/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the COPYING file, which can be found at the root of the source code * * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. * * If you do not have access to either file, you may request a copy from * * help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Programmer: Robb Matzke * Tuesday, December 9, 1997 * * Purpose: Tests the data type interface (H5T) */ #include "h5test.h" /* Number of elements in each random test */ #define NTESTELEM 10000 /* Epsilon for floating-point comparisons */ #define FP_EPSILON 0.000001F /* * Offset from alinged memory returned by malloc(). This can be used to test * that type conversions handle non-aligned buffers correctly. */ #define ALIGNMENT 1 /* * Define if you want to test alignment code on a machine that doesn't * normally require alignment. When set, all native data types must be aligned * on a byte boundary equal to the data size. */ #define TEST_ALIGNMENT /* Alignment test stuff */ #ifdef TEST_ALIGNMENT #define H5T_FRIEND /*suppress error about including H5Tpkg */ #include "H5Tpkg.h" #endif #define SET_ALIGNMENT(TYPE,VAL) \ H5T_NATIVE_##TYPE##_ALIGN_g=MAX(H5T_NATIVE_##TYPE##_ALIGN_g, VAL) const char *FILENAME[] = { "dt_arith1", "dt_arith2", NULL }; /* * Count up or down depending on whether the machine is big endian or little * endian. If local variable `endian' is H5T_ORDER_BE then the result will * be I, otherwise the result will be Z-(I+1). */ #define ENDIAN(Z,I,E) (H5T_ORDER_BE==E?(I):(Z)-((I)+1)) typedef enum dtype_t { INT_SCHAR, INT_UCHAR, INT_SHORT, INT_USHORT, INT_INT, INT_UINT, INT_LONG, INT_ULONG, INT_LLONG, INT_ULLONG, FLT_FLOAT, FLT_DOUBLE, #if H5_SIZEOF_LONG_DOUBLE !=0 FLT_LDOUBLE, #endif OTHER } dtype_t; /* Skip overflow tests if non-zero */ static int skip_overflow_tests_g = 0; /* * Although we check whether a floating point overflow generates a SIGFPE and * turn off overflow tests in that case, it might still be possible for an * overflow condition to occur. Once a SIGFPE is raised the program cannot * be allowed to continue (cf. Posix signals) so in order to recover from a * SIGFPE we run tests that might generate one in a child process. */ #if defined(H5_HAVE_FORK) && defined(H5_HAVE_WAITPID) #define HANDLE_SIGFPE #endif /* * Decide what values of floating-point number we want to test. They are * 1 - normalized; 2 - denormalized; 3 - special. */ #define TEST_NOOP 0 #define TEST_NORMAL 1 #define TEST_DENORM 2 #define TEST_SPECIAL 3 /* Temporary buffer sizes */ #define TMP_BUF_DIM1 32 #define TMP_BUF_DIM2 100 /* Don't use hardware conversions if set */ static int without_hardware_g = 0; /* Allocates memory aligned on a certain boundary. */ #define aligned_malloc(Z) ((void*)((char*)HDmalloc(ALIGNMENT+Z)+ALIGNMENT)) #define aligned_free(M) HDfree((char*)(M)-ALIGNMENT) /* Initialize source buffer of integer for integer->integer and integer->floating-point conversion test. * This algorithm is mainly to avoid any casting and comparison between source and destination types * for compiler, because we're testing conversions. */ #define INIT_INTEGER(TYPE, SRC_MAX, SRC_MIN, SRC_SIZE, DST_SIZE, SRC_PREC, BUF, SAVED, NELMTS) \ { \ unsigned char *buf_p, *saved_p; \ unsigned int n; \ TYPE value1 = 1; \ TYPE value2 = 0; \ \ /* Allocate buffers */ \ NELMTS=SRC_PREC*3; \ BUF = (unsigned char*)aligned_malloc(NELMTS*MAX(SRC_SIZE, DST_SIZE)); \ SAVED = (unsigned char*)aligned_malloc(NELMTS*MAX(SRC_SIZE, DST_SIZE)); \ HDmemset(BUF, 0, NELMTS*MAX(SRC_SIZE, DST_SIZE)); \ HDmemset(SAVED, 0, NELMTS*MAX(SRC_SIZE, DST_SIZE)); \ \ buf_p = BUF; \ saved_p = SAVED; \ \ /*positive values, ascending order. VALUE1 starts from 00000001, to 00000010, until 10000000*/ \ /*VALUE2 ascends from 00000000, to 00000011, 00000111,..., until 11111111.*/ \ for(n=0; n=100 && SRC_MAX_10_EXP<400) { /*for double*/ \ factor = 2; \ multiply = 10000; \ } else { /*for long double*/ \ factor = 3; \ multiply = 100000000; \ } \ \ /*The number of values if multiplied by 10 for each step.*/ \ num_norm = (SRC_MAX_10_EXP - SRC_MIN_10_EXP); \ /*Reduce the number of values by 2^factor. MULTIPLY=10^(2^factor). Using this algorithm \ *instead of arithmatic operation to avoid any conversion*/ \ num_norm >>= factor; \ \ /*Total number of values*/ \ NELMTS = 2 * /*both positive and negative*/ \ (num_norm + /*number of normalized values*/ \ 1); /*maximal normalized value*/ \ \ /* Allocate buffers */ \ BUF = (unsigned char*)aligned_malloc(NELMTS*MAX(SRC_SIZE, DST_SIZE)); \ SAVED = (unsigned char*)aligned_malloc(NELMTS*MAX(SRC_SIZE, DST_SIZE)); \ HDmemset(BUF, 0, NELMTS*MAX(SRC_SIZE, DST_SIZE)); \ HDmemset(SAVED, 0, NELMTS*MAX(SRC_SIZE, DST_SIZE)); \ \ buf_p = BUF; \ saved_p = SAVED; \ \ /*Normalized values*/ \ value1 = SRC_MIN; \ value2 = -SRC_MIN; \ for(n=0; n-SRC_MAX) { /*negative*/ \ HDmemcpy(buf_p, &value2, SRC_SIZE); \ HDmemcpy(saved_p, &value2, SRC_SIZE); \ value2 *= multiply; \ buf_p += SRC_SIZE; \ saved_p += SRC_SIZE; \ } \ } \ \ value1 = SRC_MAX; /*maximal value*/ \ HDmemcpy(buf_p, &value1, SRC_SIZE); \ HDmemcpy(saved_p, &value1, SRC_SIZE); \ buf_p += SRC_SIZE; \ saved_p += SRC_SIZE; \ \ value2 = -SRC_MAX; /*negative value*/ \ HDmemcpy(buf_p, &value2, SRC_SIZE); \ HDmemcpy(saved_p, &value2, SRC_SIZE); \ buf_p += SRC_SIZE; \ saved_p += SRC_SIZE; \ } /* Allocate buffer and initialize it with floating-point denormalized values. * It's for conversion test of floating-point as the source. */ #define INIT_FP_DENORM(TYPE, SRC_MANT_DIG, SRC_SIZE, SRC_PREC, SRC_ORDR, DST_SIZE, \ BUF, SAVED, NELMTS) \ { \ unsigned char *buf_p, *saved_p; \ unsigned char *tmp1, *tmp2; \ size_t n; \ \ /*Total number of values*/ \ NELMTS = 2 * /*both positive and negative*/ \ (SRC_MANT_DIG - 1); /*number of denormalized values*/ \ \ /* Allocate buffers */ \ BUF = (unsigned char*)aligned_malloc(NELMTS*MAX(SRC_SIZE, DST_SIZE)); \ SAVED = (unsigned char*)aligned_malloc(NELMTS*MAX(SRC_SIZE, DST_SIZE)); \ HDmemset(BUF, 0, NELMTS*MAX(SRC_SIZE, DST_SIZE)); \ HDmemset(SAVED, 0, NELMTS*MAX(SRC_SIZE, DST_SIZE)); \ \ tmp1 = (unsigned char*)HDcalloc((size_t)1, (size_t)SRC_SIZE); \ tmp2 = (unsigned char*)HDcalloc((size_t)1, (size_t)SRC_SIZE); \ \ buf_p = BUF; \ saved_p = SAVED; \ \ /*Denormalized values. Exponent is 0. Let mantissa starts from 00000001, 00000011, \ *00000111,..., until 11111111.*/ \ HDmemset(tmp1, 0, SRC_SIZE); \ HDmemset(tmp2, 0, SRC_SIZE); \ H5T__bit_set (tmp2, SRC_PREC-1, (size_t)1, TRUE); /*the negative value*/ \ for(n=0; n integer conversions"); if((dxpl_id = H5Pcreate(H5P_DATASET_XFER)) < 0) { H5_FAILED(); HDprintf("Can't create data transfer property list\n"); goto error; } /* Test conversion from double (the value is SCHAR_MAX) to signed char. */ endian = H5Tget_order(H5T_NATIVE_DOUBLE); src_size1 = H5Tget_size(H5T_NATIVE_DOUBLE); dst_size1 = H5Tget_size(H5T_NATIVE_SCHAR); buf1 = (unsigned char*)HDcalloc((size_t)1, (size_t)MAX(src_size1, dst_size1)); saved_buf1 = (unsigned char*)HDcalloc((size_t)1, (size_t)MAX(src_size1, dst_size1)); HDmemcpy(buf1, &src_d, src_size1); HDmemcpy(saved_buf1, &src_d, src_size1); /* Register exception handling function and signal the destination is "signed char". */ flag = 1; if(H5Pset_type_conv_cb(dxpl_id, expt_handle, &flag) < 0) { H5_FAILED(); HDprintf("Can't register conversion callback\n"); goto error; } /* Do conversion */ if(H5Tconvert(H5T_NATIVE_DOUBLE, H5T_NATIVE_SCHAR, (size_t)1, buf1, NULL, dxpl_id) < 0) { H5_FAILED(); HDprintf("Can't convert data\n"); goto error; } HDmemcpy(&dst_c, buf1, dst_size1); /* Print errors */ if(dst_c != SCHAR_MAX) { double x = 0.; signed char y; if(0 == fails_this_test++) H5_FAILED(); HDprintf(" test double to signed char:\n"); HDprintf(" src = "); for (j=0; j set offset -> set precision -> set size. * All these properties must be set before the type can function. Other * properties can be set anytime. Derived type size cannot be expanded * bigger than original size but can be decreased. There should be no * holes among the significant bits. Exponent bias usually is set * 2^(n-1)-1, where n is the exponent size. *-----------------------------------------------------------------------*/ if(H5Tset_fields(tid1, (size_t)44, (size_t)34, (size_t)10, (size_t)3, (size_t)31) < 0) { H5_FAILED(); HDprintf("Can't set fields\n"); goto error; } if(H5Tset_offset(tid1, (size_t)3) < 0) { H5_FAILED(); HDprintf("Can't set offset\n"); goto error; } if(H5Tset_precision(tid1, (size_t)42) < 0) { H5_FAILED(); HDprintf("Can't set precision 1\n"); goto error; } if(H5Tset_size(tid1, (size_t)7) < 0) { H5_FAILED(); HDprintf("Can't set size\n"); goto error; } if(H5Tset_ebias(tid1, (size_t)511) < 0) { H5_FAILED(); HDprintf("Can't set exponent bias\n"); goto error; } if(H5Tset_pad(tid1, H5T_PAD_ZERO, H5T_PAD_ZERO) < 0) { H5_FAILED(); HDprintf("Can't set padding\n"); goto error; } if(H5Tcommit2(file, "new float type 1", tid1, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT) < 0) { H5_FAILED(); HDprintf("Can't set inpad\n"); goto error; } if(H5Tclose(tid1) < 0) { H5_FAILED(); HDprintf("Can't close datatype\n"); goto error; } if((tid1 = H5Topen2(file, "new float type 1", H5P_DEFAULT)) < 0) FAIL_PUTS_ERROR("Can't open datatype") if(H5Tget_fields(tid1, &spos, &epos, &esize, &mpos, &msize) < 0) { H5_FAILED(); HDprintf("Can't get fields\n"); goto error; } if(spos != 44 || epos != 34 || esize != 10 || mpos != 3 || msize != 31) { H5_FAILED(); HDprintf("Wrong field values\n"); goto error; } if(H5Tget_precision(tid1) != 42) { H5_FAILED(); HDprintf("Can't get precision or wrong precision\n"); goto error; } if(H5Tget_offset(tid1)!=3) { H5_FAILED(); HDprintf("Can't get offset or wrong offset\n"); goto error; } if((size = H5Tget_size(tid1))!=7) { H5_FAILED(); HDprintf("Can't get size or wrong size\n"); goto error; } if(H5Tget_ebias(tid1)!=511) { H5_FAILED(); HDprintf("Can't get exponent bias or wrong bias\n"); goto error; } /* Convert data from native integer to the 1st derived floating-point type. * Then convert data from the floating-point type back to native integer. * Compare the final data with the original data. */ src_size = H5Tget_size(H5T_NATIVE_INT); endian = H5Tget_order(H5T_NATIVE_INT); buf = (unsigned char *)HDmalloc(nelmts * (MAX(src_size, size))); saved_buf = (unsigned char *)HDmalloc(nelmts * src_size); HDmemset(buf, 0, nelmts * MAX(src_size, size)); HDmemset(saved_buf, 0, nelmts * src_size); aligned = (int *)HDcalloc((size_t)1, src_size); for(i = 0; i < nelmts * src_size; i++) buf[i] = saved_buf[i] = (unsigned char)HDrand(); /* Convert data from native integer to derived floating-point type. * The mantissa is big enough to retain the integer's precision. */ if(H5Tconvert(H5T_NATIVE_INT, tid1, nelmts, buf, NULL, dxpl_id) < 0) { H5_FAILED(); HDprintf("Can't convert data\n"); goto error; } /* Convert data from the derived floating-point type back to native integer. */ if(H5Tconvert(tid1, H5T_NATIVE_INT, nelmts, buf, NULL, dxpl_id) < 0) { H5_FAILED(); HDprintf("Can't convert data\n"); goto error; } /* Are the values still the same?*/ for(i=0; i derived floating-point conversions"); HDprintf("%-70s", str); HDfflush(stdout); H5_FAILED(); } HDprintf(" test %u elmt %u: \n", 1, (unsigned)i); HDprintf(" src = "); for (j=0; j=max_fails) { HDputs(" maximum failures reached, aborting test..."); goto error; } } fails_this_test = 0; HDfree(buf); HDfree(saved_buf); HDfree(aligned); buf = NULL; saved_buf = NULL; aligned = NULL; /*-------------------------------------------------------------------------- * 2nd floating-point type * size=3 byte, precision=24 bits, offset=0 bits, mantissa size=16 bits, * mantissa position=0, exponent size=7 bits, exponent position=16, exponent * bias=63. It can be illustrated in little-endian order as * * 2 1 0 * SEEEEEEE MMMMMMMM MMMMMMMM *--------------------------------------------------------------------------*/ if(H5Tset_fields(tid2, (size_t)23, (size_t)16, (size_t)7, (size_t)0, (size_t)16) < 0) { H5_FAILED(); HDprintf("Can't set fields\n"); goto error; } if(H5Tset_offset(tid2, (size_t)0) < 0) { H5_FAILED(); HDprintf("Can't set offset\n"); goto error; } if(H5Tset_precision(tid2, (size_t)24) < 0) { H5_FAILED(); HDprintf("Can't set precision 2\n"); goto error; } if(H5Tset_size(tid2, (size_t)3) < 0) { H5_FAILED(); HDprintf("Can't set size\n"); goto error; } if(H5Tset_ebias(tid2, (size_t)63) < 0) { H5_FAILED(); HDprintf("Can't set size\n"); goto error; } if(H5Tset_pad(tid2, H5T_PAD_ZERO, H5T_PAD_ZERO) < 0) { H5_FAILED(); HDprintf("Can't set padding\n"); goto error; } if(H5Tcommit2(file, "new float type 2", tid2, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT) < 0) { H5_FAILED(); HDprintf("Can't set inpad\n"); goto error; } if(H5Tclose(tid2) < 0) { H5_FAILED(); HDprintf("Can't close datatype\n"); goto error; } if((tid2 = H5Topen2(file, "new float type 2", H5P_DEFAULT)) < 0) FAIL_PUTS_ERROR("Can't open datatype") if(H5Tget_fields(tid2, &spos, &epos, &esize, &mpos, &msize) < 0) { H5_FAILED(); HDprintf("Can't get fields\n"); goto error; } if(spos != 23 || epos != 16 || esize != 7 || mpos != 0 || msize != 16) { H5_FAILED(); HDprintf("Wrong field values\n"); goto error; } if(H5Tget_precision(tid2) != 24) { H5_FAILED(); HDprintf("Can't get precision or wrong precision\n"); goto error; } if(H5Tget_offset(tid2)!=0) { H5_FAILED(); HDprintf("Can't get offset or wrong offset\n"); goto error; } if((size = H5Tget_size(tid2))!=3) { H5_FAILED(); HDprintf("Can't get size or wrong size\n"); goto error; } if(H5Tget_ebias(tid2)!=63) { H5_FAILED(); HDprintf("Can't get exponent bias or wrong bias\n"); goto error; } /* Convert data from the 2nd to the 1st derived floating-point type. * Then convert data from the 1st type back to the 2nd type. * Compare the final data with the original data. */ src_size = H5Tget_size(tid2); dst_size = H5Tget_size(tid1); endian = H5Tget_order(tid2); buf = (unsigned char *)HDmalloc(nelmts * (MAX(src_size, dst_size))); saved_buf = (unsigned char *)HDmalloc(nelmts * src_size); HDmemset(buf, 0, nelmts * MAX(src_size, dst_size)); HDmemset(saved_buf, 0, nelmts*src_size); for(i=0; i derived floating-point conversions"); HDprintf("%-70s", str); HDfflush(stdout); H5_FAILED(); } HDprintf(" test %u elmt %u: \n", 1, (unsigned)i); HDprintf(" src = "); for (j=0; j=max_fails) { HDputs(" maximum failures reached, aborting test..."); goto error; } } if (buf) HDfree(buf); if (saved_buf) HDfree(saved_buf); if(H5Tclose(tid1) < 0) { H5_FAILED(); HDprintf("Can't close datatype\n"); goto error; } if(H5Tclose(tid2) < 0) { H5_FAILED(); HDprintf("Can't close datatype\n"); goto error; } if(H5Pclose(dxpl_id) < 0) { H5_FAILED(); HDprintf("Can't close property list\n"); goto error; } if(H5Fclose(file) < 0) { H5_FAILED(); HDprintf("Can't close file\n"); goto error; } /* end if */ PASSED(); /* Restore the default error handler (set in h5_reset()) */ h5_restore_err(); reset_hdf5(); /*print statistics*/ return 0; error: if (buf) HDfree(buf); if (saved_buf) HDfree(saved_buf); if (aligned) HDfree(aligned); HDfflush(stdout); H5E_BEGIN_TRY { H5Tclose (tid1); H5Tclose (tid2); H5Pclose (dxpl_id); H5Fclose (file); } H5E_END_TRY; /* Restore the default error handler (set in h5_reset()) */ h5_restore_err(); reset_hdf5(); /*print statistics*/ return MAX((int)fails_this_test, 1); } /*------------------------------------------------------------------------- * Function: test_derived_integer * * Purpose: Tests user-define and query functions of integer types. * * Return: Success: 0 * * Failure: number of errors * * Programmer: Raymond Lu * Saturday, Jan 29, 2005 * * Modifications: * *------------------------------------------------------------------------- */ static int test_derived_integer(void) { hid_t file=-1, tid1=-1, tid2=-1; hid_t dxpl_id=-1; char filename[1024]; size_t src_size, dst_size; unsigned char *buf=NULL, *saved_buf=NULL; int endian; /*endianess */ size_t nelmts = NTESTELEM; unsigned int fails_this_test = 0; const size_t max_fails=40; /*max number of failures*/ char str[256]; /*message string */ unsigned int i, j; TESTING("user-define and query functions of integer types"); /* Create File */ h5_fixname(FILENAME[1], H5P_DEFAULT, filename, sizeof filename); if((file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT)) < 0) { H5_FAILED(); HDprintf("Can't create file\n"); goto error; } if((dxpl_id = H5Pcreate(H5P_DATASET_XFER)) < 0) { H5_FAILED(); HDprintf("Can't create data transfer property list\n"); goto error; } if((tid1 = H5Tcopy(H5T_STD_I32LE)) < 0) { H5_FAILED(); HDprintf("Can't copy data type\n"); goto error; } if((tid2 = H5Tcopy(H5T_STD_U64LE)) < 0) { H5_FAILED(); HDprintf("Can't copy data type\n"); goto error; } /*-------------------------------------------------------------------------- * 1st integer type * size=3 byte, precision=24 bits, offset=0 bits, order=big endian. * It can be illustrated in big-endian order as * * 0 1 2 * SIIIIIII IIIIIIII IIIIIIII * * There's no specific order for these functions to define the attributes * of a new integer type, H5Tset_precision, H5Tset_offset, H5Tset_size, * H5Tset_order, H5Tset_pad, H5Tset_sign. *--------------------------------------------------------------------------*/ if(H5Tset_offset(tid1, (size_t)0) < 0) { H5_FAILED(); HDprintf("Can't set offset\n"); goto error; } if(H5Tset_size(tid1, (size_t)3) < 0) { H5_FAILED(); HDprintf("Can't set size\n"); goto error; } if(H5Tset_precision(tid1, (size_t)24) < 0) { H5_FAILED(); HDprintf("Can't set precision\n"); goto error; } if(H5Tset_order(tid1, H5T_ORDER_BE) < 0) { H5_FAILED(); HDprintf("Can't set order\n"); goto error; } if(H5Tcommit2(file, "new integer type 1", tid1, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT) < 0) { H5_FAILED(); HDprintf("Can't commit data type\n"); goto error; } if(H5Tclose(tid1) < 0) { H5_FAILED(); HDprintf("Can't close datatype\n"); goto error; } if((tid1 = H5Topen2(file, "new integer type 1", H5P_DEFAULT)) < 0) FAIL_PUTS_ERROR("Can't open datatype") if(H5Tget_precision(tid1) != 24) { H5_FAILED(); HDprintf("Can't get precision or wrong precision\n"); goto error; } if(H5Tget_offset(tid1) != 0) { H5_FAILED(); HDprintf("Can't get offset or wrong offset\n"); goto error; } if(H5Tget_size(tid1) != 3) { H5_FAILED(); HDprintf("Can't get size or wrong size\n"); goto error; } if(H5Tget_order(tid1)!=H5T_ORDER_BE) { H5_FAILED(); HDprintf("Can't get order or wrong order\n"); goto error; } /*-------------------------------------------------------------------------- * 2nd integer type * size=8 byte, precision=48 bits, offset=10 bits, order=little endian. * It can be illustrated in little-endian order as * * 7 6 5 4 3 2 1 0 * ??????SI IIIIIIII IIIIIIII IIIIIIII IIIIIIII IIIIIIII IIIIII?? ???????? *--------------------------------------------------------------------------*/ if(H5Tset_precision(tid2, (size_t)48) < 0) { H5_FAILED(); HDprintf("Can't set precision\n"); goto error; } if(H5Tset_offset(tid2, (size_t)10) < 0) { H5_FAILED(); HDprintf("Can't set offset\n"); goto error; } if(H5Tset_sign(tid2, H5T_SGN_2) < 0) { H5_FAILED(); HDprintf("Can't set offset\n"); goto error; } if(H5Tcommit2(file, "new integer type 2", tid2, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT) < 0) { H5_FAILED(); HDprintf("Can't commit data type\n"); goto error; } if(H5Tclose(tid2) < 0) { H5_FAILED(); HDprintf("Can't close datatype\n"); goto error; } if((tid2 = H5Topen2(file, "new integer type 2", H5P_DEFAULT)) < 0) FAIL_PUTS_ERROR("Can't open datatype") if(H5Tget_precision(tid2) != 48) { H5_FAILED(); HDprintf("Can't get precision or wrong precision\n"); goto error; } if(H5Tget_offset(tid2) != 10) { H5_FAILED(); HDprintf("Can't get offset or wrong offset\n"); goto error; } if(H5Tget_size(tid2) != 8) { H5_FAILED(); HDprintf("Can't get size or wrong size\n"); goto error; } if(H5Tget_sign(tid2)!=H5T_SGN_2) { H5_FAILED(); HDprintf("Can't get sign or wrong sign\n"); goto error; } /* Convert data from the 1st to the 2nd derived integer type. * Then convert data from the 2nd type back to the 1st type. * Compare the final data with the original data. */ src_size = H5Tget_size(tid1); dst_size = H5Tget_size(tid2); endian = H5Tget_order(tid1); buf = (unsigned char *)HDmalloc(nelmts*(MAX(src_size, dst_size))); saved_buf = (unsigned char *)HDmalloc(nelmts*src_size); HDmemset(buf, 0, nelmts * MAX(src_size, dst_size)); HDmemset(saved_buf, 0, nelmts*src_size); for(i=0; i derived integer conversions"); HDprintf("%-70s", str); HDfflush(stdout); H5_FAILED(); } HDprintf(" test %u elmt %u: \n", 1, (unsigned)i); HDprintf(" src = "); for (j=0; j=max_fails) { HDputs(" maximum failures reached, aborting test..."); goto error; } } if(H5Tclose(tid1) < 0) { H5_FAILED(); HDprintf("Can't close datatype\n"); goto error; } if(H5Tclose(tid2) < 0) { H5_FAILED(); HDprintf("Can't close datatype\n"); goto error; } if(H5Pclose(dxpl_id) < 0) { H5_FAILED(); HDprintf("Can't close property list\n"); goto error; } if(H5Fclose(file) < 0) { H5_FAILED(); HDprintf("Can't close file\n"); goto error; } /* end if */ HDfree(buf); HDfree(saved_buf); PASSED(); /* Restore the default error handler (set in h5_reset()) */ h5_restore_err(); reset_hdf5(); /*print statistics*/ return 0; error: if (buf) HDfree(buf); if (saved_buf) HDfree(saved_buf); HDfflush(stdout); H5E_BEGIN_TRY { H5Tclose (tid1); H5Tclose (tid2); H5Pclose (dxpl_id); H5Fclose (file); } H5E_END_TRY; /* Restore the default error handler (set in h5_reset()) */ h5_restore_err(); reset_hdf5(); /*print statistics*/ return MAX((int)fails_this_test, 1); } /*------------------------------------------------------------------------- * Function: test_conv_int_1 * * Purpose: Test conversion of integer values from SRC to DST. * These types should be any combination of: * * H5T_NATIVE_SCHAR H5T_NATIVE_UCHAR * H5T_NATIVE_SHORT H5T_NATIVE_USHORT * H5T_NATIVE_INT H5T_NATIVE_UINT * H5T_NATIVE_LONG H5T_NATIVE_ULONG * H5T_NATIVE_LLONG H5T_NATIVE_ULLONG * * Return: Success: 0 * * Failure: number of errors * * Programmer: Robb Matzke * Monday, November 16, 1998 * * Modifications: * *------------------------------------------------------------------------- */ static int test_conv_int_1(const char *name, hid_t src, hid_t dst) { size_t nelmts=0; /*num values per test */ const size_t max_fails=8; /*max number of failures*/ size_t fails_all_tests=0; /*number of failures */ size_t fails_this_test; /*fails for this test */ char str[256]; /*hello string */ dtype_t src_type, dst_type; /*data types */ const char *src_type_name=NULL; /*source type name */ const char *dst_type_name=NULL; /*destination type name */ int endian; /*machine endianess */ size_t src_size, dst_size; /*type sizes */ unsigned char *buf=NULL; /*buffer for conversion */ unsigned char *saved=NULL; /*original values */ size_t j, k; /*counters */ unsigned char *hw=NULL; /*hardware conv result */ unsigned char src_bits[32]; /*src value in LE order */ unsigned char dst_bits[32]; /*dest value in LE order*/ size_t src_nbits; /*source length in bits */ size_t dst_nbits; /*dst length in bits */ H5T_sign_t src_sign; /*source sign type */ H5T_sign_t dst_sign; /*dst sign type */ void *aligned=NULL; /*aligned temp buffer */ signed char hw_char; unsigned char hw_uchar; short hw_short; unsigned short hw_ushort; int hw_int; unsigned hw_uint; long hw_long; unsigned long hw_ulong; long long hw_llong; unsigned long long hw_ullong; /* What are the names of the source and destination types */ if (H5Tequal(src, H5T_NATIVE_SCHAR)) { src_type_name = "signed char"; src_type = INT_SCHAR; } else if (H5Tequal(src, H5T_NATIVE_UCHAR)) { src_type_name = "unsigned char"; src_type = INT_UCHAR; } else if (H5Tequal(src, H5T_NATIVE_SHORT)) { src_type_name = "short"; src_type = INT_SHORT; } else if (H5Tequal(src, H5T_NATIVE_USHORT)) { src_type_name = "unsigned short"; src_type = INT_USHORT; } else if (H5Tequal(src, H5T_NATIVE_INT)) { src_type_name = "int"; src_type = INT_INT; } else if (H5Tequal(src, H5T_NATIVE_UINT)) { src_type_name = "unsigned int"; src_type = INT_UINT; } else if (H5Tequal(src, H5T_NATIVE_LONG)) { src_type_name = "long"; src_type = INT_LONG; } else if (H5Tequal(src, H5T_NATIVE_ULONG)) { src_type_name = "unsigned long"; src_type = INT_ULONG; } else if (H5Tequal(src, H5T_NATIVE_LLONG)) { src_type_name = "long long"; src_type = INT_LLONG; } else if (H5Tequal(src, H5T_NATIVE_ULLONG)) { src_type_name = "unsigned long long"; src_type = INT_ULLONG; } else { src_type_name = "UNKNOWN"; src_type = OTHER; } if (H5Tequal(dst, H5T_NATIVE_SCHAR)) { dst_type_name = "signed char"; dst_type = INT_SCHAR; } else if (H5Tequal(dst, H5T_NATIVE_UCHAR)) { dst_type_name = "unsigned char"; dst_type = INT_UCHAR; } else if (H5Tequal(dst, H5T_NATIVE_SHORT)) { dst_type_name = "short"; dst_type = INT_SHORT; } else if (H5Tequal(dst, H5T_NATIVE_USHORT)) { dst_type_name = "unsigned short"; dst_type = INT_USHORT; } else if (H5Tequal(dst, H5T_NATIVE_INT)) { dst_type_name = "int"; dst_type = INT_INT; } else if (H5Tequal(dst, H5T_NATIVE_UINT)) { dst_type_name = "unsigned int"; dst_type = INT_UINT; } else if (H5Tequal(dst, H5T_NATIVE_LONG)) { dst_type_name = "long"; dst_type = INT_LONG; } else if (H5Tequal(dst, H5T_NATIVE_ULONG)) { dst_type_name = "unsigned long"; dst_type = INT_ULONG; } else if (H5Tequal(dst, H5T_NATIVE_LLONG)) { dst_type_name = "long long"; dst_type = INT_LLONG; } else if (H5Tequal(dst, H5T_NATIVE_ULLONG)) { dst_type_name = "unsigned long long"; dst_type = INT_ULLONG; } else { dst_type_name = "UNKNOWN"; dst_type = OTHER; } /* Sanity checks */ if (OTHER==src_type || OTHER==dst_type) { HDsnprintf(str, sizeof(str), "Testing %s %s -> %s conversions", name, src_type_name, dst_type_name); HDprintf("%-70s", str); H5_FAILED(); HDputs(" Unknown data type."); goto error; } else { HDsnprintf(str, sizeof(str), "Testing %s %s -> %s conversions", name, src_type_name, dst_type_name); HDprintf("%-70s", str); HDfflush(stdout); fails_this_test=0; } /* Some information about datatypes */ endian = H5Tget_order(H5T_NATIVE_INT); src_size = H5Tget_size(src); dst_size = H5Tget_size(dst); src_nbits = H5Tget_precision(src); /* not 8*src_size, esp on J90 - QAK */ dst_nbits = H5Tget_precision(dst); /* not 8*dst_size, esp on J90 - QAK */ src_sign = H5Tget_sign(src); dst_sign = H5Tget_sign(dst); aligned = HDcalloc((size_t)1, sizeof(long long)); /* Allocate and initialize the source buffer through macro INIT_INTEGER. The BUF * will be used for the conversion while the SAVED buffer will be * used for the comparison later. */ if(src_type == INT_SCHAR) { INIT_INTEGER(signed char, SCHAR_MAX, SCHAR_MIN, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_UCHAR) { INIT_INTEGER(unsigned char, UCHAR_MAX, 0, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_SHORT) { INIT_INTEGER(short, SHRT_MAX, SHRT_MIN, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_USHORT) { INIT_INTEGER(unsigned short, USHRT_MAX, 0, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_INT) { INIT_INTEGER(int, INT_MAX, INT_MIN, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_UINT) { INIT_INTEGER(unsigned int, UINT_MAX, 0, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_LONG) { INIT_INTEGER(long, LONG_MAX, LONG_MIN, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_ULONG) { INIT_INTEGER(unsigned long, ULONG_MAX, 0, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_LLONG) { INIT_INTEGER(long long, LLONG_MAX, LLONG_MIN, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_ULLONG) { INIT_INTEGER(unsigned long long, ULLONG_MAX, 0, src_size, dst_size, src_nbits, buf, saved, nelmts); } else goto error; /* Perform the conversion */ if (H5Tconvert(src, dst, nelmts, buf, NULL, H5P_DEFAULT) < 0) goto error; /* Check the results from the library against hardware */ for (j=0; jdst_nbits) { if(0==H5T__bit_get_d(src_bits, src_nbits-1, (size_t)1) && H5T__bit_find(src_bits, dst_nbits-1, (src_nbits-dst_nbits), H5T_BIT_MSB, 1)>=0) { /* * Source is positive and the magnitude is too large for * the destination. The destination should be set to the * maximum possible value: 0x7f...f */ if (0==H5T__bit_get_d(dst_bits, dst_nbits-1, (size_t)1) && H5T__bit_find(dst_bits, (size_t)0, dst_nbits-1, H5T_BIT_LSB, 0) < 0) continue; /*no error*/ } else if (1==H5T__bit_get_d(src_bits, src_nbits-1, (size_t)1) && H5T__bit_find(src_bits, (size_t)0, src_nbits-1, H5T_BIT_MSB, 0)+1>=(ssize_t)dst_nbits) { /* * Source is negative but the magnitude is too large for * the destination. The destination should be set to the * smallest possible value: 0x80...0 */ if (1==H5T__bit_get_d(dst_bits, dst_nbits-1, (size_t)1) && H5T__bit_find(dst_bits, (size_t)0, dst_nbits-1, H5T_BIT_LSB, 1) < 0) continue; /*no error*/ } } else if(src_nbitsdst_nbits && H5T__bit_find(src_bits, dst_nbits-1, src_nbits-dst_nbits, H5T_BIT_LSB, 1)>=0) { /* * The source is a value with a magnitude too large for * the destination. The destination should be the * largest possible value: 0xff...f */ if (H5T__bit_find(dst_bits, (size_t)0, dst_nbits, H5T_BIT_LSB, 0) < 0) continue; /*no error*/ } } else if (H5T_SGN_NONE==src_sign && H5T_SGN_2==dst_sign) { if (src_nbits>=dst_nbits && H5T__bit_find(src_bits, dst_nbits-1, (src_nbits-dst_nbits)+1, H5T_BIT_LSB, 1)>=0) { /* * The source value has a magnitude that is larger than * the destination can handle. The destination should be * set to the largest possible positive value: 0x7f...f */ if (0==H5T__bit_get_d(dst_bits, dst_nbits-1, (size_t)1) && H5T__bit_find(dst_bits, (size_t)0, dst_nbits-1, H5T_BIT_LSB, 0) < 0) continue; /*no error*/ } } else { if (src_nbits>dst_nbits && H5T__bit_find(src_bits, dst_nbits, src_nbits-dst_nbits, H5T_BIT_LSB, 1)>=0) { /* * The unsigned source has a value which is too large for * the unsigned destination. The destination should be * set to the largest possible value: 0xff...f */ if (H5T__bit_find(dst_bits, (size_t)0, dst_nbits, H5T_BIT_LSB, 0) < 0) continue; /*no error*/ } } /* Print errors */ if (0==fails_this_test++) H5_FAILED(); HDprintf(" elmt %u\n", (unsigned)j); HDprintf(" src = "); for (k=0; k=max_fails) { HDputs(" maximum failures reached, aborting test..."); HDputs(" (dst is library's conversion output. ans is compiler's conversion output.)"); goto done; } } PASSED(); done: if (buf) aligned_free(buf); if (saved) aligned_free(saved); if (aligned) HDfree(aligned); HDfflush(stdout); /* Restore the default error handler (set in h5_reset()) */ h5_restore_err(); reset_hdf5(); /*print statistics*/ return (int)fails_all_tests; error: if (buf) aligned_free(buf); if (saved) aligned_free(saved); if (aligned) HDfree(aligned); HDfflush(stdout); /* Restore the default error handler (set in h5_reset()) */ h5_restore_err(); reset_hdf5(); /*print statistics*/ return MAX((int)fails_all_tests, 1); } /*------------------------------------------------------------------------- * Function: test_conv_int_2 * * Purpose: Tests overlap calculates in H5T__conv_i_i(), which should be * the same as for H5T__conv_f_f() and H5T__conv_s_s(). * * Return: Success: 0 * * Failure: number of errors * * Programmer: Robb Matzke * Friday, April 30, 1999 * * Modifications: * *------------------------------------------------------------------------- */ static int test_conv_int_2(void) { int i, j; hid_t src_type, dst_type; char *buf; HDprintf("%-70s", "Testing overlap calculations"); HDfflush(stdout); buf = (char *)HDcalloc(TMP_BUF_DIM1, TMP_BUF_DIM2); HDassert(buf); for(i = 1; i <= TMP_BUF_DIM1; i++) { for(j = 1; j <= TMP_BUF_DIM1; j++) { /* Source type */ src_type = H5Tcopy(H5T_NATIVE_CHAR); H5Tset_size(src_type, (size_t)i); /* Destination type */ dst_type = H5Tcopy(H5T_NATIVE_CHAR); H5Tset_size(dst_type, (size_t)j); /* * Conversion. If overlap calculations aren't right then an * assertion will fail in H5T__conv_i_i() */ H5Tconvert(src_type, dst_type, (size_t)TMP_BUF_DIM2, buf, NULL, H5P_DEFAULT); H5Tclose(src_type); H5Tclose(dst_type); } } PASSED(); HDfree(buf); return 0; } /*------------------------------------------------------------------------- * Function: my_isnan * * Purpose: Determines whether VAL points to NaN. * * Return: TRUE or FALSE * * Programmer: Robb Matzke * Monday, July 6, 1998 * * Modifications: * *------------------------------------------------------------------------- */ static int my_isnan(dtype_t type, void *val) { int retval = 0; char s[256]; if (FLT_FLOAT==type) { float x = 0.; HDmemcpy(&x, val, sizeof(float)); retval = (x!=x); } else if (FLT_DOUBLE==type) { double x = 0.; HDmemcpy(&x, val, sizeof(double)); retval = (x!=x); #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE && H5_SIZEOF_LONG_DOUBLE!=0 } else if (FLT_LDOUBLE==type) { long double x = 0.; HDmemcpy(&x, val, sizeof(long double)); retval = (x!=x); #endif } else { return 0; } /* * Sometimes NaN==NaN (e.g., DEC Alpha) so we try to print it and see if * the result contains a NaN string. */ if (!retval) { if (FLT_FLOAT==type) { float x = 0.; HDmemcpy(&x, val, sizeof(float)); HDsnprintf(s, sizeof(s), "%g", (double)x); } else if (FLT_DOUBLE==type) { double x = 0.; HDmemcpy(&x, val, sizeof(double)); HDsnprintf(s, sizeof(s), "%g", x); #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE && H5_SIZEOF_LONG_DOUBLE!=0 } else if (FLT_LDOUBLE==type) { long double x = 0.; HDmemcpy(&x, val, sizeof(long double)); HDsnprintf(s, sizeof(s), "%Lg", x); #endif } else { return 0; } if (HDstrstr(s, "NaN") || HDstrstr(s, "NAN") || HDstrstr(s, "nan")) retval = 1; } return retval; } /*------------------------------------------------------------------------- * Function: my_isinf * * Purpose: Determines whether VAL points to +/-infinity. * * Return: TRUE or FALSE * * Programmer: Raymond Lu * Monday, June 20, 2005 * * Modifications: * *------------------------------------------------------------------------- */ static int my_isinf(int endian, unsigned char *val, size_t size, size_t mpos, size_t msize, size_t epos, size_t esize) { unsigned char *bits; int retval = 0; size_t i; bits = (unsigned char*)HDcalloc((size_t)1, size); for (i=0; i0) { while (child_pid!=waitpid(child_pid, &status, 0)) /*void*/; if (WIFEXITED(status) && 255==WEXITSTATUS(status)) { return 0; /*child exit after catching SIGFPE*/ } else if (WIFEXITED(status)) { return WEXITSTATUS(status); } else if (WIFSIGNALED(status)) { HDsnprintf(str, sizeof(str), " Child caught signal %d.", WTERMSIG(status)); HDputs(str); return 1; /*child exit after catching non-SIGFPE signal */ } else { HDputs(" Child didn't exit normally."); return 1; } } #endif /* * The remainder of this function is executed only by the child if * HANDLE_SIGFPE is defined. */ HDsignal(SIGFPE,fpe_handler); /* What are the names of the source and destination types */ if (H5Tequal(src, H5T_NATIVE_FLOAT)) { src_type_name = "float"; src_type = FLT_FLOAT; } else if (H5Tequal(src, H5T_NATIVE_DOUBLE)) { src_type_name = "double"; src_type = FLT_DOUBLE; #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE && H5_SIZEOF_LONG_DOUBLE!=0 } else if (H5Tequal(src, H5T_NATIVE_LDOUBLE)) { src_type_name = "long double"; src_type = FLT_LDOUBLE; #endif } else { src_type_name = "UNKNOWN"; src_type = OTHER; } if (H5Tequal(dst, H5T_NATIVE_FLOAT)) { dst_type_name = "float"; dst_type = FLT_FLOAT; } else if (H5Tequal(dst, H5T_NATIVE_DOUBLE)) { dst_type_name = "double"; dst_type = FLT_DOUBLE; #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE && H5_SIZEOF_LONG_DOUBLE!=0 } else if (H5Tequal(dst, H5T_NATIVE_LDOUBLE)) { dst_type_name = "long double"; dst_type = FLT_LDOUBLE; #endif } else { dst_type_name = "UNKNOWN"; dst_type = OTHER; } /* Sanity checks */ if(sizeof(float)==sizeof(double)) HDputs("Sizeof(float)==sizeof(double) - some tests may not be sensible."); if (OTHER==src_type || OTHER==dst_type) { if(!strcmp(name, "noop")) HDsnprintf(str, sizeof(str), "Testing %s %s -> %s conversions", name, src_type_name, dst_type_name); else if(run_test==TEST_SPECIAL) HDsnprintf(str, sizeof(str), "Testing %s special %s -> %s conversions", name, src_type_name, dst_type_name); else if(run_test==TEST_NORMAL) HDsnprintf(str, sizeof(str), "Testing %s normalized %s -> %s conversions", name, src_type_name, dst_type_name); else if(run_test==TEST_DENORM) HDsnprintf(str, sizeof(str), "Testing %s denormalized %s -> %s conversions", name, src_type_name, dst_type_name); HDprintf("%-70s", str); H5_FAILED(); HDputs(" Unknown data type."); goto error; } else { if(!strcmp(name, "noop")) HDsnprintf(str, sizeof(str), "Testing %s %s -> %s conversions", name, src_type_name, dst_type_name); else if(run_test==TEST_SPECIAL) HDsnprintf(str, sizeof(str), "Testing %s special %s -> %s conversions", name, src_type_name, dst_type_name); else if(run_test==TEST_NORMAL) HDsnprintf(str, sizeof(str), "Testing %s normalized %s -> %s conversions", name, src_type_name, dst_type_name); else if(run_test==TEST_DENORM) HDsnprintf(str, sizeof(str), "Testing %s denormalized %s -> %s conversions", name, src_type_name, dst_type_name); HDprintf("%-70s", str); HDfflush(stdout); fails_this_test = 0; } /* Get "interesting" values */ src_size = H5Tget_size(src); dst_size = H5Tget_size(dst); src_nbits = H5Tget_precision(src); /* not 8*src_size, esp on J90 - QAK */ dst_nbits = H5Tget_precision(dst); /* not 8*dst_size, esp on J90 - QAK */ dst_ebias=H5Tget_ebias(dst); H5Tget_fields(src,NULL,&src_epos,&src_esize,NULL,NULL); H5Tget_fields(dst,NULL,&dst_epos,&dst_esize,&dst_mpos,&dst_msize); sendian = H5Tget_order(src); dendian = H5Tget_order(dst); /* Allocate buffers */ aligned = HDcalloc((size_t)1, MAX(sizeof(long double), sizeof(double))); /* Allocate and initialize the source buffer through macro INIT_FP_NORM or INIT_FP_SPECIAL. * The BUF will be used for the conversion while the SAVED buffer will be used for * the comparison later. INIT_FP_NORM will fill in the buffer with regular values like * normalized and denormalized values; INIT_FP_SPECIAL will fill with special values * like infinity, NaN. */ switch (run_test) { case TEST_NOOP: case TEST_NORMAL: if(src_type == FLT_FLOAT) { INIT_FP_NORM(float, FLT_MAX, FLT_MIN, FLT_MAX_10_EXP, FLT_MIN_10_EXP, src_size, dst_size, buf, saved, nelmts); } else if(src_type == FLT_DOUBLE) { INIT_FP_NORM(double, DBL_MAX, DBL_MIN, DBL_MAX_10_EXP, DBL_MIN_10_EXP, src_size, dst_size, buf, saved, nelmts); #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE && H5_SIZEOF_LONG_DOUBLE!=0 } else if(src_type == FLT_LDOUBLE) { INIT_FP_NORM(long double, LDBL_MAX, LDBL_MIN, LDBL_MAX_10_EXP, LDBL_MIN_10_EXP, src_size, dst_size, buf, saved, nelmts); #endif } else goto error; break; case TEST_DENORM: if(src_type == FLT_FLOAT) { INIT_FP_DENORM(float, FLT_MANT_DIG, src_size, src_nbits, sendian, dst_size, buf, saved, nelmts); } else if(src_type == FLT_DOUBLE) { INIT_FP_DENORM(double, DBL_MANT_DIG, src_size, src_nbits, sendian, dst_size, buf, saved, nelmts); #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE && H5_SIZEOF_LONG_DOUBLE!=0 } else if(src_type == FLT_LDOUBLE) { INIT_FP_DENORM(long double, LDBL_MANT_DIG, src_size, src_nbits, sendian, dst_size, buf, saved, nelmts); #endif } else goto error; break; case TEST_SPECIAL: if(src_type == FLT_FLOAT) { INIT_FP_SPECIAL(src_size, src_nbits, sendian, FLT_MANT_DIG, dst_size, buf, saved, nelmts); } else if(src_type == FLT_DOUBLE) { INIT_FP_SPECIAL(src_size, src_nbits, sendian, DBL_MANT_DIG, dst_size, buf, saved, nelmts); #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE && H5_SIZEOF_LONG_DOUBLE!=0 } else if(src_type == FLT_LDOUBLE) { INIT_FP_SPECIAL(src_size, src_nbits, sendian, LDBL_MANT_DIG, dst_size, buf, saved, nelmts); #endif } else goto error; break; default: goto error; } /* Perform the conversion in software */ if (H5Tconvert(src, dst, nelmts, buf, NULL, H5P_DEFAULT) < 0) goto error; /* Check the software results against the hardware */ for (j=0; j (double)FLT_MAX; } else if (FLT_DOUBLE==dst_type) { hw_d = *((double*)aligned); hw = (unsigned char*)&hw_d; #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE } else { hw_ld = *((double*)aligned); hw = (unsigned char*)&hw_ld; #endif } #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE } else { HDmemcpy(aligned, saved+j*sizeof(long double), sizeof(long double)); if (FLT_FLOAT==dst_type) { hw_f = (float)*((long double*)aligned); hw = (unsigned char*)&hw_f; underflow = HDfabsl(*((long double*)aligned)) < FLT_MIN; overflow = HDfabsl(*((long double*)aligned)) > FLT_MAX; } else if (FLT_DOUBLE==dst_type) { hw_d = (double)*((long double*)aligned); hw = (unsigned char*)&hw_d; underflow = HDfabsl(*((long double*)aligned)) < DBL_MIN; overflow = HDfabsl(*((long double*)aligned)) > DBL_MAX; } else { hw_ld = *((long double*)aligned); hw = (unsigned char*)&hw_ld; } #endif } if (underflow){ uflow++; } /* For Intel machines, the size of "long double" is 12 bytes, precision * is 80 bits; for Intel IA64 and AMD processors, the size of "long double" * is 16 bytes, precision is 80 bits. During hardware conversion, the * last few unused bytes may have garbage in them. Clean them out with * 0s before compare the values. */ #if H5_SIZEOF_LONG_DOUBLE !=0 if(sendian == H5T_ORDER_LE && dst_type == FLT_LDOUBLE) { size_t q; for(q = dst_nbits / 8; q < dst_size; q++) { buf[j * dst_size + q] = 0x00; hw[q] = 0x00; } } #endif /* Are the two results the same? */ for (k=(dst_size-(dst_nbits/8)); k=max_fails) { if(run_test==TEST_NORMAL) HDputs(" maximum failures reached, aborting test..."); else if(run_test==TEST_DENORM || run_test==TEST_SPECIAL) HDputs(" maximum warnings reached, aborting test..."); HDputs(" (dst is library's conversion output. ans is compiler's conversion output.)"); goto done; } } if(!fails_all_tests) PASSED(); done: if (buf) aligned_free(buf); if (saved) aligned_free(saved); if (aligned) HDfree(aligned); HDfflush(stdout); #ifdef HANDLE_SIGFPE if(run_test==TEST_NOOP || run_test==TEST_NORMAL) HDexit(MIN((int)fails_all_tests, 254)); else if(run_test==TEST_DENORM || run_test==TEST_SPECIAL) HDexit(EXIT_SUCCESS); HDassert(0 && "Should not reach this point!"); return 1; #else /* Restore the default error handler (set in h5_reset()) */ h5_restore_err(); reset_hdf5(); /* If the source is normalized values, treat the failures as error; * if it is denormalized or special values, treat the failure as warning.*/ if(run_test==TEST_NOOP || run_test==TEST_NORMAL) return (int)fails_all_tests; else if(run_test==TEST_DENORM || run_test==TEST_SPECIAL) return 0; #endif error: if (buf) aligned_free(buf); if (saved) aligned_free(saved); if (aligned) HDfree(aligned); HDfflush(stdout); #ifdef HANDLE_SIGFPE if(run_test==TEST_NOOP || run_test==TEST_NORMAL) HDexit(MIN(MAX((int)fails_all_tests, 1), 254)); else if(run_test==TEST_DENORM || run_test==TEST_SPECIAL) HDexit(EXIT_FAILURE); HDassert(0 && "Should not reach this point!"); return 1; #else /* Restore the default error handler (set in h5_reset()) */ h5_restore_err(); reset_hdf5(); if(run_test==TEST_NOOP || run_test==TEST_NORMAL) return MAX((int)fails_all_tests, 1); else if(run_test==TEST_DENORM || run_test==TEST_SPECIAL) return 1; #endif } /*------------------------------------------------------------------------- * Function: test_conv_int_fp * * Purpose: Test conversion between integer and float values * from SRC to DST. These types should be any combination of: * * H5T_NATIVE_SCHAR H5T_NATIVE_FLOAT * H5T_NATIVE_SHORT H5T_NATIVE_DOUBLE * H5T_NATIVE_INT H5T_NATIVE_LDOUBLE * H5T_NATIVE_LONG * H5T_NATIVE_LLONG * * Return: Success: 0 * * Failure: number of errors * * Programmer: Raymond Lu * Thursday, November 6, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static int test_conv_int_fp(const char *name, int run_test, hid_t src, hid_t dst) { hid_t dxpl_id; /*dataset transfer property list*/ int fill_value=9; /*fill value for conversion exception*/ H5T_conv_except_func_t op; /*returned callback function for conversion exception*/ void *user_data; /*returned pointer to user data passed in to the callback*/ hbool_t except_set = FALSE; /*whether user's exception handling is set*/ size_t nelmts=0; /*num values per test */ const size_t max_fails=40; /*max number of failures*/ size_t fails_all_tests=0; /*number of failures */ size_t fails_this_test; /*fails for this test */ char str[256]; /*hello string */ dtype_t src_type; /*data types */ dtype_t dst_type; /*data types */ const char *src_type_name=NULL; /*source type name */ const char *dst_type_name=NULL; /*destination type name */ int sendian; /*source endianess */ int dendian; /*destination endianess */ size_t src_size, dst_size; /*type sizes */ unsigned char *buf=NULL; /*buffer for conversion */ unsigned char *saved=NULL; /*original values */ size_t j, k; /*counters */ unsigned char *hw=NULL; /*hardware conv result */ unsigned char src_bits[32]; /*src value in LE order */ unsigned char dst_bits[32]; /*dest value in LE order*/ size_t src_nbits; /*source length in bits */ size_t dst_nbits; /*dst length in bits */ void *aligned=NULL; /*aligned temp buffer */ float hw_float=0; double hw_double=0; long double hw_ldouble=0; signed char hw_schar=0; unsigned char hw_uchar=0; short hw_short=0; unsigned short hw_ushort=0; int hw_int=0; unsigned hw_uint=0; long hw_long=0; unsigned long hw_ulong=0; long long hw_llong=0; unsigned long long hw_ullong=0; /* What is the name of the source type */ if (H5Tequal(src, H5T_NATIVE_SCHAR)) { src_type_name = "signed char"; src_type = INT_SCHAR; } else if (H5Tequal(src, H5T_NATIVE_UCHAR)) { src_type_name = "unsigned char"; src_type = INT_UCHAR; } else if (H5Tequal(src, H5T_NATIVE_SHORT)) { src_type_name = "short"; src_type = INT_SHORT; } else if (H5Tequal(src, H5T_NATIVE_USHORT)) { src_type_name = "unsigned short"; src_type = INT_USHORT; } else if (H5Tequal(src, H5T_NATIVE_INT)) { src_type_name = "int"; src_type = INT_INT; } else if (H5Tequal(src, H5T_NATIVE_UINT)) { src_type_name = "unsigned int"; src_type = INT_UINT; } else if (H5Tequal(src, H5T_NATIVE_LONG)) { src_type_name = "long"; src_type = INT_LONG; } else if (H5Tequal(src, H5T_NATIVE_ULONG)) { src_type_name = "unsigned long"; src_type = INT_ULONG; } else if (H5Tequal(src, H5T_NATIVE_LLONG)) { src_type_name = "long long"; src_type = INT_LLONG; } else if (H5Tequal(src, H5T_NATIVE_ULLONG)) { src_type_name = "unsigned long long"; src_type = INT_ULLONG; } else if (H5Tequal(src, H5T_NATIVE_FLOAT)) { src_type_name = "float"; src_type = FLT_FLOAT; } else if (H5Tequal(src, H5T_NATIVE_DOUBLE)) { src_type_name = "double"; src_type = FLT_DOUBLE; #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE && H5_SIZEOF_LONG_DOUBLE!=0 } else if (H5Tequal(src, H5T_NATIVE_LDOUBLE)) { src_type_name = "long double"; src_type = FLT_LDOUBLE; #endif } else { src_type_name = "UNKNOWN"; src_type = OTHER; } /* What is the name of the destination type */ if (H5Tequal(dst, H5T_NATIVE_SCHAR)) { dst_type_name = "signed char"; dst_type = INT_SCHAR; } else if (H5Tequal(dst, H5T_NATIVE_UCHAR)) { dst_type_name = "unsigned char"; dst_type = INT_UCHAR; } else if (H5Tequal(dst, H5T_NATIVE_SHORT)) { dst_type_name = "short"; dst_type = INT_SHORT; } else if (H5Tequal(dst, H5T_NATIVE_USHORT)) { dst_type_name = "unsigned short"; dst_type = INT_USHORT; } else if (H5Tequal(dst, H5T_NATIVE_INT)) { dst_type_name = "int"; dst_type = INT_INT; } else if (H5Tequal(dst, H5T_NATIVE_UINT)) { dst_type_name = "unsigned int"; dst_type = INT_UINT; } else if (H5Tequal(dst, H5T_NATIVE_LONG)) { dst_type_name = "long"; dst_type = INT_LONG; } else if (H5Tequal(dst, H5T_NATIVE_ULONG)) { dst_type_name = "unsigned long"; dst_type = INT_ULONG; } else if (H5Tequal(dst, H5T_NATIVE_LLONG)) { dst_type_name = "long long"; dst_type = INT_LLONG; } else if (H5Tequal(dst, H5T_NATIVE_ULLONG)) { dst_type_name = "unsigned long long"; dst_type = INT_ULLONG; } else if (H5Tequal(dst, H5T_NATIVE_FLOAT)) { dst_type_name = "float"; dst_type = FLT_FLOAT; } else if (H5Tequal(dst, H5T_NATIVE_DOUBLE)) { dst_type_name = "double"; dst_type = FLT_DOUBLE; #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE && H5_SIZEOF_LONG_DOUBLE!=0 } else if (H5Tequal(dst, H5T_NATIVE_LDOUBLE)) { dst_type_name = "long double"; dst_type = FLT_LDOUBLE; #endif } else { dst_type_name = "UNKNOWN"; dst_type = OTHER; } /* Sanity checks */ if (OTHER==src_type || OTHER==dst_type) { HDsnprintf(str, sizeof(str), "Testing %s %s -> %s conversions", name, src_type_name, dst_type_name); HDprintf("%-70s", str); H5_FAILED(); HDputs(" Unknown data type."); goto error; } if ((INT_SCHAR==src_type || INT_UCHAR==src_type || INT_SHORT==src_type || INT_USHORT==src_type || INT_INT==src_type || INT_UINT==src_type || INT_LONG==src_type || INT_ULONG==src_type || INT_LLONG==src_type || INT_ULLONG==src_type) && (FLT_FLOAT!=dst_type && FLT_DOUBLE!=dst_type #if H5_SIZEOF_LONG_DOUBLE !=0 && FLT_LDOUBLE!=dst_type #endif )) { HDsnprintf(str, sizeof(str), "Testing %s %s -> %s conversions", name, src_type_name, dst_type_name); HDprintf("%-70s", str); H5_FAILED(); HDputs(" 1. Not an integer-float conversion."); goto error; } if ((FLT_FLOAT==src_type || FLT_DOUBLE==src_type #if H5_SIZEOF_LONG_DOUBLE !=0 || FLT_LDOUBLE==src_type #endif ) && (INT_SCHAR!=dst_type && INT_UCHAR!=dst_type && INT_SHORT!=dst_type && INT_USHORT!=dst_type && INT_INT!=dst_type && INT_UINT!=dst_type && INT_LONG!=dst_type && INT_ULONG!=dst_type && INT_LLONG!=dst_type && INT_ULLONG!=dst_type)) { HDsnprintf(str, sizeof(str), "Testing %s %s -> %s conversions", name, src_type_name, dst_type_name); HDprintf("%-70s", str); H5_FAILED(); HDputs(" 2. Not a float-integer conversion."); goto error; } if (INT_SCHAR==src_type || INT_UCHAR==src_type || INT_SHORT==src_type || INT_USHORT==src_type || INT_INT==src_type || INT_UINT==src_type || INT_LONG==src_type || INT_ULONG==src_type || INT_LLONG==src_type || INT_ULLONG==src_type) { HDsnprintf(str, sizeof(str), "Testing %s %s -> %s conversions", name, src_type_name, dst_type_name); HDprintf("%-70s", str); HDfflush(stdout); fails_this_test=0; } else { if(run_test==TEST_NORMAL) HDsnprintf(str, sizeof(str), "Testing %s normalized %s -> %s conversions", name, src_type_name, dst_type_name); else if(run_test==TEST_DENORM) HDsnprintf(str, sizeof(str), "Testing %s denormalized %s -> %s conversions", name, src_type_name, dst_type_name); else HDsnprintf(str, sizeof(str), "Testing %s special %s -> %s conversions", name, src_type_name, dst_type_name); HDprintf("%-70s", str); HDfflush(stdout); fails_this_test=0; } /* Some information about datatypes */ sendian = H5Tget_order(src); dendian = H5Tget_order(dst); src_size = H5Tget_size(src); dst_size = H5Tget_size(dst); src_nbits = H5Tget_precision(src); /* not 8*src_size, esp on J90 - QAK */ dst_nbits = H5Tget_precision(dst); /* not 8*dst_size, esp on J90 - QAK */ aligned = HDcalloc((size_t)1, MAX(sizeof(long double), sizeof(long long))); #ifdef SHOW_OVERFLOWS noverflows_g = 0; #endif /* This is for some Linux systems where long double has the size * 12 bytes but precision is 10 bytes. The 2 unused bytes may * have garbage causing wrong value comparison. */ HDmemset(&hw_ldouble, 0, sizeof(long double)); /* Create a dataset transfer property list and datatype conversion * exception handler function and pass in fill value. This is mainly * for NetCDF compatibility, which requests fill in fill value when * conversion exception happens. We only test (unsigned) int - float * and float - (unsigned) int conversions, which should cover more cases. */ if((dxpl_id = H5Pcreate(H5P_DATASET_XFER)) < 0) goto error; if((src_type == INT_INT && dst_type == FLT_FLOAT) || (src_type == INT_UINT && dst_type == FLT_FLOAT) || (src_type == FLT_FLOAT && dst_type == INT_UINT) || (src_type == FLT_FLOAT && dst_type == INT_INT)) { if(H5Pset_type_conv_cb(dxpl_id, except_func, &fill_value) < 0) goto error; else except_set = TRUE; if(H5Pget_type_conv_cb(dxpl_id, &op, &user_data) < 0) goto error; if(op != except_func || *(int*)user_data != fill_value) goto error; } /* Allocate and initialize the source buffer through macro INIT_INTEGER if the source is integer, * INIT_FP_NORM if floating-point. The BUF will be used for the conversion while the SAVED buffer will be * used for the comparison later. */ if(src_type == INT_SCHAR) { INIT_INTEGER(signed char, SCHAR_MAX, SCHAR_MIN, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_UCHAR) { INIT_INTEGER(unsigned char, UCHAR_MAX, 0, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_SHORT) { INIT_INTEGER(short, SHRT_MAX, SHRT_MIN, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_USHORT) { INIT_INTEGER(unsigned short, USHRT_MAX, 0, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_INT) { INIT_INTEGER(int, INT_MAX, INT_MIN, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_UINT) { INIT_INTEGER(unsigned int, UINT_MAX, 0, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_LONG) { INIT_INTEGER(long, LONG_MAX, LONG_MIN, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_ULONG) { INIT_INTEGER(unsigned long, ULONG_MAX, 0, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_LLONG) { INIT_INTEGER(long long, LLONG_MAX, LLONG_MIN, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == INT_ULLONG) { INIT_INTEGER(unsigned long long, ULLONG_MAX, 0, src_size, dst_size, src_nbits, buf, saved, nelmts); } else if(src_type == FLT_FLOAT) { if(run_test==TEST_NORMAL) { INIT_FP_NORM(float, FLT_MAX, FLT_MIN, FLT_MAX_10_EXP, FLT_MIN_10_EXP, src_size, dst_size, buf, saved, nelmts); } else if(run_test==TEST_DENORM) { INIT_FP_DENORM(float, FLT_MANT_DIG, src_size, src_nbits, sendian, dst_size, buf, saved, nelmts); } else { INIT_FP_SPECIAL(src_size, src_nbits, sendian, FLT_MANT_DIG, dst_size, buf, saved, nelmts); } } else if(src_type == FLT_DOUBLE) { if(run_test==TEST_NORMAL) { INIT_FP_NORM(double, DBL_MAX, DBL_MIN, DBL_MAX_10_EXP, DBL_MIN_10_EXP, src_size, dst_size, buf, saved, nelmts); } else if(run_test==TEST_DENORM) { INIT_FP_DENORM(double, DBL_MANT_DIG, src_size, src_nbits, sendian, dst_size, buf, saved, nelmts); } else { INIT_FP_SPECIAL(src_size, src_nbits, sendian, DBL_MANT_DIG, dst_size, buf, saved, nelmts); } #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE && H5_SIZEOF_LONG_DOUBLE!=0 } else if(src_type == FLT_LDOUBLE) { if(run_test==TEST_NORMAL) { INIT_FP_NORM(long double, LDBL_MAX, LDBL_MIN, LDBL_MAX_10_EXP, LDBL_MIN_10_EXP, src_size, dst_size, buf, saved, nelmts); } else if(run_test==TEST_DENORM) { INIT_FP_DENORM(long double, LDBL_MANT_DIG, src_size, src_nbits, sendian, dst_size, buf, saved, nelmts); } else { INIT_FP_SPECIAL(src_size, src_nbits, sendian, LDBL_MANT_DIG, dst_size, buf, saved, nelmts); } #endif } else goto error; /* Perform the conversion */ if(H5Tconvert(src, dst, nelmts, buf, NULL, dxpl_id) < 0) goto error; /* Check the results from the library against hardware */ for (j=0; j=max_fails) { if(run_test==TEST_NORMAL) HDputs(" maximum failures reached, aborting test..."); else if(run_test==TEST_DENORM || run_test==TEST_SPECIAL) HDputs(" maximum warnings reached, aborting test..."); HDputs(" (dst is library's conversion output. ans is compiler's conversion output.)"); goto done; } } if(!fails_all_tests) PASSED(); done: if (buf) aligned_free(buf); if (saved) aligned_free(saved); if (aligned) HDfree(aligned); HDfflush(stdout); /* Restore the default error handler (set in h5_reset()) */ h5_restore_err(); reset_hdf5(); /*print statistics*/ /* If the source is normalized floating values, treat the failures as error; * if it is denormalized or special floating values, treat the failure as warning.*/ if(run_test==TEST_NORMAL) return (int)fails_all_tests; else if(run_test==TEST_DENORM || run_test==TEST_SPECIAL) return 0; error: if (buf) aligned_free(buf); if (saved) aligned_free(saved); if (aligned) HDfree(aligned); HDfflush(stdout); /* Restore the default error handler (set in h5_reset()) */ h5_restore_err(); reset_hdf5(); /*print statistics*/ if(run_test==TEST_NORMAL) return MAX((int)fails_all_tests, 1); else { HDassert(run_test==TEST_DENORM || run_test==TEST_SPECIAL); return 1; } } /*------------------------------------------------------------------------- * Function: overflows * * Purpose: When convert from float or double to any integer type, * check if overflow occurs. * * * Return: TRUE: overflow happens * * FALSE: no overflow * * Programmer: Raymond Lu * Monday, Nov 17, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static hbool_t overflows(unsigned char *origin_bits, hid_t src_id, size_t dst_num_bits) { hbool_t ret_value=FALSE; hsize_t expt; size_t mant_digits=0, expt_digits=0, bias=0; size_t epos, mpos; size_t src_prec=0; /*source type precision in bits*/ H5T_norm_t norm; ssize_t indx; unsigned char bits[32], mant_bits[32]; HDmemset(bits, 0, (size_t)32); HDmemset(mant_bits, 0, (size_t)32); /* * Sometimes, type size isn't equal to the precision like Linux's "long * double", where size is 96 bits and precision is 80 bits. */ src_prec = H5Tget_precision(src_id); H5Tget_fields(src_id, NULL, &epos, &expt_digits, &mpos, &mant_digits); bias = H5Tget_ebias(src_id); norm = H5Tget_norm(src_id); HDmemcpy(bits, origin_bits, src_prec/8+1); /*Check for special cases: +Inf, -Inf*/ if (H5T__bit_find (bits, mpos, mant_digits, H5T_BIT_LSB, TRUE) < 0) { if (H5T__bit_find (bits, epos, expt_digits, H5T_BIT_LSB, FALSE) < 0) { ret_value=TRUE; goto done; } } else if (H5T_NORM_NONE==norm && H5T__bit_find (bits, mpos, mant_digits-1, H5T_BIT_LSB, TRUE) < 0 && H5T__bit_find (bits, epos, expt_digits, H5T_BIT_LSB, FALSE) < 0) { /*This is a special case for the source of no implied mantissa bit. *If the exponent bits are all 1s and only the 1st bit of mantissa *is set to 1. It's infinity. The Intel-Linux "long double" is this case.*/ ret_value=TRUE; goto done; } /* get exponent */ expt = H5T__bit_get_d(bits, mant_digits, expt_digits) - bias; if(expt>=(dst_num_bits-1)) { ret_value=TRUE; goto done; } /* get significand */ H5T__bit_copy (mant_bits, (size_t)0, bits, (size_t)0, mant_digits); /* restore implicit bit if normalization is implied*/ if(norm == H5T_NORM_IMPLIED) { H5T__bit_inc(mant_bits, mant_digits, (size_t)1); mant_digits++; } /* shift significand */ H5T__bit_shift (mant_bits, (ssize_t)(expt-expt_digits), (size_t)0, (size_t)(32 * 8)); indx = H5T__bit_find(mant_bits, (size_t)0, (size_t)(32 * 8), H5T_BIT_MSB, 1); if((size_t)indx>=dst_num_bits) ret_value=TRUE; done: return ret_value; } /*------------------------------------------------------------------------- * Function: run_integer_tests * * Purpose: Runs all integer tests. * * Return: Number of errors * * Programmer: Robb Matzke * Tuesday, November 24, 1998 * * Modifications: * *------------------------------------------------------------------------- */ static int run_integer_tests(const char *name) { int nerrors = 0; nerrors += test_conv_int_1(name, H5T_NATIVE_SCHAR, H5T_NATIVE_UCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_SCHAR, H5T_NATIVE_SHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_SCHAR, H5T_NATIVE_USHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_SCHAR, H5T_NATIVE_INT); nerrors += test_conv_int_1(name, H5T_NATIVE_SCHAR, H5T_NATIVE_UINT); #if H5_SIZEOF_LONG!=H5_SIZEOF_INT nerrors += test_conv_int_1(name, H5T_NATIVE_SCHAR, H5T_NATIVE_LONG); nerrors += test_conv_int_1(name, H5T_NATIVE_SCHAR, H5T_NATIVE_ULONG); #endif #if H5_SIZEOF_LONG_LONG!=H5_SIZEOF_LONG nerrors += test_conv_int_1(name, H5T_NATIVE_SCHAR, H5T_NATIVE_LLONG); nerrors += test_conv_int_1(name, H5T_NATIVE_SCHAR, H5T_NATIVE_ULLONG); #endif nerrors += test_conv_int_1(name, H5T_NATIVE_UCHAR, H5T_NATIVE_SCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_UCHAR, H5T_NATIVE_SHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_UCHAR, H5T_NATIVE_USHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_UCHAR, H5T_NATIVE_INT); nerrors += test_conv_int_1(name, H5T_NATIVE_UCHAR, H5T_NATIVE_UINT); #if H5_SIZEOF_LONG!=H5_SIZEOF_INT nerrors += test_conv_int_1(name, H5T_NATIVE_UCHAR, H5T_NATIVE_LONG); nerrors += test_conv_int_1(name, H5T_NATIVE_UCHAR, H5T_NATIVE_ULONG); #endif #if H5_SIZEOF_LONG_LONG!=H5_SIZEOF_LONG nerrors += test_conv_int_1(name, H5T_NATIVE_UCHAR, H5T_NATIVE_LLONG); nerrors += test_conv_int_1(name, H5T_NATIVE_UCHAR, H5T_NATIVE_ULLONG); #endif nerrors += test_conv_int_1(name, H5T_NATIVE_SHORT, H5T_NATIVE_SCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_SHORT, H5T_NATIVE_UCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_SHORT, H5T_NATIVE_USHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_SHORT, H5T_NATIVE_INT); nerrors += test_conv_int_1(name, H5T_NATIVE_SHORT, H5T_NATIVE_UINT); #if H5_SIZEOF_LONG!=H5_SIZEOF_INT nerrors += test_conv_int_1(name, H5T_NATIVE_SHORT, H5T_NATIVE_LONG); nerrors += test_conv_int_1(name, H5T_NATIVE_SHORT, H5T_NATIVE_ULONG); #endif #if H5_SIZEOF_LONG_LONG!=H5_SIZEOF_LONG nerrors += test_conv_int_1(name, H5T_NATIVE_SHORT, H5T_NATIVE_LLONG); nerrors += test_conv_int_1(name, H5T_NATIVE_SHORT, H5T_NATIVE_ULLONG); #endif nerrors += test_conv_int_1(name, H5T_NATIVE_USHORT, H5T_NATIVE_SCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_USHORT, H5T_NATIVE_UCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_USHORT, H5T_NATIVE_SHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_USHORT, H5T_NATIVE_INT); nerrors += test_conv_int_1(name, H5T_NATIVE_USHORT, H5T_NATIVE_UINT); #if H5_SIZEOF_LONG!=H5_SIZEOF_INT nerrors += test_conv_int_1(name, H5T_NATIVE_USHORT, H5T_NATIVE_LONG); nerrors += test_conv_int_1(name, H5T_NATIVE_USHORT, H5T_NATIVE_ULONG); #endif #if H5_SIZEOF_LONG_LONG!=H5_SIZEOF_LONG nerrors += test_conv_int_1(name, H5T_NATIVE_USHORT, H5T_NATIVE_LLONG); nerrors += test_conv_int_1(name, H5T_NATIVE_USHORT, H5T_NATIVE_ULLONG); #endif nerrors += test_conv_int_1(name, H5T_NATIVE_INT, H5T_NATIVE_SCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_INT, H5T_NATIVE_UCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_INT, H5T_NATIVE_SHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_INT, H5T_NATIVE_USHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_INT, H5T_NATIVE_UINT); #if H5_SIZEOF_LONG!=H5_SIZEOF_INT nerrors += test_conv_int_1(name, H5T_NATIVE_INT, H5T_NATIVE_LONG); nerrors += test_conv_int_1(name, H5T_NATIVE_INT, H5T_NATIVE_ULONG); #endif #if H5_SIZEOF_LONG_LONG!=H5_SIZEOF_LONG nerrors += test_conv_int_1(name, H5T_NATIVE_INT, H5T_NATIVE_LLONG); nerrors += test_conv_int_1(name, H5T_NATIVE_INT, H5T_NATIVE_ULLONG); #endif nerrors += test_conv_int_1(name, H5T_NATIVE_UINT, H5T_NATIVE_SCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_UINT, H5T_NATIVE_UCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_UINT, H5T_NATIVE_SHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_UINT, H5T_NATIVE_USHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_UINT, H5T_NATIVE_INT); #if H5_SIZEOF_LONG!=H5_SIZEOF_INT nerrors += test_conv_int_1(name, H5T_NATIVE_UINT, H5T_NATIVE_LONG); nerrors += test_conv_int_1(name, H5T_NATIVE_UINT, H5T_NATIVE_ULONG); #endif #if H5_SIZEOF_LONG_LONG!=H5_SIZEOF_LONG nerrors += test_conv_int_1(name, H5T_NATIVE_UINT, H5T_NATIVE_LLONG); nerrors += test_conv_int_1(name, H5T_NATIVE_UINT, H5T_NATIVE_ULLONG); #endif #if H5_SIZEOF_LONG!=H5_SIZEOF_INT nerrors += test_conv_int_1(name, H5T_NATIVE_LONG, H5T_NATIVE_SCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_LONG, H5T_NATIVE_UCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_LONG, H5T_NATIVE_SHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_LONG, H5T_NATIVE_USHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_LONG, H5T_NATIVE_INT); nerrors += test_conv_int_1(name, H5T_NATIVE_LONG, H5T_NATIVE_UINT); nerrors += test_conv_int_1(name, H5T_NATIVE_LONG, H5T_NATIVE_ULONG); #if H5_SIZEOF_LONG_LONG!=H5_SIZEOF_LONG nerrors += test_conv_int_1(name, H5T_NATIVE_LONG, H5T_NATIVE_LLONG); nerrors += test_conv_int_1(name, H5T_NATIVE_LONG, H5T_NATIVE_ULLONG); #endif #endif #if H5_SIZEOF_LONG!=H5_SIZEOF_INT nerrors += test_conv_int_1(name, H5T_NATIVE_ULONG, H5T_NATIVE_SCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_ULONG, H5T_NATIVE_UCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_ULONG, H5T_NATIVE_SHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_ULONG, H5T_NATIVE_USHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_ULONG, H5T_NATIVE_INT); nerrors += test_conv_int_1(name, H5T_NATIVE_ULONG, H5T_NATIVE_UINT); nerrors += test_conv_int_1(name, H5T_NATIVE_ULONG, H5T_NATIVE_LONG); #if H5_SIZEOF_LONG_LONG!=H5_SIZEOF_LONG nerrors += test_conv_int_1(name, H5T_NATIVE_ULONG, H5T_NATIVE_LLONG); nerrors += test_conv_int_1(name, H5T_NATIVE_ULONG, H5T_NATIVE_ULLONG); #endif #endif #if H5_SIZEOF_LONG_LONG!=H5_SIZEOF_LONG nerrors += test_conv_int_1(name, H5T_NATIVE_LLONG, H5T_NATIVE_SCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_LLONG, H5T_NATIVE_UCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_LLONG, H5T_NATIVE_SHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_LLONG, H5T_NATIVE_USHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_LLONG, H5T_NATIVE_INT); nerrors += test_conv_int_1(name, H5T_NATIVE_LLONG, H5T_NATIVE_UINT); #if H5_SIZEOF_LONG!=H5_SIZEOF_INT nerrors += test_conv_int_1(name, H5T_NATIVE_LLONG, H5T_NATIVE_LONG); nerrors += test_conv_int_1(name, H5T_NATIVE_LLONG, H5T_NATIVE_ULONG); #endif nerrors += test_conv_int_1(name, H5T_NATIVE_LLONG, H5T_NATIVE_ULLONG); #endif #if H5_SIZEOF_LONG_LONG!=H5_SIZEOF_LONG nerrors += test_conv_int_1(name, H5T_NATIVE_ULLONG, H5T_NATIVE_SCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_ULLONG, H5T_NATIVE_UCHAR); nerrors += test_conv_int_1(name, H5T_NATIVE_ULLONG, H5T_NATIVE_SHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_ULLONG, H5T_NATIVE_USHORT); nerrors += test_conv_int_1(name, H5T_NATIVE_ULLONG, H5T_NATIVE_INT); nerrors += test_conv_int_1(name, H5T_NATIVE_ULLONG, H5T_NATIVE_UINT); #if H5_SIZEOF_LONG!=H5_SIZEOF_INT nerrors += test_conv_int_1(name, H5T_NATIVE_ULLONG, H5T_NATIVE_LONG); nerrors += test_conv_int_1(name, H5T_NATIVE_ULLONG, H5T_NATIVE_ULONG); #endif nerrors += test_conv_int_1(name, H5T_NATIVE_ULLONG, H5T_NATIVE_LLONG); #endif return nerrors; } /*------------------------------------------------------------------------- * Function: run_fp_tests * * Purpose: Runs all floating-point tests. * * Return: Number of errors * * Programmer: Raymond Lu * Tuesday, March 22, 2005 * * Modifications: * *------------------------------------------------------------------------- */ static int run_fp_tests(const char *name) { int nerrors = 0; if(!strcmp(name, "noop")) { nerrors += test_conv_flt_1("noop", TEST_NOOP, H5T_NATIVE_FLOAT, H5T_NATIVE_FLOAT); nerrors += test_conv_flt_1("noop", TEST_NOOP, H5T_NATIVE_DOUBLE, H5T_NATIVE_DOUBLE); #if H5_SIZEOF_LONG_DOUBLE !=0 nerrors += test_conv_flt_1("noop", TEST_NOOP, H5T_NATIVE_LDOUBLE, H5T_NATIVE_LDOUBLE); #endif goto done; } /*Test normalized values. TEST_NORMAL indicates normalized values.*/ nerrors += test_conv_flt_1(name, TEST_NORMAL, H5T_NATIVE_FLOAT, H5T_NATIVE_DOUBLE); nerrors += test_conv_flt_1(name, TEST_NORMAL, H5T_NATIVE_DOUBLE, H5T_NATIVE_FLOAT); #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE && H5_SIZEOF_LONG_DOUBLE !=0 nerrors += test_conv_flt_1(name, TEST_NORMAL, H5T_NATIVE_FLOAT, H5T_NATIVE_LDOUBLE); nerrors += test_conv_flt_1(name, TEST_NORMAL, H5T_NATIVE_DOUBLE, H5T_NATIVE_LDOUBLE); nerrors += test_conv_flt_1(name, TEST_NORMAL, H5T_NATIVE_LDOUBLE, H5T_NATIVE_FLOAT); nerrors += test_conv_flt_1(name, TEST_NORMAL, H5T_NATIVE_LDOUBLE, H5T_NATIVE_DOUBLE); #endif /*Test denormalized values. TEST_DENORM indicates denormalized values.*/ nerrors += test_conv_flt_1(name, TEST_DENORM, H5T_NATIVE_FLOAT, H5T_NATIVE_DOUBLE); nerrors += test_conv_flt_1(name, TEST_DENORM, H5T_NATIVE_DOUBLE, H5T_NATIVE_FLOAT); #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE && H5_SIZEOF_LONG_DOUBLE!=0 nerrors += test_conv_flt_1(name, TEST_DENORM, H5T_NATIVE_FLOAT, H5T_NATIVE_LDOUBLE); nerrors += test_conv_flt_1(name, TEST_DENORM, H5T_NATIVE_DOUBLE, H5T_NATIVE_LDOUBLE); #ifndef H5_DISABLE_SOME_LDOUBLE_CONV nerrors += test_conv_flt_1(name, TEST_DENORM, H5T_NATIVE_LDOUBLE, H5T_NATIVE_FLOAT); #else { char str[256]; /*string */ HDsnprintf(str, sizeof(str), "Testing %s denormalized %s -> %s conversions", name, "long double", "float"); HDprintf("%-70s", str); SKIPPED(); #if H5_SIZEOF_LONG_DOUBLE!=0 HDputs(" Test skipped due to the conversion problem on IBM ppc64le cpu."); #else HDputs(" Test skipped due to disabled long double."); #endif } #endif nerrors += test_conv_flt_1(name, TEST_DENORM, H5T_NATIVE_LDOUBLE, H5T_NATIVE_DOUBLE); #endif /*Test special values, +/-0, +/-infinity, +/-QNaN, +/-SNaN.*/ nerrors += test_conv_flt_1(name, TEST_SPECIAL, H5T_NATIVE_FLOAT, H5T_NATIVE_DOUBLE); nerrors += test_conv_flt_1(name, TEST_SPECIAL, H5T_NATIVE_DOUBLE, H5T_NATIVE_FLOAT); #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE && H5_SIZEOF_LONG_DOUBLE!=0 nerrors += test_conv_flt_1(name, TEST_SPECIAL, H5T_NATIVE_FLOAT, H5T_NATIVE_LDOUBLE); nerrors += test_conv_flt_1(name, TEST_SPECIAL, H5T_NATIVE_DOUBLE, H5T_NATIVE_LDOUBLE); #ifndef H5_DISABLE_SOME_LDOUBLE_CONV nerrors += test_conv_flt_1(name, TEST_SPECIAL, H5T_NATIVE_LDOUBLE, H5T_NATIVE_FLOAT); nerrors += test_conv_flt_1(name, TEST_SPECIAL, H5T_NATIVE_LDOUBLE, H5T_NATIVE_DOUBLE); #else { char str[256]; /*string */ HDsnprintf(str, sizeof(str), "Testing %s special %s -> %s conversions", name, "long double", "float or double"); HDprintf("%-70s", str); SKIPPED(); #if H5_SIZEOF_LONG_DOUBLE!=0 HDputs(" Test skipped due to the conversion problem on IBM ppc64le cpu."); #else HDputs(" Test skipped due to disabled long double."); #endif } #endif #endif done: return nerrors; } /*------------------------------------------------------------------------- * Function: run_int_fp_conv * * Purpose: Runs all integer-float tests. * * Return: Number of errors * * Programmer: Raymond Lu * Monday, November 10, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static int run_int_fp_conv(const char *name) { int nerrors = 0; nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_SCHAR, H5T_NATIVE_FLOAT); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_SCHAR, H5T_NATIVE_DOUBLE); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_UCHAR, H5T_NATIVE_FLOAT); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_UCHAR, H5T_NATIVE_DOUBLE); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_SHORT, H5T_NATIVE_FLOAT); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_SHORT, H5T_NATIVE_DOUBLE); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_USHORT, H5T_NATIVE_FLOAT); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_USHORT, H5T_NATIVE_DOUBLE); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_INT, H5T_NATIVE_FLOAT); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_INT, H5T_NATIVE_DOUBLE); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_UINT, H5T_NATIVE_FLOAT); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_UINT, H5T_NATIVE_DOUBLE); #if H5_SIZEOF_LONG!=H5_SIZEOF_INT nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_LONG, H5T_NATIVE_FLOAT); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_LONG, H5T_NATIVE_DOUBLE); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_ULONG, H5T_NATIVE_FLOAT); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_ULONG, H5T_NATIVE_DOUBLE); #endif #if H5_SIZEOF_LONG_LONG!=H5_SIZEOF_LONG nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_LLONG, H5T_NATIVE_FLOAT); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_LLONG, H5T_NATIVE_DOUBLE); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_ULLONG, H5T_NATIVE_FLOAT); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_ULLONG, H5T_NATIVE_DOUBLE); #endif #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_SCHAR, H5T_NATIVE_LDOUBLE); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_UCHAR, H5T_NATIVE_LDOUBLE); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_SHORT, H5T_NATIVE_LDOUBLE); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_USHORT, H5T_NATIVE_LDOUBLE); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_INT, H5T_NATIVE_LDOUBLE); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_UINT, H5T_NATIVE_LDOUBLE); #if H5_SIZEOF_LONG!=H5_SIZEOF_INT #if !defined(H5_LONG_TO_LDOUBLE_SPECIAL) && !defined(H5_DISABLE_SOME_LDOUBLE_CONV) nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_LONG, H5T_NATIVE_LDOUBLE); nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_ULONG, H5T_NATIVE_LDOUBLE); #else { char str[256]; /*string */ HDsnprintf(str, sizeof(str), "Testing %s %s -> %s conversions", name, "(unsigned) long", "long double"); HDprintf("%-70s", str); SKIPPED(); #if H5_SIZEOF_LONG_DOUBLE!=0 HDputs(" Test skipped due to the special algorithm of hardware conversion."); #else HDputs(" Test skipped due to disabled long double."); #endif } #endif #endif /* H5_SIZEOF_LONG!=H5_SIZEOF_INT */ #if H5_SIZEOF_LONG_LONG!=H5_SIZEOF_LONG #if H5_LLONG_TO_LDOUBLE_CORRECT nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_LLONG, H5T_NATIVE_LDOUBLE); #else /* H5_LLONG_TO_LDOUBLE_CORRECT */ { char str[256]; /*hello string */ HDsnprintf(str, sizeof(str), "Testing %s %s -> %s conversions", name, "long long", "long double"); HDprintf("%-70s", str); SKIPPED(); HDputs(" Test skipped due to compiler error in handling conversion."); } #endif /* H5_LLONG_TO_LDOUBLE_CORRECT */ #if H5_LLONG_TO_LDOUBLE_CORRECT nerrors += test_conv_int_fp(name, TEST_NORMAL, H5T_NATIVE_ULLONG, H5T_NATIVE_LDOUBLE); #else /* H5_LLONG_TO_LDOUBLE_CORRECT */ { char str[256]; /*hello string */ HDsnprintf(str, sizeof(str), "Testing %s %s -> %s conversions", name, "unsigned long long", "long double"); HDprintf("%-70s", str); SKIPPED(); HDputs(" Test skipped due to compiler not handling conversion."); } #endif /* H5_LLONG_TO_LDOUBLE_CORRECT */ #endif #endif return nerrors; } /*------------------------------------------------------------------------- * Function: run_fp_int_conv * * Purpose: Runs all float-integer tests. * * Return: Number of errors * * Programmer: Raymond Lu * Monday, November 10, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static int run_fp_int_conv(const char *name) { int nerrors = 0; int test_values; for(test_values = TEST_NORMAL; test_values <= TEST_SPECIAL; test_values++) { nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_FLOAT, H5T_NATIVE_SCHAR); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_DOUBLE, H5T_NATIVE_SCHAR); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_FLOAT, H5T_NATIVE_UCHAR); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_DOUBLE, H5T_NATIVE_UCHAR); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_FLOAT, H5T_NATIVE_SHORT); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_DOUBLE, H5T_NATIVE_SHORT); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_FLOAT, H5T_NATIVE_USHORT); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_DOUBLE, H5T_NATIVE_USHORT); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_FLOAT, H5T_NATIVE_INT); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_DOUBLE, H5T_NATIVE_INT); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_FLOAT, H5T_NATIVE_UINT); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_DOUBLE, H5T_NATIVE_UINT); #if H5_SIZEOF_LONG!=H5_SIZEOF_INT nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_FLOAT, H5T_NATIVE_LONG); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_DOUBLE, H5T_NATIVE_LONG); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_FLOAT, H5T_NATIVE_ULONG); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_DOUBLE, H5T_NATIVE_ULONG); #endif #if H5_SIZEOF_LONG_LONG!=H5_SIZEOF_LONG if(!strcmp(name, "hw")) { /* Hardware conversion */ nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_FLOAT, H5T_NATIVE_LLONG); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_DOUBLE, H5T_NATIVE_LLONG); } else { /* Software conversion */ nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_FLOAT, H5T_NATIVE_LLONG); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_DOUBLE, H5T_NATIVE_LLONG); } nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_FLOAT, H5T_NATIVE_ULLONG); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_DOUBLE, H5T_NATIVE_ULLONG); #endif #if H5_SIZEOF_LONG_DOUBLE!=H5_SIZEOF_DOUBLE if(test_values != TEST_SPECIAL) { nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_SCHAR); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_UCHAR); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_SHORT); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_USHORT); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_INT); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_UINT); } else { #ifndef H5_DISABLE_SOME_LDOUBLE_CONV nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_SCHAR); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_UCHAR); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_SHORT); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_USHORT); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_INT); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_UINT); #else char str[256]; /*string */ HDsnprintf(str, sizeof(str), "Testing %s special %s -> %s conversions", name, "long double", "signed and unsigned char, short, int, long"); HDprintf("%-70s", str); SKIPPED(); #if H5_SIZEOF_LONG_DOUBLE!=0 HDputs(" Test skipped due to the conversion problem on IBM ppc64le cpu."); #else HDputs(" Test skipped due to disabled long double."); #endif #endif } #if H5_SIZEOF_LONG!=H5_SIZEOF_INT && H5_SIZEOF_LONG_DOUBLE!=0 #ifndef H5_LDOUBLE_TO_LONG_SPECIAL if(test_values != TEST_SPECIAL && test_values != TEST_NORMAL) { nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_LONG); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_ULONG); } else { #ifndef H5_DISABLE_SOME_LDOUBLE_CONV nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_LONG); nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_ULONG); #endif } #else { char str[256]; /*string */ HDsnprintf(str, sizeof(str), "Testing %s %s -> %s conversions", name, "long double", "(unsigned) long"); HDprintf("%-70s", str); SKIPPED(); #if H5_SIZEOF_LONG_DOUBLE!=0 HDputs(" Test skipped due to the special algorithm of hardware conversion."); #else HDputs(" Test skipped due to disabled long double."); #endif } #endif #endif /*H5_SIZEOF_LONG!=H5_SIZEOF_INT && H5_SIZEOF_LONG_DOUBLE!=0 */ #if H5_SIZEOF_LONG_LONG!=H5_SIZEOF_LONG && H5_SIZEOF_LONG_DOUBLE!=0 #ifdef H5_LDOUBLE_TO_LLONG_ACCURATE nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_LLONG); #else /*H5_LDOUBLE_TO_LLONG_ACCURATE*/ { char str[256]; /*string */ HDsnprintf(str, sizeof(str), "Testing %s %s -> %s conversions", name, "long double", "long long"); HDprintf("%-70s", str); SKIPPED(); #if H5_SIZEOF_LONG_DOUBLE!=0 HDputs(" Test skipped due to hardware conversion error."); #else HDputs(" Test skipped due to disabled long double."); #endif } #endif /*H5_LDOUBLE_TO_LLONG_ACCURATE*/ #if defined(H5_LDOUBLE_TO_LLONG_ACCURATE) nerrors += test_conv_int_fp(name, test_values, H5T_NATIVE_LDOUBLE, H5T_NATIVE_ULLONG); #else /*H5_LDOUBLE_TO_LLONG_ACCURATE*/ { char str[256]; /*string */ HDsnprintf(str, sizeof(str), "Testing %s %s -> %s conversions", name, "long double", "unsigned long long"); HDprintf("%-70s", str); SKIPPED(); #if H5_SIZEOF_LONG_DOUBLE!=0 HDputs(" Test skipped due to hardware conversion error."); #else HDputs(" Test skipped due to disabled long double."); #endif } #endif /*H5_LDOUBLE_TO_LLONG_ACCURATE*/ #endif #endif } /* end for */ return nerrors; } /*------------------------------------------------------------------------- * Function: main * * Purpose: Test the data type(integer and floating-point number). * * Return: Success: * * Failure: * * Programmer: Robb Matzke * Tuesday, December 9, 1997 * * Modifications: * Raymond Lu * Monday, April 4, 2005 * These tests were split from dtypes.c because dtypes.c * has grown too big. * *------------------------------------------------------------------------- */ int main(void) { unsigned long nerrors = 0; /* Set the random # seed */ HDsrandom((unsigned)HDtime(NULL)); reset_hdf5(); if (ALIGNMENT) HDprintf("Testing non-aligned conversions (ALIGNMENT=%d)....\n", ALIGNMENT); /* Do the tests */ /* Test H5Tcompiler_conv() for querying hard conversion. */ nerrors += (unsigned long)test_hard_query(); /* Test user-define, query functions and software conversion * for user-defined floating-point types */ nerrors += (unsigned long)test_derived_flt(); /* Test user-define, query functions and software conversion * for user-defined integer types */ nerrors += (unsigned long)test_derived_integer(); /* Does floating point overflow generate a SIGFPE? */ generates_sigfpe(); /* Test degenerate cases */ nerrors += (unsigned long)run_fp_tests("noop"); /* Test hardware floating-point conversion functions */ nerrors += (unsigned long)run_fp_tests("hard"); /* Test hardware integer conversion functions */ nerrors += (unsigned long)run_integer_tests("hard"); /* Test hardware integer-float conversion functions */ nerrors += (unsigned long)run_int_fp_conv("hard"); /* Test hardware float-integer conversion functions */ nerrors += (unsigned long)run_fp_int_conv("hard"); /* Test a few special values for hardware float-integer conversions */ nerrors += (unsigned long)test_particular_fp_integer(); /*---------------------------------------------------------------------- * Software tests *---------------------------------------------------------------------- */ without_hardware_g = TRUE; /* Restore the default error handler (set in h5_reset()) */ h5_restore_err(); reset_hdf5(); /* Test software floating-point conversion functions */ nerrors += (unsigned long)run_fp_tests("soft"); /* Test software integer conversion functions */ nerrors += (unsigned long)test_conv_int_2(); nerrors += (unsigned long)run_integer_tests("soft"); /* Test software float-integer conversion functions */ nerrors += (unsigned long)run_fp_int_conv("soft"); /* Test software integer-float conversion functions */ nerrors += (unsigned long)run_int_fp_conv("soft"); /* Restore the default error handler (set in h5_reset()) */ h5_restore_err(); reset_hdf5(); /* Restore the default error handler (set in h5_reset()) */ h5_restore_err(); if (nerrors) { HDprintf("***** %lu FAILURE%s! *****\n", nerrors, 1==nerrors?"":"S"); HDexit(EXIT_FAILURE); } HDprintf("All data type tests passed.\n"); return 0; }