# Makefile.in generated by automake 1.9.5 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5.  The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html.  COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page.  It can also be found at
# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
#
# HDF5 Library Test Makefile(.in)
#
SOURCES = $(libh5test_la_SOURCES) b+tree.c big.c bittests.c blocktrack.c btree2.c cache.c cmpd_dset.c dangle.c dsets.c dt_arith.c dtransform.c dtypes.c enum.c err_compat.c error_test.c extend.c external.c fillval.c flush1.c flush2.c getname.c gheap.c hyperslab.c istore.c lheap.c links.c mount.c mtime.c ntypes.c ohdr.c pool.c reserved.c set_extent.c sheap.c stab.c stream_test.c $(testhdf5_SOURCES) testmeta.c $(ttsafe_SOURCES) unlink.c vfd.c

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(top_srcdir)/config/commence.am \
	$(top_srcdir)/config/conclude.am
check_PROGRAMS = $(am__EXEEXT_1) error_test$(EXEEXT) \
	err_compat$(EXEEXT) testmeta$(EXEEXT)
subdir = test
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/H5config.h
CONFIG_CLEAN_FILES =
am__DEPENDENCIES_1 = $(top_builddir)/src/libhdf5.la
libh5test_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
am_libh5test_la_OBJECTS = h5test.lo testframe.lo
libh5test_la_OBJECTS = $(am_libh5test_la_OBJECTS)
am__EXEEXT_1 = testhdf5$(EXEEXT) lheap$(EXEEXT) ohdr$(EXEEXT) \
	stab$(EXEEXT) gheap$(EXEEXT) btree2$(EXEEXT) cache$(EXEEXT) \
	b+tree$(EXEEXT) blocktrack$(EXEEXT) sheap$(EXEEXT) \
	pool$(EXEEXT) hyperslab$(EXEEXT) istore$(EXEEXT) \
	bittests$(EXEEXT) dt_arith$(EXEEXT) dtypes$(EXEEXT) \
	dsets$(EXEEXT) cmpd_dset$(EXEEXT) extend$(EXEEXT) \
	external$(EXEEXT) links$(EXEEXT) unlink$(EXEEXT) big$(EXEEXT) \
	mtime$(EXEEXT) fillval$(EXEEXT) mount$(EXEEXT) flush1$(EXEEXT) \
	flush2$(EXEEXT) enum$(EXEEXT) set_extent$(EXEEXT) \
	ttsafe$(EXEEXT) stream_test$(EXEEXT) getname$(EXEEXT) \
	vfd$(EXEEXT) ntypes$(EXEEXT) dangle$(EXEEXT) \
	dtransform$(EXEEXT) reserved$(EXEEXT)
b_tree_SOURCES = b+tree.c
b_tree_OBJECTS = b+tree.$(OBJEXT)
b_tree_LDADD = $(LDADD)
b_tree_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
big_SOURCES = big.c
big_OBJECTS = big.$(OBJEXT)
big_LDADD = $(LDADD)
big_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
bittests_SOURCES = bittests.c
bittests_OBJECTS = bittests.$(OBJEXT)
bittests_LDADD = $(LDADD)
bittests_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
blocktrack_SOURCES = blocktrack.c
blocktrack_OBJECTS = blocktrack.$(OBJEXT)
blocktrack_LDADD = $(LDADD)
blocktrack_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
btree2_SOURCES = btree2.c
btree2_OBJECTS = btree2.$(OBJEXT)
btree2_LDADD = $(LDADD)
btree2_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
cache_SOURCES = cache.c
cache_OBJECTS = cache.$(OBJEXT)
cache_LDADD = $(LDADD)
cache_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
cmpd_dset_SOURCES = cmpd_dset.c
cmpd_dset_OBJECTS = cmpd_dset.$(OBJEXT)
cmpd_dset_LDADD = $(LDADD)
cmpd_dset_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
dangle_SOURCES = dangle.c
dangle_OBJECTS = dangle.$(OBJEXT)
dangle_LDADD = $(LDADD)
dangle_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
dsets_SOURCES = dsets.c
dsets_OBJECTS = dsets.$(OBJEXT)
dsets_LDADD = $(LDADD)
dsets_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
dt_arith_SOURCES = dt_arith.c
dt_arith_OBJECTS = dt_arith.$(OBJEXT)
dt_arith_LDADD = $(LDADD)
dt_arith_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
dtransform_SOURCES = dtransform.c
dtransform_OBJECTS = dtransform.$(OBJEXT)
dtransform_LDADD = $(LDADD)
dtransform_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
dtypes_SOURCES = dtypes.c
dtypes_OBJECTS = dtypes.$(OBJEXT)
dtypes_LDADD = $(LDADD)
dtypes_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
enum_SOURCES = enum.c
enum_OBJECTS = enum.$(OBJEXT)
enum_LDADD = $(LDADD)
enum_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
err_compat_SOURCES = err_compat.c
err_compat_OBJECTS = err_compat.$(OBJEXT)
err_compat_LDADD = $(LDADD)
err_compat_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
error_test_SOURCES = error_test.c
error_test_OBJECTS = error_test.$(OBJEXT)
error_test_LDADD = $(LDADD)
error_test_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
extend_SOURCES = extend.c
extend_OBJECTS = extend.$(OBJEXT)
extend_LDADD = $(LDADD)
extend_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
external_SOURCES = external.c
external_OBJECTS = external.$(OBJEXT)
external_LDADD = $(LDADD)
external_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
fillval_SOURCES = fillval.c
fillval_OBJECTS = fillval.$(OBJEXT)
fillval_LDADD = $(LDADD)
fillval_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
flush1_SOURCES = flush1.c
flush1_OBJECTS = flush1.$(OBJEXT)
flush1_LDADD = $(LDADD)
flush1_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
flush2_SOURCES = flush2.c
flush2_OBJECTS = flush2.$(OBJEXT)
flush2_LDADD = $(LDADD)
flush2_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
getname_SOURCES = getname.c
getname_OBJECTS = getname.$(OBJEXT)
getname_LDADD = $(LDADD)
getname_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
gheap_SOURCES = gheap.c
gheap_OBJECTS = gheap.$(OBJEXT)
gheap_LDADD = $(LDADD)
gheap_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
hyperslab_SOURCES = hyperslab.c
hyperslab_OBJECTS = hyperslab.$(OBJEXT)
hyperslab_LDADD = $(LDADD)
hyperslab_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
istore_SOURCES = istore.c
istore_OBJECTS = istore.$(OBJEXT)
istore_LDADD = $(LDADD)
istore_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
lheap_SOURCES = lheap.c
lheap_OBJECTS = lheap.$(OBJEXT)
lheap_LDADD = $(LDADD)
lheap_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
links_SOURCES = links.c
links_OBJECTS = links.$(OBJEXT)
links_LDADD = $(LDADD)
links_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
mount_SOURCES = mount.c
mount_OBJECTS = mount.$(OBJEXT)
mount_LDADD = $(LDADD)
mount_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
mtime_SOURCES = mtime.c
mtime_OBJECTS = mtime.$(OBJEXT)
mtime_LDADD = $(LDADD)
mtime_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
ntypes_SOURCES = ntypes.c
ntypes_OBJECTS = ntypes.$(OBJEXT)
ntypes_LDADD = $(LDADD)
ntypes_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
ohdr_SOURCES = ohdr.c
ohdr_OBJECTS = ohdr.$(OBJEXT)
ohdr_LDADD = $(LDADD)
ohdr_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
pool_SOURCES = pool.c
pool_OBJECTS = pool.$(OBJEXT)
pool_LDADD = $(LDADD)
pool_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
reserved_SOURCES = reserved.c
reserved_OBJECTS = reserved.$(OBJEXT)
reserved_LDADD = $(LDADD)
reserved_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
set_extent_SOURCES = set_extent.c
set_extent_OBJECTS = set_extent.$(OBJEXT)
set_extent_LDADD = $(LDADD)
set_extent_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
sheap_SOURCES = sheap.c
sheap_OBJECTS = sheap.$(OBJEXT)
sheap_LDADD = $(LDADD)
sheap_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
stab_SOURCES = stab.c
stab_OBJECTS = stab.$(OBJEXT)
stab_LDADD = $(LDADD)
stab_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
stream_test_SOURCES = stream_test.c
stream_test_OBJECTS = stream_test.$(OBJEXT)
stream_test_LDADD = $(LDADD)
stream_test_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
am_testhdf5_OBJECTS = testhdf5.$(OBJEXT) tarray.$(OBJEXT) \
	tattr.$(OBJEXT) tconfig.$(OBJEXT) tfile.$(OBJEXT) \
	tgenprop.$(OBJEXT) th5s.$(OBJEXT) theap.$(OBJEXT) \
	tid.$(OBJEXT) titerate.$(OBJEXT) tmeta.$(OBJEXT) \
	tmisc.$(OBJEXT) ttime.$(OBJEXT) trefer.$(OBJEXT) \
	trefstr.$(OBJEXT) tselect.$(OBJEXT) tskiplist.$(OBJEXT) \
	ttst.$(OBJEXT) tunicode.$(OBJEXT) tvltypes.$(OBJEXT) \
	tvlstr.$(OBJEXT)
testhdf5_OBJECTS = $(am_testhdf5_OBJECTS)
testhdf5_LDADD = $(LDADD)
testhdf5_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
testmeta_SOURCES = testmeta.c
testmeta_OBJECTS = testmeta.$(OBJEXT)
testmeta_LDADD = $(LDADD)
testmeta_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
am_ttsafe_OBJECTS = ttsafe.$(OBJEXT) ttsafe_dcreate.$(OBJEXT) \
	ttsafe_error.$(OBJEXT) ttsafe_cancel.$(OBJEXT) \
	ttsafe_acreate.$(OBJEXT)
ttsafe_OBJECTS = $(am_ttsafe_OBJECTS)
ttsafe_LDADD = $(LDADD)
ttsafe_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
unlink_SOURCES = unlink.c
unlink_OBJECTS = unlink.$(OBJEXT)
unlink_LDADD = $(LDADD)
unlink_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
vfd_SOURCES = vfd.c
vfd_OBJECTS = vfd.$(OBJEXT)
vfd_LDADD = $(LDADD)
vfd_DEPENDENCIES = libh5test.la $(am__DEPENDENCIES_1)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src
depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(libh5test_la_SOURCES) b+tree.c big.c bittests.c \
	blocktrack.c btree2.c cache.c cmpd_dset.c dangle.c dsets.c \
	dt_arith.c dtransform.c dtypes.c enum.c err_compat.c \
	error_test.c extend.c external.c fillval.c flush1.c flush2.c \
	getname.c gheap.c hyperslab.c istore.c lheap.c links.c mount.c \
	mtime.c ntypes.c ohdr.c pool.c reserved.c set_extent.c sheap.c \
	stab.c stream_test.c $(testhdf5_SOURCES) testmeta.c \
	$(ttsafe_SOURCES) unlink.c vfd.c
DIST_SOURCES = $(libh5test_la_SOURCES) b+tree.c big.c bittests.c \
	blocktrack.c btree2.c cache.c cmpd_dset.c dangle.c dsets.c \
	dt_arith.c dtransform.c dtypes.c enum.c err_compat.c \
	error_test.c extend.c external.c fillval.c flush1.c flush2.c \
	getname.c gheap.c hyperslab.c istore.c lheap.c links.c mount.c \
	mtime.c ntypes.c ohdr.c pool.c reserved.c set_extent.c sheap.c \
	stab.c stream_test.c $(testhdf5_SOURCES) testmeta.c \
	$(ttsafe_SOURCES) unlink.c vfd.c
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
BUILD_FORTRAN_CONDITIONAL_FALSE = @BUILD_FORTRAN_CONDITIONAL_FALSE@
BUILD_FORTRAN_CONDITIONAL_TRUE = @BUILD_FORTRAN_CONDITIONAL_TRUE@
BUILD_HDF5_HL_CONDITIONAL_FALSE = @BUILD_HDF5_HL_CONDITIONAL_FALSE@
BUILD_HDF5_HL_CONDITIONAL_TRUE = @BUILD_HDF5_HL_CONDITIONAL_TRUE@
BUILD_PABLO_CONDITIONAL_FALSE = @BUILD_PABLO_CONDITIONAL_FALSE@
BUILD_PABLO_CONDITIONAL_TRUE = @BUILD_PABLO_CONDITIONAL_TRUE@
BUILD_PARALLEL_CONDITIONAL_FALSE = @BUILD_PARALLEL_CONDITIONAL_FALSE@
BUILD_PARALLEL_CONDITIONAL_TRUE = @BUILD_PARALLEL_CONDITIONAL_TRUE@
BUILD_PDB2HDF = @BUILD_PDB2HDF@
BUILD_PDB2HDF_CONDITIONAL_FALSE = @BUILD_PDB2HDF_CONDITIONAL_FALSE@
BUILD_PDB2HDF_CONDITIONAL_TRUE = @BUILD_PDB2HDF_CONDITIONAL_TRUE@
BYTESEX = @BYTESEX@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_VERSION = @CC_VERSION@
CFLAGS = @CFLAGS@
CONFIG_DATE = @CONFIG_DATE@
CONFIG_MODE = @CONFIG_MODE@
CONFIG_USER = @CONFIG_USER@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_PKG = @DEBUG_PKG@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_DIRS = @DYNAMIC_DIRS@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
F77 = @F77@

# Make sure that these variables are exported to the Makefiles
F9XMODEXT = @F9XMODEXT@
F9XMODFLAG = @F9XMODFLAG@
F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
FC = @FC@
FCFLAGS = @FCFLAGS@
FCLIBS = @FCLIBS@
FFLAGS = @FFLAGS@
FILTERS = @FILTERS@
FSEARCH_DIRS = @FSEARCH_DIRS@
H5_VERSION = @H5_VERSION@
HADDR_T = @HADDR_T@
HDF5_INTERFACES = @HDF5_INTERFACES@
HID_T = @HID_T@
HL = @HL@
HL_FOR = @HL_FOR@
HSIZET = @HSIZET@
HSIZE_T = @HSIZE_T@
HSSIZE_T = @HSSIZE_T@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_STATIC_EXEC = @LT_STATIC_EXEC@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
MPE = @MPE@
OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PARALLEL = @PARALLEL@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PTHREAD = @PTHREAD@
RANLIB = @RANLIB@
ROOT = @ROOT@
RUNPARALLEL = @RUNPARALLEL@
RUNSERIAL = @RUNSERIAL@
R_INTEGER = @R_INTEGER@
R_LARGE = @R_LARGE@
SEARCH = @SEARCH@
SETX = @SETX@
SET_MAKE = @SET_MAKE@

# Hardcode SHELL to be /bin/sh.  Most machines have this shell, and
# on at least one machine configure fails to detect its existence (janus).
# Also, when HDF5 is configured on one machine but run on another,
# configure's automatic SHELL detection may not work on the build machine.
SHELL = /bin/sh
SIZE_T = @SIZE_T@
STATIC_SHARED = @STATIC_SHARED@
STRIP = @STRIP@
TESTPARALLEL = @TESTPARALLEL@
TRACE_API = @TRACE_API@
USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
USE_FILTER_NBIT = @USE_FILTER_NBIT@
USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@
USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
USE_FILTER_SZIP = @USE_FILTER_SZIP@
VERSION = @VERSION@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
ac_ct_FC = @ac_ct_FC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@

# Install directories that automake doesn't know about
includedir = $(exec_prefix)/include
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@

# Shell commands used in Makefiles
RM = rm -f
CP = cp

# Some machines need a command to run executables; this is that command
# so that our tests will run.
# We use RUNTESTS instead of RUNSERIAL directly because it may be that
# some tests need to be run with a different command.  Older versions
# of the makefiles used the command
# $(LIBTOOL) --mode=execute
# in some directories, for instance.
RUNTESTS = $(RUNSERIAL)

# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
docdir = $(exec_prefix)/doc

# Scripts used to build examples
H5CC = $(bindir)/h5cc
H5CC_PP = $(bindir)/h5pcc
H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc

# .chkexe and .chksh files are used to mark tests that have run successfully.
# Serial tests create .log and .logsh files.  It's important only to clean log
# files generated by HDF5's tests, because the .log suffix is used for
# other files (e.g., config.log)!
# On the other hand, it is very hard to specify the exact name of .chksh and
# .logsh files because some scripts live in the source tree, not the build
# tree.  Thus, we clean all .logsh and .chksh files.

# Temporary files.  These files are the ones created by setting the
# HDF5_NOCLEANUP environment variable and running `make test' without
# specifying a file prefix or low-level driver.  Changing the file
# prefix or low-level driver with environment variables will influence 
# the temporary file name in ways that the makefile is not aware of.
CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \
	$(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \
	$(TEST_PROG_CHKEXE:.chkexe_=.log) \
	$(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) *.chksh *.logsh \
	cmpd_dset.h5 compact_dataset.h5 dataset.h5 extend.h5 istore.h5 \
	tfile[1-4].h5 th5s[1-3].h5 lheap.h5 ohdr.h5 stab[1-2].h5 \
	extern_[1-3].h5 extern_[1-4][ab].raw gheap[0-4].h5 \
	dt_arith[1-2] links.h5 links[1-3].h5 big.data \
	big[0-9][0-9][0-9][0-9][0-9].h5 dtypes[1-8].h5 \
	dt_arith[1-2].h5 tattr.h5 tselect.h5 mtime.h5 unlink.h5 \
	unicode.h5 fillval_[0-9].h5 fillval.raw mount_[0-9].h5 \
	testmeta.h5 ttime.h5 trefer[1-3].h5 tvltypes.h5 tvlstr.h5 \
	tvlstr2.h5 flush.h5 enum1.h5 titerate.h5 ttsafe.h5 tarray1.h5 \
	tgenprop.h5 tmisc[0-9]*.h5 set_extent_read.h5 \
	set_extent_create.h5 getname.h5 getname[1-3].h5 sec2_file.h5 \
	family_file000[0-3][0-9].h5 multi_file-[rs].h5 core_file \
	new_move_[ab].h5 ntypes.h5 dangle.h5 error_test.h5 \
	err_compat.h5 dtransform.h5 test_filters.h5 get_file_name.h5 \
	tstint[1-2].h5 unlink_chunked.h5 btree2.h5 blocktrack.h5 \
	sheap.h5 b+tree.h5
INCLUDES = -I$(top_srcdir)/src -I$(top_builddir)/src

# Test script for error_test and err_compat
TEST_SCRIPT = $(top_srcdir)/test/testerror.sh
check_SCRIPTS = $(TEST_SCRIPT)

# These are our main targets. They should be listed in the order to be
# executed, generally most specific tests to least specific tests.
# As an exception, long-running tests should occur earlier in the list.
# This gives them more time to run when tests are executing in parallel.
TEST_PROG = testhdf5 lheap ohdr stab gheap btree2 cache b+tree blocktrack sheap \
           pool hyperslab istore bittests dt_arith \
           dtypes dsets cmpd_dset extend external links unlink big mtime     \
           fillval mount flush1 flush2 enum \
           set_extent ttsafe stream_test \
           getname vfd ntypes dangle dtransform reserved 


# The libh5test library provides common support code for the tests.
check_LTLIBRARIES = libh5test.la
libh5test_la_SOURCES = h5test.c testframe.c
libh5test_la_LIBADD = $(LIBHDF5)

# Build the library statically because some compilers can only link
# one dynamic library and the main hdf5 library is much larger than this
# one.
libh5test_la_LDFLAGS = -static

# Use libhd5test.la to compile all of the tests
LDADD = libh5test.la $(LIBHDF5)

# List the source files for tests that have more than one
ttsafe_SOURCES = ttsafe.c ttsafe_dcreate.c ttsafe_error.c ttsafe_cancel.c       \
               ttsafe_acreate.c


# Sources for testhdf5 executable
testhdf5_SOURCES = testhdf5.c tarray.c tattr.c tconfig.c tfile.c tgenprop.c \
    th5s.c theap.c tid.c titerate.c tmeta.c tmisc.c ttime.c trefer.c trefstr.c  \
    tselect.c tskiplist.c ttst.c tunicode.c tvltypes.c tvlstr.c


# Automake needs to be taught how to build lib, progs, and tests targets.
# These will be filled in automatically for the most part (e.g.,
# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
# EXTRA_TEST variables are supplied to allow the user to force targets to
# be built at certain times. 
LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)

PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
        $(EXTRA_PROG)

TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_)
TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_)
all: all-am

.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  test/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  test/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

clean-checkLTLIBRARIES:
	-test -z "$(check_LTLIBRARIES)" || rm -f $(check_LTLIBRARIES)
	@list='$(check_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
libh5test.la: $(libh5test_la_OBJECTS) $(libh5test_la_DEPENDENCIES) 
	$(LINK)  $(libh5test_la_LDFLAGS) $(libh5test_la_OBJECTS) $(libh5test_la_LIBADD) $(LIBS)

clean-checkPROGRAMS:
	@list='$(check_PROGRAMS)'; for p in $$list; do \
	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  echo " rm -f $$p $$f"; \
	  rm -f $$p $$f ; \
	done
b+tree$(EXEEXT): $(b_tree_OBJECTS) $(b_tree_DEPENDENCIES) 
	@rm -f b+tree$(EXEEXT)
	$(LINK) $(b_tree_LDFLAGS) $(b_tree_OBJECTS) $(b_tree_LDADD) $(LIBS)
big$(EXEEXT): $(big_OBJECTS) $(big_DEPENDENCIES) 
	@rm -f big$(EXEEXT)
	$(LINK) $(big_LDFLAGS) $(big_OBJECTS) $(big_LDADD) $(LIBS)
bittests$(EXEEXT): $(bittests_OBJECTS) $(bittests_DEPENDENCIES) 
	@rm -f bittests$(EXEEXT)
	$(LINK) $(bittests_LDFLAGS) $(bittests_OBJECTS) $(bittests_LDADD) $(LIBS)
blocktrack$(EXEEXT): $(blocktrack_OBJECTS) $(blocktrack_DEPENDENCIES) 
	@rm -f blocktrack$(EXEEXT)
	$(LINK) $(blocktrack_LDFLAGS) $(blocktrack_OBJECTS) $(blocktrack_LDADD) $(LIBS)
btree2$(EXEEXT): $(btree2_OBJECTS) $(btree2_DEPENDENCIES) 
	@rm -f btree2$(EXEEXT)
	$(LINK) $(btree2_LDFLAGS) $(btree2_OBJECTS) $(btree2_LDADD) $(LIBS)
cache$(EXEEXT): $(cache_OBJECTS) $(cache_DEPENDENCIES) 
	@rm -f cache$(EXEEXT)
	$(LINK) $(cache_LDFLAGS) $(cache_OBJECTS) $(cache_LDADD) $(LIBS)
cmpd_dset$(EXEEXT): $(cmpd_dset_OBJECTS) $(cmpd_dset_DEPENDENCIES) 
	@rm -f cmpd_dset$(EXEEXT)
	$(LINK) $(cmpd_dset_LDFLAGS) $(cmpd_dset_OBJECTS) $(cmpd_dset_LDADD) $(LIBS)
dangle$(EXEEXT): $(dangle_OBJECTS) $(dangle_DEPENDENCIES) 
	@rm -f dangle$(EXEEXT)
	$(LINK) $(dangle_LDFLAGS) $(dangle_OBJECTS) $(dangle_LDADD) $(LIBS)
dsets$(EXEEXT): $(dsets_OBJECTS) $(dsets_DEPENDENCIES) 
	@rm -f dsets$(EXEEXT)
	$(LINK) $(dsets_LDFLAGS) $(dsets_OBJECTS) $(dsets_LDADD) $(LIBS)
dt_arith$(EXEEXT): $(dt_arith_OBJECTS) $(dt_arith_DEPENDENCIES) 
	@rm -f dt_arith$(EXEEXT)
	$(LINK) $(dt_arith_LDFLAGS) $(dt_arith_OBJECTS) $(dt_arith_LDADD) $(LIBS)
dtransform$(EXEEXT): $(dtransform_OBJECTS) $(dtransform_DEPENDENCIES) 
	@rm -f dtransform$(EXEEXT)
	$(LINK) $(dtransform_LDFLAGS) $(dtransform_OBJECTS) $(dtransform_LDADD) $(LIBS)
dtypes$(EXEEXT): $(dtypes_OBJECTS) $(dtypes_DEPENDENCIES) 
	@rm -f dtypes$(EXEEXT)
	$(LINK) $(dtypes_LDFLAGS) $(dtypes_OBJECTS) $(dtypes_LDADD) $(LIBS)
enum$(EXEEXT): $(enum_OBJECTS) $(enum_DEPENDENCIES) 
	@rm -f enum$(EXEEXT)
	$(LINK) $(enum_LDFLAGS) $(enum_OBJECTS) $(enum_LDADD) $(LIBS)
err_compat$(EXEEXT): $(err_compat_OBJECTS) $(err_compat_DEPENDENCIES) 
	@rm -f err_compat$(EXEEXT)
	$(LINK) $(err_compat_LDFLAGS) $(err_compat_OBJECTS) $(err_compat_LDADD) $(LIBS)
error_test$(EXEEXT): $(error_test_OBJECTS) $(error_test_DEPENDENCIES) 
	@rm -f error_test$(EXEEXT)
	$(LINK) $(error_test_LDFLAGS) $(error_test_OBJECTS) $(error_test_LDADD) $(LIBS)
extend$(EXEEXT): $(extend_OBJECTS) $(extend_DEPENDENCIES) 
	@rm -f extend$(EXEEXT)
	$(LINK) $(extend_LDFLAGS) $(extend_OBJECTS) $(extend_LDADD) $(LIBS)
external$(EXEEXT): $(external_OBJECTS) $(external_DEPENDENCIES) 
	@rm -f external$(EXEEXT)
	$(LINK) $(external_LDFLAGS) $(external_OBJECTS) $(external_LDADD) $(LIBS)
fillval$(EXEEXT): $(fillval_OBJECTS) $(fillval_DEPENDENCIES) 
	@rm -f fillval$(EXEEXT)
	$(LINK) $(fillval_LDFLAGS) $(fillval_OBJECTS) $(fillval_LDADD) $(LIBS)
flush1$(EXEEXT): $(flush1_OBJECTS) $(flush1_DEPENDENCIES) 
	@rm -f flush1$(EXEEXT)
	$(LINK) $(flush1_LDFLAGS) $(flush1_OBJECTS) $(flush1_LDADD) $(LIBS)
flush2$(EXEEXT): $(flush2_OBJECTS) $(flush2_DEPENDENCIES) 
	@rm -f flush2$(EXEEXT)
	$(LINK) $(flush2_LDFLAGS) $(flush2_OBJECTS) $(flush2_LDADD) $(LIBS)
getname$(EXEEXT): $(getname_OBJECTS) $(getname_DEPENDENCIES) 
	@rm -f getname$(EXEEXT)
	$(LINK) $(getname_LDFLAGS) $(getname_OBJECTS) $(getname_LDADD) $(LIBS)
gheap$(EXEEXT): $(gheap_OBJECTS) $(gheap_DEPENDENCIES) 
	@rm -f gheap$(EXEEXT)
	$(LINK) $(gheap_LDFLAGS) $(gheap_OBJECTS) $(gheap_LDADD) $(LIBS)
hyperslab$(EXEEXT): $(hyperslab_OBJECTS) $(hyperslab_DEPENDENCIES) 
	@rm -f hyperslab$(EXEEXT)
	$(LINK) $(hyperslab_LDFLAGS) $(hyperslab_OBJECTS) $(hyperslab_LDADD) $(LIBS)
istore$(EXEEXT): $(istore_OBJECTS) $(istore_DEPENDENCIES) 
	@rm -f istore$(EXEEXT)
	$(LINK) $(istore_LDFLAGS) $(istore_OBJECTS) $(istore_LDADD) $(LIBS)
lheap$(EXEEXT): $(lheap_OBJECTS) $(lheap_DEPENDENCIES) 
	@rm -f lheap$(EXEEXT)
	$(LINK) $(lheap_LDFLAGS) $(lheap_OBJECTS) $(lheap_LDADD) $(LIBS)
links$(EXEEXT): $(links_OBJECTS) $(links_DEPENDENCIES) 
	@rm -f links$(EXEEXT)
	$(LINK) $(links_LDFLAGS) $(links_OBJECTS) $(links_LDADD) $(LIBS)
mount$(EXEEXT): $(mount_OBJECTS) $(mount_DEPENDENCIES) 
	@rm -f mount$(EXEEXT)
	$(LINK) $(mount_LDFLAGS) $(mount_OBJECTS) $(mount_LDADD) $(LIBS)
mtime$(EXEEXT): $(mtime_OBJECTS) $(mtime_DEPENDENCIES) 
	@rm -f mtime$(EXEEXT)
	$(LINK) $(mtime_LDFLAGS) $(mtime_OBJECTS) $(mtime_LDADD) $(LIBS)
ntypes$(EXEEXT): $(ntypes_OBJECTS) $(ntypes_DEPENDENCIES) 
	@rm -f ntypes$(EXEEXT)
	$(LINK) $(ntypes_LDFLAGS) $(ntypes_OBJECTS) $(ntypes_LDADD) $(LIBS)
ohdr$(EXEEXT): $(ohdr_OBJECTS) $(ohdr_DEPENDENCIES) 
	@rm -f ohdr$(EXEEXT)
	$(LINK) $(ohdr_LDFLAGS) $(ohdr_OBJECTS) $(ohdr_LDADD) $(LIBS)
pool$(EXEEXT): $(pool_OBJECTS) $(pool_DEPENDENCIES) 
	@rm -f pool$(EXEEXT)
	$(LINK) $(pool_LDFLAGS) $(pool_OBJECTS) $(pool_LDADD) $(LIBS)
reserved$(EXEEXT): $(reserved_OBJECTS) $(reserved_DEPENDENCIES) 
	@rm -f reserved$(EXEEXT)
	$(LINK) $(reserved_LDFLAGS) $(reserved_OBJECTS) $(reserved_LDADD) $(LIBS)
set_extent$(EXEEXT): $(set_extent_OBJECTS) $(set_extent_DEPENDENCIES) 
	@rm -f set_extent$(EXEEXT)
	$(LINK) $(set_extent_LDFLAGS) $(set_extent_OBJECTS) $(set_extent_LDADD) $(LIBS)
sheap$(EXEEXT): $(sheap_OBJECTS) $(sheap_DEPENDENCIES) 
	@rm -f sheap$(EXEEXT)
	$(LINK) $(sheap_LDFLAGS) $(sheap_OBJECTS) $(sheap_LDADD) $(LIBS)
stab$(EXEEXT): $(stab_OBJECTS) $(stab_DEPENDENCIES) 
	@rm -f stab$(EXEEXT)
	$(LINK) $(stab_LDFLAGS) $(stab_OBJECTS) $(stab_LDADD) $(LIBS)
stream_test$(EXEEXT): $(stream_test_OBJECTS) $(stream_test_DEPENDENCIES) 
	@rm -f stream_test$(EXEEXT)
	$(LINK) $(stream_test_LDFLAGS) $(stream_test_OBJECTS) $(stream_test_LDADD) $(LIBS)
testhdf5$(EXEEXT): $(testhdf5_OBJECTS) $(testhdf5_DEPENDENCIES) 
	@rm -f testhdf5$(EXEEXT)
	$(LINK) $(testhdf5_LDFLAGS) $(testhdf5_OBJECTS) $(testhdf5_LDADD) $(LIBS)
testmeta$(EXEEXT): $(testmeta_OBJECTS) $(testmeta_DEPENDENCIES) 
	@rm -f testmeta$(EXEEXT)
	$(LINK) $(testmeta_LDFLAGS) $(testmeta_OBJECTS) $(testmeta_LDADD) $(LIBS)
ttsafe$(EXEEXT): $(ttsafe_OBJECTS) $(ttsafe_DEPENDENCIES) 
	@rm -f ttsafe$(EXEEXT)
	$(LINK) $(ttsafe_LDFLAGS) $(ttsafe_OBJECTS) $(ttsafe_LDADD) $(LIBS)
unlink$(EXEEXT): $(unlink_OBJECTS) $(unlink_DEPENDENCIES) 
	@rm -f unlink$(EXEEXT)
	$(LINK) $(unlink_LDFLAGS) $(unlink_OBJECTS) $(unlink_LDADD) $(LIBS)
vfd$(EXEEXT): $(vfd_OBJECTS) $(vfd_DEPENDENCIES) 
	@rm -f vfd$(EXEEXT)
	$(LINK) $(vfd_LDFLAGS) $(vfd_OBJECTS) $(vfd_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/b+tree.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/big.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bittests.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/blocktrack.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/btree2.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cache.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cmpd_dset.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dangle.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dsets.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dt_arith.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dtransform.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dtypes.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/enum.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/err_compat.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/error_test.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/extend.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/external.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fillval.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flush1.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flush2.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getname.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gheap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5test.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hyperslab.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/istore.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lheap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/links.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mount.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mtime.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ntypes.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ohdr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pool.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reserved.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/set_extent.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sheap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stab.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stream_test.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tarray.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tattr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tconfig.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testframe.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testhdf5.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testmeta.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tfile.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tgenprop.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/th5s.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/theap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tid.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/titerate.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tmeta.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tmisc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trefer.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trefstr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tselect.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tskiplist.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttime.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_acreate.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_cancel.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_dcreate.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_error.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttst.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tunicode.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tvlstr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tvltypes.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/unlink.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vfd.Po@am__quote@

.c.o:
@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c $<

.c.obj:
@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(mkdir_p) $(distdir)/../config
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_LTLIBRARIES) $(check_PROGRAMS) \
	  $(check_SCRIPTS)
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile all-local
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-checkLTLIBRARIES clean-checkPROGRAMS clean-generic \
	clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-libtool distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am:

install-exec-am:

install-info: install-info-am

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool mostlyclean-local

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-info-am

.PHONY: CTAGS GTAGS all all-am all-local check check-TESTS check-am \
	clean clean-checkLTLIBRARIES clean-checkPROGRAMS clean-generic \
	clean-libtool ctags distclean distclean-compile \
	distclean-generic distclean-libtool distclean-tags distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-exec install-exec-am \
	install-info install-info-am install-man install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
	pdf-am ps ps-am tags uninstall uninstall-am uninstall-info-am


# check-install is a synonym for installcheck.
# Add this build rule here (rather than in conclude.am, where build rules
# normally go) because it should be included in the top-level Makefile.am
# as well.
check-install: installcheck

# Additional target for running timing test
timings _timings: testmeta
	@for timing in $(TIMINGS) dummy; do                                   \
	   if test $$timing != dummy; then                                    \
	      echo "Running $$timing $(TEST_FLAGS)";                          \
	      $(RUNTEST) ./$$timing $(TEST_FLAGS) || exit 1;                  \
	   fi;                                                                \
	done;

# The flush1 test must run before the flush2 test
flush2.chkexe_: flush1.chkexe_

# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
# BUILT_SOURCES contain targets that need to be built before anything else
# in the directory (e.g., Fortran type detection)
build-lib: $(BUILT_SOURCES) $(LIB)
build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)

lib progs tests check-s check-p check-clean ::
	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
	@for d in X $(SUBDIRS); do                                             \
	    if test $$d != X && test $$d != .; then                           \
	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
	    fi;                                                               \
	done

# Tell Automake to build tests when the user types `make all' (this is
# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
# Automake won't build them automatically, either.
all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)

# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
# UPDATE: docs no longer reside in this build tree, so this target
# is depreciated.
install-doc uninstall-doc:
	@echo "Nothing to be done."

# clean up files generated by tests so they can be re-run.
build-check-clean:
	$(RM) $(CHECK_CLEANFILES)

# run check-clean whenever mostlyclean is run
mostlyclean-local: build-check-clean

# Run each test in order, passing $(TEST_FLAGS) to the program.
# Since tests are done in a shell loop, "make -i" does apply inside it.
# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
# The timestamps give a rough idea how much time the tests use.
#
# Note that targets in TESTS (defined above) will be built when the user
# types 'make tests' or 'make check', but only programs in TEST_PROG,
# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
check-TESTS: test

test _test:
	@$(MAKE) build-check-s
	@$(MAKE) build-check-p

# Actual execution of check-s.
build-check-s: $(LIB) $(PROGS) $(TESTS)
	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
	fi
	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
	fi

_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
	@for d in dummy $(TEST_PROG_CHKEXE:.chkexe_=.log)            \
	          $(TEST_SCRIPT_CHKSH:.chksh_=.logsh); do            \
	   if test $$d != dummy && test $$d != .log &&               \
	                           test $$d != .logsh; then          \
	      cat `basename $$d`;                                    \
	   fi;                                                       \
	done

# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
# $${log} is the log file.
# $${tname} is the name of test.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
	   tname=$(@:.chkexe_=)$(EXEEXT);\
	   log=$(@:.chkexe_=.log); \
	   echo "============================"; \
	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
	      echo "No need to test $${tname} again."; \
	   else \
	      echo "============================" > $${log}; \
	      if test "X$(HDF_FORTRAN)" = "Xyes"; then \
	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
	      elif test "X$(HDF_CXX)" = "Xyes"; then \
	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
	      else \
	         echo "Testing $${tname} $(TEST_FLAGS)"; \
	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
	      fi; \
	      echo "============================" >> $${log}; \
	      srcdir="$(srcdir)" \
	         $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
	         && touch $(@:.chkexe_=.chkexe) || \
	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
	         (cat $${log} && false) || exit 1; \
	      echo "" >> $${log}; \
	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
	      echo "============================" >> $${log}; \
	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
	   fi; \
	   echo "============================"; \
	fi

# The dummy.chksh here prevents the target from being
# empty if there are no tests in the current directory.
# $${log} is the log file.
# $${tname} is the name of test.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_:
	@if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \
	   tname=`basename $(@:.chksh_=)`;\
	   log=`basename $(@:.chksh_=.logsh)`; \
	   echo "============================"; \
	   if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \
	      echo "No need to test $${tname} again."; \
	   else \
	      echo "============================" > $${log}; \
	      if test "X$(HDF_FORTRAN)" = "Xyes"; then \
	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
	      elif test "X$(HDF_CXX)" = "Xyes"; then \
	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
	      else \
	         echo "Testing $${tname} $(TEST_FLAGS)"; \
	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
	      fi; \
	      echo "============================" >> $${log}; \
	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
	      srcdir="$(srcdir)" \
	         $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \
	         && touch `basename $(@:.chksh_=.chksh)` || \
	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
	         (cat $${log} && false) || exit 1; \
	      echo "" >> $${log}; \
	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
	      echo "============================" >> $${log}; \
	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
	   fi; \
	   echo "============================"; \
	fi

# Actual execution of check-p.
build-check-p: $(LIB) $(PROGS) $(TESTS)
	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
	fi
	@if test -n "$(TEST_PROG_PARA)"; then                                \
	    echo "**** Hint ****";                                            \
	    echo "Parallel test files reside in the current directory"        \
	         "by default.";                                               \
	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
	    echo "    export HDF5_PARAPREFIX";                                \
	    echo "    make check";                                            \
	    echo "**** end of Hint ****";                                     \
	fi
	@for test in $(TEST_PROG_PARA) dummy; do                             \
	   if test $$test != dummy; then                                      \
	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
	      RUNTESTS="$(RUNPARALLEL)"; \
	   fi;                                                                \
	done;                                                                 \
	test $$test = dummy || false
	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
	  if test $$test != dummy; then                                      \
	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
	  fi;                                                                 \
	done;                                                                 \
	test $$test = dummy || false
	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
	fi

# Run test with different Virtual File Driver
check-vfd:
	@for vfd in $(VFD_LIST) dummy; do                                     \
	    if test $$vfd != dummy; then                                      \
	        echo "============================";                          \
	        echo "Testing Virtual File Driver $$vfd";                     \
	        echo "============================";                          \
	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check;              \
	    fi;                                                               \
	done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: