/* * Copyright © 1998 NCSA * All rights reserved. * * Programmer: Robb Matzke * Thursday, July 23, 1998 * * Purpose: Support functions for the various tools. */ #ifndef _H5TOOLS_H #define _H5TOOLS_H #include #include #if H5_VERS_MAJOR == 1 #if H5_VERS_MINOR == 2 #define VERSION12 #elif H5_VERS_MINOR == 3 #define VERSION13 #endif #endif #define ESCAPE_HTML 1 /* * Information about how to format output. */ typedef struct h5dump_t { /* * Fields associated with formatting numeric data. If a datatype matches * multiple formats based on its size, then the first applicable format * from this list is used. However, if `raw' is non-zero then dump all * data in hexadecimal format without translating from what appears on * disk. * * raw: If set then print all data as hexadecimal without * performing any conversion from disk. * * fmt_raw: The printf() format for each byte of raw data. The * default is `%02x'. * * fmt_int: The printf() format to use when rendering data which is * typed `int'. The default is `%d'. * * fmt_uint: The printf() format to use when rendering data which is * typed `unsigned'. The default is `%u'. * * fmt_schar: The printf() format to use when rendering data which is * typed `signed char'. The default is `%d'. This format is * used ony if the `ascii' field is zero. * * fmt_uchar: The printf() format to use when rendering data which is * typed `unsigned char'. The default is `%u'. This format * is used only if the `ascii' field is zero. * * fmt_short: The printf() format to use when rendering data which is * typed `short'. The default is `%d'. * * fmt_ushort: The printf() format to use when rendering data which is * typed `unsigned short'. The default is `%u'. * * fmt_long: The printf() format to use when rendering data which is * typed `long'. The default is `%ld'. * * fmt_ulong: The printf() format to use when rendering data which is * typed `unsigned long'. The default is `%lu'. * * fmt_llong: The printf() format to use when rendering data which is * typed `long long'. The default depends on what printf() * format is available to print this datatype. * * fmt_ullong: The printf() format to use when rendering data which is * typed `unsigned long long'. The default depends on what * printf() format is available to print this datatype. * * fmt_double: The printf() format to use when rendering data which is * typed `double'. The default is `%g'. * * fmt_float: The printf() format to use when rendering data which is * typed `float'. The default is `%g'. * * ascii: If set then print 1-byte integer values as an ASCII * character (no quotes). If the character is one of the * standard C escapes then print the escaped version. If * the character is unprintable then print a 3-digit octal * escape. If `ascii' is zero then then 1-byte integers are * printed as numeric values. The default is zero. * * str_locale: Determines how strings are printed. If zero then strings * are printed like in C except. If set to ESCAPE_HTML then * strings are printed using HTML encoding where each * character not in the class [a-zA-Z0-9] is substituted * with `%XX' where `X' is a hexadecimal digit. * * str_repeat: If set to non-zero then any character value repeated N * or more times is printed as 'C'*N * * Numeric data is also subject to the formats for individual elements. */ hbool_t raw; const char *fmt_raw; const char *fmt_int; const char *fmt_uint; const char *fmt_schar; const char *fmt_uchar; const char *fmt_short; const char *fmt_ushort; const char *fmt_long; const char *fmt_ulong; const char *fmt_llong; const char *fmt_ullong; const char *fmt_double; const char *fmt_float; int ascii; int str_locale; int str_repeat; /* * Fields associated with compound array members. * * pre: A string to print at the beginning of each array. The * default value is the left square bracket `['. * * sep: A string to print between array values. The default * value is a ",\001" ("\001" indicates an optional line * break). * * suf: A string to print at the end of each array. The default * value is a right square bracket `]'. * * linebreaks: a boolean value to determine if we want to break the line * after each row of an array. */ const char *arr_pre; const char *arr_sep; const char *arr_suf; int arr_linebreak; /* * Fields associated with compound data types. * * name: How the name of the struct member is printed in the * values. By default the name is not printed, but a * reasonable setting might be "%s=" which prints the name * followed by an equal sign and then the value. * * sep: A string that separates one member from another. The * default is ", \001" (the \001 indicates an optional * line break to allow structs to span multiple lines of * output). * * pre: A string to print at the beginning of a compound type. * The default is a left curly brace. * * suf: A string to print at the end of each compound type. The * default is right curly brace. * * end: a string to print after we reach the last element of * each compound type. prints out before the suf. */ const char *cmpd_name; const char *cmpd_sep; const char *cmpd_pre; const char *cmpd_suf; const char *cmpd_end; /* * Fields associated with the individual elements. * * fmt: A printf(3c) format to use to print the value string * after it has been rendered. The default is "%s". * * suf1: This string is appended to elements which are followed by * another element whether the following element is on the * same line or the next line. The default is a comma. * * suf2: This string is appended (after `suf1') to elements which * are followed on the same line by another element. The * default is a single space. */ const char *elmt_fmt; const char *elmt_suf1; const char *elmt_suf2; /* * Fields associated with the index values printed at the left edge of * each line of output. * * n_fmt: Each index value is printed according to this printf(3c) * format string which should include a format for a long * integer. The default is "%lu". * * sep: Each integer in the index list will be separated from the * others by this string, which defaults to a comma. * * fmt: After the index values are formated individually and * separated from one another by some string, the entire * resulting string will be formated according to this * printf(3c) format which should include a format for a * character string. The default is "%s". */ const char *idx_n_fmt; /*index number format */ const char *idx_sep; /*separator between numbers */ const char *idx_fmt; /*entire index format */ /* * Fields associated with entire lines. * * ncols: Number of columns per line defaults to 80. * * per_line: If this field has a positive value then every Nth element * will be printed at the beginning of a line. * * pre: Each line of output contains an optional prefix area * before the data. This area can contain the index for the * first datum (represented by `%s') as well as other * constant text. The default value is `%s'. * * 1st: This is the format to print at the beginning of the first * line of output. The default value is the current value of * `pre' described above. * * cont: This is the format to print at the beginning of each line * which was continued because the line was split onto * multiple lines. This often happens with compound * data which is longer than one line of output. The default * value is the current value of the `pre' field * described above. * * suf: This character string will be appended to each line of * output. It should not contain line feeds. The default * is the empty string. * * sep: A character string to be printed after every line feed * defaulting to the empty string. It should end with a * line feed. * * multi_new: Indicates the algorithm to use when data elements tend to * occupy more than one line of output. The possible values * are (zero is the default): * * 0: No consideration. Each new element is printed * beginning where the previous element ended. * * 1: Print the current element beginning where the * previous element left off. But if that would result * in the element occupying more than one line and it * would only occupy one line if it started at the * beginning of a line, then it is printed at the * beginning of the next line. * * multi_new: If an element is continued onto additional lines then * should the following element begin on the next line? The * default is to start the next element on the same line * unless it wouldn't fit. * * indentlevel: a string that shows how far to indent if extra spacing * is needed. dumper uses it. */ int line_ncols; /*columns of output */ size_t line_per_line; /*max elements per line */ const char *line_pre; /*prefix at front of each line */ const char *line_1st; /*alternate pre. on first line */ const char *line_cont; /*alternate pre. on continuation*/ const char *line_suf; /*string to append to each line */ const char *line_sep; /*separates lines */ int line_multi_new; /*split multi-line outputs? */ const char *line_indent; /*for extra identation if we need it*/ /*used to skip the first set of checks for line length*/ int skip_first; /*flag used to hide or show the file number for obj refs*/ int obj_hidefileno; /*string used to format the output for the obje refs*/ const char *obj_format; /*flag used to hide or show the file number for dataset regions*/ int dset_hidefileno; /*string used to format the output for the dataset regions*/ const char *dset_format; const char *dset_blockformat_pre; const char *dset_ptformat_pre; const char *dset_ptformat; } h5dump_t; typedef struct dump_header{ const char *name; const char *filebegin; const char *fileend; const char *bootblockbegin; const char *bootblockend; const char *groupbegin; const char *groupend; const char *datasetbegin; const char *datasetend; const char *attributebegin; const char *attributeend; const char *datatypebegin; const char *datatypeend; const char *dataspacebegin; const char *dataspaceend; const char *databegin; const char *dataend; const char *softlinkbegin; const char *softlinkend; const char *fileblockbegin; const char *fileblockend; const char *bootblockblockbegin; const char *bootblockblockend; const char *groupblockbegin; const char *groupblockend; const char *datasetblockbegin; const char *datasetblockend; const char *attributeblockbegin; const char *attributeblockend; const char *datatypeblockbegin; const char *datatypeblockend; const char *dataspaceblockbegin; const char *dataspaceblockend; const char *datablockbegin; const char *datablockend; const char *softlinkblockbegin; const char *softlinkblockend; const char *strblockbegin; const char *strblockend; const char *enumblockbegin; const char *enumblockend; const char *dataspacedescriptionbegin; const char *dataspacedescriptionend; const char *dataspacedimbegin; const char *dataspacedimend; } dump_header; hid_t h5dump_fixtype(hid_t f_type); int h5dump_dset(FILE *stream, const h5dump_t *info, hid_t dset, hid_t p_typ, int indentlevel); int h5dump_mem(FILE *stream, const h5dump_t *info, hid_t type, hid_t space, void *mem, int indentlevel); hid_t h5dump_fopen(const char *fname, char *drivername, size_t drivername_len); /*if we get a new program that needs to use the library add its name here*/ typedef enum { UNKNOWN, H5LS, H5DUMP } ProgType; /*struct taken from the dumper. needed in table struct*/ typedef struct obj_t { unsigned long objno[2]; char objname[1024]; int displayed; int recorded; int objflag; } obj_t; /*struct for the tables that the find_objs function uses*/ typedef struct table_t { int size; int nobjs; obj_t *objs; } table_t; /*this struct stores the information that is passed to the find_objs function*/ typedef struct find_objs_t { int prefix_len; char *prefix; unsigned int threshold; /* should be 0 or 1 */ table_t *group_table; table_t *type_table; table_t *dset_table; int status; } find_objs_t; herr_t find_objs(hid_t group, const char *name, void *op_data); int search_obj (table_t *temp, unsigned long *); void init_table(table_t **temp); void init_prefix(char **temp, int); /* taken from h5dump.h */ #define ATTRIBUTE_DATA 0 #define DATASET_DATA 1 #define ENUM_DATA 2 #define COL 3 extern int indent; extern void indentation(int); extern int nCols; extern FILE *rawdatastream; /* output stream for raw data */ /* taken from h5dump.h*/ #define BOOT_BLOCK "BOOT_BLOCK" #define GROUPNAME "GROUP" #define DATASET "DATASET" #define ATTRIBUTE "ATTRIBUTE" #define DATATYPE "DATATYPE" #define DATASPACE "DATASPACE" #define DATA "DATA" #define SCALAR "SCALAR" #define SIMPLE "SIMPLE" #define COMPLEX "COMPLEX" #define STORAGELAYOUT "STORAGELAYOUT" #define COMPRESSION "COMPRESSION" #define EXTERNAL "EXTERNAL" #define SOFTLINK "SOFTLINK" #define HARDLINK "HARDLINK" #define NLINK "NLINK" #define FILENO "FILENO" #define OBJNO "OBJNO" #define STRSIZE "STRSIZE" #define STRPAD "STRPAD" #define CSET "CSET" #define CTYPE "CTYPE" #define CONCATENATOR "//" #define DATASET "DATASET" #define OBJID "OBJECTID" #define BEGIN "{" #define END "}" #endif /* Definitions of useful routines */ void print_version(const char *program_name);