# Makefile.in generated by automake 1.9.5 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Copyright by the Board of Trustees of the University of Illinois. # All rights reserved. # # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the files COPYING and Copyright.html. COPYING can be found at the root # of the source code distribution tree; Copyright.html can be found at the # root level of an installed copy of the electronic HDF5 document set and # is linked from the top-level documents page. It can also be found at # http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have # access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. # # Tools HDF5 Makefile(.in) # srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/config/commence.am \ $(top_srcdir)/config/conclude.am subdir = tools ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/src/H5config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) # Set the paths for AFS installs of autotools for Linux machines # Ideally, these tools should never be needed during the build. ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake AWK = @AWK@ BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@ BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@ BUILD_FORTRAN_CONDITIONAL_FALSE = @BUILD_FORTRAN_CONDITIONAL_FALSE@ BUILD_FORTRAN_CONDITIONAL_TRUE = @BUILD_FORTRAN_CONDITIONAL_TRUE@ BUILD_HDF5_HL_CONDITIONAL_FALSE = @BUILD_HDF5_HL_CONDITIONAL_FALSE@ BUILD_HDF5_HL_CONDITIONAL_TRUE = @BUILD_HDF5_HL_CONDITIONAL_TRUE@ BUILD_PABLO_CONDITIONAL_FALSE = @BUILD_PABLO_CONDITIONAL_FALSE@ BUILD_PABLO_CONDITIONAL_TRUE = @BUILD_PABLO_CONDITIONAL_TRUE@ BUILD_PARALLEL_CONDITIONAL_FALSE = @BUILD_PARALLEL_CONDITIONAL_FALSE@ BUILD_PARALLEL_CONDITIONAL_TRUE = @BUILD_PARALLEL_CONDITIONAL_TRUE@ BUILD_PDB2HDF = @BUILD_PDB2HDF@ BUILD_PDB2HDF_CONDITIONAL_FALSE = @BUILD_PDB2HDF_CONDITIONAL_FALSE@ BUILD_PDB2HDF_CONDITIONAL_TRUE = @BUILD_PDB2HDF_CONDITIONAL_TRUE@ BYTESEX = @BYTESEX@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CC_VERSION = @CC_VERSION@ CFLAGS = @CFLAGS@ CONFIG_DATE = @CONFIG_DATE@ CONFIG_MODE = @CONFIG_MODE@ CONFIG_USER = @CONFIG_USER@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEBUG_PKG = @DEBUG_PKG@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DYNAMIC_DIRS = @DYNAMIC_DIRS@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ F77 = @F77@ # Make sure that these variables are exported to the Makefiles F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ FCFLAGS = @FCFLAGS@ FCLIBS = @FCLIBS@ FFLAGS = @FFLAGS@ FILTERS = @FILTERS@ FSEARCH_DIRS = @FSEARCH_DIRS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HDF5_INTERFACES = @HDF5_INTERFACES@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ HSIZET = @HSIZET@ HSIZE_T = @HSIZE_T@ HSSIZE_T = @HSSIZE_T@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_STATIC_EXEC = @LT_STATIC_EXEC@ MAINT = @MAINT@ MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ MPE = @MPE@ OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PTHREAD = @PTHREAD@ RANLIB = @RANLIB@ ROOT = @ROOT@ RUNPARALLEL = @RUNPARALLEL@ RUNSERIAL = @RUNSERIAL@ R_INTEGER = @R_INTEGER@ R_LARGE = @R_LARGE@ SEARCH = @SEARCH@ SETX = @SETX@ SET_MAKE = @SET_MAKE@ # Hardcode SHELL to be /bin/sh. Most machines have this shell, and # on at least one machine configure fails to detect its existence (janus). # Also, when HDF5 is configured on one machine but run on another, # configure's automatic SHELL detection may not work on the build machine. SHELL = /bin/sh SIZE_T = @SIZE_T@ STATIC_SHARED = @STATIC_SHARED@ STRIP = @STRIP@ TESTPARALLEL = @TESTPARALLEL@ TRACE_API = @TRACE_API@ USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ USE_FILTER_NBIT = @USE_FILTER_NBIT@ USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@ USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ USE_FILTER_SZIP = @USE_FILTER_SZIP@ VERSION = @VERSION@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_ct_FC = @ac_ct_FC@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ # Install directories that automake doesn't know about includedir = $(exec_prefix)/include infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ prefix = @prefix@ program_transform_name = @program_transform_name@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ # Shell commands used in Makefiles RM = rm -f CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. # We use RUNTESTS instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. RUNTESTS = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la LIBH5TEST = $(top_builddir)/test/libh5test.la LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la docdir = $(exec_prefix)/doc # Scripts used to build examples H5CC = $(bindir)/h5cc H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc # .chkexe and .chksh files are used to mark tests that have run successfully. MOSTLYCLEANFILES = *.chkexe *.chksh # All subdirectories SUBDIRS = lib h5dump h5diff h5ls misc gifconv h5import h5repack h5jam # Automake needs to be taught how to build lib, progs, and tests targets. # These will be filled in automatically for the most part (e.g., # lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and # EXTRA_TEST variables are supplied to allow the user to force targets to # be built at certain times. LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_) TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_) all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign tools/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(mkdir_p) $(distdir)/../config @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-recursive all-am: Makefile all-local installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-local check \ check-TESTS check-am clean clean-generic clean-libtool \ clean-recursive ctags ctags-recursive distclean \ distclean-generic distclean-libtool distclean-recursive \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-exec \ install-exec-am install-info install-info-am install-man \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ maintainer-clean-recursive mostlyclean mostlyclean-generic \ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am uninstall-info-am # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) build-tests: $(LIB) $(PROGS) $(TESTS) lib progs tests check-s check-p :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X -a $$d != .; then \ (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ fi; \ done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. install-doc uninstall-doc: @echo "Nothing to be done." # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # # Note that targets in TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test test _test: @$(MAKE) build-check-s @$(MAKE) build-check-p # Actual execution of check-s. build-check-s: $(LIB) $(PROGS) $(TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @$(MAKE) $(AM_MAKEFLAGS) _exec_check-s @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) # The .chkexe_ here is the "dummy" that prevents the target from being # empty if there are no tests in the current directory. $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $(@:.chkexe_=)$(EXEEXT); then \ echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \ else \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \ else \ echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ srcdir="$(srcdir)" \ $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ exit 1; \ echo ""; \ echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ fi # The .chksh_ here is the "dummy" that prevents the target from being # empty if there are no tests in the current directory. $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: @if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chksh_=.chksh) $(@:.chksh_=); then \ echo "No need to test $(@:.chksh_=) again."; \ else \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $(@:.chksh_=) $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $(@:.chksh_=) $(TEST_FLAGS)"; \ else \ echo "Testing $(@:.chksh_=) $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) \ && touch $(@:.chksh_=.chksh) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ exit 1; \ echo ""; \ echo "Finished testing $(@:.chksh_=) $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ fi # Actual execution of check-p. build-check-p: $(LIB) $(PROGS) $(TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @if test -n "$(TEST_PROG_PARA)"; then \ echo "**** Hint ****"; \ echo "Parallel test files reside in the current directory" \ "by default."; \ echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ echo " HDF5_PARAPREFIX=/PFS/user/me"; \ echo " export HDF5_PARAPREFIX"; \ echo " make check"; \ echo "**** end of Hint ****"; \ fi @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ RUNTESTS="$(RUNPARALLEL)"; \ fi; \ done; \ test $$test = dummy || false @for test in $(TEST_SCRIPT_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \ fi; \ done; \ test $$test = dummy || false @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi # Run test with different Virtual File Driver check-vfd: @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ echo "Testing Virtual File Driver $$vfd"; \ echo "============================"; \ HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check; \ fi; \ done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: