/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the COPYING file, which can be found at the root of the source code * * distribution tree, or in https://www.hdfgroup.org/licenses. * * If you do not have access to either file, you may request a copy from * * help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Purpose: This file contains declarations which define macros for the * H5P package. Including this header means that the source file * is part of the H5P package. */ #ifndef H5Pmodule_H #define H5Pmodule_H /* Define the proper control macros for the generic FUNC_ENTER/LEAVE and error * reporting macros. */ #define H5P_MODULE #define H5_MY_PKG H5P #define H5_MY_PKG_ERR H5E_PLIST /** \page H5P_UG Properties and Property Lists in HDF5 * * \section sec_plist Properties and Property Lists in HDF5 * * HDF5 property lists are the main vehicle to configure the * behavior of HDF5 API functions. * * Typically, property lists are created by instantiating one of the built-in * or user-defined property list classes. After adding suitable properties, * property lists are used when opening or creating HDF5 items, or when reading * or writing data. Property lists can be modified by adding or changing * properties. Property lists are deleted by closing the associated handles. * * \subsection subsec_plist_intro Introduction * * HDF5 properties and property lists make it possible to shape or modify an HDF5 file, group, * dataset, attribute, committed datatype, or even an I/O stream, in a number of ways. For example, * you can do any of the following: * \li Customize the storage layout of a file to suit a project or task. * \li Create a chunked dataset. * \li Apply compression or filters to raw data. * \li Use either ASCII or UTF-8 character encodings. * \li Create missing groups on the fly. * \li Switch between serial and parallel I/O. * \li Create consistency within a single file or across an international project. * * Some properties enable an HDF5 application to take advantage of the capabilities of a specific * computing environment while others make a file more compact; some speed the reading or * writing of data while others enable more record-keeping at a per-object level. HDF5 offers * nearly one hundred specific properties that can be used in literally thousands of combinations to * maximize the usability of HDF5-stored data. * * At the most basic level, a property list is a collection of properties, represented by name/value * pairs that can be passed to various HDF5 functions, usually modifying default settings. A * property list inherits a set of properties and values from a property list class. But that statement * hardly provides a complete picture; in the rest of this section and in the next section, * \ref subsec_plist_class , we will discuss these things in much more detail. * After reading that material, the reader should have a reasonably complete understanding of how * properties and property lists can be used in HDF5 applications. * * * * * *
* \image html PropListEcosystem.gif "The HDF5 property environment" *
* * The remaining sections in this chapter discuss the following topics: * \li What are properties, property lists, and property list classes? * \li Property list programming model * \li Generic property functions * \li Summary listings of property list functions * \li Additional resources * * The discussions and function listings in this chapter focus on general property operations, object * and link properties, and related functions. * * File, group, dataset, datatype, and attribute properties are discussed in the chapters devoted to * those features, where that information will be most convenient to users. For example, \ref sec_dataset * discusses dataset creation property lists and functions, dataset access property lists and * functions, and dataset transfer property lists and functions. This chapter does not duplicate those * discussions. * * Generic property operations are an advanced feature and are beyond the scope of this guide. * * This chapter assumes an understanding of the following chapters of this \ref UG * \li \ref sec_data_model * \li \ref sec_program * * \subsection subsec_plist_class Property List Classes, Property Lists, and Properties * * HDF5 property lists and the property list interface \ref H5P provide a mechanism for storing * characteristics of objects in an HDF5 file and economically passing them around in an HDF5 * application. In this capacity, property lists significantly reduce the burden of additional function * parameters throughout the HDF5 API. Another advantage of property lists is that features can * often be added to HDF5 by adding only property list functions to the API; this is particularly true * when all other requirements of the feature can be accomplished internally to the library. * * For instance, a file creation operation needs to know several things about a file, such as the size * of the userblock or the sizes of various file data structures. Bundling this information as a * property list simplifies the interface by reducing the number of parameters to the function * \ref H5Fcreate. * * As illustrated in the figure above ("The HDF5 property environment"), the HDF5 property * environment is a three-level hierarchy: * \li Property list classes * \li Property lists * \li Properties * * The following subsections discuss property list classes, property lists, and properties in more detail. * * \subsubsection subsubsec_plist_class Property List Classes * * A property list class defines the roles that property lists of that class can play. Each class includes * all properties that are valid for that class with each property set to its default value. HDF5 offers * a property lists class for each of the following situations. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Property list classes in HDF5
Property List ClassFor further discussion
* File creation (FCPL) * * \ref H5P_FILE_CREATE * * See various sections of \ref sec_file *
* File access (FAPL) * * \ref H5P_FILE_ACCESS * * Used only as \ref H5P_DEFAULT. *
* File mount (FMPL) * * \ref H5P_FILE_MOUNT * * For more information, see \ref FileMountProps "File Mount Properties" *
* Object creation (OCPL) * * \ref H5P_OBJECT_CREATE * * See \ref OCPL *
* Object copy (OCPYPL) * * \ref H5P_OBJECT_COPY * * *
* Group creation (GCPL) * * \ref H5P_GROUP_CREATE * * See \ref subsec_group_program *
* Group access (GAPL) * * \ref H5P_GROUP_ACCESS * * *
* Link creation (LCPL) * * \ref H5P_LINK_CREATE * * See examples in \ref subsec_plist_program and \ref LCPL *
* Link access (LAPL) * * \ref H5P_LINK_ACCESS * * *
* Dataset creation (DCPL) * * \ref H5P_DATASET_CREATE * * See \ref subsec_dataset_program *
* Dataset access (DAPL) * * \ref H5P_DATASET_ACCESS * * *
* Dataset transfer (DXPL) * * \ref H5P_DATASET_XFER * * *
* Datatype creation (TCPL) * * \ref H5P_DATATYPE_CREATE * * See various sections of \ref sec_datatype *
* String creation (STRCPL) * * \ref H5P_STRING_CREATE * * See \ref subsec_dataset_program and \ref subsec_datatype_program *
* Attribute creation (ACPL) * * \ref H5P_ATTRIBUTE_CREATE * * See \ref subsec_attribute_work. *
* * Note: In the table above, the abbreviations to the right of each property list class name in this * table are widely used in both HDF5 programmer documentation and HDF5 source code. For * example, \ref FCPL (FCPL) is the file creation property list, \ref OCPL (OCPL) is the object creation * property list, \ref OCPYPL (OCPYPL) is object copy property list, and \ref STRCPL (STRCPL) is the string * creation property list. These abbreviations may appear in either uppercase or lowercase. * * The “HDF5 property list class inheritance hierarchy” figure, immediately following, illustrates * the inheritance hierarchy of HDF5’s property list classes. Properties are defined at the root of the * HDF5 property environment (\ref PLCR in the figure below). Property list * classes then inherit properties from that root, either directly or indirectly through a parent class. * In every case, a property list class inherits only the properties relevant to its role. For example, * the \ref OCPL (OCPL) inherits all properties that are relevant to the * creation of any object while the \ref GCPL (GCPL) inherits only those * properties that are relevant to group creation. * * * * * *
* \image html PropListClassInheritance.gif "HDF5 property list class inheritance hierarchy" *
* Note: In the figure above, property list classes displayed in black are directly accessible through * the programming interface; the root of the property environment and the \ref STRCPL and \ref OCPL * property list classes, in gray above, are not user-accessible. The red empty set symbol indicates * that the \ref FMPL (FMPL) is an empty class; that is, it has no set table * properties. For more information, see \ref FileMountProps "File Mount Properties". Abbreviations * used in this figure are defined in the preceding table, \ref table_plist "Property list classes in HDF5". * * \subsubsection subsubsec_plist_lists Property Lists * * A property list is a collection of related properties that are used together in specific * circumstances. A new property list created from a property list class inherits the properties of the * property list class and each property’s default value. A fresh dataset creation property list, for * example, includes all of the HDF5 properties relevant to the creation of a new dataset. * * Property lists are implemented as containers holding a collection of name/value pairs. Each pair * specifies a property name and a value for the property. A property list usually contains * information for one to many properties. * * HDF5’s default property values are designed to be reasonable for general use cases. Therefore, * an application can often use a property list without modification. On the other hand, adjusting * property list settings is a routine action and there are many reasons for an application to do so. * * A new property list may either be derived from a property list class or copied from an existing * property list. When a property list is created from a property list class, it contains all the * properties that are relevant to the class, with each property set to its default value. A new * property list created by copying an existing property list will contain the same properties and * property values as the original property list. In either case, the property values can be changed as * needed through the HDF5 API. * * Property lists can be freely reused to create consistency. For example, a single set of file, group, * and dataset creation property lists might be created at the beginning of a project and used to * create hundreds, thousands, even millions, of consistent files, file structures, and datasets over * the project’s life. When such consistency is important to a project, this is an economical means * of providing it. * * \subsubsection subsubsec_plist_props Properties * * A property is the basic element of the property list hierarchy. HDF5 offers nearly one hundred * properties controlling things ranging from file access rights, to the storage layout of a dataset, * through optimizing the use of a parallel computing environment. * * Further examples include the following: * * * * * * * * * * * * * * * * * * * * * *
PurposeExamplesProperty List
* Specify the driver to be used to open a file * * A POSIX driver or an MPI IO driver * * \ref FAPL *
* Specify filters to be applied to a dataset * * Gzip compression or checksum evaluation * * \ref DCPL *
* Specify whether to record key times associated with an object * * Creation time and/or last-modified time * * \ref OCPL *
* Specify the access mode for a file opened via an external link * * Read-only or read-write * * \ref LAPL *
* * Each property is initialized with a default value. For each property, there are one or more * dedicated H5Pset_*calls that can be used to change that value. * *

Creation, access, and transfer properties:

* * Properties fall into one of several major categories: creation properties, access properties, and * transfer properties. * * Creation properties control permanent object characteristics. These characteristics must be * established when an object is created, cannot change through the life of the object (they are * immutable), and the property setting usually has a permanent presence in the file. * * * * * * * * * * * * * * * *
Examples of creation properties include:
*

* Whether a dataset is stored in a compact, contiguous, or chunked layout
*
* The default for this dataset creation property (\ref H5Pset_layout) is that a dataset is * stored in a contiguous block. This works well for datasets with a known size limit that * will fit easily in system memory.
*
* A chunked layout is important if a dataset is to be compressed, to enable extending * the dataset’s size, or to enable caching during I/O.
*
* A compact layout is suitable only for very small datasets because the raw data is * stored in the object header. *

*
*

* Creation of intermediate groups when adding an object to an HDF5 file
*
* This link creation property, \ref H5Pset_create_intermediate_group, enables an * application to add an object in a file without having to know that the group or group * hierarchy containing that object already exists. With this property set, HDF5 * automatically creates missing groups. If this property is not set, an application must * verify that each group in the path exists, and create those that do not, before creating * the new object; if any group is missing, the create operation will fail. *

*
*

* Whether an HDF5 file is a single file or a set of tightly related files that form a virtual * HDF5 file
*
* Certain file creation properties enable the application to select one of several file * layouts. Examples of the available layouts include a standard POSIX-compliant * layout (\ref H5Pset_fapl_sec2), a family of files (\ref H5Pset_fapl_family), and a split file * layout that separates raw data and metadata into separate files (\ref H5Pset_fapl_split). * These and other file layout options are discussed in \ref subsec_file_alternate_drivers. *

*
*

* To enable error detection when creating a dataset
*
* In settings where data integrity is vulnerable, it may be desirable to set * checksumming when datasets are created (\ref H5Pset_fletcher32). A subsequent * application will then have a means to verify data integrity when reading the dataset. *

*
* * Access properties control transient object characteristics. These characteristics may change with * the circumstances under which an object is accessed. * * * * * * * * * *
Examples of access properties include:
*

* The driver used to open a file
*
* For example, a file might be created with the MPI I/O driver (\ref H5Pset_fapl_mpio) * during high-speed data acquisition in a parallel computing environment. The same * file might later be analyzed in a serial computing environment with I/O access * handled through the serial POSIX driver (\ref H5Pset_fapl_sec2). *

*
*

* Optimization settings in specialized environments
*
* Optimizations differ across computing environments and according to the needs of * the task being performed, so are transient by nature. *

*
* * Transfer properties apply only to datasets and control transient aspects of data I/O. These * characteristics may change with the circumstances under which data is accessed. * * * * * * * * * *
Examples of dataset transfer properties include:
*

* To enable error detection when reading a dataset
*
* If checksumming has been set on a dataset (with \ref H5Pset_fletcher32, in the dataset * creation property list), an application reading that dataset can choose whether to check * for data integrity (\ref H5Pset_edc_check). *

*
*

* Various properties to optimize chunked data I/O on parallel computing systems
*
* HDF5 provides several properties for tuning I/O of chunked datasets in a parallel * computing environment (\ref H5Pset_dxpl_mpio_chunk_opt, \ref H5Pset_dxpl_mpio_chunk_opt_num, * \ref H5Pset_dxpl_mpio_chunk_opt_ratio, and \ref H5Pget_mpio_actual_chunk_opt_mode).
*
* Optimal settings differ due to the characteristics of a computing environment and due * to an application’s data access patterns; even when working with the same file, these * settings might change for every application and every platform. *

*
* * \subsection subsec_plist_program Programming Model for Properties and Property Lists * * The programming model for HDF5 property lists is actually quite simple: * \li Create a property list. * \li Modify the property list, if required. * \li Use the property list. * \li Close the property list. * * There are nuances, of course, but that is the basic process. * * In some cases, you will not have to define property lists at all. If the default property settings are * sufficient for your application, you can tell HDF5 to use the default property list. * * The following sections first discuss the use of default property lists, then each step of the * programming model, and finally a few less frequently used property list operations. * * \subsubsection subsubsec_plist_default Using Default Property Lists * * Default property lists can simplify many routine HDF5 tasks because you do not always have to * create every property list you use. * * An application that would be well-served by HDF5’s default property settings can use the default * property lists simply by substituting the value \ref H5P_DEFAULT for a property list identifier. * HDF5 will then apply the default property list for the appropriate property list class. * * For example, the function \ref H5Dcreate2 calls for a link creation property list, a dataset creation * property list, and a dataset access property list. If the default properties are suitable for a dataset, * this call can be made as * \code * dset_id = H5Dcreate2( loc_id, name, dtype_id, space_id, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT ); * \endcode * HDF5 will then apply the default link creation, dataset creation, and dataset access property lists * correctly. * * Of course, you would not want to do this without considering where it is appropriate, as there * may be unforeseen consequences. Consider, for example, the use of chunked datasets. Optimal * chunking is quite dependent on the makeup of the dataset and the most common access patterns, * both of which must be taken into account in setting up the size and shape of chunks. * * \subsubsection subsubsec_plist_basic Basic Steps of the Programming Model * * The steps of the property list programming model are described in the sub-sections below. * *

Create a Property List

* * A new property list can be created either as an instance of a property list class or by copying an * existing property list. Consider the following examples. A new dataset creation property list is * first created "from scratch" with \ref H5Pcreate. A second dataset creation property list is then * created by copying the first one with \ref H5Pcopy. * * \code * dcplA_id = H5Pcreate (H5P_DATASET_CREATE); * \endcode * * The new dataset creation property list is created as an instance of the property list class * \ref H5P_DATASET_CREATE. * * The new dataset creation property list’s identifier is returned in dcplA_id and the property list is * initialized with default dataset creation property values. * * A list of valid classes appears in the table \ref table_plist "Property list classes in HDF5". * * \code * dcplB_id = H5Pcopy (dcplA_id); * \endcode * * A new dataset creation property list, dcplB_id, is created as a copy of dcplA_id and is initialized * with dataset creation property values currently in dcplA_id. * * At this point, dcplA_id and dcplB_id are identical; they will both contain any modified property * values that were changed in dcplA_id before dcplB_id was created. They may, however, diverge * as additional property values are reset in each. * * While we are creating property lists, let’s create a link creation property list; we will need this * property list when the new dataset is linked into the file below: * \code * lcplAB_id = H5Pcreate (H5P_LINK_CREATE); * \endcode * *

Change Property Values

* * This section describes how to set property values. * * Later in this section, the dataset creation property lists dcplA_id and dcplB_id created in the * section above will be used respectively to create chunked and contiguous datasets. To set this up, * we must set the layout property in each property list. The following example sets dcplA_id for * chunked datasets and dcplB_id for contiguous datasets: * \code * error = H5Pset_layout (dcplA_id, H5D_CHUNKED); * error = H5Pset_layout (dcplB_id, H5D_CONTIGUOUS); * \endcode * * Since dcplA_id specifies a chunked layout, we must also set the number of dimensions and the * size of the chunks. The example below specifies that datasets created with dcplA_id will be * 3-dimensional and that the chunk size will be 100 in each dimension: * \code * error = H5Pset_chunk (dcplA_id, 3, [100,100,100]); * \endcode * * These datasets will be created with UTF-8 encoded names. To accomplish that, the following * example sets the character encoding property in the link creation property list to create link * names with UTF-8 encoding: * \code * error = H5Pset_char_encoding (lcplAB_id, H5T_CSET_UTF8); * \endcode * * dcplA_id can now be used to create chunked datasets and dcplB_id to create contiguous datasets. * And with the use of lcplAB_id, they will be created with UTF-8 encoded names. * *

Use the Property List

* * Once the required property lists have been created, they can be used to control various HDF5 * processes. For illustration, consider dataset creation. * * Assume that the datatype dtypeAB and the dataspaces dspaceA and dspaceB have been defined * and that the location identifier locAB_id specifies the group AB in the current HDF5 file. We * have already created the required link creation and dataset creation property lists. * For the sake of illustration, we assume that the default dataset access property list meets our application * requirements. The following calls would create the datasets dsetA and dsetB in the group AB. * The raw data in dsetA will be contiguous while dsetB raw data will be chunked; both datasets * will have UTF-8 encoded link names: * * \code * dsetA_id = H5Dcreate2( locAB_id, dsetA, dtypeAB, dspaceA_id, * lcplAB_id, dcplA_id, H5P_DEFAULT ); * dsetB_id = H5Dcreate2( locAB_id, dsetB, dtypeAB, dspaceB_id, * lcplAB_id, dcplB_id, H5P_DEFAULT ); * \endcode * *

Close the Property List

* * Generally, creating or opening anything in an HDF5 file results in an HDF5 identifier. These * identifiers are of HDF5 type hid_t and include things like file identifiers, often expressed as * file_id; dataset identifiers, dset_id; and property list identifiers, plist_id. To reduce the risk of * memory leaks, all of these identifiers must be closed once they are no longer needed. * * Property list identifiers are no exception to this rule, and \ref H5Pclose is used for this purpose. The * calls immediately following would close the property lists created and used in the examples above. * * \code * error = H5Pclose (dcplA_id); * error = H5Pclose (dcplB_id); * error = H5Pclose (lcplAB_id); * \endcode * * \subsubsection subsubsec_plist_additional Additional Property List Operations * * A few property list operations fall outside of the programming model described above. This * section describes those operations. * *

Query the Class of an Existing Property List

* * Occasionally an application will have a property list but not know the corresponding property list * class. A call such as in the following example will retrieve the unknown class of a known property list: * \code * PList_Class = H5Pget_class (dcplA_id); * \endcode * * Upon this function’s return, PList_Class will contain the value \ref H5P_DATASET_CREATE indicating that * dcplA_id is a dataset creation property list. *

Determine Current Creation Property List Settings in an Existing Object

* * After a file has been created, another application may work on the file without knowing how the * creation properties for the file were set up. Retrieving these property values is often unnecessary; * HDF5 can read the data and knows how to deal with any properties it encounters. * * But sometimes an application must do something that requires knowing the creation property * settings. HDF5 makes the acquisition of this information fairly straight-forward; for each * property setting call, H5Pset_*, there is a corresponding H5Pget_*call to retrieve the property’s * current setting. * * Consider the following examples which illustrate the determination of dataset layout and chunking settings: * * The application must first identify the creation property list with the appropriate get creation property * list call. There is one such call for each kind of object. * * \ref H5Dget_create_plist will return a property list identifier for the creation property list that was * used to create the dataset. Call it DCPL1_id. * * \ref H5Pset_layout sets a dataset’s layout to be compact, contiguous, or chunked. * * \ref H5Pget_layout called with DCPL1_id will return the dataset’s layout, * either \ref H5D_COMPACT, \ref H5D_CONTIGUOUS, or \ref H5D_CHUNKED. * * \ref H5Pset_chunk sets the rank of a dataset, that is the number of dimensions it will have, and the * maximum size of each dimension. * * \ref H5Pget_chunk, also called with DCPL1_id, will return the rank of the dataset and the maximum * size of each dimension. * * If a creation property value has not been explicitly set, these H5Pget_calls will return the * property’s default value. * *

Determine Access Property Settings

* * Access property settings are quite different from creation properties. Since access property * settings are not retained in an HDF5 file or object, there is normally no knowledge of the settings * that were used in the past. On the other hand, since access properties do not affect characteristics * of the file or object, this is not normally an issue. For more information, see "Access and * Creation Property Exceptions." * * One circumstance under which an application might need to determine access property settings * might be when a file or object is already open but the application does not know the property list * settings. In that case, the application can use the appropriate get access property list * call to retrieve a property list identifier. For example, if the dataset dsetA * from the earlier examples is still open, the following call would return an identifier for the dataset * access property list in use: * \code * dsetA_dacpl_id = H5Dget_access_plist( dsetA_id ); * \endcode * * The application could then use the returned property list identifier to analyze the property settings * * \subsection subsec_plist_generic Generic Properties Interface and User-defined Properties * * HDF5’s generic property interface provides tools for managing the entire property hierarchy and * for the creation and management of user-defined property lists and properties. This interface also * makes it possible for an application or a driver to create, modify, and manage custom properties, * property lists, and property list classes. A comprehensive list of functions for this interface * appears under "Generic Property Operations (Advanced)" in the "H5P: Property List Interface" * section of the \ref RM. * * Further discussion of HDF5’s generic property interface and user-defined properties and * property lists is beyond the scope of this document. * * \subsection subsec_plist_H5P Property List Function Summaries * * General property functions, generic property functions and macros, property functions that are * used with multiple types of objects, and object and link property functions are listed below. * * Property list functions that apply to a specific type of object are listed in the chapter that * discusses that object. For example, the \ref sec_dataset chapter has two property list function listings: * one for dataset creation property list functions and one for dataset access property list functions. * As has been stated, this chapter is not intended to describe every property list function. * * \ref H5P reference manual * * \subsection subsec_plist_resources Additional Property List Resources * Property lists are ubiquitous in an HDF5 environment and are therefore discussed in many places * in HDF5 documentation. The following sections and listings in the \ref UG are of * particular interest: * \li In the \ref sec_data_model chapter, see \ref subsubsec_data_model_abstract_plist. * \li In the \ref sec_file chapter, see the following sections and listings: * * \li In the \ref sec_attribute chapter, see "Attribute creation property list functions (H5P)". * \li In the \ref sec_group chapter, see "Group creation property list functions (H5P)". * \li Property lists are discussed throughout \ref sec_dataset. * * All property list functions are described in the \ref H5P section of the * \ref RM. The function index at the top of the page provides a categorized listing * grouped by property list class. Those classes are listed below: * \li \ref FCPL * \li \ref FAPL * \li \ref GCPL * \li \ref DCPL * \li \ref DAPL * \li \ref DXPL * \li \ref LCPL * \li \ref LAPL * \li \ref OCPL * \li \ref OCPYPL * * Additional categories not related to the class structure are as follows: * \li General property list operations * \li Generic property list functions * * The general property functions can be used with any property list; the generic property functions * constitute an advanced feature. * * The in-memory file image feature of HDF5 uses property lists in a manner that differs * substantially from their use elsewhere in HDF5. Those who plan to use in-memory file images * must study "File Image Operations" (PDF) in the Advanced Topics in HDF5collection. * * \subsection subsec_plist_notes Notes * * \anchor FileMountProps

File Mount Properties

* * While the file mount property list class \ref H5P_FILE_MOUNT is a valid HDF5 property list class, * no file mount properties are defined by the HDF5 Library. References to a file mount property * list should always be expressed as \ref H5P_DEFAULT, meaning the default file mount property list. * *

Access and Creation Property Exceptions

* * There are a small number of exceptions to the rule that creation properties are always retained in * a file or object and access properties are never retained. * * The following properties are file access properties but they are not transient; they have * permanent and different effects on a file. They could be validly classified as file creation * properties as they must be set at creation time to properly create the file. But they are access * properties because they must also be set when a file is reopened to properly access the file. * * * * * * * * * * * * * * *
PropertyRelated function
* Family file driver * * \ref H5Pset_fapl_family *
* Split file driver * * \ref H5Pset_fapl_split *
* Core file driver * * \ref H5Pset_fapl_core *
* * The following is a link creation property, but it is not relevant after an object has been created * and is not retained in the file or object. * * * * * * *
PropertyRelated function
* Create missing intermediate groups * * \ref H5Pset_create_intermediate_group *
* * Previous Chapter \ref sec_error - Next Chapter \ref sec_vol * * \defgroup H5P Property Lists (H5P) * * Use the functions in this module to manage HDF5 property lists and property * list classes. HDF5 property lists are the main vehicle to configure the * behavior of HDF5 API functions. * * Typically, property lists are created by instantiating one of the built-in * or user-defined property list classes. After adding suitable properties, * property lists are used when opening or creating HDF5 items, or when reading * or writing data. Property lists can be modified by adding or changing * properties. Property lists are deleted by closing the associated handles. * * \ref PLCR * \snippet{doc} tables/propertyLists.dox plcr_table * * \ref PLCR * \snippet{doc} tables/propertyLists.dox plcra_table * * \ref PLCR / \ref OCPL / \ref GCPL * \snippet{doc} tables/propertyLists.dox fcpl_table * * \ref PLCR * \snippet{doc} tables/propertyLists.dox fapl_table * \snippet{doc} tables/propertyLists.dox fd_pl_table * * \ref PLCR * \snippet{doc} tables/propertyLists.dox lapl_table * * \ref PLCR / \ref OCPL * \snippet{doc} tables/propertyLists.dox dcpl_table * * \ref PLCR / \ref LAPL * \snippet{doc} tables/propertyLists.dox dapl_table * * \ref PLCR / \ref OCPL * \snippet{doc} tables/propertyLists.dox gcpl_table * * \ref PLCR / \ref LAPL * \snippet{doc} tables/propertyLists.dox gapl_table * * \ref PLCR * \snippet{doc} tables/propertyLists.dox ocpl_table * * \ref PLCR * \snippet{doc} tables/propertyLists.dox ocpypl_table * * \ref PLCR * \snippet{doc} tables/propertyLists.dox strcpl_table * * \ref PLCR / \ref STRCPL * \snippet{doc} tables/propertyLists.dox lcpl_table * * \ref PLCR / \ref STRCPL * \snippet{doc} tables/propertyLists.dox acpl_table * * * \defgroup STRCPL String Creation Properties * \ingroup H5P * Currently, there are only two creation properties that you can use to control * the creation of HDF5 attributes and links. The first creation property, the * choice of a character encoding, applies to both attributes and links. * The second creation property applies to links only, and advises the library * to automatically create missing intermediate groups when creating new objects. * * \snippet{doc} tables/propertyLists.dox strcpl_table * * \defgroup LCPL Link Creation Properties * \ingroup STRCPL * This creation property applies to links only, and advises the library * to automatically create missing intermediate groups when creating new objects. * * \snippet{doc} tables/propertyLists.dox lcpl_table * * @see STRCPL * * \defgroup ACPL Attribute Creation Properties * \ingroup STRCPL * The creation property, the choice of a character encoding, applies to attributes. * * \snippet{doc} tables/propertyLists.dox acpl_table * * @see STRCPL * * \defgroup LAPL Link Access Properties * \ingroup H5P * * \snippet{doc} tables/propertyLists.dox lapl_table * * \defgroup DAPL Dataset Access Properties * \ingroup LAPL * Use dataset access properties to modify the default behavior of the HDF5 * library when accessing datasets. The properties include adjusting the size * of the chunk cache, providing prefixes for external content and virtual * dataset file paths, and controlling flush behavior, etc. These properties * are \Emph{not} persisted with datasets, and can be adjusted at runtime before * a dataset is created or opened. * * \snippet{doc} tables/propertyLists.dox dapl_table * * \defgroup DCPL Dataset Creation Properties * \ingroup OCPL * Use dataset creation properties to control aspects of dataset creation such * as fill time, storage layout, compression methods, etc. * Unlike dataset access and transfer properties, creation properties \Emph{are} * stored with the dataset, and cannot be changed once a dataset has been * created. * * \snippet{doc} tables/propertyLists.dox dcpl_table * * \defgroup DXPL Dataset Transfer Properties * \ingroup H5P * Use dataset transfer properties to customize certain aspects of reading * and writing datasets such as transformations, MPI-IO I/O mode, error * detection, etc. These properties are \Emph{not} persisted with datasets, * and can be adjusted at runtime before a dataset is read or written. * * \snippet{doc} tables/propertyLists.dox dxpl_table * * \defgroup FAPL File Access Properties * \ingroup H5P * Use file access properties to modify the default behavior of the HDF5 * library when accessing files. The properties include selecting a virtual * file driver (VFD), configuring the metadata cache (MDC), control * file locking, etc. These properties are \Emph{not} persisted with files, and * can be adjusted at runtime before a file is created or opened. * * \snippet{doc} tables/propertyLists.dox fapl_table * \snippet{doc} tables/propertyLists.dox fd_pl_table * * \defgroup FCPL File Creation Properties * \ingroup GCPL * Use file creation properties to control aspects of file creation such * as setting a file space management strategy or creating a user block. * Unlike file access properties, creation properties \Emph{are} * stored with the file, and cannot be changed once a file has been * created. * * \snippet{doc} tables/propertyLists.dox fcpl_table * * \defgroup GAPL Group Access Properties * \ingroup LAPL * The functions in this section can be applied to group property lists. * * \snippet{doc} tables/propertyLists.dox gapl_table * * \defgroup GCPL Group Creation Properties * \ingroup OCPL * Use group creation properties to control aspects of group creation such * as storage layout, compression, and link creation order tracking. * Unlike file access properties, creation properties \Emph{are} * stored with the group, and cannot be changed once a group has been * created. * * \snippet{doc} tables/propertyLists.dox gcpl_table * * \defgroup PLCR Property List Class Root * \ingroup H5P * Use the functions in this module to manage HDF5 property lists. * * \snippet{doc} tables/propertyLists.dox plcr_table * * \defgroup PLCRA Property List Class Root (Advanced) * \ingroup H5P * You can create and customize user-defined property list classes using the * functions described below. Arbitrary user-defined properties can also * be inserted into existing property lists as so-called temporary properties. * * \snippet{doc} tables/propertyLists.dox plcra_table * * \defgroup OCPL Object Creation Properties * \ingroup H5P * * \snippet{doc} tables/propertyLists.dox ocpl_table * * \defgroup OCPYPL Object Copy Properties * \ingroup H5P * * \snippet{doc} tables/propertyLists.dox ocpypl_table * * \defgroup FMPL File Mount Properties * \ingroup H5P * Empty property class. * * * \defgroup TCPL Datatype Creation Properties * \ingroup OCPL * TCPL isn't supported yet. * * * \defgroup TAPL Datatype Access Properties * \ingroup LAPL * TAPL isn't supported yet. * * * */ #endif /* H5Pmodule_H */