#! /bin/sh
#
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the COPYING file, which can be found at the root of the source code
# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
# If you do not have access to either file, you may request a copy from
# help@hdfgroup.org.
#
# Tests for the h5ls tool
srcdir=@srcdir@
TESTNAME=h5ls
EXIT_SUCCESS=0
EXIT_FAILURE=1
H5LS=../../src/h5ls/h5ls # The tool name
H5LS_BIN=`pwd`/$H5LS # The path of the tool binary
RM='rm -rf'
CMP='cmp -s'
DIFF='diff -c'
CP='cp'
NLINES=20 # Max. lines of output to display if test fails
DIRNAME='dirname'
LS='ls'
AWK='awk'
WORDS_BIGENDIAN="@WORDS_BIGENDIAN@"
nerrors=0
verbose=yes
h5haveexitcode=yes # default is yes
# source dirs
SRC_TOOLS="$srcdir/../.."
SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
# testfiles source dirs for tools
SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES"
SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES"
SRC_H5DIFF_TESTFILES="$SRC_TOOLS/test/h5diff/testfiles"
SRC_H5COPY_TESTFILES="$SRC_TOOLS/test/h5copy/testfiles"
SRC_H5REPACK_TESTFILES="$SRC_TOOLS/test/h5repack/testfiles"
SRC_H5JAM_TESTFILES="$SRC_TOOLS/test/h5jam/testfiles"
SRC_H5STAT_TESTFILES="$SRC_TOOLS/test/h5stat/testfiles"
SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/test/h5import/testfiles"
TEST_P_DIR=./testfiles
TESTDIR=./testfiles/vds
test -d $TEST_P_DIR || mkdir -p $TEST_P_DIR
test -d $TESTDIR || mkdir $TESTDIR
######################################################################
# test files
# --------------------------------------------------------------------
# All the test files copy from source directory to test directory
# NOTE: Keep this framework to add/remove test files.
# Any test files from other tools can be used in this framework.
# This list are also used for checking exist.
# Comment '#' without space can be used.
# --------------------------------------------------------------------
LIST_HDF5_TEST_FILES="
$SRC_H5LS_TESTFILES/vds/1_a.h5
$SRC_H5LS_TESTFILES/vds/1_b.h5
$SRC_H5LS_TESTFILES/vds/1_c.h5
$SRC_H5LS_TESTFILES/vds/1_d.h5
$SRC_H5LS_TESTFILES/vds/1_e.h5
$SRC_H5LS_TESTFILES/vds/1_f.h5
$SRC_H5LS_TESTFILES/vds/1_vds.h5
$SRC_H5LS_TESTFILES/vds/2_a.h5
$SRC_H5LS_TESTFILES/vds/2_b.h5
$SRC_H5LS_TESTFILES/vds/2_c.h5
$SRC_H5LS_TESTFILES/vds/2_d.h5
$SRC_H5LS_TESTFILES/vds/2_e.h5
$SRC_H5LS_TESTFILES/vds/2_vds.h5
$SRC_H5LS_TESTFILES/vds/3_1_vds.h5
$SRC_H5LS_TESTFILES/vds/3_2_vds.h5
$SRC_H5LS_TESTFILES/vds/4_0.h5
$SRC_H5LS_TESTFILES/vds/4_1.h5
$SRC_H5LS_TESTFILES/vds/4_2.h5
$SRC_H5LS_TESTFILES/vds/4_vds.h5
$SRC_H5LS_TESTFILES/vds/5_a.h5
$SRC_H5LS_TESTFILES/vds/5_b.h5
$SRC_H5LS_TESTFILES/vds/5_c.h5
$SRC_H5LS_TESTFILES/vds/5_vds.h5
"
LIST_OTHER_TEST_FILES="
$SRC_H5LS_TESTFILES/vds/tvds-1.ls
$SRC_H5LS_TESTFILES/vds/tvds-2.ls
$SRC_H5LS_TESTFILES/vds/tvds-3_1.ls
$SRC_H5LS_TESTFILES/vds/tvds-3_2.ls
$SRC_H5LS_TESTFILES/vds/tvds-4.ls
$SRC_H5LS_TESTFILES/vds/tvds-5.ls
"
# RUNSERIAL is used. Check if it can return exit code from executalbe correctly.
if [ -n "$RUNSERIAL_NOEXITCODE" ]; then
echo "***Warning*** Serial Exit Code is not passed back to shell corretly."
echo "***Warning*** Exit code checking is skipped."
h5haveexitcode=no
fi
#
# copy test files and expected output files from source dirs to test dir
#
COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES"
COPY_TESTFILES_TO_TESTDIR()
{
# copy test files. Used -f to make sure get a new copy
for tstfile in $COPY_TESTFILES
do
# ignore '#' comment
echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
RET=$?
if [ $RET -eq 1 ]; then
# skip cp if srcdir is same as destdir
# this occurs when build/test performed in source dir and
# make cp fail
SDIR=`$DIRNAME $tstfile`
INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
$CP -f $tstfile $TESTDIR
if [ $? -ne 0 ]; then
echo "Error: FAILED to copy $tstfile ."
