/* * Copyright (C) 1998 NCSA * All rights reserved. * * Programmer: Quincey Koziol * Friday, May 29, 1998 * * Purpose: Dataspace functions. */ #include #include #include #include #include #include #include /* Interface initialization */ #define PABLO_MASK H5Sselect_mask #define INTERFACE_INIT NULL static intn interface_initialize_g = 0; static hssize_t H5S_get_select_hyper_nblocks(H5S_t *space); static hssize_t H5S_get_select_elem_npoints(H5S_t *space); static herr_t H5S_get_select_hyper_blocklist(H5S_t *space, hsize_t startblock, hsize_t numblocks, hsize_t *buf); static herr_t H5S_get_select_elem_pointlist(H5S_t *space, hsize_t startpoint, hsize_t numpoints, hsize_t *buf); static herr_t H5S_get_select_bounds(H5S_t *space, hsize_t *start, hsize_t *end); /*-------------------------------------------------------------------------- NAME H5S_select_copy PURPOSE Copy a selection from one dataspace to another USAGE herr_t H5S_select_copy(dst, src) H5S_t *dst; OUT: Pointer to the destination dataspace H5S_t *src; IN: Pointer to the source dataspace RETURNS Non-negative on success/Negative on failure DESCRIPTION Copies all the selection information (include offset) from the source dataspace to the destination dataspace. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5S_select_copy (H5S_t *dst, const H5S_t *src) { herr_t ret_value=SUCCEED; /* return value */ FUNC_ENTER (H5S_select_copy, FAIL); /* Check args */ assert(dst); assert(src); /* Copy regular fields */ dst->select=src->select; /* Need to copy order information still */ /* Copy offset information */ if (NULL==(dst->select.offset = H5MM_calloc(src->extent.u.simple.rank*sizeof(hssize_t)))) { HRETURN_ERROR (H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed"); } if(src->select.offset!=NULL) HDmemcpy(dst->select.offset,src->select.offset,(src->extent.u.simple.rank*sizeof(hssize_t))); /* Perform correct type of copy based on the type of selection */ switch (src->extent.type) { case H5S_SCALAR: /*nothing needed */ break; case H5S_SIMPLE: /* Deep copy extra stuff */ switch(src->select.type) { case H5S_SEL_NONE: case H5S_SEL_ALL: /*nothing needed */ break; case H5S_SEL_POINTS: ret_value=H5S_point_copy(dst,src); break; case H5S_SEL_HYPERSLABS: ret_value=H5S_hyper_copy(dst,src); break; default: assert("unknown selection type" && 0); break; } /* end switch */ break; case H5S_COMPLEX: /*void */ break; default: assert("unknown data space type" && 0); break; } FUNC_LEAVE (ret_value); } /* H5S_select_copy() */ /*-------------------------------------------------------------------------- NAME H5S_select_release PURPOSE Release selection information for a dataspace USAGE herr_t H5S_select_release(space) H5S_t *space; IN: Pointer to dataspace RETURNS Non-negative on success/Negative on failure DESCRIPTION Releases all selection information for a dataspace GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5S_select_release (H5S_t *space) { herr_t ret_value=SUCCEED; /* return value */ FUNC_ENTER (H5S_select_release, FAIL); /* Check args */ assert (space); switch(space->select.type) { case H5S_SEL_POINTS: /* Sequence of points selected */ ret_value=H5S_point_release(space); break; case H5S_SEL_HYPERSLABS: /* Hyperslab selection defined */ ret_value=H5S_hyper_release(space); break; case H5S_SEL_ALL: /* Entire extent selected */ ret_value=H5S_all_release(space); break; case H5S_SEL_NONE: /* Nothing selected */ break; case H5S_SEL_ERROR: case H5S_SEL_N: break; } /* Reset type of selection to "all" */ space->select.type=H5S_SEL_ALL; FUNC_LEAVE (ret_value); } /* H5S_select_release() */ /*------------------------------------------------------------------------- * Function: H5S_select_hyperslab * * Purpose: Internal version of H5Sselect_hyperslab(). * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke (split from HSselect_hyperslab()). * Tuesday, August 25, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5S_select_hyperslab (H5S_t *space, H5S_seloper_t op, const hssize_t start[/*space_id*/], const hsize_t stride[/*space_id*/], const hsize_t count[/*space_id*/], const hsize_t block[/*space_id*/]) { hid_t stride_id=FAIL,block_id=FAIL; /* Stride & block temp. buffer IDs */ hsize_t *_stride=NULL; /* Stride array */ hsize_t *_block=NULL; /* Block size array */ hssize_t slab[H5O_LAYOUT_NDIMS]; /* Location of the block to add for strided selections */ size_t slice[H5O_LAYOUT_NDIMS]; /* Size of preceding dimension's slice */ H5S_hyper_node_t *add=NULL, /* List of hyperslab nodes to add */ *uniq=NULL, /* List of unique hyperslab nodes */ *tmp; /* Temporary hyperslab node */ uintn acc; /* Accumulator for building slices */ uintn contig; /* whether selection is contiguous or not */ int i,j; /* Counters */ H5S_hyper_dim_t *diminfo; /* per-dimension info for the selection */ herr_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5S_select_hyperslab, FAIL); /* Check args */ assert(space); assert(start); assert(count); assert(op>H5S_SELECT_NOOP && opextent.u.simple.rank,0,(void **)&_stride))<0) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "can't allocate stride vector"); H5V_array_fill(_stride,&fill,sizeof(hssize_t),space->extent.u.simple.rank); stride = _stride; } /* Fill in the correct block values */ if(block==NULL) { hssize_t fill=1; if((block_id = H5TB_get_buf(sizeof(hssize_t)*space->extent.u.simple.rank,0,(void **)&_block))<0) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "can't allocate block vector"); H5V_array_fill(_block,&fill,sizeof(hssize_t),space->extent.u.simple.rank); block = _block; } /* * Check for overlapping hyperslab blocks in new selection (remove when * real block-merging algorithm is in place? -QAK). */ if(op==H5S_SELECT_SET && block!=NULL) { for(i=0; iextent.u.simple.rank; i++) { if(stride[i]extent.u.simple.rank; i++) { /* contiguous hyperslabs have the block size equal to the stride */ if(stride[i]!=block[i]) { contig=0; /* hyperslab isn't contiguous */ break; /* no use looking further */ } /* end if */ } /* end for */ #ifdef QAK printf("%s: check 1.0\n",FUNC); #endif /* QAK */ /* If we are setting a new selection, remove current selection first */ if(op==H5S_SELECT_SET) { if(H5S_select_release(space)<0) { HGOTO_ERROR(H5E_DATASPACE, H5E_CANTDELETE, FAIL, "can't release hyperslab"); } /* end if */ } /* end if */ #ifdef QAK printf("%s: check 2.0\n",FUNC); #endif /* QAK */ /* Allocate space for the hyperslab selection information if necessary */ if(space->select.type!=H5S_SEL_HYPERSLABS || space->select.sel_info.hslab.hyper_lst==NULL) { if((space->select.sel_info.hslab.hyper_lst = H5MM_calloc(sizeof(H5S_hyper_list_t)))==NULL) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "can't allocate hyperslab information"); if((space->select.sel_info.hslab.hyper_lst->lo_bounds = H5MM_calloc(space->extent.u.simple.rank* sizeof(H5S_hyper_bound_t *)))==NULL) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "can't allocate hyperslab lo bound information"); if((space->select.sel_info.hslab.hyper_lst->hi_bounds = H5MM_calloc(space->extent.u.simple.rank* sizeof(H5S_hyper_bound_t *)))==NULL) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "can't allocate hyperslab lo bound information"); } /* end if */ /* Generate list of blocks to add/remove based on selection operation */ switch(op) { case H5S_SELECT_SET: case H5S_SELECT_OR: /* Generate list of blocks to add to selection */ if(contig) { /* Check for trivial case */ /* Account for strides & blocks being equal, but larger than one */ /* (Why someone would torture us this way, I don't know... -QAK :-) */ for(i=0; iextent.u.simple.rank; i++) slab[i]=count[i]*stride[i]; /* Add the contiguous hyperslab to the selection */ if(H5S_hyper_node_add(&add,0,space->extent.u.simple.rank,start,(const hsize_t *)slab)<0) { HGOTO_ERROR(H5E_DATASPACE, H5E_CANTINSERT, FAIL, "can't insert hyperslab"); } } else { /* Build the slice sizes for each dimension */ for(i=0, acc=1; iextent.u.simple.rank; i++) { slice[i]=acc; acc*=count[i]; } /* end for */ /* Step through all the blocks to add */ /* (reuse the count in ACC above) */ for(i=0; i<(int)acc; i++) { /* Build the location of the block */ for(j=0; jextent.u.simple.rank; j++) slab[j]=start[j]+((i/slice[j])%count[j])*stride[j]; /* Add the block to the list of hyperslab selections */ if(H5S_hyper_node_add(&add,0,space->extent.u.simple.rank,(const hssize_t *)slab, (const hsize_t *)block)<0) { HGOTO_ERROR(H5E_DATASPACE, H5E_CANTINSERT, FAIL, "can't insert hyperslab"); } /* end if */ } /* end for */ } /* end else */ /* Clip list of new blocks to add against current selection */ if(op==H5S_SELECT_OR) { H5S_hyper_clip(space,add,&uniq,NULL); add=uniq; } /* end if */ else { /* Copy all the per-dimension selection info into the space descriptor */ if((diminfo = H5MM_malloc(sizeof(H5S_hyper_dim_t)*space->extent.u.simple.rank))==NULL) { HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "can't allocate per-dimension vector"); } /* end if */ for(i=0; iextent.u.simple.rank; i++) { diminfo[i].start = start[i]; diminfo[i].stride = stride[i]; diminfo[i].count = count[i]; diminfo[i].block = block[i]; } /* end for */ space->select.sel_info.hslab.diminfo = diminfo; } /* end else */ break; default: HRETURN_ERROR(H5E_ARGS, H5E_UNSUPPORTED, FAIL, "invalid selection operation"); } /* end switch */ /* Add new blocks to current selection */ while(add!=NULL) { tmp=add->next; /* Add new block */ if(H5S_hyper_add(space,(const hssize_t *)add->start, (const hsize_t *)add->end)<0) HGOTO_ERROR(H5E_DATASPACE, H5E_CANTINSERT, FAIL, "can't insert hyperslab"); /* Free nodes in list */ H5MM_xfree(add->start); H5MM_xfree(add->end); H5MM_xfree(add); /* Go to next node */ add=tmp; } /* end while */ /* Merge blocks for better I/O performance */ /* Regenerate lo/hi bounds arrays? */ #ifdef QAK printf("%s: check 3.0\n",FUNC); #endif /* QAK */ /* Set selection type */ space->select.type=H5S_SEL_HYPERSLABS; ret_value=SUCCEED; #ifdef QAK printf("%s: check 4.0\n",FUNC); #endif /* QAK */ done: if(_stride!=NULL) H5TB_release_buf(stride_id); if(_block!=NULL) H5TB_release_buf(block_id); FUNC_LEAVE (ret_value); } /*-------------------------------------------------------------------------- NAME H5Sselect_hyperslab PURPOSE Specify a hyperslab to combine with the current hyperslab selection USAGE herr_t H5Sselect_hyperslab(dsid, op, start, stride, count, block) hid_t dsid; IN: Dataspace ID of selection to modify H5S_seloper_t op; IN: Operation to perform on current selection const hssize_t *start; IN: Offset of start of hyperslab const hssize_t *stride; IN: Hyperslab stride const hssize_t *count; IN: Number of blocks included in hyperslab const hssize_t *block; IN: Size of block in hyperslab RETURNS Non-negative on success/Negative on failure DESCRIPTION Combines a hyperslab selection with the current selection for a dataspace. If the current selection is not a hyperslab, it is freed and the hyperslab parameters passed in are combined with the H5S_SEL_ALL hyperslab (ie. a selection composing the entire current extent). Currently, only the H5S_SELECT_SET & H5S_SELECT_OR operations are supported. If STRIDE or BLOCK is NULL, they are assumed to be set to all '1'. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5Sselect_hyperslab(hid_t space_id, H5S_seloper_t op, const hssize_t start[/*space_id*/], const hsize_t _stride[/*space_id*/], const hsize_t count[/*space_id*/], const hsize_t _block[/*space_id*/]) { H5S_t *space = NULL; /* Dataspace to modify selection of */ FUNC_ENTER (H5Sselect_hyperslab, FAIL); H5TRACE6("e","iSs*[a0]Hs*[a0]h*[a0]h*[a0]h",space_id,op,start,_stride, count,_block); /* Check args */ if (H5I_DATASPACE != H5I_get_type(space_id) || NULL == (space=H5I_object(space_id))) { HRETURN_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space"); } if(start==NULL || count==NULL) { HRETURN_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "hyperslab not specified"); } /* end if */ if(!(op>H5S_SELECT_NOOP && op by NUM_ELEM (ie. a list of coordinates in the dataspace). The order of the element coordinates in the COORD array specifies the order that the array elements are iterated through when I/O is performed. Duplicate coordinates are not checked for. The selection operator, OP, determines how the new selection is to be combined with the existing selection for the dataspace. Currently, only H5S_SELECT_SET is supported, which replaces the existing selection with the one defined in this call. When operators other than H5S_SELECT_SET are used to combine a new selection with an existing selection, the selection ordering is reset to 'C' array ordering. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5S_select_elements (H5S_t *space, H5S_seloper_t op, size_t num_elem, const hssize_t **coord) { herr_t ret_value=SUCCEED; /* return value */ FUNC_ENTER (H5S_select_elements, FAIL); /* Check args */ assert(space); assert(num_elem); assert(coord); assert(op==H5S_SELECT_SET); #ifdef QAK printf("%s: check 1.0\n",FUNC); #endif /* QAK */ /* If we are setting a new selection, remove current selection first */ if(op==H5S_SELECT_SET) { if(H5S_select_release(space)<0) { HGOTO_ERROR(H5E_DATASPACE, H5E_CANTDELETE, FAIL, "can't release hyperslab"); } /* end if */ } /* end if */ #ifdef QAK printf("%s: check 2.0\n",FUNC); #endif /* QAK */ /* Allocate space for the point selection information if necessary */ if(space->select.type!=H5S_SEL_POINTS || space->select.sel_info.pnt_lst==NULL) { if((space->select.sel_info.pnt_lst = H5MM_calloc(sizeof(H5S_pnt_list_t)))==NULL) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "can't allocate element information"); } /* end if */ #ifdef QAK printf("%s: check 3.0\n",FUNC); #endif /* QAK */ /* Add points to selection */ if(H5S_point_add(space,num_elem,coord)<0) { HGOTO_ERROR(H5E_DATASPACE, H5E_CANTINSERT, FAIL, "can't insert elements"); } /* Set selection type */ space->select.type=H5S_SEL_POINTS; #ifdef QAK printf("%s: check 4.0\n",FUNC); #endif /* QAK */ done: FUNC_LEAVE (ret_value); } /* H5S_select_elements() */ /*-------------------------------------------------------------------------- NAME H5Sselect_elements PURPOSE Specify a series of elements in the dataspace to select USAGE herr_t H5Sselect_elements(dsid, op, num_elem, coord) hid_t dsid; IN: Dataspace ID of selection to modify H5S_seloper_t op; IN: Operation to perform on current selection size_t num_elem; IN: Number of elements in COORD array. const hssize_t **coord; IN: The location of each element selected RETURNS Non-negative on success/Negative on failure DESCRIPTION This function selects array elements to be included in the selection for the dataspace. The COORD array is a 2-D array of size by NUM_ELEM (ie. a list of coordinates in the dataspace). The order of the element coordinates in the COORD array specifies the order that the array elements are iterated through when I/O is performed. Duplicate coordinates are not checked for. The selection operator, OP, determines how the new selection is to be combined with the existing selection for the dataspace. Currently, only H5S_SELECT_SET is supported, which replaces the existing selection with the one defined in this call. When operators other than H5S_SELECT_SET are used to combine a new selection with an existing selection, the selection ordering is reset to 'C' array ordering. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5Sselect_elements (hid_t spaceid, H5S_seloper_t op, size_t num_elem, const hssize_t **coord) { H5S_t *space = NULL; /* Dataspace to modify selection of */ herr_t ret_value=SUCCEED; /* return value */ FUNC_ENTER (H5Sselect_elements, FAIL); /* Check args */ if (H5I_DATASPACE != H5I_get_type(spaceid) || NULL == (space=H5I_object(spaceid))) { HRETURN_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space"); } if(coord==NULL || num_elem==0) { HRETURN_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "elements not specified"); } /* end if */ if(op!=H5S_SELECT_SET) { HRETURN_ERROR(H5E_ARGS, H5E_UNSUPPORTED, FAIL, "operations other than H5S_SELECT_SET not supported currently"); } /* end if */ /* Call the real element selection routine */ if((ret_value=H5S_select_elements(space,op,num_elem,coord))<0) { HGOTO_ERROR(H5E_DATASPACE, H5E_CANTDELETE, FAIL, "can't select elements"); } /* end if */ done: FUNC_LEAVE (ret_value); } /* H5Sselect_elements() */ /*-------------------------------------------------------------------------- NAME H5S_select_all PURPOSE Specify the the entire extent is selected USAGE herr_t H5S_select_all(dsid) hid_t dsid; IN: Dataspace ID of selection to modify RETURNS Non-negative on success/Negative on failure DESCRIPTION This function selects the entire extent for a dataspace. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5S_select_all (H5S_t *space) { herr_t ret_value=SUCCEED; /* return value */ FUNC_ENTER (H5S_select_all, FAIL); /* Check args */ assert(space); /* Remove current selection first */ if(H5S_select_release(space)<0) { HGOTO_ERROR(H5E_DATASPACE, H5E_CANTDELETE, FAIL, "can't release selection"); } /* end if */ /* Set selection type */ space->select.type=H5S_SEL_ALL; done: FUNC_LEAVE (ret_value); } /* H5S_select_all() */ /*-------------------------------------------------------------------------- NAME H5Sselect_all PURPOSE Specify the the entire extent is selected USAGE herr_t H5Sselect_all(dsid) hid_t dsid; IN: Dataspace ID of selection to modify RETURNS Non-negative on success/Negative on failure DESCRIPTION This function selects the entire extent for a dataspace. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5Sselect_all (hid_t spaceid) { H5S_t *space = NULL; /* Dataspace to modify selection of */ herr_t ret_value=SUCCEED; /* return value */ FUNC_ENTER (H5Sselect_all, FAIL); /* Check args */ if (H5I_DATASPACE != H5I_get_type(spaceid) || NULL == (space=H5I_object(spaceid))) { HRETURN_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space"); } /* Remove current selection first */ if((ret_value=H5S_select_all(space))<0) { HGOTO_ERROR(H5E_DATASPACE, H5E_CANTDELETE, FAIL, "can't change selection"); } /* end if */ done: FUNC_LEAVE (ret_value); } /* H5Sselect_all() */ /*-------------------------------------------------------------------------- NAME H5S_select_none PURPOSE Specify that nothing is selected in the extent USAGE herr_t H5S_select_none(dsid) hid_t dsid; IN: Dataspace ID of selection to modify RETURNS Non-negative on success/Negative on failure DESCRIPTION This function de-selects the entire extent for a dataspace. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5S_select_none (H5S_t *space) { herr_t ret_value=SUCCEED; /* return value */ FUNC_ENTER (H5S_select_none, FAIL); /* Check args */ assert(space); /* Remove current selection first */ if(H5S_select_release(space)<0) { HGOTO_ERROR(H5E_DATASPACE, H5E_CANTDELETE, FAIL, "can't release hyperslab"); } /* end if */ /* Set selection type */ space->select.type=H5S_SEL_NONE; done: FUNC_LEAVE (ret_value); } /* H5S_select_none() */ /*-------------------------------------------------------------------------- NAME H5Sselect_none PURPOSE Specify that nothing is selected in the extent USAGE herr_t H5Sselect_none(dsid) hid_t dsid; IN: Dataspace ID of selection to modify RETURNS Non-negative on success/Negative on failure DESCRIPTION This function de-selects the entire extent for a dataspace. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5Sselect_none (hid_t spaceid) { H5S_t *space = NULL; /* Dataspace to modify selection of */ herr_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5Sselect_none, FAIL); /* Check args */ if (H5I_DATASPACE != H5I_get_type(spaceid) || NULL == (space=H5I_object(spaceid))) { HRETURN_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space"); } /* Change to "none" selection */ if((ret_value=H5S_select_none(space))<0) { HGOTO_ERROR(H5E_DATASPACE, H5E_CANTDELETE, FAIL, "can't change selection"); } /* end if */ done: FUNC_LEAVE (ret_value); } /* H5Sselect_none() */ /*-------------------------------------------------------------------------- NAME H5Sget_select_npoints PURPOSE Get the number of elements in current selection USAGE hssize_t H5Sget_select_npoints(dsid) hid_t dsid; IN: Dataspace ID of selection to query RETURNS The number of elements in selection on success, 0 on failure DESCRIPTION Returns the number of elements in current selection for dataspace. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ hssize_t H5Sget_select_npoints(hid_t spaceid) { H5S_t *space = NULL; /* Dataspace to modify selection of */ hssize_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5Sget_select_npoints, 0); H5TRACE1("Hs","i",spaceid); /* Check args */ if (H5I_DATASPACE != H5I_get_type(spaceid) || NULL == (space=H5I_object(spaceid))) { HRETURN_ERROR(H5E_ARGS, H5E_BADTYPE, 0, "not a data space"); } ret_value = H5S_get_select_npoints(space); FUNC_LEAVE (ret_value); } /* H5Sget_select_npoints() */ /*-------------------------------------------------------------------------- NAME H5S_get_select_npoints PURPOSE Get the number of elements in current selection USAGE herr_t H5Sselect_hyperslab(ds) H5S_t *ds; IN: Dataspace pointer RETURNS The number of elements in selection on success, 0 on failure DESCRIPTION Returns the number of elements in current selection for dataspace. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ hssize_t H5S_get_select_npoints (const H5S_t *space) { hssize_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5S_get_select_npoints, FAIL); assert(space); switch(space->select.type) { case H5S_SEL_POINTS: /* Sequence of points selected */ ret_value=H5S_point_npoints(space); break; case H5S_SEL_HYPERSLABS: /* Hyperslab selection defined */ ret_value=H5S_hyper_npoints(space); break; case H5S_SEL_ALL: /* Entire extent selected */ ret_value=H5S_all_npoints(space); break; case H5S_SEL_NONE: /* Nothing selected */ ret_value=0; break; case H5S_SEL_ERROR: case H5S_SEL_N: break; } FUNC_LEAVE (ret_value); } /* H5S_get_select_npoints() */ /*-------------------------------------------------------------------------- NAME H5S_sel_iter_release PURPOSE Release selection iterator information for a dataspace USAGE herr_t H5S_sel_iter_release(sel_iter) const H5S_t *space; IN: Pointer to dataspace iterator is for H5S_sel_iter_t *sel_iter; IN: Pointer to selection iterator RETURNS Non-negative on success/Negative on failure DESCRIPTION Releases all information for a dataspace selection iterator GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5S_sel_iter_release (const H5S_t *space, H5S_sel_iter_t *sel_iter) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER (H5S_sel_iter_release, FAIL); /* Check args */ assert (sel_iter); switch(space->select.type) { case H5S_SEL_POINTS: /* Sequence of points selected */ case H5S_SEL_ALL: /* Entire extent selected */ /* no action needed */ ret_value=SUCCEED; break; case H5S_SEL_HYPERSLABS: /* Hyperslab selection defined */ ret_value=H5S_hyper_sel_iter_release(sel_iter); break; case H5S_SEL_NONE: /* Nothing selected */ break; case H5S_SEL_ERROR: case H5S_SEL_N: break; } FUNC_LEAVE (ret_value); } /* H5S_sel_iter_release() */ /*-------------------------------------------------------------------------- NAME H5Sselect_valid PURPOSE Check whether the selection fits within the extent, with the current offset defined. USAGE htri_t H5Sselect_void(dsid) hid_t dsid; IN: Dataspace ID to query RETURNS TRUE if the selection fits within the extent, FALSE if it does not and Negative on an error. DESCRIPTION Determines if the current selection at the current offet fits within the extent for the dataspace. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ htri_t H5Sselect_valid(hid_t spaceid) { H5S_t *space = NULL; /* Dataspace to modify selection of */ htri_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5Sselect_valid, 0); H5TRACE1("b","i",spaceid); /* Check args */ if (H5I_DATASPACE != H5I_get_type(spaceid) || NULL == (space=H5I_object(spaceid))) { HRETURN_ERROR(H5E_ARGS, H5E_BADTYPE, 0, "not a data space"); } ret_value = H5S_select_valid(space); FUNC_LEAVE (ret_value); } /* H5Sselect_valid() */ /*-------------------------------------------------------------------------- NAME H5S_select_valid PURPOSE Check whether the selection fits within the extent, with the current offset defined. USAGE htri_t H5Sselect_void(space) H5S_t *space; IN: Dataspace pointer to query RETURNS TRUE if the selection fits within the extent, FALSE if it does not and Negative on an error. DESCRIPTION Determines if the current selection at the current offet fits within the extent for the dataspace. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ htri_t H5S_select_valid (const H5S_t *space) { htri_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5S_select_valid, FAIL); assert(space); switch(space->select.type) { case H5S_SEL_POINTS: /* Sequence of points selected */ ret_value=H5S_point_select_valid(space); break; case H5S_SEL_HYPERSLABS: /* Hyperslab selection defined */ ret_value=H5S_hyper_select_valid(space); break; case H5S_SEL_ALL: /* Entire extent selected */ case H5S_SEL_NONE: /* Nothing selected */ ret_value=TRUE; break; case H5S_SEL_ERROR: case H5S_SEL_N: break; } FUNC_LEAVE (ret_value); } /* H5S_select_valid() */ /*-------------------------------------------------------------------------- NAME H5S_select_serial_size PURPOSE Determine the number of bytes needed to serialize the current selection offset defined. USAGE hssize_t H5S_select_serial_size(space) H5S_t *space; IN: Dataspace pointer to query RETURNS The number of bytes required on success, negative on an error. DESCRIPTION Determines the number of bytes required to serialize the current selection information for storage on disk. This routine just hands off to the appropriate routine for each type of selection. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ hssize_t H5S_select_serial_size (const H5S_t *space) { hssize_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5S_select_serial_size, FAIL); assert(space); switch(space->select.type) { case H5S_SEL_POINTS: /* Sequence of points selected */ ret_value=H5S_point_select_serial_size(space); break; case H5S_SEL_HYPERSLABS: /* Hyperslab selection defined */ ret_value=H5S_hyper_select_serial_size(space); break; case H5S_SEL_ALL: /* Entire extent selected */ case H5S_SEL_NONE: /* Nothing selected */ ret_value=16; /* replace with real function call at some point */ break; case H5S_SEL_ERROR: case H5S_SEL_N: break; } FUNC_LEAVE (ret_value); } /* H5S_select_serial_size() */ /*-------------------------------------------------------------------------- NAME H5S_select_serialize PURPOSE Serialize the current selection into a user-provided buffer. USAGE herr_t H5S_select_serialize(space, buf) H5S_t *space; IN: Dataspace pointer of selection to serialize uint8 *buf; OUT: Buffer to put serialized selection into RETURNS Non-negative on success/Negative on failure DESCRIPTION Serializes the current selection into a buffer. (Primarily for storing on disk). This routine just hands off to the appropriate routine for each type of selection. The serialized information for all types of selections follows this format: = uint32 = uint32 = 4 bytes = uint32 = ? bytes (depends on selection type) GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5S_select_serialize (const H5S_t *space, uint8_t *buf) { herr_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5S_select_serialize, FAIL); assert(space); switch(space->select.type) { case H5S_SEL_POINTS: /* Sequence of points selected */ ret_value=H5S_point_select_serialize(space,buf); break; case H5S_SEL_HYPERSLABS: /* Hyperslab selection defined */ ret_value=H5S_hyper_select_serialize(space,buf); break; case H5S_SEL_ALL: /* Entire extent selected */ ret_value=H5S_all_select_serialize(space,buf); break; case H5S_SEL_NONE: /* Nothing selected */ ret_value=H5S_none_select_serialize(space,buf); break; case H5S_SEL_ERROR: case H5S_SEL_N: break; } FUNC_LEAVE (ret_value); } /* H5S_select_serialize() */ /*-------------------------------------------------------------------------- NAME H5S_select_deserialize PURPOSE Deserialize the current selection from a user-provided buffer into a real selection in the dataspace. USAGE herr_t H5S_select_deserialize(space, buf) H5S_t *space; IN/OUT: Dataspace pointer to place selection into uint8 *buf; IN: Buffer to retrieve serialized selection from RETURNS Non-negative on success/Negative on failure DESCRIPTION Deserializes the current selection into a buffer. (Primarily for retrieving from disk). This routine just hands off to the appropriate routine for each type of selection. The format of the serialized information is shown in the H5S_select_serialize() header. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5S_select_deserialize (H5S_t *space, const uint8_t *buf) { const uint8_t *tbuf; /* Temporary pointer to the selection type */ uint32_t sel_type; /* Pointer to the selection type */ herr_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5S_select_deserialize, FAIL); assert(space); tbuf=buf; UINT32DECODE(tbuf, sel_type); switch(sel_type) { case H5S_SEL_POINTS: /* Sequence of points selected */ ret_value=H5S_point_select_deserialize(space,buf); break; case H5S_SEL_HYPERSLABS: /* Hyperslab selection defined */ ret_value=H5S_hyper_select_deserialize(space,buf); break; case H5S_SEL_ALL: /* Entire extent selected */ ret_value=H5S_all_select_deserialize(space,buf); break; case H5S_SEL_NONE: /* Nothing selected */ ret_value=H5S_none_select_deserialize(space,buf); break; case H5S_SEL_ERROR: case H5S_SEL_N: break; } FUNC_LEAVE (ret_value); } /* H5S_select_deserialize() */ /*-------------------------------------------------------------------------- NAME H5S_get_select_hyper_nblocks PURPOSE Get the number of hyperslab blocks in current hyperslab selection USAGE hssize_t H5S_get_select_hyper_nblocks(space) H5S_t *space; IN: Dataspace ptr of selection to query RETURNS The number of hyperslab blocks in selection on success, negative on failure DESCRIPTION Returns the number of hyperslab blocks in current selection for dataspace. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ static hssize_t H5S_get_select_hyper_nblocks(H5S_t *space) { hssize_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5S_get_select_hyper_nblocks, FAIL); assert(space); ret_value = space->select.sel_info.hslab.hyper_lst->count; FUNC_LEAVE (ret_value); } /* H5Sget_select_hyper_nblocks() */ /*-------------------------------------------------------------------------- NAME H5Sget_select_hyper_nblocks PURPOSE Get the number of hyperslab blocks in current hyperslab selection USAGE hssize_t H5Sget_select_hyper_nblocks(dsid) hid_t dsid; IN: Dataspace ID of selection to query RETURNS The number of hyperslab blocks in selection on success, negative on failure DESCRIPTION Returns the number of hyperslab blocks in current selection for dataspace. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ hssize_t H5Sget_select_hyper_nblocks(hid_t spaceid) { H5S_t *space = NULL; /* Dataspace to modify selection of */ hssize_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5Sget_select_hyper_nblocks, FAIL); H5TRACE1("Hs","i",spaceid); /* Check args */ if (H5I_DATASPACE != H5I_get_type(spaceid) || NULL == (space=H5I_object(spaceid))) { HRETURN_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space"); } if(space->select.type!=H5S_SEL_HYPERSLABS) HRETURN_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a hyperslab selection"); ret_value = H5S_get_select_hyper_nblocks(space); FUNC_LEAVE (ret_value); } /* H5Sget_select_hyper_nblocks() */ /*-------------------------------------------------------------------------- NAME H5S_get_select_elem_npoints PURPOSE Get the number of points in current element selection USAGE hssize_t H5S_get_select_elem_npoints(space) H5S_t *space; IN: Dataspace ptr of selection to query RETURNS The number of element points in selection on success, negative on failure DESCRIPTION Returns the number of element points in current selection for dataspace. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ static hssize_t H5S_get_select_elem_npoints(H5S_t *space) { hssize_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5S_get_select_elem_npoints, FAIL); assert(space); ret_value = space->select.num_elem; FUNC_LEAVE (ret_value); } /* H5Sget_select_elem_npoints() */ /*-------------------------------------------------------------------------- NAME H5Sget_select_elem_npoints PURPOSE Get the number of points in current element selection USAGE hssize_t H5Sget_select_elem_npoints(dsid) hid_t dsid; IN: Dataspace ID of selection to query RETURNS The number of element points in selection on success, negative on failure DESCRIPTION Returns the number of element points in current selection for dataspace. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ hssize_t H5Sget_select_elem_npoints(hid_t spaceid) { H5S_t *space = NULL; /* Dataspace to modify selection of */ hssize_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5Sget_select_elem_npoints, FAIL); H5TRACE1("Hs","i",spaceid); /* Check args */ if (H5I_DATASPACE != H5I_get_type(spaceid) || NULL == (space=H5I_object(spaceid))) { HRETURN_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space"); } if(space->select.type!=H5S_SEL_POINTS) HRETURN_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not an element selection"); ret_value = H5S_get_select_elem_npoints(space); FUNC_LEAVE (ret_value); } /* H5Sget_select_elem_npoints() */ /*-------------------------------------------------------------------------- NAME H5S_get_select_hyper_blocklist PURPOSE Get the list of hyperslab blocks currently selected USAGE herr_t H5S_get_select_hyper_blocklist(space, hsize_t *buf) H5S_t *space; IN: Dataspace pointer of selection to query hsize_t startblock; IN: Hyperslab block to start with hsize_t numblocks; IN: Number of hyperslab blocks to get hsize_t *buf; OUT: List of hyperslab blocks selected RETURNS Non-negative on success, negative on failure DESCRIPTION Puts a list of the hyperslab blocks into the user's buffer. The blocks start with the 'startblock'th block in the list of blocks and put 'numblocks' number of blocks into the user's buffer (or until the end of the list of blocks, whichever happen first) The block coordinates have the same dimensionality (rank) as the dataspace they are located within. The list of blocks is formatted as follows: <"start" coordinate> immediately followed by <"opposite" corner coordinate>, followed by the next "start" and "opposite" coordinate, etc. until all the block information requested has been put into the user's buffer. No guarantee of any order of the blocks is implied. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ static herr_t H5S_get_select_hyper_blocklist(H5S_t *space, hsize_t startblock, hsize_t numblocks, hsize_t *buf) { H5S_hyper_node_t *node; /* Hyperslab node */ intn rank; /* Dataspace rank */ herr_t ret_value=SUCCEED; /* return value */ FUNC_ENTER (H5S_get_select_hyper_blocklist, FAIL); assert(space); assert(buf); /* Get the dataspace extent rank */ rank=space->extent.u.simple.rank; /* Get the head of the hyperslab list */ node=space->select.sel_info.hslab.hyper_lst->head; /* Get to the correct first node to give back to the user */ while(node!=NULL && startblock>0) { startblock--; node=node->next; } /* end while */ /* Iterate through the node, copying each hyperslab's information */ while(node!=NULL && numblocks>0) { HDmemcpy(buf,node->start,sizeof(hsize_t)*rank); buf+=rank; HDmemcpy(buf,node->end,sizeof(hsize_t)*rank); buf+=rank; numblocks--; node=node->next; } /* end while */ FUNC_LEAVE (ret_value); } /* H5Sget_select_hyper_blocklist() */ /*-------------------------------------------------------------------------- NAME H5Sget_select_hyper_blocklist PURPOSE Get the list of hyperslab blocks currently selected USAGE herr_t H5Sget_select_hyper_blocklist(dsid, hsize_t *buf) hid_t dsid; IN: Dataspace ID of selection to query hsize_t startblock; IN: Hyperslab block to start with hsize_t numblocks; IN: Number of hyperslab blocks to get hsize_t *buf; OUT: List of hyperslab blocks selected RETURNS Non-negative on success, negative on failure DESCRIPTION Puts a list of the hyperslab blocks into the user's buffer. The blocks start with the 'startblock'th block in the list of blocks and put 'numblocks' number of blocks into the user's buffer (or until the end of the list of blocks, whichever happen first) The block coordinates have the same dimensionality (rank) as the dataspace they are located within. The list of blocks is formatted as follows: <"start" coordinate> immediately followed by <"opposite" corner coordinate>, followed by the next "start" and "opposite" coordinate, etc. until all the block information requested has been put into the user's buffer. No guarantee of any order of the blocks is implied. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5Sget_select_hyper_blocklist(hid_t spaceid, hsize_t startblock, hsize_t numblocks, hsize_t *buf) { H5S_t *space = NULL; /* Dataspace to modify selection of */ herr_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5Sget_select_hyper_blocklist, FAIL); H5TRACE4("e","ihh*h",spaceid,startblock,numblocks,buf); /* Check args */ if(buf==NULL) HRETURN_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid pointer"); if (H5I_DATASPACE != H5I_get_type(spaceid) || NULL == (space=H5I_object(spaceid))) { HRETURN_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space"); } if(space->select.type!=H5S_SEL_HYPERSLABS) HRETURN_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a hyperslab selection"); ret_value = H5S_get_select_hyper_blocklist(space,startblock,numblocks,buf); FUNC_LEAVE (ret_value); } /* H5Sget_select_hyper_blocklist() */ /*-------------------------------------------------------------------------- NAME H5S_get_select_elem_pointlist PURPOSE Get the list of element points currently selected USAGE herr_t H5S_get_select_elem_pointlist(space, hsize_t *buf) H5S_t *space; IN: Dataspace pointer of selection to query hsize_t startpoint; IN: Element point to start with hsize_t numpoints; IN: Number of element points to get hsize_t *buf; OUT: List of element points selected RETURNS Non-negative on success, negative on failure DESCRIPTION Puts a list of the element points into the user's buffer. The points start with the 'startpoint'th block in the list of points and put 'numpoints' number of points into the user's buffer (or until the end of the list of points, whichever happen first) The point coordinates have the same dimensionality (rank) as the dataspace they are located within. The list of points is formatted as follows: followed by the next coordinate, etc. until all the point information in the selection have been put into the user's buffer. The points are returned in the order they will be interated through when a selection is read/written from/to disk. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ static herr_t H5S_get_select_elem_pointlist(H5S_t *space, hsize_t startpoint, hsize_t numpoints, hsize_t *buf) { H5S_pnt_node_t *node; /* Point node */ intn rank; /* Dataspace rank */ herr_t ret_value=SUCCEED; /* return value */ FUNC_ENTER (H5S_get_select_elem_pointlist, FAIL); assert(space); assert(buf); /* Get the dataspace extent rank */ rank=space->extent.u.simple.rank; /* Get the head of the point list */ node=space->select.sel_info.pnt_lst->head; /* Iterate to the first point to return */ while(node!=NULL && startpoint>0) { startpoint--; node=node->next; } /* end while */ /* Iterate through the node, copying each hyperslab's information */ node=space->select.sel_info.pnt_lst->head; while(node!=NULL && numpoints>0) { HDmemcpy(buf,node->pnt,sizeof(hsize_t)*rank); buf+=rank; numpoints--; node=node->next; } /* end while */ FUNC_LEAVE (ret_value); } /* H5Sget_select_elem_pointlist() */ /*-------------------------------------------------------------------------- NAME H5Sget_select_elem_pointlist PURPOSE Get the list of element points currently selected USAGE herr_t H5Sget_select_elem_pointlist(dsid, hsize_t *buf) hid_t dsid; IN: Dataspace ID of selection to query hsize_t startpoint; IN: Element point to start with hsize_t numpoints; IN: Number of element points to get hsize_t *buf; OUT: List of element points selected RETURNS Non-negative on success, negative on failure DESCRIPTION Puts a list of the element points into the user's buffer. The points start with the 'startpoint'th block in the list of points and put 'numpoints' number of points into the user's buffer (or until the end of the list of points, whichever happen first) The point coordinates have the same dimensionality (rank) as the dataspace they are located within. The list of points is formatted as follows: followed by the next coordinate, etc. until all the point information in the selection have been put into the user's buffer. The points are returned in the order they will be interated through when a selection is read/written from/to disk. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5Sget_select_elem_pointlist(hid_t spaceid, hsize_t startpoint, hsize_t numpoints, hsize_t *buf) { H5S_t *space = NULL; /* Dataspace to modify selection of */ herr_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5Sget_select_elem_pointlist, FAIL); H5TRACE4("e","ihh*h",spaceid,startpoint,numpoints,buf); /* Check args */ if(buf==NULL) HRETURN_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid pointer"); if (H5I_DATASPACE != H5I_get_type(spaceid) || NULL == (space=H5I_object(spaceid))) { HRETURN_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space"); } if(space->select.type!=H5S_SEL_POINTS) HRETURN_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a point selection"); ret_value = H5S_get_select_elem_pointlist(space,startpoint,numpoints,buf); FUNC_LEAVE (ret_value); } /* H5Sget_select_elem_pointlist() */ /*-------------------------------------------------------------------------- NAME H5S_get_select_bounds PURPOSE Gets the bounding box containing the selection. USAGE herr_t H5S_get_select_bounds(space, hsize_t *start, hsize_t *end) H5S_t *space; IN: Dataspace pointer of selection to query hsize_t *start; OUT: Starting coordinate of bounding box hsize_t *end; OUT: Opposite coordinate of bounding box RETURNS Non-negative on success, negative on failure DESCRIPTION Retrieves the bounding box containing the current selection and places it into the user's buffers. The start and end buffers must be large enough to hold the dataspace rank number of coordinates. The bounding box exactly contains the selection, ie. if a 2-D element selection is currently defined with the following points: (4,5), (6,8) (10,7), the bounding box with be (4, 5), (10, 8). Calling this function on a "none" selection returns fail. The bounding box calculations _does_ include the current offset of the selection within the dataspace extent. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ static herr_t H5S_get_select_bounds(H5S_t *space, hsize_t *start, hsize_t *end) { intn rank; /* Dataspace rank */ intn i; /* index variable */ herr_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5S_get_select_bounds, FAIL); assert(space); assert(start); assert(end); /* Set all the start and end arrays up */ rank=space->extent.u.simple.rank; for(i=0; iselect.type) { case H5S_SEL_POINTS: /* Sequence of points selected */ ret_value=H5S_point_bounds(space,start,end); break; case H5S_SEL_HYPERSLABS: /* Hyperslab selection defined */ ret_value=H5S_hyper_bounds(space,start,end); break; case H5S_SEL_ALL: /* Entire extent selected */ ret_value=H5S_all_bounds(space,start,end); break; case H5S_SEL_NONE: /* Nothing selected */ case H5S_SEL_ERROR: case H5S_SEL_N: break; } FUNC_LEAVE (ret_value); } /* H5S_get_select_bounds() */ /*-------------------------------------------------------------------------- NAME H5Sget_select_bounds PURPOSE Gets the bounding box containing the selection. USAGE herr_t H5S_get_select_bounds(space, start, end) hid_t dsid; IN: Dataspace ID of selection to query hsize_t *start; OUT: Starting coordinate of bounding box hsize_t *end; OUT: Opposite coordinate of bounding box RETURNS Non-negative on success, negative on failure DESCRIPTION Retrieves the bounding box containing the current selection and places it into the user's buffers. The start and end buffers must be large enough to hold the dataspace rank number of coordinates. The bounding box exactly contains the selection, ie. if a 2-D element selection is currently defined with the following points: (4,5), (6,8) (10,7), the bounding box with be (4, 5), (10, 8). Calling this function on a "none" selection returns fail. The bounding box calculations _does_ include the current offset of the selection within the dataspace extent. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ herr_t H5Sget_select_bounds(hid_t spaceid, hsize_t *start, hsize_t *end) { H5S_t *space = NULL; /* Dataspace to modify selection of */ herr_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5Sget_select_bounds, FAIL); H5TRACE3("e","i*h*h",spaceid,start,end); /* Check args */ if(start==NULL || end==NULL) HRETURN_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid pointer"); if (H5I_DATASPACE != H5I_get_type(spaceid) || NULL == (space=H5I_object(spaceid))) { HRETURN_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data space"); } ret_value = H5S_get_select_bounds(space,start,end); FUNC_LEAVE (ret_value); } /* H5Sget_select_bounds() */ /*-------------------------------------------------------------------------- NAME H5S_select_contiguous PURPOSE Check if the selection is contiguous within the dataspace extent. USAGE htri_t H5S_select_contiguous(space) H5S_t *space; IN: Dataspace pointer to check RETURNS TRUE/FALSE/FAIL DESCRIPTION Checks to see if the current selection in the dataspace is contiguous. This is primarily used for reading the entire selection in one swoop. GLOBAL VARIABLES COMMENTS, BUGS, ASSUMPTIONS EXAMPLES REVISION LOG --------------------------------------------------------------------------*/ htri_t H5S_select_contiguous(const H5S_t *space) { htri_t ret_value=FAIL; /* return value */ FUNC_ENTER (H5S_select_contiguous, FAIL); assert(space); switch(space->select.type) { case H5S_SEL_POINTS: /* Sequence of points selected */ ret_value=H5S_point_select_contiguous(space); break; case H5S_SEL_HYPERSLABS: /* Hyperslab selection defined */ ret_value=H5S_hyper_select_contiguous(space); break; case H5S_SEL_ALL: /* Entire extent selected */ ret_value=TRUE; break; case H5S_SEL_NONE: /* Nothing selected */ ret_value=FALSE; break; case H5S_SEL_ERROR: case H5S_SEL_N: break; } FUNC_LEAVE (ret_value); } /* H5S_select_contiguous() */ /*-------------------------------------------------------------------------- NAME H5S_iterate PURPOSE Iterate over the selected elements in a memory buffer. USAGE herr_t H5S_select_iterate(buf, type_id, space, operator, operator_data) void *buf; IN/OUT: Buffer containing elements to iterate over hid_t type_id; IN: Datatype ID of BUF array. H5S_t *space; IN: Dataspace object containing selection to iterate over H5D_operator_t op; IN: Function pointer to the routine to be called for each element in BUF iterated over. void *operator_data; IN/OUT: Pointer to any user-defined data associated with the operation. RETURNS Returns the return value of the last operator if it was non-zero, or zero if all elements were processed. Otherwise returns a negative value. DESCRIPTION Iterates over the selected elements in a memory buffer, calling the user's callback function for each element. The selection in the dataspace is modified so that any elements already iterated over are removed from the selection if the iteration is interrupted (by the H5D_operator_t function returning non-zero) in the "middle" of the iteration and may be re-started by the user where it left off. NOTE: Until "subtracting" elements from a selection is implemented, the selection is not modified. --------------------------------------------------------------------------*/ herr_t H5S_select_iterate(void *buf, hid_t type_id, H5S_t *space, H5D_operator_t op, void *operator_data) { herr_t ret_value=FAIL; FUNC_ENTER(H5S_select_iterate, FAIL); /* Check args */ assert(buf); assert(space); assert(op); assert(H5I_DATATYPE == H5I_get_type(type_id)); switch(space->select.type) { case H5S_SEL_POINTS: /* Sequence of points selected */ ret_value=H5S_point_select_iterate(buf,type_id,space,op,operator_data); break; case H5S_SEL_HYPERSLABS: /* Hyperslab selection defined */ ret_value=H5S_hyper_select_iterate(buf,type_id,space,op,operator_data); break; case H5S_SEL_ALL: /* Entire extent selected */ ret_value=H5S_all_select_iterate(buf,type_id,space,op,operator_data); break; case H5S_SEL_NONE: /* Nothing selected */ ret_value=H5S_none_select_iterate(buf,type_id,space,op,operator_data); break; case H5S_SEL_ERROR: case H5S_SEL_N: break; } FUNC_LEAVE(ret_value); } /* end H5S_select_iterate() */