/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 * Copyright by the Board of Trustees of the University of Illinois.         *
 * All rights reserved.                                                      *
 *                                                                           *
 * This file is part of HDF5.  The full HDF5 copyright notice, including     *
 * terms governing use, modification, and redistribution, is contained in    *
 * the files COPYING and Copyright.html.  COPYING can be found at the root   *
 * of the source code distribution tree; Copyright.html can be found at the  *
 * root level of an installed copy of the electronic HDF5 document set and   *
 * is linked from the top-level documents page.  It can also be found at     *
 * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have     *
 * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. *
 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

/*
 * Programmer:	Robb Matzke <matzke@llnl.gov>
 *		Tuesday, December  9, 1997
 *
 * Purpose:	Tests the dataset interface (H5D)
 */

#include <stdlib.h>
#include <time.h>

#include "h5test.h"
#ifdef H5_HAVE_SZLIB_H
#   include "szlib.h"
#endif

/*
 * This file needs to access private datatypes from the H5Z package.
 */
#define H5Z_PACKAGE
#include "H5Zpkg.h"

const char *FILENAME[] = {
    "dataset",
    "compact_dataset",
    "dset_offset",
    "max_compact_dataset",
    "simple",
    "set_local",
    NULL
};

#define FILE_DEFLATE_NAME       "deflate.h5"

/* Dataset names for testing filters */
#define DSET_DEFAULT_NAME	"default"
#define DSET_CHUNKED_NAME	"chunked"
#define DSET_COMPACT_NAME       "compact"
#define DSET_SIMPLE_IO_NAME	"simple_io"
#define DSET_USERBLOCK_IO_NAME	"userblock_io"
#define DSET_COMPACT_IO_NAME    "compact_io"
#define DSET_COMPACT_MAX_NAME   "max_compact"
#define DSET_COMPACT_MAX2_NAME   "max_compact_2"
#define DSET_CONV_BUF_NAME	"conv_buf"
#define DSET_TCONV_NAME		"tconv"
#define DSET_DEFLATE_NAME	"deflate"
#define DSET_SZIP_NAME          "szip"
#define DSET_SHUFFLE_NAME	"shuffle"
#define DSET_FLETCHER32_NAME	"fletcher32"
#define DSET_FLETCHER32_NAME_2	"fletcher32_2"
#define DSET_FLETCHER32_NAME_3	"fletcher32_3"
#define DSET_SHUF_DEF_FLET_NAME	"shuffle+deflate+fletcher32"
#define DSET_SHUF_DEF_FLET_NAME_2	"shuffle+deflate+fletcher32_2"
#define DSET_SHUF_SZIP_FLET_NAME	"shuffle+szip+fletcher32"
#define DSET_SHUF_SZIP_FLET_NAME_2	"shuffle+szip+fletcher32_2"

#define DSET_BOGUS_NAME		"bogus"
#define DSET_MISSING_NAME	"missing"
#define DSET_CAN_APPLY_NAME	"can_apply"
#define DSET_CAN_APPLY_SZIP_NAME	"can_apply_szip"
#define DSET_SET_LOCAL_NAME	"set_local"
#define DSET_SET_LOCAL_NAME_2	"set_local_2"
#define DSET_ONEBYTE_SHUF_NAME   "onebyte_shuffle"
#define DSET_NBIT_INT_NAME             "nbit_int"
#define DSET_NBIT_FLOAT_NAME           "nbit_float"
#define DSET_NBIT_DOUBLE_NAME          "nbit_double"
#define DSET_NBIT_ARRAY_NAME           "nbit_array"
#define DSET_NBIT_COMPOUND_NAME        "nbit_compound"
#define DSET_NBIT_COMPOUND_NAME_2      "nbit_compound_2"
#define DSET_NBIT_COMPOUND_NAME_3      "nbit_compound_3"
#define DSET_SCALEOFFSET_INT_NAME      "scaleoffset_int"
#define DSET_SCALEOFFSET_INT_NAME_2    "scaleoffset_int_2"
#define DSET_SCALEOFFSET_FLOAT_NAME    "scaleoffset_float"
#define DSET_SCALEOFFSET_FLOAT_NAME_2  "scaleoffset_float_2"
#define DSET_SCALEOFFSET_DOUBLE_NAME   "scaleoffset_double"
#define DSET_SCALEOFFSET_DOUBLE_NAME_2 "scaleoffset_double_2"
#define DSET_COMPARE_DCPL_NAME	"compare_dcpl"
#define DSET_COMPARE_DCPL_NAME_2	"compare_dcpl_2"

#define USER_BLOCK              1024
#define SIXTY_FOUR_KB           65536

/* Temporary filter IDs used for testing */
#define H5Z_FILTER_BOGUS	305
#define H5Z_FILTER_CORRUPT	306
#define H5Z_FILTER_BOGUS2	307

/* Flags for testing filters */
#define DISABLE_FLETCHER32      0
#define ENABLE_FLETCHER32       1
#define DATA_CORRUPTED          1
#define DATA_NOT_CORRUPTED      0

/* Parameters for the "set local" test */
#define BOGUS2_PERM_NPARMS      2       /* Number of "permanent" parameters */
#define BOGUS2_PARAM_1          13      /* (No particular meaning, just for checking value) */
#define BOGUS2_PARAM_2          35      /* (No particular meaning, just for checking value) */
#define BOGUS2_ALL_NPARMS       4       /* Total number of parameter = permanent + "local" parameters */

/* Dimensionality for conversion buffer test */
#define DIM1          100  /* Dim. Size of data member # 1 */
#define DIM2         5000  /* Dim. Size of data member # 2 */
#define DIM3           10  /* Dim. Size of data member # 3 */

/* Parameters for internal filter test */
#define FILTER_CHUNK_DIM1       2
#define FILTER_CHUNK_DIM2       25
#define FILTER_HS_OFFSET1       7
#define FILTER_HS_OFFSET2       30
#define FILTER_HS_SIZE1         4
#define FILTER_HS_SIZE2         50

/* Names for noencoder test */
#define NOENCODER_FILENAME "noencoder.h5"
#define NOENCODER_TEST_DATASET "noencoder_tdset.h5"
#define NOENCODER_SZIP_DATASET "noencoder_szip_dset.h5"
#define NOENCODER_SZIP_SHUFF_FLETCH_DATASET "noencoder_szip_shuffle_fletcher_dset.h5"

/* Names for zero-dim test */
#define ZERODIM_DATASET "zerodim"

/* Parameters for zero-dim test */
#define MISSING_CHUNK_DATASET   "missing_chunk"
#define MISSING_CHUNK_DIM       100

/* Shared global arrays */
#define DSET_DIM1       100
#define DSET_DIM2       200
int	points[DSET_DIM1][DSET_DIM2], check[DSET_DIM1][DSET_DIM2];
double	points_dbl[DSET_DIM1][DSET_DIM2], check_dbl[DSET_DIM1][DSET_DIM2];

/* Local prototypes for filter functions */
static size_t filter_bogus(unsigned int flags, size_t cd_nelmts,
    const unsigned int *cd_values, size_t nbytes, size_t *buf_size, void **buf);
static herr_t can_apply_bogus(hid_t dcpl_id, hid_t type_id, hid_t space_id);
static herr_t set_local_bogus2(hid_t dcpl_id, hid_t type_id, hid_t space_id);
static size_t filter_bogus2(unsigned int flags, size_t cd_nelmts,
    const unsigned int *cd_values, size_t nbytes, size_t *buf_size, void **buf);
static size_t filter_corrupt(unsigned int flags, size_t cd_nelmts,
    const unsigned int *cd_values, size_t nbytes, size_t *buf_size, void **buf);


/*-------------------------------------------------------------------------
 * Function:	test_create
 *
 * Purpose:	Attempts to create a dataset.
 *
 * Return:	Success:	0
 *
 *		Failure:	-1
 *
 * Programmer:	Robb Matzke
 *		Tuesday, December  9, 1997
 *
 * Modifications:
 *              Added test for compact dataset creation.
 *              Raymond Lu
 *              August 8, 2002
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_create(hid_t file)
{
    hid_t	dataset, space, small_space, create_parms;
    hsize_t	dims[2], small_dims[2];
    herr_t	status;
    hsize_t	csize[2];

    TESTING("create, open, close");

    /* Create the data space */
    dims[0] = 256;
    dims[1] = 512;
    space = H5Screate_simple(2, dims, NULL);
    assert(space>=0);

    /* Create a small data space for compact dataset */
    small_dims[0] = 16;
    small_dims[1] = 8;
    small_space = H5Screate_simple(2, small_dims, NULL);
    assert(space>=0);

    /*
     * Create a dataset using the default dataset creation properties.	We're
     * not sure what they are, so we won't check.
     */
    dataset = H5Dcreate(file, DSET_DEFAULT_NAME, H5T_NATIVE_DOUBLE, space,
			H5P_DEFAULT);
    if (dataset<0) goto error;

    /* Close the dataset */
    if (H5Dclose(dataset) < 0) goto error;

    /* Add a comment to the dataset */
    status = H5Gset_comment(file, DSET_DEFAULT_NAME, "This is a dataset");
    if (status<0) goto error;

    /*
     * Try creating a dataset that already exists.  This should fail since a
     * dataset can only be created once.  Temporarily turn off error
     * reporting.
     */
    H5E_BEGIN_TRY {
	dataset = H5Dcreate(file, DSET_DEFAULT_NAME, H5T_NATIVE_DOUBLE, space,
			    H5P_DEFAULT);
    } H5E_END_TRY;
    if (dataset >= 0) {
	H5_FAILED();
	puts("    Library allowed overwrite of existing dataset.");
	goto error;
    }

    /*
     * Open the dataset we created above and then close it.  This is how
     * existing datasets are accessed.
     */
    if (H5Fflush(file, H5F_SCOPE_GLOBAL) < 0) goto error;
    if ((dataset = H5Dopen(file, DSET_DEFAULT_NAME))<0) goto error;
    if (H5Dclose(dataset) < 0) goto error;

    /*
     * Try opening a non-existent dataset. This should fail since new datasets
     * cannot be created with this function.  Temporarily turn off error
     * reporting.
     */
    H5E_BEGIN_TRY {
	dataset = H5Dopen(file, "does_not_exist");
    } H5E_END_TRY;
    if (dataset >= 0) {
	H5_FAILED();
	puts("    Opened a non-existent dataset.");
	goto error;
    }

    /*
     * Create a new dataset that uses chunked storage instead of the default
     * layout.
     */
    create_parms = H5Pcreate(H5P_DATASET_CREATE);
    assert(create_parms >= 0);

    /* Attempt to create a dataset with invalid chunk sizes */
    csize[0] = dims[0]*2;
    csize[1] = dims[1]*2;
    status = H5Pset_chunk(create_parms, 2, csize);
    assert(status >= 0);
    H5E_BEGIN_TRY {
        dataset = H5Dcreate(file, DSET_CHUNKED_NAME, H5T_NATIVE_DOUBLE, space,
			create_parms);
    } H5E_END_TRY;
    if (dataset >= 0) {
	H5_FAILED();
	puts("    Opened a dataset with incorrect chunking parameters.");
	goto error;
    }

    csize[0] = 5;
    csize[1] = 100;
    status = H5Pset_chunk(create_parms, 2, csize);
    assert(status >= 0);

    dataset = H5Dcreate(file, DSET_CHUNKED_NAME, H5T_NATIVE_DOUBLE, space,
			create_parms);
    if (dataset < 0) goto error;
    H5Pclose (create_parms);

    /* Test dataset address.  Should be undefined. */
    if(H5Dget_offset(dataset)!=HADDR_UNDEF) goto error;

    /*
     * Close the chunked dataset.
     */
    if (H5Dclose(dataset) < 0) goto error;

    /*
     * Create a compact dataset, then close it.
     */
    create_parms = H5Pcreate(H5P_DATASET_CREATE);
    assert(create_parms >= 0);
    status = H5Pset_layout(create_parms, H5D_COMPACT);
    assert(status >= 0);
    status = H5Pset_alloc_time(create_parms, H5D_ALLOC_TIME_EARLY);
    assert(status >= 0);

    dataset = H5Dcreate(file, DSET_COMPACT_NAME, H5T_NATIVE_DOUBLE,
                        small_space, create_parms);
    if(dataset < 0) goto error;
    H5Pclose(create_parms);
    if(H5Dclose(dataset) <0) goto error;

    PASSED();
    return 0;

 error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:	test_simple_io
 *
 * Purpose:	Tests simple I/O.  That is, reading and writing a complete
 *		multi-dimensional array without data type or data space
 *		conversions, without compression, and stored contiguously.
 *
 * Return:	Success:	0
 *
 *		Failure:	-1
 *
 * Programmer:	Robb Matzke
 *		Wednesday, December 10, 1997
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_simple_io(hid_t fapl)
{
    char                filename[32];
    hid_t		file, dataset, space, xfer;
    int			i, j, n;
    hsize_t		dims[2];
    void		*tconv_buf = NULL;
    int                 f;
    haddr_t             offset;
    int                 rdata[DSET_DIM1][DSET_DIM2];

    TESTING("simple I/O");

    h5_fixname(FILENAME[4], fapl, filename, sizeof filename);

    /* Initialize the dataset */
    for (i = n = 0; i < DSET_DIM1; i++)
	for (j = 0; j < DSET_DIM2; j++)
	    points[i][j] = n++;

    if ((file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl))<0)
	goto error;

    /* Create the data space */
    dims[0] = DSET_DIM1;
    dims[1] = DSET_DIM2;
    if ((space = H5Screate_simple(2, dims, NULL))<0) goto error;

    /* Create a small conversion buffer to test strip mining */
    tconv_buf = malloc (1000);
    xfer = H5Pcreate (H5P_DATASET_XFER);
    assert (xfer>=0);
    if (H5Pset_buffer (xfer, (size_t)1000, tconv_buf, NULL)<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_SIMPLE_IO_NAME, H5T_NATIVE_INT, space,
			     H5P_DEFAULT))<0) goto error;

    /* Test dataset address.  Should be undefined. */
    if(H5Dget_offset(dataset)!=HADDR_UNDEF) goto error;

    /* Write the data to the dataset */
    if (H5Dwrite(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, xfer, points)<0)
	goto error;

    /* Test dataset address in file. Open the same file as a C file, seek
     * the data position as H5Dget_offset points to, read the dataset, and
     * compare it with the data written in.*/
    if((offset=H5Dget_offset(dataset))==HADDR_UNDEF) goto error;

    /* Read the dataset back */
    if (H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, xfer, check)<0)
	goto error;

    /* Check that the values read are the same as the values written */
    for (i = 0; i < DSET_DIM1; i++) {
	for (j = 0; j < DSET_DIM2; j++) {
	    if (points[i][j] != check[i][j]) {
		H5_FAILED();
		printf("    Read different values than written.\n");
		printf("    At index %d,%d\n", i, j);
		goto error;
	    }
	}
    }

    if(H5Pclose (xfer)<0) goto error;
    if(H5Dclose(dataset)<0) goto error;
    if(H5Fclose(file)<0) goto error;

    f = HDopen(filename, O_RDONLY, 0);
    HDlseek(f, (off_t)offset, SEEK_SET);
    HDread(f, rdata, sizeof(int)*DSET_DIM1*DSET_DIM2);

    /* Check that the values read are the same as the values written */
    for (i = 0; i < DSET_DIM1; i++) {
	for (j = 0; j < DSET_DIM2; j++) {
	    if (points[i][j] != rdata[i][j]) {
		H5_FAILED();
		printf("    Read different values than written.\n");
		printf("    At index %d,%d\n", i, j);
		goto error;
	    }
	}
    }

    HDclose(f);

    free (tconv_buf);
    PASSED();
    return 0;

error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:	test_userblock_offset
 *
 * Purpose:	Tests H5Dget_offset when user block exists.
 *
 * Return:	Success:	0
 *
 *		Failure:	-1
 *
 * Programmer:	Raymond Lu
 *		Wednesday, November 27, 2002
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_userblock_offset(hid_t fapl)
{
    char                filename[32];
    hid_t		file, fcpl, dataset, space;
    int			i, j;
    hsize_t		dims[2];
    int                   f;
    haddr_t             offset;
    int                 rdata[DSET_DIM1][DSET_DIM2];

    TESTING("dataset offset with user block");

    h5_fixname(FILENAME[2], fapl, filename, sizeof filename);

    if((fcpl=H5Pcreate(H5P_FILE_CREATE))<0) goto error;
    if(H5Pset_userblock(fcpl, (hsize_t)USER_BLOCK)<0) goto error;

    if ((file=H5Fcreate(filename, H5F_ACC_TRUNC, fcpl, fapl))<0)
	goto error;

    /* Create the data space */
    dims[0] = DSET_DIM1;
    dims[1] = DSET_DIM2;
    if ((space = H5Screate_simple(2, dims, NULL))<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_USERBLOCK_IO_NAME, H5T_NATIVE_INT, space,
			     H5P_DEFAULT))<0) goto error;

    /* Write the data to the dataset */
    if (H5Dwrite(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, points)<0)
	goto error;

    /* Test dataset address in file. Open the same file as a C file, seek
     * the data position as H5Dget_offset points to, read the dataset, and
     * compare it with the data written in.*/
    if((offset=H5Dget_offset(dataset))==HADDR_UNDEF) goto error;

    if(H5Dclose(dataset)<0) goto error;
    if(H5Fclose(file)<0) goto error;

    f = HDopen(filename, O_RDONLY, 0);
    HDlseek(f, (off_t)offset, SEEK_SET);
    HDread(f, rdata, sizeof(int)*DSET_DIM1*DSET_DIM2);

    /* Check that the values read are the same as the values written */
    for (i = 0; i < DSET_DIM1; i++) {
	for (j = 0; j < DSET_DIM2; j++) {
	    if (points[i][j] != rdata[i][j]) {
		H5_FAILED();
		printf("    Read different values than written.\n");
		printf("    At index %d,%d\n", i, j);
		goto error;
	    }
	}
    }

    HDclose(f);

    PASSED();
    return 0;

error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:    test_compact_io
 *
 * Purpose:     Tests compact dataset I/O.  That is, reading and writing a
 *              complete multi-dimensional array without data type or data
 *              space conversions, without compression, and store in
 *              compact dataset.
 *
 * Return:      Success:        0
 *
 *              Failure:        -1
 *
 * Programmer:  Raymond Lu
 *              August 8, 2002
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_compact_io(hid_t fapl)
{
    hid_t       file, dataset, space, plist;
    hsize_t     dims[2];
    herr_t      status;
    int         wbuf[16][8], rbuf[16][8];
    char	filename[1024];
    int         i, j, n;

    TESTING("compact dataset I/O");

    /* Initialize data */
    n=0;
    for(i=0; i<16; i++) {
        for(j=0; j<8; j++) {
            wbuf[i][j] = n++;
        }
    }

    /* Create a small data space for compact dataset */
    dims[0] = 16;
    dims[1] = 8;
    space = H5Screate_simple(2, dims, NULL);
    assert(space>=0);

    /* Create a file */
    h5_fixname(FILENAME[1], fapl, filename, sizeof filename);
    if((file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl))<0)
        goto error;

    /* Create property list for compact dataset creation */
    plist = H5Pcreate(H5P_DATASET_CREATE);
    assert(plist >= 0);
    status = H5Pset_layout(plist, H5D_COMPACT);
    assert(status >= 0);
    status = H5Pset_alloc_time(plist, H5D_ALLOC_TIME_EARLY);
    assert(status >= 0);

    /* Create and write to a compact dataset */
    if((dataset = H5Dcreate(file, DSET_COMPACT_IO_NAME, H5T_NATIVE_INT, space,
                        plist))<0)
        goto error;

    /* Test dataset address.  Should be undefined. */
    if(H5Dget_offset(dataset)!=HADDR_UNDEF) goto error;

    if(H5Dwrite(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, wbuf)<0)
        goto error;

    /* Test dataset address.  Should be undefined. */
    if(H5Dget_offset(dataset)!=HADDR_UNDEF) goto error;

    /* Close file */
    H5Sclose(space);
    H5Pclose(plist);
    H5Dclose(dataset);
    H5Fclose(file);

    /*
     * Open the file and check data
     */
    if((file=H5Fopen(filename, H5F_ACC_RDONLY, fapl))<0)
        goto error;
    if((dataset = H5Dopen(file, DSET_COMPACT_IO_NAME))<0)
        goto error;
    if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, rbuf)<0)
        goto error;

     /* Check that the values read are the same as the values written */
     for (i = 0; i < 16; i++) {
         for (j = 0; j < 8; j++) {
             if (rbuf[i][j] != wbuf[i][j]) {
                 H5_FAILED();
                 printf("    Read different values than written.\n");
                 printf("    At index %d,%d\n", i, j);
                 printf("    wbuf[%d][%d]=%d\n", i, j, wbuf[i][j]);
                 printf("    rbuf[%d][%d]=%d\n", i, j, rbuf[i][j]);
                 goto error;
             }
         }
     }

     H5Dclose(dataset);
     H5Fclose(file);
     PASSED();
     return 0;

 error:
     return -1;
}


/*-------------------------------------------------------------------------
 * Function:    test_max_compact
 *
 * Purpose:     Tests compact dataset of maximal size.
 *
 * Return:      Success:        0
 *
 *              Failure:        -1
 *
 * Programmer:  Raymond Lu
 *              August 8, 2002
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_max_compact(hid_t fapl)
{
    hid_t       file, dataset, space, plist;
    hsize_t     dims[1];
    hsize_t     compact_size;
    herr_t      status;
    int         *wbuf, *rbuf;
    char	filename[1024];
    int         i,  n;

    TESTING("compact dataset of maximal size");

    /* Test compact dataset of size 64KB-64 */

    /* Initialize data */
    compact_size = (SIXTY_FOUR_KB-64)/sizeof(int);

    wbuf = (int*)HDmalloc(sizeof(int)*(size_t)compact_size);
    rbuf = (int*)HDmalloc(sizeof(int)*(size_t)compact_size);

    n=0;
    for(i=0; i<(int)compact_size; i++)
            wbuf[i] = n++;

    /* Create a small data space for compact dataset */
    dims[0] = compact_size;
    space = H5Screate_simple(1, dims, NULL);
    assert(space>=0);

    /* Create a file */
    h5_fixname(FILENAME[3], fapl, filename, sizeof filename);
    if((file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl))<0)
        goto error;

    /* Create property list for compact dataset creation */
    plist = H5Pcreate(H5P_DATASET_CREATE);
    assert(plist >= 0);
    status = H5Pset_layout(plist, H5D_COMPACT);
    assert(status >= 0);

    /* Create and write to a compact dataset */
    if((dataset = H5Dcreate(file, DSET_COMPACT_MAX_NAME, H5T_NATIVE_INT, space,
                        plist))<0)
        goto error;

    if(H5Dwrite(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, wbuf)<0)
        goto error;

    /* Close file */
    H5Sclose(space);
    H5Pclose(plist);
    H5Dclose(dataset);
    H5Fclose(file);

    /*
     * Open the file and check data
     */
    if((file=H5Fopen(filename, H5F_ACC_RDONLY, fapl))<0)
        goto error;
    if((dataset = H5Dopen(file, DSET_COMPACT_MAX_NAME))<0)
        goto error;
    if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, rbuf)<0)
        goto error;

     /* Check that the values read are the same as the values written */
     for (i = 0; i < (int)compact_size; i++) {
        if (rbuf[i] != wbuf[i]) {
            H5_FAILED();
            printf("    Read different values than written.\n");
            printf("    At index %d\n", i);
            goto error;
        }
     }

     H5Dclose(dataset);
     H5Fclose(file);
     HDfree(wbuf);
     HDfree(rbuf);


     /* Test compact dataset of size 64KB */

     /* Create a data space for compact dataset */
     compact_size = SIXTY_FOUR_KB/sizeof(int);
     dims[0] = compact_size;
     space = H5Screate_simple(1, dims, NULL);
     assert(space>=0);

     /* Open file */
     if((file=H5Fopen(filename, H5F_ACC_RDWR, fapl))<0)
         goto error;

     /* Create property list for compact dataset creation */
     plist = H5Pcreate(H5P_DATASET_CREATE);
     assert(plist >= 0);
     status = H5Pset_layout(plist, H5D_COMPACT);
     assert(status >= 0);

     /* Create and write to a compact dataset */
     H5E_BEGIN_TRY {
         H5Dcreate(file, DSET_COMPACT_MAX2_NAME, H5T_NATIVE_INT, space, plist);
     } H5E_END_TRY;

     /* Close file */
     H5Sclose(space);
     H5Pclose(plist);
     H5Fclose(file);

     PASSED();
     return 0;

error:
     return -1;
}


/*-------------------------------------------------------------------------
 * Function:	test_conv_buffer
 *
 * Purpose:	Test size of data type conversion buffer.
 *
 * Return:	Success:	0
 *
 *		Failure:	-1
 *
 * Programmer:	Raymond Lu
 *		Monday, May 12, 2003
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_conv_buffer(hid_t fid)
{
    typedef struct
    {
        int      a[DIM1][DIM2][DIM3];
        float    b[DIM2];
        double   c[DIM3];
    } CmpField;

    typedef struct
    {
        float    b[DIM2];
        double   c[DIM3];
    } CmpFieldR;

    herr_t       status = -1;
    int          j, k, l;

    CmpField     *cf;
    CmpFieldR    *cfrR;

    hid_t       dataset = -1; /* dataset ID             */
    hid_t       space   = -1; /* data space ID          */
    hid_t       ctype1, ctype2; /* data type ID           */
    hid_t       arr_type1, arr_type2, arr_type3, arr_type4, arr_type5;
    hsize_t     dimsa[3];
    hsize_t     dimsb[1];
    hsize_t     dimsc[1];
    hid_t       xfer_list;
    size_t      size;

    TESTING("data type conversion buffer size");

    cf = (CmpField *)calloc(1, sizeof(CmpField));

    /* Populate the data members */
    for (j = 0; j < DIM1; j++)
	for (k = 0; k < DIM2; k++)
	    for (l = 0; l < DIM3; l++)
		cf->a[j][k][l] = 10*(j+1) + l + k;

    for (j = 0; j < DIM2; j++)
	cf->b[j] = (float)(100.*(j+1) + 0.01*j);

    for (j = 0; j < DIM3; j++)
	cf->c[j] = 100.*(j+1) + 0.02*j;


  /* Create data space */
  if((space=H5Screate(H5S_SCALAR))<0) goto error;

  /* Add  members to the compound data type */
  dimsa[0] = DIM1;
  dimsa[1] = DIM2;
  dimsa[2] = DIM3;
  dimsb[0] = DIM2;
  dimsc[0] = DIM3;

  /* Create the memory data type */
  if((ctype1 = H5Tcreate(H5T_COMPOUND, sizeof (CmpField)))<0) goto error;

  if((arr_type1 = H5Tarray_create(H5T_NATIVE_INT, 3, dimsa, NULL))<0) goto error;
  if((arr_type2 = H5Tarray_create(H5T_NATIVE_FLOAT, 1, dimsb, NULL))<0) goto error;
  if((arr_type3 = H5Tarray_create(H5T_NATIVE_DOUBLE, 1, dimsc, NULL))<0) goto error;

  if(H5Tinsert(ctype1, "A", HOFFSET(CmpField, a), arr_type1)<0) goto error;
  if(H5Tinsert (ctype1, "B", HOFFSET(CmpField, b), arr_type2)<0) goto error;
  if(H5Tinsert (ctype1, "C", HOFFSET(CmpField, c), arr_type3)<0) goto error;

  /* Create the dataset */
  if((dataset = H5Dcreate(fid, DSET_CONV_BUF_NAME, ctype1, space, H5P_DEFAULT))<0) goto error;
  if(H5Dwrite(dataset, ctype1, H5S_ALL, H5S_ALL, H5P_DEFAULT, cf)<0) goto error;

  if((ctype2 = H5Tcreate(H5T_COMPOUND, sizeof (CmpFieldR)))<0) goto error;

  if((arr_type4 = H5Tarray_create(H5T_NATIVE_FLOAT, 1, dimsb, NULL))<0) goto error;
  if((arr_type5 = H5Tarray_create(H5T_NATIVE_DOUBLE, 1, dimsc, NULL))<0) goto error;

  if(H5Tinsert (ctype2, "B", HOFFSET(CmpFieldR, b), arr_type4)<0) goto error;
  if(H5Tinsert (ctype2, "C", HOFFSET(CmpFieldR, c), arr_type5)<0) goto error;

  /* Read should succeed since library will set conversion buffer big enough */
  cfrR = (CmpFieldR *)calloc(1, sizeof(CmpFieldR));
  if(H5Dread(dataset, ctype2, H5S_ALL, H5S_ALL, H5P_DEFAULT, cfrR)<0) goto error;

  /* Read should fail since conversion buffer isn't big enough */
  xfer_list = H5Pcreate (H5P_DATASET_XFER);
  size = (DIM2*DIM3*(sizeof(int))+ DIM2*(sizeof(float))+
         DIM3*(sizeof(double)));
  if(H5Pset_buffer (xfer_list, size, NULL, NULL)<0) goto error;

  H5E_BEGIN_TRY {
    status = H5Dread(dataset, ctype2, H5S_ALL, H5S_ALL, xfer_list, cfrR);
  } H5E_END_TRY;
  if (status >= 0) {
      H5_FAILED();
      puts("    Library shouldn't allow conversion buffer too small");
      goto error;
  }

  /* Read will succeed since conversion buffer is big enough */
  size = (DIM1*DIM2*DIM3*(sizeof(int))+ DIM2*(sizeof(float))+
         DIM3*(sizeof(double)));
  if(H5Pset_buffer (xfer_list, size, NULL, NULL)<0) goto error;

  if(H5Dread(dataset, ctype2, H5S_ALL, H5S_ALL, xfer_list, cfrR)<0) goto error;


  if(H5Pclose(xfer_list)<0) goto error;
  if(H5Sclose(space)<0) goto error;
  if(H5Tclose(arr_type1)<0) goto error;
  if(H5Tclose(arr_type2)<0) goto error;
  if(H5Tclose(arr_type3)<0) goto error;
  if(H5Tclose(ctype1)<0) goto error;
  if(H5Tclose(ctype2)<0) goto error;
  if(H5Tclose(arr_type4)<0) goto error;
  if(H5Tclose(arr_type5)<0) goto error;
  if(H5Dclose(dataset)<0) goto error;

  if(cf)
    HDfree(cf);
  if(cfrR)
    HDfree(cfrR);
  puts(" PASSED");
  return(0);

error:
  return -1;
}


/*-------------------------------------------------------------------------
 * Function:	test_tconv
 *
 * Purpose:	Test some simple data type conversion stuff.
 *
 * Return:	Success:	0
 *
 *		Failure:	-1
 *
 * Programmer:	Robb Matzke
 *		Wednesday, January 14, 1998
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_tconv(hid_t file)
{
    char	*out=NULL, *in=NULL;
    int		i;
    hsize_t	dims[1];
    hid_t	space, dataset;

    out = malloc (4*1000000);
    assert (out);
    in = malloc (4*1000000);
    assert (in);

    TESTING("data type conversion");

    /* Initialize the dataset */
    for (i = 0; i < 1000000; i++) {
	out[i*4+0] = 0x11;
	out[i*4+1] = 0x22;
	out[i*4+2] = 0x33;
	out[i*4+3] = 0x44;
    }

    /* Create the data space */
    dims[0] = 1000000;
    if ((space = H5Screate_simple (1, dims, NULL))<0) goto error;

    /* Create the data set */
    if ((dataset = H5Dcreate(file, DSET_TCONV_NAME, H5T_STD_I32LE, space,
			     H5P_DEFAULT))<0) goto error;

    /* Write the data to the dataset */
    if (H5Dwrite(dataset, H5T_STD_I32LE, H5S_ALL, H5S_ALL, H5P_DEFAULT,
		 out)<0) goto error;

    /* Read data with byte order conversion */
    if (H5Dread(dataset, H5T_STD_I32BE, H5S_ALL, H5S_ALL, H5P_DEFAULT, in)<0)
	goto error;

    /* Check */
    for (i = 0; i < 1000000; i++) {
	if (in[4*i+0]!=out[4*i+3] ||
	    in[4*i+1]!=out[4*i+2] ||
	    in[4*i+2]!=out[4*i+1] ||
	    in[4*i+3]!=out[4*i+0]) {
	    H5_FAILED();
	    puts("    Read with byte order conversion failed.");
	    goto error;
	}
    }

    if (H5Dclose(dataset)<0) goto error;
    free (out);
    free (in);
    puts(" PASSED");
    return 0;

 error:
    return -1;
}

/* This message derives from H5Z */
const H5Z_class_t H5Z_BOGUS[1] = {{
    H5Z_CLASS_T_VERS,       /* H5Z_class_t version */
    H5Z_FILTER_BOGUS,		/* Filter id number		*/
    1, 1,               /* Encoding and decoding enabled */
    "bogus",			/* Filter name for debugging	*/
    NULL,                       /* The "can apply" callback     */
    NULL,                       /* The "set local" callback     */
    filter_bogus,		/* The actual filter function	*/
}};


/*-------------------------------------------------------------------------
 * Function:	can_apply_bogus
 *
 * Purpose:	A bogus 'can apply' callback that returns 0 for H5T_NATIVE_DOUBLE
 *              dataype, but returns 1 for all other datatypes
 *
 * Return:	Success:	Described above
 *		Failure:	0
 *
 * Programmer:	Quincey Koziol
 *              Friday, April  5, 2003
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
can_apply_bogus(hid_t UNUSED dcpl_id, hid_t type_id, hid_t UNUSED space_id)
{
    if(H5Tequal(type_id,H5T_NATIVE_DOUBLE))
        return 0;
    else
        return 1;
}


/*-------------------------------------------------------------------------
 * Function:	filter_bogus
 *
 * Purpose:	A bogus compression method that doesn't do anything.
 *
 * Return:	Success:	Data chunk size
 *
 *		Failure:	0
 *
 * Programmer:	Robb Matzke
 *              Tuesday, April 21, 1998
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static size_t
filter_bogus(unsigned int UNUSED flags, size_t UNUSED cd_nelmts,
      const unsigned int UNUSED *cd_values, size_t nbytes,
      size_t UNUSED *buf_size, void UNUSED **buf)
{
    return nbytes;
}


/*-------------------------------------------------------------------------
 * Function:	set_local_bogus2
 *
 * Purpose:	A 'set local' callback that stores the size of the datatype
 *              and adds it to all the H5T_NATIVE_INT values during
 *              filter operation.
 *
 * Return:	Success:	non-negative
 *		Failure:	negative
 *
 * Programmer:	Quincey Koziol
 *              Friday, April  5, 2003
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
set_local_bogus2(hid_t dcpl_id, hid_t type_id, hid_t UNUSED space_id)
{
    unsigned add_on=0;      /* Value to add to data going through */
    unsigned flags;         /* Filter flags */
    size_t cd_nelmts=BOGUS2_PERM_NPARMS;        /* Number of filter parameters */
    unsigned cd_values[4];  /* Filter parameters */

    /* Check for native integer datatype and set private property */
    if(H5Tequal(type_id,H5T_NATIVE_INT)>0)
        add_on=(unsigned)H5Tget_size(type_id);

    /* Get the filter's current parameters */
#ifdef H5_WANT_H5_V1_6_COMPAT
    if(H5Pget_filter_by_id(dcpl_id,H5Z_FILTER_BOGUS2,&flags,&cd_nelmts,
            cd_values,0,NULL)<0)
#else
    if(H5Pget_filter_by_id(dcpl_id,H5Z_FILTER_BOGUS2,&flags,&cd_nelmts,
            cd_values,0,NULL,NULL)<0)
#endif
        return(FAIL);

    /* Check that the parameter values were passed along correctly */
    if(cd_values[0]!=BOGUS2_PARAM_1)
        return(FAIL);
    if(cd_values[1]!=BOGUS2_PARAM_2)
        return(FAIL);

    /* Set "local" parameters for this dataset */
    cd_values[2]=(add_on>0);    /* Flag to indicate data is modified */
    cd_values[3]=add_on;        /* Amount the data was modified by */

    /* Modify the filter's parameters for this dataset */
    if(H5Pmodify_filter(dcpl_id, H5Z_FILTER_BOGUS2, flags, BOGUS2_ALL_NPARMS,
            cd_values)<0)
        return(FAIL);

    return(SUCCEED);
} /* end set_local_bogus2() */


/*-------------------------------------------------------------------------
 * Function:	filter_bogus2
 *
 * Purpose:	A filter method that adds a value to data values on writing
 *              (if the parameter is set), but does not modify data values on
 *              reading (so that correct operation of the filter can be
 *              checked).
 *
 * Return:	Success:	Data chunk size
 *		Failure:	0
 *
 * Programmer:	Quincey Koziol
 *              Monday, April  7, 2003
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static size_t
filter_bogus2(unsigned int flags, size_t cd_nelmts,
      const unsigned int *cd_values, size_t nbytes,
      size_t *buf_size, void **buf)
{
    /* Check for the correct number of parameters */
    if(cd_nelmts!=BOGUS2_ALL_NPARMS)
        return(0);

    /* Check that permanent parameters are set correctly */
    if(cd_values[0]!=BOGUS2_PARAM_1)
        return(0);
    if(cd_values[1]!=BOGUS2_PARAM_2)
        return(0);

    /* Check if this filter is supposed to do something */
    if(cd_values[2]>0) {
        /* Check whether we are "uncompressing" */
        if (flags & H5Z_FLAG_REVERSE) {
            /* Do nothing */
        } /* end if */
        /* "Compressing" */
        else {
            unsigned add_on=cd_values[3];   /* Get "add on" value */
            int *int_ptr=*buf;          /* Pointer to the data values */
            size_t buf_left=*buf_size;  /* Amount of data buffer left to process */

            /* Add the "add on" value to all the data values */
            while(buf_left>0) {
                *int_ptr++ += add_on;
                buf_left -= sizeof(int);
            } /* end while */
        } /* end else */

        return(nbytes);
    } /* end if */
    /* Filter is "no op" */
    else
        return(nbytes);
}

/* This message derives from H5Z */
const H5Z_class_t H5Z_CORRUPT[1] = {{
    H5Z_CLASS_T_VERS,            /* H5Z_class_t version */
    H5Z_FILTER_CORRUPT,		/* Filter id number		*/
    1, 1,               /* Encoding and decoding enabled */
    "corrupt",			/* Filter name for debugging	*/
    NULL,                       /* The "can apply" callback     */
    NULL,                       /* The "set local" callback     */
    filter_corrupt,		/* The actual filter function	*/
}};


/*-------------------------------------------------------------------------
 * Function:    filter_corrupt
 *
 * Purpose:     For testing Fletcher32 checksum.  modify data slightly during
 *              writing so that when data is read back, the checksum should
 *              fail.
 *
 * Return:	Success:	Data chunk size
 *
 *		Failure:	0
 *
 * Programmer:	Raymond Lu
 *              Jan 14, 2003
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static size_t
filter_corrupt(unsigned int flags, size_t cd_nelmts,
      const unsigned int *cd_values, size_t nbytes,
      size_t *buf_size, void **buf)
{
    size_t         ret_value = 0;
    unsigned char  *dst = (unsigned char*)(*buf);
    unsigned int   offset;
    unsigned int   length;
    unsigned int   value;
    void  *data;

    if (cd_nelmts!=3 || !cd_values)
        return 0;
    offset = cd_values[0];
    length = cd_values[1];
    value  = cd_values[2];
    if(offset>nbytes || (offset+length)>nbytes || length<sizeof(unsigned int))
        return 0;

    data = HDmalloc(length);
    HDmemset(data, (int)value, length);

    if (flags & H5Z_FLAG_REVERSE) { /* Varify data is actually corrupted during read */
        dst += offset;
        if(HDmemcmp(data, dst, length)!=0) return 0;
        *buf_size = nbytes;
        ret_value = nbytes;
    } else { /* Write corrupted data */
        dst += offset;
        HDmemcpy(dst, data, length);
        *buf_size = nbytes;
	ret_value = *buf_size;
    }

    if(data)
        HDfree(data);

    return ret_value;
}


/*-------------------------------------------------------------------------
 * Function:    filter_cb_cont
 *
 * Purpose:     Callback function to handle checksum failure.  Let it continue.
 *
 * Return:      continue
 *
 * Programmer:	Raymond Lu
 *              Jan 14, 2003
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static H5Z_cb_return_t
filter_cb_cont(H5Z_filter_t filter, void UNUSED *buf, size_t UNUSED buf_size,
           void UNUSED *op_data)
{
    if(H5Z_FILTER_FLETCHER32==filter)
       return H5Z_CB_CONT;
    else
        return H5Z_CB_FAIL;
}


/*-------------------------------------------------------------------------
 * Function:    filter_cb_fail
 *
 * Purpose:     Callback function to handle checksum failure.  Let it fail.
 *
 * Return:      fail
 *
 * Programmer:	Raymond Lu
 *              Jan 14, 2003
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static H5Z_cb_return_t
filter_cb_fail(H5Z_filter_t filter, void UNUSED *buf, size_t UNUSED buf_size,
           void UNUSED *op_data)
{
    if(H5Z_FILTER_FLETCHER32==filter)
       return H5Z_CB_FAIL;
    else
       return H5Z_CB_CONT;
}


/*-------------------------------------------------------------------------
 * Function:	test_filter_internal
 *
 * Purpose:	Tests dataset compression. If compression is requested when
 *		it hasn't been compiled into the library (such as when
 *		updating an existing compressed dataset) then data is sent to
 *		the file uncompressed but no errors are returned.
 *
 * Return:	Success:	0
 *		Failure:	-1
 *
 * Programmer:	Robb Matzke
 *              Wednesday, April 15, 1998
 *
 * Modifications:
 *              Moved out of main test_compression routine
 *              Quincey Koziol, November 14, 2002
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_filter_internal(hid_t fid, const char *name, hid_t dcpl, int if_fletcher32,
                     int corrupted, hsize_t *dset_size)
{
    hid_t		dataset;        /* Dataset ID */
    hid_t		dxpl;           /* Dataset xfer property list ID */
    hid_t		write_dxpl;     /* Dataset xfer property list ID for writing */
    hid_t		sid;            /* Dataspace ID */
    const hsize_t	size[2] = {DSET_DIM1, DSET_DIM2};           /* Dataspace dimensions */
    const hsize_t	hs_offset[2] = {FILTER_HS_OFFSET1, FILTER_HS_OFFSET2}; /* Hyperslab offset */
    const hsize_t	hs_size[2] = {FILTER_HS_SIZE1, FILTER_HS_SIZE2};   /* Hyperslab size */
    void		*tconv_buf = NULL;      /* Temporary conversion buffer */
    hsize_t		i, j, n;        /* Local index variables */
    herr_t              status;         /* Error status */

    /* Create the data space */
    if ((sid = H5Screate_simple(2, size, NULL))<0) goto error;

    /*
     * Create a small conversion buffer to test strip mining. We
     * might as well test all we can!
     */
    if ((dxpl = H5Pcreate (H5P_DATASET_XFER))<0) goto error;
    tconv_buf = malloc (1000);
    if (H5Pset_buffer (dxpl, (size_t)1000, tconv_buf, NULL)<0) goto error;
    if ((write_dxpl = H5Pcopy (dxpl))<0) TEST_ERROR;

    if (if_fletcher32==DISABLE_FLETCHER32) {
        if(H5Pset_edc_check(dxpl, H5Z_DISABLE_EDC)<0)
            goto error;
        if(H5Z_DISABLE_EDC != H5Pget_edc_check(dxpl))
            goto error;
    }

    TESTING("    filters (setup)");

    /* Check if all the filters are available */
    if(H5Pall_filters_avail(dcpl)!=TRUE) {
        H5_FAILED();
        printf("    Line %d: Incorrect filter availability\n",__LINE__);
        goto error;
    } /* end if */

    /* Create the dataset */
    if ((dataset = H5Dcreate(fid, name, H5T_NATIVE_INT, sid,
			     dcpl))<0) goto error;
    PASSED();

    /*----------------------------------------------------------------------
     * STEP 1: Read uninitialized data.  It should be zero.
     *----------------------------------------------------------------------
     */
    TESTING("    filters (uninitialized read)");

    if (H5Dread (dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check)<0)
	goto error;

    for (i=0; i<size[0]; i++) {
	for (j=0; j<size[1]; j++) {
	    if (0!=check[i][j]) {
		H5_FAILED();
		printf("    Read a non-zero value.\n");
		printf("    At index %lu,%lu\n",
		       (unsigned long)i, (unsigned long)j);
		goto error;
	    }
	}
    }
    PASSED();

    /*----------------------------------------------------------------------
     * STEP 2: Test filters by setting up a chunked dataset and writing
     * to it.
     *----------------------------------------------------------------------
     */
    TESTING("    filters (write)");

    for (i=n=0; i<size[0]; i++) {
	for (j=0; j<size[1]; j++) {
	    points[i][j] = (int)(n++);
	}
    }

    if (H5Dwrite(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, write_dxpl, points)<0)
	TEST_ERROR;

    if((*dset_size=H5Dget_storage_size(dataset))==0) TEST_ERROR;

    PASSED();

    /*----------------------------------------------------------------------
     * STEP 3: Try to read the data we just wrote.
     *----------------------------------------------------------------------
     */
    TESTING("    filters (read)");

    /* Read the dataset back */
    if(corrupted) {
        /* Default behavior is failure when data is corrupted. */
        /* (Use the "write" DXPL in order to make certain corruption is seen) */
        H5E_BEGIN_TRY {
            status=H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, write_dxpl, check);
        } H5E_END_TRY;
        if(status>=0) TEST_ERROR;

        /* Callback decides to continue inspite data is corrupted. */
        if(H5Pset_filter_callback(dxpl, filter_cb_cont, NULL)<0) TEST_ERROR;
        if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check)<0)
            TEST_ERROR;

        /* Callback decides to fail when data is corrupted. */
        if(H5Pset_filter_callback(write_dxpl, filter_cb_fail, NULL)<0) TEST_ERROR;
        /* (Use the "write" DXPL in order to make certain corruption is seen) */
        H5E_BEGIN_TRY {
            status=H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, write_dxpl, check);
        } H5E_END_TRY;
        if(status>=0) TEST_ERROR;
    } else {
        if (H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check)<0)
	   TEST_ERROR;

        /* Check that the values read are the same as the values written */
        for (i=0; i<size[0]; i++) {
	   for (j=0; j<size[1]; j++) {
	       if (points[i][j] != check[i][j]) {
		  H5_FAILED();
		  fprintf(stderr,"    Read different values than written.\n");
		  fprintf(stderr,"    At index %lu,%lu\n", (unsigned long)i, (unsigned long)j);
		  fprintf(stderr,"    At original: %d\n", (int)points[i][j]);
		  fprintf(stderr,"    At returned: %d\n", (int)check[i][j]);
		  goto error;
	       }
	   }
        }
    }

    PASSED();

    /*----------------------------------------------------------------------
     * STEP 4: Write new data over the top of the old data.  The new data is
     * random thus not very compressible, and will cause the chunks to move
     * around as they grow.  We only change values for the left half of the
     * dataset although we rewrite the whole thing.
     *----------------------------------------------------------------------
     */
    TESTING("    filters (modify)");

    for (i=0; i<size[0]; i++) {
	for (j=0; j<size[1]/2; j++) {
	    points[i][j] = (int)HDrandom ();
	}
    }
    if (H5Dwrite (dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, write_dxpl, points)<0)
	TEST_ERROR;

    if(corrupted) {
        /* Default behavior is failure when data is corrupted. */
        /* (Use the "write" DXPL in order to make certain corruption is seen) */
        H5E_BEGIN_TRY {
            status=H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, write_dxpl, check);
        } H5E_END_TRY;
        if(status>=0) TEST_ERROR;

        /* Callback decides to continue inspite data is corrupted. */
        if(H5Pset_filter_callback(dxpl, filter_cb_cont, NULL)<0) TEST_ERROR;
        if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check)<0)
            TEST_ERROR;

        /* Callback decides to fail when data is corrupted. */
        if(H5Pset_filter_callback(write_dxpl, filter_cb_fail, NULL)<0) TEST_ERROR;
        /* (Use the "write" DXPL in order to make certain corruption is seen) */
        H5E_BEGIN_TRY {
            status=H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, write_dxpl, check);
        } H5E_END_TRY;
        if(status>=0) TEST_ERROR;
    } else {
        /* Read the dataset back and check it */
        if (H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check)<0)
	   TEST_ERROR;

        /* Check that the values read are the same as the values written */
        for (i=0; i<size[0]; i++) {
	   for (j=0; j<size[1]; j++) {
	       if (points[i][j] != check[i][j]) {
		  H5_FAILED();
		  printf("    Read different values than written.\n");
		  printf("    At index %lu,%lu\n",
		           (unsigned long)i, (unsigned long)j);
		  goto error;
	       }
	   }
        }
    }

    if((*dset_size=H5Dget_storage_size(dataset))==0) TEST_ERROR;
    PASSED();

    /*----------------------------------------------------------------------
     * STEP 5: Close the dataset and then open it and read it again.  This
     * insures that the filters message is picked up properly from the
     * object header.
     *----------------------------------------------------------------------
     */
    TESTING("    filters (re-open)");

    if (H5Dclose (dataset)<0) TEST_ERROR;
    if ((dataset = H5Dopen (fid, name))<0) TEST_ERROR;

    if(corrupted) {
        /* Default behavior is failure when data is corrupted. */
        /* (Use the "write" DXPL in order to make certain corruption is seen) */
        H5E_BEGIN_TRY {
            status=H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, write_dxpl, check);
        } H5E_END_TRY;
        if(status>=0) TEST_ERROR;

        /* Callback decides to continue inspite data is corrupted. */
        if(H5Pset_filter_callback(dxpl, filter_cb_cont, NULL)<0) TEST_ERROR;
        if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check)<0)
            TEST_ERROR;

        /* Callback decides to fail when data is corrupted. */
        if(H5Pset_filter_callback(write_dxpl, filter_cb_fail, NULL)<0) TEST_ERROR;
        /* (Use the "write" DXPL in order to make certain corruption is seen) */
        H5E_BEGIN_TRY {
            status=H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, write_dxpl, check);
        } H5E_END_TRY;
        if(status>=0) TEST_ERROR;
    } else {
        if (H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check)<0)
	   TEST_ERROR;

        /* Check that the values read are the same as the values written */
        for (i=0; i<size[0]; i++) {
	   for (j=0; j<size[1]; j++) {
	       if (points[i][j] != check[i][j]) {
		  H5_FAILED();
		  printf("    Read different values than written.\n");
		  printf("    At index %lu,%lu\n",
		        (unsigned long)i, (unsigned long)j);
		  goto error;
	       }
	   }
        }
    }

    PASSED();


    /*----------------------------------------------------------------------
     * STEP 6: Test partial I/O by writing to and then reading from a
     * hyperslab of the dataset.  The hyperslab does not line up on chunk
     * boundaries (we know that case already works from above tests).
     *----------------------------------------------------------------------
     */
    TESTING("    filters (partial I/O)");

    for (i=0; i<hs_size[0]; i++) {
	for (j=0; j<hs_size[1]; j++) {
	    points[hs_offset[0]+i][hs_offset[1]+j] = (int)HDrandom();
	}
    }
    if (H5Sselect_hyperslab(sid, H5S_SELECT_SET, hs_offset, NULL, hs_size,
			    NULL)<0) TEST_ERROR;
    /* (Use the "read" DXPL because partial I/O on corrupted data test needs to ignore errors during writing) */
    if (H5Dwrite (dataset, H5T_NATIVE_INT, sid, sid, dxpl, points)<0)
	TEST_ERROR;

    if(corrupted) {
        /* Default behavior is failure when data is corrupted. */
        /* (Use the "write" DXPL in order to make certain corruption is seen) */
        H5E_BEGIN_TRY {
            status=H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, write_dxpl, check);
        } H5E_END_TRY;
        if(status>=0) TEST_ERROR;

        /* Callback decides to continue inspite data is corrupted. */
        if(H5Pset_filter_callback(dxpl, filter_cb_cont, NULL)<0) TEST_ERROR;
        if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check)<0)
            TEST_ERROR;

        /* Callback decides to fail when data is corrupted. */
        if(H5Pset_filter_callback(write_dxpl, filter_cb_fail, NULL)<0) TEST_ERROR;
        /* (Use the "write" DXPL in order to make certain corruption is seen) */
        H5E_BEGIN_TRY {
            status=H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, write_dxpl, check);
        } H5E_END_TRY;
        if(status>=0) TEST_ERROR;
    } else {
        if (H5Dread (dataset, H5T_NATIVE_INT, sid, sid, dxpl, check)<0)
	   TEST_ERROR;

        /* Check that the values read are the same as the values written */
        for (i=0; i<hs_size[0]; i++) {
	   for (j=0; j<hs_size[1]; j++) {
	       if (points[hs_offset[0]+i][hs_offset[1]+j] !=
                      check[hs_offset[0]+i][hs_offset[1]+j]) {
		  H5_FAILED();
		  fprintf(stderr,"    Read different values than written.\n");
		  fprintf(stderr,"    At index %lu,%lu\n",
		         (unsigned long)(hs_offset[0]+i),
		         (unsigned long)(hs_offset[1]+j));
		  fprintf(stderr,"    At original: %d\n",
		         (int)points[hs_offset[0]+i][hs_offset[1]+j]);
		  fprintf(stderr,"    At returned: %d\n",
		         (int)check[hs_offset[0]+i][hs_offset[1]+j]);
		  goto error;
	       }
	   }
        }
    }

    PASSED();

    /* Get the storage size of the dataset */
    if((*dset_size=H5Dget_storage_size(dataset))==0) goto error;
    /* Clean up objects used for this test */
    if (H5Dclose (dataset)<0) goto error;
    if (H5Sclose (sid)<0) goto error;
    if (H5Pclose (dxpl)<0) goto error;
    free (tconv_buf);

    return(0);

error:
    if(tconv_buf)
        free (tconv_buf);
    return -1;
}

/*-------------------------------------------------------------------------
 * Function:	test_filter_noencoder
 *
 * Purpose:	Tests filters with no encoder present.  Ensures that data
 *			can still be decoded correctly and that errors are thrown
 *			when the application tries to write.
 *
 * Return:	Success:	0
 *		Failure:	-1
 *
 * Programmer:	Nat Furrer and James Laird
 *              Monday, June 7, 2004
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
#ifdef H5_HAVE_FILTER_SZIP
static herr_t
test_filter_noencoder(const char *dset_name)
{
    hid_t file_id = -1;
    hid_t dset_id = -1;
    hid_t test_dset_id = -1;
    hid_t dcpl_id = -1;
    hid_t space_id = -1;
    hsize_t dims = 10;
    herr_t err;
    int test_ints[10] = { 12 };
    int read_buf[10];
    int i;
    char * srcdir = HDgetenv("srcdir"); /* The source directory */
    char testfile[512]="";	/* Buffer to hold name of test file */

    /*
     * Create the name of the file to open (in case we are using the --srcdir
     * option and the file is in a different directory from this test).
     */
    if (srcdir && ((HDstrlen(srcdir) + HDstrlen(NOENCODER_FILENAME) + 1) < sizeof(testfile)) )
    {
        HDstrcpy(testfile, srcdir);
        HDstrcat(testfile, "/");
    }
    HDstrcat(testfile, NOENCODER_FILENAME);

    file_id = H5Fopen(testfile, H5F_ACC_RDWR, H5P_DEFAULT);
    if (file_id < 0) goto error;

    dset_id = H5Dopen(file_id, dset_name);
    if (dset_id < 0) goto error;

    space_id = H5Screate_simple(1, &dims, NULL);
    if (space_id < 0) goto error;

    TESTING("    decoding without encoder");

    /* Read the dataset and make sure the decoder is working correctly */
    err = H5Dread(dset_id, H5T_NATIVE_INT, space_id, space_id, H5P_DEFAULT, read_buf);
    if (err < 0) goto error;

    for(i = 0; i < 10; i++)
            if ( read_buf[i] != i ) goto error;

    H5Sclose(space_id);

    PASSED();

    /* Attempt to copy the DCPL and use it to create a new dataset.
     * Since the filter does not have an encoder, the creation
     * should fail.
     */
    TESTING("    trying to write without encoder");

    dcpl_id = H5Dget_create_plist(dset_id);
    if (dcpl_id < 0) goto error;

    space_id = H5Screate_simple(1, &dims, NULL);
    if (space_id < 0) goto error;

    H5E_BEGIN_TRY{
    test_dset_id = H5Dcreate(file_id, NOENCODER_TEST_DATASET, H5T_NATIVE_INT, space_id , dcpl_id);
    }H5E_END_TRY

    if (test_dset_id >= 0) goto error;

    /* Attempt to extend the dataset.  This should fail because
     * the dataset has a fill value and is instructed to fill on
     * allocation.
     */
    dims = 20; /* Dataset is originally of size 10 */
    H5E_BEGIN_TRY{
    err = H5Dextend(dset_id, &dims);
    }H5E_END_TRY

    if (err >= 0) goto error;

    /* Attempt to write to the dataset.  This should fail because
     * the filter does not have an encoder.
     */
    H5E_BEGIN_TRY{
    err = H5Dwrite(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, test_ints);
    }H5E_END_TRY

    if (err >= 0) goto error;

    H5Fclose(file_id);
    H5Dclose(dset_id);
    H5Sclose(space_id);
    H5Pclose(dcpl_id);

    PASSED();

    return 0;

error:
    H5_FAILED();
    if (dset_id != -1)
            H5Dclose(dset_id);
    if (test_dset_id != -1)
            H5Dclose(test_dset_id);
    if (space_id != -1)
            H5Sclose(space_id);
    if (dcpl_id != -1)
            H5Pclose(dcpl_id);
    if (file_id != -1)
            H5Fclose(file_id);
    return -1;
}
#endif /* H5_HAVE_FILTER_SZIP */

/*-------------------------------------------------------------------------
 * Function:    test_get_filter_info
 *
 * Purpose:     Tests the H5Zget_filter_info function.
 *
 * Return:      Success:        0
 *              Failure:        -1
 *
 * Programmer:  Nat Furrer and James Laird
 *              Thursday, June 10, 2004
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_get_filter_info(void)
{
  unsigned int flags;  /* flags returned from H5Zget_filter_info */
  herr_t err;

  TESTING("H5Zget_filter_info");

  /* Verify that each filter is reported as having the right combination
   * of encoder and decoder.
   */
#ifdef H5_HAVE_FILTER_FLETCHER32
  if(H5Zget_filter_info(H5Z_FILTER_FLETCHER32, &flags) < 0) TEST_ERROR

  if(((flags & H5Z_FILTER_CONFIG_ENCODE_ENABLED) == 0) ||
     ((flags & H5Z_FILTER_CONFIG_DECODE_ENABLED) == 0))
      TEST_ERROR
#endif

#ifdef H5_HAVE_FILTER_SHUFFLE
  if(H5Zget_filter_info(H5Z_FILTER_SHUFFLE, &flags) < 0) TEST_ERROR

  if(((flags & H5Z_FILTER_CONFIG_ENCODE_ENABLED) == 0) ||
     ((flags & H5Z_FILTER_CONFIG_DECODE_ENABLED) == 0))
      TEST_ERROR
#endif

#ifdef H5_HAVE_FILTER_DEFLATE
  if(H5Zget_filter_info(H5Z_FILTER_DEFLATE, &flags) < 0) TEST_ERROR

  if(((flags & H5Z_FILTER_CONFIG_ENCODE_ENABLED) == 0) ||
     ((flags & H5Z_FILTER_CONFIG_DECODE_ENABLED) == 0))
      TEST_ERROR
#endif

#ifdef H5_HAVE_FILTER_SZIP
    if(H5Zget_filter_info(H5Z_FILTER_SZIP, &flags) < 0) TEST_ERROR

    if(SZ_encoder_enabled()) {
        if(((flags & H5Z_FILTER_CONFIG_ENCODE_ENABLED) == 0) ||
                ((flags & H5Z_FILTER_CONFIG_DECODE_ENABLED) == 0))
            TEST_ERROR
    } /* end if */
    else {
        if(((flags & H5Z_FILTER_CONFIG_ENCODE_ENABLED) != 0) ||
                ((flags & H5Z_FILTER_CONFIG_DECODE_ENABLED) == 0))
            TEST_ERROR
    } /* end else */
#endif /* H5_HAVE_FILTER_SZIP */

  /* Verify that get_filter_info throws an error when given a bad filter */
  /* (Depends on 1.6 compatibility flag) */
#ifdef H5_WANT_H5_V1_6_COMPAT
  if (H5Zget_filter_info(-1, &flags) < 0) TEST_ERROR
  if (flags != 0) TEST_ERROR
#else /* H5_WANT_H5_V1_6_COMPAT */
  H5E_BEGIN_TRY {
    err = H5Zget_filter_info(-1, &flags);
  } H5E_END_TRY;
  if (err >= 0) TEST_ERROR
#endif /* H5_WANT_H5_V1_6_COMPAT */

  PASSED();
  return 0;

error:
  return -1;
}

/*-------------------------------------------------------------------------
 * Function:	test_filters
 *
 * Purpose:	Tests dataset filter.
 *
 * Return:	Success:	0
 *		Failure:	-1
 *
 * Programmer:	Robb Matzke
 *              Wednesday, April 15, 1998
 *
 * Modifications:
 *              Moved guts of filter testing out of main routine.
 *              Tests shuffle, deflate, fletcher32 checksum filters.
 *              Quincey Koziol, November 14, 2002
 *
 *              Added Fletcher32 filter testing
 *              Raymond Lu, Jan 22, 2002
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_filters(hid_t file)
{
    hid_t	dc;                 /* Dataset creation property list ID */
    const hsize_t chunk_size[2] = {FILTER_CHUNK_DIM1, FILTER_CHUNK_DIM2};  /* Chunk dimensions */
    hsize_t     null_size;          /* Size of dataset with null filter */

#ifdef H5_HAVE_FILTER_FLETCHER32
    hsize_t     fletcher32_size;       /* Size of dataset with Fletcher32 checksum */
    unsigned    data_corrupt[3];     /* position and length of data to be corrupted */
#endif /* H5_HAVE_FILTER_FLETCHER32 */

#ifdef H5_HAVE_FILTER_DEFLATE
    hsize_t     deflate_size;       /* Size of dataset with deflate filter */
#endif /* H5_HAVE_FILTER_DEFLATE */

#ifdef H5_HAVE_FILTER_SZIP
    hsize_t     szip_size;       /* Size of dataset with szip filter */
    unsigned szip_options_mask=H5_SZIP_NN_OPTION_MASK;
    unsigned szip_pixels_per_block=4;
#endif /* H5_HAVE_FILTER_SZIP */

#ifdef H5_HAVE_FILTER_SHUFFLE
    hsize_t     shuffle_size;       /* Size of dataset with shuffle filter */
#endif /* H5_HAVE_FILTER_SHUFFLE */

#if (defined H5_HAVE_FILTER_DEFLATE | defined H5_HAVE_FILTER_SZIP) && defined H5_HAVE_FILTER_SHUFFLE && defined H5_HAVE_FILTER_FLETCHER32
    hsize_t     combo_size;     /* Size of dataset with shuffle+deflate filter */
#endif /* H5_HAVE_FILTER_DEFLATE && H5_HAVE_FILTER_SHUFFLE && H5_HAVE_FILTER_FLETCHER32 */

    /* test the H5Zget_filter_info function */
    if(test_get_filter_info() < 0) goto error;

    /*----------------------------------------------------------
     * STEP 0: Test null I/O filter by itself.
     *----------------------------------------------------------
     */
    puts("Testing 'null' filter");
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk (dc, 2, chunk_size)<0) goto error;
    if (H5Zregister (H5Z_BOGUS)<0) goto error;
    if (H5Pset_filter (dc, H5Z_FILTER_BOGUS, 0, 0, NULL)<0) goto error;

    if(test_filter_internal(file,DSET_BOGUS_NAME,dc,DISABLE_FLETCHER32,DATA_NOT_CORRUPTED,&null_size)<0) goto error;

    /* Clean up objects used for this test */
    if (H5Pclose (dc)<0) goto error;

    /*----------------------------------------------------------
     * STEP 1: Test Fletcher32 Checksum by itself.
     *----------------------------------------------------------
     */
#ifdef H5_HAVE_FILTER_FLETCHER32
    puts("Testing Fletcher32 checksum(enabled for read)");
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk (dc, 2, chunk_size)<0) goto error;
    if (H5Pset_filter (dc,H5Z_FILTER_FLETCHER32,0,0,NULL)<0) goto error;

    /* Enable checksum during read */
    if(test_filter_internal(file,DSET_FLETCHER32_NAME,dc,ENABLE_FLETCHER32,DATA_NOT_CORRUPTED,&fletcher32_size)<0) goto error;
    if(fletcher32_size<=null_size) {
        H5_FAILED();
        puts("    Size after checksumming is incorrect.");
        goto error;
    } /* end if */

    /* Disable checksum during read */
    puts("Testing Fletcher32 checksum(disabled for read)");
    if(test_filter_internal(file,DSET_FLETCHER32_NAME_2,dc,DISABLE_FLETCHER32,DATA_NOT_CORRUPTED,&fletcher32_size)<0) goto error;
    if(fletcher32_size<=null_size) {
        H5_FAILED();
        puts("    Size after checksumming is incorrect.");
        goto error;
    } /* end if */

    /* Try to corrupt data and see if checksum fails */
    puts("Testing Fletcher32 checksum(when data is corrupted)");
    data_corrupt[0] = 52;
    data_corrupt[1] = 33;
    data_corrupt[2] = 27;

    if (H5Zregister (H5Z_CORRUPT)<0) goto error;
    if (H5Pset_filter (dc, H5Z_FILTER_CORRUPT, 0, 3, data_corrupt)<0) goto error;
    if(test_filter_internal(file,DSET_FLETCHER32_NAME_3,dc,DISABLE_FLETCHER32,DATA_CORRUPTED,&fletcher32_size)<0) goto error;
    if(fletcher32_size<=null_size) {
        H5_FAILED();
        puts("    Size after checksumming is incorrect.");
        goto error;
    } /* end if */

    /* Clean up objects used for this test */
    if (H5Pclose (dc)<0) goto error;
#else /* H5_HAVE_FILTER_FLETCHER32 */
    TESTING("fletcher32 checksum");
    SKIPPED();
    puts("    Fletcher32 checksum not enabled");
#endif /* H5_HAVE_FILTER_FLETCHER32 */

    /*----------------------------------------------------------
     * STEP 2: Test deflation by itself.
     *----------------------------------------------------------
     */
#ifdef H5_HAVE_FILTER_DEFLATE
    puts("Testing deflate filter");
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk (dc, 2, chunk_size)<0) goto error;
    if (H5Pset_deflate (dc, 6)<0) goto error;

    if(test_filter_internal(file,DSET_DEFLATE_NAME,dc,DISABLE_FLETCHER32,DATA_NOT_CORRUPTED,&deflate_size)<0) goto error;
    /* Clean up objects used for this test */
    if (H5Pclose (dc)<0) goto error;
#else /* H5_HAVE_FILTER_DEFLATE */
    TESTING("deflate filter");
    SKIPPED();
    puts("    Deflate filter not enabled");
#endif /* H5_HAVE_FILTER_DEFLATE */

    /*----------------------------------------------------------
     * STEP 3: Test szip compression by itself.
     *----------------------------------------------------------
     */
#ifdef H5_HAVE_FILTER_SZIP
    TESTING("szip filter (with encoder)");
    if ( h5_szip_can_encode() == 1) {
        if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
        if (H5Pset_chunk (dc, 2, chunk_size)<0) goto error;

	puts("");
	if (H5Pset_szip(dc, szip_options_mask, szip_pixels_per_block)<0) goto error;
	if(test_filter_internal(file,DSET_SZIP_NAME,dc,DISABLE_FLETCHER32,DATA_NOT_CORRUPTED,&szip_size)<0) goto error;
        if (H5Pclose (dc)<0) goto error;
    } else {
	SKIPPED();
    }

    TESTING("szip filter (without encoder)");

    if ( h5_szip_can_encode() != 1) {
	puts("");
	if(test_filter_noencoder(NOENCODER_SZIP_DATASET) < 0) goto error;
    } else {
	SKIPPED();
    }

#else /* H5_HAVE_FILTER_SZIP */
    TESTING("szip filter");
    SKIPPED();
    puts("    Szip filter not enabled");
#endif /* H5_HAVE_FILTER_SZIP */

    /*----------------------------------------------------------
     * STEP 4: Test shuffling by itself.
     *----------------------------------------------------------
     */
#ifdef H5_HAVE_FILTER_SHUFFLE
    puts("Testing shuffle filter");
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk (dc, 2, chunk_size)<0) goto error;
    if (H5Pset_shuffle (dc)<0) goto error;

    if(test_filter_internal(file,DSET_SHUFFLE_NAME,dc,DISABLE_FLETCHER32,DATA_NOT_CORRUPTED,&shuffle_size)<0) goto error;
    if(shuffle_size!=null_size) {
        H5_FAILED();
        puts("    Shuffled size not the same as uncompressed size.");
        goto error;
    } /* end if */

    /* Clean up objects used for this test */
    if (H5Pclose (dc)<0) goto error;
#else /* H5_HAVE_FILTER_SHUFFLE */
    TESTING("shuffle filter");
    SKIPPED();
    puts("    Shuffle filter not enabled");
#endif /* H5_HAVE_FILTER_SHUFFLE */

    /*----------------------------------------------------------
     * STEP 5: Test shuffle + deflate + checksum in any order.
     *----------------------------------------------------------
     */
#if defined H5_HAVE_FILTER_DEFLATE && defined H5_HAVE_FILTER_SHUFFLE && defined H5_HAVE_FILTER_FLETCHER32
    puts("Testing shuffle+deflate+checksum filters(checksum first)");
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk (dc, 2, chunk_size)<0) goto error;
    if (H5Pset_fletcher32 (dc)<0) goto error;
    if (H5Pset_shuffle (dc)<0) goto error;
    if (H5Pset_deflate (dc, 6)<0) goto error;

    if(test_filter_internal(file,DSET_SHUF_DEF_FLET_NAME,dc,ENABLE_FLETCHER32,DATA_NOT_CORRUPTED,&combo_size)<0) goto error;

    /* Clean up objects used for this test */
    if (H5Pclose (dc)<0) goto error;

    puts("Testing shuffle+deflate+checksum filters(checksum last)");
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk (dc, 2, chunk_size)<0) goto error;
    if (H5Pset_shuffle (dc)<0) goto error;
    if (H5Pset_deflate (dc, 6)<0) goto error;
    if (H5Pset_fletcher32 (dc)<0) goto error;

    if(test_filter_internal(file,DSET_SHUF_DEF_FLET_NAME_2,dc,ENABLE_FLETCHER32,DATA_NOT_CORRUPTED,&combo_size)<0) goto error;

    /* Clean up objects used for this test */
    if (H5Pclose (dc)<0) goto error;
#else /* H5_HAVE_FILTER_DEFLATE && H5_HAVE_FILTER_SHUFFLE && H5_HAVE_FILTER_FLETCHER32 */
    TESTING("shuffle+deflate+fletcher32 filters");
    SKIPPED();
    puts("    Deflate, shuffle, or fletcher32 checksum filter not enabled");
#endif /* H5_HAVE_FILTER_DEFLATE && H5_HAVE_FILTER_SHUFFLE && H5_HAVE_FILTER_FLETCHER32 */

    /*----------------------------------------------------------
     * STEP 6: Test shuffle + szip + checksum in any order.
     *----------------------------------------------------------
     */
#if defined H5_HAVE_FILTER_SZIP && defined H5_HAVE_FILTER_SHUFFLE && defined H5_HAVE_FILTER_FLETCHER32

    TESTING("shuffle+szip+checksum filters(checksum first, with encoder)");
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk (dc, 2, chunk_size)<0) goto error;
    if (H5Pset_fletcher32 (dc)<0) goto error;
    if (H5Pset_shuffle (dc)<0) goto error;

	/* Make sure encoding is enabled */
    if ( h5_szip_can_encode() == 1) {
	puts("");
	if (H5Pset_szip(dc, szip_options_mask, szip_pixels_per_block)<0) goto error;
	if(test_filter_internal(file,DSET_SHUF_SZIP_FLET_NAME,dc,ENABLE_FLETCHER32,DATA_NOT_CORRUPTED,&combo_size)<0) goto error;
    } else {
		SKIPPED();
    }

    TESTING("shuffle+szip+checksum filters(checksum first, without encoder)");

    if ( h5_szip_can_encode() != 1) {
	puts("");
	if (test_filter_noencoder(NOENCODER_SZIP_SHUFF_FLETCH_DATASET) < 0) goto error;
    } else {
		SKIPPED();
    }

    /* Clean up objects used for this test */
    if (H5Pclose (dc)<0) goto error;

    TESTING("shuffle+szip+checksum filters(checksum last, with encoder)");

    /* Make sure encoding is enabled */
    if ( h5_szip_can_encode() == 1) {
	puts("");
	if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
	if (H5Pset_chunk (dc, 2, chunk_size)<0) goto error;
	if (H5Pset_shuffle (dc)<0) goto error;
	if (H5Pset_szip(dc, szip_options_mask, szip_pixels_per_block)<0) goto error;
	if (H5Pset_fletcher32 (dc)<0) goto error;

	if(test_filter_internal(file,DSET_SHUF_SZIP_FLET_NAME_2,dc,ENABLE_FLETCHER32,DATA_NOT_CORRUPTED,&combo_size)<0) goto error;

	/* Clean up objects used for this test */
	if (H5Pclose (dc)<0) goto error;

    } else {
	SKIPPED();
    }

#else /* H5_HAVE_FILTER_SZIP && H5_HAVE_FILTER_SHUFFLE && H5_HAVE_FILTER_FLETCHER32 */
    TESTING("shuffle+szip+fletcher32 filters");
    SKIPPED();
    puts("    Szip, shuffle, or fletcher32 checksum filter not enabled");
#endif /* H5_HAVE_FILTER_SZIP && H5_HAVE_FILTER_SHUFFLE && H5_HAVE_FILTER_FLETCHER32 */
    return 0;

error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:	test_missing_filter
 *
 * Purpose:	Tests library behavior when filter is missing
 *
 * Return:	Success:	0
 *		Failure:	-1
 *
 * Programmer:	Quincey Koziol
 *              Thursday, November 14, 2002
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_missing_filter(hid_t file)
{
    hid_t       fid;            /* File ID */
    hid_t       dsid;           /* Dataset ID */
    hid_t       sid;            /* Dataspace ID */
    hid_t       dcpl;           /* Dataspace creation property list ID */
    const hsize_t dims[2] = {DSET_DIM1, DSET_DIM2};         /* Dataspace dimensions */
    const hsize_t chunk_dims[2] = {2, 25};      /* Chunk dimensions */
    hsize_t     dset_size;      /* Dataset size */
    hsize_t     i,j;            /* Local index variables */
    herr_t      ret;            /* Generic return value */
    char testfile[512]="";      /* Buffer to hold name of existing test file */
    char *srcdir = HDgetenv("srcdir");    /* The source directory, if we are using the --srcdir configure option */

    TESTING("dataset access with missing filter");

    /* Unregister the deflate filter */
#ifdef H5_HAVE_FILTER_DEFLATE
        /* Verify deflate filter is registered currently */
        if(H5Zfilter_avail(H5Z_FILTER_DEFLATE)!=TRUE) {
            H5_FAILED();
            printf("    Line %d: Deflate filter not available\n",__LINE__);
            goto error;
        } /* end if */

        /* Unregister deflate filter (use internal function) */
        if (H5Z_unregister(H5Z_FILTER_DEFLATE)<0) {
            H5_FAILED();
            printf("    Line %d: Can't unregister deflate filter\n",__LINE__);
            goto error;
        } /* end if */
#endif /* H5_HAVE_FILTER_DEFLATE */
        /* Verify deflate filter is not registered currently */
        if(H5Zfilter_avail(H5Z_FILTER_DEFLATE)!=FALSE) {
            H5_FAILED();
            printf("    Line %d: Deflate filter available\n",__LINE__);
            goto error;
        } /* end if */

    /* Create dcpl with deflate filter */
    if((dcpl = H5Pcreate(H5P_DATASET_CREATE))<0) {
        H5_FAILED();
        printf("    Line %d: Can't create dcpl\n",__LINE__);
        goto error;
    } /* end if */
    if(H5Pset_chunk(dcpl, 2, chunk_dims)<0) {
        H5_FAILED();
        printf("    Line %d: Can't set chunk sizes\n",__LINE__);
        goto error;
    } /* end if */
    if(H5Pset_deflate(dcpl, 9)<0) {
        H5_FAILED();
        printf("    Line %d: Can't set deflate filter\n",__LINE__);
        goto error;
    } /* end if */

    /* Check if all the filters are available */
    ret=H5Pall_filters_avail(dcpl);
    if(ret<0) {
        H5_FAILED();
        printf("    Line %d: Can't check filter availability\n",__LINE__);
        goto error;
    } /* end if */
    if(ret!=FALSE) {
        H5_FAILED();
        printf("    Line %d: Filter shouldn't be available\n",__LINE__);
        goto error;
    } /* end if */

    /* Create the data space */
    if ((sid = H5Screate_simple(2, dims, NULL))<0) {
        H5_FAILED();
        printf("    Line %d: Can't open dataspace\n",__LINE__);
        goto error;
    } /* end if */

    /* Create new dataset */
    if ((dsid = H5Dcreate(file, DSET_MISSING_NAME, H5T_NATIVE_INT, sid, dcpl))<0) {
        H5_FAILED();
        printf("    Line %d: Can't create dataset\n",__LINE__);
        goto error;
    } /* end if */

    /* Write data */
    if (H5Dwrite(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, points)<0) {
        H5_FAILED();
        printf("    Line %d: Error writing dataset data\n",__LINE__);
        goto error;
    } /* end if */

    /* Flush the file (to clear the cache) */
    if (H5Fflush(file, H5F_SCOPE_GLOBAL)<0) {
        H5_FAILED();
        printf("    Line %d: Error flushing file\n",__LINE__);
        goto error;
    } /* end if */

    /* Query the dataset's size on disk */
    if((dset_size=H5Dget_storage_size(dsid))==0) {
        H5_FAILED();
        printf("    Line %d: Error querying dataset size, dset_size=%lu\n",__LINE__,(unsigned long)dset_size);
        goto error;
    } /* end if */

    /* Verify that the size indicates data is uncompressed */
    /* (i.e. the deflation filter we asked for was silently ignored) */
    if((H5Tget_size(H5T_NATIVE_INT)*DSET_DIM1*DSET_DIM2)!=dset_size) {
        H5_FAILED();
        printf("    Line %d: Incorrect dataset size: %lu\n",__LINE__,(unsigned long)dset_size);
        goto error;
    } /* end if */

    /* Read data */
    if (H5Dread(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, check)<0) {
        H5_FAILED();
        printf("    Line %d: Error reading dataset data\n",__LINE__);
        goto error;
    } /* end if */

    /* Compare data */
    /* Check that the values read are the same as the values written */
    for (i=0; i<dims[0]; i++) {
	for (j=0; j<dims[1]; j++) {
	    if (points[i][j] != check[i][j]) {
		H5_FAILED();
		printf("    Line %d: Read different values than written.\n",__LINE__);
		printf("    At index %lu,%lu\n", (unsigned long)(i), (unsigned long)(j));
		printf("    At original: %d\n",points[i][j]);
		printf("    At returned: %d\n",check[i][j]);
		goto error;
	    } /* end if */
	} /* end for */
    } /* end for */

    /* Close dataset */
    if(H5Dclose(dsid)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dataset\n",__LINE__);
        goto error;
    } /* end if */

    /* Close dataspace */
    if(H5Sclose(sid)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dataspace\n",__LINE__);
        goto error;
    } /* end if */

    /* Close dataset creation property list */
    if(H5Pclose(dcpl)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dcpl\n",__LINE__);
        goto error;
    } /* end if */


    /* Try reading existing dataset with deflate filter */

    /* Compose the name of the file to open, using the srcdir, if appropriate */
    if (srcdir && ((HDstrlen(srcdir) + HDstrlen(FILE_DEFLATE_NAME) + 1) < sizeof(testfile))){
	HDstrcpy(testfile, srcdir);
	HDstrcat(testfile, "/");
    }
    HDstrcat(testfile, FILE_DEFLATE_NAME);

    /* Open existing file */
    if((fid=H5Fopen(testfile, H5F_ACC_RDONLY, H5P_DEFAULT))<0) {
        H5_FAILED();
        printf("    Line %d: Can't open existing deflated file\n",__LINE__);
        goto error;
    } /* end if */

    /* Open dataset */
    if ((dsid = H5Dopen(fid, "Dataset1"))<0) {
        H5_FAILED();
        printf("    Line %d: Can't open dataset\n",__LINE__);
        goto error;
    } /* end if */

    /* Read data (should fail, since deflate filter is missing) */
    H5E_BEGIN_TRY {
        ret=H5Dread(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, check);
    } H5E_END_TRY;
    if (ret>=0) {
        H5_FAILED();
        printf("    Line %d: Should not be able to read dataset data\n",__LINE__);
        goto error;
    } /* end if */

    /* Close dataset */
    if(H5Dclose(dsid)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dataset\n",__LINE__);
        goto error;
    } /* end if */

    /* Close existing file */
    if(H5Fclose(fid)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close file\n",__LINE__);
        goto error;
    } /* end if */

    /* Re-register the deflate filter */
        /* Verify deflate filter is not registered currently */
        if(H5Zfilter_avail(H5Z_FILTER_DEFLATE)!=FALSE) {
            H5_FAILED();
            printf("    Line %d: Deflate filter available\n",__LINE__);
            goto error;
        } /* end if */
#ifdef H5_HAVE_FILTER_DEFLATE
        /* Register deflate filter (use internal function to avoid range checks) */
        if(H5Z_register(H5Z_DEFLATE)<0) {
            H5_FAILED();
            printf("    Line %d: Can't unregister deflate filter\n",__LINE__);
            goto error;
        } /* end if */

        /* Verify deflate filter is registered currently */
        if(H5Zfilter_avail(H5Z_FILTER_DEFLATE)!=TRUE) {
            H5_FAILED();
            printf("    Line %d: Deflate filter not available\n",__LINE__);
            goto error;
        } /* end if */
#endif /* H5_HAVE_FILTER_DEFLATE */

    PASSED();
    return 0;

error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:	test_onebyte_shuffle
 *
 * Purpose:	Tests the 8-bit array with shuffling algorithm.
 *              The shuffled array  should be the same result as
 *              that before the shuffling.
 *
 * Return:	Success:	0
 *
 *		Failure:	-1
 *
 * Programmer:	Kent Yang
 *              Wednesday, Nov. 13th, 2002
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_onebyte_shuffle(hid_t file)
{
#ifdef H5_HAVE_FILTER_SHUFFLE
    hid_t		dataset, space,dc;
    const hsize_t	size[2] = {10, 20};
    const hsize_t       chunk_size[2] = {10, 20};
    unsigned char       orig_data[10][20];
    unsigned char       new_data[10][20];
    hsize_t		i, j;
#else /* H5_HAVE_FILTER_SHUFFLE */
    const char		*not_supported= "    Data shuffling is not enabled.";
#endif /* H5_HAVE_FILTER_SHUFFLE */

    TESTING("8-bit shuffling (setup)");

#ifdef H5_HAVE_FILTER_SHUFFLE
    /* Create the data space */
    if ((space = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Use shuffling algorithm with 8-bit  */
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk (dc, 2, chunk_size)<0) goto error;
    if (H5Pset_shuffle (dc)<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_ONEBYTE_SHUF_NAME, H5T_NATIVE_UCHAR,
			     space,dc))<0) goto error;

    for (i= 0;i< 10; i++)
      for (j = 0; j < 20; j++)
	orig_data[i][j] = (unsigned char)HDrandom();

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 1: Test shuffling by setting up a chunked dataset and writing
     * to it.
     *----------------------------------------------------------------------
     */
    TESTING("8-bit shuffling (write)");

#ifdef H5_HAVE_FILTER_SHUFFLE
    if (H5Dwrite(dataset, H5T_NATIVE_UCHAR, H5S_ALL, H5S_ALL, H5P_DEFAULT,
		 orig_data)<0)
	goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 2: Try to read the data we just wrote.
     *----------------------------------------------------------------------
     */
    TESTING("8-bit shuffling (read)");

#ifdef H5_HAVE_FILTER_SHUFFLE
    /* Read the dataset back */
    if (H5Dread(dataset, H5T_NATIVE_UCHAR, H5S_ALL, H5S_ALL, H5P_DEFAULT,
		new_data)<0)
	goto error;

    /* Check that the values read are the same as the values written */
    for (i=0; i<size[0]; i++) {
	for (j=0; j<size[1]; j++) {
	    if (new_data[i][j] != orig_data[i][j]) {
		H5_FAILED();
		printf("    Read different values than written.\n");
		printf("    At index %lu,%lu\n",
		       (unsigned long)i, (unsigned long)j);
		goto error;
	    }
	}
    }

    /*----------------------------------------------------------------------
     * Cleanup
     *----------------------------------------------------------------------
     */
    if (H5Pclose (dc)<0) goto error;
    if (H5Dclose(dataset)<0) goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    return 0;

error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:    test_nbit_int
 *
 * Purpose:     Tests the integer datatype for nbit filter
 *
 * Return:      Success:        0
 *
 *              Failure:        -1
 *
 * Programmer:  Xiaowen Wu
 *              Wednesday, Dec. 23th, 2004
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_nbit_int(hid_t file)
{
#ifdef H5_HAVE_FILTER_NBIT
    hid_t               dataset, datatype, mem_datatype, space, dc;
    const hsize_t       size[2] = {2, 5};
    const hsize_t       chunk_size[2] = {2,5};
    int                 orig_data[2][5];
    int                 new_data[2][5];
    unsigned int        mask;
    size_t              precision, offset;
    hsize_t             i, j;
#else /* H5_HAVE_FILTER_NBIT */
    const char          *not_supported= "    Nbit is not enabled.";
#endif /* H5_HAVE_FILTER_NBIT */

    puts("Testing nbit filter");
    TESTING("    nbit int (setup)");
#ifdef H5_HAVE_FILTER_NBIT
    /* Define dataset datatype (integer), and set precision, offset */
    datatype = H5Tcopy(H5T_NATIVE_INT);
    precision = 17; /* precision includes sign bit */
    if(H5Tset_precision(datatype,precision)<0) goto error;
    offset = 4;
    if(H5Tset_offset(datatype,offset)<0) goto error;

    /* Copy to memory datatype before setting order */
    mem_datatype = H5Tcopy(datatype);

    /* Set order of dataset datatype */
    if(H5Tset_order(datatype, H5T_ORDER_BE)<0) goto error;

    /* Create the data space */
    if ((space = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Use nbit filter  */
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk(dc, 2, chunk_size)<0) goto error;
    if (H5Pset_nbit(dc)<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_NBIT_INT_NAME, datatype,
                             space,dc))<0) goto error;

    /* Initialize data, assuming size of long_long >= size of int */
    for (i= 0;i< size[0]; i++)
      for (j = 0; j < size[1]; j++) {
        orig_data[i][j] = ((long_long)HDrandom() %
                           (long_long)HDpow(2.0, precision - 1)) << offset;

        /* even-numbered values are negtive */
        if((i*size[1]+j+1)%2 == 0)
            orig_data[i][j] = -orig_data[i][j];
      }

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 1: Test nbit by setting up a chunked dataset and writing
     * to it.
     *----------------------------------------------------------------------
     */
    TESTING("    nbit int (write)");

#ifdef H5_HAVE_FILTER_NBIT
    if (H5Dwrite(dataset, mem_datatype, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                 orig_data)<0)
        goto error;
    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 2: Try to read the data we just wrote.
     *----------------------------------------------------------------------
     */
    TESTING("    nbit int (read)");

#ifdef H5_HAVE_FILTER_NBIT
    /* Read the dataset back */
    if (H5Dread(dataset, mem_datatype, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                new_data)<0)
        goto error;

    /* Check that the values read are the same as the values written
     * Use mask for checking the significant bits, ignoring the padding bits
     */
    mask = ~(~0 << (precision + offset)) & (~0 << offset);
    for (i=0; i<size[0]; i++) {
        for (j=0; j<size[1]; j++) {
            if ((new_data[i][j] & mask) != (orig_data[i][j] & mask)) {
                H5_FAILED();
                printf("    Read different values than written.\n");
                printf("    At index %lu,%lu\n", (unsigned long)i, (unsigned long)j);
                goto error;
            }
        }
    }

    /*----------------------------------------------------------------------
     * Cleanup
     *----------------------------------------------------------------------
     */
    if (H5Tclose(datatype)<0) goto error;
    if (H5Tclose(mem_datatype)<0) goto error;
    if (H5Pclose(dc)<0) goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Dclose(dataset)<0) goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif
    return 0;
error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:    test_nbit_float
 *
 * Purpose:     Tests the float datatype of nbit filter
 *
 * Return:      Success:        0
 *
 *              Failure:        -1
 *
 * Programmer:  Xiaowen Wu
 *              Friday, Jan. 21th, 2005
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_nbit_float(hid_t file)
{
#ifdef H5_HAVE_FILTER_NBIT
    hid_t               dataset, datatype, space, dc;
    const hsize_t       size[2] = {2, 5};
    const hsize_t       chunk_size[2] = {2, 5};
    /* orig_data[] are initialized to be within the range that can be represented by
     * dataset datatype (no precision loss during datatype conversion)
     */
    float               orig_data[2][5] = {{188384.00, 19.103516, -1.0831790e9, -84.242188,
    5.2045898}, {-49140.000, 2350.2500, -3.2110596e-1, 6.4998865e-5, -0.0000000}};
    float               new_data[2][5];
    size_t              precision, offset;
    hsize_t             i, j;
#else /* H5_HAVE_FILTER_NBIT */
    const char          *not_supported= "    Nbit is not enabled.";
#endif /* H5_HAVE_FILTER_NBIT */

    TESTING("    nbit float (setup)");
#ifdef H5_HAVE_FILTER_NBIT
    /* Define user-defined single-precision floating-point type for dataset */
    datatype = H5Tcopy(H5T_IEEE_F32BE);
    if(H5Tset_fields(datatype, 26, 20, 6, 7, 13)<0) goto error;
    offset = 7;
    if(H5Tset_offset(datatype,offset)<0) goto error;
    precision = 20;
    if(H5Tset_precision(datatype,precision)<0) goto error;
    if(H5Tset_size(datatype, 4)<0) goto error;
    if(H5Tset_ebias(datatype, 31)<0) goto error;

    /* Create the data space */
    if ((space = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Use nbit filter  */
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk(dc, 2, chunk_size)<0) goto error;
    if (H5Pset_nbit(dc)<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_NBIT_FLOAT_NAME, datatype,
                             space,dc))<0) goto error;
    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 1: Test nbit by setting up a chunked dataset and writing
     * to it.
     *----------------------------------------------------------------------
     */
    TESTING("    nbit float (write)");

#ifdef H5_HAVE_FILTER_NBIT
    if (H5Dwrite(dataset, H5T_NATIVE_FLOAT, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                 orig_data)<0)
        goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 2: Try to read the data we just wrote.
     *----------------------------------------------------------------------
     */
    TESTING("    nbit float (read)");

#ifdef H5_HAVE_FILTER_NBIT
    /* Read the dataset back */
    if (H5Dread(dataset, H5T_NATIVE_FLOAT, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                new_data)<0)
        goto error;

    /* Check that the values read are the same as the values written
     * Assume size of int = size of float
     */
    for (i=0; i<size[0]; i++) {
        for (j=0; j<size[1]; j++) {
            if (!(orig_data[i][j]==orig_data[i][j])) continue;  /* skip if value is NaN */
            if (new_data[i][j] != orig_data[i][j]) {
                H5_FAILED();
                printf("    Read different values than written.\n");
                printf("    At index %lu,%lu\n", (unsigned long)i, (unsigned long)j);
                goto error;
            }
        }
    }

    /*----------------------------------------------------------------------
     * Cleanup
     *----------------------------------------------------------------------
     */
    if (H5Tclose(datatype)<0) goto error;
    if (H5Pclose(dc)<0) goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Dclose(dataset)<0) goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    return 0;

error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:    test_nbit_double
 *
 * Purpose:     Tests the double datatype of nbit filter
 *
 * Return:      Success:        0
 *
 *              Failure:        -1
 *
 * Programmer:  Xiaowen Wu
 *              Wednesday, Jan. 26th, 2005
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_nbit_double(hid_t file)
{
/* assume unsigned int and float has the same number of bytes */
#ifdef H5_HAVE_FILTER_NBIT
    hid_t               dataset, datatype, space, dc;
    const hsize_t       size[2] = {2, 5};
    const hsize_t       chunk_size[2] = {2, 5};
    /* orig_data[] are initialized to be within the range that can be represented by
     * dataset datatype (no precision loss during datatype conversion)
     */
    double              orig_data[2][5] = {{1.6081706885101836e+60, -255.32099170994480,
    1.2677579992621376e-61, 64568.289448797700, -1.0619721778839084e-75}, {2.1499497833454840e+56,
    6.6562295504670740e-3, -1.5747263393432150, 1.0711093225222612, -9.8971679387636870e-1}};
    double              new_data[2][5];
    size_t              precision, offset;
    hsize_t             i, j;
#else /* H5_HAVE_FILTER_NBIT */
    const char          *not_supported= "    Nbit is not enabled.";
#endif /* H5_HAVE_FILTER_NBIT */

    TESTING("    nbit double (setup)");
#ifdef H5_HAVE_FILTER_NBIT
    /* Define user-defined doule-precision floating-point type for dataset */
    datatype = H5Tcopy(H5T_IEEE_F64BE);
    if(H5Tset_fields(datatype, 55, 46, 9, 5, 41)<0) goto error;
    offset = 5;
    if(H5Tset_offset(datatype,offset)<0) goto error;
    precision = 51;
    if(H5Tset_precision(datatype,precision)<0) goto error;
    if(H5Tset_size(datatype, 8)<0) goto error;
    if(H5Tset_ebias(datatype, 255)<0) goto error;

    /* Create the data space */
    if ((space = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Use nbit filter  */
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk(dc, 2, chunk_size)<0) goto error;
    if (H5Pset_nbit(dc)<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_NBIT_DOUBLE_NAME, datatype,
                             space, dc))<0) goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 1: Test nbit by setting up a chunked dataset and writing
     * to it.
     *----------------------------------------------------------------------
     */
    TESTING("    nbit double (write)");

#ifdef H5_HAVE_FILTER_NBIT
    if (H5Dwrite(dataset, H5T_NATIVE_DOUBLE, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                 orig_data)<0)
        goto error;
    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 2: Try to read the data we just wrote.
     *----------------------------------------------------------------------
     */
    TESTING("    nbit double (read)");

#ifdef H5_HAVE_FILTER_NBIT
    /* Read the dataset back */
    if (H5Dread(dataset, H5T_NATIVE_DOUBLE, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                new_data)<0)
        goto error;

    /* Check that the values read are the same as the values written
     * Assume size of long_long = size of double
     */
    for (i=0; i<size[0]; i++) {
        for (j=0; j<size[1]; j++) {
            if (!(orig_data[i][j]==orig_data[i][j])) continue;  /* skip if value is NaN */
            if (new_data[i][j] != orig_data[i][j]) {
                H5_FAILED();
                printf("    Read different values than written.\n");
                printf("    At index %lu,%lu\n", (unsigned long)i, (unsigned long)j);
                goto error;
            }
        }
    }

    /*----------------------------------------------------------------------
     * Cleanup
     *----------------------------------------------------------------------
     */
    if (H5Tclose(datatype)<0) goto error;
    if (H5Pclose(dc)<0) goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Dclose(dataset)<0) goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    return 0;

error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:    test_nbit_array
 *
 * Purpose:     Tests the simple version array datatype for nbit filter
 *
 * Return:      Success:        0
 *
 *              Failure:        -1
 *
 * Programmer:  Xiaowen Wu
 *              Tuesday, Jan. 18th, 2005
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_nbit_array(hid_t file)
{
#ifdef H5_HAVE_FILTER_NBIT
    hid_t               dataset, base_datatype, array_datatype, space, dc;
    hid_t               mem_base_datatype, mem_array_datatype;
    const hsize_t       size[2] = {2, 5};
    const hsize_t       adims[2] = {3, 2};
    const hsize_t       chunk_size[2] = {2,5};
    unsigned int        orig_data[2][5][3][2];
    unsigned int        new_data[2][5][3][2];
    size_t              precision, offset;
    hsize_t             i, j, m, n;
#else /* H5_HAVE_FILTER_NBIT */
    const char          *not_supported= "    Nbit is not enabled.";
#endif /* H5_HAVE_FILTER_NBIT */

    TESTING("    nbit array (setup)");
#ifdef H5_HAVE_FILTER_NBIT
    /* Define dataset array datatype's base datatype and set precision, offset */
    base_datatype = H5Tcopy(H5T_NATIVE_UINT);
    precision = 22;
    if(H5Tset_precision(base_datatype,precision)<0) goto error;
    offset = 7;
    if(H5Tset_offset(base_datatype,offset)<0) goto error;

    /* Copy to memory array datatype's base datatype before setting order */
    mem_base_datatype = H5Tcopy(base_datatype);

    /* Set order of dataset array datatype's base datatype */
    if(H5Tset_order(base_datatype, H5T_ORDER_BE)<0) goto error;

    /* Create dataset array datatype */
    array_datatype = H5Tarray_create(base_datatype, 2, adims, NULL);

    /* Create memory array datatype */
    mem_array_datatype = H5Tarray_create(mem_base_datatype, 2, adims, NULL);

    /* Create the data space */
    if ((space = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Use nbit filter  */
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk(dc, 2, chunk_size)<0) goto error;
    if (H5Pset_nbit(dc)<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_NBIT_ARRAY_NAME, array_datatype,
                             space,dc))<0) goto error;

    /* Initialize data, assuming size of long_long >= size of unsigned int */
    for (i= 0;i< size[0]; i++)
      for (j = 0; j < size[1]; j++)
        for (m = 0; m < adims[0]; m++)
          for (n = 0; n < adims[1]; n++)
            orig_data[i][j][m][n] = ((long_long)HDrandom() %
                                     (long_long)HDpow(2.0, precision)) << offset;
    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 1: Test nbit by setting up a chunked dataset and writing
     * to it.
     *----------------------------------------------------------------------
     */
    TESTING("    nbit array (write)");

#ifdef H5_HAVE_FILTER_NBIT
    if (H5Dwrite(dataset, mem_array_datatype, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                 orig_data)<0)
        goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 2: Try to read the data we just wrote.
     *----------------------------------------------------------------------
     */
    TESTING("    nbit array (read)");

#ifdef H5_HAVE_FILTER_NBIT
    /* Read the dataset back */
    if (H5Dread(dataset, mem_array_datatype, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                new_data)<0)
        goto error;

    /* Check that the values read are the same as the values written
     */
    for (i=0; i<size[0]; i++)
      for (j=0; j<size[1]; j++)
        for (m = 0; m < adims[0]; m++)
          for (n = 0; n < adims[1]; n++) {
            if (new_data[i][j][m][n]!= orig_data[i][j][m][n]) {
                H5_FAILED();
                printf("    Read different values than written.\n");
                printf("    At index %lu,%lu,%lu,%lu\n",
                (unsigned long)i, (unsigned long)j, (unsigned long)m, (unsigned long)n);
                goto error;
            }
          }

    /*----------------------------------------------------------------------
     * Cleanup
     *----------------------------------------------------------------------
     */
    if (H5Tclose(array_datatype)<0) goto error;
    if (H5Tclose(base_datatype)<0) goto error;
    if (H5Tclose(mem_array_datatype)<0) goto error;
    if (H5Tclose(mem_base_datatype)<0) goto error;
    if (H5Pclose(dc)<0) goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Dclose(dataset)<0) goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif
    return 0;

error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:    test_nbit_compound
 *
 * Purpose:     Tests a simple version of compound datatype of nbit filter
 *
 * Return:      Success:        0
 *
 *              Failure:        -1
 *
 * Programmer:  Xiaowen Wu
 *              Tuesday, Jan. 18th, 2005
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_nbit_compound(hid_t file)
{
#ifdef H5_HAVE_FILTER_NBIT
    typedef struct {     /* Struct with atomic fields */
        int i;
        char c;
        short s;
        float f;
    } atomic;
    hid_t               i_tid, c_tid, s_tid, f_tid;
    hid_t               cmpd_tid; /* atomic compound datatype */
    hid_t               mem_cmpd_tid; /* memory atomic compound datatype */
    size_t              precision[3] = {15, 7, 10};
    size_t              offset[3] = {9, 0, 3};
    hid_t               dataset, space, dc;
    const hsize_t       size[2] = {2, 5};
    const hsize_t       chunk_size[2] = {2, 5};
    const float         float_val[2][5] = {{188384.00, 19.103516, -1.0831790e9, -84.242188,
    5.2045898}, {-49140.000, 2350.2500, -3.2110596e-1, 6.4998865e-5, -0.0000000}};
    atomic              orig_data[2][5];
    atomic              new_data[2][5];
    unsigned int        i_mask, s_mask, c_mask;
    hsize_t             i, j;

#else /* H5_HAVE_FILTER_NBIT */
    const char          *not_supported= "    Nbit is not enabled.";
#endif /* H5_HAVE_FILTER_NBIT */

    TESTING("    nbit compound (setup)");
#ifdef H5_HAVE_FILTER_NBIT
    /* Define datatypes of members of compound datatype */
    i_tid=H5Tcopy(H5T_NATIVE_INT);
    c_tid=H5Tcopy(H5T_NATIVE_CHAR);
    s_tid=H5Tcopy(H5T_NATIVE_SHORT);
    f_tid=H5Tcopy(H5T_IEEE_F32BE);

    /* Set precision and offset etc. */
    if(H5Tset_precision(i_tid,precision[0])<0) goto error;
    if(H5Tset_offset(i_tid,offset[0])<0) goto error;

    if(H5Tset_precision(c_tid,precision[1])<0) goto error;
    if(H5Tset_offset(c_tid,offset[1])<0) goto error;

    if(H5Tset_precision(s_tid,precision[2])<0) goto error;
    if(H5Tset_offset(s_tid,offset[2])<0) goto error;

    if(H5Tset_fields(f_tid, 26, 20, 6, 7, 13)<0) goto error;
    if(H5Tset_offset(f_tid, 7)<0) goto error;
    if(H5Tset_precision(f_tid, 20)<0) goto error;
    if(H5Tset_size(f_tid, 4)<0) goto error;
    if(H5Tset_ebias(f_tid, 31)<0) goto error;

    /* Create a memory compound datatype before setting the order */
    mem_cmpd_tid = H5Tcreate(H5T_COMPOUND, sizeof(atomic));
    if(H5Tinsert(mem_cmpd_tid, "i", HOFFSET(atomic, i), i_tid)<0) goto error;
    if(H5Tinsert(mem_cmpd_tid, "c", HOFFSET(atomic, c), c_tid)<0) goto error;
    if(H5Tinsert(mem_cmpd_tid, "s", HOFFSET(atomic, s), s_tid)<0) goto error;
    if(H5Tinsert(mem_cmpd_tid, "f", HOFFSET(atomic, f), H5T_NATIVE_FLOAT)<0) goto error;

    /* Set order of dataset compound member datatype */
    if(H5Tset_order(i_tid, H5T_ORDER_BE)<0) goto error;
    if(H5Tset_order(c_tid, H5T_ORDER_BE)<0) goto error;
    if(H5Tset_order(s_tid, H5T_ORDER_BE)<0) goto error;

    /* Create a dataset compound datatype and insert some atomic types */
    cmpd_tid = H5Tcreate(H5T_COMPOUND, sizeof(atomic));
    if(H5Tinsert(cmpd_tid, "i", HOFFSET(atomic, i), i_tid)<0) goto error;
    if(H5Tinsert(cmpd_tid, "c", HOFFSET(atomic, c), c_tid)<0) goto error;
    if(H5Tinsert(cmpd_tid, "s", HOFFSET(atomic, s), s_tid)<0) goto error;
    if(H5Tinsert(cmpd_tid, "f", HOFFSET(atomic, f), f_tid)<0) goto error;

    /* Create the data space */
    if ((space = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Use nbit filter  */
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk(dc, 2, chunk_size)<0) goto error;
    if (H5Pset_nbit(dc)<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_NBIT_COMPOUND_NAME, cmpd_tid,
                             space,dc))<0) goto error;

    /* Initialize data, assuming size of long_long >= size of member datatypes */
    for (i= 0;i< size[0]; i++)
      for (j = 0; j < size[1]; j++) {
        orig_data[i][j].i = ((long_long)HDrandom() %
                             (long_long)HDpow(2.0, precision[0]-1)) << offset[0];
        orig_data[i][j].c = ((long_long)HDrandom() %
                             (long_long)HDpow(2.0, precision[1]-1)) << offset[1];
        orig_data[i][j].s = ((long_long)HDrandom() %
                             (long_long)HDpow(2.0, precision[2]-1)) << offset[2];
        orig_data[i][j].f = float_val[i][j];

        /* some even-numbered integer values are negtive */
        if((i*size[1]+j+1)%2 == 0) {
            orig_data[i][j].i = -orig_data[i][j].i;
            orig_data[i][j].s = -orig_data[i][j].s;
        }
      }

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 1: Test nbit by setting up a chunked dataset and writing
     * to it.
     *----------------------------------------------------------------------
     */
    TESTING("    nbit compound (write)");

#ifdef H5_HAVE_FILTER_NBIT
    if (H5Dwrite(dataset, mem_cmpd_tid, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                 orig_data)<0)
        goto error;
    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 2: Try to read the data we just wrote.
     *----------------------------------------------------------------------
     */
    TESTING("    nbit compound (read)");

#ifdef H5_HAVE_FILTER_NBIT
    /* Read the dataset back */
    if (H5Dread(dataset, mem_cmpd_tid, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                new_data)<0)
        goto error;

    /* Check that the values read are the same as the values written
     * Use mask for checking the significant bits, ignoring the padding bits
     */
    i_mask = ~(~0 << (precision[0] + offset[0])) & (~0 << offset[0]);
    c_mask = ~(~0 << (precision[1] + offset[1])) & (~0 << offset[1]);
    s_mask = ~(~0 << (precision[2] + offset[2])) & (~0 << offset[2]);
    for (i=0; i<size[0]; i++) {
        for (j=0; j<size[1]; j++) {
            if ((new_data[i][j].i & i_mask) != (orig_data[i][j].i & i_mask) ||
                (new_data[i][j].c & c_mask) != (orig_data[i][j].c & c_mask) ||
                (new_data[i][j].s & s_mask) != (orig_data[i][j].s & s_mask) ||
                (orig_data[i][j].f==orig_data[i][j].f && new_data[i][j].f != orig_data[i][j].f))
            {
                H5_FAILED();
                printf("    Read different values than written.\n");
                printf("    At index %lu,%lu\n", (unsigned long)i, (unsigned long)j);
                goto error;
            }
        }
    }

    /*----------------------------------------------------------------------
     * Cleanup
     *----------------------------------------------------------------------
     */
    if (H5Tclose(i_tid)<0) goto error;
    if (H5Tclose(c_tid)<0) goto error;
    if (H5Tclose(s_tid)<0) goto error;
    if (H5Tclose(f_tid)<0) goto error;
    if (H5Tclose(cmpd_tid)<0) goto error;
    if (H5Tclose(mem_cmpd_tid)<0) goto error;
    if (H5Pclose(dc)<0) goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Dclose(dataset)<0) goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif
    return 0;

error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:    test_nbit_compound_2
 *
 * Purpose:     Tests a complex version of compound datatype of nbit filter
 *
 * Return:      Success:        0
 *
 *              Failure:        -1
 *
 * Programmer:  Xiaowen Wu
 *              Tuesday, Jan. 18th, 2005
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_nbit_compound_2(hid_t file)
{
#ifdef H5_HAVE_FILTER_NBIT
    typedef struct {     /* Struct with atomic fields */
        int i;
        char c;
        short s;
        float f;
    } atomic;

    typedef struct {     /* Struct with complex fields */
        atomic a;
        unsigned int v;
        char   b[2][2];
        atomic d[2][2];
    } complex;

    hid_t               i_tid, c_tid, s_tid, f_tid, v_tid;
    hid_t               cmpd_tid1; /* atomic compound datatype */
    hid_t               cmpd_tid2; /* complex compound datatype */
    hid_t               mem_cmpd_tid1; /* memory atomic compound datatype */
    hid_t               mem_cmpd_tid2; /* memory complex compound datatype */
    hid_t               base_tid;      /* simple array datatype's base datatype */
    hid_t               array_tid;     /* simple array datatype */
    hid_t               array_cmplx_tid;     /* complex array datatype */
    hid_t               mem_array_cmplx_tid; /* memory complex array datatype */
    const hsize_t       array_dims[2] = {2, 2};
    size_t              precision[5] = {31, 8, 10, 23, 8};
    size_t              offset[5] = {1, 0, 3, 5, 0};
    hid_t               dataset, space, dc;
    const hsize_t       size[2] = {2, 5};
    const hsize_t       chunk_size[2] = {2, 5};
    const float         float_val[2][5] = {{188384.00, 19.103516, -1.0831790e9, -84.242188,
    5.2045898}, {-49140.000, 2350.2500, -3.2110596e-1, 6.4998865e-5, -0.0000000}};
    complex             orig_data[2][5];
    complex             new_data[2][5];
    unsigned int        i_mask, s_mask, c_mask, b_mask;
    hsize_t             i, j, m, n, b_failed, d_failed;

#else /* H5_HAVE_FILTER_NBIT */
    const char          *not_supported= "    Nbit is not enabled.";
#endif /* H5_HAVE_FILTER_NBIT */

    TESTING("    nbit compound complex (setup)");
#ifdef H5_HAVE_FILTER_NBIT
    /* Define datatypes of members of compound datatype */
    i_tid=H5Tcopy(H5T_NATIVE_INT);
    c_tid=H5Tcopy(H5T_NATIVE_CHAR);
    s_tid=H5Tcopy(H5T_NATIVE_SHORT);
    v_tid=H5Tcopy(H5T_NATIVE_UINT);
    f_tid=H5Tcopy(H5T_IEEE_F32BE);

    /* Set precision and offset etc. of atomic compound datatype members */
    if(H5Tset_precision(i_tid,precision[0])<0) goto error;
    if(H5Tset_offset(i_tid,offset[0])<0) goto error;

    if(H5Tset_precision(c_tid,precision[1])<0) goto error;
    if(H5Tset_offset(c_tid,offset[1])<0) goto error;

    if(H5Tset_precision(s_tid,precision[2])<0) goto error;
    if(H5Tset_offset(s_tid,offset[2])<0) goto error;

    if(H5Tset_fields(f_tid, 26, 20, 6, 7, 13)<0) goto error;
    if(H5Tset_offset(f_tid, 7)<0) goto error;
    if(H5Tset_precision(f_tid, 20)<0) goto error;
    if(H5Tset_size(f_tid, 4)<0) goto error;
    if(H5Tset_ebias(f_tid, 31)<0) goto error;

    /* Create a memory atomic compound datatype before setting the order */
    mem_cmpd_tid1 = H5Tcreate(H5T_COMPOUND, sizeof(atomic));
    if(H5Tinsert(mem_cmpd_tid1, "i", HOFFSET(atomic, i), i_tid)<0) goto error;
    if(H5Tinsert(mem_cmpd_tid1, "c", HOFFSET(atomic, c), c_tid)<0) goto error;
    if(H5Tinsert(mem_cmpd_tid1, "s", HOFFSET(atomic, s), s_tid)<0) goto error;
    if(H5Tinsert(mem_cmpd_tid1, "f", HOFFSET(atomic, f), H5T_NATIVE_FLOAT)<0) goto error;

    /* Set order of dataset atomic compound member datatype */
    if(H5Tset_order(i_tid, H5T_ORDER_BE)<0) goto error;
    if(H5Tset_order(c_tid, H5T_ORDER_BE)<0) goto error;
    if(H5Tset_order(s_tid, H5T_ORDER_BE)<0) goto error;

    /* Create a dataset atomic compound datatype and insert some atomic types */
    cmpd_tid1 = H5Tcreate(H5T_COMPOUND, sizeof(atomic));
    if(H5Tinsert(cmpd_tid1, "i", HOFFSET(atomic, i), i_tid)<0) goto error;
    if(H5Tinsert(cmpd_tid1, "c", HOFFSET(atomic, c), c_tid)<0) goto error;
    if(H5Tinsert(cmpd_tid1, "s", HOFFSET(atomic, s), s_tid)<0) goto error;
    if(H5Tinsert(cmpd_tid1, "f", HOFFSET(atomic, f), f_tid)<0) goto error;

    /* Set precision and offset of the other data member */
    if(H5Tset_precision(v_tid,precision[3])<0) goto error;
    if(H5Tset_offset(v_tid,offset[3])<0) goto error;

    /* Create the simple array datatype */
    base_tid = H5Tcopy(H5T_NATIVE_CHAR);
    if(H5Tset_precision(base_tid,precision[4])<0) goto error;
    if(H5Tset_offset(base_tid,offset[4])<0) goto error;
    array_tid = H5Tarray_create(base_tid, 2, array_dims, NULL);

    /* Create the complex memory and dataset array datatype */
    array_cmplx_tid = H5Tarray_create(cmpd_tid1, 2, array_dims, NULL);
    mem_array_cmplx_tid = H5Tarray_create(mem_cmpd_tid1, 2, array_dims, NULL);

    /* Create a memory complex compound datatype before setting the order */
    mem_cmpd_tid2 = H5Tcreate(H5T_COMPOUND, sizeof(complex));
    if(H5Tinsert(mem_cmpd_tid2, "a", HOFFSET(complex, a), mem_cmpd_tid1)<0) goto error;
    if(H5Tinsert(mem_cmpd_tid2, "v", HOFFSET(complex, v), v_tid)<0) goto error;
    if(H5Tinsert(mem_cmpd_tid2, "b", HOFFSET(complex, b), array_tid)<0) goto error;
    if(H5Tinsert(mem_cmpd_tid2, "d", HOFFSET(complex, d), mem_array_cmplx_tid)<0) goto error;

    /* Set order of dataset other complex compound member datatype */
    if(H5Tset_order(v_tid, H5T_ORDER_BE)<0) goto error;

    /* Create a dataset complex compound datatype and insert members */
    cmpd_tid2 = H5Tcreate(H5T_COMPOUND, sizeof(complex));
    if(H5Tinsert(cmpd_tid2, "a", HOFFSET(complex, a), cmpd_tid1)<0) goto error;
    if(H5Tinsert(cmpd_tid2, "v", HOFFSET(complex, v), v_tid)<0) goto error;
    if(H5Tinsert(cmpd_tid2, "b", HOFFSET(complex, b), array_tid)<0) goto error;
    if(H5Tinsert(cmpd_tid2, "d", HOFFSET(complex, d), array_cmplx_tid)<0) goto error;

    /* Create the data space */
    if ((space = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Use nbit filter  */
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk(dc, 2, chunk_size)<0) goto error;
    if (H5Pset_nbit(dc)<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_NBIT_COMPOUND_NAME_2, cmpd_tid2,
                             space,dc))<0) goto error;

    /* Initialize data, assuming size of long_long >= size of member datatypes */
    for (i= 0;i< size[0]; i++)
      for (j = 0; j < size[1]; j++) {
        orig_data[i][j].a.i = ((long_long)HDrandom() %
                               (long_long)HDpow(2.0, precision[0]-1)) << offset[0];
        orig_data[i][j].a.c = ((long_long)HDrandom() %
                               (long_long)HDpow(2.0, precision[1]-1)) << offset[1];
        orig_data[i][j].a.s = -((long_long)HDrandom() %
                               (long_long)HDpow(2.0, precision[2]-1)) << offset[2];
        orig_data[i][j].a.f = float_val[i][j];

        orig_data[i][j].v = ((long_long)HDrandom() %
                             (long_long)HDpow(2.0, precision[3])) << offset[3];

        for(m = 0; m < array_dims[0]; m++)
          for(n = 0; n < array_dims[1]; n++)
            orig_data[i][j].b[m][n] = ((long_long)HDrandom() %
                                       (long_long)HDpow(2.0, precision[4]-1)) << offset[4];

        for(m = 0; m < array_dims[0]; m++)
          for(n = 0; n < array_dims[1]; n++) {
            orig_data[i][j].d[m][n].i = -((long_long)HDrandom() %
                                         (long_long)HDpow(2.0, precision[0]-1)) << offset[0];
            orig_data[i][j].d[m][n].c = ((long_long)HDrandom() %
                                         (long_long)HDpow(2.0, precision[1]-1)) << offset[1];
            orig_data[i][j].d[m][n].s = ((long_long)HDrandom() %
                                         (long_long)HDpow(2.0, precision[2]-1)) << offset[2];
            orig_data[i][j].d[m][n].f = float_val[i][j];
          }
      }

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 1: Test nbit by setting up a chunked dataset and writing
     * to it.
     *----------------------------------------------------------------------
     */
    TESTING("    nbit compound complex (write)");

#ifdef H5_HAVE_FILTER_NBIT
    if (H5Dwrite(dataset, mem_cmpd_tid2, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                 orig_data)<0)
        goto error;
    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 2: Try to read the data we just wrote.
     *----------------------------------------------------------------------
     */
    TESTING("    nbit compound complex (read)");

#ifdef H5_HAVE_FILTER_NBIT
    /* Read the dataset back */
    if (H5Dread(dataset, mem_cmpd_tid2, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                new_data)<0)
        goto error;

    /* Check that the values read are the same as the values written
     * Use mask for checking the significant bits, ignoring the padding bits
     */
    i_mask = ~(~0 << (precision[0] + offset[0])) & (~0 << offset[0]);
    c_mask = ~(~0 << (precision[1] + offset[1])) & (~0 << offset[1]);
    s_mask = ~(~0 << (precision[2] + offset[2])) & (~0 << offset[2]);
    b_mask = ~(~0 << (precision[4] + offset[4])) & (~0 << offset[4]);
    for (i=0; i<size[0]; i++) {
      for (j=0; j<size[1]; j++) {
        b_failed = 0;
        for(m = 0; m < array_dims[0]; m++)
          for(n = 0; n < array_dims[1]; n++)
             if((new_data[i][j].b[m][n]&b_mask)!=(orig_data[i][j].b[m][n]&b_mask)) {
                b_failed = 1;
                goto out;
             }

        d_failed = 0;
        for(m = 0; m < array_dims[0]; m++)
          for(n = 0; n < array_dims[1]; n++)
             if((new_data[i][j].d[m][n].i & i_mask)!=(orig_data[i][j].d[m][n].i & i_mask)||
                (new_data[i][j].d[m][n].c & c_mask)!=(orig_data[i][j].d[m][n].c & c_mask)||
                (new_data[i][j].d[m][n].s & s_mask)!=(orig_data[i][j].d[m][n].s & s_mask)||
                (new_data[i][j].d[m][n].f==new_data[i][j].d[m][n].f &&
                 new_data[i][j].d[m][n].f != new_data[i][j].d[m][n].f)) {
                d_failed = 1;
                goto out;
             }

        out:
        if((new_data[i][j].a.i & i_mask)!=(orig_data[i][j].a.i & i_mask)||
           (new_data[i][j].a.c & c_mask)!=(orig_data[i][j].a.c & c_mask)||
           (new_data[i][j].a.s & s_mask)!=(orig_data[i][j].a.s & s_mask)||
           (new_data[i][j].a.f==new_data[i][j].a.f &&
            new_data[i][j].a.f != new_data[i][j].a.f)||
            new_data[i][j].v != orig_data[i][j].v || b_failed || d_failed) {
           H5_FAILED();
           printf("    Read different values than written.\n");
           printf("    At index %lu,%lu\n", (unsigned long)i, (unsigned long)j);
           goto error;
        }
      }
    }

    /*----------------------------------------------------------------------
     * Cleanup
     *----------------------------------------------------------------------
     */
    if (H5Tclose(i_tid)<0) goto error;
    if (H5Tclose(c_tid)<0) goto error;
    if (H5Tclose(s_tid)<0) goto error;
    if (H5Tclose(f_tid)<0) goto error;
    if (H5Tclose(v_tid)<0) goto error;
    if (H5Tclose(cmpd_tid2)<0) goto error;
    if (H5Tclose(cmpd_tid1)<0) goto error;
    if (H5Tclose(mem_cmpd_tid2)<0) goto error;
    if (H5Tclose(mem_cmpd_tid1)<0) goto error;
    if (H5Tclose(array_tid)<0) goto error;
    if (H5Tclose(base_tid)<0) goto error;
    if (H5Tclose(array_cmplx_tid)<0) goto error;
    if (H5Tclose(mem_array_cmplx_tid)<0) goto error;
    if (H5Pclose(dc)<0) goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Dclose(dataset)<0) goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif
    return 0;

error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:    test_nbit_compound_3
 *
 * Purpose:     Tests no-op datatypes in compound datatype for nbit filter
 *
 * Return:      Success:        0
 *
 *              Failure:        -1
 *
 * Programmer:  Xiaowen Wu
 *              Thursday, Mar. 31th, 2005
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_nbit_compound_3(hid_t file)
{
#ifdef H5_HAVE_FILTER_NBIT
    typedef struct {     /* Struct with some no-op type fields */
        int i;              /* integer field, NOT a no-op type */
        char str[30];       /* fixed-length string, no-op type */
        char *vl_str;       /* varible-length string, no-op type */
        hvl_t v;            /* VL datatype field, no-op type */
        hobj_ref_t r;       /* Object reference field, no-op type */
        unsigned char o[5]; /* Opaque field, no-op type */
    } atomic;
    hid_t               i_tid, str_tid, vl_str_tid, v_tid, o_tid;
    hid_t               cmpd_tid; /* atomic compound datatype */
    hid_t               dataset, space, dc, obj_ref_dataset = -1;
    const hsize_t       size[1] = {5};
    const hsize_t       chunk_size[1] = {5};
    atomic              orig_data[5];
    atomic              new_data[5];
    hsize_t             i, k, j;

#else /* H5_HAVE_FILTER_NBIT */
    const char          *not_supported= "    Nbit is not enabled.";
#endif /* H5_HAVE_FILTER_NBIT */

    TESTING("    nbit compound with no-op type (setup)");
#ifdef H5_HAVE_FILTER_NBIT

    /* Define datatypes of members of compound datatype */
    i_tid=H5Tcopy(H5T_NATIVE_INT);
    if(H5Tset_precision(i_tid, 17)<0) goto error;

    str_tid=H5Tcopy(H5T_C_S1);
    if(H5Tset_size(str_tid,30)<0) goto error;

    vl_str_tid = H5Tcopy(H5T_C_S1);
    if(H5Tset_size(vl_str_tid,H5T_VARIABLE)<0) goto error;

    if((v_tid = H5Tvlen_create(H5T_NATIVE_UINT))<0) goto error;

    if((o_tid = H5Tcreate(H5T_OPAQUE, 5))<0) goto error;
    if(H5Tset_tag(o_tid, "testing opaque field")<0) goto error;

    /* Create a dataset compound datatype and insert some atomic types */
    cmpd_tid = H5Tcreate(H5T_COMPOUND, sizeof(atomic));
    if(H5Tinsert(cmpd_tid, "i", HOFFSET(atomic, i), i_tid)<0) goto error;
    if(H5Tinsert(cmpd_tid, "str", HOFFSET(atomic, str), str_tid)<0) goto error;
    if(H5Tinsert(cmpd_tid, "vl_str", HOFFSET(atomic, vl_str), vl_str_tid)<0) goto error;
    if(H5Tinsert(cmpd_tid, "v", HOFFSET(atomic, v), v_tid)<0) goto error;
    if(H5Tinsert(cmpd_tid, "r", HOFFSET(atomic, r), H5T_STD_REF_OBJ)<0) goto error;
    if(H5Tinsert(cmpd_tid, "o", HOFFSET(atomic, o), o_tid)<0) goto error;

    /* Create the data space */
    if ((space = H5Screate_simple(1, size, NULL))<0) goto error;

    /* Use nbit filter  */
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk(dc, 1, chunk_size)<0) goto error;
    if (H5Pset_nbit(dc)<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_NBIT_COMPOUND_NAME_3, cmpd_tid,
                             space, dc))<0) goto error;

    /* Create the dataset object reference points to */
    if ((obj_ref_dataset = H5Dcreate(file, "nbit_obj_ref", H5T_NATIVE_INT,
                                     space, H5P_DEFAULT))<0) goto error;

    /* Initialize data */
    for(i = 0; i < size[0]; i++) {
        orig_data[i].i = HDrandom() % (long)HDpow(2.0, 17-1);
        strcpy(orig_data[i].str, "fixed-length C string");
        orig_data[i].vl_str = strdup("variable-length C string");

        orig_data[i].v.p = HDmalloc((i+1)*sizeof(unsigned int));
        orig_data[i].v.len = i+1;
        for(k = 0; k < (i+1); k++) ((unsigned int *)orig_data[i].v.p)[k] = i*100 + k;

        /* Create reference to the dataset "nbit_obj_ref" */
        if(H5Rcreate(&orig_data[i].r, file, "nbit_obj_ref", H5R_OBJECT, -1)<0) goto error;

        for(j = 0; j < 5; j++) orig_data[i].o[j] = i + j;
    }

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 1: Test nbit by setting up a chunked dataset and writing
     * to it.
     *----------------------------------------------------------------------
     */
    TESTING("    nbit compound with no-op type (write)");

#ifdef H5_HAVE_FILTER_NBIT
    if (H5Dwrite(dataset, cmpd_tid, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                 orig_data)<0)
        goto error;
    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 2: Try to read the data we just wrote.
     *----------------------------------------------------------------------
     */
    TESTING("    nbit compound with no-op type (read)");

#ifdef H5_HAVE_FILTER_NBIT
    /* Read the dataset back */
    if (H5Dread(dataset, cmpd_tid, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                new_data)<0)
        goto error;

    /* Check that the values read are the same as the values written */
    for (i = 0; i < size[0]; i++) {
        if(new_data[i].i != orig_data[i].i ||
           strcmp(new_data[i].str, orig_data[i].str) !=0 ||
           strcmp(new_data[i].vl_str, orig_data[i].vl_str) !=0 ||
           new_data[i].v.len != orig_data[i].v.len ||
           new_data[i].r != orig_data[i].r)
        {
            H5_FAILED();
            printf("    Read different values than written.\n");
            printf("    At index %lu\n", (unsigned long)i);
            goto error;
        }

        for(k=0; k<i+1; k++)
            if(((unsigned int *)orig_data[i].v.p)[k] !=((unsigned int *)new_data[i].v.p)[k])
            {
                H5_FAILED();
                printf("    Read different values than written.\n");
                printf("    At index %lu\n", (unsigned long)i);
                goto error;
            }

        for(j=0; j<5; j++)
            if(orig_data[i].o[j] != new_data[i].o[j])
            {
                H5_FAILED();
                printf("    Read different values than written.\n");
                printf("    At index %lu\n", (unsigned long)i);
                goto error;
            }
    }

    /*----------------------------------------------------------------------
     * Cleanup
     *----------------------------------------------------------------------
     */
    if (H5Dvlen_reclaim(cmpd_tid, space, H5P_DEFAULT, new_data)<0) goto error;
    if (H5Dvlen_reclaim(cmpd_tid, space, H5P_DEFAULT, orig_data)<0) goto error;
    if (H5Tclose(i_tid)<0) goto error;
    if (H5Tclose(str_tid)<0) goto error;
    if (H5Tclose(vl_str_tid)<0) goto error;
    if (H5Tclose(v_tid)<0) goto error;
    if (H5Tclose(o_tid)<0) goto error;
    if (H5Tclose(cmpd_tid)<0) goto error;
    if (H5Pclose(dc)<0) goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Dclose(obj_ref_dataset)<0) goto error;
    if (H5Dclose(dataset)<0) goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif
    return 0;

error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:    test_scaleoffset_int
 *
 * Purpose:     Tests the integer datatype for scaleoffset filter
 *              with fill value not defined
 *
 * Return:      Success:        0
 *
 *              Failure:        -1
 *
 * Programmer:  Xiaowen Wu
 *              Monday, Feb. 14th, 2005
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_scaleoffset_int(hid_t file)
{
#ifdef H5_HAVE_FILTER_SCALEOFFSET
    hid_t               dataset, datatype, space, dc;
    const hsize_t       size[2] = {2, 5};
    const hsize_t       chunk_size[2] = {2,5};
    int                 orig_data[2][5];
    int                 new_data[2][5];
    hsize_t             i, j;
#else /* H5_HAVE_FILTER_SCALEOFFSET */
    const char          *not_supported= "    Scaleoffset is not enabled.";
#endif /* H5_HAVE_FILTER_SCALEOFFSET */

    puts("Testing scaleoffset filter");
    TESTING("    scaleoffset int without fill value (setup)");
#ifdef H5_HAVE_FILTER_SCALEOFFSET
    datatype = H5Tcopy(H5T_NATIVE_INT);

    /* Set order of dataset datatype */
    if(H5Tset_order(datatype, H5T_ORDER_BE)<0) goto error;

    /* Create the data space */
    if ((space = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Create the dataset property list  */
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;

    /* Fill value undefined */
    if (H5Pset_fill_value(dc, datatype, NULL)<0) goto error;

    /* Set up to use scaleoffset filter, let library calculate minbits */
    if (H5Pset_chunk(dc, 2, chunk_size)<0) goto error;
    if (H5Pset_scaleoffset(dc, H5_SO_INT,H5_SO_INT_MINBITS_DEFAULT)<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_SCALEOFFSET_INT_NAME, datatype,
                             space,dc))<0) goto error;

    /* Initialize data */
    for (i= 0;i< size[0]; i++)
      for (j = 0; j < size[1]; j++) {
        orig_data[i][j] = HDrandom() % 10000;

        /* even-numbered values are negtive */
        if((i*size[1]+j+1)%2 == 0)
            orig_data[i][j] = -orig_data[i][j];
      }

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 1: Test scaleoffset by setting up a chunked dataset and writing
     * to it.
     *----------------------------------------------------------------------
     */
    TESTING("    scaleoffset int without fill value (write)");

#ifdef H5_HAVE_FILTER_SCALEOFFSET
    if (H5Dwrite(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                 orig_data)<0) goto error;
    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 2: Try to read the data we just wrote.
     *----------------------------------------------------------------------
     */
    TESTING("    scaleoffset int without fill value (read)");

#ifdef H5_HAVE_FILTER_SCALEOFFSET
    /* Read the dataset back */
    if (H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                new_data)<0) goto error;

    /* Check that the values read are the same as the values written */
    for (i=0; i<size[0]; i++) {
        for (j=0; j<size[1]; j++) {
            if (new_data[i][j] != orig_data[i][j]) {
                H5_FAILED();
                printf("    Read different values than written.\n");
                printf("    At index %lu,%lu\n", (unsigned long)i, (unsigned long)j);
                goto error;
            }
        }
    }

    /*----------------------------------------------------------------------
     * Cleanup
     *----------------------------------------------------------------------
     */
    if (H5Tclose(datatype)<0) goto error;
    if (H5Pclose(dc)<0) goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Dclose(dataset)<0) goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif
    return 0;
error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:    test_scaleoffset_int_2
 *
 * Purpose:     Tests the integer datatype for scaleoffset filter
 *              with fill value set
 *
 * Return:      Success:        0
 *
 *              Failure:        -1
 *
 * Programmer:  Xiaowen Wu
 *              Tuesday, March 15th, 2005
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_scaleoffset_int_2(hid_t file)
{
#ifdef H5_HAVE_FILTER_SCALEOFFSET
    hid_t               dataset, datatype, space, mspace, dc;
    const hsize_t       size[2] = {2, 5};
    const hsize_t       chunk_size[2] = {2,5};
    int                 orig_data[2][5];
    int                 new_data[2][5];
    hsize_t             start[2]; /* Start of hyperslab */
    hsize_t             stride[2]; /* Stride of hyperslab */
    hsize_t             count[2];  /* Block count */
    hsize_t             block[2];  /* Block sizes */
    int                 fillval;
    hsize_t             j;
#else /* H5_HAVE_FILTER_SCALEOFFSET */
    const char          *not_supported= "    Scaleoffset is not enabled.";
#endif /* H5_HAVE_FILTER_SCALEOFFSET */

    TESTING("    scaleoffset int with fill value (setup)");
#ifdef H5_HAVE_FILTER_SCALEOFFSET
    datatype = H5Tcopy(H5T_NATIVE_INT);

    /* Set order of dataset datatype */
    if(H5Tset_order(datatype, H5T_ORDER_BE)<0) goto error;

    /* Create the data space for the dataset */
    if ((space = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Create the dataset property list  */
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;

    /* Set fill value */
    fillval = 10000;
    if (H5Pset_fill_value(dc, H5T_NATIVE_INT, &fillval)<0) goto error;

    /* Set up to use scaleoffset filter, let library calculate minbits */
    if (H5Pset_chunk(dc, 2, chunk_size)<0) goto error;
    if (H5Pset_scaleoffset(dc, H5_SO_INT,H5_SO_INT_MINBITS_DEFAULT)<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_SCALEOFFSET_INT_NAME_2, datatype,
                             space,dc))<0) goto error;

    /* Create the memory data space */
    if ((mspace = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Select hyperslab for data to write, using 1x5 blocks,
     * (1,1) stride and (1,1) count starting at the position (0,0).
     */
    start[0]  = 0; start[1]  = 0;
    stride[0] = 1; stride[1] = 1;
    count[0]  = 1; count[1]  = 1;
    block[0]  = 1; block[1]  = 5;
    if(H5Sselect_hyperslab(mspace, H5S_SELECT_SET, start,
                           stride, count, block)<0) goto error;

    /* Initialize data of hyperslab */
    for (j = 0; j < size[1]; j++) {
        orig_data[0][j] = (long_long)HDrandom() % 10000;

        /* even-numbered values are negtive */
        if((j+1)%2 == 0)
            orig_data[0][j] = -orig_data[0][j];
    }

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 1: Test scaleoffset by setting up a chunked dataset and writing
     * to it.
     *----------------------------------------------------------------------
     */
    TESTING("    scaleoffset int with fill value (write)");

#ifdef H5_HAVE_FILTER_SCALEOFFSET
    /* only data in the hyperslab will be written, other value should be fill value */
    if (H5Dwrite(dataset, H5T_NATIVE_INT, mspace, mspace, H5P_DEFAULT,
                 orig_data)<0) goto error;
    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 2: Try to read the data we just wrote.
     *----------------------------------------------------------------------
     */
    TESTING("    scaleoffset int with fill value (read)");

#ifdef H5_HAVE_FILTER_SCALEOFFSET
    /* Read the dataset back */
    if (H5Dread(dataset, H5T_NATIVE_INT, mspace, mspace, H5P_DEFAULT,
                new_data)<0) goto error;

    /* Check that the values read are the same as the values written */
    for (j=0; j<size[1]; j++) {
        if (new_data[0][j] != orig_data[0][j]) {
            H5_FAILED();
            printf("    Read different values than written.\n");
            printf("    At index %lu,%lu\n", (unsigned long)0, (unsigned long)j);
            goto error;
        }
    }

    /*----------------------------------------------------------------------
     * Cleanup
     *----------------------------------------------------------------------
     */
    if (H5Tclose(datatype)<0) goto error;
    if (H5Pclose(dc)<0) goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Dclose(dataset)<0) goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif
    return 0;
error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:    test_scaleoffset_float
 *
 * Purpose:     Tests the float datatype for scaleoffset filter, with fill
 *              value undefined, using variable-minimum-bits method
 *
 * Return:      Success:        0
 *
 *              Failure:        -1
 *
 * Programmer:  Xiaowen Wu
 *              Wednesday, Apr. 20th, 2005
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_scaleoffset_float(hid_t file)
{
#ifdef H5_HAVE_FILTER_SCALEOFFSET
    hid_t               dataset, datatype, space, dc;
    const hsize_t       size[2] = {2, 5};
    const hsize_t       chunk_size[2] = {2,5};
    float               orig_data[2][5];
    float               new_data[2][5];
    hsize_t             i, j;
#else /* H5_HAVE_FILTER_SCALEOFFSET */
    const char          *not_supported= "    Scaleoffset is not enabled.";
#endif /* H5_HAVE_FILTER_SCALEOFFSET */

    TESTING("    scaleoffset float without fill value, D-scaling (setup)");
#ifdef H5_HAVE_FILTER_SCALEOFFSET
    datatype = H5Tcopy(H5T_NATIVE_FLOAT);

    /* Set order of dataset datatype */
    if(H5Tset_order(datatype, H5T_ORDER_BE)<0) goto error;

    /* Create the data space */
    if ((space = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Create the dataset property list  */
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;

    /* Fill value undefined */
    if (H5Pset_fill_value(dc, datatype, NULL)<0) goto error;

    /* Set up to use scaleoffset filter, decimal scale factor is 3,
     * use variable-minimum-bits method
     */
    if (H5Pset_chunk(dc, 2, chunk_size)<0) goto error;
    if (H5Pset_scaleoffset(dc, H5_SO_FLOAT_DSCALE,3)<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_SCALEOFFSET_FLOAT_NAME, datatype,
                             space,dc))<0) goto error;

    /* Initialize data */
    for (i= 0;i< size[0]; i++)
      for (j = 0; j < size[1]; j++) {
        orig_data[i][j] = (HDrandom() % 100000) / 1000.0;

        /* even-numbered values are negtive */
        if((i*size[1]+j+1)%2 == 0)
            orig_data[i][j] = -orig_data[i][j];
      }

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 1: Test scaleoffset by setting up a chunked dataset and writing
     * to it.
     *----------------------------------------------------------------------
     */
    TESTING("    scaleoffset float without fill value, D-scaling (write)");

#ifdef H5_HAVE_FILTER_SCALEOFFSET
    if (H5Dwrite(dataset, H5T_NATIVE_FLOAT, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                 orig_data)<0) goto error;
    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 2: Try to read the data we just wrote.
     *----------------------------------------------------------------------
     */
    TESTING("    scaleoffset float without fill value, D-scaling (read)");

#ifdef H5_HAVE_FILTER_SCALEOFFSET
    /* Read the dataset back */
    if (H5Dread(dataset, H5T_NATIVE_FLOAT, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                new_data)<0) goto error;

    /* Check that the values read are the same as the values written */
    for (i=0; i<size[0]; i++) {
        for (j=0; j<size[1]; j++) {
            if (HDfabs(new_data[i][j]-orig_data[i][j]) > HDpow(10.0, -3)) {
                H5_FAILED();
                printf("    Read different values than written.\n");
                printf("    At index %lu,%lu\n", (unsigned long)i, (unsigned long)j);
                goto error;
            }
        }
    }

    /*----------------------------------------------------------------------
     * Cleanup
     *----------------------------------------------------------------------
     */
    if (H5Tclose(datatype)<0) goto error;
    if (H5Pclose(dc)<0) goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Dclose(dataset)<0) goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif
    return 0;
error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:    test_scaleoffset_float_2
 *
 * Purpose:     Tests the float datatype for scaleoffset filter, with fill
 *              value set, using variable-minimum-bits method
 *
 * Return:      Success:        0
 *
 *              Failure:        -1
 *
 * Programmer:  Xiaowen Wu
 *              Wednesday, Apr. 20th, 2005
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_scaleoffset_float_2(hid_t file)
{
#ifdef H5_HAVE_FILTER_SCALEOFFSET
    hid_t               dataset, datatype, space, mspace, dc;
    const hsize_t       size[2] = {2, 5};
    const hsize_t       chunk_size[2] = {2,5};
    float               orig_data[2][5];
    float               new_data[2][5];
    float               fillval;
    hsize_t             start[2];  /* Start of hyperslab */
    hsize_t             stride[2]; /* Stride of hyperslab */
    hsize_t             count[2];  /* Block count */
    hsize_t             block[2];  /* Block sizes */
    hsize_t             j;
#else /* H5_HAVE_FILTER_SCALEOFFSET */
    const char          *not_supported= "    Scaleoffset is not enabled.";
#endif /* H5_HAVE_FILTER_SCALEOFFSET */

    TESTING("    scaleoffset float with fill value, D-scaling (setup)");
#ifdef H5_HAVE_FILTER_SCALEOFFSET
    datatype = H5Tcopy(H5T_NATIVE_FLOAT);

    /* Set order of dataset datatype */
    if(H5Tset_order(datatype, H5T_ORDER_BE)<0) goto error;

    /* Create the data space for the dataset */
    if ((space = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Create the dataset property list  */
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;

    /* Set fill value */
    fillval = 10000.0;
    if (H5Pset_fill_value(dc, H5T_NATIVE_FLOAT, &fillval)<0) goto error;

    /* Set up to use scaleoffset filter, decimal scale factor is 3,
     * use variable-minimum-bits method
     */
    if (H5Pset_chunk(dc, 2, chunk_size)<0) goto error;
    if (H5Pset_scaleoffset(dc, H5_SO_FLOAT_DSCALE,3)<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_SCALEOFFSET_FLOAT_NAME_2, datatype,
                             space,dc))<0) goto error;

    /* Create the memory data space */
    if ((mspace = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Select hyperslab for data to write, using 1x5 blocks,
     * (1,1) stride and (1,1) count starting at the position (0,0).
     */
    start[0]  = 0; start[1]  = 0;
    stride[0] = 1; stride[1] = 1;
    count[0]  = 1; count[1]  = 1;
    block[0]  = 1; block[1]  = 5;
    if(H5Sselect_hyperslab(mspace, H5S_SELECT_SET, start,
                           stride, count, block)<0) goto error;

    /* Initialize data of hyperslab */
    for (j = 0; j < size[1]; j++) {
        orig_data[0][j] = (HDrandom() % 100000) / 1000.0;

        /* even-numbered values are negtive */
        if((j+1)%2 == 0)
            orig_data[0][j] = -orig_data[0][j];
    }

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 1: Test scaleoffset by setting up a chunked dataset and writing
     * to it.
     *----------------------------------------------------------------------
     */
    TESTING("    scaleoffset float with fill value, D-scaling (write)");

#ifdef H5_HAVE_FILTER_SCALEOFFSET
    /* only data in the hyperslab will be written, other value should be fill value */
    if (H5Dwrite(dataset, H5T_NATIVE_FLOAT, mspace, mspace, H5P_DEFAULT,
                 orig_data)<0) goto error;
    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 2: Try to read the data we just wrote.
     *----------------------------------------------------------------------
     */
    TESTING("    scaleoffset float with fill value, D-scaling (read)");

#ifdef H5_HAVE_FILTER_SCALEOFFSET
    /* Read the dataset back */
    if (H5Dread(dataset, H5T_NATIVE_FLOAT, mspace, mspace, H5P_DEFAULT,
                new_data)<0) goto error;

    /* Check that the values read are the same as the values written */
    for (j=0; j<size[1]; j++) {
        if (HDfabs(new_data[0][j]-orig_data[0][j]) > HDpow(10.0, -3)) {
            H5_FAILED();
            printf("    Read different values than written.\n");
            printf("    At index %lu,%lu\n", (unsigned long)0, (unsigned long)j);
            goto error;
        }
    }
    /*----------------------------------------------------------------------
     * Cleanup
     *----------------------------------------------------------------------
     */
    if (H5Tclose(datatype)<0) goto error;
    if (H5Pclose(dc)<0) goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Dclose(dataset)<0) goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif
    return 0;
error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:    test_scaleoffset_double
 *
 * Purpose:     Tests the double datatype for scaleoffset filter, with fill
 *              value undefined, using variable-minimum-bits method
 *
 * Return:      Success:        0
 *
 *              Failure:        -1
 *
 * Programmer:  Xiaowen Wu
 *              Monday, Apr. 25th, 2005
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_scaleoffset_double(hid_t file)
{
#ifdef H5_HAVE_FILTER_SCALEOFFSET
    hid_t               dataset, datatype, space, dc;
    const hsize_t       size[2] = {2, 5};
    const hsize_t       chunk_size[2] = {2,5};
    double              orig_data[2][5];
    double              new_data[2][5];
    hsize_t             i, j;
#else /* H5_HAVE_FILTER_SCALEOFFSET */
    const char          *not_supported= "    Scaleoffset is not enabled.";
#endif /* H5_HAVE_FILTER_SCALEOFFSET */

    TESTING("    scaleoffset double without fill value, D-scaling (setup)");
#ifdef H5_HAVE_FILTER_SCALEOFFSET
    datatype = H5Tcopy(H5T_NATIVE_DOUBLE);

    /* Set order of dataset datatype */
    if(H5Tset_order(datatype, H5T_ORDER_BE)<0) goto error;

    /* Create the data space */
    if ((space = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Create the dataset property list  */
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;

    /* Fill value undefined */
    if (H5Pset_fill_value(dc, datatype, NULL)<0) goto error;

    /* Set up to use scaleoffset filter, decimal scale factor is 7,
     * use variable-minimum-bits method
     */
    if (H5Pset_chunk(dc, 2, chunk_size)<0) goto error;
    if (H5Pset_scaleoffset(dc, H5_SO_FLOAT_DSCALE,7)<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_SCALEOFFSET_DOUBLE_NAME, datatype,
                             space,dc))<0) goto error;

    /* Initialize data */
    for (i= 0;i< size[0]; i++)
      for (j = 0; j < size[1]; j++) {
        orig_data[i][j] = (HDrandom() % 10000000) / 10000000.0;

        /* even-numbered values are negtive */
        if((i*size[1]+j+1)%2 == 0)
            orig_data[i][j] = -orig_data[i][j];
      }

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 1: Test scaleoffset by setting up a chunked dataset and writing
     * to it.
     *----------------------------------------------------------------------
     */
    TESTING("    scaleoffset double without fill value, D-scaling (write)");

#ifdef H5_HAVE_FILTER_SCALEOFFSET
    if (H5Dwrite(dataset, H5T_NATIVE_DOUBLE, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                 orig_data)<0) goto error;
    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 2: Try to read the data we just wrote.
     *----------------------------------------------------------------------
     */
    TESTING("    scaleoffset double without fill value, D-scaling (read)");

#ifdef H5_HAVE_FILTER_SCALEOFFSET
    /* Read the dataset back */
    if (H5Dread(dataset, H5T_NATIVE_DOUBLE, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                new_data)<0) goto error;

    /* Check that the values read are the same as the values written */
    for (i=0; i<size[0]; i++) {
        for (j=0; j<size[1]; j++) {
            if (HDfabs(new_data[i][j]-orig_data[i][j]) > HDpow(10.0, -7)) {
                H5_FAILED();
                printf("    Read different values than written.\n");
                printf("    At index %lu,%lu\n", (unsigned long)i, (unsigned long)j);
                goto error;
            }
        }
    }

    /*----------------------------------------------------------------------
     * Cleanup
     *----------------------------------------------------------------------
     */
    if (H5Tclose(datatype)<0) goto error;
    if (H5Pclose(dc)<0) goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Dclose(dataset)<0) goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif
    return 0;
error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:    test_scaleoffset_double_2
 *
 * Purpose:     Tests the double datatype for scaleoffset filter, with fill
 *              value set, using variable-minimum-bits method
 *
 * Return:      Success:        0
 *
 *              Failure:        -1
 *
 * Programmer:  Xiaowen Wu
 *              Monday, Apr. 25th, 2005
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_scaleoffset_double_2(hid_t file)
{
#ifdef H5_HAVE_FILTER_SCALEOFFSET
    hid_t               dataset, datatype, space, mspace, dc;
    const hsize_t       size[2] = {2, 5};
    const hsize_t       chunk_size[2] = {2,5};
    double              orig_data[2][5];
    double              new_data[2][5];
    double              fillval;
    hsize_t             start[2];  /* Start of hyperslab */
    hsize_t             stride[2]; /* Stride of hyperslab */
    hsize_t             count[2];  /* Block count */
    hsize_t             block[2];  /* Block sizes */
    hsize_t             j;
#else /* H5_HAVE_FILTER_SCALEOFFSET */
    const char          *not_supported= "    Scaleoffset is not enabled.";
#endif /* H5_HAVE_FILTER_SCALEOFFSET */

    TESTING("    scaleoffset double with fill value, D-scaling (setup)");
#ifdef H5_HAVE_FILTER_SCALEOFFSET
    datatype = H5Tcopy(H5T_NATIVE_DOUBLE);

    /* Set order of dataset datatype */
    if(H5Tset_order(datatype, H5T_ORDER_BE)<0) goto error;

    /* Create the data space for the dataset */
    if ((space = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Create the dataset property list  */
    if((dc = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;

    /* Set fill value */
    fillval = 10000.0;
    if (H5Pset_fill_value(dc, H5T_NATIVE_DOUBLE, &fillval)<0) goto error;

    /* Set up to use scaleoffset filter, decimal scale factor is 7,
     * use variable-minimum-bits method
     */
    if (H5Pset_chunk(dc, 2, chunk_size)<0) goto error;
    if (H5Pset_scaleoffset(dc, H5_SO_FLOAT_DSCALE,7)<0) goto error;

    /* Create the dataset */
    if ((dataset = H5Dcreate(file, DSET_SCALEOFFSET_DOUBLE_NAME_2, datatype,
                             space,dc))<0) goto error;

    /* Create the memory data space */
    if ((mspace = H5Screate_simple(2, size, NULL))<0) goto error;

    /* Select hyperslab for data to write, using 1x5 blocks,
     * (1,1) stride and (1,1) count starting at the position (0,0).
     */
    start[0]  = 0; start[1]  = 0;
    stride[0] = 1; stride[1] = 1;
    count[0]  = 1; count[1]  = 1;
    block[0]  = 1; block[1]  = 5;
    if(H5Sselect_hyperslab(mspace, H5S_SELECT_SET, start,
                           stride, count, block)<0) goto error;

    /* Initialize data of hyperslab */
    for (j = 0; j < size[1]; j++) {
        orig_data[0][j] = (HDrandom() % 10000000) / 10000000.0;

        /* even-numbered values are negtive */
        if((j+1)%2 == 0)
            orig_data[0][j] = -orig_data[0][j];
    }

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 1: Test scaleoffset by setting up a chunked dataset and writing
     * to it.
     *----------------------------------------------------------------------
     */
    TESTING("    scaleoffset double with fill value, D-scaling (write)");

#ifdef H5_HAVE_FILTER_SCALEOFFSET
    /* only data in the hyperslab will be written, other value should be fill value */
    if (H5Dwrite(dataset, H5T_NATIVE_DOUBLE, mspace, mspace, H5P_DEFAULT,
                 orig_data)<0) goto error;
    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif

    /*----------------------------------------------------------------------
     * STEP 2: Try to read the data we just wrote.
     *----------------------------------------------------------------------
     */
    TESTING("    scaleoffset double with fill value, D-scaling (read)");

#ifdef H5_HAVE_FILTER_SCALEOFFSET
    /* Read the dataset back */
    if (H5Dread(dataset, H5T_NATIVE_DOUBLE, mspace, mspace, H5P_DEFAULT,
                new_data)<0) goto error;

    /* Check that the values read are the same as the values written */
    for (j=0; j<size[1]; j++) {
        if (HDfabs(new_data[0][j]-orig_data[0][j]) > HDpow(10.0, -7)) {
            H5_FAILED();
            printf("    Read different values than written.\n");
            printf("    At index %lu,%lu\n", (unsigned long)0, (unsigned long)j);
            goto error;
        }
    }

    /*----------------------------------------------------------------------
     * Cleanup
     *----------------------------------------------------------------------
     */
    if (H5Tclose(datatype)<0) goto error;
    if (H5Pclose(dc)<0) goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Dclose(dataset)<0) goto error;

    PASSED();
#else
    SKIPPED();
    puts(not_supported);
#endif
    return 0;
error:
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:	test_multiopen
 *
 * Purpose:	Tests that a bug no longer exists.  If a dataset is opened
 *		twice and one of the handles is used to extend the dataset,
 *		then the other handle should return the new size when
 *		queried.
 *
 * Return:	Success:	0
 *
 *		Failure:	-1
 *
 * Programmer:	Robb Matzke
 *              Tuesday, June  9, 1998
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_multiopen (hid_t file)
{
    hid_t		dcpl=-1, space=-1, dset1=-1, dset2=-1;
    hsize_t		cur_size[1] = {10};
    static hsize_t	max_size[1] = {H5S_UNLIMITED};
    hsize_t		tmp_size[1];

    TESTING("multi-open with extending");

    /* Create the dataset and open it twice */
    if((dcpl=H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if (H5Pset_chunk (dcpl, 1, cur_size)<0) goto error;
    if ((space=H5Screate_simple (1, cur_size, max_size))<0) goto error;
    if ((dset1=H5Dcreate (file, "multiopen", H5T_NATIVE_INT, space,
			  dcpl))<0) goto error;
    if ((dset2=H5Dopen (dset1, "."))<0) goto error;
    if (H5Sclose (space)<0) goto error;

    /* Extend with the first handle */
    cur_size[0] = 20;
    if (H5Dextend (dset1, cur_size)<0) goto error;

    /* Get the size from the second handle */
    if ((space = H5Dget_space (dset2))<0) goto error;
    if (H5Sget_simple_extent_dims (space, tmp_size, NULL)<0) goto error;
    if (cur_size[0]!=tmp_size[0]) {
	H5_FAILED();
	printf ("    Got %d instead of %d!\n",
		(int)tmp_size[0], (int)cur_size[0]);
	goto error;
    }

    if (H5Dclose (dset1)<0) goto error;
    if (H5Dclose (dset2)<0) goto error;
    if (H5Sclose (space)<0) goto error;
    if (H5Pclose (dcpl)<0) goto error;
    PASSED();
    return 0;

 error:
    H5E_BEGIN_TRY {
	H5Dclose (dset1);
	H5Dclose (dset2);
	H5Sclose (space);
	H5Pclose (dcpl);
    } H5E_END_TRY;
    return -1;
}


/*-------------------------------------------------------------------------
 * Function:	test_types
 *
 * Purpose:	Make some datasets with various types so we can test h5ls.
 *
 * Return:	Success:	0
 *
 *		Failure:	-1
 *
 * Programmer:	Robb Matzke
 *              Monday, June  7, 1999
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_types(hid_t file)
{
    hid_t		grp=-1, type=-1, space=-1, dset=-1;
    size_t		i;
    hsize_t		nelmts;
    unsigned char	buf[32];

    TESTING("various datatypes");
    if ((grp=H5Gcreate(file, "typetests", 0))<0) goto error;

    /* bitfield_1 */
    nelmts = sizeof(buf);
    if ((type=H5Tcopy(H5T_STD_B8LE))<0 ||
	(space=H5Screate_simple(1, &nelmts, NULL))<0 ||
	(dset=H5Dcreate(grp, "bitfield_1", type, space, H5P_DEFAULT))<0)
	goto error;
    for (i=0; i<sizeof buf; i++) buf[i] = (unsigned char)0xff ^ (unsigned char)i;
    if (H5Dwrite(dset, type, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf)<0)
	goto error;

    if (H5Sclose(space)<0) goto error;
    if (H5Tclose(type)<0) goto error;
    if (H5Dclose(dset)<0) goto error;

    /* bitfield_2 */
    nelmts = sizeof(buf)/2;
    if ((type=H5Tcopy(H5T_STD_B16LE))<0 ||
	(space=H5Screate_simple(1, &nelmts, NULL))<0 ||
	(dset=H5Dcreate(grp, "bitfield_2", type, space, H5P_DEFAULT))<0)
	goto error;
    for (i=0; i<sizeof buf; i++) buf[i] = (unsigned char)0xff ^ (unsigned char)i;
    if (H5Dwrite(dset, type, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf)<0)
	goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Tclose(type)<0) goto error;
    if (H5Dclose(dset)<0) goto error;

    /* opaque_1 */
    nelmts = sizeof(buf);
    if ((type=H5Tcreate(H5T_OPAQUE, 1))<0 ||
	H5Tset_tag(type, "testing 1-byte opaque type")<0 ||
	(space=H5Screate_simple(1, &nelmts, NULL))<0 ||
	(dset=H5Dcreate(grp, "opaque_1", type, space, H5P_DEFAULT))<0)
	goto error;
    for (i=0; i<sizeof buf; i++) buf[i] = (unsigned char)0xff ^ (unsigned char)i;
    if (H5Dwrite(dset, type, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf)<0)
	goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Tclose(type)<0) goto error;
    if (H5Dclose(dset)<0) goto error;

    /* opaque_2 */
    nelmts = sizeof(buf)/4;
    if ((type=H5Tcreate(H5T_OPAQUE, 4))<0 ||
	H5Tset_tag(type, "testing 4-byte opaque type")<0 ||
	(space=H5Screate_simple(1, &nelmts, NULL))<0 ||
	(dset=H5Dcreate(grp, "opaque_2", type, space, H5P_DEFAULT))<0)
	goto error;
    for (i=0; i<sizeof buf; i++) buf[i] = (unsigned char)0xff ^ (unsigned char)i;
    if (H5Dwrite(dset, type, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf)<0)
	goto error;
    if (H5Sclose(space)<0) goto error;
    if (H5Tclose(type)<0) goto error;
    if (H5Dclose(dset)<0) goto error;

    /* Cleanup */
    if (H5Gclose(grp)<0) goto error;
    PASSED();
    return 0;

 error:
    H5E_BEGIN_TRY {
	H5Gclose(grp);
	H5Tclose(type);
	H5Sclose(space);
	H5Dclose(dset);
    } H5E_END_TRY;
    return -1;
}

/* This message derives from H5Z */
const H5Z_class_t H5Z_CAN_APPLY[1] = {{
	H5Z_CLASS_T_VERS,
    H5Z_FILTER_BOGUS,		/* Filter id number		*/
	1, 1,
    "bogus",			/* Filter name for debugging	*/
    can_apply_bogus,            /* The "can apply" callback     */
    NULL,                       /* The "set local" callback     */
    filter_bogus,		/* The actual filter function	*/
}};


/*-------------------------------------------------------------------------
 * Function:	test_can_apply
 *
 * Purpose:	Tests library behavior when filter indicates it can't
 *              apply to certain combinations of creation parameters
 *
 * Return:	Success:	0
 *		Failure:	-1
 *
 * Programmer:	Quincey Koziol
 *              Friday, April  5, 2003
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_can_apply(hid_t file)
{
    hid_t       dsid;           /* Dataset ID */
    hid_t       sid;            /* Dataspace ID */
    hid_t       dcpl;           /* Dataspace creation property list ID */
    const hsize_t dims[2] = {DSET_DIM1, DSET_DIM2};         /* Dataspace dimensions */
    const hsize_t chunk_dims[2] = {2, 25};      /* Chunk dimensions */
    hsize_t     dset_size;      /* Dataset size */
    hsize_t     i,j;            /* Local index variables */

    TESTING("dataset filter 'can apply' callback");

    /* Create dcpl with special filter */
    if((dcpl = H5Pcreate(H5P_DATASET_CREATE))<0) {
        H5_FAILED();
        printf("    Line %d: Can't create dcpl\n",__LINE__);
        goto error;
    } /* end if */
    if(H5Pset_chunk(dcpl, 2, chunk_dims)<0) {
        H5_FAILED();
        printf("    Line %d: Can't set chunk sizes\n",__LINE__);
        goto error;
    } /* end if */
    if(H5Zregister (H5Z_CAN_APPLY)<0) {
        H5_FAILED();
        printf("    Line %d: Can't register 'can apply' filter\n",__LINE__);
        goto error;
    }
    if(H5Pset_filter (dcpl, H5Z_FILTER_BOGUS, 0, 0, NULL)<0) {
        H5_FAILED();
        printf("    Line %d: Can't set bogus filter\n",__LINE__);
        goto error;
    }

    /* Create the data space */
    if ((sid = H5Screate_simple(2, dims, NULL))<0) {
        H5_FAILED();
        printf("    Line %d: Can't open dataspace\n",__LINE__);
        goto error;
    } /* end if */

    /* Create new dataset */
    /* (Should fail because the 'can apply' filter should indicate inappropriate combination) */
    H5E_BEGIN_TRY {
        dsid = H5Dcreate(file, DSET_CAN_APPLY_NAME, H5T_NATIVE_DOUBLE, sid, dcpl);
    } H5E_END_TRY;
    if (dsid >=0) {
        H5_FAILED();
        printf("    Line %d: Shouldn't have created dataset!\n",__LINE__);
        H5Dclose(dsid);
        goto error;
    } /* end if */

    /* Create new dataset */
    if ((dsid = H5Dcreate(file, DSET_CAN_APPLY_NAME, H5T_NATIVE_INT, sid, dcpl))<0) {
        H5_FAILED();
        printf("    Line %d: Can't create dataset\n",__LINE__);
        goto error;
    } /* end if */

    /* Write data */
    if (H5Dwrite(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, points)<0) {
        H5_FAILED();
        printf("    Line %d: Error writing dataset data\n",__LINE__);
        goto error;
    } /* end if */

    /* Flush the file (to clear the cache) */
    if (H5Fflush(file, H5F_SCOPE_GLOBAL)<0) {
        H5_FAILED();
        printf("    Line %d: Error flushing file\n",__LINE__);
        goto error;
    } /* end if */

    /* Query the dataset's size on disk */
    if((dset_size=H5Dget_storage_size(dsid))==0) {
        H5_FAILED();
        printf("    Line %d: Error querying dataset size\n",__LINE__);
        goto error;
    } /* end if */

    /* Verify that the size indicates data is uncompressed */
    if((H5Tget_size(H5T_NATIVE_INT)*dims[0]*dims[1])!=dset_size) {
        H5_FAILED();
        printf("    Line %d: Incorrect dataset size: %lu\n",__LINE__,(unsigned long)dset_size);
        goto error;
    } /* end if */

    /* Read data */
    if (H5Dread(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, check)<0) {
        H5_FAILED();
        printf("    Line %d: Error reading dataset data\n",__LINE__);
        goto error;
    } /* end if */

    /* Compare data */
    /* Check that the values read are the same as the values written */
    for (i=0; i<dims[0]; i++) {
	for (j=0; j<dims[1]; j++) {
	    if (points[i][j] != check[i][j]) {
		H5_FAILED();
		printf("    Line %d: Read different values than written.\n",__LINE__);
		printf("    At index %lu,%lu\n", (unsigned long)(i), (unsigned long)(j));
		printf("    At original: %d\n",points[i][j]);
		printf("    At returned: %d\n",check[i][j]);
		goto error;
	    } /* end if */
	} /* end for */
    } /* end for */

    /* Close dataset */
    if(H5Dclose(dsid)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dataset\n",__LINE__);
        goto error;
    } /* end if */

    /* Close dataspace */
    if(H5Sclose(sid)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dataspace\n",__LINE__);
        goto error;
    } /* end if */

    /* Close dataset creation property list */
    if(H5Pclose(dcpl)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dcpl\n",__LINE__);
        goto error;
    } /* end if */


    PASSED();
    return 0;

error:
    return -1;
} /* end test_can_apply() */


/*-------------------------------------------------------------------------
 * Function:	test_can_apply_szip
 *
 * Purpose:	Tests library behavior when szip filter indicates it can't
 *              apply to certain combinations of creation parameters
 *
 * Return:	Success:	0
 *		Failure:	-1
 *
 * Programmer:	Quincey Koziol
 *              Monday, April  7, 2003
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_can_apply_szip(hid_t
#ifndef H5_HAVE_FILTER_SZIP
UNUSED
#endif /* H5_HAVE_FILTER_SZIP */
file)
{
#ifdef H5_HAVE_FILTER_SZIP
    hid_t       dsid;           /* Dataset ID */
    hid_t       sid;            /* Dataspace ID */
    hid_t       dcpl;           /* Dataspace creation property list ID */
    unsigned szip_options_mask=H5_SZIP_NN_OPTION_MASK;
    unsigned szip_pixels_per_block;
    const hsize_t dims[2] = {500, 4096};        /* Dataspace dimensions */
    const hsize_t dims2[2] = {4, 2};            /* Dataspace dimensions */
    const hsize_t chunk_dims[2] = {250, 2048};  /* Chunk dimensions */
    const hsize_t chunk_dims2[2] = {2, 1};      /* Chunk dimensions */
    herr_t      ret;            /* Status value */
#endif /* H5_HAVE_FILTER_SZIP */

    TESTING("dataset szip filter 'can apply' callback");

#ifdef H5_HAVE_FILTER_SZIP

    if (h5_szip_can_encode() == 1) {
    /* Create the data space */
    if ((sid = H5Screate_simple(2, dims, NULL))<0) {
        H5_FAILED();
        printf("    Line %d: Can't open dataspace\n",__LINE__);
        goto error;
    } /* end if */

    /* Create dcpl with special filter */
    if((dcpl = H5Pcreate(H5P_DATASET_CREATE))<0) {
        H5_FAILED();
        printf("    Line %d: Can't create dcpl\n",__LINE__);
        goto error;
    } /* end if */
    if(H5Pset_chunk(dcpl, 2, chunk_dims)<0) {
        H5_FAILED();
        printf("    Line %d: Can't set chunk sizes\n",__LINE__);
        goto error;
    } /* end if */

    /* Set (invalid at property set time) szip parameters */
    szip_pixels_per_block=3;
    H5E_BEGIN_TRY {
        ret=H5Pset_szip (dcpl, szip_options_mask, szip_pixels_per_block);
    } H5E_END_TRY;
    if(ret>=0) {
        H5_FAILED();
        printf("    Line %d: Shouldn't be able to set szip filter\n",__LINE__);
        goto error;
    }

    /* Set (invalid at property set time) szip parameters */
    szip_pixels_per_block=512;
    H5E_BEGIN_TRY {
        ret=H5Pset_szip (dcpl, szip_options_mask, szip_pixels_per_block);
    } H5E_END_TRY;
    if(ret>=0) {
        H5_FAILED();
        printf("    Line %d: Shouldn't be able to set szip filter\n",__LINE__);
        goto error;
    }

    /* Set (invalid at dataset creation time) szip parameters */
    szip_pixels_per_block=2;
    if(H5Pset_szip (dcpl, szip_options_mask, szip_pixels_per_block)<0) {
        H5_FAILED();
        printf("    Line %d: Can't set szip filter\n",__LINE__);
        goto error;
    }

    /* Create new dataset */
    /* (Should succeed; according to the new algorithm, scanline should be reset
        to 2*128 satisfying 'maximum blocks per scanline' condition) */
    H5E_BEGIN_TRY {
        dsid = H5Dcreate(file, DSET_CAN_APPLY_SZIP_NAME, H5T_NATIVE_INT, sid, dcpl);
    } H5E_END_TRY;
    if (dsid <=0) {
        H5_FAILED();
        printf("    Line %d: Should have created dataset!\n",__LINE__);
        goto error;
    } /* end if */

    /* Close dataset */
    if(H5Dclose(dsid)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dataset\n",__LINE__);
        goto error;
    } /* end if */

    /* Close dataspace */
    if(H5Sclose(sid)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dataspace\n",__LINE__);
        goto error;
    } /* end if */

    /* Close dataset creation property list */
    if(H5Pclose(dcpl)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dcpl\n",__LINE__);
        goto error;
    } /* end if */

    /* Create another data space */
    if ((sid = H5Screate_simple(2, dims2, NULL))<0) {
        H5_FAILED();
        printf("    Line %d: Can't open dataspace\n",__LINE__);
        goto error;
    } /* end if */

    /* Create dcpl with special filter */
    if((dcpl = H5Pcreate(H5P_DATASET_CREATE))<0) {
        H5_FAILED();
        printf("    Line %d: Can't create dcpl\n",__LINE__);
        goto error;
    } /* end if */
    if(H5Pset_chunk(dcpl, 2, chunk_dims2)<0) {
        H5_FAILED();
        printf("    Line %d: Can't set chunk sizes\n",__LINE__);
        goto error;
    } /* end if */

    /* Set (invalid at dataset creation time) szip parameters */
    szip_pixels_per_block=32;
    if(H5Pset_szip (dcpl, szip_options_mask, szip_pixels_per_block)<0) {
        H5_FAILED();
        printf("    Line %d: Can't set szip filter\n",__LINE__);
        goto error;
    }

    /* Create new dataset */
    /* (Should fail because the 'can apply' filter should indicate inappropriate combination) */
    H5E_BEGIN_TRY {
        dsid = H5Dcreate(file, DSET_CAN_APPLY_SZIP_NAME, H5T_NATIVE_INT, sid, dcpl);
    } H5E_END_TRY;
    if (dsid >=0) {
        H5_FAILED();
        printf("    Line %d: Shouldn't have created dataset!\n",__LINE__);
        H5Dclose(dsid);
        goto error;
    } /* end if */

    /* Close dataspace */
    if(H5Sclose(sid)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dataspace\n",__LINE__);
        goto error;
    } /* end if */

    /* Close dataset creation property list */
    if(H5Pclose(dcpl)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dcpl\n",__LINE__);
        goto error;
    } /* end if */


    PASSED();
} else {
    SKIPPED();
    puts("    Szip encoding is not enabled.");
}
#else /* H5_HAVE_FILTER_SZIP */
    SKIPPED();
    puts("    Szip filter is not enabled.");
#endif /* H5_HAVE_FILTER_SZIP */
    return 0;

#ifdef H5_HAVE_FILTER_SZIP
error:
    return -1;
#endif /* H5_HAVE_FILTER_SZIP */
} /* end test_can_apply_szip() */


/* This message derives from H5Z */
const H5Z_class_t H5Z_SET_LOCAL[1] = {{
	H5Z_CLASS_T_VERS,
    H5Z_FILTER_BOGUS2,		/* Filter id number		*/
	1, 1,
    "bogus2",			/* Filter name for debugging	*/
    NULL,                       /* The "can apply" callback     */
    set_local_bogus2,           /* The "set local" callback     */
    filter_bogus2,		/* The actual filter function	*/
}};


/*-------------------------------------------------------------------------
 * Function:	test_set_local
 *
 * Purpose:	Tests library behavior for "set local" filter callback
 *
 * Return:	Success:	0
 *		Failure:	-1
 *
 * Programmer:	Quincey Koziol
 *              Monday, April  7, 2003
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_set_local(hid_t fapl)
{
    char        filename[32];
    hid_t       file;           /* File ID */
    hid_t       dsid;           /* Dataset ID */
    hid_t       sid;            /* Dataspace ID */
    hid_t       dcpl;           /* Dataspace creation property list ID */
    const hsize_t dims[2] = {DSET_DIM1, DSET_DIM2};         /* Dataspace dimensions */
    const hsize_t chunk_dims[2] = {2, 25};      /* Chunk dimensions */
    hsize_t     dset_size;      /* Dataset size */
    unsigned    cd_values[2]={BOGUS2_PARAM_1, BOGUS2_PARAM_2};   /* Parameters for Bogus2 filter */
    hsize_t     i,j;          /* Local index variables */
    double      n;          /* Local index variables */

    TESTING("dataset filter 'set local' callback");

    h5_fixname(FILENAME[5], fapl, filename, sizeof filename);

    /* Initialize the integer & floating-point dataset */
    n=0.0;
    for (i = 0; i < DSET_DIM1; i++)
	for (j = 0; j < DSET_DIM2; j++) {
	    points[i][j] = (int)n++;
	    points_dbl[i][j] = (double)1.5*n++;
	}

    /* Open file */
    if ((file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl))<0) {
        H5_FAILED();
        printf("    Line %d: Can't open file\n",__LINE__);
	goto error;
    }

    /* Create dcpl with special filter */
    if((dcpl = H5Pcreate(H5P_DATASET_CREATE))<0) {
        H5_FAILED();
        printf("    Line %d: Can't create dcpl\n",__LINE__);
        goto error;
    } /* end if */
    if(H5Pset_chunk(dcpl, 2, chunk_dims)<0) {
        H5_FAILED();
        printf("    Line %d: Can't set chunk sizes\n",__LINE__);
        goto error;
    } /* end if */
    if(H5Zregister (H5Z_SET_LOCAL)<0) {
        H5_FAILED();
        printf("    Line %d: Can't register 'set local' filter\n",__LINE__);
        goto error;
    }
    if(H5Pset_filter (dcpl, H5Z_FILTER_BOGUS2, 0, BOGUS2_PERM_NPARMS, cd_values)<0) {
        H5_FAILED();
        printf("    Line %d: Can't set bogus2 filter\n",__LINE__);
        goto error;
    }

    /* Create the data space */
    if ((sid = H5Screate_simple(2, dims, NULL))<0) {
        H5_FAILED();
        printf("    Line %d: Can't open dataspace\n",__LINE__);
        goto error;
    } /* end if */

    /* Create new dataset */
    if ((dsid = H5Dcreate(file, DSET_SET_LOCAL_NAME, H5T_NATIVE_INT, sid, dcpl))<0) {
        H5_FAILED();
        printf("    Line %d: Can't create dataset\n",__LINE__);
        goto error;
    } /* end if */

    /* Write data */
    if (H5Dwrite(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, points)<0) {
        H5_FAILED();
        printf("    Line %d: Error writing dataset data\n",__LINE__);
        goto error;
    } /* end if */

    /* Close dataset */
    if(H5Dclose(dsid)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dataset\n",__LINE__);
        goto error;
    } /* end if */

    /* Create new dataset */
    /* (Shouldn't get modified by output filter) */
    if ((dsid = H5Dcreate(file, DSET_SET_LOCAL_NAME_2, H5T_NATIVE_DOUBLE, sid, dcpl))<0) {
        H5_FAILED();
        printf("    Line %d: Can't create dataset\n",__LINE__);
        goto error;
    } /* end if */

    /* Write data */
    if (H5Dwrite(dsid, H5T_NATIVE_DOUBLE, H5S_ALL, H5S_ALL, H5P_DEFAULT, points_dbl)<0) {
        H5_FAILED();
        printf("    Line %d: Error writing dataset data\n",__LINE__);
        goto error;
    } /* end if */

    /* Close dataset */
    if(H5Dclose(dsid)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dataset\n",__LINE__);
        goto error;
    } /* end if */

    /* Close dataspace */
    if(H5Sclose(sid)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dataspace\n",__LINE__);
        goto error;
    } /* end if */

    /* Close dataset creation property list */
    if(H5Pclose(dcpl)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dcpl\n",__LINE__);
        goto error;
    } /* end if */

    /* Close file (flushes & empties cache) */
    if (H5Fclose(file)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close file\n",__LINE__);
        goto error;
    } /* end if */

    /* Open file */
    if ((file=H5Fopen(filename, H5F_ACC_RDWR, fapl))<0) {
        H5_FAILED();
        printf("    Line %d: Can't open file\n",__LINE__);
        goto error;
    }

    /* Re-open dataset */
    if ((dsid = H5Dopen(file, DSET_SET_LOCAL_NAME))<0) {
        H5_FAILED();
        printf("    Line %d: Can't open dataset\n",__LINE__);
        goto error;
    } /* end if */

    /* Query the dataset's size on disk */
    if((dset_size=H5Dget_storage_size(dsid))==0) {
        H5_FAILED();
        printf("    Line %d: Error querying dataset size\n",__LINE__);
        goto error;
    } /* end if */

    /* Verify that the size indicates data is uncompressed */
    if((H5Tget_size(H5T_NATIVE_INT)*dims[0]*dims[1])!=dset_size) {
        H5_FAILED();
        printf("    Line %d: Incorrect dataset size: %lu\n",__LINE__,(unsigned long)dset_size);
        goto error;
    } /* end if */

    /* Read data */
    if (H5Dread(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, check)<0) {
        H5_FAILED();
        printf("    Line %d: Error reading dataset data\n",__LINE__);
        goto error;
    } /* end if */

    /* Compare data */
    /* Check that the values read are the modified version of what was written */
    for (i=0; i<dims[0]; i++) {
	for (j=0; j<dims[1]; j++) {
	    if ((points[i][j]+(int)sizeof(int)) != check[i][j]) {
		H5_FAILED();
		printf("    Line %d: Read different values than written.\n",__LINE__);
		printf("    At index %lu,%lu\n", (unsigned long)(i), (unsigned long)(j));
		printf("    At original: %d\n",points[i][j]);
		printf("    At returned: %d\n",check[i][j]);
		goto error;
	    } /* end if */
	} /* end for */
    } /* end for */

    /* Close dataset */
    if(H5Dclose(dsid)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dataset\n",__LINE__);
        goto error;
    } /* end if */

    /* Re-open second dataset */
    if ((dsid = H5Dopen(file, DSET_SET_LOCAL_NAME_2))<0) {
        H5_FAILED();
        printf("    Line %d: Can't open dataset\n",__LINE__);
        goto error;
    } /* end if */

    /* Query the dataset's size on disk */
    if((dset_size=H5Dget_storage_size(dsid))==0) {
        H5_FAILED();
        printf("    Line %d: Error querying dataset size\n",__LINE__);
        goto error;
    } /* end if */

    /* Verify that the size indicates data is uncompressed */
    if((H5Tget_size(H5T_NATIVE_DOUBLE)*dims[0]*dims[1])!=dset_size) {
        H5_FAILED();
        printf("    Line %d: Incorrect dataset size: %lu\n",__LINE__,(unsigned long)dset_size);
        goto error;
    } /* end if */

    /* Read data */
    if (H5Dread(dsid, H5T_NATIVE_DOUBLE, H5S_ALL, H5S_ALL, H5P_DEFAULT, check_dbl)<0) {
        H5_FAILED();
        printf("    Line %d: Error reading dataset data\n",__LINE__);
        goto error;
    } /* end if */

    /* Compare data */
    /* Check that the values read are the modified version of what was written */
    for (i=0; i<dims[0]; i++) {
	for (j=0; j<dims[1]; j++) {
	    if (points_dbl[i][j] != check_dbl[i][j]) {
		H5_FAILED();
		printf("    Line %d: Read different values than written.\n",__LINE__);
		printf("    At index %lu,%lu\n", (unsigned long)(i), (unsigned long)(j));
		printf("    At original: %f\n",points_dbl[i][j]);
		printf("    At returned: %f\n",check_dbl[i][j]);
		goto error;
	    } /* end if */
	} /* end for */
    } /* end for */

    /* Close dataset */
    if(H5Dclose(dsid)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close dataset\n",__LINE__);
        goto error;
    } /* end if */

    /* Close file */
    if (H5Fclose(file)<0) {
        H5_FAILED();
        printf("    Line %d: Can't close file\n",__LINE__);
        goto error;
    } /* end if */


    PASSED();
    return 0;

error:
    return -1;
} /* end test_set_local() */


/*-------------------------------------------------------------------------
 * Function:	test_compare_dcpl
 *
 * Purpose:	Verifies that if the same DCPL was used to create two
 *              datasets, the DCPLs retrieved from each dataset should
 *              compare equal.
 *
 * Return:	Success:	0
 *		Failure:	-1
 *
 * Programmer:	Quincey Koziol
 *              Wednesday, January  7, 2004
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_compare_dcpl(hid_t file)
{
    hid_t       dsid=(-1);      /* Dataset ID */
    hid_t       sid=(-1);       /* Dataspace ID */
    hid_t       dcpl=(-1);      /* Dataspace creation property list ID */
    hid_t       dcpl1=(-1),dcpl2=(-1);          /* Dataspace creation property list IDs from datasets */
    const hsize_t dims[2] = {500, 4096};        /* Dataspace dimensions */
    const hsize_t chunk_dims[2] = {250, 2048};  /* Chunk dimensions */

    TESTING("comparing dataset creation property lists");

    /* Create the data space */
    if ((sid = H5Screate_simple(2, dims, NULL))<0) TEST_ERROR

    /* Create dcpl with special filter */
    if((dcpl = H5Pcreate(H5P_DATASET_CREATE))<0) TEST_ERROR
    if(H5Pset_chunk(dcpl, 2, chunk_dims)<0) TEST_ERROR

    /* Set gzip parameter (if available) */
#ifdef H5_HAVE_FILTER_DEFLATE
    if(H5Pset_deflate (dcpl, 9)<0) TEST_ERROR
#endif /* H5_HAVE_FILTER_DEFLATE */

    /* Create first dataset */
    if ((dsid = H5Dcreate(file, DSET_COMPARE_DCPL_NAME, H5T_NATIVE_INT, sid, dcpl)) <0) TEST_ERROR

    /* Get copy of dataset's dataset creation property list */
    if ((dcpl1=H5Dget_create_plist(dsid))<0) TEST_ERROR

    /* Close dataset */
    if(H5Dclose (dsid)<0) TEST_ERROR

    /* Create second dataset */
    if ((dsid = H5Dcreate(file, DSET_COMPARE_DCPL_NAME_2, H5T_NATIVE_INT, sid, dcpl)) <0) TEST_ERROR

    /* Get copy of dataset's dataset creation property list */
    if ((dcpl2=H5Dget_create_plist(dsid))<0) TEST_ERROR

    /* Close dataset */
    if(H5Dclose (dsid)<0) TEST_ERROR

    /* Close dataspace */
    if(H5Sclose(sid)<0) TEST_ERROR

    /* Compare dataset creation property lists */
    if(H5Pequal(dcpl1,dcpl2)<=0) TEST_ERROR

    /* Close dataset creation property lists */
    if(H5Pclose(dcpl)<0) TEST_ERROR
    if(H5Pclose(dcpl1)<0) TEST_ERROR
    if(H5Pclose(dcpl2)<0) TEST_ERROR


    PASSED();

    return 0;

error:
    H5E_BEGIN_TRY {
        H5Dclose(dsid);
        H5Sclose(sid);
        H5Pclose(dcpl);
        H5Pclose(dcpl1);
        H5Pclose(dcpl2);
    } H5E_END_TRY;
    return -1;
} /* end test_compare_dcpl() */


/*-------------------------------------------------------------------------
 * Function: test_filter_delete
 *
 * Purpose: Tests deletion of filters from a dataset creation property list
 *
 * Return: Success: 0
 *  Failure: -1
 *
 * Programmer: Pedro Vicente
 *              Monday, January 26, 2004
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_filter_delete(hid_t file)
{
    H5Z_filter_t filtn;                 /* filter identification number */
    hid_t        dsid=-1;                  /* dataset ID */
    hid_t        sid=-1;                   /* dataspace ID */
    hid_t        dcpl=-1;                  /* dataset creation property list ID */
    hid_t        dcpl1=-1;                 /* dataset creation property list ID */
    hsize_t      dims[2]={20,20};       /* dataspace dimensions */
    hsize_t      chunk_dims[2]={10,10}; /* chunk dimensions */
    int          nfilters;              /* number of filters in DCPL */
    herr_t       ret;                   /* generic return value */
    int          i;

    TESTING("filter deletion");

#if defined H5_HAVE_FILTER_DEFLATE && defined H5_HAVE_FILTER_SHUFFLE && defined H5_HAVE_FILTER_FLETCHER32
    /* create the data space */
    if ((sid = H5Screate_simple(2, dims, NULL))<0) goto error;

    /* create dcpl  */
    if((dcpl = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if(H5Pset_chunk(dcpl, 2, chunk_dims)<0) goto error;

    if (H5Pset_fletcher32 (dcpl)<0) goto error;
    if (H5Pset_deflate (dcpl, 6)<0) goto error;
    if (H5Pset_shuffle (dcpl)<0) goto error;

    /* create a dataset */
    if ((dsid = H5Dcreate(file,"dsetdel", H5T_NATIVE_INT, sid, dcpl)) <0) goto error;

    /* get copy of dataset's dataset creation property list */
    if ((dcpl1=H5Dget_create_plist(dsid))<0) goto error;

   /*----------------------------------------------------------------------
    * delete the deflate filter
    *----------------------------------------------------------------------
    */
    /* delete the deflate filter */
    if (H5Premove_filter(dcpl1,H5Z_FILTER_DEFLATE)<0) goto error;

    /* get information about filters */
    if ((nfilters = H5Pget_nfilters(dcpl1))<0) goto error;

    /* check if filter was deleted */
    for (i=0; i<nfilters; i++) {
#ifdef H5_WANT_H5_V1_6_COMPAT
        filtn = H5Pget_filter(dcpl1,(unsigned)i,0,0,0,0,0);
#else
        filtn = H5Pget_filter(dcpl1,(unsigned)i,0,0,0,0,0,NULL);
#endif
        if (H5Z_FILTER_DEFLATE==filtn)
            goto error;
    }

    /* try to delete the deflate filter again */
    H5E_BEGIN_TRY {
        ret=H5Premove_filter(dcpl1,H5Z_FILTER_DEFLATE);
    } H5E_END_TRY;
    if (ret >=0) {
        H5_FAILED();
        printf("    Line %d: Shouldn't have deleted filter!\n",__LINE__);
        goto error;
    } /* end if */

   /*----------------------------------------------------------------------
    * delete all filters
    *----------------------------------------------------------------------
    */
    /* delete all filters */
    if (H5Premove_filter(dcpl1,H5Z_FILTER_ALL)<0) goto error;

    /* get information about filters */
    if ((nfilters = H5Pget_nfilters(dcpl1))<0) goto error;

    /* check if filters were deleted */
    if (nfilters)goto error;

   /*----------------------------------------------------------------------
    * close
    *----------------------------------------------------------------------
    */

    /* clean up objects used for this test */
    if (H5Pclose (dcpl)<0) goto error;
    if (H5Pclose (dcpl1)<0) goto error;
    if (H5Dclose (dsid)<0) goto error;
    if (H5Sclose (sid)<0) goto error;

    PASSED();
#else
    SKIPPED();
#endif
    return 0;

error:
    H5E_BEGIN_TRY {
        H5Pclose(dcpl);
        H5Pclose(dcpl1);
        H5Dclose(dsid);
        H5Sclose(sid);
    } H5E_END_TRY;
    return -1;
} /* end test_filter_delete() */



/*-------------------------------------------------------------------------
 * Function: auxread_fdata
 *
 * Purpose: reads a dataset "NAME" from FID
 *
 * Return: Success: 0
 *  Failure: -1
 *
 * Programmer: Pedro Vicente
 *              Monday, March 8, 2004
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
auxread_fdata(hid_t fid, const char *name)
{
 hid_t     dset_id=-1;           /* dataset ID */
 hid_t     dcpl_id=-1;           /* dataset creation property list ID */
 hid_t     space_id=-1;          /* space ID */
 hid_t     ftype_id=-1;          /* file data type ID */
 hid_t     mtype_id=-1;          /* memory data type ID */
 size_t    msize;             /* memory size of memory type */
 void      *buf=NULL;         /* data buffer */
 hsize_t   nelmts;            /* number of elements in dataset */
 int       rank;              /* rank of dataset */
 hsize_t   dims[H5S_MAX_RANK];/* dimensions of dataset */
 int       i;

 if ((dset_id=H5Dopen(fid,name))<0)
  goto error;
 if ((space_id=H5Dget_space(dset_id))<0)
  goto error;
 if ((ftype_id=H5Dget_type (dset_id))<0)
  goto error;
 if ((dcpl_id=H5Dget_create_plist(dset_id))<0)
  goto error;
 if ( (rank=H5Sget_simple_extent_ndims(space_id))<0)
  goto error;
 HDmemset(dims, 0, sizeof dims);
 if ( H5Sget_simple_extent_dims(space_id,dims,NULL)<0)
  goto error;
 nelmts=1;
 for (i=0; i<rank; i++)
  nelmts*=dims[i];
 if ((mtype_id=H5Tget_native_type(ftype_id,H5T_DIR_DEFAULT))<0)
  goto error;
 if ((msize=H5Tget_size(mtype_id))==0)
  goto error;

 if (nelmts)
 {
  buf=(void *) HDmalloc((unsigned)(nelmts*msize));
  if ( buf==NULL){
   printf( "cannot read into memory\n" );
   goto error;
  }
  if (H5Dread(dset_id,mtype_id,H5S_ALL,H5S_ALL,H5P_DEFAULT,buf)<0)
   goto error;
 }

 if (H5Pclose(dcpl_id)<0)
  goto error;
 if (H5Sclose(space_id)<0)
  goto error;
 if (H5Dclose(dset_id)<0)
  goto error;
 if (buf)
  free(buf);

 return 0;

error:
 H5E_BEGIN_TRY {
  H5Pclose(dcpl_id);
  H5Sclose(space_id);
  H5Dclose(dset_id);
  H5Tclose(ftype_id);
  H5Tclose(mtype_id);
  if (buf)
   free(buf);
 } H5E_END_TRY;
 return -1;
}


/*-------------------------------------------------------------------------
 * Function: test_filters_endianess
 *
 * Purpose: Reads/writes data with filters (big-endian/little-endian data)
 *
 * Return: Success: 0
 *  Failure: -1
 *
 * Programmer: Pedro Vicente
 *              Monday, March 8, 2004
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_filters_endianess(void)
{
    hid_t     fid=-1;                   /* file ID */
    hid_t     dsid=-1;                  /* dataset ID */
    hid_t     sid=-1;                   /* dataspace ID */
    hid_t     dcpl=-1;                  /* dataset creation property list ID */
    hsize_t   dims[1]={2};           /* dataspace dimensions */
    hsize_t   chunk_dims[1]={2};     /* chunk dimensions */
    int       buf[2];
    int       rank=1;
    int       i;
    char      *srcdir = getenv("srcdir"); /* the source directory */
    char      data_file[512]="";          /* buffer to hold name of existing file */

    for (i=0; i<2; i++){
     buf[i]=1;
    }

    TESTING("filters with big-endian/little-endian data");

#if defined H5_HAVE_FILTER_FLETCHER32
   /*-------------------------------------------------------------------------
    * step1: create a file
    *-------------------------------------------------------------------------
    */
    /* create a file using default properties */
    fid=H5Fcreate("test_filters.h5",H5F_ACC_TRUNC,H5P_DEFAULT,H5P_DEFAULT);

    /* create a data space */
    if ((sid = H5Screate_simple(rank,dims,NULL))<0) goto error;

    /* create dcpl  */
    if((dcpl = H5Pcreate(H5P_DATASET_CREATE))<0) goto error;
    if(H5Pset_chunk(dcpl,rank,chunk_dims)<0) goto error;

    if (H5Pset_fletcher32 (dcpl)<0) goto error;

    /* create a dataset */
    if ((dsid = H5Dcreate(fid,"dset",H5T_NATIVE_INT,sid,dcpl)) <0) goto error;

    if(H5Dwrite(dsid,H5T_NATIVE_INT,H5S_ALL,H5S_ALL,H5P_DEFAULT,buf)<0)
     goto error;

    /* close */
    if (H5Pclose (dcpl)<0) goto error;
    if (H5Dclose (dsid)<0) goto error;
    if (H5Sclose (sid)<0) goto error;
    if (H5Fclose (fid)<0) goto error;

   /*-------------------------------------------------------------------------
    * step 2: open a file written on a little-endian machine in step 1
    *-------------------------------------------------------------------------
    */

    /* compose the name of the file to open, using the srcdir, if appropriate */
    strcpy(data_file, "");
    if ( srcdir )
    {
     strcpy(data_file, srcdir);
     strcat(data_file, "/");
    }
	   strcat( data_file, "test_filters_le.hdf5");

    /* open */
    if ((fid=H5Fopen(data_file,H5F_ACC_RDONLY,H5P_DEFAULT))<0)
     goto error;

    /* read */
    if (auxread_fdata(fid,"dset")<0) goto error;

    /* close */
    if (H5Fclose(fid)<0) goto error;

   /*-------------------------------------------------------------------------
    * step 3: open a file written on a big-endian machine in step 1
    *-------------------------------------------------------------------------
    */

    /* compose the name of the file to open, using the srcdir, if appropriate */
    strcpy(data_file, "");
    if ( srcdir )
    {
     strcpy(data_file, srcdir);
     strcat(data_file, "/");
    }
	   strcat( data_file, "test_filters_be.hdf5");

    /* open */
    if ((fid=H5Fopen(data_file,H5F_ACC_RDONLY,H5P_DEFAULT))<0)
     goto error;

    /* read */
    if (auxread_fdata(fid,"dset")<0) goto error;

    /* close */
    if (H5Fclose(fid)<0) goto error;

    PASSED();
#else
    SKIPPED();
#endif
    return 0;

error:
    H5E_BEGIN_TRY {
        H5Pclose(dcpl);
        H5Dclose(dsid);
        H5Sclose(sid);
        H5Fclose(fid);
    } H5E_END_TRY;
    return -1;
} /* end test_filters_endianess() */


/*-------------------------------------------------------------------------
 * Function: test_zero_dims
 *
 * Purpose: Tests read/writes to zero-sized extendible datasets
 *
 * Return: Success: 0
 *  Failure: -1
 *
 * Programmer: Quincey Koziol
 *              Tuesday, July 27, 2004
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_zero_dims(hid_t file)
{
    hid_t       s=-1, d=-1, dcpl=-1;
    hsize_t     dsize=0, dmax=H5S_UNLIMITED, csize=5;

    TESTING("I/O on datasets with zero-sized dims");

    if((s = H5Screate_simple(1, &dsize, &dmax))<0) TEST_ERROR;
    if((dcpl = H5Pcreate(H5P_DATASET_CREATE))<0) TEST_ERROR;
    if(H5Pset_chunk(dcpl, 1, &csize)<0) TEST_ERROR;
    if((d = H5Dcreate(file, ZERODIM_DATASET, H5T_NATIVE_INT, s, dcpl))<0) TEST_ERROR;

    if(H5Dwrite(d, H5T_NATIVE_INT, s, s, H5P_DEFAULT, (void*)911)<0) TEST_ERROR;

    if(H5Pclose(dcpl)<0) TEST_ERROR;
    if(H5Sclose(s)<0) TEST_ERROR;
    if(H5Dclose(d)<0) TEST_ERROR;

    PASSED();
    return 0;

error:
    H5E_BEGIN_TRY {
        H5Pclose(dcpl);
        H5Dclose(d);
        H5Sclose(s);
    } H5E_END_TRY;
    return -1;
} /* end test_zero_dims() */


/*-------------------------------------------------------------------------
 * Function: test_missing_chunk
 *
 * Purpose: Tests that reads from chunked dataset with undefined fill value and
 *              not all chunks written don't overwrite data in user's buffer
 *              for missing chunks.
 *
 * Return: Success: 0
 *  Failure: -1
 *
 * Programmer: Quincey Koziol
 *              Tuesday, August 25, 2004
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static herr_t
test_missing_chunk(hid_t file)
{
    hid_t       s=-1, d=-1, dcpl=-1;
    hsize_t	hs_start[1];
    hsize_t	hs_stride[1],
                hs_count[1],
                hs_block[1];
    int         wdata[MISSING_CHUNK_DIM],
                rdata[MISSING_CHUNK_DIM];
    hsize_t     dsize=100, dmax=H5S_UNLIMITED, csize=5;
    size_t      u;

    TESTING("Read dataset with unwritten chunk & undefined fill value");

    /* Initialize data */
    for(u=0; u<MISSING_CHUNK_DIM; u++) {
        wdata[u]=u;
        rdata[u]=911;
    } /* end for */

    /* Create dataspace */
    if((s = H5Screate_simple(1, &dsize, &dmax))<0) TEST_ERROR;

    /* Create dataset creation property list */
    if((dcpl = H5Pcreate(H5P_DATASET_CREATE))<0) TEST_ERROR;

    /* Set to chunked */
    if(H5Pset_chunk(dcpl, 1, &csize)<0) TEST_ERROR;

    /* Undefine fill value */
    if(H5Pset_fill_value(dcpl, H5T_NATIVE_INT, NULL)<0) TEST_ERROR;

    /* Create dataset */
    if((d = H5Dcreate(file, MISSING_CHUNK_DATASET, H5T_NATIVE_INT, s, dcpl))<0) TEST_ERROR;

    /* Select elements in every other chunk */
    hs_start[0]=0;
    hs_stride[0]=10;
    hs_count[0]=10;
    hs_block[0]=5;
    if (H5Sselect_hyperslab(s, H5S_SELECT_SET, hs_start, hs_stride, hs_count,
			    hs_block)<0) TEST_ERROR;

    /* Write selected data */
    if(H5Dwrite(d, H5T_NATIVE_INT, s, s, H5P_DEFAULT, wdata)<0) TEST_ERROR;

    /* Read all data */
    if(H5Dread(d, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, rdata)<0) TEST_ERROR;

    /* Validata values read */
    for(u=0; u<MISSING_CHUNK_DIM; u++) {
        if((u%10)>=5) {
            if(rdata[u]!=911) {
                printf("    Line %d: Incorrect value, rdata[%u]=%d\n",__LINE__,(unsigned)u,rdata[u]);
                TEST_ERROR;
            } /* end if */
        } /* end if */
        else {
            if(rdata[u]!=wdata[u]) {
                printf("    Line %d: Incorrect value, wdata[%u]=%d, rdata[%u]=%d\n",__LINE__,(unsigned)u,wdata[u],(unsigned)u,rdata[u]);
                TEST_ERROR;
            } /* end if */
        } /* end else */
    } /* end for */

    /* Close everything */
    if(H5Pclose(dcpl)<0) TEST_ERROR;
    if(H5Sclose(s)<0) TEST_ERROR;
    if(H5Dclose(d)<0) TEST_ERROR;

    PASSED();
    return 0;

error:
    H5E_BEGIN_TRY {
        H5Pclose(dcpl);
        H5Dclose(d);
        H5Sclose(s);
    } H5E_END_TRY;
    return -1;
} /* end test_zero_dims() */


/*-------------------------------------------------------------------------
 * Function:	main
 *
 * Purpose:	Tests the dataset interface (H5D)
 *
 * Return:	Success:	exit(0)
 *
 *		Failure:	exit(1)
 *
 * Programmer:	Robb Matzke
 *		Tuesday, December  9, 1997
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
int
main(void)
{
    hid_t		file, grp, fapl;
    int mdc_nelmts;
    size_t rdcc_nelmts;
    size_t rdcc_nbytes;
    double rdcc_w0;
    int			nerrors=0;
    char		filename[1024];

    h5_reset();
    fapl = h5_fileaccess();

    /* Set the random # seed */
    HDsrandom((unsigned long)HDtime(NULL));

    h5_fixname(FILENAME[0], fapl, filename, sizeof filename);

    /* Turn off the chunk cache, so all the chunks are immediately written to disk */
    if(H5Pget_cache(fapl, &mdc_nelmts, &rdcc_nelmts, &rdcc_nbytes, &rdcc_w0)<0) goto error;
    rdcc_nbytes=0;
    if(H5Pset_cache(fapl, mdc_nelmts, rdcc_nelmts, rdcc_nbytes, rdcc_w0)<0) goto error;

    if ((file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl))<0) {
	goto error;
    }

    /* Cause the library to emit initial messages */
    if ((grp = H5Gcreate (file, "emit diagnostics", 0))<0) goto error;
    if (H5Gset_comment(grp, ".", "Causes diagnostic messages to be emitted")<0)
	goto error;
    if (H5Gclose (grp)<0) goto error;

    nerrors += test_create(file)<0 	?1:0;
    nerrors += test_simple_io(fapl)<0	?1:0;
    nerrors += test_compact_io(fapl)<0  ?1:0;
    nerrors += test_max_compact(fapl)<0  ?1:0;
    nerrors += test_conv_buffer(file)<0	?1:0;
    nerrors += test_tconv(file)<0	?1:0;
    nerrors += test_filters(file)<0	?1:0;
    nerrors += test_onebyte_shuffle(file)<0 ?1:0;
    nerrors += test_nbit_int(file)<0 ?1:0;
    nerrors += test_nbit_float(file)<0         ?1:0;
    nerrors += test_nbit_double(file)<0         ?1:0;
    nerrors += test_nbit_array(file)<0 ?1:0;
    nerrors += test_nbit_compound(file)<0 ?1:0;
    nerrors += test_nbit_compound_2(file)<0 ?1:0;
    nerrors += test_nbit_compound_3(file)<0 ?1:0;
    nerrors += test_scaleoffset_int(file)<0 ?1:0;
    nerrors += test_scaleoffset_int_2(file)<0 ?1:0;
    nerrors += test_scaleoffset_float(file)<0 ?1:0;
    nerrors += test_scaleoffset_float_2(file)<0 ?1:0;
    nerrors += test_scaleoffset_double(file)<0 ?1:0;
    nerrors += test_scaleoffset_double_2(file)<0 ?1:0;
    nerrors += test_multiopen (file)<0	?1:0;
    nerrors += test_types(file)<0       ?1:0;
    nerrors += test_userblock_offset(fapl)<0     ?1:0;
    nerrors += test_missing_filter(file)<0	?1:0;
    nerrors += test_can_apply(file)<0	?1:0;
    nerrors += test_set_local(fapl)<0	?1:0;
    nerrors += test_can_apply_szip(file)<0	?1:0;
    nerrors += test_compare_dcpl(file)<0	?1:0;
    nerrors += test_filter_delete(file)<0	?1:0;
    nerrors += test_filters_endianess()<0	?1:0;
    nerrors += test_zero_dims(file)<0	?1:0;
    nerrors += test_missing_chunk(file)<0	?1:0;

    if (H5Fclose(file)<0) goto error;

    if (nerrors) goto error;
    printf("All dataset tests passed.\n");
    h5_cleanup(FILENAME, fapl);
    return 0;

 error:
    nerrors = MAX(1, nerrors);
    printf("***** %d DATASET TEST%s FAILED! *****\n",
	   nerrors, 1 == nerrors ? "" : "S");
    return 1;
}