC_unprotect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, oh, H5AC__NO_FLAGS_SET) < 0) HDONE_ERROR(H5E_OHDR, H5E_PROTECT, NULL, "unable to release object header") FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_read() */ /*------------------------------------------------------------------------- * Function: H5O_read_real * * Purpose: Reads a message from an object header and returns a pointer * to it. The caller will usually supply the memory through * MESG and the return value will be MESG. But if MESG is * the null pointer, then this function will malloc() memory * to hold the result and return its pointer instead. * * Return: Success: Ptr to message in native format. The message * should be freed by calling H5O_reset(). If * MESG is a null pointer then the caller should * also call H5MM_xfree() on the return value * after calling H5O_reset(). * * Failure: NULL * * Programmer: Robb Matzke * matzke@llnl.gov * Aug 6 1997 * *------------------------------------------------------------------------- */ static void * H5O_read_real(H5F_t *f, H5O_t *oh, unsigned type_id, int sequence, void *mesg, hid_t dxpl_id) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ int idx; void *ret_value = NULL; FUNC_ENTER_NOAPI_NOINIT(H5O_read_real) /* check args */ HDassert(f); HDassert(oh); HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); HDassert(sequence >= 0); /* can we get it from the object header? */ if((idx = H5O_find_in_ohdr(f, dxpl_id, oh, &type, sequence)) < 0) HGOTO_ERROR(H5E_OHDR, H5E_NOTFOUND, NULL, "unable to find message in object header") if(oh->mesg[idx].flags & H5O_FLAG_SHARED) { /* * If the message is shared then then the native pointer points to an * H5O_MSG_SHARED message. We use that information to look up the real * message in the global heap or some other object header. */ H5O_shared_t *shared; shared = (H5O_shared_t *)(oh->mesg[idx].native); ret_value = H5O_shared_read(f, dxpl_id, shared, type, mesg); } else { /* * The message is not shared, but rather exists in the object * header. The object header caches the native message (along with * the raw message) so we must copy the native message before * returning. */ if(NULL == (ret_value = (type->copy)(oh->mesg[idx].native, mesg, 0))) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, NULL, "unable to copy message to user space") } /* end else */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_read_real() */ /*------------------------------------------------------------------------- * Function: H5O_find_in_ohdr * * Purpose: Find a message in the object header without consulting * a symbol table entry. * * Return: Success: Index number of message. * Failure: Negative * * Programmer: Robb Matzke * matzke@llnl.gov * Aug 6 1997 * * Modifications: * Robb Matzke, 1999-07-28 * The ADDR argument is passed by value. * * Bill Wendling, 2003-09-30 * Modified so that the object header needs to be AC_protected * before calling this function. *------------------------------------------------------------------------- */ static unsigned H5O_find_in_ohdr(H5F_t *f, hid_t dxpl_id, H5O_t *oh, const H5O_msg_class_t **type_p, int sequence) { unsigned u; unsigned ret_value; FUNC_ENTER_NOAPI_NOINIT(H5O_find_in_ohdr) /* Check args */ HDassert(f); HDassert(oh); HDassert(type_p); /* Scan through the messages looking for the right one */ for(u = 0; u < oh->nmesgs; u++) { if(*type_p && (*type_p)->id != oh->mesg[u].type->id) continue; if(--sequence < 0) break; } /* end for */ if(sequence >= 0) HGOTO_ERROR(H5E_OHDR, H5E_NOTFOUND, UFAIL, "unable to find object header message") /* * Decode the message if necessary. If the message is shared then decode * a shared message, ignoring the message type. */ LOAD_NATIVE(f, dxpl_id, &(oh->mesg[u]), UFAIL) /* * Return the message type. If this is a shared message then return the * pointed-to type. */ *type_p = oh->mesg[u].type; /* Set return value */ ret_value = u; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_find_in_ohdr() */ /*------------------------------------------------------------------------- * Function: H5O_modify * * Purpose: Modifies an existing message or creates a new message. * The cache fields in that symbol table entry ENT are *not* * updated, you must do that separately because they often * depend on multiple object header messages. Besides, we * don't know which messages will be constant and which will * not. * * The OVERWRITE argument is either a sequence number of a * message to overwrite (usually zero) or the constant * H5O_NEW_MESG (-1) to indicate that a new message is to * be created. If the message to overwrite doesn't exist then * it is created (but only if it can be inserted so its sequence * number is OVERWRITE; that is, you can create a message with * the sequence number 5 if there is no message with sequence * number 4). * * The UPDATE_TIME argument is a boolean that allows the caller * to skip updating the modification time. This is useful when * several calls to H5O_modify will be made in a sequence. * * Return: Success: The sequence number of the message that * was modified or created. * * Failure: Negative * * Programmer: Robb Matzke * matzke@llnl.gov * Aug 6 1997 * *------------------------------------------------------------------------- */ /* JAMES: this will probably get put through its paces when extending shared * dataspaces */ int H5O_modify(H5O_loc_t *loc, unsigned type_id, int overwrite, unsigned flags, unsigned update_flags, void *mesg, hid_t dxpl_id) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ htri_t shared_mess; int ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_modify, FAIL) /* check args */ HDassert(loc); HDassert(loc->file); HDassert(H5F_addr_defined(loc->addr)); HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); HDassert(mesg); HDassert(0 == (flags & ~H5O_FLAG_BITS)); /* Should this message be written as a SOHM? */ if((shared_mess = H5SM_try_share(loc->file, dxpl_id, type_id, mesg)) >0) { /* Mark the message as shared */ flags |= H5O_FLAG_SHARED; } else if(shared_mess < 0) HGOTO_ERROR(H5E_OHDR, H5E_BADMESG, FAIL, "error while trying to share message"); /* Call the "real" modify routine */ if((ret_value = H5O_modify_real(loc, type, overwrite, flags, update_flags, mesg, dxpl_id)) < 0) HGOTO_ERROR(H5E_OHDR, H5E_WRITEERROR, FAIL, "unable to write object header message") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_modify() */ /*------------------------------------------------------------------------- * Function: H5O_modify_real * * Purpose: Modifies an existing message or creates a new message. * The cache fields in that symbol table entry ENT are *not* * updated, you must do that separately because they often * depend on multiple object header messages. Besides, we * don't know which messages will be constant and which will * not. * * The OVERWRITE argument is either a sequence number of a * message to overwrite (usually zero) or the constant * H5O_NEW_MESG (-1) to indicate that a new message is to * be created. If the message to overwrite doesn't exist then * it is created (but only if it can be inserted so its sequence * number is OVERWRITE; that is, you can create a message with * the sequence number 5 if there is no message with sequence * number 4). * * The UPDATE_TIME argument is a boolean that allows the caller * to skip updating the modification time. This is useful when * several calls to H5O_modify will be made in a sequence. * * Return: Success: The sequence number of the message that * was modified or created. * * Failure: Negative * * Programmer: Robb Matzke * matzke@llnl.gov * Aug 6 1997 * *------------------------------------------------------------------------- */ static int H5O_modify_real(H5O_loc_t *loc, const H5O_msg_class_t *type, int overwrite, unsigned flags, unsigned update_flags, const void *mesg, hid_t dxpl_id) { H5O_t *oh = NULL; unsigned oh_flags = H5AC__NO_FLAGS_SET; int sequence; unsigned idx; /* Index of message to modify */ H5O_mesg_t *idx_msg; /* Pointer to message to modify */ H5O_shared_t sh_mesg; const H5O_msg_class_t *write_type = type; /* Type of message to be written */ const void *write_mesg = mesg; /* Actual message being written */ int ret_value; FUNC_ENTER_NOAPI_NOINIT(H5O_modify_real) /* check args */ HDassert(loc); HDassert(loc->file); HDassert(H5F_addr_defined(loc->addr)); HDassert(type); HDassert(mesg); HDassert(0 == (flags & ~H5O_FLAG_BITS)); /* Check for write access on the file */ if(0 == (loc->file->intent & H5F_ACC_RDWR)) HGOTO_ERROR(H5E_OHDR, H5E_WRITEERROR, FAIL, "no write intent on file") /* Protect the object header */ if(NULL == (oh = H5AC_protect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, NULL, NULL, H5AC_WRITE))) HGOTO_ERROR(H5E_OHDR, H5E_CANTLOAD, FAIL, "unable to load object header") /* Count similar messages */ for(idx = 0, sequence = -1, idx_msg=&oh->mesg[0]; idx < oh->nmesgs; idx++, idx_msg++) { if(type->id != idx_msg->type->id) continue; if(++sequence == overwrite) break; } /* end for */ /* Was the right message found? */ if(overwrite >= 0 && (idx >= oh->nmesgs || sequence != overwrite)) { /* No, but can we insert a new one with this sequence number? */ if(overwrite == sequence + 1) overwrite = -1; else HGOTO_ERROR(H5E_OHDR, H5E_NOTFOUND, FAIL, "message not found") } /* end if */ /* Check for creating new message */ if(overwrite < 0) { /* Create a new message */ /* JAMES: why is sh_mesg passed in here? Is it ever used? */ if((idx = H5O_new_mesg(loc->file, oh, &flags, type, mesg, &sh_mesg, &type, &mesg, dxpl_id, &oh_flags)) == UFAIL) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "unable to create new message") /* Set the correct sequence number for the message created */ sequence++; } else if(oh->mesg[idx].flags & H5O_FLAG_CONSTANT) { HGOTO_ERROR(H5E_OHDR, H5E_WRITEERROR, FAIL, "unable to modify constant message") } else if(oh->mesg[idx].flags & H5O_FLAG_SHARED) { /* This message is shared, but it's being modified. This is valid if * it's shared in the heap . * First, make sure it's not a committed message; these can't ever * be modified. */ if(((H5O_shared_t*) oh->mesg[idx].native)->flags & H5O_COMMITTED_FLAG) HGOTO_ERROR(H5E_OHDR, H5E_WRITEERROR, FAIL, "unable to modify committed message") /* Remove the old message from the SOHM index */ if(H5SM_try_delete(loc->file, dxpl_id, oh->mesg[idx].type->id, oh->mesg[idx].native) < 0) HGOTO_ERROR (H5E_OHDR, H5E_CANTFREE, FAIL, "unable to delete message from SOHM table") /* Now this message is no longer shared and we can safely overwrite * it. * We need to make sure that the message we're writing is shared, * though, and that the library doesn't try to reset the current * message like it would in a normal overwrite (this message is * realy a shared pointer, not a real * message). * JAMES: will this break if a shared message is overwritten with a larger * non-shared message? */ HDassert(H5O_is_shared(type->id, mesg) > 0); /* JAMES: this should work with * replacement messages that aren't shared, too. */ if(H5O_get_share(type->id, loc->file, mesg, &sh_mesg)<0) HGOTO_ERROR (H5E_OHDR, H5E_BADMESG, FAIL, "can't get shared message") /* Instead of writing the original message, write a shared message */ write_type = H5O_msg_class_g[H5O_SHARED_ID]; write_mesg = &sh_mesg; } /* Write the information to the message */ if(H5O_write_mesg(oh, idx, write_type, write_mesg, flags, update_flags, &oh_flags) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "unable to write message") /* Update the modification time message if any */ if(update_flags & H5O_UPDATE_TIME) H5O_touch_oh(loc->file, dxpl_id, oh, FALSE, &oh_flags); #ifdef H5O_DEBUG H5O_assert(oh); #endif /* H5O_DEBUG */ /* Set return value */ ret_value = sequence; done: if(oh && H5AC_unprotect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, oh, oh_flags) < 0) HDONE_ERROR(H5E_OHDR, H5E_PROTECT, FAIL, "unable to release object header") FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_modify_real() */ /*------------------------------------------------------------------------- * Function: H5O_protect * * Purpose: Wrapper around H5AC_protect for use during a H5O_protect-> * H5O_append->...->H5O_append->H5O_unprotect sequence of calls * during an object's creation. * * Return: Success: Pointer to the object header structure for the * object. * * Failure: NULL * * Programmer: Quincey Koziol * koziol@ncsa.uiuc.edu * Dec 31 2002 * *------------------------------------------------------------------------- */ H5O_t * H5O_protect(H5O_loc_t *loc, hid_t dxpl_id) { H5O_t *ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_protect, NULL) /* check args */ HDassert(loc); HDassert(loc->file); HDassert(H5F_addr_defined(loc->addr)); /* Check for write access on the file */ if(0 == (loc->file->intent & H5F_ACC_RDWR)) HGOTO_ERROR(H5E_OHDR, H5E_WRITEERROR, NULL, "no write intent on file") /* Lock the object header into the cache */ if(NULL == (ret_value = H5AC_protect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, NULL, NULL, H5AC_WRITE))) HGOTO_ERROR(H5E_OHDR, H5E_CANTLOAD, NULL, "unable to load object header") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_protect() */ /*------------------------------------------------------------------------- * Function: H5O_unprotect * * Purpose: Wrapper around H5AC_unprotect for use during a H5O_protect-> * H5O_append->...->H5O_append->H5O_unprotect sequence of calls * during an object's creation. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Quincey Koziol * koziol@ncsa.uiuc.edu * Dec 31 2002 * *------------------------------------------------------------------------- */ herr_t H5O_unprotect(H5O_loc_t *loc, H5O_t *oh, hid_t dxpl_id, unsigned oh_flags) { herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5O_unprotect, FAIL) /* check args */ HDassert(loc); HDassert(loc->file); HDassert(H5F_addr_defined(loc->addr)); HDassert(oh); /* Release the object header from the cache */ if(H5AC_unprotect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, oh, oh_flags) < 0) HGOTO_ERROR(H5E_OHDR, H5E_PROTECT, FAIL, "unable to release object header") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_unprotect() */ /*------------------------------------------------------------------------- * Function: H5O_append * * Purpose: Simplified version of H5O_modify, used when creating a new * object header message (usually during object creation) * * Return: Success: The sequence number of the message that * was created. * * Failure: Negative * * Programmer: Quincey Koziol * koziol@ncsa.uiuc.edu * Dec 31 2002 * *------------------------------------------------------------------------- */ int H5O_append(H5F_t *f, hid_t dxpl_id, H5O_t *oh, unsigned type_id, unsigned flags, void *mesg, unsigned * oh_flags_ptr) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ htri_t shared_mess; /* Should this message be stored in the Shared Message table? */ int ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_append, FAIL) /* check args */ HDassert(f); HDassert(oh); HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); HDassert(0 == (flags & ~H5O_FLAG_BITS)); HDassert(mesg); HDassert(oh_flags_ptr); /* Should this message be written as a SOHM? */ if((shared_mess = H5SM_try_share(f, dxpl_id, type_id, mesg)) >0) { /* Mark the message as shared */ flags |= H5O_FLAG_SHARED; } else if(shared_mess < 0) HGOTO_ERROR(H5E_OHDR, H5E_WRITEERROR, FAIL, "error determining if message should be shared"); if((ret_value = H5O_append_real( f, dxpl_id, oh, type, flags, mesg, oh_flags_ptr)) < 0) HGOTO_ERROR(H5E_OHDR, H5E_WRITEERROR, FAIL, "unable to append to object header") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_append() */ /*------------------------------------------------------------------------- * Function: H5O_append_real * * Purpose: Simplified version of H5O_modify, used when creating a new * object header message (usually during object creation) * * Return: Success: The sequence number of the message that * was created. * * Failure: Negative * * Programmer: Quincey Koziol * koziol@ncsa.uiuc.edu * Dec 31 2002 * *------------------------------------------------------------------------- */ static int H5O_append_real(H5F_t *f, hid_t dxpl_id, H5O_t *oh, const H5O_msg_class_t *type, unsigned flags, const void *mesg, unsigned * oh_flags_ptr) { unsigned idx; /* Index of message to modify */ H5O_shared_t sh_mesg; int ret_value; FUNC_ENTER_NOAPI_NOINIT(H5O_append_real) /* check args */ HDassert(f); HDassert(oh); HDassert(type); HDassert(0 == (flags & ~H5O_FLAG_BITS)); HDassert(mesg); HDassert(oh_flags_ptr); /* Create a new message */ if((idx = H5O_new_mesg(f, oh, &flags, type, mesg, &sh_mesg, &type, &mesg, dxpl_id, oh_flags_ptr)) == UFAIL) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "unable to create new message") /* Write the information to the message */ if(H5O_write_mesg(oh, idx, type, mesg, flags, 0, oh_flags_ptr) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "unable to write message") #ifdef H5O_DEBUG H5O_assert(oh); #endif /* H5O_DEBUG */ /* Set return value */ ret_value = idx; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_append_real () */ /*------------------------------------------------------------------------- * Function: H5O_new_mesg * * Purpose: Create a new message in an object header * * Return: Success: Index of message * Failure: Negative * * Programmer: Quincey Koziol * Friday, September 3, 2003 * *------------------------------------------------------------------------- */ static unsigned H5O_new_mesg(H5F_t *f, H5O_t *oh, unsigned *flags, const H5O_msg_class_t *orig_type, const void *orig_mesg, H5O_shared_t *sh_mesg, const H5O_msg_class_t **new_type, const void **new_mesg, hid_t dxpl_id, unsigned * oh_flags_ptr) { size_t size; /* Size of space allocated for object header */ htri_t is_shared; /* Is this a shared message? */ unsigned ret_value = UFAIL; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5O_new_mesg) /* check args */ HDassert(f); HDassert(oh); HDassert(flags); HDassert(orig_type); HDassert(orig_mesg); HDassert(sh_mesg); HDassert(new_mesg); HDassert(new_type); HDassert(oh_flags_ptr); /* Check for shared message */ if(*flags & H5O_FLAG_SHARED) { HDmemset(sh_mesg, 0, sizeof(H5O_shared_t)); if ((NULL == orig_type->is_shared) || (NULL == orig_type->get_share)) HGOTO_ERROR(H5E_OHDR, H5E_UNSUPPORTED, UFAIL, "message class is not sharable"); if ((is_shared = (orig_type->is_shared)(orig_mesg)) == FALSE) { /* * If the message isn't shared then turn off the shared bit * and treat it as an unshared message. */ *flags &= ~H5O_FLAG_SHARED; } else if(is_shared > 0) { /* Message is shared. Get shared message, change message type, * and use shared information */ if ((orig_type->get_share)(f, orig_mesg, sh_mesg/*out*/) < 0) HGOTO_ERROR(H5E_OHDR, H5E_BADMESG, UFAIL, "can't get shared message") *new_type = H5O_MSG_SHARED; *new_mesg = sh_mesg; } else { HGOTO_ERROR(H5E_OHDR, H5E_BADMESG, UFAIL, "can't determine if message is shared") }/* end else */ } /* end if */ else { *new_type = orig_type; *new_mesg = orig_mesg; } /* end else */ /* Compute the size needed to store the message on disk */ if((size = ((*new_type)->raw_size)(f, *new_mesg)) >= H5O_MESG_MAX_SIZE) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, UFAIL, "object header message is too large") /* Allocate space in the object header for the message */ if((ret_value = H5O_alloc(f, dxpl_id, oh, orig_type, size, oh_flags_ptr)) == UFAIL) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, UFAIL, "unable to allocate space for message") /* Increment any links in message */ if((*new_type)->link && ((*new_type)->link)(f, dxpl_id, (*new_mesg)) < 0) HGOTO_ERROR(H5E_OHDR, H5E_LINKCOUNT, UFAIL, "unable to adjust shared object link count") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_new_mesg() */ /*------------------------------------------------------------------------- * Function: H5O_write_mesg * * Purpose: Write message to object header * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Friday, September 3, 2003 * *------------------------------------------------------------------------- */ static herr_t H5O_write_mesg(H5O_t *oh, unsigned idx, const H5O_msg_class_t *type, const void *mesg, unsigned flags, unsigned update_flags, unsigned * oh_flags_ptr) { H5O_mesg_t *idx_msg; /* Pointer to message to modify */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5O_write_mesg) /* check args */ HDassert(oh); HDassert(type); HDassert(mesg); HDassert(oh_flags_ptr); /* Set pointer to the correct message */ idx_msg = &oh->mesg[idx]; /* Reset existing native information */ if(!(update_flags & H5O_UPDATE_DATA_ONLY)) H5O_reset_real(type, idx_msg->native); /* Copy the native value for the message */ if(NULL == (idx_msg->native = (type->copy)(mesg, idx_msg->native, update_flags))) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "unable to copy message to object header") idx_msg->flags = flags; idx_msg->dirty = TRUE; *oh_flags_ptr |= H5AC__DIRTIED_FLAG; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_write_mesg() */ /*------------------------------------------------------------------------- * Function: H5O_touch_oh * * Purpose: If FORCE is non-zero then create a modification time message * unless one already exists. Then update any existing * modification time message with the current time. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Monday, July 27, 1998 * *------------------------------------------------------------------------- */ herr_t H5O_touch_oh(H5F_t *f, hid_t dxpl_id, H5O_t *oh, hbool_t force, unsigned * oh_flags_ptr) { time_t now; /* Current time */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5O_touch_oh) HDassert(oh); HDassert(oh_flags_ptr); /* Get current time */ now = H5_now(); /* Check version, to determine how to store time information */ if(oh->version == H5O_VERSION_1) { unsigned idx; /* Index of modification time message to update */ /* Look for existing message */ for(idx = 0; idx < oh->nmesgs; idx++) if(H5O_MSG_MTIME == oh->mesg[idx].type || H5O_MSG_MTIME_NEW == oh->mesg[idx].type) break; /* Create a new message, if necessary */ if(idx == oh->nmesgs) { size_t size; /* New modification time message size */ /* If we would have to create a new message, but we aren't 'forcing' it, get out now */ if(!force) HGOTO_DONE(SUCCEED); /*nothing to do*/ size = (H5O_MSG_MTIME_NEW->raw_size)(f, &now); if((idx = H5O_alloc(f, dxpl_id, oh, H5O_MSG_MTIME_NEW, size, oh_flags_ptr)) == UFAIL) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "unable to allocate space for modification time message") } /* end if */ /* Allocate 'native' space, if necessary */ if(NULL == oh->mesg[idx].native) { if(NULL == (oh->mesg[idx].native = H5FL_MALLOC(time_t))) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "memory allocation failed for modification time message") } /* end if */ /* Update the message */ *((time_t *)(oh->mesg[idx].native)) = now; /* Mark the message as dirty */ oh->mesg[idx].dirty = TRUE; } /* end if */ else { /* XXX: For now, update access time & change fields in the object header */ /* (will need to add some code to update modification time appropriately) */ oh->atime = oh->ctime = now; } /* end else */ /* Mark the object header as dirty */ *oh_flags_ptr |= H5AC__DIRTIED_FLAG; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_touch_oh() */ /*------------------------------------------------------------------------- * Function: H5O_touch * * Purpose: Touch an object by setting the modification time to the * current time and marking the object as dirty. Unless FORCE * is non-zero, nothing happens if there is no MTIME message in * the object header. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Monday, July 27, 1998 * *------------------------------------------------------------------------- */ herr_t H5O_touch(H5O_loc_t *loc, hbool_t force, hid_t dxpl_id) { H5O_t *oh = NULL; unsigned oh_flags = H5AC__NO_FLAGS_SET; herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5O_touch, FAIL) /* check args */ HDassert(loc); HDassert(loc->file); HDassert(H5F_addr_defined(loc->addr)); if(0 == (loc->file->intent & H5F_ACC_RDWR)) HGOTO_ERROR(H5E_OHDR, H5E_WRITEERROR, FAIL, "no write intent on file") /* Get the object header */ if(NULL == (oh = H5AC_protect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, NULL, NULL, H5AC_WRITE))) HGOTO_ERROR(H5E_OHDR, H5E_CANTLOAD, FAIL, "unable to load object header") /* Create/Update the modification time message */ if(H5O_touch_oh(loc->file, dxpl_id, oh, force, &oh_flags) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "unable to update object modificaton time") done: if(oh && H5AC_unprotect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, oh, oh_flags) < 0) HDONE_ERROR(H5E_OHDR, H5E_PROTECT, FAIL, "unable to release object header") FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_touch() */ #ifdef H5O_ENABLE_BOGUS /*------------------------------------------------------------------------- * Function: H5O_bogus_oh * * Purpose: Create a "bogus" message unless one already exists. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * * Tuesday, January 21, 2003 * *------------------------------------------------------------------------- */ herr_t H5O_bogus_oh(H5F_t *f, hid_t dxpl_id, H5O_t *oh, hbool_t * oh_flags_ptr) { int idx; herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER(H5O_bogus_oh, FAIL) HDassert(f); HDassert(oh); HDassert(oh_flags_ptr); /* Look for existing message */ for(idx = 0; idx < oh->nmesgs; idx++) if(H5O_MSG_BOGUS == oh->mesg[idx].type) break; /* Create a new message */ if(idx == oh->nmesgs) { size_t size = (H5O_MSG_BOGUS->raw_size)(f, NULL); if((idx = H5O_alloc(f, dxpl_id, oh, H5O_MSG_BOGUS, size, oh_flags_ptr)) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "unable to allocate space for 'bogus' message") /* Allocate the native message in memory */ if(NULL == (oh->mesg[idx].native = H5MM_malloc(sizeof(H5O_bogus_t)))) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "memory allocation failed for 'bogus' message") /* Update the native part */ ((H5O_bogus_t *)(oh->mesg[idx].native))->u = H5O_BOGUS_VALUE; /* Mark the message and object header as dirty */ *oh_flags_ptr = TRUE; oh->mesg[idx].dirty = TRUE; oh->dirty = TRUE; } /* end if */ done: FUNC_LEAVE(ret_value) } /* end H5O_bogus_oh() */ /*------------------------------------------------------------------------- * Function: H5O_bogus * * Purpose: Create a "bogus" message in an object. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * * Tuesday, January 21, 2003 * *------------------------------------------------------------------------- */ herr_t H5O_bogus(H5O_loc_t *loc, hid_t dxpl_id) { H5O_t *oh = NULL; unsigned oh_flags = H5AC__NO_FLAGS_SET; herr_t ret_value = SUCCEED; FUNC_ENTER(H5O_bogus, FAIL) /* check args */ HDassert(loc); HDassert(loc->file); HDassert(H5F_addr_defined(loc->addr)); /* Verify write access to the file */ if(0 == (loc->file->intent & H5F_ACC_RDWR)) HGOTO_ERROR(H5E_OHDR, H5E_WRITEERROR, FAIL, "no write intent on file") /* Get the object header */ if(NULL == (oh = H5AC_protect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, NULL, NULL, H5AC_WRITE))) HGOTO_ERROR(H5E_OHDR, H5E_CANTLOAD, FAIL, "unable to load object header") /* Create the "bogus" message */ if(H5O_bogus_oh(ent->file, dxpl_id, oh, &oh_flags) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "unable to update object 'bogus' message") done: if(oh && H5AC_unprotect(ent->file, dxpl_id, H5AC_OHDR, ent->header, oh, oh_flags) < 0) HDONE_ERROR(H5E_OHDR, H5E_PROTECT, FAIL, "unable to release object header") FUNC_LEAVE(ret_value) } /* end H5O_bogus() */ #endif /* H5O_ENABLE_BOGUS */ /*------------------------------------------------------------------------- * Function: H5O_remove * * Purpose: Removes the specified message from the object header. * If sequence is H5O_ALL (-1) then all messages of the * specified type are removed. Removing a message causes * the sequence numbers to change for subsequent messages of * the same type. * * No attempt is made to join adjacent free areas of the * object header into a single larger free area. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * matzke@llnl.gov * Aug 28 1997 * * Modifications: * * Robb Matzke, 7 Jan 1998 * Does not remove constant messages. * * Changed to use IDs for types, instead of type objects, then * call "real" routine. * Quincey Koziol * Feb 14 2003 * *------------------------------------------------------------------------- */ herr_t H5O_remove(H5O_loc_t *loc, unsigned type_id, int sequence, hbool_t adj_link, hid_t dxpl_id) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ herr_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_remove, FAIL) /* check args */ HDassert(loc); HDassert(loc->file); HDassert(H5F_addr_defined(loc->addr)); HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); /* Call the "real" remove routine */ if((ret_value = H5O_remove_real(loc, type, sequence, NULL, NULL, adj_link, dxpl_id)) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTDELETE, FAIL, "unable to remove object header message") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_remove() */ /*------------------------------------------------------------------------- * Function: H5O_remove_op * * Purpose: Removes messages from the object header that a callback * routine indicates should be removed. * * No attempt is made to join adjacent free areas of the * object header into a single larger free area. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * koziol@ncsa.uiuc.edu * Sep 6 2005 * *------------------------------------------------------------------------- */ herr_t H5O_remove_op(const H5O_loc_t *loc, unsigned type_id, int sequence, H5O_operator_t op, void *op_data, hbool_t adj_link, hid_t dxpl_id) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ herr_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_remove_op, FAIL) /* check args */ HDassert(loc); HDassert(loc->file); HDassert(H5F_addr_defined(loc->addr)); HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); /* Call the "real" remove routine */ if((ret_value = H5O_remove_real(loc, type, sequence, op, op_data, adj_link, dxpl_id)) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTDELETE, FAIL, "unable to remove object header message") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_remove_op() */ /*------------------------------------------------------------------------- * Function: H5O_remove_cb * * Purpose: Object header iterator callback routine to remove messages * of a particular type that match a particular sequence number, * or all messages if the sequence number is H5O_ALL (-1). * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * koziol@ncsa.uiuc.edu * Sep 6 2005 * *------------------------------------------------------------------------- */ static herr_t H5O_remove_cb(H5O_t *oh, H5O_mesg_t *mesg/*in,out*/, unsigned sequence, unsigned * oh_flags_ptr, void *_udata/*in,out*/) { H5O_iter_ud1_t *udata = (H5O_iter_ud1_t *)_udata; /* Operator user data */ htri_t try_remove = FALSE; /* Whether to try removing a message */ herr_t ret_value = H5_ITER_CONT; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5O_remove_cb) /* check args */ HDassert(mesg); /* Check for callback routine */ if(udata->op) { /* Call the iterator callback */ if((try_remove = (udata->op)(mesg->native, sequence, udata->op_data)) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTDELETE, H5_ITER_ERROR, "object header message deletion callback failed") } /* end if */ else { /* If there's no callback routine, does the sequence # match? */ if((int)sequence == udata->sequence || H5O_ALL == udata->sequence) try_remove = H5_ITER_STOP; } /* end else */ /* Try removing the message, if indicated */ if(try_remove) { /* * Keep track of how many times we failed trying to remove constant * messages. */ if(mesg->flags & H5O_FLAG_CONSTANT) udata->nfailed++; else { /* Convert message into a null message */ if(H5O_release_mesg(udata->f, udata->dxpl_id, oh, mesg, TRUE, udata->adj_link) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTDELETE, H5_ITER_ERROR, "unable to convert into null message") /* Indicate that the object header was modified */ *oh_flags_ptr |= H5AC__DIRTIED_FLAG; } /* end else */ /* Break out now, if we've found the correct message */ if(udata->sequence == H5O_FIRST || udata->sequence != H5O_ALL) HGOTO_DONE(H5_ITER_STOP) } /* end if */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_remove_cb() */ /*------------------------------------------------------------------------- * Function: H5O_remove_real * * Purpose: Removes the specified message from the object header. * If sequence is H5O_ALL (-1) then all messages of the * specified type are removed. Removing a message causes * the sequence numbers to change for subsequent messages of * the same type. * * No attempt is made to join adjacent free areas of the * object header into a single larger free area. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * matzke@llnl.gov * Aug 28 1997 * *------------------------------------------------------------------------- */ static herr_t H5O_remove_real(const H5O_loc_t *loc, const H5O_msg_class_t *type, int sequence, H5O_operator_t app_op, void *op_data, hbool_t adj_link, hid_t dxpl_id) { H5O_iter_ud1_t udata; /* User data for iterator */ H5O_mesg_operator_t op; /* Wrapper for operator */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5O_remove_real) /* check args */ HDassert(loc); HDassert(loc->file); HDassert(type); /* Make certain we are allowed to modify the file */ if(0 == (loc->file->intent & H5F_ACC_RDWR)) HGOTO_ERROR(H5E_HEAP, H5E_WRITEERROR, FAIL, "no write intent on file") /* Set up iterator operator data */ udata.f = loc->file; udata.dxpl_id = dxpl_id; udata.sequence = sequence; udata.nfailed = 0; udata.op = app_op; udata.op_data = op_data; udata.adj_link = adj_link; /* Iterate over the messages, deleting appropriate one(s) */ op.lib_op = H5O_remove_cb; if(H5O_iterate_real(loc, type, H5AC_WRITE, TRUE, op, &udata, dxpl_id) < 0) HGOTO_ERROR(H5E_SYM, H5E_NOTFOUND, FAIL, "error iterating over messages") /* Fail if we tried to remove any constant messages */ if(udata.nfailed) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "unable to remove constant message(s)") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_remove_real() */ /*------------------------------------------------------------------------- * Function: H5O_raw_size * * Purpose: Call the 'raw_size' method for a * particular class of object header. * * Return: Size of message on success, 0 on failure * * Programmer: Quincey Koziol * koziol@ncsa.uiuc.edu * Feb 13 2003 * *------------------------------------------------------------------------- */ size_t H5O_raw_size(unsigned type_id, const H5F_t *f, const void *mesg) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ size_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_raw_size, 0) /* Check args */ HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); HDassert(type->raw_size); HDassert(f); HDassert(mesg); /* Compute the raw data size for the mesg */ if((ret_value = (type->raw_size)(f, mesg)) == 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTCOUNT, 0, "unable to determine size of message") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_raw_size() */ /*------------------------------------------------------------------------- * Function: H5O_mesg_size * * Purpose: Calculate the final size of an encoded message in an object * header. * * Note: This routine assumes that the message size will be used in the * creation of a new object header. * * Return: Size of message on success, 0 on failure * * Programmer: Quincey Koziol * koziol@ncsa.uiuc.edu * Sep 6 2005 * *------------------------------------------------------------------------- */ size_t H5O_mesg_size(unsigned type_id, const H5F_t *f, const void *mesg, size_t extra_raw) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ size_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_mesg_size, 0) /* Check args */ HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); HDassert(type->raw_size); HDassert(f); HDassert(mesg); /* Compute the raw data size for the mesg */ if((ret_value = (type->raw_size)(f, mesg)) == 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTCOUNT, 0, "unable to determine size of message") /* Add in "extra" raw space */ ret_value += extra_raw; /* Adjust size for alignment, if necessary */ ret_value = H5O_ALIGN_F(f, ret_value); /* Add space for message header */ ret_value += H5O_SIZEOF_MSGHDR_F(f); done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_mesg_size() */ /*------------------------------------------------------------------------- * Function: H5O_get_share * * Purpose: Call the 'get_share' method for a * particular class of object header. * * Return: Success: Non-negative, and SHARE describes the shared * object. * * Failure: Negative * * Programmer: Quincey Koziol * koziol@ncsa.uiuc.edu * Oct 2 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5O_get_share(unsigned type_id, H5F_t *f, const void *mesg, H5O_shared_t *share) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ herr_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_get_share,FAIL) /* Check args */ HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); HDassert(type->get_share); HDassert(f); HDassert(mesg); HDassert(share); /* Get shared data for the mesg */ if((ret_value = (type->get_share)(f, mesg, share)) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTGET, FAIL, "unable to retrieve shared message information") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_get_share() */ /*------------------------------------------------------------------------- * Function: H5O_is_shared * * Purpose: Call the 'is_shared' method for a * particular class of object header. * * Return: Object is shared: TRUE * Object is not shared: FALSE * * Programmer: James Laird * jlaird@ncsa.uiuc.edu * April 5 2006 * * Modifications: * *------------------------------------------------------------------------- */ htri_t H5O_is_shared(unsigned type_id, const void *mesg) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ htri_t ret_value; FUNC_ENTER_NOAPI_NOFUNC(H5O_is_shared) /* Check args */ HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); HDassert(mesg); HDassert(type_id != H5O_SHARED_ID); /* JAMES: check for this mistake elsewhere, too */ /* If there is no is_shared function, then obviously it's not a shared message! */ if( !(type->is_shared)) ret_value = FALSE; else ret_value = (type->is_shared)(mesg); FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_is_shared() */ /*------------------------------------------------------------------------- * Function: H5O_set_share * * Purpose: Set the shared information for an object header message. * * Return: Success: Non-negative * Failure: Negative * * Programmer: James Laird * jlaird@hdfgroup.org * November 1 2006 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5O_set_share(H5F_t *f, H5O_shared_t *share, unsigned type_id, void *mesg) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ herr_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_set_share,FAIL) /* Check args */ HDassert(f); HDassert(share); HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); HDassert(type->set_share); HDassert(mesg); HDassert(share->flags != H5O_NOT_SHARED); /* Set this message as the shared message for the message, wiping out * any information that was there before */ if((ret_value = (type->set_share)(f, mesg, share)) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTSET, FAIL, "unable to set shared message information") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_set_share() */ /*------------------------------------------------------------------------- * Function: H5O_reset_share * * Purpose: Reset the shared information for an object header message. * * Return: Success: Non-negative * Failure: Negative * * Programmer: James Laird * jlaird@hdfgroup.org * Oct 17 2006 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5O_reset_share(H5F_t *f, unsigned type_id, void *mesg) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ H5O_shared_t sh_mesg; /* Shared message */ herr_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_reset_share,FAIL) /* Check args */ HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); HDassert(type->set_share); HDassert(mesg); /* Initialize the shared message to zero. */ HDmemset(&sh_mesg, 0, sizeof(H5O_shared_t)); /* Set this message as the shared message for the message, wiping out * any information that was there before */ if((ret_value = (type->set_share)(f, mesg, &sh_mesg)) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTSET, FAIL, "unable to reset shared message information") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_reset_share() */ /*------------------------------------------------------------------------- * Function: H5O_delete * * Purpose: Delete an object header from a file. This frees the file * space used for the object header (and it's continuation blocks) * and also walks through each header message and asks it to * remove all the pieces of the file referenced by the header. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * koziol@ncsa.uiuc.edu * Mar 19 2003 * *------------------------------------------------------------------------- */ herr_t H5O_delete(H5F_t *f, hid_t dxpl_id, haddr_t addr) { H5O_t *oh = NULL; /* Object header information */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5O_delete,FAIL) /* Check args */ HDassert(f); HDassert(H5F_addr_defined(addr)); /* Get the object header information */ if(NULL == (oh = H5AC_protect(f, dxpl_id, H5AC_OHDR, addr, NULL, NULL, H5AC_WRITE))) HGOTO_ERROR(H5E_OHDR, H5E_CANTLOAD, FAIL, "unable to load object header") /* Delete object */ if(H5O_delete_oh(f, dxpl_id, oh) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTDELETE, FAIL, "can't delete object from file") done: if(oh && H5AC_unprotect(f, dxpl_id, H5AC_OHDR, addr, oh, H5AC__DIRTIED_FLAG | H5C__DELETED_FLAG) < 0) HDONE_ERROR(H5E_OHDR, H5E_PROTECT, FAIL, "unable to release object header") FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_delete() */ /*------------------------------------------------------------------------- * Function: H5O_delete_oh * * Purpose: Internal function to: * Delete an object header from a file. This frees the file * space used for the object header (and it's continuation blocks) * and also walks through each header message and asks it to * remove all the pieces of the file referenced by the header. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * koziol@ncsa.uiuc.edu * Mar 19 2003 * *------------------------------------------------------------------------- */ static herr_t H5O_delete_oh(H5F_t *f, hid_t dxpl_id, H5O_t *oh) { H5O_mesg_t *curr_msg; /* Pointer to current message being operated on */ unsigned u; herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5O_delete_oh) /* Check args */ HDassert(f); HDassert(oh); /* Walk through the list of object header messages, asking each one to * delete any file space used */ for(u = 0, curr_msg = &oh->mesg[0]; u < oh->nmesgs; u++, curr_msg++) { /* Free any space referred to in the file from this message */ if(H5O_delete_mesg(f, dxpl_id, curr_msg, TRUE) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTDELETE, FAIL, "unable to delete file space for object header message") } /* end for */ /* Free main (first) object header "chunk" */ if(H5MF_xfree(f, H5FD_MEM_OHDR, dxpl_id, oh->chunk[0].addr, (hsize_t)oh->chunk[0].size) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTFREE, FAIL, "unable to free object header") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_delete_oh() */ /*------------------------------------------------------------------------- * Function: H5O_delete_mesg * * Purpose: Internal function to: * Delete an object header message from a file. This frees the file * space used for anything referred to in the object header message. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * koziol@ncsa.uiuc.edu * September 26 2003 * *------------------------------------------------------------------------- */ herr_t H5O_delete_mesg(H5F_t *f, hid_t dxpl_id, H5O_mesg_t *mesg, hbool_t adj_link) { const H5O_msg_class_t *type; /* Type of object to free */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5O_delete_mesg, FAIL) /* Check args */ HDassert(f); HDassert(mesg); /* Get the message to free's type */ if(mesg->flags & H5O_FLAG_SHARED) type = H5O_MSG_SHARED; else type = mesg->type; /* Check if there is a file space deletion callback for this type of message */ if(type->del) { /* Decode the message if necessary. */ if(NULL == mesg->native) { HDassert(type->decode); if(NULL == (mesg->native = (type->decode)(f, dxpl_id, mesg->raw))) HGOTO_ERROR(H5E_OHDR, H5E_CANTDECODE, FAIL, "unable to decode message") } /* end if */ /* Check if this message needs to be removed from the SOHM table */ /* JAMES: there should be a callback, maybe in H5O_shared_delete, to fiddle w/ the ref. count. * We shouldn't need to do a search in the SOHM table on delete. */ if(type == H5O_MSG_SHARED) { /* JAMES ugly! And not quite correct. */ void * mesg_orig; if(NULL == (mesg_orig = H5O_shared_read(f, dxpl_id, mesg->native, mesg->type, NULL))) HGOTO_ERROR (H5E_OHDR, H5E_BADMESG, FAIL, "unable to read shared message") if(H5SM_try_delete(f, dxpl_id, mesg->type->id, mesg->native) < 0) HGOTO_ERROR (H5E_OHDR, H5E_CANTFREE, FAIL, "unable to delete message from SOHM table") H5O_free(mesg->type->id, mesg_orig); } if((type->del)(f, dxpl_id, mesg->native, adj_link) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTDELETE, FAIL, "unable to delete file space for object header message") } /* end if */ done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_delete_msg() */ /*------------------------------------------------------------------------- * Function: H5O_encode * * Purpose: Encode an object(data type and simple data space only) * description into a buffer. * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Raymond Lu * slu@ncsa.uiuc.edu * July 13, 2004 * *------------------------------------------------------------------------- */ herr_t H5O_encode(H5F_t *f, unsigned char *buf, const void *obj, unsigned type_id) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5O_encode,FAIL) /* check args */ HDassert(f); HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); /* Encode */ if((type->encode)(f, buf, obj) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTENCODE, FAIL, "unable to encode message") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_encode() */ /*------------------------------------------------------------------------- * Function: H5O_decode * * Purpose: Decode a binary object description and return a new * object handle. * * Note: This routine is not guaranteed to work with all possible * header messages, use with care. * * Return: Success: Pointer to object(data type or space) * * Failure: NULL * * Programmer: Raymond Lu * slu@ncsa.uiuc.edu * July 14, 2004 * *------------------------------------------------------------------------- */ void * H5O_decode(H5F_t *f, hid_t dxpl_id, const unsigned char *buf, unsigned type_id) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ void *ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_decode, NULL) /* check args */ HDassert(f); HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); /* decode */ if((ret_value = (type->decode)(f, dxpl_id, buf)) == NULL) HGOTO_ERROR(H5E_OHDR, H5E_CANTDECODE, NULL, "unable to decode message") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_decode() */ /*------------------------------------------------------------------------- * Function: H5O_iterate * * Purpose: Iterate through object headers of a certain type. * * Return: Returns a negative value if something is wrong, the return * value of the last operator if it was non-zero, or zero if all * object headers were processed. * * Programmer: Quincey Koziol * koziol@ncsa.uiuc.edu * Nov 19 2004 * * Description: * This function interates over the object headers of an object * specified with 'ent' of type 'type_id'. For each object header of the * object, the 'op_data' and some additional information (specified below) are * passed to the 'op' function. * The operation receives a pointer to the object header message for the * object being iterated over ('mesg'), and the pointer to the operator data * passed in to H5O_iterate ('op_data'). The return values from an operator * are: * A. Zero causes the iterator to continue, returning zero when all * object headers of that type have been processed. * B. Positive causes the iterator to immediately return that positive * value, indicating short-circuit success. * C. Negative causes the iterator to immediately return that value, * indicating failure. * *------------------------------------------------------------------------- */ herr_t H5O_iterate(const H5O_loc_t *loc, unsigned type_id, H5O_operator_t app_op, void *op_data, hid_t dxpl_id) { const H5O_msg_class_t *type; /* Actual H5O class type for the ID */ H5O_mesg_operator_t op; /* Wrapper for operator */ herr_t ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_iterate, FAIL) /* check args */ HDassert(loc); HDassert(loc->file); HDassert(H5F_addr_defined(loc->addr)); HDassert(type_id < NELMTS(H5O_msg_class_g)); type = H5O_msg_class_g[type_id]; /* map the type ID to the actual type object */ HDassert(type); /* Call the "real" iterate routine */ op.app_op = app_op; if((ret_value = H5O_iterate_real(loc, type, H5AC_READ, FALSE, op, op_data, dxpl_id)) < 0) HGOTO_ERROR(H5E_OHDR, H5E_BADITER, FAIL, "unable to iterate over object header messages") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_iterate() */ /*------------------------------------------------------------------------- * Function: H5O_iterate_real * * Purpose: Iterate through object headers of a certain type. * * Return: Returns a negative value if something is wrong, the return * value of the last operator if it was non-zero, or zero if all * object headers were processed. * * Programmer: Quincey Koziol * koziol@ncsa.uiuc.edu * Sep 6 2005 * * Description: * This function interates over the object headers of an object * specified with 'ent' of type 'type_id'. For each object header of the * object, the 'op_data' and some additional information (specified below) are * passed to the 'op' function. * The operation receives a pointer to the object header message for the * object being iterated over ('mesg'), and the pointer to the operator data * passed in to H5O_iterate ('op_data'). The return values from an operator * are: * A. Zero causes the iterator to continue, returning zero when all * object headers of that type have been processed. * B. Positive causes the iterator to immediately return that positive * value, indicating short-circuit success. * C. Negative causes the iterator to immediately return that value, * indicating failure. * * Modifications: * *------------------------------------------------------------------------- */ static herr_t H5O_iterate_real(const H5O_loc_t *loc, const H5O_msg_class_t *type, H5AC_protect_t prot, hbool_t internal, H5O_mesg_operator_t op, void *op_data, hid_t dxpl_id) { H5O_t *oh = NULL; /* Pointer to actual object header */ unsigned oh_flags = H5AC__NO_FLAGS_SET; /* Start iteration with no flags set on object header */ unsigned idx; /* Absolute index of current message in all messages */ unsigned sequence; /* Relative index of current message for messages of type */ H5O_mesg_t *idx_msg; /* Pointer to current message */ herr_t ret_value = H5_ITER_CONT; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5O_iterate_real) /* check args */ HDassert(loc); HDassert(loc->file); HDassert(H5F_addr_defined(loc->addr)); HDassert(type); HDassert(op.app_op); /* Protect the object header to iterate over */ if (NULL == (oh = H5AC_protect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, NULL, NULL, prot))) HGOTO_ERROR(H5E_OHDR, H5E_CANTLOAD, FAIL, "unable to load object header") /* Iterate over messages */ for(sequence = 0, idx = 0, idx_msg = &oh->mesg[0]; idx < oh->nmesgs && !ret_value; idx++, idx_msg++) { if(type->id == idx_msg->type->id) { void * unshared_mesg; /* JAMES */ /* * Decode the message if necessary. If the message is shared then decode * a shared message, ignoring the message type. */ LOAD_NATIVE(loc->file, dxpl_id, idx_msg, FAIL) /* JAMES: test */ if(idx_msg->flags & H5O_FLAG_SHARED) { if(NULL == (unshared_mesg = H5O_shared_read(loc->file, dxpl_id, idx_msg->native, idx_msg->type, NULL))) HGOTO_ERROR(H5E_OHDR, H5E_BADMESG, FAIL, "unable to read shared message"); } else unshared_mesg = idx_msg->native; /* Check for making an "internal" (i.e. within the H5O package) callback */ if(internal) { /* Call the "internal" iterator callback */ if((ret_value = (op.lib_op)(oh, idx_msg, sequence, &oh_flags, op_data)) != 0) break; } /* end if */ else { /* Call the iterator callback */ /* JAMES if((ret_value = (op.app_op)(idx_msg->native, sequence, op_data)) != 0) break; */ if((ret_value = (op.app_op)(unshared_mesg, sequence, op_data)) != 0) break; } /* end else */ /* JAMES again */ if(idx_msg->flags & H5O_FLAG_SHARED) { H5O_free_real(idx_msg->type, unshared_mesg); } /* Check for error from iterator */ if(ret_value < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "iterator function failed") /* Increment sequence value for message type */ sequence++; } /* end if */ } /* end for */ done: if(oh) { /* Check if object header was modified */ if(oh_flags & H5AC__DIRTIED_FLAG) { /* Shouldn't be able to modify object header if we don't have write access */ HDassert(prot == H5AC_WRITE); /* Try to condense object header info */ /* (Since this routine is invoked when a message is removed from * an object header, the header will be condensed after each * message removal) */ if(H5O_condense_header(loc->file, oh, dxpl_id) < 0) HDONE_ERROR(H5E_OHDR, H5E_CANTPACK, FAIL, "can't pack object header") H5O_touch_oh(loc->file, dxpl_id, oh, FALSE, &oh_flags); } /* end if */ if(H5AC_unprotect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, oh, oh_flags) < 0) HDONE_ERROR(H5E_OHDR, H5E_PROTECT, FAIL, "unable to release object header") } /* end if */ FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_iterate_real() */ /*------------------------------------------------------------------------- * Function: H5O_obj_type * * Purpose: Retrieves the type of object pointed to by `loc'. * * Return: Success: An object type defined in H5Gpublic.h * Failure: H5G_UNKNOWN * * Programmer: Robb Matzke * Wednesday, November 4, 1998 * *------------------------------------------------------------------------- */ herr_t H5O_obj_type(const H5O_loc_t *loc, H5O_type_t *obj_type, hid_t dxpl_id) { H5O_t *oh = NULL; /* Object header for location */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5O_obj_type, FAIL) /* Load the object header */ if(NULL == (oh = H5AC_protect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, NULL, NULL, H5AC_READ))) HGOTO_ERROR(H5E_OHDR, H5E_CANTLOAD, FAIL, "unable to load object header") /* Retrieve the type of the object */ if(H5O_obj_type_real(oh, obj_type) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "unable to determine object type") done: if(oh && H5AC_unprotect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, oh, H5AC__NO_FLAGS_SET) != SUCCEED) HDONE_ERROR(H5E_OHDR, H5E_PROTECT, FAIL, "unable to release object header") FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_obj_type() */ /*------------------------------------------------------------------------- * Function: H5O_obj_type_real * * Purpose: Returns the type of object pointed to by `oh'. * * Return: Success: An object type defined in H5Opublic.h * Failure: H5G_UNKNOWN * * Programmer: Quincey Koziol * Monday, November 21, 2005 * *------------------------------------------------------------------------- */ static herr_t H5O_obj_type_real(H5O_t *oh, H5O_type_t *obj_type) { const H5O_obj_class_t *obj_class; /* Class of object for header */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5O_obj_type_real) /* Sanity check */ HDassert(oh); HDassert(obj_type); /* Look up class for object header */ if(NULL == (obj_class = H5O_obj_class_real(oh))) HGOTO_ERROR(H5E_OHDR, H5E_CANTGET, FAIL, "unable to determine object type") /* Set object type */ *obj_type = obj_class->type; done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_obj_type_real() */ /*------------------------------------------------------------------------- * Function: H5O_obj_class * * Purpose: Returns the class of object pointed to by `loc'. * * Return: Success: An object class * Failure: NULL * * Programmer: Quincey Koziol * Monday, November 6, 2006 * *------------------------------------------------------------------------- */ static const H5O_obj_class_t * H5O_obj_class(H5O_loc_t *loc, hid_t dxpl_id) { H5O_t *oh = NULL; /* Object header for location */ const H5O_obj_class_t *ret_value; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5O_obj_class) /* Load the object header */ if(NULL == (oh = H5AC_protect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, NULL, NULL, H5AC_READ))) HGOTO_ERROR(H5E_OHDR, H5E_CANTLOAD, NULL, "unable to load object header") /* Test whether entry qualifies as a particular type of object */ if(NULL == (ret_value = H5O_obj_class_real(oh))) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, NULL, "unable to determine object type") done: if(oh && H5AC_unprotect(loc->file, dxpl_id, H5AC_OHDR, loc->addr, oh, H5AC__NO_FLAGS_SET) != SUCCEED) HDONE_ERROR(H5E_OHDR, H5E_PROTECT, NULL, "unable to release object header") FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_obj_class() */ /*------------------------------------------------------------------------- * Function: H5O_obj_class_real * * Purpose: Returns the class of object pointed to by `oh'. * * Return: Success: An object class * Failure: NULL * * Programmer: Quincey Koziol * Monday, November 21, 2005 * *------------------------------------------------------------------------- */ const H5O_obj_class_t * H5O_obj_class_real(H5O_t *oh) { size_t i; /* Local index variable */ const H5O_obj_class_t *ret_value; /* Return value */ FUNC_ENTER_NOAPI(H5O_obj_class_real, NULL) /* Sanity check */ HDassert(oh); /* Test whether entry qualifies as a particular type of object */ /* (Note: loop is in reverse order, to test specific objects first) */ for(i = NELMTS(H5O_obj_class_g); i > 0; --i) { htri_t isa; /* Is entry a particular type? */ if((isa = (H5O_obj_class_g[i - 1]->isa)(oh)) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, NULL, "unable to determine object type") else if(isa) HGOTO_DONE(H5O_obj_class_g[i - 1]) } /* end for */ if(0 == i) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, NULL, "unable to determine object type") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_obj_class_real() */ /*------------------------------------------------------------------------- * Function: H5O_loc_reset * * Purpose: Reset a object location to an empty state * * Return: Success: Non-negative * Failure: Negative * * Programmer: Quincey Koziol * Monday, September 19, 2005 * *------------------------------------------------------------------------- */ herr_t H5O_loc_reset(H5O_loc_t *loc) { FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5O_loc_reset) /* Check arguments */ HDassert(loc); /* Clear the object location to an empty state */ HDmemset(loc, 0, sizeof(H5O_loc_t)); loc->addr = HADDR_UNDEF; FUNC_LEAVE_NOAPI(SUCCEED) } /* end H5O_loc_reset() */ /*------------------------------------------------------------------------- * Function: H5O_loc_copy * * Purpose: Copy object location information * * Return: Success: Non-negative * Failure: Negative * * Programmer: Quincey Koziol * koziol@ncsa.uiuc.edu * Monday, September 19, 2005 * * Notes: 'depth' parameter determines how much of the group entry * structure we want to copy. The values are: * H5_COPY_SHALLOW - Copy all the field values from the source * to the destination, but not copying objects pointed to. * (Destination "takes ownership" of objects pointed to) * H5_COPY_DEEP - Copy all the fields from the source to * the destination, deep copying objects pointed to. * *------------------------------------------------------------------------- */ herr_t H5O_loc_copy(H5O_loc_t *dst, const H5O_loc_t *src, H5_copy_depth_t depth) { FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5O_loc_copy) /* Check arguments */ HDassert(src); HDassert(dst); HDassert(depth == H5_COPY_SHALLOW || depth == H5_COPY_DEEP); /* Copy the top level information */ HDmemcpy(dst, src, sizeof(H5O_loc_t)); /* Deep copy the names */ if(depth == H5_COPY_DEEP) { /* If the original entry was holding open the file, this one should * hold it open, too. */ if(src->holding_file) dst->file->nopen_objs++; } else if(depth == H5_COPY_SHALLOW) { /* Discarding 'const' qualifier OK - QAK */ H5O_loc_reset((H5O_loc_t *)src); } /* end if */ FUNC_LEAVE_NOAPI(SUCCEED) } /* end H5O_loc_copy() */ /*------------------------------------------------------------------------- * Function: H5O_loc_hold_file * * Purpose: Have this object header hold a file open until it is * released. * * Return: Success: Non-negative * Failure: Negative * * Programmer: James Laird * Wednesday, August 16, 2006 * *------------------------------------------------------------------------- */ herr_t H5O_loc_hold_file(H5O_loc_t *loc) { FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5O_loc_hold_file) /* Check arguments */ HDassert(loc); HDassert(loc->file); /* If this location is not already holding its file open, do so. */ if(!loc->holding_file) { loc->file->nopen_objs++; loc->holding_file = TRUE; } FUNC_LEAVE_NOAPI(SUCCEED) } /* end H5O_loc_hold_file() */ /*------------------------------------------------------------------------- * Function: H5O_loc_free * * Purpose: Release resources used by this object header location. * Not to be confused with H5O_close; this is used on * locations that don't correspond to open objects. * * Return: Success: Non-negative * Failure: Negative * * Programmer: James Laird * Wednesday, August 16, 2006 * *------------------------------------------------------------------------- */ herr_t H5O_loc_free(H5O_loc_t *loc) { herr_t ret_value = SUCCEED; FUNC_ENTER_NOAPI_NOINIT(H5O_loc_free) /* Check arguments */ HDassert(loc); /* If this location is holding its file open try to close the file. */ if(loc->holding_file) { loc->file->nopen_objs--; loc->holding_file = FALSE; if(loc->file->nopen_objs <= 0) { if(H5F_try_close(loc->file) < 0) HGOTO_ERROR(H5E_FILE, H5E_CANTCLOSEFILE, FAIL, "can't close file") } } done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_loc_free() */ /*------------------------------------------------------------------------- * Function: H5O_copy_mesg_file * * Purpose: Copies a message to file. If MESG is is the null pointer then a null * pointer is returned with no error. * * Return: Success: Ptr to the new message * * Failure: NULL * * Programmer: Peter Cao * June 4, 2005 * *------------------------------------------------------------------------- */ void * H5O_copy_mesg_file(const H5O_msg_class_t *copy_type, const H5O_msg_class_t *mesg_type, H5F_t *file_src, void *native_src, H5F_t *file_dst, hid_t dxpl_id, H5O_copy_t *cpy_info, void *udata) { void *ret_value; FUNC_ENTER_NOAPI_NOINIT(H5O_copy_mesg_file) /* check args */ HDassert(copy_type); HDassert(mesg_type); HDassert(copy_type->copy_file); HDassert(file_src); HDassert(native_src); HDassert(file_dst); HDassert(cpy_info); if(NULL == (ret_value = (copy_type->copy_file)(file_src, mesg_type, native_src, file_dst, dxpl_id, cpy_info, udata))) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, NULL, "unable to copy object header message to file") done: FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_copy_mesg_file() */ /*------------------------------------------------------------------------- * Function: H5O_mesg_hash * * Purpose: Returns a hash value for an object header message. * * Return: Non-H5O_HASH_UNDEF hash value on success * H5O_HASH_UNDEF on failure * * Programmer: James Laird * April 13 2006 * *------------------------------------------------------------------------- */ uint32_t H5O_mesg_hash(unsigned type_id, H5F_t *f, const void *mesg) { size_t buf_size; unsigned char * buf = NULL; /* Buffer to be hashed */ uint32_t hash; uint32_t ret_value; FUNC_ENTER_NOAPI(H5O_mesg_hash, H5O_HASH_UNDEF) /* Check args */ HDassert(type_id < NELMTS(H5O_msg_class_g)); HDassert(mesg); HDassert(f); /* Find out the size of buffer needed */ if((buf_size = H5O_raw_size(type_id, f, mesg)) <= 0) HGOTO_ERROR(H5E_OHDR, H5E_BADSIZE, H5O_HASH_UNDEF, "can't find message size"); /* JAMES: revisit this! Some messages don't use as much space as they say * they need. Quincey may have fixed this. */ if((buf = H5MM_calloc(buf_size)) == NULL) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, H5O_HASH_UNDEF, "can't allocate buffer for message"); /* Encode message into temporary buffer */ if(H5O_encode(f, buf, mesg, type_id) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTENCODE, H5O_HASH_UNDEF, "can't encode OH message"); /* * Compute the hash value for this message. type_id is used here to * initialize the hash algorithm, and affects the resulting value. */ hash = H5_checksum_lookup3(buf, buf_size, type_id); /* JAMES: this is a pretty good hash function. Do we need to version it? * If so, we'd do so here. */ /* A hash value of H5O_HASH_UNDEF indicates failure. If we naturally * generated this value, reset it to some valid value. */ if(hash == H5O_HASH_UNDEF) hash = (uint32_t) 1; /* Set return value */ ret_value = hash; done: if(buf) HDfree(buf); FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_mesg_hash() */ /*------------------------------------------------------------------------- * Function: H5O_get_info * * Purpose: Retrieve the information for an object * * Return: Success: Non-negative * Failure: Negative * * Programmer: Quincey Koziol * November 21 2006 * *------------------------------------------------------------------------- */ herr_t H5O_get_info(H5O_loc_t *oloc, H5O_info_t *oinfo, hid_t dxpl_id) { H5O_t *oh = NULL; /* Object header */ H5O_chunk_t *curr_chunk; /* Pointer to current message being operated on */ H5O_mesg_t *curr_msg; /* Pointer to current message being operated on */ unsigned u; /* Local index variable */ herr_t ret_value = SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5O_get_info, FAIL) /* Check args */ HDassert(oloc); HDassert(oinfo); /* Get the object header */ if(NULL == (oh = H5AC_protect(oloc->file, dxpl_id, H5AC_OHDR, oloc->addr, NULL, NULL, H5AC_READ))) HGOTO_ERROR(H5E_OHDR, H5E_CANTLOAD, FAIL, "unable to load object header") /* Retrieve the file's fileno */ if(H5F_get_fileno(oloc->file, &oinfo->fileno) < 0) HGOTO_ERROR(H5E_OHDR, H5E_BADVALUE, FAIL, "unable to read fileno") /* Set the object's address */ oinfo->addr = oloc->addr; /* Retrieve the type of the object */ if(H5O_obj_type_real(oh, &oinfo->type) < 0) HGOTO_ERROR(H5E_OHDR, H5E_CANTINIT, FAIL, "unable to determine object type") /* Set the object's reference count */ oinfo->rc = oh->nlink; /* Get modification time for object */ if(oh->version > H5O_VERSION_1) { oinfo->atime = oh->atime; oinfo->mtime = oh->mtime; oinfo->ctime = oh->ctime; } /* end if */ else { /* No information for access & modification fields */ /* (we stopped updating the "modification time" header message for * raw data changes, so the "modification time" header message * is closest to the 'change time', in POSIX terms - QAK) */ oinfo->atime = 0; oinfo->mtime = 0; /* Might be information for modification time */ if(NULL == H5O_read_real(oloc->file, oh, H5O_MTIME_ID, 0, &oinfo->mtime, dxpl_id)) { H5E_clear_stack(NULL); if(NULL == H5O_read_real(oloc->file, oh, H5O_MTIME_NEW_ID, 0, &oinfo->mtime, dxpl_id)) { H5E_clear_stack(NULL); oinfo->ctime = 0; } /* end if */ } /* end if */ } /* end else */ /* Set the version for the object header */ oinfo->hdr.version = oh->version; /* Set the number of messages & chunks */ oinfo->hdr.nmesgs = oh->nmesgs; oinfo->hdr.nchunks = oh->nchunks; /* Iterate over all the messages, accumulating message size & type information */ oinfo->num_attrs = 0; oinfo->hdr.meta_space = H5O_SIZEOF_HDR_OH(oh) + (H5O_SIZEOF_CHKHDR_OH(oh) * (oh->nchunks - 1)); oinfo->hdr.mesg_space = 0; oinfo->hdr.free_space = 0; oinfo->hdr.msg_present = 0; oinfo->hdr.msg_shared = 0; for(u = 0, curr_msg = &oh->mesg[0]; u < oh->nmesgs; u++, curr_msg++) { uint64_t type_flag; /* Flag for message type */ /* Check for attribute message */ if(H5O_ATTR_ID == curr_msg->type->id) oinfo->num_attrs++; /* Accumulate information, based on the type of message */ if(H5O_NULL_ID == curr_msg->type->id) oinfo->hdr.free_space += H5O_SIZEOF_MSGHDR_OH(oh) + curr_msg->raw_size; else if(H5O_CONT_ID == curr_msg->type->id) oinfo->hdr.meta_space += H5O_SIZEOF_MSGHDR_OH(oh) + curr_msg->raw_size; else { oinfo->hdr.meta_space += H5O_SIZEOF_MSGHDR_OH(oh); oinfo->hdr.mesg_space += curr_msg->raw_size; } /* end else */ /* Set flag to indicate present of message type */ type_flag = ((uint64_t)1) << curr_msg->type->id; oinfo->hdr.msg_present |= type_flag; /* Set flag if the message is shared in some way */ if(curr_msg->flags & H5O_FLAG_SHARED) \ oinfo->hdr.msg_shared |= type_flag; } /* end for */ /* Iterate over all the chunks, adding any gaps to the free space */ oinfo->hdr.hdr_size = 0; for(u = 0, curr_chunk = &oh->chunk[0]; u < oh->nchunks; u++, curr_chunk++) { /* Accumulate the size of the header on header */ oinfo->hdr.hdr_size += curr_chunk->size; /* If the chunk has a gap, add it to the free space */ oinfo->hdr.free_space += curr_chunk->gap; } /* end for */ /* Sanity check that all the bytes are accounted for */ HDassert(oinfo->hdr.hdr_size == (oinfo->hdr.free_space + oinfo->hdr.meta_space + oinfo->hdr.mesg_space + oh->skipped_mesg_size)); done: if(oh && H5AC_unprotect(oloc->file, dxpl_id, H5AC_OHDR, oloc->addr, oh, H5AC__NO_FLAGS_SET) < 0) HDONE_ERROR(H5E_OHDR, H5E_PROTECT, FAIL, "unable to release object header") FUNC_LEAVE_NOAPI(ret_value) } /* end H5O_get_info() */