path: root/src/H5Cprivate.h

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 * Copyright by the Board of Trustees of the University of Illinois.         *
 * All rights reserved.                                                      *
 *                                                                           *
 * This file is part of HDF5.  The full HDF5 copyright notice, including     *
 * terms governing use, modification, and redistribution, is contained in    *
 * the files COPYING and Copyright.html.  COPYING can be found at the root   *
 * of the source code distribution tree; Copyright.html can be found at the  *
 * root level of an installed copy of the electronic HDF5 document set and   *
 * is linked from the top-level documents page.  It can also be found at     *
 * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html.  If you do not have     *
 * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. *
 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

/*-------------------------------------------------------------------------
 *
 * Created:		H5Cprivate.h
 *			6/3/04
 *			John Mainzer
 *
 * Purpose:		Constants and typedefs available to the rest of the
 *			library.
 *
 * Modifications:
 *
 *-------------------------------------------------------------------------
 */

#ifndef _H5Cprivate_H
#define _H5Cprivate_H

#include "H5Cpublic.h"		/*public prototypes			     */

/* Pivate headers needed by this header */
#include "H5private.h"		/* Generic Functions			*/
#include "H5Fprivate.h"		/* File access				*/

#define H5C_DO_SANITY_CHECKS		0

/* This sanity checking constant was picked out of the air.  Increase
 * or decrease it if appropriate.  Its purposes is to detect corrupt
 * object sizes, so it probably doesn't matter if it is a bit big.
 *
 *					JRM - 5/17/04
 */
#define H5C_MAX_ENTRY_SIZE		((size_t)(100 * 1024))

/* H5C_COLLECT_CACHE_STATS controls overall collection of statistics
 * on cache activity.  In general, this #define should be set to 0.
 */
#define H5C_COLLECT_CACHE_STATS	0

/* H5C_COLLECT_CACHE_ENTRY_STATS controls collection of statistics
 * in individual cache entries.  
 * 
 * H5C_COLLECT_CACHE_ENTRY_STATS should only be defined to true if 
 * H5C_COLLECT_CACHE_STATS is also defined to true.  
 */
#if H5C_COLLECT_CACHE_STATS

#define H5C_COLLECT_CACHE_ENTRY_STATS	1

#else

#define H5C_COLLECT_CACHE_ENTRY_STATS	0

#endif /* H5C_COLLECT_CACHE_STATS */

/*
 * Class methods pertaining to caching.	 Each type of cached object will
 * have a constant variable with permanent life-span that describes how
 * to cache the object.	 That variable will be of type H5C_class_t and
 * have the following required fields...
 *
 * LOAD:	Loads an object from disk to memory.  The function
 *		should allocate some data structure and return it.
 *
 * FLUSH:	Writes some data structure back to disk.  It would be
 *		wise for the data structure to include dirty flags to
 *		indicate whether it really needs to be written.	 This
 *		function is also responsible for freeing memory allocated
 *		by the LOAD method if the DEST argument is non-zero (by
 *              calling the DEST method).
 *
 * DEST:	Just frees memory allocated by the LOAD method.
 *
 * CLEAR:	Just marks object as non-dirty.
 *
 * SIZE:	Report the size (on disk) of the specified cache object.
 *		Note that the space allocated on disk may not be contiguous.
 */

typedef void *(*H5C_load_func_t)(H5F_t *f, 
                                 hid_t dxpl_id, 
                                 haddr_t addr, 
                                 const void *udata1, 
                                 void *udata2);
typedef herr_t (*H5C_flush_func_t)(H5F_t *f, 
                                   hid_t dxpl_id, 
                                   hbool_t dest, 
                                   haddr_t addr, 
                                   void *thing);
typedef herr_t (*H5C_dest_func_t)(H5F_t *f, 
                                  void *thing);
typedef herr_t (*H5C_clear_func_t)(H5F_t *f, 
                                   void *thing, 
                                   hbool_t dest);
typedef herr_t (*H5C_size_func_t)(H5F_t *f, 
                                  void *thing, 
                                  size_t *size_ptr);

typedef struct H5C_class_t {
    int			id;
    H5C_load_func_t	load;
    H5C_flush_func_t	flush;
    H5C_dest_func_t	dest;
    H5C_clear_func_t	clear;
    H5C_size_func_t	size;
} H5C_class_t;


/* Type defintions of call back functions used by the cache as a whole */

typedef herr_t (*H5C_write_permitted_func_t)(H5F_t *f,
                                             hid_t dxpl_id,
                                             hbool_t * write_permitted_ptr);


/* Default max cache size and min clean size are give here to make
 * them generally accessable.
 */

#define H5C__DEFAULT_MAX_CACHE_SIZE     ((size_t)(2 * 1024 * 1024))
#define H5C__DEFAULT_MIN_CLEAN_SIZE     ((size_t)(1 * 1024 * 1024))


/****************************************************************************
 *
 * structure H5C_cache_entry_t
 *
 * Instances of the H5C_cache_entry_t structure are used to store meta data 
 * cache entries in an a threaded binary B-tree.  See H5TB.c for the 
 * particulars of the B-tree.
 *
 * In typical application, this structure is the first field in a 
 * structure to be cached.  For historical reasons, the external module
 * is responsible for managing the dirty field.  All other fields are
 * managed by the cache.
 *
 * Note that our current implementation of a threaded binary B-tree will 
 * occasionaly change the node a particular datum is associated with.  Thus
 * this structure does not have a back pointer to its B-tree node.  If we
 * ever modify the threaded binary B-tree code to fix this, a back pointer 
 * would save us a few tree traversals.
 *
 * The fields of this structure are discussed individually below:
 *
 *						JRM - 4/26/04
 *
 * addr:	Base address of the cache entry on disk.
 *
 * size:	Length of the cache entry on disk.  Note that unlike normal
 *		caches, the entries in this cache are of variable length.
 *		The entries should never overlap, and when we do writebacks,
 *		we will want to writeback adjacent entries where possible.
 *
 * type:	Pointer to the instance of H5C_class_t containing pointers
 *		to the methods for cache entries of the current type.  This
 *		field should be NULL when the instance of H5C_cache_entry_t
 *		is not in use.
 *
 *		The name is not particularly descriptive, but is retained
 *		to avoid changes in existing code.
 *
 * dirty:	Boolean flag indicating whether the contents of the cache
 *		entry has been modified since the last time it was written
 *		to disk.
 *
 *		NOTE: For historical reasons, this field is not maintained
 *		      by the cache.  Instead, the module using the cache
 *		      sets this flag when it modifies the entry, and the 
 *		      flush and clear functions supplied by that module
 *		      reset the dirty when appropriate.
 *
 *		      This is a bit quirky, so we may want to change this
 *		      someday.  However it will require a change in the 
 *		      cache interface.
 *
 * protected:	Boolean flag indicating whether this entry is protected
 *		(or locked, to use more conventional terms).  When it is
 *		protected, the entry cannot be flushed or accessed until
 *		it is unprotected (or unlocked -- again to use more
 *		conventional terms).
 *
 *		Note that protected entries are removed from the LRU lists
 *		and inserted on the protected list.
 *
 *
 * Fields supporting replacement policies:
 *
 * The cache must have a replacement policy, and it will usually be 
 * necessary for this structure to contain fields supporting that policy.
 *
 * While there has been interest in several replacement policies for 
 * this cache, the initial development schedule is tight.  Thus I have
 * elected to support only a modified LRU policy for the first cut.
 *
 * When additional replacement policies are added, the fields in this
 * section will be used in different ways or not at all.  Thus the 
 * documentation of these fields is repeated for each replacement policy.
 * 
 * Modified LRU:
 * 
 * When operating in parallel mode, we must ensure that a read does not
 * cause a write.  If it does, the process will hang, as the write will
 * be collective and the other processes will not know to participate.
 *
 * To deal with this issue, I have modified the usual LRU policy by adding
 * clean and dirty LRU lists to the usual LRU list.  When reading in 
 * parallel mode, we evict from the clean LRU list only.  This implies
 * that we must try to ensure that the clean LRU list is reasonably well 
 * stocked.  See the comments on H5C_t in H5C.c for more details.
 * 
 * Note that even if we start with a completely clean cache, a sequence
 * of protects without unprotects can empty the clean LRU list.  In this
 * case, the cache must grow temporarily.  At the next write, we will 
 * attempt to evict enough entries to get the cache down to its nominal
 * maximum size.
 *
 * The use of the replacement policy fields under the Modified LRU policy
 * is discussed below:
 *
 * next:	Next pointer in either the LRU or the protected list, 
 *		depending on the current value of protected.  If there 
 *		is no next entry on the list, this field should be set 
 *		to NULL.
 *
 * prev:	Prev pointer in either the LRU or the protected list, 
 *		depending on the current value of protected.  If there 
 *		is no previous entry on the list, this field should be 
 *		set to NULL.
 *
 * aux_next:	Next pointer on either the clean or dirty LRU lists.
 *		This entry should be NULL when protected is true.  When
 *		protected is false, and dirty is true, it should point
 *		to the next item on the dirty LRU list.  When protected 
 *		is false, and dirty is false, it should point to the
 *		next item on the clean LRU list.  In either case, when
 *		there is no next item, it should be NULL.
 *
 * aux_prev:	Previous pointer on either the clean or dirty LRU lists.
 *		This entry should be NULL when protected is true.  When
 *		protected is false, and dirty is true, it should point
 *		to the previous item on the dirty LRU list.  When protected 
 *		is false, and dirty is false, it should point to the
 *		previous item on the clean LRU list.  In either case, when
 *		there is no previous item, it should be NULL.
 *
 *
 * Cache entry stats collection fields:
 *
 * These fields should only be compiled in when both H5C_COLLECT_CACHE_STATS
 * and H5C_COLLECT_CACHE_ENTRY_STATS are true.  When present, they allow
 * collection of statistics on individual cache entries.  
 *
 * accesses:	int32_t containing the number of times this cache entry has
 *		been referenced in its lifetime.
 *
 * clears:	int32_t containing the number of times this cache entry has
 *              been cleared in its life time.
 *
 * flushes:	int32_t containing the number of times this cache entry has
 *              been flushed to file in its life time. 
 *		
 ****************************************************************************/

typedef struct H5C_cache_entry_t
{
    haddr_t		addr;
    size_t		size;
    const H5C_class_t *	type;
    hbool_t		dirty;
    hbool_t		protected;

    /* fields supporting replacement policies: */

    struct H5C_cache_entry_t *	next;
    struct H5C_cache_entry_t *	prev;
    struct H5C_cache_entry_t *	aux_next;
    struct H5C_cache_entry_t *	aux_prev;

#if H5C_COLLECT_CACHE_ENTRY_STATS

    /* cache entry stats fields */

    int32_t			accesses;
    int32_t			clears;
    int32_t			flushes;

#endif /* H5C_COLLECT_CACHE_ENTRY_STATS */

} H5C_cache_entry_t; 


/* Typedef for the main structure for the cache (defined in H5C.c) */

typedef struct H5C_t H5C_t;

/*
 * Library prototypes.
 */
H5_DLL H5C_t * H5C_create(size_t                     max_cache_size,
                          size_t                     min_clean_size,
                          int                        max_type_id,
                          const char *               (* type_name_table_ptr)[],
                          H5C_write_permitted_func_t check_write_permitted);

H5_DLL herr_t H5C_dest(H5F_t * f,
                       hid_t   primary_dxpl_id,
                       hid_t   secondary_dxpl_id,
                       H5C_t * cache_ptr);

H5_DLL herr_t H5C_dest_empty(H5C_t * cache_ptr);

H5_DLL herr_t H5C_flush_cache(H5F_t *  f,
                              hid_t    primary_dxpl_id,
                              hid_t    secondary_dxpl_id,
                              H5C_t *  cache_ptr,
                              unsigned flags);

H5_DLL herr_t H5C_insert_entry(H5F_t *             f,
                               hid_t               primary_dxpl_id,
                               hid_t               secondary_dxpl_id,
                               H5C_t *             cache_ptr,
                               const H5C_class_t * type,
                               haddr_t             addr,
                               void *              thing);

H5_DLL herr_t H5C_rename_entry(H5F_t *            f,
                               H5C_t *             cache_ptr,
                               const H5C_class_t * type,
                               haddr_t             old_addr,
                               haddr_t             new_addr);

H5_DLL void * H5C_protect(H5F_t *             f,
                          hid_t               primary_dxpl_id,
                          hid_t               secondary_dxpl_id,
                          H5C_t *             cache_ptr,
                          const H5C_class_t * type,
                          haddr_t             addr,
                          const void *        udata1,
                          void *              udata2);

H5_DLL herr_t H5C_unprotect(H5F_t *             f,
                            hid_t               primary_dxpl_id,
                            hid_t               secondary_dxpl_id,
                            H5C_t *             cache_ptr,
                            const H5C_class_t * type,
                            haddr_t             addr,
                            void *              thing,
                            hbool_t             deleted);

H5_DLL herr_t H5C_stats(H5C_t * cache_ptr,
                        const char * cache_name,
                        hbool_t display_detailed_stats);

void H5C_stats__reset(H5C_t * cache_ptr);

H5_DLL herr_t H5C_set_skip_flags(H5C_t * cache_ptr,
                                 hbool_t skip_file_checks,
                                 hbool_t skip_dxpl_id_checks);

#endif /* !_H5Cprivate_H */