/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Programmer: Robb Matzke * Tuesday, December 9, 1997 * * Purpose: Tests the dataset interface (H5D) */ #include #include #include "h5test.h" #include "H5srcdir.h" #ifdef H5_HAVE_SZLIB_H # include "szlib.h" #endif /* * This file needs to access private datatypes from the H5Z package. */ #define H5Z_PACKAGE #include "H5Zpkg.h" const char *FILENAME[] = { "dataset", "compact_dataset", "dset_offset", "max_compact_dataset", "simple", "set_local", "random_chunks", "huge_chunks", "chunk_cache", "big_chunk", "chunk_expand", "copy_dcpl_newfile", NULL }; #define FILENAME_BUF_SIZE 1024 #define FILE_DEFLATE_NAME "deflate.h5" /* Dataset names for testing filters */ #define DSET_DEFAULT_NAME "default" #define DSET_CHUNKED_NAME "chunked" #define DSET_COMPACT_NAME "compact" #define DSET_SIMPLE_IO_NAME "simple_io" #define DSET_USERBLOCK_IO_NAME "userblock_io" #define DSET_COMPACT_IO_NAME "compact_io" #define DSET_COMPACT_MAX_NAME "max_compact" #define DSET_COMPACT_MAX2_NAME "max_compact_2" #define DSET_CONV_BUF_NAME "conv_buf" #define DSET_TCONV_NAME "tconv" #define DSET_DEFLATE_NAME "deflate" #define DSET_SZIP_NAME "szip" #define DSET_SHUFFLE_NAME "shuffle" #define DSET_FLETCHER32_NAME "fletcher32" #define DSET_FLETCHER32_NAME_2 "fletcher32_2" #define DSET_FLETCHER32_NAME_3 "fletcher32_3" #define DSET_SHUF_DEF_FLET_NAME "shuffle+deflate+fletcher32" #define DSET_SHUF_DEF_FLET_NAME_2 "shuffle+deflate+fletcher32_2" #define DSET_SHUF_SZIP_FLET_NAME "shuffle+szip+fletcher32" #define DSET_SHUF_SZIP_FLET_NAME_2 "shuffle+szip+fletcher32_2" #define DSET_BOGUS_NAME "bogus" #define DSET_MISSING_NAME "missing" #define DSET_CAN_APPLY_NAME "can_apply" #define DSET_CAN_APPLY_NAME2 "can_apply2" #define DSET_CAN_APPLY_SZIP_NAME "can_apply_szip" #define DSET_SET_LOCAL_NAME "set_local" #define DSET_SET_LOCAL_NAME_2 "set_local_2" #define DSET_ONEBYTE_SHUF_NAME "onebyte_shuffle" #define DSET_NBIT_INT_NAME "nbit_int" #define DSET_NBIT_FLOAT_NAME "nbit_float" #define DSET_NBIT_DOUBLE_NAME "nbit_double" #define DSET_NBIT_ARRAY_NAME "nbit_array" #define DSET_NBIT_COMPOUND_NAME "nbit_compound" #define DSET_NBIT_COMPOUND_NAME_2 "nbit_compound_2" #define DSET_NBIT_COMPOUND_NAME_3 "nbit_compound_3" #define DSET_SCALEOFFSET_INT_NAME "scaleoffset_int" #define DSET_SCALEOFFSET_INT_NAME_2 "scaleoffset_int_2" #define DSET_SCALEOFFSET_FLOAT_NAME "scaleoffset_float" #define DSET_SCALEOFFSET_FLOAT_NAME_2 "scaleoffset_float_2" #define DSET_SCALEOFFSET_DOUBLE_NAME "scaleoffset_double" #define DSET_SCALEOFFSET_DOUBLE_NAME_2 "scaleoffset_double_2" #define DSET_COMPARE_DCPL_NAME "compare_dcpl" #define DSET_COMPARE_DCPL_NAME_2 "compare_dcpl_2" #define DSET_COPY_DCPL_NAME_1 "copy_dcpl_1" #define DSET_COPY_DCPL_NAME_2 "copy_dcpl_2" #define COPY_DCPL_EXTFILE_NAME "ext_file" #define DSET_DEPREC_NAME "deprecated" #define DSET_DEPREC_NAME_CHUNKED "deprecated_chunked" #define DSET_DEPREC_NAME_COMPACT "deprecated_compact" #define DSET_DEPREC_NAME_FILTER "deprecated_filter" #define USER_BLOCK 1024 #define SIXTY_FOUR_KB 65536 /* Temporary filter IDs used for testing */ #define H5Z_FILTER_BOGUS 305 #define H5Z_FILTER_CORRUPT 306 #define H5Z_FILTER_CAN_APPLY_TEST 307 #define H5Z_FILTER_SET_LOCAL_TEST 308 #define H5Z_FILTER_DEPREC 309 #define H5Z_FILTER_EXPAND 310 #define H5Z_FILTER_CAN_APPLY_TEST2 311 /* Flags for testing filters */ #define DISABLE_FLETCHER32 0 #define ENABLE_FLETCHER32 1 #define DATA_CORRUPTED 1 #define DATA_NOT_CORRUPTED 0 /* Parameters for the "set local" test */ #define BOGUS2_PERM_NPARMS 2 /* Number of "permanent" parameters */ #define BOGUS2_PARAM_1 13 /* (No particular meaning, just for checking value) */ #define BOGUS2_PARAM_2 35 /* (No particular meaning, just for checking value) */ #define BOGUS2_ALL_NPARMS 4 /* Total number of parameter = permanent + "local" parameters */ /* Dimensionality for conversion buffer test */ #define DIM1 100 /* Dim. Size of data member # 1 */ #define DIM2 5000 /* Dim. Size of data member # 2 */ #define DIM3 10 /* Dim. Size of data member # 3 */ /* Parameters for internal filter test */ #define FILTER_CHUNK_DIM1 2 #define FILTER_CHUNK_DIM2 25 #define FILTER_HS_OFFSET1 7 #define FILTER_HS_OFFSET2 30 #define FILTER_HS_SIZE1 4 #define FILTER_HS_SIZE2 50 /* Names for noencoder test */ #ifdef H5_HAVE_FILTER_SZIP #define NOENCODER_FILENAME "noencoder.h5" #define NOENCODER_COPY_FILENAME "noencoder.h5.copy" #define NOENCODER_TEST_DATASET "noencoder_tdset.h5" #define NOENCODER_SZIP_DATASET "noencoder_szip_dset.h5" #define NOENCODER_SZIP_SHUFF_FLETCH_DATASET "noencoder_szip_shuffle_fletcher_dset.h5" #endif /* H5_HAVE_FILTER_SZIP */ /* Names for zero-dim test */ #define ZERODIM_DATASET "zerodim" /* Parameters for zero-dim test */ #define MISSING_CHUNK_DATASET "missing_chunk" #define MISSING_CHUNK_DIM 100 /* Names for random chunks test */ #define NPOINTS 50 /* Parameters for huge chunks test */ #define HUGE_DATASET "Dataset" #define HUGE_DIM ((hsize_t)16 * 1024 * 1024 * 1024) #define HUGE_CHUNK_DIM ((hsize_t)2 * 1024 * 1024 * 1024) #define TOO_HUGE_CHUNK_DIM ((hsize_t)4 * 1024 * 1024 * 1024) #define HUGE_DATASET2 "Dataset2" #define HUGE_DIM2_0 ((hsize_t)16 * 1024) #define HUGE_DIM2_1 ((hsize_t)16 * 1024) #define HUGE_DIM2_2 ((hsize_t)16 * 1024) #define HUGE_CHUNK_DIM2_0 ((hsize_t)2 * 1024) #define HUGE_CHUNK_DIM2_1 ((hsize_t)1024) #define HUGE_CHUNK_DIM2_2 ((hsize_t)1024) #define TOO_HUGE_CHUNK_DIM2_0 ((hsize_t)4 * 1024) #define TOO_HUGE_CHUNK_DIM2_1 ((hsize_t)1024) #define TOO_HUGE_CHUNK_DIM2_2 ((hsize_t)1024) /* Parameters for testing bypassing chunk cache */ #define BYPASS_DATASET1 "Dset1" #define BYPASS_DATASET2 "Dset2" #define BYPASS_DIM 1000 #define BYPASS_CHUNK_DIM 500 #define BYPASS_FILL_VALUE 7 /* Shared global arrays */ #define DSET_DIM1 100 #define DSET_DIM2 200 int points[DSET_DIM1][DSET_DIM2], check[DSET_DIM1][DSET_DIM2]; double points_dbl[DSET_DIM1][DSET_DIM2], check_dbl[DSET_DIM1][DSET_DIM2]; /* Local prototypes for filter functions */ static size_t filter_bogus(unsigned int flags, size_t cd_nelmts, const unsigned int *cd_values, size_t nbytes, size_t *buf_size, void **buf); static htri_t can_apply_bogus(hid_t dcpl_id, hid_t type_id, hid_t space_id); static herr_t set_local_bogus2(hid_t dcpl_id, hid_t type_id, hid_t space_id); static size_t filter_bogus2(unsigned int flags, size_t cd_nelmts, const unsigned int *cd_values, size_t nbytes, size_t *buf_size, void **buf); static size_t filter_bogus3(unsigned int flags, size_t cd_nelmts, const unsigned int *cd_values, size_t nbytes, size_t *buf_size, void **buf); static size_t filter_corrupt(unsigned int flags, size_t cd_nelmts, const unsigned int *cd_values, size_t nbytes, size_t *buf_size, void **buf); static size_t filter_expand(unsigned int flags, size_t cd_nelmts, const unsigned int *cd_values, size_t nbytes, size_t *buf_size, void **buf); /*------------------------------------------------------------------------- * Function: test_create * * Purpose: Attempts to create a dataset. * * Return: Success: 0 * * Failure: -1 * * Programmer: Robb Matzke * Tuesday, December 9, 1997 * * Modifications: * Added test for compact dataset creation. * Raymond Lu * August 8, 2002 * *------------------------------------------------------------------------- */ static herr_t test_create(hid_t file) { hid_t dataset, space, small_space, create_parms; hsize_t dims[2], small_dims[2]; herr_t status; hsize_t csize[2]; TESTING("create, open, close"); /* Create the data space */ dims[0] = 256; dims[1] = 512; space = H5Screate_simple(2, dims, NULL); assert(space>=0); /* Create a small data space for compact dataset */ small_dims[0] = 16; small_dims[1] = 8; small_space = H5Screate_simple(2, small_dims, NULL); assert(space>=0); /* * Create a dataset using the default dataset creation properties. We're * not sure what they are, so we won't check. */ dataset = H5Dcreate2(file, DSET_DEFAULT_NAME, H5T_NATIVE_DOUBLE, space, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT); if(dataset < 0) goto error; /* Close the dataset */ if(H5Dclose(dataset) < 0) goto error; /* Add a comment to the dataset */ status = H5Oset_comment_by_name(file, DSET_DEFAULT_NAME, "This is a dataset", H5P_DEFAULT); if(status < 0) goto error; /* * Try creating a dataset that already exists. This should fail since a * dataset can only be created once. Temporarily turn off error * reporting. */ H5E_BEGIN_TRY { dataset = H5Dcreate2(file, DSET_DEFAULT_NAME, H5T_NATIVE_DOUBLE, space, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT); } H5E_END_TRY; if(dataset >= 0) { H5_FAILED(); puts(" Library allowed overwrite of existing dataset."); goto error; } /* * Open the dataset we created above and then close it. This is how * existing datasets are accessed. */ if(H5Fflush(file, H5F_SCOPE_GLOBAL) < 0) goto error; if((dataset = H5Dopen2(file, DSET_DEFAULT_NAME, H5P_DEFAULT)) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; /* * Try opening a non-existent dataset. This should fail since new datasets * cannot be created with this function. Temporarily turn off error * reporting. */ H5E_BEGIN_TRY { dataset = H5Dopen2(file, "does_not_exist", H5P_DEFAULT); } H5E_END_TRY; if(dataset >= 0) { H5_FAILED(); puts(" Opened a non-existent dataset."); goto error; } /* * Create a new dataset that uses chunked storage instead of the default * layout. */ create_parms = H5Pcreate(H5P_DATASET_CREATE); assert(create_parms >= 0); /* Attempt to create a dataset with invalid chunk sizes */ csize[0] = dims[0]*2; csize[1] = dims[1]*2; status = H5Pset_chunk(create_parms, 2, csize); assert(status >= 0); H5E_BEGIN_TRY { dataset = H5Dcreate2(file, DSET_CHUNKED_NAME, H5T_NATIVE_DOUBLE, space, H5P_DEFAULT, create_parms, H5P_DEFAULT); } H5E_END_TRY; if(dataset >= 0) { H5_FAILED(); puts(" Opened a dataset with incorrect chunking parameters."); goto error; } csize[0] = 5; csize[1] = 100; status = H5Pset_chunk(create_parms, 2, csize); assert(status >= 0); dataset = H5Dcreate2(file, DSET_CHUNKED_NAME, H5T_NATIVE_DOUBLE, space, H5P_DEFAULT, create_parms, H5P_DEFAULT); if(dataset < 0) goto error; H5Pclose(create_parms); /* Test dataset address. Should be undefined. */ if(H5Dget_offset(dataset)!=HADDR_UNDEF) goto error; /* * Close the chunked dataset. */ if(H5Dclose(dataset) < 0) goto error; /* * Create a compact dataset, then close it. */ create_parms = H5Pcreate(H5P_DATASET_CREATE); assert(create_parms >= 0); status = H5Pset_layout(create_parms, H5D_COMPACT); assert(status >= 0); status = H5Pset_alloc_time(create_parms, H5D_ALLOC_TIME_EARLY); assert(status >= 0); dataset = H5Dcreate2(file, DSET_COMPACT_NAME, H5T_NATIVE_DOUBLE, small_space, H5P_DEFAULT, create_parms, H5P_DEFAULT); if(dataset < 0) goto error; H5Pclose(create_parms); if(H5Dclose(dataset) < 0) goto error; PASSED(); return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_simple_io * * Purpose: Tests simple I/O. That is, reading and writing a complete * multi-dimensional array without data type or data space * conversions, without compression, and stored contiguously. * * Return: Success: 0 * * Failure: -1 * * Programmer: Robb Matzke * Wednesday, December 10, 1997 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_simple_io(const char *env_h5_drvr, hid_t fapl) { char filename[FILENAME_BUF_SIZE]; hid_t file, dataset, space, xfer; int i, j, n; hsize_t dims[2]; void *tconv_buf = NULL; int f; haddr_t offset; int rdata[DSET_DIM1][DSET_DIM2]; TESTING("simple I/O"); /* Can't run this test with multi-file VFDs */ if(HDstrcmp(env_h5_drvr, "split") && HDstrcmp(env_h5_drvr, "multi") && HDstrcmp(env_h5_drvr, "family")) { h5_fixname(FILENAME[4], fapl, filename, sizeof filename); /* Initialize the dataset */ for(i = n = 0; i < DSET_DIM1; i++) for(j = 0; j < DSET_DIM2; j++) points[i][j] = n++; if((file = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0) goto error; /* Create the data space */ dims[0] = DSET_DIM1; dims[1] = DSET_DIM2; if((space = H5Screate_simple(2, dims, NULL)) < 0) goto error; /* Create a small conversion buffer to test strip mining */ tconv_buf = HDmalloc((size_t)1000); xfer = H5Pcreate(H5P_DATASET_XFER); assert(xfer>=0); if(H5Pset_buffer (xfer, (size_t)1000, tconv_buf, NULL) < 0) goto error; /* Create the dataset */ if((dataset = H5Dcreate2(file, DSET_SIMPLE_IO_NAME, H5T_NATIVE_INT, space, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) goto error; /* Test dataset address. Should be undefined. */ if(H5Dget_offset(dataset) != HADDR_UNDEF) goto error; /* Write the data to the dataset */ if(H5Dwrite(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, xfer, points) < 0) goto error; /* Test dataset address in file. Open the same file as a C file, seek * the data position as H5Dget_offset points to, read the dataset, and * compare it with the data written in.*/ if((offset=H5Dget_offset(dataset))==HADDR_UNDEF) goto error; /* Read the dataset back */ if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, xfer, check) < 0) goto error; /* Check that the values read are the same as the values written */ for(i = 0; i < DSET_DIM1; i++) { for(j = 0; j < DSET_DIM2; j++) { if(points[i][j] != check[i][j]) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %d,%d\n", i, j); goto error; } } } if(H5Pclose (xfer) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; if(H5Fclose(file) < 0) goto error; f = HDopen(filename, O_RDONLY, 0); HDlseek(f, (off_t)offset, SEEK_SET); HDread(f, rdata, sizeof(int)*DSET_DIM1*DSET_DIM2); /* Check that the values read are the same as the values written */ for(i = 0; i < DSET_DIM1; i++) { for(j = 0; j < DSET_DIM2; j++) { if(points[i][j] != rdata[i][j]) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %d,%d\n", i, j); goto error; } } } HDclose(f); free (tconv_buf); PASSED(); } /* end if */ else { SKIPPED(); puts(" Current VFD doesn't support continuous address space"); } /* end else */ return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_userblock_offset * * Purpose: Tests H5Dget_offset when user block exists. * * Return: Success: 0 * * Failure: -1 * * Programmer: Raymond Lu * Wednesday, November 27, 2002 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_userblock_offset(const char *env_h5_drvr, hid_t fapl) { char filename[FILENAME_BUF_SIZE]; hid_t file, fcpl, dataset, space; int i, j; hsize_t dims[2]; int f; haddr_t offset; int rdata[DSET_DIM1][DSET_DIM2]; TESTING("dataset offset with user block"); /* Can't run this test with multi-file VFDs */ if(HDstrcmp(env_h5_drvr, "split") && HDstrcmp(env_h5_drvr, "multi") && HDstrcmp(env_h5_drvr, "family")) { h5_fixname(FILENAME[2], fapl, filename, sizeof filename); if((fcpl=H5Pcreate(H5P_FILE_CREATE)) < 0) goto error; if(H5Pset_userblock(fcpl, (hsize_t)USER_BLOCK) < 0) goto error; if((file=H5Fcreate(filename, H5F_ACC_TRUNC, fcpl, fapl)) < 0) goto error; /* Create the data space */ dims[0] = DSET_DIM1; dims[1] = DSET_DIM2; if((space = H5Screate_simple(2, dims, NULL)) < 0) goto error; /* Create the dataset */ if((dataset = H5Dcreate2(file, DSET_USERBLOCK_IO_NAME, H5T_NATIVE_INT, space, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) goto error; /* Write the data to the dataset */ if(H5Dwrite(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, points) < 0) goto error; /* Test dataset address in file. Open the same file as a C file, seek * the data position as H5Dget_offset points to, read the dataset, and * compare it with the data written in.*/ if((offset = H5Dget_offset(dataset)) == HADDR_UNDEF) goto error; if(H5Dclose(dataset) < 0) goto error; if(H5Fclose(file) < 0) goto error; f = HDopen(filename, O_RDONLY, 0); HDlseek(f, (off_t)offset, SEEK_SET); HDread(f, rdata, sizeof(int)*DSET_DIM1*DSET_DIM2); /* Check that the values read are the same as the values written */ for(i = 0; i < DSET_DIM1; i++) { for(j = 0; j < DSET_DIM2; j++) { if(points[i][j] != rdata[i][j]) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %d,%d\n", i, j); goto error; } } } HDclose(f); PASSED(); } /* end if */ else { SKIPPED(); puts(" Current VFD doesn't support continuous address space"); } /* end else */ return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_compact_io * * Purpose: Tests compact dataset I/O. That is, reading and writing a * complete multi-dimensional array without data type or data * space conversions, without compression, and store in * compact dataset. * * Return: Success: 0 * * Failure: -1 * * Programmer: Raymond Lu * August 8, 2002 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_compact_io(hid_t fapl) { hid_t file, dataset, space, plist; hsize_t dims[2]; int wbuf[16][8], rbuf[16][8]; char filename[FILENAME_BUF_SIZE]; int i, j, n; TESTING("compact dataset I/O"); /* Initialize data */ n = 0; for(i = 0; i < 16; i++) for(j = 0; j < 8; j++) wbuf[i][j] = n++; /* Create a small data space for compact dataset */ dims[0] = 16; dims[1] = 8; if((space = H5Screate_simple(2, dims, NULL)) < 0) TEST_ERROR /* Create a file */ h5_fixname(FILENAME[1], fapl, filename, sizeof filename); if((file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0) TEST_ERROR /* Create property list for compact dataset creation */ if((plist = H5Pcreate(H5P_DATASET_CREATE)) < 0) TEST_ERROR if(H5Pset_layout(plist, H5D_COMPACT) < 0) TEST_ERROR if(H5Pset_alloc_time(plist, H5D_ALLOC_TIME_EARLY) < 0) TEST_ERROR /* Create and write to a compact dataset */ if((dataset = H5Dcreate2(file, DSET_COMPACT_IO_NAME, H5T_NATIVE_INT, space, H5P_DEFAULT, plist, H5P_DEFAULT)) < 0) TEST_ERROR /* Test dataset address. Should be undefined. */ if(H5Dget_offset(dataset) != HADDR_UNDEF) TEST_ERROR if(H5Dwrite(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, wbuf) < 0) TEST_ERROR /* Test dataset address. Should be undefined. */ if(H5Dget_offset(dataset)!=HADDR_UNDEF) TEST_ERROR /* Close file */ if(H5Sclose(space) < 0) TEST_ERROR if(H5Pclose(plist) < 0) TEST_ERROR if(H5Dclose(dataset) < 0) TEST_ERROR if(H5Fclose(file) < 0) TEST_ERROR /* * Open the file and check data */ if((file = H5Fopen(filename, H5F_ACC_RDONLY, fapl)) < 0) TEST_ERROR if((dataset = H5Dopen2(file, DSET_COMPACT_IO_NAME, H5P_DEFAULT)) < 0) TEST_ERROR if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, rbuf) < 0) TEST_ERROR /* Check that the values read are the same as the values written */ for(i = 0; i < 16; i++) for(j = 0; j < 8; j++) if(rbuf[i][j] != wbuf[i][j]) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %d,%d\n", i, j); printf(" wbuf[%d][%d]=%d\n", i, j, wbuf[i][j]); printf(" rbuf[%d][%d]=%d\n", i, j, rbuf[i][j]); goto error; } /* end if */ if(H5Dclose(dataset) < 0) TEST_ERROR if(H5Fclose(file) < 0) TEST_ERROR PASSED(); return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_max_compact * * Purpose: Tests compact dataset of maximal size. * * Return: Success: 0 * Failure: -1 * * Programmer: Raymond Lu * August 8, 2002 * *------------------------------------------------------------------------- */ static herr_t test_max_compact(hid_t fapl) { hid_t file = -1; hid_t dataset = -1; hid_t space = -1; hid_t plist = -1; hsize_t dims[1]; size_t compact_size; int *wbuf = NULL; int *rbuf = NULL; char filename[FILENAME_BUF_SIZE]; int n; size_t u; TESTING("compact dataset of maximal size"); /* Test compact dataset of size 64KB-64 */ /* Initialize data */ compact_size = (SIXTY_FOUR_KB - 64) / sizeof(int); if(NULL == (wbuf = (int *)HDmalloc(sizeof(int) * compact_size))) TEST_ERROR if(NULL == (rbuf = (int *)HDmalloc(sizeof(int) * compact_size))) TEST_ERROR n = 0; for(u = 0; u < compact_size; u++) wbuf[u] = n++; /* Create a small data space for compact dataset */ dims[0] = (hsize_t)compact_size; if((space = H5Screate_simple(1, dims, NULL)) < 0) FAIL_STACK_ERROR /* Create a file */ h5_fixname(FILENAME[3], fapl, filename, sizeof filename); if((file = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0) FAIL_STACK_ERROR /* Create property list for compact dataset creation */ if((plist = H5Pcreate(H5P_DATASET_CREATE)) < 0) FAIL_STACK_ERROR if(H5Pset_layout(plist, H5D_COMPACT) < 0) FAIL_STACK_ERROR /* Create and write to a compact dataset */ if((dataset = H5Dcreate2(file, DSET_COMPACT_MAX_NAME, H5T_NATIVE_INT, space, H5P_DEFAULT, plist, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR if(H5Dwrite(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, wbuf) < 0) FAIL_STACK_ERROR /* Close file */ if(H5Sclose(space) < 0) FAIL_STACK_ERROR if(H5Pclose(plist) < 0) FAIL_STACK_ERROR if(H5Dclose(dataset) < 0) FAIL_STACK_ERROR if(H5Fclose(file) < 0) FAIL_STACK_ERROR /* * Open the file and check data */ if((file = H5Fopen(filename, H5F_ACC_RDONLY, fapl)) < 0) FAIL_STACK_ERROR if((dataset = H5Dopen2(file, DSET_COMPACT_MAX_NAME, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, rbuf) < 0) FAIL_STACK_ERROR /* Check that the values read are the same as the values written */ for(u = 0; u < compact_size; u++) if(rbuf[u] != wbuf[u]) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %u\n", (unsigned)u); goto error; } /* end if */ if(H5Dclose(dataset) < 0) FAIL_STACK_ERROR if(H5Fclose(file) < 0) FAIL_STACK_ERROR HDfree(wbuf); wbuf = NULL; HDfree(rbuf); rbuf = NULL; /* Test compact dataset of size 64KB */ /* Create a data space for compact dataset */ compact_size = SIXTY_FOUR_KB / sizeof(int); dims[0] = (hsize_t)compact_size; if((space = H5Screate_simple(1, dims, NULL)) < 0) FAIL_STACK_ERROR /* Open file */ if((file = H5Fopen(filename, H5F_ACC_RDWR, fapl)) < 0) goto error; /* Create property list for compact dataset creation */ if((plist = H5Pcreate(H5P_DATASET_CREATE)) < 0) FAIL_STACK_ERROR if(H5Pset_layout(plist, H5D_COMPACT) < 0) FAIL_STACK_ERROR /* Create and write to a compact dataset */ H5E_BEGIN_TRY { H5Dcreate2(file, DSET_COMPACT_MAX2_NAME, H5T_NATIVE_INT, space, H5P_DEFAULT, plist, H5P_DEFAULT); } H5E_END_TRY; /* Close file */ if(H5Sclose(space) < 0) FAIL_STACK_ERROR if(H5Pclose(plist) < 0) FAIL_STACK_ERROR if(H5Fclose(file) < 0) FAIL_STACK_ERROR PASSED(); return 0; error: if(wbuf) HDfree(wbuf); if(rbuf) HDfree(rbuf); H5E_BEGIN_TRY { /* Close file */ H5Sclose(space); H5Pclose(plist); H5Fclose(file); H5Dclose(dataset); } H5E_END_TRY; return -1; } /* end test_max_compact() */ /*------------------------------------------------------------------------- * Function: test_conv_buffer * * Purpose: Test size of data type conversion buffer. * * Return: Success: 0 * * Failure: -1 * * Programmer: Raymond Lu * Monday, May 12, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_conv_buffer(hid_t fid) { typedef struct { int a[DIM1][DIM2][DIM3]; float b[DIM2]; double c[DIM3]; } CmpField; typedef struct { float b[DIM2]; double c[DIM3]; } CmpFieldR; herr_t status = -1; int j, k, l; CmpField *cf; CmpFieldR *cfrR; hid_t dataset = -1; /* dataset ID */ hid_t space = -1; /* data space ID */ hid_t ctype1, ctype2; /* data type ID */ hid_t arr_type1, arr_type2, arr_type3, arr_type4, arr_type5; hsize_t dimsa[3]; hsize_t dimsb[1]; hsize_t dimsc[1]; hid_t xfer_list; size_t size; TESTING("data type conversion buffer size"); cf = (CmpField *)HDcalloc((size_t)1, sizeof(CmpField)); /* Populate the data members */ for(j = 0; j < DIM1; j++) for(k = 0; k < DIM2; k++) for(l = 0; l < DIM3; l++) cf->a[j][k][l] = 10*(j+1) + l + k; for(j = 0; j < DIM2; j++) cf->b[j] = (float)(100.*(j+1) + 0.01*j); for(j = 0; j < DIM3; j++) cf->c[j] = 100.*(j+1) + 0.02*j; /* Create data space */ if((space=H5Screate(H5S_SCALAR)) < 0) goto error; /* Add members to the compound data type */ dimsa[0] = DIM1; dimsa[1] = DIM2; dimsa[2] = DIM3; dimsb[0] = DIM2; dimsc[0] = DIM3; /* Create the memory data type */ if((ctype1 = H5Tcreate(H5T_COMPOUND, sizeof (CmpField))) < 0) goto error; if((arr_type1 = H5Tarray_create2(H5T_NATIVE_INT, 3, dimsa)) < 0) goto error; if((arr_type2 = H5Tarray_create2(H5T_NATIVE_FLOAT, 1, dimsb)) < 0) goto error; if((arr_type3 = H5Tarray_create2(H5T_NATIVE_DOUBLE, 1, dimsc)) < 0) goto error; if(H5Tinsert(ctype1, "A", HOFFSET(CmpField, a), arr_type1) < 0) goto error; if(H5Tinsert (ctype1, "B", HOFFSET(CmpField, b), arr_type2) < 0) goto error; if(H5Tinsert (ctype1, "C", HOFFSET(CmpField, c), arr_type3) < 0) goto error; /* Create the dataset */ if((dataset = H5Dcreate2(fid, DSET_CONV_BUF_NAME, ctype1, space, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) goto error; if(H5Dwrite(dataset, ctype1, H5S_ALL, H5S_ALL, H5P_DEFAULT, cf) < 0) goto error; if((ctype2 = H5Tcreate(H5T_COMPOUND, sizeof (CmpFieldR))) < 0) goto error; if((arr_type4 = H5Tarray_create2(H5T_NATIVE_FLOAT, 1, dimsb)) < 0) goto error; if((arr_type5 = H5Tarray_create2(H5T_NATIVE_DOUBLE, 1, dimsc)) < 0) goto error; if(H5Tinsert (ctype2, "B", HOFFSET(CmpFieldR, b), arr_type4) < 0) goto error; if(H5Tinsert (ctype2, "C", HOFFSET(CmpFieldR, c), arr_type5) < 0) goto error; /* Read should succeed since library will set conversion buffer big enough */ cfrR = (CmpFieldR *)HDcalloc((size_t)1, sizeof(CmpFieldR)); if(H5Dread(dataset, ctype2, H5S_ALL, H5S_ALL, H5P_DEFAULT, cfrR) < 0) goto error; /* Read should fail since conversion buffer isn't big enough */ xfer_list = H5Pcreate (H5P_DATASET_XFER); size = (DIM2*DIM3*(sizeof(int))+ DIM2*(sizeof(float))+ DIM3*(sizeof(double))); if(H5Pset_buffer (xfer_list, size, NULL, NULL) < 0) goto error; H5E_BEGIN_TRY { status = H5Dread(dataset, ctype2, H5S_ALL, H5S_ALL, xfer_list, cfrR); } H5E_END_TRY; if(status >= 0) { H5_FAILED(); puts(" Library shouldn't allow conversion buffer too small"); goto error; } /* Read will succeed since conversion buffer is big enough */ size = (DIM1*DIM2*DIM3*(sizeof(int))+ DIM2*(sizeof(float))+ DIM3*(sizeof(double))); if(H5Pset_buffer (xfer_list, size, NULL, NULL) < 0) goto error; if(H5Dread(dataset, ctype2, H5S_ALL, H5S_ALL, xfer_list, cfrR) < 0) goto error; if(H5Pclose(xfer_list) < 0) goto error; if(H5Sclose(space) < 0) goto error; if(H5Tclose(arr_type1) < 0) goto error; if(H5Tclose(arr_type2) < 0) goto error; if(H5Tclose(arr_type3) < 0) goto error; if(H5Tclose(ctype1) < 0) goto error; if(H5Tclose(ctype2) < 0) goto error; if(H5Tclose(arr_type4) < 0) goto error; if(H5Tclose(arr_type5) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; if(cf) HDfree(cf); if(cfrR) HDfree(cfrR); puts(" PASSED"); return(0); error: return -1; } /*------------------------------------------------------------------------- * Function: test_tconv * * Purpose: Test some simple data type conversion stuff. * * Return: Success: 0 * * Failure: -1 * * Programmer: Robb Matzke * Wednesday, January 14, 1998 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_tconv(hid_t file) { char *out = NULL, *in = NULL; hsize_t dims[1]; hid_t space = -1, dataset = -1; int i; if ((out = (char *)HDmalloc((size_t)(4 * 1000 * 1000))) == NULL) goto error; if ((in = (char *)HDmalloc((size_t)(4 * 1000 * 1000))) == NULL) goto error; TESTING("data type conversion"); /* Initialize the dataset */ for(i = 0; i < 1000000; i++) { out[i * 4 + 0] = 0x11; out[i * 4 + 1] = 0x22; out[i * 4 + 2] = 0x33; out[i * 4 + 3] = 0x44; } /* end for */ /* Create the data space */ dims[0] = 1000000; if((space = H5Screate_simple (1, dims, NULL)) < 0) goto error; /* Create the data set */ if((dataset = H5Dcreate2(file, DSET_TCONV_NAME, H5T_STD_I32LE, space, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) goto error; /* Write the data to the dataset */ if(H5Dwrite(dataset, H5T_STD_I32LE, H5S_ALL, H5S_ALL, H5P_DEFAULT, out) < 0) goto error; /* Read data with byte order conversion */ if(H5Dread(dataset, H5T_STD_I32BE, H5S_ALL, H5S_ALL, H5P_DEFAULT, in) < 0) goto error; /* Check */ for(i = 0; i < 1000000; i++) { if(in[4 * i + 0] != out[4 * i + 3] || in[4 * i + 1] != out[4 * i + 2] || in[4 * i + 2] != out[4 * i + 1] || in[4 * i + 3] != out[4 * i + 0]) { H5_FAILED(); puts(" Read with byte order conversion failed."); goto error; } } if(H5Dclose(dataset) < 0) goto error; if(H5Sclose(space) < 0) goto error; HDfree(out); HDfree(in); puts(" PASSED"); return 0; error: if(out) HDfree(out); if(in) HDfree(in); H5E_BEGIN_TRY { H5Dclose(dataset); H5Sclose(space); } H5E_END_TRY; return -1; } /* This message derives from H5Z */ const H5Z_class2_t H5Z_BOGUS[1] = {{ H5Z_CLASS_T_VERS, /* H5Z_class_t version */ H5Z_FILTER_BOGUS, /* Filter id number */ 1, 1, /* Encoding and decoding enabled */ "bogus", /* Filter name for debugging */ NULL, /* The "can apply" callback */ NULL, /* The "set local" callback */ filter_bogus, /* The actual filter function */ }}; /*------------------------------------------------------------------------- * Function: can_apply_bogus * * Purpose: A bogus 'can apply' callback that returns 0 for H5T_NATIVE_DOUBLE * dataype, but returns 1 for all other datatypes * * Return: Success: Described above * Failure: 0 * * Programmer: Quincey Koziol * Friday, April 5, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static htri_t can_apply_bogus(hid_t UNUSED dcpl_id, hid_t type_id, hid_t UNUSED space_id) { if(H5Tequal(type_id,H5T_NATIVE_DOUBLE)) return 0; else if(H5Tequal(type_id,H5T_NATIVE_INT)) return 1; else return -1; } /*------------------------------------------------------------------------- * Function: filter_bogus * * Purpose: A bogus compression method that doesn't do anything. * * Return: Success: Data chunk size * * Failure: 0 * * Programmer: Robb Matzke * Tuesday, April 21, 1998 * * Modifications: * *------------------------------------------------------------------------- */ static size_t filter_bogus(unsigned int UNUSED flags, size_t UNUSED cd_nelmts, const unsigned int UNUSED *cd_values, size_t nbytes, size_t UNUSED *buf_size, void UNUSED **buf) { return nbytes; } /*------------------------------------------------------------------------- * Function: set_local_bogus2 * * Purpose: A 'set local' callback that stores the size of the datatype * and adds it to all the H5T_NATIVE_INT values during * filter operation. * * Return: Success: non-negative * Failure: negative * * Programmer: Quincey Koziol * Friday, April 5, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t set_local_bogus2(hid_t dcpl_id, hid_t type_id, hid_t UNUSED space_id) { unsigned add_on=0; /* Value to add to data going through */ unsigned flags; /* Filter flags */ size_t cd_nelmts=BOGUS2_PERM_NPARMS; /* Number of filter parameters */ unsigned cd_values[4]; /* Filter parameters */ /* Check for native integer datatype and set private property */ if(H5Tequal(type_id,H5T_NATIVE_INT)>0) add_on=(unsigned)H5Tget_size(type_id); /* Get the filter's current parameters */ if(H5Pget_filter_by_id2(dcpl_id, H5Z_FILTER_SET_LOCAL_TEST, &flags, &cd_nelmts, cd_values, (size_t)0, NULL, NULL) < 0) return(FAIL); /* Check that the parameter values were passed along correctly */ if(cd_values[0]!=BOGUS2_PARAM_1) return(FAIL); if(cd_values[1]!=BOGUS2_PARAM_2) return(FAIL); /* Set "local" parameters for this dataset */ cd_values[2]=(unsigned)(add_on>0); /* Flag to indicate data is modified */ cd_values[3]=add_on; /* Amount the data was modified by */ /* Modify the filter's parameters for this dataset */ if(H5Pmodify_filter(dcpl_id, H5Z_FILTER_SET_LOCAL_TEST, flags, (size_t)BOGUS2_ALL_NPARMS, cd_values) < 0) return(FAIL); return(SUCCEED); } /* end set_local_bogus2() */ /*------------------------------------------------------------------------- * Function: filter_bogus2 * * Purpose: A filter method that adds a value to data values on writing * (if the parameter is set), but does not modify data values on * reading (so that correct operation of the filter can be * checked). * * Return: Success: Data chunk size * Failure: 0 * * Programmer: Quincey Koziol * Monday, April 7, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static size_t filter_bogus2(unsigned int flags, size_t cd_nelmts, const unsigned int *cd_values, size_t nbytes, size_t *buf_size, void **buf) { /* Check for the correct number of parameters */ if(cd_nelmts!=BOGUS2_ALL_NPARMS) return(0); /* Check that permanent parameters are set correctly */ if(cd_values[0]!=BOGUS2_PARAM_1) return(0); if(cd_values[1]!=BOGUS2_PARAM_2) return(0); /* Check if this filter is supposed to do something */ if(cd_values[2]>0) { /* Check whether we are "uncompressing" */ if(flags & H5Z_FLAG_REVERSE) { /* Do nothing */ } /* end if */ /* "Compressing" */ else { unsigned add_on=cd_values[3]; /* Get "add on" value */ int *int_ptr=(int *)*buf; /* Pointer to the data values */ size_t buf_left=*buf_size; /* Amount of data buffer left to process */ /* Add the "add on" value to all the data values */ while(buf_left>0) { *int_ptr++ += (int)add_on; buf_left -= sizeof(int); } /* end while */ } /* end else */ return(nbytes); } /* end if */ /* Filter is "no op" */ else return(nbytes); } /*------------------------------------------------------------------------- * Function: filter_bogus3 * * Purpose: A bogus compression method that returns a failure. * * Return: Success: Data chunk size * * Failure: 0 * * Programmer: Raymond Lu * 4 August 2010 * * Modifications: * *------------------------------------------------------------------------- */ static size_t filter_bogus3(unsigned int UNUSED flags, size_t UNUSED cd_nelmts, const unsigned int UNUSED *cd_values, size_t nbytes, size_t UNUSED *buf_size, void UNUSED **buf) { return 0; } /* This message derives from H5Z */ const H5Z_class2_t H5Z_CORRUPT[1] = {{ H5Z_CLASS_T_VERS, /* H5Z_class_t version */ H5Z_FILTER_CORRUPT, /* Filter id number */ 1, 1, /* Encoding and decoding enabled */ "corrupt", /* Filter name for debugging */ NULL, /* The "can apply" callback */ NULL, /* The "set local" callback */ filter_corrupt, /* The actual filter function */ }}; /*------------------------------------------------------------------------- * Function: filter_corrupt * * Purpose: For testing Fletcher32 checksum. modify data slightly during * writing so that when data is read back, the checksum should * fail. * * Return: Success: Data chunk size * * Failure: 0 * * Programmer: Raymond Lu * Jan 14, 2003 * *------------------------------------------------------------------------- */ static size_t filter_corrupt(unsigned int flags, size_t cd_nelmts, const unsigned int *cd_values, size_t nbytes, size_t *buf_size, void **buf) { void *data = NULL; unsigned char *dst = (unsigned char*)(*buf); unsigned int offset; unsigned int length; unsigned int value; size_t ret_value = 0; if(cd_nelmts != 3 || !cd_values) TEST_ERROR offset = cd_values[0]; length = cd_values[1]; value = cd_values[2]; if(offset > nbytes || (offset + length) > nbytes || length < sizeof(unsigned int)) TEST_ERROR if(NULL == (data = HDmalloc((size_t)length))) TEST_ERROR HDmemset(data, (int)value, (size_t)length); if(flags & H5Z_FLAG_REVERSE) { /* Varify data is actually corrupted during read */ dst += offset; if(HDmemcmp(data, dst, (size_t)length) != 0) TEST_ERROR else { *buf_size = nbytes; ret_value = nbytes; } /* end else */ } /* end if */ else { /* Write corrupted data */ dst += offset; HDmemcpy(dst, data, (size_t)length); *buf_size = nbytes; ret_value = *buf_size; } /* end else */ error: if(data) HDfree(data); return ret_value; } /* end filter_corrupt() */ /*------------------------------------------------------------------------- * Function: filter_cb_cont * * Purpose: Callback function to handle checksum failure. Let it continue. * * Return: continue * * Programmer: Raymond Lu * Jan 14, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static H5Z_cb_return_t filter_cb_cont(H5Z_filter_t filter, void UNUSED *buf, size_t UNUSED buf_size, void UNUSED *op_data) { if(H5Z_FILTER_FLETCHER32==filter) return H5Z_CB_CONT; else return H5Z_CB_FAIL; } /*------------------------------------------------------------------------- * Function: filter_cb_fail * * Purpose: Callback function to handle checksum failure. Let it fail. * * Return: fail * * Programmer: Raymond Lu * Jan 14, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static H5Z_cb_return_t filter_cb_fail(H5Z_filter_t filter, void UNUSED *buf, size_t UNUSED buf_size, void UNUSED *op_data) { if(H5Z_FILTER_FLETCHER32==filter) return H5Z_CB_FAIL; else return H5Z_CB_CONT; } /*------------------------------------------------------------------------- * Function: test_filter_internal * * Purpose: Tests dataset compression. If compression is requested when * it hasn't been compiled into the library (such as when * updating an existing compressed dataset) then data is sent to * the file uncompressed but no errors are returned. * * Return: Success: 0 * Failure: -1 * * Programmer: Robb Matzke * Wednesday, April 15, 1998 * * Modifications: * Moved out of main test_compression routine * Quincey Koziol, November 14, 2002 * *------------------------------------------------------------------------- */ static herr_t test_filter_internal(hid_t fid, const char *name, hid_t dcpl, int if_fletcher32, int corrupted, hsize_t *dset_size) { hid_t dataset; /* Dataset ID */ hid_t dxpl; /* Dataset xfer property list ID */ hid_t write_dxpl; /* Dataset xfer property list ID for writing */ hid_t sid; /* Dataspace ID */ const hsize_t size[2] = {DSET_DIM1, DSET_DIM2}; /* Dataspace dimensions */ const hsize_t hs_offset[2] = {FILTER_HS_OFFSET1, FILTER_HS_OFFSET2}; /* Hyperslab offset */ const hsize_t hs_size[2] = {FILTER_HS_SIZE1, FILTER_HS_SIZE2}; /* Hyperslab size */ void *tconv_buf = NULL; /* Temporary conversion buffer */ size_t i, j, n; /* Local index variables */ herr_t status; /* Error status */ /* Create the data space */ if((sid = H5Screate_simple(2, size, NULL)) < 0) goto error; /* * Create a small conversion buffer to test strip mining. We * might as well test all we can! */ if((dxpl = H5Pcreate(H5P_DATASET_XFER)) < 0) goto error; tconv_buf = HDmalloc((size_t)1000); if(H5Pset_buffer(dxpl, (size_t)1000, tconv_buf, NULL) < 0) goto error; if((write_dxpl = H5Pcopy(dxpl)) < 0) TEST_ERROR; if(if_fletcher32==DISABLE_FLETCHER32) { if(H5Pset_edc_check(dxpl, H5Z_DISABLE_EDC) < 0) goto error; if(H5Z_DISABLE_EDC != H5Pget_edc_check(dxpl)) goto error; } TESTING(" filters (setup)"); /* Check if all the filters are available */ if(H5Pall_filters_avail(dcpl)!=TRUE) { H5_FAILED(); printf(" Line %d: Incorrect filter availability\n",__LINE__); goto error; } /* end if */ /* Create the dataset */ if((dataset = H5Dcreate2(fid, name, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) goto error; PASSED(); /*---------------------------------------------------------------------- * STEP 1: Read uninitialized data. It should be zero. *---------------------------------------------------------------------- */ TESTING(" filters (uninitialized read)"); if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check) < 0) TEST_ERROR; for(i=0; i<(size_t)size[0]; i++) { for(j=0; j<(size_t)size[1]; j++) { if(0!=check[i][j]) { H5_FAILED(); printf(" Read a non-zero value.\n"); printf(" At index %lu,%lu\n", (unsigned long)i, (unsigned long)j); goto error; } } } PASSED(); /*---------------------------------------------------------------------- * STEP 2: Test filters by setting up a chunked dataset and writing * to it. *---------------------------------------------------------------------- */ TESTING(" filters (write)"); for(i=n=0; i=0) TEST_ERROR; /* Callback decides to continue inspite data is corrupted. */ if(H5Pset_filter_callback(dxpl, filter_cb_cont, NULL) < 0) TEST_ERROR; if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check) < 0) TEST_ERROR; /* Callback decides to fail when data is corrupted. */ if(H5Pset_filter_callback(write_dxpl, filter_cb_fail, NULL) < 0) TEST_ERROR; /* (Use the "write" DXPL in order to make certain corruption is seen) */ H5E_BEGIN_TRY { status=H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, write_dxpl, check); } H5E_END_TRY; if(status>=0) TEST_ERROR; } else { if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check) < 0) TEST_ERROR; /* Check that the values read are the same as the values written */ for(i=0; i=0) TEST_ERROR; /* Callback decides to continue inspite data is corrupted. */ if(H5Pset_filter_callback(dxpl, filter_cb_cont, NULL) < 0) TEST_ERROR; if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check) < 0) TEST_ERROR; /* Callback decides to fail when data is corrupted. */ if(H5Pset_filter_callback(write_dxpl, filter_cb_fail, NULL) < 0) TEST_ERROR; /* (Use the "write" DXPL in order to make certain corruption is seen) */ H5E_BEGIN_TRY { status=H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, write_dxpl, check); } H5E_END_TRY; if(status>=0) TEST_ERROR; } else { /* Read the dataset back and check it */ if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check) < 0) TEST_ERROR; /* Check that the values read are the same as the values written */ for(i=0; i= 0) TEST_ERROR; /* Callback decides to continue inspite data is corrupted. */ if(H5Pset_filter_callback(dxpl, filter_cb_cont, NULL) < 0) TEST_ERROR; if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check) < 0) TEST_ERROR; /* Callback decides to fail when data is corrupted. */ if(H5Pset_filter_callback(write_dxpl, filter_cb_fail, NULL) < 0) TEST_ERROR; /* (Use the "write" DXPL in order to make certain corruption is seen) */ H5E_BEGIN_TRY { status = H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, write_dxpl, check); } H5E_END_TRY; if(status >= 0) TEST_ERROR; } /* end if */ else { if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check) < 0) TEST_ERROR; /* Check that the values read are the same as the values written */ for(i = 0; i < size[0]; i++) for(j = 0; j < size[1]; j++) if(points[i][j] != check[i][j]) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %lu,%lu\n", (unsigned long)i, (unsigned long)j); goto error; } /* end if */ } /* end else */ PASSED(); /*---------------------------------------------------------------------- * STEP 6: Test partial I/O by writing to and then reading from a * hyperslab of the dataset. The hyperslab does not line up on chunk * boundaries (we know that case already works from above tests). *---------------------------------------------------------------------- */ TESTING(" filters (partial I/O)"); for(i=0; i<(size_t)hs_size[0]; i++) { for(j=0; j<(size_t)hs_size[1]; j++) { points[(size_t)hs_offset[0]+i][(size_t)hs_offset[1]+j] = (int)HDrandom(); } } if(H5Sselect_hyperslab(sid, H5S_SELECT_SET, hs_offset, NULL, hs_size, NULL) < 0) TEST_ERROR; /* (Use the "read" DXPL because partial I/O on corrupted data test needs to ignore errors during writing) */ if(H5Dwrite (dataset, H5T_NATIVE_INT, sid, sid, dxpl, points) < 0) TEST_ERROR; if(corrupted) { /* Default behavior is failure when data is corrupted. */ /* (Use the "write" DXPL in order to make certain corruption is seen) */ H5E_BEGIN_TRY { status=H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, write_dxpl, check); } H5E_END_TRY; if(status>=0) TEST_ERROR; /* Callback decides to continue inspite data is corrupted. */ if(H5Pset_filter_callback(dxpl, filter_cb_cont, NULL) < 0) TEST_ERROR; if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, dxpl, check) < 0) TEST_ERROR; /* Callback decides to fail when data is corrupted. */ if(H5Pset_filter_callback(write_dxpl, filter_cb_fail, NULL) < 0) TEST_ERROR; /* (Use the "write" DXPL in order to make certain corruption is seen) */ H5E_BEGIN_TRY { status=H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, write_dxpl, check); } H5E_END_TRY; if(status>=0) TEST_ERROR; } else { if(H5Dread (dataset, H5T_NATIVE_INT, sid, sid, dxpl, check) < 0) TEST_ERROR; /* Check that the values read are the same as the values written */ for(i=0; i<(size_t)hs_size[0]; i++) { for(j=0; j<(size_t)hs_size[1]; j++) { if(points[(size_t)hs_offset[0]+i][(size_t)hs_offset[1]+j] != check[(size_t)hs_offset[0]+i][(size_t)hs_offset[1]+j]) { H5_FAILED(); fprintf(stderr," Read different values than written.\n"); fprintf(stderr," At index %lu,%lu\n", (unsigned long)((size_t)hs_offset[0]+i), (unsigned long)((size_t)hs_offset[1]+j)); fprintf(stderr," At original: %d\n", (int)points[(size_t)hs_offset[0]+i][(size_t)hs_offset[1]+j]); fprintf(stderr," At returned: %d\n", (int)check[(size_t)hs_offset[0]+i][(size_t)hs_offset[1]+j]); goto error; } } } } PASSED(); /* Get the storage size of the dataset */ if((*dset_size=H5Dget_storage_size(dataset))==0) goto error; /* Clean up objects used for this test */ if(H5Dclose (dataset) < 0) goto error; if(H5Sclose (sid) < 0) goto error; if(H5Pclose (dxpl) < 0) goto error; free (tconv_buf); return(0); error: if(tconv_buf) free (tconv_buf); return -1; } /*------------------------------------------------------------------------- * Function: test_filter_noencoder * * Purpose: Tests filters with no encoder present. Ensures that data * can still be decoded correctly and that errors are thrown * when the application tries to write. * * Return: Success: 0 * Failure: -1 * * Programmer: Nat Furrer and James Laird * Monday, June 7, 2004 * * Modifications: * Make copy of data file since the test writes to the file. * Larry Knox, October 14, 2009 * *------------------------------------------------------------------------- */ #ifdef H5_HAVE_FILTER_SZIP static herr_t test_filter_noencoder(const char *dset_name) { hid_t file_id = -1; hid_t dset_id = -1; hid_t test_dset_id = -1; hid_t dcpl_id = -1; hid_t space_id = -1; hsize_t dims = 10; herr_t err; int test_ints[10] = { 12 }; int read_buf[10]; int i; /* Make a local copy of the file since this test writes to the data file from svn. */ if (h5_make_local_copy(NOENCODER_FILENAME, NOENCODER_COPY_FILENAME) < 0) goto error; /* Open file */ file_id = H5Fopen(NOENCODER_COPY_FILENAME, H5F_ACC_RDWR, H5P_DEFAULT); if(file_id < 0) goto error; dset_id = H5Dopen2(file_id, dset_name, H5P_DEFAULT); if(dset_id < 0) goto error; space_id = H5Screate_simple(1, &dims, NULL); if(space_id < 0) goto error; TESTING(" decoding without encoder"); /* Read the dataset and make sure the decoder is working correctly */ err = H5Dread(dset_id, H5T_NATIVE_INT, space_id, space_id, H5P_DEFAULT, read_buf); if(err < 0) goto error; for(i = 0; i < 10; i++) if(read_buf[i] != i) goto error; H5Sclose(space_id); PASSED(); /* Attempt to copy the DCPL and use it to create a new dataset. * Since the filter does not have an encoder, the creation * should fail. */ TESTING(" trying to write without encoder"); dcpl_id = H5Dget_create_plist(dset_id); if(dcpl_id < 0) goto error; space_id = H5Screate_simple(1, &dims, NULL); if(space_id < 0) goto error; H5E_BEGIN_TRY{ test_dset_id = H5Dcreate2(file_id, NOENCODER_TEST_DATASET, H5T_NATIVE_INT, space_id, H5P_DEFAULT, dcpl_id, H5P_DEFAULT); }H5E_END_TRY if(test_dset_id >= 0) goto error; /* Attempt to extend the dataset. This should fail because * the dataset has a fill value and is instructed to fill on * allocation. */ dims = 20; /* Dataset is originally of size 10 */ H5E_BEGIN_TRY{ err = H5Dset_extent(dset_id, &dims); }H5E_END_TRY if(err >= 0) goto error; /* Attempt to write to the dataset. This should fail because * the filter does not have an encoder. */ H5E_BEGIN_TRY{ err = H5Dwrite(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, test_ints); }H5E_END_TRY if(err >= 0) goto error; H5Fclose(file_id); H5Dclose(dset_id); H5Sclose(space_id); H5Pclose(dcpl_id); PASSED(); return 0; error: H5_FAILED(); if(dset_id != -1) H5Dclose(dset_id); if(test_dset_id != -1) H5Dclose(test_dset_id); if(space_id != -1) H5Sclose(space_id); if(dcpl_id != -1) H5Pclose(dcpl_id); if(file_id != -1) H5Fclose(file_id); return -1; } #endif /* H5_HAVE_FILTER_SZIP */ /*------------------------------------------------------------------------- * Function: test_get_filter_info * * Purpose: Tests the H5Zget_filter_info function. * * Return: Success: 0 * Failure: -1 * * Programmer: Nat Furrer and James Laird * Thursday, June 10, 2004 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_get_filter_info(void) { unsigned int flags; /* flags returned from H5Zget_filter_info */ herr_t err; TESTING("H5Zget_filter_info"); /* Verify that each filter is reported as having the right combination * of encoder and decoder. */ #ifdef H5_HAVE_FILTER_FLETCHER32 if(H5Zget_filter_info(H5Z_FILTER_FLETCHER32, &flags) < 0) TEST_ERROR if(((flags & H5Z_FILTER_CONFIG_ENCODE_ENABLED) == 0) || ((flags & H5Z_FILTER_CONFIG_DECODE_ENABLED) == 0)) TEST_ERROR #endif #ifdef H5_HAVE_FILTER_SHUFFLE if(H5Zget_filter_info(H5Z_FILTER_SHUFFLE, &flags) < 0) TEST_ERROR if(((flags & H5Z_FILTER_CONFIG_ENCODE_ENABLED) == 0) || ((flags & H5Z_FILTER_CONFIG_DECODE_ENABLED) == 0)) TEST_ERROR #endif #ifdef H5_HAVE_FILTER_DEFLATE if(H5Zget_filter_info(H5Z_FILTER_DEFLATE, &flags) < 0) TEST_ERROR if(((flags & H5Z_FILTER_CONFIG_ENCODE_ENABLED) == 0) || ((flags & H5Z_FILTER_CONFIG_DECODE_ENABLED) == 0)) TEST_ERROR #endif #ifdef H5_HAVE_FILTER_SZIP if(H5Zget_filter_info(H5Z_FILTER_SZIP, &flags) < 0) TEST_ERROR if(SZ_encoder_enabled()) { if(((flags & H5Z_FILTER_CONFIG_ENCODE_ENABLED) == 0) || ((flags & H5Z_FILTER_CONFIG_DECODE_ENABLED) == 0)) TEST_ERROR } /* end if */ else { if(((flags & H5Z_FILTER_CONFIG_ENCODE_ENABLED) != 0) || ((flags & H5Z_FILTER_CONFIG_DECODE_ENABLED) == 0)) TEST_ERROR } /* end else */ #endif /* H5_HAVE_FILTER_SZIP */ /* Verify that get_filter_info throws an error when given a bad filter */ /* (Depends on 1.6 compatibility flag) */ H5E_BEGIN_TRY { err = H5Zget_filter_info(-1, &flags); } H5E_END_TRY; if(err >= 0) TEST_ERROR PASSED(); return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_filters * * Purpose: Tests dataset filter. * * Return: Success: 0 * Failure: -1 * * Programmer: Robb Matzke * Wednesday, April 15, 1998 * * Modifications: * Moved guts of filter testing out of main routine. * Tests shuffle, deflate, fletcher32 checksum filters. * Quincey Koziol, November 14, 2002 * * Added Fletcher32 filter testing * Raymond Lu, Jan 22, 2002 * *------------------------------------------------------------------------- */ static herr_t test_filters(hid_t file, hid_t #ifndef H5_HAVE_FILTER_SZIP UNUSED #endif /* H5_HAVE_FILTER_SZIP */ fapl) { hid_t dc; /* Dataset creation property list ID */ const hsize_t chunk_size[2] = {FILTER_CHUNK_DIM1, FILTER_CHUNK_DIM2}; /* Chunk dimensions */ hsize_t null_size; /* Size of dataset with null filter */ #ifdef H5_HAVE_FILTER_FLETCHER32 hsize_t fletcher32_size; /* Size of dataset with Fletcher32 checksum */ unsigned data_corrupt[3]; /* position and length of data to be corrupted */ #endif /* H5_HAVE_FILTER_FLETCHER32 */ #ifdef H5_HAVE_FILTER_DEFLATE hsize_t deflate_size; /* Size of dataset with deflate filter */ #endif /* H5_HAVE_FILTER_DEFLATE */ #ifdef H5_HAVE_FILTER_SZIP hsize_t szip_size; /* Size of dataset with szip filter */ unsigned szip_options_mask=H5_SZIP_NN_OPTION_MASK; unsigned szip_pixels_per_block=4; #endif /* H5_HAVE_FILTER_SZIP */ #ifdef H5_HAVE_FILTER_SHUFFLE hsize_t shuffle_size; /* Size of dataset with shuffle filter */ #endif /* H5_HAVE_FILTER_SHUFFLE */ #if(defined H5_HAVE_FILTER_DEFLATE | defined H5_HAVE_FILTER_SZIP) && defined H5_HAVE_FILTER_SHUFFLE && defined H5_HAVE_FILTER_FLETCHER32 hsize_t combo_size; /* Size of dataset with shuffle+deflate filter */ #endif /* H5_HAVE_FILTER_DEFLATE && H5_HAVE_FILTER_SHUFFLE && H5_HAVE_FILTER_FLETCHER32 */ /* test the H5Zget_filter_info function */ if(test_get_filter_info() < 0) goto error; /*---------------------------------------------------------- * STEP 0: Test null I/O filter by itself. *---------------------------------------------------------- */ puts("Testing 'null' filter"); if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk (dc, 2, chunk_size) < 0) goto error; if(H5Zregister (H5Z_BOGUS) < 0) goto error; if(H5Pset_filter(dc, H5Z_FILTER_BOGUS, 0, (size_t)0, NULL) < 0) goto error; if(test_filter_internal(file,DSET_BOGUS_NAME,dc,DISABLE_FLETCHER32,DATA_NOT_CORRUPTED,&null_size) < 0) goto error; /* Clean up objects used for this test */ if(H5Pclose (dc) < 0) goto error; /*---------------------------------------------------------- * STEP 1: Test Fletcher32 Checksum by itself. *---------------------------------------------------------- */ #ifdef H5_HAVE_FILTER_FLETCHER32 puts("Testing Fletcher32 checksum(enabled for read)"); if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk (dc, 2, chunk_size) < 0) goto error; if(H5Pset_filter(dc, H5Z_FILTER_FLETCHER32, 0, (size_t)0, NULL) < 0) goto error; /* Enable checksum during read */ if(test_filter_internal(file,DSET_FLETCHER32_NAME,dc,ENABLE_FLETCHER32,DATA_NOT_CORRUPTED,&fletcher32_size) < 0) goto error; if(fletcher32_size<=null_size) { H5_FAILED(); puts(" Size after checksumming is incorrect."); goto error; } /* end if */ /* Disable checksum during read */ puts("Testing Fletcher32 checksum(disabled for read)"); if(test_filter_internal(file,DSET_FLETCHER32_NAME_2,dc,DISABLE_FLETCHER32,DATA_NOT_CORRUPTED,&fletcher32_size) < 0) goto error; if(fletcher32_size<=null_size) { H5_FAILED(); puts(" Size after checksumming is incorrect."); goto error; } /* end if */ /* Try to corrupt data and see if checksum fails */ puts("Testing Fletcher32 checksum(when data is corrupted)"); data_corrupt[0] = 52; data_corrupt[1] = 33; data_corrupt[2] = 27; if(H5Zregister (H5Z_CORRUPT) < 0) goto error; if(H5Pset_filter(dc, H5Z_FILTER_CORRUPT, 0, (size_t)3, data_corrupt) < 0) goto error; if(test_filter_internal(file,DSET_FLETCHER32_NAME_3,dc,DISABLE_FLETCHER32,DATA_CORRUPTED,&fletcher32_size) < 0) goto error; if(fletcher32_size<=null_size) { H5_FAILED(); puts(" Size after checksumming is incorrect."); goto error; } /* end if */ /* Clean up objects used for this test */ if(H5Pclose (dc) < 0) goto error; #else /* H5_HAVE_FILTER_FLETCHER32 */ TESTING("fletcher32 checksum"); SKIPPED(); puts(" Fletcher32 checksum not enabled"); #endif /* H5_HAVE_FILTER_FLETCHER32 */ /*---------------------------------------------------------- * STEP 2: Test deflation by itself. *---------------------------------------------------------- */ #ifdef H5_HAVE_FILTER_DEFLATE puts("Testing deflate filter"); if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk (dc, 2, chunk_size) < 0) goto error; if(H5Pset_deflate (dc, 6) < 0) goto error; if(test_filter_internal(file,DSET_DEFLATE_NAME,dc,DISABLE_FLETCHER32,DATA_NOT_CORRUPTED,&deflate_size) < 0) goto error; /* Clean up objects used for this test */ if(H5Pclose (dc) < 0) goto error; #else /* H5_HAVE_FILTER_DEFLATE */ TESTING("deflate filter"); SKIPPED(); puts(" Deflate filter not enabled"); #endif /* H5_HAVE_FILTER_DEFLATE */ /*---------------------------------------------------------- * STEP 3: Test szip compression by itself. *---------------------------------------------------------- */ #ifdef H5_HAVE_FILTER_SZIP TESTING("szip filter (with encoder)"); if( h5_szip_can_encode() == 1) { if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk (dc, 2, chunk_size) < 0) goto error; puts(""); if(H5Pset_szip(dc, szip_options_mask, szip_pixels_per_block) < 0) goto error; if(test_filter_internal(file,DSET_SZIP_NAME,dc,DISABLE_FLETCHER32,DATA_NOT_CORRUPTED,&szip_size) < 0) goto error; if(H5Pclose (dc) < 0) goto error; } else { SKIPPED(); } TESTING("szip filter (without encoder)"); if( h5_szip_can_encode() != 1) { puts(""); if(test_filter_noencoder(NOENCODER_SZIP_DATASET) < 0) goto error; } else { SKIPPED(); } #else /* H5_HAVE_FILTER_SZIP */ TESTING("szip filter"); SKIPPED(); puts(" Szip filter not enabled"); #endif /* H5_HAVE_FILTER_SZIP */ /*---------------------------------------------------------- * STEP 4: Test shuffling by itself. *---------------------------------------------------------- */ #ifdef H5_HAVE_FILTER_SHUFFLE puts("Testing shuffle filter"); if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk (dc, 2, chunk_size) < 0) goto error; if(H5Pset_shuffle (dc) < 0) goto error; if(test_filter_internal(file,DSET_SHUFFLE_NAME,dc,DISABLE_FLETCHER32,DATA_NOT_CORRUPTED,&shuffle_size) < 0) goto error; if(shuffle_size!=null_size) { H5_FAILED(); puts(" Shuffled size not the same as uncompressed size."); goto error; } /* end if */ /* Clean up objects used for this test */ if(H5Pclose (dc) < 0) goto error; #else /* H5_HAVE_FILTER_SHUFFLE */ TESTING("shuffle filter"); SKIPPED(); puts(" Shuffle filter not enabled"); #endif /* H5_HAVE_FILTER_SHUFFLE */ /*---------------------------------------------------------- * STEP 5: Test shuffle + deflate + checksum in any order. *---------------------------------------------------------- */ #if defined H5_HAVE_FILTER_DEFLATE && defined H5_HAVE_FILTER_SHUFFLE && defined H5_HAVE_FILTER_FLETCHER32 puts("Testing shuffle+deflate+checksum filters(checksum first)"); if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk (dc, 2, chunk_size) < 0) goto error; if(H5Pset_fletcher32 (dc) < 0) goto error; if(H5Pset_shuffle (dc) < 0) goto error; if(H5Pset_deflate (dc, 6) < 0) goto error; if(test_filter_internal(file,DSET_SHUF_DEF_FLET_NAME,dc,ENABLE_FLETCHER32,DATA_NOT_CORRUPTED,&combo_size) < 0) goto error; /* Clean up objects used for this test */ if(H5Pclose (dc) < 0) goto error; puts("Testing shuffle+deflate+checksum filters(checksum last)"); if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk (dc, 2, chunk_size) < 0) goto error; if(H5Pset_shuffle (dc) < 0) goto error; if(H5Pset_deflate (dc, 6) < 0) goto error; if(H5Pset_fletcher32 (dc) < 0) goto error; if(test_filter_internal(file,DSET_SHUF_DEF_FLET_NAME_2,dc,ENABLE_FLETCHER32,DATA_NOT_CORRUPTED,&combo_size) < 0) goto error; /* Clean up objects used for this test */ if(H5Pclose (dc) < 0) goto error; #else /* H5_HAVE_FILTER_DEFLATE && H5_HAVE_FILTER_SHUFFLE && H5_HAVE_FILTER_FLETCHER32 */ TESTING("shuffle+deflate+fletcher32 filters"); SKIPPED(); puts(" Deflate, shuffle, or fletcher32 checksum filter not enabled"); #endif /* H5_HAVE_FILTER_DEFLATE && H5_HAVE_FILTER_SHUFFLE && H5_HAVE_FILTER_FLETCHER32 */ /*---------------------------------------------------------- * STEP 6: Test shuffle + szip + checksum in any order. *---------------------------------------------------------- */ #if defined H5_HAVE_FILTER_SZIP && defined H5_HAVE_FILTER_SHUFFLE && defined H5_HAVE_FILTER_FLETCHER32 TESTING("shuffle+szip+checksum filters(checksum first, with encoder)"); if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk (dc, 2, chunk_size) < 0) goto error; if(H5Pset_fletcher32 (dc) < 0) goto error; if(H5Pset_shuffle (dc) < 0) goto error; /* Make sure encoding is enabled */ if( h5_szip_can_encode() == 1) { puts(""); if(H5Pset_szip(dc, szip_options_mask, szip_pixels_per_block) < 0) goto error; if(test_filter_internal(file,DSET_SHUF_SZIP_FLET_NAME,dc,ENABLE_FLETCHER32,DATA_NOT_CORRUPTED,&combo_size) < 0) goto error; } else { SKIPPED(); } TESTING("shuffle+szip+checksum filters(checksum first, without encoder)"); if( h5_szip_can_encode() != 1) { puts(""); if(test_filter_noencoder(NOENCODER_SZIP_SHUFF_FLETCH_DATASET) < 0) goto error; } else { SKIPPED(); } /* Clean up objects used for this test */ if(H5Pclose (dc) < 0) goto error; TESTING("shuffle+szip+checksum filters(checksum last, with encoder)"); /* Make sure encoding is enabled */ if( h5_szip_can_encode() == 1) { puts(""); if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk (dc, 2, chunk_size) < 0) goto error; if(H5Pset_shuffle (dc) < 0) goto error; if(H5Pset_szip(dc, szip_options_mask, szip_pixels_per_block) < 0) goto error; if(H5Pset_fletcher32 (dc) < 0) goto error; if(test_filter_internal(file,DSET_SHUF_SZIP_FLET_NAME_2,dc,ENABLE_FLETCHER32,DATA_NOT_CORRUPTED,&combo_size) < 0) goto error; /* Clean up objects used for this test */ if(H5Pclose (dc) < 0) goto error; } else { SKIPPED(); } #else /* H5_HAVE_FILTER_SZIP && H5_HAVE_FILTER_SHUFFLE && H5_HAVE_FILTER_FLETCHER32 */ TESTING("shuffle+szip+fletcher32 filters"); SKIPPED(); puts(" Szip, shuffle, or fletcher32 checksum filter not enabled"); #endif /* H5_HAVE_FILTER_SZIP && H5_HAVE_FILTER_SHUFFLE && H5_HAVE_FILTER_FLETCHER32 */ return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_missing_filter * * Purpose: Tests library behavior when filter is missing * * Return: Success: 0 * Failure: -1 * * Programmer: Quincey Koziol * Thursday, November 14, 2002 * *------------------------------------------------------------------------- */ static herr_t test_missing_filter(hid_t file) { hid_t fid; /* File ID */ hid_t dsid; /* Dataset ID */ hid_t sid; /* Dataspace ID */ hid_t dcpl; /* Dataspace creation property list ID */ const hsize_t dims[2] = {DSET_DIM1, DSET_DIM2}; /* Dataspace dimensions */ const hsize_t chunk_dims[2] = {2, 25}; /* Chunk dimensions */ hsize_t dset_size; /* Dataset size */ size_t i,j; /* Local index variables */ herr_t ret; /* Generic return value */ const char *testfile = H5_get_srcdir_filename(FILE_DEFLATE_NAME); /* Corrected test file name */ TESTING("dataset access with missing filter"); /* Unregister the deflate filter */ #ifdef H5_HAVE_FILTER_DEFLATE /* Verify deflate filter is registered currently */ if(H5Zfilter_avail(H5Z_FILTER_DEFLATE)!=TRUE) { H5_FAILED(); printf(" Line %d: Deflate filter not available\n",__LINE__); goto error; } /* end if */ /* Unregister deflate filter (use internal function) */ if(H5Z_unregister(H5Z_FILTER_DEFLATE) < 0) { H5_FAILED(); printf(" Line %d: Can't unregister deflate filter\n",__LINE__); goto error; } /* end if */ #endif /* H5_HAVE_FILTER_DEFLATE */ /* Verify deflate filter is not registered currently */ if(H5Zfilter_avail(H5Z_FILTER_DEFLATE)!=FALSE) { H5_FAILED(); printf(" Line %d: Deflate filter available\n",__LINE__); goto error; } /* end if */ /* Create dcpl with deflate filter */ if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) { H5_FAILED(); printf(" Line %d: Can't create dcpl\n",__LINE__); goto error; } /* end if */ if(H5Pset_chunk(dcpl, 2, chunk_dims) < 0) { H5_FAILED(); printf(" Line %d: Can't set chunk sizes\n",__LINE__); goto error; } /* end if */ if(H5Pset_deflate(dcpl, 9) < 0) { H5_FAILED(); printf(" Line %d: Can't set deflate filter\n",__LINE__); goto error; } /* end if */ /* Check if all the filters are available */ ret=H5Pall_filters_avail(dcpl); if(ret<0) { H5_FAILED(); printf(" Line %d: Can't check filter availability\n",__LINE__); goto error; } /* end if */ if(ret!=FALSE) { H5_FAILED(); printf(" Line %d: Filter shouldn't be available\n",__LINE__); goto error; } /* end if */ /* Create the data space */ if((sid = H5Screate_simple(2, dims, NULL)) < 0) { H5_FAILED(); printf(" Line %d: Can't open dataspace\n",__LINE__); goto error; } /* end if */ /* Create new dataset */ if((dsid = H5Dcreate2(file, DSET_MISSING_NAME, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) { H5_FAILED(); printf(" Line %d: Can't create dataset\n",__LINE__); goto error; } /* end if */ /* Write data */ if(H5Dwrite(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, points) < 0) { H5_FAILED(); printf(" Line %d: Error writing dataset data\n",__LINE__); goto error; } /* end if */ /* Flush the file (to clear the cache) */ if(H5Fflush(file, H5F_SCOPE_GLOBAL) < 0) { H5_FAILED(); printf(" Line %d: Error flushing file\n",__LINE__); goto error; } /* end if */ /* Query the dataset's size on disk */ if((dset_size=H5Dget_storage_size(dsid))==0) { H5_FAILED(); printf(" Line %d: Error querying dataset size, dset_size=%lu\n",__LINE__,(unsigned long)dset_size); goto error; } /* end if */ /* Verify that the size indicates data is uncompressed */ /* (i.e. the deflation filter we asked for was silently ignored) */ if((H5Tget_size(H5T_NATIVE_INT)*DSET_DIM1*DSET_DIM2)!=dset_size) { H5_FAILED(); printf(" Line %d: Incorrect dataset size: %lu\n",__LINE__,(unsigned long)dset_size); goto error; } /* end if */ /* Read data */ if(H5Dread(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, check) < 0) { H5_FAILED(); printf(" Line %d: Error reading dataset data\n",__LINE__); goto error; } /* end if */ /* Compare data */ /* Check that the values read are the same as the values written */ for(i=0; i<(size_t)dims[0]; i++) { for(j=0; j<(size_t)dims[1]; j++) { if(points[i][j] != check[i][j]) { H5_FAILED(); printf(" Line %d: Read different values than written.\n",__LINE__); printf(" At index %lu,%lu\n", (unsigned long)(i), (unsigned long)(j)); printf(" At original: %d\n",points[i][j]); printf(" At returned: %d\n",check[i][j]); goto error; } /* end if */ } /* end for */ } /* end for */ /* Close dataset */ if(H5Dclose(dsid) < 0) { H5_FAILED(); printf(" Line %d: Can't close dataset\n",__LINE__); goto error; } /* end if */ /* Close dataspace */ if(H5Sclose(sid) < 0) { H5_FAILED(); printf(" Line %d: Can't close dataspace\n",__LINE__); goto error; } /* end if */ /* Close dataset creation property list */ if(H5Pclose(dcpl) < 0) { H5_FAILED(); printf(" Line %d: Can't close dcpl\n",__LINE__); goto error; } /* end if */ /* Try reading existing dataset with deflate filter */ /* Open existing file */ if((fid = H5Fopen(testfile, H5F_ACC_RDONLY, H5P_DEFAULT)) < 0) { H5_FAILED(); printf(" Line %d: Can't open existing deflated file\n", __LINE__); goto error; } /* end if */ /* Open dataset */ if((dsid = H5Dopen2(fid, "Dataset1", H5P_DEFAULT)) < 0) { H5_FAILED(); printf(" Line %d: Can't open dataset\n", __LINE__); goto error; } /* end if */ /* Read data (should fail, since deflate filter is missing) */ H5E_BEGIN_TRY { ret = H5Dread(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, check); } H5E_END_TRY; if(ret>=0) { H5_FAILED(); printf(" Line %d: Should not be able to read dataset data\n", __LINE__); goto error; } /* end if */ /* Close dataset */ if(H5Dclose(dsid) < 0) { H5_FAILED(); printf(" Line %d: Can't close dataset\n", __LINE__); goto error; } /* end if */ /* Close existing file */ if(H5Fclose(fid) < 0) { H5_FAILED(); printf(" Line %d: Can't close file\n", __LINE__); goto error; } /* end if */ /* Re-register the deflate filter */ /* Verify deflate filter is not registered currently */ if(H5Zfilter_avail(H5Z_FILTER_DEFLATE)!=FALSE) { H5_FAILED(); printf(" Line %d: Deflate filter available\n",__LINE__); goto error; } /* end if */ #ifdef H5_HAVE_FILTER_DEFLATE /* Register deflate filter (use internal function to avoid range checks) */ if(H5Z_register(H5Z_DEFLATE) < 0) { H5_FAILED(); printf(" Line %d: Can't unregister deflate filter\n",__LINE__); goto error; } /* end if */ /* Verify deflate filter is registered currently */ if(H5Zfilter_avail(H5Z_FILTER_DEFLATE)!=TRUE) { H5_FAILED(); printf(" Line %d: Deflate filter not available\n",__LINE__); goto error; } /* end if */ #endif /* H5_HAVE_FILTER_DEFLATE */ PASSED(); return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_onebyte_shuffle * * Purpose: Tests the 8-bit array with shuffling algorithm. * The shuffled array should be the same result as * that before the shuffling. * * Return: Success: 0 * * Failure: -1 * * Programmer: Kent Yang * Wednesday, Nov. 13th, 2002 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_onebyte_shuffle(hid_t file) { #ifdef H5_HAVE_FILTER_SHUFFLE hid_t dataset, space,dc; const hsize_t size[2] = {10, 20}; const hsize_t chunk_size[2] = {10, 20}; unsigned char orig_data[10][20]; unsigned char new_data[10][20]; size_t i, j; #else /* H5_HAVE_FILTER_SHUFFLE */ const char *not_supported= " Data shuffling is not enabled."; #endif /* H5_HAVE_FILTER_SHUFFLE */ TESTING("8-bit shuffling (setup)"); #ifdef H5_HAVE_FILTER_SHUFFLE /* Create the data space */ if((space = H5Screate_simple(2, size, NULL)) < 0) goto error; /* Use shuffling algorithm with 8-bit */ if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk (dc, 2, chunk_size) < 0) goto error; if(H5Pset_shuffle (dc) < 0) goto error; /* Create the dataset */ if((dataset = H5Dcreate2(file, DSET_ONEBYTE_SHUF_NAME, H5T_NATIVE_UCHAR, space, H5P_DEFAULT, dc, H5P_DEFAULT)) < 0) goto error; for(i= 0;i< 10; i++) for(j = 0; j < 20; j++) orig_data[i][j] = (unsigned char)HDrandom(); PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 1: Test shuffling by setting up a chunked dataset and writing * to it. *---------------------------------------------------------------------- */ TESTING("8-bit shuffling (write)"); #ifdef H5_HAVE_FILTER_SHUFFLE if(H5Dwrite(dataset, H5T_NATIVE_UCHAR, H5S_ALL, H5S_ALL, H5P_DEFAULT, orig_data) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 2: Try to read the data we just wrote. *---------------------------------------------------------------------- */ TESTING("8-bit shuffling (read)"); #ifdef H5_HAVE_FILTER_SHUFFLE /* Read the dataset back */ if(H5Dread(dataset, H5T_NATIVE_UCHAR, H5S_ALL, H5S_ALL, H5P_DEFAULT, new_data) < 0) goto error; /* Check that the values read are the same as the values written */ for(i=0; i<(size_t)size[0]; i++) { for(j=0; j<(size_t)size[1]; j++) { if(new_data[i][j] != orig_data[i][j]) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %lu,%lu\n", (unsigned long)i, (unsigned long)j); goto error; } } } /*---------------------------------------------------------------------- * Cleanup *---------------------------------------------------------------------- */ if(H5Pclose (dc) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_nbit_int * * Purpose: Tests the integer datatype for nbit filter * * Return: Success: 0 * * Failure: -1 * * Programmer: Xiaowen Wu * Wednesday, Dec. 23th, 2004 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_nbit_int(hid_t file) { #ifdef H5_HAVE_FILTER_NBIT hid_t dataset, datatype, mem_datatype, space, dc; hsize_t size[2] = {2, 5}; hsize_t chunk_size[2] = {2,5}; int orig_data[2][5]; int new_data[2][5]; unsigned int mask; size_t precision, offset; size_t i, j; #else /* H5_HAVE_FILTER_NBIT */ const char *not_supported= " Nbit is not enabled."; #endif /* H5_HAVE_FILTER_NBIT */ puts("Testing nbit filter"); TESTING(" nbit int (setup)"); #ifdef H5_HAVE_FILTER_NBIT /* Define dataset datatype (integer), and set precision, offset */ datatype = H5Tcopy(H5T_NATIVE_INT); precision = 17; /* precision includes sign bit */ if(H5Tset_precision(datatype,precision) < 0) goto error; offset = 4; if(H5Tset_offset(datatype,offset) < 0) goto error; /* Copy to memory datatype before setting order */ mem_datatype = H5Tcopy(datatype); /* Set order of dataset datatype */ if(H5Tset_order(datatype, H5T_ORDER_BE) < 0) goto error; /* Create the data space */ if((space = H5Screate_simple(2, size, NULL)) < 0) goto error; /* Use nbit filter */ if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk(dc, 2, chunk_size) < 0) goto error; if(H5Pset_nbit(dc) < 0) goto error; /* Create the dataset */ if((dataset = H5Dcreate2(file, DSET_NBIT_INT_NAME, datatype, space, H5P_DEFAULT, dc, H5P_DEFAULT)) < 0) goto error; /* Initialize data, assuming size of long long >= size of int */ for(i= 0;i< (size_t)size[0]; i++) for(j = 0; j < (size_t)size[1]; j++) { orig_data[i][j] = (int)(((long long)HDrandom() % (long long)HDpow(2.0, (double)(precision - 1))) << offset); /* even-numbered values are negtive */ if((i*size[1]+j+1)%2 == 0) orig_data[i][j] = -orig_data[i][j]; } PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 1: Test nbit by setting up a chunked dataset and writing * to it. *---------------------------------------------------------------------- */ TESTING(" nbit int (write)"); #ifdef H5_HAVE_FILTER_NBIT if(H5Dwrite(dataset, mem_datatype, H5S_ALL, H5S_ALL, H5P_DEFAULT, orig_data) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 2: Try to read the data we just wrote. *---------------------------------------------------------------------- */ TESTING(" nbit int (read)"); #ifdef H5_HAVE_FILTER_NBIT /* Read the dataset back */ if(H5Dread(dataset, mem_datatype, H5S_ALL, H5S_ALL, H5P_DEFAULT, new_data) < 0) goto error; /* Check that the values read are the same as the values written * Use mask for checking the significant bits, ignoring the padding bits */ mask = ~((unsigned)~0 << (precision + offset)) & ((unsigned)~0 << offset); for(i=0; i<(size_t)size[0]; i++) { for(j=0; j<(size_t)size[1]; j++) { if((new_data[i][j] & mask) != (orig_data[i][j] & mask)) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %lu,%lu\n", (unsigned long)i, (unsigned long)j); goto error; } } } /*---------------------------------------------------------------------- * Cleanup *---------------------------------------------------------------------- */ if(H5Tclose(datatype) < 0) goto error; if(H5Tclose(mem_datatype) < 0) goto error; if(H5Pclose(dc) < 0) goto error; if(H5Sclose(space) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_nbit_float * * Purpose: Tests the float datatype of nbit filter * * Return: Success: 0 * * Failure: -1 * * Programmer: Xiaowen Wu * Friday, Jan. 21th, 2005 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_nbit_float(hid_t file) { #ifdef H5_HAVE_FILTER_NBIT hid_t dataset, datatype, space, dc; const hsize_t size[2] = {2, 5}; const hsize_t chunk_size[2] = {2, 5}; /* orig_data[] are initialized to be within the range that can be represented by * dataset datatype (no precision loss during datatype conversion) */ float orig_data[2][5] = {{(float)188384.00, (float)19.103516, (float)-1.0831790e9, (float)-84.242188, (float)5.2045898}, {(float)-49140.000, (float)2350.2500, (float)-3.2110596e-1, (float)6.4998865e-5, (float)-0.0000000}}; float new_data[2][5]; size_t precision, offset; size_t i, j; #else /* H5_HAVE_FILTER_NBIT */ const char *not_supported= " Nbit is not enabled."; #endif /* H5_HAVE_FILTER_NBIT */ TESTING(" nbit float (setup)"); #ifdef H5_HAVE_FILTER_NBIT /* Define user-defined single-precision floating-point type for dataset */ datatype = H5Tcopy(H5T_IEEE_F32BE); if(H5Tset_fields(datatype, (size_t)26, (size_t)20, (size_t)6, (size_t)7, (size_t)13) < 0) goto error; offset = 7; if(H5Tset_offset(datatype,offset) < 0) goto error; precision = 20; if(H5Tset_precision(datatype,precision) < 0) goto error; if(H5Tset_size(datatype, (size_t)4) < 0) goto error; if(H5Tset_ebias(datatype, (size_t)31) < 0) goto error; /* Create the data space */ if((space = H5Screate_simple(2, size, NULL)) < 0) goto error; /* Use nbit filter */ if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk(dc, 2, chunk_size) < 0) goto error; if(H5Pset_nbit(dc) < 0) goto error; /* Create the dataset */ if((dataset = H5Dcreate2(file, DSET_NBIT_FLOAT_NAME, datatype, space, H5P_DEFAULT, dc, H5P_DEFAULT)) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 1: Test nbit by setting up a chunked dataset and writing * to it. *---------------------------------------------------------------------- */ TESTING(" nbit float (write)"); #ifdef H5_HAVE_FILTER_NBIT if(H5Dwrite(dataset, H5T_NATIVE_FLOAT, H5S_ALL, H5S_ALL, H5P_DEFAULT, orig_data) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 2: Try to read the data we just wrote. *---------------------------------------------------------------------- */ TESTING(" nbit float (read)"); #ifdef H5_HAVE_FILTER_NBIT /* Read the dataset back */ if(H5Dread(dataset, H5T_NATIVE_FLOAT, H5S_ALL, H5S_ALL, H5P_DEFAULT, new_data) < 0) goto error; /* Check that the values read are the same as the values written * Assume size of int = size of float */ for(i=0; i<(size_t)size[0]; i++) { for(j=0; j<(size_t)size[1]; j++) { if(!(orig_data[i][j]==orig_data[i][j])) continue; /* skip if value is NaN */ if(new_data[i][j] != orig_data[i][j]) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %lu,%lu\n", (unsigned long)i, (unsigned long)j); goto error; } } } /*---------------------------------------------------------------------- * Cleanup *---------------------------------------------------------------------- */ if(H5Tclose(datatype) < 0) goto error; if(H5Pclose(dc) < 0) goto error; if(H5Sclose(space) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_nbit_double * * Purpose: Tests the double datatype of nbit filter * * Return: Success: 0 * * Failure: -1 * * Programmer: Xiaowen Wu * Wednesday, Jan. 26th, 2005 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_nbit_double(hid_t file) { /* assume unsigned int and float has the same number of bytes */ #ifdef H5_HAVE_FILTER_NBIT hid_t dataset, datatype, space, dc; const hsize_t size[2] = {2, 5}; const hsize_t chunk_size[2] = {2, 5}; /* orig_data[] are initialized to be within the range that can be represented by * dataset datatype (no precision loss during datatype conversion) */ double orig_data[2][5] = {{1.6081706885101836e+60, -255.32099170994480, 1.2677579992621376e-61, 64568.289448797700, -1.0619721778839084e-75}, {2.1499497833454840e+56, 6.6562295504670740e-3, -1.5747263393432150, 1.0711093225222612, -9.8971679387636870e-1}}; double new_data[2][5]; size_t precision, offset; size_t i, j; #else /* H5_HAVE_FILTER_NBIT */ const char *not_supported= " Nbit is not enabled."; #endif /* H5_HAVE_FILTER_NBIT */ TESTING(" nbit double (setup)"); #ifdef H5_HAVE_FILTER_NBIT /* Define user-defined doule-precision floating-point type for dataset */ datatype = H5Tcopy(H5T_IEEE_F64BE); if(H5Tset_fields(datatype, (size_t)55, (size_t)46, (size_t)9, (size_t)5, (size_t)41) < 0) goto error; offset = 5; if(H5Tset_offset(datatype,offset) < 0) goto error; precision = 51; if(H5Tset_precision(datatype,precision) < 0) goto error; if(H5Tset_size(datatype, (size_t)8) < 0) goto error; if(H5Tset_ebias(datatype, (size_t)255) < 0) goto error; /* Create the data space */ if((space = H5Screate_simple(2, size, NULL)) < 0) goto error; /* Use nbit filter */ if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk(dc, 2, chunk_size) < 0) goto error; if(H5Pset_nbit(dc) < 0) goto error; /* Create the dataset */ if((dataset = H5Dcreate2(file, DSET_NBIT_DOUBLE_NAME, datatype, space, H5P_DEFAULT, dc, H5P_DEFAULT)) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 1: Test nbit by setting up a chunked dataset and writing * to it. *---------------------------------------------------------------------- */ TESTING(" nbit double (write)"); #ifdef H5_HAVE_FILTER_NBIT if(H5Dwrite(dataset, H5T_NATIVE_DOUBLE, H5S_ALL, H5S_ALL, H5P_DEFAULT, orig_data) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 2: Try to read the data we just wrote. *---------------------------------------------------------------------- */ TESTING(" nbit double (read)"); #ifdef H5_HAVE_FILTER_NBIT /* Read the dataset back */ if(H5Dread(dataset, H5T_NATIVE_DOUBLE, H5S_ALL, H5S_ALL, H5P_DEFAULT, new_data) < 0) goto error; /* Check that the values read are the same as the values written * Assume size of long long = size of double */ for(i=0; i<(size_t)size[0]; i++) { for(j=0; j<(size_t)size[1]; j++) { if(!(orig_data[i][j]==orig_data[i][j])) continue; /* skip if value is NaN */ if(new_data[i][j] != orig_data[i][j]) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %lu,%lu\n", (unsigned long)i, (unsigned long)j); goto error; } } } /*---------------------------------------------------------------------- * Cleanup *---------------------------------------------------------------------- */ if(H5Tclose(datatype) < 0) goto error; if(H5Pclose(dc) < 0) goto error; if(H5Sclose(space) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_nbit_array * * Purpose: Tests the simple version array datatype for nbit filter * * Return: Success: 0 * * Failure: -1 * * Programmer: Xiaowen Wu * Tuesday, Jan. 18th, 2005 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_nbit_array(hid_t file) { #ifdef H5_HAVE_FILTER_NBIT hid_t dataset, base_datatype, array_datatype, space, dc; hid_t mem_base_datatype, mem_array_datatype; const hsize_t size[2] = {2, 5}; const hsize_t adims[2] = {3, 2}; const hsize_t chunk_size[2] = {2,5}; unsigned int orig_data[2][5][3][2]; unsigned int new_data[2][5][3][2]; size_t precision, offset; size_t i, j, m, n; #else /* H5_HAVE_FILTER_NBIT */ const char *not_supported= " Nbit is not enabled."; #endif /* H5_HAVE_FILTER_NBIT */ TESTING(" nbit array (setup)"); #ifdef H5_HAVE_FILTER_NBIT /* Define dataset array datatype's base datatype and set precision, offset */ base_datatype = H5Tcopy(H5T_NATIVE_UINT); precision = 22; if(H5Tset_precision(base_datatype,precision) < 0) goto error; offset = 7; if(H5Tset_offset(base_datatype,offset) < 0) goto error; /* Copy to memory array datatype's base datatype before setting order */ mem_base_datatype = H5Tcopy(base_datatype); /* Set order of dataset array datatype's base datatype */ if(H5Tset_order(base_datatype, H5T_ORDER_BE) < 0) goto error; /* Create dataset array datatype */ array_datatype = H5Tarray_create2(base_datatype, 2, adims); /* Create memory array datatype */ mem_array_datatype = H5Tarray_create2(mem_base_datatype, 2, adims); /* Create the data space */ if((space = H5Screate_simple(2, size, NULL)) < 0) goto error; /* Use nbit filter */ if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk(dc, 2, chunk_size) < 0) goto error; if(H5Pset_nbit(dc) < 0) goto error; /* Create the dataset */ if((dataset = H5Dcreate2(file, DSET_NBIT_ARRAY_NAME, array_datatype, space, H5P_DEFAULT, dc, H5P_DEFAULT)) < 0) goto error; /* Initialize data, assuming size of long long >= size of unsigned int */ for(i= 0;i< (size_t)size[0]; i++) for(j = 0; j < (size_t)size[1]; j++) for(m = 0; m < (size_t)adims[0]; m++) for(n = 0; n < (size_t)adims[1]; n++) orig_data[i][j][m][n] = (unsigned int)(((long long)HDrandom() % (long long)HDpow(2.0, (double)precision)) << offset); PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 1: Test nbit by setting up a chunked dataset and writing * to it. *---------------------------------------------------------------------- */ TESTING(" nbit array (write)"); #ifdef H5_HAVE_FILTER_NBIT if(H5Dwrite(dataset, mem_array_datatype, H5S_ALL, H5S_ALL, H5P_DEFAULT, orig_data) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 2: Try to read the data we just wrote. *---------------------------------------------------------------------- */ TESTING(" nbit array (read)"); #ifdef H5_HAVE_FILTER_NBIT /* Read the dataset back */ if(H5Dread(dataset, mem_array_datatype, H5S_ALL, H5S_ALL, H5P_DEFAULT, new_data) < 0) goto error; /* Check that the values read are the same as the values written */ for(i=0; i<(size_t)size[0]; i++) for(j=0; j<(size_t)size[1]; j++) for(m = 0; m < (size_t)adims[0]; m++) for(n = 0; n < (size_t)adims[1]; n++) { if(new_data[i][j][m][n]!= orig_data[i][j][m][n]) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %lu,%lu,%lu,%lu\n", (unsigned long)i, (unsigned long)j, (unsigned long)m, (unsigned long)n); goto error; } } /*---------------------------------------------------------------------- * Cleanup *---------------------------------------------------------------------- */ if(H5Tclose(array_datatype) < 0) goto error; if(H5Tclose(base_datatype) < 0) goto error; if(H5Tclose(mem_array_datatype) < 0) goto error; if(H5Tclose(mem_base_datatype) < 0) goto error; if(H5Pclose(dc) < 0) goto error; if(H5Sclose(space) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_nbit_compound * * Purpose: Tests a simple version of compound datatype of nbit filter * * Return: Success: 0 * * Failure: -1 * * Programmer: Xiaowen Wu * Tuesday, Jan. 18th, 2005 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_nbit_compound(hid_t file) { #ifdef H5_HAVE_FILTER_NBIT typedef struct { /* Struct with atomic fields */ int i; char c; short s; float f; } atomic; hid_t i_tid, c_tid, s_tid, f_tid; hid_t cmpd_tid; /* atomic compound datatype */ hid_t mem_cmpd_tid; /* memory atomic compound datatype */ size_t precision[3] = {15, 7, 10}; size_t offset[3] = {9, 0, 3}; hid_t dataset, space, dc; const hsize_t size[2] = {2, 5}; const hsize_t chunk_size[2] = {2, 5}; const float float_val[2][5] = {{(float)188384.00, (float)19.103516, (float)-1.0831790e9, (float)-84.242188, (float)5.2045898}, {(float)-49140.000, (float)2350.2500, (float)-3.2110596e-1, (float)6.4998865e-5, (float)-0.0000000}}; atomic orig_data[2][5]; atomic new_data[2][5]; unsigned int i_mask, s_mask, c_mask; size_t i, j; #else /* H5_HAVE_FILTER_NBIT */ const char *not_supported= " Nbit is not enabled."; #endif /* H5_HAVE_FILTER_NBIT */ TESTING(" nbit compound (setup)"); #ifdef H5_HAVE_FILTER_NBIT /* Define datatypes of members of compound datatype */ i_tid=H5Tcopy(H5T_NATIVE_INT); c_tid=H5Tcopy(H5T_NATIVE_CHAR); s_tid=H5Tcopy(H5T_NATIVE_SHORT); f_tid=H5Tcopy(H5T_IEEE_F32BE); /* Set precision and offset etc. */ if(H5Tset_precision(i_tid,precision[0]) < 0) goto error; if(H5Tset_offset(i_tid,offset[0]) < 0) goto error; if(H5Tset_precision(c_tid,precision[1]) < 0) goto error; if(H5Tset_offset(c_tid,offset[1]) < 0) goto error; if(H5Tset_precision(s_tid,precision[2]) < 0) goto error; if(H5Tset_offset(s_tid,offset[2]) < 0) goto error; if(H5Tset_fields(f_tid, (size_t)26, (size_t)20, (size_t)6, (size_t)7, (size_t)13) < 0) goto error; if(H5Tset_offset(f_tid, (size_t)7) < 0) goto error; if(H5Tset_precision(f_tid, (size_t)20) < 0) goto error; if(H5Tset_size(f_tid, (size_t)4) < 0) goto error; if(H5Tset_ebias(f_tid, (size_t)31) < 0) goto error; /* Create a memory compound datatype before setting the order */ mem_cmpd_tid = H5Tcreate(H5T_COMPOUND, sizeof(atomic)); if(H5Tinsert(mem_cmpd_tid, "i", HOFFSET(atomic, i), i_tid) < 0) goto error; if(H5Tinsert(mem_cmpd_tid, "c", HOFFSET(atomic, c), c_tid) < 0) goto error; if(H5Tinsert(mem_cmpd_tid, "s", HOFFSET(atomic, s), s_tid) < 0) goto error; if(H5Tinsert(mem_cmpd_tid, "f", HOFFSET(atomic, f), H5T_NATIVE_FLOAT) < 0) goto error; /* Create a dataset compound datatype and insert some atomic types */ cmpd_tid = H5Tcreate(H5T_COMPOUND, sizeof(atomic)); if(H5Tinsert(cmpd_tid, "i", HOFFSET(atomic, i), i_tid) < 0) goto error; if(H5Tinsert(cmpd_tid, "c", HOFFSET(atomic, c), c_tid) < 0) goto error; if(H5Tinsert(cmpd_tid, "s", HOFFSET(atomic, s), s_tid) < 0) goto error; if(H5Tinsert(cmpd_tid, "f", HOFFSET(atomic, f), f_tid) < 0) goto error; /* Set order of dataset compound datatype */ if(H5Tset_order(cmpd_tid, H5T_ORDER_BE) < 0) goto error; /* Create the data space */ if((space = H5Screate_simple(2, size, NULL)) < 0) goto error; /* Use nbit filter */ if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk(dc, 2, chunk_size) < 0) goto error; if(H5Pset_nbit(dc) < 0) goto error; /* Create the dataset */ if((dataset = H5Dcreate2(file, DSET_NBIT_COMPOUND_NAME, cmpd_tid, space, H5P_DEFAULT, dc, H5P_DEFAULT)) < 0) goto error; /* Initialize data, assuming size of long long >= size of member datatypes */ for(i= 0;i< (size_t)size[0]; i++) for(j = 0; j < (size_t)size[1]; j++) { orig_data[i][j].i = (int)(((long long)HDrandom() % (long long)HDpow(2.0, (double)(precision[0]-1))) << offset[0]); orig_data[i][j].c = (char)(((long long)HDrandom() % (long long)HDpow(2.0, (double)(precision[1]-1))) << offset[1]); orig_data[i][j].s = (short)(((long long)HDrandom() % (long long)HDpow(2.0, (double)(precision[2]-1))) << offset[2]); orig_data[i][j].f = float_val[i][j]; /* some even-numbered integer values are negtive */ if((i*size[1]+j+1)%2 == 0) { orig_data[i][j].i = -orig_data[i][j].i; orig_data[i][j].s = (short)-orig_data[i][j].s; } } PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 1: Test nbit by setting up a chunked dataset and writing * to it. *---------------------------------------------------------------------- */ TESTING(" nbit compound (write)"); #ifdef H5_HAVE_FILTER_NBIT if(H5Dwrite(dataset, mem_cmpd_tid, H5S_ALL, H5S_ALL, H5P_DEFAULT, orig_data) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 2: Try to read the data we just wrote. *---------------------------------------------------------------------- */ TESTING(" nbit compound (read)"); #ifdef H5_HAVE_FILTER_NBIT /* Read the dataset back */ if(H5Dread(dataset, mem_cmpd_tid, H5S_ALL, H5S_ALL, H5P_DEFAULT, new_data) < 0) goto error; /* Check that the values read are the same as the values written * Use mask for checking the significant bits, ignoring the padding bits */ i_mask = ~((unsigned)~0 << (precision[0] + offset[0])) & ((unsigned)~0 << offset[0]); c_mask = ~((unsigned)~0 << (precision[1] + offset[1])) & ((unsigned)~0 << offset[1]); s_mask = ~((unsigned)~0 << (precision[2] + offset[2])) & ((unsigned)~0 << offset[2]); for(i=0; i= size of member datatypes */ for(i= 0;i< (size_t)size[0]; i++) for(j = 0; j < (size_t)size[1]; j++) { orig_data[i][j].a.i = (int)(((long long)HDrandom() % (long long)HDpow(2.0, (double)(precision[0]-1))) << offset[0]); orig_data[i][j].a.c = (char)(((long long)HDrandom() % (long long)HDpow(2.0, (double)(precision[1]-1))) << offset[1]); orig_data[i][j].a.s = (short)(-((long long)HDrandom() % (long long)HDpow(2.0, (double)(precision[2]-1))) << offset[2]); orig_data[i][j].a.f = float_val[i][j]; orig_data[i][j].v = (unsigned int)(((long long)HDrandom() % (long long)HDpow(2.0, (double)precision[3])) << offset[3]); for(m = 0; m < (size_t)array_dims[0]; m++) for(n = 0; n < (size_t)array_dims[1]; n++) orig_data[i][j].b[m][n] = (char)(((long long)HDrandom() % (long long)HDpow(2.0, (double)(precision[4]-1))) << offset[4]); for(m = 0; m < (size_t)array_dims[0]; m++) for(n = 0; n < (size_t)array_dims[1]; n++) { orig_data[i][j].d[m][n].i = (int)(-((long long)HDrandom() % (long long)HDpow(2.0, (double)(precision[0]-1))) << offset[0]); orig_data[i][j].d[m][n].c = (char)(((long long)HDrandom() % (long long)HDpow(2.0, (double)(precision[1]-1))) << offset[1]); orig_data[i][j].d[m][n].s = (short)(((long long)HDrandom() % (long long)HDpow(2.0, (double)(precision[2]-1))) << offset[2]); orig_data[i][j].d[m][n].f = float_val[i][j]; } } PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 1: Test nbit by setting up a chunked dataset and writing * to it. *---------------------------------------------------------------------- */ TESTING(" nbit compound complex (write)"); #ifdef H5_HAVE_FILTER_NBIT if(H5Dwrite(dataset, mem_cmpd_tid2, H5S_ALL, H5S_ALL, H5P_DEFAULT, orig_data) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 2: Try to read the data we just wrote. *---------------------------------------------------------------------- */ TESTING(" nbit compound complex (read)"); #ifdef H5_HAVE_FILTER_NBIT /* Read the dataset back */ if(H5Dread(dataset, mem_cmpd_tid2, H5S_ALL, H5S_ALL, H5P_DEFAULT, new_data) < 0) goto error; /* Check that the values read are the same as the values written * Use mask for checking the significant bits, ignoring the padding bits */ i_mask = ~((unsigned)~0 << (precision[0] + offset[0])) & ((unsigned)~0 << offset[0]); c_mask = ~((unsigned)~0 << (precision[1] + offset[1])) & ((unsigned)~0 << offset[1]); s_mask = ~((unsigned)~0 << (precision[2] + offset[2])) & ((unsigned)~0 << offset[2]); b_mask = ~((unsigned)~0 << (precision[4] + offset[4])) & ((unsigned)~0 << offset[4]); for(i=0; i<(size_t)size[0]; i++) { for(j=0; j<(size_t)size[1]; j++) { b_failed = 0; d_failed = 0; for(m = 0; m < (size_t)array_dims[0]; m++) for(n = 0; n < (size_t)array_dims[1]; n++) if((new_data[i][j].b[m][n]&b_mask)!