/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the COPYING file, which can be found at the root of the source code * * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. * * If you do not have access to either file, you may request a copy from * * help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* * Author: Albert Cheng of NCSA, May 1, 2001. * This is derived from code given to me by Robert Ross. * * NOTE: This code assumes that all command line arguments make it out to all * the processes that make up the parallel job, which isn't always the case. * So if it doesn't work on some platform, that might be why. */ #include "hdf5.h" #include "H5private.h" #ifdef H5_HAVE_PARALLEL #ifdef H5_STDC_HEADERS #include #include #include #include #include #endif #ifdef H5_HAVE_UNISTD_H #include #include #endif #ifdef H5_HAVE_SYS_STAT_H #include #endif #if defined(H5_TIME_WITH_SYS_TIME) # include # include #elif defined(H5_HAVE_SYS_TIME_H) # include #else # include #endif #include #ifndef MPI_FILE_NULL /*MPIO may be defined in mpi.h already */ # include #endif /* Macro definitions */ /* Verify: * if val is false (0), print mesg and if fatal is true (non-zero), die. */ #define H5FATAL 1 #define VRFY(val, mesg, fatal) do { \ if (!val) { \ printf("Proc %d: ", mynod); \ printf("*** Assertion failed (%s) at line %4d in %s\n", \ mesg, (int)__LINE__, __FILE__); \ if (fatal){ \ fflush(stdout); \ goto die_jar_jar_die; \ } \ } \ } while(0) #define RANK 1 #define MAX_PATH 1024 hsize_t dims[RANK]; /* dataset dim sizes */ hsize_t block[RANK], stride[RANK], count[RANK]; hssize_t start[RANK]; hid_t fid; /* HDF5 file ID */ hid_t acc_tpl; /* File access templates */ hid_t sid; /* Dataspace ID */ hid_t file_dataspace; /* File dataspace ID */ hid_t mem_dataspace; /* memory dataspace ID */ hid_t dataset; /* Dataset ID */ hsize_t opt_alignment = 1; hsize_t opt_threshold = 1; int opt_split_vfd = 0; char *meta_ext, *raw_ext; /* holds the meta and raw file extension if */ /* opt_split_vfd is set */ /* DEFAULT VALUES FOR OPTIONS */ int64_t opt_block = 1048576*16; int opt_iter = 1; int opt_stripe = -1; int opt_correct = 0; int amode = O_RDWR | O_CREAT; char opt_file[256] = "perftest.out"; char opt_pvfstab[256] = "notset"; int opt_pvfstab_set = 0; const char *FILENAME[] = { opt_file, NULL }; /* function prototypes */ static int parse_args(int argc, char **argv); extern int errno; /* globals needed for getopt */ extern char *optarg; int main(int argc, char **argv) { char *buf, *tmp, *buf2, *tmp2, *check; int i, j, mynod=0, nprocs=1, err, my_correct = 1, correct, myerrno; double stim, etim; double write_tim = 0; double read_tim = 0; double read_bw, write_bw; double max_read_tim, max_write_tim; double min_read_tim, min_write_tim; double ave_read_tim, ave_write_tim; int64_t iter_jump = 0; int64_t seek_position = 0; MPI_File fh; MPI_Status status; int nchars; char filename[MAX_PATH]; herr_t ret; /* Generic return value */ /* startup MPI and determine the rank of this process */ MPI_Init(&argc,&argv); MPI_Comm_size(MPI_COMM_WORLD, &nprocs); MPI_Comm_rank(MPI_COMM_WORLD, &mynod); /* parse the command line arguments */ parse_args(argc, argv); if (mynod == 0) printf("# Using hdf5-io calls.\n"); /* kindof a weird hack- if the location of the pvfstab file was * specified on the command line, then spit out this location into * the appropriate environment variable: */ #if H5_HAVE_SETENV /* no setenv or unsetenv */ if (opt_pvfstab_set) { if((setenv("PVFSTAB_FILE", opt_pvfstab, 1)) < 0){ perror("setenv"); goto die_jar_jar_die; } } #endif /* this is how much of the file data is covered on each iteration of * the test. used to help determine the seek offset on each * iteration */ iter_jump = nprocs * opt_block; /* setup a buffer of data to write */ if (!(tmp = (char *) malloc(opt_block + 256))) { perror("malloc"); goto die_jar_jar_die; } buf = tmp + 128 - (((long)tmp) % 128); /* align buffer */ if (opt_correct) { /* do the same buffer setup for verifiable data */ if (!(tmp2 = (char *) malloc(opt_block + 256))) { perror("malloc2"); goto die_jar_jar_die; } buf2 = tmp + 128 - (((long)tmp) % 128); } /* setup file access template with parallel IO access. */ if (opt_split_vfd){ hid_t mpio_pl; mpio_pl = H5Pcreate (H5P_FILE_ACCESS); VRFY((acc_tpl >= 0), "", H5FATAL); ret = H5Pset_fapl_mpio(mpio_pl, MPI_COMM_WORLD, MPI_INFO_NULL); VRFY((ret >= 0), "", H5FATAL); /* set optional allocation alignment */ if (opt_alignment*opt_threshold != 1){ ret = H5Pset_alignment(acc_tpl, opt_threshold, opt_alignment ); VRFY((ret >= 0), "H5Pset_alignment succeeded", !H5FATAL); } /* setup file access template */ acc_tpl = H5Pcreate (H5P_FILE_ACCESS); VRFY((acc_tpl >= 0), "", H5FATAL); ret = H5Pset_fapl_split(acc_tpl, meta_ext, mpio_pl, raw_ext, mpio_pl); VRFY((ret >= 0), "H5Pset_fapl_split succeeded", H5FATAL); ret = H5Pclose(mpio_pl); VRFY((ret >= 0), "H5Pclose mpio_pl succeeded", H5FATAL); }else{ /* setup file access template */ acc_tpl = H5Pcreate (H5P_FILE_ACCESS); VRFY((acc_tpl >= 0), "", H5FATAL); ret = H5Pset_fapl_mpio(acc_tpl, MPI_COMM_WORLD, MPI_INFO_NULL); VRFY((ret >= 0), "", H5FATAL); /* set optional allocation alignment */ if (opt_alignment*opt_threshold != 1){ ret = H5Pset_alignment(acc_tpl, opt_threshold, opt_alignment ); VRFY((ret >= 0), "H5Pset_alignment succeeded", !H5FATAL); } } h5_fixname_no_suffix(FILENAME[0], acc_tpl, filename, sizeof filename); /* create the parallel file */ fid = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, acc_tpl); VRFY((fid >= 0), "H5Fcreate succeeded", H5FATAL); /* define a contiquous dataset of opt_iter*nprocs*opt_block chars */ dims[0] = opt_iter * nprocs * opt_block; sid = H5Screate_simple(RANK, dims, NULL); VRFY((sid >= 0), "H5Screate_simple succeeded", H5FATAL); dataset = H5Dcreate2(fid, "Dataset1", H5T_NATIVE_CHAR, sid, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT); VRFY((dataset >= 0), "H5Dcreate2 succeeded", H5FATAL); /* create the memory dataspace and the file dataspace */ dims[0] = opt_block; mem_dataspace = H5Screate_simple(RANK, dims, NULL); VRFY((mem_dataspace >= 0), "", H5FATAL); file_dataspace = H5Dget_space(dataset); VRFY((file_dataspace >= 0), "H5Dget_space succeeded", H5FATAL); /* now each process writes a block of opt_block chars in round robbin * fashion until the whole dataset is covered. */ for(j=0; j < opt_iter; j++) { /* setup a file dataspace selection */ start[0] = (j*iter_jump)+(mynod*opt_block); stride[0] = block[0] = opt_block; count[0]= 1; ret=H5Sselect_hyperslab(file_dataspace, H5S_SELECT_SET, start, stride, count, block); VRFY((ret >= 0), "H5Sset_hyperslab succeeded", H5FATAL); if (opt_correct) /* fill in buffer for iteration */ { for (i=mynod+j, check=buf; i= 0), "H5Dwrite dataset1 succeeded", !H5FATAL); /* discover the ending time of the operation */ etim = MPI_Wtime(); write_tim += (etim - stim); /* we are done with this "write" iteration */ } /* close dataset and file */ ret=H5Dclose(dataset); VRFY((ret >= 0), "H5Dclose succeeded", H5FATAL); ret=H5Fclose(fid); VRFY((ret >= 0), "H5Fclose succeeded", H5FATAL); /* wait for everyone to synchronize at this point */ MPI_Barrier(MPI_COMM_WORLD); /* reopen the file for reading */ fid=H5Fopen(filename,H5F_ACC_RDONLY,acc_tpl); VRFY((fid >= 0), "", H5FATAL); /* open the dataset */ dataset = H5Dopen2(fid, "Dataset1", H5P_DEFAULT); VRFY((dataset >= 0), "H5Dopen succeeded", H5FATAL); /* we can re-use the same mem_dataspace and file_dataspace * the H5Dwrite used since the dimension size is the same. */ /* we are going to repeat the read the same pattern the write used */ for (j=0; j < opt_iter; j++) { /* setup a file dataspace selection */ start[0] = (j*iter_jump)+(mynod*opt_block); stride[0] = block[0] = opt_block; count[0]= 1; ret=H5Sselect_hyperslab(file_dataspace, H5S_SELECT_SET, start, stride, count, block); VRFY((ret >= 0), "H5Sset_hyperslab succeeded", H5FATAL); /* seek to the appropriate spot give the current iteration and * rank within the MPI processes */ /* discover the start time */ MPI_Barrier(MPI_COMM_WORLD); stim = MPI_Wtime(); /* read in the file data */ if (!opt_correct){ ret = H5Dread(dataset, H5T_NATIVE_CHAR, mem_dataspace, file_dataspace, H5P_DEFAULT, buf); } else{ ret = H5Dread(dataset, H5T_NATIVE_CHAR, mem_dataspace, file_dataspace, H5P_DEFAULT, buf2); } myerrno = errno; /* discover the end time */ etim = MPI_Wtime(); read_tim += (etim - stim); VRFY((ret >= 0), "H5Dwrite dataset1 succeeded", !H5FATAL); if (ret < 0) fprintf(stderr, "node %d, read error, loc = %Ld: %s\n", mynod, mynod*opt_block, strerror(myerrno)); /* if the user wanted to check correctness, compare the write * buffer to the read buffer */ if (opt_correct && memcmp(buf, buf2, opt_block)) { fprintf(stderr, "node %d, correctness test failed\n", mynod); my_correct = 0; MPI_Allreduce(&my_correct, &correct, 1, MPI_INT, MPI_MIN, MPI_COMM_WORLD); } /* we are done with this read iteration */ } /* close dataset and file */ ret=H5Dclose(dataset); VRFY((ret >= 0), "H5Dclose succeeded", H5FATAL); ret=H5Fclose(fid); VRFY((ret >= 0), "H5Fclose succeeded", H5FATAL); ret=H5Pclose(acc_tpl); VRFY((ret >= 0), "H5Pclose succeeded", H5FATAL); /* compute the read and write times */ MPI_Allreduce(&read_tim, &max_read_tim, 1, MPI_DOUBLE, MPI_MAX, MPI_COMM_WORLD); MPI_Allreduce(&read_tim, &min_read_tim, 1, MPI_DOUBLE, MPI_MIN, MPI_COMM_WORLD); MPI_Allreduce(&read_tim, &ave_read_tim, 1, MPI_DOUBLE, MPI_SUM, MPI_COMM_WORLD); /* calculate the average from the sum */ ave_read_tim = ave_read_tim / nprocs; MPI_Allreduce(&write_tim, &max_write_tim, 1, MPI_DOUBLE, MPI_MAX, MPI_COMM_WORLD); MPI_Allreduce(&write_tim, &min_write_tim, 1, MPI_DOUBLE, MPI_MIN, MPI_COMM_WORLD); MPI_Allreduce(&write_tim, &ave_write_tim, 1, MPI_DOUBLE, MPI_SUM, MPI_COMM_WORLD); /* calculate the average from the sum */ ave_write_tim = ave_write_tim / nprocs; /* print out the results on one node */ if (mynod == 0) { read_bw = ((int64_t)(opt_block*nprocs*opt_iter))/(max_read_tim*1000000.0); write_bw = ((int64_t)(opt_block*nprocs*opt_iter))/(max_write_tim*1000000.0); printf("nr_procs = %d, nr_iter = %d, blk_sz = %ld\n", nprocs, opt_iter, (long)opt_block); printf("# total_size = %ld\n", (long)(opt_block*nprocs*opt_iter)); printf("# Write: min_time = %f, max_time = %f, mean_time = %f\n", min_write_tim, max_write_tim, ave_write_tim); printf("# Read: min_time = %f, max_time = %f, mean_time = %f\n", min_read_tim, max_read_tim, ave_read_tim); printf("Write bandwidth = %f Mbytes/sec\n", write_bw); printf("Read bandwidth = %f Mbytes/sec\n", read_bw); if (opt_correct) { printf("Correctness test %s.\n", correct ? "passed" : "failed"); } } die_jar_jar_die: #if H5_HAVE_SETENV /* no setenv or unsetenv */ /* clear the environment variable if it was set earlier */ if (opt_pvfstab_set){ unsetenv("PVFSTAB_FILE"); } #endif free(tmp); if (opt_correct) free(tmp2); MPI_Finalize(); return(0); } static int parse_args(int argc, char **argv) { int c; while ((c = getopt(argc, argv, "s:b:i:f:p:a:2:c")) != EOF) { switch (c) { case 's': /* stripe */ opt_stripe = atoi(optarg); break; case 'b': /* block size */ opt_block = atoi(optarg); break; case 'i': /* iterations */ opt_iter = atoi(optarg); break; case 'f': /* filename */ strncpy(opt_file, optarg, 255); FILENAME[0] = opt_file; break; case 'p': /* pvfstab file */ strncpy(opt_pvfstab, optarg, 255); opt_pvfstab_set = 1; break; case 'a': /* aligned allocation. * syntax: -a/ * e.g., -a4096/512 allocate at 4096 bytes * boundary if request size >= 512. */ {char *p; opt_alignment = atoi(optarg); if (p=(char*)strchr(optarg, '/')) opt_threshold = atoi(p+1); } HDfprintf(stdout, "alignment/threshold=%Hu/%Hu\n", opt_alignment, opt_threshold); break; case '2': /* use 2-files, i.e., split file driver */ opt_split_vfd=1; /* get meta and raw file extension. */ /* syntax is , */ meta_ext = raw_ext = optarg; while (*raw_ext != '\0'){ if (*raw_ext == ','){ *raw_ext = '\0'; raw_ext++; break; } raw_ext++; } printf("split-file-vfd used: %s,%s\n", meta_ext, raw_ext); break; case 'c': /* correctness */ opt_correct = 1; break; case '?': /* unknown */ default: break; } } return(0); } /* * Local variables: * c-indent-level: 3 * c-basic-offset: 3 * tab-width: 3 * End: */ #else /* H5_HAVE_PARALLEL */ /* dummy program since H5_HAVE_PARALLEL is not configured in */ int main(int H5_ATTR_UNUSED argc, char H5_ATTR_UNUSED **argv) { printf("No parallel performance because parallel is not configured in\n"); return(0); } #endif /* H5_HAVE_PARALLEL */