/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 * Copyright by the Board of Trustees of the University of Illinois.         *
 * All rights reserved.                                                      *
 *                                                                           *
 * This file is part of HDF5.  The full HDF5 copyright notice, including     *
 * terms governing use, modification, and redistribution, is contained in    *
 * the files COPYING and Copyright.html.  COPYING can be found at the root   *
 * of the source code distribution tree; Copyright.html can be found at the  *
 * root level of an installed copy of the electronic HDF5 document set and   *
 * is linked from the top-level documents page.  It can also be found at     *
 * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have     *
 * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. *
 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

#include <stdio.h>
#include <fcntl.h>
#include <sys/stat.h>

#ifdef H5_HAVE_UNISTD_H
#include <unistd.h>
#endif

#include "hdf5.h"
#include "H5private.h"
#include "h5tools_utils.h"

#define TRUE 1
#define FALSE 0

hsize_t write_pad (int, hsize_t);
hsize_t compute_user_block_size (hsize_t);
hsize_t copy_some_to_file (int, int, hsize_t, hsize_t, ssize_t);
void parse_command_line (int, const char *[]);

const char *progname = "jam";
int d_status = EXIT_SUCCESS;
int do_clobber = FALSE;
char *output_file = NULL;
char *input_file = NULL;
char *ub_file = NULL;

/*
 * Command-line options: The user can specify short or long-named
 * parameters. The long-named ones can be partially spelled. When
 * adding more, make sure that they don't clash with each other.
 */
static const char *s_opts = "hi:u:o:c";	/* add more later ? */
static struct long_options l_opts[] = {
  {"help", no_arg, 'h'},
  {"hel", no_arg, 'h'},
  {"i", require_arg, 'i'},	/* input file */
  {"u", require_arg, 'u'},	/* user block file */
  {"o", require_arg, 'o'},	/* output file */
  {"clobber", no_arg, 'c'},	/* clobber existing UB */
  {"clobbe", no_arg, 'c'},
  {"clobb", no_arg, 'c'},
  {"clob", no_arg, 'c'},
  {"clo", no_arg, 'c'},
  {"cl", no_arg, 'c'},
  {NULL, 0, '\0'}
};

/*-------------------------------------------------------------------------
 * Function:    usage
 *
 * Purpose:     Print the usage message 
 *
 * Return:      void
 *
 * Programmer:  
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
static void
usage (const char *prog)
{
  fflush (stdout);
  fprintf (stdout,
	   "usage: %s -u user_block_file -i h5_file [-o ofile | --clobber] \n",
	   prog);
  fprintf (stdout, "           Add 'user_block_file' to front of \n");
  fprintf (stdout,
	   "           'h5_file', pad so 'h5_file' starts on proper\n");
  fprintf (stdout, "           byte.\n");
  fprintf (stdout, "\n");
  fprintf (stdout, "       %s -h \n", prog);
  fprintf (stdout, "           Print a usage message and exit\n");
}

/*-------------------------------------------------------------------------
 * Function:    parse_command_line
 *
 * Purpose:     Parse the command line for the h5dumper.
 *
 * Return:      Success:    
 *
 *              Failure:    Exits program with EXIT_FAILURE value.
 *
 * Programmer:  
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */

void
parse_command_line (int argc, const char *argv[])
{
  int opt = FALSE;

  /* parse command line options */
  while ((opt = get_option (argc, argv, s_opts, l_opts)) != EOF)
    {
      switch ((char) opt)
	{
	case 'o':
	  output_file = strdup (opt_arg);
	  break;
	case 'i':
	  input_file = strdup (opt_arg);
	  break;
	case 'u':
	  ub_file = strdup (opt_arg);
	  break;
	case 'c':
	  do_clobber = TRUE;
	  break;
	case 'h':
	  usage (progname);
	  exit (EXIT_SUCCESS);
	case '?':
	default:
	  usage (progname);
	  exit (EXIT_FAILURE);
	}
    }
}

/*-------------------------------------------------------------------------
 * Function:    main
 *
 * Purpose:     HDF5 user block jammer
 *
 * Return:      Success:    0
 *              Failure:    1
 *
 * Programmer:  
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
int
main (int argc, const char *argv[])
{
  int ufid;
  int h5fid;
  int ofid;
  void *edata;
  H5E_auto_stack_t func;
  hid_t ifile;
  hid_t plist;
  herr_t status;
  htri_t testval;
  hsize_t usize;
  hsize_t h5fsize;
  hsize_t startub;
  hsize_t where;
  hsize_t newubsize;
  off_t fsize;
  struct stat sbuf;
  struct stat sbuf2;
  int res;

  /* Disable error reporting */
  H5Eget_auto_stack (H5E_DEFAULT, &func, &edata);
  H5Eset_auto_stack (H5E_DEFAULT, NULL, NULL);

  parse_command_line (argc, argv);

  if (ub_file == NULL)
    {
      /* no user block */
      error_msg (progname, "no user block file name\n");
      usage (progname);
      exit (EXIT_FAILURE);
    }

  if (input_file == NULL)
    {
      /* no user block */
      error_msg (progname, "no HDF5 file\n");
      usage (progname);
      exit (EXIT_FAILURE);
    }

  testval = H5Fis_hdf5 (input_file);

  if (testval <= 0)
    {
      error_msg (progname, "Input HDF5 file is not HDF \"%s\"\n", input_file);
      exit (EXIT_FAILURE);
    }

  ifile = H5Fopen (input_file, H5F_ACC_RDONLY, H5P_DEFAULT);

  if (ifile < 0)
    {
      error_msg (progname, "Can't open input HDF5 file \"%s\"\n", input_file);
      exit (EXIT_FAILURE);
    }

  plist = H5Fget_create_plist (ifile);
  if (plist < 0)
    {
      error_msg (progname, "Can't get file creation plist for file \"%s\"\n",
		 input_file);
      exit (EXIT_FAILURE);
    }

  status = H5Pget_userblock (plist, &usize);
  if (status < 0)
    {
      error_msg (progname, "Can't get user block for file \"%s\"\n",
		 input_file);
      exit (EXIT_FAILURE);
    }

  H5Pclose (plist);
  H5Fclose (ifile);

  ufid = HDopen (ub_file, O_RDONLY, 0);

  if (ufid < 0)
    {
      error_msg (progname, "unable to open user block file \"%s\"\n",
		 ub_file);
      exit (EXIT_FAILURE);
    }

  res = stat (ub_file, &sbuf);

  if (res < 0)
    {
      error_msg (progname, "Can't stat file \"%s\"\n", ub_file);
      exit (EXIT_FAILURE);
    }

  fsize = sbuf.st_size;

  h5fid = HDopen (input_file, O_RDONLY, 0);

  if (h5fid < 0)
    {
      error_msg (progname, "unable to open HDF5 file for read \"%s\"\n",
		 input_file);
      exit (EXIT_FAILURE);
    }

  res = stat (input_file, &sbuf2);

  if (res < 0)
    {
      error_msg (progname, "Can't stat file \"%s\"\n", input_file);
      exit (EXIT_FAILURE);
    }

  h5fsize = sbuf2.st_size;

  if (output_file == NULL)
    {
      ofid = HDopen (input_file, O_WRONLY, 0);

      if (ofid < 0)
	{
	  error_msg (progname, "unable to open output file \"%s\"\n",
		     output_file);
	  exit (EXIT_FAILURE);
	}
    }
  else
    {
      ofid = HDopen (output_file, O_WRONLY | O_CREAT | O_TRUNC, 0644);

      if (ofid < 0)
	{
	  error_msg (progname, "unable to create output file \"%s\"\n",
		     output_file);
	  exit (EXIT_FAILURE);
	}
    }

  newubsize = compute_user_block_size ((hsize_t) fsize);

  startub = usize;

  if (usize > 0)
    {
      if (do_clobber == TRUE)
	{
	  /* where is max of the current size or the new UB */
	  if (usize > newubsize)
	    {
	      newubsize = usize;
	    }
	  startub = 0;		/*blast the old */
	}
      else
	{
	  /* add new ub to current ublock, pad to new offset */
	  newubsize += usize;
	  newubsize = compute_user_block_size ((hsize_t) newubsize);
	}
    }

  /* copy the HDF5 from starting at usize to starting at newubsize: 
   *  makes room at 'from' for new ub */
  /* if no current ub, usize is 0 */
  copy_some_to_file (h5fid, ofid, usize, newubsize,
		     (ssize_t) (h5fsize - usize));

  /* copy the old ub to the beginning of the new file */
  if (!do_clobber)
    {
      where =
	copy_some_to_file (h5fid, ofid, (hsize_t) 0, (hsize_t) 0,
			   (ssize_t) usize);
    }

  /* copy the new ub to the end of the ub */
  where = copy_some_to_file (ufid, ofid, (hsize_t) 0, startub, (ssize_t) - 1);

  /* pad the ub */
  where = write_pad (ofid, where);


  close (ufid);
  close (h5fid);
  close (ofid);

  return d_status;
}

/*-------------------------------------------------------------------------
 * Function:    copy_some_to_file
 *
 * Purpose:     Copy part of the input file to output.
 *		  infid: fd of file to read
 *		  outfid: fd of file to write
 *		  startin: offset of where to read from infid
 *		  startout: offset of where to write to outfid
 *		  limit: bytes to read/write
 *
 *		If limit is < 0, the entire input file is copied.
 *
 *		Note: this routine can be used to copy within
 *		the same file, i.e., infid and outfid can be the
 *		same file.
 *
 * Return:      Success:    last byte written in the output.
 *              Failure:    Exits program with EXIT_FAILURE value.
 *
 * Programmer:  
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
hsize_t
copy_some_to_file (int infid, int outfid, hsize_t startin, hsize_t startout,
		   ssize_t limit)
{
  char buf[1024];
  struct stat sbuf;
  int res;
  ssize_t tot = 0;
  ssize_t howmuch = 0;
  ssize_t nchars = -1;
/* used in assertion check
  ssize_t ncw = -1;
*/
  ssize_t to;
  ssize_t from;
  ssize_t toend;
  ssize_t fromend;

  if (startin > startout)
    {
      /* this case is prohibited */
      error_msg (progname, "copy_some_to_file: panic: startin > startout?\n");
      exit (EXIT_FAILURE);
    }

  if (limit < 0)
    {
      res = fstat (infid, &sbuf);

      if (res < 0)
	{
	  error_msg (progname, "Can't stat file \n");
	  exit (EXIT_FAILURE);
	}

      howmuch = sbuf.st_size;
    }
  else
    {
      howmuch = limit;
    }

  if (howmuch == 0)
    {
      return 0;
    }

  /* assert (howmuch > 0) */

  toend = (ssize_t) startout + howmuch;
  fromend = (ssize_t) startin + howmuch;

  if (howmuch > 512)
    {
      to = toend - 512;
      from = fromend - 512;
    }
  else
    {
      to = toend - howmuch;
      from = fromend - howmuch;
    }

  while (howmuch > 0)
    {
      HDlseek (outfid, (off_t) to, SEEK_SET);
      HDlseek (infid, (off_t) from, SEEK_SET);

      if (howmuch > 512)
	{
	  nchars = HDread (infid, buf, (unsigned) 512);
	}
      else
	{
	  nchars = HDread (infid, buf, (unsigned)howmuch);
	}

      if (nchars <= 0)
	{
	  printf ("huh? \n");
	  exit (1);
	}
      /*ncw = */ HDwrite (outfid, buf, (unsigned) nchars);

      /* assert (ncw == nchars) */

      tot += nchars;
      howmuch -= nchars;
      if (howmuch > 512)
	{
	  to -= nchars;
	  from -= nchars;
	}
      else
	{
	  to -= howmuch;
	  from -= howmuch;
	}
    }

  /* assert howmuch == 0 */
  /* assert tot == limit */

  return ((hsize_t) tot + (hsize_t) startout);
}


/*-------------------------------------------------------------------------
 * Function:    compute_user_block_size
 *
 * Purpose:     Find the offset of the HDF5 header after the user block: 
 *                 align at 0, 512, 1024, etc.
 *			ublock_size: the size of the user block (bytes).
 *		
 * Return:      Success:    the location of the header == the size of the
 *				padded user block.
 *              Failure:    none
 *
 * Return:      Success:    last byte written in the output.
 *              Failure:    Exits program with EXIT_FAILURE value.
 *
 * Programmer:  
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */
hsize_t
compute_user_block_size (hsize_t ublock_size)
{
  hsize_t where = 512;

  if (ublock_size == 0)
    return 0;

  while (where < ublock_size)
    {
      where *= 2;
    }

  return (where);
}

/*
 *  Write zeroes to fill the file from 'where' to 512, 1024, etc. bytes.
 *
 *  Returns the size of the padded file.
 */
hsize_t
write_pad (int ofile, hsize_t where)
{
  unsigned int i;
  char buf[1];
  hsize_t psize;

  buf[0] = '\0';

  HDlseek (ofile, (off_t) where, SEEK_SET);

  psize = compute_user_block_size (where);
  psize -= where;

  for (i = 0; i < psize; i++)
    {
      HDwrite (ofile, buf, 1);
    }
  return (where + psize);	/* the new size of the file. */
}