/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 * Copyright by the Board of Trustees of the University of Illinois.         *
 * All rights reserved.                                                      *
 *                                                                           *
 * This file is part of HDF5.  The full HDF5 copyright notice, including     *
 * terms governing use, modification, and redistribution, is contained in    *
 * the files COPYING and Copyright.html.  COPYING can be found at the root   *
 * of the source code distribution tree; Copyright.html can be found at the  *
 * root level of an installed copy of the electronic HDF5 document set and   *
 * is linked from the top-level documents page.  It can also be found at     *
 * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have     *
 * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. *
 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <ctype.h>
#include "h5repack.h"


/*-------------------------------------------------------------------------
 * Function: parse_filter
 *
 * Purpose: read filter information
 *
 * Return: a list of names, the number of names and its compression type
 *
 * <name of filter> can be:
 *  GZIP, to apply the HDF5 GZIP filter (GZIP compression)
 *  SZIP, to apply the HDF5 SZIP filter (SZIP compression)
 *  SHUF, to apply the HDF5 shuffle filter
 *  FLET, to apply the HDF5 checksum filter
 *  NONE, to remove the filter 
 *
 * Examples: 
 * "GZIP 6"
 * "A,B:NONE"
 *
 * Programmer: Pedro Vicente, pvn@ncsa.uiuc.edu
 *
 * Date: September, 23, 2003
 *
 *-------------------------------------------------------------------------
 */


obj_list_t* parse_filter(const char *str, 
                         int *n_objs, 
                         filter_info_t *filt,
                         pack_opt_t *options)
{
 unsigned    i, u;
 char        c;
 size_t      len=strlen(str);
 int         j, m, n, k, end_obj=-1, no_param=0;
 char        sobj[MAX_NC_NAME]; 
 char        scomp[10];
 char        stype[5];
 obj_list_t* obj_list=NULL;
 unsigned    pixels_per_block;

 /* initialize compression  info */
 memset(filt,0,sizeof(filter_info_t));

 /* check for the end of object list and number of objects */
 for ( i=0, n=0; i<len; i++)
 {
  c = str[i];
  if ( c==':' )
  {
   end_obj=i;
  }
  if ( c==',' )
  {
   n++;
  }
 }

 if (end_obj==-1) { /* missing : */
  /* apply to all objects */
  options->all_filter=1;
 }
  
 n++;
 obj_list=malloc(n*sizeof(obj_list_t));
 if (obj_list==NULL)
 {
  printf("Could not alloc object list\n");
  return NULL;
 }
 *n_objs=n;

 /* get object list */
 for ( j=0, k=0, n=0; j<end_obj; j++,k++)
 {
  c = str[j];
  sobj[k]=c;
  if ( c==',' || j==end_obj-1) 
  {
   if ( c==',') sobj[k]='\0'; else sobj[k+1]='\0';
   strcpy(obj_list[n].obj,sobj);
   memset(sobj,0,sizeof(sobj));
   n++;
   k=-1;
  }
 }
 /* nothing after : */
 if (end_obj+1==(int)len)
 {
  if (obj_list) free(obj_list);
  printf("Input Error: Invalid compression type in <%s>\n",str);
  exit(1);
 }


 /* get filter additional parameters */
 m=0;
 for ( i=end_obj+1, k=0, j=0; i<len; i++,k++)
 {
  c = str[i];
  scomp[k]=c;
  if ( c==' ' || i==len-1) 
  {
   if ( c==' ') {      /*one more parameter */
    scomp[k]='\0';     /*cut space */

    /* here we could have 1, 2 or 3 digits  */
    for ( m=0,u=i+1; u<len; u++,m++) {
     c = str[u];
     if (!isdigit(c)){
      if (obj_list) free(obj_list);
      printf("Input Error: Compression parameter not digit in <%s>\n",str);
      exit(1);
     }
     stype[m]=c;
    }
    stype[m]='\0';
    filt->cd_values[j++]=atoi(stype);
    i+=m; /* jump */
   }
   else if (i==len-1) { /*no more parameters */
    scomp[k+1]='\0';
    no_param=1;
   }

/*-------------------------------------------------------------------------
 * H5Z_FILTER_NONE
 *-------------------------------------------------------------------------
 */
   if (strcmp(scomp,"NONE")==0)
    filt->filtn=H5Z_FILTER_NONE;

/*-------------------------------------------------------------------------
 * H5Z_FILTER_DEFLATE
 *-------------------------------------------------------------------------
 */
   else if (strcmp(scomp,"GZIP")==0)
   {
    filt->filtn=H5Z_FILTER_DEFLATE;
    if (no_param) { /*no more parameters, GZIP must have parameter */
     if (obj_list) free(obj_list);
     printf("Input Error: Missing compression parameter in <%s>\n",str);
     exit(1);
    }
   }

/*-------------------------------------------------------------------------
 * H5Z_FILTER_SZIP
 *-------------------------------------------------------------------------
 */
   else if (strcmp(scomp,"SZIP")==0)
   {
    filt->filtn=H5Z_FILTER_SZIP;
    if (no_param) { /*no more parameters, SZIP must have parameter */
     if (obj_list) free(obj_list);
     printf("Input Error: Missing compression parameter in <%s>\n",str);
     exit(1);
    }
   }

/*-------------------------------------------------------------------------
 * H5Z_FILTER_SHUFFLE
 *-------------------------------------------------------------------------
 */
   else if (strcmp(scomp,"SHUF")==0)
   {
    filt->filtn=H5Z_FILTER_SHUFFLE;
    if (m>0){ /*shuffle does not have parameter */
     if (obj_list) free(obj_list);
     printf("Input Error: Extra parameter in SHUF <%s>\n",str);
     exit(1);
    }
   }
/*-------------------------------------------------------------------------
 * H5Z_FILTER_FLETCHER32
 *-------------------------------------------------------------------------
 */
   else if (strcmp(scomp,"FLET")==0)
   {
    filt->filtn=H5Z_FILTER_FLETCHER32;
    if (m>0){ /*shuffle does not have parameter */
     if (obj_list) free(obj_list);
     printf("Input Error: Extra parameter in FLET <%s>\n",str);
     exit(1);
    }
   }
   else {
    if (obj_list) free(obj_list);
    printf("Input Error: Invalid filter type in <%s>\n",str);
    exit(1);
   }
  }
 } /*i*/

/*-------------------------------------------------------------------------
 * check valid parameters
 *-------------------------------------------------------------------------
 */

 switch (filt->filtn)
 {
  
 case H5Z_FILTER_DEFLATE:
  if (filt->cd_values[0]<0 || filt->cd_values[0]>9 ){
   if (obj_list) free(obj_list);
   printf("Input Error: Invalid compression parameter in <%s>\n",str);
   exit(1);
  }
  break;
  
  
 case H5Z_FILTER_SZIP:
  pixels_per_block=filt->cd_values[0];
  if ((pixels_per_block%2)==1) {
   if (obj_list) free(obj_list);
   printf("Input Error: pixels_per_block is not even in <%s>\n",str);
   exit(1);
  }
  if (pixels_per_block>H5_SZIP_MAX_PIXELS_PER_BLOCK) {
   if (obj_list) free(obj_list);
   printf("Input Error: pixels_per_block is too large in <%s>\n",str);
   exit(1);
  }
  break;
 };

 return obj_list;
}


/*-------------------------------------------------------------------------
 * Function: get_sfilter
 *
 * Purpose: return the filter as a string name
 *
 * Return: name of filter, exit on error
 *
 *-------------------------------------------------------------------------
 */

const char* get_sfilter(H5Z_filter_t filtn)
{
 if (filtn==H5Z_FILTER_NONE)
  return "NONE";
 else if (filtn==H5Z_FILTER_DEFLATE)
  return "GZIP";
 else if (filtn==H5Z_FILTER_SZIP)
  return "SZIP";
 else if (filtn==H5Z_FILTER_SHUFFLE)
  return "SHUFFLE";
 else if (filtn==H5Z_FILTER_FLETCHER32)
  return "FLETCHERP";
 else {
  printf("Input error in filter type\n");
  exit(1);
 }
 return NULL;
} 


/*-------------------------------------------------------------------------
 * Function: parse_layout
 *
 * Purpose: read layout info
 *
 * Return: a list of names, the number of names and its chunking info for 
 *  chunked. NULL, on error
 * the layout type can be:
 *  CHUNK, to apply chunking layout
 *  CONTI, to apply continuous layout
 *  COMPA, to apply compact layout
 *
 * Example: 
 * "AA,B,CDE:CHUNK 10X10"
 *
 * Programmer: Pedro Vicente, pvn@ncsa.uiuc.edu
 *
 * Date: December 30, 2003
 *
 *-------------------------------------------------------------------------
 */



obj_list_t* parse_layout(const char *str, 
                         int *n_objs, 
                         pack_info_t *pack,    /* info about layout needed */
                         pack_opt_t *options)
{
 obj_list_t* obj_list=NULL;
 unsigned    i;
 char        c;
 size_t      len=strlen(str);
 int         j, n, k, end_obj=-1, c_index;
 char        sobj[MAX_NC_NAME]; 
 char        sdim[10];
 char        slayout[10];
 
 /* check for the end of object list and number of objects */
 for ( i=0, n=0; i<len; i++)
 {
  c = str[i];
  if ( c==':' )
  {
   end_obj=i;
  }
  if ( c==',' )
  {
   n++;
  }
 }

 if (end_obj==-1) { /* missing : chunk all */
  options->all_layout=1;
 }
  
 n++;
 obj_list=malloc(n*sizeof(obj_list_t));
 if (obj_list==NULL)
 {
  printf("Could not alloc object list\n");
  return NULL;
 }
 *n_objs=n;

 /* get object list */
 for ( j=0, k=0, n=0; j<end_obj; j++,k++)
 {
  c = str[j];
  sobj[k]=c;
  if ( c==',' || j==end_obj-1) 
  {
   if ( c==',') sobj[k]='\0'; else sobj[k+1]='\0';
   strcpy(obj_list[n].obj,sobj);
   memset(sobj,0,sizeof(sobj));
   n++;
   k=-1;
  }
 }

 /* nothing after : */
 if (end_obj+1==(int)len)
 {
  if (obj_list) free(obj_list);
  printf("Parse layout error: No characters after : in <%s>\n",str);
  exit(1);
 }

 /* get layout info */
 for ( j=end_obj+1, n=0; n<=5; j++,n++)
 {
  if (n==5) 
  {
   slayout[n]='\0';  /*cut string */
   if (strcmp(slayout,"COMPA")==0)
    pack->layout=H5D_COMPACT;  
   else if (strcmp(slayout,"CONTI")==0)
    pack->layout=H5D_CONTIGUOUS;
   else if (strcmp(slayout,"CHUNK")==0)
    pack->layout=H5D_CHUNKED;
   else {
    printf("Parse layout error: Not a valid layout in <%s>\n",str);
   }
  }
  else
  {
   c = str[j];
   slayout[n]=c;
  }
 } /* j */
 

 if ( pack->layout=H5D_CHUNKED )
 {

/*-------------------------------------------------------------------------
 * get chunk info
 *-------------------------------------------------------------------------
 */
   k=0; 
   for ( i=j, c_index=0; i<len; i++)
   {
    c = str[i];
    sdim[k]=c;
    k++; /*increment sdim index */

#if defined PARSE_DEBUG
    printf (" i=%d c=%c ",i, c);
#endif
    
    if (!isdigit(c) && c!='x' && c!='N' && c!='O' && c!='N' && c!='E'){
     if (obj_list) free(obj_list);
     printf("Parse layout error: <%s> Not a valid character in <%s>\n",
      sdim,str);
     exit(1);
    }
    
    if ( c=='x' || i==len-1) 
    {
     if ( c=='x') {  
      sdim[k-1]='\0';  
      k=0;
      pack->chunk.chunk_lengths[c_index]=atoi(sdim);
      if (pack->chunk.chunk_lengths[c_index]==0) {
       if (obj_list) free(obj_list);
       printf("Parse layout error: <%s> Conversion to number in <%s>\n",
        sdim,str);
       exit(1);
      }
      c_index++;
     }
     else if (i==len-1) { /*no more parameters */
      sdim[k]='\0';  
      k=0;
      if (strcmp(sdim,"NONE")==0)
      {
       pack->chunk.rank=-2;
      }
      else
      {
       pack->chunk.chunk_lengths[c_index]=atoi(sdim);
       if (pack->chunk.chunk_lengths[c_index]==0){
        if (obj_list) free(obj_list);
        printf("Parse layout error: <%s> Conversion to number in <%s>\n",
         sdim,str);
        exit(1);
       }
       pack->chunk.rank=c_index+1;
      }
     } /*if */
    } /*if c=='x' || i==len-1 */
   } /*i*/

  
 } /*H5D_CHUNKED*/

 
 return obj_list;
}



/*-------------------------------------------------------------------------
 * Function: parse_number
 *
 * Purpose: read a number from command line argument
 *
 * Return: number, -1 for FAIL
 *
 * Programmer: Pedro Vicente, pvn@ncsa.uiuc.edu
 *
 * Date: September, 23, 2003
 *
 *-------------------------------------------------------------------------
 */


int parse_number(char *str)
{
 unsigned    i;
 int         n;
 char        c;
 size_t      len=strlen(str);
  
 for ( i=0; i<len; i++)
 {
  c = str[i];
  if (!isdigit(c)){
   return -1;
  }
 }
 str[i]='\0';     
 n=atoi(str);
 return n;
}