path: root/c++/examples/Makefile.in

# Makefile.in generated by automake 1.9.5 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5.  The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html.  COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page.  It can also be found at
# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
#
# HDF5 Library Examples Makefile(.in)
#
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ../..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(top_srcdir)/config/commence.am \
	$(top_srcdir)/config/conclude.am
subdir = c++/examples
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/H5config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

# Set the paths for AFS installs of autotools for Linux machines
# Ideally, these tools should never be needed during the build.
ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf
AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader
AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake
AWK = @AWK@
BUILD_ALL_CONDITIONAL_FALSE = @BUILD_ALL_CONDITIONAL_FALSE@
BUILD_ALL_CONDITIONAL_TRUE = @BUILD_ALL_CONDITIONAL_TRUE@
BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@
BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@
BUILD_FORTRAN_CONDITIONAL_FALSE = @BUILD_FORTRAN_CONDITIONAL_FALSE@
BUILD_FORTRAN_CONDITIONAL_TRUE = @BUILD_FORTRAN_CONDITIONAL_TRUE@
BUILD_HDF5_HL_CONDITIONAL_FALSE = @BUILD_HDF5_HL_CONDITIONAL_FALSE@
BUILD_HDF5_HL_CONDITIONAL_TRUE = @BUILD_HDF5_HL_CONDITIONAL_TRUE@
BUILD_PABLO_CONDITIONAL_FALSE = @BUILD_PABLO_CONDITIONAL_FALSE@
BUILD_PABLO_CONDITIONAL_TRUE = @BUILD_PABLO_CONDITIONAL_TRUE@
BUILD_PARALLEL_CONDITIONAL_FALSE = @BUILD_PARALLEL_CONDITIONAL_FALSE@
BUILD_PARALLEL_CONDITIONAL_TRUE = @BUILD_PARALLEL_CONDITIONAL_TRUE@
BUILD_PDB2HDF = @BUILD_PDB2HDF@
BUILD_PDB2HDF_CONDITIONAL_FALSE = @BUILD_PDB2HDF_CONDITIONAL_FALSE@
BUILD_PDB2HDF_CONDITIONAL_TRUE = @BUILD_PDB2HDF_CONDITIONAL_TRUE@
BYTESEX = @BYTESEX@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_VERSION = @CC_VERSION@

# H5_CFLAGS holds flags that should be used as CFLAGS when building hdf5,
# but which shouldn't be exported to h5cc for building other programs.
CFLAGS = @CFLAGS@ @H5_CFLAGS@
CONFIG_DATE = @CONFIG_DATE@
CONFIG_MODE = @CONFIG_MODE@
CONFIG_USER = @CONFIG_USER@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@ @H5_CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@ @H5_CXXFLAGS@
CXX_SHARED_CONDITIONAL_FALSE = @CXX_SHARED_CONDITIONAL_FALSE@
CXX_SHARED_CONDITIONAL_TRUE = @CXX_SHARED_CONDITIONAL_TRUE@
CYGPATH_W = @CYGPATH_W@
DEBUG_PKG = @DEBUG_PKG@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_DIRS = @DYNAMIC_DIRS@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
F77 = @F77@

# Make sure that these variables are exported to the Makefiles
F9XMODEXT = @F9XMODEXT@
F9XMODFLAG = @F9XMODFLAG@
F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
FC = @FC@
FCFLAGS = @FCFLAGS@
FCLIBS = @FCLIBS@
FFLAGS = @FFLAGS@ @H5_FFLAGS@
FILTERS = @FILTERS@
FORTRAN_SHARED_CONDITIONAL_FALSE = @FORTRAN_SHARED_CONDITIONAL_FALSE@
FORTRAN_SHARED_CONDITIONAL_TRUE = @FORTRAN_SHARED_CONDITIONAL_TRUE@
FSEARCH_DIRS = @FSEARCH_DIRS@
H5_CFLAGS = @H5_CFLAGS@
H5_CPPFLAGS = @H5_CPPFLAGS@
H5_CXXFLAGS = @H5_CXXFLAGS@
H5_FFLAGS = @H5_FFLAGS@
H5_VERSION = @H5_VERSION@
HADDR_T = @HADDR_T@
HDF5_INTERFACES = @HDF5_INTERFACES@
HID_T = @HID_T@
HL = @HL@
HL_FOR = @HL_FOR@
HSIZET = @HSIZET@
HSIZE_T = @HSIZE_T@
HSSIZE_T = @HSSIZE_T@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_STATIC_EXEC = @LT_STATIC_EXEC@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
MPE = @MPE@
OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PARALLEL = @PARALLEL@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PTHREAD = @PTHREAD@
RANLIB = @RANLIB@
ROOT = @ROOT@
RUNPARALLEL = @RUNPARALLEL@
RUNSERIAL = @RUNSERIAL@
R_INTEGER = @R_INTEGER@
R_LARGE = @R_LARGE@
SEARCH = @SEARCH@
SETX = @SETX@
SET_MAKE = @SET_MAKE@

# Hardcode SHELL to be /bin/sh.  Most machines have this shell, and
# on at least one machine configure fails to detect its existence (janus).
# Also, when HDF5 is configured on one machine but run on another,
# configure's automatic SHELL detection may not work on the build machine.
SHELL = /bin/sh
SIZE_T = @SIZE_T@
STATIC_SHARED = @STATIC_SHARED@
STRIP = @STRIP@
TESTPARALLEL = @TESTPARALLEL@
TRACE_API = @TRACE_API@
USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@
USE_FILTER_NBIT = @USE_FILTER_NBIT@
USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@
USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@
USE_FILTER_SZIP = @USE_FILTER_SZIP@
VERSION = @VERSION@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
ac_ct_FC = @ac_ct_FC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@

# Install directories that automake doesn't know about
includedir = $(exec_prefix)/include
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@

# Shell commands used in Makefiles
RM = rm -f
CP = cp
TIME = time

# Some machines need a command to run executables; this is that command
# so that our tests will run.
# We use RUNTESTS instead of RUNSERIAL directly because it may be that
# some tests need to be run with a different command.  Older versions
# of the makefiles used the command
# $(LIBTOOL) --mode=execute
# in some directories, for instance.
RUNTESTS = $(RUNSERIAL)

# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
docdir = $(exec_prefix)/doc

# Scripts used to build examples
H5CC = $(bindir)/h5cc
H5CC_PP = $(bindir)/h5pcc
H5FC = $(bindir)/h5fc
H5FC_PP = $(bindir)/h5pfc

# .chkexe files are used to mark tests that have run successfully.
# .chklog files are output from those tests.
# *.clog are from the MPE option.

# These are the files that 'make clean' (and derivatives) will remove from this
# directory.  Since automake doesn't know about the examples, we need to
# tell it to clean the example programs, too.
CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.h5

# Use h5c++ to build examples, instead of reguar C++ compiler
H5CPP = $(bindir)/h5c++

# These are the programs that 'make all' or 'make prog' will build and
# which 'make check' will run.  List them in the order they should be run.
TEST_PROG = create readdata writedata compound extend_ds chunks h5group
EXAMPLE_PROG = $(TEST_PROG)

# Tell conclude.in when to build the examples
EXTRA_PROG = $(TEST_PROG)

# These are the example files to be installed
INSTALL_FILES = create.cpp readdata.cpp writedata.cpp compound.cpp         \
              extend_ds.cpp chunks.cpp h5group.cpp

MOSTLYCLEANFILES = $(EXTRA_PROG:=.o)
CLEANFILES = $(EXTRA_PROG)

# Tell conclude.am that these are C++ tests.
HDF_CXX = yes

# How to install examples
EXAMPLEDIR = $(docdir)/hdf5/examples/c++

# Automake needs to be taught how to build lib, progs, and tests targets.
# These will be filled in automatically for the most part (e.g.,
# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
# EXTRA_TEST variables are supplied to allow the user to force targets to
# be built at certain times. 
LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)

PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
        $(EXTRA_PROG)

TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  c++/examples/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  c++/examples/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	$(mkdir_p) $(distdir)/../../config
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile all-local
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-data-local

install-exec-am:

install-info: install-info-am

install-man:

installcheck-am: installcheck-local

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
	mostlyclean-local

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-info-am uninstall-local

.PHONY: all all-am all-local check check-TESTS check-am clean \
	clean-generic clean-libtool distclean distclean-generic \
	distclean-libtool distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am \
	install-data-local install-exec install-exec-am install-info \
	install-info-am install-man install-strip installcheck \
	installcheck-am installcheck-local installdirs \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
	pdf-am ps ps-am uninstall uninstall-am uninstall-info-am \
	uninstall-local


# check-install is a synonym for installcheck.
# Add this build rule here (rather than in conclude.am, where build rules
# normally go) because it should be included in the top-level Makefile.am
# as well.
check-install: installcheck

# Some of the examples depend on files created by running other examples
readdata.chkexe_: create.chkexe_
chunks.chkexe_: extend_ds.chkexe_

$(EXAMPLEDIR):
	-$(top_srcdir)/bin/mkdirs $@

install-data-local:
	@$(MAKE) install-examples
uninstall-local:
	@$(MAKE) uninstall-examples

# Some C++ compilers/linkers will create a directory named ii_files,
# which should be cleaned.
mostlyclean-local:
	if test -d ii_files; then                                       \
	  $(RM) -rf ii_files;                                           \
	fi

# Install source files, which are the examples with .cpp suffixes.  Do the same
# for uninstall.
install-examples: $(EXAMPLEDIR)
	@for f in X $(INSTALL_FILES); do                                      \
	  if test $$f != X; then                                              \
	    (set -x; $(INSTALL_DATA) $(top_srcdir)/c++/examples/$$f $(EXAMPLEDIR)/. || exit 1);\
	  fi;                                                                 \
	done

uninstall-examples:
	@if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then              \
	  set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES).cpp;             \
	fi

check-install:
	@$(MAKE) $(AM_MAKEFLAGS) installcheck
installcheck-local:
	@$(MAKE) $(AM_MAKEFLAGS) check

# How to build programs using h5c++
$(EXTRA_PROG): $(H5CPP) $(LIBHDF5) $(LIBH5CPP)
	$(H5CPP) $(CPPFLAGS) -o $@ $(srcdir)/$@.cpp

# List dependencies for each program.  Normally, automake would take
# care of this for us, but if we tell automake about the programs it
# will try to build them with the normal C++ compiler, not h5c++.  This is
# an inelegant way of solving the problem, unfortunately.
create: $(srcdir)/create.cpp
readdata: $(srcdir)/readdata.cpp
writedata: $(srcdir)/writedata.cpp
compound: $(srcdir)/compound.cpp
extend_ds: $(srcdir)/extend_ds.cpp
chunks: $(srcdir)/chunks.cpp
h5group: $(srcdir)/h5group.cpp

# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
# BUILT_SOURCES contain targets that need to be built before anything else
# in the directory (e.g., Fortran type detection)
build-lib: $(BUILT_SOURCES) $(LIB)
build-progs: $(BUILT_SOURCES) $(LIB) $(PROGS)
build-tests: $(BUILT_SOURCES) $(LIB) $(PROGS) $(TESTS)

lib progs tests check-s check-p check-clean ::
	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
	@for d in X $(SUBDIRS); do                                             \
	    if test $$d != X && test $$d != .; then                           \
	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
	    fi;                                                               \
	done

# Tell Automake to build tests when the user types `make all' (this is
# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
# Automake won't build them automatically, either.
all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)

# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
# UPDATE: docs no longer reside in this build tree, so this target
# is depreciated.
install-doc uninstall-doc:
	@echo "Nothing to be done."

# clean up files generated by tests so they can be re-run.
build-check-clean:
	$(RM) $(CHECK_CLEANFILES)

# run check-clean whenever mostlyclean is run
mostlyclean-local: build-check-clean

# Run each test in order, passing $(TEST_FLAGS) to the program.
# Since tests are done in a shell loop, "make -i" does apply inside it.
# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
# The timestamps give a rough idea how much time the tests use.
#
# Note that targets in TESTS (defined above) will be built when the user
# types 'make tests' or 'make check', but only programs in TEST_PROG,
# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
check-TESTS: test

test _test:
	@$(MAKE) build-check-s
	@$(MAKE) build-check-p

# Actual execution of check-s.
build-check-s: $(LIB) $(PROGS) $(TESTS)
	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
	fi
	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
	fi

_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)

# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
# $${log} is the log file.
# $${tname} is the name of test.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
	   tname=$(@:.chkexe_=)$(EXEEXT);\
	   log=$(@:.chkexe_=.chklog); \
	   echo "============================"; \
	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
	      echo "No need to test $${tname} again."; \
	   else \
	      echo "============================" > $${log}; \
	      if test "X$(HDF_FORTRAN)" = "Xyes"; then \
	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
	      elif test "X$(HDF_CXX)" = "Xyes"; then \
	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
	      else \
	         echo "Testing $${tname} $(TEST_FLAGS)"; \
	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
	      fi; \
	      echo "============================" >> $${log}; \
	      srcdir="$(srcdir)" \
	         $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
	         && touch $(@:.chkexe_=.chkexe) || \
	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
	         (cat $${log} && false) || exit 1; \
	      echo "" >> $${log}; \
	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
	      echo "============================" >> $${log}; \
	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
	      cat $${log}; \
	   fi; \
	   echo "============================"; \
	fi

# The dummysh.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
# $${log} is the log file.
# $${tname} is the name of test.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
	   cmd=$(@:.chkexe_=);\
	   tname=`basename $$cmd`;\
	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
	   log=`basename $(@:.chkexe_=.chklog)`; \
	   echo "============================"; \
	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
	      echo "No need to test $${tname} again."; \
	   else \
	      echo "============================" > $${log}; \
	      if test "X$(HDF_FORTRAN)" = "Xyes"; then \
	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
	      elif test "X$(HDF_CXX)" = "Xyes"; then \
	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
	      else \
	         echo "Testing $${tname} $(TEST_FLAGS)"; \
	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
	      fi; \
	      echo "============================" >> $${log}; \
	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
	      srcdir="$(srcdir)" \
	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
	         && touch $${chkname} || \
	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
	         (cat $${log} && false) || exit 1; \
	      echo "" >> $${log}; \
	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
	      echo "============================" >> $${log}; \
	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
	      cat $${log}; \
	   fi; \
	   echo "============================"; \
	fi

# Actual execution of check-p.
build-check-p: $(LIB) $(PROGS) $(TESTS)
	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
	fi
	@if test -n "$(TEST_PROG_PARA)"; then                                \
	    echo "**** Hint ****";                                            \
	    echo "Parallel test files reside in the current directory"        \
	         "by default.";                                               \
	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
	    echo "    export HDF5_PARAPREFIX";                                \
	    echo "    make check";                                            \
	    echo "**** end of Hint ****";                                     \
	fi
	@for test in $(TEST_PROG_PARA) dummy; do                             \
	   if test $$test != dummy; then                                      \
	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
	      RUNTESTS="$(RUNPARALLEL)"; \
	   fi;                                                                \
	done
	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
	  if test $$test != dummy; then                                      \
	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
	  fi;                                                                 \
	done
	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
	fi

# Run test with different Virtual File Driver
check-vfd:
	@for vfd in $(VFD_LIST) dummy; do                                     \
	    if test $$vfd != dummy; then                                      \
	        echo "============================";                          \
	        echo "Testing Virtual File Driver $$vfd";                     \
	        echo "============================";                          \
	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check;              \
	    fi;                                                               \
	done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: