# Makefile.in generated by automake 1.6.3 from Makefile.am. # @configure_input@ # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Copyright by the Board of Trustees of the University of Illinois. # All rights reserved. # # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the files COPYING and Copyright.html. COPYING can be found at the root # of the source code distribution tree; Copyright.html can be found at the # root level of an installed copy of the electronic HDF5 document set and # is linked from the top-level documents page. It can also be found at # http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have # access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. # # hdf5 Parallel Library Test Makefile(.in) # SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ oldincludedir = /usr/include pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ EXEEXT = @EXEEXT@ OBJEXT = @OBJEXT@ PATH_SEPARATOR = @PATH_SEPARATOR@ # Install directories that automake doesn't know about includedir = $(exec_prefix)/include # Set the paths for autotools to be correct on heping. # Ideally, these tools should never be needed during the build. ACLOCAL = /usr/bin/aclocal AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf AUTOMAKE = /usr/bin/automake AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ AWK = @AWK@ BUILD_PDB2HDF = @BUILD_PDB2HDF@ BYTESEX = @BYTESEX@ CC = @CC@ CC_VERSION = @CC_VERSION@ CONFIG_DATE = @CONFIG_DATE@ CONFIG_MODE = @CONFIG_MODE@ CONFIG_USER = @CONFIG_USER@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ DEBUG_PKG = @DEBUG_PKG@ DEFAULT_LIBS = @DEFAULT_LIBS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DYNAMIC_DIRS = @DYNAMIC_DIRS@ ECHO = @ECHO@ F77 = @F77@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ FFLAGS = @FFLAGS@ FILTERS = @FILTERS@ FSEARCH_DIRS = @FSEARCH_DIRS@ GASS = @GASS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HDF5_INTERFACES = @HDF5_INTERFACES@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ HSIZET = @HSIZET@ HSIZE_T = @HSIZE_T@ HSSIZE_T = @HSSIZE_T@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LT_STATIC_EXEC = @LT_STATIC_EXEC@ MAINT = @MAINT@ MPE = @MPE@ OBJDUMP = @OBJDUMP@ OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ PACKAGE = @PACKAGE@ PARALLEL = @PARALLEL@ PERL = @PERL@ PTHREAD = @PTHREAD@ RANLIB = @RANLIB@ ROOT = @ROOT@ RUNPARALLEL = @RUNPARALLEL@ RUNSERIAL = @RUNSERIAL@ R_INTEGER = @R_INTEGER@ R_LARGE = @R_LARGE@ SEARCH = @SEARCH@ SETX = @SETX@ SIZE_T = @SIZE_T@ SRB = @SRB@ SSL = @SSL@ STATIC_SHARED = @STATIC_SHARED@ STRIP = @STRIP@ TESTGASS = @TESTGASS@ TESTPARALLEL = @TESTPARALLEL@ TESTSRB = @TESTSRB@ TRACE_API = @TRACE_API@ USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ USE_FILTER_NBIT = @USE_FILTER_NBIT@ USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ USE_FILTER_SZIP = @USE_FILTER_SZIP@ VERSION = @VERSION@ am__include = @am__include@ am__quote = @am__quote@ install_sh = @install_sh@ # Shell commands used in Makefiles RM = rm -f CP = cp # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la LIBH5TEST = $(top_builddir)/test/libh5test.la LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la docdir = $(exec_prefix)/doc # Scripts used to build examples H5CC = $(bindir)/h5cc H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc # Make sure that these variables are exported to the Makefiles F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/test # Test programs and scripts. These are our main targets. # TEST_PROG_PARA = t_mpi t_fphdf5 testphdf5 TEST_SCRIPT = testph5.sh check_PROGRAMS = $(TEST_PROG_PARA) check_SCRIPTS = $(TEST_SCRIPT) testphdf5_SOURCES = testphdf5.c t_dset.c t_file.c t_mdset.c t_ph5basic.c \ t_coll_chunk.c t_span_tree.c # The tests all depend on the hdf5 library and the test library LDADD = $(LIBHDF5) $(LIBH5TEST) # Temporary files # MPItest.h5 is from t_mpi # Para*.h5 are from testphdf # *.clog are from MPE option MOSTLYCLEANFILES = MPItest.h5 Para*.h5 *.clog DISTCLEANFILES = go Makefile testph5.sh # Automake needs to be taught how to build lib, progs, and tests targets. # These will be filled in automatically for the most part (e.g., # lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and # EXTRA_TEST variables are supplied to allow the user to force targets to # be built at certain times. LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) subdir = testpar mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/src/H5config.h CONFIG_CLEAN_FILES = testph5.sh check_PROGRAMS = t_mpi$(EXEEXT) t_fphdf5$(EXEEXT) testphdf5$(EXEEXT) t_fphdf5_SOURCES = t_fphdf5.c t_fphdf5_OBJECTS = t_fphdf5.$(OBJEXT) t_fphdf5_LDADD = $(LDADD) t_fphdf5_DEPENDENCIES = $(top_builddir)/src/libhdf5.la \ $(top_builddir)/test/libh5test.la t_fphdf5_LDFLAGS = t_mpi_SOURCES = t_mpi.c t_mpi_OBJECTS = t_mpi.$(OBJEXT) t_mpi_LDADD = $(LDADD) t_mpi_DEPENDENCIES = $(top_builddir)/src/libhdf5.la \ $(top_builddir)/test/libh5test.la t_mpi_LDFLAGS = am_testphdf5_OBJECTS = testphdf5.$(OBJEXT) t_dset.$(OBJEXT) \ t_file.$(OBJEXT) t_mdset.$(OBJEXT) t_ph5basic.$(OBJEXT) \ t_coll_chunk.$(OBJEXT) t_span_tree.$(OBJEXT) testphdf5_OBJECTS = $(am_testphdf5_OBJECTS) testphdf5_LDADD = $(LDADD) testphdf5_DEPENDENCIES = $(top_builddir)/src/libhdf5.la \ $(top_builddir)/test/libh5test.la testphdf5_LDFLAGS = DEFS = @DEFS@ DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles @AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/t_coll_chunk.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/t_dset.Po ./$(DEPDIR)/t_file.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/t_fphdf5.Po ./$(DEPDIR)/t_mdset.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/t_mpi.Po ./$(DEPDIR)/t_ph5basic.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/t_span_tree.Po ./$(DEPDIR)/testphdf5.Po COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ CFLAGS = @CFLAGS@ DIST_SOURCES = t_fphdf5.c t_mpi.c $(testphdf5_SOURCES) DIST_COMMON = Makefile.am Makefile.in testph5.sh.in SOURCES = t_fphdf5.c t_mpi.c $(testphdf5_SOURCES) all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && \ $(AUTOMAKE) --foreign testpar/Makefile Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) testph5.sh: $(top_builddir)/config.status testph5.sh.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ clean-checkPROGRAMS: @list='$(check_PROGRAMS)'; for p in $$list; do \ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ echo " rm -f $$p $$f"; \ rm -f $$p $$f ; \ done t_fphdf5$(EXEEXT): $(t_fphdf5_OBJECTS) $(t_fphdf5_DEPENDENCIES) @rm -f t_fphdf5$(EXEEXT) $(LINK) $(t_fphdf5_LDFLAGS) $(t_fphdf5_OBJECTS) $(t_fphdf5_LDADD) $(LIBS) t_mpi$(EXEEXT): $(t_mpi_OBJECTS) $(t_mpi_DEPENDENCIES) @rm -f t_mpi$(EXEEXT) $(LINK) $(t_mpi_LDFLAGS) $(t_mpi_OBJECTS) $(t_mpi_LDADD) $(LIBS) testphdf5$(EXEEXT): $(testphdf5_OBJECTS) $(testphdf5_DEPENDENCIES) @rm -f testphdf5$(EXEEXT) $(LINK) $(testphdf5_LDFLAGS) $(testphdf5_OBJECTS) $(testphdf5_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) core *.core distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_coll_chunk.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_dset.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_file.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_fphdf5.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_mdset.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_mpi.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_ph5basic.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_span_tree.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testphdf5.Po@am__quote@ distclean-depend: -rm -rf ./$(DEPDIR) .c.o: @AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ @AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< .c.obj: @AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ @AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ $(COMPILE) -c `cygpath -w $<` .c.lo: @AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ @AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< CCDEPMODE = @CCDEPMODE@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: ETAGS = etags ETAGSFLAGS = tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$tags$$unique" \ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) top_distdir = .. distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) @list='$(DISTFILES)'; for file in $$list; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkinstalldirs) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-am all-am: Makefile all-local installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-checkPROGRAMS clean-generic clean-libtool mostlyclean-am distclean: distclean-am distclean-am: clean-am distclean-compile distclean-depend \ distclean-generic distclean-libtool distclean-tags dvi: dvi-am dvi-am: info: info-am info-am: install-data-am: install-exec-am: install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool uninstall-am: uninstall-info-am .PHONY: GTAGS all all-am all-local check check-TESTS check-am clean \ clean-checkPROGRAMS clean-generic clean-libtool distclean \ distclean-compile distclean-depend distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am info \ info-am install install-am install-data install-data-am \ install-exec install-exec-am install-info install-info-am \ install-man install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool tags uninstall uninstall-am \ uninstall-info-am # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) build-tests: $(LIB) $(PROGS) $(TESTS) lib progs tests :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; \ for d in X $(SUBDIRS); do \ if test $$d != X -a $$d != .; then \ (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ fi; \ done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. install-doc uninstall-doc: @echo "Nothing to be done." # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # # Note that targets in TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test test _test: $(PROGS) $(TESTS) @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @for test in $(TEST_PROG) dummy; do \ if test $$test != dummy; then \ echo "============================"; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ else \ echo "Testing $$test $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ srcdir="$(srcdir)" \ $(RUNTEST) ./$$test $(TEST_FLAGS) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ break; \ echo ""; \ fi; \ done; \ test $$test = dummy || false @if test -n "$(TEST_PROG_PARA)"; then \ echo "**** Hint ****"; \ echo "Parallel test files reside in the current directory" \ "by default."; \ echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ echo " HDF5_PARAPREFIX=/PFS/user/me"; \ echo " export HDF5_PARAPREFIX"; \ echo " make check"; \ echo "**** end of Hint ****"; \ fi @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ echo "============================"; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ else \ echo "Testing $$test $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ srcdir="$(srcdir)" \ $(RUNPARALLEL) ./$$test $(TEST_FLAGS) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ break; \ echo ""; \ fi; \ done; \ test $$test = dummy || false @for test in $(TEST_SCRIPT) dummy; do \ if test $$test != dummy; then \ echo "============================"; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ else \ echo "Testing $$test $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ /bin/sh $$test $(TEST_FLAGS) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ break; \ echo ""; \ fi; \ done; \ test $$test = dummy || false @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi # Run test with different Virtual File Driver check-vfd: @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ echo "Testing Virtual File Driver $$vfd"; \ echo "============================"; \ HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check; \ fi; \ done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: