path: root/doc/vfd-swmr-user-guide.md

# Welcome to VFD SWMR  

Thank you for volunteering to test VFD SWMR.

SWMR, which stands for Single Writer/Multiple Reader, is a feature
of the HDF5 library that lets a process write data to an HDF5 file
while one or more processes read the file.  Use cases range from
monitoring data collection and/or steering experiments in progress
to financial applications.

The following diagram illustrates the original version of SWMR.

<img src = SWMRdataflow.png width=400 />

The original version of SWMR functions by ordering metadata writes to
the HDF5 file so as to always maintain a consistent view of metadata
in the HDF5 file -- which requires SWMR specific modifications to 
all code that maintains on disk metadata.

VFD SWMR is designed to be a more maintainable and more modular 
replacement for the existing SWMR feature.  It functions by taking 
regular snapshots of HDF5 file metadata on the writer side, and using 
a specialized virtual file driver (VFD) on the reader side to 
intercept metadata read requests and satisfy them from the 
snapshots where appropriate -- thus assuring that the readers 
see a consistent view of HDF5 file metadata,

This design allowed us to implement VFD SWMR with only minor 
modifications to the HDF5 library above metadata cache and page 
buffer.  As a result, not only is VFD SWMR more modular and 
easier to maintain, it is also almost "full SWMR" -- that is it 
allows use of almost all HDF5 capabilities by VFD SWMR writers,
with results that become visible to the VFD SWMR readers.

In particular, VFD SWMR allows the writer to create and delete 
both groups and datasets, and to create and delete attributes on 
both groups and datasets while operating in VFD SWMR mode -- 
which is not possible in the original SWMR.  

We say that VFD SWMR is almost "full SWMR" because there are a 
few limitations -- most notably:

* The current implementation of variable length data in datasets
  is fundamentally incompatible with VFD SWMR, as it stores variable 
  length data as metadata.  This shouldn't be a major issue, as the 
  current implementation of variable length data has very poor performance, 
  and thus is not suitable for most SWMR applications.  A new 
  implementation of variable length data is in the works, and should 
  offer both better performance and be compatible with VFD SWMR.
  However, there is no ETA for delivery.  Variable length attributes 
  on datasets and groups should work, but are currently un-tested.

* At present the Virtual Data Set (VDS) feature is not 
  well integrated with VFD SWMR.  While we have a work around that
  allowed us to test for more fundamental issues (sse below), a proper 
  solution is on hold pending the availability of the original developer.

* VFD SWMR is only tested with, and should only be used with 
  the latest HDF5 file format.  Theoretically, there is no functional
  reason why it will not work with earlier versions of the file format.  
  However, it is possible to construct very large pieces of metadata 
  in early versions of the HDF5 file format, which has the potential to 
  cause major performance issues.

Due to its regular snapshots of metadata, VFD SWMR provides guarantees 
on the maximum time from write to visibility to the readers -- with 
the provisos that the underlying file system is fast enough, that 
the writer makes HDF5 library API calls with sufficient regularity, and 
that both reader and writer avoid long running HDF5 API calls.

For further details on VFD SWMR design and implementation, see 
VFD_SWMR_RFC_200916.pdf or VFD_SWMR_RFC_200916.docx in the 
doc directory.

# Quick start

Follow these instructions to download, configure, and build the
VFD SWMR project in a jiffy.  Then install the HDF5 library and
utilities built by the VFD SWMR project.

## Download

Clone the HDF5 repository in a new directory, then switch to the 
features/vfd_swmr_alpa_1 branch as follows:

```
% git clone https://mainzer@bitbucket.hdfgroup.org/scm/hdffv/hdf5.git swmr
% cd swmr
% git checkout features/vfd_swmr_alpha_1
```

## Build

Create a build directory, change to that directory, and run the
configure script:

```
% mkdir -p ../build/swmr
% cd ../build/swmr
% ../../swmr/configure
```

Build the project:

```
% make
```

## Test

We recommend that you run the full HDF5 test suite to make sure that VFD
SWMR works correctly on your system.  To test the library, utilities, run

```
% make check
```

If the tests don't pass, please let the developers know!

Note that due to reader and writer process drifting out of sync, you 
are likely to see several messages such as:

```
    vfd_swmr_zoo_reader: tend_zoo: vrfy_ns_grp_c: H5Gopen2() failed
```
or 
```
    vfd_swmr_zoo_reader: tend_zoo: H5Lexists unexpectedly true.
```

These are expected transient failues.  In addition, there will be 
expected errors in the variable length data tests until we are able 
to re-implement variable length data storage in HDF5.

# Sample programs

## Extensible datasets

For an example of a program that uses VFD SWMR to write/read many
extensible datasets, have a look at `test/vfd_swmr_bigset_writer.c`, the
"bigset" test.  We compile two binaries from that source file, one that
operates in write mode, and a second that operates in read mode.

In write mode, "bigset" creates an HDF5 file containing one or more
datasets that are extensible in either one dimension or two.  Then it
runs for several steps, increasing the size of each dataset in each
dimension once every step.  The dimensions, number of datasets, the
step increase in dataset size, and the number of steps are configurable
using command-line options -d, -s, -r and -c, and -n, respectively---use
the -h option to get a usage message.  Each dataset is written with a
predictable pattern.

In read mode, "bigset" reads each dataset from an HDF5 file created
by a "bigset" writer and verifies the patterns.  It takes the same
command-line parameters as the "bigset" writer.  The reader and writer
may run concurrently; the reader "polls" the content until it is just
shy of complete, given the number of steps expected.

To run a bigset test, open a couple of terminal windows, one for the
reader and one for the writer.  cd to the `test` directory under
my build directory, and run the writer in one window:

```
% ./vfd_swmr_bigset_writer -n 50 -d 2
```

and in the other window, run the reader:

```
% ./vfd_swmr_bigset_reader -n 50 -d 2 -W
```

The writer will wait for a signal before it quits.  You may tap
Control-C to make it quit.

The reader and writer programs support several command-line options:

* `-h`: show program usage

* `-W`: stop the program from waiting for a signal before it quits.

* `-q`: suppress the progress messages that the programs write to the
  standard error stream.

* `-V`: create a virtual dataset with content in three source datasets
  in the same HDF5 file---only available when the writer creates a
  dataset extensible in one dimension (`-d 1`)

* `-M`: like `-V`, the writer creates the virtual dataset on three
   source datasets, but each source dataset is in a different HDF5 file.

## The VFD SWMR demos

The VFD SWMR demos are in a [separate
repository](https://bitbucket.hdfgroup.org/scm/~dyoung/swmr-demo.git).

Before you build the demos, you will need to install the HDF5 library
and utilities built from the VFD SWMR branch in your home directory
somewhere.  In the ./configure step, use the command-line option
`--prefix=$HOME/path/for/library` to set the directory you prefer.
In the demo Makefiles, update the `H5CC` variable with the path to
the `h5cc` installed from the VFD SWMR branch.  Then you should be
able to `make` and `make clean` the demos.

Under `gaussians/`, two programs are built, `wgaussians` and
`rgaussians`.  If you start both from the same directory in different
terminals, you should see the "bouncing 2-D Gaussian distributions"
in the `rgaussians` terminal.  This demo uses curses, so you may need
to install the curses developers library to build.

The creation-deletion (`credel`) demo is also run in two terminals.
The two command lines are given in `credel/README.md`.  You need
to use the `h5ls` installed from the VFD SWMR branch, since only
that version has the `--poll` option.

# Developer tips

## Configuring VFD SWMR

### File-creation properties

To use VFD SWMR, creating your HDF5 file with paged allocation strategy
is mandatory.  This call enables the paged allocation strategy:

```
ret = H5Pset_file_space_strategy(fcpl, H5F_FSPACE_STRATEGY_PAGE, false, 1);
```

Allocated storage that is smaller than the page size will
not overlap a page boundary, and allocated storage that is one page or
greater in size will start on a page boundary.  VFD SWMR relies on that
allocation strategy.

### File-access properties

In this section we dissect `vfd_swmr_create_fapl()`, a helper routine in
the VFD SWMR tests, to show how to configure your application to use VFD
SWMR.

```
hid_t
vfd_swmr_create_fapl(bool writer, bool only_meta_pages, bool use_vfd_swmr)
{   
    H5F_vfd_swmr_config_t config;
    hid_t fapl;

```

`h5_fileaccess()` is also a helper routine for the tests.  In your
program, you can replace the `h5_fileaccess()` call with a call to
`H5Pcreate(H5P_FILE_ACCESS)`.

```
    /* Create file access property list */
    if((fapl = h5_fileaccess()) < 0) {
        warnx("h5_fileaccess");
        return badhid;
    }
```


VFD SWMR has only been tested with the latest file format.  It may
malfunction with older formats, we just don't know.  We force the
latest version here.

```
    /* FOR NOW: set to use latest format, the "old" parameter is not used */
    if(H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) {
        warnx("H5Pset_libver_bounds");
        return badhid;
    }

    /*
     * Set up to open the file with VFD SWMR configured.
     */
```

VFD SWMR relies on metadata reads and writes to go through the
page buffer.  Note that the default page size is 4096 bytes.  This
call sets the total page buffer size to 4096 bytes.  So we have
effectively created a one-page page buffer!  That is adequate for
testing, but it may not be best for your application.

If `only_meta_pages` is true, then the entire page buffer is
dedicated to metadata.  That's fine for VFD SWMR.

*Note well*: when VFD SWMR is enabled, the meta-/raw-data pages proportion 
set by `H5Pset_page_buffer_size()` does not actually control the
pages reserved for raw data.  *All* pages are dedicated to buffering
metadata.


```
    /* Enable page buffering */
    if(H5Pset_page_buffer_size(fapl, 4096, only_meta_pages ? 100 : 0, 0) < 0) {
        warnx("H5Pset_page_buffer_size");
        return badhid;
    }
```


Add VFD SWMR-specific configuration to the file-access property list
(`fapl`) using an `H5Pset_vfd_swmr_config()` call.

When VFD SWMR is enabled, changes to the HDF5 metadata accumulate in
RAM until a configurable unit of time known as a *tick* has passed.
At the end of each tick, a snapshot of the metadata at the end of
the tick is "published"---that is, made visible to the readers.

The length of a *tick* is configurable in units of 100 milliseconds
using the `tick_len` parameter.  Below, `tick_len` is set to `4` to
select a tick length of 400ms.

A snapshot does not persist forever, but it expires after a number
of ticks, given by the *maximum lag*, has passed.  Below, `max_lag`
is set to `7` to select a maximum lag of 7 ticks.  After a snapshot
has expired, the writer may overwrite it.

When a reader first enters the API, it starts to use, or "selects,"
the metadata in the newest snapshot, and on every subsequent API
entry, if a tick has passed since the last selection, and if new
snapshots are available, then the reader selects the latest.

If a reader spends longer than `max_lag - 1` ticks (2400ms with
the example configuration) inside the HDF5 API, then its snapshot
may expire, resulting in undefined behavior.  When a snapshot
expires while the reader is using it, we say that the writer has
"overrun" the reader.  The writer cannot detect overruns.
Frequently the reader will detect an overrun and force the program
to exit with a diagnostic assertion failure.

The application tells VFD SWMR whether or not to configure for
reading or writing a file by setting the `writer` parameter to
`true` for writing or `false` for reading.

VFD SWMR snapshots are stored in a "metadata file" that is shared
between writer and readers.  On a POSIX system, the metadata file
may be placed on any *local* filesystem that the reader and writer
share.  The `md_file_path` parameter tells where to put the metadata
file.

The `md_pages_reserved` parameter tells how many pages to reserve
at the beginning of the metadata file for the metadata-file header
and the metadata index.  The header has an entire page to itself.
The remaining `md_pages_reserved - 1` pages are reserved for the
metadata index.  If the index grows larger than its initial
allocation, then it will move to a new location in the metadata file,
and the initial allocation will be reclaimed.  `md_pages_reserved`
must be at least 2.

The `version` parameter tells what version of VFD SWMR configuration
the parameter struct `config` contains.  For now, it should be
initialized to `H5F__CURR_VFD_SWMR_CONFIG_VERSION`.

```
    memset(&config, 0, sizeof(config));

    config.version = H5F__CURR_VFD_SWMR_CONFIG_VERSION;
    config.tick_len = 4;
    config.max_lag = 7;
    config.writer = writer;
    config.md_pages_reserved = 128;
    HDstrcpy(config.md_file_path, "./my_md_file");

    /* Enable VFD SWMR configuration */
    if(use_vfd_swmr && H5Pset_vfd_swmr_config(fapl, &config) < 0) {
        warnx("H5Pset_vfd_swmr_config");
        return badhid;
    }
    return fapl;
}
```

## Using virtual datasets (VDS)

An application may want to use VFD SWMR to create, read, or write
a virtual dataset.  Unfortunately, VDS does not work properly with
VFD SWMR at this time.  In this section, we describe some workarounds
that can be used with great care to make VDS and VFD SWMR cooperate.

A virtual dataset, when it is read or written, will open files on
an application's behalf in order to access the source datasets
inside.  If a virtual dataset resides on file `v.h5`, and one of
its source datasets resides on a second file, `s1.h5`, then the
virtual dataset will try to open `s1.h5` using the same file-access
properties as `v.h5`.  Thus, if `v.h5` is open with VFD SWMR with
metadata file `v.shadow`, then the virtual dataset will try to open
`s1.h5` with the same metadata file, which will fail.

Suppose that `v.h5` is *not* open with VFD SWMR, but it was opened
with default file-access properties.  Then the virtual dataset will
open the source dataset on `s1.h5` with default file-access
properties, too.  This default virtual-dataset behavior is not
helpful to the application that wants to use VFD SWMR to read or
write source datasets.

To use VFD SWMR with VDS, an application should *pre-open* each file
using its preferred file-access properties, including independent metadata
filenames for each source file.  As long as the virtual dataset remains
in use, the application should leave each of the pre-opened files open.
In this way the library, when it tries to open the source files, will
always find them already open and re-use the already-open files with the
file-access properties established on first open.

## Pushing HDF5 raw data to reader visibility

At present, VFD SWMR is hard coded to flush raw data at the end of 
each tick.  While this imposes additional overhead, it simplifies testing, 
and is probably desirable for applications that do not require the best
possible raw data throughput.  We plan to upgrade our tests and make this 
user configurable in the first production release.

With the currently hard coded flush of raw data at the end of each tick, 
it should not be necessary to call H5Fflush().  In fact, when VFD SWMR is 
active, H5Fflush() may require up to 'max_lag' ticks to complete due to 
metadata consistency issues.

Instead, a writer can make its last changes to HDF5 file visible to all
readers immediately using the new call, `H5Fvfd_swmr_end_tick()`.  Note
that this call should be used sparingly, as it terminates the current 
tick early, thus effectively reducing 'max_lag'.  Repeated calls in 
quick succession can force a reader to overrun 'max_lag', and 
read stale metadata.

When the flush of raw data at end of tick is disabled (not possible at present), 
the `H5Fvfd_swmr_end_tick()` call will make the writers current view of metadata
visible to the reader -- which may refer to raw data that hasn't been written to 
the HDF5 file yet.

## Reading up-to-date content

One expected use case for VFD SWMR involves an experiment in which instruments 
continuously generate 2-dimensional data frames.  These data frames are recorded 
in datasets in a HDF5 file that has been opened in VFD SWMR writer mode.  In this 
use case, the HDF5 file is opened in VFD SWMR reader mode by a second program 
that generates a real time display of the data as it is being collected -- thus 
allowing the experimenters to steer the experiment.

THG developed a demonstration program for class of application,
and we have some advice based on that experience. 

The writer typically will increase a dataset's dimensions by a
frame, using `H5Dset_extent()`, before it writes the data of that
frame with `H5Dwrite()`.  It's possible that a snapshot of the HDF5
file will propagate to the reader between the `H5Dset_extent()`
call and the `H5Dwrite()`.  Values `H5Dread()` from the last frame
at that juncture will not reflect the actual experimental data.
Instead, the reader will see arbitrary values or the fill value.
To display those values would be distracting and misleading to
the experimenter. 

On the reader, a strategy for displaying the most current, bonafide application
data is to read the dimensions of the frames dataset, `d`, compute
the number `n` of full frames contained in `d`, and read the
next-to-last frame, `n - 2`.  THG uses a variant of this strategy
in its `gaussians` demo.

On the writer, a strategy for protecting against snapshots between
the `H5Dset_extent()` and `H5Dwrite()` calls is to suspend VFD
SWMR's clock across both of the calls.  The
`H5Fvfd_swmr_disable_end_of_tick()` call takes a file identifier
and stops new snapshots from being taken on the given file until
`H5Fvfd_swmr_enable_end_of_tick()` is called on the same file.
Needless to say, end of tick processing should only be disabled
briefly.

# Known issues

## Variable-length data

A VFD SWMR reader cannot reliably read back a variable-length dataset
written by VFD SWMR.  For example, a variable-length string
created and written as follows

```
    hid_t dset, space, type;
    char data[] = "content";

    type = H5Tcopy(H5T_C_S1);

    H5Tset_size(type, H5T_VARIABLE);

    space = H5Screate(H5S_SCALAR);

    dset = H5Dcreate2(..., "string", type, space, H5P_DEFAULT, H5P_DEFAULT,
        H5P_DEFAULT);

    H5Dwrite(dset, type, space, space, H5P_DEFAULT, &data);
```

and read back like this,

```
    char *data;
    herr_t ret;

    ret = H5Dread(..., ..., H5S_ALL, H5S_ALL, H5P_DEFAULT, &data);
```

may produce either an error return from `H5Dread` (`ret < 0`) or
a `NULL` pointer (`data == NULL`).

As discussed above, this is caused by a fundamental incompatibility 
between the current variable length data implementation in HDF5, which 
stores variable length data as metadata.  It is possible we may be able 
to mitigate the issue, but the most likely solution is the planned 
re-implementation of variable length data that is currently in the planning
stage.  Unfortunately, we have no ETA for this re-implementation.

## Iteration

An application that reads in VFD SWMR mode should take care to avoid
HDF5 iteration APIs, especially when iterating large numbers of objects
or using long-running application callbacks.  While the library is in an
iteration routine, it cannot track changes made by the writer.  If the
library spends more than `max_lag` ticks in the routine, then its view
of the HDF5 file will become stale.  Under those circumstances, HDF5
content could be mis-read, or the library could crash with a diagnostic
assertion.

## Object handles

At the present level of development, the writer cannot invalidate
a reader's HDF5 object handles (`hid_t`s).  If a reader holds an
object open---that is, it has a valid handle (`hid_t`) for the
object---while the writer deletes it, then reading content through
the handle may yield corrupted data or the data from some other
object, or the library may crash.

## Microsoft Windows 

VFD SWMR is not officially supported on Microsoft Windows at this time.  The
feature should in theory work on Windows and NTFS, however it has not been
tested as the existing VFD SWMR tests rely on shell scripts.  Note that Windows
file shares are not supported as there is no write ordering guarantee (as with
NFS, et al.).

## Supported filesystems

A VFD SWMR writer and readers share a couple of files, the HDF5 (`.h5`)
file and the metadata file -- which is used to communicate snapshots of 
the HDF5 file metadata from the writer to the readers.  VFD SWMR relies 
on writes to the metadata file to take effect in the order described in 
the POSIX documentation for `read(2)` and `write(2)` system calls.  If 
the VFD SWMR readers and the writer run on the same POSIX host, this 
ordering should take effect, regardless of the underlying filesystem. 

If the VFD SWMR reader and the writer run on *different* hosts, then
the write-ordering rules depend on the shared filesystem.  VFD SWMR is
not generally expected to work with NFS at this time.  GPFS is reputed
to order writes according to POSIX convention, so we expect VFD SWMR
to work with GPFS.  (Caveat: we are still looking for an authoritative
description of GPFS I/O semantics.)

The HDF Group plans to add support for NFS to VFD SWMR in the future.

## File-opening order

If an application tries to open a file in VFD SWMR reader mode, and the
file is not already open by a VFD SWMR writer, then the application will
sleep in the `H5Fopen()` call until either the writer opens the same
file (using the same shadow file) or the reader times out after several
seconds.

# Reporting bugs

VFD SWMR is still under development, so we expect that you will encounter 
bugs.  Please report them, along with any performance or design issues you 
encounter.

To contact the VFD SWMR developers, email vfdswmr@hdfgroup.org.