# Comment out this to CREATE expected file
exit $EXIT_FAILURE
fi
fi
fi
done
}
CLEAN_TESTFILES_AND_TESTDIR()
{
# skip rm if srcdir is same as destdir
# this occurs when build/test performed in source dir and
# make cp fail
SDIR=$SRC_H5LS_TESTFILES/vds
INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
$RM $TESTDIR
fi
}
# Print a line-line message left justified in a field of 70 characters
# beginning with the word "Testing".
TESTING() {
SPACES=" "
echo "Testing $* $SPACES" |cut -c1-70 |tr -d '\012'
}
# Source in the output filter function definitions.
. $srcdir/../../../bin/output_filter.sh
# Run a test and print PASS or *FAIL*. For now, if h5ls can complete
# with exit status 0, consider it pass. If a test fails then increment
# the `nerrors' global variable and (if $verbose is set) display up to $NLINS
# lines of the actual output from the tool test. The actual output is not
# removed if $HDF5_NOCLEANUP has a non-zero value.
# Arguemnts:
# $1 -- actual output filename to use
# $2 and on -- argument for the h5ls tool
TOOLTEST() {
expect="$TESTDIR/$1"
actual="$TESTDIR/`basename $1 .ls`.out"
actual_err="$TESTDIR/`basename $1 .ls`.err"
actual_sav=${actual}-sav
actual_err_sav=${actual_err}-sav
shift
retvalexpect=$1
shift
# Run test.
# Stderr is included in stdout so that the diff can detect
# any unexpected output from that stream too.
TESTING $H5LS $@
(
cd $TESTDIR
$RUNSERIAL $H5LS_BIN "$@"
) >$actual 2>$actual_err
exitcode=$?
# save actual and actual_err in case they are needed later.
cp $actual $actual_sav
STDOUT_FILTER $actual
cp $actual_err $actual_err_sav
STDERR_FILTER $actual_err
cat $actual_err >> $actual
if [ $h5haveexitcode = 'yes' -a $exitcode -ne $retvalexpect ]; then
echo "*FAILED*"
nerrors="`expr $nerrors + 1`"
if [ yes = "$verbose" ]; then
echo "test returned with exit code $exitcode"
echo "test output: (up to $NLINES lines)"
head -$NLINES $actual
echo "***end of test output***"
echo ""
fi
elif [ ! -f $expect ]; then
# Create the expect file if it doesn't yet exist.
echo " CREATED"
cp $actual $expect
echo " Expected result (*.ls) missing"
nerrors="`expr $nerrors + 1`"
elif $CMP $expect $actual; then
echo " PASSED"
else
echo "*FAILED*"
echo " Expected result differs from actual result"
nerrors="`expr $nerrors + 1`"
test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /'
fi
# Clean up output file
if test -z "$HDF5_NOCLEANUP"; then
rm -f $actual $actual_err $actual_sav $actual_err_sav
fi
}
##############################################################################
##############################################################################
### T H E T E S T S ###
##############################################################################
##############################################################################
# prepare for test
COPY_TESTFILES_TO_TESTDIR
####### test for dataset vds ######
TOOLTEST tvds-1.ls 0 -w80 -v -S 1_vds.h5
TOOLTEST tvds-2.ls 0 -w80 -v -S 2_vds.h5
TOOLTEST tvds-3_1.ls 0 -w80 -v -S 3_1_vds.h5
TOOLTEST tvds-3_2.ls 0 -w80 -v -S 3_2_vds.h5
TOOLTEST tvds-4.ls 0 -w80 -v -S 4_vds.h5
TOOLTEST tvds-5.ls 0 -w80 -v -S 5_vds.h5
# Clean up temporary files/directories
CLEAN_TESTFILES_AND_TESTDIR
if test $nerrors -eq 0 ; then
echo "All $TESTNAME tests passed."
exit $EXIT_SUCCESS
else
echo "$TESTNAME tests failed with $nerrors errors."
exit $EXIT_FAILURE
fi