=(orig_data[i][j].b[m][n]&b_mask)) { b_failed = 1; goto out; } for(m = 0; m < (size_t)array_dims[0]; m++) for(n = 0; n < (size_t)array_dims[1]; n++) if((new_data[i][j].d[m][n].i & i_mask)!=(orig_data[i][j].d[m][n].i & i_mask)|| (new_data[i][j].d[m][n].c & c_mask)!=(orig_data[i][j].d[m][n].c & c_mask)|| (new_data[i][j].d[m][n].s & s_mask)!=(orig_data[i][j].d[m][n].s & s_mask)|| (new_data[i][j].d[m][n].f==new_data[i][j].d[m][n].f && new_data[i][j].d[m][n].f != new_data[i][j].d[m][n].f)) { d_failed = 1; goto out; } out: if((new_data[i][j].a.i & i_mask)!=(orig_data[i][j].a.i & i_mask)|| (new_data[i][j].a.c & c_mask)!=(orig_data[i][j].a.c & c_mask)|| (new_data[i][j].a.s & s_mask)!=(orig_data[i][j].a.s & s_mask)|| (new_data[i][j].a.f==new_data[i][j].a.f && new_data[i][j].a.f != new_data[i][j].a.f)|| new_data[i][j].v != orig_data[i][j].v || b_failed || d_failed) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %lu,%lu\n", (unsigned long)i, (unsigned long)j); goto error; } } } /*---------------------------------------------------------------------- * Cleanup *---------------------------------------------------------------------- */ if(H5Tclose(i_tid) < 0) goto error; if(H5Tclose(c_tid) < 0) goto error; if(H5Tclose(s_tid) < 0) goto error; if(H5Tclose(f_tid) < 0) goto error; if(H5Tclose(v_tid) < 0) goto error; if(H5Tclose(cmpd_tid2) < 0) goto error; if(H5Tclose(cmpd_tid1) < 0) goto error; if(H5Tclose(mem_cmpd_tid2) < 0) goto error; if(H5Tclose(mem_cmpd_tid1) < 0) goto error; if(H5Tclose(array_tid) < 0) goto error; if(H5Tclose(base_tid) < 0) goto error; if(H5Tclose(array_cmplx_tid) < 0) goto error; if(H5Tclose(mem_array_cmplx_tid) < 0) goto error; if(H5Pclose(dc) < 0) goto error; if(H5Sclose(space) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_nbit_compound_3 * * Purpose: Tests no-op datatypes in compound datatype for nbit filter * * Return: Success: 0 * * Failure: -1 * * Programmer: Xiaowen Wu * Thursday, Mar. 31th, 2005 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_nbit_compound_3(hid_t file) { #ifdef H5_HAVE_FILTER_NBIT typedef struct { /* Struct with some no-op type fields */ int i; /* integer field, NOT a no-op type */ char str[30]; /* fixed-length string, no-op type */ char *vl_str; /* varible-length string, no-op type */ hvl_t v; /* VL datatype field, no-op type */ hobj_ref_t r; /* Object reference field, no-op type */ unsigned char o[5]; /* Opaque field, no-op type */ } atomic; hid_t i_tid, str_tid, vl_str_tid, v_tid, o_tid; hid_t cmpd_tid; /* atomic compound datatype */ hid_t dataset, space, dc, obj_ref_dataset = -1; const hsize_t size[1] = {5}; const hsize_t chunk_size[1] = {5}; atomic orig_data[5]; atomic new_data[5]; size_t i, k, j; #else /* H5_HAVE_FILTER_NBIT */ const char *not_supported= " Nbit is not enabled."; #endif /* H5_HAVE_FILTER_NBIT */ TESTING(" nbit compound with no-op type (setup)"); #ifdef H5_HAVE_FILTER_NBIT /* Define datatypes of members of compound datatype */ i_tid=H5Tcopy(H5T_NATIVE_INT); if(H5Tset_precision(i_tid, (size_t)17) < 0) goto error; str_tid=H5Tcopy(H5T_C_S1); if(H5Tset_size(str_tid, (size_t)30) < 0) goto error; vl_str_tid = H5Tcopy(H5T_C_S1); if(H5Tset_size(vl_str_tid,H5T_VARIABLE) < 0) goto error; if((v_tid = H5Tvlen_create(H5T_NATIVE_UINT)) < 0) goto error; if((o_tid = H5Tcreate(H5T_OPAQUE, (size_t)5)) < 0) goto error; if(H5Tset_tag(o_tid, "testing opaque field") < 0) goto error; /* Create a dataset compound datatype and insert some atomic types */ cmpd_tid = H5Tcreate(H5T_COMPOUND, sizeof(atomic)); if(H5Tinsert(cmpd_tid, "i", HOFFSET(atomic, i), i_tid) < 0) goto error; if(H5Tinsert(cmpd_tid, "str", HOFFSET(atomic, str), str_tid) < 0) goto error; if(H5Tinsert(cmpd_tid, "vl_str", HOFFSET(atomic, vl_str), vl_str_tid) < 0) goto error; if(H5Tinsert(cmpd_tid, "v", HOFFSET(atomic, v), v_tid) < 0) goto error; if(H5Tinsert(cmpd_tid, "r", HOFFSET(atomic, r), H5T_STD_REF_OBJ) < 0) goto error; if(H5Tinsert(cmpd_tid, "o", HOFFSET(atomic, o), o_tid) < 0) goto error; /* Create the data space */ if((space = H5Screate_simple(1, size, NULL)) < 0) goto error; /* Use nbit filter */ if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk(dc, 1, chunk_size) < 0) goto error; if(H5Pset_nbit(dc) < 0) goto error; /* Create the dataset */ if((dataset = H5Dcreate2(file, DSET_NBIT_COMPOUND_NAME_3, cmpd_tid, space, H5P_DEFAULT, dc, H5P_DEFAULT)) < 0) goto error; /* Create the dataset object reference points to */ if((obj_ref_dataset = H5Dcreate2(file, "nbit_obj_ref", H5T_NATIVE_INT, space, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) goto error; /* Initialize data */ for(i = 0; i < (size_t)size[0]; i++) { orig_data[i].i = HDrandom() % (long)HDpow(2.0, 17.0 - 1.0); HDstrcpy(orig_data[i].str, "fixed-length C string"); orig_data[i].vl_str = HDstrdup("variable-length C string"); orig_data[i].v.p = HDmalloc((size_t)(i+1)*sizeof(unsigned int)); orig_data[i].v.len = (size_t)i+1; for(k = 0; k < (i+1); k++) ((unsigned int *)orig_data[i].v.p)[k] = (unsigned int)(i*100 + k); /* Create reference to the dataset "nbit_obj_ref" */ if(H5Rcreate(&orig_data[i].r, file, "nbit_obj_ref", H5R_OBJECT, -1) < 0) goto error; for(j = 0; j < 5; j++) orig_data[i].o[j] = (unsigned char)(i + j); } PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 1: Test nbit by setting up a chunked dataset and writing * to it. *---------------------------------------------------------------------- */ TESTING(" nbit compound with no-op type (write)"); #ifdef H5_HAVE_FILTER_NBIT if(H5Dwrite(dataset, cmpd_tid, H5S_ALL, H5S_ALL, H5P_DEFAULT, orig_data) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 2: Try to read the data we just wrote. *---------------------------------------------------------------------- */ TESTING(" nbit compound with no-op type (read)"); #ifdef H5_HAVE_FILTER_NBIT /* Read the dataset back */ if(H5Dread(dataset, cmpd_tid, H5S_ALL, H5S_ALL, H5P_DEFAULT, new_data) < 0) goto error; /* Check that the values read are the same as the values written */ for(i = 0; i < (size_t)size[0]; i++) { if(new_data[i].i != orig_data[i].i || strcmp(new_data[i].str, orig_data[i].str) !=0 || strcmp(new_data[i].vl_str, orig_data[i].vl_str) !=0 || new_data[i].v.len != orig_data[i].v.len || new_data[i].r != orig_data[i].r) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %lu\n", (unsigned long)i); goto error; } for(k=0; k HDpow(10.0, -3.0)) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %lu,%lu\n", (unsigned long)i, (unsigned long)j); goto error; } } } /*---------------------------------------------------------------------- * Cleanup *---------------------------------------------------------------------- */ if(H5Tclose(datatype) < 0) goto error; if(H5Pclose(dc) < 0) goto error; if(H5Sclose(space) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_scaleoffset_float_2 * * Purpose: Tests the float datatype for scaleoffset filter, with fill * value set, using variable-minimum-bits method * * Return: Success: 0 * * Failure: -1 * * Programmer: Xiaowen Wu * Wednesday, Apr. 20th, 2005 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_scaleoffset_float_2(hid_t file) { #ifdef H5_HAVE_FILTER_SCALEOFFSET hid_t dataset, datatype, space, mspace, dc; const hsize_t size[2] = {2, 5}; const hsize_t chunk_size[2] = {2,5}; float orig_data[2][5]; float new_data[2][5]; float fillval; hsize_t start[2]; /* Start of hyperslab */ hsize_t stride[2]; /* Stride of hyperslab */ hsize_t count[2]; /* Block count */ hsize_t block[2]; /* Block sizes */ size_t j; #else /* H5_HAVE_FILTER_SCALEOFFSET */ const char *not_supported= " Scaleoffset is not enabled."; #endif /* H5_HAVE_FILTER_SCALEOFFSET */ TESTING(" scaleoffset float with fill value, D-scaling (setup)"); #ifdef H5_HAVE_FILTER_SCALEOFFSET datatype = H5Tcopy(H5T_NATIVE_FLOAT); /* Set order of dataset datatype */ if(H5Tset_order(datatype, H5T_ORDER_BE) < 0) goto error; /* Create the data space for the dataset */ if((space = H5Screate_simple(2, size, NULL)) < 0) goto error; /* Create the dataset property list */ if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; /* Set fill value */ fillval = 10000.0; if(H5Pset_fill_value(dc, H5T_NATIVE_FLOAT, &fillval) < 0) goto error; /* Set up to use scaleoffset filter, decimal scale factor is 3, * use variable-minimum-bits method */ if(H5Pset_chunk(dc, 2, chunk_size) < 0) goto error; if(H5Pset_scaleoffset(dc, H5Z_SO_FLOAT_DSCALE,3) < 0) goto error; /* Create the dataset */ if((dataset = H5Dcreate2(file, DSET_SCALEOFFSET_FLOAT_NAME_2, datatype, space, H5P_DEFAULT, dc, H5P_DEFAULT)) < 0) goto error; /* Create the memory data space */ if((mspace = H5Screate_simple(2, size, NULL)) < 0) goto error; /* Select hyperslab for data to write, using 1x5 blocks, * (1,1) stride and (1,1) count starting at the position (0,0). */ start[0] = 0; start[1] = 0; stride[0] = 1; stride[1] = 1; count[0] = 1; count[1] = 1; block[0] = 1; block[1] = 5; if(H5Sselect_hyperslab(mspace, H5S_SELECT_SET, start, stride, count, block) < 0) goto error; /* Initialize data of hyperslab */ for(j = 0; j < (size_t)size[1]; j++) { orig_data[0][j] = (float)((HDrandom() % 100000) / (float)1000.0); /* even-numbered values are negtive */ if((j+1)%2 == 0) orig_data[0][j] = -orig_data[0][j]; } PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 1: Test scaleoffset by setting up a chunked dataset and writing * to it. *---------------------------------------------------------------------- */ TESTING(" scaleoffset float with fill value, D-scaling (write)"); #ifdef H5_HAVE_FILTER_SCALEOFFSET /* only data in the hyperslab will be written, other value should be fill value */ if(H5Dwrite(dataset, H5T_NATIVE_FLOAT, mspace, mspace, H5P_DEFAULT, orig_data) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 2: Try to read the data we just wrote. *---------------------------------------------------------------------- */ TESTING(" scaleoffset float with fill value, D-scaling (read)"); #ifdef H5_HAVE_FILTER_SCALEOFFSET /* Read the dataset back */ if(H5Dread(dataset, H5T_NATIVE_FLOAT, mspace, mspace, H5P_DEFAULT, new_data) < 0) goto error; /* Check that the values read are the same as the values written */ for(j=0; j<(size_t)size[1]; j++) { if(HDfabs(new_data[0][j]-orig_data[0][j]) > HDpow(10.0, -3.0)) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %lu,%lu\n", (unsigned long)0, (unsigned long)j); goto error; } } /*---------------------------------------------------------------------- * Cleanup *---------------------------------------------------------------------- */ if(H5Tclose(datatype) < 0) goto error; if(H5Pclose(dc) < 0) goto error; if(H5Sclose(space) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_scaleoffset_double * * Purpose: Tests the double datatype for scaleoffset filter, with fill * value undefined, using variable-minimum-bits method * * Return: Success: 0 * * Failure: -1 * * Programmer: Xiaowen Wu * Monday, Apr. 25th, 2005 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_scaleoffset_double(hid_t file) { #ifdef H5_HAVE_FILTER_SCALEOFFSET hid_t dataset, datatype, space, dc; const hsize_t size[2] = {2, 5}; const hsize_t chunk_size[2] = {2,5}; double orig_data[2][5]; double new_data[2][5]; size_t i, j; #else /* H5_HAVE_FILTER_SCALEOFFSET */ const char *not_supported= " Scaleoffset is not enabled."; #endif /* H5_HAVE_FILTER_SCALEOFFSET */ TESTING(" scaleoffset double without fill value, D-scaling (setup)"); #ifdef H5_HAVE_FILTER_SCALEOFFSET datatype = H5Tcopy(H5T_NATIVE_DOUBLE); /* Set order of dataset datatype */ if(H5Tset_order(datatype, H5T_ORDER_BE) < 0) goto error; /* Create the data space */ if((space = H5Screate_simple(2, size, NULL)) < 0) goto error; /* Create the dataset property list */ if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; /* Fill value undefined */ if(H5Pset_fill_value(dc, datatype, NULL) < 0) goto error; /* Set up to use scaleoffset filter, decimal scale factor is 7, * use variable-minimum-bits method */ if(H5Pset_chunk(dc, 2, chunk_size) < 0) goto error; if(H5Pset_scaleoffset(dc, H5Z_SO_FLOAT_DSCALE,7) < 0) goto error; /* Create the dataset */ if((dataset = H5Dcreate2(file, DSET_SCALEOFFSET_DOUBLE_NAME, datatype, space, H5P_DEFAULT, dc, H5P_DEFAULT)) < 0) goto error; /* Initialize data */ for(i= 0;i< (size_t)size[0]; i++) for(j = 0; j < (size_t)size[1]; j++) { orig_data[i][j] = (HDrandom() % 10000000) / 10000000.0; /* even-numbered values are negtive */ if((i*size[1]+j+1)%2 == 0) orig_data[i][j] = -orig_data[i][j]; } PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 1: Test scaleoffset by setting up a chunked dataset and writing * to it. *---------------------------------------------------------------------- */ TESTING(" scaleoffset double without fill value, D-scaling (write)"); #ifdef H5_HAVE_FILTER_SCALEOFFSET if(H5Dwrite(dataset, H5T_NATIVE_DOUBLE, H5S_ALL, H5S_ALL, H5P_DEFAULT, orig_data) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 2: Try to read the data we just wrote. *---------------------------------------------------------------------- */ TESTING(" scaleoffset double without fill value, D-scaling (read)"); #ifdef H5_HAVE_FILTER_SCALEOFFSET /* Read the dataset back */ if(H5Dread(dataset, H5T_NATIVE_DOUBLE, H5S_ALL, H5S_ALL, H5P_DEFAULT, new_data) < 0) goto error; /* Check that the values read are the same as the values written */ for(i=0; i<(size_t)size[0]; i++) { for(j=0; j<(size_t)size[1]; j++) { if(HDfabs(new_data[i][j]-orig_data[i][j]) > HDpow(10.0, -7.0)) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %lu,%lu\n", (unsigned long)i, (unsigned long)j); goto error; } } } /*---------------------------------------------------------------------- * Cleanup *---------------------------------------------------------------------- */ if(H5Tclose(datatype) < 0) goto error; if(H5Pclose(dc) < 0) goto error; if(H5Sclose(space) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_scaleoffset_double_2 * * Purpose: Tests the double datatype for scaleoffset filter, with fill * value set, using variable-minimum-bits method * * Return: Success: 0 * * Failure: -1 * * Programmer: Xiaowen Wu * Monday, Apr. 25th, 2005 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_scaleoffset_double_2(hid_t file) { #ifdef H5_HAVE_FILTER_SCALEOFFSET hid_t dataset, datatype, space, mspace, dc; const hsize_t size[2] = {2, 5}; const hsize_t chunk_size[2] = {2,5}; double orig_data[2][5]; double new_data[2][5]; double fillval; hsize_t start[2]; /* Start of hyperslab */ hsize_t stride[2]; /* Stride of hyperslab */ hsize_t count[2]; /* Block count */ hsize_t block[2]; /* Block sizes */ size_t j; #else /* H5_HAVE_FILTER_SCALEOFFSET */ const char *not_supported= " Scaleoffset is not enabled."; #endif /* H5_HAVE_FILTER_SCALEOFFSET */ TESTING(" scaleoffset double with fill value, D-scaling (setup)"); #ifdef H5_HAVE_FILTER_SCALEOFFSET datatype = H5Tcopy(H5T_NATIVE_DOUBLE); /* Set order of dataset datatype */ if(H5Tset_order(datatype, H5T_ORDER_BE) < 0) goto error; /* Create the data space for the dataset */ if((space = H5Screate_simple(2, size, NULL)) < 0) goto error; /* Create the dataset property list */ if((dc = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; /* Set fill value */ fillval = 10000.0; if(H5Pset_fill_value(dc, H5T_NATIVE_DOUBLE, &fillval) < 0) goto error; /* Set up to use scaleoffset filter, decimal scale factor is 7, * use variable-minimum-bits method */ if(H5Pset_chunk(dc, 2, chunk_size) < 0) goto error; if(H5Pset_scaleoffset(dc, H5Z_SO_FLOAT_DSCALE,7) < 0) goto error; /* Create the dataset */ if((dataset = H5Dcreate2(file, DSET_SCALEOFFSET_DOUBLE_NAME_2, datatype, space, H5P_DEFAULT, dc, H5P_DEFAULT)) < 0) goto error; /* Create the memory data space */ if((mspace = H5Screate_simple(2, size, NULL)) < 0) goto error; /* Select hyperslab for data to write, using 1x5 blocks, * (1,1) stride and (1,1) count starting at the position (0,0). */ start[0] = 0; start[1] = 0; stride[0] = 1; stride[1] = 1; count[0] = 1; count[1] = 1; block[0] = 1; block[1] = 5; if(H5Sselect_hyperslab(mspace, H5S_SELECT_SET, start, stride, count, block) < 0) goto error; /* Initialize data of hyperslab */ for(j = 0; j < (size_t)size[1]; j++) { orig_data[0][j] = (HDrandom() % 10000000) / 10000000.0; /* even-numbered values are negtive */ if((j+1)%2 == 0) orig_data[0][j] = -orig_data[0][j]; } PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 1: Test scaleoffset by setting up a chunked dataset and writing * to it. *---------------------------------------------------------------------- */ TESTING(" scaleoffset double with fill value, D-scaling (write)"); #ifdef H5_HAVE_FILTER_SCALEOFFSET /* only data in the hyperslab will be written, other value should be fill value */ if(H5Dwrite(dataset, H5T_NATIVE_DOUBLE, mspace, mspace, H5P_DEFAULT, orig_data) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif /*---------------------------------------------------------------------- * STEP 2: Try to read the data we just wrote. *---------------------------------------------------------------------- */ TESTING(" scaleoffset double with fill value, D-scaling (read)"); #ifdef H5_HAVE_FILTER_SCALEOFFSET /* Read the dataset back */ if(H5Dread(dataset, H5T_NATIVE_DOUBLE, mspace, mspace, H5P_DEFAULT, new_data) < 0) goto error; /* Check that the values read are the same as the values written */ for(j=0; j<(size_t)size[1]; j++) { if(HDfabs(new_data[0][j]-orig_data[0][j]) > HDpow(10.0, -7.0)) { H5_FAILED(); printf(" Read different values than written.\n"); printf(" At index %lu,%lu\n", (unsigned long)0, (unsigned long)j); goto error; } } /*---------------------------------------------------------------------- * Cleanup *---------------------------------------------------------------------- */ if(H5Tclose(datatype) < 0) goto error; if(H5Pclose(dc) < 0) goto error; if(H5Sclose(space) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; PASSED(); #else SKIPPED(); puts(not_supported); #endif return 0; error: return -1; } /*------------------------------------------------------------------------- * Function: test_multiopen * * Purpose: Tests that a bug no longer exists. If a dataset is opened * twice and one of the handles is used to extend the dataset, * then the other handle should return the new size when * queried. * * Return: Success: 0 * * Failure: -1 * * Programmer: Robb Matzke * Tuesday, June 9, 1998 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_multiopen (hid_t file) { hid_t dcpl = -1, space = -1, dset1 = -1, dset2 = -1; hsize_t cur_size[1] = {10}; static hsize_t max_size[1] = {H5S_UNLIMITED}; hsize_t tmp_size[1]; TESTING("multi-open with extending"); /* Create the dataset and open it twice */ if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk(dcpl, 1, cur_size) < 0) goto error; if((space = H5Screate_simple(1, cur_size, max_size)) < 0) goto error; if((dset1 = H5Dcreate2(file, "multiopen", H5T_NATIVE_INT, space, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) goto error; if((dset2 = H5Dopen2(dset1, ".", H5P_DEFAULT)) < 0) goto error; if(H5Sclose(space) < 0) goto error; /* Extend with the first handle */ cur_size[0] = 20; if(H5Dset_extent(dset1, cur_size) < 0) goto error; /* Get the size from the second handle */ if((space = H5Dget_space(dset2)) < 0) goto error; if(H5Sget_simple_extent_dims(space, tmp_size, NULL) < 0) goto error; if(cur_size[0] != tmp_size[0]) { H5_FAILED(); printf(" Got %d instead of %d!\n", (int)tmp_size[0], (int)cur_size[0]); goto error; } /* end if */ if(H5Dclose(dset1) < 0) goto error; if(H5Dclose(dset2) < 0) goto error; if(H5Sclose(space) < 0) goto error; if(H5Pclose(dcpl) < 0) goto error; PASSED(); return 0; error: H5E_BEGIN_TRY { H5Dclose(dset1); H5Dclose(dset2); H5Sclose(space); H5Pclose(dcpl); } H5E_END_TRY; return -1; } /*------------------------------------------------------------------------- * Function: test_types * * Purpose: Make some datasets with various types so we can test h5ls. * * Return: Success: 0 * * Failure: -1 * * Programmer: Robb Matzke * Monday, June 7, 1999 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_types(hid_t file) { hid_t grp=-1, type=-1, space=-1, dset=-1; size_t i; hsize_t nelmts; unsigned char buf[32]; TESTING("various datatypes"); if((grp = H5Gcreate2(file, "typetests", H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) goto error; /* bitfield_1 */ nelmts = sizeof(buf); if((type=H5Tcopy(H5T_STD_B8LE)) < 0 || (space=H5Screate_simple(1, &nelmts, NULL)) < 0 || (dset=H5Dcreate2(grp, "bitfield_1", type, space, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) goto error; for(i=0; i=0) { H5_FAILED(); printf(" Line %d: Shouldn't have created dataset!\n",__LINE__); H5Dclose(dsid); goto error; } /* end if */ /* (Should fail because the 'can apply' function should fail) */ H5E_BEGIN_TRY { dsid = H5Dcreate2(file, DSET_CAN_APPLY_NAME, H5T_NATIVE_FLOAT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT); } H5E_END_TRY; if(dsid >=0) { H5_FAILED(); printf(" Line %d: Shouldn't have created dataset!\n",__LINE__); H5Dclose(dsid); goto error; } /* end if */ /* Create new dataset */ if((dsid = H5Dcreate2(file, DSET_CAN_APPLY_NAME, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) { H5_FAILED(); printf(" Line %d: Can't create dataset\n",__LINE__); goto error; } /* end if */ /* Write data */ if(H5Dwrite(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, points) < 0) { H5_FAILED(); printf(" Line %d: Error writing dataset data\n",__LINE__); goto error; } /* end if */ /* Flush the file (to clear the cache) */ if(H5Fflush(file, H5F_SCOPE_GLOBAL) < 0) { H5_FAILED(); printf(" Line %d: Error flushing file\n",__LINE__); goto error; } /* end if */ /* Query the dataset's size on disk */ if((dset_size=H5Dget_storage_size(dsid))==0) { H5_FAILED(); printf(" Line %d: Error querying dataset size\n",__LINE__); goto error; } /* end if */ /* Verify that the size indicates data is uncompressed */ if((H5Tget_size(H5T_NATIVE_INT)*dims[0]*dims[1])!=dset_size) { H5_FAILED(); printf(" Line %d: Incorrect dataset size: %lu\n",__LINE__,(unsigned long)dset_size); goto error; } /* end if */ /* Read data */ if(H5Dread(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, check) < 0) { H5_FAILED(); printf(" Line %d: Error reading dataset data\n",__LINE__); goto error; } /* end if */ /* Compare data */ /* Check that the values read are the same as the values written */ for(i=0; i<(size_t)dims[0]; i++) { for(j=0; j<(size_t)dims[1]; j++) { if(points[i][j] != check[i][j]) { H5_FAILED(); printf(" Line %d: Read different values than written.\n",__LINE__); printf(" At index %lu,%lu\n", (unsigned long)(i), (unsigned long)(j)); printf(" At original: %d\n",points[i][j]); printf(" At returned: %d\n",check[i][j]); goto error; } /* end if */ } /* end for */ } /* end for */ /* Close dataset */ if(H5Dclose(dsid) < 0) { H5_FAILED(); printf(" Line %d: Can't close dataset\n",__LINE__); goto error; } /* end if */ /* Close dataspace */ if(H5Sclose(sid) < 0) { H5_FAILED(); printf(" Line %d: Can't close dataspace\n",__LINE__); goto error; } /* end if */ /* Close dataset creation property list */ if(H5Pclose(dcpl) < 0) { H5_FAILED(); printf(" Line %d: Can't close dcpl\n",__LINE__); goto error; } /* end if */ PASSED(); return 0; error: return -1; } /* end test_can_apply() */ /* This message derives from H5Z */ const H5Z_class2_t H5Z_CAN_APPLY_TEST2[1] = {{ H5Z_CLASS_T_VERS, H5Z_FILTER_CAN_APPLY_TEST2, /* Filter id number */ 1, 1, "can_apply_test", /* Filter name for debugging */ can_apply_bogus, /* The "can apply" callback */ NULL, /* The "set local" callback */ filter_bogus3, /* The actual filter function */ }}; /*------------------------------------------------------------------------- * Function: test_can_apply2 * * Purpose: Tests library behavior when an optional filter indicates * it can't apply to certain combinations of creation * parameters. The filter function FILTER_BOGUS3 does nothing * than returning a failure. Because the filter is optional, * the library skips the filter even though the CAN_APPLY_BOGUS * indicates the datatype DOUBLE can't apply to the dataset. * * Return: Success: 0 * Failure: -1 * * Programmer: Raymond Lu * 4 August 2010 * *------------------------------------------------------------------------- */ static herr_t test_can_apply2(hid_t file) { hid_t dsid; /* Dataset ID */ hid_t sid; /* Dataspace ID */ hid_t dcpl; /* Dataspace creation property list ID */ const hsize_t dims[2] = {DSET_DIM1, DSET_DIM2}; /* Dataspace dimensions */ const hsize_t chunk_dims[2] = {2, 25}; /* Chunk dimensions */ hsize_t dset_size; /* Dataset size */ size_t i,j; /* Local index variables */ TESTING("dataset filter 'can apply' callback second"); /* Create dcpl with special filter */ if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) { H5_FAILED(); printf(" Line %d: Can't create dcpl\n",__LINE__); goto error; } /* end if */ if(H5Pset_chunk(dcpl, 2, chunk_dims) < 0) { H5_FAILED(); printf(" Line %d: Can't set chunk sizes\n",__LINE__); goto error; } /* end if */ if(H5Zregister (H5Z_CAN_APPLY_TEST2) < 0) { H5_FAILED(); printf(" Line %d: Can't register 'can apply' filter\n",__LINE__); goto error; } /* The filter is optional. */ if(H5Pset_filter(dcpl, H5Z_FILTER_CAN_APPLY_TEST2, H5Z_FLAG_OPTIONAL, (size_t)0, NULL) < 0) { H5_FAILED(); printf(" Line %d: Can't set bogus filter\n",__LINE__); goto error; } /* Create the data space */ if((sid = H5Screate_simple(2, dims, NULL)) < 0) { H5_FAILED(); printf(" Line %d: Can't open dataspace\n",__LINE__); goto error; } /* end if */ /* Create new dataset */ if((dsid = H5Dcreate2(file, DSET_CAN_APPLY_NAME2, H5T_NATIVE_DOUBLE, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) { H5_FAILED(); printf(" Line %d: Can't create dataset\n",__LINE__); goto error; } /* end if */ /* Write data */ if(H5Dwrite(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, points) < 0) { H5_FAILED(); printf(" Line %d: Error writing dataset data\n",__LINE__); goto error; } /* end if */ /* Flush the file (to clear the cache) */ if(H5Fflush(file, H5F_SCOPE_GLOBAL) < 0) { H5_FAILED(); printf(" Line %d: Error flushing file\n",__LINE__); goto error; } /* end if */ /* Query the dataset's size on disk */ if((dset_size=H5Dget_storage_size(dsid))==0) { H5_FAILED(); printf(" Line %d: Error querying dataset size\n",__LINE__); goto error; } /* end if */ /* Verify that the size indicates data is uncompressed */ if((H5Tget_size(H5T_NATIVE_DOUBLE)*dims[0]*dims[1])!=dset_size) { H5_FAILED(); printf(" Line %d: Incorrect dataset size: %lu\n",__LINE__,(unsigned long)dset_size); goto error; } /* end if */ /* Read data */ if(H5Dread(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, check) < 0) { H5_FAILED(); printf(" Line %d: Error reading dataset data\n",__LINE__); goto error; } /* end if */ /* Compare data */ /* Check that the values read are the same as the values written */ for(i=0; i<(size_t)dims[0]; i++) { for(j=0; j<(size_t)dims[1]; j++) { if(points[i][j] != check[i][j]) { H5_FAILED(); printf(" Line %d: Read different values than written.\n",__LINE__); printf(" At index %lu,%lu\n", (unsigned long)(i), (unsigned long)(j)); printf(" At original: %d\n",points[i][j]); printf(" At returned: %d\n",check[i][j]); goto error; } /* end if */ } /* end for */ } /* end for */ /* Close dataset */ if(H5Dclose(dsid) < 0) { H5_FAILED(); printf(" Line %d: Can't close dataset\n",__LINE__); goto error; } /* end if */ /* Close dataspace */ if(H5Sclose(sid) < 0) { H5_FAILED(); printf(" Line %d: Can't close dataspace\n",__LINE__); goto error; } /* end if */ /* Close dataset creation property list */ if(H5Pclose(dcpl) < 0) { H5_FAILED(); printf(" Line %d: Can't close dcpl\n",__LINE__); goto error; } /* end if */ PASSED(); return 0; error: return -1; } /* end test_can_apply2() */ /*------------------------------------------------------------------------- * Function: test_can_apply_szip * * Purpose: Tests library behavior when szip filter indicates it can't * apply to certain combinations of creation parameters * * Return: Success: 0 * Failure: -1 * * Programmer: Quincey Koziol * Monday, April 7, 2003 * *------------------------------------------------------------------------- */ static herr_t test_can_apply_szip(hid_t #ifndef H5_HAVE_FILTER_SZIP UNUSED #endif /* H5_HAVE_FILTER_SZIP */ file) { #ifdef H5_HAVE_FILTER_SZIP hid_t dsid; /* Dataset ID */ hid_t sid; /* Dataspace ID */ hid_t dcpl; /* Dataspace creation property list ID */ unsigned szip_options_mask=H5_SZIP_NN_OPTION_MASK; unsigned szip_pixels_per_block; const hsize_t dims[2] = {500, 4096}; /* Dataspace dimensions */ const hsize_t dims2[2] = {4, 2}; /* Dataspace dimensions */ const hsize_t chunk_dims[2] = {250, 2048}; /* Chunk dimensions */ const hsize_t chunk_dims2[2] = {2, 1}; /* Chunk dimensions */ herr_t ret; /* Status value */ #endif /* H5_HAVE_FILTER_SZIP */ TESTING("dataset szip filter 'can apply' callback"); #ifdef H5_HAVE_FILTER_SZIP if(h5_szip_can_encode() == 1) { /* Create the data space */ if((sid = H5Screate_simple(2, dims, NULL)) < 0) { H5_FAILED(); printf(" Line %d: Can't open dataspace\n",__LINE__); goto error; } /* end if */ /* Create dcpl with special filter */ if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) { H5_FAILED(); printf(" Line %d: Can't create dcpl\n",__LINE__); goto error; } /* end if */ if(H5Pset_chunk(dcpl, 2, chunk_dims) < 0) { H5_FAILED(); printf(" Line %d: Can't set chunk sizes\n",__LINE__); goto error; } /* end if */ /* Set (invalid at property set time) szip parameters */ szip_pixels_per_block=3; H5E_BEGIN_TRY { ret=H5Pset_szip (dcpl, szip_options_mask, szip_pixels_per_block); } H5E_END_TRY; if(ret>=0) { H5_FAILED(); printf(" Line %d: Shouldn't be able to set szip filter\n",__LINE__); goto error; } /* Set (invalid at property set time) szip parameters */ szip_pixels_per_block=512; H5E_BEGIN_TRY { ret=H5Pset_szip (dcpl, szip_options_mask, szip_pixels_per_block); } H5E_END_TRY; if(ret>=0) { H5_FAILED(); printf(" Line %d: Shouldn't be able to set szip filter\n",__LINE__); goto error; } /* Set (invalid at dataset creation time) szip parameters */ szip_pixels_per_block=2; if(H5Pset_szip (dcpl, szip_options_mask, szip_pixels_per_block) < 0) { H5_FAILED(); printf(" Line %d: Can't set szip filter\n",__LINE__); goto error; } /* Create new dataset */ /* (Should succeed; according to the new algorithm, scanline should be reset to 2*128 satisfying 'maximum blocks per scanline' condition) */ H5E_BEGIN_TRY { dsid = H5Dcreate2(file, DSET_CAN_APPLY_SZIP_NAME, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT); } H5E_END_TRY; if(dsid <=0) { H5_FAILED(); printf(" Line %d: Should have created dataset!\n",__LINE__); goto error; } /* end if */ /* Close dataset */ if(H5Dclose(dsid) < 0) { H5_FAILED(); printf(" Line %d: Can't close dataset\n",__LINE__); goto error; } /* end if */ /* Close dataspace */ if(H5Sclose(sid) < 0) { H5_FAILED(); printf(" Line %d: Can't close dataspace\n",__LINE__); goto error; } /* end if */ /* Close dataset creation property list */ if(H5Pclose(dcpl) < 0) { H5_FAILED(); printf(" Line %d: Can't close dcpl\n",__LINE__); goto error; } /* end if */ /* Create another data space */ if((sid = H5Screate_simple(2, dims2, NULL)) < 0) { H5_FAILED(); printf(" Line %d: Can't open dataspace\n",__LINE__); goto error; } /* end if */ /* Create dcpl with special filter */ if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) { H5_FAILED(); printf(" Line %d: Can't create dcpl\n",__LINE__); goto error; } /* end if */ if(H5Pset_chunk(dcpl, 2, chunk_dims2) < 0) { H5_FAILED(); printf(" Line %d: Can't set chunk sizes\n",__LINE__); goto error; } /* end if */ /* Set (invalid at dataset creation time) szip parameters */ szip_pixels_per_block=32; if(H5Pset_szip (dcpl, szip_options_mask, szip_pixels_per_block) < 0) { H5_FAILED(); printf(" Line %d: Can't set szip filter\n",__LINE__); goto error; } /* Create new dataset */ /* (Should fail because the 'can apply' filter should indicate inappropriate combination) */ H5E_BEGIN_TRY { dsid = H5Dcreate2(file, DSET_CAN_APPLY_SZIP_NAME, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT); } H5E_END_TRY; if(dsid >=0) { H5_FAILED(); printf(" Line %d: Shouldn't have created dataset!\n",__LINE__); H5Dclose(dsid); goto error; } /* end if */ /* Close dataspace */ if(H5Sclose(sid) < 0) { H5_FAILED(); printf(" Line %d: Can't close dataspace\n",__LINE__); goto error; } /* end if */ /* Close dataset creation property list */ if(H5Pclose(dcpl) < 0) { H5_FAILED(); printf(" Line %d: Can't close dcpl\n",__LINE__); goto error; } /* end if */ PASSED(); } else { SKIPPED(); puts(" Szip encoding is not enabled."); } #else /* H5_HAVE_FILTER_SZIP */ SKIPPED(); puts(" Szip filter is not enabled."); #endif /* H5_HAVE_FILTER_SZIP */ return 0; #ifdef H5_HAVE_FILTER_SZIP error: return -1; #endif /* H5_HAVE_FILTER_SZIP */ } /* end test_can_apply_szip() */ /* This message derives from H5Z */ const H5Z_class2_t H5Z_SET_LOCAL_TEST[1] = {{ H5Z_CLASS_T_VERS, H5Z_FILTER_SET_LOCAL_TEST, /* Filter id number */ 1, 1, "set_local_test", /* Filter name for debugging */ NULL, /* The "can apply" callback */ set_local_bogus2, /* The "set local" callback */ filter_bogus2, /* The actual filter function */ }}; /*------------------------------------------------------------------------- * Function: test_set_local * * Purpose: Tests library behavior for "set local" filter callback * * Return: Success: 0 * Failure: -1 * * Programmer: Quincey Koziol * Monday, April 7, 2003 * *------------------------------------------------------------------------- */ static herr_t test_set_local(hid_t fapl) { char filename[FILENAME_BUF_SIZE]; hid_t file; /* File ID */ hid_t dsid; /* Dataset ID */ hid_t sid; /* Dataspace ID */ hid_t dcpl; /* Dataspace creation property list ID */ const hsize_t dims[2] = {DSET_DIM1, DSET_DIM2}; /* Dataspace dimensions */ const hsize_t chunk_dims[2] = {2, 25}; /* Chunk dimensions */ hsize_t dset_size; /* Dataset size */ unsigned cd_values[2]={BOGUS2_PARAM_1, BOGUS2_PARAM_2}; /* Parameters for Bogus2 filter */ size_t i,j; /* Local index variables */ double n; /* Local index variables */ TESTING("dataset filter 'set local' callback"); h5_fixname(FILENAME[5], fapl, filename, sizeof filename); /* Initialize the integer & floating-point dataset */ n=1.0; for(i = 0; i < DSET_DIM1; i++) for(j = 0; j < DSET_DIM2; j++) { points[i][j] = (int)n++; points_dbl[i][j] = (double)1.5*n++; } /* Open file */ if((file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0) { H5_FAILED(); printf(" Line %d: Can't open file\n",__LINE__); goto error; } /* Create dcpl with special filter */ if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) { H5_FAILED(); printf(" Line %d: Can't create dcpl\n",__LINE__); goto error; } /* end if */ if(H5Pset_chunk(dcpl, 2, chunk_dims) < 0) { H5_FAILED(); printf(" Line %d: Can't set chunk sizes\n",__LINE__); goto error; } /* end if */ if(H5Zregister (H5Z_SET_LOCAL_TEST) < 0) { H5_FAILED(); printf(" Line %d: Can't register 'set local' filter\n",__LINE__); goto error; } if(H5Pset_filter(dcpl, H5Z_FILTER_SET_LOCAL_TEST, 0, (size_t)BOGUS2_PERM_NPARMS, cd_values) < 0) { H5_FAILED(); printf(" Line %d: Can't set bogus2 filter\n",__LINE__); goto error; } /* Create the data space */ if((sid = H5Screate_simple(2, dims, NULL)) < 0) { H5_FAILED(); printf(" Line %d: Can't open dataspace\n",__LINE__); goto error; } /* end if */ /* Create new dataset */ if((dsid = H5Dcreate2(file, DSET_SET_LOCAL_NAME, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) { H5_FAILED(); printf(" Line %d: Can't create dataset\n",__LINE__); goto error; } /* end if */ /* Write data */ if(H5Dwrite(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, points) < 0) { H5_FAILED(); printf(" Line %d: Error writing dataset data\n",__LINE__); goto error; } /* end if */ /* Close dataset */ if(H5Dclose(dsid) < 0) { H5_FAILED(); printf(" Line %d: Can't close dataset\n",__LINE__); goto error; } /* end if */ /* Create new dataset */ /* (Shouldn't get modified by output filter) */ if((dsid = H5Dcreate2(file, DSET_SET_LOCAL_NAME_2, H5T_NATIVE_DOUBLE, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) { H5_FAILED(); printf(" Line %d: Can't create dataset\n",__LINE__); goto error; } /* end if */ /* Write data */ if(H5Dwrite(dsid, H5T_NATIVE_DOUBLE, H5S_ALL, H5S_ALL, H5P_DEFAULT, points_dbl) < 0) { H5_FAILED(); printf(" Line %d: Error writing dataset data\n",__LINE__); goto error; } /* end if */ /* Close dataset */ if(H5Dclose(dsid) < 0) { H5_FAILED(); printf(" Line %d: Can't close dataset\n",__LINE__); goto error; } /* end if */ /* Close dataspace */ if(H5Sclose(sid) < 0) { H5_FAILED(); printf(" Line %d: Can't close dataspace\n", __LINE__); goto error; } /* end if */ /* Close dataset creation property list */ if(H5Pclose(dcpl) < 0) { H5_FAILED(); printf(" Line %d: Can't close dcpl\n", __LINE__); goto error; } /* end if */ /* Close file (flushes & empties cache) */ if(H5Fclose(file) < 0) { H5_FAILED(); printf(" Line %d: Can't close file\n", __LINE__); goto error; } /* end if */ /* Open file */ if((file = H5Fopen(filename, H5F_ACC_RDWR, fapl)) < 0) { H5_FAILED(); printf(" Line %d: Can't open file\n", __LINE__); goto error; } /* Re-open dataset */ if((dsid = H5Dopen2(file, DSET_SET_LOCAL_NAME, H5P_DEFAULT)) < 0) { H5_FAILED(); printf(" Line %d: Can't open dataset\n", __LINE__); goto error; } /* end if */ /* Query the dataset's size on disk */ if((dset_size = H5Dget_storage_size(dsid)) == 0) { H5_FAILED(); printf(" Line %d: Error querying dataset size\n", __LINE__); goto error; } /* end if */ /* Verify that the size indicates data is uncompressed */ if((H5Tget_size(H5T_NATIVE_INT) * dims[0] * dims[1]) != dset_size) { H5_FAILED(); printf(" Line %d: Incorrect dataset size: %lu\n", __LINE__, (unsigned long)dset_size); goto error; } /* end if */ /* Read data */ if(H5Dread(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, check) < 0) { H5_FAILED(); printf(" Line %d: Error reading dataset data\n", __LINE__); goto error; } /* end if */ /* Compare data */ /* Check that the values read are the modified version of what was written */ for(i=0; i=0) { H5_FAILED(); printf(" Line %d: Shouldn't have deleted filter!\n",__LINE__); goto error; } /* end if */ /* try to delete the deflate filter again */ H5E_BEGIN_TRY { ret=H5Premove_filter(dcpl1,H5Z_FILTER_DEFLATE); } H5E_END_TRY; if(ret >=0) { H5_FAILED(); printf(" Line %d: Shouldn't have deleted filter!\n",__LINE__); goto error; } /* end if */ /*---------------------------------------------------------------------- * delete all filters *---------------------------------------------------------------------- */ /* delete all filters */ if(H5Premove_filter(dcpl1,H5Z_FILTER_ALL) < 0) goto error; /* get information about filters */ if((nfilters = H5Pget_nfilters(dcpl1)) < 0) goto error; /* check if filters were deleted */ if(nfilters)goto error; /*---------------------------------------------------------------------- * close *---------------------------------------------------------------------- */ /* clean up objects used for this test */ if(H5Pclose (dcpl) < 0) goto error; if(H5Pclose (dcpl1) < 0) goto error; if(H5Dclose (dsid) < 0) goto error; if(H5Sclose (sid) < 0) goto error; PASSED(); #else SKIPPED(); #endif return 0; error: H5E_BEGIN_TRY { H5Pclose(dcpl); H5Pclose(dcpl1); H5Dclose(dsid); H5Sclose(sid); } H5E_END_TRY; return -1; } /* end test_filter_delete() */ /*------------------------------------------------------------------------- * Function: auxread_fdata * * Purpose: reads a dataset "NAME" from FID * * Return: Success: 0 * Failure: -1 * * Programmer: Pedro Vicente * Monday, March 8, 2004 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t auxread_fdata(hid_t fid, const char *name) { hid_t dset_id=-1; /* dataset ID */ hid_t dcpl_id=-1; /* dataset creation property list ID */ hid_t space_id=-1; /* space ID */ hid_t ftype_id=-1; /* file data type ID */ hid_t mtype_id=-1; /* memory data type ID */ size_t msize; /* memory size of memory type */ void *buf=NULL; /* data buffer */ hsize_t nelmts; /* number of elements in dataset */ int rank; /* rank of dataset */ hsize_t dims[H5S_MAX_RANK];/* dimensions of dataset */ int i; if((dset_id = H5Dopen2(fid, name, H5P_DEFAULT)) < 0) goto error; if((space_id = H5Dget_space(dset_id)) < 0) goto error; if((ftype_id = H5Dget_type(dset_id)) < 0) goto error; if((dcpl_id = H5Dget_create_plist(dset_id)) < 0) goto error; if((rank = H5Sget_simple_extent_ndims(space_id)) < 0) goto error; HDmemset(dims, 0, sizeof dims); if(H5Sget_simple_extent_dims(space_id, dims, NULL) < 0) goto error; nelmts = 1; for(i = 0; i < rank; i++) nelmts *= dims[i]; if((mtype_id = H5Tget_native_type(ftype_id, H5T_DIR_DEFAULT)) < 0) goto error; if((msize = H5Tget_size(mtype_id)) == 0) goto error; if(nelmts) { buf = (void *)HDmalloc((size_t)(nelmts * msize)); if(buf == NULL) { printf( "cannot read into memory\n" ); goto error; } if(H5Dread(dset_id, mtype_id, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf) < 0) goto error; } if(H5Pclose(dcpl_id) < 0) goto error; if(H5Sclose(space_id) < 0) goto error; if(H5Dclose(dset_id) < 0) goto error; if(buf) free(buf); return 0; error: H5E_BEGIN_TRY { H5Pclose(dcpl_id); H5Sclose(space_id); H5Dclose(dset_id); H5Tclose(ftype_id); H5Tclose(mtype_id); if(buf) free(buf); } H5E_END_TRY; return -1; } /*------------------------------------------------------------------------- * Function: test_filters_endianess * * Purpose: Reads/writes data with filters (big-endian/little-endian data) * * Return: Success: 0 * Failure: -1 * * Programmer: Pedro Vicente * Monday, March 8, 2004 * *------------------------------------------------------------------------- */ static herr_t test_filters_endianess(void) { hid_t fid=-1; /* file ID */ hid_t dsid=-1; /* dataset ID */ hid_t sid=-1; /* dataspace ID */ hid_t dcpl=-1; /* dataset creation property list ID */ const char *data_file = H5_get_srcdir_filename("test_filters_le.hdf5"); /* Corrected test file name */ TESTING("filters with big-endian/little-endian data"); #if defined H5_HAVE_FILTER_FLETCHER32 /*------------------------------------------------------------------------- * step 1: open a file written on a little-endian machine *------------------------------------------------------------------------- */ /* open */ if((fid = H5Fopen(data_file, H5F_ACC_RDONLY, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR /* read */ if(auxread_fdata(fid,"dset") < 0) TEST_ERROR /* close */ if(H5Fclose(fid) < 0) FAIL_STACK_ERROR /*------------------------------------------------------------------------- * step 2: open a file written on a big-endian machine *------------------------------------------------------------------------- */ /* compose the name of the file to open, using the srcdir, if appropriate */ data_file = H5_get_srcdir_filename("test_filters_be.hdf5"); /* Corrected test file name */ /* open */ if((fid = H5Fopen(data_file, H5F_ACC_RDONLY, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR /* read */ if(auxread_fdata(fid,"dset") < 0) TEST_ERROR /* close */ if(H5Fclose(fid) < 0) FAIL_STACK_ERROR PASSED(); #else SKIPPED(); #endif return 0; error: H5E_BEGIN_TRY { H5Pclose(dcpl); H5Dclose(dsid); H5Sclose(sid); H5Fclose(fid); } H5E_END_TRY; return -1; } /* end test_filters_endianess() */ /*------------------------------------------------------------------------- * Function: test_zero_dims * * Purpose: Tests read/writes to zero-sized extendible datasets * * Return: Success: 0 * Failure: -1 * * Programmer: Quincey Koziol * Tuesday, July 27, 2004 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_zero_dims(hid_t file) { hid_t s=-1, d=-1, dcpl=-1; hsize_t dsize=0, dmax=H5S_UNLIMITED, csize=5; TESTING("I/O on datasets with zero-sized dims"); if((s = H5Screate_simple(1, &dsize, &dmax)) < 0) TEST_ERROR; if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) TEST_ERROR; if(H5Pset_chunk(dcpl, 1, &csize) < 0) TEST_ERROR; if((d = H5Dcreate2(file, ZERODIM_DATASET, H5T_NATIVE_INT, s, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) TEST_ERROR; if(H5Dwrite(d, H5T_NATIVE_INT, s, s, H5P_DEFAULT, (void*)911) < 0) TEST_ERROR; if(H5Pclose(dcpl) < 0) TEST_ERROR; if(H5Sclose(s) < 0) TEST_ERROR; if(H5Dclose(d) < 0) TEST_ERROR; PASSED(); return 0; error: H5E_BEGIN_TRY { H5Pclose(dcpl); H5Dclose(d); H5Sclose(s); } H5E_END_TRY; return -1; } /* end test_zero_dims() */ /*------------------------------------------------------------------------- * Function: test_missing_chunk * * Purpose: Tests that reads from chunked dataset with undefined fill value and * not all chunks written don't overwrite data in user's buffer * for missing chunks. * * Return: Success: 0 * Failure: -1 * * Programmer: Quincey Koziol * Tuesday, August 25, 2004 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_missing_chunk(hid_t file) { hid_t s=-1, d=-1, dcpl=-1; hsize_t hs_start[1]; hsize_t hs_stride[1], hs_count[1], hs_block[1]; int wdata[MISSING_CHUNK_DIM], rdata[MISSING_CHUNK_DIM]; hsize_t dsize=100, dmax=H5S_UNLIMITED, csize=5; size_t u; TESTING("Read dataset with unwritten chunk & undefined fill value"); /* Initialize data */ for(u=0; u=5) { if(rdata[u]!=911) { printf(" Line %d: Incorrect value, rdata[%u]=%d\n",__LINE__,(unsigned)u,rdata[u]); TEST_ERROR; } /* end if */ } /* end if */ else { if(rdata[u]!=wdata[u]) { printf(" Line %d: Incorrect value, wdata[%u]=%d, rdata[%u]=%d\n",__LINE__,(unsigned)u,wdata[u],(unsigned)u,rdata[u]); TEST_ERROR; } /* end if */ } /* end else */ } /* end for */ /* Close everything */ if(H5Pclose(dcpl) < 0) TEST_ERROR; if(H5Sclose(s) < 0) TEST_ERROR; if(H5Dclose(d) < 0) TEST_ERROR; PASSED(); return 0; error: H5E_BEGIN_TRY { H5Pclose(dcpl); H5Dclose(d); H5Sclose(s); } H5E_END_TRY; return -1; } /* end test_zero_dims() */ /*------------------------------------------------------------------------- * Function: test_random_chunks * * Purpose: Tests that write/read on randomly selected chunks in 2 datasets. * One dataset has fixed dimensions, and the other has unlimited * dimensions which are extended before write/read operations. * * * Return: Success: 0 * Failure: -1 * * Programmer: Christian Chilan * Monday, March 26, 2007 * * Modifications: * *------------------------------------------------------------------------- */ static herr_t test_random_chunks(hid_t fapl) { char filename[FILENAME_BUF_SIZE]; hid_t s=-1, m=-1, d=-1, dcpl=-1, file=-1; int wbuf[NPOINTS], rbuf[NPOINTS], check2[20][20]; hsize_t coord[NPOINTS][2]; hsize_t dsize[2]={100,100}, dmax[2]={H5S_UNLIMITED, H5S_UNLIMITED}, csize[2]={10,10}, nsize[2]={200,200}; hsize_t msize[1]={NPOINTS}; const char dname[]="dataset"; int chunk_row, chunk_col; size_t i, j; TESTING("Write/read on randomly selected chunks"); assert(NPOINTS < 100); h5_fixname(FILENAME[6], fapl, filename, sizeof filename); /* Create file for first test */ if((file = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR; /* Create dataspace */ if((s = H5Screate_simple(2, dsize, NULL)) < 0) TEST_ERROR; /* Create dataset creation property list */ if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) TEST_ERROR; /* Set chunked layout */ if(H5Pset_chunk(dcpl, 2, csize) < 0) TEST_ERROR; /* Set early allocation time */ if(H5Pset_alloc_time(dcpl, H5D_ALLOC_TIME_EARLY) < 0) TEST_ERROR; /* Create dataset */ if((d = H5Dcreate2(file, dname, H5T_NATIVE_INT, s, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) TEST_ERROR; /* Initialization of check array for repeated coordinates */ for(i=0; i=0); /* Create a small data space for compact dataset */ small_dims[0] = 16; small_dims[1] = 8; small_space = H5Screate_simple(2, small_dims, NULL); assert(space>=0); /* * Create a dataset using the default dataset creation properties. We're * not sure what they are, so we won't check. */ if((dataset = H5Dcreate1(file, DSET_DEPREC_NAME, H5T_NATIVE_DOUBLE, space, H5P_DEFAULT)) < 0) goto error; /* Close the dataset */ if(H5Dclose(dataset) < 0) goto error; /* * Try creating a dataset that already exists. This should fail since a * dataset can only be created once. Temporarily turn off error * reporting. */ H5E_BEGIN_TRY { dataset = H5Dcreate1(file, DSET_DEFAULT_NAME, H5T_NATIVE_DOUBLE, space, H5P_DEFAULT); } H5E_END_TRY; if(dataset >= 0) { H5_FAILED(); puts(" Library allowed overwrite of existing dataset."); goto error; } /* * Open the dataset we created above and then close it. This is how * existing datasets are accessed. */ if((dataset = H5Dopen1(file, DSET_DEPREC_NAME)) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; /* * Try opening a non-existent dataset. This should fail since new datasets * cannot be created with this function. Temporarily turn off error * reporting. */ H5E_BEGIN_TRY { dataset = H5Dopen1(file, "does_not_exist"); } H5E_END_TRY; if(dataset >= 0) { H5_FAILED(); puts(" Opened a non-existent dataset."); goto error; } /* * Create a new dataset that uses chunked storage instead of the default * layout. */ create_parms = H5Pcreate(H5P_DATASET_CREATE); assert(create_parms >= 0); /* Add the deflate filter, if available */ #if defined H5_HAVE_FILTER_DEFLATE { H5Z_filter_t filtn; /* filter identification number */ size_t cd_nelmts = 1; /* Number of filter parameters */ unsigned cd_value; /* Filter parameter */ if(H5Pset_deflate(create_parms, 6) < 0) goto error; /* Check for the deflate filter */ filtn = H5Pget_filter1(create_parms, (unsigned)0, NULL, &cd_nelmts, &cd_value, (size_t)0, NULL); if(H5Z_FILTER_DEFLATE != filtn) goto error; if(1 != cd_nelmts) goto error; if(6 != cd_value) goto error; /* Check for the deflate filter */ if(H5Pget_filter_by_id1(create_parms, H5Z_FILTER_DEFLATE, NULL, &cd_nelmts, &cd_value, (size_t)0, NULL) < 0) goto error; if(1 != cd_nelmts) goto error; if(6 != cd_value) goto error; } #endif /* H5_HAVE_FILTER_DEFLATE */ /* Attempt to create a dataset with invalid chunk sizes */ csize[0] = dims[0]*2; csize[1] = dims[1]*2; status = H5Pset_chunk(create_parms, 2, csize); assert(status >= 0); H5E_BEGIN_TRY { dataset = H5Dcreate1(file, DSET_DEPREC_NAME_CHUNKED, H5T_NATIVE_DOUBLE, space, create_parms); } H5E_END_TRY; if(dataset >= 0) { H5_FAILED(); puts(" Opened a dataset with incorrect chunking parameters."); goto error; } csize[0] = 5; csize[1] = 100; status = H5Pset_chunk(create_parms, 2, csize); assert(status >= 0); if((dataset = H5Dcreate1(file, DSET_DEPREC_NAME_CHUNKED, H5T_NATIVE_DOUBLE, space, create_parms)) < 0) goto error; H5Pclose(create_parms); /* * Close the chunked dataset. */ if(H5Dclose(dataset) < 0) goto error; /* * Open the dataset we created above and then close it. This is how * existing datasets are accessed. */ if((dataset = H5Dopen1(file, DSET_DEPREC_NAME_CHUNKED)) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; /* * Create a compact dataset, then close it. */ create_parms = H5Pcreate(H5P_DATASET_CREATE); assert(create_parms >= 0); status = H5Pset_layout(create_parms, H5D_COMPACT); assert(status >= 0); status = H5Pset_alloc_time(create_parms, H5D_ALLOC_TIME_EARLY); assert(status >= 0); if((dataset = H5Dcreate1(file, DSET_DEPREC_NAME_COMPACT, H5T_NATIVE_DOUBLE, small_space, create_parms)) < 0) goto error; H5Pclose(create_parms); if(H5Dclose(dataset) < 0) goto error; /* * Open the dataset we created above and then close it. This is how * existing datasets are accessed. */ if((dataset = H5Dopen1(file, DSET_DEPREC_NAME_COMPACT)) < 0) goto error; if(H5Dclose(dataset) < 0) goto error; /* Test H5Zregister with deprecated H5Z_class1_t */ if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error; if(H5Pset_chunk(dcpl, 2, csize) < 0) goto error; if(H5Zregister(H5Z_DEPREC) < 0) goto error; if(H5Pset_filter(dcpl, H5Z_FILTER_DEPREC, 0, (size_t)0, NULL) < 0) goto error; puts(""); if(test_filter_internal(file,DSET_DEPREC_NAME_FILTER,dcpl,DISABLE_FLETCHER32,DATA_NOT_CORRUPTED,&deprec_size) < 0) goto error; if(H5Pclose(dcpl) < 0) goto error; return 0; error: return -1; } /* end test_deprec() */ #endif /* H5_NO_DEPRECATED_SYMBOLS */ /*------------------------------------------------------------------------- * Function: test_huge_chunks * * Purpose: Tests that datasets with chunks >4GB can't be created. * * Return: Success: 0 * Failure: -1 * * Programmer: Quincey Koziol * Thursday, May 1, 2008 * *------------------------------------------------------------------------- */ static herr_t test_huge_chunks(hid_t fapl) { char filename[FILENAME_BUF_SIZE]; hid_t fid = -1; /* File ID */ hid_t dcpl = -1; /* Dataset creation property list ID */ hid_t sid = -1; /* Dataspace ID */ hid_t dsid = -1; /* Dataset ID */ hsize_t dim, chunk_dim; /* Dataset and chunk dimensions */ hsize_t dim2[3], chunk_dim2[3]; /* Dataset and chunk dimensions */ herr_t ret; /* Generic return value */ TESTING("creating dataset with >4GB chunks"); h5_fixname(FILENAME[7], fapl, filename, sizeof filename); /* Create file */ if((fid = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0) FAIL_STACK_ERROR /* Create dataset creation property list */ if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) FAIL_STACK_ERROR /* Try to set too large of a chunk for 1-D dataset (# of elements) */ chunk_dim = TOO_HUGE_CHUNK_DIM; H5E_BEGIN_TRY { ret = H5Pset_chunk(dcpl, 1, &chunk_dim); } H5E_END_TRY; if(ret >= 0) FAIL_PUTS_ERROR(" Set chunk size with too large of chunk dimensions.") /* Try to set too large of a chunk for n-D dataset (# of elements) */ chunk_dim2[0] = TOO_HUGE_CHUNK_DIM2_0; chunk_dim2[1] = TOO_HUGE_CHUNK_DIM2_1; chunk_dim2[2] = TOO_HUGE_CHUNK_DIM2_2; H5E_BEGIN_TRY { ret = H5Pset_chunk(dcpl, 3, chunk_dim2); } H5E_END_TRY; if(ret >= 0) FAIL_PUTS_ERROR(" Set chunk size with too large of chunk dimensions.") /* Set 1-D chunk size */ chunk_dim = HUGE_CHUNK_DIM; if(H5Pset_chunk(dcpl, 1, &chunk_dim) < 0) FAIL_STACK_ERROR /* Create 1-D dataspace */ dim = HUGE_DIM; if((sid = H5Screate_simple(1, &dim, NULL)) < 0) FAIL_STACK_ERROR /* Try to create dataset */ H5E_BEGIN_TRY { dsid = H5Dcreate2(fid, HUGE_DATASET, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT); } H5E_END_TRY; if(dsid >= 0) FAIL_PUTS_ERROR(" 1-D Dataset with too large of chunk dimensions created.") /* Close 1-D dataspace */ if(H5Sclose(sid) < 0) FAIL_STACK_ERROR /* Set n-D chunk size */ chunk_dim2[0] = HUGE_CHUNK_DIM2_0; chunk_dim2[1] = HUGE_CHUNK_DIM2_1; chunk_dim2[2] = HUGE_CHUNK_DIM2_2; if(H5Pset_chunk(dcpl, 3, chunk_dim2) < 0) FAIL_STACK_ERROR /* Create n-D dataspace */ dim2[0] = HUGE_DIM2_0; dim2[1] = HUGE_DIM2_1; dim2[2] = HUGE_DIM2_2; if((sid = H5Screate_simple(3, dim2, NULL)) < 0) FAIL_STACK_ERROR /* Try to create dataset */ H5E_BEGIN_TRY { dsid = H5Dcreate2(fid, HUGE_DATASET2, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT); } H5E_END_TRY; if(dsid >= 0) FAIL_PUTS_ERROR(" n-D Dataset with too large of chunk dimensions created.") /* Close n-D dataspace */ if(H5Sclose(sid) < 0) FAIL_STACK_ERROR /* Close everything else */ if(H5Pclose(dcpl) < 0) FAIL_STACK_ERROR if(H5Fclose(fid) < 0) FAIL_STACK_ERROR PASSED(); return 0; error: H5E_BEGIN_TRY { H5Pclose(dcpl); H5Dclose(dsid); H5Sclose(sid); H5Fclose(fid); } H5E_END_TRY; return -1; } /* end test_huge_chunks() */ /*------------------------------------------------------------------------- * Function: test_chunk_cache * * Purpose: Tests API for setting rdcc info on a DAPL, and interaction * with the corresponding properties in the file structure. * * Return: Success: 0 * Failure: -1 * * Programmer: Neil Fortner * Wednesday, October 29, 2008 * *------------------------------------------------------------------------- */ static herr_t test_chunk_cache(hid_t fapl) { char filename[FILENAME_BUF_SIZE]; hid_t fid = -1; /* File ID */ hid_t fapl_local = -1; /* Local fapl */ hid_t fapl_def = -1; /* Default fapl */ hid_t dcpl = -1; /* Dataset creation property list ID */ hid_t dapl1 = -1; /* Dataset access property list ID */ hid_t dapl2 = -1; /* Dataset access property list ID */ hid_t sid = -1; /* Dataspace ID */ hid_t dsid = -1; /* Dataset ID */ hsize_t dim, chunk_dim; /* Dataset and chunk dimensions */ size_t nslots_1, nslots_2, nslots_3, nslots_4; /* rdcc number of elements */ size_t nbytes_1, nbytes_2, nbytes_3, nbytes_4; /* rdcc number of bytes */ size_t nlinks; /* Number of link traversals */ double w0_1, w0_2, w0_3, w0_4; /* rdcc preemption policy */ TESTING("dataset chunk cache configuration"); /* Create a default fapl and dapl */ if ((fapl_def = H5Pcreate(H5P_FILE_ACCESS)) < 0) FAIL_STACK_ERROR if ((dapl1 = H5Pcreate(H5P_DATASET_ACCESS)) < 0) FAIL_STACK_ERROR /* Verify that H5Pget_chunk_cache(dapl) returns the same values as are in * the default fapl. */ if (H5Pget_cache(fapl_def, NULL, &nslots_1, &nbytes_1, &w0_1) < 0) FAIL_STACK_ERROR if (H5Pget_chunk_cache(dapl1, &nslots_4, &nbytes_4, &w0_4) < 0) FAIL_STACK_ERROR if ((nslots_1 != nslots_4) || (nbytes_1 != nbytes_4) || !DBL_ABS_EQUAL(w0_1, w0_4)) FAIL_PUTS_ERROR(" Cache values from default dapl do not match those from fapl.") /* Set a lapl property on dapl1 (to verify inheritance) */ if (H5Pset_nlinks(dapl1, 134) < 0) FAIL_STACK_ERROR if (H5Pget_nlinks(dapl1, &nlinks) < 0) FAIL_STACK_ERROR if (nlinks != 134) FAIL_PUTS_ERROR(" nlinks parameter not set properly on dapl.") /* Copy fapl passed to this function (as we will be modifying it) */ if ((fapl_local = H5Pcopy(fapl)) < 0) FAIL_STACK_ERROR /* Set new rdcc settings on fapl */ nslots_2 = nslots_1 * 2; nbytes_2 = nbytes_1 * 2; w0_2 = w0_1 / 2.; if (H5Pset_cache(fapl_local, 0, nslots_2, nbytes_2, w0_2) < 0) FAIL_STACK_ERROR h5_fixname(FILENAME[8], fapl, filename, sizeof filename); /* Create file */ if ((fid = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl_local)) < 0) FAIL_STACK_ERROR /* Create dataset creation property list */ if ((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) FAIL_STACK_ERROR /* Set chunking */ chunk_dim = 10; if (H5Pset_chunk(dcpl, 1, &chunk_dim) < 0) FAIL_STACK_ERROR /* Create 1-D dataspace */ dim = 100; if ((sid = H5Screate_simple(1, &dim, NULL)) < 0) FAIL_STACK_ERROR /* Create dataset with default dapl */ if ((dsid = H5Dcreate2(fid, "dset", H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, dapl1)) < 0) FAIL_STACK_ERROR /* Retrieve dapl from dataset, verfiy cache values are the same as on fapl_local */ if ((dapl2 = H5Dget_access_plist(dsid)) < 0) FAIL_STACK_ERROR if (H5Pget_chunk_cache(dapl2, &nslots_4, &nbytes_4, &w0_4) < 0) FAIL_STACK_ERROR if ((nslots_2 != nslots_4) || (nbytes_2 != nbytes_4) || !DBL_ABS_EQUAL(w0_2, w0_4)) FAIL_PUTS_ERROR(" Cache values from retrieved dapl do not match those from fapl.") if (H5Pclose(dapl2) < 0) FAIL_STACK_ERROR /* Set new values on dapl1. nbytes will be set to default, so the file * property will override this setting */ nslots_3 = nslots_2 * 2; nbytes_3 = H5D_CHUNK_CACHE_NBYTES_DEFAULT; w0_3 = w0_2 / 2; if (H5Pset_chunk_cache(dapl1, nslots_3, nbytes_3, w0_3) < 0) FAIL_STACK_ERROR /* Close dataset, reopen with dapl1. Note the use of a dapl with H5Oopen */ if (H5Dclose(dsid) < 0) FAIL_STACK_ERROR if ((dsid = H5Oopen(fid, "dset", dapl1)) < 0) FAIL_STACK_ERROR /* Retrieve dapl from dataset, verfiy cache values are the same as on dapl1 */ /* Note we rely on the knowledge that H5Pget_chunk_cache retrieves these * values directly from the dataset structure, and not from a copy of the * dapl used to open the dataset (which is not preserved). */ if ((dapl2 = H5Dget_access_plist(dsid)) < 0) FAIL_STACK_ERROR if (H5Pget_chunk_cache(dapl2, &nslots_4, &nbytes_4, &w0_4) < 0) FAIL_STACK_ERROR if ((nslots_3 != nslots_4) || (nbytes_2 != nbytes_4) || !DBL_ABS_EQUAL(w0_3, w0_4)) FAIL_PUTS_ERROR(" Cache values from retrieved dapl do not match those from dapl1.") if (H5Pclose(dapl2) < 0) FAIL_STACK_ERROR /* Close dataset, reopen with H5P_DEFAULT as dapl */ if (H5Dclose(dsid) < 0) FAIL_STACK_ERROR if ((dsid = H5Dopen2(fid, "dset", H5P_DEFAULT)) < 0) FAIL_STACK_ERROR /* Retrieve dapl from dataset, verfiy cache values are the same on fapl_local */ if ((dapl2 = H5Dget_access_plist(dsid)) < 0) FAIL_STACK_ERROR if (H5Pget_chunk_cache(dapl2, &nslots_4, &nbytes_4, &w0_4) < 0) FAIL_STACK_ERROR if ((nslots_2 != nslots_4) || (nbytes_2 != nbytes_4) || !DBL_ABS_EQUAL(w0_2, w0_4)) FAIL_PUTS_ERROR(" Cache values from retrieved dapl do not match those from fapl.") if (H5Pclose(dapl2) < 0) FAIL_STACK_ERROR /* Similary, test use of H5Dcreate2 with H5P_DEFAULT */ if (H5Dclose(dsid) < 0) FAIL_STACK_ERROR if ((dsid = H5Dcreate2(fid, "dset2", H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR if ((dapl2 = H5Dget_access_plist(dsid)) < 0) FAIL_STACK_ERROR if (H5Pget_chunk_cache(dapl2, &nslots_4, &nbytes_4, &w0_4) < 0) FAIL_STACK_ERROR if ((nslots_2 != nslots_4) || (nbytes_2 != nbytes_4) || !DBL_ABS_EQUAL(w0_2, w0_4)) FAIL_PUTS_ERROR(" Cache values from retrieved dapl do not match those from fapl.") /* Don't close dapl2, we will use it in the next section */ /* Modify cache values on fapl_local */ nbytes_3 = nbytes_2 * 2; if (H5Pset_cache(fapl_local, 0, nslots_3, nbytes_3, w0_3) < 0) FAIL_STACK_ERROR /* Close and reopen file with new fapl_local */ if (H5Dclose(dsid) < 0) FAIL_STACK_ERROR if (H5Fclose(fid) < 0) FAIL_STACK_ERROR if ((fid = H5Fopen(filename, H5F_ACC_RDWR, fapl_local)) < 0) FAIL_STACK_ERROR /* Verify that dapl2 retrieved earlier (using values from the old fapl) * sets its values in the new file (test use of H5Dopen2 with a dapl) */ if ((dsid = H5Dopen2(fid, "dset", dapl2)) < 0) FAIL_STACK_ERROR if (H5Pclose(dapl2) < 0) FAIL_STACK_ERROR /* Close dapl2, to avoid id leak */ if ((dapl2 = H5Dget_access_plist(dsid)) < 0) FAIL_STACK_ERROR if (H5Pget_chunk_cache(dapl2, &nslots_4, &nbytes_4, &w0_4) < 0) FAIL_STACK_ERROR if ((nslots_2 != nslots_4) || (nbytes_2 != nbytes_4) || !DBL_ABS_EQUAL(w0_2, w0_4)) FAIL_PUTS_ERROR(" Cache values from retrieved dapl do not match those from dapl2.") /* Test H5D_CHUNK_CACHE_NSLOTS_DEFAULT and H5D_CHUNK_CACHE_W0_DEFAULT */ nslots_2 = H5D_CHUNK_CACHE_NSLOTS_DEFAULT; w0_2 = H5D_CHUNK_CACHE_W0_DEFAULT; if (H5Pset_chunk_cache(dapl2, nslots_2, nbytes_2, w0_2) < 0) FAIL_STACK_ERROR if (H5Dclose(dsid) < 0) FAIL_STACK_ERROR if ((dsid = H5Dopen2(fid, "dset", dapl2)) < 0) FAIL_STACK_ERROR if (H5Pclose(dapl2) < 0) FAIL_STACK_ERROR /* Close dapl2, to avoid id leak */ if ((dapl2 = H5Dget_access_plist(dsid)) < 0) FAIL_STACK_ERROR if (H5Pget_chunk_cache(dapl2, &nslots_4, &nbytes_4, &w0_4) < 0) FAIL_STACK_ERROR if ((nslots_3 != nslots_4) || (nbytes_2 != nbytes_4) || !DBL_ABS_EQUAL(w0_3, w0_4)) FAIL_PUTS_ERROR(" Cache values from retrieved dapl do not match those expected.") if (H5Pclose(dapl2) < 0) FAIL_STACK_ERROR /* Verify that the file has indeed started using the new cache values (test * use of H5Oopen with H5P_DEFAULT) */ if (H5Dclose(dsid) < 0) FAIL_STACK_ERROR if ((dsid = H5Oopen(fid, "dset", H5P_DEFAULT)) < 0) FAIL_STACK_ERROR if ((dapl2 = H5Dget_access_plist(dsid)) < 0) FAIL_STACK_ERROR if (H5Pget_chunk_cache(dapl2, &nslots_4, &nbytes_4, &w0_4) < 0) FAIL_STACK_ERROR if ((nslots_3 != nslots_4) || (nbytes_3 != nbytes_4) || !DBL_ABS_EQUAL(w0_3, w0_4)) FAIL_PUTS_ERROR(" Cache values from retrieved dapl do not match those from fapl.") if (H5Pclose(dapl2) < 0) FAIL_STACK_ERROR /* Verify functionality of H5Pcopy with a dapl */ if ((dapl2 = H5Pcopy(dapl1)) < 0) FAIL_STACK_ERROR if (H5Pget_chunk_cache(dapl2, &nslots_4, &nbytes_4, &w0_4) < 0) FAIL_STACK_ERROR if ((nslots_3 != nslots_4) || (nbytes_1 != nbytes_4) || !DBL_ABS_EQUAL(w0_3, w0_4)) FAIL_PUTS_ERROR(" Cache values from dapl2 do not match those from dapl1.") /* Close */ if (H5Dclose(dsid) < 0) FAIL_STACK_ERROR if (H5Sclose(sid) < 0) FAIL_STACK_ERROR if (H5Pclose(fapl_local) < 0) FAIL_STACK_ERROR if (H5Pclose(fapl_def) < 0) FAIL_STACK_ERROR if (H5Pclose(dapl1) < 0) FAIL_STACK_ERROR if (H5Pclose(dapl2) < 0) FAIL_STACK_ERROR if (H5Pclose(dcpl) < 0) FAIL_STACK_ERROR if (H5Fclose(fid) < 0) FAIL_STACK_ERROR PASSED(); return 0; error: H5E_BEGIN_TRY { H5Pclose(fapl_local); H5Pclose(fapl_def); H5Pclose(dapl1); H5Pclose(dapl2); H5Pclose(dcpl); H5Dclose(dsid); H5Sclose(sid); H5Fclose(fid); } H5E_END_TRY; return -1; } /* end test_chunk_cache() */ /*------------------------------------------------------------------------- * Function: test_big_chunks_bypass_cache * * Purpose: When the chunk size is bigger than the cache size and the * chunk isn't on disk, this test verifies that the library * bypasses the cache. * * Note: This test is not very conclusive - it doesn't actually check * if the chunks bypass the cache... :-( -QAK * * Return: Success: 0 * Failure: -1 * * Programmer: Raymond Lu * 11 Feb 2009 * *------------------------------------------------------------------------- */ static herr_t test_big_chunks_bypass_cache(hid_t fapl) { char filename[FILENAME_BUF_SIZE]; hid_t fid = -1; /* File ID */ hid_t fapl_local = -1; /* File access property list ID */ hid_t dcpl = -1; /* Dataset creation property list ID */ hid_t sid = -1; /* Dataspace ID */ hid_t dsid = -1; /* Dataset ID */ hsize_t dim, chunk_dim; /* Dataset and chunk dimensions */ size_t rdcc_nelmts, rdcc_nbytes; int fvalue = BYPASS_FILL_VALUE; hsize_t count, stride, offset, block; static int wdata[BYPASS_CHUNK_DIM/2], rdata1[BYPASS_DIM], rdata2[BYPASS_CHUNK_DIM/2]; int i, j; TESTING("big chunks bypassing the cache"); h5_fixname(FILENAME[9], fapl, filename, sizeof filename); /* Copy fapl passed to this function (as we will be modifying it) */ if((fapl_local = H5Pcopy(fapl)) < 0) FAIL_STACK_ERROR /* Define cache size to be smaller than chunk size */ rdcc_nelmts = BYPASS_CHUNK_DIM/5; rdcc_nbytes = sizeof(int)*BYPASS_CHUNK_DIM/5; if(H5Pset_cache(fapl_local, 0, rdcc_nelmts, rdcc_nbytes, (double)0.0) < 0) FAIL_STACK_ERROR /* Create file */ if((fid = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl_local)) < 0) FAIL_STACK_ERROR /* Create 1-D dataspace */ dim = BYPASS_DIM; if((sid = H5Screate_simple(1, &dim, NULL)) < 0) FAIL_STACK_ERROR /* Create dataset creation property list */ if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) FAIL_STACK_ERROR /* Define chunk size. There will be only 2 chunks in the dataset. */ chunk_dim = BYPASS_CHUNK_DIM; if(H5Pset_chunk(dcpl, 1, &chunk_dim) < 0) FAIL_STACK_ERROR /* Define fill value, fill time, and chunk allocation time */ if(H5Pset_fill_value(dcpl, H5T_NATIVE_INT, &fvalue) < 0) FAIL_STACK_ERROR if(H5Pset_fill_time(dcpl, H5D_FILL_TIME_IFSET) < 0) FAIL_STACK_ERROR if(H5Pset_alloc_time(dcpl, H5D_ALLOC_TIME_INCR) < 0) FAIL_STACK_ERROR /* Create a first dataset */ if((dsid = H5Dcreate2(fid, BYPASS_DATASET1, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR /* Select first chunk to write the data */ offset = 0; count = 1; stride = 1; block = BYPASS_CHUNK_DIM / 2; if(H5Sselect_hyperslab(sid, H5S_SELECT_SET, &offset, &stride, &count, &block) < 0) FAIL_STACK_ERROR /* Initialize data to write */ for(i = 0; i < BYPASS_CHUNK_DIM / 2; i++) wdata[i] = i; /* This write should go through the cache because fill value is used. */ if(H5Dwrite(dsid, H5T_NATIVE_INT, H5S_ALL, sid, H5P_DEFAULT, wdata) < 0) FAIL_STACK_ERROR if(H5Dclose(dsid) < 0) FAIL_STACK_ERROR /* Reopen the dataset */ if((dsid = H5Dopen2(fid, BYPASS_DATASET1, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR /* Reads both 2 chunks. Reading the second chunk should bypass the cache because the * chunk is bigger than the cache size and it isn't allocated on disk. */ if(H5Dread(dsid, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, rdata1) < 0) FAIL_STACK_ERROR for(i = 0; i < BYPASS_CHUNK_DIM / 2; i++) if(rdata1[i] != i) { printf(" Read different values than written in the 1st chunk.\n"); printf(" At line %d and index %d, rdata1 = %d. It should be %d.\n", __LINE__, i, rdata1[i], i); TEST_ERROR } /* end if */ for(j = BYPASS_CHUNK_DIM / 2; j < BYPASS_DIM; j++) if(rdata1[j] != fvalue) { printf(" Read different values than written in the 2nd chunk.\n"); printf(" At line %d and index %d, rdata1 = %d. It should be %d.\n", __LINE__, i, rdata1[i], fvalue); TEST_ERROR } /* end if */ /* Close the first dataset */ if(H5Dclose(dsid) < 0) FAIL_STACK_ERROR /* Create a second dataset without fill value. This time, both write * and read should bypass the cache because the chunk is bigger than the * cache size and it's not allocated on disk. */ if(H5Pset_fill_time(dcpl, H5D_FILL_TIME_NEVER) < 0) FAIL_STACK_ERROR if((dsid = H5Dcreate2(fid, BYPASS_DATASET2, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR if(H5Dwrite(dsid, H5T_NATIVE_INT, H5S_ALL, sid, H5P_DEFAULT, wdata) < 0) FAIL_STACK_ERROR if(H5Dclose(dsid) < 0) FAIL_STACK_ERROR /* Reopen the dataset */ if((dsid = H5Dopen2(fid, BYPASS_DATASET2, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR /* Read back only the part that was written to the file. Reading the * half chunk should bypass the cache because the chunk is bigger than * the cache size. */ if(H5Dread(dsid, H5T_NATIVE_INT, H5S_ALL, sid, H5P_DEFAULT, rdata2) < 0) for(i = 0; i < BYPASS_CHUNK_DIM / 2; i++) if(rdata2[i] != i) { printf(" Read different values than written in the chunk.\n"); printf(" At line %d and index %d, rdata2 = %d. It should be %d.\n", __LINE__, i, rdata2[i], i); TEST_ERROR } /* end if */ /* Close IDs */ if(H5Sclose(sid) < 0) FAIL_STACK_ERROR if(H5Dclose(dsid) < 0) FAIL_STACK_ERROR if(H5Pclose(dcpl) < 0) FAIL_STACK_ERROR if(H5Pclose(fapl_local) < 0) FAIL_STACK_ERROR if(H5Fclose(fid) < 0) FAIL_STACK_ERROR PASSED(); return 0; error: H5E_BEGIN_TRY { H5Pclose(dcpl); H5Pclose(fapl_local); H5Dclose(dsid); H5Sclose(sid); H5Fclose(fid); } H5E_END_TRY; return -1; } /* end test_big_chunks_bypass_cache() */ /* This message derives from H5Z */ const H5Z_class2_t H5Z_EXPAND[1] = {{ H5Z_CLASS_T_VERS, /* H5Z_class_t version */ H5Z_FILTER_EXPAND, /* Filter id number */ 1, 1, /* Encoding and decoding enabled */ "expand", /* Filter name for debugging */ NULL, /* The "can apply" callback */ NULL, /* The "set local" callback */ filter_expand, /* The actual filter function */ }}; /* Global "expansion factor" for filter_expand() routine */ static size_t filter_expand_factor_g = 0; /*------------------------------------------------------------------------- * Function: filter_expand * * Purpose: For testing library's behavior when a filter expands a chunk * too much. * * Note: This filter doesn't actually re-allocate the buffer to be * larger, it just changes the buffer size to a value that's too * large. The library should throw an error before using the * incorrect buffer information. * * Return: Success: Data chunk size * Failure: 0 * * Programmer: Quincey Koziol * Mar 31, 2009 * *------------------------------------------------------------------------- */ static size_t filter_expand(unsigned int flags, size_t UNUSED cd_nelmts, const unsigned int UNUSED *cd_values, size_t nbytes, size_t *buf_size, void UNUSED **buf) { size_t ret_value = 0; if(flags & H5Z_FLAG_REVERSE) { /* Don't do anything when filter is applied in reverse */ *buf_size = nbytes; ret_value = nbytes; } /* end if */ else { /* Check for expanding the chunk */ if(filter_expand_factor_g > 0) { /* Expand the buffer size beyond what can be encoded */ *buf_size = nbytes * 256 * 256 * 256 * filter_expand_factor_g; ret_value = *buf_size; } /* end if */ else { /* Don't expand the chunk's size */ *buf_size = nbytes; ret_value = nbytes; } /* end else */ } /* end else */ return ret_value; } /* end filter_expand() */ /*------------------------------------------------------------------------- * Function: test_chunk_expand * * Purpose: Tests support for proper error handling when a chunk expands * too much after a filter is applied * * Return: Success: 0 * Failure: -1 * * Programmer: Quincey Koziol * Tuesday, March 31, 2009 * *------------------------------------------------------------------------- */ static herr_t test_chunk_expand(hid_t fapl) { char filename[FILENAME_BUF_SIZE]; hid_t fid = -1; /* File ID */ hid_t dcpl = -1; /* Dataset creation property list ID */ hid_t sid = -1; /* Dataspace ID */ hid_t scalar_sid = -1;/* Scalar dataspace ID */ hid_t dsid = -1; /* Dataset ID */ hsize_t dim, max_dim, chunk_dim; /* Dataset and chunk dimensions */ hsize_t hs_offset; /* Hyperslab offset */ hsize_t hs_size; /* Hyperslab size */ H5D_alloc_time_t alloc_time; /* Storage allocation time */ unsigned write_elem, read_elem; /* Element written/read */ unsigned u; /* Local index variable */ herr_t status; /* Generic return value */ TESTING("filter expanding chunks too much"); h5_fixname(FILENAME[10], fapl, filename, sizeof filename); if(sizeof(size_t) <= 4) { SKIPPED(); puts(" Current machine can't test for error"); } /* end if */ else { /* Register "expansion" filter */ if(H5Zregister(H5Z_EXPAND) < 0) FAIL_STACK_ERROR /* Check that the filter was registered */ if(TRUE != H5Zfilter_avail(H5Z_FILTER_EXPAND)) FAIL_STACK_ERROR /* Loop over storage allocation time */ for(alloc_time = H5D_ALLOC_TIME_EARLY; alloc_time <= H5D_ALLOC_TIME_INCR; alloc_time++) { /* Create file */ if((fid = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0) FAIL_STACK_ERROR /* Create dataset creation property list */ if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) FAIL_STACK_ERROR /* Set chunking */ chunk_dim = 10; if(H5Pset_chunk(dcpl, 1, &chunk_dim) < 0) FAIL_STACK_ERROR /* Set fill time */ if(H5Pset_fill_time(dcpl, H5D_FILL_TIME_ALLOC) < 0) FAIL_STACK_ERROR /* Set allocation time */ if(H5Pset_alloc_time(dcpl, alloc_time) < 0) FAIL_STACK_ERROR /* Set "expand" filter */ if(H5Pset_filter(dcpl, H5Z_FILTER_EXPAND, 0, (size_t)0, NULL) < 0) FAIL_STACK_ERROR /* Create scalar dataspace */ if((scalar_sid = H5Screate(H5S_SCALAR)) < 0) FAIL_STACK_ERROR /* Create 1-D dataspace */ dim = 100; max_dim = H5S_UNLIMITED; if((sid = H5Screate_simple(1, &dim, &max_dim)) < 0) FAIL_STACK_ERROR /* Create chunked dataset */ if(H5D_ALLOC_TIME_EARLY == alloc_time) { /* Make the expansion factor large enough to cause failure right away */ filter_expand_factor_g = 8; H5E_BEGIN_TRY { dsid = H5Dcreate2(fid, "dset", H5T_NATIVE_UINT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT); } H5E_END_TRY; if(dsid >= 0) FAIL_PUTS_ERROR("should fail to create dataset when allocation time is early"); } /* end if */ else { if((dsid = H5Dcreate2(fid, "dset", H5T_NATIVE_UINT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR /* Fill elements */ hs_size = 1; for(u = 0; u < 100; u++) { /* Select a single element in the dataset */ hs_offset = u; if(H5Sselect_hyperslab(sid, H5S_SELECT_SET, &hs_offset, NULL, &hs_size, NULL) < 0) FAIL_STACK_ERROR /* Read (unwritten) element from dataset */ read_elem = 1; if(H5Dread(dsid, H5T_NATIVE_UINT, scalar_sid, sid, H5P_DEFAULT, &read_elem) < 0) FAIL_STACK_ERROR /* Verify unwritten element is fill value (0) */ if(read_elem != 0) FAIL_PUTS_ERROR("invalid unwritten element read"); /* Don't expand chunks yet */ filter_expand_factor_g = 0; /* Write element to dataset */ write_elem = u; if(H5Dwrite(dsid, H5T_NATIVE_UINT, scalar_sid, sid, H5P_DEFAULT, &write_elem) < 0) FAIL_STACK_ERROR /* Read element from dataset */ read_elem = write_elem + 1; if(H5Dread(dsid, H5T_NATIVE_UINT, scalar_sid, sid, H5P_DEFAULT, &read_elem) < 0) FAIL_STACK_ERROR /* Verify written element is read in */ if(read_elem != write_elem) FAIL_PUTS_ERROR("invalid written element read"); /* Expand chunks now */ filter_expand_factor_g = 8; /* Write element to dataset */ write_elem = u; H5E_BEGIN_TRY { status = H5Dwrite(dsid, H5T_NATIVE_UINT, scalar_sid, sid, H5P_DEFAULT, &write_elem); } H5E_END_TRY; if(status >= 0) FAIL_PUTS_ERROR("should fail to write to dataset when allocation time is not early"); } /* end for */ /* Incrementally extend dataset and verify write/reads */ while(dim < 1000) { /* Extend dataset */ dim += 100; if(H5Dset_extent(dsid, &dim) < 0) FAIL_STACK_ERROR /* Close old dataspace */ if(H5Sclose(sid) < 0) FAIL_STACK_ERROR /* Get dataspace for dataset now */ if((sid = H5Dget_space(dsid)) < 0) FAIL_STACK_ERROR /* Fill new elements */ hs_size = 1; for(u = 0; u < 100; u++) { /* Select a single element in the dataset */ hs_offset = (dim + u) - 100; if(H5Sselect_hyperslab(sid, H5S_SELECT_SET, &hs_offset, NULL, &hs_size, NULL) < 0) FAIL_STACK_ERROR /* Read (unwritten) element from dataset */ read_elem = 1; if(H5Dread(dsid, H5T_NATIVE_UINT, scalar_sid, sid, H5P_DEFAULT, &read_elem) < 0) FAIL_STACK_ERROR /* Verify unwritten element is fill value (0) */ if(read_elem != 0) FAIL_PUTS_ERROR("invalid unwritten element read"); /* Don't expand chunks yet */ filter_expand_factor_g = 0; /* Write element to dataset */ write_elem = u; if(H5Dwrite(dsid, H5T_NATIVE_UINT, scalar_sid, sid, H5P_DEFAULT, &write_elem) < 0) FAIL_STACK_ERROR /* Read element from dataset */ read_elem = write_elem + 1; if(H5Dread(dsid, H5T_NATIVE_UINT, scalar_sid, sid, H5P_DEFAULT, &read_elem) < 0) FAIL_STACK_ERROR /* Verify written element is read in */ if(read_elem != write_elem) FAIL_PUTS_ERROR("invalid written element read"); /* Expand chunks now */ filter_expand_factor_g = 8; /* Write element to dataset */ write_elem = u; H5E_BEGIN_TRY { status = H5Dwrite(dsid, H5T_NATIVE_UINT, scalar_sid, sid, H5P_DEFAULT, &write_elem); } H5E_END_TRY; if(status >= 0) FAIL_PUTS_ERROR("should fail to write to dataset when allocation time is not early"); } /* end for */ } /* end while */ /* Close dataset */ if(H5Dclose(dsid) < 0) FAIL_STACK_ERROR } /* end else */ /* Close everything */ if(H5Sclose(sid) < 0) FAIL_STACK_ERROR if(H5Sclose(scalar_sid) < 0) FAIL_STACK_ERROR if(H5Pclose(dcpl) < 0) FAIL_STACK_ERROR if(H5Fclose(fid) < 0) FAIL_STACK_ERROR /* If the dataset was created, do some extra testing */ if(H5D_ALLOC_TIME_EARLY != alloc_time) { /* Re-open file & dataset */ if((fid = H5Fopen(filename, H5F_ACC_RDWR, fapl)) < 0) FAIL_STACK_ERROR /* Open dataset */ if((dsid = H5Dopen2(fid, "dset", H5P_DEFAULT)) < 0) FAIL_STACK_ERROR /* Create scalar dataspace */ if((scalar_sid = H5Screate(H5S_SCALAR)) < 0) FAIL_STACK_ERROR /* Get dataspace for dataset now */ if((sid = H5Dget_space(dsid)) < 0) FAIL_STACK_ERROR /* Read elements */ hs_size = 1; for(u = 0; u < 1000; u++) { /* Select a single element in the dataset */ hs_offset = u; if(H5Sselect_hyperslab(sid, H5S_SELECT_SET, &hs_offset, NULL, &hs_size, NULL) < 0) FAIL_STACK_ERROR /* Read element from dataset */ read_elem = u + 1; if(H5Dread(dsid, H5T_NATIVE_UINT, scalar_sid, sid, H5P_DEFAULT, &read_elem) < 0) FAIL_STACK_ERROR /* Verify unwritten element is proper value */ if(read_elem != (u % 100)) FAIL_PUTS_ERROR("invalid element read"); /* Don't expand chunks yet */ filter_expand_factor_g = 0; /* Write element to dataset */ write_elem = u % 100; if(H5Dwrite(dsid, H5T_NATIVE_UINT, scalar_sid, sid, H5P_DEFAULT, &write_elem) < 0) FAIL_STACK_ERROR /* Read element from dataset */ read_elem = write_elem + 1; if(H5Dread(dsid, H5T_NATIVE_UINT, scalar_sid, sid, H5P_DEFAULT, &read_elem) < 0) FAIL_STACK_ERROR /* Verify written element is read in */ if(read_elem != write_elem) FAIL_PUTS_ERROR("invalid written element read"); /* Expand chunks now */ filter_expand_factor_g = 8; /* Write element to dataset */ write_elem = u % 100; H5E_BEGIN_TRY { status = H5Dwrite(dsid, H5T_NATIVE_UINT, scalar_sid, sid, H5P_DEFAULT, &write_elem); } H5E_END_TRY; if(status >= 0) FAIL_PUTS_ERROR("should fail to write to dataset when allocation time is not early"); } /* end for */ /* Close everything */ if(H5Sclose(sid) < 0) FAIL_STACK_ERROR if(H5Sclose(scalar_sid) < 0) FAIL_STACK_ERROR if(H5Dclose(dsid) < 0) FAIL_STACK_ERROR if(H5Fclose(fid) < 0) FAIL_STACK_ERROR /* Re-open file */ if((fid = H5Fopen(filename, H5F_ACC_RDWR, fapl)) < 0) FAIL_STACK_ERROR /* Delete dataset */ if(H5Ldelete(fid, "dset", H5P_DEFAULT) < 0) FAIL_STACK_ERROR /* Close everything */ if(H5Fclose(fid) < 0) FAIL_STACK_ERROR } /* end if */ } /* end for */ /* Unregister "expansion" filter */ if(H5Zunregister(H5Z_FILTER_EXPAND) < 0) FAIL_STACK_ERROR /* Check that the filter was unregistered */ if(FALSE != H5Zfilter_avail(H5Z_FILTER_EXPAND)) FAIL_STACK_ERROR PASSED(); } /* end else */ return 0; error: H5E_BEGIN_TRY { H5Pclose(dcpl); H5Dclose(dsid); H5Sclose(sid); H5Sclose(scalar_sid); H5Fclose(fid); } H5E_END_TRY; return -1; } /* end test_chunk_expand() */ /*------------------------------------------------------------------------- * Function: main * * Purpose: Tests the dataset interface (H5D) * * Return: Success: exit(0) * * Failure: exit(1) * * Programmer: Robb Matzke * Tuesday, December 9, 1997 * * Modifications: * *------------------------------------------------------------------------- */ int main(void) { char filename[FILENAME_BUF_SIZE]; hid_t file, grp, fapl, fapl2; hbool_t new_format; int mdc_nelmts; size_t rdcc_nelmts; size_t rdcc_nbytes; double rdcc_w0; int nerrors = 0; const char *envval; /* Don't run this test using certain file drivers */ envval = HDgetenv("HDF5_DRIVER"); if(envval == NULL) envval = "nomatch"; /* Set the random # seed */ HDsrandom((unsigned)HDtime(NULL)); /* Testing setup */ h5_reset(); fapl = h5_fileaccess(); /* Turn off the chunk cache, so all the chunks are immediately written to disk */ if(H5Pget_cache(fapl, &mdc_nelmts, &rdcc_nelmts, &rdcc_nbytes, &rdcc_w0) < 0) goto error; rdcc_nbytes = 0; if(H5Pset_cache(fapl, mdc_nelmts, rdcc_nelmts, rdcc_nbytes, rdcc_w0) < 0) goto error; /* Copy the file access property list */ if((fapl2 = H5Pcopy(fapl)) < 0) TEST_ERROR /* Set the "use the latest version of the format" bounds for creating objects in the file */ if(H5Pset_libver_bounds(fapl2, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) TEST_ERROR h5_fixname(FILENAME[0], fapl, filename, sizeof filename); /* Test with old & new format groups */ for(new_format = FALSE; new_format <= TRUE; new_format++) { hid_t my_fapl; /* Set the FAPL for the type of format */ if(new_format) { puts("\nTesting with new file format:"); my_fapl = fapl2; } /* end if */ else { puts("Testing with old file format:"); my_fapl = fapl; } /* end else */ /* Create the file for this test */ if((file = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, my_fapl)) < 0) goto error; /* Cause the library to emit initial messages */ if((grp = H5Gcreate2(file, "emit diagnostics", H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) goto error; if(H5Oset_comment(grp, "Causes diagnostic messages to be emitted") < 0) goto error; if(H5Gclose(grp) < 0) goto error; nerrors += (test_create(file) < 0 ? 1 : 0); nerrors += (test_simple_io(envval, my_fapl) < 0 ? 1 : 0); nerrors += (test_compact_io(my_fapl) < 0 ? 1 : 0); nerrors += (test_max_compact(my_fapl) < 0 ? 1 : 0); nerrors += (test_conv_buffer(file) < 0 ? 1 : 0); nerrors += (test_tconv(file) < 0 ? 1 : 0); nerrors += (test_filters(file, my_fapl) < 0 ? 1 : 0); nerrors += (test_onebyte_shuffle(file) < 0 ? 1 : 0); nerrors += (test_nbit_int(file) < 0 ? 1 : 0); nerrors += (test_nbit_float(file) < 0 ? 1 : 0); nerrors += (test_nbit_double(file) < 0 ? 1 : 0); nerrors += (test_nbit_array(file) < 0 ? 1 : 0); nerrors += (test_nbit_compound(file) < 0 ? 1 : 0); nerrors += (test_nbit_compound_2(file) < 0 ? 1 : 0); nerrors += (test_nbit_compound_3(file) < 0 ? 1 : 0); nerrors += (test_scaleoffset_int(file) < 0 ? 1 : 0); nerrors += (test_scaleoffset_int_2(file) < 0 ? 1 : 0); nerrors += (test_scaleoffset_float(file) < 0 ? 1 : 0); nerrors += (test_scaleoffset_float_2(file) < 0 ? 1 : 0); nerrors += (test_scaleoffset_double(file) < 0 ? 1 : 0); nerrors += (test_scaleoffset_double_2(file) < 0 ? 1 : 0); nerrors += (test_multiopen (file) < 0 ? 1 : 0); nerrors += (test_types(file) < 0 ? 1 : 0); nerrors += (test_userblock_offset(envval, my_fapl) < 0 ? 1 : 0); nerrors += (test_missing_filter(file) < 0 ? 1 : 0); nerrors += (test_can_apply(file) < 0 ? 1 : 0); nerrors += (test_can_apply2(file) < 0 ? 1 : 0); nerrors += (test_set_local(my_fapl) < 0 ? 1 : 0); nerrors += (test_can_apply_szip(file) < 0 ? 1 : 0); nerrors += (test_compare_dcpl(file) < 0 ? 1 : 0); nerrors += (test_copy_dcpl(file, my_fapl) < 0 ? 1 : 0); nerrors += (test_filter_delete(file) < 0 ? 1 : 0); nerrors += (test_filters_endianess() < 0 ? 1 : 0); nerrors += (test_zero_dims(file) < 0 ? 1 : 0); nerrors += (test_missing_chunk(file) < 0 ? 1 : 0); nerrors += (test_random_chunks(my_fapl) < 0 ? 1 : 0); #ifndef H5_NO_DEPRECATED_SYMBOLS nerrors += (test_deprec(file) < 0 ? 1 : 0); #endif /* H5_NO_DEPRECATED_SYMBOLS */ nerrors += (test_huge_chunks(my_fapl) < 0 ? 1 : 0); nerrors += (test_chunk_cache(my_fapl) < 0 ? 1 : 0); nerrors += (test_big_chunks_bypass_cache(my_fapl) < 0 ? 1 : 0); nerrors += (test_chunk_expand(my_fapl) < 0 ? 1 : 0); if(H5Fclose(file) < 0) goto error; } /* end for */ /* Close 2nd FAPL */ if(H5Pclose(fapl2) < 0) TEST_ERROR if(nerrors) goto error; printf("All dataset tests passed.\n"); #ifdef H5_HAVE_FILTER_SZIP if (GetTestCleanup()) HDremove(NOENCODER_COPY_FILENAME); #endif /* H5_HAVE_FILTER_SZIP */ h5_cleanup(FILENAME, fapl); return 0; error: nerrors = MAX(1, nerrors); printf("***** %d DATASET TEST%s FAILED! *****\n", nerrors, 1 == nerrors ? "" : "S"); return 1; }