path: root/release_docs/RELEASE.txt

HDF5 version 1.10.6-snap2 currently under development
================================================================================


INTRODUCTION

This document describes the differences between this release and the previous
HDF5 release. It contains information on the platforms tested and known
problems in this release. For more details check the HISTORY*.txt files in the
HDF5 source.

Note that documentation in the links below will be updated at the time of each
final release.

Links to HDF5 documentation can be found on The HDF5 web page:

     https://portal.hdfgroup.org/display/HDF5/HDF5

The official HDF5 releases can be obtained from:

     https://www.hdfgroup.org/downloads/hdf5/

Changes from Release to Release and New Features in the HDF5-1.10.x release series
can be found at:

     https://portal.hdfgroup.org/display/HDF5/HDF5+Application+Developer%27s+Guide

If you have any questions or comments, please send them to the HDF Help Desk:

     help@hdfgroup.org


CONTENTS

- New Features
- Support for new platforms and languages
- Bug Fixes since HDF5-1.10.5
- Supported Platforms
- Tested Configuration Features Summary
- More Tested Platforms
- Known Problems
- CMake vs. Autotools installations


New Features
============

    Configuration:
    -------------
    - Update CMake tests to use FIXTURES

      CMake test fixtures allow setup/cleanup tests and other dependency
      requirements as properties for tests. This is more flexible for
      modern CMake code.

      (ADB - 2019/07/23, HDFFV-10529)

    - Windows PDB files are always installed

      There are build configuration or flag settings for Windows that may not
      generate PDB files. If those files are not generated then the install
      utility will fail because those PDB files are not found. An optional
      variable, DISABLE_PDB_FILES, was added to not install PDB files.

      (ADB - 2019/07/17, HDFFV-10424)

    - Add mingw CMake support with a toolchain file

      There has been a number of mingw issues that has been linked under
      HDFFV-10845. It has been decided to implement the CMake cross-compiling
      technique of toolchain files. We will use a linux platform with the mingw
      compiler stack for testing. Only the C language is fully supported, and
      the error tests are skipped. The C++ language works for static but shared
      builds has a shared library issue with the mingw Standard Exception Handling
      library, which is not available on Windows. Fortran has a common cross-compile
      problem with the fortran configure tests.

      (ADB - 2019/07/12, HDFFV-10845, HDFFV-10595)

    - Windows PDB files are installed incorrectly

      For static builds, the PDB files for windows should be installed next
      to the static libraries in the lib folder. Also the debug versions of
      libraries and PDB files are now correctly built using the default
      CMAKE_DEBUG_POSTFIX setting.

      (ADB - 2019/07/09, HDFFV-10581)

    - Add option to build only shared libs

      A request was made to prevent building static libraries and only build
      shared.  A new option was added to CMake, ONLY_SHARED_LIBS, which will
      skip building static libraries. Certain utility functions will build with
      static libs but are not published. Tests are adjusted to use the correct
      libraries depending on SHARED/STATIC settings.

      (ADB - 2019/06/12, HDFFV-10805)

    - Add options to enable or disable building tools and tests

      Configure options --enable-tests and --enable-tools were added for
      autotools configure.  These options are enabled by default, and can be
      disabled with either --disable-tests (or tools) or --enable-tests=no
      (or --enable-tools=no).  Build time is reduced ~20% when tools are
      disabled, 35% when tests are disabled, 45% when both are disabled.
      Reenabling them after the initial build requires running configure
      again with the option(s) enabled.

      (LRK - 2019/06/12, HDFFV-9976)

    - Change tools test that test the error stack

      There are some use cases which can cause the error stack of tools to be
      different then the expected output. These tests now use grepTest.cmake,
      this was changed to allow the error file to be searched for an expected string.

      (ADB - 2019/04/15, HDFFV-10741)


    Library:
    --------
    -

     Parallel Library:
    -----------------
    -

    C++ Library:
    ------------
    - Added new wrappers for H5Pset/get_create_intermediate_group()
        LinkCreatPropList::setCreateIntermediateGroup()
        LinkCreatPropList::getCreateIntermediateGroup()

      (BMR - 2019/04/22, HDFFV-10622)


    Java Library:
    ----------------
    - Fix a failure in JUnit-TestH5P on 32-bit architectures

      (JTH - 2019/04/30)


    Tools:
    ------
    -

    High-Level APIs:
    ---------------
    -

    C Packet Table API
    ------------------
    -

    Internal header file
    --------------------
    -

    Documentation
    -------------
    -

Support for new platforms, languages and compilers.
=======================================
    -

Bug Fixes since HDF5-1.10.5 release
==================================

    Library
    -------
    - Fixed a bug caused by bad tag value when condensing object header
      messages

      There was an assertion failure when moving meessages from running a
      user test program with library release hdf5.1.10.4. It was because
      the tag value (object header's address) was not set up when entering
      the library routine H5O__chunk_update_idx(), which will eventually 
      verifies the metadata tag value when protecting the object header.

      The problem was fixed by replacing FUNC_ENTER_PACKAGE in H5O__chunk_update_idx() 
      with FUNC_ENTER_PACKAGE_TAG(oh->cache_info.addr) to set up the metadata tag.

      (VC - 2019/08/23, HDFFV-10873)

    - Fixed the test failure from test_metadata_read_retry_info() in
      test/swmr.c

      The test failure is due to the incorrect number of bins returned for
      retry info (info.nbins).  The # of bins expected for 101 read attempts
      is 3 instead of 2.  The routine H5F_set_retries() in src/H5Fint.c
      calculates the # of bins by first obtaining the log10 value for
      (read attempts - 1).  For PGI/19, the log10 value for 100 read attempts
      is 1.9999999999999998 instead of 2.00000.  When casting the log10 value
      to unsigned later on, the decimal part is chopped off causing the test
      failure.

      This was fixed by obtaining the rounded integer value (HDceil) for the 
      log10 value of read attempts first before casting the result to unsigned.

      (VC - 2019/8/14, HDFFV-10813)

    - Fixed an issue where creating a file with non-default file space info
      together with library high bound setting to H5F_LIBVER_V18.

      When setting non-default file space info in fcpl via
      H5Pset_file_space_strategy() and then creating a file with
      both high and low library bounds set to
      H5F_LIBVER_V18 in fapl, the library succeeds in creating the file.
      File creation should fail because the feature of setting non-default
      file space info does not exist in library release 1.8 or earlier.

      This was fixed by setting and checking the proper version in the
      file space info message based on the library low and high bounds
      when creating and opening the HDF5 file.

      (VC - 2019/6/25, HDFFV-10808)

    - Fixed an issue where copying a version 1.8 dataset between files using
      H5Ocopy fails due to an incompatible fill version

      When using the HDF5 1.10.x H5Ocopy() API call to copy a version 1.8
      dataset to a file created with both high and low library bounds set to
      H5F_LIBVER_V18, the H5Ocopy() call will fail with the error stack indicating
      that the fill value version is out of bounds.

      This was fixed by changing the fill value message version to H5O_FILL_VERSION_3
      (from H5O_FILL_VERSION_2) for H5F_LIBVER_V18.

      (VC - 2019/6/14, HDFFV-10800)

    - Fixed a bug that would cause an error or cause fill values to be
      incorrectly read from a chunked dataset using the "single chunk" index if
      the data was held in cache and there was no data on disk.

      (NAF - 2019/03/06)

    - Fixed a bug that could cause an error or cause fill values to be
      incorrectly read from a dataset that was written to using H5Dwrite_chunk
      if the dataset was not closed after writing.

      (NAF - 2019/03/06, HDFFV-10716)

    - Fixed memory leak in scale offset filter

      In a special case where the MinBits is the same as the number of bits in
      the datatype's precision, the filter's data buffer was not freed, causing
      the memory usage to grow. In general the buffer was freed correctly.  The
      Minbits are the minimal number of bits to store the data values.  Please
      see the reference manual for H5Pset_scaleoffset for the detail.

      (RL - 2019/3/4, HDFFV-10705)

    - fcntl(2)-based file locking incorrectly passed the lock argument struct
      instead of a pointer to the struct, causing errors on systems where
      flock(2) is not available.

      File locking is used when files are opened to enforce SWMR semantics. A
      lock operation takes place on all file opens unless the
      HDF5_USE_FILE_LOCKING environment variable is set to the string "FALSE".
      flock(2) is preferentially used, with fcntl(2) locks as a backup if
      flock(2) is unavailable on a system (if neither is available, the lock
      operation fails). On these systems, the file lock will often fail, which
      causes HDF5 to not open the file and report an error.

      This bug only affects POSIX systems. Win32 builds on Windows use a no-op
      locking call which always succeeds. Systems which exhibit this bug will
      have H5_HAVE_FCNTL defined but not H5_HAVE_FLOCK in the configure output.

      This bug affects HDF5 1.10.0 through 1.10.5.

      fcntl(2)-based file locking now correctly passes the struct pointer.

      (DER - 2019/08/27, HDFFV-10892)


    Java Library:
    ----------------
    -

    Configuration
    -------------
    - Correct option for default API version

      CMake options for default API version are not mutually exclusive.
      Change the multiple BOOL options to a single STRING option with the
      strings; v16, v18, v110.

      (ADB - 2019/08/12, HDFFV-10879)

    Fortran
    --------
    -

    Tools
    -----
    -

    High-Level APIs:
    ------
    -

    Fortran High-Level APIs:
    ------
    -

    Documentation
    -------------
    -

    F90 APIs
    --------
    -

    C++ APIs
    --------
    -

    Testing
    -------
    -


Supported Platforms
===================

    Linux 2.6.32-696.16.1.el6.ppc64 gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-18)
    #1 SMP ppc64 GNU/Linux        g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-18)
    (ostrich)                     GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-18)
                                  IBM XL C/C++ V13.1
                                  IBM XL Fortran V15.1

    Linux 3.10.0-327.10.1.el7   GNU C (gcc), Fortran (gfortran), C++ (g++)
    #1 SMP x86_64 GNU/Linux       compilers:
    (kituo/moohan)                Version 4.8.5 20150623 (Red Hat 4.8.5-4)
                                    Version 4.9.3, Version 5.2.0
                                  Intel(R) C (icc), C++ (icpc), Fortran (icc)
                                  compilers:
                                     Version 17.0.0.098 Build 20160721
                                  MPICH 3.1.4 compiled with GCC 4.9.3

    SunOS 5.11 32- and 64-bit     Sun C 5.12 SunOS_sparc
    (emu)                         Sun Fortran 95 8.6 SunOS_sparc
                                  Sun C++ 5.12 SunOS_sparc

    Windows 7                     Visual Studio 2015 w/ Intel Fortran 16 (cmake)

    Windows 7 x64                 Visual Studio 2013
                                  Visual Studio 2015 w/ Intel Fortran 16 (cmake)
                                  Visual Studio 2015 w/ Intel C, Fortran 2018 (cmake)
                                  Visual Studio 2015 w/ MSMPI 8 (cmake)

    Windows 10                    Visual Studio 2015 w/ Intel Fortran 18 (cmake)

    Windows 10 x64                Visual Studio 2015 w/ Intel Fortran 18 (cmake)
                                  Visual Studio 2017 w/ Intel Fortran 18 (cmake)

    Mac OS X Yosemite 10.10.5     Apple clang/clang++ version 6.1 from Xcode 7.0
    64-bit                        gfortran GNU Fortran (GCC) 4.9.2
    (osx1010dev/osx1010test)      Intel icc/icpc/ifort version 15.0.3

    Mac OS X El Capitan 10.11.6   Apple clang/clang++ version 7.3.0 from Xcode 7.3
    64-bit                        gfortran GNU Fortran (GCC) 5.2.0
    (osx1011dev/osx1011test)      Intel icc/icpc/ifort version 16.0.2

    Mac OS Sierra 10.12.6         Apple LLVM version 8.1.0 (clang/clang++-802.0.42)
    64-bit                        gfortran GNU Fortran (GCC) 7.1.0
    (swallow/kite)                Intel icc/icpc/ifort version 17.0.2


Tested Configuration Features Summary
=====================================

    In the tables below
          y   = tested
          n   = not tested in this release
          C   = Cluster
          W   = Workstation
          x   = not working in this release
          dna = does not apply
          ( ) = footnote appears below second table
          <blank> = testing incomplete on this feature or platform

Platform                              C         F90/   F90      C++  zlib  SZIP
                                      parallel  F2003  parallel
Solaris2.11 32-bit                      n        y/y    n        y    y     y
Solaris2.11 64-bit                      n        y/n    n        y    y     y
Windows 7                               y        y/y    n        y    y     y
Windows 7 x64                           y        y/y    y        y    y     y
Windows 7 Cygwin                        n        y/n    n        y    y     y
Windows 7 x64 Cygwin                    n        y/n    n        y    y     y
Windows 10                              y        y/y    n        y    y     y
Windows 10 x64                          y        y/y    n        y    y     y
Mac OS X Mavericks 10.9.5 64-bit        n        y/y    n        y    y     y
Mac OS X Yosemite 10.10.5 64-bit        n        y/y    n        y    y     y
Mac OS X El Capitan 10.11.6 64-bit      n        y/y    n        y    y     y
Mac OS Sierra 10.12.6 64-bit            n        y/y    n        y    y     y
CentOS 7.2 Linux 2.6.32 x86_64 PGI      n        y/y    n        y    y     y
CentOS 7.2 Linux 2.6.32 x86_64 GNU      y        y/y    y        y    y     y
CentOS 7.2 Linux 2.6.32 x86_64 Intel    n        y/y    n        y    y     y
Linux 2.6.32-573.18.1.el6.ppc64         n        y/y    n        y    y     y


Platform                                 Shared  Shared    Shared    Thread-
                                         C libs  F90 libs  C++ libs  safe
Solaris2.11 32-bit                         y       y         y         y
Solaris2.11 64-bit                         y       y         y         y
Windows 7                                  y       y         y         y
Windows 7 x64                              y       y         y         y
Windows 7 Cygwin                           n       n         n         y
Windows 7 x64 Cygwin                       n       n         n         y
Windows 10                                 y       y         y         y
Windows 10 x64                             y       y         y         y
Mac OS X Mavericks 10.9.5 64-bit           y       n         y         y
Mac OS X Yosemite 10.10.5 64-bit           y       n         y         y
Mac OS X El Capitan 10.11.6 64-bit         y       n         y         y
Mac OS Sierra 10.12.6 64-bit               y       n         y         y
CentOS 7.2 Linux 2.6.32 x86_64 PGI         y       y         y         n
CentOS 7.2 Linux 2.6.32 x86_64 GNU         y       y         y         y
CentOS 7.2 Linux 2.6.32 x86_64 Intel       y       y         y         n
Linux 2.6.32-573.18.1.el6.ppc64            y       y         y         n

Compiler versions for each platform are listed in the preceding
"Supported Platforms" table.


More Tested Platforms
=====================
The following platforms are not supported but have been tested for this release.

    Linux 2.6.32-573.22.1.el6    GNU C (gcc), Fortran (gfortran), C++ (g++)
    #1 SMP x86_64 GNU/Linux       compilers:
    (mayll/platypus)                 Version 4.4.7 20120313
                                     Version 4.9.3, 5.3.0, 6.2.0
                                  PGI C, Fortran, C++ for 64-bit target on
                                  x86-64;
                                     Version 17.10-0
                                  Intel(R) C (icc), C++ (icpc), Fortran (icc)
                                  compilers:
                                     Version 17.0.4.196 Build 20170411
                                  MPICH 3.1.4 compiled with GCC 4.9.3

    Linux 3.10.0-327.18.2.el7     GNU C (gcc) and C++ (g++) compilers
    #1 SMP x86_64 GNU/Linux          Version 4.8.5 20150623 (Red Hat 4.8.5-4)
    (jelly)                       with NAG Fortran Compiler Release 6.1(Tozai)
                                  GCC Version 7.1.0
                                  OpenMPI 3.0.0-GCC-7.2.0-2.29,
                                     3.1.0-GCC-7.2.0-2.29
                                  Intel(R) C (icc) and C++ (icpc) compilers
                                     Version 17.0.0.098 Build 20160721
                                  with NAG Fortran Compiler Release 6.1(Tozai)

    Linux 3.10.0-327.10.1.el7     MPICH 3.2 compiled with GCC 5.3.0
    #1 SMP x86_64 GNU/Linux
    (moohan)

    Linux 2.6.32-573.18.1.el6.ppc64  MPICH mpich 3.1.4 compiled with
    #1 SMP ppc64 GNU/Linux           IBM XL C/C++ for Linux, V13.1
    (ostrich)                        and IBM XL Fortran for Linux, V15.1

    Debian 8.4 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1 x86_64 GNU/Linux
                                  gcc, g++ (Debian 4.9.2-10) 4.9.2
                                  GNU Fortran (Debian 4.9.2-10) 4.9.2
                                  (cmake and autotools)

    Fedora 24  4.7.2-201.fc24.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux
                                  gcc, g++ (GCC) 6.1.1 20160621
                                      (Red Hat 6.1.1-3)
                                  GNU Fortran (GCC) 6.1.1 20160621
                                      (Red Hat 6.1.1-3)
                                  (cmake and autotools)

    Ubuntu 16.04.1 4.4.0-38-generic #57-Ubuntu SMP x86_64 GNU/Linux
                                  gcc, g++ (Ubuntu 5.4.0-6ubuntu1~16.04.2)
                                      5.4.0 20160609
                                  GNU Fortran (Ubuntu 5.4.0-6ubuntu1~16.04.2)
                                      5.4.0 20160609
                                  (cmake and autotools)


Known Problems
==============

    At present, metadata cache images may not be generated by parallel
    applications.  Parallel applications can read files with metadata cache
    images, but since this is a collective operation, a deadlock is possible
    if one or more processes do not participate.

    Three tests fail with OpenMPI 3.0.0/GCC-7.2.0-2.29:
        testphdf5 (ecdsetw, selnone, cchunk1, cchunk3, cchunk4, and actualio)
        t_shapesame (sscontig2)
        t_pflush1/fails on exit
    The first two tests fail attempting collective writes.

    CPP ptable test fails on VS2017 with Intel compiler, JIRA issue: HDFFV-10628.
    This test will pass with VS2015 with Intel compiler.

    Older MPI libraries such as OpenMPI 2.0.1 and MPICH 2.1.5 were tested
    while attempting to resolve the Jira issue: HDFFV-10540.
    The known problems of reading or writing > 2GBs when using MPI-2 was
    partially resolved with the MPICH library. The proposed support recognizes
    IO operations > 2GB and if the datatype is not a derived type, the library
    breaks the IO into chunks which can be input or output with the existing
    MPI 2 limitations, i.e. size reporting and function API size/count
    arguments are restricted to be 32 bit integers.  For derived types larger
    than 2GB, MPICH 2.1.5 fails while attempting to read or write data.
    OpenMPI in contrast, implements MPI-3 APIs even in the older releases
    and thus does not suffer from the 32 bit size limitation described here.
    OpenMPI releases prior to v3.1.3 appear to have other datatype issues however,
    e.g. within a single parallel test (testphdf5) the subtests (cdsetr, eidsetr)
    report data verfication errors before eventually aborting.
    The most recent versions of OpenMPI (v3.1.3 or newer) have evidently
    resolved these isses and parallel HDF5 testing does not currently report
    errors though occasional hangs have been observed.

    Known problems in previous releases can be found in the HISTORY*.txt files
    in the HDF5 source. Please report any new problems found to
    help@hdfgroup.org.


CMake vs. Autotools installations
=================================
While both build systems produce similar results, there are differences.
Each system produces the same set of folders on linux (only CMake works
on standard Windows); bin, include, lib and share. Autotools places the
COPYING and RELEASE.txt file in the root folder, CMake places them in
the share folder.

The bin folder contains the tools and the build scripts. Additionally, CMake
creates dynamic versions of the tools with the suffix "-shared". Autotools
installs one set of tools depending on the "--enable-shared" configuration
option.
  build scripts
  -------------
  Autotools: h5c++, h5cc, h5fc
  CMake: h5c++, h5cc, h5hlc++, h5hlcc

The include folder holds the header files and the fortran mod files. CMake
places the fortran mod files into separate shared and static subfolders,
while Autotools places one set of mod files into the include folder. Because
CMake produces a tools library, the header files for tools will appear in
the include folder.

The lib folder contains the library files, and CMake adds the pkgconfig
subfolder with the hdf5*.pc files used by the bin/build scripts created by
the CMake build. CMake separates the C interface code from the fortran code by
creating C-stub libraries for each Fortran library. In addition, only CMake
installs the tools library. The names of the szip libraries are different
between the build systems.

The share folder will have the most differences because CMake builds include
a number of CMake specific files for support of CMake's find_package and support
for the HDF5 Examples CMake project.