path: root/doxygen/dox/VOLConnGuide.dox

/** \page VOL_Connector HDF5 Virtual Object Layer (VOL) Connector Author Guide

Navigate back: \ref index "Main"
<hr>

\section secVOLIntro Introduction
The Virtual Object Layer (VOL) is an abstraction layer in the HDF5 library which intercepts all API
calls that could potentially access objects in an HDF5 container and forwards those calls to object drivers
referred to as <em>VOL connectors</em>. The architecture of this feature is described in the \ref H5VL_UG
and VOL Architecture and Internals Documentation and will not be duplicated here.

This guide is for people who are interested in developing their own VOL connector for the HDF5 library.
It is assumed that the reader has good knowledge of the VOL architecture obtained by reading the VOL
architectural design document.

\section secVOLCreate Creating a New Connector

\subsection subsecVOLOverview Overview
Creating a new VOL connector can be a complicated process. You will need to map your storage system
to the HDF5 data model through the lens of the VOL and this may involve some impedance mismatch that
you will have to work around. The good news is that the HDF5 library has been re-engineered to handle
arbitrary, connector-specific data structures via the VOL callbacks, so no knowledge of the library internals
is necessary to write a VOL connector.

Writing a VOL connector requires these things:
\li Decide on library vs plugin vs internal.
\li Set up your build/test files (CMake, Autotools, etc.).
\li Fill in some boilerplate information in yourH5VLclasststruct.
\li Decide how you will perform any necessary initialization needed by your storage system.
\li Map Storage to HDF5 File Objects
\li Create implementations for the callbacks you need to support.
\li Test the connector.

Each of the steps listed above is described in more detail in this section of the document.

The "model then implement" steps can be performed iteratively. You might begin by only supporting files,
datasets, and groups and only allowing basic operations on them. In some cases, this may be all that is
needed. As your needs grow, you can repeat those steps and increase the connector's HDF5 API coverage
at a pace that makes sense for your users.

Also, note that this document only covers writing VOL connectors using the C programming language. It
is often possible to write connectors in other programming languages (e.g.;  Python) via the language's C
interop facilities, but that topic is out of scope for this document.

\subsection subsecVOL112dep The HDF5 1.12.x VOL Interface Is DEPRECATED
Important changes were made to the VOL interface for HDF5 1.13.0 and, due to binary compatibility issues,
these cannot be merged to HDF5 1.12.x. For this reason, VOL connector development should be shifted to
target 1.13.0 as no further development of the VOL interface will take place on the 1.12.x branch. Unlike the
other development branches of the library, there is no hdf5_1_13 branch - all HDF5 1.13.0 development is
taking place in the develop branch of the HDF5 repository and 1.13.x branches will split off from that.

Note also that HDF5 1.13.0 is considered an unstable branch, and the API and file format are subject to
change ("unstable" means "not yet finalized", not "buggy"). The VOL feature is under active development
and, although it is nearing its final form, may change further before the stable HDF5 1.14.0 release targeted
for 2022.

\subsection subsecVOLRelated VOL-Related HDF5 Header Files
Use of the VOL, including topics such as registration and loading VOL plugins, is described in the \ref H5VL_UG.

Public header Files you will need to be familiar with include:
<table>
<tr>
<td>H5VLpublic.h
</td>
<td>Public VOL header.
</td>
</tr>
<tr>
<td>H5VLconnector.h
</td>
<td>Main header for connector authors. Contains definitions for the main VOL struct and callbacks, enum values, etc.
</td>
</tr>
<tr>
<td>H5VLconnector_passthru.h
</td>
<td>Helper routines for passthrough connector authors.
</td>
</tr>
<tr>
<td>H5VLnative.h
</td>
<td>Native VOL connector header. May be useful if your connector will attempt to implement native HDF5 API calls that are handled via the optional callbacks.
</td>
</tr>
<tr>
<td>H5PLextern.h
</td>
<td>Needed if your connector will be built as a plugin.
</td>
</tr>
</table>

Many VOL connectors are listed on The HDF Group's VOL plugin registration page, located at:
<a href="https://portal.hdfgroup.org/display/support/Registered+VOL+Connectors">Registered VOL Connectors</a>.
Not all of these VOL connectors are supported by The HDF Group and the level of completeness varies, but the
connectors found there can serve as examples of working implementations

\subsection subsecVOLLPI Library vs Plugin vs Internal
When building a VOL connector, you have several options:

<h4>Library</h4>
The connector can be built as a normal shared or static library. Software that uses your connector will have
to link to it just like any other library. This can be convenient since you don't have to deal with plugin paths
and searching for the connector at runtime, but it also means that software which uses your connector will
have to be built and linked against it.

<h4>Plugin</h4>
You can also build your connector as a dynamically loaded plugin. The mechanism for this is the same
mechanism used to dynamically load HDF5 filter plugins. This can allow use of your connector via the
VOL environment variable, without modifying the application, but requires your plugin to be discoverable
at runtime. See the \ref H5VL_UG for more information about using HDF5 plugins.

To build your connector as a plugin, you will have to include <b>H5PLextern.h</b>
(a public header distributed with  the  library) and  implement the #H5PLget_plugin_type
#H5PLget_plugin_info calls, both of which are trivial to code up. It also often requires your connector
to be built with certain compile/link options. The VOL connector template does all of these things.

The HDF5 library's plugin loading code will call #H5PLget_plugin_type
to determine the type of plugin(e.g.; filter, VOL) and #H5PLget_plugin_info
to get the class struct, which allows the library to query the plugin for its name and value to see if it has found
a requested plugin. When a match is found, the library will use the class struct to register the connector and map its callbacks.

For the HDF5 library to be able to load an external plugin dynamically, the plugin developer has to define
two public routines with the following name and signature:
\code
  H5PL_type_t H5PLget_plugin_type(void);
  const void *H5PLget_plugin_info(void);
\endcode

To show how easy this is to accomplish, here is the complete implementation of those functions in the
template VOL connector:
\code
H5PL_type_t H5PLget_plugin_type(void) { return H5PL_TYPE_VOL; }
const void *H5PLget_plugin_info(void) { return &template_class_g; }
\endcode

\ref H5PLget_plugin_type should return the library type which should always be #H5PL_TYPE_VOL.
#H5PLget_plugin_info should return a pointer to the plugin structure defining the VOL plugin with all the callbacks.
For example, consider an external plugin defined as:
\code
  static const H5VL_class_t H5VL_foo_g = {
      2,     // version
      12345, // value
      "foo", // name
      ...
  }
\endcode

The plugin would implement the two routines as:
\code
  H5PL_type_t H5PLget_plugin_type(void)
      {return H5PL_TYPE_VOL;}
  const void *H5PLget_plugin_info(void)
      {return &H5VL_foo_g;}
\endcode

<h4>Internal</h4>
Your VOL connector can also be constructed as a part of the HDF5 library. This works in the same way
as the stdio and multi virtual file drivers (VFDs) and does not require knowledge of HDF5 internals or
use of non-public API calls. You simply have to add your connector's files to the
Makefile.am and/or CMakeLists.txt files in the source distribution's src directory. This requires maintaining
a private build of the library, though, and is not recommended.

\subsection subsecVOLBuild Build Files / VOL Template
We have created a template terminal VOL connector that includes both Autotools and CMake build files. The
constructed VOL connector includes no real functionality, but can be registered and loaded as a plugin.

The VOL template can be found here:
<a href="https://github.com/HDFGroup/vol-template">VOL template</a>

The purpose of this template is to quickly get you to the point where you can begin filling in the callback
functions and writing tests. You can copy this code to your own repository to serve as the basis for your
new connector.

A template passthrough VOL is also available. This will be discussed in the section on passthrough connectors.

\subsection subsecVOLBoil H5VL_class_t Boilerplate
Several fields in the H5VLclasststruct will need to be filled in.

In HDF5 1.13.0, the <em>version</em> field will be 2, indicating the connector targets version 2 of the
#H5VL_class_t struct.  Version 1 of the struct was never formally released and only available in the
develop branch of the HDF5 git repository. Version 0 is used in the deprecated HDF5 1.12.x branch.

Every connector needs a <em>name</em> and <em>value</em>. The library will use these when loading and registering the
connector (as described in the \ref H5VL_UG), so they should be unique in your ecosystem.

VOL connector values are integers, with a maximum value of 65535. Values from 0 to 255 are reserved
for internal use by The HDF Group. The native VOL connector has a value of 0. Values of 256 to 511
are for connector testing and should not be found in the wild. Values of 512 to 65535 are for external
connectors.

As is the case with HDF5 filters, The HDF Group can assign you an official VOL connector value. Please
contact <a href="help@hdfgroup.org">help@hdfgroup.org</a> for help with this. We currently do not register connector names, though the
name you've chosen will appear on the registered VOL connectors page.

As noted above, registered VOL connectors will be listed at:
<a href="https://portal.hdfgroup.org/display/support/Registered+VOL+Connectors">Registered VOL Connectors</a>

A new \b conn_version field has been added to the class struct for 1.13. This field is currently not used by
the library so its use is determined by the connector author. Best practices for this field will be determined
in the near future and this part of the guide will be updated.

The \b cap_flags field is used to determine the capabilities of the VOL connector. At this time, the use of this
field is limited to indicating thread-safety, asynchronous capabilities, and ability to produce native HDF5
files. Supported flags can be found in \ref H5VLconnector.h.
\code
// Capability flags for connector
#define H5VL_CAP_FLAG_NONE     0        // No special connector capabilities
#define H5VL_CAP_FLAG_THREADSAFE 0x01   // Connector is threadsafe
#define H5VL_CAP_FLAG_ASYNC    0x02     // Connector performs operations asynchronously
#define H5VL_CAP_FLAG_NATIVE_FILES 0x04 // Connector produces native file format
\endcode

\subsection subsecVOLInit Initialization and Shutdown
You'll need to decide how to perform any initialization and shutdown tasks that are required by your
connector. There are initialize and terminate callbacks in the #H5VL_class_t struct to handle this. They
are invoked when the connector is registered and unregistered, respectively. The initialize callback can take
a VOL initialization property list, so any properties you need for initialization can be applied to it. The
HDF5 library currently makes no use of the vipl so there are no default vipl properties.

If this is unsuitable, you may have to create custom connector-specific API calls to handle initialization and
termination. It may also be useful to perform operations in a custom API call used to set the VOL connector
in the fapl.

The initialization and terminate callbacks:
\code
  herr_t (*initialize)(hid_t vipl_id); // Connector initialization callback
  herr_t (*terminate)(void);           // Connector termination callback
\endcode

\subsection subsecVOLMap Map Storage to HDF5 File Objects
The most difficult part of designing a new VOL connector is going to determining how to support HDF5
file objects and operations using your storage system. There isn't much specific advice to give here, as each
connector will have unique needs, but a forthcoming "tutorial" connector will set up a simple connector and
demonstrate this process.

\subsection subsecVOLFillIn Fill In VOL Callbacks
For each file object you support in your connector (including the file itself), you will need to create a
data struct to hold whatever file object metadata that are needed by your connector. For example, a data
structure for a VOL connector based on text files might have a file struct that contains a file pointer for the
text file, buffers used for caching data, etc. Pointers to these data structures are where your connector's
state is stored and are returned to the HDF5 library from the create/open/etc. callbacks such as
<em>dataset create</em>.

Once you have your data structures, you'll need to create your own implementations of the callback functions
and map them via your #H5VL_class_t struct.

\subsection subsecVOLOpt Handling Optional Operations
Handling optional operations has changed significantly in HDF5 1.13.0. In the past, optional operations were
specified using an integer <em>opt_type</em> parameter. This proved to be a problem with pass-through connectors,
though, as it was possible to have <em>opt_type</em> clash if two connectors used the same <em>opt_type</em> values.

The new scheme allows a connector to register an optional operation with the library and receive a dynamically-allocated
<em>opt_type</em> value for the operation.

The following API calls can be used to manage the optional operations:
\code
  herr_t H5VLregister_opt_operation(H5VL_subclass_t subcls, const char *op_name, int *op_val);
  herr_t H5VLfind_opt_operation(H5VL_subclass_t subcls, const char *op_name, int *op_val);
  herr_t H5VLunregister_opt_operation(H5VL_subclass_t subcls, const char *op_name)
\endcode

The <em>register</em> call is used to register an operation for a subclass (file, etc.) and the <em>opt_type</em> parameter
that the library assigned to the operation will be returned via the <em>opt_val</em> parameter. This value can then
be passed to one of the subclass-specific API calls (listed below). If you need to find an existing optional
call's assigned <em>opt_type</em> value by name, you can use the <em>find</em> call.

One recommended way to handle optional calls is to <em>register</em> all the optional calls at startup, saving the
values in connector state, then use these cached values in your optional calls. The assigned values should be
unregistered using the <em>unregister</em> call when the connector shuts down.

Subclass-specific optional calls:
\code
herr_t H5VLattr_optional_op(const char *app_file, const char *app_func, unsigned app_line,
                            hid_t attr_id, H5VL_optional_args_t *args, hid_t dxpl_id, hid_t es_id);
herr_t H5VLdataset_optional_op(const char *app_file, const char *app_func, unsigned app_line,
                            hid_t dset_id, H5VL_optional_args_t *args, hid_t dxpl_id, hid_t es_id);
herr_t H5VLdatatype_optional_op(const char *app_file, const char *app_func, unsigned app_line,
                            hid_t type_id, H5VL_optional_args_t *args, hid_t dxpl_id, hid_tes_id);
herr_t H5VLfile_optional_op(const char *app_file, const char *app_func, unsigned app_line,
                            hid_t file_id, H5VL_optional_args_t *args, hid_t dxpl_id, hid_t es_id);
herr_t H5VLgroup_optional_op(const char *app_file, const char *app_func, unsigned app_line,
                            hid_t group_id, H5VL_optional_args_t *args, hid_t dxpl_id, hid_t es_id);
herr_t H5VLlink_optional_op(const char *app_file, const char *app_func, unsigned app_line,
                            hid_t loc_id, const char *name, hid_t lapl_id, H5VL_optional_args_t *args,
                            hid_t dxpl_id, hid_t es_id);
herr_t H5VLobject_optional_op(const char *app_file, const char *app_func, unsigned app_line,
                            hid_t loc_id, const char *name, hid_t lapl_id,
                            H5VL_optional_args_t *args, hid_t dxpl_id, hid_t es_id);
herr_t H5VLrequest_optional_op(void *req, hid_t connector_id, H5VL_optional_args_t *args);
\endcode

\subsection subsecVOLTest Testing Your Connector
At the time of writing, some of the HDF5 library tests have been abstracted out of the library with their
native-file-format-only sections removed and added to a VOL test suite available here:
<a href="https://github.com/HDFGroup/vol-tests">vol-tests</a>

This is an evolving set of tests, so see the documentation in that repository for instructions as to its use.
You may want to clone and modify and/or extend these tests for use with your own connector.

In the future, we plan to modify the HDF5 test suite that ships with the library to use a future VOL
capabilities flags scheme to selectively run tests that a particular connector supports. As this is a large task,
it may be some time before that work is complete.

\subsection subsecVOLPassthrough Passthrough Connectors
Coming Soon

\subsection subsecVOLAsync Asynchronous Operations
Coming Soon

\section secVOLRef VOL Connector Interface Reference
Each VOL connector should be of type #H5VL_class_t:
<table>
<tr>
<td>
<em>VOL connector class, H5VLpublic.h</em>
\snippet H5VLconnector.h H5VL_class_t_snip
</td>
</tr>
</table>

The <em>version</em> field is the version of the #H5VL_class_t struct. This is identical to how the <em>version</em> field is
used in the #H5Z_class2_t struct for filters.

The <em>value</em> field is a unique integer identifier that should be between 512 and 65535 for external, non-library
connectors.

The <em>name</em> field is a string that uniquely identifies the VOL connector name.

The <em>conn_version</em> is the connector version. This is currently not used by the library.

The <em>cap_flags</em> holds bitwise capability/feature flags that determine which operations and capabilities are
supported by a the VOL connector. These fields were enumerated in the previous section.

The <em>initialize</em> field is a function pointer to a routine that a connector implements to set up or initialize
access to the connector. Implementing this function by the connector is not required since some connectors
do not require any set up to start accessing the connector. In that case, the value of the function pointer
should be set to NULL. Connector specific variables that are required to be passed from users should be
passed through the VOL initialize property list. Generic properties can be added to this property class
for user-defined connectors that cannot modify the HDF5 library to add internal properties. For more
information consult the property list reference manual pages.

The <em>terminate</em> field is a function pointer to a routine that a connector implements to terminate or finalize
access to the connector. Implementing this function by the connector is not required since some connectors
do not require any termination phase to the connector. In that case, the value of the function pointer should
be set to NULL.

The rest of the fields in the #H5VL_class_t struct are "subclasses" that define all the VOL function callbacks
that are mapped to from the HDF5 API layer. Those subclasses are categorized into three categories, VOL
Framework, Data Model, and Infrastructure / Services.

VOL Framework classes provide functionality for working with the VOL connectors themselves (e.g., working
with connector strings) and with wrapping and unwrapping objects for passthrough connectors.

Data Model classes are those that provide functionality for accessing an HDF5 container and objects in that
container as defined by the HDF5 data model.

Infrastructure / Service classes are those that provide services for users that are not related to the data model
specifically. Asynchronous operations, for example, are a service that most connectors can implement, so we
add a class for it in the VOL structure.

If a service becomes generic enough and common among many connectors, a class for it should be added
to the VOL structure. However, many connectors can/will provide services that are not shared by other
connectors. A good way to support these services is through an optional callback in the VOL structure which
can be a hook from the API to the connector that provides those services, passing any necessary arguments
needed without the HDF5 library having to worry about supporting that service. A similar API operation
to allow users to use that service will be added. This API call would be similar to an "ioctl" call where any
kind of operation can be supported and passed down to the connector that has enough knowledge from the
user to interpret the type of the operation. All classes and their defined callbacks will be detailed in the
following sub-sections.

To handle that large set of API routines, each class in the Data Model category has three generic callbacks,
<em>get</em>, <em>specific</em>, and <em>optional</em> to handle the three set of API operations outline above respectively. To
handle the varying parameters that can be passed to the callback, each callback will take a struct parameter
that includes an enum <em>get/specific</em> or integer <em>optional</em> field indicating the operation and a union of the
possible parameters <em>get/specific</em> or void pointer to the parameters <em>optional</em>.

The optional args struct used for all optional operations:
\code
// Struct for all 'optional' callbacks
typedef struct H5VL_optional_args_t {
  int  op_type; // Operation to perform
  void *args;   // Pointer to operation's argument struct
} H5VL_optional_args_t;
\endcode

The <em>opt_type</em> member is the value assigned by the library when the optional operation was registered (or
<em>defined</em> in the case of the native VOL connector) and the <em>args</em> member is a pointer to the optional
operation's parameters (usually passed in as a struct).

Note that this differs from the HDF5 1.12.x scheme, which used <em>va_lists</em>.

The <em>optional</em> callback is a free for all callback where anything from the API layer is passed in directly.
This callback is used to support connector specific operations in the API that other connectors should or
would not know about. More information about types and the arguments for each type will be detailed in
the corresponding class arguments.

\subsection subsecVOLRefMap Mapping the API to the Callbacks
The callback interface defined for the VOL has to be general enough to handle all the HDF5 API operations
that would access the file. Furthermore, it has to capture future additions to the HDF5 library with little to
no changes to the callback interface. Changing the interface often whenever new features are added would
be discouraging to connector developers since that would mean reworking their VOL connector structure.
To remedy this issue, every callback will contain two parameters:
<ul>
<li>A data transfer property list (DXPL) which allows that API to put some properties on for the connectors
to retrieve if they have to for particular operations, without having to add arguments to the VOL
callback function.</li>
<li>A pointer to a request <em>(void **req)</em> to handle asynchronous operations if the HDF5 library adds
support for them in future releases. hat pointer is set by the VOL connector to a request object it
creates to manage progress on that asynchronous operation. If the <em>req</em> is <em>NULL</em>, that means that the
API operation is blocking and so the connector would not execute the operation asynchronously. If
the connector does not support asynchronous operations, it needs not to worry about this field and
leaves it unset.</li>
</ul>

In order to keep the number of the VOL object classes and callbacks concise and readable, it was decided
not to have a one-to-one mapping between API operation and callbacks. The parameter names and types
will be detailed when describing each callback in their respective sections.

The HDF5 library provides several routines to access an object in the container.  For example, to open an
attribute on a group object, the user could use #H5Aopen and pass the group identifier directly where the
attribute needs to be opened. Alternatively, the user could use #H5Aopen_by_name or #H5Aopen_by_idx
to open the attribute, which provides a more flexible way of locating the attribute, whether by a starting
object location and a path or an index type and traversal order. All those types of accesses usually map to
one VOL callback with a parameter that indicates the access type. In the example of opening an attribute,
the three API open routine will map to the same VOL open callback but with a different location parameter.
The same applies to all types of routines that have multiple types of accesses. The location parameter is a
structure defined in:

<em>Structure to hold parameters for object locations, H5VLconnector.h</em>
\code
//
// Structure to hold parameters for object locations.
// either: BY_SELF, BY_NAME, BY_IDX, BY_TOKEN

typedef struct H5VL_loc_params_t {
  H5I_type_t obj_type;  // The object type of the location object
  H5VL_loc_type_t type; // The location type
  union { // parameters of the location
    H5VL_loc_by_token_t   loc_by_token;
    H5VL_loc_by_name_t    loc_by_name;
    H5VL_loc_by_idx_t     loc_by_idx;
    }loc_data;
  } H5VL_loc_params_t

//
// Types for different ways that objects are located in an
// HDF5 container.
typedef enum H5VL_loc_type_t {
  // starting location is the target object
  H5VL_OBJECT_BY_SELF,

  // location defined by object and path in H5VL_loc_by_name_t
  H5VL_OBJECT_BY_NAME,

  // location defined by object, path, and index in H5VL_loc_by_idx_t
  H5VL_OBJECT_BY_IDX,
  
  // location defined by token (e.g. physical address) in H5VL_loc_by_token_t
  H5VL_OBJECT_BY_TOKEN,
} H5VL_loc_type_t;

typedef struct H5VL_loc_by_name {
  const char *name; // The path relative to the starting location
  hid_t lapl_id;    // The link access property list
}H5VL_loc_by_name_t;

typedef struct H5VL_loc_by_idx {
  const char *name;      // The path relative to the starting location
  H5_index_t idx_type;   // Type of index
  H5_iter_order_t order; // Index traversal order
  hsize_t n;             // Position in index
  hid_t lapl_id;         // The link access property list
}H5VL_loc_by_idx_t;

typedef struct H5VL_loc_by_token {
  void *token; // arbitrary token (physical address of location in native VOL)
}H5VL_loc_by_token_t;
\endcode

\subsection subsecVOLRefConn Connector Information Callbacks
This section's callbacks involve the connector-specific information that will be associated with the VOL in
the fapl via <b>H5Pset_fapl_<name></b> et al. This data is copied into the fapl so the library needs these functions to
manage this in a way that prevents resource leaks.

The <em>to_str</em> and <em>from_str</em> callbacks are used to convert the connector-specific data to and from a configuration
string. There is no official way to construct VOL configuration strings, so the format used (JSON,
XML, getopt-style processing, etc.) is up to the connector author. These connector configuration strings
can be used to set up a VOL connector via mechanisms like command-line parameters and environment
variables.

<em>Info class for connector information routines, H5VLconnector.h</em>
\code
// VOL connector info fields & callbacks 
typedef struct H5VL_info_class_t {
    size_t size;                     // Size of the VOL info
    void *(*copy)(const void *info); // Callback to create a copy of the VOL info
    herr_t (*cmp)(int *cmp_value, const void *info1, const void *info2); // Callback to compare VOL info
    herr_t (*free)(void *info);                       // Callback to release a VOL info
    herr_t (*to_str)(const void *info, char **str);   // Callback to serialize connector's info into a string
    herr_t (*from_str)(const char *str, void **info); // Callback to deserialize a string into connector's info
} H5VL_info_class_t;
\endcode

\subsubsection subsubsecVOLRefConnsize info: size
The <em>size</em> field indicates the size required to store any special information that the connector needs.

If the connector requires no special information, set this field to zero.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  size_t size;
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefConncopy info: copy
The <em>copy</em> callback is invoked when the connector is selected for use with <b>H5Pset_fapl_<name></b>, the
connector-specific set call, etc. Where possible, the information should be deep copied in such a way that the original
data can be freed.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void * (*copy)(const void *info);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  info  (IN): The connector-specific info to copy.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefConncmp info: cmp
The <em>cmp</em> callback is used to determine if two connector-specific data structs are identical and helps the library
manage connector resources.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*cmp)(int *cmp_value, const void *info1, const void *info2);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  cmp_value  (OUT): A strcmp-like compare value.
  info1      (IN):  The 1st connector-specific info to copy.
  info2      (IN):  The 2nd connector-specific info to copy.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefConnfree info: free
The <em>free</em> callback is used to clean up the connector-specific information that was copied when set in the
fapl via the <em>copy</em> callback.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*free)(void *info);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  info  (IN): The connector-specific info to free.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefConnto info: to_str
The <em>to_str</em> callback converts a connector-specific information structure to a connector-specific configuration
string. It is the opposite of the <em>from_str</em> callback.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*to_str)(const void *info, char **str);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  info  (IN):  The connector-specific info to convert to a configuration string.
  str   (OUT): The constructed configuration string.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefConnfrom info: from_str
The <em>from_str</em> callback converts a connector-specific configuration string to a connector-specific information
structure. It is the opposite of the <em>to_str</em> callback.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*from_str)(const char *str, void **info);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  str  (IN):  The connector-specific configuration string.
  info (OUT): The connector-specific info generated from the configuration string.
\endcode
</td>
</tr>
</table>

\subsection subsecVOLRefWrap Object Wrap Callbacks
The object wrap callbacks are used by passthrough connectors to wrap/unwrap objects and contexts when
passing them up and down the VOL chain.

<em>Wrap class for object wrapping routines, H5VLconnector.h</em>
\code
typedef struct H5VL_wrap_class_t {
    void *(*get_object)(const void *obj);    // Callback to retrieve underlying object
    herr_t (*get_wrap_ctx)(const void *obj, void **wrap_ctx); // Callback to retrieve the object wrapping context for the connector
    void *(*wrap_object)(void *obj, H5I_type_t obj_type, void *wrap_ctx); // Callback to wrap a library object
    void *(*unwrap_object)(void *obj);       // Callback to unwrap a library object
    herr_t (*free_wrap_ctx)(void *wrap_ctx); // Callback to release the object wrapping context for the connector
} H5VL_wrap_class_t;
\endcode

\subsubsection subsubsecVOLRefWrapobj wrap: get_object
Retrieves an underlying object.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void * (*get_object)(const void *obj);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj  (IN): Object being unwrapped.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefWrapctx wrap: get_wrap_ctx
Get a VOL connector's object wrapping context.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*get_wrap_ctx)(const void *obj, void **wrap_ctx);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj      (IN):  Object for which we need a context.
  wrap_ctx (OUT): Context.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefWrapwrap wrap: wrap_object
Asks a connector to wrap an underlying object.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void * (*wrap_object)(void *obj, H5I_type_t obj_type, void *wrap_ctx);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj       (IN): Object being wrapped.
  obj_type  (IN): Object type (see H5Ipublic.h).
  wrap_ctx  (IN): Context.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefWrapunwrap wrap: unwrap_object
Unwrap an object from connector.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void * (*unwrap_object)(void *obj);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj  (IN): Object being unwrapped.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefWrapfree wrap: free_wrap_ctx
Release a VOL connector's object wrapping context.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*free_wrap_ctx)(void *wrap_ctx);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  wrap_ctx  (IN): Context to be freed.
\endcode
</td>
</tr>
</table>

\subsection subsecVOLRefAttr The Attribute Function Callbacks
The attribute API routines (\ref H5A) allow HDF5 users to create and manage HDF5 attributes. All the \ref H5A
API routines that modify the HDF5 container map to one of the attribute callback routines in this class
that the connector needs to implement.

<em>Structure for attribute callback routines, H5VLconnector.h</em>
\code
typedef struct H5VL_attr_class_t {
    void *(*create)(void *obj, const H5VL_loc_params_t *loc_params, const char *attr_name, hid_t type_id,
                    hid_t space_id, hid_t acpl_id, hid_t aapl_id, hid_t dxpl_id, void **req);
    void *(*open)(void *obj, const H5VL_loc_params_t *loc_params, const char *attr_name, hid_t aapl_id,
                  hid_t dxpl_id, void **req);
    herr_t (*read)(void *attr, hid_t mem_type_id, void *buf, hid_t dxpl_id, void **req);
    herr_t (*write)(void *attr, hid_t mem_type_id, const void *buf, hid_t dxpl_id, void **req);
    herr_t (*get)(void *obj, H5VL_attr_get_args_t *args, hid_t dxpl_id, void **req);
    herr_t (*specific)(void *obj, const H5VL_loc_params_t *loc_params, H5VL_attr_specific_args_t *args,
                       hid_t dxpl_id, void **req);
    herr_t (*optional)(void *obj, H5VL_optional_args_t *args, hid_t dxpl_id, void **req);
    herr_t (*close)(void *attr, hid_t dxpl_id, void **req);
} H5VL_attr_class_t;
\endcode

\subsubsection subsubsecVOLRefAttrcreate attr: create
The <em>create</em> callback in the attribute class creates an attribute object in the container of the location object
and returns a pointer to the attribute structure containing information to access the attribute in future calls.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void *(*create)(void *obj, H5VL_loc_params_t *loc_params, const char *attr_name, hid_t type_id, hid_t space_id, hid_t acpl_id, hid_t aapl_id, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): Pointer to an object where the attribute needs to be created or where the look-up
                   of the target object needs to start.
  loc_params (IN): Pointer to the location parameters as explained in "Mapping the API to the Callbacks".
  attr_name  (IN): The name of the attribute to be created.
  type_id    (IN): The datatype of the attribute.
  space_id   (IN): The dataspace of the attribute.
  acpl_id    (IN): The attribute creation property list.
  aapl_id    (IN): The attribute access property list.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefAttropen attr: open
The <em>open</em> callback in the attribute class opens an attribute object in the container of the location object and
returns a pointer to the attribute structure containing information to access the attribute in future calls.<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void *(*open)(void *obj, H5VL_loc_params_t *loc_params, const char *attr_name, hid_t aapl_id, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): Pointer to an object where the attribute needs to be opened or where the look-up
                   of the target object needs to start.
  loc_params (IN): Pointer to the location parameters as explained in "Mapping the API to the Callbacks".
  attr_name  (IN): The name of the attribute to be opened.
  aapl_id    (IN): The attribute access property list.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefAttrread attr: read
The <em>read</em> callback in the attribute class reads data from the attribute object and returns an <em>herr_t</em> indicating
success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*read)(void *attr, hid_t mem_type_id, void *buf, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  attr        (IN): Pointer to the attribute object.
  mem_type_id (IN): The memory datatype of the attribute.
  buf        (OUT): Data buffer to be read into.
  dxpl_id     (IN): The data transfer property list.
  req     (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefAttrwrite attr: write
The <em>write</em> callback in the attribute class writes data to the attribute object and returns an <em>herr_t</em> indicating
success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*write)(void *attr, hid_t mem_type_id, const void *buf, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  attr        (IN): Pointer to the attribute object.
  mem_type_id (IN): The memory datatype of the attribute.
  buf         (IN): Data buffer to be written.
  dxpl_id     (IN): The data transfer property list.
  req     (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefAttrget attr: get
The <em>get</em> callback in the attribute class retrieves information about the attribute as specified in the <em>get_type</em> parameter.
It returns an <em>herr_t</em> indicating success or failure
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*get)(void *obj, H5VL_attr_get_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj      (IN): An attribute or location object where information needs to be retrieved from.
  args (IN/OUT): A pointer to the arguments struct.
  dxpl_id  (IN): The data transfer property list.
  req  (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\code
/* Values for attribute 'get' operations */
typedef enum H5VL_attr_get_t {
    H5VL_ATTR_GET_ACPL,         /* creation property list              */
    H5VL_ATTR_GET_INFO,         /* info                                */
    H5VL_ATTR_GET_NAME,         /* access property list                */
    H5VL_ATTR_GET_SPACE,        /* dataspace                           */
    H5VL_ATTR_GET_STORAGE_SIZE, /* storage size                        */
    H5VL_ATTR_GET_TYPE          /* datatype                            */
} H5VL_attr_get_t;

/* Parameters for attribute 'get_name' operation */
typedef struct H5VL_attr_get_name_args_t {
    H5VL_loc_params_t loc_params;    /* Location parameters for object access */
    size_t            buf_size;      /* Size of attribute name buffer */
    char             *buf;           /* Buffer for attribute name (OUT) */
    size_t           *attr_name_len; /* Actual length of attribute name (OUT) */
} H5VL_attr_get_name_args_t;

/* Parameters for attribute 'get_info' operation */
typedef struct H5VL_attr_get_info_args_t {
    H5VL_loc_params_t loc_params; /* Location parameters for object access */
    const char       *attr_name;  /* Attribute name (for get_info_by_name) */
    H5A_info_t       *ainfo;      /* Attribute info (OUT) */
} H5VL_attr_get_info_args_t;

/* Parameters for attribute 'get' operations */
typedef struct H5VL_attr_get_args_t {
    H5VL_attr_get_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_ATTR_GET_ACPL */
        struct {
            hid_t acpl_id; /* Attribute creation property list ID (OUT) */
        } get_acpl;

        /* H5VL_ATTR_GET_INFO */
        H5VL_attr_get_info_args_t get_info; /* Attribute info */

        /* H5VL_ATTR_GET_NAME */
        H5VL_attr_get_name_args_t get_name; /* Attribute name */

        /* H5VL_ATTR_GET_SPACE */
        struct {
            hid_t space_id; /* Dataspace ID (OUT) */
        } get_space;

        /* H5VL_ATTR_GET_STORAGE_SIZE */
        struct {
            hsize_t *data_size; /* Size of attribute in file (OUT) */
        } get_storage_size;

        /* H5VL_ATTR_GET_TYPE */
        struct {
            hid_t type_id; /* Datatype ID (OUT) */
        } get_type;
    } args;
} H5VL_attr_get_args_t;
\endcode

\subsubsection subsubsecVOLRefAttrspec attr: specific
The <em>specific</em> callback in the attribute class implements specific operations on HDF5 attributes as specified
in the <em>specific_type</em> parameter.  It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*specific)(void *obj, H5VL_loc_params_t *loc_params, H5VL_attr_specific_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): The location object where the operation needs to happen.
  loc_params (IN): A pointer to the location parameters as explained in "Mapping the API to the Callbacks".
  args   (IN/OUT): A pointer to the arguments struct.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\code
/* Values for attribute 'specific' operation */
typedef enum H5VL_attr_specific_t {
    H5VL_ATTR_DELETE,        /* H5Adelete(_by_name)  */
    H5VL_ATTR_DELETE_BY_IDX, /* H5Adelete_by_idx     */
    H5VL_ATTR_EXISTS,        /* H5Aexists(_by_name)  */
    H5VL_ATTR_ITER,          /* H5Aiterate(_by_name) */
    H5VL_ATTR_RENAME         /* H5Arename(_by_name)  */
} H5VL_attr_specific_t;

/* Parameters for attribute 'iterate' operation */
typedef struct H5VL_attr_iterate_args_t {
    H5_index_t      idx_type; /* Type of index to iterate over */
    H5_iter_order_t order;    /* Order of index iteration */
    hsize_t        *idx;      /* Start/stop iteration index (IN/OUT) */
    H5A_operator2_t op;       /* Iteration callback function */
    void           *op_data;  /* Iteration callback context */
} H5VL_attr_iterate_args_t;

/* Parameters for attribute 'delete_by_idx' operation */
typedef struct H5VL_attr_delete_by_idx_args_t {
    H5_index_t      idx_type; /* Type of index to iterate over */
    H5_iter_order_t order;    /* Order of index iteration */
    hsize_t         n;        /* Iteration index */
} H5VL_attr_delete_by_idx_args_t;

/* Parameters for attribute 'specific' operations */
typedef struct H5VL_attr_specific_args_t {
    H5VL_attr_specific_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_ATTR_DELETE */
        struct {
            const char *name; /* Name of attribute to delete */
        } del;

        /* H5VL_ATTR_DELETE_BY_IDX */
        H5VL_attr_delete_by_idx_args_t delete_by_idx;

        /* H5VL_ATTR_EXISTS */
        struct {
            const char *name;   /* Name of attribute to check */
            hbool_t    *exists; /* Whether attribute exists (OUT) */
        } exists;

        /* H5VL_ATTR_ITER */
        H5VL_attr_iterate_args_t iterate;

        /* H5VL_ATTR_RENAME */
        struct {
            const char *old_name; /* Name of attribute to rename */
            const char *new_name; /* New attribute name */
        } rename;
    } args;
} H5VL_attr_specific_args_t;
\endcode

\subsubsection subsubsecVOLRefAttropt attr: optional
The <em>optional</em> callback in the attribute class implements connector specific operations on an HDF5 attribute.
It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*optional)(void *obj, H5VL_optional_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj      (IN): The container or object where the operation needs to happen.
  args (IN/OUT): A pointer to the arguments struct.
  dxpl_id  (IN): The data transfer property list.
  req  (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
Each connector that requires connector-specific operations should compare the value of the <em>op_type</em> field of
the #H5VL_optional_args_t struct with the values returned from calling #H5VLregister_opt_operation to
determine how to handle the optional call and interpret the arguments passed in the struct.

\subsubsection subsubsecVOLRefAttrclose attr: close
The <em>close</em> callback in the attribute class terminates access to the attribute object and free all resources it
was consuming, and returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*close)(void *attr, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  attr     (IN): Pointer to the attribute object.
  dxpl_id  (IN): The data transfer property list.
  req  (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsection subsecVOLRefDset Dataset Callbacks
The dataset API routines (\ref H5D) allow HDF5 users to create and manage HDF5 datasets. All the \ref H5D API
routines that modify the HDF5 container map to one of the dataset callback routines in this class that the
connector needs to implement.

<em>Structure for dataset callback routines, H5VLconnector.h</em>
\code
typedef struct H5VL_dataset_class_t {
    void *(*create)(void *obj, const H5VL_loc_params_t *loc_params, const char *name, hid_t lcpl_id,
                    hid_t type_id, hid_t space_id, hid_t dcpl_id, hid_t dapl_id, hid_t dxpl_id, void **req);
    void *(*open)(void *obj, const H5VL_loc_params_t *loc_params, const char *name, hid_t dapl_id,
                  hid_t dxpl_id, void **req);
    herr_t (*read)(size_t count, void *dset[], hid_t mem_type_id[], hid_t mem_space_id[],
                   hid_t file_space_id[], hid_t dxpl_id, void *buf[], void **req);
    herr_t (*write)(size_t count, void *dset[], hid_t mem_type_id[], hid_t mem_space_id[],
                    hid_t file_space_id[], hid_t dxpl_id, const void *buf[], void **req);
    herr_t (*get)(void *obj, H5VL_dataset_get_args_t *args, hid_t dxpl_id, void **req);
    herr_t (*specific)(void *obj, H5VL_dataset_specific_args_t *args, hid_t dxpl_id, void **req);
    herr_t (*optional)(void *obj, H5VL_optional_args_t *args, hid_t dxpl_id, void **req);
    herr_t (*close)(void *dset, hid_t dxpl_id, void **req);
} H5VL_dataset_class_t;
\endcode

\subsubsection subsubsecVOLRefDsetcreate dataset: create
The <em>create</em> callback in the dataset class creates a dataset object in the container of the location object and
returns a pointer to the dataset structure containing information to access the dataset in future calls.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void *(*create)(void *obj, H5VL_loc_params_t *loc_params, const char *name, hid_t lcpl_id,hid_t type_id, hid_t space_id, hid_t dcpl_id, hid_t dapl_id, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): Pointer to an object where the dataset needs to be created or where the look-up of
                   the target object needs to start.
  loc_params (IN): Pointer to the location parameters as explained in "Mapping the API to the Callbacks".
                   The type can be only H5VL_OBJECT_BY_SELF in this callback.
  name       (IN): The name of the dataset to be created.
  lcpl_id    (IN): The link creation property list.
  type_id    (IN): The datatype of the dataset.
  space_id   (IN): The dataspace of the dataset.
  dcpl_id    (IN): The dataset creation property list.
  dapl_id    (IN): The dataset access property list.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefDsetopen dataset: open
The <em>open</em> callback in the dataset class opens a dataset object in the container of the location object and
returns a pointer to the dataset structure containing information to access the dataset in future calls.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void *(*open)(void *obj, H5VL_loc_params_t *loc_params, const char *name, hid_t dapl_id, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): Pointer to an object where the dataset needs to be opened or where the look-up of the target object needs to start.
  loc_params (IN): Pointer to the location parameters as explained in "Mapping the API to the Callbacks".
                   The type can be only H5VL_OBJECT_BY_SELF in this callback.
  name       (IN): The name of the dataset to be opened.
  dapl_id    (IN): The dataset access property list.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefDsetread dataset: read
The <em>read</em> callback in the dataset class reads data from the dataset object and returns an <em>herr_t</em> indicating
success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*read)(void *dset, hid_t mem_type_id, hid_t mem_space_id, hid_t file_space_id, hid_t dxpl_id, void *buf, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  dset          (IN): Pointer to the dataset object.
  mem_type_id   (IN): The memory datatype of the data.
  mem_space_id  (IN): The memory dataspace selection.
  file_space_id (IN): The file dataspace selection.
  dxpl_id       (IN): The data transfer property list.
  buf          (OUT): Data buffer to be read into.
  req       (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefDsetwrite dataset: write
The <em>write</em> callback in the dataset class writes data to the dataset object and returns an <em>herr_t</em> indicating
success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*write)(void *dset, hid_t mem_type_id, hid_t mem_space_id, hid_t file_space_id, hid_t dxpl_id, const void *buf, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  dset          (IN): Pointer to the dataset object.
  mem_type_id   (IN): The memory datatype of the data.
  mem_space_id  (IN): The memory dataspace selection.
  file_space_id (IN): The file dataspace selection.
  dxpl_id       (IN): The data transfer property list.
  buf           (IN): Data buffer to be written from.
  req       (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefDsetget dataset: get
The <em>get</em> callback in the dataset class retrieves information about the dataset as specified in the <em>get_type</em>
parameter.It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*get)(void *dset, H5VL_dataset_get_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  dset     (IN): The dataset object where information needs to be retrieved from.
  args (IN/OUT): A pointer to the arguments struct.
  dxpl_id  (IN): The data transfer property list.
  req  (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
\code
/* Values for dataset 'get' operation */
typedef enum H5VL_dataset_get_t {
    H5VL_DATASET_GET_DAPL,         /* access property list                */
    H5VL_DATASET_GET_DCPL,         /* creation property list              */
    H5VL_DATASET_GET_SPACE,        /* dataspace                           */
    H5VL_DATASET_GET_SPACE_STATUS, /* space status                        */
    H5VL_DATASET_GET_STORAGE_SIZE, /* storage size                        */
    H5VL_DATASET_GET_TYPE          /* datatype                            */
} H5VL_dataset_get_t;

/* Parameters for dataset 'get' operations */
typedef struct H5VL_dataset_get_args_t {
    H5VL_dataset_get_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_DATASET_GET_DAPL */
        struct {
            hid_t dapl_id; /* Dataset access property list ID (OUT) */
        } get_dapl;

        /* H5VL_DATASET_GET_DCPL */
        struct {
            hid_t dcpl_id; /* Dataset creation property list ID (OUT) */
        } get_dcpl;

        /* H5VL_DATASET_GET_SPACE */
        struct {
            hid_t space_id; /* Dataspace ID (OUT) */
        } get_space;

        /* H5VL_DATASET_GET_SPACE_STATUS */
        struct {
            H5D_space_status_t *status; /* Storage space allocation status (OUT) */
        } get_space_status;

        /* H5VL_DATASET_GET_STORAGE_SIZE */
        struct {
            hsize_t *storage_size; /* Size of dataset's storage (OUT) */
        } get_storage_size;

        /* H5VL_DATASET_GET_TYPE */
        struct {
            hid_t type_id; /* Datatype ID (OUT) */
        } get_type;
    } args;
} H5VL_dataset_get_args_t;
\endcode

\subsubsection subsubsecVOLRefDsetspec dataset: specific
The <em>specific</em> callback in the dataset class implements specific operations on HDF5 datasets as specified in
the <em>specific_type</em> parameter. It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*specific)(void *obj, H5VL_file_specific_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj      (IN): The dset where the operation needs to happen.
  args (IN/OUT): A pointer to the arguments struct.
  dxpl_id  (IN): The data transfer property list.
  req  (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
\code
/* Values for dataset 'specific' operation */
typedef enum H5VL_dataset_specific_t {
    H5VL_DATASET_SET_EXTENT, /* H5Dset_extent                       */
    H5VL_DATASET_FLUSH,      /* H5Dflush                            */
    H5VL_DATASET_REFRESH     /* H5Drefresh                          */
} H5VL_dataset_specific_t;

/* Parameters for dataset 'specific' operations */
typedef struct H5VL_dataset_specific_args_t {
    H5VL_dataset_specific_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_DATASET_SET_EXTENT */
        struct {
            const hsize_t *size; /* New dataspace extent */
        } set_extent;

        /* H5VL_DATASET_FLUSH */
        struct {
            hid_t dset_id; /* Dataset ID (IN) */
        } flush;

        /* H5VL_DATASET_REFRESH */
        struct {
            hid_t dset_id; /* Dataset ID (IN) */
        } refresh;
    } args;
} H5VL_dataset_specific_args_t;
\endcode

\subsubsection subsubsecVOLRefDsetopt dataset: optional
The <em>optional</em> callback in the dataset class implements connector specific operations on an HDF5 dataset.
It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*optional)(void *obj, H5VL_optional_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj      (IN): The container or object where the operation needs to happen.
  args (IN/OUT): A pointer to the arguments struct.
  dxpl_id  (IN): The data transfer property list.
  req  (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
Each connector that requires connector-specific operations should compare the value of the <em>op_type</em> field of
the #H5VL_optional_args_t struct with the values returned from calling #H5VLregister_opt_operation to
determine how to handle the optional call and interpret the arguments passed in the struct.

\subsubsection subsubsecVOLRefDsetclose dataset: close
The <em>close</em> callback in the dataset class terminates access to the dataset object and free all resources it was
consuming and returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*close)(void *dset, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  dset    (IN): Pointer to the dataset object.
  dxpl_id (IN): The data transfer property list.
  req (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsection subsecVOLRefDType Datatype Callbacks
The HDF5 datatype routines (\ref H5T) allow users to create and manage HDF5 datatypes.  Those routines are
divided into two categories. One that operates on all types of datatypes but do not modify the contents of the
container (all in memory), and others that operate on named datatypes by accessing the container. When
a user creates an HDF5 datatype, it is still an object in memory space (transient datatype) that has not
been added to the HDF5 containers. Only when a user commits the HDF5 datatype, it becomes persistent
in the container. Those are called named/committed datatypes. The transient H5T routines should work
on named datatypes nevertheless.

All the \ref H5T API routines that modify the HDF5 container map to one of the named datatype callback
routines in this class that the connector needs to implement.

<em>Structure for datatype callback routines, H5VLconnector.h</em>
\code
typedef struct H5VL_datatype_class_t {
    void *(*commit)(void *obj, const H5VL_loc_params_t *loc_params, const char *name, hid_t type_id,
                    hid_t lcpl_id, hid_t tcpl_id, hid_t tapl_id, hid_t dxpl_id, void **req);
    void *(*open)(void *obj, const H5VL_loc_params_t *loc_params, const char *name, hid_t tapl_id,
                  hid_t dxpl_id, void **req);
    herr_t (*get)(void *obj, H5VL_datatype_get_args_t *args, hid_t dxpl_id, void **req);
    herr_t (*specific)(void *obj, H5VL_datatype_specific_args_t *args, hid_t dxpl_id, void **req);
    herr_t (*optional)(void *obj, H5VL_optional_args_t *args, hid_t dxpl_id, void **req);
    herr_t (*close)(void *dt, hid_t dxpl_id, void **req);
} H5VL_datatype_class_t;
\endcode

\subsubsection subsubsecVOLRefDTypecommit datatype: commit
The <em>commit</em> callback in the named datatype class creates a datatype object in the container of the location
object and returns a pointer to the datatype structure containing information to access the datatype in
future calls.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void *(*commit)(void *obj, H5VL_loc_params_t *loc_params, const char *name, hid_t type_id, hid_t lcpl_id, hid_t tcpl_id, hid_t tapl_id, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): Pointer to an object where the datatype needs to be committed or where the look-up of the target object needs to start.
  loc_params (IN): Pointer to location parameters as explained in "Mapping the API to the Callbacks".
                   In this call, the location type is always H5VL_OBJECT_BY_SELF.
  name       (IN): The name of the datatype to be created.
  typeid     (IN): The transient datatype identifier to be committed.
  lcpl_id    (IN): The link creation property list.
  tcpl_id    (IN): The datatype creation property list.
  tapl_id    (IN): The datatype access property list.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefDTypeopen datatype: open
The <em>open</em> callback in the named datatype class opens a previously committed datatype object in the container
of the location object and returns a pointer to the datatype structure containing information to access the
datatype in future calls.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void *(*open) (void *obj, H5VL_loc_params_t *loc_params, const char * name, hid_t tapl_id, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): Pointer to an object where the datatype needs to be opened or where the look-up
                   of the target object needs to start.
  loc_params (IN): Pointer to location parameters as explained in "Mapping the API to the Callbacks".
                   In this call, the location type is always H5VL_OBJECT_BY_SELF.
  name       (IN): The name of the datatype to be opened.
  tapl_id    (IN): The datatype access property list.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefDTypeget datatype: get
The <em>get</em> callback in the named datatype class retrieves information about the named datatype as specified
in thegettypeparameter.It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*get) (void *obj, H5VL_datatype_get_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj      (IN): The named datatype to retrieve information from.
  args (IN/OUT): A pointer to the arguments struct.
  dxpl_id  (IN): The data transfer property list.
  req  (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
\code
/* Values for datatype 'get' operation */
typedef enum H5VL_datatype_get_t {
    H5VL_DATATYPE_GET_BINARY_SIZE, /* Get size of serialized form of transient type */
    H5VL_DATATYPE_GET_BINARY,      /* Get serialized form of transient type         */
    H5VL_DATATYPE_GET_TCPL         /* Datatype creation property list               */
} H5VL_datatype_get_t;

/* Parameters for datatype 'get' operations */
typedef struct H5VL_datatype_get_args_t {
    H5VL_datatype_get_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_DATATYPE_GET_BINARY_SIZE */
        struct {
            size_t *size; /* Size of serialized form of datatype (OUT) */
        } get_binary_size;

        /* H5VL_DATATYPE_GET_BINARY */
        struct {
            void  *buf;      /* Buffer to store serialized form of datatype (OUT) */
            size_t buf_size; /* Size of serialized datatype buffer */
        } get_binary;

        /* H5VL_DATATYPE_GET_TCPL */
        struct {
            hid_t tcpl_id; /* Named datatype creation property list ID (OUT) */
        } get_tcpl;
    } args;
} H5VL_datatype_get_args_t;
\endcode

\subsubsection subsubsecVOLRefDTypespec datatype: specific
The <em>specific</em> callback in the datatype class implements specific operations on HDF5 named datatypes as
specified in the <em>specific_type</em> parameter.  It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*specific)(void *obj, H5VL_loc_params_t *loc_params, H5VL_object_specific_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): The container or object where the operation needs to happen.
  loc_params (IN): Pointer to location parameters as explained in "Mapping the API to the Callbacks".
  args   (IN/OUT): A pointer to the arguments struct.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
\code
/* Values for datatype 'specific' operation */
typedef enum H5VL_datatype_specific_t {
    H5VL_DATATYPE_FLUSH,  /* H5Tflush */
    H5VL_DATATYPE_REFRESH /* H5Trefresh */
} H5VL_datatype_specific_t;

/* Parameters for datatype 'specific' operations */
typedef struct H5VL_datatype_specific_args_t {
    H5VL_datatype_specific_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_DATATYPE_FLUSH */
        struct {
            hid_t type_id; /* Named datatype ID (IN) */
        } flush;

        /* H5VL_DATATYPE_REFRESH */
        struct {
            hid_t type_id; /* Named datatype ID (IN) */
        } refresh;
    } args;
} H5VL_datatype_specific_args_t;
\endcode

\subsubsection subsubsecVOLRefDTypeopt datatype: optional
The <em>optional</em> callback in the datatype class implements connector specific operations on an HDF5 datatype.
It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*optional)(void *obj, H5VL_optional_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj      (IN): The container or object where the operation needs to happen.
  args (IN/OUT): A pointer to the arguments struct.
  dxpl_id  (IN): The data transfer property list.
  req  (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

Each connector that requires connector-specific operations should compare the value of the <em>op_type</em> field of
the #H5VL_optional_args_t struct with the values returned from calling #H5VLregister_opt_operation to
determine how to handle the optional call and interpret the arguments passed in the struct.

\subsubsection subsubsecVOLRefDTypeclose datatype: close
The <em>close</em> callback in the named datatype class terminates access to the datatype object and free all
resources it was consuming and returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*close) (void *dt, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  dt      (IN): Pointer to the datatype object.
  dxpl_id (IN): The data transfer property list.
  req (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsection subsecVOLRefFile File Callbacks
The file API routines (\ref H5F) allow HDF5 users to create and manage HDF5 containers. All the \ref H5F API
routines that modify the HDF5 container map to one of the file callback routines in  his class that the
connector needs to implement.

<em>File class for file API routines, H5VLconnector.h</em>
\code
typedef struct H5VL_file_class_t {
    void *(*create)(const char *name, unsigned flags, hid_t fcpl_id, hid_t fapl_id, hid_t dxpl_id,
                    void **req);
    void *(*open)(const char *name, unsigned flags, hid_t fapl_id, hid_t dxpl_id, void **req);
    herr_t (*get)(void *obj, H5VL_file_get_args_t *args, hid_t dxpl_id, void **req);
    herr_t (*specific)(void *obj, H5VL_file_specific_args_t *args, hid_t dxpl_id, void **req);
    herr_t (*optional)(void *obj, H5VL_optional_args_t *args, hid_t dxpl_id, void **req);
    herr_t (*close)(void *file, hid_t dxpl_id, void **req);
} H5VL_file_class_t;
\endcode

\subsubsection subsubsecVOLRefFilecreate file: create
The <em>create</em> callback in the file class should create a container and returns a pointer to the file structure
created by the connector containing information to access the container in future calls.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void *(*create)(const char *name, unsigned flags, hid_t fcpl_id, hid_t fapl_id, hid_tdxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  name    (IN): The name of the container to be created.
  flags   (IN): The creation flags of the container.
  fcpl_id (IN): The file creation property list.
  fapl_id (IN): The file access property list.
  dxpl_id (IN): The data transfer property list.
  req (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefFileopen file: open
The <em>open</em> callback in the file class should open a container and returns a pointer to the file structure created
by the connector containing information to access the container in future calls.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void *(*open)(const char *name, unsigned flags, hid_t fapl_id, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  name    (IN): The name of the container to open.
  flags   (IN): The open flags of the container.
  fapl_id (IN): The file access property list.
  dxpl_id (IN): The data transfer property list.
  req (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefFileget file: get
The <em>get</em> callback in the file class should retrieve information about the container as specified in the <em>get_type</em>
parameter. It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*get)(void *obj, H5VL_file_get_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj      (IN): The container or object where information needs to be retrieved from.
  args (IN/OUT): A pointer to the arguments struct.
  dxpl_id  (IN): The data transfer property list.
  req  (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
\code
/* Info for H5VL_FILE_GET_CONT_INFO */
typedef struct H5VL_file_cont_info_t {
    unsigned version;       /* version information (keep first) */
    uint64_t feature_flags; /* Container feature flags          */
                            /* (none currently defined)         */
    size_t token_size;      /* Size of tokens                   */
    size_t blob_id_size;    /* Size of blob IDs                 */
} H5VL_file_cont_info_t;

/* Values for file 'get' operation */
typedef enum H5VL_file_get_t {
    H5VL_FILE_GET_CONT_INFO, /* file get container info              */
    H5VL_FILE_GET_FAPL,      /* file access property list            */
    H5VL_FILE_GET_FCPL,      /* file creation property list          */
    H5VL_FILE_GET_FILENO,    /* file number                          */
    H5VL_FILE_GET_INTENT,    /* file intent                          */
    H5VL_FILE_GET_NAME,      /* file name                            */
    H5VL_FILE_GET_OBJ_COUNT, /* object count in file                 */
    H5VL_FILE_GET_OBJ_IDS    /* object ids in file                   */
} H5VL_file_get_t;

/* Parameters for file 'get_name' operation */
typedef struct H5VL_file_get_name_args_t {
    H5I_type_t type;          /* ID type of object pointer */
    size_t     buf_size;      /* Size of file name buffer (IN) */
    char      *buf;           /* Buffer for file name (OUT) */
    size_t    *file_name_len; /* Actual length of file name (OUT) */
} H5VL_file_get_name_args_t;

/* Parameters for file 'get_obj_ids' operation */
typedef struct H5VL_file_get_obj_ids_args_t {
    unsigned types;    /* Type of objects to count */
    size_t   max_objs; /* Size of array of object IDs */
    hid_t   *oid_list; /* Array of object IDs (OUT) */
    size_t  *count;    /* # of objects (OUT) */
} H5VL_file_get_obj_ids_args_t;

/* Parameters for file 'get' operations */
typedef struct H5VL_file_get_args_t {
    H5VL_file_get_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_FILE_GET_CONT_INFO */
        struct {
            H5VL_file_cont_info_t *info; /* Container info (OUT) */
        } get_cont_info;

        /* H5VL_FILE_GET_FAPL */
        struct {
            hid_t fapl_id; /* File access property list (OUT) */
        } get_fapl;

        /* H5VL_FILE_GET_FCPL */
        struct {
            hid_t fcpl_id; /* File creation property list (OUT) */
        } get_fcpl;

        /* H5VL_FILE_GET_FILENO */
        struct {
            unsigned long *fileno; /* File "number" (OUT) */
        } get_fileno;

        /* H5VL_FILE_GET_INTENT */
        struct {
            unsigned *flags; /* File open/create intent flags (OUT) */
        } get_intent;

        /* H5VL_FILE_GET_NAME */
        H5VL_file_get_name_args_t get_name;

        /* H5VL_FILE_GET_OBJ_COUNT */
        struct {
            unsigned types; /* Type of objects to count */
            size_t  *count; /* # of objects (OUT) */
        } get_obj_count;

        /* H5VL_FILE_GET_OBJ_IDS */
        H5VL_file_get_obj_ids_args_t get_obj_ids;
    } args;
} H5VL_file_get_args_t;
\endcode

\subsubsection subsubsecVOLRefFilespec file: specific
The <em>specific</em> callback in the file class implements specific operations on HDF5 files as specified in the
<em>specific_type</em> parameter. It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*specific)(void *obj, H5VL_file_specific_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj      (IN): The container or object where the operation needs to happen.
  args (IN/OUT): A pointer to the arguments struct.
  dxpl_id  (IN): The data transfer property list.
  req  (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
\code
/* Values for file 'specific' operation */
typedef enum H5VL_file_specific_t {
    H5VL_FILE_FLUSH,         /* Flush file                       */
    H5VL_FILE_REOPEN,        /* Reopen the file                  */
    H5VL_FILE_IS_ACCESSIBLE, /* Check if a file is accessible    */
    H5VL_FILE_DELETE,        /* Delete a file                    */
    H5VL_FILE_IS_EQUAL       /* Check if two files are the same  */
} H5VL_file_specific_t;

/* Parameters for file 'specific' operations */
typedef struct H5VL_file_specific_args_t {
    H5VL_file_specific_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_FILE_FLUSH */
        struct {
            H5I_type_t  obj_type; /* Type of object to use */
            H5F_scope_t scope;    /* Scope of flush operation */
        } flush;

        /* H5VL_FILE_REOPEN */
        struct {
            void **file; /* File object for new file (OUT) */
        } reopen;

        /* H5VL_FILE_IS_ACCESSIBLE */
        struct {
            const char *filename;   /* Name of file to check */
            hid_t       fapl_id;    /* File access property list to use */
            hbool_t    *accessible; /* Whether file is accessible with FAPL settings (OUT) */
        } is_accessible;

        /* H5VL_FILE_DELETE */
        struct {
            const char *filename; /* Name of file to delete */
            hid_t       fapl_id;  /* File access property list to use */
        } del;

        /* H5VL_FILE_IS_EQUAL */
        struct {
            void    *obj2;      /* Second file object to compare against */
            hbool_t *same_file; /* Whether files are the same (OUT) */
        } is_equal;
    } args;
} H5VL_file_specific_args_t;
\endcode

\subsubsection subsubsecVOLRefFileopt file: optional
The <em>optional</em> callback in the file class implements connector specific operations on an HDF5 container. It
returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*optional)(void *obj, H5VL_optional_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj      (IN): The container or object where the operation needs to happen.
  args (IN/OUT): A pointer to the arguments struct.
  dxpl_id  (IN): The data transfer property list.
  req  (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
Each connector that requires connector-specific operations should compare the value of the <em>op_type</em> field of
the #H5VL_optional_args_t struct with the values returned from calling #H5VLregister_opt_operation to
determine how to handle the optional call and interpret the arguments passed in the struct.

\subsubsection subsubsecVOLRefFileclose file: close
The <em>close</em> callback in the file class should terminate access to the file object and free all resources it was
consuming, and returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*close)(void *file, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  file     (IN): Pointer to the file.
  dxpl_id  (IN): The data transfer property list.
  req  (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsection subsecVOLRefGrp Group Callbacks
The group API routines (\ref H5G) allow HDF5 users to create and manage HDF5 groups.  All the \ref H5G API
routines that modify the HDF5 container map to one of the group callback routines in this class that the
connector needs to implement.

<em>Structure for group callback routines, H5VLconnector.h</em>
\code
typedef struct H5VL_group_class_t {
    void *(*create)(void *obj, const H5VL_loc_params_t *loc_params, const char *name, hid_t lcpl_id,
                    hid_t gcpl_id, hid_t gapl_id, hid_t dxpl_id, void **req);
    void *(*open)(void *obj, const H5VL_loc_params_t *loc_params, const char *name, hid_t gapl_id,
                  hid_t dxpl_id, void **req);
    herr_t (*get)(void *obj, H5VL_group_get_args_t *args, hid_t dxpl_id, void **req);
    herr_t (*specific)(void *obj, H5VL_group_specific_args_t *args, hid_t dxpl_id, void **req);
    herr_t (*optional)(void *obj, H5VL_optional_args_t *args, hid_t dxpl_id, void **req);
    herr_t (*close)(void *grp, hid_t dxpl_id, void **req);
} H5VL_group_class_t;
\endcode

\subsubsection subsubsecVOLRefGrpcreate group: create
The <em>create</em> callback in the group class creates a group object in the container of the location object and
returns a pointer to the group structure containing information to access the group in future calls.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void *(*create)(void *obj, H5VL_loc_params_t *loc_params, const char *name, hid_t gcpl_id,hid_t gapl_id, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): Pointer to an object where the group needs to be created or where the look-up of
                   the target object needs to start.
  loc_params (IN): Pointer to the location parameters as explained in "Mapping the API to the Callbacks".
                   The type can be only H5VL_OBJECT_BY_SELF in this callback.
  name       (IN): The name of the group to be created.
  dcpl_id    (IN): The group creation property list. It contains all the group creation properties in
                   addition to the link creation property list of the create operation (an hid_t) that can be
                   retrieved with the property H5VL_GRP_LCPL_ID.
  gapl_id    (IN): The group access property list.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefGrpopen group: open
The <em>open</em> callback in the group class opens a group object in the container of the location object and returns
a pointer to the group structure containing information to access the group in future calls.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void *(*open)(void *obj, H5VL_loc_params_t *loc_params, const char *name, hid_t gapl_id, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): Pointer to an object where the group needs to be opened or where the look-up of the target object needs to start.
  loc_params (IN): Pointer to the location parameters as explained in "Mapping the API to the Callbacks".
                   The type can be only H5VL_OBJECT_BY_SELF in this callback.
  name       (IN): The name of the group to be opened.
  gapl_id    (IN): The group access property list.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefGrpget group: get
The <em>get</em> callback  in  the  group  class  retrieves  information  about  the  group  as  specified  in  the <em>get_type</em>
parameter.  It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*get)(void *obj, H5VL_group_get_args_t *args, hid_t dxpl_id, void **req)
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): The group object where information needs to be retrieved from.
  args   (IN/OUT): A pointer to the arguments struct.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
\code
/* Values for group 'get' operation */
typedef enum H5VL_group_get_t {
    H5VL_GROUP_GET_GCPL, /* group creation property list     */
    H5VL_GROUP_GET_INFO  /* group info                       */
} H5VL_group_get_t;

/* Parameters for group 'get_info' operation */
typedef struct H5VL_group_get_info_args_t {
    H5VL_loc_params_t loc_params; /* Location parameters for object access */
    H5G_info_t       *ginfo;      /* Group info (OUT) */
} H5VL_group_get_info_args_t;

/* Parameters for group 'get' operations */
typedef struct H5VL_group_get_args_t {
    H5VL_group_get_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_GROUP_GET_GCPL */
        struct {
            hid_t gcpl_id; /* Group creation property list (OUT) */
        } get_gcpl;

        /* H5VL_GROUP_GET_INFO */
        H5VL_group_get_info_args_t get_info; /* Group info */
    } args;
} H5VL_group_get_args_t;
\endcode

\subsubsection subsubsecVOLRefGrpspec group: specific
The <em>specific</em> callback in the group class implements specific operations on HDF5 groups as specified in the
<em>specific_type</em> parameter.  It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*specific)(void *obj, H5VL_loc_params_t *loc_params, H5VL_object_specific_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): The container or object where the operation needs to happen.
  loc_params (IN): Pointer to the location parameters as explained in "Mapping the API to the Callbacks".
  args   (IN/OUT): A pointer to the arguments struct.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
\code
/* Values for group 'specific' operation */
typedef enum H5VL_group_specific_t {
    H5VL_GROUP_MOUNT,   /* Mount a file on a group          */
    H5VL_GROUP_UNMOUNT, /* Unmount a file on a group        */
    H5VL_GROUP_FLUSH,   /* H5Gflush                         */
    H5VL_GROUP_REFRESH  /* H5Grefresh                       */
} H5VL_group_specific_t;

/* Parameters for group 'mount' operation */
typedef struct H5VL_group_spec_mount_args_t {
    const char *name;       /* Name of location to mount child file */
    void       *child_file; /* Pointer to child file object */
    hid_t       fmpl_id;    /* File mount property list to use */
} H5VL_group_spec_mount_args_t;

/* Parameters for group 'specific' operations */
typedef struct H5VL_group_specific_args_t {
    H5VL_group_specific_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_GROUP_MOUNT */
        H5VL_group_spec_mount_args_t mount;

        /* H5VL_GROUP_UNMOUNT */
        struct {
            const char *name; /* Name of location to unmount child file */
        } unmount;

        /* H5VL_GROUP_FLUSH */
        struct {
            hid_t grp_id; /* Group ID (IN) */
        } flush;

        /* H5VL_GROUP_REFRESH */
        struct {
            hid_t grp_id; /* Group ID (IN) */
        } refresh;
    } args;
} H5VL_group_specific_args_t;
\endcode

\subsubsection subsubsecVOLRefGrpopt group: optional
The <em>optional</em> callback in the group class implements connector specific operations on an HDF5 group.  It
returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*optional)(void *obj, H5VL_optional_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): The container or object where the operation needs to happen.
  args   (IN/OUT): A pointer to the arguments struct.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
Each connector that requires connector-specific operations should compare the value of the <em>op_type</em> field of
the #H5VL_optional_args_t struct with the values returned from calling #H5VLregister_opt_operation to
determine how to handle the optional call and interpret the arguments passed in the struct.

\subsubsection subsubsecVOLRefGrpclose group: close
The <em>close</em> callback in the group class terminates access to the group object and frees all resources it was
consuming, and returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*close)(void *group, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  group      (IN): Pointer to the group object.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsection subsecVOLRefLink Link Callbacks
The link API routines (\ref H5L) allow HDF5 users to create and manage HDF5 links. All the \ref H5L API routines
that modify the HDF5 container map to one of the link callback routines in this class that the connector
needs to implement.

<em>Structure for link callback routines, H5VLconnector.h</em>
\code
typedef struct H5VL_link_class_t {
    herr_t (*create)(H5VL_link_create_args_t *args, void *obj, const H5VL_loc_params_t *loc_params,
                     hid_t lcpl_id, hid_t lapl_id, hid_t dxpl_id, void **req);
    herr_t (*copy)(void *src_obj, const H5VL_loc_params_t *loc_params1, void *dst_obj,
                   const H5VL_loc_params_t *loc_params2, hid_t lcpl_id, hid_t lapl_id, hid_t dxpl_id,
                   void **req);
    herr_t (*move)(void *src_obj, const H5VL_loc_params_t *loc_params1, void *dst_obj,
                   const H5VL_loc_params_t *loc_params2, hid_t lcpl_id, hid_t lapl_id, hid_t dxpl_id,
                   void **req);
    herr_t (*get)(void *obj, const H5VL_loc_params_t *loc_params, H5VL_link_get_args_t *args, hid_t dxpl_id,
                  void **req);
    herr_t (*specific)(void *obj, const H5VL_loc_params_t *loc_params, H5VL_link_specific_args_t *args,
                       hid_t dxpl_id, void **req);
    herr_t (*optional)(void *obj, const H5VL_loc_params_t *loc_params, H5VL_optional_args_t *args,
                       hid_t dxpl_id, void **req);
} H5VL_link_class_t;
\endcode

\subsubsection subsubsecVOLRefLinkcreate link: create
The <em>create</em> callback in the group class creates a hard, soft, external, or user-defined link in the container.
It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*create)(H5VL_link_create_args_t *args, void *obj, H5VL_loc_params_t *loc_params, hid_t lcpl_id, hid_t lapl_id, hid_t dxpl_id, void **req)
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  args   (IN/OUT): A pointer to the arguments struct.
  obj        (IN): Pointer to an object where the link needs to be created from.
  loc_params (IN): Pointer to the location parameters as explained in "Mapping the API to the Callbacks" for the source object.
  lcplid     (IN): The link creation property list. It contains all the link creation properties in
                   addition to other API parameters depending on the creation type, which will be detailed next.
  laplid     (IN): The link access property list.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
\code
/* Link create types for VOL */
typedef enum H5VL_link_create_t {
    H5VL_LINK_CREATE_HARD,
    H5VL_LINK_CREATE_SOFT,
    H5VL_LINK_CREATE_UD
} H5VL_link_create_t;

/* Parameters for link 'create' operations */
typedef struct H5VL_link_create_args_t {
    H5VL_link_create_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_LINK_CREATE_HARD */
        struct {
            void             *curr_obj;        /* Current object */
            H5VL_loc_params_t curr_loc_params; /* Location parameters for current object */
        } hard;

        /* H5VL_LINK_CREATE_SOFT */
        struct {
            const char *target; /* Target of soft link */
        } soft;

        /* H5VL_LINK_CREATE_UD */
        struct {
            H5L_type_t  type;     /* Type of link to create */
            const void *buf;      /* Buffer that contains link info */
            size_t      buf_size; /* Size of link info buffer */
        } ud;
    } args;
} H5VL_link_create_args_t;
\endcode

\subsubsection subsubsecVOLRefLinkcopy link: copy
The <em>copy</em> callback in the link class copies a link within the HDF5 container. It returns an <em>herr_t</em> indicating
success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*copy)(void *src_obj, H5VL_loc_params_t *loc_params1, void *dst_obj, H5VL_loc_params_t *loc_params2, hid_t lcpl_id, hid_t lapl_id, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  src_obj     (IN): original/source object or file.
  loc_params1 (IN): Pointer to the location parameters for the source object as explained in "Mapping the API to the Callbacks".
                    The type can be only H5VL_OBJECT_BY_NAME in this callback.
  dst_obj     (IN): destination object or file.
  loc_params2 (IN): Pointer to the location parameters for the destination object as explained in "Mapping the API to the Callbacks".
                    The type can be only H5VL_OBJECT_BY_NAME in this callback.
  lcpl_id     (IN): The link creation property list.
  lapl_id     (IN): The link access property list.
  dxpl_id     (IN): The data transfer property list.
  req     (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefLinkmove link: move
The <em>move</em> callback in the link class moves a link within the HDF5 container.  It returns an <em>herr_t</em> indicating
success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*move)(void *src_obj, H5VL_loc_params_t *loc_params1, void *dst_obj, H5VL_loc_params_t *loc_params2, hid_t lcpl_id, hid_t lapl_id, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  src_obj     (IN): original/source object or file.
  loc_params1 (IN): Pointer to the location parameters for the source object as explained in "Mapping the API to the Callbacks".
                    The type can be only H5VL_OBJECT_BY_NAME in this callback.
  dst_obj     (IN): destination object or file.
  loc_params2 (IN): Pointer to the location parameters for the destination object as explained in "Mapping the API to the Callbacks".
                    The type can be only H5VL_OBJECT_BY_NAME in this callback.
  lcpl_id     (IN): The link creation property list.
  lapl_id     (IN): The link access property list.
  dxpl_id     (IN): The data transfer property list.
  req     (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefLinkget link: get
The <em>get</em> callback in the link class retrieves information about links as specified in the <em>get_type</em> parameter.
It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*get)(void *obj, H5VL_loc_params_t *loc_params, H5VL_link_get_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): The file or group object where information needs to be retrieved from.
  loc_params  (IN): Pointer to the location parameters for the destination object as explained in "Mapping the API to the Callbacks".
                   The type can be only H5VL_OBJECT_BY_NAME or H5VL_OBJECT_BY_IDX in this callback.
  args   (IN/OUT): A pointer to the arguments struct.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
\code
/* Values for link 'get' operation */
typedef enum H5VL_link_get_t {
    H5VL_LINK_GET_INFO, /* link info                         */
    H5VL_LINK_GET_NAME, /* link name                         */
    H5VL_LINK_GET_VAL   /* link value                        */
} H5VL_link_get_t;

/* Parameters for link 'get' operations */
typedef struct H5VL_link_get_args_t {
    H5VL_link_get_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_LINK_GET_INFO */
        struct {
            H5L_info2_t *linfo; /* Pointer to link's info (OUT) */
        } get_info;

        /* H5VL_LINK_GET_NAME */
        struct {
            size_t  name_size; /* Size of link name buffer (IN) */
            char   *name;      /* Buffer for link name (OUT) */
            size_t *name_len;  /* Actual length of link name (OUT) */
        } get_name;

        /* H5VL_LINK_GET_VAL */
        struct {
            size_t buf_size; /* Size of link value buffer (IN) */
            void  *buf;      /* Buffer for link value (OUT) */
        } get_val;
    } args;
} H5VL_link_get_args_t;
\endcode

\subsubsection subsubsecVOLRefLinkspec link: specific
The <em>specific</em> callback in the link class implements specific operations on HDF5 links as specified in
the <em>specific_type</em> parameter.  It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*specific)(void *obj, H5VL_loc_params_t *loc_params, H5VL_link_specific_args_t *args, hid_t dxpl_id, void **req)
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): The location object where operation needs to happen.
  loc_params (IN): Pointer to the location parameters for the destination object as explained in "Mapping the API to the Callbacks".
  args   (IN/OUT): A pointer to the arguments struct.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
\code
/* Values for link 'specific' operation */
typedef enum H5VL_link_specific_t {
    H5VL_LINK_DELETE, /* H5Ldelete(_by_idx)                */
    H5VL_LINK_EXISTS, /* link existence                    */
    H5VL_LINK_ITER    /* H5Literate/visit(_by_name)              */
} H5VL_link_specific_t;

/* Parameters for link 'iterate' operation */
typedef struct H5VL_link_iterate_args_t {
    hbool_t         recursive; /* Whether iteration is recursive */
    H5_index_t      idx_type;  /* Type of index to iterate over */
    H5_iter_order_t order;     /* Order of index iteration */
    hsize_t        *idx_p;     /* Start/stop iteration index (OUT) */
    H5L_iterate2_t  op;        /* Iteration callback function */
    void           *op_data;   /* Iteration callback context */
} H5VL_link_iterate_args_t;

/* Parameters for link 'specific' operations */
typedef struct H5VL_link_specific_args_t {
    H5VL_link_specific_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_LINK_DELETE */
        /* No args */

        /* H5VL_LINK_EXISTS */
        struct {
            hbool_t *exists; /* Whether link exists (OUT) */
        } exists;

        /* H5VL_LINK_ITER */
        H5VL_link_iterate_args_t iterate;
    } args;
} H5VL_link_specific_args_t;
\endcode

\subsubsection subsubsecVOLRefLinkopt link: optional
The <em>optional</em> callback in the link class implements connector specific operations on an HDF5 link. It returns
an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*optional)(void *obj, const H5VL_loc_params_t *loc_params, H5VL_optional_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): The container or object where operation needs to happen.
  loc_params (IN): Pointer to the location parameters for the destination object as explained in "Mapping the API to the Callbacks".
  args   (IN/OUT): A pointer to the arguments struct.
  dxpl_id    (IN): The data transfer property list.
  req    (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
Each connector that requires connector-specific operations should compare the value of the <em>op_type</em> field of
the #H5VL_optional_args_t struct with the values returned from calling #H5VLregister_opt_operation to
determine how to handle the optional call and interpret the arguments passed in the struct.

\subsection subsecVOLRefObj Object Callbacks
The object API routines (\ref H5O) allow HDF5 users to manage HDF5 group, dataset, and named datatype
objects. All the \ref H5O API routines that modify the HDF5 container map to one of the object callback
routines in this class that the connector needs to implement.

<em>Structure for object callback routines, H5VLconnector.h</em>
\code
typedef struct H5VL_object_class_t {
    void *(*open)(void *obj, const H5VL_loc_params_t *loc_params, H5I_type_t *opened_type, hid_t dxpl_id,
                  void **req);
    herr_t (*copy)(void *src_obj, const H5VL_loc_params_t *loc_params1, const char *src_name, void *dst_obj,
                   const H5VL_loc_params_t *loc_params2, const char *dst_name, hid_t ocpypl_id, hid_t lcpl_id,
                   hid_t dxpl_id, void **req);
    herr_t (*get)(void *obj, const H5VL_loc_params_t *loc_params, H5VL_object_get_args_t *args, hid_t dxpl_id,
                  void **req);
    herr_t (*specific)(void *obj, const H5VL_loc_params_t *loc_params, H5VL_object_specific_args_t *args,
                       hid_t dxpl_id, void **req);
    herr_t (*optional)(void *obj, const H5VL_loc_params_t *loc_params, H5VL_optional_args_t *args,
                       hid_t dxpl_id, void **req);
} H5VL_object_class_t;
\endcode

\subsubsection subsubsecVOLRefObjopen object: open
The <em>open</em> callback in the object class opens the object in the container of the location object and returns a
pointer to the object structure containing information to access the object in future calls.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void *(*open)(void *obj, H5VL_loc_params_t *loc_params, H5I_type_t *opened_type, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj          (IN): The container or object where operation needs to happen.
  loc_params   (IN): Pointer to the location parameters for the destination object as explained in "Mapping the API to the Callbacks".
  opened_type (OUT): Buffer to return the type of the object opened (H5I_GROUP or H5I_DATASET or H5I_DATATYPE).
  dxpl_id      (IN): The data transfer property list.
  req      (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefObjcopy object: copy
The <em>copy</em> callback in the object class copies the object from the source object to the destination object. It
returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*copy)(void *src_obj, H5VL_loc_params_t *loc_params1, const char *src_name, void *dst_obj, H5VL_loc_params_t *loc_params2, const char *dst_name, hid_t ocpypl_id, hid_t lcpl_id, hid_t dxpl_id, void **req)
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  src_obj     (IN): Pointer to location of the source object to be copied.
  loc_params1 (IN): Pointer to the location parameters for the source object as explained in "Mapping the API to the Callbacks".
                    The type can be only H5VL_OBJECT_BY_SELF in this callback.
  src_name    (IN): Name of the source object to be copied.
  dst_obj     (IN): Pointer to location of the destination object or file.
  loc_params2 (IN): Pointer to the location parameters for the destination object as explained in "Mapping the API to the Callbacks".
                    The type can be only H5VL_OBJECT_BY_SELF in this callback.
  dst_name    (IN): Name o be assigned to the new copy.
  ocpypl_id   (IN): The object copy property list.
  lcpl_id     (IN): The link creation property list.
  dxpl_id     (IN): The data transfer property list.
  req     (IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefObjget object: get
The <em>get</em> callback in the object class retrieves information about the object as specified in
the <em>get_type</em> parameter.It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*get)(void *obj, H5VL_loc_params_t *loc_params, H5VL_object_get_args_t *args, hid_t dxpl_id, void **req)
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): A location object where information needs to be retrieved from.
  loc_params (IN): Pointer to the location parameters for the destination object as explained in "Mapping the API to the Callbacks".
  args   (IN/OUT): A pointer to the arguments struct.
  dxpl_id    (IN): The data transfer property list.
  req     IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
\code
/* Values for object 'get' operation */
typedef enum H5VL_object_get_t {
    H5VL_OBJECT_GET_FILE, /* object file                       */
    H5VL_OBJECT_GET_NAME, /* object name                       */
    H5VL_OBJECT_GET_TYPE, /* object type                       */
    H5VL_OBJECT_GET_INFO  /* H5Oget_info(_by_idx|name)         */
} H5VL_object_get_t;

/* Parameters for object 'get' operations */
typedef struct H5VL_object_get_args_t {
    H5VL_object_get_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_OBJECT_GET_FILE */
        struct {
            void **file; /* File object (OUT) */
        } get_file;

        /* H5VL_OBJECT_GET_NAME */
        struct {
            size_t  buf_size; /* Size of name buffer (IN) */
            char   *buf;      /* Buffer for name (OUT) */
            size_t *name_len; /* Actual length of name (OUT) */
        } get_name;

        /* H5VL_OBJECT_GET_TYPE */
        struct {
            H5O_type_t *obj_type; /* Type of object (OUT) */
        } get_type;

        /* H5VL_OBJECT_GET_INFO */
        struct {
            unsigned     fields; /* Flags for fields to retrieve */
            H5O_info2_t *oinfo;  /* Pointer to object info (OUT) */
        } get_info;
    } args;
} H5VL_object_get_args_t;
\endcode

\subsubsection subsubsecVOLRefObjspec object: specific
The <em>specific</em> callback in the object class implements specific operations on HDF5 objects as specified in
the <em>specific_type</em> parameter.  It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*specific)(void *obj, H5VL_loc_params_t *loc_params, H5VL_object_specific_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): A location object where he operation needs to happen.
  loc_params (IN): Pointer to the location parameters for the destination object as explained in "Mapping the API to the Callbacks".
  args   (IN/OUT): A pointer to the arguments struct.
  dxpl_id    (IN): The data transfer property list.
  req     IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
\code
/* Values for object 'specific' operation */
typedef enum H5VL_object_specific_t {
    H5VL_OBJECT_CHANGE_REF_COUNT, /* H5Oincr/decr_refcount             */
    H5VL_OBJECT_EXISTS,           /* H5Oexists_by_name                 */
    H5VL_OBJECT_LOOKUP,           /* Lookup object                     */
    H5VL_OBJECT_VISIT,            /* H5Ovisit(_by_name)                */
    H5VL_OBJECT_FLUSH,            /* H5{D|G|O|T}flush                  */
    H5VL_OBJECT_REFRESH           /* H5{D|G|O|T}refresh                */
} H5VL_object_specific_t;

/* Parameters for object 'visit' operation */
typedef struct H5VL_object_visit_args_t {
    H5_index_t      idx_type; /* Type of index to iterate over */
    H5_iter_order_t order;    /* Order of index iteration */
    unsigned        fields;   /* Flags for fields to provide in 'info' object for 'op' callback */
    H5O_iterate2_t  op;       /* Iteration callback function */
    void           *op_data;  /* Iteration callback context */
} H5VL_object_visit_args_t;

/* Parameters for object 'specific' operations */
typedef struct H5VL_object_specific_args_t {
    H5VL_object_specific_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_OBJECT_CHANGE_REF_COUNT */
        struct {
            int delta; /* Amount to modify object's refcount */
        } change_rc;

        /* H5VL_OBJECT_EXISTS */
        struct {
            hbool_t *exists; /* Whether object exists (OUT) */
        } exists;

        /* H5VL_OBJECT_LOOKUP */
        struct {
            H5O_token_t *token_ptr; /* Pointer to token for lookup (OUT) */
        } lookup;

        /* H5VL_OBJECT_VISIT */
        H5VL_object_visit_args_t visit;

        /* H5VL_OBJECT_FLUSH */
        struct {
            hid_t obj_id; /* Object ID (IN) */
        } flush;

        /* H5VL_OBJECT_REFRESH */
        struct {
            hid_t obj_id; /* Object ID (IN) */
        } refresh;
    } args;
} H5VL_object_specific_args_t;
\endcode

\subsubsection subsubsecVOLRefObjopt object: optional
The <em>optional</em> callback in the object class implements connector specific operations on an HDF5 object.  It
returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*optional)(void *obj, const H5VL_loc_params_t *loc_params, H5VL_optional_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): A container or object where he operation needs to happen.
  loc_params (IN): Pointer to the location parameters for the destination object as explained in "Mapping the API to the Callbacks".
  args   (IN/OUT): A pointer to the arguments struct.
  dxpl_id    (IN): The data transfer property list.
  req     IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>
Each connector that requires connector-specific operations should compare the value of the <em>op_type</em> field of
the #H5VL_optional_args_t struct with the values returned from calling #H5VLregister_opt_operation to
determine how to handle the optional call and interpret the arguments passed in the struct.

\subsection subsecVOLRefIntrospect Introspection Callbacks
<em>Structure for VOL connector introspection callback routines, H5VLconnector.h</em>
\code
typedef struct H5VL_introspect_class_t {
    herr_t (*get_conn_cls)(void *obj, H5VL_get_conn_lvl_t lvl, const struct H5VL_class_t **conn_cls);
    herr_t (*get_cap_flags)(const void *info, uint64_t *cap_flags);
    herr_t (*opt_query)(void *obj, H5VL_subclass_t cls, int opt_type, uint64_t *flags);
} H5VL_introspect_class_t;
\endcode

\subsubsection subsubsecVOLRefIntrospectcls introspect: get_conn_cls
Get a connector's #H5VL_class_t struct.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*get_conn_cls)(void *obj, H5VL_get_conn_lvl_t lvl, const struct H5VL_class_t **conn_cls);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj  (IN): The VOL object.
  lvl  (IN): Current or terminal connector.
  cls (OUT): A const pointer to the connector.
\endcode
</td>
</tr>
</table>
<em>The "lvl" argument is an enum:</em>
\code
/* "Levels" for 'get connector class' introspection callback */
typedef enum H5VL_get_conn_lvl_t {
    H5VL_GET_CONN_LVL_CURR, /* Get "current" connector (for this object) */
    H5VL_GET_CONN_LVL_TERM  /* Get "terminal" connector (for this object) */
                            /* (Recursively called, for pass-through connectors) */
                            /* (Connectors that "split" must choose which connector to return) */
} H5VL_get_conn_lvl_t;
\endcode

\subsubsection subsubsecVOLRefIntrospecflags introspect: get_cap_flags
Get a connector's capability flags.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*get_cap_flags)(const void *info, unsigned *cap_flags)
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  info       (IN): A const pointer to pertinent VOL info.
  cap_flags (OUT): A pointer to capability flags.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefIntrospecquery introspect: opt_query
Query a class for a capability or functionality.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*opt_query)(void *obj, H5VL_subclass_t cls, int opt_type, hbool_t *supported);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): The VOL object.
  cls        (IN): The VOL 'class' to query.
  opt_type   (IN): The specific option to query.
  supported (OUT): Whether the operation is supported or not.
\endcode
</td>
</tr>
</table>
<em>The "cls" argument is an enum:</em>
\code
// Enum type for each VOL subclass
// (Used for various queries, etc)
typedef enum H5VL_subclass_t {
    H5VL_SUBCLS_NONE,     // Operations outside of a subclass
    H5VL_SUBCLS_INFO,     // 'Info' subclass
    H5VL_SUBCLS_WRAP,     // 'Wrap' subclass
    H5VL_SUBCLS_ATTR,     // 'Attribute' subclass
    H5VL_SUBCLS_DATASET,  // 'Dataset' subclass
    H5VL_SUBCLS_DATATYPE, // 'Named datatype' subclass
    H5VL_SUBCLS_FILE,     // 'File' subclass
    H5VL_SUBCLS_GROUP,    // 'Group' subclass
    H5VL_SUBCLS_LINK,     // 'Link' subclass
    H5VL_SUBCLS_OBJECT,   // 'Object' subclass
    H5VL_SUBCLS_REQUEST,  // 'Request' subclass
    H5VL_SUBCLS_BLOB,     // 'Blob' subclass
    H5VL_SUBCLS_TOKEN     // 'Token' subclass
} H5VL_subclass_t;
\endcode

\subsection subsecVOLRefReq Request (Async) Callbacks
<em>Structure for async request callback routines, H5VLconnector.h</em>
\code
typedef struct H5VL_request_class_t {
    herr_t (*wait)(void *req, uint64_t timeout, H5VL_request_status_t *status);
    herr_t (*notify)(void *req, H5VL_request_notify_t cb, void *ctx);
    herr_t (*cancel)(void *req, H5VL_request_status_t *status);
    herr_t (*specific)(void *req, H5VL_request_specific_args_t *args);
    herr_t (*optional)(void *req, H5VL_optional_args_t *args);
    herr_t (*free)(void *req);
} H5VL_request_class_t;
\endcode

\subsubsection subsubsecVOLRefReqwait request: wait
Wait (with a timeout) for an async operation to complete. Releases the request if the operation has completed
and the connector callback succeeds.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*wait)(void *req, uint64_t timeout, H5VL_request_status_t *status);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  req     (IN): The async request on which to wait.
  timeout (IN): The timeout value.
  status  (IN): The status.
\endcode
</td>
</tr>
</table>
<em>The "status" argument is an enum:</em>
\code
/* Status values for async request operations */
typedef enum H5VL_request_status_t {
    H5VL_REQUEST_STATUS_IN_PROGRESS, /* Operation has not yet completed                       */
    H5VL_REQUEST_STATUS_SUCCEED,     /* Operation has completed, successfully                 */
    H5VL_REQUEST_STATUS_FAIL,        /* Operation has completed, but failed                   */
    H5VL_REQUEST_STATUS_CANT_CANCEL, /* An attempt to cancel this operation was made, but it  */
                                     /*  can't be canceled immediately.  The operation has    */
                                     /*  not completed successfully or failed, and is not yet */
                                     /*  in progress.  Another attempt to cancel it may be    */
                                     /*  attempted and may (or may not) succeed.              */
    H5VL_REQUEST_STATUS_CANCELED     /* Operation has not completed and was canceled          */
} H5VL_request_status_t;
\endcode

\subsubsection subsubsecVOLRefReqnotify request: notify
Registers a user callback to be invoked when an asynchronous operation completes. Releases the request if
connector callback succeeds.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*notify)(void *req, H5VL_request_notify_t cb, void *ctx);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  req (IN): The async request that will receive the notify callback.
  cb  (IN): The notify callback for the request.
  ctx (IN): The request's context.
\endcode
</td>
</tr>
</table>
<em>The "cb" argument is an enum:</em>
\code
  typedef herr_t (*H5VL_request_notify_t)(void *ctx, H5ES_status_t status)
\endcode

\subsubsection subsubsecVOLRefReqcancel request: cancel
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*cancel)(void *req, H5VL_request_status_t *status);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  req    (IN): The async request to be cancelled.
  status (IN): The status.
\endcode
</td>
</tr>
</table>
<em>The "status" argument is an enum:</em>
\code
/* Status values for async request operations */
typedef enum H5VL_request_status_t {
    H5VL_REQUEST_STATUS_IN_PROGRESS, /* Operation has not yet completed                       */
    H5VL_REQUEST_STATUS_SUCCEED,     /* Operation has completed, successfully                 */
    H5VL_REQUEST_STATUS_FAIL,        /* Operation has completed, but failed                   */
    H5VL_REQUEST_STATUS_CANT_CANCEL, /* An attempt to cancel this operation was made, but it  */
                                     /*  can't be canceled immediately.  The operation has    */
                                     /*  not completed successfully or failed, and is not yet */
                                     /*  in progress.  Another attempt to cancel it may be    */
                                     /*  attempted and may (or may not) succeed.              */
    H5VL_REQUEST_STATUS_CANCELED     /* Operation has not completed and was canceled          */
} H5VL_request_status_t;
\endcode

\subsubsection subsubsecVOLRefReqspec request: specific
Perform a specific operation on an asynchronous request.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*specific)(void *req, H5VL_request_specific_args_t *args);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  req      (IN): The async request on which to perform the operation.
  args (IN/OUT): A pointer to the arguments struct.
\endcode
</td>
</tr>
</table>
\code
/* Values for async request 'specific' operation */
typedef enum H5VL_request_specific_t {
    H5VL_REQUEST_GET_ERR_STACK, /* Retrieve error stack for failed operation */
    H5VL_REQUEST_GET_EXEC_TIME  /* Retrieve execution time for operation */
} H5VL_request_specific_t;

/* Parameters for request 'specific' operations */
typedef struct H5VL_request_specific_args_t {
    H5VL_request_specific_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_REQUEST_GET_ERR_STACK */
        struct {
            hid_t err_stack_id; /* Error stack ID for operation (OUT) */
        } get_err_stack;

        /* H5VL_REQUEST_GET_EXEC_TIME */
        struct {
            uint64_t *exec_ts;   /* Timestamp for start of task execution (OUT) */
            uint64_t *exec_time; /* Duration of task execution (in ns) (OUT) */
        } get_exec_time;
    } args;
} H5VL_request_specific_args_t;
\endcode

\subsubsection subsubsecVOLRefReqopt request: optional
Perform a connector-specific operation for a request.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*optional)(void *req, H5VL_optional_args_t *args);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  req      (IN): The async request on which to perform the operation.
  args (IN/OUT): A pointer to the arguments struct.
\endcode
</td>
</tr>
</table>
Each connector that requires connector-specific operations should compare the value of the <em>op_type</em> field of
the #H5VL_optional_args_t struct with the values returned from calling #H5VLregister_opt_operation to
determine how to handle the optional call and interpret the arguments passed in the struct.

\subsubsection subsubsecVOLRefReqfree request: free
Frees an asynchronous request.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*free)(void *req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  req (IN): The async request to be freed.
\endcode
</td>
</tr>
</table>

\subsection subsecVOLRefBlob Blob Callbacks
<em>Structure for blob callback routines, H5VLconnector.h</em>
\code
typedef struct H5VL_blob_class_t {
    herr_t (*put)(void *obj, const void *buf, size_t size, void *blob_id, void *ctx);
    herr_t (*get)(void *obj, const void *blob_id, void *buf, size_t size, void *ctx);
    herr_t (*specific)(void *obj, void *blob_id, H5VL_blob_specific_args_t *args);
    herr_t (*optional)(void *obj, void *blob_id, H5VL_optional_args_t *args);
} H5VL_blob_class_t;
\endcode

\subsubsection subsubsecVOLRefBlobput blob: put
Put a blob through the VOL.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*put)(void *obj, const void *buf, size_t size, void *blob_id, void *ctx);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj      (IN): Pointer to the blob container.
  buf      (IN): Pointer to the blob.
  size     (IN): Size of the blob.
  blob_id (OUT): Pointer to the blob's connector-specific ID.
  ctx      (IN): Connector-specific blob context.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefBlobget blob: get
Get a blob through the VOL.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*get)(void *obj, const void *blob_id, void *buf, size_t size, void *ctx);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj     (IN): Pointer to the blob container.
  blob_id (IN): Pointer to the blob's connector-specific ID.
  buf (IN/OUT): Pointer to the blob.
  size    (IN): Size of the blob.
  ctx     (IN): Connector-specific blob context.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefBlobspec blob: specific
Perform a defined operation on a blob via the VOL.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*specific)(void *obj, void *blob_id, H5VL_blob_specific_args_t *args);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj      (IN): Pointer to the blob container.
  blob_id  (IN): Pointer to the blob's connector-specific ID.
  args (IN/OUT): A pointer to the arguments struct.
\endcode
</td>
</tr>
</table>
\code
/* Values for 'blob' 'specific' operation */
typedef enum H5VL_blob_specific_t {
    H5VL_BLOB_DELETE, /* Delete a blob (by ID) */
    H5VL_BLOB_ISNULL, /* Check if a blob ID is "null" */
    H5VL_BLOB_SETNULL /* Set a blob ID to the connector's "null" blob ID value */
} H5VL_blob_specific_t;

/* Parameters for blob 'specific' operations */
typedef struct H5VL_blob_specific_args_t {
    H5VL_blob_specific_t op_type; /* Operation to perform */

    /* Parameters for each operation */
    union {
        /* H5VL_BLOB_DELETE */
        /* No args */

        /* H5VL_BLOB_ISNULL */
        struct {
            hbool_t *isnull; /* Whether blob ID is "null" (OUT) */
        } is_null;

        /* H5VL_BLOB_SETNULL */
        /* No args */
    } args;
} H5VL_blob_specific_args_t;
\endcode

\subsubsection subsubsecVOLRefBlobopt blob: optional
Perform a connector-specific operation on a blob via the VOL
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*optional)(void *obj, void *blob_id, H5VL_optional_args_t *args);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj      (IN): Pointer to the blob container.
  blob_id  (IN): Pointer to the blob's connector-specific ID.
  args (IN/OUT): A pointer to the arguments struct.
\endcode
</td>
</tr>
</table>
Each connector that requires connector-specific operations should compare the value of the <em>op_type</em> field of
the #H5VL_optional_args_t struct with the values returned from calling #H5VLregister_opt_operation to
determine how to handle the optional call and interpret the arguments passed in the struct

\subsection subsecVOLRefToken Token Callbacks
<em>Structure for token callback routines, H5VLconnector.h</em>
\code
typedef struct H5VL_token_class_t {
    herr_t (*cmp)(void *obj, const H5O_token_t *token1, const H5O_token_t *token2, int *cmp_value);
    herr_t (*to_str)(void *obj, H5I_type_t obj_type, const H5O_token_t *token, char **token_str);
    herr_t (*from_str)(void *obj, H5I_type_t obj_type, const char *token_str, H5O_token_t *token);
} H5VL_token_class_t;
\endcode

\subsubsection subsubsecVOLRefTokencmp token: cmp
Compares two tokens and outputs a value like strcmp.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*cmp)(void *obj, const H5O_token_t *token1, const H5O_token_t *token2, int *cmp_value);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): The underlying VOL object.
  token1     (IN): The first token to compare.
  token2     (IN): The second token to compare.
  cmp_value (OUT): A value like strcmp.
\endcode
</td>
</tr>
</table>

\subsubsection subsubsecVOLRefTokento token: to_str
Converts a token to a string representation.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*to_str)(void *obj, H5I_type_t obj_type, const H5O_token_t *token, char **token_str)
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj        (IN): The underlying VOL object.
  obj_type   (IN): The type of the object.
  token      (IN): The token to turn into a string representation.
  token_str (OUT): The string representation of the token.
\endcode
</td>
</tr>
</table>
<em>The "obj_type" argument is an enum: (from H5Ipublic.h)</em>
\snippet H5Ipublic.h H5I_type_t_snip
The only values which should be used for this call are:
\li #H5I_GROUP
\li #H5I_DATATYPE
\li #H5I_DATASET
\li #H5I_MAP

as these are the only objects for which tokens are valid.

\subsubsection subsubsecVOLRefTokenfrom token: from_str
Converts a string representation of a token to a token.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*from_str)(void *obj, H5I_type_t obj_type, const char *token_str, H5O_token_t *token);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj       (IN): The underlying VOL object.
  obj_type  (IN): The type of the object.
  token_str (IN): The string representation of the token.
  token    (OUT): The token reated from the string representation.
\endcode
</td>
</tr>
</table>
<em>The "obj_type" argument is an enum: (from H5Ipublic.h)</em>
\snippet H5Ipublic.h H5I_type_t_snip
The only values which should be used for this call are:
\li #H5I_GROUP
\li #H5I_DATATYPE
\li #H5I_DATASET
\li #H5I_MAP

as these are the only objects for which tokens are valid.

\subsection subsecVOLRefOpt Optional Generic Callback
A <em>generic</em> optional callback is provided for services that are specific to a connector.
The <em>optional</em> callback has the following definition.  It returns an <em>herr_t</em> indicating success or failure.
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t (*optional)(void *obj, H5VL_optional_args_t *args, hid_t dxpl_id, void **req);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj      (IN): A container or object where he operation needs to happen.
  args (IN/OUT): A pointer to the arguments struct.
  dxpl_id  (IN): The data transfer property list.
  req   IN/OUT): A pointer to the asynchronous request of the operation created by the connector.
\endcode
</td>
</tr>
</table>

\section secVOLNew New VOL API Routines
API routines have been added to the HDF5 library to manage VOL connectors. This section details each
new API call and explains its intended usage. Additionally, a set of API calls that map directly to the VOL
callbacks themselves have been added to aid in the development of passthrough connectors which can be
stacked and/or split. A list of these API calls is given in an appendix.

\subsection subsecVOLNewPub H5VLpublic.h
The API calls in this header are for VOL management and general use (i.e., not limited to VOL connector authors).

\subsubsection subsubsecVOLNewPubregname H5VLregister_connector_by_name
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  hid_t H5VLregister_connector_by_name(const char *connector_name, hid_t vipl_id);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  connector_name (IN): The connector name to search for and register.
  vipl_id        (IN): An ID for a VOL initialization property list (vipl).
\endcode
</td>
</tr>
</table>
Registers a VOL connector with the HDF5 library given the name of the connector and returns an identifier
for it (#H5I_INVALID_HID on errors). If the connector is already registered, the library will create a new
identifier for it and returns it to the user; otherwise the library will search the plugin path for a connector
of that name, loading and registering it, returning an ID for it, if found. See the \ref H5VL_UG for more
information on loading plugins and the search paths.

\subsubsection subsubsecVOLNewPubregval H5VLregister_connector_by_value
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  hid_t H5VLregister_connector_by_value(H5VL_class_value_t connector_value, hid_t vipl_id);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  connector_value (IN): The connector value to search for and register.
  vipl_id         (IN): An ID for a VOL initialization property list (vipl).
\endcode
</td>
</tr>
</table>
Registers a VOL connector with the HDF5 library given a value for the connector and returns an identifier
for it (#H5I_INVALID_HID on errors). If the connector is already registered, the library will create a new
identifier for it and returns it to the user; otherwise the library will search the plugin path for a connector
of that name, loading and registering it, returning an ID for it, if found. See the VOL User Guide for more
information on loading plugins and the search paths.

\subsubsection subsubsecVOLNewPubis_name H5VLis_connector_registered_by_name
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  htri_t H5VLis_connector_registered_by_name(const char *name);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  name (IN): The connector name to check for.
\endcode
</td>
</tr>
</table>
Checks if a VOL connector is registered with the library given the connector name and returns TRUE/FALSE
on success, otherwise it returns a negative value.

\subsubsection subsubsecVOLNewPubis_value H5VLis_connector_registered_by_value
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  htri_t H5VLis_connector_registered_by_value(H5VL_class_value_t connector_value);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  connector_value (IN): The connector value to check for.
\endcode
</td>
</tr>
</table>
Checks if a VOL connector is registered with the library given the connector value and returns TRUE/FALSE
on success, otherwise it returns a negative value.

\subsubsection subsubsecVOLNewPubget_id H5VLget_connector_id
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  hid_t H5VLget_connector_id(hid_t obj_id);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj_id (IN): An ID for an HDF5 VOL object.
\endcode
</td>
</tr>
</table>
Given a VOL object such as a dataset or an attribute, this function returns an identifier for its associated
connector. If the ID is not a VOL object (such as a dataspace or uncommitted datatype), #H5I_INVALID_HID
is returned. The identifier must be released with a call to #H5VLclose.

\subsubsection subsubsecVOLNewPubget_by_name H5VLget_connector_id_by_name
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  hid_t H5VLget_connector_id_by_name(const char *name);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  name (IN): The connector name to check for.
\endcode
</td>
</tr>
</table>
Given a connector name that is registered with the library, this function returns an identifier for the connector.
If the connector is not registered with the library, #H5I_INVALID_HID is returned.The identifier must be
released with a call to #H5VLclose.

\subsubsection subsubsecVOLNewPubget_by_value H5VLget_connector_id_by_value
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  hid_t H5VLget_connector_id_by_value(H5VL_class_value_t connector_value);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  connector_value (IN): The connector value to check for.
\endcode
</td>
</tr>
</table>
Given a connector value that is registered with the library, this function returns an identifier for the connector.
If the connector is not registered with the library, #H5I_INVALID_HID is returned.The identifier must be
released with a call to #H5VLclose.

\subsubsection subsubsecVOLNewPubget_name H5VLget_connector_name
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  ssize_t H5VLget_connector_name(hid_t id, char *name /*out*/, size_t size);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  id    (IN): The object identifier to check.
  name (OUT): Buffer pointer to put the connector name. If NULL, the library just returns thesize required to store the connector name.
  size  (IN): the size of the passed in buffer.
\endcode
</td>
</tr>
</table>
Retrieves the name of a VOL connector given an object identifier that was created/opened  ith it. On
success, the name length is returned.

\subsubsection subsubsecVOLNewPubclose H5VLclose
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t H5VLclose(hid_t connector_id);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  connector_id (IN): A valid identifier of the connector to close.
\endcode
</td>
</tr>
</table>
Shuts down access to the connector that the identifier points to and release resources associated with it.

\subsubsection subsubsecVOLNewPubunreg H5VLunregister_connector
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t H5VLunregister_connector(hid_t connector_id);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  connector_id (IN): A valid identifier of the connector to unregister.
\endcode
</td>
</tr>
</table>
Unregisters a connector from the library and return a positive value on success otherwise return a negative
value. The native VOL connector cannot be unregistered (this will return a negative #herr_t value).

\subsubsection subsubsecVOLNewPubquery H5VLquery_optional
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t H5VLquery_optional(hid_t obj_id, H5VL_subclass_t subcls, int opt_type, uint64_t *flags);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj_id   (IN): A valid identifier of a VOL-managed object.
  subcls   (IN): The subclass of the optional operation.
  opt_type (IN): The optional operation. The native VOL connector uses hard-coded values. Other
                 VOL connectors get this value when the optional operations are registered.
  flags   (OUT): Bitwise flags indicating support and behavior.
\endcode
</td>
</tr>
</table>
Determines if a connector or connector stack (determined from the passed-in object) supports an optional
operation. The returned flags (listed below) not only indicate whether the operation is supported or not,
but also give a sense of the option's behavior (useful for pass-through connectors).

Bitwise query flag values:
\code
  #define H5VL_OPT_QUERY_SUPPORTED       0x0001 /* VOL connector supports this operation */
  #define H5VL_OPT_QUERY_READ_DATA       0x0002 /* Operation reads data for object */
  #define H5VL_OPT_QUERY_WRITE_DATA      0x0004 /* Operation writes data for object */
  #define H5VL_OPT_QUERY_QUERY_METADATA  0x0008 /* Operation reads metadata for object */
  #define H5VL_OPT_QUERY_MODIFY_METADATA 0x0010 /* Operation modifies metadata for object */
  #define H5VL_OPT_QUERY_COLLECTIVE      0x0020 /* Operation is collective (operations without this flag are assumed to be independent) */
  #define H5VL_OPT_QUERY_NO_ASYNC        0x0040 /* Operation may NOT be executed asynchronously */
  #define H5VL_OPT_QUERY_MULTI_OBJ       0x0080 /* Operation involves multiple objects */
\endcode

\subsection subsecVOLNewConn H5VLconnector.h
This functionality is intended for VOL connector authors and includes helper functions that are useful for
writing connectors.

API calls to manage optional operations are also found in this header file. These are discussed in the section
on optional operations, above.

\subsubsection subsubsecVOLNewConnreg H5VLregister_connector
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  hid_t H5VLregister_connector(const H5VL_class_t *cls, hid_t vipl_id);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  cls     (IN): A pointer to the connector structure to register.
  vipl_id (IN): An ID for a VOL initialization property list (vipl).
\endcode
</td>
</tr>
</table>
Registers a user-defined VOL connector with the HDF5 library and returns an identifier for that connector
(#H5I_INVALID_HID on errors). This function is used when the application has direct access to the connector
it wants to use and is able to obtain a pointer for the connector structure to pass to the HDF5 library.

\subsubsection subsubsecVOLNewConnobj H5VLobject
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  void *H5VLobject(hid_t obj_id);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj_id (IN): identifier of the object to dereference.
\endcode
</td>
</tr>
</table>
Retrieves a pointer to the VOL object from an HDF5 file or object identifier.

\subsubsection subsubsecVOLNewConnget H5VLget_file_type
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  hid_t H5VLget_file_type(void *file_obj, hid_t connector_id, hid_t dtype_id);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  file_obj     (IN): pointer to a file or file object's connector-specific data.
  connector_id (IN): A valid identifier of the connector to use.
  dtype_id     (IN): A valid identifier for the type.
\endcode
</td>
</tr>
</table>
Returns a copy of the <em>dtype_id</em> parameter but with the location set to be in the file. Returns a negative
value (#H5I_INVALID_HID) on errors.

\subsubsection subsubsecVOLNewConnpeek_name H5VLpeek_connector_id_by_name
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  hid_t H5VLpeek_connector_id_by_name(const char *name);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  name (IN): name of the connector to query.
\endcode
</td>
</tr>
</table>
Retrieves the ID for a registered VOL connector based on a connector name. This is done without duplicating
the ID and transferring ownership to the caller (as it normally the case in the HDF5 library). The ID returned
from this operation should not be closed. This is intended for use by VOL connectors to find their own ID.
Returns a negative value (#H5I_INVALID_HID) on errors.

\subsubsection subsubsecVOLNewConnpeek_value H5VLpeek_connector_id_by_value
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  hid_t H5VLpeek_connector_id_by_value(H5VL_class_value_t value);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  value (IN): value of the connector to query.
\endcode
</td>
</tr>
</table>
Retrieves the ID for a registered VOL connector based on a connector value. This is done without duplicating
the ID and transferring ownership to the caller (as it normally the case in the HDF5 library). The ID returned
from this operation should not be closed. This is intended for use by VOL connectors to find their own ID.
Returns a negative value (#H5I_INVALID_HID) on errors.

\subsection subsecVOLNewPass H5VLconnector_passthru.h
This functionality is intended for VOL connector authors who are writing pass-through connectors and
includes helper functions that are useful for writing such connectors. Callback equivalent functions can be
found in this header as well. A list of these functions is included as an appendix to this document.

\subsubsection subsubsecVOLNewPasscmp H5VLcmp_connector_cls
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t H5VLcmp_connector_cls(int *cmp, hid_t connector_id1, hid_t connector_id2);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  cmp          (OUT): a value like strcmp.
  connector_id1 (IN): the ID of the first connector to compare.
  connector_id2 (IN): the ID of the second connector to compare
\endcode
</td>
</tr>
</table>
Compares two connectors (given by the connector IDs) to see if they refer to the same connector underneath.
Returns a positive value on success and a negative value on errors.

\subsubsection subsubsecVOLNewPasswrap H5VLwrap_register
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  hid_t  H5VLwrap_register(void *obj, H5I_type_t type);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  obj  (IN): an object to wrap.
  type (IN): the type of the object (see below).
\endcode
</td>
</tr>
</table>
Wrap an internal object with a "wrap context" and register and return an hidt for the resulting object.
This routine is mainly targeted toward wrapping objects for iteration routine callbacks
(i.e. the callbacks from H5Aiterate*, H5Literate* / H5Lvisit*, and H5Ovisit* ). Using it in an application
will return an error indicating the API context isn't available or can't be retrieved.
he type must be a VOL-managed object class:
\li #H5I_FILE
\li #H5I_GROUP
\li #H5I_DATATYPE
\li #H5I_DATASET
\li #H5I_MAP
\li #H5I_ATTR

\subsubsection subsubsecVOLNewPassretrieve H5VLretrieve_lib_state
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t H5VLretrieve_lib_state(void **state);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  state (OUT): the library state.
\endcode
</td>
</tr>
</table>
Retrieves a copy of the internal state of the HDF5 library, so that it can be restored later. Returns a positive
value on success and a negative value on errors.

\subsubsection subsubsecVOLNewPassstar H5VLstart_lib_state
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t H5VLstart_lib_state(void);
\endcode
</td>
</tr>
</table>
Opens a new internal state for the HDF5 library. Returns a positive value on success and a negative value
on errors.

\subsubsection subsubsecVOLNewPassrestore H5VLrestore_lib_state
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t H5VLrestore_lib_state(const void *state);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  state (IN): the library state.
\endcode
</td>
</tr>
</table>
Restores the internal state of the HDF5 library. Returns a positive value on success and a negative value on errors.

\subsubsection subsubsecVOLNewPassfinish H5VLfinish_lib_state
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t H5VLfinish_lib_state(void);
\endcode
</td>
</tr>
</table>
Closes the state of the library, undoing the effects of #H5VLstart_lib_state. Returns a positive value on
success and a negative value on errors.

\subsubsection subsubsecVOLNewPassfree H5VLfree_lib_state
<table>
<tr>
<th>Signature:</th>
</tr>
<tr>
<td>
\code
  herr_t H5VLfree_lib_state(void *state);
\endcode
</td>
</tr>
<tr>
<th>Arguments:</th>
</tr>
<tr>
<td>
\code
  state (IN): the library state.
\endcode
</td>
</tr>
</table>
Free a retrieved library state.  Returns a positive value on success and a negative value on errors.

\section secVOLAppA Appendix A Mapping of VOL Callbacks to HDF5 API Calls
<table>
<tr>
<td>VOL Callback</td>
<td>HDF5 API Call</td>
</tr>
<tr>
<th colspan="2">FILE</th>
</tr>
<tr>
<td>create</td>
<td>\li #H5Fcreate</td>
</tr>
<tr>
<td>open</td>
<td>
\li #H5Fopen
</td>
</tr>
<tr>
<td>get</td>
<td>
\li #H5Fget_access_plist
\li #H5Fget_create_plist
\li #H5Fget_fileno
\li #H5Fget_intent
\li #H5Fget_name
\li #H5Fget_obj_count
\li #H5Fget_obj_ids
</td>
</tr>
<tr>
<td>specific</td>
<td>
\li #H5Fdelete
\li #H5Fflush
\li #H5Fis_accessible
\li #H5Fis_hdf5 (deprecated, hard-coded to use native connector)
\li #H5Freopen
</td>
</tr>
<tr>
<td>close</td>
<td>
\li #H5Fclose
</td>
</tr>
<tr>
<th colspan="2">GROUP</th>
</tr>
<tr>
<td>create</td>
<td>
\li #H5Gcreate1 (deprecated)
\li #H5Gcreate2
\li #H5Gcreate_anon
</td>
</tr>
<tr>
<td>open</td>
<td>
\li #H5Gopen1 (deprecated)
\li #H5Gopen2
</td>
</tr>
<tr>
<td>get</td>
<td>
\li #H5Gget_create_plist
\li #H5Gget_info
\li #H5Gget_info_by_idx
\li #H5Gget_info_by_name
\li #H5Gget_num_objs (deprecated)
</td>
</tr>
<tr>
<td>specific</td>
<td>
\li #H5Fmount
\li #H5Funmount
\li #H5Gflush
\li #H5Grefresh
</td>
</tr>
<tr>
<td>close</td>
<td>
\li #H5Gclose
</td>
</tr>
<tr>
<th colspan="2">DATASET</th>
</tr>
<tr>
<td>create</td>
<td>
\li #H5Dcreate1 (deprecated)
\li #H5Dcreate2
</td>
</tr>
<tr>
<td>open</td>
<td>
\li #H5Dopen1 (deprecated)
\li #H5Dopen2
</td>
</tr>
<tr>
<td>read</td>
<td>
\li #H5Dread
</td>
</tr>
<tr>
<td>write</td>
<td>
\li #H5Dwrite
</td>
</tr>
<tr>
<td>get</td>
<td>
\li #H5Dget_access_plist
\li #H5Dget_create_plist
\li #H5Dget_space
\li #H5Dget_space_status
\li #H5Dget_storage_size
\li #H5Dget_type
</td>
</tr>
<tr>
<td>specific</td>
<td>
\li #H5Dextend (deprecated)
\li #H5Dflush
\li #H5Drefresh
\li #H5Dset_extent
</td>
</tr>
<tr>
<td>close</td>
<td>
\li #H5Dclose
</td>
</tr>
<tr>
<th colspan="2">OBJECT</th>
</tr>
<tr>
<td>open</td>
<td>
\li #H5Oopen
\li #H5Oopen_by_addr (deprecated)
\li #H5Oopen_by_idx
\li #H5Oopen_by_token
</td>
</tr>
<tr>
<td>copy</td>
<td>
\li #H5Ocopy
</td>
</tr>
<tr>
<td>get</td>
<td>
\li #H5Oget_info1 (deprecated)
\li #H5Oget_info2 (deprecated)
\li #H5Oget_info3
</td>
</tr>
<tr>
<td>specific</td>
<td>
\li #H5Odecr_refcount
\li #H5Oexists_by_name
\li #H5Oflush
\li #H5Oincr_refcount
\li #H5Orefresh
\li #H5Ovisit_by_name1 (deprecated)
\li #H5Ovisit_by_name2 (deprecated)
\li #H5Ovisit_by_name3
\li #H5Ovisit1 (deprecated)
\li #H5Ovisit2 (deprecated)
\li #H5Ovisit3
</td>
</tr>
<tr>
<td>close</td>
<td>
\li #H5Oclose
</td>
</tr>
<tr>
<th colspan="2">LINK</th>
</tr>
<tr>
<td>create</td>
<td>
\li #H5Glink (deprecated)
\li #H5Glink2 (deprecated)
\li #H5Lcreate_hard
\li #H5Lcreate_soft
\li #H5Lcreate_ud
\li #H5Olink
</td>
</tr>
<tr>
<td>copy</td>
<td>
\li #H5Lcopy
</td>
</tr>
<tr>
<td>move</td>
<td>
\li #H5Gmove (deprecated)
\li #H5Gmove2 (deprecated)
\li #H5Lmove
</td>
</tr>
<tr>
<td>get</td>
<td>
\li #H5Gget_linkval (deprecated)
\li #H5Lget_info1 (deprecated)
\li #H5Lget_info2
\li #H5Lget_info_by_idx
\li #H5Lget_name_by_idx
\li #H5Lget_val
\li #H5Lget_val_by_idx
</td>
</tr>
<tr>
<td>specific</td>
<td>
\li #H5Gunlink (deprecated)
\li #H5Ldelete
\li #H5Ldelete_by_idx
\li #H5Lexists
\li #H5Literate1 (deprecated)
\li #H5Literate2
\li #H5Literate_by_name1 (deprecated)
\li #H5Literate_by_name2
\li #H5Lvisit1 (deprecated)
\li #H5Lvisit2
\li #H5Lvisit_by_name1 (deprecated)
\li #H5Lvisit_by_name2
</td>
</tr>
<tr>
<th colspan="2">DATATYPE</th>
</tr>
<tr>
<td>commit</td>
<td>
\li #H5Tcommit1 (deprecated)
\li #H5Tcommit2
\li #H5Tcommit+anon
</td>
</tr>
<tr>
<td>open</td>
<td>
\li #H5Topen1 (deprecated)
\li #H5Topen2
</td>
</tr>
<tr>
<td>get</td>
<td>
\li #H5Tget_create_plist
</td>
</tr>
<tr>
<td>specific</td>
<td>
\li #H5Tflush
\li #H5Trefresh
</td>
</tr>
<tr>
<td>close</td>
<td>
\li #H5Tclose
</td>
</tr>
<tr>
<th colspan="2">ATTRIBUTE</th>
</tr>
<tr>
<td>create</td>
<td>
\li #H5Acreate1 (deprecated)
\li #H5Acreate2
\li #H5Acreate_by_name
</td>
</tr>
<tr>
<td>open</td>
<td>
\li #H5Aopen
\li #H5Aopen_by_idx
\li #H5Aopen_by_name
\li #H5Aopen_idx (deprecated)
\li #H5Aopen_name (deprecated)
</td>
</tr>
<tr>
<td>read</td>
<td>
\li #H5Aread
</td>
</tr>
<tr>
<td>write</td>
<td>
\li #H5Awrite
</td>
</tr>
<tr>
<td>get</td>
<td>
\li #H5Aget_create_plist
\li #H5Aget_info
\li #H5Aget_info_by_idx
\li #H5Aget_info_by_name
\li #H5Aget_name
\li #H5Aget_name_by_idx
\li #H5Aget_space
\li #H5Aget_storage_size
\li #H5Aget_type
</td>
</tr>
<tr>
<td>specific</td>
<td>
\li #H5Adelete
\li #H5Adelete_by_idx
\li #H5Adelete_by_name
\li #H5Aexists
\li #H5Aexists_by_name
\li #H5Aiterate1 (deprecated)
\li #H5Aiterate2
\li #H5Aiterate_by_name
\li #H5Arename
\li #H5Arename_by_name
</td>
</tr>
<tr>
<td>close</td>
<td>
\li #H5Aclose
</td>
</tr>
</table>

\section secVOLAppB Appendix B Callback Wrapper API Calls for Passthrough Connector Authors
\code
/* Pass-through callbacks */
H5_DLL void  *H5VLget_object(void *obj, hid_t connector_id);
H5_DLL herr_t H5VLget_wrap_ctx(void *obj, hid_t connector_id, void **wrap_ctx);
H5_DLL void  *H5VLwrap_object(void *obj, H5I_type_t obj_type, hid_t connector_id, void *wrap_ctx);
H5_DLL void  *H5VLunwrap_object(void *obj, hid_t connector_id);
H5_DLL herr_t H5VLfree_wrap_ctx(void *wrap_ctx, hid_t connector_id);

/* Public wrappers for generic callbacks */
H5_DLL herr_t H5VLinitialize(hid_t connector_id, hid_t vipl_id);
H5_DLL herr_t H5VLterminate(hid_t connector_id);
H5_DLL herr_t H5VLget_cap_flags(hid_t connector_id, uint64_t *cap_flags);
H5_DLL herr_t H5VLget_value(hid_t connector_id, H5VL_class_value_t *conn_value);

/* Public wrappers for info fields and callbacks */
H5_DLL herr_t H5VLcopy_connector_info(hid_t connector_id, void **dst_vol_info, void *src_vol_info);
H5_DLL herr_t H5VLcmp_connector_info(int *cmp, hid_t connector_id, const void *info1, const void *info2);
H5_DLL herr_t H5VLfree_connector_info(hid_t connector_id, void *vol_info);
H5_DLL herr_t H5VLconnector_info_to_str(const void *info, hid_t connector_id, char **str);
H5_DLL herr_t H5VLconnector_str_to_info(const char *str, hid_t connector_id, void **info);

/* Public wrappers for attribute callbacks */
H5_DLL void  *H5VLattr_create(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                              const char *attr_name, hid_t type_id, hid_t space_id, hid_t acpl_id,
                              hid_t aapl_id, hid_t dxpl_id, void **req);
H5_DLL void  *H5VLattr_open(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                            const char *name, hid_t aapl_id, hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLattr_read(void *attr, hid_t connector_id, hid_t dtype_id, void *buf, hid_t dxpl_id,
                            void **req);
H5_DLL herr_t H5VLattr_write(void *attr, hid_t connector_id, hid_t dtype_id, const void *buf, hid_t dxpl_id,
                             void **req);
H5_DLL herr_t H5VLattr_get(void *obj, hid_t connector_id, H5VL_attr_get_args_t *args, hid_t dxpl_id,
                           void **req);
H5_DLL herr_t H5VLattr_specific(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                                H5VL_attr_specific_args_t *args, hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLattr_optional(void *obj, hid_t connector_id, H5VL_optional_args_t *args, hid_t dxpl_id,
                                void **req);
H5_DLL herr_t H5VLattr_close(void *attr, hid_t connector_id, hid_t dxpl_id, void **req);

/* Public wrappers for dataset callbacks */
H5_DLL void  *H5VLdataset_create(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                                 const char *name, hid_t lcpl_id, hid_t type_id, hid_t space_id, hid_t dcpl_id,
                                 hid_t dapl_id, hid_t dxpl_id, void **req);
H5_DLL void  *H5VLdataset_open(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                               const char *name, hid_t dapl_id, hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLdataset_read(size_t count, void *dset[], hid_t connector_id, hid_t mem_type_id[],
                               hid_t mem_space_id[], hid_t file_space_id[], hid_t plist_id, void *buf[],
                               void **req);
H5_DLL herr_t H5VLdataset_write(size_t count, void *dset[], hid_t connector_id, hid_t mem_type_id[],
                                hid_t mem_space_id[], hid_t file_space_id[], hid_t plist_id,
                                const void *buf[], void **req);
H5_DLL herr_t H5VLdataset_get(void *dset, hid_t connector_id, H5VL_dataset_get_args_t *args, hid_t dxpl_id,
                              void **req);
H5_DLL herr_t H5VLdataset_specific(void *obj, hid_t connector_id, H5VL_dataset_specific_args_t *args,
                                   hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLdataset_optional(void *obj, hid_t connector_id, H5VL_optional_args_t *args, hid_t dxpl_id,
                                   void **req);
H5_DLL herr_t H5VLdataset_close(void *dset, hid_t connector_id, hid_t dxpl_id, void **req);

/* Public wrappers for named datatype callbacks */
H5_DLL void  *H5VLdatatype_commit(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                                  const char *name, hid_t type_id, hid_t lcpl_id, hid_t tcpl_id, hid_t tapl_id,
                                  hid_t dxpl_id, void **req);
H5_DLL void  *H5VLdatatype_open(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                                const char *name, hid_t tapl_id, hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLdatatype_get(void *dt, hid_t connector_id, H5VL_datatype_get_args_t *args, hid_t dxpl_id,
                               void **req);
H5_DLL herr_t H5VLdatatype_specific(void *obj, hid_t connector_id, H5VL_datatype_specific_args_t *args,
                                    hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLdatatype_optional(void *obj, hid_t connector_id, H5VL_optional_args_t *args, hid_t dxpl_id,
                                    void **req);
H5_DLL herr_t H5VLdatatype_close(void *dt, hid_t connector_id, hid_t dxpl_id, void **req);

/* Public wrappers for file callbacks */
H5_DLL void  *H5VLfile_create(const char *name, unsigned flags, hid_t fcpl_id, hid_t fapl_id, hid_t dxpl_id,
                              void **req);
H5_DLL void  *H5VLfile_open(const char *name, unsigned flags, hid_t fapl_id, hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLfile_get(void *file, hid_t connector_id, H5VL_file_get_args_t *args, hid_t dxpl_id,
                           void **req);
H5_DLL herr_t H5VLfile_specific(void *obj, hid_t connector_id, H5VL_file_specific_args_t *args, hid_t dxpl_id,
                                void **req);
H5_DLL herr_t H5VLfile_optional(void *obj, hid_t connector_id, H5VL_optional_args_t *args, hid_t dxpl_id,
                                void **req);
H5_DLL herr_t H5VLfile_close(void *file, hid_t connector_id, hid_t dxpl_id, void **req);

/* Public wrappers for group callbacks */
H5_DLL void  *H5VLgroup_create(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                               const char *name, hid_t lcpl_id, hid_t gcpl_id, hid_t gapl_id, hid_t dxpl_id,
                               void **req);
H5_DLL void  *H5VLgroup_open(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                             const char *name, hid_t gapl_id, hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLgroup_get(void *obj, hid_t connector_id, H5VL_group_get_args_t *args, hid_t dxpl_id,
                            void **req);
H5_DLL herr_t H5VLgroup_specific(void *obj, hid_t connector_id, H5VL_group_specific_args_t *args,
                                 hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLgroup_optional(void *obj, hid_t connector_id, H5VL_optional_args_t *args, hid_t dxpl_id,
                                 void **req);
H5_DLL herr_t H5VLgroup_close(void *grp, hid_t connector_id, hid_t dxpl_id, void **req);

/* Public wrappers for link callbacks */
H5_DLL herr_t H5VLlink_create(H5VL_link_create_args_t *args, void *obj, const H5VL_loc_params_t *loc_params,
                              hid_t connector_id, hid_t lcpl_id, hid_t lapl_id, hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLlink_copy(void *src_obj, const H5VL_loc_params_t *loc_params1, void *dst_obj,
                            const H5VL_loc_params_t *loc_params2, hid_t connector_id, hid_t lcpl_id,
                            hid_t lapl_id, hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLlink_move(void *src_obj, const H5VL_loc_params_t *loc_params1, void *dst_obj,
                            const H5VL_loc_params_t *loc_params2, hid_t connector_id, hid_t lcpl_id,
                            hid_t lapl_id, hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLlink_get(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                           H5VL_link_get_args_t *args, hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLlink_specific(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                                H5VL_link_specific_args_t *args, hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLlink_optional(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                                H5VL_optional_args_t *args, hid_t dxpl_id, void **req);

/* Public wrappers for object callbacks */
H5_DLL void  *H5VLobject_open(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                              H5I_type_t *opened_type, hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLobject_copy(void *src_obj, const H5VL_loc_params_t *loc_params1, const char *src_name,
                              void *dst_obj, const H5VL_loc_params_t *loc_params2, const char *dst_name,
                              hid_t connector_id, hid_t ocpypl_id, hid_t lcpl_id, hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLobject_get(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                             H5VL_object_get_args_t *args, hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLobject_specific(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                                  H5VL_object_specific_args_t *args, hid_t dxpl_id, void **req);
H5_DLL herr_t H5VLobject_optional(void *obj, const H5VL_loc_params_t *loc_params, hid_t connector_id,
                                  H5VL_optional_args_t *args, hid_t dxpl_id, void **req);

/* Public wrappers for connector/container introspection callbacks */
H5_DLL herr_t H5VLintrospect_get_conn_cls(void *obj, hid_t connector_id, H5VL_get_conn_lvl_t lvl,
                                          const H5VL_class_t **conn_cls);
H5_DLL herr_t H5VLintrospect_get_cap_flags(const void *info, hid_t connector_id, uint64_t *cap_flags);
H5_DLL herr_t H5VLintrospect_opt_query(void *obj, hid_t connector_id, H5VL_subclass_t subcls, int opt_type,
                                       uint64_t *flags);

/* Public wrappers for asynchronous request callbacks */
H5_DLL herr_t H5VLrequest_wait(void *req, hid_t connector_id, uint64_t timeout,
                               H5VL_request_status_t *status);
H5_DLL herr_t H5VLrequest_notify(void *req, hid_t connector_id, H5VL_request_notify_t cb, void *ctx);
H5_DLL herr_t H5VLrequest_cancel(void *req, hid_t connector_id, H5VL_request_status_t *status);
H5_DLL herr_t H5VLrequest_specific(void *req, hid_t connector_id, H5VL_request_specific_args_t *args);
H5_DLL herr_t H5VLrequest_optional(void *req, hid_t connector_id, H5VL_optional_args_t *args);
H5_DLL herr_t H5VLrequest_free(void *req, hid_t connector_id);

/* Public wrappers for blob callbacks */
H5_DLL herr_t H5VLblob_put(void *obj, hid_t connector_id, const void *buf, size_t size, void *blob_id,
                           void *ctx);
H5_DLL herr_t H5VLblob_get(void *obj, hid_t connector_id, const void *blob_id, void *buf, size_t size,
                           void *ctx);
H5_DLL herr_t H5VLblob_specific(void *obj, hid_t connector_id, void *blob_id,
                                H5VL_blob_specific_args_t *args);
H5_DLL herr_t H5VLblob_optional(void *obj, hid_t connector_id, void *blob_id, H5VL_optional_args_t *args);

/* Public wrappers for token callbacks */
H5_DLL herr_t H5VLtoken_cmp(void *obj, hid_t connector_id, const H5O_token_t *token1,
                            const H5O_token_t *token2, int *cmp_value);
H5_DLL herr_t H5VLtoken_to_str(void *obj, H5I_type_t obj_type, hid_t connector_id, const H5O_token_t *token,
                               char **token_str);
H5_DLL herr_t H5VLtoken_from_str(void *obj, H5I_type_t obj_type, hid_t connector_id, const char *token_str,
                                 H5O_token_t *token);

/* Public wrappers for generic 'optional' callback */
H5_DLL herr_t H5VLoptional(void *obj, hid_t connector_id, H5VL_optional_args_t *args, hid_t dxpl_id,
                           void **req);
\endcode

\section secVOLAppC Appendix C Native VOL Connector Optional Values By Subclass
\code
/* H5VL_SUBCLS_ATTR */
#define H5VL_NATIVE_ATTR_ITERATE_OLD 0 /* H5Aiterate (deprecated routine) */

/* H5VL_SUBCLS_DATASET */
#define H5VL_NATIVE_DATASET_FORMAT_CONVERT          0  /* H5Dformat_convert (internal) */
#define H5VL_NATIVE_DATASET_GET_CHUNK_INDEX_TYPE    1  /* H5Dget_chunk_index_type      */
#define H5VL_NATIVE_DATASET_GET_CHUNK_STORAGE_SIZE  2  /* H5Dget_chunk_storage_size    */
#define H5VL_NATIVE_DATASET_GET_NUM_CHUNKS          3  /* H5Dget_num_chunks            */
#define H5VL_NATIVE_DATASET_GET_CHUNK_INFO_BY_IDX   4  /* H5Dget_chunk_info            */
#define H5VL_NATIVE_DATASET_GET_CHUNK_INFO_BY_COORD 5  /* H5Dget_chunk_info_by_coord   */
#define H5VL_NATIVE_DATASET_CHUNK_READ              6  /* H5Dchunk_read                */
#define H5VL_NATIVE_DATASET_CHUNK_WRITE             7  /* H5Dchunk_write               */
#define H5VL_NATIVE_DATASET_GET_VLEN_BUF_SIZE       8  /* H5Dvlen_get_buf_size         */
#define H5VL_NATIVE_DATASET_GET_OFFSET              9  /* H5Dget_offset                */
#define H5VL_NATIVE_DATASET_CHUNK_ITER              10 /* H5Dchunk_iter                */

/* H5VL_SUBCLS_FILE */
#define H5VL_NATIVE_FILE_CLEAR_ELINK_CACHE            0  /* H5Fclear_elink_file_cache            */
#define H5VL_NATIVE_FILE_GET_FILE_IMAGE               1  /* H5Fget_file_image                    */
#define H5VL_NATIVE_FILE_GET_FREE_SECTIONS            2  /* H5Fget_free_sections                 */
#define H5VL_NATIVE_FILE_GET_FREE_SPACE               3  /* H5Fget_freespace                     */
#define H5VL_NATIVE_FILE_GET_INFO                     4  /* H5Fget_info1/2                       */
#define H5VL_NATIVE_FILE_GET_MDC_CONF                 5  /* H5Fget_mdc_config                    */
#define H5VL_NATIVE_FILE_GET_MDC_HR                   6  /* H5Fget_mdc_hit_rate                  */
#define H5VL_NATIVE_FILE_GET_MDC_SIZE                 7  /* H5Fget_mdc_size                      */
#define H5VL_NATIVE_FILE_GET_SIZE                     8  /* H5Fget_filesize                      */
#define H5VL_NATIVE_FILE_GET_VFD_HANDLE               9  /* H5Fget_vfd_handle                    */
#define H5VL_NATIVE_FILE_RESET_MDC_HIT_RATE           10 /* H5Freset_mdc_hit_rate_stats          */
#define H5VL_NATIVE_FILE_SET_MDC_CONFIG               11 /* H5Fset_mdc_config                    */
#define H5VL_NATIVE_FILE_GET_METADATA_READ_RETRY_INFO 12 /* H5Fget_metadata_read_retry_info      */
#define H5VL_NATIVE_FILE_START_SWMR_WRITE             13 /* H5Fstart_swmr_write                  */
#define H5VL_NATIVE_FILE_START_MDC_LOGGING            14 /* H5Fstart_mdc_logging                 */
#define H5VL_NATIVE_FILE_STOP_MDC_LOGGING             15 /* H5Fstop_mdc_logging                  */
#define H5VL_NATIVE_FILE_GET_MDC_LOGGING_STATUS       16 /* H5Fget_mdc_logging_status            */
#define H5VL_NATIVE_FILE_FORMAT_CONVERT               17 /* H5Fformat_convert                    */
#define H5VL_NATIVE_FILE_RESET_PAGE_BUFFERING_STATS   18 /* H5Freset_page_buffering_stats        */
#define H5VL_NATIVE_FILE_GET_PAGE_BUFFERING_STATS     19 /* H5Fget_page_buffering_stats          */
#define H5VL_NATIVE_FILE_GET_MDC_IMAGE_INFO           20 /* H5Fget_mdc_image_info                */
#define H5VL_NATIVE_FILE_GET_EOA                      21 /* H5Fget_eoa                           */
#define H5VL_NATIVE_FILE_INCR_FILESIZE                22 /* H5Fincrement_filesize                */
#define H5VL_NATIVE_FILE_SET_LIBVER_BOUNDS            23 /* H5Fset_latest_format/libver_bounds   */
#define H5VL_NATIVE_FILE_GET_MIN_DSET_OHDR_FLAG       24 /* H5Fget_dset_no_attrs_hint            */
#define H5VL_NATIVE_FILE_SET_MIN_DSET_OHDR_FLAG       25 /* H5Fset_dset_no_attrs_hint            */
#ifdef H5_HAVE_PARALLEL
#define H5VL_NATIVE_FILE_GET_MPI_ATOMICITY 26 /* H5Fget_mpi_atomicity                 */
#define H5VL_NATIVE_FILE_SET_MPI_ATOMICITY 27 /* H5Fset_mpi_atomicity                 */
#endif
#define H5VL_NATIVE_FILE_POST_OPEN 28 /* Adjust file after open, with wrapping context */

/* H5VL_SUBCLS_GROUP */
#define H5VL_NATIVE_GROUP_ITERATE_OLD 0 /* HG5Giterate (deprecated routine) */
#define H5VL_NATIVE_GROUP_GET_OBJINFO 1 /* HG5Gget_objinfo (deprecated routine) */

/* H5VL_SUBCLS_OBJECT */
#define H5VL_NATIVE_OBJECT_GET_COMMENT              0 /* H5G|H5Oget_comment, H5Oget_comment_by_name   */
#define H5VL_NATIVE_OBJECT_SET_COMMENT              1 /* H5G|H5Oset_comment, H5Oset_comment_by_name   */
#define H5VL_NATIVE_OBJECT_DISABLE_MDC_FLUSHES      2 /* H5Odisable_mdc_flushes                       */
#define H5VL_NATIVE_OBJECT_ENABLE_MDC_FLUSHES       3 /* H5Oenable_mdc_flushes                        */
#define H5VL_NATIVE_OBJECT_ARE_MDC_FLUSHES_DISABLED 4 /* H5Oare_mdc_flushes_disabled                  */
#define H5VL_NATIVE_OBJECT_GET_NATIVE_INFO          5 /* H5Oget_native_info(_by_idx, _by_name)        */
\endcode

<hr>
Navigate back: \ref index "Main" / \ref VOL_Connector
*/