path: root/configure.in

dnl Process this file with autoconf to produce configure.
dnl
dnl Copyright by the Board of Trustees of the University of Illinois.
dnl All rights reserved.
dnl
dnl This file is part of HDF5.  The full HDF5 copyright notice, including
dnl terms governing use, modification, and redistribution, is contained in
dnl the files COPYING and Copyright.html.  COPYING can be found at the root
dnl of the source code distribution tree; Copyright.html can be found at the
dnl root level of an installed copy of the electronic HDF5 document set and
dnl is linked from the top-level documents page.  It can also be found at
dnl http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have
dnl access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.

dnl ----------------------------------------------------------------------
dnl Initialize configure.
dnl
AC_REVISION($Id$)
AC_PREREQ([2.53])

dnl AC_INIT takes the name of the package, the version number, and an
dnl email address to report bugs. AC_CONFIG_SRCDIR takes a unique file
dnl as its argument.
dnl
dnl NOTE: Don't forget to change the version number here when we do a
dnl release!!!
dnl
AC_INIT([HDF5], [1.7.24], [hdfhelp@ncsa.uiuc.edu])
AC_CONFIG_SRCDIR([src/H5.c])
AC_CONFIG_HEADER([src/H5config.h])

AC_CONFIG_AUX_DIR([bin])

AC_OUTPUT_COMMANDS([
  echo "creating src/H5pubconf.h"
  sed 's/#define /#define H5_/' <src/H5config.h |\
    sed 's/#undef /#undef H5_/' >pubconf
  if test ! -f src/H5pubconf.h; then
    /bin/mv -f pubconf src/H5pubconf.h
  elif (diff pubconf src/H5pubconf.h >/dev/null); then
    /bin/rm -f pubconf
    echo "src/H5pubconf.h is unchanged"
  else
    /bin/mv -f pubconf src/H5pubconf.h
  fi
])

AC_CANONICAL_HOST
AC_SUBST([CPPFLAGS])

dnl Different compilers may need default libraries. They are specified in
dnl the config/* files, so we put this statement here so that it'll be
dnl set by the code which follows...
dnl
AC_SUBST(DEFAULT_LIBS) DEFAULT_LIBS=""

dnl ----------------------------------------------------------------------
dnl Set prefix default (install directory) to a directory in the build area.
dnl This allows multiple src-dir builds within one host.
AC_PREFIX_DEFAULT([`pwd`/hdf5])

dnl ----------------------------------------------------------------------
dnl Dump all shell variables values.
dnl
AC_MSG_CHECKING([shell variables initial values])
set >&AS_MESSAGE_LOG_FD
AC_MSG_RESULT([done])

dnl ----------------------------------------------------------------------
dnl Some platforms have broken tr, basename, and/or xargs programs. Check
dnl that it actually does what it's supposed to do. Catch this early
dnl since configure relies upon tr heavily and there's no use continuing
dnl if it's broken.
dnl
AC_MSG_CHECKING([if tr works])
TR_TEST="`echo Test | tr 'a-z,' 'A-Z '`"
if test $TR_TEST != "TEST"; then
  AC_MSG_ERROR([tr program doesn't work])
else
  AC_MSG_RESULT([yes])
fi

AC_MSG_CHECKING([if basename works])
BASENAME_TEST="`basename /foo/bar/baz/qux/basename_works`"
if test $BASENAME_TEST != "basename_works"; then
  AC_MSG_ERROR([basename program doesn't work])
else
  AC_MSG_RESULT([yes])
fi

AC_MSG_CHECKING([if xargs works])
XARGS_TEST="`echo /foo/bar/baz/qux/xargs_works | xargs basename`"
if test $XARGS_TEST != "xargs_works"; then
  AC_MSG_ERROR([xargs program doesn't work])
else
  AC_MSG_RESULT([yes])
fi

dnl ----------------------------------------------------------------------
dnl Check that the cache file was build on the same host as what we're
dnl running on now.
dnl
AC_CACHE_CHECK([for cached host], [hdf5_cv_host], [hdf5_cv_host="none"]);
if test $hdf5_cv_host = "none"; then
  hdf5_cv_host=$host
elif test $hdf5_cv_host != $host; then
  echo "The config.cache file was generated on $hdf5_cv_host but"
  echo "this is $host.  Please remove that file and try again."
  AC_MSG_ERROR(config.cache file is invalid)
fi

dnl ----------------------------------------------------------------------
dnl Source any special files that we need.  These files normally aren't
dnl present but can be used by the maintainers to fine tune things like
dnl turning on debug or profiling flags for the compiler.  The search order
dnl is:
dnl
dnl	CPU-VENDOR-OS
dnl	VENDOR-OS
dnl	CPU-OS
dnl	CPU-VENDOR
dnl	OS
dnl	VENDOR
dnl	CPU
dnl
dnl If the `OS' ends with a version number then remove it. For instance,
dnl `freebsd3.1' would become `freebsd'
case $host_os in
  aix4.*)
    host_os_novers=aix4.x
    ;;
  aix5.*)
    host_os_novers=aix5.x
    ;;
  freebsd*)
    host_os_novers=freebsd
    ;;
  irix5.*)
    host_os_novers=irix5.x
    ;;
  irix6.*)
    host_os_novers=irix6.x
    ;;
  osf4.*)
    host_os_novers=osf4.x
    ;;
  osf5.*)
    host_os_novers=osf5.x
    ;;
  solaris2.*)
    host_os_novers=solaris2.x
    ;;
  *)
    host_os_novers=$host_os
    ;;
esac

AC_ARG_ENABLE([hsizet],
              [AC_HELP_STRING([--disable-hsizet],
                              [Datasets can normally be larger than
                               memory and/or files but some compilers are
                               unable to handle this (including versions
                               of GCC before 2.8.0). Disabling the
                               feature causes dataset sizes to be
                               restricted to the size of core memory, or
                               'size_t'.])],
              [HSIZET=$enableval])

AC_MSG_CHECKING([for sizeof hsize_t and hssize_t])

AC_SUBST(HSIZET)
case $HSIZET in
  no|small)
    AC_MSG_RESULT([small])
    HSIZET=small
    ;;
  *)
    AC_MSG_RESULT([large])
    HSIZET=large
    AC_DEFINE([HAVE_LARGE_HSIZET], [1],
              [Define if it's safe to use \`long long' for hsize_t and hssize_t])
    ;;
esac

host_config="none"
for f in $host_cpu-$host_vendor-$host_os \
         $host_cpu-$host_vendor-$host_os_novers \
         $host_vendor-$host_os \
         $host_vendor-$host_os_novers \
         $host_cpu-$host_os \
         $host_cpu-$host_os_novers \
         $host_cpu-$host_vendor \
         $host_os \
         $host_os_novers \
         $host_vendor \
         $host_cpu ; do
  AC_MSG_CHECKING([for config $f])
  if test -f "$srcdir/config/$f"; then
    host_config=$srcdir/config/$f
    AC_MSG_RESULT([found])
    break
  fi
  AC_MSG_RESULT([no])
done
if test "X$host_config" != "Xnone"; then
  CC_BASENAME="`echo $CC | cut -f1 -d' ' | xargs basename 2>/dev/null`"
  . $host_config
fi

dnl Source any special site-specific file
hname="`hostname`"
while test -n "$hname"; do
  file=$srcdir/config/site-specific/host-$hname
  AC_MSG_CHECKING([for config $file])
  if test -f "$file"; then
    . $file
    AC_MSG_RESULT([found])
    break
  fi
  AC_MSG_RESULT([no])
  hname_tmp=$hname
  hname="`echo $hname | cut -d. -f2-99`"
  test "$hname_tmp" = "$hname" && break
done

dnl ----------------------------------------------------------------------
dnl Check for programs.
dnl
AC_PROG_CC
CC_BASENAME="`echo $CC | cut -f1 -d' ' | xargs basename 2>/dev/null`"
AC_PROG_MAKE_SET
AC_PROG_INSTALL
AC_LIBTOOL_DLOPEN
AC_PROG_LIBTOOL

dnl ----------------------------------------------------------------------
dnl Check if they would like the Fortran interface compiled
dnl
AC_SUBST([HDF5_INTERFACES]) HDF5_INTERFACES=""
AC_MSG_CHECKING([if Fortran interface enabled])
AC_ARG_ENABLE([fortran],
              [AC_HELP_STRING([--enable-fortran],
                              [Compile the Fortran interface [default=no]])],
              [HDF_FORTRAN=$enableval])

if test "X$HDF_FORTRAN" = "Xyes"; then
  echo "yes"

  HDF5_INTERFACES="$HDF5_INTERFACES fortran"

  dnl --------------------------------------------------------------------
  dnl HDF5 integer variables for the H5fortran_types.f90 file.
  dnl
  AC_SUBST([R_LARGE])
  AC_SUBST([R_INTEGER])
  AC_SUBST([HSIZE_T])
  AC_SUBST([HSSIZE_T])
  AC_SUBST([HID_T])
  AC_SUBST([SIZE_T])
  AC_SUBST([OBJECT_NAMELEN_DEFAULT_F])

  dnl --------------------------------------------------------------------
  dnl General Fortran flags
  dnl
  AC_SUBST([FFLAGS])
  AC_SUBST([F9XSUFFIXFLAG])
  AC_SUBST([FSEARCH_DIRS])

  dnl --------------------------------------------------------------------
  dnl Check for a Fortran 9X compiler and how to include modules.
  dnl 
  AC_PROG_F9X
  AC_F9X_MODS

  dnl Change to the Fortran 90 language
  AC_LANG_FORTRAN9X

  dnl --------------------------------------------------------------------
  dnl See if the compiler will support the "-I." option
  dnl
  FFLAGS_saved=$FFLAGS
  FFLAGS="$FFLAGS -I."

  AC_MSG_CHECKING(if compiler supports -I. option)
  AC_TRY_FCOMPILE([
      program conftest
      end
  ], AC_MSG_RESULT(yes),
     AC_MSG_RESULT(no)
     FFLAGS="$FFLAGS_saved")

  dnl Change to the C language
  AC_LANG_C
else
  echo "no"
fi

dnl ----------------------------------------------------------------------
dnl Check if they would like the C++ interface compiled
dnl
AC_MSG_CHECKING([if c++ interface enabled])
AC_ARG_ENABLE([cxx],
              [AC_HELP_STRING([--enable-cxx],
                              [Compile the C++ interface [default=no]])],
              [HDF_CXX=$enableval])

if test "X$HDF_CXX" = "Xyes"; then
  echo "yes"
  HDF5_INTERFACES="$HDF5_INTERFACES c++"
  AC_PROG_CXX
  AC_PROG_CXXCPP	dnl this is checked for when AC_HEADER_STDC is done

  dnl Change to the C++ language
  AC_LANG_CPLUSPLUS

  AC_MSG_CHECKING([if $CXX needs old style header files in includes])
  AC_TRY_RUN([
#include <iostream>

int main(void) { return 0; }
  ], [
    echo no
  ], [
    echo yes
    CXXFLAGS="${CXXFLAGS} -DOLD_HEADER_FILENAME"
  ])

  AC_MSG_CHECKING([if $CXX can handle namespaces])
  AC_TRY_RUN([
namespace H5 {
int fnord;
}

int main(void) {
   using namespace H5;
   fnord = 37;
   return 0;
} 
  ], [
     echo yes
  ], [
     echo no
     CXXFLAGS="${CXXFLAGS} -DH5_NO_NAMESPACE"
  ])

  AC_MSG_CHECKING([if $CXX supports std])
  AC_TRY_RUN([
#include <string>

using namespace std;

int main(void) {
   string myString("testing namespace std");
   return 0;
}
  ], [
     echo yes
  ], [
     echo no
     CXXFLAGS="${CXXFLAGS} -DH5_NO_STD"
  ])

  AC_MSG_CHECKING([if $CXX supports bool types])
  AC_TRY_RUN([
int main(void) {
   bool flag;
   return 0;
}
  ], [
     echo yes
  ], [
     echo no
     CXXFLAGS="${CXXFLAGS} -DBOOL_NOTDEFINED"
  ])

  AC_MSG_CHECKING([if $CXX can handle static cast])
  AC_TRY_RUN([
int main(void) {
   float test_float;
   int test_int;
   test_float = 37.0;
   test_int = static_cast <int> (test_float);
   return 0;
}
  ], [
    echo yes
  ], [
    echo no
    CXXFLAGS="${CXXFLAGS} -DNO_STATIC_CAST"
  ])

  dnl Change to the C language
  AC_LANG_C
else
  echo "no"
fi

dnl ----------------------------------------------------------------------
dnl If we should build only static executables
dnl
AC_MSG_CHECKING([if should build only statically linked executables])
AC_ARG_ENABLE([static_exec],
              [AC_HELP_STRING([--enable-static-exec],
                              [Build only statically linked executables
                               [default=no]])],
              [STATIC_EXEC=$enableval])

if test "X$STATIC_EXEC" = "Xyes"; then
  echo "yes"
  LT_STATIC_EXEC="-all-static"
else
  echo "no"
  LT_STATIC_EXEC=""
fi
AC_SUBST([LT_STATIC_EXEC])

dnl ----------------------------------------------------------------------
dnl Check if they have Perl installed on their system. We only need Perl
dnl if they're using a GNU compiler.
dnl
AC_SUBST([PERL]) PERL=""
if test "X$GCC" = "Xyes"; then
  AC_CHECK_PROGS([PERL], [perl],, [$PATH])
fi

dnl ----------------------------------------------------------------------
dnl Check which archiving tool to use. This needs to be done before
dnl the AC_PROG_LIBTOOL macro.
dnl
if test -z "$AR"; then
  AC_CHECK_PROGS([AR], [ar xar], [:], [$PATH])
fi
AC_SUBST([AR])

dnl Export the AR macro so that it will be placed in the libtool file
dnl correctly.
export AR

dnl Post processing to patch up some deficiencies in libtool
case $host_os in
  linux*)
    # If gcc is not used, need to set $wl to use "-Wl,"
    if $CC -v 2>&1 | grep '^gcc' > /dev/null ; then
      : using gcc
    else
      echo 'fixing $wl in' $ofile
ed - $ofile <<EOF 2> /dev/null
/^wl=""/s//wl="-Wl,"/
w
q
EOF
    fi
    ;;
esac

dnl Fix up the INSTALL macro if it's a relative path. We want the
dnl full-path to the binary instead.
case "$INSTALL" in
  *install-sh*)
    INSTALL='\${top_srcdir}/bin/install-sh -c'
    ;;
esac

AC_MSG_CHECKING([make])
AC_SUBST_FILE([DEPEND])

if test "`${MAKE-make} --version -f /dev/null 2>/dev/null |\
          sed -n 1p|cut -c1-8`" = "GNU Make"; then
  AC_MSG_RESULT([GNU make])
  GMAKE=yes
  if test "X$GCC" = "Xyes"; then
    DEPEND=config/depend1
  else
    DEPEND=config/depend2
  fi
else
  AC_MSG_RESULT([generic])
fi

dnl How do we include another file into a Makefile?
if test -z "$DEPEND"; then
  AC_MSG_CHECKING([how to include a makefile])

  dnl The include file contains the target for `foo'
  cat >makeinc <<EOF
foo:
	@:
EOF

  while true; do #for break
    dnl pmake. We have to be careful because some pmake think that the
    dnl contents of the MAKE environment variable is a target.
    echo '.include <makeinc>' >maketest
    if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
      AC_MSG_RESULT([.include <FILE>])
      DEPEND=config/depend3
      break
    fi

    dnl Most make's use `include FILE'
    echo 'include makeinc' >maketest
    if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
      AC_MSG_RESULT([include FILE])
      DEPEND=config/depend4
      break;
    fi

    dnl default
    AC_MSG_RESULT([you have a deficient make command])
    DEPEND=config/dependN
    break
  done

  rm makeinc maketest
fi

dnl ----------------------------------------------------------------------
dnl Sometimes makes think the `.PATH:' appearing before the first rule
dnl with an action should override the `all' default target. So we have
dnl to decide what the proper syntax is.
dnl
AC_MSG_CHECKING([how make searches directories])
while true; do #for break
  # The most common method is `VPATH=DIR1 DIR2 ...'
  cat >maketest <<EOF
VPATH=$srcdir/config $srcdir/src $srcdir/bin
.c.o:
	cp $< H5.o

foo: H5.o
	/bin/rm -f H5.o
	@echo works
EOF

  if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
    SEARCH_RULE='VPATH='
    SEARCH_SEP=' '
    AC_MSG_RESULT([VPATH=DIR1 DIR2 ...])
    break
  fi

  dnl The second most common method is like above except with the
  dnl directories separated by colons.
  cat >maketest <<EOF
VPATH=$srcdir/config:$srcdir/src:$srcdir/bin
.c.o:
	cp $< H5.o

foo: H5.o
	/bin/rm -f H5.o
	@echo works
EOF

  if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
    SEARCH_RULE='VPATH='
    SEARCH_SEP=':'
    AC_MSG_RESULT([VPATH=DIR1:DIR2:...])
    break
  fi

  dnl pmake uses the construct `.PATH: DIR1 DIR2
  cat >maketest <<EOF
.PATH: $srcdir/config $srcdir/src $srcdir/bin
.c.o:
	cp $< H5.o

foo: H5.o
	/bin/rm -f H5.o
	@echo works
EOF

  if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then
    SEARCH_RULE='.PATH: '
    SEARCH_SEP=' '
    AC_MSG_RESULT([.PATH: DIR1 DIR2 ...])
    break
  fi

  dnl No way for make to search directories
  SEARCH_RULE='## SEARCH DISABLED: '
  SEARCH_SEP=' '
  AC_MSG_RESULT([it doesn't])
  if test ! -f configure; then
    AC_MSG_ERROR([${MAKE-make} requires the build and source directories to be the same])
  fi
  break
done
rm maketest

dnl ----------------------------------------------------------------------
dnl Production flags?  Save the value in $CONFIG_MODE so we have it for
dnl the record.
dnl
AC_MSG_CHECKING(for production mode)
AC_ARG_ENABLE(production,
              [AC_HELP_STRING([--enable-production],
                              [Determines how to run the compiler.])])

case "X-$enable_production" in
  X-yes)
    enable_production="yes"
    AC_MSG_RESULT([production])

    dnl Remove the "-g" flag from CFLAGS if it's in there.
    dnl
    CFLAGS_temp=""
    if test -n "$CFLAGS"; then
      for d in $CFLAGS ; do
        if test "X$d" != "X-g"; then
          CFLAGS_temp="$CFLAGS_temp $d"
        fi
      done
      CFLAGS=$CFLAGS_temp
    fi

    CXXFLAGS_temp=""
    if test -n "$CXXFLAGS"; then
      for d in $CXXFLAGS ; do
        if test "X$d" != "X-g"; then
          CXXFLAGS_temp="$CXXFLAGS_temp $d"
        fi
      done
      CXXFLAGS=$CXXFLAGS_temp
    fi

    CONFIG_MODE=production
    CFLAGS="$CFLAGS $PROD_CFLAGS"
    CXXFLAGS="$CXXFLAGS $PROD_CXXFLAGS"
    CPPFLAGS="$CPPFLAGS $PROD_CPPFLAGS"
    ;;
  X-|X-no)
    enable_production="no"
    AC_MSG_RESULT([development])
    CONFIG_MODE=development
    CFLAGS="$CFLAGS $DEBUG_CFLAGS"
    CXXFLAGS="$CXXFLAGS $DEBUG_CXXFLAGS"
    CPPFLAGS="$CPPFLAGS $DEBUG_CPPFLAGS"
    ;;
  X-pg|X-profile)
    enable_production="profile"
    AC_MSG_RESULT([profile])
    CONFIG_MODE=profile
    CFLAGS="$CFLAGS $PROFILE_CFLAGS"
    CXXFLAGS="$CXXFLAGS $PROFILE_CXXFLAGS"
    CPPFLAGS="$CPPFLAGS $PROFILE_CPPFLAGS"
    ;;
  *)
    enable_production="user-defined"
    AC_MSG_RESULT([user-defined])
    CONFIG_MODE="$X-enableval"
    ;;
esac

dnl ----------------------------------------------------------------------
dnl Check for system libraries.
dnl
AC_CHECK_LIB([m], [ceil])

if test "`uname`" = "SunOS" -o "`uname -sr`" = "HP-UX B.11.00"; then
  dnl ...for Solaris
  AC_CHECK_LIB([nsl], [xdr_int])
fi

dnl AC_CHECK_LIB([coug], [main])		dnl ...for ASCI/Red

dnl ----------------------------------------------------------------------
dnl Check for system header files.
dnl
AC_HEADER_STDC
AC_HEADER_TIME

dnl ----------------------------------------------------------------------
dnl Check for these two functions before <sys/time.h> is checked for, otherwise
dnl they are not detected correctly on Solaris [2.6].
dnl
AC_CHECK_FUNCS(difftime gettimeofday)

dnl Unix
AC_CHECK_HEADERS([sys/resource.h sys/time.h unistd.h sys/ioctl.h sys/stat.h])
AC_CHECK_HEADERS([sys/socket.h sys/types.h])
AC_CHECK_HEADERS([stddef.h setjmp.h features.h])
AC_CHECK_HEADERS([stdint.h], [C9x=yes])

dnl Windows
AC_CHECK_HEADERS([io.h winsock.h sys/timeb.h])

case "$host" in
  alpha*-dec*-osf*)
    dnl The <sys/sysinfo.h> and <sys/proc.h> are needed on the DEC
    dnl Alpha to turn off UAC fixing. We do *not* attempt to
    dnl locate these files on other systems because there are too
    dnl many problems with including them.
    AC_CHECK_HEADERS([sys/sysinfo.h sys/proc.h])
    ;;
  mips*-sgi*-irix*)
    dnl The <sys/fpu.h> is needed on the SGI machines to turn off
    dnl denormalized floating-point values going to zero.  We do *not*
    dnl attempt to dnl locate these files on other systems because there
    dnl may be problems with including them.
    AC_CHECK_HEADERS([sys/fpu.h])
    AC_CHECK_FUNCS([get_fpc_csr])
    ;;
esac

dnl ----------------------------------------------------------------------
dnl Test for 64bit stuff before the data types and their sizes. The
dnl result could effect the outcome of the sizeof macros below.
dnl
case "$host_cpu-$host_vendor-$host_os" in
  *linux*)
    dnl ----------------------------------------------------------------------
    dnl Enable large file support on linux? Store the result in the LINUX_LFS
    dnl variable for posterity
    AC_ARG_ENABLE([linux-lfs],
                  [AC_HELP_STRING([--enable-linux-lfs],
                                  [Enable support for large (64-bit)
                                   files on Linux. [default=check]])])

    LINUX_LFS="no"
    case "X-$enable_linux_lfs" in
      X-yes)
        LINUX_LFS=yes
        ;;
      X-no)
        ;;
      X-|*)
        MAJOR_VER="`uname -r | cut -d '.' -f1`"
        MINOR_VER="`uname -r | cut -d '.' -f2`"

        if test ${MAJOR_VER} -gt 2 -o ${MAJOR_VER} -eq 2 -a ${MINOR_VER} -ge 4; then
          LINUX_LFS="yes"
        fi
        ;;
    esac

    AC_MSG_CHECKING([for large file support mode on Linux])
    if test "X$LINUX_LFS" = "Xyes"; then
      AC_MSG_RESULT([enabled])
      CPPFLAGS="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE $CPPFLAGS"
    else
      AC_MSG_RESULT([disabled])
    fi

    dnl Add POSIX support on Linux systems, so <features.h> defines
    dnl __USE_POSIX, which is required to get the prototype for fdopen
    dnl defined correctly in <stdio.h>
    CPPFLAGS="-D_POSIX_SOURCE $CPPFLAGS"

    dnl Also add BSD support on Linux systems, so <features.h> defines
    dnl __USE_BSD, which is required to get the prototype for strdup
    dnl defined correctly in <string.h> and snprintf & vsnprintf defined
    dnl correctly in <stdio.h>
    CPPFLAGS="-D_BSD_SOURCE $CPPFLAGS"
    ;;
esac

AC_TRY_COMPILE([#include <sys/types.h>],
               [off64_t n = 0;],
               [AC_CHECK_FUNCS([lseek64 fseek64])],
               [AC_MSG_RESULT([skipping test for lseek64() and fseek64()])])

dnl ----------------------------------------------------------------------
dnl Data types and their sizes.
dnl
AC_TYPE_OFF_T
AC_CHECK_TYPE([size_t], [unsigned long])
AC_CHECK_TYPE([ssize_t], [long])
AC_C_BIGENDIAN
AC_CHECK_SIZEOF([char], [1])
AC_CHECK_SIZEOF([short], [2])
AC_CHECK_SIZEOF([int], [4])
AC_CHECK_SIZEOF([long], [4])
AC_CHECK_SIZEOF([long long], [8])
AC_CHECK_SIZEOF([__int64], [8])
AC_CHECK_SIZEOF([float], [4])
AC_CHECK_SIZEOF([double], [8])
AC_CHECK_SIZEOF([long double], [8])

dnl Checkpoint the cache
AC_CACHE_SAVE

dnl Posix.1g types (C9x)
cat >>confdefs.h <<\EOF
#include <sys/types.h>
EOF

if test "X$C9x" = "Xyes"; then
  cat >>confdefs.h <<\EOF
#include <stdint.h>
EOF
fi

AC_CHECK_SIZEOF(        int8_t, [1])
AC_CHECK_SIZEOF(       uint8_t, [1])
AC_CHECK_SIZEOF(  int_least8_t, [1])
AC_CHECK_SIZEOF( uint_least8_t, [1])
AC_CHECK_SIZEOF(   int_fast8_t, [1])
AC_CHECK_SIZEOF(  uint_fast8_t, [1])

AC_CHECK_SIZEOF(       int16_t, [2])
AC_CHECK_SIZEOF(      uint16_t, [2])
AC_CHECK_SIZEOF( int_least16_t, [2])
AC_CHECK_SIZEOF(uint_least16_t, [2])
AC_CHECK_SIZEOF(  int_fast16_t, [2])
AC_CHECK_SIZEOF( uint_fast16_t, [2])

AC_CHECK_SIZEOF(       int32_t, [4])
AC_CHECK_SIZEOF(      uint32_t, [4])
AC_CHECK_SIZEOF( int_least32_t, [4])
AC_CHECK_SIZEOF(uint_least32_t, [4])
AC_CHECK_SIZEOF(  int_fast32_t, [4])
AC_CHECK_SIZEOF( uint_fast32_t, [4])

AC_CHECK_SIZEOF(       int64_t, [8])
AC_CHECK_SIZEOF(      uint64_t, [8])
AC_CHECK_SIZEOF( int_least64_t, [8])
AC_CHECK_SIZEOF(uint_least64_t, [8])
AC_CHECK_SIZEOF(  int_fast64_t, [8])
AC_CHECK_SIZEOF( uint_fast64_t, [8])

AC_CHECK_SIZEOF([size_t], [4])
AC_CHECK_SIZEOF([ssize_t], [4])

cat >>confdefs.h <<\EOF
#include <sys/types.h> /*for off_t definition*/
EOF
AC_CHECK_SIZEOF([off_t], [4])

dnl Checkpoint the cache
AC_CACHE_SAVE

dnl ----------------------------------------------------------------------
dnl Check if the dev_t type is a scalar type (must come after the check for
dnl sys/types.h)
AC_MSG_CHECKING([if dev_t is scalar])
AC_TRY_COMPILE([
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
  ],
  [dev_t d1, d2; if(d1==d2) return 0;],
  AC_DEFINE([DEV_T_IS_SCALAR], [1],
            [Define if \`dev_t' is a scalar])
  AC_MSG_RESULT(yes),
  AC_MSG_RESULT(no)
)

dnl ----------------------------------------------------------------------
dnl Fake --with-xxx option to allow us to create a help message for the
dnl following --with-xxx options which can take either a =DIR or =INC,LIB
dnl specifier.
dnl
AC_ARG_WITH([fnord],
  [
 For the following --with-xxx options, you can specify where the header
 files and libraries are in two different ways:

    --with-xxx=INC,LIB - Specify individually the include directory and
                         library directory separated by a comma
    --with-xxx=DIR     - Specify only the directory which contains the
                         include/ and lib/ subdirectories
  ])

dnl ----------------------------------------------------------------------
dnl Is the dmalloc present? It has a header file `dmalloc.h' and a library
dnl `-ldmalloc' and their locations might be specified with the `--with-dmalloc'
dnl command-line switch. The value is an include path and/or a library path.
dnl If the library path is specified then it must be preceded by a comma.
dnl
AC_ARG_WITH([dmalloc],
            [AC_HELP_STRING([--with-dmalloc=DIR],
                            [Use dmalloc memory debugging aid [default=no]])],,
            withval=no)

case $withval in
  yes)
    HAVE_DMALLOC="yes"
    AC_CHECK_HEADERS(dmalloc.h)
    AC_CHECK_LIB(dmalloc, dmalloc_shutdown,, unset HAVE_DMALLOC)

    if test -z "$HAVE_DMALLOC" -a -n "$HDF5_CONFIG_ABORT"; then
      AC_MSG_ERROR(couldn't find dmalloc library)
    fi
    ;;
  no)
    HAVE_DMALLOC="no"
    AC_MSG_CHECKING(for dmalloc library)
    AC_MSG_RESULT(suppressed)
    ;;
  *)
    HAVE_DMALLOC="yes"
    case "$withval" in
      *,*)
        dmalloc_inc="`echo $withval |cut -f1 -d,`"
        dmalloc_lib="`echo $withval |cut -f2 -d, -s`"
        ;;
      *)
        if test -n "$withval"; then
          dmalloc_inc="$withval/include"
          dmalloc_lib="$withval/lib"
        fi
        ;;
    esac

    dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
    dnl can mess some compilers up.
    if test "X$dmalloc_inc" = "X/usr/include"; then
      dmalloc_inc=""
    fi
    if test "X$dmalloc_lib" = "X/usr/lib"; then
      dmalloc_lib=""
    fi

    saved_CPPFLAGS="$CPPFLAGS"
    saved_LDFLAGS="$LDFLAGS"

    if test -n "$dmalloc_inc"; then
      CPPFLAGS="$CPPFLAGS -I$dmalloc_inc"
    fi

    AC_CHECK_HEADERS(dmalloc.h,, CPPFLAGS="$saved_CPPFLAGS")

    if test -n "$dmalloc_lib"; then
      LDFLAGS="$LDFLAGS -L$dmalloc_lib"
    fi

    AC_CHECK_LIB(dmalloc, dmalloc_shutdown,, LDFLAGS="$saved_LDFLAGS"; unset HAVE_DMALLOC)

    if test -z "$HAVE_DMALLOC" -a -n "$HDF5_CONFIG_ABORT"; then
      AC_MSG_ERROR(couldn't find dmalloc library)
    fi
    ;;
esac

dnl ----------------------------------------------------------------------
dnl Is the GNU zlib present? It has a header file `zlib.h' and a library
dnl `-lz' and their locations might be specified with the `--with-zlib'
dnl command-line switch. The value is an include path and/or a library path.
dnl If the library path is specified then it must be preceded by a comma.
dnl
AC_ARG_WITH([zlib],
            [AC_HELP_STRING([--with-zlib=DIR],
                            [Use zlib library for external deflate I/O
                             filter [default=yes]])],,
            withval=yes)

case $withval in
  yes)
    HAVE_ZLIB="yes"
    AC_CHECK_HEADERS([zlib.h], [HAVE_ZLIB_H="yes"])
    AC_CHECK_LIB([z], [compress2],, [unset HAVE_ZLIB])
    AC_CHECK_FUNC([compress2], [HAVE_COMPRESS2="yes"])

    if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
      AC_MSG_ERROR([couldn't find zlib library])
    fi
    ;;
  no)
    HAVE_ZLIB="no"
    AC_MSG_CHECKING([for GNU zlib])
    AC_MSG_RESULT([suppressed])
    ;;
  *)
    HAVE_ZLIB="yes"
    case "$withval" in
      *,*)
        zlib_inc="`echo $withval |cut -f1 -d,`"
        zlib_lib="`echo $withval |cut -f2 -d, -s`"
        ;;
      *)
        if test -n "$withval"; then
          zlib_inc="$withval/include"
          zlib_lib="$withval/lib"
        fi
        ;;
    esac

    dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
    dnl can mess some compilers up.
    if test "X$zlib_inc" = "X/usr/include"; then
      zlib_inc=""
    fi
    if test "X$zlib_lib" = "X/usr/lib"; then
      zlib_lib=""
    fi

    saved_CPPFLAGS="$CPPFLAGS"
    saved_LDFLAGS="$LDFLAGS"

    if test -n "$zlib_inc"; then
      CPPFLAGS="$CPPFLAGS -I$zlib_inc"
    fi

    AC_CHECK_HEADERS([zlib.h],
                     [HAVE_ZLIB_H="yes"],
                     [CPPFLAGS="$saved_CPPFLAGS"])

    if test -n "$zlib_lib"; then
      LDFLAGS="$LDFLAGS -L$zlib_lib"
    fi

    AC_CHECK_LIB([z], [compress2],,
                 [LDFLAGS="$saved_LDFLAGS"; unset HAVE_ZLIB])
    AC_CHECK_FUNC([compress2], [HAVE_COMPRESS2="yes"])

    if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
      AC_MSG_ERROR([couldn't find zlib library])
    fi
    ;;
esac

if test "x$HAVE_ZLIB" = "xyes" -a "x$HAVE_ZLIB_H" = "xyes" -a "x$HAVE_COMPRESS2" = "xyes"; then
    AC_DEFINE([HAVE_FILTER_DEFLATE], [1], [Define if support for deflate filter is enabled])

    dnl Add "deflate" to external filter list
    if test "X$EXTERNAL_FILTERS" != "X"; then
        EXTERNAL_FILTERS="${EXTERNAL_FILTERS},"
    fi
    EXTERNAL_FILTERS="${EXTERNAL_FILTERS}deflate"
fi


dnl ----------------------------------------------------------------------
dnl Is the szlib present? It has a header file `szlib.h' and a library
dnl `-lsz' and their locations might be specified with the `--with-szlib'
dnl command-line switch. The value is an include path and/or a library path.
dnl If the library path is specified then it must be preceded by a comma.
dnl
AC_ARG_WITH([szlib],
            [AC_HELP_STRING([--with-szlib=DIR],
                            [Use szlib library for external szlib I/O
                             filter [default=no]])],,
            withval=no)

case $withval in
  yes)
    HAVE_SZLIB="yes"
    AC_CHECK_HEADERS([szlib.h], [HAVE_SZLIB_H="yes"])
    AC_CHECK_LIB([sz], [SZ_BufftoBuffCompress],, [unset HAVE_SZLIB])

    if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
      AC_MSG_ERROR([couldn't find szlib library])
    fi
    ;;
  no)
    HAVE_SZLIB="no"
    AC_MSG_CHECKING([for szlib])
    AC_MSG_RESULT([suppressed])
    ;;
  *)
    HAVE_SZLIB="yes"
    case "$withval" in
      *,*)
        szlib_inc="`echo $withval |cut -f1 -d,`"
        szlib_lib="`echo $withval |cut -f2 -d, -s`"
        ;;
      *)
        if test -n "$withval"; then
          szlib_inc="$withval/include"
          szlib_lib="$withval/lib"
        fi
        ;;
    esac

    dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
    dnl can mess some compilers up.
    if test "X$szlib_inc" = "X/usr/include"; then
      szlib_inc=""
    fi
    if test "X$szlib_lib" = "X/usr/lib"; then
      szlib_lib=""
    fi

    saved_CPPFLAGS="$CPPFLAGS"
    saved_LDFLAGS="$LDFLAGS"

    if test -n "$szlib_inc"; then
      CPPFLAGS="$CPPFLAGS -I$szlib_inc"
    fi

    AC_CHECK_HEADERS([szlib.h],
                     [HAVE_SZLIB_H="yes"],
                     [CPPFLAGS="$saved_CPPFLAGS"])

    if test -n "$szlib_lib"; then
      LDFLAGS="$LDFLAGS -L$szlib_lib"
    fi

    AC_CHECK_LIB([sz], [SZ_BufftoBuffCompress],,
                 [LDFLAGS="$saved_LDFLAGS"; unset HAVE_SZLIB])

    if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then
      AC_MSG_ERROR([couldn't find szlib library])
    fi
    ;;
esac

if test "x$HAVE_SZLIB" = "xyes" -a "x$HAVE_SZLIB_H" = "xyes"; then
    AC_DEFINE(HAVE_FILTER_SZIP, 1,
            [Define if support for szip filter is enabled])

    dnl Add "szip" to external filter list
    if test "X$EXTERNAL_FILTERS" != "X"; then
        EXTERNAL_FILTERS="${EXTERNAL_FILTERS},"
    fi
    EXTERNAL_FILTERS="${EXTERNAL_FILTERS}szip"
fi

dnl ----------------------------------------------------------------------
dnl Pablo Configuration
dnl
AC_SUBST(PABLO) PABLO=""
AC_SUBST(HAVE_PABLO) HAVE_PABLO="no"
AC_ARG_WITH([pablo],
            [AC_HELP_STRING([--with-pablo=DIR],
                            [Use the Pablo library [default=no]])],,
            withval=no)

AC_MSG_CHECKING([for Pablo])

case "$withval" in
  yes)
    AC_MSG_RESULT(yes)
    HAVE_PABLO="yes"
    PABLO="pablo"
    ;;
  no)
    AC_MSG_RESULT(suppressed)
    ;;
  *)
    case "$withval" in
      *,*)
        pablo_inc="`echo $withval | cut -f1 -d,`"
        pablo_lib="`echo $withval | cut -f2 -d, -s`"
        ;;
      *)
        if test -n "$withval"; then
          pablo_inc="$withval/include"
          pablo_lib="$withval/lib"
        fi
        ;;
    esac

    dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
    dnl can mess some compilers up.
    if test "X$pablo_inc" = "X/usr/include"; then
      pablo_inc=""
    fi
    if test "X$pablo_lib" = "X/usr/lib"; then
      pablo_lib=""
    fi

    saved_CPPFLAGS="$CPPFLAGS"
    saved_LDFLAGS="$LDFLAGS"
    if test -n "$pablo_inc"; then
      CPPFLAGS="$CPPFLAGS -I$pablo_inc"
    fi

    if test -n "$pablo_lib"; then
      LDFLAGS="$LDFLAGS -L$pablo_lib"
    fi

    failed="no"
    if test -f "$pablo_inc/PabloTrace.h"; then
      :
    else
      failed="yes"
    fi

    if test -f "$pablo_lib/libPabloTraceExt.a"; then
      :
    else
      failed="yes"
    fi

    if test "$failed" = "yes"; then
      dnl Reset flags if failed
      CPPFLAGS="$saved_CPPFLAGS"
      LDFLAGS="$saved_LDFLAGS"
    else
      HAVE_PABLO="yes"
      PABLO="pablo"
    fi

    if test "$HAVE_PABLO" = "yes"; then
      AC_MSG_RESULT(yes)
    else
      AC_MSG_RESULT(no)
    fi
    ;;
esac

dnl ----------------------------------------------------------------------
dnl Is SSL library present? It is needed by GLOBUS-GASS and Grid Storage
dnl driver. SSL must be tested before them.
dnl
AC_SUBST([SSL]) SSL=yes
AC_ARG_WITH([ssl],
            [AC_HELP_STRING([--with-ssl=LIB],
                            [Use the SSL library [default=no]])],,
            withval=no)

case "$withval" in
   yes)
      AC_CHECK_LIB([crypto], [main],, [unset SSL])
      AC_CHECK_LIB([ssl], [SSL_get_version],, [unset SSL])
      ;;
   no)
      AC_MSG_CHECKING([for SSL])
      AC_MSG_RESULT([suppressed])
      unset SSL
      ;;
   *)
      saved_LDFLAGS="$LDFLAGS"
      if test "X$with_ssl" != "X/usr/lib"; then
        LDFLAGS="$LDFLAGS -L$with_ssl"
      fi
      AC_CHECK_LIB([crypto], [main],, [LDFLAGS="$saved_LDFLAGS"; unset SSL])
      AC_CHECK_LIB([ssl], [SSL_get_version],, [LDFLAGS="$saved_LDFLAGS"; unset SSL])
      ;;
esac

dnl ----------------------------------------------------------------------
dnl Is GLOBUS-GASS(1.1.0 or 1.1.1) Library present? It is also needed by 
dnl the Grid Storage driver.
dnl
AC_SUBST([GASS]) GASS="yes"
AC_SUBST([TESTGASS]) TESTGASS='$(srcdir)/testgass'
AC_ARG_WITH([gass],
            [AC_HELP_STRING([--with-gass=DIR],
                            [Use the GASS library [default=no]])],,
            withval=no)

case "$withval" in
  yes)
    AC_CHECK_HEADERS(globus_common.h,,unset GASS TESTGASS)
    AC_CHECK_LIB(globus_common,globus_module_activate,,unset GASS TESTGASS)
    AC_CHECK_LIB(globus_gass_cache,main,,unset GASS TESTGASS)
    AC_CHECK_LIB(globus_gaa,main,,unset GASS TESTGASS)
    AC_CHECK_LIB(globus_gss,main,,unset GASS TESTGASS)
    AC_CHECK_LIB(globus_gss_assist,main,,unset GASS TESTGASS)
    AC_CHECK_LIB(globus_io,main,,unset GASS TESTGASS)
    AC_CHECK_LIB(globus_gass_transfer_assist,main,,unset GASS TESTGASS)
    AC_CHECK_LIB(globus_gass_transfer,main,,unset GASS TESTGASS)
    AC_CHECK_LIB(globus_gass_file,globus_gass_open,,unset GASS TESTGASS)
    ;;
  no)
    AC_MSG_CHECKING([for GASS])
    AC_MSG_RESULT([suppressed])
    unset GASS TESTGASS
    ;;
  *)
    case "$withval" in
      *,*)
        gass_inc="`echo $withval | cut -f1 -d,`"
        gass_lib="`echo $withval | cut -f2 -d, -s`"
        ;;
      *)
        if test -n "$withval"; then
          gass_inc="$withval/include"
          gass_lib="$withval/lib"
        fi
        ;;
    esac

    dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
    dnl can mess some compilers up.
    if test "X$gass_inc" = "X/usr/include"; then
      gass_inc=""
    fi
    if test "X$gass_lib" = "X/usr/lib"; then
      gass_lib=""
    fi

    if test -n "$gass_inc"; then
      saved_CPPFLAGS="$CPPFLAGS"
      CPPFLAGS="$CPPFLAGS -I$gass_inc"
      AC_CHECK_HEADERS([globus_common.h],,
                       CPPFLAGS="$saved_CPPFLAGS"
                       unset GASS TESTGASS)
    else
      AC_CHECK_HEADERS([globus_common.h])
    fi

    if test -n "$gass_lib"; then
      saved_LDFLAGS="$LDFLAGS"
      LDFLAGS="$LDFLAGS -L$gass_lib"
      AC_CHECK_LIB(globus_common,globus_module_activate,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_gass_cache,main,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_gaa,main,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_gss,main,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_gss_assist,main,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_io,main,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_gass_transfer_assist,main,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_gass_transfer,main,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_gass_file,globus_gass_open,,unset GASS TESTGASS)
    else
      AC_CHECK_LIB(globus_common,globus_module_activate,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_gass_cache,main,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_gaa,main,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_gss,main,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_gss_assist,main,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_io,main,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_gass_transfer_assist,main,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_gass_transfer,main,,unset GASS TESTGASS)
      AC_CHECK_LIB(globus_gass_file,globus_gass_open,,unset GASS TESTGASS)
    fi
    ;;
esac

if test -n "$GASS"; then
  AC_DEFINE([HAVE_GASS], [1], [Define if the Globus GASS is defined])
fi

dnl ----------------------------------------------------------------------
dnl Are SRB Client and other system libraries(socket, elf) present?  
dnl
AC_SUBST([SRB]) SRB="yes"
AC_SUBST([TESTSRB]) TESTSRB='$(srcdir)/testsrb'
AC_ARG_WITH([srb],
            [AC_HELP_STRING([--with-srb=DIR],
                            [Use the SRB library [default=no]])],,
            withval=no)

case "$withval" in
  yes)
    AC_CHECK_HEADERS([srbClient.h],, [unset SRB TESTSRB])
    AC_CHECK_LIB([elf], [main],, [unset SRB TESTSRB])
    AC_CHECK_LIB([socket], [main],, [unset SRB TESTSRB])
    AC_CHECK_LIB([SrbClient], [clConnect],, [unset SRB TESTSRB])
    ;;
  no)
    AC_MSG_CHECKING([for SRB])
    AC_MSG_RESULT([suppressed])
    unset SRB TESTSRB
    ;;
  *)
    case "$withval" in
      *,*)
        srb_inc="`echo $withval | cut -f1 -d,`"
        srb_lib="`echo $withval | cut -f2 -d, -s`"
        ;;
      *)
        if test -n "$withval"; then
          srb_inc="$withval/include"
          srb_lib="$withval/lib"
        fi
        ;;
    esac

    dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
    dnl can mess some compilers up.
    if test "X$srb_inc" = "X/usr/include"; then
      srb_inc=""
    fi
    if test "X$srb_lib" = "X/usr/lib"; then
      srb_lib=""
    fi

    if test -n "$srb_inc"; then
      saved_CPPFLAGS="$CPPFLAGS"
      CPPFLAGS="$CPPFLAGS -I$srb_inc"
      AC_CHECK_HEADERS(srbClient.h,,
                       CPPFLAGS="$saved_CPPFLAGS"
                       unset SRB TESTSRB)
    else
      AC_CHECK_HEADERS(srbClient.h)
    fi

    if test -n "$srb_lib"; then
      saved_LDFLAGS="$LDFLAGS"
      LDFLAGS="$LDFLAGS -L$srb_lib"
      AC_CHECK_LIB(elf,main,,unset SRB TESTSRB)
      AC_CHECK_LIB(socket,main,,unset SRB TESTSRB)
      AC_CHECK_LIB(SrbClient,clConnect,,unset SRB TESTSRB)
    else
      AC_CHECK_LIB(elf,main,,unset SRB TESTSRB)
      AC_CHECK_LIB(socket,main,,unset SRB TESTSRB)
      AC_CHECK_LIB(SrbClient,clConnect,,unset SRB TESTSRB)
    fi
    ;;
esac

if test -n "$SRB"; then
  AC_DEFINE([HAVE_SRB], [1], [Define if the SRB is defined])
fi

dnl ----------------------------------------------------------------------
dnl Is LLNL's PDB present? If so then we'll compile the PDB-to-HDF5
dnl translator.
dnl
AC_SUBST([PDB2HDF])
AC_CHECK_LIB([pdb], [PD_open])
AC_CHECK_LIB([silo], [lite_PD_open])
AC_CHECK_HEADERS([pdb.h], [PDB2HDF=pdb2hdf])

dnl Checkpoint the cache
AC_CACHE_SAVE

dnl ----------------------------------------------------------------------
dnl Is the Pthreads library present?  It has a header file `pthread.h' and
dnl a library `-lpthread' and their locations might be specified with the
dnl `--with-pthread' command-line switch.  The value is an include path
dnl and/or a library path.  If the library path is specified then it must
dnl be preceded by a comma.
dnl
AC_SUBST([PTHREAD]) PTHREAD=yes
AC_ARG_WITH([pthread],
            [AC_HELP_STRING([--with-pthread=DIR],
                            [Use the Pthreads library [default=no]])],,
            withval=no)

case "$withval" in
  yes)
    AC_CHECK_HEADERS([pthread.h])
    AC_CHECK_LIB([pthread], [pthread_create],, [unset PTHREAD])
    ;;
  no)
    AC_MSG_CHECKING([for pthread])
    AC_MSG_RESULT([suppressed])
    unset PTHREAD
    ;;
  *)
    case "$withval" in
      *,*)
        pthread_inc="`echo $withval | cut -f1 -d,`"
        pthread_lib="`echo $withval | cut -f2 -d, -s`"
        ;;
      *)
        if test -n "$withval"; then
          pthread_inc="$withval/include"
          pthread_lib="$withval/lib"
        fi
        ;;
    esac

    dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
    dnl can mess some compilers up.
    if test "X$pthread_inc" = "X/usr/include"; then
      pthread_inc=""
    fi
    if test "X$pthread_lib" = "X/usr/lib"; then
      pthread_lib=""
    fi

    if test -n "$pthread_inc"; then
      saved_CPPFLAGS="$CPPFLAGS"
      CPPFLAGS="$CPPFLAGS -I$pthread_inc"
      AC_CHECK_HEADERS([pthread.h],, [CPPFLAGS="$saved_CPPFLAGS"; unset PTHREAD])
    else
      AC_CHECK_HEADERS([pthread.h],, [unset PTHREAD])
    fi

    if test -n "$pthread_lib"; then
      saved_LDFLAGS="$LDFLAGS"
      LDFLAGS="$LDFLAGS -L$pthread_lib"
      AC_CHECK_LIB([pthread], [pthread_create],,
                   [LDFLAGS="$saved_LDFLAGS"; unset PTHREAD])
    else
      AC_CHECK_LIB([pthread], [pthread_create],, [unset PTHREAD])
    fi
    ;;
esac

dnl ----------------------------------------------------------------------
dnl Enable thread-safe version of library.  It requires Pthreads support.
dnl
AC_MSG_CHECKING([for thread safe support])
AC_ARG_ENABLE([threadsafe],
              [AC_HELP_STRING([--enable-threadsafe],
                              [Enable thread safe capability])],
              THREADSAFE=$enableval)

case "X-$THREADSAFE" in
  X-|X-no)
    AC_MSG_RESULT([no])
    ;;
  X-yes)
    dnl Check that we can link a simple Pthread program.
    AC_TRY_LINK(, [pthread_create()],
                [AC_MSG_RESULT([yes]); THREADSAFE=yes],
                [AC_MSG_ERROR([needed pthread library not available])])
    ;;
  *)
    AC_MSG_RESULT([error])
    AC_MSG_ERROR([\'$enableval\' is not a valid threadsafe type])
    ;;
esac

if test "X$THREADSAFE" = "Xyes"; then
  AC_DEFINE([HAVE_THREADSAFE], [1], [Define if we have thread safe support])
fi

dnl ----------------------------------------------------------------------
dnl Check if they would like the HDF5 v1.6 compatibility functions
dnl compiled in
dnl
AC_MSG_CHECKING([whether HDF5 v1.6 compatibility functions enabled])
AC_ARG_ENABLE([hdf5v1_6],
              [AC_HELP_STRING([--enable-hdf5v1_6],
                              [Compile the HDF5 v1.6 compatibility
                               interface [default=no]])],
              [HDF5_V1_6_COMPAT=$enableval])

if test "$HDF5_V1_6_COMPAT" = "yes"; then
  AC_MSG_RESULT([yes])
  AC_DEFINE([WANT_H5_V1_6_COMPAT], [1],
            [Define if the HDF5 v1.6 compatibility functions are to be compiled in])
else
  AC_MSG_RESULT([no])
fi

dnl ----------------------------------------------------------------------
dnl Should the Stream Virtual File Driver be compiled in ?
dnl
AC_MSG_CHECKING([for Stream Virtual File Driver support])
AC_ARG_ENABLE([stream-vfd],
              [AC_HELP_STRING([--enable-stream-vfd],
                              [Build the Stream Virtual File Driver
                               [default=yes]])],
              [STREAM_VFD=$enableval],
              [STREAM_VFD=yes])

if test "$STREAM_VFD" = "yes"; then
  AC_MSG_RESULT([yes])
  AC_CHECK_HEADERS([netinet/tcp.h sys/filio.h])
  AC_DEFINE([HAVE_STREAM], [1],
            [Define if the stream virtual file driver should be compiled])

  dnl Check if 'socklen_t' available
  AC_MSG_CHECKING([if socklen_t is defined])
  AC_TRY_COMPILE([
#include <stdio.h>
#include <stdlib.h>
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
  ],
    [socklen_t foo; return 0;],
    AC_DEFINE([HAVE_SOCKLEN_T], 1, [Define if \`socklen_t' is defined])
    AC_MSG_RESULT([yes]),
    AC_MSG_RESULT([no])
  )
else
  AC_MSG_RESULT([not configured])
fi

dnl ----------------------------------------------------------------------
dnl How does one figure out the local time zone?  Anyone know of a
dnl Posix way to do this?
dnl

dnl First check if `struct tm' has a `tm_gmtoff' member.
AC_MSG_CHECKING([for tm_gmtoff in struct tm])
AC_TRY_COMPILE([
#include <sys/time.h>
#include <time.h>], [struct tm tm; tm.tm_gmtoff=0;],
AC_DEFINE([HAVE_TM_GMTOFF], [1],
          [Define if \`tm_gmtoff' is a member of \`struct tm'])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))

dnl check if `struct tm' has a `__tm_gmtoff' member.
AC_MSG_CHECKING([for __tm_gmtoff in struct tm])
AC_TRY_COMPILE([
#include <sys/time.h>
#include <time.h>], [struct tm tm; tm.__tm_gmtoff=0;],
AC_DEFINE([HAVE___TM_GMTOFF], [1],
          [Define if \`__tm_gmtoff' is a member of \`struct tm'])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))

dnl Check whether the global variable `timezone' is defined.
AC_MSG_CHECKING([for global timezone variable])
AC_TRY_LINK([
#include <sys/time.h>
#include <time.h>], [timezone=0;],
AC_DEFINE([HAVE_TIMEZONE], [1],
          [Define if \`timezone' is a global variable])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))

dnl Check whether `struct timezone' is defined.
AC_STRUCT_TIMEZONE
AC_MSG_CHECKING([for struct timezone])
AC_TRY_COMPILE([
#include <sys/types.h>
#include <sys/time.h>
#include <time.h>], [struct timezone tz; tz.tz_minuteswest=0;],
AC_DEFINE([HAVE_STRUCT_TIMEZONE], [1],
          [Define if \`struct timezone' is defined])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))

dnl ----------------------------------------------------------------------
dnl Does the struct stat have the st_blocks field?  This field is not Posix.
dnl
AC_MSG_CHECKING([for st_blocks in struct stat])
AC_TRY_COMPILE([
#include <sys/stat.h>],[struct stat sb; sb.st_blocks=0;],
AC_DEFINE([HAVE_STAT_ST_BLOCKS], [1],
          [Define if \`struct stat' has the \`st_blocks' field])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))

dnl ----------------------------------------------------------------------
dnl How do we figure out the width of a tty in characters?
dnl
AC_CHECK_FUNCS(_getvideoconfig gettextinfo GetConsoleScreenBufferInfo)
AC_CHECK_FUNCS(_scrsize ioctl)

AC_MSG_CHECKING([for struct videoconfig])
AC_TRY_COMPILE(,[struct videoconfig w; w.numtextcols=0;],
AC_DEFINE([HAVE_STRUCT_VIDEOCONFIG], [1],
          [Define if \`struct videoconfig' is defined])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))

AC_MSG_CHECKING([for struct text_info])
AC_TRY_COMPILE(, [struct text_info w; w.screenwidth=0;],
AC_DEFINE([HAVE_STRUCT_TEXT_INFO], [1],
          [Define if \`struct text_info' is defined])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))

AC_MSG_CHECKING([for TIOCGWINSZ])
AC_TRY_COMPILE([#include <sys/ioctl.h>],[int w=TIOCGWINSZ;],
AC_DEFINE([HAVE_TIOCGWINSZ], [1],
          [Define if the ioctl TIOGWINSZ is defined])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))

AC_MSG_CHECKING([for TIOCGETD])
AC_TRY_COMPILE([#include <sys/ioctl.h>],[int w=TIOCGETD;],
AC_DEFINE([HAVE_TIOCGETD], [1],
          [Define if the ioctl TIOCGETD is defined])
AC_MSG_RESULT([yes]),
AC_MSG_RESULT([no]))


dnl ----------------------------------------------------------------------
dnl Check for functions.
dnl
AC_CHECK_FUNCS(fork frexpf frexpl gethostname getpwuid getrusage)
AC_CHECK_FUNCS(BSDgettimeofday longjmp setsysinfo sigaction)
AC_CHECK_FUNCS(signal snprintf vsnprintf strdup system waitpid)

dnl ----------------------------------------------------------------------
dnl Check compiler characteristics
dnl
AC_C_CONST
AC_C_INLINE

AC_MSG_CHECKING([for __attribute__ extension])
AC_TRY_COMPILE(,[int __attribute__((unused)) x],
               AC_DEFINE([HAVE_ATTRIBUTE], [1],
                         [Define if the __attribute__(()) extension is present])
               AC_MSG_RESULT([yes]),
               AC_MSG_RESULT([no]))

AC_MSG_CHECKING([for __FUNCTION__ extension])
AC_TRY_COMPILE(,[(void)__FUNCTION__],
               AC_DEFINE([HAVE_FUNCTION], [1],
                         [Define if the compiler understand the __FUNCTION__ keyword])
               AC_MSG_RESULT([yes]),
               AC_MSG_RESULT([no]))

dnl ----------------------------------------------------------------------
dnl Try to figure out how to print `long long'.  Some machines use `%lld'
dnl and others use `%qd'.  There may be more!  The final `l' is a
dnl default in case none of the others work.
dnl Need to patch up LD_LIBRARY_PATH so that the execution can find all
dnl the dynamic library.  The correct way to do it should be updating
dnl LD_LIBRARY_PATH along with LDFLAGS or do it with the AC_TRY_RUN macro.
dnl
AC_MSG_CHECKING([how to print long long])
AC_CACHE_VAL([hdf5_cv_printf_ll],
LD_LIBRARY_PATH="$LD_LIBRARY_PATH`echo $LDFLAGS | sed -e 's/-L/:/g' -e 's/ //g'`"
export LD_LIBRARY_PATH

for hdf5_cv_printf_ll in l L ll q unknown; do
   AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>

int main(void)
{
	char *s = malloc(128);
	long long x = (long long)1048576 * (long long)1048576;
	sprintf(s,"%${hdf5_cv_printf_ll}d",x);
	exit(strcmp(s,"1099511627776"));
}
   ], break,,continue)
done)dnl

AC_MSG_RESULT([%${hdf5_cv_printf_ll}d and %${hdf5_cv_printf_ll}u])
AC_DEFINE_UNQUOTED([PRINTF_LL_WIDTH], ["$hdf5_cv_printf_ll"], 
                   [Width for printf() for type \`long long' or \`__int64', use \`ll'])

dnl ----------------------------------------------------------------------
dnl Check if pthread_attr_setscope(&attribute, PTHREAD_SCOPE_SYSTEM)
dnl is supported on this system
dnl
AC_MSG_CHECKING([Threads support system scope])
AC_CACHE_VAL([hdf5_cv_system_scope_threads],
[AC_TRY_RUN([
#if STDC_HEADERS
#include <stdlib.h>
#include <pthread.h>
#endif

int main(void)
{
    pthread_attr_t attribute;
    int ret;

    pthread_attr_init(&attribute);
    ret=pthread_attr_setscope(&attribute, PTHREAD_SCOPE_SYSTEM);
    exit(ret==0 ? 0 : 1);
}
], [hdf5_cv_system_scope_threads=yes], [hdf5_cv_system_scope_threads=no],)])

if test ${hdf5_cv_system_scope_threads} = "yes"; then
  AC_DEFINE([SYSTEM_SCOPE_THREADS], [1],
            [Define if your system supports pthread_attr_setscope(&attribute, PTHREAD_SCOPE_SYSTEM) call.])
  AC_MSG_RESULT([yes])
else
  AC_MSG_RESULT([no])
fi

dnl ----------------------------------------------------------------------
dnl Checking to see if GPFS is available on this filesystem
dnl
AC_ARG_ENABLE([gpfs],
              [AC_HELP_STRING([--enable-gpfs],
                              [Enable GPFS hints for the MPI/POSIX file
                               driver. [default=no]])],,
              [enableval=no])

case "X-$enableval" in
  X-yes)
    AC_CHECK_HEADERS([gpfs.h],
                     AC_MSG_CHECKING([for GPFS support])
                     AC_TRY_COMPILE([#include <gpfs.h>],
                                    [int fd = 0; gpfs_fcntl(fd, (void *)0);],
                                    AC_DEFINE(HAVE_GPFS, 1,
                                              [Define if we have GPFS support])
                                    AC_MSG_RESULT([yes])
                                    LIBS="$LIBS -lgpfs"
                                    GPFS="yes",
                                    AC_MSG_RESULT([no])
                                    GPFS="no"))
    ;;
  X-no|*)
    AC_MSG_CHECKING([for gpfs])
    AC_MSG_RESULT([suppressed])
    ;;
esac
   
dnl ----------------------------------------------------------------------
dnl Turn on debugging by setting compiler flags
dnl
AC_MSG_CHECKING(for debug flags)
AC_ARG_ENABLE([debug],
              [AC_HELP_STRING([--enable-debug=all],
                              [Turn on debugging in all packages. One may
                               also specify a comma-separated list of
                               package names without the leading H5 or
                               the word no. The default is most
                               packages.])],
              [DEBUG_PKG=$enableval])

AC_SUBST([DEBUG_PKG])
all_packages="ac,b,d,e,f,g,hg,hl,i,mf,mm,o,p,s,t,v,z"
case "X-$DEBUG_PKG" in
  X-|X-yes)
    DEBUG_PKG="d,e,f,g,hg,i,mm,o,p,s,t,v,z"
    CPPFLAGS="$CPPFLAGS -UNDEBUG"
    AC_MSG_RESULT([default ($DEBUG_PKG)])
    ;;
  X-all)
    DEBUG_PKG=$all_packages
    CPPFLAGS="$CPPFLAGS -UNDEBUG"
    AC_MSG_RESULT([all ($DEBUG_PKG)])
    ;;
  X-no|X-none)
    AC_MSG_RESULT([none])
    DEBUG_PKG=
    CPPFLAGS="$CPPFLAGS -DNDEBUG"
    ;;
  *)
    AC_MSG_RESULT([$DEBUG_PKG])
    ;;
esac

if test -n "$DEBUG_PKG"; then
  for pkg in `echo $DEBUG_PKG | tr 'a-z,' 'A-Z '`; do
    CPPFLAGS="$CPPFLAGS -DH5${pkg}_DEBUG"
  done
fi

dnl ----------------------------------------------------------------------
dnl Check if they would like the function stack support compiled in
dnl
AC_MSG_CHECKING([whether function stack tracking is enabled])
AC_ARG_ENABLE([funcstack],
              [AC_HELP_STRING([--enable-funcstack],
                              [Enable the function stack tracing.
                               Default=no if debug is disabled.])],
              [FUNCSTACK=$enableval])

dnl Default to no if debug is disabled
if test "X-$FUNCSTACK" = X- ; then
  if test -z "$DEBUG_PKG" ; then
    FUNCSTACK=no
  else
    FUNCSTACK=yes
  fi
fi
case "X-$FUNCSTACK" in
  X-|X-yes)
      FUNCSTACK="yes"
      AC_MSG_RESULT([yes])
      AC_DEFINE([HAVE_FUNCSTACK], [1],
                [Define if the function stack tracing code is to be compiled in])
    ;;
  *)
      AC_MSG_RESULT([no])
    ;;
esac

dnl ----------------------------------------------------------------------
dnl Enable tracing of the API
dnl This must come after the enable-debug since it depends on debug.
dnl
AC_SUBST([TRACE_API])
AC_MSG_CHECKING([for API tracing]);
AC_ARG_ENABLE([trace],
              [AC_HELP_STRING([--enable-trace],
                              [Enable API tracing capability. Default=no
                               if debug is disabled.])],
              TRACE=$enableval)

dnl Default to no if debug is disabled
if test "X-$TRACE" = X- ; then
  if test -z "$DEBUG_PKG" ; then
    TRACE=no
  else
    TRACE=yes
  fi
fi

case "X-$TRACE" in
  X-yes)
    AC_MSG_RESULT([yes])
    TRACE_API=yes
    CPPFLAGS="$CPPFLAGS -DH5_DEBUG_API"
    ;;
  X-no|*)
    AC_MSG_RESULT([no])
    TRACE_API=no
    CPPFLAGS="$CPPFLAGS -UH5_DEBUG_API"
    ;;
esac

dnl Checkpoint the cache
AC_CACHE_SAVE

dnl ----------------------------------------------------------------------
dnl The following variables are used to distinguish between building a
dnl serial and parallel library.
dnl
dnl    HAVE_PARALLEL	-- defined in H5config.h if we are building
dnl			   a parallel library even if configure wasn't
dnl			   able to find some header file or library that
dnl			   might be required. This is defined if the
dnl			   compiler looks like a parallel compiler (e.g.,
dnl			   mpicc or mpcc) or if the user explicitly states
dnl			   that a parallel library is being built by supplying
dnl			   the `--enable-parallel' configure switch.
dnl
dnl    PARALLEL		-- This variable is set to a non-null value if
dnl			   configure thinks we're compiling a parallel
dnl			   version of the library.
dnl
dnl    RUNSERIAL	-- This is a command which will be prepended to
dnl			   the executable name to run the executable using
dnl			   a single process. For serial versions of the
dnl			   library this will normally be empty. For parallel
dnl			   versions it might be something like `mpirun -np 1'.
dnl			   The value of this variable is substituted in *.in
dnl			   files.
dnl
dnl    RUNPARALLEL	-- This is a command which will be prepended to
dnl			   the executable name to run the executable on
dnl			   multiple processors. For the serial library the
dnl			   value will normally be the empty string. For
dnl			   parallel library it should be something like
dnl			   `mpi -np $$NPROCS' where NPROCS will eventually
dnl			   contain the number of processors on which to run
dnl			   the executable (the double dollarsigns are to
dnl			   protect the expansion until make executes the
dnl			   command).  The value of this variable is
dnl			   substituted in *.in files.
dnl
AC_SUBST([PARALLEL])
AC_SUBST([RUNSERIAL])
AC_SUBST([RUNPARALLEL])
AC_SUBST([TESTPARALLEL])

dnl ----------------------------------------------------------------------
dnl If the compiler is obviously a parallel compiler then we're building
dnl a parallel version of hdf5 and should define HAVE_PARALLEL. Furthermore,
dnl the name of the compiler might tell us how to run the resulting
dnl executable. For `mpicc' the executable should be run with `mpirun' from
dnl the same directory as mpicc if it exists.
dnl
case "$CC_BASENAME" in
  mpicc)
    dnl The mpich compiler. Use mpirun from the same directory if it
    dnl exists.
    PARALLEL=mpicc
    AC_MSG_CHECKING([for mpirun])

    dnl Find the path where mpicc is located.
    cmd="`echo $CC | cut -f1 -d' '`"
    if (echo $cmd | grep / >/dev/null); then
      path="`echo $cmd | sed 's/\(.*\)\/.*$/\1/'`"
    else
      for path in `echo $PATH | tr : ' '`; do
        if test -x $path/$cmd; then
          break
        fi
      done
    fi

    dnl Is there an mpirun at that path?
    if test -x $path/mpirun; then
      AC_MSG_RESULT([$path/mpirun])
      RUNSERIAL="${RUNSERIAL:-none}"

      if test -z "$RUNPARALLEL"; then
        RUNPARALLEL="$path/mpirun -np \$\${NPROCS:=3}"
      fi
    else
      AC_MSG_RESULT([none])
    fi
    ;;

  hcc)
    dnl The LAM compiler. Use mpirun_lam or mpirun from the same directory
    dnl if it exists.
    PARALLEL=hcc
    AC_MSG_CHECKING([for mpirun_lam or mpirun])

    dnl Find the path where hcc is located
    cmd="`echo $CC | cut -f1 -d' '`"
    if (echo $cmd | grep / >/dev/null); then
      path="`echo $cmd | sed 's/\(.*\)\/.*$/\1/'`"
    else
      for path in `echo $PATH | tr : ' '`; do
        if test -x $path/$cmd; then
          break
        fi
      done
    fi

    dnl Is there an mpirun_lam or mpirun at that path?
    if test -x $path/mpirun_lam -o -x $path/mpirun; then
      if test -x $path/mpirun_lam; then
        cmd=mpirun_lam
      else
        cmd=mpirun
      fi
      AC_MSG_RESULT([$path/$cmd])
      RUNSERIAL="${RUNSERIAL:-none}"
      if test -z "$RUNPARALLEL"; then
        RUNPARALLEL="$path/$cmd -np \$\${NPROCS:=3}"
      fi
    else
      AC_MSG_RESULT([none])
    fi
    ;;

  mpcc|mpcc_r)
    dnl The IBM compiler
    PARALLEL="$CC_BASENAME"
    ;;

  *)
    dnl Probably not a parallel compiler, but if `--enable-parallel'
    dnl is defined below then we're still building a parallel hdf5.
    ;;
esac

dnl ----------------------------------------------------------------------
dnl If the Fortran compiler is obviously a parallel compiler then we're
dnl building a parallel version of hdf5 and should define HAVE_PARALLEL.
dnl Furthermore, the name of the compiler might tell us how to run the
dnl resulting executable. For `mpif90' the executable should be run with
dnl `mpirun' from the same directory as mpif90 if it exists.
dnl
if test "X$HDF_FORTRAN" = "Xyes"; then
  dnl Change to the Fortran 90 language
  AC_LANG_FORTRAN9X

  case "$F9X" in
    *mpif90*)
      dnl The Fortran mpich compiler. Use mpirun from the same directory
      dnl if it exists.
      PARALLEL=mpif90
      AC_MSG_CHECKING([for mpirun])

      dnl Find the path where mpif90 is located.
      cmd=`echo $F9X |cut -f1 -d' '`
      if (echo $cmd |grep / >/dev/null); then
        path="`echo $cmd |sed 's/\(.*\)\/.*$/\1/'`"
      else
        for path in `echo $PATH |tr : ' '`; do
          if test -x $path/$cmd; then
            break;
          fi
        done
      fi

      dnl Is there an mpirun at that path?
      if test -x $path/mpirun; then
        AC_MSG_RESULT([$path/mpirun])
        RUNSERIAL="${RUNSERIAL:-none}"

        if test -z "$RUNPARALLEL"; then
          RUNPARALLEL="$path/mpirun -np \$\${NPROCS:=2}"
        fi
      else
        AC_MSG_RESULT([none])
      fi
      ;;

    *mpxlf* | *mpxlf_r* | *mpxlf90* | *mpxlf90_r* | *mpxlf95* | *mpxlf95_r*)
      dnl The IBM compiler
      PARALLEL="$F9X"
      ;;

    *)
      dnl Probably not a parallel compiler, but if `--enable-parallel'
      dnl is defined below then we're still building a parallel hdf5.
      ;;
  esac

  dnl Change to the C language
  AC_LANG_C
fi

dnl ----------------------------------------------------------------------
dnl What header files and libraries do we have to look for for parallel
dnl support?  For the most part, search paths are already specified with
dnl CPPFLAGS and LDFLAGS or are known to the compiler.  If the user says
dnl `--disable-parallel' but specifies a known parallel compiler (like mpicc
dnl or mpcc) then parallel support is enabled but configure doesn't search
dnl for any parallel header files or libraries.
dnl
AC_ARG_ENABLE([parallel],
              [AC_HELP_STRING([--enable-parallel],
                              [Search for MPI-IO and MPI support files])])

AC_MSG_CHECKING([for parallel support files])
case "X-$enable_parallel" in
  X-|X-no|X-none)
    dnl Either we are not compiling for parallel or the header and
    dnl library files and locations are known to the compiler (this is
    dnl the case for a correct installation of mpicc for instance).
    AC_MSG_RESULT([skipped])
    ;;

  X-yes)
    dnl We want to compile a parallel library with a compiler that
    dnl may already know how to link with MPI and MPI-IO.
    AC_MSG_RESULT([provided by compiler])
    PARALLEL=yes

    dnl Try link a simple MPI program.  If fail, try again with -lmpi.
    AC_TRY_LINK(, MPI_Init(),, AC_CHECK_LIB(mpi, MPI_Init,, PARALLEL=no))

    dnl Then try link a simple MPI-IO program. If fail, try again with
    dnl -lmpio.
    if test "X$PARALLEL" = "Xyes"; then
      AC_TRY_LINK(, [MPI_File_open()],,
                  [AC_CHECK_LIB([mpio], [MPI_File_open],, [PARALLEL=no])])
    fi

    if test "X$HDF_FORTRAN" = "Xyes"; then
      dnl Change to the Fortran 90 language
      AC_LANG_FORTRAN9X

      dnl Try link a simple MPI program.  If fail, try again with -lmpi.
      AC_TRY_FLINK(mpif.h, [
          call mpi_file_open( ierr )],,
          AC_CHECK_FLIB(mpi, [
            include 'mpif.h'
            call mpi_file_open( ierr )],, PARALLEL=no))

      dnl Then try link a simple MPI-IO program.  If fail, try again with
      dnl -lmpio.
      if test "X$PARALLEL" = "Xyes"; then
        AC_TRY_FLINK(mpif.h, [
            call mpi_file_open( ierr )],,
            AC_CHECK_FLIB(mpio, [
              include 'mpif.h'
              call mpi_file_open( ierr )],, PARALLEL=no))
      fi

      dnl Change to the C language
      AC_LANG_C
    fi

    dnl Set RUNPARALLEL to mpirun if not set yet.
    if test "X$PARALLEL" = "Xyes" -a -z "$RUNPARALLEL"; then
      RUNPARALLEL="mpirun -np \$\${NPROCS:=3}"
    fi
    ;;

  *)
    AC_MSG_RESULT([error])
    AC_MSG_ERROR([\'$enable_parallel\' is not a valid parallel search type])
    ;;
esac

dnl ----------------------------------------------------------------------
dnl Print some other parallel information and do some sanity checks.
dnl
AC_SUBST([ADD_PARALLEL_FILES]) ADD_PARALLEL_FILES="no"

if test -n "$PARALLEL"; then
  dnl The 'testpar' directory should participate in the build
  TESTPARALLEL=testpar

  dnl We are building a parallel library
  AC_DEFINE([HAVE_PARALLEL], [1], [Define if we have parallel support])

  dnl Display what we found about running programs
  AC_MSG_CHECKING([prefix for running on one processor])
  AC_MSG_RESULT([$RUNSERIAL])
  AC_MSG_CHECKING([prefix for running in parallel])
  AC_MSG_RESULT([$RUNPARALLEL])

  dnl Check that we can link a simple MPI and MPI-IO application
  AC_MSG_CHECKING([whether a simple MPI-IO program can be linked])
  AC_TRY_LINK(, [MPI_Init(); MPI_File_open();],
              AC_MSG_RESULT([yes]),
              AC_MSG_RESULT([no])
              AC_MSG_ERROR([unable to link a simple MPI-IO application]))

  dnl There *must* be some way to run in parallel even if it's just the
  dnl word `none'.
  if test -z "$RUNPARALLEL"; then
    AC_MSG_ERROR([no way to run a parallel program])
  fi

  dnl If RUNSERIAL or RUNPARALLEL is the word `none' then replace it with
  dnl the empty string.
  if test "X$RUNSERIAL" = "Xnone"; then
    RUNSERIAL=""
  fi
  if test "X$RUNPARALLEL" = "Xnone"; then
    RUNPARALLEL=""
  fi

  if test "X$HDF_FORTRAN" = "Xyes"; then
    ADD_PARALLEL_FILES="yes"
    AC_MSG_CHECKING([for MPI_Comm_c2f and MPI_Comm_f2c functions])

    AC_TRY_LINK([#include <mpi.h>],
      [MPI_Comm c_comm; MPI_Comm_c2f(c_comm)],
      AC_DEFINE([HAVE_MPI_MULTI_LANG_Comm], [1],
                [Define if \`MPI_Comm_c2f' and \`MPI_Comm_f2c' exists])
      AC_MSG_RESULT([yes]),
      AC_MSG_RESULT([no])
    )

    AC_MSG_CHECKING([for MPI_Info_c2f and MPI_Info_f2c functions])
    AC_TRY_LINK([#include <mpi.h>],
      [MPI_Info c_info; MPI_Info_c2f(c_info)],
      AC_DEFINE([HAVE_MPI_MULTI_LANG_Info], [1],
                [Define if \`MPI_Info_c2f' and \`MPI_Info_f2c' exists])
      AC_MSG_RESULT([yes]),
      AC_MSG_RESULT([no])
    )
  fi

  dnl --------------------------------------------------------------------
  dnl Do we want MPE instrumentation feature on?
  dnl
  dnl This must be done after enable-parallel is checked since it depends
  dnl on a mpich compiler.
  dnl
  AC_SUBST([MPE]) MPE=yes
  AC_ARG_WITH([mpe],
              [AC_HELP_STRING([--with-mpe=DIR],
                              [Use MPE instrumentation [default=no]])],,
              [withval=no])

  case "X-$withval" in
    X-|X-no|X-none)
      AC_MSG_CHECKING([for MPE])
      AC_MSG_RESULT([suppressed])
      unset MPE
      ;;
    X-yes)
      AC_CHECK_HEADERS([mpe.h],, [unset MPE])
      AC_CHECK_LIB([mpe], [MPE_Init_log],, [unset MPE])
      AC_CHECK_LIB([lmpe], [CLOG_Init],, [unset MPE])
      ;;
    *)
      case "$withval" in
        *,*)
          mpe_inc="`echo $withval | cut -f1 -d,`"
          mpe_lib="`echo $withval | cut -f2 -d, -s`"
          ;;
        *)
          if test -n "$withval"; then
            mpe_inc="$withval/include"
            mpe_lib="$withval/lib"
          fi
          ;;
      esac
  
      dnl Trying to include -I/usr/include and -L/usr/lib is redundant and
      dnl can mess some compilers up.
      if test "X$mpe_inc" = "X/usr/include"; then
        mpe_inc=""
      fi
      if test "X$mpe_lib" = "X/usr/lib"; then
        mpe_lib=""
      fi
  
      if test -n "$mpe_inc"; then
        saved_CPPFLAGS="$CPPFLAGS"
        CPPFLAGS="$CPPFLAGS -I$mpe_inc"
        AC_CHECK_HEADERS([mpe.h],, [CPPFLAGS="$saved_CPPFLAGS"; unset MPE])
      else
        AC_CHECK_HEADERS([mpe.h],, [unset MPE])
      fi
  
      if test -n "$mpe_lib"; then
        saved_LDFLAGS="$LDFLAGS"
        LDFLAGS="$LDFLAGS -L$mpe_lib"
        AC_CHECK_LIB([mpe], [MPE_Init_log],,
                     [LDFLAGS="$saved_LDFLAGS"; unset MPE])
        AC_CHECK_LIB([lmpe], [CLOG_Init],,
                     [LDFLAGS="$saved_LDFLAGS"; unset MPE])
      else
        AC_CHECK_LIB([mpe], [MPE_Init_log],, [unset MPE])
        AC_CHECK_LIB([lmpe], [CLOG_Init],, [unset MPE])
      fi
      ;;
  esac

  if test "X-$MPE" = "X-yes"; then
    AC_DEFINE([HAVE_MPE], [1], [Define if we have MPE support])
  fi

  dnl ----------------------------------------------------------------------
  dnl Check if they would like the "Flexible parallel" interface enabled
  dnl 
  AC_MSG_CHECKING([if Flexible Parallel HDF5 interface enabled])
  AC_ARG_ENABLE([fphdf5],
                [AC_HELP_STRING([--enable-fphdf5],
                                [Enable the Flexible Parallel HDF5
                                 interface [default=no]])],
                [FPHDF5=$enableval],
                [FPHDF5="no"])
  if test "X$FPHDF5" = "Xyes"; then
    AC_DEFINE(HAVE_FPHDF5, 1,
              [Define if we want flexible parallel HDF5 support])
    AC_MSG_RESULT([yes])
  else
    AC_MSG_RESULT([no])
  fi

  dnl ----------------------------------------------------------------------
  dnl Set the flag to indicate that the MPI_File_set_size() function
  dnl works with files over 2GB, unless it's already set in the cache.
  dnl (This flag should be set for all machines, except for ASCI Red, where
  dnl the cache value is set in it's config file)
  dnl
  AC_MSG_CHECKING([if MPI_File_set_size works for files over 2GB])
  AC_CACHE_VAL([hdf5_cv_mpi_file_set_size_big], [hdf5_cv_mpi_file_set_size_big=yes])
  
  if test ${hdf5_cv_mpi_file_set_size_big} = "yes"; then
    AC_DEFINE([MPI_FILE_SET_SIZE_BIG], [1],
              [Define if your system's \`MPI_File_set_size' function works for files over 2GB.])
    AC_MSG_RESULT([yes])
  else
    AC_MSG_RESULT([no])
  fi
  
fi
  
dnl ----------------------------------------------------------------------
dnl Turn on internal I/O filters by setting macros in header files
dnl Internal I/O filters are contained entirely within the library and do
dnl not depend on external headers or libraries.  The shuffle filter is
dnl an example of an internal filter, while the gzip filter is an example of
dnl an external filter.  Each external filter is controlled with an
dnl "--with-foo=" configure flag.
dnl
AC_SUBST([FILTERS])
AC_MSG_CHECKING([for I/O filters])
AC_ARG_ENABLE([filters],
              [AC_HELP_STRING([--enable-filters=all],
                              [Turn on all internal I/O filters. One may
                               also specify a comma-separated list of filters
                               or the word no.  The default is all internal
                               I/O filters.])],
              [FILTERS=$enableval])

dnl Eventually: all_filters="shuffle,foo,bar,baz"
all_filters="shuffle,fletcher32"
case "X-$FILTERS" in
  X-|X-all)
    FILTERS=$all_filters
    AC_MSG_RESULT([all ($FILTERS)])
    ;;
  X-no|X-none)
    AC_MSG_RESULT([none])
    FILTERS="none"
    ;;
  *)
    AC_MSG_RESULT([$FILTERS])
    ;;
esac

if test -n "$FILTERS"; then
  for filter in `echo $FILTERS | tr 'a-z,' 'A-Z '`; do
    dnl ------------------------------------------------------------------
    dnl Have to use separate 'if' construct for each filter, so that
    dnl autoheader can detect the AC_DEFINE for each one...
    dnl
    if test $filter = "SHUFFLE"; then
      AC_DEFINE([HAVE_FILTER_SHUFFLE], [1],
                [Define if support for shuffle filter is enabled])
    fi
    if test $filter = "FLETCHER32"; then
      AC_DEFINE([HAVE_FILTER_FLETCHER32], [1],
                [Define if support for Fletcher32 checksum is enabled])
    fi
  done
fi

dnl ----------------------------------------------------------------------
dnl This is defined only when we're using CodeWarrior, since it has a
dnl broken "open()" call.
dnl
if test 1 = 2; then
  AC_DEFINE([NO_SHARED_WRITING], [1],
            [Define if shared writing must be disabled (CodeWarrior only)])
fi

dnl ----------------------------------------------------------------------
dnl Set the flag to indicate that the machine can handle converting
dnl denormalized floating-point values.
dnl (This flag should be set for all machines, except for the Crays, where
dnl the cache value is set in it's config file)
dnl
AC_MSG_CHECKING([if converting denormalized floating-point values is possible])
AC_CACHE_VAL([hdf5_cv_convert_denormal_float], [hdf5_cv_convert_denormal_float=yes])

if test ${hdf5_cv_convert_denormal_float} = "yes"; then
  AC_DEFINE([CONVERT_DENORMAL_FLOAT], [1],
            [Define if your system can handle converting denormalized floating-point values.])
  AC_MSG_RESULT([yes])
else
  AC_MSG_RESULT([no])
fi

dnl ----------------------------------------------------------------------
dnl Set the flag to indicate that the machine can accurately convert
dnl 'unsigned (long) long' values to 'float' and 'double' values.
dnl (This flag should be set for all machines, except for the SGIs, where
dnl the cache value is set in the config/irix6.x config file) and Solaris
dnl 64-bit machines, where the short program below tests if round-up is 
dnl correctly handled.
dnl
AC_MSG_CHECKING([if accurately converting unsigned long long to floating-point values works])

if test ${host_os_novers} = "solaris2.x"; then
    AC_CACHE_VAL([hdf5_cv_sw_ulong_to_fp_bottom_bit_works],
    [AC_TRY_RUN([
    int main(void)
    {
        unsigned long l1;
        unsigned long l2;
        unsigned long l3;
        unsigned long l4;
        unsigned long long ld1;
        unsigned long long ld2;
        unsigned long long ld3;
        unsigned long long ld4;
        double        d1, d2, d3, d4;
        unsigned char s[8];
        int           ret = 0;

        if(sizeof(unsigned long)==8) {
            l1 = 0xf000000000000b00; /*Round-down case*/
            l2 = 0xf000000000000401; /*Round-up case*/
            l3 = 0xf000000000000400; /*Round-down case*/
            l4 = 0xf000000000000c00; /*Round-up case*/
            
            d1 = (double)l1;
            d2 = (double)l2;
            d3 = (double)l3;
            d4 = (double)l4;
        } else if(sizeof(unsigned long long)==8) { 
            ld1 = 0xf000000000000b00; /*Round-down case*/
            ld2 = 0xf000000000000401; /*Round-up case*/
            ld3 = 0xf000000000000400; /*Round-down case*/
            ld4 = 0xf000000000000c00; /*Round-up case*/
            
            d1 = (double)ld1;
            d2 = (double)ld2;
            d3 = (double)ld3;
            d4 = (double)ld4;
        } else {
            ret = 1;
            goto done;
        }
        
        memcpy(s, &d1, 8);
        if(s[7]!=1)
            ret = 1;

        memcpy(s, &d2, 8);
        if(s[7]!=1)
            ret = 1;

        memcpy(s, &d3, 8);
        if(s[7]!=0)
            ret = 1;

        memcpy(s, &d4, 8);
        if(s[7]!=2)
            ret = 1;

done:
        exit(ret);
    }
    ], [hdf5_cv_sw_ulong_to_fp_bottom_bit_works=yes], [hdf5_cv_sw_ulong_to_fp_bottom_bit_works=no],)])
else
    AC_CACHE_VAL([hdf5_cv_sw_ulong_to_fp_bottom_bit_works], [hdf5_cv_sw_ulong_to_fp_bottom_bit_works=yes])
fi

if test ${hdf5_cv_sw_ulong_to_fp_bottom_bit_works} = "yes"; then
  AC_DEFINE([SW_ULONG_TO_FP_BOTTOM_BIT_WORKS], [1],
            [Define if your system can accurately convert unsigned long long values to floating-point values.])
  AC_MSG_RESULT([yes])
else
  AC_MSG_RESULT([no])
fi

dnl ----------------------------------------------------------------------
dnl Set the flag to indicate that the machine can _compile_
dnl 'unsigned long long' to 'float' and 'double' typecasts.
dnl (This flag should be set for all machines, except for under Windows when
dnl compiled with Visual Studio 6, where the macro value is set in the
dnl src/H5pubconf.h file)
dnl
AC_MSG_CHECKING([if compiling unsigned long long to floating-point typecasts work])
AC_CACHE_VAL([hdf5_cv_ullong_to_fp_cast_works], [hdf5_cv_ullong_to_fp_cast_works=yes])

if test ${hdf5_cv_ullong_to_fp_cast_works} = "yes"; then
  AC_DEFINE([ULLONG_TO_FP_CAST_WORKS], [1],
            [Define if your system can compile unsigned long long to floating-point casts.])
  AC_MSG_RESULT([yes])
else
  AC_MSG_RESULT([no])
fi

dnl ----------------------------------------------------------------------
dnl Set some variables for general configuration information to be saved
dnl and installed with the libraries.
dnl

dnl HDF5 version from the first line of the README.txt file.
H5_VERSION="`cut -d' ' -f3 $srcdir/README.txt | head -1`"
AC_SUBST([H5_VERSION])

dnl Configuration date
AC_SUBST([CONFIG_DATE]) CONFIG_DATE="`date`"

dnl User doing the configuration
AC_SUBST([CONFIG_USER]) CONFIG_USER="`whoami`@`hostname`"
if test -n "$ORGANIZATION"; then
  CONFIG_USER="$CONFIG_USER at $ORGANIZATION"
fi

dnl Configuration mode (production, development, profile, etc) saved above.
AC_SUBST([CONFIG_MODE])

dnl Byte sex from the AC_C_BIGENDIAN macro.
AC_SUBST([BYTESEX])
if test "X$ac_cv_c_bigendian" = "Xyes"; then
  BYTESEX="big-endian"
else
  BYTESEX="little-endian"
fi

dnl Are we compiling static libraries, shared libraries, or both?  This
dnl is only used for the libhdf5.settings file. We can't just look at
dnl $enable_static and $enable_shared because if they're yes the ltconfig
dnl might have decided that one or the other is simply not possible.
dnl Therefore we have to look in the generated `libtool' shell script for
dnl lines that set the value of `build_libtool_libs' (shared) and
dnl `build_old_libs' (static).
AC_SUBST([STATIC_SHARED])
if (grep '^build_libtool_libs=yes' libtool >/dev/null); then
  enable_shared=yes
else
  enable_shared=no
fi

if (grep '^build_old_libs=yes' libtool >/dev/null); then
  enable_static=yes
else
  enable_static=no
fi

if test "X$enable_static" = "Xyes" && test "X$enable_shared" = "Xyes"; then
  STATIC_SHARED="static, shared"
elif test "X$enable_static" = "Xyes"; then
  STATIC_SHARED="static"
elif test "X$enable_shared" = "Xyes"; then
  STATIC_SHARED="shared"
else
  STATIC_SHARED="none"
fi

dnl Parallel support? (set above except empty if none)
PARALLEL=${PARALLEL:-no}

dnl Compiler with version information. This consists of the full path
dnl name of the compiler and the reported version number.
AC_SUBST([CC_VERSION])
if `echo $CC | grep / 2>&1 /dev/null`; then
  CC_VERSION="$CC"	
else
  CC_VERSION="$CC";
  for x in `echo $PATH | sed -e 's/:/ /g'`; do
    if test -x $x/$CC; then
      CC_VERSION="$x/$CC"
      break
    fi
  done
fi
if test -n "$cc_vendor" && test -n "$cc_version"; then
  CC_VERSION="$CC_VERSION ($cc_vendor-$cc_version)"
fi

dnl ----------------------------------------------------------------------
dnl Where is the root of the source tree. Give an absolute address so
dnl we can find it no matter which directory of the distribution is our
dnl current directory. The built-in pwd fails on some systems, but the
dnl /bin/pwd version works OK.
dnl
if test -x /bin/pwd; then
  pwd=/bin/pwd
else
  pwd=pwd
fi
AC_SUBST([ROOT]) ROOT="`$pwd`"

dnl ----------------------------------------------------------------------
dnl Determine the runtime libraries we may need to include in the
dnl libtools command so that executables will find the correct dynamic
dnl libraries.
dnl 
AC_SUBST([DYNAMIC_DIRS]) DYNAMIC_DIRS=""

if test -n "$LDFLAGS"; then
  for d in $LDFLAGS ; do
    case "$d" in
      -L*)
        d="`echo $d | sed -e 's/-L//g'`"
        case "$d" in
          .*)
            dnl If the path isn't absolute, make it so by
            dnl prepending the ROOT directory to it.
            d=${ROOT}/$d
            ;;
        esac
        DYNAMIC_DIRS="-R${d} $DYNAMIC_DIRS"
        ;;
    esac
  done
fi

if test -n "$CPPFLAGS"; then
  TEMP_CPPFLAGS=""
  for d in $CPPFLAGS ; do
    case "$d" in
      -I.*)
        dnl If the path isn't absolute, make it so by prepending
        dnl the ROOT directory to it.
        d="`echo $d | sed -e 's/-I//g'`"
        d="-I${ROOT}/${d}"
        ;;
    esac
    TEMP_CPPFLAGS="$d $TEMP_CPPFLAGS"
  done
  CPPFLAGS=$TEMP_CPPFLAGS
fi

dnl ----------------------------------------------------------------------
dnl Build the Makefiles.  Almost every Makefile.in will begin with the line
dnl `@COMMENCE@' and end with the line `@CONCLUDE@'.  These lines insert
dnl various files from the config directory into the Makefile.
dnl
AC_SUBST_FILE([COMMENCE]) COMMENCE=config/commence
AC_SUBST_FILE([CONCLUDE]) CONCLUDE=config/conclude

dnl The directory search list
AC_SUBST([SEARCH]) SEARCH='$(srcdir) $(top_builddir)/src $(top_srcdir)/src'
cmd='echo $SEARCH |sed "s/ /'$SEARCH_SEP'/g"'
SEARCH="$SEARCH_RULE`eval $cmd`"
export SEARCH

dnl We don't need to say when we're entering directories if we're using
dnl GNU make because make does it for us.
if test "X$GMAKE" = "Xyes"; then
  AC_SUBST([SETX]) SETX=":"
else
  AC_SUBST([SETX]) SETX="set -x"
fi

dnl Some cleanup stuff
rm -f conftest conftest.o conftest.c dummy.o

dnl Build config.status, touch the stamp files, and build all the Makefiles.
dnl The order is such that the first `make' does not need to update any
dnl configuration information. See config/commence.in for the order in which
dnl things need to be done.

# First the stamp1 file for H5config.h.in
mkdir ./config >/dev/null 2>&1
touch ./config/stamp1

# Then the config.status file (but not makefiles)
saved_no_create=$no_create
no_create=yes

PARALLEL_MAKE=""
FORTRAN_PARALLEL_MAKE=""

if test -n "$TESTPARALLEL"; then
  PARALLEL_MAKE="$TESTPARALLEL/Makefile $TESTPARALLEL/testph5.sh"

  if test "X$HDF_FORTRAN" = "Xyes"; then
    FORTRAN_PARALLEL_MAKE=fortran/$TESTPARALLEL/Makefile
  fi
fi

PABLO_MAKE=""

AC_SUBST([PARALLEL_PABLO]) PARALLEL_PABLO=""

if test "X$HAVE_PABLO" = "Xyes"; then
  PABLO_MAKE="pablo/Makefile"

  if test -n "$TESTPARALLEL"; then
    PARALLEL_PABLO="yes"
  fi
fi

if test "X$HDF_FORTRAN" = "Xyes"; then
  FORTRAN_FILES="fortran/Makefile
                 fortran/src/h5fc
                 fortran/src/H5fortran_types.f90
                 fortran/src/libhdf5_fortran.settings
                 fortran/src/Makefile
                 fortran/test/Makefile
                 $FORTRAN_PARALLEL_MAKE
                 fortran/examples/Makefile"
fi

if test "X$HDF_CXX" = "Xyes"; then
  CXX_FILES="c++/Makefile
             c++/src/Makefile
             c++/src/h5c++
             c++/test/Makefile
             c++/examples/Makefile"
fi

AC_CONFIG_FILES([src/libhdf5.settings
                 config/depend1
                 config/depend2
                 config/depend3
                 config/depend4
                 config/dependN
                 config/commence
                 config/conclude
                 Makefile
                 src/Makefile
                 $PABLO_MAKE
                 test/Makefile
                 $PARALLEL_MAKE
                 perform/Makefile
                 tools/Makefile
                 tools/h5dump/Makefile
                 tools/h5import/Makefile
                 tools/h5diff/Makefile
                 tools/h5repack/Makefile
                 tools/h5ls/Makefile
                 tools/lib/Makefile
                 tools/misc/Makefile
                 tools/misc/h5cc
                 tools/gifconv/Makefile
                 examples/Makefile
                 doc/Makefile
                 doc/html/Makefile
                 doc/html/ed_libs/Makefile
                 doc/html/ed_styles/Makefile
                 doc/html/ADGuide/Makefile
                 doc/html/Graphics/Makefile
                 doc/html/Intro/Makefile
                 doc/html/PSandPDF/Makefile
                 doc/html/TechNotes/Makefile
                 doc/html/Tutor/Makefile
                 doc/html/Tutor/Graphics/Makefile
                 doc/html/Tutor/examples/Makefile
                 doc/html/cpplus/Makefile
                 doc/html/fortran/Makefile
                 $FORTRAN_FILES
                 $CXX_FILES])

AC_OUTPUT
no_create=$saved_no_create

# Then the stamp2 file for H5config.h
touch ./config/stamp2

# Finally the makefiles
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1

chmod 755 tools/misc/h5cc

if test "X$HDF_FORTRAN" = "Xyes"; then
  chmod 755 fortran/src/h5fc
fi

if test "X$HDF_CXX" = "Xyes"; then
  chmod 755 c++/src/h5c++
fi

dnl We don't want inline defined for C++ compilers
dnl Don't worry about the C++ ifdef wrappers in the H5pubconf file, since
dnl 'H5_inline' isn't a C++ keyword.
cat >> src/H5config.h <<EOF

#if defined(__cplusplus) && defined(inline)
#undef inline
#endif
EOF

dnl ----------------------------------------------------------------------
dnl Print out a summary of what we are going to build.
dnl
if test -z "$ECHO_N" -o -z "$ECHO_C"; then
  if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
    if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
      ECHO_N=''
      ECHO_C='
'
    else
      ECHO_N=-n
      ECHO_C=''
    fi
  else
    ECHO_N=''
    ECHO_C='\c'
  fi
fi

PRINT_PLAIN() {
  echo $ECHO_N "$1$ECHO_C"
  echo $ECHO_N "$1$ECHO_C" 1>>src/libhdf5.settings
}

PRINT_N() {
  echo $ECHO_N "$1:  $ECHO_C"
  echo $ECHO_N "$1:  $ECHO_C" 1>>src/libhdf5.settings
}

PRINT() {
  echo "$1"
  echo "$1" 1>>src/libhdf5.settings
}

dnl ----------------------------------------------------------------------
dnl Print "Yes" if all arguments are "yes", otherwise "No"
dnl
IF_YES_NO() {
  if test $# -lt 1; then
    PRINT "No"
    return
  else
    while test $# -gt 0; do
      if test "$1" != "yes"; then
        PRINT "No"
        return
      fi
      shift
    done
  fi
  PRINT "Yes"
}

IF_ENABLED_DISABLED() {
  if test "$1" = "yes"; then
    PRINT "Enabled"
  else
    PRINT "Disabled"
  fi
}

PRINT "Configure Summary"
PRINT "Compiling Options:"

PRINT_N "               Compilation Mode"
case "X-$enable_production" in
  X-yes)        PRINT "Production" ;;
  X-no)         PRINT "Development" ;;
  X-profile)    PRINT "Profile" ;;
  *)            PRINT "$enable_production" ;;
esac

PRINT_N "                     C Compiler"
PRINT "$CC"

PRINT_N "                         CFLAGS"
PRINT "$CFLAGS"

PRINT_N "                       CPPFLAGS"
PRINT "$CPPFLAGS"

PRINT_N "                        LDFLAGS"
PRINT "$LDFLAGS"

PRINT_N "                     Debug Mode"

if test "X$DEBUG_PKG" = "X$all_packages"; then
  PRINT "All"
elif test "X$DEBUG_PKG" = "X"; then
  PRINT "None"
else
  PRINT $DEBUG_PKG
fi

PRINT_N "               Shared Libraries"
IF_YES_NO "$enable_shared"

PRINT_N "               Static Libraries"
IF_YES_NO "$enable_static"

PRINT_N "  Statically Linked Executables"
IF_YES_NO "$STATIC_EXEC"

PRINT_N "                        Tracing"
IF_YES_NO "$TRACE_API"

PRINT "Languages:"

PRINT_N "                            C++"
IF_YES_NO "$HDF_CXX"

PRINT_N "                        Fortran"
IF_YES_NO "$HDF_FORTRAN"

PRINT "Features:"

PRINT_N "                        dmalloc"
IF_YES_NO "$HAVE_DMALLOC"

PRINT_N "          Flexible Parallel HDF"
IF_YES_NO "$FPHDF5"

PRINT_N "         Function Stack Tracing"
IF_ENABLED_DISABLED "$FUNCSTACK"

PRINT_N "                           GASS"
IF_YES_NO "$GASS"

PRINT_N "                           GPFS"
IF_YES_NO "$GPFS"

PRINT_N "        HDF5 v1.6 Compatibility"
IF_YES_NO "$HDF5_V1_6_COMPAT"

PRINT_N "                        hsize_t"
case "$HSIZET" in
  no|small)  PRINT "Small" ;;
  *)         PRINT "Large" ;;
esac

PRINT_N "         I/O filters (external)"
PRINT "$EXTERNAL_FILTERS"

PRINT_N "         I/O filters (internal)"
PRINT "$FILTERS"

PRINT_N " Linux Large File Support (LFS)"
IF_ENABLED_DISABLED "$LINUX_LFS"

PRINT_N "                            MPE"
IF_YES_NO "$MPE"

PRINT_N "                          Pablo"
IF_YES_NO "$HAVE_PABLO"

PRINT_N "                  Parallel HDF5"
if test "$PARALLEL" != "no"; then
  PRINT "Yes"
else
  PRINT "No"
fi

PRINT_N "                            SRB"
IF_YES_NO "$SRB"

PRINT_N "                     Stream VFD"
IF_ENABLED_DISABLED "$STREAM_VFD"

PRINT_N "                   Threadsafety"
IF_ENABLED_DISABLED "$THREADSAFE"