/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ #include "hdf5.h" #include "h5test.h" #include "h5repack.h" #include "h5diff.h" /*------------------------------------------------------------------------- * Function: test_copy * * Purpose: * * 1) make a copy with no filters * 2) use the h5diff utility to compare the input and output file; * it returns RET==0 if the objects have the same data * * Return: Success: zero * Failure: 1 * * Programmer: Pedro Vicente * September, 19, 2003 * *------------------------------------------------------------------------- */ static int test_copy(void) { pack_opt_t pack_options; diff_opt_t diff_options; memset(&diff_options, 0, sizeof (diff_opt_t)); TESTING(" copy with no filters"); if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack(FNAME1,FNAME1OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME1,FNAME1OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME1OUT,&pack_options)<=0) TEST_ERROR; #if 0 if (h5repack_cmpdcpl(FNAME1,FNAME1OUT)<=0) TEST_ERROR; #endif if (h5repack_end (&pack_options)<0) TEST_ERROR; PASSED(); TESTING(" copy of attributes"); if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack(FNAME2,FNAME2OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME2,FNAME2OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME2OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; PASSED(); TESTING(" copy of hardlinks"); if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack(FNAME3,FNAME3OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME3,FNAME3OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME3OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; PASSED(); return 0; error: return 1; } /*------------------------------------------------------------------------- * Function: test_filter_deflate * * Purpose: * * 1) compress/chunk FILENAME with the DEFLATE filter * 2) use the h5diff utility to compare the input and output file; * it returns RET==0 if the objects have the same data * 3) use API functions to verify the compression/chunking input on the output file * * Return: Success: zero * Failure: 1 * * Programmer: Pedro Vicente * September, 19, 2003 * * *------------------------------------------------------------------------- */ static int test_filter_deflate(void) { pack_opt_t pack_options; diff_opt_t diff_options; memset(&diff_options, 0, sizeof (diff_opt_t)); memset(&pack_options, 0, sizeof (pack_opt_t)); TESTING(" deflate filter"); #ifdef H5_HAVE_FILTER_DEFLATE /*------------------------------------------------------------------------- * test no object option (preserve old filters) *------------------------------------------------------------------------- */ if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; /*------------------------------------------------------------------------- * test an individual object option *------------------------------------------------------------------------- */ if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack_addfilter("dset1:GZIP 9",&pack_options)<0) TEST_ERROR; if (h5repack_addlayout("dset1:CHUNK 20x10",&pack_options)<0) TEST_ERROR; if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; /*------------------------------------------------------------------------- * test all objects option *------------------------------------------------------------------------- */ if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack_addfilter("GZIP 9",&pack_options)<0) TEST_ERROR; if (h5repack_addlayout("CHUNK 20x10",&pack_options)<0) TEST_ERROR; if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; PASSED(); #else SKIPPED(); #endif return 0; #ifdef H5_HAVE_FILTER_DEFLATE error: return 1; #endif } /*------------------------------------------------------------------------- * Function: test_filter_szip * * Purpose: * * 1) compress/chunk FILENAME with the SZIP filter * 2) use the h5diff utility to compare the input and output file; * it returns RET==0 if the objects have the same data * 3) use API functions to verify the compression/chunking input on the output file * * Return: Success: zero * Failure: 1 * * Programmer: Pedro Vicente * December, 19, 2003 * * *------------------------------------------------------------------------- */ static int test_filter_szip(void) { pack_opt_t pack_options; diff_opt_t diff_options; memset(&diff_options, 0, sizeof (diff_opt_t)); memset(&pack_options, 0, sizeof (pack_opt_t)); TESTING(" szip filter"); #ifdef H5_HAVE_FILTER_SZIP /*------------------------------------------------------------------------- * test an individual object option *------------------------------------------------------------------------- */ if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack_addfilter("dset2:SZIP 8",&pack_options)<0) TEST_ERROR; if (h5repack_addlayout("dset2:CHUNK 20x10",&pack_options)<0) TEST_ERROR; if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; /*------------------------------------------------------------------------- * test all objects option *------------------------------------------------------------------------- */ #if 0 if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack_addfilter("SZIP 8",&pack_options)<0) TEST_ERROR; if (h5repack_addlayout("CHUNK 20x10",&pack_options)<0) TEST_ERROR; if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; #endif PASSED(); #else SKIPPED(); #endif return 0; #ifdef H5_HAVE_FILTER_SZIP error: return 1; #endif } /*------------------------------------------------------------------------- * Function: test_filter_shuffle * * Purpose: * * 1) compress/chunk FILENAME with the shuffle filter * 2) use the h5diff utility to compare the input and output file; * it returns RET==0 if the objects have the same data * 3) use API functions to verify the compression/chunking input on the output file * * Return: Success: zero * Failure: 1 * * Programmer: Pedro Vicente * September, 19, 2003 * * Modifications: * *------------------------------------------------------------------------- */ static int test_filter_shuffle(void) { pack_opt_t pack_options; diff_opt_t diff_options; memset(&diff_options, 0, sizeof (diff_opt_t)); memset(&pack_options, 0, sizeof (pack_opt_t)); TESTING(" shuffle filter"); #ifdef H5_HAVE_FILTER_SHUFFLE /*------------------------------------------------------------------------- * test an individual object option *------------------------------------------------------------------------- */ if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack_addfilter("dset1:SHUF",&pack_options)<0) TEST_ERROR; if (h5repack_addlayout("dset1:CHUNK 20x10",&pack_options)<0) TEST_ERROR; if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; /*------------------------------------------------------------------------- * test all objects option *------------------------------------------------------------------------- */ if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack_addfilter("SHUF",&pack_options)<0) TEST_ERROR; if (h5repack_addlayout("CHUNK 20x10",&pack_options)<0) TEST_ERROR; if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; PASSED(); #else SKIPPED(); #endif return 0; #ifdef H5_HAVE_FILTER_SHUFFLE error: return 1; #endif } /*------------------------------------------------------------------------- * Function: test_filter_checksum * * Purpose: * * 1) compress/chunk FILENAME with the checksum filter * 2) use the h5diff utility to compare the input and output file; * it returns RET==0 if the objects have the same data * 3) use API functions to verify the compression/chunking input on the output file * * Return: Success: zero * Failure: 1 * * Programmer: Pedro Vicente * September, 19, 2003 * *------------------------------------------------------------------------- */ static int test_filter_checksum(void) { pack_opt_t pack_options; diff_opt_t diff_options; memset(&diff_options, 0, sizeof (diff_opt_t)); memset(&pack_options, 0, sizeof (pack_opt_t)); TESTING(" checksum filter"); #ifdef H5_HAVE_FILTER_FLETCHER32 /*------------------------------------------------------------------------- * test an individual object option *------------------------------------------------------------------------- */ if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack_addfilter("dset1:FLET",&pack_options)<0) TEST_ERROR; if (h5repack_addlayout("dset1:CHUNK 20x10",&pack_options)<0) TEST_ERROR; if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; /*------------------------------------------------------------------------- * test all objects option *------------------------------------------------------------------------- */ if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack_addfilter("FLET",&pack_options)<0) TEST_ERROR; if (h5repack_addlayout("CHUNK 20x10",&pack_options)<0) TEST_ERROR; if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; PASSED(); #else SKIPPED(); #endif return 0; #ifdef H5_HAVE_FILTER_FLETCHER32 error: return 1; #endif } /*------------------------------------------------------------------------- * Function: test_layout_chunked * * Purpose: * * 1) test the CHUNK layout options * 2) use the h5diff utility to compare the input and output file; * it returns RET==0 if the objects have the same data * 3) use API functions to verify the layout input on the output file * * Return: Success: zero * Failure: 1 * * Programmer: Pedro Vicente * December 30, 2003 * *------------------------------------------------------------------------- */ static int test_layout_chunked(void) { pack_opt_t pack_options; diff_opt_t diff_options; memset(&diff_options, 0, sizeof (diff_opt_t)); memset(&pack_options, 0, sizeof (pack_opt_t)); TESTING(" layout chunked"); /*------------------------------------------------------------------------- * test an individual object option *------------------------------------------------------------------------- */ if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack_addlayout("dset1:CHUNK 20x10",&pack_options)<0) TEST_ERROR; if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; /*------------------------------------------------------------------------- * test all objects option *------------------------------------------------------------------------- */ if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack_addlayout("CHUNK 20x10",&pack_options)<0) TEST_ERROR; if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; PASSED(); return 0; error: return 1; } /*------------------------------------------------------------------------- * Function: test_layout_contiguous * * Purpose: * * 1) test the CONTI layout options * 2) use the h5diff utility to compare the input and output file; * it returns RET==0 if the objects have the same data * 3) use API functions to verify the layout input on the output file * * Return: Success: zero * Failure: 1 * * Programmer: Pedro Vicente * December 30, 2003 * *------------------------------------------------------------------------- */ static int test_layout_contiguous(void) { pack_opt_t pack_options; diff_opt_t diff_options; memset(&diff_options, 0, sizeof (diff_opt_t)); memset(&pack_options, 0, sizeof (pack_opt_t)); TESTING(" layout contiguous"); /*------------------------------------------------------------------------- * test an individual object option *------------------------------------------------------------------------- */ if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack_addlayout("dset1:CONTI",&pack_options)<0) TEST_ERROR; if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; /*------------------------------------------------------------------------- * test all objects option *------------------------------------------------------------------------- */ if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack_addlayout("CONTI",&pack_options)<0) TEST_ERROR; if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; PASSED(); return 0; error: return 1; } /*------------------------------------------------------------------------- * Function: test_layout_compact * * Purpose: * * 1) test the COMPA layout options * 2) use the h5diff utility to compare the input and output file; * it returns RET==0 if the objects have the same data * 3) use API functions to verify the layout input on the output file * * Return: Success: zero * Failure: 1 * * Programmer: Pedro Vicente * December 30, 2003 * *------------------------------------------------------------------------- */ static int test_layout_compact(void) { pack_opt_t pack_options; diff_opt_t diff_options; memset(&diff_options, 0, sizeof (diff_opt_t)); memset(&pack_options, 0, sizeof (pack_opt_t)); TESTING(" layout compact"); /*------------------------------------------------------------------------- * test an individual object option *------------------------------------------------------------------------- */ if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack_addlayout("dset1:COMPA",&pack_options)<0) TEST_ERROR; if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; /*------------------------------------------------------------------------- * test all objects option *------------------------------------------------------------------------- */ if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack_addlayout("COMPA",&pack_options)<0) TEST_ERROR; if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; PASSED(); return 0; error: return 1; } /*------------------------------------------------------------------------- * Function: test_filterqueue * * Purpose: * * 1) test several filters * 2) use the h5diff utility to compare the input and output file; * it returns RET==0 if the objects have the same data * 3) use API functions to verify the input on the output file * * Return: Success: zero * Failure: 1 * * Programmer: Pedro Vicente * January 5, 2004 * *------------------------------------------------------------------------- */ static int test_filterqueue(void) { pack_opt_t pack_options; diff_opt_t diff_options; memset(&diff_options, 0, sizeof (diff_opt_t)); memset(&pack_options, 0, sizeof (pack_opt_t)); TESTING(" filter queue"); /*------------------------------------------------------------------------- * add some filters *------------------------------------------------------------------------- */ if (h5repack_init (&pack_options, 0)<0) TEST_ERROR; if (h5repack_addlayout("dset1:CHUNK 20x10",&pack_options)<0) TEST_ERROR; if (h5repack_addfilter("dset1:FLET",&pack_options)<0) TEST_ERROR; if (h5repack_addfilter("dset1:SHUF",&pack_options)<0) TEST_ERROR; if (h5repack_addfilter("dset1:GZIP 1",&pack_options)<0) TEST_ERROR; #if 0 if (h5repack_addfilter("dset1:SZIP 8",&pack_options)<0) TEST_ERROR; #endif if (h5repack(FNAME4,FNAME4OUT,&pack_options)<0) TEST_ERROR; if (h5diff(FNAME4,FNAME4OUT,NULL,NULL,&diff_options) == 1) TEST_ERROR; if (h5repack_verify(FNAME4OUT,&pack_options)<=0) TEST_ERROR; if (h5repack_end (&pack_options)<0) TEST_ERROR; PASSED(); return 0; error: return 1; } /*------------------------------------------------------------------------- * Function: main * * Purpose: Executes h5repack tests * * Return: Success: zero * Failure: non-zero * * Programmer: Pedro Vicente * January, 5, 2004 * *------------------------------------------------------------------------- */ int main (void) { int nerrors=0; /* run tests */ puts("Testing h5repack:"); /* make the test files */ if (make_testfiles()<0) goto error; /* test a copy with no filters */ nerrors += test_copy(); /* test a copy with the deflate filter */ nerrors += test_filter_deflate(); /* test a copy with the szip filter */ nerrors += test_filter_szip(); /* test a copy with the shuffle filter */ nerrors += test_filter_shuffle(); /* test a copy with the checksum filter */ nerrors += test_filter_checksum(); /* test a copy with layout CHUNK options */ nerrors += test_layout_chunked(); /* test a copy with layout CONTI options */ nerrors += test_layout_contiguous(); /* test a copy with layout COMPA options */ nerrors += test_layout_compact(); /* test a copy with the shuffle filter */ nerrors += test_filter_shuffle(); /* test a copy with the checksum filter */ nerrors += test_filter_checksum(); /* test a copy with layout CHUNK options */ nerrors += test_layout_chunked(); /* test a copy with layout CONTI options */ nerrors += test_layout_contiguous(); /* test a copy with layout COMPA options */ nerrors += test_layout_compact(); /* test a copy with all available filters */ nerrors += test_filterqueue(); /* check for errors */ if (nerrors) goto error; puts("All h5repack tests passed."); return 0; error: puts("***** H5REPACK TESTS FAILED *****"); return 1; return 0; }