#! /bin/sh
#
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5.  The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html.  COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page.  It can also be found at
# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
# access to either file, you may request a copy from help@hdfgroup.org.
#
# Tests for the h5dump tool with packed bits type files

# Determine which filters are available
USE_FILTER_SZIP="@USE_FILTER_SZIP@"
USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@"
USE_FILTER_SHUFFLE="@USE_FILTER_SHUFFLE@"
USE_FILTER_FLETCHER32="@USE_FILTER_FLETCHER32@"
USE_FILTER_NBIT="@USE_FILTER_NBIT@"
USE_FILTER_SCALEOFFSET="@USE_FILTER_SCALEOFFSET@"

TESTNAME=h5dump
EXIT_SUCCESS=0
EXIT_FAILURE=1

DUMPER=h5dump                     # The tool name
DUMPER_BIN=`pwd`/$DUMPER          # The path of the tool binary

H5DIFF=../h5diff/h5diff           # The h5diff tool name 
H5DIFF_BIN=`pwd`/$H5DIFF          # The path of the h5diff  tool binary

H5IMPORT=../h5import/h5import     # The h5import tool name 
H5IMPORT_BIN=`pwd`/$H5IMPORT      # The path of the h5import  tool binary


CMP='cmp -s'
DIFF='diff -c'
CP='cp'
DIRNAME='dirname'
LS='ls'
AWK='awk'

nerrors=0
verbose=yes

# The build (current) directory might be different than the source directory.
if test -z "$srcdir"; then
   srcdir=.
fi
# source dirs
SRC_TOOLS="$srcdir/../"

SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
# testfiles source dirs for tools
SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES"
SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES"
SRC_H5DUMP_ERRORFILES="$srcdir/errfiles"
SRC_H5DIFF_TESTFILES="$SRC_TOOLS/h5diff/testfiles"
SRC_H5COPY_TESTFILES="$SRC_TOOLS/h5copy/testfiles"
SRC_H5REPACK_TESTFILES="$SRC_TOOLS/h5repack/testfiles"
SRC_H5JAM_TESTFILES="$SRC_TOOLS/h5jam/testfiles"
SRC_H5STAT_TESTFILES="$SRC_TOOLS/h5stat/testfiles"
SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/h5import/testfiles"

TESTDIR=./testfiles
test -d $TESTDIR || mkdir $TESTDIR

######################################################################
# test files
# --------------------------------------------------------------------
# All the test files copy from source directory to test directory
# NOTE: Keep this framework to add/remove test files.
#       Any test files from other tools can be used in this framework.
#       This list are also used for checking exist.
#       Comment '#' without space can be used.
# --------------------------------------------------------------------
LIST_HDF5_TEST_FILES="
$SRC_H5DUMP_TESTFILES/packedbits.h5
"

LIST_OTHER_TEST_FILES="
$SRC_H5DUMP_TESTFILES/tnofilename-with-packed-bits.ddl
$SRC_H5DUMP_TESTFILES/tpbitsArray.ddl
$SRC_H5DUMP_TESTFILES/tpbitsCompound.ddl
$SRC_H5DUMP_TESTFILES/tpbitsIncomplete.ddl
$SRC_H5DUMP_TESTFILES/tpbitsLengthExceeded.ddl
$SRC_H5DUMP_TESTFILES/tpbitsCharLengthExceeded.ddl
$SRC_H5DUMP_TESTFILES/tpbitsIntLengthExceeded.ddl
$SRC_H5DUMP_TESTFILES/tpbitsLongLengthExceeded.ddl
$SRC_H5DUMP_TESTFILES/tpbitsLengthPositive.ddl
$SRC_H5DUMP_TESTFILES/tpbitsMax.ddl
$SRC_H5DUMP_TESTFILES/tpbitsMaxExceeded.ddl
$SRC_H5DUMP_TESTFILES/tpbitsOffsetExceeded.ddl
$SRC_H5DUMP_TESTFILES/tpbitsCharOffsetExceeded.ddl
$SRC_H5DUMP_TESTFILES/tpbitsIntOffsetExceeded.ddl
$SRC_H5DUMP_TESTFILES/tpbitsLongOffsetExceeded.ddl
$SRC_H5DUMP_TESTFILES/tpbitsOffsetNegative.ddl
$SRC_H5DUMP_TESTFILES/tpbitsOverlapped.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSigned.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsigned.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSignedInt.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsignedInt.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSignedLong.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLong.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLong.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLong.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSignedWhole.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsignedWhole.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSignedIntWhole.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsignedIntWhole.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSignedLongWhole.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongWhole.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLongWhole.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLongWhole.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLongWhole1.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLongWhole1.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLongWhole63.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLongWhole63.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSigned4.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsigned4.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSignedInt8.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsignedInt8.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSignedLong16.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLong16.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLong32.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLong32.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSigned2.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsigned2.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSignedInt4.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsignedInt4.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSignedLong8.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLong8.ddl
$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLong16.ddl
$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLong16.ddl
"

LIST_ERROR_TEST_FILES="
${SRC_H5DUMP_ERRORFILES}/tnofilename-with-packed-bits.err
${SRC_H5DUMP_ERRORFILES}/tpbitsCharLengthExceeded.err
${SRC_H5DUMP_ERRORFILES}/tpbitsCharOffsetExceeded.err
${SRC_H5DUMP_ERRORFILES}/tpbitsIncomplete.err
${SRC_H5DUMP_ERRORFILES}/tpbitsIntLengthExceeded.err
${SRC_H5DUMP_ERRORFILES}/tpbitsIntOffsetExceeded.err
${SRC_H5DUMP_ERRORFILES}/tpbitsLengthExceeded.err
${SRC_H5DUMP_ERRORFILES}/tpbitsLengthPositive.err
${SRC_H5DUMP_ERRORFILES}/tpbitsLongLengthExceeded.err
${SRC_H5DUMP_ERRORFILES}/tpbitsLongOffsetExceeded.err
${SRC_H5DUMP_ERRORFILES}/tpbitsMaxExceeded.err
${SRC_H5DUMP_ERRORFILES}/tpbitsOffsetExceeded.err
${SRC_H5DUMP_ERRORFILES}/tpbitsOffsetNegative.err
"

#
# copy test files and expected output files from source dirs to test dir
#
COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES $LIST_ERROR_TEST_FILES"

COPY_TESTFILES_TO_TESTDIR()
{
    # copy test files. Used -f to make sure get a new copy
    for tstfile in $COPY_TESTFILES
    do
        # ignore '#' comment
        echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
        RET=$?
        if [ $RET -eq 1 ]; then
            # skip cp if srcdir is same as destdir
            # this occurs when build/test performed in source dir and
            # make cp fail
            SDIR=`$DIRNAME $tstfile`
            INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
            INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
            if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
    	        $CP -f $tstfile $TESTDIR
                if [ $? -ne 0 ]; then
                    echo "Error: FAILED to copy $tstfile ."
                
                    # Comment out this to CREATE expected file
                    exit $EXIT_FAILURE
                fi
            fi
        fi
    done
}

# Print a line-line message left justified in a field of 70 characters
# beginning with the word "Testing".
#
TESTING() {
   SPACES="                                                               "
   echo "Testing $* $SPACES" | cut -c1-70 | tr -d '\012'
}

# Source in the output filter function definitions.
. $srcdir/../../bin/output_filter.sh

# Run a test and print PASS or *FAIL*.  If a test fails then increment
# the `nerrors' global variable and (if $verbose is set) display the
# difference between the actual output and the expected output. The
# expected output is given as the first argument to this function and
# the actual output file is calculated by replacing the `.ddl' with
# `.out'.  The actual output is not removed if $HDF5_NOCLEANUP has a
# non-zero value.
#
TOOLTEST() {
    expect="$TESTDIR/$1"
    actual="$TESTDIR/`basename $1 .ddl`.out"
    actual_err="$TESTDIR/`basename $1 .ddl`.err"
    actual_sav=${actual}-sav
    actual_err_sav=${actual_err}-sav
    shift

    # Run test.
    TESTING $DUMPER $@
    (
    cd $TESTDIR
      $RUNSERIAL $DUMPER_BIN "$@"
    ) >$actual 2>$actual_err

    # save actual and actual_err in case they are needed later.
    cp $actual $actual_sav
    STDOUT_FILTER $actual
    cp $actual_err $actual_err_sav
    STDERR_FILTER $actual_err
    cat $actual_err >> $actual

  if [ ! -f $expect ]; then
    # Create the expect file if it doesn't yet exist.
     echo " CREATED"
     cp $actual $expect
    elif $CMP $expect $actual; then
     echo " PASSED"
    else
     echo "*FAILED*"
     echo "    Expected result (*.ddl) differs from actual result (*.out)"
   nerrors="`expr $nerrors + 1`"
   test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
    fi

    # Clean up output file
    if test -z "$HDF5_NOCLEANUP"; then
   rm -f $actual $actual_err $actual_sav $actual_err_sav $actual_ext
    fi

}


# same as TOOLTEST1 but compares generated file to expected output
#                   and compares the generated data file to the expected data file
# used for the binary tests that expect a full path in -o without -b
TOOLTEST2() {

    expectdata="$TESTDIR/$1"
    expect="$TESTDIR/`basename $1 .exp`.ddl"
    actualdata="$TESTDIR/`basename $1 .exp`.txt"
    actual="$TESTDIR/`basename $1 .exp`.out"
    actual_err="$TESTDIR/`basename $1 .exp`.err"
    shift

    # Run test.
    TESTING $DUMPER $@
    (
      cd $TESTDIR
      $RUNSERIAL $DUMPER_BIN "$@"
    ) >$actual 2>$actual_err
    cat $actual_err >> $actual

    if [ ! -f $expect ]; then
    # Create the expect file if it doesn't yet exist.
     echo " CREATED"
     cp $actual $expect
    elif $CMP $expect $actual; then
      if [ ! -f $expectdata ]; then
      # Create the expect data file if it doesn't yet exist.
        echo " CREATED"
        cp $actualdata $expectdata
      elif $CMP $expectdata $actualdata; then
        echo " PASSED"
      else
        echo "*FAILED*"
        echo "    Expected datafile (*.exp) differs from actual datafile (*.txt)"
        nerrors="`expr $nerrors + 1`"
        test yes = "$verbose" && $DIFF $expectdata $actualdata |sed 's/^/    /'
      fi
    else
     echo "*FAILED*"
     echo "    Expected result (*.ddl) differs from actual result (*.out)"
     nerrors="`expr $nerrors + 1`"
     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
    fi
    
    # Clean up output file
    if test -z "$HDF5_NOCLEANUP"; then
     rm -f $actual $actualdata $actual_err
    fi

}

# same as TOOLTEST but filters error stack outp
# Extract file name, line number, version and thread IDs because they may be different
TOOLTEST3() {

    expect="$TESTDIR/$1"
    actual="$TESTDIR/`basename $1 .ddl`.out"
    actual_err="$TESTDIR/`basename $1 .ddl`.err"
    actual_ext="$TESTDIR/`basename $1 .ddl`.ext"
    actual_sav=${actual}-sav
    actual_err_sav=${actual_err}-sav
    shift

    # Run test.
    TESTING $DUMPER $@
    (
      cd $TESTDIR
      $RUNSERIAL $DUMPER_BIN "$@"
    ) >$actual 2>$actual_err

    # save actual and actual_err in case they are needed later.
    cp $actual $actual_sav
    STDOUT_FILTER $actual
    cp $actual_err $actual_err_sav
    STDERR_FILTER $actual_err

    # Extract file name, line number, version and thread IDs because they may be different
    sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \
        -e 's/line [0-9]*/line (number)/' \
        -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \
        -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \
        -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \
        -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \
     $actual_err > $actual_ext
    cat $actual_ext >> $actual

    if [ ! -f $expect ]; then
    # Create the expect file if it doesn't yet exist.
     echo " CREATED"
     cp $actual $expect
    elif $CMP $expect $actual; then
     echo " PASSED"
    else
     echo "*FAILED*"
     echo "    Expected result (*.ddl) differs from actual result (*.out)"
     nerrors="`expr $nerrors + 1`"
     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
    fi

    # Clean up output file
    if test -z "$HDF5_NOCLEANUP"; then
   rm -f $actual $actual_err $actual_sav $actual_err_sav
    fi

}

# same as TOOLTEST3 but filters error stack output and compares to an error file
# Extract file name, line number, version and thread IDs because they may be different
TOOLTEST4() {

    expect="$TESTDIR/$1"
    expect_err="$TESTDIR/`basename $1 .ddl`.err"
    actual="$TESTDIR/`basename $1 .ddl`.out"
    actual_err="$TESTDIR/`basename $1 .ddl`.oerr"
    actual_ext="$TESTDIR/`basename $1 .ddl`.ext"
    actual_sav=${actual}-sav
    actual_err_sav=${actual_err}-sav
    shift

    # Run test.
    TESTING $DUMPER $@
    (
      cd $TESTDIR
      $RUNSERIAL $DUMPER_BIN "$@"
    ) >$actual 2>$actual_err

    # save actual and actual_err in case they are needed later.
    cp $actual $actual_sav
    STDOUT_FILTER $actual
    cp $actual_err $actual_err_sav
    STDERR_FILTER $actual_err

    # Extract file name, line number, version and thread IDs because they may be different
    sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \
        -e 's/line [0-9]*/line (number)/' \
        -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \
        -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \
        -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \
        -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \
     $actual_err > $actual_ext
    #cat $actual_ext >> $actual

    if [ ! -f $expect ]; then
    # Create the expect file if it doesn't yet exist.
     echo " CREATED"
     cp $actual $expect
    elif $CMP $expect $actual; then
     if $CMP $expect_err $actual_ext; then
      echo " PASSED"
    else
     echo "*FAILED*"
     echo "    Expected result (*.err) differs from actual result (*.oerr)"
     nerrors="`expr $nerrors + 1`"
     test yes = "$verbose" && $DIFF $expect_err $actual_ext |sed 's/^/    /'
    fi
    else
     echo "*FAILED*"
     echo "    Expected result (*.ddl) differs from actual result (*.out)"
     nerrors="`expr $nerrors + 1`"
     test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
    fi

    # Clean up output file
    if test -z "$HDF5_NOCLEANUP"; then
   rm -f $actual $actual_err $actual_sav $actual_err_sav
    fi

}

# Print a "SKIP" message
SKIP() {
   TESTING $DUMPER $@
    echo  " -SKIP-"
}
  
# Print a line-line message left justified in a field of 70 characters
#
PRINT_H5DIFF() {
 SPACES="                                                               "
 echo " Running h5diff $* $SPACES" | cut -c1-70 | tr -d '\012'
}


# Call the h5diff tool
#
DIFFTEST() 
{
    PRINT_H5DIFF  $@
    (
  cd $TESTDIR
  $RUNSERIAL $H5DIFF_BIN "$@" -q
    )
    RET=$?
    if [ $RET != 0 ] ; then
         echo "*FAILED*"
         nerrors="`expr $nerrors + 1`"
    else
         echo " PASSED"
    fi
        
}

# Print a line-line message left justified in a field of 70 characters
# beginning with the word "Verifying".
#
PRINT_H5IMPORT() {
 SPACES="                                                               "
 echo " Running h5import $* $SPACES" | cut -c1-70 | tr -d '\012'
}

# Call the h5import tool
#
IMPORTTEST() 
{
    # remove the output hdf5 file if it exists
    hdf5_file="$TESTDIR/$5"
    if [ -f $hdf5_file ]; then
     rm -f $hdf5_file
    fi

    PRINT_H5IMPORT  $@
    (
  cd $TESTDIR
  $RUNSERIAL $H5IMPORT_BIN "$@" 
    )
    RET=$?
    if [ $RET != 0 ] ; then
         echo "*FAILED*"
         nerrors="`expr $nerrors + 1`"
    else
         echo " PASSED"
    fi
        
}


##############################################################################
##############################################################################
###        T H E   T E S T S                                            ###
##############################################################################
##############################################################################
# prepare for test
COPY_TESTFILES_TO_TESTDIR

####### test for dataset packed bits ######

# test failure handling
# Missing file name
TOOLTEST tnofilename-with-packed-bits.ddl --enable-error-stack
# Limits:
# Maximum number of packed bits is 8 (for now).
# Maximum integer size is 64 (for now).
# Maximun Offset is 63 (Maximum size - 1).
# Maximum Offset+Length is 64 (Maximum size).
# Tests:
# Normal operation on both signed and unsigned int datasets.
# Sanity check
# Their rawdata output should be the same.
TOOLTEST tpbitsSignedWhole.ddl --enable-error-stack -d /DS08BITS -M 0,8 packedbits.h5
TOOLTEST tpbitsUnsignedWhole.ddl --enable-error-stack -d /DU08BITS -M 0,8 packedbits.h5
TOOLTEST tpbitsSignedIntWhole.ddl --enable-error-stack -d /DS16BITS -M 0,16 packedbits.h5
TOOLTEST tpbitsUnsignedIntWhole.ddl --enable-error-stack -d /DU16BITS -M 0,16 packedbits.h5
TOOLTEST tpbitsSignedLongWhole.ddl --enable-error-stack -d /DS32BITS -M 0,32 packedbits.h5
TOOLTEST tpbitsUnsignedLongWhole.ddl --enable-error-stack -d /DU32BITS -M 0,32 packedbits.h5
TOOLTEST tpbitsSignedLongLongWhole.ddl --enable-error-stack -d /DS64BITS -M 0,64 packedbits.h5
TOOLTEST tpbitsUnsignedLongLongWhole.ddl --enable-error-stack -d /DU64BITS -M 0,64 packedbits.h5
TOOLTEST tpbitsSignedLongLongWhole63.ddl --enable-error-stack -d /DS64BITS -M 0,63 packedbits.h5
TOOLTEST tpbitsUnsignedLongLongWhole63.ddl --enable-error-stack -d /DU64BITS -M 0,63 packedbits.h5
TOOLTEST tpbitsSignedLongLongWhole1.ddl --enable-error-stack -d /DS64BITS -M 1,63 packedbits.h5
TOOLTEST tpbitsUnsignedLongLongWhole1.ddl --enable-error-stack -d /DU64BITS -M 1,63 packedbits.h5
# Half sections
TOOLTEST tpbitsSigned4.ddl --enable-error-stack -d /DS08BITS -M 0,4,4,4 packedbits.h5
TOOLTEST tpbitsUnsigned4.ddl --enable-error-stack -d /DU08BITS -M 0,4,4,4 packedbits.h5
TOOLTEST tpbitsSignedInt8.ddl --enable-error-stack -d /DS16BITS -M 0,8,8,8 packedbits.h5
TOOLTEST tpbitsUnsignedInt8.ddl --enable-error-stack -d /DU16BITS -M 0,8,8,8 packedbits.h5
TOOLTEST tpbitsSignedLong16.ddl --enable-error-stack -d /DS32BITS -M 0,16,16,16 packedbits.h5
TOOLTEST tpbitsUnsignedLong16.ddl --enable-error-stack -d /DU32BITS -M 0,16,16,16 packedbits.h5
TOOLTEST tpbitsSignedLongLong32.ddl --enable-error-stack -d /DS64BITS -M 0,32,32,32 packedbits.h5
TOOLTEST tpbitsUnsignedLongLong32.ddl --enable-error-stack -d /DU64BITS -M 0,32,32,32 packedbits.h5
# Quarter sections
TOOLTEST tpbitsSigned2.ddl --enable-error-stack -d /DS08BITS -M 0,2,2,2,4,2,6,2 packedbits.h5
TOOLTEST tpbitsUnsigned2.ddl --enable-error-stack -d /DU08BITS -M 0,2,2,2,4,2,6,2 packedbits.h5
TOOLTEST tpbitsSignedInt4.ddl --enable-error-stack -d /DS16BITS -M 0,4,4,4,8,4,12,4 packedbits.h5
TOOLTEST tpbitsUnsignedInt4.ddl --enable-error-stack -d /DU16BITS -M 0,4,4,4,8,4,12,4 packedbits.h5
TOOLTEST tpbitsSignedLong8.ddl --enable-error-stack -d /DS32BITS -M 0,8,8,8,16,8,24,8 packedbits.h5
TOOLTEST tpbitsUnsignedLong8.ddl --enable-error-stack -d /DU32BITS -M 0,8,8,8,16,8,24,8 packedbits.h5
TOOLTEST tpbitsSignedLongLong16.ddl --enable-error-stack -d /DS64BITS -M 0,16,16,16,32,16,48,16 packedbits.h5
TOOLTEST tpbitsUnsignedLongLong16.ddl --enable-error-stack -d /DU64BITS -M 0,16,16,16,32,16,48,16 packedbits.h5
# Begin and End
TOOLTEST tpbitsSigned.ddl --enable-error-stack -d /DS08BITS -M 0,2,2,6 packedbits.h5
TOOLTEST tpbitsUnsigned.ddl --enable-error-stack -d /DU08BITS -M 0,2,2,6 packedbits.h5
TOOLTEST tpbitsSignedInt.ddl --enable-error-stack -d /DS16BITS -M 0,2,10,6 packedbits.h5
TOOLTEST tpbitsUnsignedInt.ddl --enable-error-stack -d /DU16BITS -M 0,2,10,6 packedbits.h5
TOOLTEST tpbitsSignedLong.ddl --enable-error-stack -d /DS32BITS -M 0,2,26,6 packedbits.h5
TOOLTEST tpbitsUnsignedLong.ddl --enable-error-stack -d /DU32BITS -M 0,2,26,6 packedbits.h5
TOOLTEST tpbitsSignedLongLong.ddl --enable-error-stack -d /DS64BITS -M 0,2,58,6 packedbits.h5
TOOLTEST tpbitsUnsignedLongLong.ddl --enable-error-stack -d /DU64BITS -M 0,2,58,6 packedbits.h5
# Overlapped packed bits.
TOOLTEST tpbitsOverlapped.ddl --enable-error-stack -d /DS08BITS -M 0,1,1,1,2,1,0,3 packedbits.h5
# Maximum number of packed bits.
TOOLTEST tpbitsMax.ddl --enable-error-stack -d /DS08BITS -M 0,1,1,1,2,1,3,1,4,1,5,1,6,1,7,1 packedbits.h5
# Compound type.
TOOLTEST tpbitsCompound.ddl --enable-error-stack -d /dset1 -M 0,1,1,1 tcompound.h5
# Array type.
TOOLTEST tpbitsArray.ddl --enable-error-stack -d /Dataset1 -M 0,1,1,1 tarray1.h5
# Test Error handling.
# Too many packed bits requested. Max is 8 for now.
TOOLTEST tpbitsMaxExceeded.ddl --enable-error-stack -d /DS08BITS -M 0,1,0,1,1,1,2,1,3,1,4,1,5,1,6,1,7,1 packedbits.h5
# Offset too large. Max is 7 (8-1) for now.
TOOLTEST tpbitsOffsetExceeded.ddl --enable-error-stack -d /DS08BITS -M 64,1 packedbits.h5
TOOLTEST tpbitsCharOffsetExceeded.ddl --enable-error-stack -d /DS08BITS -M 8,1 packedbits.h5
TOOLTEST tpbitsIntOffsetExceeded.ddl --enable-error-stack -d /DS16BITS -M 16,1 packedbits.h5
TOOLTEST tpbitsLongOffsetExceeded.ddl --enable-error-stack -d /DS32BITS -M 32,1 packedbits.h5
# Bad offset, must not be negative.
TOOLTEST tpbitsOffsetNegative.ddl --enable-error-stack -d /DS08BITS -M -1,1 packedbits.h5
# Bad length, must not be positive.
TOOLTEST tpbitsLengthPositive.ddl --enable-error-stack -d /DS08BITS -M 4,0 packedbits.h5
# Offset+Length is too large. Max is 8 for now.
TOOLTEST tpbitsLengthExceeded.ddl --enable-error-stack -d /DS08BITS -M 37,28 packedbits.h5
TOOLTEST tpbitsCharLengthExceeded.ddl --enable-error-stack -d /DS08BITS -M 2,7 packedbits.h5
TOOLTEST tpbitsIntLengthExceeded.ddl --enable-error-stack -d /DS16BITS -M 10,7 packedbits.h5
TOOLTEST tpbitsLongLengthExceeded.ddl --enable-error-stack -d /DS32BITS -M 26,7 packedbits.h5
# Incomplete pair of packed bits request.
TOOLTEST tpbitsIncomplete.ddl --enable-error-stack -d /DS08BITS -M 0,2,2,1,0,2,2, packedbits.h5


# Report test results and exit
if test $nerrors -eq 0 ; then
    echo "All $TESTNAME tests passed."
    exit $EXIT_SUCCESS
else
    echo "$TESTNAME tests failed with $nerrors errors."
    exit $EXIT_FAILURE
fi