# Makefile.in generated by automake 1.6.3 from Makefile.am. # @configure_input@ # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Copyright by the Board of Trustees of the University of Illinois. # All rights reserved. # # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the files COPYING and Copyright.html. COPYING can be found at the root # of the source code distribution tree; Copyright.html can be found at the # root level of an installed copy of the electronic HDF5 document set and # is linked from the top-level documents page. It can also be found at # http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have # access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. # # HDF5 Library Test Makefile(.in) # #------------------------------------------------------------ -*- makefile -*- # The following section of this makefile comes from the # `./config/commence' file which was generated with config.status # from `./config/commence.in'. #----------------------------------------------------------------------------- #------------------------------------------------------------ -*- makefile -*- # The following section of this makefile comes from the # `./config/conclude' file which was generated with config.status # from `./config/conclude.in'. #----------------------------------------------------------------------------- SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ oldincludedir = /usr/include pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ EXEEXT = @EXEEXT@ OBJEXT = @OBJEXT@ PATH_SEPARATOR = @PATH_SEPARATOR@ # Install directories that automake doesn't know about includedir = $(exec_prefix)/include ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ AR = @AR@ AS = @AS@ AWK = @AWK@ BUILD_PDB2HDF = @BUILD_PDB2HDF@ BYTESEX = @BYTESEX@ CC = @CC@ CC_VERSION = @CC_VERSION@ CONFIG_DATE = @CONFIG_DATE@ CONFIG_MODE = @CONFIG_MODE@ CONFIG_USER = @CONFIG_USER@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ DEBUG_PKG = @DEBUG_PKG@ DEFAULT_LIBS = @DEFAULT_LIBS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DYNAMIC_DIRS = @DYNAMIC_DIRS@ ECHO = @ECHO@ F77 = @F77@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ FFLAGS = @FFLAGS@ FILTERS = @FILTERS@ FSEARCH_DIRS = @FSEARCH_DIRS@ GASS = @GASS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HDF5_INTERFACES = @HDF5_INTERFACES@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ HSIZET = @HSIZET@ HSIZE_T = @HSIZE_T@ HSSIZE_T = @HSSIZE_T@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LT_STATIC_EXEC = @LT_STATIC_EXEC@ MPE = @MPE@ OBJDUMP = @OBJDUMP@ OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ PACKAGE = @PACKAGE@ PARALLEL = @PARALLEL@ PERL = @PERL@ PTHREAD = @PTHREAD@ RANLIB = @RANLIB@ ROOT = @ROOT@ RUNPARALLEL = @RUNPARALLEL@ RUNSERIAL = @RUNSERIAL@ R_INTEGER = @R_INTEGER@ R_LARGE = @R_LARGE@ SEARCH = @SEARCH@ SETX = @SETX@ SIZE_T = @SIZE_T@ SRB = @SRB@ SSL = @SSL@ STATIC_SHARED = @STATIC_SHARED@ STRIP = @STRIP@ TESTGASS = @TESTGASS@ TESTPARALLEL = @TESTPARALLEL@ TESTSRB = @TESTSRB@ TRACE_API = @TRACE_API@ USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ USE_FILTER_NBIT = @USE_FILTER_NBIT@ USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ USE_FILTER_SZIP = @USE_FILTER_SZIP@ VERSION = @VERSION@ am__include = @am__include@ am__quote = @am__quote@ install_sh = @install_sh@ # Shell commands used in Makefiles RM = rm -f CP = cp # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la LIBH5TEST = $(top_builddir)/test/libh5test.la LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la docdir = $(exec_prefix)/doc # Scripts used to build examples H5CC = $(bindir)/h5cc H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc # Make sure that these variables are exported to the Makefiles F9XMODEXT = @F9XMODEXT@ AM_CFLAGS = -I$(top_srcdir)/src # Test script for error_test and err_compat TEST_SCRIPT = $(top_srcdir)/test/testerror.sh check_SCRIPTS = $(TEST_SCRIPT) # These are our main targets. They should be listed in the order to be # executed, generally most specific tests to least specific tests. TEST_PROG = testhdf5 lheap ohdr stab gheap cache hyperslab istore bittests \ dtypes dsets cmpd_dset extend external links unlink big mtime \ fillval mount flush1 flush2 enum gass_write gass_read gass_append \ set_extent srb_write srb_append srb_read ttsafe stream_test \ getname file_handle ntypes dangle dtransform filename reserved # List programs to be built when testing here. error_test and err_compat are # built at the same time as the other tests, but executed by testerror.sh. # 'make check' doesn't run them directly, so they are not included in TEST_PROG. # Also build testmeta, which is used for timings test. It builds quickly, # and this lets automake keep all its test programs in one place. check_PROGRAMS = $(TEST_PROG) error_test err_compat testmeta # The libh5test.a library provides common support code for the tests. check_LTLIBRARIES = libh5test.la libh5test_la_SOURCES = h5test.c testframe.c libh5test_la_LIBADD = $(LIBHDF5) # Build the library statically because some compilers can only link # one dynamic library and the main hdf5 library is much larger than this # one. libh5test_la_LDFLAGS = -static # Use libhd5test.la to compile all of the tests LDADD = ${LIBHDF5} libh5test.la # List the source files for tests that have more than one ttsafe_SOURCES = ttsafe.c ttsafe_dcreate.c ttsafe_error.c ttsafe_cancel.c \ ttsafe_acreate.c # Temporary files. These files are the ones created by setting the # HDF5_NOCLEANUP environment variable and running `make test' without # specifying a file prefix or low-level driver. Changing the file # prefix or low-level driver with environment variables will influence # the temporary file name in ways that the makefile is not aware of. MOSTLYCLEANFILES = cmpd_dset.h5 compact_dataset.h5 dataset.h5 extend.h5 istore.h5\ tfile[1-4].h5 th5s[1-3].h5 lheap.h5 ohdr.h5 stab[1-2].h5 \ extern_[1-3].h5 extern_[1-4][ab].raw gheap[0-4].h5 \ links.h5 links[1-3].h5 big.data big[0-9][0-9][0-9][0-9][0-9].h5 \ dtypes[1-8].h5 tattr.h5 tselect.h5 mtime.h5 unlink.h5 \ fillval_[0-9].h5 fillval.raw mount_[0-9].h5 testmeta.h5 ttime.h5 \ trefer[1-3].h5 tvltypes.h5 tvlstr.h5 tvlstr2.h5 flush.h5 \ enum1.h5 titerate.h5 ttsafe.h5 tarray1.h5 tgenprop.h5 \ tmisc[0-9]*.h5 set_extent_read.h5 set_extent_create.h5 \ getname.h5 getname[1-3].h5 sec2_file.h5 \ family_file000[0-3][0-9].h5 multi_file-[rs].h5 core_file \ new_move_[ab].h5 ntypes.h5 dangle.h5 error_test.h5 err_compat.h5 \ dtransform.h5 test_filters.h5 get_file_name.h5 tstint[1-2].h5 \ unlink_chunked.h5 # Sources for testhdf5 executable testhdf5_SOURCES = testhdf5.c tarray.c tattr.c tconfig.c tfile.c tgenprop.c \ th5s.c theap.c tid.c titerate.c tmeta.c tmisc.c ttime.c trefer.c trefstr.c \ tselect.c tskiplist.c ttst.c tvltypes.c tvlstr.c # Automake needs to be taught how to build lib, progs, and tests targets. # These will be filled in automatically for the most part (e.g., # lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and # EXTRA_TEST variables are supplied to allow the user to force targets to # be built at certain times. LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) subdir = test mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/src/H5config.h CONFIG_CLEAN_FILES = libh5test_la_DEPENDENCIES = $(top_builddir)/src/libhdf5.la am_libh5test_la_OBJECTS = h5test.lo testframe.lo libh5test_la_OBJECTS = $(am_libh5test_la_OBJECTS) check_PROGRAMS = testhdf5$(EXEEXT) lheap$(EXEEXT) ohdr$(EXEEXT) \ stab$(EXEEXT) gheap$(EXEEXT) cache$(EXEEXT) hyperslab$(EXEEXT) \ istore$(EXEEXT) bittests$(EXEEXT) dtypes$(EXEEXT) \ dsets$(EXEEXT) cmpd_dset$(EXEEXT) extend$(EXEEXT) \ external$(EXEEXT) links$(EXEEXT) unlink$(EXEEXT) big$(EXEEXT) \ mtime$(EXEEXT) fillval$(EXEEXT) mount$(EXEEXT) flush1$(EXEEXT) \ flush2$(EXEEXT) enum$(EXEEXT) gass_write$(EXEEXT) \ gass_read$(EXEEXT) gass_append$(EXEEXT) set_extent$(EXEEXT) \ srb_write$(EXEEXT) srb_append$(EXEEXT) srb_read$(EXEEXT) \ ttsafe$(EXEEXT) stream_test$(EXEEXT) getname$(EXEEXT) \ file_handle$(EXEEXT) ntypes$(EXEEXT) dangle$(EXEEXT) \ dtransform$(EXEEXT) filename$(EXEEXT) reserved$(EXEEXT) \ error_test$(EXEEXT) err_compat$(EXEEXT) testmeta$(EXEEXT) big_SOURCES = big.c big_OBJECTS = big.$(OBJEXT) big_LDADD = $(LDADD) big_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la big_LDFLAGS = bittests_SOURCES = bittests.c bittests_OBJECTS = bittests.$(OBJEXT) bittests_LDADD = $(LDADD) bittests_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la bittests_LDFLAGS = cache_SOURCES = cache.c cache_OBJECTS = cache.$(OBJEXT) cache_LDADD = $(LDADD) cache_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la cache_LDFLAGS = cmpd_dset_SOURCES = cmpd_dset.c cmpd_dset_OBJECTS = cmpd_dset.$(OBJEXT) cmpd_dset_LDADD = $(LDADD) cmpd_dset_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la cmpd_dset_LDFLAGS = dangle_SOURCES = dangle.c dangle_OBJECTS = dangle.$(OBJEXT) dangle_LDADD = $(LDADD) dangle_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la dangle_LDFLAGS = dsets_SOURCES = dsets.c dsets_OBJECTS = dsets.$(OBJEXT) dsets_LDADD = $(LDADD) dsets_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la dsets_LDFLAGS = dtransform_SOURCES = dtransform.c dtransform_OBJECTS = dtransform.$(OBJEXT) dtransform_LDADD = $(LDADD) dtransform_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la dtransform_LDFLAGS = dtypes_SOURCES = dtypes.c dtypes_OBJECTS = dtypes.$(OBJEXT) dtypes_LDADD = $(LDADD) dtypes_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la dtypes_LDFLAGS = enum_SOURCES = enum.c enum_OBJECTS = enum.$(OBJEXT) enum_LDADD = $(LDADD) enum_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la enum_LDFLAGS = err_compat_SOURCES = err_compat.c err_compat_OBJECTS = err_compat.$(OBJEXT) err_compat_LDADD = $(LDADD) err_compat_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la err_compat_LDFLAGS = error_test_SOURCES = error_test.c error_test_OBJECTS = error_test.$(OBJEXT) error_test_LDADD = $(LDADD) error_test_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la error_test_LDFLAGS = extend_SOURCES = extend.c extend_OBJECTS = extend.$(OBJEXT) extend_LDADD = $(LDADD) extend_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la extend_LDFLAGS = external_SOURCES = external.c external_OBJECTS = external.$(OBJEXT) external_LDADD = $(LDADD) external_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la external_LDFLAGS = file_handle_SOURCES = file_handle.c file_handle_OBJECTS = file_handle.$(OBJEXT) file_handle_LDADD = $(LDADD) file_handle_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la file_handle_LDFLAGS = filename_SOURCES = filename.c filename_OBJECTS = filename.$(OBJEXT) filename_LDADD = $(LDADD) filename_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la filename_LDFLAGS = fillval_SOURCES = fillval.c fillval_OBJECTS = fillval.$(OBJEXT) fillval_LDADD = $(LDADD) fillval_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la fillval_LDFLAGS = flush1_SOURCES = flush1.c flush1_OBJECTS = flush1.$(OBJEXT) flush1_LDADD = $(LDADD) flush1_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la flush1_LDFLAGS = flush2_SOURCES = flush2.c flush2_OBJECTS = flush2.$(OBJEXT) flush2_LDADD = $(LDADD) flush2_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la flush2_LDFLAGS = gass_append_SOURCES = gass_append.c gass_append_OBJECTS = gass_append.$(OBJEXT) gass_append_LDADD = $(LDADD) gass_append_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la gass_append_LDFLAGS = gass_read_SOURCES = gass_read.c gass_read_OBJECTS = gass_read.$(OBJEXT) gass_read_LDADD = $(LDADD) gass_read_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la gass_read_LDFLAGS = gass_write_SOURCES = gass_write.c gass_write_OBJECTS = gass_write.$(OBJEXT) gass_write_LDADD = $(LDADD) gass_write_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la gass_write_LDFLAGS = getname_SOURCES = getname.c getname_OBJECTS = getname.$(OBJEXT) getname_LDADD = $(LDADD) getname_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la getname_LDFLAGS = gheap_SOURCES = gheap.c gheap_OBJECTS = gheap.$(OBJEXT) gheap_LDADD = $(LDADD) gheap_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la gheap_LDFLAGS = hyperslab_SOURCES = hyperslab.c hyperslab_OBJECTS = hyperslab.$(OBJEXT) hyperslab_LDADD = $(LDADD) hyperslab_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la hyperslab_LDFLAGS = istore_SOURCES = istore.c istore_OBJECTS = istore.$(OBJEXT) istore_LDADD = $(LDADD) istore_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la istore_LDFLAGS = lheap_SOURCES = lheap.c lheap_OBJECTS = lheap.$(OBJEXT) lheap_LDADD = $(LDADD) lheap_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la lheap_LDFLAGS = links_SOURCES = links.c links_OBJECTS = links.$(OBJEXT) links_LDADD = $(LDADD) links_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la links_LDFLAGS = mount_SOURCES = mount.c mount_OBJECTS = mount.$(OBJEXT) mount_LDADD = $(LDADD) mount_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la mount_LDFLAGS = mtime_SOURCES = mtime.c mtime_OBJECTS = mtime.$(OBJEXT) mtime_LDADD = $(LDADD) mtime_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la mtime_LDFLAGS = ntypes_SOURCES = ntypes.c ntypes_OBJECTS = ntypes.$(OBJEXT) ntypes_LDADD = $(LDADD) ntypes_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la ntypes_LDFLAGS = ohdr_SOURCES = ohdr.c ohdr_OBJECTS = ohdr.$(OBJEXT) ohdr_LDADD = $(LDADD) ohdr_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la ohdr_LDFLAGS = reserved_SOURCES = reserved.c reserved_OBJECTS = reserved.$(OBJEXT) reserved_LDADD = $(LDADD) reserved_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la reserved_LDFLAGS = set_extent_SOURCES = set_extent.c set_extent_OBJECTS = set_extent.$(OBJEXT) set_extent_LDADD = $(LDADD) set_extent_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la set_extent_LDFLAGS = srb_append_SOURCES = srb_append.c srb_append_OBJECTS = srb_append.$(OBJEXT) srb_append_LDADD = $(LDADD) srb_append_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la srb_append_LDFLAGS = srb_read_SOURCES = srb_read.c srb_read_OBJECTS = srb_read.$(OBJEXT) srb_read_LDADD = $(LDADD) srb_read_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la srb_read_LDFLAGS = srb_write_SOURCES = srb_write.c srb_write_OBJECTS = srb_write.$(OBJEXT) srb_write_LDADD = $(LDADD) srb_write_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la srb_write_LDFLAGS = stab_SOURCES = stab.c stab_OBJECTS = stab.$(OBJEXT) stab_LDADD = $(LDADD) stab_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la stab_LDFLAGS = stream_test_SOURCES = stream_test.c stream_test_OBJECTS = stream_test.$(OBJEXT) stream_test_LDADD = $(LDADD) stream_test_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la stream_test_LDFLAGS = am_testhdf5_OBJECTS = testhdf5.$(OBJEXT) tarray.$(OBJEXT) \ tattr.$(OBJEXT) tconfig.$(OBJEXT) tfile.$(OBJEXT) \ tgenprop.$(OBJEXT) th5s.$(OBJEXT) theap.$(OBJEXT) tid.$(OBJEXT) \ titerate.$(OBJEXT) tmeta.$(OBJEXT) tmisc.$(OBJEXT) \ ttime.$(OBJEXT) trefer.$(OBJEXT) trefstr.$(OBJEXT) \ tselect.$(OBJEXT) tskiplist.$(OBJEXT) ttst.$(OBJEXT) \ tvltypes.$(OBJEXT) tvlstr.$(OBJEXT) testhdf5_OBJECTS = $(am_testhdf5_OBJECTS) testhdf5_LDADD = $(LDADD) testhdf5_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la testhdf5_LDFLAGS = testmeta_SOURCES = testmeta.c testmeta_OBJECTS = testmeta.$(OBJEXT) testmeta_LDADD = $(LDADD) testmeta_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la testmeta_LDFLAGS = am_ttsafe_OBJECTS = ttsafe.$(OBJEXT) ttsafe_dcreate.$(OBJEXT) \ ttsafe_error.$(OBJEXT) ttsafe_cancel.$(OBJEXT) \ ttsafe_acreate.$(OBJEXT) ttsafe_OBJECTS = $(am_ttsafe_OBJECTS) ttsafe_LDADD = $(LDADD) ttsafe_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la ttsafe_LDFLAGS = unlink_SOURCES = unlink.c unlink_OBJECTS = unlink.$(OBJEXT) unlink_LDADD = $(LDADD) unlink_DEPENDENCIES = $(top_builddir)/src/libhdf5.la libh5test.la unlink_LDFLAGS = DEFS = @DEFS@ DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles @AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/big.Po ./$(DEPDIR)/bittests.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/cache.Po ./$(DEPDIR)/cmpd_dset.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/dangle.Po ./$(DEPDIR)/dsets.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/dtransform.Po ./$(DEPDIR)/dtypes.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/enum.Po ./$(DEPDIR)/err_compat.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/error_test.Po ./$(DEPDIR)/extend.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/external.Po ./$(DEPDIR)/file_handle.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/filename.Po ./$(DEPDIR)/fillval.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/flush1.Po ./$(DEPDIR)/flush2.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/gass_append.Po ./$(DEPDIR)/gass_read.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/gass_write.Po ./$(DEPDIR)/getname.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/gheap.Po ./$(DEPDIR)/h5test.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/hyperslab.Po ./$(DEPDIR)/istore.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/lheap.Po ./$(DEPDIR)/links.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/mount.Po ./$(DEPDIR)/mtime.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/ntypes.Po ./$(DEPDIR)/ohdr.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/reserved.Po ./$(DEPDIR)/set_extent.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/srb_append.Po ./$(DEPDIR)/srb_read.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/srb_write.Po ./$(DEPDIR)/stab.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/stream_test.Po ./$(DEPDIR)/tarray.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/tattr.Po ./$(DEPDIR)/tconfig.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/testframe.Plo ./$(DEPDIR)/testhdf5.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/testmeta.Po ./$(DEPDIR)/tfile.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/tgenprop.Po ./$(DEPDIR)/th5s.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/theap.Po ./$(DEPDIR)/tid.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/titerate.Po ./$(DEPDIR)/tmeta.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/tmisc.Po ./$(DEPDIR)/trefer.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/trefstr.Po ./$(DEPDIR)/tselect.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/tskiplist.Po ./$(DEPDIR)/ttime.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/ttsafe.Po ./$(DEPDIR)/ttsafe_acreate.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/ttsafe_cancel.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/ttsafe_dcreate.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/ttsafe_error.Po ./$(DEPDIR)/ttst.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/tvlstr.Po ./$(DEPDIR)/tvltypes.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/unlink.Po COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ CFLAGS = @CFLAGS@ DIST_SOURCES = $(libh5test_la_SOURCES) big.c bittests.c cache.c \ cmpd_dset.c dangle.c dsets.c dtransform.c dtypes.c enum.c \ err_compat.c error_test.c extend.c external.c file_handle.c \ filename.c fillval.c flush1.c flush2.c gass_append.c \ gass_read.c gass_write.c getname.c gheap.c hyperslab.c istore.c \ lheap.c links.c mount.c mtime.c ntypes.c ohdr.c reserved.c \ set_extent.c srb_append.c srb_read.c srb_write.c stab.c \ stream_test.c $(testhdf5_SOURCES) testmeta.c $(ttsafe_SOURCES) \ unlink.c DIST_COMMON = Makefile.am Makefile.in SOURCES = $(libh5test_la_SOURCES) big.c bittests.c cache.c cmpd_dset.c dangle.c dsets.c dtransform.c dtypes.c enum.c err_compat.c error_test.c extend.c external.c file_handle.c filename.c fillval.c flush1.c flush2.c gass_append.c gass_read.c gass_write.c getname.c gheap.c hyperslab.c istore.c lheap.c links.c mount.c mtime.c ntypes.c ohdr.c reserved.c set_extent.c srb_append.c srb_read.c srb_write.c stab.c stream_test.c $(testhdf5_SOURCES) testmeta.c $(ttsafe_SOURCES) unlink.c all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && \ $(AUTOMAKE) --foreign test/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) clean-checkLTLIBRARIES: -test -z "$(check_LTLIBRARIES)" || rm -f $(check_LTLIBRARIES) @list='$(check_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test -z "$dir" && dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libh5test.la: $(libh5test_la_OBJECTS) $(libh5test_la_DEPENDENCIES) $(LINK) $(libh5test_la_LDFLAGS) $(libh5test_la_OBJECTS) $(libh5test_la_LIBADD) $(LIBS) clean-checkPROGRAMS: @list='$(check_PROGRAMS)'; for p in $$list; do \ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ echo " rm -f $$p $$f"; \ rm -f $$p $$f ; \ done big$(EXEEXT): $(big_OBJECTS) $(big_DEPENDENCIES) @rm -f big$(EXEEXT) $(LINK) $(big_LDFLAGS) $(big_OBJECTS) $(big_LDADD) $(LIBS) bittests$(EXEEXT): $(bittests_OBJECTS) $(bittests_DEPENDENCIES) @rm -f bittests$(EXEEXT) $(LINK) $(bittests_LDFLAGS) $(bittests_OBJECTS) $(bittests_LDADD) $(LIBS) cache$(EXEEXT): $(cache_OBJECTS) $(cache_DEPENDENCIES) @rm -f cache$(EXEEXT) $(LINK) $(cache_LDFLAGS) $(cache_OBJECTS) $(cache_LDADD) $(LIBS) cmpd_dset$(EXEEXT): $(cmpd_dset_OBJECTS) $(cmpd_dset_DEPENDENCIES) @rm -f cmpd_dset$(EXEEXT) $(LINK) $(cmpd_dset_LDFLAGS) $(cmpd_dset_OBJECTS) $(cmpd_dset_LDADD) $(LIBS) dangle$(EXEEXT): $(dangle_OBJECTS) $(dangle_DEPENDENCIES) @rm -f dangle$(EXEEXT) $(LINK) $(dangle_LDFLAGS) $(dangle_OBJECTS) $(dangle_LDADD) $(LIBS) dsets$(EXEEXT): $(dsets_OBJECTS) $(dsets_DEPENDENCIES) @rm -f dsets$(EXEEXT) $(LINK) $(dsets_LDFLAGS) $(dsets_OBJECTS) $(dsets_LDADD) $(LIBS) dtransform$(EXEEXT): $(dtransform_OBJECTS) $(dtransform_DEPENDENCIES) @rm -f dtransform$(EXEEXT) $(LINK) $(dtransform_LDFLAGS) $(dtransform_OBJECTS) $(dtransform_LDADD) $(LIBS) dtypes$(EXEEXT): $(dtypes_OBJECTS) $(dtypes_DEPENDENCIES) @rm -f dtypes$(EXEEXT) $(LINK) $(dtypes_LDFLAGS) $(dtypes_OBJECTS) $(dtypes_LDADD) $(LIBS) enum$(EXEEXT): $(enum_OBJECTS) $(enum_DEPENDENCIES) @rm -f enum$(EXEEXT) $(LINK) $(enum_LDFLAGS) $(enum_OBJECTS) $(enum_LDADD) $(LIBS) err_compat$(EXEEXT): $(err_compat_OBJECTS) $(err_compat_DEPENDENCIES) @rm -f err_compat$(EXEEXT) $(LINK) $(err_compat_LDFLAGS) $(err_compat_OBJECTS) $(err_compat_LDADD) $(LIBS) error_test$(EXEEXT): $(error_test_OBJECTS) $(error_test_DEPENDENCIES) @rm -f error_test$(EXEEXT) $(LINK) $(error_test_LDFLAGS) $(error_test_OBJECTS) $(error_test_LDADD) $(LIBS) extend$(EXEEXT): $(extend_OBJECTS) $(extend_DEPENDENCIES) @rm -f extend$(EXEEXT) $(LINK) $(extend_LDFLAGS) $(extend_OBJECTS) $(extend_LDADD) $(LIBS) external$(EXEEXT): $(external_OBJECTS) $(external_DEPENDENCIES) @rm -f external$(EXEEXT) $(LINK) $(external_LDFLAGS) $(external_OBJECTS) $(external_LDADD) $(LIBS) file_handle$(EXEEXT): $(file_handle_OBJECTS) $(file_handle_DEPENDENCIES) @rm -f file_handle$(EXEEXT) $(LINK) $(file_handle_LDFLAGS) $(file_handle_OBJECTS) $(file_handle_LDADD) $(LIBS) filename$(EXEEXT): $(filename_OBJECTS) $(filename_DEPENDENCIES) @rm -f filename$(EXEEXT) $(LINK) $(filename_LDFLAGS) $(filename_OBJECTS) $(filename_LDADD) $(LIBS) fillval$(EXEEXT): $(fillval_OBJECTS) $(fillval_DEPENDENCIES) @rm -f fillval$(EXEEXT) $(LINK) $(fillval_LDFLAGS) $(fillval_OBJECTS) $(fillval_LDADD) $(LIBS) flush1$(EXEEXT): $(flush1_OBJECTS) $(flush1_DEPENDENCIES) @rm -f flush1$(EXEEXT) $(LINK) $(flush1_LDFLAGS) $(flush1_OBJECTS) $(flush1_LDADD) $(LIBS) flush2$(EXEEXT): $(flush2_OBJECTS) $(flush2_DEPENDENCIES) @rm -f flush2$(EXEEXT) $(LINK) $(flush2_LDFLAGS) $(flush2_OBJECTS) $(flush2_LDADD) $(LIBS) gass_append$(EXEEXT): $(gass_append_OBJECTS) $(gass_append_DEPENDENCIES) @rm -f gass_append$(EXEEXT) $(LINK) $(gass_append_LDFLAGS) $(gass_append_OBJECTS) $(gass_append_LDADD) $(LIBS) gass_read$(EXEEXT): $(gass_read_OBJECTS) $(gass_read_DEPENDENCIES) @rm -f gass_read$(EXEEXT) $(LINK) $(gass_read_LDFLAGS) $(gass_read_OBJECTS) $(gass_read_LDADD) $(LIBS) gass_write$(EXEEXT): $(gass_write_OBJECTS) $(gass_write_DEPENDENCIES) @rm -f gass_write$(EXEEXT) $(LINK) $(gass_write_LDFLAGS) $(gass_write_OBJECTS) $(gass_write_LDADD) $(LIBS) getname$(EXEEXT): $(getname_OBJECTS) $(getname_DEPENDENCIES) @rm -f getname$(EXEEXT) $(LINK) $(getname_LDFLAGS) $(getname_OBJECTS) $(getname_LDADD) $(LIBS) gheap$(EXEEXT): $(gheap_OBJECTS) $(gheap_DEPENDENCIES) @rm -f gheap$(EXEEXT) $(LINK) $(gheap_LDFLAGS) $(gheap_OBJECTS) $(gheap_LDADD) $(LIBS) hyperslab$(EXEEXT): $(hyperslab_OBJECTS) $(hyperslab_DEPENDENCIES) @rm -f hyperslab$(EXEEXT) $(LINK) $(hyperslab_LDFLAGS) $(hyperslab_OBJECTS) $(hyperslab_LDADD) $(LIBS) istore$(EXEEXT): $(istore_OBJECTS) $(istore_DEPENDENCIES) @rm -f istore$(EXEEXT) $(LINK) $(istore_LDFLAGS) $(istore_OBJECTS) $(istore_LDADD) $(LIBS) lheap$(EXEEXT): $(lheap_OBJECTS) $(lheap_DEPENDENCIES) @rm -f lheap$(EXEEXT) $(LINK) $(lheap_LDFLAGS) $(lheap_OBJECTS) $(lheap_LDADD) $(LIBS) links$(EXEEXT): $(links_OBJECTS) $(links_DEPENDENCIES) @rm -f links$(EXEEXT) $(LINK) $(links_LDFLAGS) $(links_OBJECTS) $(links_LDADD) $(LIBS) mount$(EXEEXT): $(mount_OBJECTS) $(mount_DEPENDENCIES) @rm -f mount$(EXEEXT) $(LINK) $(mount_LDFLAGS) $(mount_OBJECTS) $(mount_LDADD) $(LIBS) mtime$(EXEEXT): $(mtime_OBJECTS) $(mtime_DEPENDENCIES) @rm -f mtime$(EXEEXT) $(LINK) $(mtime_LDFLAGS) $(mtime_OBJECTS) $(mtime_LDADD) $(LIBS) ntypes$(EXEEXT): $(ntypes_OBJECTS) $(ntypes_DEPENDENCIES) @rm -f ntypes$(EXEEXT) $(LINK) $(ntypes_LDFLAGS) $(ntypes_OBJECTS) $(ntypes_LDADD) $(LIBS) ohdr$(EXEEXT): $(ohdr_OBJECTS) $(ohdr_DEPENDENCIES) @rm -f ohdr$(EXEEXT) $(LINK) $(ohdr_LDFLAGS) $(ohdr_OBJECTS) $(ohdr_LDADD) $(LIBS) reserved$(EXEEXT): $(reserved_OBJECTS) $(reserved_DEPENDENCIES) @rm -f reserved$(EXEEXT) $(LINK) $(reserved_LDFLAGS) $(reserved_OBJECTS) $(reserved_LDADD) $(LIBS) set_extent$(EXEEXT): $(set_extent_OBJECTS) $(set_extent_DEPENDENCIES) @rm -f set_extent$(EXEEXT) $(LINK) $(set_extent_LDFLAGS) $(set_extent_OBJECTS) $(set_extent_LDADD) $(LIBS) srb_append$(EXEEXT): $(srb_append_OBJECTS) $(srb_append_DEPENDENCIES) @rm -f srb_append$(EXEEXT) $(LINK) $(srb_append_LDFLAGS) $(srb_append_OBJECTS) $(srb_append_LDADD) $(LIBS) srb_read$(EXEEXT): $(srb_read_OBJECTS) $(srb_read_DEPENDENCIES) @rm -f srb_read$(EXEEXT) $(LINK) $(srb_read_LDFLAGS) $(srb_read_OBJECTS) $(srb_read_LDADD) $(LIBS) srb_write$(EXEEXT): $(srb_write_OBJECTS) $(srb_write_DEPENDENCIES) @rm -f srb_write$(EXEEXT) $(LINK) $(srb_write_LDFLAGS) $(srb_write_OBJECTS) $(srb_write_LDADD) $(LIBS) stab$(EXEEXT): $(stab_OBJECTS) $(stab_DEPENDENCIES) @rm -f stab$(EXEEXT) $(LINK) $(stab_LDFLAGS) $(stab_OBJECTS) $(stab_LDADD) $(LIBS) stream_test$(EXEEXT): $(stream_test_OBJECTS) $(stream_test_DEPENDENCIES) @rm -f stream_test$(EXEEXT) $(LINK) $(stream_test_LDFLAGS) $(stream_test_OBJECTS) $(stream_test_LDADD) $(LIBS) testhdf5$(EXEEXT): $(testhdf5_OBJECTS) $(testhdf5_DEPENDENCIES) @rm -f testhdf5$(EXEEXT) $(LINK) $(testhdf5_LDFLAGS) $(testhdf5_OBJECTS) $(testhdf5_LDADD) $(LIBS) testmeta$(EXEEXT): $(testmeta_OBJECTS) $(testmeta_DEPENDENCIES) @rm -f testmeta$(EXEEXT) $(LINK) $(testmeta_LDFLAGS) $(testmeta_OBJECTS) $(testmeta_LDADD) $(LIBS) ttsafe$(EXEEXT): $(ttsafe_OBJECTS) $(ttsafe_DEPENDENCIES) @rm -f ttsafe$(EXEEXT) $(LINK) $(ttsafe_LDFLAGS) $(ttsafe_OBJECTS) $(ttsafe_LDADD) $(LIBS) unlink$(EXEEXT): $(unlink_OBJECTS) $(unlink_DEPENDENCIES) @rm -f unlink$(EXEEXT) $(LINK) $(unlink_LDFLAGS) $(unlink_OBJECTS) $(unlink_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) core *.core distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/big.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bittests.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cache.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cmpd_dset.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dangle.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dsets.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dtransform.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dtypes.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/enum.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/err_compat.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/error_test.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/extend.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/external.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file_handle.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filename.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fillval.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flush1.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flush2.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gass_append.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gass_read.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gass_write.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getname.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gheap.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5test.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hyperslab.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/istore.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lheap.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/links.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mount.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mtime.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ntypes.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ohdr.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reserved.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/set_extent.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/srb_append.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/srb_read.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/srb_write.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stab.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stream_test.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tarray.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tattr.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tconfig.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testframe.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testhdf5.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testmeta.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tfile.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tgenprop.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/th5s.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/theap.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tid.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/titerate.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tmeta.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tmisc.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trefer.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trefstr.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tselect.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tskiplist.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttime.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_acreate.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_cancel.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_dcreate.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttsafe_error.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttst.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tvlstr.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tvltypes.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/unlink.Po@am__quote@ distclean-depend: -rm -rf ./$(DEPDIR) .c.o: @AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ @AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< .c.obj: @AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ @AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ $(COMPILE) -c `cygpath -w $<` .c.lo: @AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ @AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< CCDEPMODE = @CCDEPMODE@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: ETAGS = etags ETAGSFLAGS = tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$tags$$unique" \ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) top_distdir = .. distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) @list='$(DISTFILES)'; for file in $$list; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkinstalldirs) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_LTLIBRARIES) $(check_PROGRAMS) \ $(check_SCRIPTS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-am all-am: Makefile all-local installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-checkLTLIBRARIES clean-checkPROGRAMS clean-generic \ clean-libtool mostlyclean-am distclean: distclean-am distclean-am: clean-am distclean-compile distclean-depend \ distclean-generic distclean-libtool distclean-tags dvi: dvi-am dvi-am: info: info-am info-am: install-data-am: install-exec-am: install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool uninstall-am: uninstall-info-am .PHONY: GTAGS all all-am all-local check check-TESTS check-am clean \ clean-checkLTLIBRARIES clean-checkPROGRAMS clean-generic \ clean-libtool distclean distclean-compile distclean-depend \ distclean-generic distclean-libtool distclean-tags distdir dvi \ dvi-am info info-am install install-am install-data \ install-data-am install-exec install-exec-am install-info \ install-info-am install-man install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool tags uninstall \ uninstall-am uninstall-info-am # Let automake worry about Makefiles and configure components being up-to- # date. # # # The following rules insure that the Makefile is up-to-date by rerunning # various autoconf components (although not all versions of make assume # that the makefile is implicitly a target). We use time stamp files to # keep track of the most recent update of H5config.h.in and H5config.h # because autoheader and config.status don't update the modification time # if the contents don't change. # Invoke it by "gmake reconfigure". # # Graphically, the dependencies are: # # configure.in # | | # +-----------------+ +------------+ # | | # stamp1 configure # (H5config.h.in) | # | | | # | +---------------+ +-----------+ # | | | # | config.status # | | # | +------------------+ # | | # stamp2 # (H5config.h) Makefile.in et al # | | # +------------------+ +-----------+ # | | # Makefile # # A side effect of updating stamp1 is to generate H5config.h.in and a # side effect of updating stamp2 is to generate H5config.h. When using # a version of make that doesn't treat the makefile as the initial target # the user may want to occassionally type `make Makefile' in any source # directory. # The `Makefile' target has been renamed to `reconfigure' so that the # autoconf and make depend processes do not start up automatically. # One must do `make reconfigure' explicitedly to start the process. # (When srcdir is used and if more than one machines are running, # this automatic Makefile/autoconf can get things unstable.) # #STAMP1=$(top_builddir)/config/stamp1 #STAMP2=$(top_builddir)/config/stamp2 #MAKEFILE_PARTS=$(srcdir)/Makefile.in \ # $(top_srcdir)/config/commence.am \ # $(top_srcdir)/config/conclude.am #$(STAMP1): $(top_srcdir)/configure.in # touch $(STAMP1) # -cd $(top_srcdir); autoheader #$(STAMP2): $(STAMP1) $(top_builddir)/config.status # touch $(STAMP2) # -cd $(top_builddir); \ # CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status # Automake supplies a rule to generate configure #$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) # -cd $(top_builddir); ./config.status --recheck # rerun the autoconf process if any configure components have changed. #reconfigure: $(MAKEFILE_PARTS) $(STAMP2) # -cd $(top_builddir); CONFIG_HEADERS= ./config.status # @for sub in @subdirs@ dummy; do \ # if test $$sub != dummy; then \ # -cd $$sub; $(MAKE) reconfigure; \ # fi; \ # done; #----------------------------------------------------------------------------- # The following section of this makefile comes from the middle of # `Makefile.am' from this directory. # It was generated by running automake on `Makefile.am' to create # `Makefile.in', then running `config.status' to create this Makefile. #----------------------------------------------------------------------------- # Additional target for running timing test timings _timings: testmeta @for timing in $(TIMINGS) dummy; do \ if test $$timing != dummy; then \ echo "Running $$timing $(TEST_FLAGS)"; \ $(RUNTEST) ./$$timing $(TEST_FLAGS) || exit 1; \ fi; \ done; # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) build-tests: $(LIB) $(PROGS) $(TESTS) lib progs tests :: @$(MAKE) build-$@ || exit 1; \ for d in X $(SUBDIRS); do \ if test $$d != X -a $$d != .; then \ (set -x; cd $$d && $(MAKE) $@) || exit 1; \ fi; \ done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. install-doc uninstall-doc: @echo "Nothing to be done." # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # # Note that targets in TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test test _test: $(PROGS) $(TESTS) @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @for test in $(TEST_PROG) dummy; do \ if test $$test != dummy; then \ echo "============================"; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ else \ echo "Testing $$test $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ srcdir="$(srcdir)" \ $(RUNTEST) ./$$test $(TEST_FLAGS) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ break; \ echo ""; \ fi; \ done; \ test $$test = dummy || false @if test -n "$(TEST_PROG_PARA)"; then \ echo "**** Hint ****"; \ echo "Parallel test files reside in the current directory" \ "by default."; \ echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ echo " HDF5_PARAPREFIX=/PFS/user/me"; \ echo " export HDF5_PARAPREFIX"; \ echo " make check"; \ echo "**** end of Hint ****"; \ fi @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ echo "============================"; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ else \ echo "Testing $$test $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ srcdir="$(srcdir)" \ $(RUNPARALLEL) ./$$test $(TEST_FLAGS) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ break; \ echo ""; \ fi; \ done; \ test $$test = dummy || false @for test in $(TEST_SCRIPT) dummy; do \ if test $$test != dummy; then \ echo "============================"; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ else \ echo "Testing $$test $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ /bin/sh $$test $(TEST_FLAGS) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ break; \ echo ""; \ fi; \ done; \ test $$test = dummy || false @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi # Run test with different Virtual File Driver check-vfd: @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ echo "Testing Virtual File Driver $$vfd"; \ echo "============================"; \ HDF5_DRIVER=$$vfd $(MAKE) check; \ fi; \ done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: