# Makefile.in generated by automake 1.9.5 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Copyright by the Board of Trustees of the University of Illinois. # All rights reserved. # # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the files COPYING and Copyright.html. COPYING can be found at the root # of the source code distribution tree; Copyright.html can be found at the # root level of an installed copy of the electronic HDF5 document set and # is linked from the top-level documents page. It can also be found at # http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have # access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. # # HDF5 Library Makefile(.in) # SOURCES = h5debug.c h5repart.c h5repart_gentest.c h5stat.c repart_test.c srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../.. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(srcdir)/h5cc.in $(srcdir)/testh5repart.sh.in \ $(srcdir)/testh5stat.sh.in $(top_srcdir)/config/commence.am \ $(top_srcdir)/config/conclude.am check_PROGRAMS = $(am__EXEEXT_1) repart_test$(EXEEXT) bin_PROGRAMS = h5debug$(EXEEXT) h5repart$(EXEEXT) h5stat$(EXEEXT) subdir = tools/misc ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/src/H5config.h CONFIG_CLEAN_FILES = h5cc testh5repart.sh testh5stat.sh am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) am__EXEEXT_1 = h5repart_gentest$(EXEEXT) PROGRAMS = $(bin_PROGRAMS) h5debug_SOURCES = h5debug.c h5debug_OBJECTS = h5debug.$(OBJEXT) h5debug_LDADD = $(LDADD) am__DEPENDENCIES_1 = $(top_builddir)/tools/lib/libh5tools.la am__DEPENDENCIES_2 = $(top_builddir)/src/libhdf5.la h5debug_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_2) h5repart_SOURCES = h5repart.c h5repart_OBJECTS = h5repart.$(OBJEXT) h5repart_LDADD = $(LDADD) h5repart_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_2) h5repart_gentest_SOURCES = h5repart_gentest.c h5repart_gentest_OBJECTS = h5repart_gentest.$(OBJEXT) h5repart_gentest_LDADD = $(LDADD) h5repart_gentest_DEPENDENCIES = $(am__DEPENDENCIES_1) \ $(am__DEPENDENCIES_2) h5stat_SOURCES = h5stat.c h5stat_OBJECTS = h5stat.$(OBJEXT) h5stat_LDADD = $(LDADD) h5stat_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_2) repart_test_SOURCES = repart_test.c repart_test_OBJECTS = repart_test.$(OBJEXT) repart_test_LDADD = $(LDADD) repart_test_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_2) binSCRIPT_INSTALL = $(INSTALL_SCRIPT) SCRIPTS = $(bin_SCRIPTS) DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = h5debug.c h5repart.c h5repart_gentest.c h5stat.c \ repart_test.c DIST_SOURCES = h5debug.c h5repart.c h5repart_gentest.c h5stat.c \ repart_test.c ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) # Set the paths for AFS installs of autotools for Linux machines # Ideally, these tools should never be needed during the build. ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake AWK = @AWK@ BUILD_ALL_CONDITIONAL_FALSE = @BUILD_ALL_CONDITIONAL_FALSE@ BUILD_ALL_CONDITIONAL_TRUE = @BUILD_ALL_CONDITIONAL_TRUE@ BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@ BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@ BUILD_FORTRAN_CONDITIONAL_FALSE = @BUILD_FORTRAN_CONDITIONAL_FALSE@ BUILD_FORTRAN_CONDITIONAL_TRUE = @BUILD_FORTRAN_CONDITIONAL_TRUE@ BUILD_HDF5_HL_CONDITIONAL_FALSE = @BUILD_HDF5_HL_CONDITIONAL_FALSE@ BUILD_HDF5_HL_CONDITIONAL_TRUE = @BUILD_HDF5_HL_CONDITIONAL_TRUE@ BUILD_PARALLEL_CONDITIONAL_FALSE = @BUILD_PARALLEL_CONDITIONAL_FALSE@ BUILD_PARALLEL_CONDITIONAL_TRUE = @BUILD_PARALLEL_CONDITIONAL_TRUE@ BYTESEX = @BYTESEX@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CC_VERSION = @CC_VERSION@ # H5_CFLAGS holds flags that should be used as CFLAGS when building hdf5, # but which shouldn't be exported to h5cc for building other programs. CFLAGS = @CFLAGS@ @H5_CFLAGS@ CONFIG_DATE = @CONFIG_DATE@ CONFIG_MODE = @CONFIG_MODE@ CONFIG_USER = @CONFIG_USER@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ @H5_CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ @H5_CXXFLAGS@ CXX_SHARED_CONDITIONAL_FALSE = @CXX_SHARED_CONDITIONAL_FALSE@ CXX_SHARED_CONDITIONAL_TRUE = @CXX_SHARED_CONDITIONAL_TRUE@ CYGPATH_W = @CYGPATH_W@ DEBUG_PKG = @DEBUG_PKG@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DIRECT_VFD_CONDITIONAL_FALSE = @DIRECT_VFD_CONDITIONAL_FALSE@ DIRECT_VFD_CONDITIONAL_TRUE = @DIRECT_VFD_CONDITIONAL_TRUE@ DYNAMIC_DIRS = @DYNAMIC_DIRS@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ F77 = @F77@ # Make sure that these variables are exported to the Makefiles F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ FCFLAGS = @FCFLAGS@ @H5_FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FFLAGS = @FFLAGS@ FILTERS = @FILTERS@ FORTRAN_SHARED_CONDITIONAL_FALSE = @FORTRAN_SHARED_CONDITIONAL_FALSE@ FORTRAN_SHARED_CONDITIONAL_TRUE = @FORTRAN_SHARED_CONDITIONAL_TRUE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ H5_FCFLAGS = @H5_FCFLAGS@ H5_LONE_COLON = @H5_LONE_COLON@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HDF5_INTERFACES = @HDF5_INTERFACES@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ HSIZET = @HSIZET@ HSIZE_T = @HSIZE_T@ HSSIZE_T = @HSSIZE_T@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_STATIC_EXEC = @LT_STATIC_EXEC@ MAINT = @MAINT@ MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ MPE = @MPE@ OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PTHREAD = @PTHREAD@ RANLIB = @RANLIB@ ROOT = @ROOT@ RUNPARALLEL = @RUNPARALLEL@ RUNSERIAL = @RUNSERIAL@ R_INTEGER = @R_INTEGER@ R_LARGE = @R_LARGE@ SEARCH = @SEARCH@ SETX = @SETX@ SET_MAKE = @SET_MAKE@ # Hardcode SHELL to be /bin/sh. Most machines have this shell, and # on at least one machine configure fails to detect its existence (janus). # Also, when HDF5 is configured on one machine but run on another, # configure's automatic SHELL detection may not work on the build machine. SHELL = /bin/sh SIZE_T = @SIZE_T@ STATIC_SHARED = @STATIC_SHARED@ STRIP = @STRIP@ TESTPARALLEL = @TESTPARALLEL@ TR = @TR@ TRACE_API = @TRACE_API@ USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ USE_FILTER_NBIT = @USE_FILTER_NBIT@ USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@ USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ USE_FILTER_SZIP = @USE_FILTER_SZIP@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_ct_FC = @ac_ct_FC@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = $(exec_prefix)/doc dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ # Install directories that automake doesn't know about includedir = $(exec_prefix)/include infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ # Shell commands used in Makefiles RM = rm -f CP = cp TIME = time # Some machines need a command to run executables; this is that command # so that our tests will run. # We use RUNTESTS instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. RUNTESTS = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la LIBH5TEST = $(top_builddir)/test/libh5test.la LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la # Scripts used to build examples # If only shared libraries have been installed, have h5cc build examples with # shared libraries instead of static libraries H5CC = $(bindir)/h5cc $(H5CCFLAGS) H5CC_PP = $(bindir)/h5pcc $(H5CCFLAGS) H5FC = $(bindir)/h5fc $(H5CCFLAGS) H5FC_PP = $(bindir)/h5pfc $(H5CCFLAGS) H5CPP = $(bindir)/h5c++ $(H5CCFLAGS) # The trace script; this is used on source files from the C library to # insert tracing macros. TRACE = perl $(top_srcdir)/bin/trace # .chkexe files are used to mark tests that have run successfully. # .chklog files are output from those tests. # *.clog are from the MPE option. # Temporary files. *.h5 are generated by h5repart_gentest. They should # copied to the testfiles/ directory if update is required. fst_family*.h5 # and scd_family*.h5 were created by setting the HDF5_NOCLEANUP variable. CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.h5 \ ../testfiles/fst_family*.h5 ../testfiles/scd_family*.h5 # Include src directory INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib #test script and program TEST_PROG = h5repart_gentest TEST_SCRIPT = testh5repart.sh testh5stat.sh check_SCRIPTS = $(TEST_SCRIPT) SCRIPT_DEPEND = h5repart$(EXEEXT) h5stat$(EXEEXT) bin_SCRIPTS = h5redeploy # Tell automake to clean h5redeploy script CLEANFILES = h5redeploy # These were generated by configure. Remove them only when distclean. DISTCLEANFILES = h5cc testh5repart.sh testh5stat.sh # All programs rely on hdf5 library and h5tools library LDADD = $(LIBH5TOOLS) $(LIBHDF5) @BUILD_PARALLEL_CONDITIONAL_FALSE@H5CC_NAME = h5cc # h5cc needs custom install and uninstall rules, since it may be # named h5pcc if hdf5 is being built in parallel mode. @BUILD_PARALLEL_CONDITIONAL_TRUE@H5CC_NAME = h5pcc # Automake needs to be taught how to build lib, progs, and tests targets. # These will be filled in automatically for the most part (e.g., # lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and # EXTRA_TEST variables are supplied to allow the user to force targets to # be built at certain times. LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/misc/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign tools/misc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh h5cc: $(top_builddir)/config.status $(srcdir)/h5cc.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ testh5repart.sh: $(top_builddir)/config.status $(srcdir)/testh5repart.sh.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ testh5stat.sh: $(top_builddir)/config.status $(srcdir)/testh5stat.sh.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; for p in $$list; do \ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ if test -f $$p \ || test -f $$p1 \ ; then \ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ else :; fi; \ done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; for p in $$list; do \ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ rm -f "$(DESTDIR)$(bindir)/$$f"; \ done clean-binPROGRAMS: @list='$(bin_PROGRAMS)'; for p in $$list; do \ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ echo " rm -f $$p $$f"; \ rm -f $$p $$f ; \ done clean-checkPROGRAMS: @list='$(check_PROGRAMS)'; for p in $$list; do \ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ echo " rm -f $$p $$f"; \ rm -f $$p $$f ; \ done h5debug$(EXEEXT): $(h5debug_OBJECTS) $(h5debug_DEPENDENCIES) @rm -f h5debug$(EXEEXT) $(LINK) $(h5debug_LDFLAGS) $(h5debug_OBJECTS) $(h5debug_LDADD) $(LIBS) h5repart$(EXEEXT): $(h5repart_OBJECTS) $(h5repart_DEPENDENCIES) @rm -f h5repart$(EXEEXT) $(LINK) $(h5repart_LDFLAGS) $(h5repart_OBJECTS) $(h5repart_LDADD) $(LIBS) h5repart_gentest$(EXEEXT): $(h5repart_gentest_OBJECTS) $(h5repart_gentest_DEPENDENCIES) @rm -f h5repart_gentest$(EXEEXT) $(LINK) $(h5repart_gentest_LDFLAGS) $(h5repart_gentest_OBJECTS) $(h5repart_gentest_LDADD) $(LIBS) h5stat$(EXEEXT): $(h5stat_OBJECTS) $(h5stat_DEPENDENCIES) @rm -f h5stat$(EXEEXT) $(LINK) $(h5stat_LDFLAGS) $(h5stat_OBJECTS) $(h5stat_LDADD) $(LIBS) repart_test$(EXEEXT): $(repart_test_OBJECTS) $(repart_test_DEPENDENCIES) @rm -f repart_test$(EXEEXT) $(LINK) $(repart_test_LDFLAGS) $(repart_test_OBJECTS) $(repart_test_LDADD) $(LIBS) install-binSCRIPTS: $(bin_SCRIPTS) @$(NORMAL_INSTALL) test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" @list='$(bin_SCRIPTS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ if test -f $$d$$p; then \ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \ $(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \ else :; fi; \ done uninstall-binSCRIPTS: @$(NORMAL_UNINSTALL) @list='$(bin_SCRIPTS)'; for p in $$list; do \ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ rm -f "$(DESTDIR)$(bindir)/$$f"; \ done mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5debug.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repart.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repart_gentest.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5stat.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/repart_test.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(mkdir_p) $(distdir)/../../config @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-am all-am: Makefile $(PROGRAMS) $(SCRIPTS) all-local installdirs: for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \ clean-libtool mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-libtool distclean-tags dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-exec-am: install-binPROGRAMS install-binSCRIPTS \ install-exec-local install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool mostlyclean-local pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \ uninstall-info-am uninstall-local .PHONY: CTAGS GTAGS all all-am all-local check check-TESTS check-am \ clean clean-binPROGRAMS clean-checkPROGRAMS clean-generic \ clean-libtool ctags distclean distclean-compile \ distclean-generic distclean-libtool distclean-tags distdir dvi \ dvi-am html html-am info info-am install install-am \ install-binPROGRAMS install-binSCRIPTS install-data \ install-data-am install-exec install-exec-am \ install-exec-local install-info install-info-am install-man \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ mostlyclean-local pdf pdf-am ps ps-am tags uninstall \ uninstall-am uninstall-binPROGRAMS uninstall-binSCRIPTS \ uninstall-info-am uninstall-local # List all build rules defined by HDF5 Makefiles as "PHONY" targets here. # This tells the Makefiles that these targets are not files to be built but # commands that should be executed even if a file with the same name already # exists. .PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \ build-tests check-clean check-install check-p check-s check-vfd \ install-doc lib progs tests uninstall-doc _exec_check-s _test install-exec-local: @$(INSTALL) h5cc $(bindir)/$(H5CC_NAME) uninstall-local: @$(RM) $(bindir)/$(H5CC_NAME) # How to build h5redeploy script h5redeploy: h5redeploy.in @cp $(srcdir)/$@.in $@ # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) build-tests: $(LIB) $(PROGS) $(TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else # in the directory (e.g., for Fortran type detection) lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ fi; \ done # General rule for recursive cleaning targets. Like the rule above, # but doesn't require building BUILT_SOURCES. check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ fi; \ done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. # UPDATE: docs no longer reside in this build tree, so this target # is depreciated. install-doc uninstall-doc: @echo "Nothing to be done." # clean up files generated by tests so they can be re-run. build-check-clean: $(RM) -rf $(CHECK_CLEANFILES) # run check-clean whenever mostlyclean is run mostlyclean-local: build-check-clean # check-install is just a synonym for installcheck check-install: installcheck # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # # Note that targets in TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test test _test: @$(MAKE) build-check-s @$(MAKE) build-check-p # Actual execution of check-s. build-check-s: $(LIB) $(PROGS) $(TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @$(MAKE) $(AM_MAKEFLAGS) _exec_check-s @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) # The dummy.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ tname=$(@:.chkexe_=)$(EXEEXT);\ log=$(@:.chkexe_=.chklog); \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\ else \ echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ echo "============================" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)"; \ cat $${log}; \ fi; \ fi # The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ cmd=$(@:.chkexe_=);\ tname=`basename $$cmd`;\ chkname=`basename $(@:.chkexe_=.chkexe)`;\ log=`basename $(@:.chkexe_=.chklog)`; \ echo "============================"; \ if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \ echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \ echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ else \ echo "Testing $${tname} $(TEST_FLAGS)"; \ echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ fi; \ echo "============================" >> $${log}; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $${chkname} || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ echo "============================" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)"; \ cat $${log}; \ fi; \ echo "============================"; \ fi # Actual execution of check-p. build-check-p: $(LIB) $(PROGS) $(TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @if test -n "$(TEST_PROG_PARA)"; then \ echo "**** Hint ****"; \ echo "Parallel test files reside in the current directory" \ "by default."; \ echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ echo " HDF5_PARAPREFIX=/PFS/user/me"; \ echo " export HDF5_PARAPREFIX"; \ echo " make check"; \ echo "**** end of Hint ****"; \ fi @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ RUNTESTS="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \ fi; \ done @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi # Run test with different Virtual File Driver check-vfd: $(LIB) $(PROGS) $(TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ echo "Testing Virtual File Driver $$vfd"; \ echo "============================"; \ $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \ HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \ fi; \ done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: