path: root/release_docs/HISTORY-1_8.txt

HDF5 History
============

This file contains development history of HDF5 1.8 branch

4.      Release Information for hdf5-1.8.3
3.      Release Information for hdf5-1.8.2
2.      Release Information for hdf5-1.8.1
1.      Release Information for hdf5-1.8.0

[Search on the string '%%%%' for per-release section breaks.]


%%%%1.8.3%%%%   


HDF5 version 1.8.3 released on Mon May  4 09:21:00 CDT 2009
================================================================================

INTRODUCTION
============

This document describes the differences between HDF5-1.8.2 and 
HDF5 1.8.3, and contains information on the platforms tested and 
known problems in HDF5-1.8.3. 
For more details, see the files HISTORY-1_0-1_8_0_rc3.txt 
and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source.

Links to the HDF5 1.8.3 source code, documentation, and additional materials
can be found on the HDF5 web page at:

     http://www.hdfgroup.org/products/hdf5/

The HDF5 1.8.3 release can be obtained from:

     http://www.hdfgroup.org/HDF5/release/obtain5.html

User documentation for 1.8.3 can be accessed directly at this location: 

     http://www.hdfgroup.org/HDF5/doc/

New features in the HDF5-1.8.x release series, including brief general 
descriptions of some new and modified APIs, are described in the "What's New 
in 1.8.0?" document:

     http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html

All new and modified APIs are listed in detail in the "HDF5 Software Changes 
from Release to Release" document, in the section "Release 1.8.3 (current 
release) versus Release 1.8.2":

     http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

If you have any questions or comments, please send them to the HDF Help Desk:

     help@hdfgroup.org


CONTENTS
========

- New Features
- Support for New Platforms, Languages, and Compilers
- Bug Fixes since HDF5-1.8.2
- Platforms Tested
- Supported Configuration Features Summary
- Known Problems


New Features
============

    Configuration
    -------------
    - Added libtool version numbers to generated c++, fortran, and 
      hl libraries. MAM 2009/04/19.
    - Regenerated Makefile.ins using Automake 1.10.2. MAM 2009/04/19.
    - Added a Make target of check-all-install to test the correctness of
      installing via the prefix= or $DESTDIR options. AKC - 2009/04/14

    Library
    -------
    - Embed the content of libhdf5.settings into the hdf5 executables
      so that an "orphaned" executables can display (via the Unix
      strings command, for example) the library settings used to build
      the executables.  This is a prototype implementation. Improvement will
      be added in next release.  AKC - 2009/04/20
    - Separated "factory" free list class from block free lists. These free
      lists are dynamically created and manage blocks of a fixed size.
      H5set_free_list_limits() will use the same settings specified for block
      free lists for factory free lists. NAF - 2009/04/08
    - Added support for dense attributes to H5Ocopy. XCao/NAF - 2009/01/29
    - Added H5Pset_elink_cb and H5Pget_elink_cb functions to support a
      user-defined callback function for external link traversal.
      NAF - 2009/01/08
    - Added H5Pset_elink_acc_flags and H5Pget_elink_acc_flags functions to
      allow the user to specify the file access flags used to open the target
      file of an external link. NAF - 2009/01/08
    - Added H5Pset_chunk_cache() and H5Pget_chunk_cache() functions to allow
      individual rdcc configuration for each dataset.  Added
      H5Dget_access_plist() function to retrieve a dataset access property
      list from a dataset. NAF - 2008/11/12
    - Added H5Iis_valid() function to check if an id is valid without
      producing an error message. NAF - 2008/11/5
    - Added code to maintain a min_clean_fraction in the metadata cache when
      in serial mode. MAM - 2009/01/9

    Parallel Library
    ----------------
    - Modified parallel tests to run with arbitrary number of processes. The
      modified tests are testphdf5 (parallel dataset access), t_chunk_alloc
      (chunk allocation), and t_posix_compliant (posix compliance). The rest of
      the parallel tests already use in the code the number of processes
      available in the communicator. (CMC - 2009/04/28)
 
    Tools
    -----
    - h5diff new flag, -c, --compare, list objects that are not comparable.
      PVN - 2009/4/2 - 1368
    - h5diff new flag, -N, --nan, avoids NaNs detection. PVN - 2009/4/2
    - h5dump correctly specifies XML dtd / schema urls ADB - 2009/4/3 - 1519
    - h5repack now handles group creation order. PVN - 2009/4/2 - 1402
    - h5repack: When user doesn't specify a chunk size, h5repack now 
      defines a default chunk size as the same size of the size of the 
      hyperslab used to read the chunks. The size of the hyperslabs are 
      defined as the size of each dimension or a predefined constant, 
      whatever is smaller. This assures that the chunk read fits in the 
      chunk cache. PVN - 2008/11/21

    High-Level APIs
    ---------------
    - Table: In version 3.0 of Table, the writing of the "NROWS" attribute 
      (used to store number of records) was deprecated. PVN - 2008/11/24

    F90 API
    -------
    - Added for the C APIs the Fortran wrappers:
          h5dget_access_plist_f
          h5iis_valid_f
          h5pset_chunk_cache_f
          h5pget_chunk_cache_f
      MSB - 2009/04/17

    C++ API
    -------
    - None


Support for New Platforms, Languages, and Compilers
===================================================


Bug Fixes since HDF5-1.8.2
==========================

    Configuration
    -------------
    - The --includedir=DIR configuration option now works as intended, and 
      can be used to specify the location to install C header files. The
      default location remains unchanged, residing at ${prefix}/include.
      MAM - 2009/03/10 - BZ #1381
    - Configure no longer removes the '-g' flag from CFLAGS when in production
      mode if it has been explicitly set in the CFLAGS environment variable 
      prior to configuration. MAM - 2009/03/09 - BZ #1401

    Library
    -------
    - Added versioning to H5Z_class_t struct to allow compatibility with 1.6
      API. NAF - 2009/04/20 - 1533
    - Fixed a problem with using data transforms with non-native types in the
      file. NAF - 2009/04/20 - 1548
    - Added direct.h include file to windows section of H5private.h 
      to fix _getcwd() warning. ADB - 2009/04/14 - 1536
    - Fixed a bug that prevented external links from working after calling
      H5close(). NAF - 2009/04/10 - 1539
    - Modified library to write cached symbol table information to the
      superblock, to allow library versions 1.3.0 to 1.6.3 to read files created
      by this version. NAF - 2009/04/08 - 1423
    - Changed skip lists to use a deterministic algorithm.  The library should
      now never call rand() or srand(). NAF - 2009/04/08 - 503
    - Fixed a bug where H5Lcopy and H5Lmove wouldn't create intermediate groups
      when that property was set. NAF - 2009/04/07 - 1526
    - Fixed a bug that caused files with a user block to grow by the size of the
      user block every time they were opened. NAF - 2009/03/26 - 1499
    - Fixed a rare problem that could occur with files using the old (pre 1.4)
      array datatype. NAF - 2009/03/23
    - Modified library to be able to open files with corrupt root group symbol
      table messages, and correct these errors if they are found.  Such files
      can only be successfully opened with write access. NAF - 2009/03/23 - 1189
    - Removed the long_long #define and replaced all instances with 
      "long long". This caused problems with third party products. All 
      currently supported compliers support the type. ADB - 2009/03/05
    - Fixed various bugs that could prevent the fill value from being written
      in certain rare cases. NAF - 2009/02/26 - 1469
    - Fixed a bug that prevented more than one dataset chunk from being cached
      at a time. NAF - 2009/02/12 - 1015
    - Fixed an assertion failure caused by opening an attribute multiple times
      through multiple file handles. NAF - 2009/02/12 - 1420
    - Fixed a problem that could prevent the user from adding attributes (or any
      object header message) in some circumstances. NAF - 2009/02/12 - 1427
    - Fixed a bug that could cause problems when an attribute was added to a
      committed datatype using the committed datatype's datatype.
      NAF - 2009/02/12
    - Fixed a bug that could cause problems when copying an object with a shared
      message in its own object header. NAF - 2009/01/29
    - Changed H5Tset_order to properly reject H5T_ORDER_NONE for most datatypes.
      NAF - 2009/01/27 - 1443
    - Fixed a bug where H5Tpack wouldn't remove trailing space from an otherwise
      packed compound type. NAF - 2009/01/14
    - Fixed up some old v2 btree assertions that get run in debug mode that
      were previously failing on compilation, and removed some of the 
      more heavily outdated and non-rewritable ones. MAM - 2008/12/15
    - Fixed a bug that could cause problems when "automatically" unmounting
      multiple files. NAF - 2008/11/17
    - H5Dset_extent: when shrinking dimensions, some chunks were not deleted.  
      PVN - 2009/01/8 

    Parallel Library
    ----------------
    - None

    Tools
    -----
    - Fixed many problems that could occur when using h5repack with named
      datatypes. NAF - 2009/4/20 - 1516/1466
    - h5dump, h5diff, h5repack were not reading (by hyperslabs) datasets 
      that have a datatype datum size greater than H5TOOLS_BUFSIZE, a constant
      defined as 1024Kb, such as array types with large dimensions. 
      PVN - 2009/4/1 - 1501
    - h5import: By selecting a compression type, a big endian byte order 
      was being selected. PVN - 2009/3/11 - 1462
    - zip_perf.c had missing argument on one of the open() calls. Fixed.
      AKC - 2008/12/9

    F90 API
    ------
    - None

    C++ API
    ------
    - None

    High-Level APIs:
    ------
    - Dimension scales: The scale index return value in H5DSiterate_scales 
      was not always incremented. PVN - 2009/4/8 - 1538

    Fortran High-Level APIs:
    ------
    - Lite: The h5ltget_dataset_info_f function (gets information about 
      a dataset) was not correctly returning the dimension array 
                                   PVN - 2009/3/23


Platforms Tested
================
The following platforms and compilers have been tested for this release.

    AIX 5.3                       xlc 7.0.0.8
    (LLNL Up)                     xlf 09.01.0000.0008
                                  xlC 7.0.0.8
                                  mpcc_r 7.0.0.8
                                  mpxlf_r 09.01.0000.0008

    Cray XT3 (2.0.41)             cc (pgcc) 7.1-4
    (SNL red storm)               ftn (pgf90) 7.1-4
                                  CC (pgCC) 7.1-4

    FreeBSD 6.3-STABLE i386       gcc 3.4.6 [FreeBSD] 20060305
    (duty)                        g++ 3.4.6 [FreeBSD] 20060305
                                  gcc 4.3.4 20090419
                                  g++ 4.3.4 20090419
                                  gfortran 4.3.4 20090419

    FreeBSD 6.3-STABLE amd64      gcc 3.4.6 [FreeBSD] 20060305
    (liberty)                     g++ 3.4.6 [FreeBSD] 20060305
                                  gcc 4.4.1 20090421
                                  g++ 4.4.1 20090421
                                  gfortran 4.4.1 20090421

    IRIX64 6.5 (64 & n32)         MIPSpro cc 7.4.4m
                                  F90 MIPSpro 7.4.4m 
                                  C++ MIPSpro cc 7.4.4m

    Linux 2.6.18-128.1.6.el5xen   gcc (GCC) 4.1.2
    #1 SMP i686 i686 i386         G95 (GCC 4.0.3 (g95 0.92!) Feb 4 2009)
    (jam)                         PGI C, Fortran, C++ 7.2-1 32-bit
                                  PGI C, Fortran, C++ 8.0-1 32-bit
                                  Intel(R) C Compiler for 32-bit
                                      applications, Versions 10.1, 11.0
                                  Intel(R) C++ Compiler for 32-bit
                                      applications, Version 10.1, 11.0
                                  Intel(R) Fortran Compiler for 32-bit
                                      applications, Version 10.1, 11.0
                                  Absoft 32-bit Fortran 95 10.0.7
                                  MPICH mpich2-1.0.8 compiled with
                                  gcc 4.1.2 and G95  (GCC 4.0.3 (g95 0.92!)

    Linux 2.6.9-42.0.10.ELsmp #1  gcc (GCC) 3.4.6
    SMP i686 i686 i386            G95 (GCC 4.0.3 (g95 0.92!) Feb 4 2009)
    (kagiso)                      MPICH mpich2-1.0.8 compiled with
                                  gcc 3.4.6 and G95  (GCC 4.0.3 (g95 0.92!)

    Linux 2.6.16.60-0.37-smp #1   gcc 4.1.2
    SMP x86_64 GNU/Linux          G95 (GCC 4.0.3 (g95 0.92!) Feb 4 2009)
    (smirom)                      Intel(R) C, C++, Fortran Compilers for 
                                  applications running on Intel(R) 64, 
                                  Versions 10.1, 11.0.
                                  PGI C, Fortran, C++ Version 7.2-1, 8.0-1
                                         for 64-bit target on x86-64
                                  gcc 4.1.2 and G95  (GCC 4.0.3 (g95 0.92!)
                                  MPICH mpich2-1.0.8 compiled with
                                  gcc 4.1.2 and G95 (GCC 4.0.3 (g95 0.92!)
                                  tested for both 32- and 64-bit binaries

    Linux 2.6.16.54-0.2.5 #1      Intel(R) C++ Version 10.1.017
    SGI Altix SMP ia64            Intel(R) Fortran Itanium(R) Version 10.1.017
    (cobalt)                      SGI MPI 1.38

    SunOS 5.10 32- and 64-bit     Sun WorkShop 6 update 2 C 5.9 Patch 124867-09
    (linew)                       Sun WorkShop 6 update 2 Fortran 95 8.3 
                                  Patch 127000-07
                                  Sun WorkShop 6 update 2 C++ 5.8 
                                  Patch 124863-11

    Intel Xeon Linux 2.6.18-      gcc 3.4.6 20060404
    92.1.10.el5_lustre.1.6.6smp-  Intel(R) C++ Version 10.0.026
    perfctr #2 SMP                Intel(R) Fortran Compiler Version 10.0.026
    (abe)                         Open MPI 1.2.2
                                  MVAPICH2-0.9.8p28p2patched-intel-ofed-1.2
                                  compiled with icc v10.0.026 and ifort 10.0.026

    IA-64 Linux 2.4.21-309.tg1    gcc (GCC) 3.2.2
    #1 SMP ia64                   Intel(R) C++ Version 8.1.037
    (NCSA tg-login)               Intel(R) Fortran Compiler Version 8.1.033
                                  mpich-gm-1.2.7p1..16-intel-8.1.037-r1

    Linux 2.6.9-55.0.9.EL_lustre  Intel(R) C, C++, Fortran Compilers for 
    .1.4.11.1smp #1 SMP           applications running on Intel(R) 64, 
    SMP x86_64 GNU/Linux          Versions 9.1.
    (SNL Spirit)             
                                  
    Linux 2.6.9-55.0.9.EL_lustre  Intel(R) C, C++, Fortran Compilers for 
    .1.4.11.1smp #1 SMP           applications running on Intel(R) 64, 
    SMP x86_64 GNU/Linux          Versions 10.1.
    (SNL Thunderbird)             
                                  
    Linux 2.6.18-63chaos #1 SMP   Intel(R) C, C++, Fortran Compilers for 
    SMP x86_64 GNU/Linux          applications running on Intel(R) 64, 
    (SNL Glory)                   Versions 10.1.
    
    Linux 2.6.18-63chaos #1 SMP   Intel(R) C, C++, Fortran Compilers for 
    SMP x86_64 GNU/Linux          applications running on Intel(R) 64, 
    (LLNL Zeus)                   Versions 9.1.
				  gcc/gfortran/g++ (GCC) 4.1.2.

    Windows XP                    Visual Studio .NET
                                  Visual Studio 2005 w/ Intel Fortran 9.1
                                  Cygwin(native gcc compiler and g95)

    Windows XP x64                Visual Studio 2005 w/ Intel Fortran 9.1

    Windows Vista                 Visual Studio 2005

    MAC OS  10.5.6 (Intel)        i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1
                                  GNU Fortran (GCC) 4.3.0 20070810
                                  G95 (GCC 4.0.3 (g95 0.91!) Apr 24 2008)
                                  Intel C, C++ and Fortran compilers 10.1


Supported Configuration Features Summary
========================================

    In the tables below
          y   = tested and supported
          n   = not supported or not tested in this release
          C   = Cluster
          W   = Workstation
          x   = not working in this release
          dna = does not apply
          ( ) = footnote appears below second table
          <blank> = testing incomplete on this feature or platform 

Platform                           C        F90    F90      C++   zlib  SZIP
                                   parallel        parallel
Solaris2.10 32-bit                   n        y      n        y     y     y
Solaris2.10 64-bit                   n        y      n        y     y     y
IRIX64_6.5 32-bit                    n        n      n        n     y     y
IRIX64_6.5 64-bit                    n        y      y        y     y     y
Windows XP                           n        y(4)   n(4)     y     y     y
Windows XP x64                       n        y(4)   n(4)     y     y     y
Windows Vista                        n        n      n        y     y     y
Mac OS X 10.5 Intel                  n        y      n        y     y     y
AIX 5.3 32- and 64-bit               n        y      n        y     y     n
FreeBSD 6.3-STABLE 32&64 bit         n        y      n        y     y     y
RedHat EL4 2.6.9-42 i686 GNU (1)  W  y        y      y        y     y     y
RedHat EL5 2.6.18-128 i686 GNU (1)W  y        y(2)   y        y     y     y
RedHat EL5 2.6.18-128 i686 Intel  W  n        y      n        y     y     n
RedHat EL5 2.6.18-128 i686 PGI    W  n        y      n        y     y     n
SuSe Linux 2.6.16 x86_64 GNU (1)  W  y        y(3)   y        y     y     y
SuSe Linux 2.6.16 x86_64 Intel    W  n        y      n        y     y     n
SuSe Linux 2.6.16 x86_64 PGI      W  n        y      n        y     y     y
SuSe Linux 2.6.16 SGI Altix ia64  C  y        y      y        y     y     y
RedHat EL4 2.6.18 Xeon Lustre     C  y        y      y        y     y     n
SuSe Linux 2.4.21 ia64 Intel      C  y        y      y        y     y     n
Cray XT3 2.0.41                      y        y      y        y     y     n


Platform                           Shared  Shared    Shared    Thread-  
                                   C libs  F90 libs  C++ libs  safe     
Solaris2.10 32-bit                   y       y         y         y        
Solaris2.10 64-bit                   y       y         y         y        
IRIX64_6.5 32-bit                    y       dna       y         y        
IRIX64_6.5 64-bit                    y       y         n         y        
Windows XP                           y       y(4)      y         y        
Windows XP x64                       y       y(4)      y         y        
Windows Vista                        y       n         n         y        
Mac OS X 10.5                        y       n         y         n        
AIX 5.3 32- and 64-bit               n       n         n         n        
FreeBSD 6.3-STABLE 32&64 bit         y       n         y         y        
RedHat EL4 2.6.9-42 i686 GNU (1)  W  y       y         y         y        
RedHat EL5 2.6.18-128 i686 GNU (1)W  y       y(2)      y         y        
RedHat EL5  2.6.18-128 i686 Intel W  y       y         y         n        
RedHat EL5 2.6.18-128 i686 PGI    W  y       y         y         n        
SuSe Linux 2.6.16 x86_64 GNU (1)  W  y       y         y         y        
SuSe Linux 2.6.16 x86_64 Intel    W  y       y         y         n        
SuSe Linux 2.6.16 x86_64 PGI      W  y       y         y         n        
SuSe Linux 2.6.16 SGI Altix ia64  C  y                           n        
RedHat EL4 2.6.18 Xeon Lustre     C  y       y         y         n
SuSe Linux 2.4.21 ia64 Intel      C  y       y         y         n        
Cray XT3 2.0.41                      n       n         n         n

           (1) Fortran compiled with g95.
           (2) With PGI and Absoft compilers.
           (3) With PGI compiler for Fortran.
           (4) Using Visual Studio 2005 or Cygwin
    Compiler versions for each platform are listed in the preceding
    "Platforms Tested" table.


Known Problems
==============
* Parallel tests failed with 16 processes with data inconsistency at testphdf5
  / dataset_readAll. Parallel tests also failed with 32 and 64 processes with
  collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks
  with MPI IO. CMC - 2009/04/28

* There is a known issue in which HDF5 will change the timestamp on a file 
  simply by opening it with read/write permissions, even if the file is not
  modified in any way. This is due to the way in which HDF5 manages the file 
  superblock. A fix is currently underway and should be included in the 1.8.4
  release of HDF5. MAM - 2009/04/28

* For gcc v4.3 and v4.4, with production mode, if -O3 is used, H5Tinit.c
  would fail to compile. Actually bad H5Tinit.c is produced.  If -O (same
  as -O1) is used, H5Tinit.c compiled okay but test/dt_arith would fail.
  When -O0 (no optimizatio) is used, H5Tinit.c compilete okay and all
  tests passed. Therefore, -O0 is imposed for v4.3 and v4.4 of gcc.
  AKC - 2009/04/20

* For Red Storm, a Cray XT3 system, the tools/h5ls/testh5ls.sh and
  tools/h5copy/testh5copy.sh will fail some of its sub-tests. These sub-tests
  are expected to fail and should exit with a non-zero code but the yod
  command does not propagate the exit code of the executables. Yod always
  returns 0 if it can launch the executable.  The test suite shell expects
  a non-zero for this particular test, therefore it concludes the test has
  failed when it receives 0 from yod.  Skip all the "failing" test for now
  by changing them as following.

  ======== Original tools/h5ls/testh5ls.sh =========
  TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5
  ======== Change to ===============================
  echo SKIP TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5
  ==================================================

  ======== Original tools/h5copy/testh5copy.sh =========
  TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets  -d grp_rename
  TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets  -d /grp_rename/grp_dsets
  TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets
  TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested
  H5LSTEST $FILEOUT
  ======== Change to ===============================
  echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets  -d grp_rename
  echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets  -d /grp_rename/grp_dsets
  echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets
  echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested
  echo SKIP H5LSTEST $FILEOUT
  ==================================================
  AKC - 2008/11/10

* For Red Storm, a Cray XT3 system, the yod command sometimes gives the
  message,  "yod allocation delayed for node recovery".  This interferes with
  test suites that do not expect seeing this message.  See the section of "Red
  Storm" in file INSTALL_parallel for a way to deal with this problem.
  AKC - 2008/05/28

* We have discovered two problems when running collective IO parallel HDF5 
  tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a 
  Linux cluster at NCSA.

  Under some complex selection cases: 
  1) MPI_Get_element returns the wrong value.
  2) MPI_Type_struct also generates the wrong derived datatype and corrupt 
     data may be generated.
  These issues arise only when turning on collective IO with chunking storage 
  with some complex selections. We have not found these problems on other 
  MPI-IO compilers. If you encounter these problems, you may use independent 
  IO instead.

  To avoid this behavior, change the following line in your code
      H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_COLLECTIVE);
  to
      H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_INDEPENDENT);
  KY - 2007/08/24

* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
  use -mp -O1 compilation flags to build the libraries. A higher level of 
  optimization causes failures in several HDF5 library tests. 

* For LLNL, uP: both serial and parallel tests pass.  
  Zeus: Serial tests pass but parallel tests fail with a known problem in MPI.
  ubgl: Serial tests pass but parallel tests fail. 

* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and 
  the application asks to do collective IO, we have found that when using 4 
  processors, a simple collective write will sometimes be hung. This can be 
  verified with t_mpi test under testpar.

* On IRIX6.5, when the C compiler version is greater than 7.4, complicated
  MPI derived datatype code will work. However, the user should increase
  the value of the MPI_TYPE_MAX environment variable to some appropriate value 
  to use collective irregular selection code.  For example, the current 
  parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test. 

* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
  with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
  There was a bug in the calculation of the Fletcher32 checksum in the 
  library before v1.6.3; the checksum value was not consistent between big-
  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
  However, after fixing the bug, the checksum value was no longer the same as 
  before on little-endian system.  Library releases after 1.6.4 can still read 
  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
  SLU - 2005/6/30

* On IBM AIX systems, parallel HDF5 mode will fail some tests with error
  messages like "INFO: 0031-XXX ...".  This is from the command `poe'.
  Set the environment variable MP_INFOLEVEL to 0 to minimize the messages
  and run the tests again.

  The tests may fail with messages like "The socket name is already in use",  
  but HDF5 does not use sockets.  This failure is due to problems with the 
  poe command trying to set up the debug socket.  To resolve this problem, 
  check to see whether there are many old /tmp/s.pedb.* files staying around.  
  These are sockets used by the poe command and left behind due to failed 
  commands.  First, ask your system administrator to clean them out.  
  Lastly, request IBM to provide a means to run poe without the debug socket.

* The --enable-static-exec configure flag fails to compile for Solaris
  platforms. This is due to the fact that not all of the system libraries on 
  Solaris are available in a static format.

  The --enable-static-exec configure flag also fails to correctly compile
  on IBM SP2 platforms for serial mode. The parallel mode works fine with 
  this option.
  
  It is suggested that you do not use this option on these platforms
  during configuration.

* There is also a configure error on Altix machines that incorrectly reports 
  when a version of Szip without an encoder is being used.

* Information about building with PGI and Intel compilers is available in
  the INSTALL file sections 4.7 and 4.8.


%%%%1.8.2%%%%   
 

HDF5 version 1.8.2 released on Mon Nov 10 15:43:09 CST 2008
================================================================================

INTRODUCTION
============

This document describes the differences between HDF5-1.8.1 and HDF5 1.8.2, 
and contains information on the platforms tested and known problems in 
HDF5-1.8.2. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt 
and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source.

Links to the HDF5 1.8.2 source code, documentation, and additional materials
can be found on the HDF5 web page at:

     http://www.hdfgroup.org/products/hdf5/

The HDF5 1.8.2 release can be obtained from:

     http://www.hdfgroup.org/HDF5/release/obtain5.html

User documentation for 1.8.2 can be accessed directly at this location: 

     http://www.hdfgroup.org/HDF5/doc/

New features in the HDF5-1.8.x release series, including brief general 
descriptions of some new and modified APIs, are described in the "What's New 
in 1.8.0?" document:

     http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html

All new and modified APIs are listed in detail in the "HDF5 Software Changes 
from Release to Release" document, in the section "Release 1.8.2 (current 
release) versus Release 1.8.1":

     http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

If you have any questions or comments, please send them to the HDF Help Desk:

     help@hdfgroup.org


CONTENTS
========

- New Features
- Support for new platforms and languages
- Bug Fixes since HDF5-1.8.1
- Platforms Tested
- Supported Configuration Features Summary
- Known Problems


New Features
============

        Configuration
        -------------
        - Upgraded libtool to version 2.2.6a. (MAM - 2008/10/15).

        Library
        -------
	- Added two new public routines: H5Pget_elink_fapl() and
      	  H5Pset_elink_fapl(). (see bug #1247) (VC - 2008/10/13)
        - Improved free space tracking in file to be faster. (QAK - 2008/10/06)
        - Added 'mounted' field to H5G_info_t struct. (QAK - 2008/07/15)

        Parallel Library
        ----------------
        - None

        Tools
        -----
        - h5repack: added new options -u and -b to add a userblock to an HDF5 
          file during the repack.  (PVN - 2008/08/26)
        - h5repack: added options -t and -a to call H5Pset_alignment while 
          creating a repacked file. (PVN - 2008/08/29)
        - h5ls: added capability to traverse through external links when the -r
          (recursive) flag is given. (NAF - 2008/09/16)
        - h5ls: added -E option to enable traversal of external links.  
          h5ls will not traverse external links without this flag being set.
            (NAF - 2008/10/06)
        - h5dump: when -b flag is used without a keyword after it, binary 
          output defaults to NATIVE. MEMORY keyword was deprecated 
          and replaced by NATIVE keyword. (PVN - 2008/10/30)
        - h5diff: returns 1 when file graphs differ by any object.  
          Error return code was changed to 2 from -1.  (PVN - 2008/10/30)
        - h5import: TEXTFPE (scientific format) was deprecated. Use TEXTFP 
          instead (PVN - 2008/10/30)



        F90 API
        ------
         - Added optional parameter 'mounted' to H5Gget_info_f, 
           H5Gget_info_by_idx_f, H5Gget_info_by_name_f (MSB - 2008/09/24)
	 - Added H5Tget_native_type_f (MSB - 2008/09/30)
	 
	 
        C++ API
        ------
        - These member functions were added as wrapper for H5Rdereference to
          replace the incorrect IdComponent::dereference().
             void H5Object::dereference(H5Object& obj, void* ref, 
                                        H5R_type_t ref_type=H5R_OBJECT)
             void H5Object::dereference(H5File& h5file, void* ref, 
                                        H5R_type_t ref_type=H5R_OBJECT)
             void H5Object::dereference(Attribute& obj, void* ref, 
                                        H5R_type_t ref_type=H5R_OBJECT)

          In addition, these constructors were added to create the associated
          objects by way of dereference:
             DataSet(H5Object& obj, void* ref, H5R_type_t ref_type=H5R_OBJECT)
             DataSet(H5File& file, void* ref, H5R_type_t ref_type=H5R_OBJECT)
             DataSet(Attribute& attr, void* ref, H5R_type_t ref_type=H5R_OBJECT)
             Group(H5Object& obj, void* ref, H5R_type_t ref_type=H5R_OBJECT)
             Group(H5File& obj, void* ref, H5R_type_t ref_type=H5R_OBJECT)
             Group(Attribute& attr, void* ref, H5R_type_t ref_type=H5R_OBJECT)
             DataType(H5Object& obj, void* ref, H5R_type_t ref_type=H5R_OBJECT)
             DataType(H5File& file, void* ref, H5R_type_t ref_type=H5R_OBJECT)
             DataType(Attribute& attr, void* ref, H5R_type_t ref_type=H5R_OBJECT)
          (BMR - 2008/10/29)


Support for New Platforms, Languages, and Compilers
===================================================
        - Intel 10.1 is supported on Mac OS X 10.5.4.
          Note:
          When Fortran is enabled, configure automatically
          disables the build of shared libraries (i.e., only
          static C and C++ HDF5 libraries will be built
          along with the static HDF5 Fortran library).
          Intel 10.1 C and C++ compilers require 
          "-no-multibyte-chars" compilation flag due to the known
          bug in the compilers.
            (EIP - 2008/10/30)


Bug Fixes since HDF5-1.8.1 
==========================

        Configuration
        -------------
        - Fixed error with 'make check install' failing due to h5dump
          needing other tools built first. (MAM - 2008/10/15).
        - When using shared szip, it is no longer necessary to specify
          the path to the shared szip libraries in LD_LIBRARY_PATH.
           (MAM - 2008/10/15).
	- The file libhdf5_fortran.settings is not installed since its content
	  is included in libhdf5.settings now. (AKC - 2008/10/21)
        - "make DESTDIR=xxx install" failed to install some tools and files
          (e.g., h5cc and fortran modules). Fixed. (AKC - 2008/10/8).

        Library
        -------
        - H5Ovisit and H5Ovisit_by_name will now properly terminate when the
            callback function returns a positive value on the starting object.
            (NAF - 2008/11/03)
        - Fixed an error where a null message could be created that was larger
            than could be written to the file.  (NAF - 2008/10/23)
        - Corrected error with family/split/multi VFD not updating driver info
            when "latest" version of the file format used. (QAK - 2008/10/14)
        - Corrected alignment+threshold errors to work correctly when metadata
            aggregation is enabled. (QAK - 2008/10/06)
        - Changed H5Fget_obj_count and H5Fget_obj_ids to ignore objects
            registered by the library for internal library use.
            (NAF - 2008/10/06)
        - Fixed potential memory leak during compound conversion.
            (NAF - 2008/10/06)
        - Changed the return value of H5Fget_obj_count from INT to SSIZE_T. 
            Also changed the return value of H5Fget_obj_ids from HERR_T to 
            SSIZE_T and the type of the parameter MAX_OBJS from INT to SIZE_T. 
            (SLU - 2008/09/26)
        - Fixed an issue that could cause data to be improperly overwritten
            during compound type conversion.  (NAF - 2008/09/19)
        - Fixed pointer alignment violations that could occur during vlen
            conversion.  (NAF - 2008/09/16)
        - Fixed problem where library could cause a segmentation fault when
            an invalid location ID was given to H5Giterate(). (QAK - 2008/08/19)
        - Fixed improper shutdown when objects have reference count > 1.  The
            library now tracks reference count due to the application separately
            from that due to internal library routines.  (NAF - 2008/08/19)
        - Fixed assertion failure caused by incorrect array datatype version.
            (NAF - 2008/08/08)
        - Fixed an issue where mount point traversal would fail when using
            multiple handles for the child.  (NAF - 2008/08/07)
        - Fixed an issue where mount points were inaccessible when using 
            multiple file handles for the parent. The mount table is now in 
            the shared file structure (the parent pointer is still in the 
            top structure).  (NAF - 2008/08/07)
        - Fixed assertion failure caused by incorrect array datatype version.
            (NAF - 2008/08/04)
        - Fixed issue where a group could have a file mounted on it twice.
            (QAK - 2008/07/15)
        - When an attribute was opened twice and data was written with 
            one of the handles, the file didn't have the data. It happened 
            because each handle had its own object structure, and the empty 
            one overwrote the data with fill value.  This is fixed by making 
            some attribute information like the data be shared in the 
            attribute structure.  (SLU - 2008/07/07)
        - Fixed a Windows-specific issue in the ohdr test which was causing 
            users in some timezones to get false errors. This a deficiency in 
            the Windows mktime() function, and has been handled properly.  
            (SJW  - 2008/06/19)

        Parallel Library
        ----------------
        - None

        Tools
        -----
        - h5dump now checks for uniqueness of committed datatypes.
            (NAF - 2008/10/15)
        - Fixed unnecessary indentation of committed datatypes in h5dump.
            (NAF - 2008/10/15)
	- Fixed bugs in h5stat: segmemtation fault when printing groups and
          print warning message when traversal of objects is unsuccessful.
          (see bug #1253) (VC- 2008/10/13)
        - Fixed bug in h5ls that prevented relative group listings (like
            "h5ls foo.h5/bar") from working correctly (QAK - 2008/06/03)
        - h5dump: when doing binary output (-b), the stdout printing of 
             attributes was done incorrectly. Removed printing of attributes 
             when doing binary output. (PVN - 2008/06/05)


        F90 API
        ------
        - h5sselect_elements_f: Added additional operators H5S_SELECT_APPEND 
            and H5S_SELECT_PREPEND (MSB - 2008/09/30)
	- h5sget_select_elem_pointlist: Fixed list of returned points by 
            rearranging the point list correctly by accounting for C 
            conventions. (MSB - 2008/09/30)
        - h5sget_select_hyper_blocklist_f: Fixed error in transposed dimension 
            of arrays.(MSB - 2008/9/30)
        - h5sget_select_bounds_f: Swapped array bounds to account for C and 
            Fortran reversed array notation (MSB - 2008/9/30)
	- Changed to initializing string to a blank character instead of a 
            null type in tH5P.f90 to fix compiling error using AIX 5.3.0 
            (MSB - 2008/7/29)
        - Fixed missing commas in H5test_kind.f90 detected by NAG compiler 
            (MSB - 2008/7/29)
        - Fixed passing and array to a scalar in tH5A_1_8.f90 detected by 
            NAG compiler (MSB - 2008/7/29)
	- Added the ability of the test programs to use the status of 
            HDF5_NOCLEANUP to determine if the *.h5 files should be removed 
            or not after the tests are completed (MSB - 2008/10/1)
	- In nh5tget_offset_c: (MSB 9/12/2008)
           If offset was equal to 0 it returned the error code of -1, 
           this was changed to return an error code of -1 when the offset 
           value is < 0.
        - Uses intrinsic Fortran function SIZEOF if available when detecting 
           type of INTEGERs and REALs in H5test_kind.f90 (MSB - 2008/9/3)
        - Put the DOUBLE PRECISION interfaces in a separate module and 
           added a USE statement for the module. The interfaces are 
           included/excluded depending on the state of FORTRAN_DEFAULT_REAL
           is DBLE_F which detects if the default REAL is DOUBLE PRECISION.
           This allows the library to be compiled with -r8 Fortran flag 
           without the user needing to edit the source code. 
           (MSB - 200/8/27)
        - Enable building shared library for fortran by adding the flag -fPIC 
          to the compile flags for versions of Intel Fortran compiler >=9
           (MSB  - 2008/8/26)

        C++ API
        ------
        - Fixed a design bug which allowed an Attribute object to create/modify
          attributes (bugzilla #1068).  The API class hierarchy was revised
          to address the problem.  Classes AbstractDS and Attribute are moved
          out of H5Object.  Class Attribute now multiply inherits from
          IdComponent and AbstractDs and class DataSet from H5Object and
          AbstractDs.  In addition, the data member IdComponent::id was
          moved into subclasses: Attribute, DataSet, DataSpace, DataType,
          H5File, Group, and PropList. (BMR - 2008/05/20)
        - IdComponent::dereference was incorrect and replaced as described
          in "New Features" section.
          (BMR - 2008/10/29)


Platforms Tested
================
The following platforms and compilers have been tested for this release.

    AIX 5.3			  xlc 7.0.0.8
				  xlf 09.01.0000.0008
				  xlC 7.0.0.8
				  mpcc_r 7.0.0.8
				  mpxlf_r 09.01.0000.0008

    Cray XT3 (2.0.41)             cc (pgcc) 7.1-4
    (red storm)                   ftn (pgf90) 7.1-4
				  CC (pgCC) 7.1-4

    FreeBSD 6.3-STABLE i386       gcc 3.4.6 [FreeBSD] 20060305
    (duty)                        g++ 3.4.6 [FreeBSD] 20060305
                                  gcc 4.2.5 20080702
                                  g++ 4.2.5 20080702
                                  gfortran 4.2.5 20080702

    FreeBSD 6.3-STABLE amd64      gcc 3.4.6 [FreeBSD] 20060305
    (liberty)                     g++ 3.4.6 [FreeBSD] 20060305
                                  gcc 4.2.5 20080702
                                  g++ 4.2.5 20080702
                                  gfortran 4.2.5 20080702

    IRIX64 6.5 (64 & n32)         MIPSpro cc 7.4.4m
                                  F90 MIPSpro 7.4.4m 
                                  C++ MIPSpro cc 7.4.4m

    Linux 2.6.9-42.0.10.ELsmp #1  gcc (GCC) 3.4.6
    SMP i686 i386                 G95 (GCC 4.0.3 (g95 0.92!) April 18 2007)
    (kagiso)                      PGI C, Fortran, C++ 7.2-1 32-bit
                                  Intel(R) C Compiler for 32-bit
                                      applications, Version 10.1
                                  Intel(R) C++ Compiler for 32-bit
                                      applications, Version 10.1
                                  Intel(R) Fortran Compiler for 32-bit
                                      applications, Version 10.1
                                  Absoft 32-bit Fortran 95 10.0.4
                                  MPICH mpich-1.2.7 compiled with
                                  gcc 3.4.6 and G95  (GCC 4.0.3 (g95 0.92!)
                                  MPICH mpich2-1.0.6p1 compiled with
                                  gcc 3.4.6 and G95 (GCC 4.0.3 (g95 0.92!)

    Linux 2.6.16.46-0.14-smp #1   Intel(R) C++ for Intel(R) EM64T 
    SMP x86_64 GNU/Linux          Ver.  10.1.013
    (smirom)                      Intel(R) Fortran Intel(R) EM64T 
                                  Ver.  10.1.013
                                  PGI C, Fortran, C++ Version 7.2-1
                                         for 64-bit target on x86-64
                                  MPICH mpich-1.2.7 compiled with
                                  gcc 4.1.2 and G95  (GCC 4.0.3 (g95 0.92!)
                                  MPICH mpich2-1.0.7 compiled with
                                  gcc 4.1.2 and G95 (GCC 4.0.3 (g95 0.92!)
                                  tested for both 32- and 64-bit binaries

    Linux 2.6.16.54-0.2.5 #1      Intel(R) C++ Version 10.1.017
    Altix SMP ia64                Intel(R) Fortran Itanium(R) Version 10.1.017
    (cobalt)                      SGI MPI 1.16

    SunOS 5.10 32- and 64-bit     Sun WorkShop 6 update 2 C 5.8
    (linew)                       Sun WorkShop 6 update 2 Fortran 95 8.2
                                  Sun WorkShop 6 update 2 C++ 5.8
                                  Patch 121019-06

    Xeon Linux 2.6.9-42.0.10.EL_lustre-1.4.10.1smp
    (abe)                         Intel(R) C++ Version 10.0.026
                                  Intel(R) Fortran Compiler Version 10.0.026
                                  Open MPI 1.2.2
                                  MVAPICH2-0.9.8p28p2patched-intel-ofed-1.2
                                  compiled with icc v10.0.026 and 
                                  ifort 10.0.026

    IA-64 Linux 2.4.21-309.tg1 #1 SMP
        ia64                      gcc (GCC) 3.2.2
    (NCSA tg-login)               Intel(R) C++ Version 8.1.037
                                  Intel(R) Fortran Compiler Version 8.1.033
                                  mpich-gm-1.2.7p1..16-intel-8.1.037-r1

    Intel 64 Linux 2.6.9-42.0.10.EL_lustre-1.4.10.1smp
    (abe)                         gcc 3.4.6 20060404
                                  Intel(R) C++ Version 10.0
                                  Intel (R) Fortran Compiler Version 10.0
                                  mvapich2-0.9.8p2patched-intel-ofed-1.2

    Windows XP                    Visual Studio .NET
                                  Visual Studio 2005 w/ Intel Fortran 9.1
                                  Cygwin(native gcc compiler and g95)

    Windows XP x64                Visual Studio 2005 w/ Intel Fortran 9.1

    Windows Vista                 Visual Studio 2005

    MAC OS  10.5.4 (Intel)        i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1
                                  GNU Fortran (GCC) 4.3.0 20070810
                                  G95 (GCC 4.0.3 (g95 0.91!) Apr 24 2008)
                                  Intel C, C++ and Fortran compilers 10.1
                                  

Supported Configuration Features Summary
========================================

    In the tables below
          y   = tested and supported
          n   = not supported or not tested in this release
          x   = not working in this release
          dna = does not apply
          ( ) = footnote appears below second table
          <blank> = testing incomplete on this feature or platform 

Platform                 C        F90    F90      C++   zlib  SZIP
                         parallel        parallel
Solaris2.10 32-bit       n        y      n        y     y     y
Solaris2.10 64-bit       n        y      n        y     y     y
IRIX64_6.5 32-bit        n        n      n        n     y     y
IRIX64_6.5 64-bit        n        y      y        y     y     y
Windows XP               n        y(15)  n(15)    y     y     y
Windows XP x64           n        y(15)  n(15)    y     y     y
Windows Vista            n        n      n        y     y     y
Mac OS X 10.5 Intel      n        y      n        y     y     y
AIX 5.3 32- and 64-bit   n        y      n        y     y     n
FreeBSD 6.3-STABLE 
32&64 bit                n        y      n        y     y     y
RedHat EL4       (3)  W  y(1)     y(10)  y(1)     y     y     y
RedHat EL4 Intel (3)  W  n        y      n        y     y     n
RedHat EL4 PGI   (3)  W  n        y      n        y     y     n
SuSe x86_64 gcc(3,12) W  y(2)     y(11)  y(2)     y     y     y
SuSe x86_64 Int(3,12) W  n        y(13)  n        y     y     n
SuSe x86_64 PGI(3,12) W  n        y(8)   n        y     y     y
Linux 2.6 SuSE ia64   C 
    Intel       (3,7)    y        y      y        y     y     n
Linux 2.6 SGI Altix 
    ia64 Intel    (3)    y        y      y        y     y     y
Linux 2.6 RHEL        C
    Lustre Intel  (5)    y(4)     y      y(4)     y     y     n
Cray XT3 2.0.41          y        y      y        y     y     n


Platform                 Shared  Shared    Shared    Thread-  
                         C libs  F90 libs  C++ libs  safe     
Solaris2.10 32-bit       y       y         y         y        
Solaris2.10 64-bit       y       y         y         y        
IRIX64_6.5 32-bit        y       dna       y         y        
IRIX64_6.5 64-bit        y       y         n         y        
Windows XP               y       y(15)     y         y        
Windows XP x64           y       y(15)     y         y        
Windows Vista            y       n         n         y        
Mac OS X 10.5            y       n         y         n        
AIX 5.3 32- and 64-bit   n       n         n         n        
FreeBSD 6.2 32&64 bit    y       n         y         y        
RedHat EL4       (3)  W  y       y(10)     y         y        
RedHat EL4 Intel (3)  W  y       y         y         n        
RedHat EL4 PGI   (3)  W  y       y         y         n        
SuSe x86_64 GNU(3,12) W  y       y         y         y        
SuSe x86_64 Int(3,12) W  y       y         y         n        
SuSe x86_64 PGI(3,12) W  y       y         y         n        
Linux 2.4 SuSE        C
    ia64 C Intel (7)     y       y         y         n        
Linux 2.4 SGI Altix   C
    ia64 Intel           y                           n        
Linux 2.6 RHEL        C
    Lustre Intel (5)     y       y         y         n
Cray XT3 2.0.41          n       n         n         n

    Notes: (1)  Using mpich2 1.0.6.
           (2)  Using mpich2 1.0.7.
           (3)  Linux 2.6 with GNU, Intel, and PGI compilers, as indicated.  
                  W or C indicates workstation or cluster, respectively.
           (4)  Using mvapich2 0.9.8.
           (5)  Linux 2.6.9-42.0.10.  Xeon cluster with ELsmp_perfctr_lustre 
                  and Intel compilers
           (6)  Linux 2.4.21-32.0.1.  Xeon cluster with ELsmp_perfctr_lustre 
                  and Intel compilers
           (7)  Linux 2.4.21, SuSE_292.till.  Ia64 cluster with Intel compilers
           (8)  pgf90
           (9)  With Compaq Visual Fortran 6.6c compiler.
           (10) With PGI and Absoft compilers.
           (11) PGI and Intel compilers for both C and Fortran
           (12) AMD Opteron x86_64
           (13) ifort
           (14) Yes with C and Fortran, but not with C++
           (15) Using Visual Studio 2005 or Cygwin
           (16) Not tested for this release.
    Compiler versions for each platform are listed in the preceding
    "Platforms Tested" table.


Known Problems
==============
* For Red Storm, a Cray XT3 system, the tools/h5ls/testh5ls.sh and
  tools/h5copy/testh5copy.sh will fail some of its sub-tests. These sub-tests
  are expected to fail and should exit with a non-zero code but the yod
  command does not propagate the exit code of the executables. Yod always
  returns 0 if it can launch the executable.  The test suite shell expects
  a non-zero for this particular test, therefore it concludes the test has
  failed when it receives 0 from yod.  Skip all the "failing" test for now
  by changing them as following.

  ======== Original tools/h5ls/testh5ls.sh =========
  TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5
  ======== Change to ===============================
  echo SKIP TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5
  ==================================================

  ======== Original tools/h5copy/testh5copy.sh =========
  TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets  -d grp_rename
  TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets  -d /grp_rename/grp_dsets
  TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets
  TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested
  H5LSTEST $FILEOUT
  ======== Change to ===============================
  echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets  -d grp_rename
  echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets  -d /grp_rename/grp_dsets
  echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets
  echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested
  echo SKIP H5LSTEST $FILEOUT
  ==================================================
  AKC - 2008/11/10

* For Red Storm, a Cray XT3 system, the yod command sometimes gives the
  message,  "yod allocation delayed for node recovery".  This interferes with
  test suites that do not expect seeing this message.  See the section of "Red
  Storm" in file INSTALL_parallel for a way to deal with this problem.
  AKC - 2008/05/28

* We have discovered two problems when running collective IO parallel HDF5 
  tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a 
  Linux cluster at NCSA.

  Under some complex selection cases: 
  1) MPI_Get_element returns the wrong value.
  2) MPI_Type_struct also generates the wrong derived datatype and corrupt 
     data may be generated.
  These issues arise only when turning on collective IO with chunking storage 
  with some complex selections. We have not found these problems on other 
  MPI-IO compilers. If you encounter these problems, you may use independent 
  IO instead.

  To avoid this behavior, change the following line in your code
      H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_COLLECTIVE);
  to
      H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_INDEPENDENT);

  KY - 2007/08/24

* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
  use -mp -O1 compilation flags to build the libraries. A higher level of 
  optimization causes failures in several HDF5 library tests. 

* For LLNL, uP: both serial and parallel tests pass.  
  Zeus: Serial tests pass but parallel tests fail with a known problem in MPI.
  ubgl: Serial tests pass but parallel tests fail. 

* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and 
  the application asks to do collective IO, we have found that when using 4 
  processors, a simple collective write will sometimes be hung. This can be 
  verified with t_mpi test under testpar.

* On IRIX6.5, when the C compiler version is greater than 7.4, complicated
  MPI derived datatype code will work. However, the user should increase
  the value of the MPI_TYPE_MAX environment variable to some appropriate value 
  to use collective irregular selection code.  For example, the current 
  parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test. 

* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
  with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
  There was a bug in the calculation of the Fletcher32 checksum in the 
  library before v1.6.3; the checksum value was not consistent between big-
  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
  However, after fixing the bug, the checksum value was no longer the same as 
  before on little-endian system.  Library releases after 1.6.4 can still read 
  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
  SLU - 2005/6/30

* On IBM AIX systems, parallel HDF5 mode will fail some tests with error
  messages like "INFO: 0031-XXX ...".  This is from the command `poe'.
  Set the environment variable MP_INFOLEVEL to 0 to minimize the messages
  and run the tests again.

  The tests may fail with messages like "The socket name is already in use",  
  but HDF5 does not use sockets.  This failure is due to problems with the 
  poe command trying to set up the debug socket.  To resolve this problem, 
  check to see whether there are many old /tmp/s.pedb.* files staying around.  
  These are sockets used by the poe command and left behind due to failed 
  commands.  First, ask your system administrator to clean them out.  
  Lastly, request IBM to provide a means to run poe without the debug socket.

* The --enable-static-exec configure flag fails to compile for Solaris
  platforms. This is due to the fact that not all of the system libraries on 
  Solaris are available in a static format.

  The --enable-static-exec configure flag also fails to correctly compile
  on IBM SP2 platforms for serial mode. The parallel mode works fine with 
  this option.
  
  It is suggested that you do not use this option on these platforms
  during configuration.

* There is also a configure error on Altix machines that incorrectly reports 
  when a version of Szip without an encoder is being used.

* Information about building with PGI and Intel compilers is available in
  the INSTALL file sections 4.7 and 4.8.




%%%%1.8.1%%%%   


HDF5 version 1.8.1 released on Thu May 29 15:28:55 CDT 2008
================================================================================

INTRODUCTION
============

This document describes the differences between the HDF5-1.8.1 release 
and HDF5 1.8.0, and contains information on the platforms tested and known 
problems in HDF5-1.8.1.  For more details, see the files
HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory 
of the HDF5 source.

Links to the HDF5 1.8.1 source code, documentation, and additional materials
can be found on the HDF5 web page at:

     http://www.hdfgroup.org/products/hdf5/

The HDF5 1.8.1 release can be obtained from:

     http://www.hdfgroup.org/HDF5/release/obtain5.html

User documentation for 1.8.1 can be accessed directly at this location: 

     http://www.hdfgroup.org/HDF5/doc/

New features in the HDF5-1.8.x release series, including brief general 
descriptions of some new and modified APIs, are described in the "What's New 
in 1.8.0?" document:

     http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html

All new and modified APIs are listed in detail in the "HDF5 Software Changes 
from Release to Release" document, in the section "Release 1.8.1 (current 
release) versus Release 1.8.0":

     http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

If you have any questions or comments, please send them to the HDF Help Desk:

     help@hdfgroup.org


CONTENTS
========

- New Features
- Support for new platforms and languages
- Bug Fixes since HDF5-1.8.0
- Platforms Tested
- Supported Configuration Features Summary
- Known Problems


New Features
============

        Configuration
        -------------
        - The lib/libhdf5.settings file contains much more configure
          information. (AKC - 2008/05/18)

        - The new configure option "--disable-sharedlib-rpath" disables 
          embedding the '-Wl,-rpath' information into executables when 
          shared libraries are produced, and instead solely relies on the 
          information in LD_LIBRARY_PATH. (MAM - 2008/05/15)

        - Configuration suite now uses Autoconf 2.61, Automake 1.10.1, and 
          Libtool 2.2.2 (MAM - 2008/05/01)

        Source code distribution
        ========================

        Library
        -------
        - None

        Parallel Library
        ----------------
        - None

        Tools
        -----
        - h5repack: Reinstated the -i and -o command line flags to specify 
          input and output files.  h5repack now understands both the old
          syntax (with -i and -o) and the new syntax introduced in Release
          1.8.0.  (PVN - 2008/05/23)
        - h5dump: Added support for external links, displaying the object that 
          an external link points to. (PVN - 2008/05/12)
        - h5dump: Added an option, -m, to allow user-defined formatting in the 
          output of floating point numbers. (PVN - 2008/05/06)
        - h5dump, in output of the -p option: Added effective data compression 
          ratio to the dataset storage layout output when a compression filter 
          has been applied to a dataset.  (PVN - 2008/05/01)

        F90 API
        ------
        New H5A, H5G, H5L, H5O, and H5P APIs to enable 1.8 features were
        added. See "Release 1.8.1 (current release) versus Release 1.8.0" in 
        the document "HDF5 Software Changes from Release to Release"
        (http://hdfgroup.org/HDF5/doc/ADGuide/Changes.html) for the 
        complete list of the new APIs.

        C++ API
        ------
        - None


Support for New Platforms, Languages, and Compilers
===================================================
        - Both serial and parallel HDF5 are supported for the Red Storm machine 
          which is a Cray XT3 system.

        - The Fortran library will work correctly if compiled with the -i8 
          flag.  This has been tested with the g95, PGI and Intel Fortran 
          compilers.


Bug Fixes since HDF5-1.8.0 
==========================

        Configuration
        -------------
        - None

        Source code distribution
        ========================

        Library
        -------
        - Chunking:  Chunks greater than 4GB are disallowed. 
          (QAK - 2008/05/16)
        - Fixed the problem with searching for a target file when following 
          an external link.  The search pattern will depend on whether the 
          target file's pathname is an absolute or a relative path. 
          Please see the H5Lcreate_external description in the "HDF5 
          Reference Manual" (http://hdfgroup.org/HDF5/doc/RM/RM_H5L.html).
          (VC - 2008/04/08)
        - Fixed possible file corruption bug when encoding datatype
          descriptions for compound datatypes whose size was between
          256 and 511 bytes and the file was opened with the "use the
          latest format" property enabled (with H5Pset_libver_bounds).
          (QAK - 2008/03/13)
        - Fixed bug in H5Aget_num_attrs() routine to correctly handle an 
          invalid location identifier.  (QAK - 2008/03/11)

        Parallel Library
        ----------------
        - None

        Tools
        -----
        - Fixed bug in h5diff that prevented datasets and attributes with
          variable-length string elements from comparing correctly.
          (QAK - 2008/02/28)
        - Fixed bug in h5dump that caused binary output to be made only for 
          the first dataset, when several datasets were requested.
          (PVN - 2008/04/07)

        F90 API
        ------
        - The h5tset(get)_fields subroutines were missing the parameter to 
          specify a sign position; fixed.  (EIP - 2008/05/23)
        - Many APIs were fixed to work with the 8-byte integers in Fortran vs.
          4-byte integers in C. This change is trasparent to user applications.

        C++ API
        ------
        - The class hierarchy was revised to address the problem reported
          in bugzilla #1068, Attribute should not be derived from base
          class H5Object.  Classes AbstractDS was moved out of H5Object.
          Class Attribute now multiply inherits from IdComponent and
          AbstractDs and class DataSet from H5Object and AbstractDs.
          In addition, data member IdComponent::id was moved into subclasses:
          Attribute, DataSet, DataSpace, DataType, H5File, Group, and PropList.
          (BMR - 2008/05/20)
	- IdComponent::dereference was incorrect; it was changed from:
		void IdComponent::dereference(IdComponent& obj, void* ref)
	  to:
		void H5Object::dereference(H5File& h5file, void* ref)
		void H5Object::dereference(H5Object& obj, void* ref)
	  (BMR - 2008/05/20)
        - Revised Attribute::write and Attribute::read wrappers to handle
          memory allocation/deallocation properly. (bugzilla 1045)
          (BMR - 2008/05/20)


Platforms Tested
================
The following platforms and compilers have been tested for this release.

    Cray XT3 (2.0.41)             cc (pgcc) 7.1-4
    (red storm)                   ftn (pgf90) 7.1-4
				  CC (pgCC) 7.1-4
                                  mpicc 1.0.2
                                  mpif90 1.0.2

    FreeBSD 6.2-STABLE i386       gcc 3.4.6 [FreeBSD] 20060305
    (duty)                        g++ 3.4.6 [FreeBSD] 20060305
                                  gcc 4.2.1 20080123
                                  g++ 4.2.1 20080123
                                  gfortran 4.2.1 20070620

    FreeBSD 6.2-STABLE amd64      gcc 3.4.6 [FreeBSD] 20060305
    (liberty)                     g++ 3.4.6 [FreeBSD] 20060305
                                  gcc 4.2.1 20080123
                                  g++ 4.2.1 20080123
                                  gfortran 4.2.1 20080123

    IRIX64 6.5 (64 & n32)         MIPSpro cc 7.4.4m
                                  F90 MIPSpro 7.4.4m 
                                  C++ MIPSpro cc 7.4.4m

    Linux 2.6.9 (RHEL4)           Intel 10.0 compilers
    (abe.ncsa.uiuc.edu)

    Linux 2.4.21-47               gcc 3.2.3 20030502
    (osage)

    Linux 2.6.9-42.0.10           gcc,g++ 3.4.6 20060404, G95 (GCC 4.0.3) 
    (kagiso)                      PGI 7.1-6 (pgcc, pgf90, pgCC)
                                  Intel 9.1 (icc, ifort, icpc)

    Linux 2.6.16.27 x86_64 AMD    gcc 4.1.0 (SuSE Linux), g++ 4.1.0, 
    (smirom)                          g95 (GCC 4.0.3)
                                  PGI 7.1-6 (pgcc, pgf90, pgCC)
                                  Intel 9.1 (icc, ifort, icpc)

    Linux 2.6.5-7.252.1-rtgfx #1  Intel(R) C++ Version 9.0
          SMP ia64                Intel(R) Fortran Itanium(R) Version 9.0 
    (cobalt)                      SGI MPI

    SunOS 5.8 32,46               Sun WorkShop 6 update 2 C 5.3
     (Solaris 2.8)                Sun WorkShop 6 update 2 Fortran 95 6.2
                                  Sun WorkShop 6 update 2 C++ 5.3

    SunOS 5.10                    cc: Sun C 5.8 
    (linew)                       f90: Sun Fortran 95 8.2 
                                  CC: Sun C++ 5.8 

    Xeon Linux 2.4.21-32.0.1.ELsmp-perfctr-lustre
    (tungsten)                    gcc 3.2.2 20030222
                                  Intel(R) C++ Version 9.0
                                  Intel(R) Fortran Compiler Version 9.0

    IA-64 Linux 2.4.21.SuSE_309.tg1 ia64
    (NCSA tg-login)               gcc 3.2.2
                                  Intel(R) C++ Version 8.1
                                  Intel(R) Fortran Compiler Version 8.1
                                  mpich-gm-1.2.6..14b-intel-r2

    Intel 64 Linux 2.6.9-42.0.10.EL_lustre-1.4.10.1smp
    (abe)                         gcc 3.4.6 20060404
                                  Intel(R) C++ Version 10.0
                                  Intel (R) Fortran Compiler Version 10.0
                                  mvapich2-0.9.8p2patched-intel-ofed-1.2

    Windows XP                    Visual Studio .NET
                                  Visual Studio 2005 w/ Intel Fortran 9.1
                                  Cygwin(native gcc compiler and g95)
                                  MinGW(native gcc compiler and g95)

    Windows XP x64                Visual Studio 2005 w/ Intel Fortran 9.1

    Windows Vista                 Visual Studio 2005

    MAC OS  10.5.2 (Intel)        i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1
                                  GNU Fortran (GCC) 4.3.0 20070810
                                  G95 (GCC 4.0.3 (g95 0.91!) Apr 24 2008)


Supported Configuration Features Summary
========================================

    In the tables below
          y   = tested and supported
          n   = not supported or not tested in this release
          x   = not working in this release
          dna = does not apply
          ( ) = footnote appears below second table
          <blank> = testing incomplete on this feature or platform 

Platform                 C        F90    F90      C++   zlib  SZIP
                         parallel        parallel
SunOS5.10 64-bit         n        y      n        y     y     y
SunOS5.10 32-bit         n        y      n        y     y     y
IRIX64_6.5 64-bit        n        y      y        y     y     y
IRIX64_6.5 32-bit        n        n      n        n     y     y
Windows XP               n        y(15)  n(15)    y     y     y
Windows XP x64           n        y(15)  n(15)    y     y     y
Windows Vista            n        n      n        y     y     y
Mac OS X 10.5 Intel      n        y      n        y     y     y
FreeBSD 4.11             n        n      n        y     y     y
RedHat EL3  W       (3)  y(1)     y(10)  y(1)     y     y     y
RedHat EL3  W Intel (3)  n        y      n        y     y     n
RedHat EL3  W PGI   (3)  n        y      n        y     y     n
SuSe x86_64 gcc  (3,12)  y(2)     y(11)  y(2)     y     y     y
SuSe x86_64 Int  (3,12)  n        y(13)  n        y     y     n
SuSe x86_64 PGI  (3,12)  n        y(8)   n        y     y     y
Linux 2.4 Xeon C 
    Lustre Intel  (3,6)  n        y      n        y     y     n
Linux 2.6 SuSE ia64 C 
    Intel         (3,7)  y        y      y        y     y     n
Linux 2.6 SGI Altix 
    ia64 Intel      (3)  y        y      y        y     y     y
Linux 2.6 RHEL C
    Lustre Intel    (5)  y(4)     y      y(4)     y     y     n
Cray XT3 2.0.41          y        y      y        y     y     n


Platform                 Shared  Shared    Shared    Thread-  
                         C libs  F90 libs  C++ libs  safe     
Solaris2.10 64-bit       y       y         y         y        
Solaris2.10 32-bit       y       y         y         y        
IRIX64_6.5 64-bit        y       y         n         y        
IRIX64_6.5 32-bit        y       dna       y         y        
Windows XP               y       y(15)     y         y        
Windows XP x64           y       y(15)     y         y        
Windows Vista            y       n         n         y        
Mac OS X 10.3            y                           n        
FreeBSD 4.11             y       n         y         y        
RedHat EL3  W       (3)  y       y(10)     y         y        
RedHat EL3  W Intel (3)  y       y         y         n        
RedHat EL3  W PGI   (3)  y       y         y         n        
SuSe x86_64 W GNU (3,12) y       y         y         y        
SuSe x86_64 W Int (3,12) y       y         y         n        
SuSe x86_64 W PGI (3,12) y       y         y         n        
Linux 2.4 Xeon C 
    Lustre Intel    (6)  y       y         y         n        
Linux 2.4 SuSE 
    ia64 C Intel    (7)  y       y         y         n        
Linux 2.4 SGI Altix 
    ia64 Intel           y                           n        
Linux 2.6 RHEL C
    Lustre Intel    (5)  y        y        y         n
Cray XT3 2.0.41          n       n         n         n        n

    Notes: (1)  Using mpich2 1.0.6.
           (2)  Using mpich2 1.0.7.
           (3)  Linux 2.6 with GNU, Intel, and PGI compilers, as indicated.  
                  W or C indicates workstation or cluster, respectively.
           (4)  Using mvapich2 0.9.8.
           (5)  Linux 2.6.9-42.0.10.  Xeon cluster with ELsmp_perfctr_lustre 
                  and Intel compilers
           (6)  Linux 2.4.21-32.0.1.  Xeon cluster with ELsmp_perfctr_lustre 
                  and Intel compilers
           (7)  Linux 2.4.21, SuSE_292.till.  Ia64 cluster with Intel compilers
           (8)  pgf90
           (9)  With Compaq Visual Fortran 6.6c compiler.
           (10) With PGI and Absoft compilers.
           (11) PGI and Intel compilers for both C and Fortran
           (12) AMD Opteron x86_64
           (13) ifort
           (14) Yes with C and Fortran, but not with C++
           (15) Using Visual Studio 2005 or Cygwin
           (16) Not tested for this release.
    Compiler versions for each platform are listed in the preceding
    "Platforms Tested" table.


Known Problems
==============
* For Red Storm, a Cray XT3 system, the yod command sometimes gives the
  message,  "yod allocation delayed for node recovery".  This interferes with
  test suites that do not expect seeing this message.  See the section of "Red
  Storm" in file INSTALL_parallel for a way to deal with this problem.
  AKC - 2008/05/28

* For Red Storm, a Cray XT3 system, the tools/h5ls/testh5ls.sh will fail on
  the test "Testing h5ls -w80 -r -g tgroup.h5" fails.  This test is
  expected to fail and exit with a non-zero code but the yod command does
  not propagate the exit code of the executables. Yod always returns 0 if it
  can launch the executable.  The test suite shell expects a non-zero for
  this particular test, therefore it concludes the test has failed when it
  receives 0 from yod.  To bypass this problem for now, change the following
  lines in the tools/h5ls/testh5ls.sh.
  ======== Original =========
  # The following combination of arguments is expected to return an error message
  # and return value 1
  TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5
  ======== Skip the test =========
  echo SKIP TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5
  ======== end of bypass ========
  AKC - 2008/05/28

* We have discovered two problems when running collective IO parallel HDF5 
  tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a 
  Linux cluster at NCSA.

  Under some complex selection cases: 
  1) MPI_Get_element returns the wrong value.
  2) MPI_Type_struct also generates the wrong derived datatype and corrupt 
     data may be generated.
  These issues arise only when turning on collective IO with chunking storage 
  with some complex selections. We have not found these problems on other 
  MPI-IO compilers. If you encounter these problems, you may use independent 
  IO instead.

  To avoid this behavior, change the following line in your code
      H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_COLLECTIVE);
  to
      H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_INDEPENDENT);

  KY - 2007/08/24

* For SNL, spirit/liberty/thunderbird: The serial tests pass but parallel
  tests failed with MPI-IO file locking message. AKC - 2007/6/25

* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
  use -mp -O1 compilation flags to build the libraries. A higher level of 
  optimization causes failures in several HDF5 library tests. 

* For LLNL, uP: both serial and parallel tests pass.  
  Zeus: Serial tests pass but parallel tests fail with a known problem in MPI.
  ubgl: Serial tests pass but parallel tests fail. 

* Configuring with --enable-debug=all produces compiler errors on most
  platforms:  Users who want to run HDF5 in debug mode should use
  --enable-debug rather than --enable-debug=all to enable debugging
  information on most modules.

* On Mac OS 10.4, test/dt_arith.c has some errors in conversion from long
  double to (unsigned) long long and from (unsigned) long long to long double. 

* On Altix SGI with Intel 9.0, testmeta.c would not compile with -O3
  optimization flag.

* On VAX, the Scaleoffset filter is not supported.  The Scaleoffset filter 
  supports only the IEEE standard for floating-point data; it cannot be applied 
  to HDF5 data generated on VAX. 

* On Cray X1, a lone colon on the command line of h5dump --xml (as in
  the testh5dumpxml.sh script) is misinterpereted by the operating system
  and causes an error.

* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and 
  the application asks to do collective IO, we have found that when using 4 
  processors, a simple collective write will sometimes be hung. This can be 
  verified with t_mpi test under testpar.

* On IRIX6.5, when the C compiler version is greater than 7.4, complicated
  MPI derived datatype code will work. However, the user should increase
  the value of the MPI_TYPE_MAX environment variable to some appropriate value 
  to use collective irregular selection code.  For example, the current 
  parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test. 

* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
  with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
  There was a bug in the calculation of the Fletcher32 checksum in the 
  library before v1.6.3; the checksum value was not consistent between big-
  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
  However, after fixing the bug, the checksum value was no longer the same as 
  before on little-endian system.  Library releases after 1.6.4 can still read 
  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
  SLU - 2005/6/30

* For version 6 (6.02 and 6.04) of the Portland Group compiler on the AMD 
  Opteron processor, there is a bug in the compiler for optimization(-O2).  
  The library failed in several tests, all related to the MULTI driver.  
  The problem has been reported to the vendor.  

* On IBM AIX systems, parallel HDF5 mode will fail some tests with error
  messages like "INFO: 0031-XXX ...".  This is from the command `poe'.
  Set the environment variable MP_INFOLEVEL to 0 to minimize the messages
  and run the tests again.

  The tests may fail with messages like "The socket name is already in use",  
  but HDF5 does not use sockets.  This failure is due to problems with the 
  poe command trying to set up the debug socket.  To resolve this problem, 
  check to see whether there are many old /tmp/s.pedb.* files staying around.  
  These are sockets used by the poe command and left behind due to failed 
  commands.  First, ask your system administrator to clean them out.  
  Lastly, request IBM to provide a means to run poe without the debug socket.

* The --enable-static-exec configure flag fails to compile for Solaris
  platforms. This is due to the fact that not all of the system libraries on 
  Solaris are available in a static format.

  The --enable-static-exec configure flag also fails to correctly compile
  on IBM SP2 platforms for serial mode. The parallel mode works fine with 
  this option.
  
  It is suggested that you do not use this option on these platforms
  during configuration.

* With the gcc 2.95.2 compiler, HDF5 uses the `-ansi' flag during
  compilation. The ANSI version of the compiler complains about not being
  able to handle the `long long' datatype with the warning:

        warning: ANSI C does not support `long long'
  
  This warning is innocuous and can be safely ignored.

* The ./dsets tests fail on the TFLOPS machine if the test program,
  dsets.c, is compiled with the -O option.  The HDF5 library still works
  correctly with the -O option.  The test program works fine if it is
  compiled with -O1 or -O0.  Only -O (same as -O2) causes the test
  program to fail.

* Not all platforms behave correctly with Szip's shared libraries. Szip is
  disabled in these cases, and a message is relayed at configure time. Static
  libraries should be working on all systems that support Szip and should be
  used when shared libraries are unavailable. 

  There is also a configure error on Altix machines that incorrectly reports 
  when a version of Szip without an encoder is being used.

* On some platforms that use Intel and Absoft compilers to build the HDF5 
  Fortran library, compilation may fail for fortranlib_test.f90, fflush1.f90 
  and fflush2.f90 complaining about the exit subroutine. Comment out the line 
  IF (total_error .ne. 0) CALL exit (total_error).

* Information about building with PGI and Intel compilers is available in
  the INSTALL file sections 4.7 and 4.8.

* On at least one system, SDSC DataStar, the scheduler (in this case
  LoadLeveler) sends job status updates to standard error when you run 
  any executable that was compiled with the parallel compilers.

  This causes problems when running "make check" on parallel builds, as 
  many of the tool tests function by saving the output from test runs,
  and comparing it to an exemplar.  

  The best solution is to reconfigure the target system so it no longer
  inserts the extra text.  However, this may not be practical.

  In such cases, one solution is to "setenv HDF5_Make_Ignore yes" prior to 
  the configure and build.  This will cause "make check" to continue after 
  detecting errors in the tool tests.  However, in the case of SDSC DataStar,
  it also leaves you with some 150 "failed" tests to examine by hand.

  A second solution is to write a script to run serial tests and filter
  out the text added by the scheduler.  A sample script used on SDSC
  DataStar is given below, but you will probably have to customize it 
  for your installation.  

  Observe that the basic idea is to insert the script as the first item 
  on the command line which executes the the test.  The script then 
  executes the test and filters out the offending text before passing
  it on.

        #!/bin/csh

        set STDOUT_FILE=~/bin/serial_filter.stdout
        set STDERR_FILE=~/bin/serial_filter.stderr

        rm -f $STDOUT_FILE $STDERR_FILE

        ($* > $STDOUT_FILE) >& $STDERR_FILE

        set RETURN_VALUE=$status

        cat $STDOUT_FILE

        tail +3 $STDERR_FILE

        exit $RETURN_VALUE

  You get the HDF5 make files and test scipts to execute your filter script
  by setting the environment variable "RUNSERIAL" to the full path of the 
  script prior to running configure for parallel builds.  Remember to 
  "unsetenv RUNSERIAL" before running configure for a serial build.

  Note that the RUNSERIAL environment variable exists so that we can 
  prefix serial runs as necessary on the target system.  On DataStar,
  no prefix is necessary.  However on an MPICH system, the prefix might
  have to be set to something like "/usr/local/mpi/bin/mpirun -np 1" to
  get the serial tests to run at all.

  In such cases, you will have to include the regular prefix in your
  filter script.

* H5Ocopy() does not copy reg_ref attributes correctly when shared-message
  is turn on. The value of the reference in the destination attriubte is
  wrong. This H5Ocopy problem will affect the h5copy tool.

* In the C++ API, it appears that there are bugs in Attribute::write/read
  and DataSet::write/read for fixed- and variable-len strings.  The problems
  are being worked on and a patch will be provided when the fixes are
  available.


%%%%1.8.0%%%%   


HDF5 version 1.8.0 released on Tue Feb 12 20:41:19 CST 2008
================================================================================

INTRODUCTION
============

This document describes the differences between the HDF5-1.6.x release series
and HDF5 1.8.0, and contains information on the platforms tested and known 
problems in HDF5-1.8.0.  For more details, see the HISTORY-1_0-1_8_0_rc3.txt
file in the 
release_docs/ directory of the HDF5 source.

Links to the HDF5 1.8.0 source code, documentation, and additional materials
can be found on the HDF5 web page at:

     http://www.hdfgroup.org/products/hdf5/

The HDF5 1.8.0 release can be obtained from:

     http://www.hdfgroup.org/HDF5/release/obtain5.html

User documentation for 1.8.0 can be accessed directly at this location: 

     http://www.hdfgroup.org/HDF5/doc/

New features in 1.8.0, including brief general descriptions of some new 
and modified APIs, are described in the "What's New in 1.8.0?" document:

     http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html

All new and modified APIs are listed in detail in the "HDF5 Software Changes 
from Release to Release" document, in the section "Release 1.8.0 (current 
release) versus Release 1.6.x":

     http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

If you have any questions or comments, please send them to the HDF Help Desk:

     help@hdfgroup.org


CONTENTS
========

- New Features
- Removed Feature
- Support for new platforms and languages
- Bug Fixes since HDF5-1.6.0
- Platforms Tested
- Supported Configuration Features Summary
- Known Problems


New Features
============

   HDF5 Release 1.8.0 is a major release with many changes and new features.

   New format and interface features discussed in the "What's New in 
   HDF5 1.8.0" document include the following:

       Enhanced group object management
       Enhanced attribute management and more efficient meta data handling
       Expanded datatype features
       Creation order tracking and indexing
       Improved meta data caching and cache control
       UTF-8 encoding
       New I/O filters: n-bit and scale+offset compression
       New link (H5L) and object (H5O) interfaces and features
       External and user-defined links
       New high-level APIs: 
           HDF5 Packet Table (H5PT) and HDF5 Dimension Scale (H5DS)
       C++ and Fortran interfaces for older high-level APIs:
           H5Lite (H5LT), H5Image (H5IM), and H5Table (H5TB)
       New and improved tools
       And more...

       http://hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html


    New APIs associated with these features, other interface changes 
    (e.g., ENUM and struct definitions), and new library configuration flags
    are listed in the "Release 1.8.0 (current release) versus Release 1.6.x" 
    section of "HDF5 Software Changes from Release to Release."

        http://hdfgroup.org/HDF5/doc/ADGuide/Changes.html

Compatibility
-------------
    Many HDF5 users and user communities have existing applications that 
    they may wish to port to Release 1.8.0.  Alternatively, some users may 
    wish to take advantage of Release 1.8.0's improved performance without
    having to port such applications.  To facilitate managing application
    compatibility and porting applications from release to release, the HDF 
    Team has implemented the following features:
        Individually-configurable macros that selectively map common 
            interface names to the old and new interfaces
        Library configuration options to configure the macro mappings

    Two related documents accompany this release:
        "API Compatibility Macros in HDF5" discusses the specifics of the 
        new individually-configurable macros and library configuration 
        options.
        http://hdfgroup.org/HDF5/doc/RM/APICompatMacros.html
 
        "New Features in HDF5 Release 1.8.0 and Backward/Forward Format
        Compatibility Issues" discusses each new feature with regard to 
        its impact on format compatibility.
        http://hdfgroup.org/HDF5/doc/ADGuide/CompatFormat180.html

Referenced documents
--------------------
    http://hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
        "What's New in HDF5 1.8.0"

    http://hdfgroup.org/HDF5/doc/ADGuide/Changes.html
        The "Release 1.8.0 (current release) versus Release 1.6.x "
        section in "HDF5 Software Changes from Release to Release"

    http://hdfgroup.org/HDF5/doc/RM/APICompatMacros.html
        "API Compatibility Macros in HDF5"

    http://hdfgroup.org/HDF5/doc/ADGuide/CompatFormat180.html
        "New Features in HDF5 Release 1.8.0 and Backward/Forward Format
        Compatibility Issues"


Removed Feature
===============
The stream virtual file driver (H5FD_STREAM) have been removed in this 
release. This affects the functions H5Pset_fapl_stream and H5Pget_fapl_stream 
and the constant H5FD_STREAM.

This virtual file driver will be available at 
http://hdf5-addons.origo.ethz.ch/. Note that at the time of this release, 
the transition is still in progress; the necessary integration tools may 
not be available when HDF5 Release 1.8.0 first comes out.


Support for New Platforms, Languages, and Compilers
===================================================
    - Support for Open VMS 7.3 was added.


Bug Fixes since HDF5-1.6.0 
==========================
    This release contains numerous bug fixes. For details, see the 
    "Changes from 1.6.0 to 1.8.0-rc3" section of the HISTORY.txt file for
    this release.


Platforms Tested
================
The following platforms and compilers have been tested for for this release.

    AIX 5.2 (32/64 bit)           xlc 8.0.0.11
                                  xlC 8.0
                                  xlf 10.01.0000.0 
                                  mpcc_r 6.0.0.8
                                  mpxlf_r 8.1.1.7

    FreeBSD 6.2-STABLE i386       gcc 3.4.6 [FreeBSD] 20060305
    (duty)                        g++ 3.4.6 [FreeBSD] 20060305
                                  gcc 4.2.1 20080123
                                  g++ 4.2.1 20080123
                                  gfortran 4.2.1 20070620

    FreeBSD 6.2-STABLE amd64      gcc 3.4.6 [FreeBSD] 20060305
    (liberty)                     g++ 3.4.6 [FreeBSD] 20060305
                                  gcc 4.2.1 20080123
                                  g++ 4.2.1 20080123
                                  gfortran 4.2.1 20080123

    IRIX64 6.5 (64 & n32)         MIPSpro cc 7.4.4m
                                  F90 MIPSpro 7.4.4m 
                                  C++ MIPSpro cc 7.4.4m

    Linux 2.6.9 (RHEL4)           Intel 10.0 compilers
    (abe.ncsa.uiuc.edu)

    Linux 2.4.21-47               gcc 3.2.3 20030502
    (osage)

    Linux 2.6.9-42.0.10           gcc 3.4.6 20060404
    (kagiso)                      PGI 7.0-7 (pgcc, pgf90, pgCC)
                                  Intel 9.1 (icc, ifort, icpc)

    Linux 2.6.16.27 x86_64 AMD    gcc 4.1.0 (SuSE Linux), g++ 4.1.0, 
    (smirom)                          g95 (GCC 4.0.3)
                                  PGI 6.2-5 (pgcc, pgf90, pgCC)
                                  Intel 9.1 (icc, iort, icpc)

    Linux 2.6.5-7.252.1-rtgfx #1  Intel(R) C++ Version 9.0
          SMP ia64                Intel(R) Fortran Itanium(R) Version 9.0 
    (cobalt)                      SGI MPI

    SunOS 5.8 32,46               Sun WorkShop 6 update 2 C 5.3
     (Solaris 2.8)                Sun WorkShop 6 update 2 Fortran 95 6.2
                                  Sun WorkShop 6 update 2 C++ 5.3

    SunOS 5.10                    cc: Sun C 5.8 
    (linew)                       f90: Sun Fortran 95 8.2 
                                  CC: Sun C++ 5.8 

    Xeon Linux 2.4.21-32.0.1.ELsmp-perfctr-lustre
    (tungsten)                    gcc 3.2.2 20030222
                                  Intel(R) C++ Version 9.0
                                  Intel(R) Fortran Compiler Version 9.0

    IA-64 Linux 2.4.21.SuSE_292.til1 ia64
    (NCSA tg-login)               gcc 3.2.2
                                  Intel(R) C++ Version 8.1
                                  Intel(R) Fortran Compiler Version 8.1
                                  mpich-gm-1.2.5..10-intel-r2

    Windows XP                    Visual Studio .NET
                                  Visual Studio 2005 w/ Intel Fortran 9.1
                                  Cygwin(native gcc compiler and g95)
                                  MinGW(native gcc compiler and g95)

    Windows XP x64                Visual Studio 2005 w/ Intel Fortran 9.1

    Windows Vista                 Visual Studio 2005

    MAC OS  10.4 (Intel)          gcc i686-apple-darwin8-gcc-4.0.1 (GCC) 4.0.1 
                                  G95 (GCC 4.0.3 (g95 0.91!) Nov 21 2006)

    Alpha Open VMS 7.3            Compaq C V6.5-001-48BCD
                                  HP Fortran V7.6-3276
                                  Compaq C++ V6.5-004


Supported Configuration Features Summary
========================================

    In the tables below
          y   = tested and supported
          n   = not supported or not tested in this release
          x   = not working in this release
          dna = does not apply
          ( ) = footnote appears below second table
          <blank> = testing incomplete on this feature or platform 

Platform                 C        F90    F90      C++   zlib  SZIP
                         parallel        parallel
SunOS5.8 64-bit          n        y      n        y     y     y
SunOS5.8 32-bit          n        y      n        y     y     y
SunOS5.10 64-bit         y(1)     y      n        y     y     y
SunOS5.10 32-bit         y(1)     y      n        y     y     y
IRIX64_6.5 64-bit        n        y      y        y     y     y
IRIX64_6.5 32-bit        n        n      n        n     y     y
AIX-5.2  32-bit          y        y      y        y     y     y
AIX-5.2  64-bit          y        y      y        y     y     y
Windows XP               n        y(15)  n(15)    y     y     y
Windows XP x64           n        y(15)  n(15)    y     y     y
Windows Vista            n        n      n        y     y     y
Mac OS X 10.4 PowerPC    n               n
Mac OS X 10.4 Intel      n        y      n        y     y     y
FreeBSD 4.11             n        n      n        y     y     y
RedHat EL3  W       (3)  y(1a)    y(10)  y(1a)    y     y     y
RedHat EL3  W Intel (3)  n        y      n        y     y     n
RedHat EL3  W PGI   (3)  n        y      n        y     y     n
SuSe x86_64 gcc  (3,12)  y(1a)    y(11)  n        y     y     y
SuSe x86_64 Int  (3,12)  n        y(13)  n        y     y     n
SuSe x86_64 PGI  (3,12)  n        y(8)   n        y     y     y
Linux 2.4 Xeon C 
    Lustre Intel  (3,6)  n        y      n        y     y     n
Linux 2.6 SuSE ia64 C 
    Intel         (3,7)  y        y      y        y     y     n
Linux 2.6 SGI Altix 
    ia64 Intel      (3)  y        y      y        y     y     y
Alpha OpenVMS 7.3.2      n        y      n        y     n     n



Platform                 Shared  Shared    Shared    static-  Thread-  
                         C libs  F90 libs  C++ libs  exec     safe     
Solaris2.8 64-bit        y       y         y         x        y        
Solaris2.8 32-bit        y       y         y         x        y        
Solaris2.10 64-bit       y                           x        y        
Solaris2.10 32-bit       y                           x        y        
IRIX64_6.5 64-bit        y       y         n         y        y        
IRIX64_6.5 32-bit        y       dna       y         y        y        
AIX-5.2 & 5.3 32-bit     n       n         n         y        n        
AIX-5.2 & 5.3 64-bit     n       n         n         y        n        
Windows XP               y       y(15)     y         y        y        
Windows XP x64           y       y(15)     y         y        y        
Windows Vista            y       n         n         y        y        
Mac OS X 10.3            y                           y        n        
FreeBSD 4.11             y       n         y         y        y        
RedHat EL3  W       (3)  y       y(10)     y         y        y        
RedHat EL3  W Intel (3)  y       y         y         y        n        
RedHat EL3  W PGI   (3)  y       y         y         y        n        
SuSe x86_64 W GNU (3,12) y       y         y         y        y        
SuSe x86_64 W Int (3,12) y       y         y         y(14)    n        
SuSe x86_64 W PGI (3,12) y       y         y         y(14)    n        
Linux 2.4 Xeon C 
    Lustre Intel    (6)  y       y         y         y        n        
Linux 2.4 SuSE 
    ia64 C Intel    (7)  y       y         y         y        n        
Linux 2.4 SGI Altix 
    ia64 Intel           y                           y        n        
Alpha OpenVMS 7.3.2      n       n         n         y        n        

    Notes: (1)  Using mpich 1.2.6.
           (1a) Using mpich2 1.0.6.
           (2)  Using mpt and mpich 1.2.6.
           (3)  Linux 2.6 with GNU, Intel, and PGI compilers, as indicated.  
                  W or C indicates workstation or cluster, respectively.

           (6)  Linux 2.4.21-32.0.1.  Xeon cluster with ELsmp_perfctr_lustre 
                  and Intel compilers
           (7)  Linux 2.4.21, SuSE_292.till.  Ia64 cluster with Intel
compilers
           (8)  pgf90
           (9)  With Compaq Visual Fortran 6.6c compiler.
           (10) With PGI and Absoft compilers.
           (11) PGI and Intel compilers for both C and Fortran
           (12) AMD Opteron x86_64
           (13) ifort
           (14) Yes with C and Fortran, but not with C++
	   (15) Using Visual Studio 2005 or Cygwin
           (16) Not tested for this release.
    Compiler versions for each platform are listed in the preceding
    "Platforms Tested" table.


Known Problems
==============
* We have discovered two problems when running collective IO parallel HDF5 
  tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a 
  Linux cluster at NCSA.

  Under some complex selection cases: 
  1) MPI_Get_element returns the wrong value.
  2) MPI_Type_struct also generates the wrong derived datatype and corrupt 
     data may be generated.
  These issues arise only when turning on collective IO with chunking storage 
  with some complex selections. We have not found these problems on other 
  MPI-IO compilers. If you encounter these problems, you may use independent 
  IO instead.

  To avoid this behavior, change the following line in your code
      H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_COLLECTIVE);

  to
      H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_INDEPENDENT);

  KY - 2007/08/24

* For SNL, spirit/liberty/thunderbird: The serial tests pass but parallel
  tests failed with MPI-IO file locking message. AKC - 2007/6/25

* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
  use -mp -O1 compilation flags to build the libraries. A higher level of 
  optimization causes failures in several HDF5 library tests. 

* For SNL, Red Storm: Only parallel HDF5 is supported.  The serial tests pass
  when run against the parallel library; the parallel tests also pass, but
  with lots of non-fatal error messages.

* For LLNL, uP: both serial and parallel tests pass.  
  Zeus: Serial tests pass but parallel tests fail with a known problem in MPI.
  ubgl: Serial tests pass but parallel tests fail. 

* On SUN 5.10 C++, testing fails in the "Testing Shared Datatypes with 
  Attributes" test. 

* Configuring with --enable-debug=all produces compiler errors on most
  platforms:  Users who want to run HDF5 in debug mode should use
  --enable-debug rather than --enable-debug=all to enable debugging
  information on most modules.

* On Mac OS 10.4, test/dt_arith.c has some errors in conversion from long
  double to (unsigned) long long and from (unsigned) long long to long double. 

* On Altix SGI with Intel 9.0, testmeta.c would not compile with -O3
  optimization flag.

* On VAX, the Scaleoffset filter is not supported. The filter cannot be 
  applied to HDF5 data generated on VAX. The Scaleoffset filter only supports 
  the IEEE standard for floating-point data.

* On Cray X1, a lone colon on the command line of h5dump --xml (as in
  the testh5dumpxml.sh script) is misinterpereted by the operating system
  and causes an error.

* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and 
  the application asks to do collective IO, we have found that when using 4 
  processors, a simple collective write will sometimes be hung. This can be 
  verified with t_mpi test under testpar.

* On IRIX6.5, when the C compiler version is greater than 7.4, complicated
  MPI derived datatype code will work. However, the user should increase
  the value of the MPI_TYPE_MAX environment variable to some appropriate value 
  to use collective irregular selection code.  For example, the current 
  parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test. 

* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
  with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
  There was a bug in the calculating code of the Fletcher32 checksum in the 
  library before v1.6.3; the checksum value was not consistent between big-
  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
  However, after fixing the bug, the checksum value was no longer the same as 
  before on little-endian system.  Library releases after 1.6.4 can still read 
  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
  SLU - 2005/6/30

* For version 6 (6.02 and 6.04) of the Portland Group compiler on the AMD 
  Opteron processor, there is a bug in the compiler for optimization(-O2).  
  The library failed in several tests, all related to the MULTI driver.  
  The problem has been reported to the vendor.  

* On IBM AIX systems, parallel HDF5 mode will fail some tests with error
  messages like "INFO: 0031-XXX ...".  This is from the command `poe'.
  Set the environment variable MP_INFOLEVEL to 0 to minimize the messages
  and run the tests again.

  The tests may fail with messages like "The socket name is already in use",  
  but HDF5 does not use sockets.  This failure is due to problems with the 
  poe command trying to set up the debug socket.  To resolve this problem, 
  check to see whether there are many old /tmp/s.pedb.* files staying around.  
  These are sockets used by the poe command and left behind due to failed 
  commands.  First, ask your system administrator to clean them out.  
  Lastly, request IBM to provide a means to run poe without the debug socket.

* The --enable-static-exec configure flag fails to compile for Solaris
  platforms. This is due to the fact that not all of the system libraries on 
  Solaris are available in a static format.

  The --enable-static-exec configure flag also fails to correctly compile
  on IBM SP2 platform for the serial mode. The parallel mode works fine with 
  this option.
  
  It is suggested that you do not use this option on these platforms
  during configuration.

* With the gcc 2.95.2 compiler, HDF5 uses the `-ansi' flag during
  compilation. The ANSI version of the compiler complains about not being
  able to handle the `long long' datatype with the warning:

        warning: ANSI C does not support `long long'
  
  This warning is innocuous and can be safely ignored.

* The ./dsets tests fail on the TFLOPS machine if the test program,
  dsets.c, is compiled with the -O option.  The HDF5 library still works
  correctly with the -O option.  The test program works fine if it is
  compiled with -O1 or -O0.  Only -O (same as -O2) causes the test
  program to fail.

* Not all platforms behave correctly with Szip's shared libraries. Szip is
  disabled in these cases, and a message is relayed at configure time. Static
  libraries should be working on all systems that support Szip and should be
  used when shared libraries are unavailable. 

  There is also a configure error on Altix machines that incorrectly reports 
  when a version of Szip without an encoder is being used.

* On some platforms that use Intel and Absoft compilers to build the HDF5 
  Fortran library, compilation may fail for fortranlib_test.f90, fflush1.f90 
  and fflush2.f90 complaining about the exit subroutine. Comment out the line 
  IF (total_error .ne. 0) CALL exit (total_error).

* Information about building with PGI and Intel compilers is available in
  the INSTALL file sections 4.7 and 4.8.

* On at least one system, SDSC DataStar, the scheduler (in this case
  LoadLeveler) sends job status updates to standard error when you run 
  any executable that was compiled with the parallel compilers.

  This causes problems when running "make check" on parallel builds, as 
  many of the tool tests function by saving the output from test runs,
  and comparing it to an exemplar.  

  The best solution is to reconfigure the target system so it no longer
  inserts the extra text.  However, this may not be practical.

  In such cases, one solution is to "setenv HDF5_Make_Ignore yes" prior to 
  the configure and build.  This will cause "make check" to continue after 
  detecting errors in the tool tests.  However, in the case of SDSC DataStar,
  it also leaves you with some 150 "failed" tests to examine by hand.

  A second solution is to write a script to run serial tests and filter
  out the text added by the scheduler.  A sample script used on SDSC
  DataStar is given below, but you will probably have to customize it 
  for your installation.  

  Observe that the basic idea is to insert the script as the first item 
  on the command line which executes the the test.  The script then 
  executes the test and filters out the offending text before passing
  it on.

        #!/bin/csh

        set STDOUT_FILE=~/bin/serial_filter.stdout
        set STDERR_FILE=~/bin/serial_filter.stderr

        rm -f $STDOUT_FILE $STDERR_FILE

        ($* > $STDOUT_FILE) >& $STDERR_FILE

        set RETURN_VALUE=$status

        cat $STDOUT_FILE

        tail +3 $STDERR_FILE

        exit $RETURN_VALUE

  You get the HDF5 make files and test scipts to execute your filter script
  by setting the environment variable "RUNSERIAL" to the full path of the 
  script prior to running configure for parallel builds.  Remember to 
  "unsetenv RUNSERIAL" before running configure for a serial build.

  Note that the RUNSERIAL environment variable exists so that we can 
  can prefix serial runs as necessary on the target system.  On DataStar,
  no prefix is necessary.  However on an MPICH system, the prefix might
  have to be set to something like "/usr/local/mpi/bin/mpirun -np 1" to
  get the serial tests to run at all.

  In such cases, you will have to include the regular prefix in your
  filter script.

* H5Ocopy() does not copy reg_ref attributes correctly when shared-message
  is turn on. The value of the reference in the destination attriubte is
  wrong. This H5Ocopy problem will affect the h5copy tool.