path: root/bin/bbrelease

#!/bin/sh
#
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5.  The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the COPYING file, which can be found at the root of the source code
# distribution tree, or in https://www.hdfgroup.org/licenses.
# If you do not have access to either file, you may request a copy from
# help@hdfgroup.org.
#

# Make a release of hdf5.
#
#   NOTE:
#   This script differs from bin/release in that this has an added
#   --revision option to create private releases with the code revision
#   hash in the version strings.
#
#   This script can probably be merged into the original release script in
#   the future.

# Function definitions
#
# Print Usage page
USAGE()
{
cat << EOF
Usage: $0 -d <dir> [--docver BRANCHNAME] [-h] [--private] [--revision] <methods> ...
   -d DIR       The name of the directory where the release(s) should be
                placed.
   --docver BRANCHNAME  This is added for 1.8 and beyond to get the correct
                        version of documentation files from the hdf5docs
                        repository.  BRANCHNAME for v1.8 should be hdf5_1_8.
   -h           print the help page.
   --private    Make a private release with today's date in version information.
   --revision   Make a private release with the code revision number in version information.

This must be run at the top level of the source directory.
The other command-line options are the names of the programs to use
for compressing the resulting tar archive (if none are given then
"tar" is assumed):

    tar         -- use tar and don't do any compressing.
    gzip        -- use gzip with "-9" and append ".gz" to the output name.
    bzip2       -- use bzip2 with "-9" and append ".bz2" to the output name.
    zip         -- convert all text files to DOS style and form a zip file for Windows use.
    doc         -- produce the latest doc tree in addition to the archive.

An md5 checksum is produced for each archive created and stored in the md5 file.

Examples:

    $ bin/release -d /tmp
    /tmp/hdf5-1.8.13-RELEASE.txt
    /tmp/hdf5-1.8.13.md5
    /tmp/hdf5-1.8.13.tar

    $ bin/release -d /tmp gzip
    /tmp/hdf5-1.8.13-RELEASE.txt
    /tmp/hdf5-1.8.13.md5
    /tmp/hdf5-1.8.13.tar.gz

    $ bin/release -d /tmp tar gzip zip
    /tmp/hdf5-1.8.13-RELEASE.txt
    /tmp/hdf5-1.8.13.md5
    /tmp/hdf5-1.8.13.tar
    /tmp/hdf5-1.8.13.tar.gz
    /tmp/hdf5-1.8.13.tar.zip

EOF

}

# Function name: tar2zip
# Convert the release tarball to a Windows zipball.
#
# Steps:
# 1. untar the tarball in a temporary directory;
#    Note: do this in a temporary directory to avoid changing
#    the original source directory which may be around.
# 2. convert all its text files to DOS (LF-CR) style;
# 3. form a zip file which is usable by Windows users.
#
# Parameters:
# $1 version
# $2 release tarball
# $3 output zipball file name
#
# Returns 0 if successful; 1 otherwise
#
tar2zip()
{
    if [ $# -ne 3 ]; then
        echo "usage: tar2zip <tarfilename> <zipfilename>"
        return 1
    fi
    ztmpdir=/tmp/tmpdir$$
    mkdir -p $ztmpdir
    version=$1
    tarfile=$2
    zipfile=$3

    # step 1: untar tarball in ztmpdir
    (cd $ztmpdir; tar xf -) < $tarfile
    # sanity check
    if [ ! -d $ztmpdir/$version ]; then
        echo "untar did not create $ztmpdir/$version source dir"
        # cleanup
        rm -rf $ztmpdir
        return 1
    fi
    # step 2: convert text files
    # There maybe a simpler way to do this.
    # options used in unix2dos:
    # -k   Keep the date stamp
    # -q   quiet mode
    # grep redirect output to /dev/null because -q or -s are not portable.
    find $ztmpdir/$version | \
        while read inf; do \
            if file $inf | grep "$inf\: .*text" > /dev/null 2>&1 ; then \
                unix2dos -q -k $inf; \
            fi\
        done
    # step 3: make zipball
    # -9 maximum compression
    # -y Store symbolic links as such in the zip archive
    # -r recursive
    # -q quiet
    (cd $ztmpdir; zip -9 -y -r -q $version.zip $version)
    mv $ztmpdir/$version.zip $zipfile

    # cleanup
    rm -rf $ztmpdir
}

# This command must be run at the top level of the hdf5 source directory.
# Verify this requirement.
if [ ! \( -f configure.ac -a -f bin/bbrelease \) ]; then
    echo "$0 must be run at the top level of the hdf5 source directory"
    exit 1
fi

# Defaults
DEST=releases
VERS=`perl bin/h5vers`
VERS_OLD=
test "$VERS" || exit 1
verbose=yes
release_date=`date +%F`
today=`date +%Y%m%d`
pmode='no'
revmode='no'
tmpdir="../#release_tmp.$$"     # tmp work directory
DOC_URL=https://git@bitbucket.hdfgroup.org/scm/hdffv/hdf5doc.git
CPPLUS_RM_NAME=cpplus_RM

# Restore previous Version information
RESTORE_VERSION()
{
    if [ X-${VERS_OLD} != X- ]; then
        echo restoring version information back to $VERS_OLD
        rm -f config/lt_vers.am
        cp $tmpdir/lt_vers.am config/lt_vers.am
        bin/h5vers -s $VERS_OLD
        VERS_OLD=
    fi
}


# Command-line arguments
while [ -n "$1" ]; do
    arg=$1
    shift
    case "$arg" in
        -d)
            DEST=$1
            shift
            ;;
        -h)
            USAGE
            exit 0
            ;;
        --private)
            pmode=yes
            ;;
        --revision)
            revmode=yes
            ;;
        --docver)
            DOCVERSION=$1
            shift
            ;;
        -*)
            echo "Unknown switch: $arg" 1>&2
            USAGE
            exit 1
            ;;
        *)
            methods="$methods $arg"
            ;;
    esac
done

# Default method is tar
if [ "X$methods" = "X" ]; then
    methods="tar"
fi

# Create the temporary work directory.
if mkdir $tmpdir; then
    echo "temporary work directory for release.  "\
         "Can be deleted after release completes." > $tmpdir/README
else
    echo "Failed to mkdir tmpdir($tmpdir)"
    exit 1
fi

# setup restoration in case of abort.
trap RESTORE_VERSION 0

if [ X$pmode = Xyes ]; then
    VERS_OLD=$VERS
    # Copy old version of config/lt_vers.am, since it's hard to
    # "undo" changes to it.
    cp config/lt_vers.am $tmpdir
    # Set version information to m.n.r-of$today.
    # (h5vers does not correctly handle just m.n.r-$today.)
    VERS=`echo $VERS | sed -e s/-.*//`-of$today
    echo Private release of $VERS
    bin/h5vers -s $VERS
fi

if [ X$revmode = Xyes ]; then
    VERS_OLD=$VERS
    echo "Save old version $VERS_OLD for restoration later."
    # Copy old version of config/lt_vers.am, since it's hard to
    # "undo" changes to it.
    cp config/lt_vers.am $tmpdir
    branch=`git branch | grep '*' | awk '{print $NF}'`
    revision=`git rev-parse --short HEAD`
    # Set version information to m.n.r-r$revision.
    # (h5vers does not correctly handle just m.n.r-$today.)
    VERS=`echo $VERS | sed -e s/-.*//`-$revision
    echo Private release of $VERS
    HDF5_VERS=hdf5-$branch-$revision
    echo file base of $HDF5_VERS
    bin/h5vers -s $VERS
    # use a generic directory name for revision releases
    HDF5_IN_VERS=hdfsrc
else
    # Store hdf5-$VERS ("hdf5-1.7.51", e.g.) to a variable to avoid typos
    HDF5_VERS=hdf5-$VERS
    # directory name matches tar file name for non-revision releases
    HDF5_IN_VERS=$HDF5_VERS
fi

test "$verbose" && echo "Releasing $HDF5_VERS to $DEST" 1>&2
if [ ! -d $DEST ]; then
    echo "   Destination directory $DEST does not exist" 1>&2
    exit 1
fi

# Create a symlink to the source so files in the tarball have the prefix
# we want (gnu's --transform isn't portable)
ln -s `pwd` $tmpdir/$HDF5_IN_VERS || exit 1

# Save a backup copy of Makefile if exists.
test -f Makefile && mv Makefile $tmpdir/Makefile.x
cp -p Makefile.dist Makefile

# Update README.md and release_docs/RELEASE.txt with release information in
# line 1.
for f in README.md release_docs/RELEASE.txt; do
    echo "HDF5 version $VERS released on $release_date" >$f.x
    sed -e 1d $f >>$f.x
    mv $f.x $f
    # Make sure new files are of the right access mode
    chmod 644 $f
done

# develop is different than branches.
if [ "${DOCVERSION}" ]; then
    DOC_URL=https://git@bitbucket.hdfgroup.org/scm/hdffv/hdf5doc.git -b ${DOCVERSION}
fi

# Create the tar file
test "$verbose" && echo "   Running tar..." 1>&2
(cd "$tmpdir" && exec tar -ch --exclude-vcs -f "$HDF5_VERS.tar" "./$HDF5_IN_VERS" || exit 1 )

# Compress
MD5file=$HDF5_VERS.md5
cp /dev/null $DEST/$MD5file
for comp in $methods; do
    case $comp in
        tar)
            cp -p $tmpdir/$HDF5_VERS.tar $DEST/$HDF5_VERS.tar
            (cd $DEST; md5sum $HDF5_VERS.tar >> $MD5file)
            ;;
        gzip)
            test "$verbose" && echo "   Running gzip..." 1>&2
            gzip -9 <$tmpdir/$HDF5_VERS.tar >$DEST/$HDF5_VERS.tar.gz
            (cd $DEST; md5sum $HDF5_VERS.tar.gz >> $MD5file)
            ;;
        bzip2)
            test "$verbose" && echo "   Running bzip2..." 1>&2
            bzip2 -9 <$tmpdir/$HDF5_VERS.tar >$DEST/$HDF5_VERS.tar.bz2
            (cd $DEST; md5sum $HDF5_VERS.tar.bz2 >> $MD5file)
            ;;
        zip)
            test "$verbose" && echo "   Creating zip ball..." 1>&2
            tar2zip $HDF5_IN_VERS $tmpdir/$HDF5_VERS.tar $DEST/$HDF5_VERS.zip 1>&2
            (cd $DEST; md5sum $HDF5_VERS.zip >> $MD5file)
            ;;
        doc)
            if [ "${DOCVERSION}" = "" ]; then
                DOCVERSION=master
            fi
            test "$verbose" && echo "   Creating docs..." 1>&2
            # Check out docs from git repo
            (cd $tmpdir; git clone $DOC_URL > /dev/null) || exit 1
            # Create doxygen C++ RM
            (cd c++/src && doxygen cpp_doc_config > /dev/null ) || exit 1
            # Replace version of C++ RM with just-created version
            rm -rf $tmpdir/${DOCVERSION}/html/$CPPLUS_RM_NAME
            mv c++/src/$CPPLUS_RM_NAME $tmpdir/${DOCVERSION}/html/$CPPLUS_RM_NAME
            # Compress the docs and move them to the release area
            mv $tmpdir/$DOCVERSION $tmpdir/${HDF5_VERS}_docs
            (cd $tmpdir && tar cf ${HDF5_VERS}_docs.tar ${HDF5_VERS}_docs)
            mv $tmpdir/${HDF5_VERS}_docs.tar $DEST
            ;;
        *)
            echo "***Error*** Unknown method $comp"
            exit 1
            ;;
    esac
done

# Copy the RELEASE.txt to the release area.
cp release_docs/RELEASE.txt $DEST/$HDF5_VERS-RELEASE.txt

# Remove distributed Makefile and restore previous Makefile if existed.
rm -f Makefile
test -f $tmpdir/Makefile.x && mv $tmpdir/Makefile.x Makefile

# Restore OLD version information, then no need for trap.
if [ X$pmode = Xyes ] || [ X$revmode = Xyes ]; then
    echo "Restore the original version $VERS_OLD"
    RESTORE_VERSION
    trap 0
fi

# Remove temporary things
rm -rf $tmpdir

echo "DONE"

exit 0