/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Module Info: Data type conversions for the H5T interface. */ #define H5T_PACKAGE /*suppress error about including H5Tpkg */ #include "H5private.h" /*generic functions */ #include "H5Eprivate.h" /*error handling */ #include "H5FLprivate.h" /*Free Lists */ #include "H5Iprivate.h" /*ID functions */ #include "H5MMprivate.h" /*memory management */ #include "H5Pprivate.h" /* Property Lists */ #include "H5Dprivate.h" /* Dataset */ #include "H5Tpkg.h" /*data-type functions */ /* Conversion data for H5T_conv_struct() */ typedef struct H5T_conv_struct_t { int *src2dst; /*mapping from src to dst member num */ hid_t *src_memb_id; /*source member type ID's */ hid_t *dst_memb_id; /*destination member type ID's */ H5T_path_t **memb_path; /*conversion path for each member */ } H5T_conv_struct_t; /* Conversion data for H5T_conv_enum() */ typedef struct H5T_enum_struct_t { int base; /*lowest `in' value */ int length; /*num elements in arrays */ int *src2dst; /*map from src to dst index */ } H5T_enum_struct_t; /* Conversion data for the hardware conversion functions */ typedef struct H5T_conv_hw_t { size_t s_aligned; /*number source elements aligned */ size_t d_aligned; /*number destination elements aligned*/ } H5T_conv_hw_t; /* Declare a free list to manage pieces of vlen data */ H5FL_BLK_DEFINE_STATIC(vlen_seq); /* Declare a free list to manage pieces of array data */ H5FL_BLK_DEFINE_STATIC(array_seq); /* * These macros are for the bodies of functions that convert buffers of one * atomic type to another using hardware. * * They all start with `H5T_CONV_' and end with two letters that represent the * source and destination types, respectively. The letters `s' and `S' refer to * signed integers while the letters `u' and `U' refer to unsigned integers, and * the letters `f' and `F' refer to floating-point values. * * The letter which is capitalized indicates that the corresponding type * (source or destination) is at least as large as the other type. * * Certain conversions may experience overflow conditions which arise when the * source value has a magnitude that cannot be represented by the destination * type. * * Suffix Description * ------ ----------- * sS: Signed integers to signed integers where the destination is * at least as wide as the source. This case cannot generate * overflows. * * sU: Signed integers to unsigned integers where the destination is * at least as wide as the source. This case experiences * overflows when the source value is negative. * * uS: Unsigned integers to signed integers where the destination is * at least as wide as the source. This case can experience * overflows when the source and destination are the same size. * * uU: Unsigned integers to unsigned integers where the destination * is at least as wide as the source. Overflows are not * possible in this case. * * Ss: Signed integers to signed integers where the source is at * least as large as the destination. Overflows can occur when * the destination is narrower than the source. * * Su: Signed integers to unsigned integers where the source is at * least as large as the destination. Overflows occur when the * source value is negative and can also occur if the * destination is narrower than the source. * * Us: Unsigned integers to signed integers where the source is at * least as large as the destination. Overflows can occur for * all sizes. * * Uu: Unsigned integers to unsigned integers where the source is at * least as large as the destination. Overflows can occur if the * destination is narrower than the source. * * su: Conversion from signed integers to unsigned integers where * the source and destination are the same size. Overflow occurs * when the source value is negative. * * us: Conversion from unsigned integers to signed integers where * the source and destination are the same size. Overflow * occurs when the source magnitude is too large for the * destination. * * fF: Floating-point values to floating-point values where the * destination is at least as wide as the source. This case * cannot generate overflows. * * Ff: Floating-point values to floating-point values the source is at * least as large as the destination. Overflows can occur when * the destination is narrower than the source. * * xF: Integers to float-point(float or double) values where the desination * is at least as wide as the source. This case cannot generate * overflows. * * Fx: Float-point(float or double) values to integer where the source is * at least as wide as the destination. Overflow can occur * when the source magnitude is too large for the destination. * * The macros take a subset of these arguments in the order listed here: * * CDATA: A pointer to the H5T_cdata_t structure that was passed to the * conversion function. * * STYPE: The hid_t value for the source data type. * * DTYPE: The hid_t value for the destination data type. * * BUF: A pointer to the conversion buffer. * * NELMTS: The number of values to be converted. * * ST: The C name for source data type (e.g., int) * * DT: The C name for the destination data type (e.g., signed char) * * D_MIN: The minimum possible destination value. For unsigned * destination types this should be zero. For signed * destination types it's a negative value with a magnitude that * is usually one greater than D_MAX. Source values which are * smaller than D_MIN generate overflows. * * D_MAX: The maximum possible destination value. Source values which * are larger than D_MAX generate overflows. * * The macros are implemented with a generic programming technique, similar * to templates in C++. The macro which defines the "core" part of the * conversion (which actually moves the data from the source to the destination) * is invoked inside the H5T_CONV "template" macro by "gluing" it together, * which allows the core conversion macro to be invoked as necessary. * * The generic "core" macros are: (others are specific to particular conversion) * * Suffix Description * ------ ----------- * xX: Generic Conversion where the destination is at least as * wide as the source. This case cannot generate overflows. * * Xx: Generic signed conversion where the source is at least as large * as the destination. Overflows can occur when the destination is * narrower than the source. * * Ux: Generic conversion for the `Us', `Uu' & `us' cases * Overflow occurs when the source magnitude is too large for the * destination. * */ #define H5T_CONV_xX_CORE(S,D,STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ *((DT*)D) = (DT)(*((ST*)S)); \ } #define H5T_CONV_Xx_CORE(S,D,STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ if (*((ST*)S) > (DT)(D_MAX)) { \ if(cb_struct.func) { \ H5T_conv_ret_t except_ret; /*callback return*/ \ \ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, \ src_id, dst_id, S, D, cb_struct.user_data); \ if(except_ret == H5T_CONV_UNHANDLED) \ /* Let compiler convert if case is ignored by user handler*/ \ *((DT*)D) = (D_MAX); \ else if(except_ret == H5T_CONV_ABORT) \ HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") \ /* if(except_ret==H5T_CONV_HANDLED): Fall through, user handled it */ \ } \ else \ *((DT*)D) = (D_MAX); \ } else if (*((ST*)S) < (D_MIN)) { \ if(cb_struct.func) { \ H5T_conv_ret_t except_ret; /*callback return*/ \ \ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_LOW, \ src_id, dst_id, S, D, cb_struct.user_data); \ if(except_ret == H5T_CONV_UNHANDLED) \ /* Let compiler convert if case is ignored by user handler*/ \ *((DT*)D) = (D_MIN); \ else if(except_ret == H5T_CONV_ABORT) \ HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") \ /* if(except_ret==H5T_CONV_HANDLED): Fall through, user handled it */ \ } \ else \ *((DT*)D) = (D_MIN); \ } else \ *((DT*)D) = (DT)(*((ST*)S)); \ } #define H5T_CONV_Ux_CORE(S,D,STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ if (*((ST*)S) > (DT)(D_MAX)) { \ if(cb_struct.func) { \ H5T_conv_ret_t except_ret; /*callback return*/ \ \ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, \ src_id, dst_id, S, D, cb_struct.user_data); \ if(except_ret == H5T_CONV_UNHANDLED) \ /* Let compiler convert if case is ignored by user handler*/ \ *((DT*)D) = (D_MAX); \ else if(except_ret == H5T_CONV_ABORT) \ HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") \ /* if(except_ret==H5T_CONV_HANDLED): Fall through, user handled it */ \ } \ else \ *((DT*)D) = (D_MAX); \ } else \ *((DT*)D) = (DT)(*((ST*)S)); \ } #define H5T_CONV_sS(STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ assert(sizeof(ST)<=sizeof(DT)); \ H5T_CONV(H5T_CONV_xX, long_long, STYPE, DTYPE, ST, DT, D_MIN, D_MAX) \ } #define H5T_CONV_sU_CORE(S,D,STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ if (*((ST*)S) < 0) { \ if(cb_struct.func) { \ H5T_conv_ret_t except_ret; /*callback return*/ \ \ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_LOW, \ src_id, dst_id, S, D, cb_struct.user_data); \ if(except_ret == H5T_CONV_UNHANDLED) \ /* Let compiler convert if case is ignored by user handler*/ \ *((DT*)D) = 0; \ else if(except_ret == H5T_CONV_ABORT) \ HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") \ /* if(except_ret==H5T_CONV_HANDLED): Fall through, user handled it */ \ } \ else \ *((DT*)D) = 0; \ } else \ *((DT*)D) = (DT)(*((ST*)S)); \ } #define H5T_CONV_sU(STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ assert(sizeof(ST)<=sizeof(DT)); \ H5T_CONV(H5T_CONV_sU, long_long, STYPE, DTYPE, ST, DT, D_MIN, D_MAX) \ } #define H5T_CONV_uS_CORE(S,D,STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ if (sizeof(ST)==sizeof(DT) && *((ST*)S) > (D_MAX)) { \ if(cb_struct.func) { \ H5T_conv_ret_t except_ret; /*callback return*/ \ \ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, \ src_id, dst_id, S, D, cb_struct.user_data); \ if(except_ret == H5T_CONV_UNHANDLED) \ /* Let compiler convert if case is ignored by user handler*/ \ *((DT*)D) = (D_MAX); \ else if(except_ret == H5T_CONV_ABORT) \ HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") \ /* if(except_ret==H5T_CONV_HANDLED): Fall through, user handled it */ \ } \ else \ *((DT*)D) = (D_MAX); \ } else \ *((DT*)D) = (DT)(*((ST*)S)); \ } #define H5T_CONV_uS(STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ assert(sizeof(ST)<=sizeof(DT)); \ H5T_CONV(H5T_CONV_uS, long_long, STYPE, DTYPE, ST, DT, D_MIN, D_MAX) \ } #define H5T_CONV_uU(STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ assert(sizeof(ST)<=sizeof(DT)); \ H5T_CONV(H5T_CONV_xX, long_long, STYPE, DTYPE, ST, DT, D_MIN, D_MAX) \ } #define H5T_CONV_Ss(STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ assert(sizeof(ST)>=sizeof(DT)); \ H5T_CONV(H5T_CONV_Xx, long_long, STYPE, DTYPE, ST, DT, D_MIN, D_MAX) \ } #define H5T_CONV_Su_CORE(S,D,STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ if (*((ST*)S) < 0) { \ if(cb_struct.func) { \ H5T_conv_ret_t except_ret; /*callback return*/ \ \ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_LOW, \ src_id, dst_id, S, D, cb_struct.user_data); \ if(except_ret == H5T_CONV_UNHANDLED) \ /* Let compiler convert if case is ignored by user handler*/ \ *((DT*)D) = 0; \ else if(except_ret == H5T_CONV_ABORT) \ HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") \ /* if(except_ret==H5T_CONV_HANDLED): Fall through, user handled it */ \ } \ else \ *((DT*)D) = 0; \ } else if (sizeof(ST)>sizeof(DT) && *((ST*)S) > (D_MAX)) { \ if(cb_struct.func) { \ H5T_conv_ret_t except_ret; /*callback return*/ \ \ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, \ src_id, dst_id, S, D, cb_struct.user_data); \ if(except_ret == H5T_CONV_UNHANDLED) \ /* Let compiler convert if case is ignored by user handler*/ \ *((DT*)D) = (D_MAX); \ else if(except_ret == H5T_CONV_ABORT) \ HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") \ /* if(except_ret==H5T_CONV_HANDLED): Fall through, user handled it */ \ } \ else \ *((DT*)D) = (D_MAX); \ } else \ *((DT*)D) = (DT)(*((ST*)S)); \ } #define H5T_CONV_Su(STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ assert(sizeof(ST)>=sizeof(DT)); \ H5T_CONV(H5T_CONV_Su, long_long, STYPE, DTYPE, ST, DT, D_MIN, D_MAX) \ } #define H5T_CONV_Us(STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ assert(sizeof(ST)>=sizeof(DT)); \ H5T_CONV(H5T_CONV_Ux, long_long, STYPE, DTYPE, ST, DT, D_MIN, D_MAX) \ } #define H5T_CONV_Uu(STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ assert(sizeof(ST)>=sizeof(DT)); \ H5T_CONV(H5T_CONV_Ux, long_long, STYPE, DTYPE, ST, DT, D_MIN, D_MAX) \ } #define H5T_CONV_su_CORE(S,D,STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ /* Assumes memory format of unsigned & signed integers is same */ \ if (*((ST*)S) < 0) { \ if(cb_struct.func) { \ H5T_conv_ret_t except_ret; /*callback return*/ \ \ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_LOW, \ src_id, dst_id, S, D, cb_struct.user_data); \ if(except_ret == H5T_CONV_UNHANDLED) \ /* Let compiler convert if case is ignored by user handler*/ \ *((DT*)D) = 0; \ else if(except_ret == H5T_CONV_ABORT) \ HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") \ /* if(except_ret==H5T_CONV_HANDLED): Fall through, user handled it */ \ } \ else \ *((DT*)D) = 0; \ } \ } #define H5T_CONV_su(STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ assert(sizeof(ST)==sizeof(DT)); \ H5T_CONV(H5T_CONV_su, long_long, STYPE, DTYPE, ST, DT, D_MIN, D_MAX) \ } #define H5T_CONV_us_CORE(S,D,STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ /* Assumes memory format of unsigned & signed integers is same */ \ if (*((ST*)S) > (D_MAX)) { \ if(cb_struct.func) { \ H5T_conv_ret_t except_ret; /*callback return*/ \ \ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, \ src_id, dst_id, S, D, cb_struct.user_data); \ if(except_ret == H5T_CONV_UNHANDLED) \ /* Let compiler convert if case is ignored by user handler*/ \ *((DT*)D) = (D_MAX); \ else if(except_ret == H5T_CONV_ABORT) \ HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") \ /* if(except_ret==H5T_CONV_HANDLED): Fall through, user handled it */ \ } \ else \ *((DT*)D) = (D_MAX); \ } \ } #define H5T_CONV_us(STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ assert(sizeof(ST)==sizeof(DT)); \ H5T_CONV(H5T_CONV_us, long_long, STYPE, DTYPE, ST, DT, D_MIN, D_MAX) \ } #define H5T_CONV_fF(STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ assert(sizeof(ST)<=sizeof(DT)); \ H5T_CONV(H5T_CONV_xX, double, STYPE, DTYPE, ST, DT, D_MIN, D_MAX) \ } /* Same as H5T_CONV_Xx_CORE, except that instead of using D_MAX and D_MIN * when an overflow occurs, use the 'float' infinity values. */ #define H5T_CONV_Ff_CORE(S,D,STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ if (*((ST*)S) > (DT)(D_MAX)) { \ if(cb_struct.func) { \ H5T_conv_ret_t except_ret; /*callback return*/ \ \ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, \ src_id, dst_id, S, D, cb_struct.user_data); \ if(except_ret == H5T_CONV_UNHANDLED) \ /* Let compiler convert if case is ignored by user handler*/ \ *((DT*)D) = (H5T_NATIVE_FLOAT_POS_INF_g); \ else if(except_ret == H5T_CONV_ABORT) \ HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") \ /* if(except_ret==H5T_CONV_HANDLED): Fall through, user handled it */ \ } \ else \ *((DT*)D) = (H5T_NATIVE_FLOAT_POS_INF_g); \ } else if (*((ST*)S) < (D_MIN)) { \ if(cb_struct.func) { \ H5T_conv_ret_t except_ret; /*callback return*/ \ \ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_LOW, \ src_id, dst_id, S, D, cb_struct.user_data); \ if(except_ret == H5T_CONV_UNHANDLED) \ /* Let compiler convert if case is ignored by user handler*/ \ *((DT*)D) = (H5T_NATIVE_FLOAT_NEG_INF_g); \ else if(except_ret == H5T_CONV_ABORT) \ HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") \ /* if(except_ret==H5T_CONV_HANDLED): Fall through, user handled it */ \ } \ else \ *((DT*)D) = (H5T_NATIVE_FLOAT_NEG_INF_g); \ } else \ *((DT*)D) = (DT)(*((ST*)S)); \ } #define H5T_CONV_Ff(STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ assert(sizeof(ST)>=sizeof(DT)); \ H5T_CONV(H5T_CONV_Ff, double, STYPE, DTYPE, ST, DT, D_MIN, D_MAX) \ } #define H5T_CONV_xF(STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ H5T_CONV(H5T_CONV_xX, long double, STYPE, DTYPE, ST, DT, D_MIN, D_MAX) \ } #define H5T_CONV_Fx(STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ H5T_CONV(H5T_CONV_Xx, long double, STYPE, DTYPE, ST, DT, D_MIN, D_MAX) \ } /* The main part of every integer hardware conversion macro */ #define H5T_CONV(GUTS,ATYPE,STYPE,DTYPE,ST,DT,D_MIN,D_MAX) { \ size_t elmtno; /*element number */ \ uint8_t *src, *s; /*source buffer */ \ uint8_t *dst, *d; /*destination buffer */ \ H5T_t *st, *dt; /*data type descriptors */ \ ATYPE aligned; /*aligned type */ \ hbool_t s_mv, d_mv; /*move data to align it? */ \ ssize_t s_stride, d_stride; /*src and dst strides */ \ size_t safe; /*how many elements are safe to process in each pass */ \ H5P_genplist_t *plist; /*Property list pointer */ \ H5T_conv_cb_t cb_struct; /*conversion callback structure */ \ \ switch (cdata->command) { \ case H5T_CONV_INIT: \ /* Sanity check and initialize statistics */ \ cdata->need_bkg = H5T_BKG_NO; \ if (NULL==(st=H5I_object(src_id)) || NULL==(dt=H5I_object(dst_id))) \ HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, \ "unable to dereference datatype object ID") \ if (st->shared->size!=sizeof(ST) || dt->shared->size!=sizeof(DT)) \ HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, \ "disagreement about datatype size") \ CI_ALLOC_PRIV \ break; \ \ case H5T_CONV_FREE: \ /* Print and free statistics */ \ CI_PRINT_STATS(STYPE,DTYPE); \ CI_FREE_PRIV \ break; \ \ case H5T_CONV_CONV: \ /* Initialize source & destination strides */ \ if (buf_stride) { \ assert(buf_stride>=sizeof(ST)); \ assert(buf_stride>=sizeof(DT)); \ H5_CHECK_OVERFLOW(buf_stride,size_t,ssize_t); \ s_stride = d_stride = (ssize_t)buf_stride; \ } else { \ s_stride = sizeof(ST); \ d_stride = sizeof(DT); \ } \ \ /* Is alignment required for source or dest? */ \ s_mv = H5T_NATIVE_##STYPE##_ALIGN_g>1 && \ ((size_t)buf%H5T_NATIVE_##STYPE##_ALIGN_g || \ /* Cray */ ((size_t)((ST*)buf)!=(size_t)buf) || \ s_stride%H5T_NATIVE_##STYPE##_ALIGN_g); \ d_mv = H5T_NATIVE_##DTYPE##_ALIGN_g>1 && \ ((size_t)buf%H5T_NATIVE_##DTYPE##_ALIGN_g || \ /* Cray */ ((size_t)((DT*)buf)!=(size_t)buf) || \ d_stride%H5T_NATIVE_##DTYPE##_ALIGN_g); \ CI_INC_SRC(s_mv) \ CI_INC_DST(d_mv) \ \ /* Get the plist structure */ \ if(NULL == (plist = H5P_object_verify(dxpl_id,H5P_DATASET_XFER))) \ HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find property list for ID"); \ \ /* Get conversion exception callback property */ \ if (H5P_get(plist,H5D_XFER_CONV_CB_NAME,&cb_struct)<0) \ HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "unable to get conversion exception callback"); \ \ /* The outer loop of the type conversion macro, controlling which */ \ /* direction the buffer is walked */ \ while (nelmts>0) { \ /* Check if we need to go backwards through the buffer */ \ if(d_stride>s_stride) { \ /* Compute the number of "safe" destination elements at */ \ /* the end of the buffer (Those which don't overlap with */ \ /* any source elements at the beginning of the buffer) */ \ safe=nelmts-(((nelmts*s_stride)+(d_stride-1))/d_stride); \ \ /* If we're down to the last few elements, just wrap up */ \ /* with a "real" reverse copy */ \ if(safe<2) { \ src = (uint8_t*)buf+(nelmts-1)*s_stride; \ dst = (uint8_t*)buf+(nelmts-1)*d_stride; \ s_stride = -s_stride; \ d_stride = -d_stride; \ \ safe=nelmts; \ } /* end if */ \ else { \ src = (uint8_t*)buf+(nelmts-safe)*s_stride; \ dst = (uint8_t*)buf+(nelmts-safe)*d_stride; \ } /* end else */ \ } /* end if */ \ else { \ /* Single forward pass over all data */ \ src = dst = buf; \ safe=nelmts; \ } /* end else */ \ \ /* Perform loop over elements to convert */ \ if (s_mv && d_mv) { \ /* Alignment is required for both source and dest */ \ s = (uint8_t*)&aligned; \ H5T_CONV_LOOP(PRE_SALIGN,PRE_DALIGN,POST_SALIGN,POST_DALIGN,GUTS,s,d,STYPE,DTYPE,ST,DT,D_MIN,D_MAX) \ } else if(s_mv) { \ /* Alignment is required only for source */ \ s = (uint8_t*)&aligned; \ H5T_CONV_LOOP(PRE_SALIGN,PRE_DNOALIGN,POST_SALIGN,POST_DNOALIGN,GUTS,s,dst,STYPE,DTYPE,ST,DT,D_MIN,D_MAX) \ } else if(d_mv) { \ /* Alignment is required only for destination */ \ H5T_CONV_LOOP(PRE_SNOALIGN,PRE_DALIGN,POST_SNOALIGN,POST_DALIGN,GUTS,src,d,STYPE,DTYPE,ST,DT,D_MIN,D_MAX) \ } else { \ /* Alignment is not required for both source and destination */ \ H5T_CONV_LOOP(PRE_SNOALIGN,PRE_DNOALIGN,POST_SNOALIGN,POST_DNOALIGN,GUTS,src,dst,STYPE,DTYPE,ST,DT,D_MIN,D_MAX) \ } \ \ /* Decrement number of elements left to convert */ \ nelmts-=safe; \ } /* end while */ \ break; \ \ default: \ HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, \ "unknown conversion command"); \ } \ } /* Macro defining action on source data which needs to be aligned (before main action) */ #define H5T_CONV_LOOP_PRE_SALIGN(ST) { \ HDmemcpy(&aligned, src, sizeof(ST)); \ } /* Macro defining action on source data which doesn't need to be aligned (before main action) */ #define H5T_CONV_LOOP_PRE_SNOALIGN(ST) { \ } /* Macro defining action on destination data which needs to be aligned (before main action) */ #define H5T_CONV_LOOP_PRE_DALIGN(DT) { \ d = (uint8_t*)&aligned; \ } /* Macro defining action on destination data which doesn't need to be aligned (before main action) */ #define H5T_CONV_LOOP_PRE_DNOALIGN(DT) { \ } /* Macro defining action on source data which needs to be aligned (after main action) */ #define H5T_CONV_LOOP_POST_SALIGN(ST) { \ } /* Macro defining action on source data which doesn't need to be aligned (after main action) */ #define H5T_CONV_LOOP_POST_SNOALIGN(ST) { \ } /* Macro defining action on destination data which needs to be aligned (after main action) */ #define H5T_CONV_LOOP_POST_DALIGN(DT) { \ HDmemcpy(dst, &aligned, sizeof(DT)); \ } /* Macro defining action on destination data which doesn't need to be aligned (after main action) */ #define H5T_CONV_LOOP_POST_DNOALIGN(DT) { \ } /* The inner loop of the type conversion macro, actually converting the elements */ #define H5T_CONV_LOOP(PRE_SALIGN_GUTS,PRE_DALIGN_GUTS,POST_SALIGN_GUTS,POST_DALIGN_GUTS,GUTS,S,D,STYPE,DTYPE,ST,DT,D_MIN,D_MAX) \ for (elmtno=0; elmtnopriv)->s_aligned) { \ HDfprintf(H5DEBUG(T), \ " %Hu src elements aligned on %lu-byte boundaries\n", \ ((H5T_conv_hw_t *)cdata->priv)->s_aligned, \ (unsigned long)H5T_NATIVE_##STYPE##_ALIGN_g); \ } \ if (H5DEBUG(T) && ((H5T_conv_hw_t *)cdata->priv)->d_aligned) { \ HDfprintf(H5DEBUG(T), \ " %Hu dst elements aligned on %lu-byte boundaries\n", \ ((H5T_conv_hw_t *)cdata->priv)->d_aligned, \ (unsigned long)H5T_NATIVE_##DTYPE##_ALIGN_g); \ } \ } /* Allocate private alignment structure for atomic types */ # define CI_ALLOC_PRIV \ if (NULL==(cdata->priv=H5MM_calloc(sizeof(H5T_conv_hw_t)))) { \ HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, \ "memory allocation failed"); \ } /* Free private alignment structure for atomic types */ # define CI_FREE_PRIV \ if(cdata->priv!=NULL) \ cdata->priv = H5MM_xfree(cdata->priv); /* Increment source alignment counter */ # define CI_INC_SRC(s) if (s) ((H5T_conv_hw_t *)cdata->priv)->s_aligned += nelmts; /* Increment destination alignment counter */ # define CI_INC_DST(d) if (d) ((H5T_conv_hw_t *)cdata->priv)->d_aligned += nelmts; #else /* H5T_DEBUG */ # define CI_PRINT_STATS(STYPE,DTYPE) /*void*/ # define CI_ALLOC_PRIV cdata->priv=NULL; # define CI_FREE_PRIV /* void */ # define CI_INC_SRC(s) /* void */ # define CI_INC_DST(d) /* void */ #endif /* H5T_DEBUG */ /* Swap two elements (I & J) of an array using a temporary variable */ #define H5_SWAP_BYTES(ARRAY,I,J) {uint8_t _tmp; _tmp=ARRAY[I]; ARRAY[I]=ARRAY[J]; ARRAY[J]=_tmp;} /* Minimum size of variable-length conversion buffer */ #define H5T_VLEN_MIN_CONF_BUF_SIZE 4096 static herr_t H5T_reverse_order(uint8_t *rev, uint8_t *s, size_t size, H5T_order_t order); /*------------------------------------------------------------------------- * Function: H5T_conv_noop * * Purpose: The no-op conversion. The library knows about this * conversion without it being registered. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Wednesday, January 14, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_noop(hid_t UNUSED src_id, hid_t UNUSED dst_id, H5T_cdata_t *cdata, size_t UNUSED nelmts, size_t UNUSED buf_stride, size_t UNUSED bkg_stride, void UNUSED *buf, void UNUSED *background, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_noop, FAIL); switch (cdata->command) { case H5T_CONV_INIT: cdata->need_bkg = H5T_BKG_NO; break; case H5T_CONV_CONV: /* Nothing to convert */ break; case H5T_CONV_FREE: break; default: HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unknown conversion command"); } done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_order_opt * * Purpose: Convert one type to another when byte order is the only * difference. This is the optimized version of H5T_conv_order() * for a handful of different sizes. * * Note: This is a soft conversion function. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Friday, January 25, 2002 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_order_opt(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *_buf, void UNUSED *background, hid_t UNUSED dxpl_id) { uint8_t *buf = (uint8_t*)_buf; H5T_t *src = NULL; H5T_t *dst = NULL; size_t i; herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_order_opt, FAIL); switch (cdata->command) { case H5T_CONV_INIT: /* Capability query */ if (NULL == (src = H5I_object(src_id)) || NULL == (dst = H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); if (src->shared->size != dst->shared->size || 0 != src->shared->u.atomic.offset || 0 != dst->shared->u.atomic.offset) HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "conversion not supported"); if((src->shared->type==H5T_REFERENCE && dst->shared->type!=H5T_REFERENCE) || (dst->shared->type==H5T_REFERENCE && src->shared->type!=H5T_REFERENCE)) HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "conversion not supported"); if(src->shared->type!=H5T_REFERENCE && !((H5T_ORDER_BE == src->shared->u.atomic.order && H5T_ORDER_LE == dst->shared->u.atomic.order) || (H5T_ORDER_LE == src->shared->u.atomic.order && H5T_ORDER_BE == dst->shared->u.atomic.order))) HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "conversion not supported"); if (src->shared->size!=1 && src->shared->size!=2 && src->shared->size!=4 && src->shared->size!=8 && src->shared->size!=16) HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "conversion not supported"); switch (src->shared->type) { case H5T_INTEGER: case H5T_BITFIELD: case H5T_REFERENCE: /* nothing to check */ break; case H5T_FLOAT: if (src->shared->u.atomic.u.f.sign != dst->shared->u.atomic.u.f.sign || src->shared->u.atomic.u.f.epos != dst->shared->u.atomic.u.f.epos || src->shared->u.atomic.u.f.esize != dst->shared->u.atomic.u.f.esize || src->shared->u.atomic.u.f.ebias != dst->shared->u.atomic.u.f.ebias || src->shared->u.atomic.u.f.mpos != dst->shared->u.atomic.u.f.mpos || src->shared->u.atomic.u.f.msize != dst->shared->u.atomic.u.f.msize || src->shared->u.atomic.u.f.norm != dst->shared->u.atomic.u.f.norm || src->shared->u.atomic.u.f.pad != dst->shared->u.atomic.u.f.pad) HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "conversion not supported"); break; default: HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "conversion not supported"); } cdata->need_bkg = H5T_BKG_NO; break; case H5T_CONV_CONV: /* The conversion */ if (NULL == (src = H5I_object(src_id)) || NULL == (dst = H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); /* Check for "no op" reference conversion */ if(src->shared->type==H5T_REFERENCE) { /* Sanity check */ assert(dst->shared->type==H5T_REFERENCE); /* Check if we are on a little-endian machine (the order that * the addresses in the file must be) and just get out now, there * is no need to convert the object reference. Yes, this is * icky and non-portable, but I can't think of a better way to * support allowing the objno in the H5G_stat_t struct and the * hobj_ref_t type to be compared directly without introducing a * "native" hobj_ref_t datatype and I think that would break a * lot of existing programs. -QAK */ if(H5T_native_order_g == H5T_ORDER_LE) break; } /* end if */ buf_stride = buf_stride ? buf_stride : src->shared->size; switch (src->shared->size) { case 1: /*no-op*/ break; case 2: for (/*void*/; nelmts>=20; nelmts-=20) { H5_SWAP_BYTES(buf, 0, 1); /* 0 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 1 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 2 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 3 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 4 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 5 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 6 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 7 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 8 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 9 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 10 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 11 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 12 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 13 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 14 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 15 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 16 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 17 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 18 */ buf += buf_stride; H5_SWAP_BYTES(buf, 0, 1); /* 19 */ buf += buf_stride; } for (i=0; i=20; nelmts-=20) { H5_SWAP_BYTES(buf, 0, 3); /* 0 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 1 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 2 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 3 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 4 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 5 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 6 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 7 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 8 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 9 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 10 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 11 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 12 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 13 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 14 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 15 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 16 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 17 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 18 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 3); /* 19 */ H5_SWAP_BYTES(buf, 1, 2); buf += buf_stride; } for (i=0; i=10; nelmts-=10) { H5_SWAP_BYTES(buf, 0, 7); /* 0 */ H5_SWAP_BYTES(buf, 1, 6); H5_SWAP_BYTES(buf, 2, 5); H5_SWAP_BYTES(buf, 3, 4); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 7); /* 1 */ H5_SWAP_BYTES(buf, 1, 6); H5_SWAP_BYTES(buf, 2, 5); H5_SWAP_BYTES(buf, 3, 4); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 7); /* 2 */ H5_SWAP_BYTES(buf, 1, 6); H5_SWAP_BYTES(buf, 2, 5); H5_SWAP_BYTES(buf, 3, 4); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 7); /* 3 */ H5_SWAP_BYTES(buf, 1, 6); H5_SWAP_BYTES(buf, 2, 5); H5_SWAP_BYTES(buf, 3, 4); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 7); /* 4 */ H5_SWAP_BYTES(buf, 1, 6); H5_SWAP_BYTES(buf, 2, 5); H5_SWAP_BYTES(buf, 3, 4); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 7); /* 5 */ H5_SWAP_BYTES(buf, 1, 6); H5_SWAP_BYTES(buf, 2, 5); H5_SWAP_BYTES(buf, 3, 4); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 7); /* 6 */ H5_SWAP_BYTES(buf, 1, 6); H5_SWAP_BYTES(buf, 2, 5); H5_SWAP_BYTES(buf, 3, 4); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 7); /* 7 */ H5_SWAP_BYTES(buf, 1, 6); H5_SWAP_BYTES(buf, 2, 5); H5_SWAP_BYTES(buf, 3, 4); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 7); /* 8 */ H5_SWAP_BYTES(buf, 1, 6); H5_SWAP_BYTES(buf, 2, 5); H5_SWAP_BYTES(buf, 3, 4); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 7); /* 9 */ H5_SWAP_BYTES(buf, 1, 6); H5_SWAP_BYTES(buf, 2, 5); H5_SWAP_BYTES(buf, 3, 4); buf += buf_stride; } for (i=0; i=10; nelmts-=10) { H5_SWAP_BYTES(buf, 0, 15); /* 0 */ H5_SWAP_BYTES(buf, 1, 14); H5_SWAP_BYTES(buf, 2, 13); H5_SWAP_BYTES(buf, 3, 12); H5_SWAP_BYTES(buf, 4, 11); H5_SWAP_BYTES(buf, 5, 10); H5_SWAP_BYTES(buf, 6, 9); H5_SWAP_BYTES(buf, 7, 8); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 15); /* 1 */ H5_SWAP_BYTES(buf, 1, 14); H5_SWAP_BYTES(buf, 2, 13); H5_SWAP_BYTES(buf, 3, 12); H5_SWAP_BYTES(buf, 4, 11); H5_SWAP_BYTES(buf, 5, 10); H5_SWAP_BYTES(buf, 6, 9); H5_SWAP_BYTES(buf, 7, 8); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 15); /* 2 */ H5_SWAP_BYTES(buf, 1, 14); H5_SWAP_BYTES(buf, 2, 13); H5_SWAP_BYTES(buf, 3, 12); H5_SWAP_BYTES(buf, 4, 11); H5_SWAP_BYTES(buf, 5, 10); H5_SWAP_BYTES(buf, 6, 9); H5_SWAP_BYTES(buf, 7, 8); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 15); /* 3 */ H5_SWAP_BYTES(buf, 1, 14); H5_SWAP_BYTES(buf, 2, 13); H5_SWAP_BYTES(buf, 3, 12); H5_SWAP_BYTES(buf, 4, 11); H5_SWAP_BYTES(buf, 5, 10); H5_SWAP_BYTES(buf, 6, 9); H5_SWAP_BYTES(buf, 7, 8); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 15); /* 4 */ H5_SWAP_BYTES(buf, 1, 14); H5_SWAP_BYTES(buf, 2, 13); H5_SWAP_BYTES(buf, 3, 12); H5_SWAP_BYTES(buf, 4, 11); H5_SWAP_BYTES(buf, 5, 10); H5_SWAP_BYTES(buf, 6, 9); H5_SWAP_BYTES(buf, 7, 8); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 15); /* 5 */ H5_SWAP_BYTES(buf, 1, 14); H5_SWAP_BYTES(buf, 2, 13); H5_SWAP_BYTES(buf, 3, 12); H5_SWAP_BYTES(buf, 4, 11); H5_SWAP_BYTES(buf, 5, 10); H5_SWAP_BYTES(buf, 6, 9); H5_SWAP_BYTES(buf, 7, 8); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 15); /* 6 */ H5_SWAP_BYTES(buf, 1, 14); H5_SWAP_BYTES(buf, 2, 13); H5_SWAP_BYTES(buf, 3, 12); H5_SWAP_BYTES(buf, 4, 11); H5_SWAP_BYTES(buf, 5, 10); H5_SWAP_BYTES(buf, 6, 9); H5_SWAP_BYTES(buf, 7, 8); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 15); /* 7 */ H5_SWAP_BYTES(buf, 1, 14); H5_SWAP_BYTES(buf, 2, 13); H5_SWAP_BYTES(buf, 3, 12); H5_SWAP_BYTES(buf, 4, 11); H5_SWAP_BYTES(buf, 5, 10); H5_SWAP_BYTES(buf, 6, 9); H5_SWAP_BYTES(buf, 7, 8); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 15); /* 8 */ H5_SWAP_BYTES(buf, 1, 14); H5_SWAP_BYTES(buf, 2, 13); H5_SWAP_BYTES(buf, 3, 12); H5_SWAP_BYTES(buf, 4, 11); H5_SWAP_BYTES(buf, 5, 10); H5_SWAP_BYTES(buf, 6, 9); H5_SWAP_BYTES(buf, 7, 8); buf += buf_stride; H5_SWAP_BYTES(buf, 0, 15); /* 9 */ H5_SWAP_BYTES(buf, 1, 14); H5_SWAP_BYTES(buf, 2, 13); H5_SWAP_BYTES(buf, 3, 12); H5_SWAP_BYTES(buf, 4, 11); H5_SWAP_BYTES(buf, 5, 10); H5_SWAP_BYTES(buf, 6, 9); H5_SWAP_BYTES(buf, 7, 8); buf += buf_stride; } for (i=0; icommand) { case H5T_CONV_INIT: /* Capability query */ if (NULL == (src = H5I_object(src_id)) || NULL == (dst = H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); if (src->shared->size != dst->shared->size || 0 != src->shared->u.atomic.offset || 0 != dst->shared->u.atomic.offset || !((H5T_ORDER_BE == src->shared->u.atomic.order && H5T_ORDER_LE == dst->shared->u.atomic.order) || (H5T_ORDER_LE == src->shared->u.atomic.order && H5T_ORDER_BE == dst->shared->u.atomic.order))) HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "conversion not supported"); switch (src->shared->type) { case H5T_INTEGER: case H5T_BITFIELD: /* nothing to check */ break; case H5T_FLOAT: if (src->shared->u.atomic.u.f.sign != dst->shared->u.atomic.u.f.sign || src->shared->u.atomic.u.f.epos != dst->shared->u.atomic.u.f.epos || src->shared->u.atomic.u.f.esize != dst->shared->u.atomic.u.f.esize || src->shared->u.atomic.u.f.ebias != dst->shared->u.atomic.u.f.ebias || src->shared->u.atomic.u.f.mpos != dst->shared->u.atomic.u.f.mpos || src->shared->u.atomic.u.f.msize != dst->shared->u.atomic.u.f.msize || src->shared->u.atomic.u.f.norm != dst->shared->u.atomic.u.f.norm || src->shared->u.atomic.u.f.pad != dst->shared->u.atomic.u.f.pad) { HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "conversion not supported"); } break; default: HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "conversion not supported"); } cdata->need_bkg = H5T_BKG_NO; break; case H5T_CONV_CONV: /* The conversion */ if (NULL == (src = H5I_object(src_id)) || NULL == (dst = H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); buf_stride = buf_stride ? buf_stride : src->shared->size; md = src->shared->size / 2; for (i=0; ishared->size-(j+1)); } break; case H5T_CONV_FREE: /* Free private data */ break; default: HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unknown conversion command"); } done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_b_b * * Purpose: Convert from one bitfield to any other bitfield. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Thursday, May 20, 1999 * * Modifications: * Robb Matzke, 1999-06-16 * Added support for non-zero strides. If BUF_STRIDE is non-zero * then convert one value at each memory location advancing * BUF_STRIDE bytes each time; otherwise assume both source and * destination values are packed. *------------------------------------------------------------------------- */ herr_t H5T_conv_b_b(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *_buf, void UNUSED *background, hid_t dxpl_id) { uint8_t *buf = (uint8_t*)_buf; H5T_t *src=NULL, *dst=NULL; /*source and dest data types */ int direction; /*direction of traversal */ size_t elmtno; /*element number */ size_t olap; /*num overlapping elements */ size_t half_size; /*1/2 of total size for swapping*/ uint8_t *s, *sp, *d, *dp; /*source and dest traversal ptrs*/ uint8_t dbuf[256]; /*temp destination buffer */ size_t msb_pad_offset; /*offset for dest MSB padding */ size_t i; uint8_t *src_rev=NULL; /*order-reversed source buffer */ H5P_genplist_t *plist; /*property list pointer */ H5T_conv_cb_t cb_struct={NULL, NULL}; /*conversion callback structure */ H5T_conv_ret_t except_ret; /*return of callback function */ hbool_t reverse; /*if reverse the order of destination */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_b_b, FAIL); switch(cdata->command) { case H5T_CONV_INIT: /* Capability query */ if (NULL == (src = H5I_object(src_id)) || NULL == (dst = H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); if (H5T_ORDER_LE!=src->shared->u.atomic.order && H5T_ORDER_BE!=src->shared->u.atomic.order) HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unsupported byte order"); if (H5T_ORDER_LE!=dst->shared->u.atomic.order && H5T_ORDER_BE!=dst->shared->u.atomic.order) HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unsupported byte order"); cdata->need_bkg = H5T_BKG_NO; break; case H5T_CONV_FREE: break; case H5T_CONV_CONV: /* Get the data types */ if (NULL==(src=H5I_object(src_id)) || NULL==(dst=H5I_object(dst_id))) HGOTO_ERROR (H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); /* * Do we process the values from beginning to end or vice versa? Also, * how many of the elements have the source and destination areas * overlapping? */ if (src->shared->size==dst->shared->size || buf_stride) { sp = dp = (uint8_t*)buf; direction = 1; olap = nelmts; } else if (src->shared->size>=dst->shared->size) { double olap_d = HDceil((double)(dst->shared->size)/ (double)(src->shared->size-dst->shared->size)); olap = (size_t)olap_d; sp = dp = (uint8_t*)buf; direction = 1; } else { double olap_d = HDceil((double)(src->shared->size)/ (double)(dst->shared->size-src->shared->size)); olap = (size_t)olap_d; sp = (uint8_t*)buf + (nelmts-1) * src->shared->size; dp = (uint8_t*)buf + (nelmts-1) * dst->shared->size; direction = -1; } /* Get the plist structure */ if(NULL == (plist = H5P_object_verify(dxpl_id,H5P_DATASET_XFER))) HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find property list for ID"); /* Get conversion exception callback property */ if (H5P_get(plist,H5D_XFER_CONV_CB_NAME,&cb_struct)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "unable to get conversion exception callback"); /* Allocate space for order-reversed source buffer */ src_rev = (uint8_t*)H5MM_calloc(src->shared->size); /* The conversion loop */ for (elmtno=0; elmtno0) { s = sp; d = elmtno= nelmts ? dbuf : dp; } #ifndef NDEBUG /* I don't quite trust the overlap calculations yet --rpm */ if (d==dbuf) { assert ((dp>=sp && dpshared->size) || (sp>=dp && spshared->size)); } else { assert ((dpshared->size<=sp) || (spshared->size<=dp)); } #endif /* * Put the data in little endian order so our loops aren't so * complicated. We'll do all the conversion stuff assuming * little endian and then we'll fix the order at the end. */ if (H5T_ORDER_BE==src->shared->u.atomic.order) { half_size = src->shared->size/2; for (i=0; ishared->size-(i+1)]; s[src->shared->size-(i+1)] = s[i]; s[i] = tmp; } } /* Initiate these variables */ except_ret = H5T_CONV_UNHANDLED; reverse = TRUE; /* * Copy the significant part of the value. If the source is larger * than the destination then invoke the overflow function or copy * as many bits as possible. Zero extra bits in the destination. */ if (src->shared->u.atomic.prec>dst->shared->u.atomic.prec) { /*overflow*/ if(cb_struct.func) { /*If user's exception handler is present, use it*/ H5T_reverse_order(src_rev, s, src->shared->size, src->shared->u.atomic.order); /*reverse order first*/ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) { H5T_bit_copy(d, dst->shared->u.atomic.offset, s, src->shared->u.atomic.offset, dst->shared->u.atomic.prec); } else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") else if(except_ret == H5T_CONV_HANDLED) /*Don't reverse because user handles it*/ reverse = FALSE; } else { H5T_bit_copy(d, dst->shared->u.atomic.offset, s, src->shared->u.atomic.offset, src->shared->u.atomic.prec); H5T_bit_set(d, dst->shared->u.atomic.offset+src->shared->u.atomic.prec, dst->shared->u.atomic.prec-src->shared->u.atomic.prec, FALSE); } /* * Fill the destination padding areas. */ switch (dst->shared->u.atomic.lsb_pad) { case H5T_PAD_ZERO: H5T_bit_set(d, 0, dst->shared->u.atomic.offset, FALSE); break; case H5T_PAD_ONE: H5T_bit_set(d, 0, dst->shared->u.atomic.offset, TRUE); break; default: HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unsupported LSB padding"); } msb_pad_offset = dst->shared->u.atomic.offset + dst->shared->u.atomic.prec; switch (dst->shared->u.atomic.msb_pad) { case H5T_PAD_ZERO: H5T_bit_set(d, msb_pad_offset, 8*dst->shared->size-msb_pad_offset, FALSE); break; case H5T_PAD_ONE: H5T_bit_set(d, msb_pad_offset, 8*dst->shared->size-msb_pad_offset, TRUE); break; default: HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unsupported MSB padding"); } /* * Put the destination in the correct byte order. See note at * beginning of loop. */ if (H5T_ORDER_BE==dst->shared->u.atomic.order && reverse) { half_size = dst->shared->size/2; for (i=0; ishared->size-(i+1)]; d[dst->shared->size-(i+1)] = d[i]; d[i] = tmp; } } /* * If we had used a temporary buffer for the destination then we * should copy the value to the true destination buffer. */ if (d==dbuf) HDmemcpy (dp, d, dst->shared->size); if (buf_stride) { sp += direction * buf_stride; dp += direction * buf_stride; } else { sp += direction * src->shared->size; dp += direction * dst->shared->size; } } break; default: HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unknown conversion command"); } done: if(src_rev) H5MM_free(src_rev); FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_struct_init * * Purpose: Initialize the `priv' field of `cdata' with conversion * information that is relatively constant. If `priv' is * already initialized then the member conversion functions * are recalculated. * * Priv fields are indexed by source member number or * destination member number depending on whether the field * contains information about the source data type or the * destination data type (fields that contains the same * information for both source and destination are indexed by * source member number). The src2dst[] priv array maps source * member numbers to destination member numbers, but if the * source member doesn't have a corresponding destination member * then the src2dst[i]=-1. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Monday, January 26, 1998 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t H5T_conv_struct_init (H5T_t *src, H5T_t *dst, H5T_cdata_t *cdata, hid_t dxpl_id) { H5T_conv_struct_t *priv = (H5T_conv_struct_t*)(cdata->priv); int *src2dst = NULL; unsigned i, j; H5T_t *type = NULL; hid_t tid; herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5T_conv_struct_init); if (!priv) { /* * Allocate private data structure and arrays. */ if (NULL==(priv=cdata->priv=H5MM_calloc(sizeof(H5T_conv_struct_t))) || NULL==(priv->src2dst=H5MM_malloc(src->shared->u.compnd.nmembs * sizeof(int))) || NULL==(priv->src_memb_id=H5MM_malloc(src->shared->u.compnd.nmembs * sizeof(hid_t))) || NULL==(priv->dst_memb_id=H5MM_malloc(dst->shared->u.compnd.nmembs * sizeof(hid_t)))) HGOTO_ERROR (H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed"); src2dst = priv->src2dst; /* * Insure that members are sorted. */ H5T_sort_value(src, NULL); H5T_sort_value(dst, NULL); /* * Build a mapping from source member number to destination member * number. If some source member is not a destination member then that * mapping element will be negative. Also create atoms for each * source and destination member data type so we can look up the * member data type conversion functions later. */ for (i=0; ishared->u.compnd.nmembs; i++) { src2dst[i] = -1; for (j=0; jshared->u.compnd.nmembs; j++) { if (!HDstrcmp (src->shared->u.compnd.memb[i].name, dst->shared->u.compnd.memb[j].name)) { src2dst[i] = j; break; } } if (src2dst[i]>=0) { type = H5T_copy (src->shared->u.compnd.memb[i].type, H5T_COPY_ALL); tid = H5I_register (H5I_DATATYPE, type); assert (tid>=0); priv->src_memb_id[i] = tid; type = H5T_copy (dst->shared->u.compnd.memb[src2dst[i]].type, H5T_COPY_ALL); tid = H5I_register (H5I_DATATYPE, type); assert (tid>=0); priv->dst_memb_id[src2dst[i]] = tid; } } } else { /* Restore sorted conditions for the datatypes */ /* (Required for the src2dst array to be valid) */ H5T_sort_value(src, NULL); H5T_sort_value(dst, NULL); } /* end else */ /* * (Re)build the cache of member conversion functions and pointers to * their cdata entries. */ src2dst = priv->src2dst; H5MM_xfree(priv->memb_path); if (NULL==(priv->memb_path=H5MM_malloc(src->shared->u.compnd.nmembs * sizeof(H5T_path_t*)))) HGOTO_ERROR (H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed"); for (i=0; ishared->u.compnd.nmembs; i++) { if (src2dst[i]>=0) { H5T_path_t *tpath = H5T_path_find(src->shared->u.compnd.memb[i].type, dst->shared->u.compnd.memb[src2dst[i]].type, NULL, NULL, dxpl_id); if (NULL==(priv->memb_path[i] = tpath)) { H5MM_xfree(priv->src2dst); H5MM_xfree(priv->src_memb_id); H5MM_xfree(priv->dst_memb_id); H5MM_xfree(priv->memb_path); cdata->priv = priv = H5MM_xfree (priv); HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unable to convert member data type"); } } } /* Check if we need a background buffer */ if (H5T_detect_class(src,H5T_COMPOUND)==TRUE || H5T_detect_class(dst,H5T_COMPOUND)==TRUE) cdata->need_bkg = H5T_BKG_YES; cdata->recalc = FALSE; done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_struct * * Purpose: Converts between compound data types. This is a soft * conversion function. The algorithm is basically: * * For each element do * For I=1..NELMTS do * If sizeof detination type <= sizeof source type then * Convert member to destination type; * Move member as far left as possible; * * For I=NELMTS..1 do * If not destination type then * Convert member to destination type; * Move member to correct position in BKG * * Copy BKG to BUF * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Thursday, January 22, 1998 * * Modifications: * Robb Matzke, 1999-06-16 * Added support for non-zero strides. If BUF_STRIDE is * non-zero then convert one value at each memory location * advancing BUF_STRIDE bytes each time; otherwise assume * both source and destination values are packed. * * Robb Matzke, 2000-05-17 * Added the BKG_STRIDE argument to fix a design bug. If * BUF_STRIDE and BKG_STRIDE are both non-zero then each * data element converted will be placed temporarily at a * multiple of BKG_STRIDE in the BKG buffer; otherwise the * BKG buffer is assumed to be a packed array of destination * datatype. *------------------------------------------------------------------------- */ herr_t H5T_conv_struct(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t bkg_stride, void *_buf, void *_bkg, hid_t dxpl_id) { uint8_t *buf = (uint8_t *)_buf; /*cast for pointer arithmetic */ uint8_t *bkg = (uint8_t *)_bkg; /*background pointer arithmetic */ uint8_t *xbuf=buf, *xbkg=bkg; /*temp pointers into buf and bkg*/ H5T_t *src = NULL; /*source data type */ H5T_t *dst = NULL; /*destination data type */ int *src2dst = NULL; /*maps src member to dst member */ H5T_cmemb_t *src_memb = NULL; /*source struct member descript.*/ H5T_cmemb_t *dst_memb = NULL; /*destination struct memb desc. */ size_t offset; /*byte offset wrt struct */ size_t src_delta; /*source stride */ size_t elmtno; unsigned u; /*counters */ int i; /*counters */ H5T_conv_struct_t *priv = (H5T_conv_struct_t *)(cdata->priv); herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_struct, FAIL); switch (cdata->command) { case H5T_CONV_INIT: /* * First, determine if this conversion function applies to the * conversion path SRC_ID-->DST_ID. If not, return failure; * otherwise initialize the `priv' field of `cdata' with information * that remains (almost) constant for this conversion path. */ if (NULL == (src = H5I_object(src_id)) || NULL == (dst = H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); assert (H5T_COMPOUND==src->shared->type); assert (H5T_COMPOUND==dst->shared->type); if (H5T_conv_struct_init (src, dst, cdata, dxpl_id)<0) HGOTO_ERROR (H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to initialize conversion data"); break; case H5T_CONV_FREE: /* * Free the private conversion data. */ H5MM_xfree(priv->src2dst); H5MM_xfree(priv->src_memb_id); H5MM_xfree(priv->dst_memb_id); H5MM_xfree(priv->memb_path); cdata->priv = priv = H5MM_xfree (priv); break; case H5T_CONV_CONV: /* * Conversion. */ if (NULL == (src = H5I_object(src_id)) || NULL == (dst = H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); assert (priv); assert (bkg && cdata->need_bkg); if (cdata->recalc && H5T_conv_struct_init (src, dst, cdata, dxpl_id)<0) HGOTO_ERROR (H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to initialize conversion data"); /* * Insure that members are sorted. */ H5T_sort_value(src, NULL); H5T_sort_value(dst, NULL); src2dst = priv->src2dst; /* * Direction of conversion and striding through background. */ if (buf_stride) { src_delta = buf_stride; if (!bkg_stride) bkg_stride = dst->shared->size; } else if (dst->shared->size <= src->shared->size) { src_delta = src->shared->size; bkg_stride = dst->shared->size; } else { src_delta = -(int)src->shared->size; /*overflow shouldn't be possible*/ bkg_stride = -(int)dst->shared->size; /*overflow shouldn't be possible*/ xbuf += (nelmts-1) * src->shared->size; xbkg += (nelmts-1) * dst->shared->size; } /* Conversion loop... */ for (elmtno=0; elmtnoshared->u.compnd.nmembs; u++) { if (src2dst[u]<0) continue; /*subsetting*/ src_memb = src->shared->u.compnd.memb + u; dst_memb = dst->shared->u.compnd.memb + src2dst[u]; if (dst_memb->size <= src_memb->size) { if (H5T_convert(priv->memb_path[u], priv->src_memb_id[u], priv->dst_memb_id[src2dst[u]], 1, 0, 0, /*no striding (packed array)*/ xbuf+src_memb->offset, xbkg+dst_memb->offset, dxpl_id)<0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to convert compound data type member"); HDmemmove (xbuf+offset, xbuf+src_memb->offset, dst_memb->size); offset += dst_memb->size; } else { HDmemmove (xbuf+offset, xbuf+src_memb->offset, src_memb->size); offset += src_memb->size; } } /* * For each source member which will be present in the * destination, convert the member to the destination type if it * is larger than the source type (that is, has not been converted * yet). Then copy the member to the destination offset in the * background buffer. */ for (i=src->shared->u.compnd.nmembs-1; i>=0; --i) { if (src2dst[i]<0) continue; /*subsetting*/ src_memb = src->shared->u.compnd.memb + i; dst_memb = dst->shared->u.compnd.memb + src2dst[i]; if (dst_memb->size > src_memb->size) { offset -= src_memb->size; if (H5T_convert(priv->memb_path[i], priv->src_memb_id[i], priv->dst_memb_id[src2dst[i]], 1, 0, 0, /*no striding (packed array)*/ xbuf+offset, xbkg+dst_memb->offset, dxpl_id)<0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to convert compound data type member"); } else { offset -= dst_memb->size; } HDmemmove (xbkg+dst_memb->offset, xbuf+offset, dst_memb->size); } assert (0==offset); /* * Update pointers */ xbuf += src_delta; xbkg += bkg_stride; } /* If the bkg_stride was set to -(dst->shared->size), make it positive now */ if(buf_stride==0 && dst->shared->size>src->shared->size) bkg_stride=dst->shared->size; /* * Copy the background buffer back into the in-place conversion * buffer. */ for (xbuf=buf, xbkg=bkg, elmtno=0; elmtnoshared->size); xbuf += buf_stride ? buf_stride : dst->shared->size; xbkg += bkg_stride; } break; default: /* Some other command we don't know about yet.*/ HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unknown conversion command"); } done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_struct_opt * * Purpose: Converts between compound data types in a manner more * efficient than the general-purpose H5T_conv_struct() * function. This function isn't applicable if the destination * is larger than the source type. This is a soft conversion * function. The algorithm is basically: * * For each member of the struct * If sizeof detination type <= sizeof source type then * Convert member to destination type for all elements * Move memb to BKG buffer for all elements * Else * Move member as far left as possible for all elements * * For each member of the struct (in reverse order) * If not destination type then * Convert member to destination type for all elements * Move member to correct position in BKG for all elements * * Copy BKG to BUF for all elements * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Thursday, January 22, 1998 * * Modifications: * Robb Matzke, 1999-06-16 * Added support for non-zero strides. If BUF_STRIDE is * non-zero then convert one value at each memory location * advancing BUF_STRIDE bytes each time; otherwise assume both * source and destination values are packed. * * Robb Matzke, 1999-06-16 * If the source and destination data structs are the same size * then we can convert on a field-by-field basis instead of an * element by element basis. In other words, for all struct * elements being converted by this function call, first convert * all of the field1's, then all field2's, etc. This can * drastically reduce the number of calls to H5T_convert() and * thereby eliminate most of the conversion constant overhead. * * Robb Matzke, 2000-05-17 * Added the BKG_STRIDE argument to fix a design bug. If * BUF_STRIDE and BKG_STRIDE are both non-zero then each * data element converted will be placed temporarily at a * multiple of BKG_STRIDE in the BKG buffer; otherwise the * BKG buffer is assumed to be a packed array of destination * datatype. *------------------------------------------------------------------------- */ herr_t H5T_conv_struct_opt(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t bkg_stride, void *_buf, void *_bkg, hid_t dxpl_id) { uint8_t *buf = (uint8_t *)_buf; /*cast for pointer arithmetic */ uint8_t *bkg = (uint8_t *)_bkg; /*background pointer arithmetic */ uint8_t *xbuf = NULL; /*temporary pointer into `buf' */ uint8_t *xbkg = NULL; /*temporary pointer into `bkg' */ H5T_t *src = NULL; /*source data type */ H5T_t *dst = NULL; /*destination data type */ int *src2dst = NULL; /*maps src member to dst member */ H5T_cmemb_t *src_memb = NULL; /*source struct member descript.*/ H5T_cmemb_t *dst_memb = NULL; /*destination struct memb desc. */ size_t offset; /*byte offset wrt struct */ size_t elmtno; /*element counter */ unsigned u; /*counters */ int i; /*counters */ H5T_conv_struct_t *priv = NULL; /*private data */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_struct_opt, FAIL); switch (cdata->command) { case H5T_CONV_INIT: /* * First, determine if this conversion function applies to the * conversion path SRC_ID-->DST_ID. If not, return failure; * otherwise initialize the `priv' field of `cdata' with information * that remains (almost) constant for this conversion path. */ if (NULL == (src = H5I_object(src_id)) || NULL == (dst = H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); assert (H5T_COMPOUND==src->shared->type); assert (H5T_COMPOUND==dst->shared->type); /* Initialize data which is relatively constant */ if (H5T_conv_struct_init (src, dst, cdata, dxpl_id)<0) HGOTO_ERROR (H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to initialize conversion data"); priv = (H5T_conv_struct_t *)(cdata->priv); src2dst = priv->src2dst; /* * If the destination type is not larger than the source type then * this conversion function is guaranteed to work (provided all * members can be converted also). Otherwise the determination is * quite a bit more complicated. Essentially we have to make sure * that there is always room in the source buffer to do the * conversion of a member in place. This is basically the same pair * of loops as in the actual conversion except it checks that there * is room for each conversion instead of actually doing anything. */ if (dst->shared->size > src->shared->size) { for (u=0, offset=0; ushared->u.compnd.nmembs; u++) { if (src2dst[u]<0) continue; src_memb = src->shared->u.compnd.memb + u; dst_memb = dst->shared->u.compnd.memb + src2dst[u]; if (dst_memb->size > src_memb->size) offset += src_memb->size; } for (i=src->shared->u.compnd.nmembs-1; i>=0; --i) { if (src2dst[i]<0) continue; src_memb = src->shared->u.compnd.memb + i; dst_memb = dst->shared->u.compnd.memb + src2dst[i]; if (dst_memb->size > src_memb->size) { offset -= src_memb->size; if (dst_memb->size > src->shared->size-offset) { H5MM_xfree(priv->src2dst); H5MM_xfree(priv->src_memb_id); H5MM_xfree(priv->dst_memb_id); H5MM_xfree(priv->memb_path); cdata->priv = priv = H5MM_xfree (priv); HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "convertion is unsupported by this function"); } } } } break; case H5T_CONV_FREE: /* * Free the private conversion data. */ priv = (H5T_conv_struct_t *)(cdata->priv); H5MM_xfree(priv->src2dst); H5MM_xfree(priv->src_memb_id); H5MM_xfree(priv->dst_memb_id); H5MM_xfree(priv->memb_path); cdata->priv = priv = H5MM_xfree (priv); break; case H5T_CONV_CONV: /* * Conversion. */ if (NULL == (src = H5I_object(src_id)) || NULL == (dst = H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); /* Update cached data if necessary */ if (cdata->recalc && H5T_conv_struct_init (src, dst, cdata, dxpl_id)<0) HGOTO_ERROR (H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to initialize conversion data"); priv = (H5T_conv_struct_t *)(cdata->priv); src2dst = priv->src2dst; assert(priv); assert(bkg && cdata->need_bkg); /* * Insure that members are sorted. */ H5T_sort_value(src, NULL); H5T_sort_value(dst, NULL); /* * Calculate strides. If BUF_STRIDE is non-zero then convert one * data element at every BUF_STRIDE bytes through the main buffer * (BUF), leaving the result of each conversion at the same * location; otherwise assume the source and destination data are * packed tightly based on src->shared->size and dst->shared->size. Also, if * BUF_STRIDE and BKG_STRIDE are both non-zero then place * background data into the BKG buffer at multiples of BKG_STRIDE; * otherwise assume BKG buffer is the packed destination datatype. */ if (!buf_stride || !bkg_stride) bkg_stride = dst->shared->size; /* * For each member where the destination is not larger than the * source, stride through all the elements converting only that member * in each element and then copying the element to its final * destination in the bkg buffer. Otherwise move the element as far * left as possible in the buffer. */ for (u=0, offset=0; ushared->u.compnd.nmembs; u++) { if (src2dst[u]<0) continue; /*subsetting*/ src_memb = src->shared->u.compnd.memb + u; dst_memb = dst->shared->u.compnd.memb + src2dst[u]; if (dst_memb->size <= src_memb->size) { xbuf = buf + src_memb->offset; xbkg = bkg + dst_memb->offset; if (H5T_convert(priv->memb_path[u], priv->src_memb_id[u], priv->dst_memb_id[src2dst[u]], nelmts, buf_stride ? buf_stride : src->shared->size, bkg_stride, xbuf, xbkg, dxpl_id)<0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to convert compound data type member"); for (elmtno=0; elmtnosize); xbuf += buf_stride ? buf_stride : src->shared->size; xbkg += bkg_stride; } } else { for (xbuf=buf, elmtno=0; elmtnooffset, src_memb->size); xbuf += buf_stride ? buf_stride : src->shared->size; } offset += src_memb->size; } } /* * Work from right to left, converting those members that weren't * converted in the previous loop (those members where the destination * is larger than the source) and them to their final position in the * bkg buffer. */ for (i=src->shared->u.compnd.nmembs-1; i>=0; --i) { if (src2dst[i]<0) continue; src_memb = src->shared->u.compnd.memb + i; dst_memb = dst->shared->u.compnd.memb + src2dst[i]; if (dst_memb->size > src_memb->size) { offset -= src_memb->size; xbuf = buf + offset; xbkg = bkg + dst_memb->offset; if (H5T_convert(priv->memb_path[i], priv->src_memb_id[i], priv->dst_memb_id[src2dst[i]], nelmts, buf_stride ? buf_stride : src->shared->size, bkg_stride, xbuf, xbkg, dxpl_id)<0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to convert compound data type member"); for (elmtno=0; elmtnosize); xbuf += buf_stride ? buf_stride : src->shared->size; xbkg += bkg_stride; } } } /* Move background buffer into result buffer */ for (xbuf=buf, xbkg=bkg, elmtno=0; elmtnoshared->size); xbuf += buf_stride ? buf_stride : dst->shared->size; xbkg += bkg_stride; } break; default: /* Some other command we don't know about yet.*/ HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unknown conversion command"); } done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_enum_init * * Purpose: Initialize information for H5T_conv_enum(). * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Monday, January 4, 1999 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t H5T_conv_enum_init(H5T_t *src, H5T_t *dst, H5T_cdata_t *cdata) { H5T_enum_struct_t *priv=NULL; /*private conversion data */ int n; /*src value cast as native int */ int domain[2]; /*min and max source values */ int *map=NULL; /*map from src value to dst idx */ unsigned length; /*nelmts in map array */ unsigned i, j; /*counters */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI_NOINIT(H5T_conv_enum_init); cdata->need_bkg = H5T_BKG_NO; if (NULL==(priv=cdata->priv=H5MM_calloc(sizeof(*priv)))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed"); if (0==src->shared->u.enumer.nmembs) HGOTO_DONE(SUCCEED); /* * Check that the source symbol names are a subset of the destination * symbol names and build a map from source member index to destination * member index. */ H5T_sort_name(src, NULL); H5T_sort_name(dst, NULL); if (NULL==(priv->src2dst=H5MM_malloc(src->shared->u.enumer.nmembs*sizeof(int)))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed");; for (i=0, j=0; ishared->u.enumer.nmembs && jshared->u.enumer.nmembs; i++, j++) { while (jshared->u.enumer.nmembs && HDstrcmp(src->shared->u.enumer.name[i], dst->shared->u.enumer.name[j])) j++; if (j>=dst->shared->u.enumer.nmembs) HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "source type is not a subset of destination type"); priv->src2dst[i] = j; } /* * The conversion function will use an O(log N) lookup method for each * value converted. However, if all of the following constraints are met * then we can build a perfect hash table and use an O(1) lookup method. * * A: The source data type size matches one of our native data type * sizes. * * B: After casting the source value bit pattern to a native type * the size of the range of values is less than 20% larger than * the number of values. * * If this special case is met then we use the source bit pattern cast as * a native integer type as an index into the `val2dst'. The values of * that array are the index numbers in the destination type or negative * if the entry is unused. */ if (1==src->shared->size || sizeof(short)==src->shared->size || sizeof(int)==src->shared->size) { for (i=0; ishared->u.enumer.nmembs; i++) { if (1==src->shared->size) { n = *((signed char*)(src->shared->u.enumer.value+i)); } else if (sizeof(short)==src->shared->size) { n = *((short*)(src->shared->u.enumer.value+i*src->shared->size)); } else { n = *((int*)(src->shared->u.enumer.value+i*src->shared->size)); } if (0==i) { domain[0] = domain[1] = n; } else { domain[0] = MIN(domain[0], n); domain[1] = MAX(domain[1], n); } } length = (domain[1]-domain[0])+1; if (src->shared->u.enumer.nmembs<2 || (double)length/src->shared->u.enumer.nmembs<1.2) { priv->base = domain[0]; priv->length = length; if (NULL==(map=H5MM_malloc(length*sizeof(int)))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed"); for (i=0; ishared->u.enumer.nmembs; i++) { if (1==src->shared->size) { n = *((signed char*)(src->shared->u.enumer.value+i)); } else if (sizeof(short)==src->shared->size) { n = *((short*)(src->shared->u.enumer.value+i*src->shared->size)); } else { n = *((int*)(src->shared->u.enumer.value+i*src->shared->size)); } n -= priv->base; assert(n>=0 && nlength); assert(map[n]<0); map[n] = priv->src2dst[i]; } /* * Replace original src2dst array with our new one. The original * was indexed by source member number while the new one is * indexed by source values. */ H5MM_xfree(priv->src2dst); priv->src2dst = map; HGOTO_DONE(SUCCEED); } } /* Sort source type by value and adjust src2dst[] appropriately */ H5T_sort_value(src, priv->src2dst); done: if (ret_value<0 && priv) { H5MM_xfree(priv->src2dst); H5MM_xfree(priv); cdata->priv = NULL; } FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_enum * * Purpose: Converts one type of enumerated data to another. * * Return: Success: Non-negative * * Failure: negative * * Programmer: Robb Matzke * Monday, January 4, 1999 * * Modifications: * Robb Matzke, 1999-06-16 * Added support for non-zero strides. If BUF_STRIDE is non-zero * then convert one value at each memory location advancing * BUF_STRIDE bytes each time; otherwise assume both source and * destination values are packed. *------------------------------------------------------------------------- */ herr_t H5T_conv_enum(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *_buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { uint8_t *buf = (uint8_t*)_buf; /*cast for pointer arithmetic */ H5T_t *src=NULL, *dst=NULL; /*src and dst data types */ uint8_t *s=NULL, *d=NULL; /*src and dst BUF pointers */ int src_delta, dst_delta; /*conversion strides */ int n; /*src value cast as native int */ size_t i; /*counters */ H5T_enum_struct_t *priv = (H5T_enum_struct_t*)(cdata->priv); H5P_genplist_t *plist; /*property list pointer */ H5T_conv_cb_t cb_struct; /*conversion callback structure */ H5T_conv_ret_t except_ret; /*return of callback function */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_enum, FAIL); switch (cdata->command) { case H5T_CONV_INIT: /* * Determine if this conversion function applies to the conversion * path SRC_ID->DST_ID. If not return failure; otherwise initialize * the `priv' field of `cdata' with information about the underlying * integer conversion. */ if (NULL == (src = H5I_object(src_id)) || NULL == (dst = H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); assert (H5T_ENUM==src->shared->type); assert (H5T_ENUM==dst->shared->type); if (H5T_conv_enum_init(src, dst, cdata)<0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "unable to initialize private data"); break; case H5T_CONV_FREE: #ifdef H5T_DEBUG if (H5DEBUG(T)) { fprintf(H5DEBUG(T), " Using %s mapping function%s\n", priv->length?"O(1)":"O(log N)", priv->length?"":", where N is the number of enum members"); } #endif if (priv) { H5MM_xfree(priv->src2dst); H5MM_xfree(priv); } cdata->priv = NULL; break; case H5T_CONV_CONV: if (NULL == (src = H5I_object(src_id)) || NULL == (dst = H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); assert (H5T_ENUM==src->shared->type); assert (H5T_ENUM==dst->shared->type); /* priv->src2dst map was computed for certain sort keys. Make sure those same * sort keys are used here during conversion. See H5T_conv_enum_init(). But * we actually don't care about the source type's order when doing the O(1) * conversion algorithm, which is turned on by non-zero priv->length */ H5T_sort_name(dst, NULL); if (!priv->length) H5T_sort_value(src, NULL); /* * Direction of conversion. */ if (buf_stride) { src_delta = dst_delta = (int)buf_stride; s = d = buf; } else if (dst->shared->size <= src->shared->size) { src_delta = (int)src->shared->size; /*overflow shouldn't be possible*/ dst_delta = (int)dst->shared->size; /*overflow shouldn't be possible*/ s = d = buf; } else { src_delta = -(int)src->shared->size; /*overflow shouldn't be possible*/ dst_delta = -(int)dst->shared->size; /*overflow shouldn't be possible*/ s = buf + (nelmts-1) * src->shared->size; d = buf + (nelmts-1) * dst->shared->size; } /* Get the plist structure */ if(NULL == (plist = H5P_object_verify(dxpl_id,H5P_DATASET_XFER))) HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find property list for ID"); /* Get conversion exception callback property */ if (H5P_get(plist,H5D_XFER_CONV_CB_NAME,&cb_struct)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "unable to get conversion exception callback"); for (i=0; ilength) { /* Use O(1) lookup */ if (1==src->shared->size) { n = *((signed char*)s); } else if (sizeof(short)==src->shared->size) { n = *((short*)s); } else { n = *((int*)s); } n -= priv->base; if (n<0 || n>=priv->length || priv->src2dst[n]<0) { /*overflow*/ except_ret = H5T_CONV_UNHANDLED; if(cb_struct.func) { /*If user's exception handler is present, use it*/ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, src_id, dst_id, s, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) { HDmemset(d, 0xff, dst->shared->size); } else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") } else { HDmemcpy(d, dst->shared->u.enumer.value+priv->src2dst[n]*dst->shared->size, dst->shared->size); } } else { /* Use O(log N) lookup */ int lt = 0; int rt = src->shared->u.enumer.nmembs; int md, cmp; while (ltshared->u.enumer.value+md*src->shared->size, src->shared->size); if (cmp<0) { rt = md; } else if (cmp>0) { lt = md+1; } else { break; } } if (lt>=rt) { except_ret = H5T_CONV_UNHANDLED; if(cb_struct.func) { /*If user's exception handler is present, use it*/ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, src_id, dst_id, src, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) { HDmemset(d, 0xff, dst->shared->size); } else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") } else { HDmemcpy(d, dst->shared->u.enumer.value+priv->src2dst[md]*dst->shared->size, dst->shared->size); } } } break; default: /* Some other command we don't know about yet.*/ HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unknown conversion command"); } done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_vlen * * Purpose: Converts between VL data types in memory and on disk. * This is a soft conversion function. The algorithm is * basically: * * For every VL struct in the main buffer: * 1. Allocate space for temporary dst VL data (reuse buffer * if possible) * 2. Copy VL data from src buffer into dst buffer * 3. Convert VL data into dst representation * 4. Allocate buffer in dst heap * 5. Free heap objects storing old data * 6. Write dst VL data into dst heap * 7. Store (heap ID or pointer) and length in main dst buffer * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Wednesday, May 26, 1999 * * Modifications: * * Quincey Koziol, 2 July, 1999 * Enabled support for non-zero strides. If BUF_STRIDE is non-zero * then convert one value at each memory location advancing * BUF_STRIDE bytes each time; otherwise assume both source and * destination values are packed. * * Raymond Lu, 26 June, 2002 * Background buffer is used for freeing heap objects storing * old data. At this moment, it only frees the first level of * VL datatype. It doesn't handle nested VL datatypes. * *------------------------------------------------------------------------- */ herr_t H5T_conv_vlen(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t bkg_stride, void *buf, void *bkg, hid_t dxpl_id) { H5T_vlen_alloc_info_t _vl_alloc_info; /* VL allocation info buffer */ H5T_vlen_alloc_info_t *vl_alloc_info=&_vl_alloc_info; /* VL allocation info */ H5T_path_t *tpath; /* Type conversion path */ hbool_t noop_conv=FALSE; /* Flag to indicate a noop conversion */ hbool_t write_to_file=FALSE; /* Flag to indicate writing to file */ hbool_t parent_is_vlen; /* Flag to indicate parent is vlen datatyp */ hid_t tsrc_id = -1, tdst_id = -1;/*temporary type atoms */ H5T_t *src = NULL; /*source data type */ H5T_t *dst = NULL; /*destination data type */ H5HG_t bg_hobjid, parent_hobjid; uint8_t *s; /*source buffer */ uint8_t *d; /*destination buffer */ uint8_t *b; /*background buffer */ ssize_t s_stride, d_stride; /*src and dst strides */ ssize_t b_stride; /*bkg stride */ size_t safe; /*how many elements are safe to process in each pass */ ssize_t seq_len; /*the number of elements in the current sequence*/ size_t bg_seq_len=0; size_t src_base_size, dst_base_size;/*source & destination base size*/ void *conv_buf=NULL; /*temporary conversion buffer */ size_t conv_buf_size=0; /*size of conversion buffer in bytes */ void *tmp_buf=NULL; /*temporary background buffer */ size_t tmp_buf_size=0; /*size of temporary bkg buffer */ hbool_t nested=FALSE; /*flag of nested VL case */ size_t elmtno; /*element number counter */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_vlen, FAIL); switch (cdata->command) { case H5T_CONV_INIT: /* * First, determine if this conversion function applies to the * conversion path SRC_ID-->DST_ID. If not, return failure; * otherwise initialize the `priv' field of `cdata' with * information that remains (almost) constant for this * conversion path. */ if (NULL == (src = H5I_object(src_id)) || NULL == (dst = H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); assert (H5T_VLEN==src->shared->type); assert (H5T_VLEN==dst->shared->type); /* Variable-length types don't need a background buffer */ cdata->need_bkg = H5T_BKG_NO; break; case H5T_CONV_FREE: /* QAK - Nothing to do currently */ break; case H5T_CONV_CONV: /* * Conversion. */ if (NULL == (src = H5I_object(src_id)) || NULL == (dst = H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); /* Initialize source & destination strides */ if (buf_stride) { assert(buf_stride>=src->shared->size); assert(buf_stride>=dst->shared->size); H5_CHECK_OVERFLOW(buf_stride,size_t,ssize_t); s_stride = d_stride = (ssize_t)buf_stride; } else { H5_CHECK_OVERFLOW(src->shared->size,size_t,ssize_t); H5_CHECK_OVERFLOW(dst->shared->size,size_t,ssize_t); s_stride = (ssize_t)src->shared->size; d_stride = (ssize_t)dst->shared->size; } if(bkg) { if(bkg_stride) { H5_CHECK_OVERFLOW(bkg_stride,size_t,ssize_t); b_stride=(ssize_t)bkg_stride; } /* end if */ else b_stride=d_stride; } /* end if */ else b_stride=0; /* Get the size of the base types in src & dst */ src_base_size=H5T_get_size(src->shared->parent); dst_base_size=H5T_get_size(dst->shared->parent); /* Set up conversion path for base elements */ if (NULL==(tpath=H5T_path_find(src->shared->parent, dst->shared->parent, NULL, NULL, dxpl_id))) { HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unable to convert between src and dest datatypes"); } else if (!H5T_path_noop(tpath)) { if ((tsrc_id = H5I_register(H5I_DATATYPE, H5T_copy(src->shared->parent, H5T_COPY_ALL)))<0 || (tdst_id = H5I_register(H5I_DATATYPE, H5T_copy(dst->shared->parent, H5T_COPY_ALL)))<0) HGOTO_ERROR(H5E_DATASET, H5E_CANTREGISTER, FAIL, "unable to register types for conversion"); } else noop_conv=TRUE; /* Check if we need a temporary buffer for this conversion */ parent_is_vlen=H5T_detect_class(dst->shared->parent,H5T_VLEN); if(tpath->cdata.need_bkg || parent_is_vlen) { /* Set up initial background buffer */ tmp_buf_size=MAX(src_base_size,dst_base_size); if ((tmp_buf=H5FL_BLK_MALLOC(vlen_seq,tmp_buf_size))==NULL) HGOTO_ERROR (H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for type conversion"); } /* end if */ /* Get the allocation info */ if(H5T_vlen_get_alloc_info(dxpl_id,&vl_alloc_info)<0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTGET, FAIL, "unable to retrieve VL allocation info"); /* Set flags to indicate we are writing to or reading from the file */ if(dst->shared->u.vlen.f!=NULL) write_to_file=TRUE; /* Set the flag for nested VL case */ if(write_to_file && parent_is_vlen && bkg!=NULL) nested=1; /* The outer loop of the type conversion macro, controlling which */ /* direction the buffer is walked */ while (nelmts>0) { /* Check if we need to go backwards through the buffer */ if(d_stride>s_stride) { /* Compute the number of "safe" destination elements at */ /* the end of the buffer (Those which don't overlap with */ /* any source elements at the beginning of the buffer) */ safe=nelmts-(((nelmts*s_stride)+(d_stride-1))/d_stride); /* If we're down to the last few elements, just wrap up */ /* with a "real" reverse copy */ if(safe<2) { s = (uint8_t*)buf+(nelmts-1)*s_stride; d = (uint8_t*)buf+(nelmts-1)*d_stride; b = (uint8_t*)bkg+(nelmts-1)*b_stride; s_stride = -s_stride; d_stride = -d_stride; b_stride = -b_stride; safe=nelmts; } /* end if */ else { s = (uint8_t*)buf+(nelmts-safe)*s_stride; d = (uint8_t*)buf+(nelmts-safe)*d_stride; b = (uint8_t*)bkg+(nelmts-safe)*b_stride; } /* end else */ } /* end if */ else { /* Single forward pass over all data */ s = d = buf; b = bkg; safe=nelmts; } /* end else */ for (elmtno=0; elmtnoshared->u.vlen.isnull))(src->shared->u.vlen.f,s)) { /* Write "nil" sequence to destination location */ if((*(dst->shared->u.vlen.setnull))(dst->shared->u.vlen.f,dxpl_id,d,b)<0) HGOTO_ERROR(H5E_DATATYPE, H5E_WRITEERROR, FAIL, "can't set VL data to 'nil'"); } /* end if */ else { /* Get length of element sequences */ if((seq_len=(*(src->shared->u.vlen.getlen))(s))<0) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "incorrect length"); /* If we are reading from memory and there is no conversion, just get the pointer to sequence */ if(write_to_file && noop_conv) { /* Get direct pointer to sequence */ if((conv_buf=(*(src->shared->u.vlen.getptr))(s))==NULL) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "invalid source pointer"); } /* end if */ else { size_t src_size, dst_size; /*source & destination total size in bytes*/ src_size=seq_len*src_base_size; dst_size=seq_len*dst_base_size; /* Check if conversion buffer is large enough, resize if * necessary */ if(conv_buf_sizeshared->u.vlen.read))(src->shared->u.vlen.f,dxpl_id,s,conv_buf,src_size)<0) HGOTO_ERROR(H5E_DATATYPE, H5E_READERROR, FAIL, "can't read VL data"); } /* end else */ if(!noop_conv) { /* Check if temporary buffer is large enough, resize if necessary */ /* (Chain off the conversion buffer size) */ if(tmp_buf && tmp_buf_size0) { if(tmp_buf_size<(bg_seq_len*MAX(src_base_size, dst_base_size))) { tmp_buf_size=(bg_seq_len*MAX(src_base_size, dst_base_size)); if((tmp_buf=H5FL_BLK_REALLOC(vlen_seq,tmp_buf, tmp_buf_size))==NULL) HGOTO_ERROR (H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for type conversion"); } H5F_addr_decode(dst->shared->u.vlen.f, (const uint8_t **)&tmp, &(bg_hobjid.addr)); INT32DECODE(tmp, bg_hobjid.idx); if(H5HG_read(dst->shared->u.vlen.f,dxpl_id,&bg_hobjid,tmp_buf)==NULL) HGOTO_ERROR (H5E_DATATYPE, H5E_READERROR, FAIL, "can't read VL sequence into background buffer"); } /* end if */ /* If the sequence gets shorter, pad out the original sequence with zeros */ H5_CHECK_OVERFLOW(bg_seq_len,size_t,ssize_t); if((ssize_t)bg_seq_lenshared->u.vlen.write))(dst->shared->u.vlen.f,dxpl_id,vl_alloc_info,d,conv_buf, b, (size_t)seq_len, dst_base_size)<0) HGOTO_ERROR(H5E_DATATYPE, H5E_WRITEERROR, FAIL, "can't write VL data"); if(!noop_conv) { /* For nested VL case, free leftover heap objects from the deeper level if the length of new data elements is shorter than the old data elements.*/ H5_CHECK_OVERFLOW(bg_seq_len,size_t,ssize_t); if(nested && seq_len<(ssize_t)bg_seq_len) { size_t parent_seq_len; size_t u; uint8_t *tmp_p=tmp_buf; tmp_p += seq_len*dst_base_size; for(u=0; u<(bg_seq_len-seq_len); u++) { UINT32DECODE(tmp_p, parent_seq_len); if(parent_seq_len>0) { H5F_addr_decode(dst->shared->u.vlen.f, (const uint8_t **)&tmp_p, &(parent_hobjid.addr)); INT32DECODE(tmp_p, parent_hobjid.idx); if(H5HG_remove(dst->shared->u.vlen.f, dxpl_id,&parent_hobjid)<0) HGOTO_ERROR(H5E_DATATYPE, H5E_WRITEERROR, FAIL, "Unable to remove heap object"); } } } /* end if */ } /* end if */ } /* end else */ /* Advance pointers */ s += s_stride; d += d_stride; b += b_stride; } /* end for */ /* Decrement number of elements left to convert */ nelmts-=safe; } /* end while */ /* Release the temporary datatype IDs used */ if (tsrc_id >= 0) H5I_dec_ref(tsrc_id); if (tdst_id >= 0) H5I_dec_ref(tdst_id); break; default: /* Some other command we don't know about yet.*/ HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unknown conversion command"); } /* end switch */ done: /* If the conversion buffer doesn't need to be freed, reset its pointer */ if(write_to_file && noop_conv) conv_buf=NULL; /* Release the conversion buffer (always allocated, except on errors) */ if(conv_buf!=NULL) H5FL_BLK_FREE(vlen_seq,conv_buf); /* Release the background buffer, if we have one */ if(tmp_buf!=NULL) H5FL_BLK_FREE(vlen_seq,tmp_buf); FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_array * * Purpose: Converts between array data types in memory and on disk. * This is a soft conversion function. * * Return: Non-negative on success/Negative on failure * * Programmer: Quincey Koziol * Monday, November 6, 2000 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_array(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t bkg_stride, void *_buf, void UNUSED *_bkg, hid_t dxpl_id) { H5T_path_t *tpath; /* Type conversion path */ hid_t tsrc_id = -1, tdst_id = -1;/*temporary type atoms */ H5T_t *src = NULL; /*source data type */ H5T_t *dst = NULL; /*destination data type */ uint8_t *sp, *dp; /*source and dest traversal ptrs */ size_t src_delta, dst_delta; /*source & destination stride */ int direction; /*direction of traversal */ size_t elmtno; /*element number counter */ int i; /* local index variable */ void *bkg_buf=NULL; /*temporary background buffer */ size_t bkg_buf_size=0; /*size of background buffer in bytes */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_array, FAIL); switch (cdata->command) { case H5T_CONV_INIT: /* * First, determine if this conversion function applies to the * conversion path SRC_ID-->DST_ID. If not, return failure; * otherwise initialize the `priv' field of `cdata' with * information that remains (almost) constant for this * conversion path. */ if (NULL == (src = H5I_object(src_id)) || NULL == (dst = H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); assert (H5T_ARRAY==src->shared->type); assert (H5T_ARRAY==dst->shared->type); /* Check the number and sizes of the dimensions */ if(src->shared->u.array.ndims!=dst->shared->u.array.ndims) HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "array datatypes do not have the same number of dimensions"); for(i=0; ishared->u.array.ndims; i++) if(src->shared->u.array.dim[i]!=dst->shared->u.array.dim[i]) HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "array datatypes do not have the same sizes of dimensions"); #ifdef LATER for(i=0; ishared->u.array.ndims; i++) if(src->shared->u.array.perm[i]!=dst->shared->u.array.perm[i]) HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "array datatypes do not have the same dimension permutations"); #endif /* LATER */ /* Array datatypes don't need a background buffer */ cdata->need_bkg = H5T_BKG_NO; break; case H5T_CONV_FREE: /* QAK - Nothing to do currently */ break; case H5T_CONV_CONV: /* * Conversion. */ if (NULL == (src = H5I_object(src_id)) || NULL == (dst = H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); /* * Do we process the values from beginning to end or vice * versa? Also, how many of the elements have the source and * destination areas overlapping? */ if (src->shared->size>=dst->shared->size || buf_stride>0) { sp = dp = (uint8_t*)_buf; direction = 1; } else { sp = (uint8_t*)_buf + (nelmts-1) * (buf_stride ? buf_stride : src->shared->size); dp = (uint8_t*)_buf + (nelmts-1) * (buf_stride ? buf_stride : dst->shared->size); direction = -1; } /* * Direction & size of buffer traversal. */ src_delta = direction * (buf_stride ? buf_stride : src->shared->size); dst_delta = direction * (buf_stride ? buf_stride : dst->shared->size); /* Set up conversion path for base elements */ if (NULL==(tpath=H5T_path_find(src->shared->parent, dst->shared->parent, NULL, NULL, dxpl_id))) { HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unable to convert between src and dest datatypes"); } else if (!H5T_path_noop(tpath)) { if ((tsrc_id = H5I_register(H5I_DATATYPE, H5T_copy(src->shared->parent, H5T_COPY_ALL)))<0 || (tdst_id = H5I_register(H5I_DATATYPE, H5T_copy(dst->shared->parent, H5T_COPY_ALL)))<0) HGOTO_ERROR(H5E_DATASET, H5E_CANTREGISTER, FAIL, "unable to register types for conversion"); } /* Check if we need a background buffer for this conversion */ if(tpath->cdata.need_bkg) { /* Allocate background buffer */ bkg_buf_size=src->shared->u.array.nelem*MAX(src->shared->size,dst->shared->size); if ((bkg_buf=H5FL_BLK_CALLOC(array_seq,bkg_buf_size))==NULL) HGOTO_ERROR (H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for type conversion"); } /* end if */ /* Perform the actual conversion */ for (elmtno=0; elmtnoshared->size); /* Convert array */ if (H5T_convert(tpath, tsrc_id, tdst_id, src->shared->u.array.nelem, 0, bkg_stride, dp, bkg_buf, dxpl_id)<0) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, FAIL, "datatype conversion failed"); /* Advance the source & destination pointers */ sp += src_delta; dp += dst_delta; } /* Release the background buffer, if we have one */ if(bkg_buf!=NULL) H5FL_BLK_FREE(array_seq,bkg_buf); /* Release the temporary datatype IDs used */ if (tsrc_id >= 0) H5I_dec_ref(tsrc_id); if (tdst_id >= 0) H5I_dec_ref(tdst_id); break; default: /* Some other command we don't know about yet.*/ HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unknown conversion command"); } /* end switch */ done: FUNC_LEAVE_NOAPI(ret_value); } /* end H5T_conv_array() */ /*------------------------------------------------------------------------- * Function: H5T_conv_i_i * * Purpose: Convert one integer type to another. This is the catch-all * function for integer conversions and is probably not * particularly fast. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Wednesday, June 10, 1998 * * Modifications: * Robb Matzke, 7 Jul 1998 * Added overflow handling. * * Robb Matzke, 1999-06-16 * Added support for non-zero strides. If BUF_STRIDE is non-zero * then convert one value at each memory location advancing * BUF_STRIDE bytes each time; otherwise assume both source and * destination values are packed. * * Raymond Lu * Wednesday, April 21, 2004 * There is a new design for exception handling like overflow, * which is passed in as a transfer property. *------------------------------------------------------------------------- */ herr_t H5T_conv_i_i (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t dxpl_id) { H5T_t *src = NULL; /*source data type */ H5T_t *dst = NULL; /*destination data type */ int direction; /*direction of traversal */ size_t elmtno; /*element number */ size_t half_size; /*half the type size */ size_t olap; /*num overlapping elements */ uint8_t *s, *sp, *d, *dp; /*source and dest traversal ptrs*/ uint8_t *src_rev=NULL; /*order-reversed source buffer */ uint8_t dbuf[64]; /*temp destination buffer */ size_t first; ssize_t sfirst; /*a signed version of `first' */ size_t i; /*Local index variables */ H5P_genplist_t *plist; /*property list pointer */ H5T_conv_cb_t cb_struct={NULL, NULL}; /*conversion callback structure */ H5T_conv_ret_t except_ret; /*return of callback function */ hbool_t reverse; /*if reverse the order of destination */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_i_i, FAIL); switch (cdata->command) { case H5T_CONV_INIT: if (NULL==(src=H5I_object(src_id)) || NULL==(dst=H5I_object(dst_id))) HGOTO_ERROR (H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); if (H5T_ORDER_LE!=src->shared->u.atomic.order && H5T_ORDER_BE!=src->shared->u.atomic.order) HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unsupported byte order"); if (H5T_ORDER_LE!=dst->shared->u.atomic.order && H5T_ORDER_BE!=dst->shared->u.atomic.order) HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unsupported byte order"); if (dst->shared->size>sizeof dbuf) HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "destination size is too large"); cdata->need_bkg = H5T_BKG_NO; break; case H5T_CONV_FREE: break; case H5T_CONV_CONV: /* Get the data types */ if (NULL==(src=H5I_object(src_id)) || NULL==(dst=H5I_object(dst_id))) HGOTO_ERROR (H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); /* * Do we process the values from beginning to end or vice versa? Also, * how many of the elements have the source and destination areas * overlapping? */ if (src->shared->size==dst->shared->size || buf_stride) { sp = dp = (uint8_t*)buf; direction = 1; olap = nelmts; } else if (src->shared->size>=dst->shared->size) { double olap_d = HDceil((double)(dst->shared->size)/ (double)(src->shared->size-dst->shared->size)); olap = (size_t)olap_d; sp = dp = (uint8_t*)buf; direction = 1; } else { double olap_d = HDceil((double)(src->shared->size)/ (double)(dst->shared->size-src->shared->size)); olap = (size_t)olap_d; sp = (uint8_t*)buf + (nelmts-1) * src->shared->size; dp = (uint8_t*)buf + (nelmts-1) * dst->shared->size; direction = -1; } /* Get the plist structure */ if(NULL == (plist = H5P_object_verify(dxpl_id,H5P_DATASET_XFER))) HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find property list for ID"); /* Get conversion exception callback property */ if (H5P_get(plist,H5D_XFER_CONV_CB_NAME,&cb_struct)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "unable to get conversion exception callback"); /* Allocate space for order-reversed source buffer */ src_rev = (uint8_t*)H5MM_calloc(src->shared->size); /* The conversion loop */ for (elmtno=0; elmtno0) { s = sp; d = elmtno= nelmts ? dbuf : dp; } #ifndef NDEBUG /* I don't quite trust the overlap calculations yet --rpm */ if (d==dbuf) { assert ((dp>=sp && dpshared->size) || (sp>=dp && spshared->size)); } else { assert ((dpshared->size<=sp) || (spshared->size<=dp)); } #endif /* * Put the data in little endian order so our loops aren't so * complicated. We'll do all the conversion stuff assuming * little endian and then we'll fix the order at the end. */ if (H5T_ORDER_BE==src->shared->u.atomic.order) { half_size = src->shared->size/2; for (i=0; ishared->size-(i+1)]; s[src->shared->size-(i+1)] = s[i]; s[i] = tmp; } } /* * What is the bit number for the msb bit of S which is set? The * bit number is relative to the significant part of the number. */ sfirst = H5T_bit_find (s, src->shared->u.atomic.offset, src->shared->u.atomic.prec, H5T_BIT_MSB, TRUE); first = (size_t)sfirst; /* Set these variables to default */ except_ret = H5T_CONV_UNHANDLED; reverse = TRUE; if (sfirst<0) { /* * The source has no bits set and must therefore be zero. * Set the destination to zero. */ H5T_bit_set (d, dst->shared->u.atomic.offset, dst->shared->u.atomic.prec, FALSE); } else if (H5T_SGN_NONE==src->shared->u.atomic.u.i.sign && H5T_SGN_NONE==dst->shared->u.atomic.u.i.sign) { /* * Source and destination are both unsigned, but if the * source has more precision bits than the destination then * it's possible to overflow. When overflow occurs the * destination will be set to the maximum possible value. */ if (src->shared->u.atomic.prec <= dst->shared->u.atomic.prec) { H5T_bit_copy (d, dst->shared->u.atomic.offset, s, src->shared->u.atomic.offset, src->shared->u.atomic.prec); H5T_bit_set (d, dst->shared->u.atomic.offset+src->shared->u.atomic.prec, dst->shared->u.atomic.prec-src->shared->u.atomic.prec, FALSE); } else if (first>=dst->shared->u.atomic.prec) { /*overflow*/ if(cb_struct.func) { /*If user's exception handler is present, use it*/ H5T_reverse_order(src_rev, s, src->shared->size, src->shared->u.atomic.order); /*reverse order first*/ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) { H5T_bit_set (d, dst->shared->u.atomic.offset, dst->shared->u.atomic.prec, TRUE); } else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") else if(except_ret == H5T_CONV_HANDLED) /*Don't reverse because user handles it already*/ reverse = FALSE; } else { H5T_bit_copy (d, dst->shared->u.atomic.offset, s, src->shared->u.atomic.offset, dst->shared->u.atomic.prec); } } else if (H5T_SGN_2==src->shared->u.atomic.u.i.sign && H5T_SGN_NONE==dst->shared->u.atomic.u.i.sign) { /* * If the source is signed and the destination isn't then we * can have overflow if the source contains more bits than * the destination (destination is set to the maximum * possible value) or overflow if the source is negative * (destination is set to zero). */ if (first+1 == src->shared->u.atomic.prec) { /*overflow - source is negative*/ if(cb_struct.func) { /*If user's exception handler is present, use it*/ H5T_reverse_order(src_rev, s, src->shared->size, src->shared->u.atomic.order); /*reverse order first*/ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_LOW, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) { H5T_bit_set (d, dst->shared->u.atomic.offset, dst->shared->u.atomic.prec, FALSE); } else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") else if(except_ret == H5T_CONV_HANDLED) /*Don't reverse because user handles it already*/ reverse = FALSE; } else if (src->shared->u.atomic.prec < dst->shared->u.atomic.prec) { H5T_bit_copy (d, dst->shared->u.atomic.offset, s, src->shared->u.atomic.offset, src->shared->u.atomic.prec-1); H5T_bit_set (d, dst->shared->u.atomic.offset+src->shared->u.atomic.prec-1, (dst->shared->u.atomic.prec-src->shared->u.atomic.prec)+1, FALSE); } else if (first>=dst->shared->u.atomic.prec) { /*overflow - source is positive*/ if(cb_struct.func) { /*If user's exception handler is present, use it*/ H5T_reverse_order(src_rev, s, src->shared->size, src->shared->u.atomic.order); /*reverse order first*/ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) H5T_bit_set (d, dst->shared->u.atomic.offset, dst->shared->u.atomic.prec, TRUE); else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") else if(except_ret == H5T_CONV_HANDLED) /*Don't reverse because user handles it already*/ reverse = FALSE; } else { H5T_bit_copy (d, dst->shared->u.atomic.offset, s, src->shared->u.atomic.offset, dst->shared->u.atomic.prec); } } else if (H5T_SGN_NONE==src->shared->u.atomic.u.i.sign && H5T_SGN_2==dst->shared->u.atomic.u.i.sign) { /* * If the source is not signed but the destination is then * overflow can occur in which case the destination is set to * the largest possible value (all bits set except the msb). */ if (first+1 >= dst->shared->u.atomic.prec) { /*overflow*/ if(cb_struct.func) { /*If user's exception handler is present, use it*/ H5T_reverse_order(src_rev, s, src->shared->size, src->shared->u.atomic.order); /*reverse order first*/ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) { H5T_bit_set (d, dst->shared->u.atomic.offset, dst->shared->u.atomic.prec-1, TRUE); H5T_bit_set (d, (dst->shared->u.atomic.offset + dst->shared->u.atomic.prec-1), 1, FALSE); } else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") else if(except_ret == H5T_CONV_HANDLED) /*Don't reverse because user handles it already*/ reverse = FALSE; } else if (src->shared->u.atomic.precshared->u.atomic.prec) { H5T_bit_copy (d, dst->shared->u.atomic.offset, s, src->shared->u.atomic.offset, src->shared->u.atomic.prec); H5T_bit_set (d, dst->shared->u.atomic.offset+src->shared->u.atomic.prec, dst->shared->u.atomic.prec-src->shared->u.atomic.prec, FALSE); } else { H5T_bit_copy (d, dst->shared->u.atomic.offset, s, src->shared->u.atomic.offset, dst->shared->u.atomic.prec); } } else if (first+1 == src->shared->u.atomic.prec) { /* * Both the source and the destination are signed and the * source value is negative. We could experience overflow * if the destination isn't wide enough in which case the * destination is set to a negative number with the largest * possible magnitude. */ ssize_t sfz = H5T_bit_find (s, src->shared->u.atomic.offset, src->shared->u.atomic.prec-1, H5T_BIT_MSB, FALSE); size_t fz = (size_t)sfz; if (sfz>=0 && fz+1>=dst->shared->u.atomic.prec) { /*overflow*/ if(cb_struct.func) { /*If user's exception handler is present, use it*/ H5T_reverse_order(src_rev, s, src->shared->size, src->shared->u.atomic.order); /*reverse order first*/ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_LOW, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) { H5T_bit_set (d, dst->shared->u.atomic.offset, dst->shared->u.atomic.prec-1, FALSE); H5T_bit_set (d, (dst->shared->u.atomic.offset + dst->shared->u.atomic.prec-1), 1, TRUE); } else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") else if(except_ret == H5T_CONV_HANDLED) /*Don't reverse because user handles it already*/ reverse = FALSE; } else if (src->shared->u.atomic.precshared->u.atomic.prec) { H5T_bit_copy (d, dst->shared->u.atomic.offset, s, src->shared->u.atomic.offset, src->shared->u.atomic.prec); H5T_bit_set (d, dst->shared->u.atomic.offset+src->shared->u.atomic.prec, dst->shared->u.atomic.prec-src->shared->u.atomic.prec, TRUE); } else { H5T_bit_copy (d, dst->shared->u.atomic.offset, s, src->shared->u.atomic.offset, dst->shared->u.atomic.prec); } } else { /* * Source and destination are both signed but the source * value is positive. We could have an overflow in which * case the destination is set to the largest possible * positive value. */ if (first+1>=dst->shared->u.atomic.prec) { /*overflow*/ if(cb_struct.func) { /*If user's exception handler is present, use it*/ H5T_reverse_order(src_rev, s, src->shared->size, src->shared->u.atomic.order); /*reverse order first*/ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) { H5T_bit_set (d, dst->shared->u.atomic.offset, dst->shared->u.atomic.prec-1, TRUE); H5T_bit_set (d, (dst->shared->u.atomic.offset + dst->shared->u.atomic.prec-1), 1, FALSE); } else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") else if(except_ret == H5T_CONV_HANDLED) /*Don't reverse because user handles it already*/ reverse = FALSE; } else if (src->shared->u.atomic.precshared->u.atomic.prec) { H5T_bit_copy (d, dst->shared->u.atomic.offset, s, src->shared->u.atomic.offset, src->shared->u.atomic.prec); H5T_bit_set (d, dst->shared->u.atomic.offset+src->shared->u.atomic.prec, dst->shared->u.atomic.prec-src->shared->u.atomic.prec, FALSE); } else { H5T_bit_copy (d, dst->shared->u.atomic.offset, s, src->shared->u.atomic.offset, dst->shared->u.atomic.prec); } } /* * Set padding areas in destination. */ if (dst->shared->u.atomic.offset>0) { assert (H5T_PAD_ZERO==dst->shared->u.atomic.lsb_pad || H5T_PAD_ONE==dst->shared->u.atomic.lsb_pad); H5T_bit_set (d, 0, dst->shared->u.atomic.offset, (hbool_t)(H5T_PAD_ONE==dst->shared->u.atomic.lsb_pad)); } if (dst->shared->u.atomic.offset+dst->shared->u.atomic.prec!=8*dst->shared->size) { assert (H5T_PAD_ZERO==dst->shared->u.atomic.msb_pad || H5T_PAD_ONE==dst->shared->u.atomic.msb_pad); H5T_bit_set (d, dst->shared->u.atomic.offset+dst->shared->u.atomic.prec, 8*dst->shared->size - (dst->shared->u.atomic.offset+ dst->shared->u.atomic.prec), (hbool_t)(H5T_PAD_ONE==dst->shared->u.atomic.msb_pad)); } /* * Put the destination in the correct byte order. See note at * beginning of loop. */ if (H5T_ORDER_BE==dst->shared->u.atomic.order && reverse) { half_size = dst->shared->size/2; for (i=0; ishared->size-(i+1)]; d[dst->shared->size-(i+1)] = d[i]; d[i] = tmp; } } /* * If we had used a temporary buffer for the destination then we * should copy the value to the true destination buffer. */ if (d==dbuf) HDmemcpy (dp, d, dst->shared->size); if (buf_stride) { sp += direction * buf_stride; dp += direction * buf_stride; } else { sp += direction * src->shared->size; dp += direction * dst->shared->size; } } break; default: HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unknown conversion command"); } done: if(src_rev) H5MM_free(src_rev); FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_f_f * * Purpose: Convert one floating point type to another. This is a catch * all for floating point conversions and is probably not * particularly fast! * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Tuesday, June 23, 1998 * * Modifications: * Robb Matzke, 7 Jul 1998 * Added overflow handling. * * Robb Matzke, 1999-06-16 * Added support for non-zero strides. If BUF_STRIDE is non-zero * then convert one value at each memory location advancing * BUF_STRIDE bytes each time; otherwise assume both source and * destination values are packed. * * Robb Matzke, 2001-02-02 * Oops, forgot to increment the exponent when rounding the * significand resulted in a carry. Thanks to Guillaume Colin * de Verdiere for finding this one! *------------------------------------------------------------------------- */ herr_t H5T_conv_f_f (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t dxpl_id) { /* Traversal-related variables */ H5T_t *src_p; /*source data type */ H5T_t *dst_p; /*destination data type */ H5T_atomic_t src; /*atomic source info */ H5T_atomic_t dst; /*atomic destination info */ int direction; /*forward or backward traversal */ size_t elmtno; /*element number */ size_t half_size; /*half the type size */ size_t olap; /*num overlapping elements */ ssize_t bitno; /*bit number */ uint8_t *s, *sp, *d, *dp; /*source and dest traversal ptrs*/ uint8_t *src_rev=NULL; /*order-reversed source buffer */ uint8_t dbuf[64]; /*temp destination buffer */ /* Conversion-related variables */ hssize_t expo; /*exponent */ hssize_t expo_max; /*maximum possible dst exponent */ size_t msize=0; /*useful size of mantissa in src*/ size_t mpos; /*offset to useful mant is src */ size_t mrsh; /*amount to right shift mantissa*/ hbool_t carry=0; /*carry after rounding mantissa */ size_t i; /*miscellaneous counters */ size_t implied; /*destination implied bits */ hbool_t denormalized=FALSE; /*is either source or destination denormalized?*/ H5P_genplist_t *plist; /*property list pointer */ H5T_conv_cb_t cb_struct={NULL, NULL}; /*conversion callback structure */ H5T_conv_ret_t except_ret; /*return of callback function */ hbool_t reverse; /*if reverse the order of destination */ herr_t ret_value=SUCCEED; /*return value */ FUNC_ENTER_NOAPI(H5T_conv_f_f, FAIL); switch (cdata->command) { case H5T_CONV_INIT: if (NULL==(src_p=H5I_object(src_id)) || NULL==(dst_p=H5I_object(dst_id))) HGOTO_ERROR (H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); src = src_p->shared->u.atomic; dst = dst_p->shared->u.atomic; if (H5T_ORDER_LE!=src.order && H5T_ORDER_BE!=src.order) HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unsupported byte order"); if (H5T_ORDER_LE!=dst.order && H5T_ORDER_BE!=dst.order) HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unsupported byte order"); if (dst_p->shared->size>sizeof(dbuf)) HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "destination size is too large"); if (8*sizeof(expo)-1need_bkg = H5T_BKG_NO; break; case H5T_CONV_FREE: break; case H5T_CONV_CONV: /* Get the data types */ if (NULL==(src_p=H5I_object(src_id)) || NULL==(dst_p=H5I_object(dst_id))) HGOTO_ERROR (H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); src = src_p->shared->u.atomic; dst = dst_p->shared->u.atomic; expo_max = ((hssize_t)1 << dst.u.f.esize) - 1; /* * Do we process the values from beginning to end or vice versa? Also, * how many of the elements have the source and destination areas * overlapping? */ if (src_p->shared->size==dst_p->shared->size || buf_stride) { sp = dp = (uint8_t*)buf; direction = 1; olap = nelmts; } else if (src_p->shared->size>=dst_p->shared->size) { double olap_d = HDceil((double)(dst_p->shared->size)/ (double)(src_p->shared->size-dst_p->shared->size)); olap = (size_t)olap_d; sp = dp = (uint8_t*)buf; direction = 1; } else { double olap_d = HDceil((double)(src_p->shared->size)/ (double)(dst_p->shared->size-src_p->shared->size)); olap = (size_t)olap_d; sp = (uint8_t*)buf + (nelmts-1) * src_p->shared->size; dp = (uint8_t*)buf + (nelmts-1) * dst_p->shared->size; direction = -1; } /* Get the plist structure */ if(NULL == (plist = H5P_object_verify(dxpl_id,H5P_DATASET_XFER))) HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find property list for ID"); /* Get conversion exception callback property */ if (H5P_get(plist,H5D_XFER_CONV_CB_NAME,&cb_struct)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "unable to get conversion exception callback"); /* Allocate space for order-reversed source buffer */ src_rev = (uint8_t*)H5MM_calloc(src_p->shared->size); /* The conversion loop */ for (elmtno=0; elmtno0) { s = sp; d = elmtno= nelmts ? dbuf : dp; } #ifndef NDEBUG /* I don't quite trust the overlap calculations yet --rpm */ if (d==dbuf) { assert ((dp>=sp && dpshared->size) || (sp>=dp && spshared->size)); } else { assert ((dpshared->size<=sp) || (spshared->size<=dp)); } #endif /* * Put the data in little endian order so our loops aren't so * complicated. We'll do all the conversion stuff assuming * little endian and then we'll fix the order at the end. */ if (H5T_ORDER_BE==src.order) { half_size = src_p->shared->size/2; for (i=0; ishared->size-(i+1)]; s[src_p->shared->size-(i+1)] = s[i]; s[i] = tmp; } } /* * Check for special cases: +0, -0, +Inf, -Inf, NaN */ if (H5T_bit_find (s, src.u.f.mpos, src.u.f.msize, H5T_BIT_LSB, TRUE)<0) { if (H5T_bit_find (s, src.u.f.epos, src.u.f.esize, H5T_BIT_LSB, TRUE)<0) { /* +0 or -0 */ H5T_bit_copy (d, dst.u.f.sign, s, src.u.f.sign, 1); H5T_bit_set (d, dst.u.f.epos, dst.u.f.esize, FALSE); H5T_bit_set (d, dst.u.f.mpos, dst.u.f.msize, FALSE); goto padding; } else if (H5T_bit_find (s, src.u.f.epos, src.u.f.esize, H5T_BIT_LSB, FALSE)<0) { /* +Inf or -Inf */ H5T_bit_copy (d, dst.u.f.sign, s, src.u.f.sign, 1); H5T_bit_set (d, dst.u.f.epos, dst.u.f.esize, TRUE); H5T_bit_set (d, dst.u.f.mpos, dst.u.f.msize, FALSE); /*If the destination no implied mantissa bit, we'll need to set *the 1st bit of mantissa to 1. The Intel-Linux long double is *this case.*/ if (H5T_NORM_NONE==dst.u.f.norm) H5T_bit_set (d, dst.u.f.mpos+dst.u.f.msize-1, 1, TRUE); goto padding; } } else if (H5T_NORM_NONE==src.u.f.norm && H5T_bit_find (s, src.u.f.mpos, src.u.f.msize-1, H5T_BIT_LSB, TRUE)<0 && H5T_bit_find (s, src.u.f.epos, src.u.f.esize, H5T_BIT_LSB, FALSE)<0) { /*This is a special case for the source of no implied mantissa bit. *If the exponent bits are all 1s and only the 1st bit of mantissa *is set to 1. It's infinity. The Intel-Linux "long double" is this case.*/ /* +Inf or -Inf */ H5T_bit_copy (d, dst.u.f.sign, s, src.u.f.sign, 1); H5T_bit_set (d, dst.u.f.epos, dst.u.f.esize, TRUE); H5T_bit_set (d, dst.u.f.mpos, dst.u.f.msize, FALSE); /*If the destination no implied mantissa bit, we'll need to set *the 1st bit of mantissa to 1.*/ if (H5T_NORM_NONE==dst.u.f.norm) H5T_bit_set (d, dst.u.f.mpos+dst.u.f.msize-1, 1, TRUE); goto padding; } else if (H5T_bit_find (s, src.u.f.epos, src.u.f.esize, H5T_BIT_LSB, FALSE)<0) { /* * NaN. There are many NaN values, so we just set all bits of * the significand. */ H5T_bit_copy (d, dst.u.f.sign, s, src.u.f.sign, 1); H5T_bit_set (d, dst.u.f.epos, dst.u.f.esize, TRUE); H5T_bit_set(d, dst.u.f.mpos, dst.u.f.msize, TRUE); goto padding; } /* * Get the exponent as an unsigned quantity from the section of * the source bit field where it's located. Don't worry about * the exponent bias yet. */ expo = H5T_bit_get_d(s, src.u.f.epos, src.u.f.esize); if(expo==0) denormalized=TRUE; /* * Set markers for the source mantissa, excluding the leading `1' * (might be implied). */ implied = 1; mpos = src.u.f.mpos; mrsh = 0; if (0==expo || H5T_NORM_NONE==src.u.f.norm) { if ((bitno=H5T_bit_find(s, src.u.f.mpos, src.u.f.msize, H5T_BIT_MSB, TRUE))>0) { msize = bitno; } else if (0==bitno) { msize = 1; H5T_bit_set(s, src.u.f.mpos, 1, FALSE); } } else if (H5T_NORM_IMPLIED==src.u.f.norm) { msize = src.u.f.msize; } else { assert("normalization method not implemented yet" && 0); HDabort(); } /* * The sign for the destination is the same as the sign for the * source in all cases. */ H5T_bit_copy (d, dst.u.f.sign, s, src.u.f.sign, 1); /* * Calculate the true source exponent by adjusting according to * the source exponent bias. */ if (0==expo || H5T_NORM_NONE==src.u.f.norm) { assert(bitno>=0); expo -= (src.u.f.ebias-1) + (src.u.f.msize-bitno); } else if (H5T_NORM_IMPLIED==src.u.f.norm) { expo -= src.u.f.ebias; } else { assert("normalization method not implemented yet" && 0); HDabort(); } /* * If the destination is not normalized then right shift the * mantissa by one. */ if (H5T_NORM_NONE==dst.u.f.norm) mrsh++; /* * Calculate the destination exponent by adding the destination * bias and clipping by the minimum and maximum possible * destination exponent values. */ expo += dst.u.f.ebias; if (expo < -(hssize_t)(dst.u.f.msize)) { /* The exponent is way too small. Result is zero. */ expo = 0; H5T_bit_set(d, dst.u.f.mpos, dst.u.f.msize, FALSE); msize = 0; } else if (expo<=0) { /* * The exponent is too small to fit in the exponent field, * but by shifting the mantissa to the right we can * accomodate that value. The mantissa of course is no * longer normalized. */ H5_ASSIGN_OVERFLOW(mrsh,(mrsh+1-expo),hssize_t,size_t); expo = 0; denormalized=TRUE; } else if (expo>=expo_max) { /* * The exponent is too large to fit in the available region * or it results in the maximum possible value. Use positive * or negative infinity instead unless the application * specifies something else. Before calling the overflow * handler make sure the source buffer we hand it is in the * original byte order. */ if(cb_struct.func) { /*If user's exception handler is present, use it*/ /*reverse order first*/ H5T_reverse_order(src_rev, s, src_p->shared->size, src_p->shared->u.atomic.order); except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) { expo = expo_max; H5T_bit_set(d, dst.u.f.mpos, dst.u.f.msize, FALSE); msize = 0; } else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") else if(except_ret == H5T_CONV_HANDLED) { reverse = FALSE; goto next; } } /* * If the destination mantissa is smaller than the source * mantissa then round the source mantissa. Rounding may cause a * carry in which case the exponent has to be re-evaluated for * overflow. That is, if `carry' is clear then the implied * mantissa bit is `1', else it is `10' binary. */ if (msize>0 && mrsh<=dst.u.f.msize && mrsh+msize>dst.u.f.msize) { bitno = (ssize_t)(mrsh+msize - dst.u.f.msize); assert(bitno>=0 && (size_t)bitno<=msize); /*If the 1st bit being cut off is set and source isn't denormalized.*/ if(H5T_bit_get_d(s, mpos+bitno-1, 1) && !denormalized) { /*Don't do rounding if exponent is 111...110 and mantissa is 111...11. *To do rounding and increment exponent in this case will create an infinity value.*/ if((H5T_bit_find(s, mpos+bitno, msize-bitno, H5T_BIT_LSB, FALSE)>=0 || expodst.u.f.msize+1) { H5T_bit_set(d, dst.u.f.mpos, dst.u.f.msize, FALSE); } else if (mrsh==dst.u.f.msize+1) { H5T_bit_set(d, dst.u.f.mpos+1, dst.u.f.msize-1, FALSE); H5T_bit_set(d, dst.u.f.mpos, 1, TRUE); } else if (mrsh==dst.u.f.msize) { H5T_bit_set(d, dst.u.f.mpos, dst.u.f.msize, FALSE); H5T_bit_set_d(d, dst.u.f.mpos, MIN(2, dst.u.f.msize), (hsize_t)implied); } else { if (mrsh>0) { H5T_bit_set(d, dst.u.f.mpos+dst.u.f.msize-mrsh, mrsh, FALSE); H5T_bit_set_d(d, dst.u.f.mpos+dst.u.f.msize-mrsh, 2, (hsize_t)implied); } if (mrsh+msize>=dst.u.f.msize) { H5T_bit_copy(d, dst.u.f.mpos, s, (mpos+msize+mrsh-dst.u.f.msize), dst.u.f.msize-mrsh); } else { H5T_bit_copy(d, dst.u.f.mpos+dst.u.f.msize-(mrsh+msize), s, mpos, msize); H5T_bit_set(d, dst.u.f.mpos, dst.u.f.msize-(mrsh+msize), FALSE); } } /* Write the exponent */ if (carry) { expo++; if (expo>=expo_max) { /* * The exponent is too large to fit in the available * region or it results in the maximum possible value. * Use positive or negative infinity instead unless the * application specifies something else. Before * calling the overflow handler make sure the source * buffer we hand it is in the original byte order. */ if(cb_struct.func) { /*If user's exception handler is present, use it*/ /*reverse order first*/ H5T_reverse_order(src_rev, s, src_p->shared->size, src_p->shared->u.atomic.order); except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) { expo = expo_max; H5T_bit_set(d, dst.u.f.mpos, dst.u.f.msize, FALSE); } else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") else if(except_ret == H5T_CONV_HANDLED) { reverse = FALSE; goto next; } } } H5_CHECK_OVERFLOW(expo,hssize_t,hsize_t); H5T_bit_set_d(d, dst.u.f.epos, dst.u.f.esize, (hsize_t)expo); padding: /* * Set external padding areas */ if (dst.offset>0) { assert (H5T_PAD_ZERO==dst.lsb_pad || H5T_PAD_ONE==dst.lsb_pad); H5T_bit_set (d, 0, dst.offset, (hbool_t)(H5T_PAD_ONE==dst.lsb_pad)); } if (dst.offset+dst.prec!=8*dst_p->shared->size) { assert (H5T_PAD_ZERO==dst.msb_pad || H5T_PAD_ONE==dst.msb_pad); H5T_bit_set (d, dst.offset+dst.prec, 8*dst_p->shared->size - (dst.offset+dst.prec), (hbool_t)(H5T_PAD_ONE==dst.msb_pad)); } /* * Put the destination in the correct byte order. See note at * beginning of loop. */ if (H5T_ORDER_BE==dst.order && reverse) { half_size = dst_p->shared->size/2; for (i=0; ishared->size-(i+1)]; d[dst_p->shared->size-(i+1)] = d[i]; d[i] = tmp; } } /* * If we had used a temporary buffer for the destination then we * should copy the value to the true destination buffer. */ next: if (d==dbuf) HDmemcpy (dp, d, dst_p->shared->size); if (buf_stride) { sp += direction * buf_stride; dp += direction * buf_stride; } else { sp += direction * src_p->shared->size; dp += direction * dst_p->shared->size; } } break; default: HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unknown conversion command"); } done: if(src_rev) H5MM_free(src_rev); FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_s_s * * Purpose: Convert one fixed-length string type to another. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Friday, August 7, 1998 * * Modifications: * Robb Matzke, 1999-06-16 * Added support for non-zero strides. If BUF_STRIDE is non-zero * then convert one value at each memory location advancing * BUF_STRIDE bytes each time; otherwise assume both source and * destination values are packed. *------------------------------------------------------------------------- */ herr_t H5T_conv_s_s (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { H5T_t *src=NULL; /*source data type */ H5T_t *dst=NULL; /*destination data type */ int direction; /*direction of traversal */ size_t elmtno; /*element number */ size_t olap; /*num overlapping elements */ size_t nchars=0; /*number of characters copied */ uint8_t *s, *sp, *d, *dp; /*src and dst traversal pointers*/ uint8_t *dbuf=NULL; /*temp buf for overlap convers. */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_s_s, FAIL); switch (cdata->command) { case H5T_CONV_INIT: if (NULL==(src=H5I_object(src_id)) || NULL==(dst=H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); if (8*src->shared->size != src->shared->u.atomic.prec || 8*dst->shared->size != dst->shared->u.atomic.prec) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "bad precision"); if (0 != src->shared->u.atomic.offset || 0 != dst->shared->u.atomic.offset) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "bad offset"); if (H5T_CSET_ASCII != src->shared->u.atomic.u.s.cset || H5T_CSET_ASCII != dst->shared->u.atomic.u.s.cset) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "bad character set"); if (src->shared->u.atomic.u.s.pad<0 || src->shared->u.atomic.u.s.pad>=H5T_NPAD || dst->shared->u.atomic.u.s.pad<0 || dst->shared->u.atomic.u.s.pad>=H5T_NPAD) HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "bad character padding"); cdata->need_bkg = H5T_BKG_NO; break; case H5T_CONV_FREE: break; case H5T_CONV_CONV: /* Get the data types */ if (NULL==(src=H5I_object(src_id)) || NULL==(dst=H5I_object(dst_id))) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); /* * Do we process the values from beginning to end or vice versa? Also, * how many of the elements have the source and destination areas * overlapping? */ if (src->shared->size==dst->shared->size || buf_stride) { /* * When the source and destination are the same size we can do * all the conversions in place. */ sp = dp = (uint8_t*)buf; direction = 1; olap = 0; } else if (src->shared->size>=dst->shared->size) { double olapd = HDceil((double)(dst->shared->size)/ (double)(src->shared->size-dst->shared->size)); olap = (size_t)olapd; sp = dp = (uint8_t*)buf; direction = 1; } else { double olapd = HDceil((double)(src->shared->size)/ (double)(dst->shared->size-src->shared->size)); olap = (size_t)olapd; sp = (uint8_t*)buf + (nelmts-1) * src->shared->size; dp = (uint8_t*)buf + (nelmts-1) * dst->shared->size; direction = -1; } /* Allocate the overlap buffer */ if (NULL==(dbuf=H5MM_malloc(dst->shared->size))) HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed for string conversion"); /* The conversion loop. */ for (elmtno=0; elmtno0) { s = sp; d = elmtno= nelmts ? dbuf : dp; } #ifndef NDEBUG /* I don't quite trust the overlap calculations yet --rpm */ if (src->shared->size==dst->shared->size || buf_stride) { assert(s==d); } else if (d==dbuf) { assert((dp>=sp && dpshared->size) || (sp>=dp && spshared->size)); } else { assert((dpshared->size<=sp) || (spshared->size<=dp)); } #endif /* Copy characters from source to destination */ switch (src->shared->u.atomic.u.s.pad) { case H5T_STR_NULLTERM: for (nchars=0; ncharsshared->size && ncharsshared->size && s[nchars]; nchars++) { d[nchars] = s[nchars]; } break; case H5T_STR_NULLPAD: for (nchars=0; ncharsshared->size && ncharsshared->size && s[nchars]; nchars++) { d[nchars] = s[nchars]; } break; case H5T_STR_SPACEPAD: nchars = src->shared->size; while (nchars>0 && ' '==s[nchars-1]) --nchars; nchars = MIN(dst->shared->size, nchars); HDmemcpy(d, s, nchars); break; case H5T_STR_RESERVED_3: case H5T_STR_RESERVED_4: case H5T_STR_RESERVED_5: case H5T_STR_RESERVED_6: case H5T_STR_RESERVED_7: case H5T_STR_RESERVED_8: case H5T_STR_RESERVED_9: case H5T_STR_RESERVED_10: case H5T_STR_RESERVED_11: case H5T_STR_RESERVED_12: case H5T_STR_RESERVED_13: case H5T_STR_RESERVED_14: case H5T_STR_RESERVED_15: case H5T_STR_ERROR: HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "source string padding method not supported"); } /* Terminate or pad the destination */ switch (dst->shared->u.atomic.u.s.pad) { case H5T_STR_NULLTERM: while (ncharsshared->size) d[nchars++] = '\0'; d[dst->shared->size-1] = '\0'; break; case H5T_STR_NULLPAD: while (ncharsshared->size) d[nchars++] = '\0'; break; case H5T_STR_SPACEPAD: while (ncharsshared->size) d[nchars++] = ' '; break; case H5T_STR_RESERVED_3: case H5T_STR_RESERVED_4: case H5T_STR_RESERVED_5: case H5T_STR_RESERVED_6: case H5T_STR_RESERVED_7: case H5T_STR_RESERVED_8: case H5T_STR_RESERVED_9: case H5T_STR_RESERVED_10: case H5T_STR_RESERVED_11: case H5T_STR_RESERVED_12: case H5T_STR_RESERVED_13: case H5T_STR_RESERVED_14: case H5T_STR_RESERVED_15: case H5T_STR_ERROR: HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "destination string padding method not supported"); } /* * If we used a temporary buffer for the destination then we * should copy the value to the true destination buffer. */ if (d==dbuf) HDmemcpy(dp, d, dst->shared->size); if (buf_stride) { sp += direction * buf_stride; dp += direction * buf_stride; } else { sp += direction * src->shared->size; dp += direction * dst->shared->size; } } break; default: HGOTO_ERROR(H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unknown converson command"); } done: H5MM_xfree(dbuf); FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_schar_uchar * * Purpose: Converts `signed char' to `unsigned char' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Monday, November 16, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_schar_uchar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_schar_uchar, FAIL); H5T_CONV_su(SCHAR, UCHAR, signed char, unsigned char, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uchar_schar * * Purpose: Converts `unsigned char' to `signed char' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Monday, November 16, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uchar_schar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uchar_schar, FAIL); H5T_CONV_us(UCHAR, SCHAR, unsigned char, signed char, -, SCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_schar_short * * Purpose: Converts `signed char' to `short' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_schar_short(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_schar_short, FAIL); H5T_CONV_sS(SCHAR, SHORT, signed char, short, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_schar_ushort * * Purpose: Converts `signed char' to `unsigned short' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_schar_ushort(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_schar_ushort, FAIL); H5T_CONV_sU(SCHAR, USHORT, signed char, unsigned short, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uchar_short * * Purpose: Converts `unsigned char' to `short' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uchar_short(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uchar_short, FAIL); H5T_CONV_uS(UCHAR, SHORT, unsigned char, short, -, SHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uchar_ushort * * Purpose: Converts `unsigned char' to `unsigned short' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uchar_ushort(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uchar_ushort, FAIL); H5T_CONV_uU(UCHAR, USHORT, unsigned char, unsigned short, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_schar_int * * Purpose: Converts `signed char' to `int' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_schar_int(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_schar_int, FAIL); H5T_CONV_sS(SCHAR, INT, signed char, int, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_schar_uint * * Purpose: Converts `signed char' to `unsigned int' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_schar_uint(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_schar_uint, FAIL); H5T_CONV_sU(SCHAR, UINT, signed char, unsigned, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uchar_int * * Purpose: Converts `unsigned char' to `int' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uchar_int(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uchar_int, FAIL); H5T_CONV_uS(UCHAR, INT, unsigned char, int, -, INT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uchar_uint * * Purpose: Converts `unsigned char' to `unsigned int' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uchar_uint(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uchar_uint, FAIL); H5T_CONV_uU(UCHAR, UINT, unsigned char, unsigned, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_schar_long * * Purpose: Converts `signed char' to `long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_schar_long(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_schar_long, FAIL); H5T_CONV_sS(SCHAR, LONG, signed char, long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_schar_ulong * * Purpose: Converts `signed char' to `unsigned long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_schar_ulong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_schar_ulong, FAIL); H5T_CONV_sU(SCHAR, ULONG, signed char, unsigned long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uchar_long * * Purpose: Converts `unsigned char' to `long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uchar_long(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uchar_long, FAIL); H5T_CONV_uS(UCHAR, LONG, unsigned char, long, -, LONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uchar_ulong * * Purpose: Converts `unsigned char' to `unsigned long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uchar_ulong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uchar_ulong, FAIL); H5T_CONV_uU(UCHAR, ULONG, unsigned char, unsigned long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_schar_llong * * Purpose: Converts `signed char' to `long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_schar_llong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_schar_llong, FAIL); H5T_CONV_sS(SCHAR, LLONG, signed char, long_long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_schar_ullong * * Purpose: Converts `signed char' to `unsigned long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_schar_ullong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_schar_ullong, FAIL); H5T_CONV_sU(SCHAR, ULLONG, signed char, unsigned long_long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uchar_llong * * Purpose: Converts `unsigned char' to `long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uchar_llong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uchar_llong, FAIL); H5T_CONV_uS(UCHAR, LLONG, unsigned char, long_long, -, LLONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uchar_ullong * * Purpose: Converts `unsigned char' to `unsigned long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uchar_ullong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uchar_ullong, FAIL); H5T_CONV_uU(UCHAR, ULLONG, unsigned char, unsigned long_long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_short_schar * * Purpose: Converts `short' to `signed char' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_short_schar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_short_schar, FAIL); H5T_CONV_Ss(SHORT, SCHAR, short, signed char, SCHAR_MIN, SCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_short_uchar * * Purpose: Converts `short' to `unsigned char' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_short_uchar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_short_uchar, FAIL); H5T_CONV_Su(SHORT, UCHAR, short, unsigned char, -, UCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ushort_schar * * Purpose: Converts `unsigned short' to `signed char' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ushort_schar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ushort_schar, FAIL); H5T_CONV_Us(USHORT, SCHAR, unsigned short, signed char, -, SCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ushort_uchar * * Purpose: Converts `unsigned short' to `unsigned char' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ushort_uchar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ushort_uchar, FAIL); H5T_CONV_Uu(USHORT, UCHAR, unsigned short, unsigned char, -, UCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_short_ushort * * Purpose: Converts `short' to `unsigned short' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Monday, November 16, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_short_ushort(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_short_ushort, FAIL); H5T_CONV_su(SHORT, USHORT, short, unsigned short, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ushort_short * * Purpose: Converts `unsigned short' to `short' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Monday, November 16, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ushort_short(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ushort_short, FAIL); H5T_CONV_us(USHORT, SHORT, unsigned short, short, -, SHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_short_int * * Purpose: Converts `short' to `int' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_short_int(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_short_int, FAIL); H5T_CONV_sS(SHORT, INT, short, int, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_short_uint * * Purpose: Converts `short' to `unsigned int' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_short_uint(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_short_uint, FAIL); H5T_CONV_sU(SHORT, UINT, short, unsigned, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ushort_int * * Purpose: Converts `unsigned short' to `int' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ushort_int(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ushort_int, FAIL); H5T_CONV_uS(USHORT, INT, unsigned short, int, -, INT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ushort_uint * * Purpose: Converts `unsigned short' to `unsigned int' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ushort_uint(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ushort_uint, FAIL); H5T_CONV_uU(USHORT, UINT, unsigned short, unsigned, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_short_long * * Purpose: Converts `short' to `long' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_short_long(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_short_long, FAIL); H5T_CONV_sS(SHORT, LONG, short, long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_short_ulong * * Purpose: Converts `short' to `unsigned long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_short_ulong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_short_ulong, FAIL); H5T_CONV_sU(SHORT, ULONG, short, unsigned long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ushort_long * * Purpose: Converts `unsigned short' to `long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ushort_long(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ushort_long, FAIL); H5T_CONV_uS(USHORT, LONG, unsigned short, long, -, LONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ushort_ulong * * Purpose: Converts `unsigned short' to `unsigned long' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ushort_ulong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ushort_ulong, FAIL); H5T_CONV_uU(USHORT, ULONG, unsigned short, unsigned long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_short_llong * * Purpose: Converts `short' to `long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_short_llong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_short_llong, FAIL); H5T_CONV_sS(SHORT, LLONG, short, long_long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_short_ullong * * Purpose: Converts `short' to `unsigned long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_short_ullong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_short_ullong, FAIL); H5T_CONV_sU(SHORT, ULLONG, short, unsigned long_long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ushort_llong * * Purpose: Converts `unsigned short' to `long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ushort_llong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ushort_llong, FAIL); H5T_CONV_uS(USHORT, LLONG, unsigned short, long_long, -, LLONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ushort_ullong * * Purpose: Converts `unsigned short' to `unsigned long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ushort_ullong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ushort_ullong, FAIL); H5T_CONV_uU(USHORT, ULLONG, unsigned short, unsigned long_long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_int_schar * * Purpose: Converts `int' to `signed char' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_int_schar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_int_schar, FAIL); H5T_CONV_Ss(INT, SCHAR, int, signed char, SCHAR_MIN, SCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_int_uchar * * Purpose: Converts `int' to `unsigned char' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_int_uchar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_int_uchar, FAIL); H5T_CONV_Su(INT, UCHAR, int, unsigned char, -, UCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uint_schar * * Purpose: Converts `unsigned int' to `signed char' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uint_schar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uint_schar, FAIL); H5T_CONV_Us(UINT, SCHAR, unsigned, signed char, -, SCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uint_uchar * * Purpose: Converts `unsigned int' to `unsigned char' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uint_uchar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uint_uchar, FAIL); H5T_CONV_Uu(UINT, UCHAR, unsigned, unsigned char, -, UCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_int_short * * Purpose: Converts `int' to `short' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_int_short(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_int_short, FAIL); H5T_CONV_Ss(INT, SHORT, int, short, SHRT_MIN, SHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_int_ushort * * Purpose: Converts `int' to `unsigned short' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_int_ushort(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_int_ushort, FAIL); H5T_CONV_Su(INT, USHORT, int, unsigned short, -, USHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uint_short * * Purpose: Converts `unsigned int' to `short' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uint_short(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uint_short, FAIL); H5T_CONV_Us(UINT, SHORT, unsigned, short, -, SHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uint_ushort * * Purpose: Converts `unsigned int' to `unsigned short' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uint_ushort(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uint_ushort, FAIL); H5T_CONV_Uu(UINT, USHORT, unsigned, unsigned short, -, USHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_int_uint * * Purpose: Converts `int' to `unsigned int' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Monday, November 16, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_int_uint(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_int_uint, FAIL); H5T_CONV_su(INT, UINT, int, unsigned, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uint_int * * Purpose: Converts `unsigned int' to `int' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Monday, November 16, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uint_int(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uint_int, FAIL); H5T_CONV_us(UINT, INT, unsigned, int, -, INT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_int_long * * Purpose: Converts `int' to `long' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_int_long(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_int_long, FAIL); H5T_CONV_sS(INT, LONG, int, long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_int_ulong * * Purpose: Converts `int' to `unsigned long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_int_ulong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_int_ulong, FAIL); H5T_CONV_sU(INT, LONG, int, unsigned long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uint_long * * Purpose: Converts `unsigned int' to `long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uint_long(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uint_long, FAIL); H5T_CONV_uS(UINT, LONG, unsigned, long, -, LONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uint_ulong * * Purpose: Converts `unsigned int' to `unsigned long' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uint_ulong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uint_ulong, FAIL); H5T_CONV_uU(UINT, ULONG, unsigned, unsigned long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_int_llong * * Purpose: Converts `int' to `long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_int_llong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_int_llong, FAIL); H5T_CONV_sS(INT, LLONG, int, long_long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_int_ullong * * Purpose: Converts `int' to `unsigned long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_int_ullong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_int_ullong, FAIL); H5T_CONV_sU(INT, ULLONG, int, unsigned long_long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uint_llong * * Purpose: Converts `unsigned int' to `long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uint_llong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uint_llong, FAIL); H5T_CONV_uS(UINT, LLONG, unsigned, long_long, -, LLONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uint_ullong * * Purpose: Converts `unsigned int' to `unsigned long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uint_ullong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uint_ullong, FAIL); H5T_CONV_uU(UINT, ULLONG, unsigned, unsigned long_long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_long_schar * * Purpose: Converts `long' to `signed char' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_long_schar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_long_schar, FAIL); H5T_CONV_Ss(LONG, SCHAR, long, signed char, SCHAR_MIN, SCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_long_uchar * * Purpose: Converts `long' to `unsigned char' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_long_uchar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_long_uchar, FAIL); H5T_CONV_Su(LONG, UCHAR, long, unsigned char, -, UCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ulong_schar * * Purpose: Converts `unsigned long' to `signed char' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ulong_schar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ulong_schar, FAIL); H5T_CONV_Us(ULONG, SCHAR, unsigned long, signed char, -, SCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ulong_uchar * * Purpose: Converts `unsigned long' to `unsigned char' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ulong_uchar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ulong_uchar, FAIL); H5T_CONV_Uu(ULONG, UCHAR, unsigned long, unsigned char, -, UCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_long_short * * Purpose: Converts `long' to `short' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_long_short(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_long_short, FAIL); H5T_CONV_Ss(LONG, SHORT, long, short, SHRT_MIN, SHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_long_ushort * * Purpose: Converts `long' to `unsigned short' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_long_ushort(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_long_ushort, FAIL); H5T_CONV_Su(LONG, USHORT, long, unsigned short, -, USHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ulong_short * * Purpose: Converts `unsigned long' to `short' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ulong_short(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ulong_short, FAIL); H5T_CONV_Us(ULONG, SHORT, unsigned long, short, -, SHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ulong_ushort * * Purpose: Converts `unsigned long' to `unsigned short' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ulong_ushort(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ulong_ushort, FAIL); H5T_CONV_Uu(ULONG, USHORT, unsigned long, unsigned short, -, USHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_long_int * * Purpose: Converts `long' to `int' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_long_int(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_long_int, FAIL); H5T_CONV_Ss(LONG, INT, long, int, INT_MIN, INT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_long_uint * * Purpose: Converts `long' to `unsigned int' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_long_uint(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_long_uint, FAIL); H5T_CONV_Su(LONG, UINT, long, unsigned, -, UINT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ulong_int * * Purpose: Converts `unsigned long' to `int' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ulong_int(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ulong_int, FAIL); H5T_CONV_Us(ULONG, INT, unsigned long, int, -, INT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ulong_uint * * Purpose: Converts `unsigned long' to `unsigned int' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ulong_uint(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ulong_uint, FAIL); H5T_CONV_Uu(ULONG, UINT, unsigned long, unsigned, -, UINT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_long_ulong * * Purpose: Converts `long' to `unsigned long' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Monday, November 16, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_long_ulong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_long_ulong, FAIL); H5T_CONV_su(LONG, ULONG, long, unsigned long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ulong_long * * Purpose: Converts `unsigned long' to `long' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Monday, November 16, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ulong_long(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ulong_long, FAIL); H5T_CONV_us(ULONG, LONG, unsigned long, long, -, LONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_long_llong * * Purpose: Converts `long' to `long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_long_llong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_long_llong, FAIL); H5T_CONV_sS(LONG, LLONG, long, long_long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_long_ullong * * Purpose: Converts `long' to `unsigned long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_long_ullong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_long_ullong, FAIL); H5T_CONV_sU(LONG, ULLONG, long, unsigned long_long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ulong_llong * * Purpose: Converts `unsigned long' to `long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ulong_llong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ulong_llong, FAIL); H5T_CONV_uS(ULONG, LLONG, unsigned long, long_long, -, LLONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ulong_ullong * * Purpose: Converts `unsigned long' to `unsigned long_long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ulong_ullong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ulong_ullong, FAIL); H5T_CONV_uU(ULONG, ULLONG, unsigned long, unsigned long_long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_llong_schar * * Purpose: Converts `long_long' to `signed char' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_llong_schar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_llong_schar, FAIL); H5T_CONV_Ss(LLONG, SCHAR, long_long, signed char, SCHAR_MIN, SCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_llong_uchar * * Purpose: Converts `long_long' to `unsigned char' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_llong_uchar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_llong_uchar, FAIL); H5T_CONV_Su(LLONG, UCHAR, long_long, unsigned char, -, UCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ullong_schar * * Purpose: Converts `unsigned long_long' to `signed char' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ullong_schar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ullong_schar, FAIL); H5T_CONV_Us(ULLONG, SCHAR, unsigned long_long, signed char, -, SCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ullong_uchar * * Purpose: Converts `unsigned long_long' to `unsigned char' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ullong_uchar(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ullong_uchar, FAIL); H5T_CONV_Uu(ULLONG, UCHAR, unsigned long_long, unsigned char, -, UCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_llong_short * * Purpose: Converts `long_long' to `short' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_llong_short(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_llong_short, FAIL); H5T_CONV_Ss(LLONG, SHORT, long_long, short, SHRT_MIN, SHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_llong_ushort * * Purpose: Converts `long_long' to `unsigned short' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_llong_ushort(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_llong_ushort, FAIL); H5T_CONV_Su(LLONG, USHORT, long_long, unsigned short, -, USHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ullong_short * * Purpose: Converts `unsigned long_long' to `short' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ullong_short(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ullong_short, FAIL); H5T_CONV_Us(ULLONG, SHORT, unsigned long_long, short, -, SHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ullong_ushort * * Purpose: Converts `unsigned long_long' to `unsigned short' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ullong_ushort(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ullong_ushort, FAIL); H5T_CONV_Uu(ULLONG, USHORT, unsigned long_long, unsigned short, -, USHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_llong_int * * Purpose: Converts `long_long' to `int' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_llong_int(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_llong_int, FAIL); H5T_CONV_Ss(LLONG, INT, long_long, int, INT_MIN, INT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_llong_uint * * Purpose: Converts `long_long' to `unsigned int' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_llong_uint(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_llong_uint, FAIL); H5T_CONV_Su(LLONG, UINT, long_long, unsigned, -, UINT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ullong_int * * Purpose: Converts `unsigned long_long' to `int' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ullong_int(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ullong_int, FAIL); H5T_CONV_Us(ULLONG, INT, unsigned long_long, int, -, INT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ullong_uint * * Purpose: Converts `unsigned long_long' to `unsigned int' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ullong_uint(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ullong_uint, FAIL); H5T_CONV_Uu(ULLONG, UINT, unsigned long_long, unsigned, -, UINT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_llong_long * * Purpose: Converts `long_long' to `long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_llong_long(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_llong_long, FAIL); H5T_CONV_Ss(LLONG, LONG, long_long, long, LONG_MIN, LONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_llong_ulong * * Purpose: Converts `long_long' to `unsigned long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_llong_ulong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_llong_ulong, FAIL); H5T_CONV_Su(LLONG, ULONG, long_long, unsigned long, -, ULONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ullong_long * * Purpose: Converts `unsigned long_long' to `long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ullong_long(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ullong_long, FAIL); H5T_CONV_Us(ULLONG, LONG, unsigned long_long, long, -, LONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ullong_ulong * * Purpose: Converts `unsigned long_long' to `unsigned long' * * Return: Success: Non-negative * * Failure: Negative * * Programmer: Robb Matzke * Friday, November 13, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ullong_ulong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ullong_ulong, FAIL); H5T_CONV_Uu(ULLONG, ULONG, unsigned long_long, unsigned long, -, ULONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_llong_ullong * * Purpose: Converts `long_long' to `unsigned long_long' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Monday, November 16, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_llong_ullong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_llong_ullong, FAIL); H5T_CONV_su(LLONG, ULLONG, long_long, unsigned long_long, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ullong_llong * * Purpose: Converts `unsigned long_long' to `long_long' * * Return: Success: non-negative * * Failure: negative * * Programmer: Robb Matzke * Monday, November 16, 1998 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ullong_llong(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ullong_llong, FAIL); H5T_CONV_us(ULLONG, LLONG, unsigned long_long, long_long, -, LLONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_float_double * * Purpose: Convert native `float' to native `double' using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Tuesday, June 23, 1998 * * Modifications: * Robb Matzke, 1999-06-16 * Added support for non-zero strides. If BUF_STRIDE is non-zero * then convert one value at each memory location advancing * BUF_STRIDE bytes each time; otherwise assume both source and * destination values are packed. *------------------------------------------------------------------------- */ herr_t H5T_conv_float_double (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_float_double, FAIL); H5T_CONV_fF(FLOAT, DOUBLE, float, double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_float_ldouble * * Purpose: Convert native `float' to native `long double' using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, Feb 25, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_float_ldouble (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_float_ldouble, FAIL); H5T_CONV_fF(FLOAT, LDOUBLE, float, long double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_double_float * * Purpose: Convert native `double' to native `float' using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Robb Matzke * Tuesday, June 23, 1998 * * Modifications: * Robb Matzke, 7 Jul 1998 * Added overflow handling. * * Robb Matzke, 1999-06-16 * Added support for non-zero strides. If BUF_STRIDE is non-zero * then convert one value at each memory location advancing * BUF_STRIDE bytes each time; otherwise assume both source and * destination values are packed. *------------------------------------------------------------------------- */ herr_t H5T_conv_double_float (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_double_float, FAIL); H5T_CONV_Ff(DOUBLE, FLOAT, double, float, -FLT_MAX, FLT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_double_ldouble * * Purpose: Convert native `double' to native `long double' using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, Feb 25, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_double_ldouble (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_double_ldouble, FAIL); H5T_CONV_fF(DOUBLE, LDOUBLE, double, long double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ldouble_float * * Purpose: Convert native `long double' to native `float' using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, Feb 25, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ldouble_float (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ldouble_float, FAIL); H5T_CONV_Ff(LDOUBLE, FLOAT, long double, float, -FLT_MAX, FLT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ldouble_double * * Purpose: Convert native `long double' to native `double' using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, Feb 25, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ldouble_double (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ldouble_double, FAIL); H5T_CONV_Ff(LDOUBLE, DOUBLE, long double, double, -DBL_MAX, DBL_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_schar_float * * Purpose: Convert native signed char to native float using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_schar_float (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_schar_float, FAIL); H5T_CONV_xF(SCHAR, FLOAT, signed char, float, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_schar_double * * Purpose: Convert native signed char to native double using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_schar_double (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_schar_double, FAIL); H5T_CONV_xF(SCHAR, DOUBLE, signed char, double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_schar_ldouble * * Purpose: Convert native signed char to native long double using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_schar_ldouble (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_schar_ldouble, FAIL); H5T_CONV_xF(SCHAR, LDOUBLE, signed char, long double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uchar_float * * Purpose: Convert native unsigned char to native float using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uchar_float (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uchar_float, FAIL); H5T_CONV_xF(UCHAR, FLOAT, unsigned char, float, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uchar_double * * Purpose: Convert native unsigned char to native double using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uchar_double (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uchar_double, FAIL); H5T_CONV_xF(UCHAR, DOUBLE, unsigned char, double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uchar_ldouble * * Purpose: Convert native unsigned char to native long double using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uchar_ldouble (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uchar_ldouble, FAIL); H5T_CONV_xF(UCHAR, LDOUBLE, unsigned char, long double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_short_float * * Purpose: Convert native short to native float using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_short_float (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_short_float, FAIL); H5T_CONV_xF(SHORT, FLOAT, short, float, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_short_double * * Purpose: Convert native short to native double using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_short_double (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_short_double, FAIL); H5T_CONV_xF(SHORT, DOUBLE, short, double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_short_ldouble * * Purpose: Convert native short to native long double using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_short_ldouble (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_short_ldouble, FAIL); H5T_CONV_xF(SHORT, LDOUBLE, short, long double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ushort_float * * Purpose: Convert native unsigned short to native float using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ushort_float (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ushort_float, FAIL); H5T_CONV_xF(USHORT, FLOAT, unsigned short, float, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ushort_double * * Purpose: Convert native unsigned short to native double using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ushort_double (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ushort_double, FAIL); H5T_CONV_xF(USHORT, DOUBLE, unsigned short, double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ushort_ldouble * * Purpose: Convert native unsigned short to native long double using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ushort_ldouble (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ushort_ldouble, FAIL); H5T_CONV_xF(USHORT, LDOUBLE, unsigned short, long double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_int_float * * Purpose: Convert native integer to native float using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_int_float (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_int_float, FAIL); H5T_CONV_xF(INT, FLOAT, int, float, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_int_double * * Purpose: Convert native integer to native double using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_int_double (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_int_double, FAIL); H5T_CONV_xF(INT, DOUBLE, int, double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_int_ldouble * * Purpose: Convert native integer to native long double using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_int_ldouble (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_int_ldouble, FAIL); H5T_CONV_xF(INT, LDOUBLE, int, long double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uint_float * * Purpose: Convert native unsigned integer to native float using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uint_float (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uint_float, FAIL); H5T_CONV_xF(UINT, FLOAT, unsigned int, float, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uint_double * * Purpose: Convert native unsigned integer to native double using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uint_double (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uint_double, FAIL); H5T_CONV_xF(UINT, DOUBLE, unsigned int, double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_uint_ldouble * * Purpose: Convert native unsigned integer to native long double using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_uint_ldouble (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_uint_ldouble, FAIL); H5T_CONV_xF(UINT, LDOUBLE, unsigned int, long double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_long_float * * Purpose: Convert native long to native float using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_long_float (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_long_float, FAIL); H5T_CONV_xF(LONG, FLOAT, long, float, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_long_double * * Purpose: Convert native long to native double using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_long_double (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_long_double, FAIL); H5T_CONV_xF(LONG, DOUBLE, long, double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_long_ldouble * * Purpose: Convert native long to native long double using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_long_ldouble (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_long_ldouble, FAIL); H5T_CONV_xF(LONG, LDOUBLE, long, long double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ulong_float * * Purpose: Convert native unsigned long to native float using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ulong_float (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ulong_float, FAIL); H5T_CONV_xF(ULONG, FLOAT, unsigned long, float, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ulong_double * * Purpose: Convert native unsigned long to native double using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ulong_double (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ulong_double, FAIL); H5T_CONV_xF(ULONG, DOUBLE, unsigned long, double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ulong_ldouble * * Purpose: Convert native unsigned long to native long double using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ulong_ldouble (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ulong_ldouble, FAIL); H5T_CONV_xF(ULONG, LDOUBLE, unsigned long, long double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_llong_float * * Purpose: Convert native long long to native float using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_llong_float (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_llong_float, FAIL); H5T_CONV_xF(LLONG, FLOAT, long_long, float, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_llong_double * * Purpose: Convert native long long to native double using hardware. * This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_llong_double (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_llong_double, FAIL); H5T_CONV_xF(LLONG, DOUBLE, long_long, double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_llong_ldouble * * Purpose: Convert native long long to native long double using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_llong_ldouble (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_llong_ldouble, FAIL); H5T_CONV_xF(LLONG, LDOUBLE, long_long, long double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } #if H5_ULLONG_TO_FP_CAST_WORKS /*------------------------------------------------------------------------- * Function: H5T_conv_ullong_float * * Purpose: Convert native unsigned long long to native float using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ullong_float (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ullong_float, FAIL); H5T_CONV_xF(ULLONG, FLOAT, unsigned long_long, float, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ullong_double * * Purpose: Convert native unsigned long long to native double using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ullong_double (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ullong_double, FAIL); H5T_CONV_xF(ULLONG, DOUBLE, unsigned long_long, double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ullong_ldouble * * Purpose: Convert native unsigned long long to native long double using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ullong_ldouble (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ullong_ldouble, FAIL); H5T_CONV_xF(ULLONG, LDOUBLE, unsigned long_long, long double, -, -); done: FUNC_LEAVE_NOAPI(ret_value); } #endif /*H5_ULLONG_TO_FP_CAST_WORKS*/ /*------------------------------------------------------------------------- * Function: H5T_conv_float_schar * * Purpose: Convert native float to native signed char using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_float_schar (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_float_schar, FAIL); H5T_CONV_Fx(FLOAT, SCHAR, float, signed char, SCHAR_MIN, SCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_float_uchar * * Purpose: Convert native float to native unsigned char using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_float_uchar (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_float_uchar, FAIL); H5T_CONV_Fx(FLOAT, UCHAR, float, unsigned char, 0, UCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_double_schar * * Purpose: Convert native double to native signed char using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_double_schar (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_double_schar, FAIL); H5T_CONV_Fx(DOUBLE, SCHAR, double, signed char, SCHAR_MIN, SCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_double_uchar * * Purpose: Convert native double to native unsigned char using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_double_uchar (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_double_uchar, FAIL); H5T_CONV_Fx(DOUBLE, UCHAR, double, unsigned char, 0, UCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ldouble_schar * * Purpose: Convert native long double to native signed char using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ldouble_schar (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ldouble_schar, FAIL); H5T_CONV_Fx(LDOUBLE, SCHAR, long double, signed char, SCHAR_MIN, SCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ldouble_uchar * * Purpose: Convert native long double to native unsigned char using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ldouble_uchar (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ldouble_uchar, FAIL); H5T_CONV_Fx(LDOUBLE, UCHAR, long double, unsigned char, 0, UCHAR_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_float_short * * Purpose: Convert native float to native short using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_float_short (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_float_short, FAIL); H5T_CONV_Fx(FLOAT, SHORT, float, short, SHRT_MIN, SHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_float_ushort * * Purpose: Convert native float to native unsigned short using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_float_ushort (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_float_ushort, FAIL); H5T_CONV_Fx(FLOAT, USHORT, float, unsigned short, 0, USHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_double_short * * Purpose: Convert native double to native short using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_double_short (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_double_short, FAIL); H5T_CONV_Fx(DOUBLE, SHORT, double, short, SHRT_MIN, SHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_double_ushort * * Purpose: Convert native double to native unsigned short using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_double_ushort (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_double_ushort, FAIL); H5T_CONV_Fx(DOUBLE, USHORT, double, unsigned short, 0, USHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ldouble_short * * Purpose: Convert native long double to native short using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ldouble_short (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ldouble_short, FAIL); H5T_CONV_Fx(LDOUBLE, SHORT, long double, short, SHRT_MIN, SHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ldouble_ushort * * Purpose: Convert native long double to native unsigned short using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ldouble_ushort (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ldouble_ushort, FAIL); H5T_CONV_Fx(LDOUBLE, USHORT, long double, unsigned short, 0, USHRT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_float_int * * Purpose: Convert native float to native int using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_float_int (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_float_int, FAIL); H5T_CONV_Fx(FLOAT, INT, float, int, INT_MIN, INT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_float_uint * * Purpose: Convert native float to native unsigned int using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_float_uint (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_float_uint, FAIL); H5T_CONV_Fx(FLOAT, UINT, float, unsigned int, 0, UINT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_double_int * * Purpose: Convert native double to native int using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_double_int (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_double_int, FAIL); H5T_CONV_Fx(DOUBLE, INT, double, int, INT_MIN, INT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_double_uint * * Purpose: Convert native double to native unsigned int using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_double_uint (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_double_uint, FAIL); H5T_CONV_Fx(DOUBLE, UINT, double, unsigned int, 0, UINT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ldouble_int * * Purpose: Convert native long double to native int using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ldouble_int (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ldouble_int, FAIL); H5T_CONV_Fx(LDOUBLE, INT, long double, int, INT_MIN, INT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ldouble_uint * * Purpose: Convert native long double to native unsigned int using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ldouble_uint (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ldouble_uint, FAIL); H5T_CONV_Fx(LDOUBLE, UINT, long double, unsigned int, 0, UINT_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_float_long * * Purpose: Convert native float to native long using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_float_long (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_float_long, FAIL); H5T_CONV_Fx(FLOAT, LONG, float, long, LONG_MIN, LONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_float_ulong * * Purpose: Convert native float to native unsigned long using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_float_ulong (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_float_ulong, FAIL); H5T_CONV_Fx(FLOAT, ULONG, float, unsigned long, 0, ULONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_double_long * * Purpose: Convert native double to native long using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_double_long (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_double_long, FAIL); H5T_CONV_Fx(DOUBLE, LONG, double, long, LONG_MIN, LONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_double_ulong * * Purpose: Convert native double to native unsigned long using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_double_ulong (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_double_ulong, FAIL); H5T_CONV_Fx(DOUBLE, ULONG, double, unsigned long, 0, ULONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ldouble_long * * Purpose: Convert native long double to native long using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ldouble_long (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ldouble_long, FAIL); H5T_CONV_Fx(LDOUBLE, LONG, long double, long, LONG_MIN, LONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ldouble_ulong * * Purpose: Convert native long double to native unsigned long using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ldouble_ulong (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ldouble_ulong, FAIL); H5T_CONV_Fx(LDOUBLE, ULONG, long double, unsigned long, 0, ULONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_float_llong * * Purpose: Convert native float to native long long using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_float_llong (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_float_llong, FAIL); H5T_CONV_Fx(FLOAT, LLONG, float, long_long, LLONG_MIN, LLONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_float_ullong * * Purpose: Convert native float to native unsigned long long using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_float_ullong (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_float_ullong, FAIL); H5T_CONV_Fx(FLOAT, ULLONG, float, unsigned long_long, 0, ULLONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_double_llong * * Purpose: Convert native double to native long long using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_double_llong (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_double_llong, FAIL); H5T_CONV_Fx(DOUBLE, LLONG, double, long_long, LLONG_MIN, LLONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_double_ullong * * Purpose: Convert native double to native unsigned long long using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, November 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_double_ullong (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_double_ullong, FAIL); H5T_CONV_Fx(DOUBLE, ULLONG, double, unsigned long_long, 0, ULLONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ldouble_llong * * Purpose: Convert native long double to native long long using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ldouble_llong (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ldouble_llong, FAIL); H5T_CONV_Fx(LDOUBLE, LLONG, long double, long_long, LLONG_MIN, LLONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_ldouble_ullong * * Purpose: Convert native long double to native unsigned long long using * hardware. This is a fast special case. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Tuesday, Febuary 1, 2005 * * Modifications: * *------------------------------------------------------------------------- */ herr_t H5T_conv_ldouble_ullong (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t dxpl_id) { herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_ldouble_ullong, FAIL); H5T_CONV_Fx(LDOUBLE, ULLONG, long double, unsigned long_long, 0, ULLONG_MAX); done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_i32le_f64le * * Purpose: Converts 4-byte little-endian integers (signed or unsigned) * to 8-byte litte-endian IEEE floating point. * * Return: Non-negative on success/Negative on failure * * * Programmer: Robb Matzke * Wednesday, June 10, 1998 * * Modifications: * Robb Matzke, 1999-06-16 * Added support for non-zero strides. If BUF_STRIDE is non-zero * then convert one value at each memory location advancing * BUF_STRIDE bytes each time; otherwise assume both source and * destination values are packed. *------------------------------------------------------------------------- */ herr_t H5T_conv_i32le_f64le (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t UNUSED dxpl_id) { uint8_t *s=NULL, *d=NULL; /*src and dst buf pointers */ uint8_t tmp[8]; /*temporary destination buffer */ H5T_t *src = NULL; /*source data type */ size_t elmtno; /*element counter */ unsigned sign; /*sign bit */ unsigned cin, cout; /*carry in/out */ unsigned mbits=0; /*mantissa bits */ unsigned exponent; /*exponent */ int i; /*counter */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_i32le_f64le, FAIL); switch (cdata->command) { case H5T_CONV_INIT: assert (sizeof(int)>=4); cdata->need_bkg = H5T_BKG_NO; break; case H5T_CONV_FREE: /* Free private data */ break; case H5T_CONV_CONV: /* The conversion */ if (NULL==(src=H5I_object(src_id)) || NULL==H5I_object(dst_id)) HGOTO_ERROR (H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); s = (uint8_t*)buf + (buf_stride?buf_stride:4)*(nelmts-1); d = (uint8_t*)buf + (buf_stride?buf_stride:8)*(nelmts-1); for (elmtno=0; elmtnoshared->u.atomic.u.i.sign) { case H5T_SGN_NONE: sign = 0; break; case H5T_SGN_2: if (s[3] & 0x80) { sign = 1; for (i=0,cin=1; i<4; i++,cin=cout) { s[i] = ~s[i]; cout = ((unsigned)(s[i])+cin > 0xff) ? 1 : 0; s[i] += cin; } } else { sign = 0; } break; default: HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unsupported integer sign method"); } /* * Where is the most significant bit that is set? We could do * this in a loop, but testing it this way might be faster. */ if (s[3]) { if (s[3] & 0x80) mbits = 32; else if (s[3] & 0x40) mbits = 31; else if (s[3] & 0x20) mbits = 30; else if (s[3] & 0x10) mbits = 29; else if (s[3] & 0x08) mbits = 28; else if (s[3] & 0x04) mbits = 27; else if (s[3] & 0x02) mbits = 26; else if (s[3] & 0x01) mbits = 25; } else if (s[2]) { if (s[2] & 0x80) mbits = 24; else if (s[2] & 0x40) mbits = 23; else if (s[2] & 0x20) mbits = 22; else if (s[2] & 0x10) mbits = 21; else if (s[2] & 0x08) mbits = 20; else if (s[2] & 0x04) mbits = 19; else if (s[2] & 0x02) mbits = 18; else if (s[2] & 0x01) mbits = 17; } else if (s[1]) { if (s[1] & 0x80) mbits = 16; else if (s[1] & 0x40) mbits = 15; else if (s[1] & 0x20) mbits = 14; else if (s[1] & 0x10) mbits = 13; else if (s[1] & 0x08) mbits = 12; else if (s[1] & 0x04) mbits = 11; else if (s[1] & 0x02) mbits = 10; else if (s[1] & 0x01) mbits = 9; } else if (s[0]) { if (s[0] & 0x80) mbits = 8; else if (s[0] & 0x40) mbits = 7; else if (s[0] & 0x20) mbits = 6; else if (s[0] & 0x10) mbits = 5; else if (s[0] & 0x08) mbits = 4; else if (s[0] & 0x04) mbits = 3; else if (s[0] & 0x02) mbits = 2; else if (s[0] & 0x01) mbits = 1; } else { /*zero*/ d[7] = d[6] = d[5] = d[4] = d[3] = d[2] = d[1] = d[0] = 0; continue; } /* * The sign and exponent. */ exponent = (mbits - 1) + 1023; d[7] = (sign<<7) | ((exponent>>4) & 0x7f); d[6] = (exponent & 0x0f) << 4; /* * The mantissa. */ switch (mbits) { case 32: d[5] = d[4] = d[3] = d[1] = d[0] = 0; break; case 31: d[6] |= 0x0f & (s[3]>>2); d[5] = (s[3]<<6) | (s[2]>>2); d[4] = (s[2]<<6) | (s[1]>>2); d[3] = (s[1]<<6) | (s[0]>>2); d[2] = (s[0]<<6); d[1] = d[0] = 0; break; case 30: d[6] |= 0x0f & (s[3]>>1); d[5] = (s[3]<<7) | (s[2]>>1); d[4] = (s[2]<<7) | (s[1]>>1); d[3] = (s[1]<<7) | (s[0]>>1); d[2] = (s[0]<<7); d[1] = d[0] = 0; break; case 29: d[6] |= 0x0f & s[3]; d[5] = s[2]; d[4] = s[1]; d[3] = s[0]; d[2] = d[1] = d[0] = 0; break; case 28: d[6] |= ((s[3]<<1) | (s[2]>>7)) & 0x0f; d[5] = (s[2]<<1) | (s[1]>>7); d[4] = (s[1]<<1) | (s[0]>>7); d[3] = (s[0]<<1); d[2] = d[1] = d[0] = 0; break; case 27: d[6] |= ((s[3]<<2) | (s[2]>>6)) & 0x0f; d[5] = (s[2]<<2) | (s[1]>>6); d[4] = (s[1]<<2) | (s[0]>>6); d[3] = (s[0]<<2); d[2] = d[1] = d[0] = 0; break; case 26: d[6] |= ((s[3]<<3) | (s[2]>>5)) & 0x0f; d[5] = (s[2]<<3) | (s[1]>>5); d[4] = (s[1]<<3) | (s[0]>>5); d[3] = (s[0]<<3); d[2] = d[1] = d[0] = 0; break; case 25: d[6] |= 0x0f & (s[2]>>4); d[5] = (s[2]<<4) | (s[1]>>4); d[4] = (s[1]<<4) | (s[0]>>4); d[3] = (s[0]<<4); d[2] = d[1] = d[0] = 0; break; case 24: d[6] |= 0x0f & (s[2]>>3); d[5] = (s[2]<<5) | (s[1]>>3); d[4] = (s[1]<<5) | (s[0]>>3); d[3] = (s[0]<<5); d[2] = d[1] = d[0] = 0; break; case 23: d[6] |= 0x0f & (s[2]>>2); d[5] = (s[2]<<6) | (s[1]>>2); d[4] = (s[1]<<6) | (s[0]>>2); d[3] = (s[0]<<6); d[2] = d[1] = d[0] = 0; break; case 22: d[6] |= 0x0f & (s[2]>>1); d[5] = (s[2]<<7) | (s[1]>>1); d[4] = (s[1]<<7) | (s[0]>>1); d[3] = (s[0]<<7); d[2] = d[1] = d[0] = 0; break; case 21: d[6] |= 0x0f & s[2]; d[5] = s[1]; d[4] = s[0]; d[3] = d[2] = d[1] = d[0] = 0; break; case 20: d[6] |= ((s[2]<<1) | (s[1]>>7)) & 0x0f; d[5] = (s[1]<<1) | (s[0]>>7); d[4] = (s[0]<<1); d[3] = d[2] = d[1] = d[0] = 0; break; case 19: d[6] |= ((s[2]<<2) | (s[1]>>6)) & 0x0f; d[5] = (s[1]<<2) | (s[0]>>6); d[4] = (s[0]<<2); d[3] = d[2] = d[1] = d[0] = 0; break; case 18: d[6] |= ((s[2]<<3) | (s[1]>>5)) & 0x0f; d[5] = (s[1]<<3) | (s[0]>>5); d[4] = (s[0]<<3); d[3] = d[2] = d[1] = d[0] = 0; break; case 17: d[6] |= 0x0f & (s[1]>>4); d[5] = (s[1]<<4) | (s[0]>>4); d[4] = (s[0]<<4); d[3] = d[2] = d[1] = d[0] = 0; break; case 16: d[6] |= 0x0f & (s[1]>>3); d[5] = (s[1]<<5) | (s[0]>>3); d[4] = (s[0]<<5); d[3] = d[2] = d[1] = d[0] = 0; break; case 15: d[6] |= 0x0f & (s[1]>>2); d[5] = (s[1]<<6) | (s[0]>>2); d[4] = (s[0]<<6); d[3] = d[2] = d[1] = d[0] = 0; break; case 14: d[6] |= 0x0f & (s[1]>>1); d[5] = (s[1]<<7) | (s[0]>>1); d[4] = (s[0]<<7); d[3] = d[2] = d[1] = d[0] = 0; break; case 13: d[6] |= 0x0f & s[1]; d[5] = s[0]; d[4] = d[3] = d[2] = d[1] = d[0] = 0; break; case 12: d[6] |= ((s[1]<<1) | (s[0]>>7)) & 0x0f; d[5] = (s[0]<<1); d[4] = d[3] = d[2] = d[1] = d[0] = 0; break; case 11: d[6] |= ((s[1]<<2) | (s[0]>>6)) & 0x0f; d[5] = (s[0]<<2); d[4] = d[3] = d[2] = d[1] = d[0] = 0; break; case 10: d[6] |= ((s[1]<<3) | (s[0]>>5)) & 0x0f; d[5] = (s[0]<<3); d[4] = d[3] = d[2] = d[1] = d[0] = 0; break; case 9: d[6] |= 0x0f & (s[0]>>4); d[5] = (s[0]<<4); d[4] = d[3] = d[2] = d[1] = d[0] = 0; break; case 8: d[6] |= 0x0f & (s[0]>>3); d[5] = (s[0]<<5); d[4] = d[3] = d[2] = d[1] = d[0] = 0; break; case 7: d[6] |= 0x0f & (s[0]>>2); d[5] = (s[0]<<6); d[4] = d[3] = d[2] = d[1] = d[0] = 0; break; case 6: d[6] |= 0x0f & (s[0]>>1); d[5] = (s[0]<<7); d[4] = d[3] = d[2] = d[1] = d[0] = 0; break; case 5: d[6] |= 0x0f & s[0]; d[5] = d[4] = d[3] = d[2] = d[1] = d[0] = 0; break; case 4: d[6] |= (s[0]<<1) & 0x0f; d[5] = d[4] = d[3] = d[2] = d[1] = d[0] = 0; break; case 3: d[6] |= (s[0]<<2) & 0x0f; d[5] = d[4] = d[3] = d[2] = d[1] = d[0] = 0; break; case 2: d[6] |= (s[0]<<3) & 0x0f; d[5] = d[4] = d[3] = d[2] = d[1] = d[0] = 0; break; case 1: d[5] = d[4] = d[3] = d[2] = d[1] = d[0] = 0; break; } /* * Copy temp buffer to the destination. This only happens for * the first value in the array, the last value processed. See * beginning of loop. */ if (d==tmp) HDmemcpy (s, d, 8); /* Advance pointers */ if (buf_stride) { s -= buf_stride; d -= buf_stride; } else { s -= 4; d -= 8; } } break; default: /* Some other command we don't know about yet.*/ HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unknown conversion command"); } done: FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_f_i * * Purpose: Convert one floating-point type to an integer. This is * the catch-all function for float-integer conversions and * is probably not particularly fast. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Wednesday, Jan 21, 2004 * * Modifications: * * Raymond Lu * Wednesday, April 21, 2004 * There is a new design for exception handling like overflow, * which is passed in as a transfer property. * *------------------------------------------------------------------------- */ herr_t H5T_conv_f_i (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t dxpl_id) { /* Traversal-related variables */ H5T_t *src_p; /*source data type */ H5T_t *dst_p; /*destination data type */ H5T_atomic_t src; /*atomic source info */ H5T_atomic_t dst; /*atomic destination info */ int direction; /*forward or backward traversal */ size_t elmtno; /*element number */ size_t half_size; /*half the type size */ size_t olap; /*num overlapping elements */ uint8_t *s, *sp, *d, *dp; /*source and dest traversal ptrs*/ uint8_t *src_rev=NULL; /*order-reversed source buffer */ uint8_t dbuf[64]; /*temp destination buffer */ /* Conversion-related variables */ hssize_t expo; /*source exponent */ hssize_t sign; /*source sign bit value */ uint8_t *int_buf=NULL; /*buffer for temporary value */ size_t buf_size; /*buffer size for temporary value */ size_t i; /*miscellaneous counters */ size_t first; /*first bit(MSB) in an integer */ ssize_t sfirst; /*a signed version of `first' */ H5P_genplist_t *plist; /*Property list pointer */ H5T_conv_cb_t cb_struct={NULL, NULL}; /*conversion callback structure */ hbool_t truncated; /*if fraction value is dropped */ hbool_t reverse; /*if reverse order of destination at the end */ H5T_conv_ret_t except_ret; /*return of callback function */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_f_i, FAIL); switch (cdata->command) { case H5T_CONV_INIT: if (NULL==(src_p=H5I_object(src_id)) || NULL==(dst_p=H5I_object(dst_id))) HGOTO_ERROR (H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); src = src_p->shared->u.atomic; dst = dst_p->shared->u.atomic; if (H5T_ORDER_LE!=src.order && H5T_ORDER_BE!=src.order) HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unsupported byte order"); if (dst_p->shared->size>sizeof(dbuf)) HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "destination size is too large"); if (8*sizeof(expo)-1need_bkg = H5T_BKG_NO; break; case H5T_CONV_FREE: break; case H5T_CONV_CONV: /* Get the data types */ if (NULL==(src_p=H5I_object(src_id)) || NULL==(dst_p=H5I_object(dst_id))) HGOTO_ERROR (H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); src = src_p->shared->u.atomic; dst = dst_p->shared->u.atomic; /* * Do we process the values from beginning to end or vice versa? Also, * how many of the elements have the source and destination areas * overlapping? */ if (src_p->shared->size==dst_p->shared->size || buf_stride) { sp = dp = (uint8_t*)buf; direction = 1; olap = nelmts; } else if (src_p->shared->size>=dst_p->shared->size) { double olap_d = HDceil((double)(dst_p->shared->size)/ (double)(src_p->shared->size-dst_p->shared->size)); olap = (size_t)olap_d; sp = dp = (uint8_t*)buf; direction = 1; } else { double olap_d = HDceil((double)(src_p->shared->size)/ (double)(dst_p->shared->size-src_p->shared->size)); olap = (size_t)olap_d; sp = (uint8_t*)buf + (nelmts-1) * src_p->shared->size; dp = (uint8_t*)buf + (nelmts-1) * dst_p->shared->size; direction = -1; } /* Allocate enough space for the buffer holding temporary * converted value */ buf_size = (size_t)HDpow((double)2.0, (double)src.u.f.esize) / 8 + 1; int_buf = (uint8_t*)H5MM_calloc(buf_size); /* Get the plist structure. Do I need to close it? */ if(NULL == (plist = H5P_object_verify(dxpl_id,H5P_DATASET_XFER))) HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find property list for ID"); /* Get conversion exception callback property */ if (H5P_get(plist,H5D_XFER_CONV_CB_NAME,&cb_struct)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "unable to get conversion exception callback"); /* Allocate space for order-reversed source buffer */ src_rev = (uint8_t*)H5MM_calloc(src_p->shared->size); /* The conversion loop */ for (elmtno=0; elmtno0) { s = sp; d = elmtno= nelmts ? dbuf : dp; } #ifndef NDEBUG /* I don't quite trust the overlap calculations yet --rpm */ if (d==dbuf) { assert ((dp>=sp && dpshared->size) || (sp>=dp && spshared->size)); } else { assert ((dpshared->size<=sp) || (spshared->size<=dp)); } #endif /* * Put the data in little endian order so our loops aren't so * complicated. We'll do all the conversion stuff assuming * little endian and then we'll fix the order at the end. */ if (H5T_ORDER_BE==src.order) { half_size = src_p->shared->size/2; for (i=0; ishared->size-(i+1)]; s[src_p->shared->size-(i+1)] = s[i]; s[i] = tmp; } } /*zero-set all destination bits*/ H5T_bit_set (d, dst.offset, dst.prec, FALSE); /* * Find the sign bit value of the source. */ sign = H5T_bit_get_d(s, src.u.f.sign, 1); /* * Check for special cases: +0, -0, +Inf, -Inf, NaN */ if (H5T_bit_find (s, src.u.f.mpos, src.u.f.msize, H5T_BIT_LSB, TRUE)<0) { if (H5T_bit_find (s, src.u.f.epos, src.u.f.esize, H5T_BIT_LSB, TRUE)<0) { /* +0 or -0 */ /* Set all bits to zero */ goto padding; } else if (H5T_bit_find (s, src.u.f.epos, src.u.f.esize, H5T_BIT_LSB, FALSE)<0) { /* +Infinity or -Infinity */ if(sign) { /* -Infinity */ if (H5T_SGN_2==dst.u.i.sign) H5T_bit_set (d, dst.prec-1, 1, TRUE); } else { /* +Infinity */ if (H5T_SGN_NONE==dst.u.i.sign) H5T_bit_set (d, dst.offset, dst.prec, TRUE); else if (H5T_SGN_2==dst.u.i.sign) H5T_bit_set (d, dst.offset, dst.prec-1, TRUE); } goto padding; } } else if (H5T_bit_find (s, src.u.f.epos, src.u.f.esize, H5T_BIT_LSB, FALSE)<0) { /* * NaN. Just set all bits to zero. */ goto padding; } /* * Get the exponent as an unsigned quantity from the section of * the source bit field where it's located. Not expecting * exponent to be greater than the maximal value of hssize_t. */ expo = H5T_bit_get_d(s, src.u.f.epos, src.u.f.esize); /* * Calculate the true source exponent by adjusting according to * the source exponent bias. */ if (0==expo || H5T_NORM_NONE==src.u.f.norm) { expo -= (src.u.f.ebias-1); } else if (H5T_NORM_IMPLIED==src.u.f.norm) { expo -= src.u.f.ebias; } else { assert("normalization method not implemented yet" && 0); HDabort(); } /* * Get the mantissa as bit vector from the section of * the source bit field where it's located. * Keep the little-endian order in the buffer. * A sequence 0x01020304 will be like in the buffer, * 04 03 02 01 * | | | | * V V V V * buf[0] buf[1] buf[2] buf[3] */ H5T_bit_copy(int_buf, 0, s, src.u.f.mpos, src.u.f.msize); /* * Restore the implicit bit for mantissa if it's implied. * Equivalent to mantissa |= (hsize_t)1<shared->size, src_p->shared->u.atomic.order); /*reverse order first*/ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_LOW, src_id, dst_id, src_rev, d, cb_struct.user_data); if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") else if(except_ret == H5T_CONV_HANDLED) /*No need to reverse the order of destination because user handles it*/ reverse = FALSE; } } else { /*source is positive*/ if (first>=dst.prec) { /*overflow*/ if(cb_struct.func) { /*If user's exception handler is present, use it*/ H5T_reverse_order(src_rev, s, src_p->shared->size, src_p->shared->u.atomic.order); /*reverse order first*/ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) H5T_bit_set (d, dst.offset, dst.prec, TRUE); else if(except_ret == H5T_CONV_HANDLED) /*No need to reverse the order of destination because user handles it*/ reverse = FALSE; else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") } else if (first shared->size, src_p->shared->u.atomic.order); /*reverse order first*/ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_TRUNCATE, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) /*copy source value into it if case is ignored by user handler*/ H5T_bit_copy (d, dst.offset, int_buf, 0, first+1); else if(except_ret == H5T_CONV_HANDLED) /*No need to reverse the order of destination because user handles it*/ reverse = FALSE; else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") } } } else if (H5T_SGN_2==dst.u.i.sign) { /*Destination is signed*/ if(sign) { /*source is negative*/ if(first < dst.prec-1) { if(truncated && cb_struct.func) { /*If user's exception handler is present, use it*/ H5T_reverse_order(src_rev, s, src_p->shared->size, src_p->shared->u.atomic.order); /*reverse order first*/ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_TRUNCATE, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) { /*If this case ignored by user handler*/ /*Convert to integer representation. Equivalent to ~(value - 1).*/ H5T_bit_dec(int_buf, 0, 8*buf_size); H5T_bit_neg(int_buf, 0, 8*buf_size); /*copy source value into destination*/ H5T_bit_copy (d, dst.offset, int_buf, 0, dst.prec-1); H5T_bit_set (d, (dst.offset + dst.prec-1), 1, TRUE); } else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") else if(except_ret == H5T_CONV_HANDLED) /*No need to reverse the order of destination because user handles it*/ reverse = FALSE; } else { /* if underflows and no callback, do nothing except turn on * the sign bit because 0x80...00 is the biggest negative value. */ if(cb_struct.func) { /*If user's exception handler is present, use it*/ /*reverse order first*/ H5T_reverse_order(src_rev, s, src_p->shared->size, src_p->shared->u.atomic.order); except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_LOW, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) H5T_bit_set (d, (dst.offset + dst.prec-1), 1, TRUE); else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") else if(except_ret == H5T_CONV_HANDLED) /*No need to reverse the order of destination because user handles it*/ reverse = FALSE; } } else { /*source is positive*/ if (first >= dst.prec-1) { /*overflow*/ if(cb_struct.func) { /*If user's exception handler is present, use it*/ /*reverse order first*/ H5T_reverse_order(src_rev, s, src_p->shared->size, src_p->shared->u.atomic.order); except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) H5T_bit_set (d, dst.offset, dst.prec-1, TRUE); else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") else if(except_ret == H5T_CONV_HANDLED) /*No need to reverse the order of destination because user handles it*/ reverse = FALSE; } else if(first < dst.prec-1) { if(truncated && cb_struct.func) { /*If user's exception handler is present, use it*/ /*reverse order first*/ H5T_reverse_order(src_rev, s, src_p->shared->size, src_p->shared->u.atomic.order); except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_TRUNCATE, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_UNHANDLED) { /*copy source value into it if case is ignored by user handler*/ H5T_bit_copy (d, dst.offset, int_buf, 0, first+1); } else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") else if(except_ret == H5T_CONV_HANDLED) /*No need to reverse the order of destination because user handles it*/ reverse = FALSE; } } } padding: /* * Set padding areas in destination. */ if (dst.offset>0) { assert (H5T_PAD_ZERO==dst.lsb_pad || H5T_PAD_ONE==dst.lsb_pad); H5T_bit_set (d, 0, dst.offset, (hbool_t)(H5T_PAD_ONE==dst.lsb_pad)); } if (dst.offset+dst.prec!=8*dst_p->shared->size) { assert (H5T_PAD_ZERO==dst.msb_pad || H5T_PAD_ONE==dst.msb_pad); H5T_bit_set (d, dst.offset+dst.prec, 8*dst_p->shared->size - (dst.offset+ dst.prec), (hbool_t)(H5T_PAD_ONE==dst.msb_pad)); } /* * Put the destination in the correct byte order. See note at * beginning of loop. */ if (H5T_ORDER_BE==dst.order && reverse) { half_size = dst_p->shared->size/2; for (i=0; ishared->size-(i+1)]; d[dst_p->shared->size-(i+1)] = d[i]; d[i] = tmp; } } /* * If we had used a temporary buffer for the destination then we * should copy the value to the true destination buffer. */ if (d==dbuf) HDmemcpy (dp, d, dst_p->shared->size); if (buf_stride) { sp += direction * buf_stride; dp += direction * buf_stride; } else { sp += direction * src_p->shared->size; dp += direction * dst_p->shared->size; } HDmemset(int_buf, 0, buf_size); } break; default: HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unknown conversion command"); } done: if(int_buf) H5MM_xfree(int_buf); if(src_rev) H5MM_free(src_rev); FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_conv_i_f * * Purpose: Convert one integer type to a floating-point type. This is * the catch-all function for integer-float conversions and * is probably not particularly fast. * * Return: Non-negative on success/Negative on failure * * Programmer: Raymond Lu * Friday, Feb 6, 2004 * * Modifications: * * Raymond Lu * Wednesday, April 21, 2004 * There is a new design for exception handling like overflow, * which is passed in as a transfer property. * *------------------------------------------------------------------------- */ herr_t H5T_conv_i_f (hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts, size_t buf_stride, size_t UNUSED bkg_stride, void *buf, void UNUSED *bkg, hid_t dxpl_id) { /* Traversal-related variables */ H5T_t *src_p; /*source data type */ H5T_t *dst_p; /*destination data type */ H5T_atomic_t src; /*atomic source info */ H5T_atomic_t dst; /*atomic destination info */ int direction; /*forward or backward traversal */ size_t elmtno; /*element number */ size_t half_size; /*half the type size */ size_t olap; /*num overlapping elements */ uint8_t *s, *sp, *d, *dp; /*source and dest traversal ptrs*/ uint8_t *src_rev=NULL; /*order-reversed source buffer */ uint8_t dbuf[64]; /*temp destination buffer */ /* Conversion-related variables */ hsize_t expo; /*destination exponent */ hsize_t expo_max; /*maximal possible exponent value */ size_t sign; /*source sign bit value */ hbool_t is_max_neg; /*source is maximal negative value*/ hbool_t do_round; /*whether there is roundup */ uint8_t *int_buf=NULL; /*buffer for temporary value */ size_t buf_size; /*buffer size for temporary value */ size_t i; /*miscellaneous counters */ size_t first; /*first bit(MSB) in an integer */ ssize_t sfirst; /*a signed version of `first' */ H5P_genplist_t *plist; /*Property list pointer */ H5T_conv_cb_t cb_struct={NULL, NULL}; /*conversion callback structure */ H5T_conv_ret_t except_ret; /*return of callback function */ hbool_t reverse; /*if reverse the order of destination */ herr_t ret_value=SUCCEED; /* Return value */ FUNC_ENTER_NOAPI(H5T_conv_i_f, FAIL); switch (cdata->command) { case H5T_CONV_INIT: if (NULL==(src_p=H5I_object(src_id)) || NULL==(dst_p=H5I_object(dst_id))) HGOTO_ERROR (H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); src = src_p->shared->u.atomic; dst = dst_p->shared->u.atomic; if (H5T_ORDER_LE!=dst.order && H5T_ORDER_BE!=dst.order) HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unsupported byte order"); if (dst_p->shared->size>sizeof(dbuf)) HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "destination size is too large"); if (8*sizeof(expo)-1need_bkg = H5T_BKG_NO; break; case H5T_CONV_FREE: break; case H5T_CONV_CONV: /* Get the data types */ if (NULL==(src_p=H5I_object(src_id)) || NULL==(dst_p=H5I_object(dst_id))) HGOTO_ERROR (H5E_ARGS, H5E_BADTYPE, FAIL, "not a data type"); src = src_p->shared->u.atomic; dst = dst_p->shared->u.atomic; /* * Do we process the values from beginning to end or vice versa? Also, * how many of the elements have the source and destination areas * overlapping? */ if (src_p->shared->size==dst_p->shared->size || buf_stride) { sp = dp = (uint8_t*)buf; direction = 1; olap = nelmts; } else if (src_p->shared->size>=dst_p->shared->size) { double olap_d = HDceil((double)(dst_p->shared->size)/ (double)(src_p->shared->size-dst_p->shared->size)); olap = (size_t)olap_d; sp = dp = (uint8_t*)buf; direction = 1; } else { double olap_d = HDceil((double)(src_p->shared->size)/ (double)(dst_p->shared->size-src_p->shared->size)); olap = (size_t)olap_d; sp = (uint8_t*)buf + (nelmts-1) * src_p->shared->size; dp = (uint8_t*)buf + (nelmts-1) * dst_p->shared->size; direction = -1; } /* Allocate enough space for the buffer holding temporary * converted value */ buf_size = (src.prec > dst.u.f.msize ? src.prec : dst.u.f.msize)/8 + 1; int_buf = (uint8_t*)H5MM_calloc(buf_size); /* Get the plist structure */ if(NULL == (plist = H5P_object_verify(dxpl_id,H5P_DATASET_XFER))) HGOTO_ERROR(H5E_ATOM, H5E_BADATOM, FAIL, "can't find property list for ID"); /* Get conversion exception callback property */ if (H5P_get(plist,H5D_XFER_CONV_CB_NAME,&cb_struct)<0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "unable to get conversion exception callback"); /* Allocate space for order-reversed source buffer */ src_rev = (uint8_t*)H5MM_calloc(src_p->shared->size); /* The conversion loop */ for (elmtno=0; elmtno0) { s = sp; d = elmtno= nelmts ? dbuf : dp; } #ifndef NDEBUG /* I don't quite trust the overlap calculations yet --rpm */ if (d==dbuf) { assert ((dp>=sp && dpshared->size) || (sp>=dp && spshared->size)); } else { assert ((dpshared->size<=sp) || (spshared->size<=dp)); } #endif /* * Put the data in little endian order so our loops aren't so * complicated. We'll do all the conversion stuff assuming * little endian and then we'll fix the order at the end. */ if (H5T_ORDER_BE==src.order) { half_size = src_p->shared->size/2; for (i=0; ishared->size-(i+1)]; s[src_p->shared->size-(i+1)] = s[i]; s[i] = tmp; } } /*zero-set all destination bits*/ H5T_bit_set (d, dst.offset, dst.prec, FALSE); /* Copy source into a temporary buffer */ H5T_bit_copy(int_buf, 0, s, src.offset, src.prec); /* * Find the sign bit value of the source. */ if (H5T_SGN_2 == src.u.i.sign) sign = (size_t)H5T_bit_get_d(int_buf, src.prec-1, 1); /* * What is the bit position(starting from 0 as first one) for the most significant * bit(MSB) of S which is set? */ if(H5T_SGN_2 == src.u.i.sign) { sfirst = H5T_bit_find(int_buf, 0, src.prec-1, H5T_BIT_MSB, TRUE); if(sign && sfirst < 0) /* The case 0x80...00, which is negative with maximal value */ is_max_neg = 1; } else if(H5T_SGN_NONE == src.u.i.sign) sfirst = H5T_bit_find(int_buf, 0, src.prec, H5T_BIT_MSB, TRUE); /* Handle special cases here. Integer is zero */ if(!sign && sfirst < 0) goto padding; /* * Convert source integer if it's negative */ if (H5T_SGN_2 == src.u.i.sign && sign) { if(!is_max_neg) { /* Equivalent to ~(i - 1) */ H5T_bit_dec(int_buf, 0, buf_size*8); H5T_bit_neg(int_buf, 0, buf_size*8); sfirst = H5T_bit_find(int_buf, 0, src.prec-1, H5T_BIT_MSB, TRUE); } else { /* If it's maximal negative number 0x80...000, treat it as if it overflowed * (create a carry) to help conversion. i.e. a character type number 0x80 * is treated as 0x100. */ sfirst = (ssize_t)(src.prec-1); is_max_neg = 0; } /* Sign bit has been negated if bit vector isn't 0x80...00. Set all bits in front of * sign bit to 0 in the temporary buffer because they're all negated from the previous * step. */ H5T_bit_set(int_buf, src.prec, buf_size*8-src.prec, 0); /* Set sign bit in destination */ H5T_bit_set_d(d, dst.u.f.sign, 1, (hsize_t)sign); } first = (size_t)sfirst; /* * Calculate the true destination exponent by adjusting according to * the destination exponent bias. Implied and non-implied normalization * should be the same. */ if (H5T_NORM_NONE==dst.u.f.norm || H5T_NORM_IMPLIED==dst.u.f.norm) { expo = first + dst.u.f.ebias; } else { assert("normalization method not implemented yet" && 0); HDabort(); } /* Handle mantissa part here */ if (H5T_NORM_IMPLIED==dst.u.f.norm) { /* Imply first bit */ H5T_bit_set(int_buf, first, 1, 0); } else if (H5T_NORM_NONE==dst.u.f.norm) { first++; } /* Roundup for mantissa */ if(first > dst.u.f.msize) { /* If the bit sequence is bigger than the mantissa part, there'll be some * precision loss. Let user's handler deal with the case if it's present */ if(cb_struct.func) { H5T_reverse_order(src_rev, s, src_p->shared->size, src_p->shared->u.atomic.order); /*reverse order first*/ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_PRECISION, src_id, dst_id, src_rev, d, cb_struct.user_data); } if(except_ret == H5T_CONV_HANDLED) { reverse = FALSE; goto padding; } else if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") /* If user's exception handler does deal with it, we do it by dropping off the * extra bits at the end and do rounding. If we have .50...0(decimal) after radix * point, we do roundup when the least significant digit before radix is odd, we do * rounddown if it's even. */ /* Check 1st dropoff bit, see if it's set. */ if(H5T_bit_get_d(int_buf, ((first-dst.u.f.msize)-1), 1)) { /* Check all bits after 1st dropoff bit, see if any of them is set. */ if(((first-dst.u.f.msize)-1) > 0 && H5T_bit_get_d(int_buf, 0, ((first-dst.u.f.msize)-1))) do_round = 1; else { /* The .50...0 case */ /* Check if the least significant bit is odd. */ if(H5T_bit_get_d(int_buf, (first-dst.u.f.msize), 1)) do_round = 1; } } /* Right shift to drop off extra bits */ H5T_bit_shift(int_buf, (ssize_t)(dst.u.f.msize-first), 0, buf_size*8); if(do_round) { H5T_bit_inc(int_buf, 0, buf_size*8); do_round = 0; /* If integer is like 0x0ff...fff and we need to round up the * last f, we get 0x100...000. Treat this special case here. */ if(H5T_bit_get_d(int_buf, dst.u.f.msize, 1)) { if (H5T_NORM_IMPLIED==dst.u.f.norm) { /* The bit at this 1's position was impled already, so this * number should be 0x200...000. We need to increment the * exponent in this case. */ expo++; } else if (H5T_NORM_NONE==dst.u.f.norm) { /* Right shift 1 bit to let the carried 1 fit in the mantissa, * and increment exponent by 1. */ H5T_bit_shift(int_buf, -1, 0, buf_size*8); expo++; } } } } else { /* The bit sequence can fit mantissa part. Left shift to fit in from high-order of * bit position. */ H5T_bit_shift(int_buf, (ssize_t)(dst.u.f.msize-first), 0, dst.u.f.msize); } /* Check if the exponent is too big */ expo_max = (hsize_t)HDpow((double)2.0, (double)dst.u.f.esize) - 1; if(expo > expo_max) { /*overflows*/ if(cb_struct.func) { /*user's exception handler. Reverse back source order*/ H5T_reverse_order(src_rev, s, src_p->shared->size, src_p->shared->u.atomic.order); /*reverse order first*/ except_ret = (cb_struct.func)(H5T_CONV_EXCEPT_RANGE_HI, src_id, dst_id, src_rev, d, cb_struct.user_data); if(except_ret == H5T_CONV_ABORT) HGOTO_ERROR(H5E_DATATYPE, H5E_CANTCONVERT, FAIL, "can't handle conversion exception") else if(except_ret == H5T_CONV_HANDLED) { reverse = FALSE; goto padding; } } else { /*make destination infinity by setting exponent to maximal number and *mantissa to zero.*/ expo = expo_max; HDmemset(int_buf, 0, buf_size); } } if(except_ret == H5T_CONV_UNHANDLED) { /* Set exponent in destination */ H5T_bit_set_d(d, dst.u.f.epos, dst.u.f.esize, expo); /* Copy mantissa into destination */ H5T_bit_copy(d, dst.u.f.mpos, int_buf, 0, buf_size*8 > dst.u.f.msize ? dst.u.f.msize : buf_size*8); } padding: /* * Set padding areas in destination. */ if (dst.offset>0) { assert (H5T_PAD_ZERO==dst.lsb_pad || H5T_PAD_ONE==dst.lsb_pad); H5T_bit_set (d, 0, dst.offset, (hbool_t)(H5T_PAD_ONE==dst.lsb_pad)); } if (dst.offset+dst.prec!=8*dst_p->shared->size) { assert (H5T_PAD_ZERO==dst.msb_pad || H5T_PAD_ONE==dst.msb_pad); H5T_bit_set (d, dst.offset+dst.prec, 8*dst_p->shared->size - (dst.offset+ dst.prec), (hbool_t)(H5T_PAD_ONE==dst.msb_pad)); } /* * Put the destination in the correct byte order. See note at * beginning of loop. */ if (H5T_ORDER_BE==dst.order && reverse) { half_size = dst_p->shared->size/2; for (i=0; ishared->size-(i+1)]; d[dst_p->shared->size-(i+1)] = d[i]; d[i] = tmp; } } /* * If we had used a temporary buffer for the destination then we * should copy the value to the true destination buffer. */ if (d==dbuf) HDmemcpy (dp, d, dst_p->shared->size); if (buf_stride) { sp += direction * buf_stride; dp += direction * buf_stride; } else { sp += direction * src_p->shared->size; dp += direction * dst_p->shared->size; } HDmemset(int_buf, 0, buf_size); } break; default: HGOTO_ERROR (H5E_DATATYPE, H5E_UNSUPPORTED, FAIL, "unknown conversion command"); } done: if(int_buf) H5MM_xfree(int_buf); if(src_rev) H5MM_free(src_rev); FUNC_LEAVE_NOAPI(ret_value); } /*------------------------------------------------------------------------- * Function: H5T_reverse_order * * Purpose: Internal assisting function to reverse the order of * a sequence of byte when it's big endian. The byte sequence * simulates the endian order. * * Return: Success: A pointer to the reversed byte sequence * * Failure: Null * * Programmer: Raymond Lu * April 26, 2004 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t H5T_reverse_order(uint8_t *rev, uint8_t *s, size_t size, H5T_order_t order) { size_t i; FUNC_ENTER_NOAPI_NOINIT_NOFUNC(H5T_reverse_order); assert(s); assert(size); if (H5T_ORDER_BE == order) for (i=0; i