# Makefile.in generated by automake 1.6.3 from Makefile.am. # @configure_input@ # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Copyright by the Board of Trustees of the University of Illinois. # All rights reserved. # # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the files COPYING and Copyright.html. COPYING can be found at the root # of the source code distribution tree; Copyright.html can be found at the # root level of an installed copy of the electronic HDF5 document set and # is linked from the top-level documents page. It can also be found at # http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have # access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. # # HDF5 Library Makefile(.in) # #------------------------------------------------------------ -*- makefile -*- # The following section of this makefile comes from the # `./config/commence' file which was generated with config.status # from `./config/commence.in'. #----------------------------------------------------------------------------- #------------------------------------------------------------ -*- makefile -*- # The following section of this makefile comes from the # `./config/conclude' file which was generated with config.status # from `./config/conclude.in'. #----------------------------------------------------------------------------- SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ oldincludedir = /usr/include pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ EXEEXT = @EXEEXT@ OBJEXT = @OBJEXT@ PATH_SEPARATOR = @PATH_SEPARATOR@ # Install directories that automake doesn't know about includedir = $(exec_prefix)/include # Set the paths for autotools to be correct on heping. # Ideally, these tools should never be needed during the build. ACLOCAL = /usr/bin/aclocal AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf AUTOMAKE = /usr/bin/automake AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ AR = @AR@ AS = @AS@ AWK = @AWK@ BUILD_PDB2HDF = @BUILD_PDB2HDF@ BYTESEX = @BYTESEX@ CC = @CC@ CC_VERSION = @CC_VERSION@ CONFIG_DATE = @CONFIG_DATE@ CONFIG_MODE = @CONFIG_MODE@ CONFIG_USER = @CONFIG_USER@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ DEBUG_PKG = @DEBUG_PKG@ DEFAULT_LIBS = @DEFAULT_LIBS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DYNAMIC_DIRS = @DYNAMIC_DIRS@ ECHO = @ECHO@ F77 = @F77@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ FFLAGS = @FFLAGS@ FILTERS = @FILTERS@ FSEARCH_DIRS = @FSEARCH_DIRS@ GASS = @GASS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HDF5_INTERFACES = @HDF5_INTERFACES@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ HSIZET = @HSIZET@ HSIZE_T = @HSIZE_T@ HSSIZE_T = @HSSIZE_T@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LT_STATIC_EXEC = @LT_STATIC_EXEC@ MPE = @MPE@ OBJDUMP = @OBJDUMP@ OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ PACKAGE = @PACKAGE@ PARALLEL = @PARALLEL@ PERL = @PERL@ PTHREAD = @PTHREAD@ RANLIB = @RANLIB@ ROOT = @ROOT@ RUNPARALLEL = @RUNPARALLEL@ RUNSERIAL = @RUNSERIAL@ R_INTEGER = @R_INTEGER@ R_LARGE = @R_LARGE@ SEARCH = @SEARCH@ SETX = @SETX@ SIZE_T = @SIZE_T@ SRB = @SRB@ SSL = @SSL@ STATIC_SHARED = @STATIC_SHARED@ STRIP = @STRIP@ TESTGASS = @TESTGASS@ TESTPARALLEL = @TESTPARALLEL@ TESTSRB = @TESTSRB@ TRACE_API = @TRACE_API@ USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ USE_FILTER_NBIT = @USE_FILTER_NBIT@ USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ USE_FILTER_SZIP = @USE_FILTER_SZIP@ VERSION = @VERSION@ am__include = @am__include@ am__quote = @am__quote@ install_sh = @install_sh@ # Shell commands used in Makefiles RM = rm -f CP = cp # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la LIBH5TEST = $(top_builddir)/test/libh5test.la LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la docdir = $(exec_prefix)/doc # Scripts used to build examples H5CC = $(bindir)/h5cc H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc # Make sure that these variables are exported to the Makefiles F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ ######## Add '-I.' to the C preprocessor flags #AM_CFLAGS=-I$(srcdir) # How to build H5detect for number format detection. # Use -g to force no optimization since many compilers (e.g., Intel) takes # a long time to compile it with any optimization on. H5detect is used # to generate H5Tinit.c once. So, optimization is not critical. noinst_PROGRAMS = H5detect # Our main target, the HDF5 library lib_LTLIBRARIES = libhdf5.la # Temporary files MOSTLYCLEANFILES = H5detect.o H5detect.lo H5detect H5Tinit.o H5Tinit.lo H5Tinit.c # libhdf5.settings is generated during configure. Remove it when distclean. DISTCLEAN = libhdf5.settings # library sources libhdf5_la_SOURCES = H5.c H5A.c H5AC.c H5B.c H5C.c H5D.c H5Dcontig.c H5Dcompact.c \ H5Defl.c H5Dio.c H5Distore.c H5Dmpio.c H5Dselect.c H5Dtest.c H5E.c H5F.c \ H5Fdbg.c H5FD.c H5FDcore.c \ H5FDfamily.c H5FDfphdf5.c H5FDgass.c H5FDlog.c H5FDmpi.c H5FDmpio.c \ H5FDmpiposix.c H5FDmulti.c H5FDsec2.c H5FDsrb.c H5FDstdio.c \ H5FDstream.c H5FL.c H5FO.c H5FP.c H5FPclient.c H5FPserver.c H5FS.c \ H5G.c H5Gent.c H5Gnode.c H5Gstab.c \ H5HG.c H5HGdbg.c H5HL.c H5HLdbg.c H5HP.c H5I.c H5MF.c H5MM.c H5O.c \ H5Oattr.c H5Obogus.c \ H5Ocont.c H5Odtype.c H5Oefl.c H5Ofill.c H5Olayout.c H5Omtime.c \ H5Oname.c H5Onull.c H5Opline.c H5Osdspace.c H5Oshared.c H5Ostab.c \ H5P.c H5Pdcpl.c H5Pdxpl.c H5Pfapl.c H5Pfcpl.c H5Ptest.c H5R.c H5RC.c \ H5RS.c H5S.c H5Sall.c H5Shyper.c H5Smpio.c H5Snone.c H5Spoint.c \ H5Sselect.c H5Stest.c H5SL.c H5ST.c H5T.c H5Tarray.c H5Tbit.c H5Tcommit.c \ H5Tcompound.c H5Tconv.c H5Tcset.c H5Tenum.c H5Tfields.c H5Tfixed.c \ H5Tfloat.c H5Tinit.c H5Tnative.c H5Toffset.c H5Topaque.c H5Torder.c \ H5Tpad.c H5Tprecis.c H5Tstrpad.c H5Tvlen.c H5TS.c H5V.c H5Z.c \ H5Zdeflate.c H5Zfletcher32.c H5Znbit.c H5Zshuffle.c H5Zszip.c \ H5Ztrans.c # Public headers include_HEADERS = H5public.h H5Apublic.h H5ACpublic.h H5Bpublic.h H5Cpublic.h H5Dpublic.h \ H5Epubgen.h H5Epublic.h H5Fpublic.h H5FDpublic.h H5FDcore.h H5FDfamily.h \ H5FDfphdf5.h H5FDgass.h H5FDlog.h H5FDmpi.h H5FDmpio.h H5FDmpiposix.h \ H5FDmulti.h H5FDsec2.h H5FDsrb.h H5FDstdio.h H5FDstream.h H5FPpublic.h \ H5Gpublic.h H5HGpublic.h H5HLpublic.h H5Ipublic.h \ H5MMpublic.h H5Opublic.h H5Ppublic.h H5Rpublic.h H5Spublic.h \ H5Tpublic.h H5Zpublic.h H5pubconf.h hdf5.h H5api_adpt.h # Private headers #noinst_HEADERS =H5private.h H5Aprivate.h H5Apkg.h H5ACprivate.h H5Bprivate.h \ # H5Dprivate.h H5Eprivate.h H5Fprivate.h H5FDprivate.h H5FLprivate.h \ # H5FOprivate.h H5FSprivate.h H5Gprivate.h H5Gpkg.h \ # H5HGprivate.h H5HLprivate.h H5HPprivate.h H5Iprivate.h H5MFprivate.h \ # H5MMprivate.h H5Oprivate.h H5Opkg.h H5Pprivate.h H5Ppkg.h \ # H5Rprivate.h H5RCprivate.h H5RSprivate.h H5Sprivate.h H5STprivate.h \ # H5Tprivate.h H5Tpkg.h H5TSprivate.h H5Vprivate.h \ # H5Zprivate.h H5Zpkg.h H5config.h # install libhdf5.settings in lib directory settingsdir = $(libdir) settings_DATA = libhdf5.settings # Automake needs to be taught how to build lib, progs, and tests targets. # These will be filled in automatically for the most part (e.g., # lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and # EXTRA_TEST variables are supplied to allow the user to force targets to # be built at certain times. LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) subdir = src mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs CONFIG_HEADER = H5config.h CONFIG_CLEAN_FILES = libhdf5.settings LTLIBRARIES = $(lib_LTLIBRARIES) libhdf5_la_LDFLAGS = libhdf5_la_LIBADD = am_libhdf5_la_OBJECTS = H5.lo H5A.lo H5AC.lo H5B.lo H5C.lo H5D.lo \ H5Dcontig.lo H5Dcompact.lo H5Defl.lo H5Dio.lo H5Distore.lo \ H5Dmpio.lo H5Dselect.lo H5Dtest.lo H5E.lo H5F.lo H5Fdbg.lo \ H5FD.lo H5FDcore.lo H5FDfamily.lo H5FDfphdf5.lo H5FDgass.lo \ H5FDlog.lo H5FDmpi.lo H5FDmpio.lo H5FDmpiposix.lo H5FDmulti.lo \ H5FDsec2.lo H5FDsrb.lo H5FDstdio.lo H5FDstream.lo H5FL.lo \ H5FO.lo H5FP.lo H5FPclient.lo H5FPserver.lo H5FS.lo H5G.lo \ H5Gent.lo H5Gnode.lo H5Gstab.lo H5HG.lo H5HGdbg.lo H5HL.lo \ H5HLdbg.lo H5HP.lo H5I.lo H5MF.lo H5MM.lo H5O.lo H5Oattr.lo \ H5Obogus.lo H5Ocont.lo H5Odtype.lo H5Oefl.lo H5Ofill.lo \ H5Olayout.lo H5Omtime.lo H5Oname.lo H5Onull.lo H5Opline.lo \ H5Osdspace.lo H5Oshared.lo H5Ostab.lo H5P.lo H5Pdcpl.lo \ H5Pdxpl.lo H5Pfapl.lo H5Pfcpl.lo H5Ptest.lo H5R.lo H5RC.lo \ H5RS.lo H5S.lo H5Sall.lo H5Shyper.lo H5Smpio.lo H5Snone.lo \ H5Spoint.lo H5Sselect.lo H5Stest.lo H5SL.lo H5ST.lo H5T.lo \ H5Tarray.lo H5Tbit.lo H5Tcommit.lo H5Tcompound.lo H5Tconv.lo \ H5Tcset.lo H5Tenum.lo H5Tfields.lo H5Tfixed.lo H5Tfloat.lo \ H5Tinit.lo H5Tnative.lo H5Toffset.lo H5Topaque.lo H5Torder.lo \ H5Tpad.lo H5Tprecis.lo H5Tstrpad.lo H5Tvlen.lo H5TS.lo H5V.lo \ H5Z.lo H5Zdeflate.lo H5Zfletcher32.lo H5Znbit.lo H5Zshuffle.lo \ H5Zszip.lo H5Ztrans.lo libhdf5_la_OBJECTS = $(am_libhdf5_la_OBJECTS) noinst_PROGRAMS = H5detect$(EXEEXT) PROGRAMS = $(noinst_PROGRAMS) H5detect_SOURCES = H5detect.c H5detect_OBJECTS = H5detect.$(OBJEXT) H5detect_LDADD = $(LDADD) H5detect_DEPENDENCIES = H5detect_LDFLAGS = DEFS = @DEFS@ DEFAULT_INCLUDES = -I. -I$(srcdir) -I. LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles @AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/H5.Plo ./$(DEPDIR)/H5A.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5AC.Plo ./$(DEPDIR)/H5B.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5C.Plo ./$(DEPDIR)/H5D.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Dcompact.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Dcontig.Plo ./$(DEPDIR)/H5Defl.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Dio.Plo ./$(DEPDIR)/H5Distore.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Dmpio.Plo ./$(DEPDIR)/H5Dselect.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Dtest.Plo ./$(DEPDIR)/H5E.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5F.Plo ./$(DEPDIR)/H5FD.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5FDcore.Plo ./$(DEPDIR)/H5FDfamily.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5FDfphdf5.Plo ./$(DEPDIR)/H5FDgass.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5FDlog.Plo ./$(DEPDIR)/H5FDmpi.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5FDmpio.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5FDmpiposix.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5FDmulti.Plo ./$(DEPDIR)/H5FDsec2.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5FDsrb.Plo ./$(DEPDIR)/H5FDstdio.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5FDstream.Plo ./$(DEPDIR)/H5FL.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5FO.Plo ./$(DEPDIR)/H5FP.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5FPclient.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5FPserver.Plo ./$(DEPDIR)/H5FS.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Fdbg.Plo ./$(DEPDIR)/H5G.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Gent.Plo ./$(DEPDIR)/H5Gnode.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Gstab.Plo ./$(DEPDIR)/H5HG.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5HGdbg.Plo ./$(DEPDIR)/H5HL.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5HLdbg.Plo ./$(DEPDIR)/H5HP.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5I.Plo ./$(DEPDIR)/H5MF.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5MM.Plo ./$(DEPDIR)/H5O.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Oattr.Plo ./$(DEPDIR)/H5Obogus.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Ocont.Plo ./$(DEPDIR)/H5Odtype.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Oefl.Plo ./$(DEPDIR)/H5Ofill.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Olayout.Plo ./$(DEPDIR)/H5Omtime.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Oname.Plo ./$(DEPDIR)/H5Onull.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Opline.Plo ./$(DEPDIR)/H5Osdspace.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Oshared.Plo ./$(DEPDIR)/H5Ostab.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5P.Plo ./$(DEPDIR)/H5Pdcpl.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Pdxpl.Plo ./$(DEPDIR)/H5Pfapl.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Pfcpl.Plo ./$(DEPDIR)/H5Ptest.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5R.Plo ./$(DEPDIR)/H5RC.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5RS.Plo ./$(DEPDIR)/H5S.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5SL.Plo ./$(DEPDIR)/H5ST.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Sall.Plo ./$(DEPDIR)/H5Shyper.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Smpio.Plo ./$(DEPDIR)/H5Snone.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Spoint.Plo ./$(DEPDIR)/H5Sselect.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Stest.Plo ./$(DEPDIR)/H5T.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5TS.Plo ./$(DEPDIR)/H5Tarray.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Tbit.Plo ./$(DEPDIR)/H5Tcommit.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Tcompound.Plo ./$(DEPDIR)/H5Tconv.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Tcset.Plo ./$(DEPDIR)/H5Tenum.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Tfields.Plo ./$(DEPDIR)/H5Tfixed.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Tfloat.Plo ./$(DEPDIR)/H5Tinit.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Tnative.Plo ./$(DEPDIR)/H5Toffset.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Topaque.Plo ./$(DEPDIR)/H5Torder.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Tpad.Plo ./$(DEPDIR)/H5Tprecis.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Tstrpad.Plo ./$(DEPDIR)/H5Tvlen.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5V.Plo ./$(DEPDIR)/H5Z.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Zdeflate.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Zfletcher32.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Znbit.Plo ./$(DEPDIR)/H5Zshuffle.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Zszip.Plo ./$(DEPDIR)/H5Ztrans.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5detect.Po COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ CFLAGS = @CFLAGS@ DIST_SOURCES = $(libhdf5_la_SOURCES) H5detect.c DATA = $(settings_DATA) HEADERS = $(include_HEADERS) DIST_COMMON = $(include_HEADERS) H5config.h.in Makefile.am Makefile.in \ libhdf5.settings.in SOURCES = $(libhdf5_la_SOURCES) H5detect.c all: H5config.h $(MAKE) $(AM_MAKEFLAGS) all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && \ $(AUTOMAKE) --foreign src/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) H5config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/H5config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status src/H5config.h $(srcdir)/H5config.h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOHEADER) touch $(srcdir)/H5config.h.in distclean-hdr: -rm -f H5config.h stamp-h1 libhdf5.settings: $(top_builddir)/config.status libhdf5.settings.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ libLTLIBRARIES_INSTALL = $(INSTALL) install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(libdir) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \ else :; fi; \ done uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ p="`echo $$p | sed -e 's|^.*/||'`"; \ echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \ $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test -z "$dir" && dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libhdf5.la: $(libhdf5_la_OBJECTS) $(libhdf5_la_DEPENDENCIES) $(LINK) -rpath $(libdir) $(libhdf5_la_LDFLAGS) $(libhdf5_la_OBJECTS) $(libhdf5_la_LIBADD) $(LIBS) clean-noinstPROGRAMS: @list='$(noinst_PROGRAMS)'; for p in $$list; do \ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ echo " rm -f $$p $$f"; \ rm -f $$p $$f ; \ done H5detect$(EXEEXT): $(H5detect_OBJECTS) $(H5detect_DEPENDENCIES) @rm -f H5detect$(EXEEXT) $(LINK) $(H5detect_LDFLAGS) $(H5detect_OBJECTS) $(H5detect_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) core *.core distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5A.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5AC.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5B.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5C.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5D.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Dcompact.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Dcontig.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Defl.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Dio.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Distore.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Dmpio.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Dselect.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Dtest.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5E.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5F.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FD.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FDcore.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FDfamily.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FDfphdf5.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FDgass.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FDlog.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FDmpi.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FDmpio.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FDmpiposix.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FDmulti.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FDsec2.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FDsrb.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FDstdio.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FDstream.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FL.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FO.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FP.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FPclient.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FPserver.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FS.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Fdbg.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5G.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Gent.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Gnode.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Gstab.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5HG.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5HGdbg.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5HL.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5HLdbg.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5HP.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5I.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5MF.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5MM.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5O.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Oattr.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Obogus.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Ocont.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Odtype.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Oefl.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Ofill.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Olayout.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Omtime.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Oname.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Onull.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Opline.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Osdspace.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Oshared.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Ostab.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5P.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Pdcpl.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Pdxpl.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Pfapl.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Pfcpl.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Ptest.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5R.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5RC.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5RS.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5S.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5SL.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5ST.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Sall.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Shyper.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Smpio.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Snone.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Spoint.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Sselect.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Stest.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5T.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5TS.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tarray.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tbit.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tcommit.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tcompound.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tconv.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tcset.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tenum.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tfields.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tfixed.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tfloat.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tinit.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tnative.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Toffset.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Topaque.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Torder.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tpad.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tprecis.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tstrpad.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Tvlen.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5V.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Z.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Zdeflate.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Zfletcher32.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Znbit.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Zshuffle.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Zszip.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Ztrans.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5detect.Po@am__quote@ distclean-depend: -rm -rf ./$(DEPDIR) .c.o: @AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ @AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< .c.obj: @AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ @AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ $(COMPILE) -c `cygpath -w $<` .c.lo: @AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ @AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< CCDEPMODE = @CCDEPMODE@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: settingsDATA_INSTALL = $(INSTALL_DATA) install-settingsDATA: $(settings_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(settingsdir) @list='$(settings_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " $(settingsDATA_INSTALL) $$d$$p $(DESTDIR)$(settingsdir)/$$f"; \ $(settingsDATA_INSTALL) $$d$$p $(DESTDIR)$(settingsdir)/$$f; \ done uninstall-settingsDATA: @$(NORMAL_UNINSTALL) @list='$(settings_DATA)'; for p in $$list; do \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " rm -f $(DESTDIR)$(settingsdir)/$$f"; \ rm -f $(DESTDIR)$(settingsdir)/$$f; \ done includeHEADERS_INSTALL = $(INSTALL_HEADER) install-includeHEADERS: $(include_HEADERS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(includedir) @list='$(include_HEADERS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f"; \ $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f; \ done uninstall-includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_HEADERS)'; for p in $$list; do \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " rm -f $(DESTDIR)$(includedir)/$$f"; \ rm -f $(DESTDIR)$(includedir)/$$f; \ done ETAGS = etags ETAGSFLAGS = tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique TAGS: $(HEADERS) $(SOURCES) H5config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) H5config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$tags$$unique" \ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) top_distdir = .. distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) @list='$(DISTFILES)'; for file in $$list; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkinstalldirs) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-am all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(DATA) $(HEADERS) \ H5config.h all-local installdirs: $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(settingsdir) $(DESTDIR)$(includedir) install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ clean-noinstPROGRAMS mostlyclean-am distclean: distclean-am distclean-am: clean-am distclean-compile distclean-depend \ distclean-generic distclean-hdr distclean-libtool \ distclean-tags dvi: dvi-am dvi-am: info: info-am info-am: install-data-am: install-includeHEADERS install-settingsDATA install-exec-am: install-libLTLIBRARIES install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool uninstall-am: uninstall-includeHEADERS uninstall-info-am \ uninstall-libLTLIBRARIES uninstall-settingsDATA .PHONY: GTAGS all all-am all-local check check-TESTS check-am clean \ clean-generic clean-libLTLIBRARIES clean-libtool \ clean-noinstPROGRAMS distclean distclean-compile \ distclean-depend distclean-generic distclean-hdr \ distclean-libtool distclean-tags distdir dvi dvi-am info \ info-am install install-am install-data install-data-am \ install-exec install-exec-am install-includeHEADERS \ install-info install-info-am install-libLTLIBRARIES install-man \ install-settingsDATA install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool tags uninstall uninstall-am \ uninstall-includeHEADERS uninstall-info-am \ uninstall-libLTLIBRARIES uninstall-settingsDATA # Error header generation # # Actually, H5Einit.h, H5Eterm.h, H5Edefin.h and H5Epubgen.h all # depend on H5err.txt, but the perl script generates them all, so just # list one here. $(top_srcdir)/src/H5Edefin.h: $(top_srcdir)/src/H5err.txt perl $(top_srcdir)/bin/make_err $> # Number format detection # The LD_LIBRARY_PATH setting is a klutch. # Things should have been all set during H5detect making. # Remove the generated .c file if errors occur unless HDF5_Make_Ignore # is set to ignore the error. H5Tinit.c: H5detect LD_LIBRARY_PATH="$$LD_LIBRARY_PATH`echo $(LDFLAGS) | \ sed -e 's/-L/:/g' -e 's/ //g'`" \ $(RUNSERIAL) ./H5detect > H5Tinit.c || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ ($(RM) $@ ; exit 1) # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) build-tests: $(LIB) $(PROGS) $(TESTS) lib progs tests :: @$(MAKE) build-$@ || exit 1; \ for d in X $(SUBDIRS); do \ if test $$d != X -a $$d != .; then \ (set -x; cd $$d && $(MAKE) $@) || exit 1; \ fi; \ done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. install-doc uninstall-doc: @echo "Nothing to be done." # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # # Note that targets in TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test test _test: $(PROGS) $(TESTS) @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @for test in $(TEST_PROG) dummy; do \ if test $$test != dummy; then \ echo "============================"; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ else \ echo "Testing $$test $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ srcdir="$(srcdir)" \ $(RUNTEST) ./$$test $(TEST_FLAGS) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ break; \ echo ""; \ fi; \ done; \ test $$test = dummy || false @if test -n "$(TEST_PROG_PARA)"; then \ echo "**** Hint ****"; \ echo "Parallel test files reside in the current directory" \ "by default."; \ echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ echo " HDF5_PARAPREFIX=/PFS/user/me"; \ echo " export HDF5_PARAPREFIX"; \ echo " make check"; \ echo "**** end of Hint ****"; \ fi @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ echo "============================"; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ else \ echo "Testing $$test $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ srcdir="$(srcdir)" \ $(RUNPARALLEL) ./$$test $(TEST_FLAGS) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ break; \ echo ""; \ fi; \ done; \ test $$test = dummy || false @for test in $(TEST_SCRIPT) dummy; do \ if test $$test != dummy; then \ echo "============================"; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ else \ echo "Testing $$test $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ /bin/sh $$test $(TEST_FLAGS) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ break; \ echo ""; \ fi; \ done; \ test $$test = dummy || false @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi # Run test with different Virtual File Driver check-vfd: @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ echo "Testing Virtual File Driver $$vfd"; \ echo "============================"; \ HDF5_DRIVER=$$vfd $(MAKE) check; \ fi; \ done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: