/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the files COPYING and Copyright.html. COPYING can be found at the root * * of the source code distribution tree; Copyright.html can be found at the * * root level of an installed copy of the electronic HDF5 document set and * * is linked from the top-level documents page. It can also be found at * * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * * access to either file, you may request a copy from help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Programmer: Robb Matzke * Thursday, July 23, 1998 * * Purpose: A library for displaying the values of a dataset in a human * readable format. */ #include #include #include "h5tools.h" #include "h5tools_ref.h" #include "h5tools_str.h" #include "h5tools_utils.h" #include "H5private.h" #define SANITY_CHECK #define ALIGN(A,Z) ((((A) + (Z) - 1) / (Z)) * (Z)) /* global variables */ int compound_data; FILE *rawdatastream; /* should initialize to stdout but gcc moans about it */ int bin_output; /* binary output */ int bin_form; /* binary form */ /* local prototypes */ static int do_bin_output(FILE *stream, hsize_t nelmts, hid_t tid, void *_mem); static int render_bin_output(FILE *stream, hid_t tid, void *_mem); /* module-scoped variables */ static int h5tools_init_g; /* if h5tools lib has been initialized */ #ifdef H5_HAVE_PARALLEL static int h5tools_mpi_init_g; /* if MPI_Init() has been called */ #endif /* H5_HAVE_PARALLEL */ /* Names of VFDs */ static const char *drivernames[]={ "sec2", "family", "split", "multi", #ifdef H5_HAVE_STREAM "stream", #endif /* H5_HAVE_STREAM */ #ifdef H5_HAVE_PARALLEL "mpio", "mpiposix" #endif /* H5_HAVE_PARALLEL */ }; /* This enum should match the entries in the above drivers_list since they * are indexes into the drivers_list array. */ enum { SEC2_IDX = 0 ,FAMILY_IDX ,SPLIT_IDX ,MULTI_IDX #ifdef H5_HAVE_STREAM ,STREAM_IDX #endif /* H5_HAVE_STREAM */ #ifdef H5_HAVE_PARALLEL ,MPIO_IDX ,MPIPOSIX_IDX #endif /* H5_HAVE_PARALLEL */ } driver_idx; #define NUM_DRIVERS (sizeof(drivernames) / sizeof(drivernames[0])) /*------------------------------------------------------------------------- * Audience: Public * Chapter: H5Tools Library * Purpose: Initialize the H5 Tools library * Description: * This should be called before any other h5tools function is called. * Effect of any h5tools function called before this has been called is * undetermined. * Return: * None * Programmer: * Albert Cheng, 2000-10-31 * Modifications: *------------------------------------------------------------------------- */ void h5tools_init(void) { if (!h5tools_init_g) { if (!rawdatastream) rawdatastream = stdout; h5tools_init_g++; } } /*------------------------------------------------------------------------- * Audience: Public * Chapter: H5Tools Library * Purpose: Close the H5 Tools library * Description: * Close or release resources such as files opened by the library. This * should be called after all other h5tools functions have been called. * Effect of any h5tools function called after this has been called is * undetermined. * Return: * None * Programmer: * Albert Cheng, 2000-10-31 * Modifications: *------------------------------------------------------------------------- */ void h5tools_close(void) { if (h5tools_init_g) { if (rawdatastream && rawdatastream != stdout) { if (fclose(rawdatastream)) perror("closing rawdatastream"); else rawdatastream = NULL; } /* Clean up the reference path table, if it's been used */ term_ref_path_table(); /* Shut down the library */ H5close(); h5tools_init_g = 0; } } /*------------------------------------------------------------------------- * Audience: Private * Chapter: H5Tools Library * Purpose: Get a FAPL for a driver * Description: * Get a FAPL for a given VFL driver name. * Return: * None * Programmer: * Quincey Koziol, 2004-02-04 * Modifications: * Pedro Vicente Nunes, Thursday, July 27, 2006 * Added error return conditions for the H5Pset_fapl calls *------------------------------------------------------------------------- */ static hid_t h5tools_get_fapl(hid_t fapl, const char *driver, unsigned *drivernum) { hid_t new_fapl; /* Copy of file access property list passed in, or new property list */ /* Make a copy of the FAPL, for the file open call to use, eventually */ if(fapl == H5P_DEFAULT) { if((new_fapl = H5Pcreate(H5P_FILE_ACCESS)) < 0) goto error; } /* end if */ else { if((new_fapl = H5Pcopy(fapl)) < 0) goto error; } /* end else */ /* Determine which driver the user wants to open the file with. Try * that driver. If it can't open it, then fail. */ if(!strcmp(driver, drivernames[SEC2_IDX])) { /* SEC2 driver */ if(H5Pset_fapl_sec2(new_fapl) < 0) goto error; if(drivernum) *drivernum = SEC2_IDX; } else if(!strcmp(driver, drivernames[FAMILY_IDX])) { /* FAMILY Driver */ /* Set member size to be 0 to indicate the current first member size * is the member size. */ if(H5Pset_fapl_family(new_fapl, (hsize_t)0, H5P_DEFAULT) < 0) goto error; if(drivernum) *drivernum = FAMILY_IDX; } else if(!strcmp(driver, drivernames[SPLIT_IDX])) { /* SPLIT Driver */ if(H5Pset_fapl_split(new_fapl, "-m.h5", H5P_DEFAULT, "-r.h5", H5P_DEFAULT) < 0) goto error; if(drivernum) *drivernum = SPLIT_IDX; } else if(!strcmp(driver, drivernames[MULTI_IDX])) { /* MULTI Driver */ if(H5Pset_fapl_multi(new_fapl, NULL, NULL, NULL, NULL, TRUE) < 0) goto error; if(drivernum) *drivernum = MULTI_IDX; #ifdef H5_HAVE_STREAM } else if(!strcmp(driver, drivernames[STREAM_IDX])) { /* STREAM Driver */ if(H5Pset_fapl_stream(new_fapl, NULL) < 0) goto error; if(drivernum) *drivernum = STREAM_IDX; #endif /* H5_HAVE_STREAM */ #ifdef H5_HAVE_PARALLEL } else if(!strcmp(driver, drivernames[MPIO_IDX])) { /* MPI-I/O Driver */ /* check if MPI has been initialized. */ if(!h5tools_mpi_init_g) MPI_Initialized(&h5tools_mpi_init_g); if(h5tools_mpi_init_g) { if(H5Pset_fapl_mpio(new_fapl, MPI_COMM_WORLD, MPI_INFO_NULL) < 0) goto error; if(drivernum) *drivernum = MPIO_IDX; } /* end if */ } else if (!strcmp(driver, drivernames[MPIPOSIX_IDX])) { /* MPI-I/O Driver */ /* check if MPI has been initialized. */ if(!h5tools_mpi_init_g) MPI_Initialized(&h5tools_mpi_init_g); if(h5tools_mpi_init_g) { if(H5Pset_fapl_mpiposix(new_fapl, MPI_COMM_WORLD, TRUE) < 0) goto error; if(drivernum) *drivernum = MPIPOSIX_IDX; } /* end if */ #endif /* H5_HAVE_PARALLEL */ } else { goto error; } return(new_fapl); error: if(new_fapl != H5P_DEFAULT) H5Pclose(new_fapl); return -1; } /*------------------------------------------------------------------------- * Audience: Public * Chapter: H5Tools Library * Purpose: Open a file with various VFL drivers. * Description: * Loop through the various types of VFL drivers trying to open FNAME. * If the HDF5 library is version 1.2 or less, then we have only the SEC2 * driver to try out. If the HDF5 library is greater than version 1.2, * then we have the FAMILY, SPLIT, and MULTI drivers to play with (and * the STREAM driver if H5_HAVE_STREAM is defined, that is). * * If DRIVER is non-NULL, then it will try to open the file with that * driver first. We assume that the user knows what they are doing so, if * we fail, then we won't try other file drivers. * Return: * On success, returns a file id for the opened file. If DRIVERNAME is * non-null then the first DRIVERNAME_SIZE-1 characters of the driver * name are copied into the DRIVERNAME array and null terminated. * * Otherwise, the function returns FAIL. If DRIVERNAME is non-null then * the first byte is set to the null terminator. * Programmer: * Lost in the mists of time. * Modifications: * Robb Matzke, 2000-06-23 * We only have to initialize driver[] on the first call, thereby * preventing memory leaks from repeated calls to H5Pcreate(). * * Robb Matzke, 2000-06-23 * Added DRIVERNAME_SIZE arg to prevent overflows when writing to * DRIVERNAME. * * Robb Matzke, 2000-06-23 * Added test to prevent coredump when the file could not be opened by * any driver. * * Robb Matzke, 2000-06-23 * Changed name from H5ToolsFopen() so it jives better with the names we * already have at the top of this source file. * * Thomas Radke, 2000-09-12 * Added Stream VFD to the driver[] array. * * Bill Wendling, 2001-01-10 * Changed macro behavior so that if we have a version other than 1.2.x * (i.e., > 1.2), then we do the drivers check. * * Bill Wendling, 2001-07-30 * Added DRIVER parameter so that the user can specify "try this driver" * instead of the default behaviour. If it fails to open the file with * that driver, this will fail completely (i.e., we won't try the other * drivers). We're assuming the user knows what they're doing. How UNIX * of us. *------------------------------------------------------------------------- */ hid_t h5tools_fopen(const char *fname, unsigned flags, hid_t fapl, const char *driver, char *drivername, size_t drivername_size) { unsigned drivernum; hid_t fid = FAIL; hid_t my_fapl = H5P_DEFAULT; if(driver && *driver) { /* Get the correct FAPL for the given driver */ if((my_fapl = h5tools_get_fapl(fapl, driver, &drivernum)) < 0) goto done; H5E_BEGIN_TRY { fid = H5Fopen(fname, flags, my_fapl); } H5E_END_TRY; if(fid == FAIL) goto done; } else { /* Try to open the file using each of the drivers */ for(drivernum = 0; drivernum < NUM_DRIVERS; drivernum++) { /* Get the correct FAPL for the given driver */ if((my_fapl = h5tools_get_fapl(fapl, drivernames[drivernum], NULL)) < 0) goto done; H5E_BEGIN_TRY { fid = H5Fopen(fname, flags, my_fapl); } H5E_END_TRY; if(fid != FAIL) break; else { /* Close the FAPL */ H5Pclose(my_fapl); my_fapl = H5P_DEFAULT; } /* end else */ } } /* Save the driver name */ if(drivername && drivername_size) { if(fid != FAIL) { strncpy(drivername, drivernames[drivernum], drivername_size); drivername[drivername_size - 1] = '\0'; } else { /*no file opened*/ drivername[0] = '\0'; } } done: if(my_fapl != H5P_DEFAULT) H5Pclose(my_fapl); return fid; } /*------------------------------------------------------------------------- * Audience: Public * Chapter: H5Tools Library * Purpose: Count the number of columns in a string. * Description: * Count the number of columns in a string. This is the number of * characters in the string not counting line-control characters. * Return: * On success, returns the width of the string. Otherwise this function * returns 0. * Programmer: * Robb Matzke, Tuesday, April 27, 1999 * Modifications: *------------------------------------------------------------------------- */ static size_t h5tools_ncols(const char *s) { register size_t i; for (i = 0; *s; s++) if (*s >= ' ') i++; return i; } /*------------------------------------------------------------------------- * Audience: Public * Chapter: H5Tools Library * Purpose: Emit a simple prefix to STREAM. * Description: * If /ctx->need_prefix/ is set then terminate the current line (if * applicable), calculate the prefix string, and display it at the start * of a line. * Return: * None * Programmer: * Robb Matzke, Monday, April 26, 1999 * Modifications: * Robb Matzke, 1999-09-29 * If a new prefix is printed then the current element number is set back * to zero. * pvn, 2004-07-08 * Added support for printing array indices: * the indentation is printed before the prefix (printed one indentation * level before) *------------------------------------------------------------------------- */ static void h5tools_simple_prefix(FILE *stream, const h5tool_format_t *info, h5tools_context_t *ctx, hsize_t elmtno, int secnum) { h5tools_str_t prefix; h5tools_str_t str; /*temporary for indentation */ size_t templength = 0; int i, indentlevel = 0; if (!ctx->need_prefix) return; memset(&prefix, 0, sizeof(h5tools_str_t)); memset(&str, 0, sizeof(h5tools_str_t)); /* Terminate previous line, if any */ if (ctx->cur_column) { fputs(OPT(info->line_suf, ""), stream); putc('\n', stream); fputs(OPT(info->line_sep, ""), stream); } /* Calculate new prefix */ h5tools_str_prefix(&prefix, info, elmtno, ctx->ndims, ctx->p_min_idx, ctx->p_max_idx, ctx); /* Write new prefix to output */ if (ctx->indent_level >= 0) { indentlevel = ctx->indent_level; } else { /* * This is because sometimes we don't print out all the header * info for the data (like the tattr-2.ddl example). If that happens * the ctx->indent_level is negative so we need to skip the above and * just print out the default indent levels. */ indentlevel = ctx->default_indent_level; } /* when printing array indices, print the indentation before the prefix the prefix is printed one indentation level before */ if (info->pindex) { for (i = 0; i < indentlevel-1; i++){ fputs(h5tools_str_fmt(&str, 0, info->line_indent), stream); } } if (elmtno == 0 && secnum == 0 && info->line_1st) fputs(h5tools_str_fmt(&prefix, 0, info->line_1st), stream); else if (secnum && info->line_cont) fputs(h5tools_str_fmt(&prefix, 0, info->line_cont), stream); else fputs(h5tools_str_fmt(&prefix, 0, info->line_pre), stream); templength = h5tools_str_len(&prefix); for (i = 0; i < indentlevel; i++){ /*we already made the indent for the array indices case */ if (!info->pindex) { fputs(h5tools_str_fmt(&prefix, 0, info->line_indent), stream); templength += h5tools_str_len(&prefix); } else { /*we cannot count the prefix for the array indices case */ templength += h5tools_str_len(&str); } } ctx->cur_column = ctx->prev_prefix_len = templength; ctx->cur_elmt = 0; ctx->need_prefix = 0; /* Free string */ h5tools_str_close(&prefix); h5tools_str_close(&str); } /*------------------------------------------------------------------------- * Audience: Public * Chapter: H5Tools Library * Purpose: Prints NELMTS data elements to output STREAM. * Description: * Prints some (NELMTS) data elements to output STREAM. The elements are * stored in _MEM as type TYPE and are printed according to the format * described in INFO. The CTX struct contains context information shared * between calls to this function. The FLAGS is a bit field that * indicates whether the data supplied in this call falls at the * beginning or end of the total data to be printed (START_OF_DATA and * END_OF_DATA). * Return: * None * Programmer: * Robb Matzke, Monday, April 26, 1999 * Modifications: * Robb Matzke, 1999-06-04 * The `container' argument is the optional dataset for reference types. * * Robb Matzke, 1999-09-29 * Understands the `per_line' property which indicates that every Nth * element should begin a new line. * * Robb Matzke, LLNL, 2003-06-05 * Do not dereference the memory for a variable-length string here. * Deref in h5tools_str_sprint() instead so recursive types are * handled correctly. * * Pedro Vicente Nunes, THG, 2005-10-19 * pass to the prefix in h5tools_simple_prefix the total position * instead of the current stripmine position i; this is necessary * to print the array indices * new field sm_pos in h5tools_context_t, the current stripmine element position *------------------------------------------------------------------------- */ void h5tools_dump_simple_data(FILE *stream, const h5tool_format_t *info, hid_t container, h5tools_context_t *ctx/*in,out*/, unsigned flags, hsize_t nelmts, hid_t type, void *_mem) { unsigned char *mem = (unsigned char*)_mem; hsize_t i; /*element counter */ char *s, *section; /*a section of output */ int secnum; /*section sequence number */ size_t size; /*size of each datum */ size_t ncols = 80; /*available output width */ h5tools_str_t buffer; /*string into which to render */ int multiline; /*datum was multiline */ hsize_t curr_pos; /* total data element position */ int elmt_counter = 0;/*counts the # elements printed. *I (ptl?) needed something that *isn't going to get reset when a new *line is formed. I'm going to use *this var to count elements and *break after we see a number equal *to the ctx->size_last_dim. */ /* binary dump */ if(bin_output) { do_bin_output(stream, nelmts, type, _mem); bin_output = 0; } /* end if */ else { /* Setup */ HDmemset(&buffer, 0, sizeof(h5tools_str_t)); size = H5Tget_size(type); if(info->line_ncols > 0) ncols = info->line_ncols; /* pass to the prefix in h5tools_simple_prefix the total position * instead of the current stripmine position i; this is necessary * to print the array indices */ curr_pos = ctx->sm_pos; h5tools_simple_prefix(stream, info, ctx, curr_pos, 0); for (i = 0; i < nelmts; i++, ctx->cur_elmt++, elmt_counter++) { /* Render the element */ h5tools_str_reset(&buffer); h5tools_str_sprint(&buffer, info, container, type, mem + i * size, ctx); if (i + 1 < nelmts || (flags & END_OF_DATA) == 0) h5tools_str_append(&buffer, "%s", OPT(info->elmt_suf1, ",")); s = h5tools_str_fmt(&buffer, 0, "%s"); /* * If the element would split on multiple lines if printed at our * current location... */ if (info->line_multi_new == 1 && (ctx->cur_column + h5tools_ncols(s) + strlen(OPT(info->elmt_suf2, " ")) + strlen(OPT(info->line_suf, ""))) > ncols) { if (ctx->prev_multiline) { /* * ... and the previous element also occupied more than one * line, then start this element at the beginning of a line. */ ctx->need_prefix = TRUE; } else if ((ctx->prev_prefix_len + h5tools_ncols(s) + strlen(OPT(info->elmt_suf2, " ")) + strlen(OPT(info->line_suf, ""))) <= ncols) { /* * ...but *could* fit on one line otherwise, then we * should end the current line and start this element on its * own line. */ ctx->need_prefix = TRUE; } } /* * We need to break after each row of a dimension---> we should * break at the end of the each last dimension well that is the * way the dumper did it before */ if (info->arr_linebreak && ctx->cur_elmt) { if (ctx->size_last_dim && (ctx->cur_elmt % ctx->size_last_dim) == 0) ctx->need_prefix = TRUE; if ((hsize_t)elmt_counter == ctx->size_last_dim) { ctx->need_prefix = TRUE; elmt_counter = 0; } } /* * If the previous element occupied multiple lines and this element * is too long to fit on a line then start this element at the * beginning of the line. */ if (info->line_multi_new == 1 && ctx->prev_multiline && (ctx->cur_column + h5tools_ncols(s) + strlen(OPT(info->elmt_suf2, " ")) + strlen(OPT(info->line_suf, ""))) > ncols) ctx->need_prefix = TRUE; /* * If too many elements have already been printed then we need to * start a new line. */ if (info->line_per_line > 0 && ctx->cur_elmt >= info->line_per_line) ctx->need_prefix = TRUE; /* * Each OPTIONAL_LINE_BREAK embedded in the rendered string can cause * the data to split across multiple lines. We display the sections * one-at a time. */ for (secnum = 0, multiline = 0; (section = strtok(secnum ? NULL : s, OPTIONAL_LINE_BREAK)); secnum++) { /* * If the current section plus possible suffix and end-of-line * information would cause the output to wrap then we need to * start a new line. */ /* * Added the info->skip_first because the dumper does not want * this check to happen for the first line */ if ((!info->skip_first || i) && (ctx->cur_column + strlen(section) + strlen(OPT(info->elmt_suf2, " ")) + strlen(OPT(info->line_suf, ""))) > ncols) ctx->need_prefix = 1; /* * Print the prefix or separate the beginning of this element * from the previous element. */ if (ctx->need_prefix) { if (secnum) multiline++; /* pass to the prefix in h5tools_simple_prefix the total * position instead of the current stripmine position i; * this is necessary to print the array indices */ curr_pos = ctx->sm_pos + i; h5tools_simple_prefix(stream, info, ctx, curr_pos, secnum); } else if ((i || ctx->continuation) && secnum == 0) { fputs(OPT(info->elmt_suf2, " "), stream); ctx->cur_column += strlen(OPT(info->elmt_suf2, " ")); } /* Print the section */ fputs(section, stream); ctx->cur_column += strlen(section); } ctx->prev_multiline = multiline; } h5tools_str_close(&buffer); }/* else bin */ } /*------------------------------------------------------------------------- * Audience: Public * Chapter: H5Tools Library * Purpose: Dump out a subset of a dataset. * Description: * Select a hyperslab from the dataset DSET using the parameters * specified in SSET. Dump this out to STREAM. * Return: * On success, return SUCCEED. Otherwise, the function returns FAIL. * Programmer: * Bill Wendling, Wednesday, 07. March 2001 * Modifications: * Pedro Vicente, 12 December 2006 * Add information to print array indices from the element position * The algorythm used is * Given an index I(z,y,x) its position from the beginning of an array * of sizes A(size_z, size_y,size_x) is given by * Position of I(z,y,x) = index_z * size_y * size_x * + index_y * size_x * + index_x * * Pedro Vicente, Quincey Koziol, 4 January 2007 * Introduced an outer loop for cases where dimensionality is greater * than 2D. In each iteration a 2D block is displayed by rows in a inner * loop. The remainning slower dimensions above the first 2 are incremented * one at a time in the outer loop * *------------------------------------------------------------------------- */ static herr_t h5tools_dump_simple_subset(FILE *stream, const h5tool_format_t *info, hid_t dset, hid_t p_type, struct subset_t *sset, int indentlevel) { herr_t ret; /* the value to return */ hid_t f_space; /* file data space */ size_t i; /* counters */ size_t j; /* counters */ hsize_t n; /* counters */ hsize_t zero = 0; /* vector of zeros */ unsigned int flags; /* buffer extent flags */ hsize_t total_size[H5S_MAX_RANK];/* total size of dataset*/ hsize_t elmtno; /* elemnt index */ hsize_t low[H5S_MAX_RANK]; /* low bound of hyperslab */ hsize_t high[H5S_MAX_RANK]; /* higher bound of hyperslab */ h5tools_context_t ctx; /* print context */ size_t p_type_nbytes; /* size of memory type */ hsize_t sm_size[H5S_MAX_RANK]; /* stripmine size */ hsize_t sm_nbytes; /* bytes per stripmine */ hsize_t sm_nelmts; /* elements per stripmine*/ unsigned char *sm_buf = NULL; /* buffer for raw data */ hid_t sm_space; /* stripmine data space */ hsize_t count; /* hyperslab count */ hsize_t outer_count; /* offset count */ unsigned int row_dim; /* index of row dimension */ int current_outer_dim; /* dimension for start */ hsize_t temp_start[H5S_MAX_RANK];/* temporary start inside offset count loop */ hsize_t max_start[H5S_MAX_RANK]; /* maximum start inside offset count loop */ hsize_t temp_count[H5S_MAX_RANK];/* temporary count inside offset count loop */ hsize_t temp_block[H5S_MAX_RANK];/* temporary block size used in loop */ int reset_dim; #if defined (SANITY_CHECK) hsize_t total_points = 1; /* to print */ hsize_t printed_points = 0; /* printed */ #endif ret = FAIL; /* be pessimistic */ f_space = H5Dget_space(dset); if (f_space == FAIL) goto done; /* * check that everything looks okay. the dimensionality must not be too * great and the dimensionality of the items selected for printing must * match the dimensionality of the dataset. */ memset(&ctx, 0, sizeof(ctx)); ctx.indent_level = indentlevel; ctx.need_prefix = 1; ctx.ndims = H5Sget_simple_extent_ndims(f_space); if ((size_t)ctx.ndims > NELMTS(sm_size)) goto done_close; /* assume entire data space to be printed */ if (ctx.ndims > 0) for (i = 0; i < (size_t)ctx.ndims; i++) ctx.p_min_idx[i] = 0; H5Sget_simple_extent_dims(f_space, total_size, NULL); ctx.size_last_dim = total_size[ctx.ndims - 1]; if (ctx.ndims == 1) row_dim = 0; else row_dim = ctx.ndims - 2; /* get the offset count */ outer_count = 1; if (ctx.ndims > 2) for (i = 0; i < (size_t)ctx.ndims - 2; i++) { /* consider block size */ outer_count = outer_count * sset->count[ i ] * sset->block[ i ]; } if(ctx.ndims>0) init_acc_pos(&ctx,total_size); /* calculate total number of points to print */ #if defined (SANITY_CHECK) for (i = 0; i < (size_t)ctx.ndims; i++) { total_points *= sset->count[ i ] * sset->block[ i ];; } #endif /* initialize temporary start, count and maximum start */ for (i = 0; i < (size_t)ctx.ndims; i++) { temp_start[ i ] = sset->start[ i ]; temp_count[ i ] = sset->count[ i ]; temp_block[ i ] = 1; /* block size is considered in temp_count later */ max_start[ i ] = 0; } if (ctx.ndims > 2) { for (i = 0; i < (size_t)ctx.ndims - 2; i++) { max_start[ i ] = temp_start[ i ] + sset->count[ i ]; temp_count[ i ] = 1; } } /* offset loop */ for (n = 0; n < outer_count; n++) { /* number of read iterations in inner loop, read by rows, to match 2D display */ if (ctx.ndims > 1) { /* count is the number of iterations to display all the rows consider how many blocks */ count = sset->count[ row_dim ] * sset->block[ row_dim ]; temp_count[ row_dim ] = 1; /* always 1 row at a time */ /* but consider the block size in temp_count for columns */ temp_count[ row_dim + 1 ] = sset->count[ row_dim + 1 ] * sset->block[ row_dim + 1 ]; } /* for the 1D case */ else { count = 1; } /* display loop */ for (; count > 0; temp_start[ row_dim ] += sset->stride[ row_dim ], count--) { /* calculate the potential number of elements we're going to print */ H5Sselect_hyperslab(f_space, H5S_SELECT_SET, temp_start, sset->stride, temp_count, temp_block); sm_nelmts = H5Sget_select_npoints(f_space); if (sm_nelmts == 0) { /* nothing to print */ ret = SUCCEED; goto done_close; } /* * determine the strip mine size and allocate a buffer. the strip mine is * a hyperslab whose size is manageable. */ sm_nbytes = p_type_nbytes = H5Tget_size(p_type); if (ctx.ndims > 0) for (i = ctx.ndims; i > 0; --i) { sm_size[i - 1] = MIN(total_size[i - 1], H5TOOLS_BUFSIZE / sm_nbytes); sm_nbytes *= sm_size[i - 1]; assert(sm_nbytes > 0); } assert(sm_nbytes == (hsize_t)((size_t)sm_nbytes)); /*check for overflow*/ sm_buf = malloc((size_t)sm_nelmts * p_type_nbytes); sm_space = H5Screate_simple(1, &sm_nelmts, NULL); H5Sselect_hyperslab(sm_space, H5S_SELECT_SET, &zero, NULL, &sm_nelmts, NULL); /* read the data */ if (H5Dread(dset, p_type, sm_space, f_space, H5P_DEFAULT, sm_buf) < 0) { H5Sclose(f_space); H5Sclose(sm_space); free(sm_buf); return FAIL; } /* print the data */ flags = START_OF_DATA; if (count == 1) flags |= END_OF_DATA; for (i = 0; i < ctx.ndims; i++) ctx.p_max_idx[i] = ctx.p_min_idx[i] + MIN(total_size[i], sm_size[i]); /* print array indices. get the lower bound of the hyperslab and calulate the element position at the start of hyperslab */ H5Sget_select_bounds(f_space,low,high); elmtno=0; for (i = 0; i < (size_t)ctx.ndims-1; i++) { hsize_t offset = 1; /* accumulation of the previous dimensions */ for (j = i+1; j < (size_t)ctx.ndims; j++) offset *= total_size[j]; elmtno+= low[i] * offset; } elmtno+= low[ctx.ndims - 1]; /* initialize the current stripmine position; this is necessary to print the array indices */ ctx.sm_pos = elmtno; h5tools_dump_simple_data(stream, info, dset, &ctx, flags, sm_nelmts, p_type, sm_buf); free(sm_buf); /* we need to jump to next line and update the index */ ctx.need_prefix = 1; ctx.continuation++; #if defined (SANITY_CHECK) printed_points += sm_nelmts; #endif } /* count */ if (ctx.ndims > 2) { /* dimension for start */ current_outer_dim = (ctx.ndims - 2) -1; /* set start to original from current_outer_dim up */ for (i = current_outer_dim + 1; i < ctx.ndims; i++) { temp_start[ i ] = sset->start[ i ]; } /* increment start dimension */ do { reset_dim = 0; temp_start[ current_outer_dim ]++; if (temp_start[ current_outer_dim ] >= max_start[ current_outer_dim ]) { temp_start[ current_outer_dim ] = sset->start[ current_outer_dim ]; /* consider block */ if ( sset->block[ current_outer_dim ] > 1 ) temp_start[ current_outer_dim ]++; current_outer_dim--; reset_dim = 1; } } while (current_outer_dim >= 0 && reset_dim); } /* ctx.ndims > 1 */ } /* outer_count */ #if defined (SANITY_CHECK) assert( printed_points == total_points ); #endif /* Terminate the output */ if (ctx.cur_column) { fputs(OPT(info->line_suf, ""), stream); putc('\n', stream); fputs(OPT(info->line_sep, ""), stream); } ret = SUCCEED; done_close: H5Sclose(f_space); done: return ret; } /*------------------------------------------------------------------------- * Audience: Public * Chapter: H5Tools Library * Purpose: Print some values from a dataset with a simple data space. * Description: * This is a special case of h5tools_dump_dset(). This function only * intended for dumping datasets -- it does strip mining and some other * things which are unnecessary for smaller objects such as attributes * (to print small objects like attributes simply read the attribute and * call h5tools_dump_simple_mem()). * Return: * On success, the function returns SUCCEED. Otherwise, the function * returns FAIL. * Programmer: * Robb Matzke, Thursday, July 23, 1998 * Modifications: *------------------------------------------------------------------------- */ static int h5tools_dump_simple_dset(FILE *stream, const h5tool_format_t *info, hid_t dset, hid_t p_type, int indentlevel) { hid_t f_space; /* file data space */ hsize_t elmtno; /* counter */ size_t i; /* counter */ int carry; /* counter carry value */ hsize_t zero[8]; /* vector of zeros */ unsigned int flags; /* buffer extent flags */ hsize_t total_size[H5S_MAX_RANK]; /* total size of dataset*/ /* Print info */ h5tools_context_t ctx; /* print context */ size_t p_type_nbytes; /* size of memory type */ hsize_t p_nelmts; /* total selected elmts */ /* Stripmine info */ hsize_t sm_size[H5S_MAX_RANK]; /* stripmine size */ hsize_t sm_nbytes; /* bytes per stripmine */ hsize_t sm_nelmts; /* elements per stripmine*/ unsigned char *sm_buf = NULL; /* buffer for raw data */ hid_t sm_space; /* stripmine data space */ /* Hyperslab info */ hsize_t hs_offset[H5S_MAX_RANK]; /* starting offset */ hsize_t hs_size[H5S_MAX_RANK]; /* size this pass */ hsize_t hs_nelmts; /* elements in request */ /* VL data special information */ unsigned int vl_data = 0; /* contains VL datatypes */ f_space = H5Dget_space(dset); if (f_space == FAIL) return FAIL; /* * Check that everything looks okay. The dimensionality must not be too * great and the dimensionality of the items selected for printing must * match the dimensionality of the dataset. */ memset(&ctx, 0, sizeof(ctx)); ctx.indent_level = indentlevel; ctx.need_prefix = 1; ctx.ndims = H5Sget_simple_extent_ndims(f_space); if ((size_t)ctx.ndims > NELMTS(sm_size)) { H5Sclose(f_space); return FAIL; } /* Assume entire data space to be printed */ if (ctx.ndims > 0) for (i = 0; i < (size_t)ctx.ndims; i++) ctx.p_min_idx[i] = 0; H5Sget_simple_extent_dims(f_space, total_size, NULL); /* calculate the number of elements we're going to print */ p_nelmts = 1; if (ctx.ndims > 0) { for (i = 0; i < ctx.ndims; i++) p_nelmts *= total_size[i]; ctx.size_last_dim = (total_size[ctx.ndims - 1]); } /* end if */ else ctx.size_last_dim = 0; if (p_nelmts == 0) { /* nothing to print */ H5Sclose(f_space); return SUCCEED; } /* Check if we have VL data in the dataset's datatype */ if (H5Tdetect_class(p_type, H5T_VLEN) == TRUE) vl_data = TRUE; /* * Determine the strip mine size and allocate a buffer. The strip mine is * a hyperslab whose size is manageable. */ sm_nbytes = p_type_nbytes = H5Tget_size(p_type); if (ctx.ndims > 0) { for (i = ctx.ndims; i > 0; --i) { sm_size[i - 1] = MIN(total_size[i - 1], H5TOOLS_BUFSIZE / sm_nbytes); sm_nbytes *= sm_size[i - 1]; assert(sm_nbytes > 0); } } assert(sm_nbytes == (hsize_t)((size_t)sm_nbytes)); /*check for overflow*/ sm_buf = malloc((size_t)sm_nbytes); sm_nelmts = sm_nbytes / p_type_nbytes; sm_space = H5Screate_simple(1, &sm_nelmts, NULL); if(ctx.ndims>0) init_acc_pos(&ctx,total_size); /* The stripmine loop */ memset(hs_offset, 0, sizeof hs_offset); memset(zero, 0, sizeof zero); for (elmtno = 0; elmtno < p_nelmts; elmtno += hs_nelmts) { /* Calculate the hyperslab size */ if (ctx.ndims > 0) { for (i = 0, hs_nelmts = 1; i < ctx.ndims; i++) { hs_size[i] = MIN(total_size[i] - hs_offset[i], sm_size[i]); ctx.p_max_idx[i] = ctx.p_min_idx[i] + hs_size[i]; hs_nelmts *= hs_size[i]; } H5Sselect_hyperslab(f_space, H5S_SELECT_SET, hs_offset, NULL, hs_size, NULL); H5Sselect_hyperslab(sm_space, H5S_SELECT_SET, zero, NULL, &hs_nelmts, NULL); } else { H5Sselect_all(f_space); H5Sselect_all(sm_space); hs_nelmts = 1; } /* Read the data */ if (H5Dread(dset, p_type, sm_space, f_space, H5P_DEFAULT, sm_buf) < 0) { H5Sclose(f_space); H5Sclose(sm_space); free(sm_buf); return FAIL; } /* Print the data */ flags = (elmtno == 0) ? START_OF_DATA : 0; flags |= ((elmtno + hs_nelmts) >= p_nelmts) ? END_OF_DATA : 0; /* initialize the current stripmine position; this is necessary to print the array indices */ ctx.sm_pos = elmtno; h5tools_dump_simple_data(stream, info, dset, &ctx, flags, hs_nelmts, p_type, sm_buf); /* Reclaim any VL memory, if necessary */ if(vl_data) H5Dvlen_reclaim(p_type, sm_space, H5P_DEFAULT, sm_buf); /* Calculate the next hyperslab offset */ for (i = ctx.ndims, carry = 1; i > 0 && carry; --i) { ctx.p_min_idx[i - 1] = ctx.p_max_idx[i - 1]; hs_offset[i - 1] += hs_size[i - 1]; if (hs_offset[i - 1] == total_size[i - 1]) hs_offset[i - 1] = 0; else carry = 0; } ctx.continuation++; } /* Terminate the output */ if (ctx.cur_column) { fputs(OPT(info->line_suf, ""), stream); putc('\n', stream); fputs(OPT(info->line_sep, ""), stream); } H5Sclose(sm_space); H5Sclose(f_space); free(sm_buf); return SUCCEED; } /*------------------------------------------------------------------------- * Function: h5tools_dump_simple_mem * * Purpose: Print some values from memory with a simple data space. * This is a special case of h5tools_dump_mem(). * * Return: Success: SUCCEED * * Failure: FAIL * * Programmer: Robb Matzke * Thursday, July 23, 1998 * * Modifications: * *------------------------------------------------------------------------- */ static int h5tools_dump_simple_mem(FILE *stream, const h5tool_format_t *info, hid_t obj_id, hid_t type, hid_t space, void *mem, int indentlevel) { int i; /*counters */ hsize_t nelmts; /*total selected elmts */ h5tools_context_t ctx; /*printing context */ /* * Check that everything looks okay. The dimensionality must not be too * great and the dimensionality of the items selected for printing must * match the dimensionality of the dataset. */ memset(&ctx, 0, sizeof(ctx)); ctx.ndims = H5Sget_simple_extent_ndims(space); if ((size_t)ctx.ndims > NELMTS(ctx.p_min_idx)) return FAIL; ctx.indent_level = indentlevel; ctx.need_prefix = 1; /* Assume entire data space to be printed */ for (i = 0; i < ctx.ndims; i++) ctx.p_min_idx[i] = 0; H5Sget_simple_extent_dims(space, ctx.p_max_idx, NULL); for (i = 0, nelmts = 1; ctx.ndims != 0 && i < ctx.ndims; i++) nelmts *= ctx.p_max_idx[i] - ctx.p_min_idx[i]; if (nelmts == 0) return SUCCEED; /*nothing to print*/ if(ctx.ndims>0) { assert(ctx.p_max_idx[ctx.ndims - 1]==(hsize_t)((int)ctx.p_max_idx[ctx.ndims - 1])); ctx.size_last_dim = (int)(ctx.p_max_idx[ctx.ndims - 1]); } /* end if */ else ctx.size_last_dim = 0; if(ctx.ndims>0) init_acc_pos(&ctx,ctx.p_max_idx); /* Print it */ h5tools_dump_simple_data(stream, info, obj_id, &ctx, START_OF_DATA | END_OF_DATA, nelmts, type, mem); /* Terminate the output */ if (ctx.cur_column) { fputs(OPT(info->line_suf, ""), stream); putc('\n', stream); fputs(OPT(info->line_sep, ""), stream); } return SUCCEED; } /*------------------------------------------------------------------------- * Function: h5tools_dump_dset * * Purpose: Print some values from a dataset DSET to the file STREAM * after converting all types to P_TYPE (which should be a * native type). If P_TYPE is a negative value then it will be * computed from the dataset type using only native types. * * Note: This function is intended only for datasets since it does * some things like strip mining which are unnecessary for * smaller objects such as attributes. The easiest way to print * small objects is to read the object into memory and call * h5tools_dump_mem(). * * Return: Success: SUCCEED * * Failure: FAIL * * Programmer: Robb Matzke * Thursday, July 23, 1998 * * Modifications: * Robb Matzke, 1999-06-07 * If info->raw is set then the memory datatype will be the same * as the file datatype. * * Bill Wendling, 2001-02-27 * Renamed to ``h5tools_dump_dset'' and added the subsetting * parameter. * *------------------------------------------------------------------------- */ int h5tools_dump_dset(FILE *stream, const h5tool_format_t *info, hid_t dset, hid_t _p_type, struct subset_t *sset, int indentlevel) { hid_t f_space; hid_t p_type = _p_type; hid_t f_type; H5S_class_t space_type; int status = FAIL; h5tool_format_t info_dflt; /* Use default values */ if (!stream) stream = stdout; if (!info) { memset(&info_dflt, 0, sizeof info_dflt); info = &info_dflt; } if (p_type < 0) { f_type = H5Dget_type(dset); if (info->raw || bin_form == 1 ) p_type = H5Tcopy(f_type); else if (bin_form == 2 ) p_type = h5tools_get_little_endian_type(f_type); else if (bin_form == 3 ) p_type = h5tools_get_big_endian_type(f_type); else p_type = h5tools_get_native_type(f_type); H5Tclose(f_type); if (p_type < 0) goto done; } /* Check the data space */ f_space = H5Dget_space(dset); space_type = H5Sget_simple_extent_type(f_space); /* Print the data */ if (space_type == H5S_SIMPLE || space_type == H5S_SCALAR) { if (!sset) status = h5tools_dump_simple_dset(rawdatastream, info, dset, p_type, indentlevel); else status = h5tools_dump_simple_subset(rawdatastream, info, dset, p_type, sset, indentlevel); } else /* space is H5S_NULL */ status = SUCCEED; /* Close the dataspace */ H5Sclose(f_space); done: if (p_type != _p_type) H5Tclose(p_type); return status; } /*------------------------------------------------------------------------- * Function: h5tools_dump_mem * * Purpose: Displays the data contained in MEM. MEM must have the * specified data TYPE and SPACE. Currently only simple data * spaces are allowed and only the `all' selection. * * Return: Success: SUCCEED * * Failure: FAIL * * Programmer: Robb Matzke * Wednesday, January 20, 1999 * * Modifications: * *------------------------------------------------------------------------- */ int h5tools_dump_mem(FILE *stream, const h5tool_format_t *info, hid_t obj_id, hid_t type, hid_t space, void *mem, int indentlevel) { h5tool_format_t info_dflt; /* Use default values */ if (!stream) stream = stdout; if (!info) { memset(&info_dflt, 0, sizeof(info_dflt)); info = &info_dflt; } /* Check the data space */ if (H5Sis_simple(space) <= 0) return -1; return h5tools_dump_simple_mem(stream, info, obj_id, type, space, mem, indentlevel); } /*------------------------------------------------------------------------- * Function: init_acc_pos * * Purpose: initialize accumulator and matrix position * * Return: void * * Programmer: pvn * * Modifications: * *------------------------------------------------------------------------- */ void init_acc_pos(h5tools_context_t *ctx, hsize_t *dims) { int i; assert(ctx->ndims); ctx->acc[ctx->ndims-1]=1; for(i=(ctx->ndims-2); i>=0; i--) { ctx->acc[i]=ctx->acc[i+1] * dims[i+1]; } for ( i = 0; i < ctx->ndims; i++) ctx->pos[i]=0; } /*------------------------------------------------------------------------- * Function: do_bin_output * * Purpose: Dump memory buffer to a binary file stream * * Return: Success: SUCCEED * Failure: FAIL * * Programmer: Pedro Vicente Nunes * Friday, June 2, 2006 * * Modifications: * *------------------------------------------------------------------------- */ static int do_bin_output(FILE *stream, hsize_t nelmts, hid_t tid, void *_mem) { unsigned char *mem = (unsigned char*)_mem; size_t size; /* datum size */ hsize_t i; /* element counter */ size = H5Tget_size(tid); for (i = 0; i < nelmts; i++) { if (render_bin_output(stream,tid,mem + i * size)<0) { printf("\nError in writing binary stream\n"); return FAIL; } } return SUCCEED; } /*------------------------------------------------------------------------- * Function: render_bin_output * * Purpose: Write one element of memory buffer to a binary file stream * * Return: Success: SUCCEED * Failure: FAIL * * Programmer: Pedro Vicente Nunes * Friday, June 2, 2006 * * Modifications: * *------------------------------------------------------------------------- */ static int render_bin_output(FILE *stream, hid_t tid, void *_mem) { #if 0 #define DEBUG_H5DUMP_BIN 1 #endif unsigned char *mem = (unsigned char*)_mem; size_t size; /* datum size */ float tempfloat; double tempdouble; unsigned long_long tempullong; long_long templlong; unsigned long tempulong; long templong; unsigned int tempuint; int tempint; unsigned short tempushort; short tempshort; unsigned char tempuchar; char tempschar; #if H5_SIZEOF_LONG_DOUBLE !=0 long double templdouble; #endif #ifdef DEBUG_H5DUMP_BIN static char fmt_llong[8], fmt_ullong[8]; if (!fmt_llong[0]) { sprintf(fmt_llong, "%%%sd", H5_PRINTF_LL_WIDTH); sprintf(fmt_ullong, "%%%su", H5_PRINTF_LL_WIDTH); } #endif size = H5Tget_size(tid); if (H5Tequal(tid, H5T_NATIVE_FLOAT)) { memcpy(&tempfloat, mem, sizeof(float)); #ifdef DEBUG_H5DUMP_BIN fprintf(stream, "%g ", tempfloat); #else if (1 != fwrite(&tempfloat, size, 1, stream)) return FAIL; #endif } else if (H5Tequal(tid, H5T_NATIVE_DOUBLE)) { memcpy(&tempdouble, mem, sizeof(double)); #ifdef DEBUG_H5DUMP_BIN fprintf(stream, "%g ", tempdouble); #else if (1 != fwrite(&tempdouble, size, 1, stream)) return FAIL; #endif } #if H5_SIZEOF_LONG_DOUBLE !=0 else if (H5Tequal(tid, H5T_NATIVE_LDOUBLE)) { memcpy(&templdouble, mem, sizeof(long double)); #ifdef DEBUG_H5DUMP_BIN fprintf(stream, "%Lf ", templdouble); #else if (1 != fwrite(&templdouble, size, 1, stream)) return FAIL; #endif } #endif else if (H5T_STRING == H5Tget_class(tid)) { unsigned int i; H5T_str_t pad; char *s; pad = H5Tget_strpad(tid); if(H5Tis_variable_str(tid)) { s = *(char**)mem; if(s!=NULL) size = HDstrlen(s); } else { s = (char *)mem; size = H5Tget_size(tid); } for (i=0; i= 1 && ndims <= H5S_MAX_RANK); /* calculate the number of array elements */ for (k = 0, nelmts = 1; k < ndims; k++) { temp_nelmts = nelmts; temp_nelmts *= dims[k]; nelmts = (size_t)temp_nelmts; } /* dump the array element */ for (i = 0; i < nelmts; i++) { if (render_bin_output(stream,memb,mem + i * size)<0) return FAIL; } H5Tclose(memb); } else if (H5Tget_class(tid) == H5T_VLEN) { unsigned int i; hsize_t nelmts; hid_t memb; /* get the VL sequences's base datatype for each element */ memb = H5Tget_super(tid); size = H5Tget_size(memb); /* Get the number of sequence elements */ nelmts = ((hvl_t *)mem)->len; for (i = 0; i < nelmts; i++) { /* dump the array element */ if (render_bin_output(stream,memb,((char *)(((hvl_t *)mem)->p)) + i * size)<0) return FAIL; } H5Tclose(memb); } else { size_t i; if (1==size) { #ifdef DEBUG_H5DUMP_BIN fprintf(stream, "0x%02x", mem[0]); #else if (1 != fwrite(&mem[0], size, 1, stream)) return FAIL; #endif } else { for (i = 0; i < size; i++) { #ifdef DEBUG_H5DUMP_BIN fprintf(stream, "%s%02x", i?":":"", mem[i]); #else if (1 != fwrite(&mem[i], sizeof(char), 1, stream)) return FAIL; #endif } /*i*/ }/*else 1 */ } return SUCCEED; }