/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Programmer: Quincey Koziol * Tuesday, June 16, 1998 * * Purpose: "All" selection data space I/O functions. */ #define H5S_PACKAGE /*suppress error about including H5Spkg */ /* Pablo information */ /* (Put before include files to avoid problems with inline functions) */ #define PABLO_MASK H5Sall_mask #include "H5private.h" /* Generic Functions */ #include "H5Eprivate.h" /* Error handling */ #include "H5Iprivate.h" /* ID Functions */ #include "H5Spkg.h" /* Dataspace functions */ #include "H5Vprivate.h" /* Vector functions */ /* Interface initialization */ #define INTERFACE_INIT NULL static int interface_initialize_g = 0; /* Static function prototypes */ static herr_t H5S_all_iter_coords(const H5S_sel_iter_t *iter, hssize_t *coords); static herr_t H5S_all_iter_block(const H5S_sel_iter_t *iter, hssize_t *start, hssize_t *end); static hsize_t H5S_all_iter_nelmts(const H5S_sel_iter_t *iter); static htri_t H5S_all_iter_has_next_block(const H5S_sel_iter_t *iter); static herr_t H5S_all_iter_next(H5S_sel_iter_t *sel_iter, size_t nelem); static herr_t H5S_all_iter_next_block(H5S_sel_iter_t *sel_iter); static herr_t H5S_all_iter_release(H5S_sel_iter_t *sel_iter); /*------------------------------------------------------------------------- * Function: H5S_all_iter_init * * Purpose: Initializes iteration information for "all" selection. * * Return: non-negative on success, negative on failure. * * Programmer: Quincey Koziol * Tuesday, June 16, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5S_all_iter_init (H5S_sel_iter_t *iter, const H5S_t *space, size_t UNUSED elmt_size) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5S_all_iter_init, FAIL); /* Check args */ assert (space && H5S_SEL_ALL==space->select.type); assert (iter); /* Initialize the number of elements to iterate over */ iter->elmt_left=H5S_get_simple_extent_npoints(space); /* Start at the upper left location */ iter->u.all.offset=0; /* Initialize methods for selection iterator */ iter->iter_coords=H5S_all_iter_coords; iter->iter_block=H5S_all_iter_block; iter->iter_nelmts=H5S_all_iter_nelmts; iter->iter_has_next_block=H5S_all_iter_has_next_block; iter->iter_next=H5S_all_iter_next; iter->iter_next_block=H5S_all_iter_next_block; iter->iter_release=H5S_all_iter_release; done: FUNC_LEAVE_NOAPI(ret_value); } /* H5S_all_iter_init() */ /*------------------------------------------------------------------------- * Function: H5S_all_iter_coords * * Purpose: Retrieve the current coordinates of iterator for current * selection * * Return: non-negative on success, negative on failure * * Programmer: Quincey Koziol * Tuesday, April 22, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t H5S_all_iter_coords (const H5S_sel_iter_t *iter, hssize_t *coords) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5S_all_iter_coords); /* Check args */ assert (iter); assert (coords); /* Calculate the coordinates for the current iterator offset */ if(H5V_array_calc(iter->u.all.offset,iter->rank,iter->dims,coords)<0) HGOTO_ERROR(H5E_DATASPACE, H5E_CANTGET, FAIL, "can't retrieve coordinates"); done: FUNC_LEAVE_NOAPI(ret_value); } /* H5S_all_iter_coords() */ /*------------------------------------------------------------------------- * Function: H5S_all_iter_block * * Purpose: Retrieve the current block of iterator for current * selection * * Return: non-negative on success, negative on failure * * Programmer: Quincey Koziol * Monday, June 2, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t H5S_all_iter_block (const H5S_sel_iter_t *iter, hssize_t *start, hssize_t *end) { unsigned u; /* Local index variable */ FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5S_all_iter_block); /* Check args */ assert (iter); assert (start); assert (end); for(u=0; urank; u++) { /* Set the start of the 'all' block */ /* (Always '0' coordinates for now) */ start[u]=0; /* Compute the end of the 'all' block */ /* (Always size of the extent for now) */ end[u]=iter->dims[u]-1; } /* end for */ FUNC_LEAVE_NOAPI(SUCCEED); } /* H5S_all_iter_coords() */ /*------------------------------------------------------------------------- * Function: H5S_all_iter_nelmts * * Purpose: Return number of elements left to process in iterator * * Return: non-negative number of elements on success, zero on failure * * Programmer: Quincey Koziol * Tuesday, June 16, 1998 * * Modifications: * *------------------------------------------------------------------------- */ static hsize_t H5S_all_iter_nelmts (const H5S_sel_iter_t *iter) { FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5S_all_iter_nelmts); /* Check args */ assert (iter); FUNC_LEAVE_NOAPI(iter->elmt_left); } /* H5S_all_iter_nelmts() */ /*-------------------------------------------------------------------------- NAME H5S_all_iter_next PURPOSE Check if there is another block left in the current iterator USAGE htri_t H5S_all_iter_has_next_block(iter) const H5S_sel_iter_t *iter; IN: Pointer to selection iterator RETURNS Non-negative (TRUE/FALSE) on success/Negative on failure DESCRIPTION Check if there is another block available in the selection iterator. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ static htri_t H5S_all_iter_has_next_block (const H5S_sel_iter_t UNUSED *iter) { FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5S_all_iter_has_next_block); /* Check args */ assert (iter); FUNC_LEAVE_NOAPI(FALSE); } /* H5S_all_iter_has_next_block() */ /*-------------------------------------------------------------------------- NAME H5S_all_iter_next PURPOSE Increment selection iterator USAGE herr_t H5S_all_iter_next(iter, nelem) H5S_sel_iter_t *iter; IN: Pointer to selection iterator size_t nelem; IN: Number of elements to advance by RETURNS Non-negative on success/Negative on failure DESCRIPTION Advance selection iterator to the NELEM'th next element in the selection. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ static herr_t H5S_all_iter_next(H5S_sel_iter_t *iter, size_t nelem) { FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5S_all_iter_next); /* Check args */ assert (iter); assert (nelem>0); /* Increment the iterator */ iter->u.all.offset+=nelem; FUNC_LEAVE_NOAPI(SUCCEED); } /* H5S_all_iter_next() */ /*-------------------------------------------------------------------------- NAME H5S_all_iter_next_block PURPOSE Increment selection iterator to next block USAGE herr_t H5S_all_iter_next_block(iter) H5S_sel_iter_t *iter; IN: Pointer to selection iterator RETURNS Non-negative on success/Negative on failure DESCRIPTION Advance selection iterator to the next block in the selection. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ static herr_t H5S_all_iter_next_block(H5S_sel_iter_t UNUSED *iter) { FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5S_all_iter_next_block); /* Check args */ assert (iter); FUNC_LEAVE_NOAPI(FAIL); } /* H5S_all_iter_next_block() */ /*-------------------------------------------------------------------------- NAME H5S_all_iter_release PURPOSE Release "all" selection iterator information for a dataspace USAGE herr_t H5S_all_iter_release(iter) H5S_sel_iter_t *iter; IN: Pointer to selection iterator RETURNS Non-negative on success/Negative on failure DESCRIPTION Releases all information for a dataspace "all" selection iterator GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ static herr_t H5S_all_iter_release (H5S_sel_iter_t UNUSED * iter) { FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5S_all_iter_release); /* Check args */ assert (iter); FUNC_LEAVE_NOAPI(SUCCEED); } /* H5S_all_iter_release() */ /*-------------------------------------------------------------------------- NAME H5S_all_release PURPOSE Release all selection information for a dataspace USAGE herr_t H5S_all_release(space) H5S_t *space; IN: Pointer to dataspace RETURNS Non-negative on success/Negative on failure DESCRIPTION Releases "all" selection information for a dataspace GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5S_all_release (H5S_t UNUSED * space) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5S_all_release, FAIL); /* Check args */ assert (space); done: FUNC_LEAVE_NOAPI(ret_value); } /* H5S_all_release() */ /*-------------------------------------------------------------------------- NAME H5S_all_npoints PURPOSE Compute number of elements in current selection USAGE hsize_t H5S_all_npoints(space) H5S_t *space; IN: Pointer to dataspace RETURNS The number of elements in selection on success, 0 on failure DESCRIPTION Compute number of elements in current selection. For "all" selections, this is the same as the number of points in the extent. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ hsize_t H5S_all_npoints (const H5S_t *space) { hsize_t ret_value; FUNC_ENTER_NOAPI(H5S_all_npoints, 0); /* Check args */ assert (space); ret_value=(hsize_t)H5S_get_simple_extent_npoints(space); done: FUNC_LEAVE_NOAPI(ret_value); } /* H5S_all_npoints() */ /*-------------------------------------------------------------------------- NAME H5S_all_is_valid PURPOSE Check whether the selection fits within the extent, with the current offset defined. USAGE htri_t H5S_all_is_valid(space); H5S_t *space; IN: Dataspace pointer to query RETURNS TRUE if the selection fits within the extent, FALSE if it does not and Negative on an error. DESCRIPTION Determines if the current selection at the current offet fits within the extent for the dataspace. Offset is irrelevant for this type of selection. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ htri_t H5S_all_is_valid (const H5S_t UNUSED *space) { htri_t ret_value=TRUE; /* Return value */ FUNC_ENTER_NOAPI(H5S_all_is_valid, FAIL); assert(space); done: FUNC_LEAVE_NOAPI(ret_value); } /* end H5S_all_is_valid() */ /*-------------------------------------------------------------------------- NAME H5S_all_serial_size PURPOSE Determine the number of bytes needed to store the serialized "all" selection information. USAGE hssize_t H5S_all_serial_size(space) H5S_t *space; IN: Dataspace pointer to query RETURNS The number of bytes required on success, negative on an error. DESCRIPTION Determines the number of bytes required to serialize an "all" selection for storage on disk. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ hssize_t H5S_all_serial_size (const H5S_t UNUSED *space) { hssize_t ret_value=FAIL; /* return value */ FUNC_ENTER_NOAPI(H5S_all_serial_size, FAIL); assert(space); /* Basic number of bytes required to serialize point selection: * + + + * = 16 bytes */ ret_value=16; done: FUNC_LEAVE_NOAPI(ret_value); } /* end H5S_all_serial_size() */ /*-------------------------------------------------------------------------- NAME H5S_all_serialize PURPOSE Serialize the current selection into a user-provided buffer. USAGE herr_t H5S_all_serialize(space, buf) H5S_t *space; IN: Dataspace pointer of selection to serialize uint8 *buf; OUT: Buffer to put serialized selection into RETURNS Non-negative on success/Negative on failure DESCRIPTION Serializes the current element selection into a buffer. (Primarily for storing on disk). GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5S_all_serialize (const H5S_t *space, uint8_t *buf) { herr_t ret_value=FAIL; /* return value */ FUNC_ENTER_NOAPI(H5S_all_serialize, FAIL); assert(space); /* Store the preamble information */ UINT32ENCODE(buf, (uint32_t)space->select.type); /* Store the type of selection */ UINT32ENCODE(buf, (uint32_t)1); /* Store the version number */ UINT32ENCODE(buf, (uint32_t)0); /* Store the un-used padding */ UINT32ENCODE(buf, (uint32_t)0); /* Store the additional information length */ /* Set success */ ret_value=SUCCEED; done: FUNC_LEAVE_NOAPI(ret_value); } /* H5S_all_serialize() */ /*-------------------------------------------------------------------------- NAME H5S_all_deserialize PURPOSE Deserialize the current selection from a user-provided buffer. USAGE herr_t H5S_all_deserialize(space, buf) H5S_t *space; IN/OUT: Dataspace pointer to place selection into uint8 *buf; IN: Buffer to retrieve serialized selection from RETURNS Non-negative on success/Negative on failure DESCRIPTION Deserializes the current selection into a buffer. (Primarily for retrieving from disk). GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5S_all_deserialize (H5S_t *space, const uint8_t UNUSED *buf) { herr_t ret_value=FAIL; /* return value */ FUNC_ENTER_NOAPI(H5S_all_deserialize, FAIL); assert(space); /* Change to "all" selection */ if((ret_value=H5S_select_all(space,1))<0) HGOTO_ERROR(H5E_DATASPACE, H5E_CANTDELETE, FAIL, "can't change selection"); done: FUNC_LEAVE_NOAPI(ret_value); } /* H5S_all_deserialize() */ /*-------------------------------------------------------------------------- NAME H5S_all_bounds PURPOSE Gets the bounding box containing the selection. USAGE herr_t H5S_all_bounds(space, start, end) H5S_t *space; IN: Dataspace pointer of selection to query hssize_t *start; OUT: Starting coordinate of bounding box hssize_t *end; OUT: Opposite coordinate of bounding box RETURNS Non-negative on success, negative on failure DESCRIPTION Retrieves the bounding box containing the current selection and places it into the user's buffers. The start and end buffers must be large enough to hold the dataspace rank number of coordinates. The bounding box exactly contains the selection, ie. if a 2-D element selection is currently defined with the following points: (4,5), (6,8) (10,7), the bounding box with be (4, 5), (10, 8). Calling this function on a "none" selection returns fail. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5S_all_bounds(const H5S_t *space, hssize_t *start, hssize_t *end) { int rank; /* Dataspace rank */ int i; /* index variable */ herr_t ret_value=SUCCEED; /* return value */ FUNC_ENTER_NOAPI(H5S_all_bounds, FAIL); assert(space); assert(start); assert(end); /* Get the dataspace extent rank */ rank=space->extent.u.simple.rank; /* Just copy over the complete extent */ for(i=0; iextent.u.simple.size[i]-1,hsize_t,hssize_t); } /* end for */ done: FUNC_LEAVE_NOAPI(ret_value); } /* H5Sget_all_bounds() */ /*-------------------------------------------------------------------------- NAME H5S_all_is_contiguous PURPOSE Check if a "all" selection is contiguous within the dataspace extent. USAGE htri_t H5S_all_is_contiguous(space) H5S_t *space; IN: Dataspace pointer to check RETURNS TRUE/FALSE/FAIL DESCRIPTION Checks to see if the current selection in the dataspace is contiguous. This is primarily used for reading the entire selection in one swoop. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ htri_t H5S_all_is_contiguous(const H5S_t UNUSED *space) { htri_t ret_value=TRUE; /* Return value */ FUNC_ENTER_NOAPI(H5S_all_is_contiguous, FAIL); assert(space); done: FUNC_LEAVE_NOAPI(ret_value); } /* H5S_all_is_contiguous() */ /*-------------------------------------------------------------------------- NAME H5S_all_is_single PURPOSE Check if a "all" selection is a single block within the dataspace extent. USAGE htri_t H5S_all_is_single(space) H5S_t *space; IN: Dataspace pointer to check RETURNS TRUE/FALSE/FAIL DESCRIPTION Checks to see if the current selection in the dataspace is a single block. This is primarily used for reading the entire selection in one swoop. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ htri_t H5S_all_is_single(const H5S_t UNUSED *space) { htri_t ret_value=TRUE; /* Return value */ FUNC_ENTER_NOAPI(H5S_all_is_single, FAIL); assert(space); done: FUNC_LEAVE_NOAPI(ret_value); } /* H5S_all_is_single() */ /*-------------------------------------------------------------------------- NAME H5S_all_is_regular PURPOSE Check if a "all" selection is "regular" USAGE htri_t H5S_all_is_regular(space) const H5S_t *space; IN: Dataspace pointer to check RETURNS TRUE/FALSE/FAIL DESCRIPTION Checks to see if the current selection in a dataspace is the a regular pattern. This is primarily used for reading the entire selection in one swoop. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ htri_t H5S_all_is_regular(const H5S_t UNUSED *space) { htri_t ret_value=TRUE; /* Return value */ FUNC_ENTER_NOAPI(H5S_all_is_regular, FAIL); /* Check args */ assert(space); done: FUNC_LEAVE_NOAPI(ret_value); } /* H5S_all_is_regular() */ /*-------------------------------------------------------------------------- NAME H5S_select_all PURPOSE Specify the the entire extent is selected USAGE herr_t H5S_select_all(dsid) hid_t dsid; IN: Dataspace ID of selection to modify unsigned rel_prev; IN: Flag whether to release previous selection or not RETURNS Non-negative on success/Negative on failure DESCRIPTION This function selects the entire extent for a dataspace. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5S_select_all (H5S_t *space, unsigned rel_prev) { herr_t ret_value=SUCCEED; /* return value */ FUNC_ENTER_NOAPI(H5S_select_all, FAIL); /* Check args */ assert(space); /* Not valid for H5S_NULL dataspace */ if (space->extent.type == H5S_NULL) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a valid data space"); /* Remove current selection first */ if(rel_prev) if((*space->select.release)(space)<0) HGOTO_ERROR(H5E_DATASPACE, H5E_CANTDELETE, FAIL, "can't release selection"); /* Set selection type */ space->select.type=H5S_SEL_ALL; /* Set selection methods */ space->select.get_seq_list=H5S_all_get_seq_list; space->select.get_npoints=H5S_all_npoints; space->select.release=H5S_all_release; space->select.is_valid=H5S_all_is_valid; space->select.serial_size=H5S_all_serial_size; space->select.serialize=H5S_all_serialize; space->select.bounds=H5S_all_bounds; space->select.is_contiguous=H5S_all_is_contiguous; space->select.is_single=H5S_all_is_single; space->select.is_regular=H5S_all_is_regular; space->select.iter_init=H5S_all_iter_init; done: FUNC_LEAVE_NOAPI(ret_value); } /* H5S_select_all() */ /*-------------------------------------------------------------------------- NAME H5Sselect_all PURPOSE Specify the the entire extent is selected USAGE herr_t H5Sselect_all(dsid) hid_t dsid; IN: Dataspace ID of selection to modify RETURNS Non-negative on success/Negative on failure DESCRIPTION This function selects the entire extent for a dataspace. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5Sselect_all (hid_t spaceid) { H5S_t *space = NULL; /* Dataspace to modify selection of */ herr_t ret_value=SUCCEED; /* return value */ FUNC_ENTER_API(H5Sselect_all, FAIL); /* Check args */ if (NULL == (space=H5I_object_verify(spaceid, H5I_DATASPACE))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space"); /* Not valid for H5S_NULL dataspace */ if (space->extent.type == H5S_NULL) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a valid data space"); /* Call internal routine to do the work */ if((ret_value=H5S_select_all(space,1))<0) HGOTO_ERROR(H5E_DATASPACE, H5E_CANTDELETE, FAIL, "can't change selection"); done: FUNC_LEAVE_API(ret_value); } /* H5Sselect_all() */ /*-------------------------------------------------------------------------- NAME H5S_all_get_seq_list PURPOSE Create a list of offsets & lengths for a selection USAGE herr_t H5S_all_get_seq_list(space,flags,iter,elem_size,maxseq,maxbytes,nseq,nbytes,off,len) H5S_t *space; IN: Dataspace containing selection to use. unsigned flags; IN: Flags for extra information about operation H5S_sel_iter_t *iter; IN/OUT: Selection iterator describing last position of interest in selection. size_t elem_size; IN: Size of an element size_t maxseq; IN: Maximum number of sequences to generate size_t maxbytes; IN: Maximum number of bytes to include in the generated sequences size_t *nseq; OUT: Actual number of sequences generated size_t *nbytes; OUT: Actual number of bytes in sequences generated hsize_t *off; OUT: Array of offsets size_t *len; OUT: Array of lengths RETURNS Non-negative on success/Negative on failure. DESCRIPTION Use the selection in the dataspace to generate a list of byte offsets and lengths for the region(s) selected. Start/Restart from the position in the ITER parameter. The number of sequences generated is limited by the MAXSEQ parameter and the number of sequences actually generated is stored in the NSEQ parameter. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5S_all_get_seq_list(const H5S_t UNUSED *space, unsigned UNUSED flags, H5S_sel_iter_t *iter, size_t elem_size, size_t UNUSED maxseq, size_t maxbytes, size_t *nseq, size_t *nbytes, hsize_t *off, size_t *len) { hsize_t bytes_left; /* The number of bytes left in the selection */ hsize_t elem_used; /* The number of bytes used */ herr_t ret_value=SUCCEED; /* return value */ FUNC_ENTER_NOAPI (H5S_all_get_seq_list, FAIL); /* Check args */ assert(space); assert(iter); assert(elem_size>0); assert(maxseq>0); assert(maxbytes>0); assert(nseq); assert(nbytes); assert(off); assert(len); /* Calculate the number of bytes left in the selection */ bytes_left=iter->elmt_left*elem_size; /* "round" off the maxbytes allowed to a multiple of the element size */ maxbytes=(maxbytes/elem_size)*elem_size; /* Compute the offset in the dataset */ off[0]=iter->u.all.offset*elem_size; H5_CHECK_OVERFLOW(bytes_left,hsize_t,size_t); len[0]=MIN(maxbytes,(size_t)bytes_left); /* Should only need one sequence for 'all' selections */ *nseq=1; /* Set the number of bytes used */ *nbytes=len[0]; /* Update the iterator */ elem_used=len[0]/elem_size; iter->elmt_left-=elem_used; iter->u.all.offset+=elem_used; done: FUNC_LEAVE_NOAPI(ret_value); } /* end H5S_all_get_seq_list() */