/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* $Id$ */ /*********************************************************** * * Test program: tfile * * Test the low-level file I/O features. * *************************************************************/ #include "hdf5.h" #include "testhdf5.h" #include "H5Bprivate.h" #include "H5Pprivate.h" #define F1_USERBLOCK_SIZE (hsize_t)0 #define F1_OFFSET_SIZE sizeof(haddr_t) #define F1_LENGTH_SIZE sizeof(hsize_t) #define F1_SYM_LEAF_K 4 #define F1_SYM_INTERN_K 16 #define FILE1 "tfile1.h5" #define F2_USERBLOCK_SIZE (hsize_t)512 #define F2_OFFSET_SIZE 8 #define F2_LENGTH_SIZE 8 #define F2_SYM_LEAF_K 8 #define F2_SYM_INTERN_K 32 #define F2_RANK 2 #define F2_DIM0 4 #define F2_DIM1 6 #define F2_DSET "dset" #define FILE2 "tfile2.h5" #define F3_USERBLOCK_SIZE (hsize_t)0 #define F3_OFFSET_SIZE F2_OFFSET_SIZE #define F3_LENGTH_SIZE F2_LENGTH_SIZE #define F3_SYM_LEAF_K F2_SYM_LEAF_K #define F3_SYM_INTERN_K F2_SYM_INTERN_K #define FILE3 "tfile3.h5" #define GRP_NAME "/group" #define DSET_NAME "dataset" #define ATTR_NAME "attr" #define TYPE_NAME "type" #define FILE4 "tfile4.h5" #define OBJ_ID_COUNT_0 0 #define OBJ_ID_COUNT_1 1 #define OBJ_ID_COUNT_2 2 #define OBJ_ID_COUNT_3 3 #define OBJ_ID_COUNT_4 4 #define OBJ_ID_COUNT_6 6 #define OBJ_ID_COUNT_8 8 static void create_objects(hid_t, hid_t, hid_t *, hid_t *, hid_t *, hid_t *); static void test_obj_count_and_id(hid_t, hid_t, hid_t, hid_t, hid_t, hid_t); static void check_file_id(hid_t, hid_t); /**************************************************************** ** ** test_file_create(): Low-level file creation I/O test routine. ** ****************************************************************/ static void test_file_create(void) { hid_t fid1, fid2, fid3; /* HDF5 File IDs */ hid_t tmpl1, tmpl2; /*file creation templates */ hsize_t ublock; /*sizeof userblock */ size_t parm; /*file-creation parameters */ size_t parm2; /*file-creation parameters */ #ifdef H5_WANT_H5_V1_6_COMPAT int iparm; #else /* H5_WANT_H5_V1_6_COMPAT */ unsigned iparm; #endif /* H5_WANT_H5_V1_6_COMPAT */ unsigned iparm2; herr_t ret; /*generic return value */ /* Output message about test being performed */ MESSAGE(5, ("Testing Low-Level File Creation I/O\n")); /* Test create with various sequences of H5F_ACC_EXCL and */ /* H5F_ACC_TRUNC flags */ /* Create with H5F_ACC_EXCL */ /* First ensure the file does not exist */ remove(FILE1); fid1 = H5Fcreate(FILE1, H5F_ACC_EXCL, H5P_DEFAULT, H5P_DEFAULT); CHECK(fid1, FAIL, "H5Fcreate"); /* * try to create the same file with H5F_ACC_TRUNC. This should fail * because fid1 is the same file and is currently open. */ fid2 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT); VERIFY(fid2, FAIL, "H5Fcreate"); /* Close all files */ ret = H5Fclose(fid1); CHECK(ret, FAIL, "H5Fclose"); ret = H5Fclose(fid2); VERIFY(ret, FAIL, "H5Fclose"); /*file should not have been open */ /* * Try again with H5F_ACC_EXCL. This should fail because the file already * exists from the previous steps. */ fid1 = H5Fcreate(FILE1, H5F_ACC_EXCL, H5P_DEFAULT, H5P_DEFAULT); VERIFY(fid1, FAIL, "H5Fcreate"); /* Test create with H5F_ACC_TRUNC. This will truncate the existing file. */ fid1 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT); CHECK(fid1, FAIL, "H5Fcreate"); /* * Try to truncate first file again. This should fail because fid1 is the * same file and is currently open. */ fid2 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT); VERIFY(fid2, FAIL, "H5Fcreate"); /* * Try with H5F_ACC_EXCL. This should fail too because the file already * exists. */ fid2 = H5Fcreate(FILE1, H5F_ACC_EXCL, H5P_DEFAULT, H5P_DEFAULT); VERIFY(fid2, FAIL, "H5Fcreate"); /* Get the file-creation template */ tmpl1 = H5Fget_create_plist(fid1); CHECK(tmpl1, FAIL, "H5Fget_create_plist"); /* Get the file-creation parameters */ ret = H5Pget_userblock(tmpl1, &ublock); CHECK(ret, FAIL, "H5Pget_userblock"); VERIFY(ublock, F1_USERBLOCK_SIZE, "H5Pget_userblock"); ret = H5Pget_sizes(tmpl1, &parm, &parm2); CHECK(ret, FAIL, "H5Pget_sizes"); VERIFY(parm, F1_OFFSET_SIZE, "H5Pget_sizes"); VERIFY(parm2, F1_LENGTH_SIZE, "H5Pget_sizes"); ret = H5Pget_sym_k(tmpl1, &iparm, &iparm2); CHECK(ret, FAIL, "H5Pget_sym_k"); VERIFY(iparm, F1_SYM_INTERN_K, "H5Pget_sym_k"); VERIFY(iparm2, F1_SYM_LEAF_K, "H5Pget_sym_k"); /* Release file-creation template */ ret = H5Pclose(tmpl1); CHECK(ret, FAIL, "H5Pclose"); #ifdef LATER /* Double-check that the atom has been vaporized */ ret = H5Pclose(tmpl1); VERIFY(ret, FAIL, "H5Pclose"); #endif /* Create a new file with a non-standard file-creation template */ tmpl1 = H5Pcreate(H5P_FILE_CREATE); CHECK(tmpl1, FAIL, "H5Pnew"); /* Set the new file-creation parameters */ ret = H5Pset_userblock(tmpl1, F2_USERBLOCK_SIZE); CHECK(ret, FAIL, "H5Pset_userblock"); ret = H5Pset_sizes(tmpl1, F2_OFFSET_SIZE, F2_LENGTH_SIZE); CHECK(ret, FAIL, "H5Pset_sizes"); ret = H5Pset_sym_k(tmpl1, F2_SYM_INTERN_K, F2_SYM_LEAF_K); CHECK(ret, FAIL, "H5Pset_sym_k"); /* * Try to create second file, with non-standard file-creation template * params. */ fid2 = H5Fcreate(FILE2, H5F_ACC_TRUNC, tmpl1, H5P_DEFAULT); CHECK(fid2, FAIL, "H5Fcreate"); /* Release file-creation template */ ret = H5Pclose(tmpl1); CHECK(ret, FAIL, "H5Pclose"); /* Make certain we can create a dataset properly in the file with the userblock */ { hid_t dataset_id, dataspace_id; /* identifiers */ hsize_t dims[F2_RANK]; int data[F2_DIM0][F2_DIM1]; unsigned i,j; /* Create the data space for the dataset. */ dims[0] = F2_DIM0; dims[1] = F2_DIM1; dataspace_id = H5Screate_simple(F2_RANK, dims, NULL); CHECK(dataspace_id, FAIL, "H5Screate_simple"); /* Create the dataset. */ dataset_id = H5Dcreate(fid2, F2_DSET, H5T_NATIVE_INT, dataspace_id, H5P_DEFAULT); CHECK(dataset_id, FAIL, "H5Dcreate"); for(i=0; i<F2_DIM0; i++) for(j=0; j<F2_DIM1; j++) data[i][j]=i*10+j; /* Write data to the new dataset */ ret = H5Dwrite(dataset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, data); CHECK(ret, FAIL, "H5Dwrite"); /* End access to the dataset and release resources used by it. */ ret = H5Dclose(dataset_id); CHECK(ret, FAIL, "H5Dclose"); /* Terminate access to the data space. */ ret = H5Sclose(dataspace_id); CHECK(ret, FAIL, "H5Sclose"); } /* Get the file-creation template */ tmpl1 = H5Fget_create_plist(fid2); CHECK(tmpl1, FAIL, "H5Fget_create_plist"); /* Get the file-creation parameters */ ret = H5Pget_userblock(tmpl1, &ublock); CHECK(ret, FAIL, "H5Pget_userblock"); VERIFY(ublock, F2_USERBLOCK_SIZE, "H5Pget_userblock"); ret = H5Pget_sizes(tmpl1, &parm, &parm2); CHECK(ret, FAIL, "H5Pget_sizes"); VERIFY(parm, F2_OFFSET_SIZE, "H5Pget_sizes"); VERIFY(parm2, F2_LENGTH_SIZE, "H5Pget_sizes"); ret = H5Pget_sym_k(tmpl1, &iparm, &iparm2); CHECK(ret, FAIL, "H5Pget_sym_k"); VERIFY(iparm, F2_SYM_INTERN_K, "H5Pget_sym_k"); VERIFY(iparm2, F2_SYM_LEAF_K, "H5Pget_sym_k"); /* Clone the file-creation template */ tmpl2 = H5Pcopy(tmpl1); CHECK(tmpl2, FAIL, "H5Pcopy"); /* Release file-creation template */ ret = H5Pclose(tmpl1); CHECK(ret, FAIL, "H5Pclose"); /* Set the new file-creation parameter */ ret = H5Pset_userblock(tmpl2, F3_USERBLOCK_SIZE); CHECK(ret, FAIL, "H5Pset_userblock"); /* * Try to create second file, with non-standard file-creation template * params */ fid3 = H5Fcreate(FILE3, H5F_ACC_TRUNC, tmpl2, H5P_DEFAULT); CHECK(fid3, FAIL, "H5Fcreate"); /* Release file-creation template */ ret = H5Pclose(tmpl2); CHECK(ret, FAIL, "H5Pclose"); /* Get the file-creation template */ tmpl1 = H5Fget_create_plist(fid3); CHECK(tmpl1, FAIL, "H5Fget_create_plist"); /* Get the file-creation parameters */ ret = H5Pget_userblock(tmpl1, &ublock); CHECK(ret, FAIL, "H5Pget_userblock"); VERIFY(ublock, F3_USERBLOCK_SIZE, "H5Pget_userblock"); ret = H5Pget_sizes(tmpl1, &parm, &parm2); CHECK(ret, FAIL, "H5Pget_sizes"); VERIFY(parm, F3_OFFSET_SIZE, "H5Pget_sizes"); VERIFY(parm2, F3_LENGTH_SIZE, "H5Pget_sizes"); ret = H5Pget_sym_k(tmpl1, &iparm, &iparm2); CHECK(ret, FAIL, "H5Pget_sym_k"); VERIFY(iparm, F3_SYM_INTERN_K, "H5Pget_sym_k"); VERIFY(iparm2, F3_SYM_LEAF_K, "H5Pget_sym_k"); /* Release file-creation template */ ret = H5Pclose(tmpl1); CHECK(ret, FAIL, "H5Pclose"); /* Close first file */ ret = H5Fclose(fid1); CHECK(ret, FAIL, "H5Fclose"); /* Close second file */ ret = H5Fclose(fid2); CHECK(ret, FAIL, "H5Fclose"); /* Close third file */ ret = H5Fclose(fid3); CHECK(ret, FAIL, "H5Fclose"); } /* test_file_create() */ /**************************************************************** ** ** test_file_open(): Low-level file open I/O test routine. ** ****************************************************************/ static void test_file_open(void) { hid_t fid1, fid2; /*HDF5 File IDs */ hid_t did; /*dataset ID */ hid_t fapl_id; /*file access property list ID */ hid_t tmpl1; /*file creation templates */ hsize_t ublock; /*sizeof user block */ size_t parm; /*file-creation parameters */ size_t parm2; /*file-creation parameters */ #ifdef H5_WANT_H5_V1_6_COMPAT int iparm; #else /* H5_WANT_H5_V1_6_COMPAT */ unsigned iparm; #endif /* H5_WANT_H5_V1_6_COMPAT */ unsigned iparm2; herr_t ret; /*generic return value */ /* * Test single file open */ /* Output message about test being performed */ MESSAGE(5, ("Testing Low-Level File Opening I/O\n")); /* Open first file */ fid1 = H5Fopen(FILE2, H5F_ACC_RDWR, H5P_DEFAULT); CHECK(fid1, FAIL, "H5Fopen"); /* Get the file-creation template */ tmpl1 = H5Fget_create_plist(fid1); CHECK(tmpl1, FAIL, "H5Fget_create_plist"); /* Get the file-creation parameters */ ret = H5Pget_userblock(tmpl1, &ublock); CHECK(ret, FAIL, "H5Pget_userblock"); VERIFY(ublock, F2_USERBLOCK_SIZE, "H5Pget_userblock"); ret = H5Pget_sizes(tmpl1, &parm, &parm2); CHECK(ret, FAIL, "H5Pget_sizes"); VERIFY(parm, F2_OFFSET_SIZE, "H5Pget_sizes"); VERIFY(parm2, F2_LENGTH_SIZE, "H5Pget_sizes"); ret = H5Pget_sym_k(tmpl1, &iparm, &iparm2); CHECK(ret, FAIL, "H5Pget_sym_k"); VERIFY(iparm, F2_SYM_INTERN_K, "H5Pget_sym_k"); VERIFY(iparm2, F2_SYM_LEAF_K, "H5Pget_sym_k"); /* Release file-creation template */ ret = H5Pclose(tmpl1); CHECK(ret, FAIL, "H5Pclose"); /* Close first file */ ret = H5Fclose(fid1); CHECK(ret, FAIL, "H5Fclose"); /* * Test two file opens: one is opened H5F_ACC_RDONLY and H5F_CLOSE_WEAK. * It's closed with an object left open. Then another is opened * H5F_ACC_RDWR, which should fail. */ /* Output message about test being performed */ MESSAGE(5, ("Testing 2 File Openings\n")); /* Create file access property list */ fapl_id = H5Pcreate(H5P_FILE_ACCESS); CHECK(fapl_id, FAIL, "H5Pcreate"); /* Set file close mode to H5F_CLOSE_WEAK */ ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_WEAK); CHECK(ret, FAIL, "H5Pset_fclose_degree"); /* Open file for first time */ fid1 = H5Fopen(FILE2, H5F_ACC_RDONLY, fapl_id); CHECK(fid1, FAIL, "H5Fopen"); /* Open dataset */ did = H5Dopen(fid1, F2_DSET); CHECK(did, FAIL, "H5Dopen"); /* Close first open */ ret = H5Fclose(fid1); CHECK(ret, FAIL, "H5Fclose"); /* Open file for second time, which should fail. */ fid2 = H5Fopen(FILE2, H5F_ACC_RDWR, fapl_id); VERIFY(fid2, FAIL, "H5Fopen"); /* Close dataset from first open */ ret = H5Dclose(did); CHECK(ret, FAIL, "H5Dclose"); } /* test_file_open() */ /**************************************************************** ** ** test_file_close(): low-level file close test routine. ** It mainly tests behavior with close degree. ** *****************************************************************/ static void test_file_close(void) { hid_t fid1, fid2; hid_t fapl_id, access_id; hid_t dataset_id, group_id1, group_id2, group_id3; H5F_close_degree_t fc_degree; herr_t ret; /* Test behavior while opening file multiple times with different * file close degree value */ fid1 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT); CHECK(fid1, FAIL, "H5Fcreate"); fapl_id = H5Pcreate(H5P_FILE_ACCESS); CHECK(fapl_id, FAIL, "H5Pcreate"); ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_STRONG); CHECK(ret, FAIL, "H5Pset_fclose_degree"); ret = H5Pget_fclose_degree(fapl_id, &fc_degree); VERIFY(fc_degree, H5F_CLOSE_STRONG, "H5Pget_fclose_degree"); /* should fail */ fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id); VERIFY(fid2, FAIL, "H5Fopen"); ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_DEFAULT); CHECK(ret, FAIL, "H5Pset_fclose_degree"); /* should succeed */ fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id); CHECK(fid2, FAIL, "H5Fopen"); /* Close first open */ ret = H5Fclose(fid1); CHECK(ret, FAIL, "H5Fclose"); /* Close second open */ ret = H5Fclose(fid2); CHECK(ret, FAIL, "H5Fclose"); /* Test behavior while opening file multiple times with different file * close degree */ fid1 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT); CHECK(fid1, FAIL, "H5Fcreate"); ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_WEAK); CHECK(ret, FAIL, "H5Pset_fclose_degree"); ret = H5Pget_fclose_degree(fapl_id, &fc_degree); VERIFY(fc_degree, H5F_CLOSE_WEAK, "H5Pget_fclose_degree"); /* should succeed */ fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id); CHECK(fid2, FAIL, "H5Fopen"); /* Close first open */ ret = H5Fclose(fid1); CHECK(ret, FAIL, "H5Fclose"); /* Close second open */ ret = H5Fclose(fid2); CHECK(ret, FAIL, "H5Fclose"); /* Test behavior while opening file multiple times with file close * degree STRONG */ ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_STRONG); CHECK(ret, FAIL, "H5Pset_fclose_degree"); fid1 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, fapl_id); CHECK(fid1, FAIL, "H5Fcreate"); ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_WEAK); CHECK(ret, FAIL, "H5Pset_fclose_degree"); /* should fail */ fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id); VERIFY(fid2, FAIL, "H5Fopen"); ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_STRONG); CHECK(ret, FAIL, "H5Pset_fclose_degree"); /* should succeed */ fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id); CHECK(fid2, FAIL, "H5Fopen"); /* Create a dataset and a group in each file open respectively */ create_objects(fid1, fid2, NULL, NULL, NULL, NULL); /* Close first open */ ret = H5Fclose(fid1); CHECK(ret, FAIL, "H5Fclose"); /* Close second open */ ret = H5Fclose(fid2); CHECK(ret, FAIL, "H5Fclose"); /* Test behavior while opening file multiple times with file close * degree SEMI */ ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_SEMI); CHECK(ret, FAIL, "H5Pset_fclose_degree"); fid1 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, fapl_id); CHECK(fid1, FAIL, "H5Fcreate"); ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_DEFAULT); CHECK(ret, FAIL, "H5Pset_fclose_degree"); /* should fail */ fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id); VERIFY(fid2, FAIL, "H5Fopen"); ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_SEMI); CHECK(ret, FAIL, "H5Pset_fclose_degree"); /* should succeed */ fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id); CHECK(fid2, FAIL, "H5Fopen"); /* Create a dataset and a group in each file open respectively */ create_objects(fid1, fid2, &dataset_id, &group_id1, &group_id2, &group_id3); /* Close first open */ ret = H5Fclose(fid1); CHECK(ret, FAIL, "H5Fclose"); /* Close second open, should fail since it is SEMI and objects are * still open. */ ret = H5Fclose(fid2); VERIFY(ret, FAIL, "H5Fclose"); ret = H5Dclose(dataset_id); CHECK(ret, FAIL, "H5Dclose"); ret = H5Gclose(group_id1); CHECK(ret, FAIL, "H5Gclose"); ret = H5Gclose(group_id2); CHECK(ret, FAIL, "H5Gclose"); /* Close second open, should fail since it is SEMI and one group ID is * still open. */ ret = H5Fclose(fid2); VERIFY(ret, FAIL, "H5Fclose"); ret = H5Gclose(group_id3); CHECK(ret, FAIL, "H5Gclose"); /* Close second open again. Should succeed. */ ret = H5Fclose(fid2); CHECK(ret, FAIL, "H5Fclose"); /* Test behavior while opening file multiple times with file close * degree WEAK */ ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_WEAK); CHECK(ret, FAIL, "H5Pset_fclose_degree"); fid1 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, fapl_id); CHECK(fid1, FAIL, "H5Fcreate"); ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_SEMI); CHECK(ret, FAIL, "H5Pset_fclose_degree"); /* should fail */ fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id); VERIFY(fid2, FAIL, "H5Fopen"); ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_DEFAULT); CHECK(ret, FAIL, "H5Pset_fclose_degree"); /* should succeed */ fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id); CHECK(fid2, FAIL, "H5Fopen"); /* Create a dataset and a group in each file open respectively */ create_objects(fid1, fid2, &dataset_id, &group_id1, &group_id2, &group_id3); /* Create more new files and test object count and ID list functions */ test_obj_count_and_id(fid1, fid2, dataset_id, group_id1, group_id2, group_id3); /* Close first open */ ret = H5Fclose(fid1); CHECK(ret, FAIL, "H5Fclose"); /* Close second open. File will be finally closed after all objects * are closed. */ ret = H5Fclose(fid2); CHECK(ret, FAIL, "H5Fclose"); ret = H5Dclose(dataset_id); CHECK(ret, FAIL, "H5Dclose"); ret = H5Gclose(group_id1); CHECK(ret, FAIL, "H5Gclose"); ret = H5Gclose(group_id2); CHECK(ret, FAIL, "H5Gclose"); ret = H5Gclose(group_id3); CHECK(ret, FAIL, "H5Gclose"); /* Test behavior while opening file multiple times with file close * degree DEFAULT */ ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_DEFAULT); CHECK(ret, FAIL, "H5Pset_fclose_degree"); fid1 = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, fapl_id); CHECK(fid1, FAIL, "H5Fcreate"); ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_SEMI); CHECK(ret, FAIL, "H5Pset_fclose_degree"); /* should fail */ fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id); VERIFY(fid2, FAIL, "H5Fopen"); ret = H5Pset_fclose_degree(fapl_id, H5F_CLOSE_DEFAULT); CHECK(ret, FAIL, "H5Pset_fclose_degree"); /* should succeed */ fid2 = H5Fopen(FILE1, H5F_ACC_RDWR, fapl_id); CHECK(fid2, FAIL, "H5Fopen"); /* Create a dataset and a group in each file open respectively */ create_objects(fid1, fid2, &dataset_id, &group_id1, &group_id2, &group_id3); access_id = H5Fget_access_plist(fid1); CHECK(access_id, FAIL, "H5Fget_access_plist"); ret= H5Pget_fclose_degree(access_id, &fc_degree); CHECK(ret, FAIL, "H5Pget_fclose_degree"); switch(fc_degree) { case H5F_CLOSE_STRONG: /* Close first open */ ret = H5Fclose(fid1); CHECK(ret, FAIL, "H5Fclose"); /* Close second open */ ret = H5Fclose(fid2); CHECK(ret, FAIL, "H5Fclose"); break; case H5F_CLOSE_SEMI: /* Close first open */ ret = H5Fclose(fid1); CHECK(ret, FAIL, "H5Fclose"); ret = H5Dclose(dataset_id); CHECK(ret, FAIL, "H5Dclose"); ret = H5Gclose(group_id1); CHECK(ret, FAIL, "H5Gclose"); ret = H5Gclose(group_id2); CHECK(ret, FAIL, "H5Gclose"); ret = H5Gclose(group_id3); CHECK(ret, FAIL, "H5Gclose"); /* Close second open */ ret = H5Fclose(fid2); CHECK(ret, FAIL, "H5Fclose"); break; case H5F_CLOSE_WEAK: /* Close first open */ ret = H5Fclose(fid1); CHECK(ret, FAIL, "H5Fclose"); /* Close second open */ ret = H5Fclose(fid2); CHECK(ret, FAIL, "H5Fclose"); ret = H5Dclose(dataset_id); CHECK(ret, FAIL, "H5Dclose"); ret = H5Gclose(group_id1); CHECK(ret, FAIL, "H5Gclose"); ret = H5Gclose(group_id2); CHECK(ret, FAIL, "H5Gclose"); ret = H5Gclose(group_id3); CHECK(ret, FAIL, "H5Gclose"); break; default: CHECK(fc_degree, H5F_CLOSE_DEFAULT, "H5Pget_fclose_degree"); break; } /* Close file access property list */ ret = H5Pclose(fapl_id); CHECK(ret, FAIL, "H5Pclose"); ret = H5Pclose(access_id); CHECK(ret, FAIL, "H5Pclose"); } /**************************************************************** ** ** create_objects(): routine called by test_file_close to create ** a dataset and a group in file. ** ****************************************************************/ static void create_objects(hid_t fid1, hid_t fid2, hid_t *ret_did, hid_t *ret_gid1, hid_t *ret_gid2, hid_t *ret_gid3) { int oid_count; herr_t ret; /* Check reference counts of file IDs and opened object IDs. * The verification is hard-coded. If in any case, this testing * is changed, remember to check this part and update the macros. */ { oid_count = H5Fget_obj_count(fid1, H5F_OBJ_ALL); CHECK(oid_count, FAIL, "H5Fget_obj_count"); VERIFY(oid_count, OBJ_ID_COUNT_2, "H5Fget_obj_count"); oid_count = H5Fget_obj_count(fid1, H5F_OBJ_DATASET|H5F_OBJ_GROUP|H5F_OBJ_DATATYPE|H5F_OBJ_ATTR); CHECK(oid_count, FAIL, "H5Fget_obj_count"); VERIFY(oid_count, OBJ_ID_COUNT_0, "H5Fget_obj_count"); oid_count = H5Fget_obj_count(fid2, H5F_OBJ_ALL); CHECK(oid_count, FAIL, "H5Fget_obj_count"); VERIFY(oid_count, OBJ_ID_COUNT_2, "H5Fget_obj_count"); oid_count = H5Fget_obj_count(fid2, H5F_OBJ_DATASET|H5F_OBJ_GROUP|H5F_OBJ_DATATYPE|H5F_OBJ_ATTR); CHECK(oid_count, FAIL, "H5Fget_obj_count"); VERIFY(oid_count, OBJ_ID_COUNT_0, "H5Fget_obj_count"); } /* create a dataset in the first file open */ { hid_t dataset_id, dataspace_id; /* identifiers */ hsize_t dims[F2_RANK]; int data[F2_DIM0][F2_DIM1]; unsigned i,j; /* Create the data space for the dataset. */ dims[0] = F2_DIM0; dims[1] = F2_DIM1; dataspace_id = H5Screate_simple(F2_RANK, dims, NULL); CHECK(dataspace_id, FAIL, "H5Screate_simple"); /* Create the dataset. */ dataset_id = H5Dcreate(fid1, "/dset", H5T_NATIVE_INT, dataspace_id, H5P_DEFAULT); CHECK(dataset_id, FAIL, "H5Dcreate"); for(i=0; i<F2_DIM0; i++) for(j=0; j<F2_DIM1; j++) data[i][j]=i*10+j; /* Write data to the new dataset */ ret = H5Dwrite(dataset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, data); CHECK(ret, FAIL, "H5Dwrite"); if(ret_did != NULL) *ret_did = dataset_id; /* Terminate access to the data space. */ ret = H5Sclose(dataspace_id); CHECK(ret, FAIL, "H5Sclose"); } /* Create a group in the second file open */ { hid_t gid1, gid2, gid3; gid1 = H5Gcreate(fid2, "/group", 0); CHECK(gid1, FAIL, "H5Gcreate"); if(ret_gid1 != NULL) *ret_gid1 = gid1; gid2 = H5Gopen(fid2, "/group"); CHECK(gid2, FAIL, "H5Gopen"); if(ret_gid2 != NULL) *ret_gid2 = gid2; gid3 = H5Gopen(fid2, "/group"); CHECK(gid3, FAIL, "H5Gopen"); if(ret_gid3 != NULL) *ret_gid3 = gid3; } /* Check reference counts of file IDs and opened object IDs. * The verification is hard-coded. If in any case, this testing * is changed, remember to check this part and update the macros. */ { oid_count = H5Fget_obj_count(fid1, H5F_OBJ_ALL); CHECK(oid_count, FAIL, "H5Fget_obj_count"); VERIFY(oid_count, OBJ_ID_COUNT_6, "H5Fget_obj_count"); oid_count = H5Fget_obj_count(fid1, H5F_OBJ_DATASET|H5F_OBJ_GROUP|H5F_OBJ_DATATYPE|H5F_OBJ_ATTR); CHECK(oid_count, FAIL, "H5Fget_obj_count"); VERIFY(oid_count, OBJ_ID_COUNT_4, "H5Fget_obj_count"); oid_count = H5Fget_obj_count(fid2, H5F_OBJ_ALL); CHECK(oid_count, FAIL, "H5Fget_obj_count"); VERIFY(oid_count, OBJ_ID_COUNT_6, "H5Fget_obj_count"); oid_count = H5Fget_obj_count(fid2, H5F_OBJ_DATASET|H5F_OBJ_GROUP|H5F_OBJ_DATATYPE|H5F_OBJ_ATTR); CHECK(oid_count, FAIL, "H5Fget_obj_count"); VERIFY(oid_count, OBJ_ID_COUNT_4, "H5Fget_obj_count"); } } /**************************************************************** ** ** test_get_file_id(): Test H5Iget_file_id() ** *****************************************************************/ static void test_get_file_id(void) { hid_t fid, fid2, fid3; hid_t datatype_id, dataset_id, dataspace_id, group_id, attr_id; hid_t plist; hsize_t dims[F2_RANK]; herr_t ret; /* Create a file */ fid = H5Fcreate(FILE4, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT); CHECK(fid, FAIL, "H5Fcreate"); /* Test H5Iget_file_id() */ check_file_id(fid, fid); /* Create a group in the file. Make a duplicated file ID from the group. * And close this duplicated ID */ group_id = H5Gcreate(fid, GRP_NAME, 0); CHECK(group_id, FAIL, "H5Gcreate"); /* Test H5Iget_file_id() */ check_file_id(fid, group_id); /* Close the file and get file ID from the group ID */ ret = H5Fclose(fid); CHECK(ret, FAIL, "H5Fclose"); /* Test H5Iget_file_id() */ check_file_id(-1, group_id); ret = H5Gclose(group_id); CHECK(ret, FAIL, "H5Gclose"); /* Open the file again. Test H5Iget_file_id() */ fid = H5Fopen(FILE4, H5F_ACC_RDWR, H5P_DEFAULT); CHECK(fid, FAIL, "H5Fcreate"); group_id = H5Gopen(fid, GRP_NAME); CHECK(group_id, FAIL, "H5Gcreate"); /* Test H5Iget_file_id() */ check_file_id(fid, group_id); /* Open the file for second time. Test H5Iget_file_id() */ fid3 = H5Freopen(fid); CHECK(fid3, FAIL, "H5Freopen"); /* Test H5Iget_file_id() */ check_file_id(fid3, fid3); ret = H5Fclose(fid3); CHECK(ret, FAIL, "H5Fclose"); /* Create a dataset in the group. Make a duplicated file ID from the * dataset. And close this duplicated ID. */ dims[0] = F2_DIM0; dims[1] = F2_DIM1; dataspace_id = H5Screate_simple(F2_RANK, dims, NULL); CHECK(dataspace_id, FAIL, "H5Screate_simple"); dataset_id = H5Dcreate(group_id, DSET_NAME, H5T_NATIVE_INT, dataspace_id, H5P_DEFAULT); CHECK(dataset_id, FAIL, "H5Dcreate"); /* Test H5Iget_file_id() */ check_file_id(fid, dataset_id); /* Create an attribute for the dataset. Make a duplicated file ID from * this attribute. And close it. */ attr_id=H5Acreate(dataset_id,ATTR_NAME,H5T_NATIVE_INT,dataspace_id,H5P_DEFAULT); CHECK(ret, FAIL, "H5Acreate"); /* Test H5Iget_file_id() */ check_file_id(fid, attr_id); /* Create a named datatype. Make a duplicated file ID from * this attribute. And close it. */ datatype_id=H5Tcopy(H5T_NATIVE_INT); CHECK(ret, FAIL, "H5Acreate"); ret = H5Tcommit(fid, TYPE_NAME, datatype_id); CHECK(ret, FAIL, "H5Tcommit"); /* Test H5Iget_file_id() */ check_file_id(fid, datatype_id); /* Create a property list and try to get file ID from it. * Supposed to fail. */ plist = H5Pcreate(H5P_FILE_ACCESS); CHECK(plist, FAIL, "H5Pcreate"); H5E_BEGIN_TRY { fid2 = H5Iget_file_id(plist); } H5E_END_TRY; VERIFY(fid2, FAIL, "H5Iget_file_id"); /* Close objects */ ret = H5Tclose(datatype_id); CHECK(ret, FAIL, "H5Tclose"); ret = H5Aclose(attr_id); CHECK(ret, FAIL, "H5Aclose"); ret = H5Sclose(dataspace_id); CHECK(ret, FAIL, "H5Sclose"); ret = H5Dclose(dataset_id); CHECK(ret, FAIL, "H5Dclose"); ret = H5Gclose(group_id); CHECK(ret, FAIL, "H5Gclose"); ret = H5Fclose(fid); CHECK(ret, FAIL, "H5Fclose"); } /**************************************************************** ** ** check_file_id(): Internal function of test_get_file_id() ** *****************************************************************/ static void check_file_id(hid_t fid, hid_t object_id) { hid_t new_fid; herr_t ret; /* Return a duplicated file ID even not expecting user to do it. * And close this duplicated ID */ new_fid = H5Iget_file_id(object_id); if(fid >=0) VERIFY(new_fid, fid, "H5Iget_file_id"); else CHECK(new_fid, FAIL, "H5Iget_file_id"); ret = H5Fclose(new_fid); CHECK(ret, FAIL, "H5Fclose"); } /**************************************************************** ** ** test_obj_count_and_id(): test object count and ID list functions. ** ****************************************************************/ static void test_obj_count_and_id(hid_t fid1, hid_t fid2, hid_t did, hid_t gid1, hid_t gid2, hid_t gid3) { hid_t fid3, fid4; int oid_count; herr_t ret; /* Create two new files */ fid3 = H5Fcreate(FILE2, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT); CHECK(fid3, FAIL, "H5Fcreate"); fid4 = H5Fcreate(FILE3, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT); CHECK(fid4, FAIL, "H5Fcreate"); /* test object count of all files IDs open */ oid_count = H5Fget_obj_count(H5F_OBJ_ALL, H5F_OBJ_FILE); CHECK(oid_count, FAIL, "H5Fget_obj_count"); VERIFY(oid_count, OBJ_ID_COUNT_4, "H5Fget_obj_count"); /* test object count of all datasets open */ oid_count = H5Fget_obj_count(H5F_OBJ_ALL, H5F_OBJ_DATASET); CHECK(oid_count, FAIL, "H5Fget_obj_count"); VERIFY(oid_count, OBJ_ID_COUNT_1, "H5Fget_obj_count"); /* test object count of all groups open */ oid_count = H5Fget_obj_count(H5F_OBJ_ALL, H5F_OBJ_GROUP); CHECK(oid_count, FAIL, "H5Fget_obj_count"); VERIFY(oid_count, OBJ_ID_COUNT_3, "H5Fget_obj_count"); /* test object count of all named datatypes open */ oid_count = H5Fget_obj_count(H5F_OBJ_ALL, H5F_OBJ_DATATYPE); CHECK(oid_count, FAIL, "H5Fget_obj_count"); VERIFY(oid_count, OBJ_ID_COUNT_0, "H5Fget_obj_count"); /* test object count of all attributes open */ oid_count = H5Fget_obj_count(H5F_OBJ_ALL, H5F_OBJ_ATTR); CHECK(oid_count, FAIL, "H5Fget_obj_count"); VERIFY(oid_count, OBJ_ID_COUNT_0, "H5Fget_obj_count"); /* test object count of all objects currently open */ oid_count = H5Fget_obj_count(H5F_OBJ_ALL, H5F_OBJ_ALL); CHECK(oid_count, FAIL, "H5Fget_obj_count"); VERIFY(oid_count, OBJ_ID_COUNT_8, "H5Fget_obj_count"); { hid_t *oid_list; int i; H5I_type_t id_type; oid_list = (hid_t*)calloc((size_t)oid_count, sizeof(hid_t)); if(oid_list != NULL) { ret = H5Fget_obj_ids(H5F_OBJ_ALL, H5F_OBJ_ALL, oid_count, oid_list); CHECK(ret, FAIL, "H5Fget_obj_ids"); } for(i=0; i<oid_count; i++) { id_type = H5Iget_type(oid_list[i]); switch(id_type) { case H5I_FILE: if(oid_list[i]!=fid1 && oid_list[i]!=fid2 && oid_list[i]!=fid3 && oid_list[i]!=fid4) { ret = FAIL; CHECK(ret, FAIL, "H5Fget_obj_ids"); } break; case H5I_GROUP: if(oid_list[i]!=gid1 && oid_list[i]!=gid2 && oid_list[i]!=gid3) { ret = FAIL; CHECK(ret, FAIL, "H5Fget_obj_ids"); } break; case H5I_DATASET: VERIFY(oid_list[i], did, "H5Fget_obj_ids"); break; default: ret = FAIL; CHECK(ret, FAIL, "H5Fget_obj_ids"); } } free(oid_list); } /* close the two new files */ ret = H5Fclose(fid3); CHECK(ret, FAIL, "H5Fclose"); ret = H5Fclose(fid4); CHECK(ret, FAIL, "H5Fclose"); } /**************************************************************** ** ** test_file_perm(): low-level file test routine. ** This test verifies that a file can be opened for both ** read-only and read-write access and things will be handled ** appropriately. ** *****************************************************************/ static void test_file_perm(void) { hid_t file; /* File opened with read-write permission */ hid_t filero; /* Same file opened with read-only permission */ hid_t dspace; /* Dataspace ID */ hid_t dset; /* Dataset ID */ herr_t ret; /* Output message about test being performed */ MESSAGE(5, ("Testing Low-Level File Permissions\n")); dspace = H5Screate(H5S_SCALAR); CHECK(dspace, FAIL, "H5Screate"); /* Create the file (with read-write permission) */ file = H5Fcreate(FILE2, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT); CHECK(file, FAIL, "H5Fcreate"); /* Create a dataset with the read-write file handle */ dset = H5Dcreate(file, F2_DSET, H5T_NATIVE_INT, dspace, H5P_DEFAULT); CHECK(dset, FAIL, "H5Dcreate"); ret = H5Dclose(dset); CHECK(ret, FAIL, "H5Dclose"); /* Open the file (with read-only permission) */ filero = H5Fopen(FILE2, H5F_ACC_RDONLY, H5P_DEFAULT); CHECK(filero, FAIL, "H5Fopen"); /* Create a dataset with the read-only file handle (should fail) */ H5E_BEGIN_TRY { dset = H5Dcreate(filero, F2_DSET, H5T_NATIVE_INT, dspace, H5P_DEFAULT); } H5E_END_TRY; VERIFY(dset, FAIL, "H5Dcreate"); if(dset!=FAIL) { ret = H5Dclose(dset); CHECK(ret, FAIL, "H5Dclose"); } /* end if */ ret = H5Fclose(filero); CHECK(ret, FAIL, "H5Fclose"); ret = H5Fclose(file); CHECK(ret, FAIL, "H5Fclose"); ret = H5Sclose(dspace); CHECK(ret, FAIL, "H5Sclose"); } /* end test_file_perm() */ /**************************************************************** ** ** test_file_freespace(): low-level file test routine. ** This test checks the free space available in a file in various ** situations. ** *****************************************************************/ static void test_file_freespace(void) { hid_t file; /* File opened with read-write permission */ hssize_t free_space; /* Amount of free space in file */ hid_t dspace; /* Dataspace ID */ hid_t dset; /* Dataset ID */ hid_t dcpl; /* Dataset creation property list */ unsigned u; /* Local index variable */ char name[32]; /* Dataset name */ herr_t ret; /* Output message about test being performed */ MESSAGE(5, ("Testing Low-Level File Free Space\n")); /* Create the file (with read-write permission) */ file = H5Fcreate(FILE1, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT); CHECK(file, FAIL, "H5Fcreate"); /* Check that the free space is 0 */ free_space = H5Fget_freespace(file); CHECK(free_space, FAIL, "H5Fget_freespace"); VERIFY(free_space, 0, "H5Fget_freespace"); /* Create dataspace for datasets */ dspace = H5Screate(H5S_SCALAR); CHECK(dspace, FAIL, "H5Screate"); /* Create a dataset creation property list */ dcpl = H5Pcreate(H5P_DATASET_CREATE); CHECK(dcpl, FAIL, "H5Pcreate"); /* Set the space allocation time to early */ ret = H5Pset_alloc_time(dcpl,H5D_ALLOC_TIME_EARLY); CHECK(ret, FAIL, "H5Pset_alloc_time"); /* Create datasets in file */ for(u=0; u<10; u++) { sprintf(name,"Dataset %u",u); dset = H5Dcreate(file, name, H5T_STD_U32LE, dspace, dcpl); CHECK(dset, FAIL, "H5Dcreate"); ret = H5Dclose(dset); CHECK(ret, FAIL, "H5Dclose"); } /* end for */ /* Close dataspace */ ret = H5Sclose(dspace); CHECK(ret, FAIL, "H5Sclose"); /* Close dataset creation property list */ ret=H5Pclose(dcpl); CHECK(ret, FAIL, "H5Pclose"); /* Check that there is the right amount of free space in the file */ free_space = H5Fget_freespace(file); CHECK(free_space, FAIL, "H5Fget_freespace"); #ifdef H5_HAVE_LARGE_HSIZET VERIFY(free_space, 168, "H5Fget_freespace"); #else /* H5_HAVE_LARGE_HSIZET */ VERIFY(free_space, 76, "H5Fget_freespace"); #endif /* H5_HAVE_LARGE_HSIZET */ /* Delete datasets in file */ for(u=0; u<10; u++) { sprintf(name,"Dataset %u",u); ret = H5Gunlink(file, name); CHECK(ret, FAIL, "H5Gunlink"); } /* end for */ /* Check that there is the right amount of free space in the file */ free_space = H5Fget_freespace(file); CHECK(free_space, FAIL, "H5Fget_freespace"); #ifdef H5_HAVE_LARGE_HSIZET VERIFY(free_space, 3584, "H5Fget_freespace"); #else /* H5_HAVE_LARGE_HSIZET */ VERIFY(free_space, 3428, "H5Fget_freespace"); #endif /* H5_HAVE_LARGE_HSIZET */ /* Close file */ ret = H5Fclose(file); CHECK(ret, FAIL, "H5Fclose"); } /* end test_file_freespace() */ /**************************************************************** ** ** test_file(): Main low-level file I/O test routine. ** ****************************************************************/ void test_file(void) { /* Output message about test being performed */ MESSAGE(5, ("Testing Low-Level File I/O\n")); test_file_create(); /* Test file creation(also creation templates)*/ test_file_open(); /* Test file opening */ #ifndef H5_NO_SHARED_WRITING test_file_close(); /* Test file close behavior */ #endif /* H5_NO_SHARED_WRITING */ test_get_file_id(); /* Test H5Iget_file_id */ test_file_perm(); /* Test file access permissions */ test_file_freespace(); /* Test file free space information */ } /* test_file() */ /*------------------------------------------------------------------------- * Function: cleanup_file * * Purpose: Cleanup temporary test files * * Return: none * * Programmer: Albert Cheng * July 2, 1998 * * Modifications: * *------------------------------------------------------------------------- */ void cleanup_file(void) { remove(FILE1); remove(FILE2); remove(FILE3); }