path: root/src/H5Fint.c

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 * Copyright by The HDF Group.                                               *
 * Copyright by the Board of Trustees of the University of Illinois.         *
 * All rights reserved.                                                      *
 *                                                                           *
 * This file is part of HDF5.  The full HDF5 copyright notice, including     *
 * terms governing use, modification, and redistribution, is contained in    *
 * the COPYING file, which can be found at the root of the source code       *
 * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
 * If you do not have access to either file, you may request a copy from     *
 * help@hdfgroup.org.                                                        *
 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

/****************/
/* Module Setup */
/****************/

#include "H5Fmodule.h" /* This source code file is part of the H5F module */

/***********/
/* Headers */
/***********/
#include "H5private.h"   /* Generic Functions                        */
#include "H5Aprivate.h"  /* Attributes                               */
#include "H5ACprivate.h" /* Metadata cache                           */
#include "H5CXprivate.h" /* API Contexts                             */
#include "H5Dprivate.h"  /* Datasets                                 */
#include "H5Eprivate.h"  /* Error handling                           */
#include "H5Fpkg.h"      /* File access                              */
#include "H5FDprivate.h" /* File drivers                             */
#include "H5Gprivate.h"  /* Groups                                   */
#include "H5Iprivate.h"  /* IDs                                      */
#include "H5Lprivate.h"  /* Links                                    */
#include "H5MFprivate.h" /* File memory management                   */
#include "H5MMprivate.h" /* Memory management                        */
#include "H5Pprivate.h"  /* Property lists                           */
#include "H5SMprivate.h" /* Shared Object Header Messages            */
#include "H5Tprivate.h"  /* Datatypes                                */
#include "H5VLprivate.h" /* Virtual Object Layer                     */

#include "H5VLnative_private.h" /* Native VOL connector                     */

/****************/
/* Local Macros */
/****************/

/******************/
/* Local Typedefs */
/******************/

/* Struct only used by functions H5F__get_objects and H5F__get_objects_cb */
typedef struct H5F_olist_t {
    H5I_type_t obj_type;     /* Type of object to look for */
    hid_t *    obj_id_list;  /* Pointer to the list of open IDs to return */
    size_t *   obj_id_count; /* Number of open IDs */
    struct {
        hbool_t local; /* Set flag for "local" file searches */
        union {
            H5F_shared_t *shared; /* Pointer to shared file to look inside */
            const H5F_t * file;   /* Pointer to file to look inside */
        } ptr;
    } file_info;
    size_t list_index; /* Current index in open ID array */
    size_t max_nobjs;  /* Maximum # of IDs to put into array */
} H5F_olist_t;

/********************/
/* Package Typedefs */
/********************/

/********************/
/* Local Prototypes */
/********************/

static herr_t H5F__close_cb(H5VL_object_t *file_vol_obj);
static herr_t H5F__set_vol_conn(H5F_t *file);
static herr_t H5F__get_objects(const H5F_t *f, unsigned types, size_t max_index, hid_t *obj_id_list,
                               hbool_t app_ref, size_t *obj_id_count_ptr);
static int    H5F__get_objects_cb(void *obj_ptr, hid_t obj_id, void *key);
static herr_t H5F__build_name(const char *prefix, const char *file_name, char **full_name /*out*/);
static char * H5F__getenv_prefix_name(char **env_prefix /*in,out*/);
static H5F_t *H5F__new(H5F_shared_t *shared, unsigned flags, hid_t fcpl_id, hid_t fapl_id, H5FD_t *lf);
static herr_t H5F__check_if_using_file_locks(H5P_genplist_t *fapl, hbool_t *use_file_locking);
static herr_t H5F__build_actual_name(const H5F_t *f, const H5P_genplist_t *fapl, const char *name,
                                     char ** /*out*/ actual_name);
static herr_t H5F__flush_phase1(H5F_t *f);
static herr_t H5F__flush_phase2(H5F_t *f, hbool_t closing);

/*********************/
/* Package Variables */
/*********************/

/* Package initialization variable */
hbool_t H5_PKG_INIT_VAR = FALSE;

/* Based on the value of the HDF5_USE_FILE_LOCKING environment variable.
 * TRUE/FALSE have obvious meanings. FAIL means the environment variable was
 * not set, so the code should ignore it and use the fapl value instead.
 */
htri_t use_locks_env_g = FAIL;

/*****************************/
/* Library Private Variables */
/*****************************/

/*******************/
/* Local Variables */
/*******************/

/* Declare a free list to manage the H5F_t struct */
H5FL_DEFINE(H5F_t);

/* Declare a free list to manage the H5F_shared_t struct */
H5FL_DEFINE(H5F_shared_t);

/* File ID class */
static const H5I_class_t H5I_FILE_CLS[1] = {{
    H5I_FILE,                 /* ID class value */
    0,                        /* Class flags */
    0,                        /* # of reserved IDs for class */
    (H5I_free_t)H5F__close_cb /* Callback routine for closing objects of this class */
}};

/*-------------------------------------------------------------------------
 * Function: H5F_init
 *
 * Purpose:  Initialize the interface from some other layer.
 *
 * Return:   Success:    non-negative
 *
 *           Failure:    negative
 *-------------------------------------------------------------------------
 */
herr_t
H5F_init(void)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_NOAPI(FAIL)
    /* FUNC_ENTER() does all the work */

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F_init() */

/*--------------------------------------------------------------------------
NAME
   H5F__init_package -- Initialize interface-specific information
USAGE
    herr_t H5F__init_package()
RETURNS
    Non-negative on success/Negative on failure
DESCRIPTION
    Initializes any interface-specific data or routines.

--------------------------------------------------------------------------*/
herr_t
H5F__init_package(void)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_PACKAGE

    /*
     * Initialize the atom group for the file IDs.
     */
    if (H5I_register_type(H5I_FILE_CLS) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, FAIL, "unable to initialize interface")

    /* Check the file locking environment variable */
    if (H5F__parse_file_lock_env_var(&use_locks_env_g) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, FAIL, "unable to parse file locking environment variable")

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* H5F__init_package() */

/*-------------------------------------------------------------------------
 * Function:    H5F_term_package
 *
 * Purpose:     Terminate this interface: free all memory and reset global
 *              variables to their initial values.  Release all ID groups
 *              associated with this interface.
 *
 * Return:      Success:    Positive if anything was done that might
 *                          have affected other interfaces;
 *                          zero otherwise.
 *
 *              Failure:    Never fails
 *
 *-------------------------------------------------------------------------
 */
int
H5F_term_package(void)
{
    int n = 0;

    FUNC_ENTER_NOAPI_NOINIT_NOERR

    if (H5_PKG_INIT_VAR) {
        if (H5I_nmembers(H5I_FILE) > 0) {
            (void)H5I_clear_type(H5I_FILE, FALSE, FALSE);
            n++; /*H5I*/
        }        /* end if */
        else {
            /* Make certain we've cleaned up all the shared file objects */
            H5F_sfile_assert_num(0);

            /* Destroy the file object id group */
            n += (H5I_dec_type_ref(H5I_FILE) > 0);

            /* Mark closed */
            if (0 == n)
                H5_PKG_INIT_VAR = FALSE;
        } /* end else */
    }     /* end if */

    FUNC_LEAVE_NOAPI(n)
} /* end H5F_term_package() */

/*-------------------------------------------------------------------------
 * Function:    H5F__close_cb
 *
 * Purpose:     Closes a file or causes the close operation to be pended.
 *              This function is called from the API and gets called
 *              by H5Fclose->H5I_dec_ref->H5F__close_cb when H5I_dec_ref()
 *              decrements the file ID reference count to zero.  The file ID
 *              is removed from the H5I_FILE group by H5I_dec_ref() just
 *              before H5F__close_cb() is called. If there are open object
 *              headers then the close is pended by moving the file to the
 *              H5I_FILE_CLOSING ID group (the f->closing contains the ID
 *              assigned to file).
 *
 * Return:      SUCCEED/FAIL
 *
 *-------------------------------------------------------------------------
 */
static herr_t
H5F__close_cb(H5VL_object_t *file_vol_obj)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_STATIC

    /* Sanity check */
    HDassert(file_vol_obj);

    /* Close the file */
    if (H5VL_file_close(file_vol_obj, H5P_DATASET_XFER_DEFAULT, H5_REQUEST_NULL) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTCLOSEFILE, FAIL, "unable to close file")

    /* Free the VOL object */
    if (H5VL_free_object(file_vol_obj) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTDEC, FAIL, "unable to free VOL object")

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__close_cb() */

/*-------------------------------------------------------------------------
 * Function:    H5F__parse_file_lock_env_var
 *
 * Purpose:     Parses the HDF5_USE_FILE_LOCKING environment variable.
 *
 * NOTE:        This is done in a separate function so we can call it from
 *              the test code.
 *
 * Return:      SUCCEED/FAIL
 *
 *-------------------------------------------------------------------------
 */
herr_t
H5F__parse_file_lock_env_var(htri_t *use_locks)
{
    char *lock_env_var = NULL; /* Environment variable pointer */

    FUNC_ENTER_PACKAGE_NOERR

    /* Check the file locking environment variable */
    lock_env_var = HDgetenv("HDF5_USE_FILE_LOCKING");
    if (lock_env_var && (!HDstrcmp(lock_env_var, "FALSE") || !HDstrcmp(lock_env_var, "0")))
        *use_locks = FALSE; /* Override: Never use locks */
    else if (lock_env_var && (!HDstrcmp(lock_env_var, "TRUE") || !HDstrcmp(lock_env_var, "BEST_EFFORT") ||
                              !HDstrcmp(lock_env_var, "1")))
        *use_locks = TRUE; /* Override: Always use locks */
    else
        *use_locks = FAIL; /* Environment variable not set, or not set correctly */

    FUNC_LEAVE_NOAPI(SUCCEED)
} /* end H5F__parse_file_lock_env_var() */

/*-------------------------------------------------------------------------
 * Function:    H5F__set_vol_conn
 *
 * Purpose:     Set the VOL connector ID and info for a file.
 *
 * Return:      SUCCEED/FAIL
 *
 *-------------------------------------------------------------------------
 */
static herr_t
H5F__set_vol_conn(H5F_t *file)
{
    H5VL_connector_prop_t connector_prop;               /* Property for VOL connector ID & info */
    void *                new_connector_info = NULL;    /* Copy of connector info */
    herr_t                ret_value          = SUCCEED; /* Return value */

    FUNC_ENTER_STATIC

    /* Sanity check */
    HDassert(file);

    /* Retrieve a copy of the "top-level" connector property, before any pass-through
     *  connectors modified or unwrapped it.
     */
    if (H5CX_get_vol_connector_prop(&connector_prop) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, FAIL, "can't get VOL connector info from API context")

    /* Sanity check */
    HDassert(0 != connector_prop.connector_id);

    /* Retrieve the connector for the ID */
    if (NULL == (file->shared->vol_cls = (H5VL_class_t *)H5I_object(connector_prop.connector_id)))
        HGOTO_ERROR(H5E_FILE, H5E_BADTYPE, FAIL, "not a VOL connector ID")

    /* Allocate and copy connector info, if it exists */
    if (connector_prop.connector_info)
        if (H5VL_copy_connector_info(file->shared->vol_cls, &new_connector_info,
                                     connector_prop.connector_info) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTCOPY, FAIL, "connector info copy failed")

    /* Cache the connector ID & info for the container */
    file->shared->vol_id   = connector_prop.connector_id;
    file->shared->vol_info = new_connector_info;
    if (H5I_inc_ref(file->shared->vol_id, FALSE) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTINC, FAIL, "incrementing VOL connector ID failed")

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__set_vol_conn() */

/*-------------------------------------------------------------------------
 * Function:    H5F_get_access_plist
 *
 * Purpose:     Returns a copy of the file access property list of the
 *              specified file.
 *
 *              NOTE: Make sure that, if you are going to overwrite
 *              information in the copied property list that was
 *              previously opened and assigned to the property list, then
 *              you must close it before overwriting the values.
 *
 * Return:      Success:    Object ID for a copy of the file access
 *                          property list.
 *              Failure:    H5I_INVALID_HID
 *-------------------------------------------------------------------------
 */
hid_t
H5F_get_access_plist(H5F_t *f, hbool_t app_ref)
{
    H5P_genplist_t *      new_plist;                  /* New property list */
    H5P_genplist_t *      old_plist;                  /* Old property list */
    H5FD_driver_prop_t    driver_prop;                /* Property for driver ID & info */
    hbool_t               driver_prop_copied = FALSE; /* Whether the driver property has been set up */
    H5VL_connector_prop_t connector_prop;             /* Property for VOL connector ID & info */
    unsigned              efc_size  = 0;
    hid_t                 ret_value = H5I_INVALID_HID; /* Return value */

    FUNC_ENTER_NOAPI(H5I_INVALID_HID)

    /* Check args */
    HDassert(f);

    /* Make a copy of the default file access property list */
    if (NULL == (old_plist = (H5P_genplist_t *)H5I_object(H5P_LST_FILE_ACCESS_ID_g)))
        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, H5I_INVALID_HID, "not a property list")
    if ((ret_value = H5P_copy_plist(old_plist, app_ref)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, H5I_INVALID_HID, "can't copy file access property list")
    if (NULL == (new_plist = (H5P_genplist_t *)H5I_object(ret_value)))
        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, H5I_INVALID_HID, "not a property list")

    /* Copy properties of the file access property list */
    if (H5P_set(new_plist, H5F_ACS_META_CACHE_INIT_CONFIG_NAME, &(f->shared->mdc_initCacheCfg)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set initial metadata cache resize config.")
    if (H5P_set(new_plist, H5F_ACS_DATA_CACHE_NUM_SLOTS_NAME, &(f->shared->rdcc_nslots)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set data cache number of slots")
    if (H5P_set(new_plist, H5F_ACS_DATA_CACHE_BYTE_SIZE_NAME, &(f->shared->rdcc_nbytes)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set data cache byte size")
    if (H5P_set(new_plist, H5F_ACS_PREEMPT_READ_CHUNKS_NAME, &(f->shared->rdcc_w0)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set preempt read chunks")
    if (H5P_set(new_plist, H5F_ACS_ALIGN_THRHD_NAME, &(f->shared->threshold)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set alignment threshold")
    if (H5P_set(new_plist, H5F_ACS_ALIGN_NAME, &(f->shared->alignment)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set alignment")
    if (H5P_set(new_plist, H5F_ACS_GARBG_COLCT_REF_NAME, &(f->shared->gc_ref)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set garbage collect reference")
    if (H5P_set(new_plist, H5F_ACS_META_BLOCK_SIZE_NAME, &(f->shared->meta_aggr.alloc_size)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set metadata cache size")
    if (H5P_set(new_plist, H5F_ACS_SIEVE_BUF_SIZE_NAME, &(f->shared->sieve_buf_size)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't sieve buffer size")
    if (H5P_set(new_plist, H5F_ACS_SDATA_BLOCK_SIZE_NAME, &(f->shared->sdata_aggr.alloc_size)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set 'small data' cache size")
    if (H5P_set(new_plist, H5F_ACS_LIBVER_LOW_BOUND_NAME, &f->shared->low_bound) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID,
                    "can't set 'low' bound for library format versions")
    if (H5P_set(new_plist, H5F_ACS_LIBVER_HIGH_BOUND_NAME, &f->shared->high_bound) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID,
                    "can't set 'high' bound for library format versions")
    if (H5P_set(new_plist, H5F_ACS_METADATA_READ_ATTEMPTS_NAME, &(f->shared->read_attempts)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set 'read attempts ' flag")
    if (H5P_set(new_plist, H5F_ACS_OBJECT_FLUSH_CB_NAME, &(f->shared->object_flush)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set object flush callback")

    if (f->shared->efc)
        efc_size = H5F__efc_max_nfiles(f->shared->efc);
    if (H5P_set(new_plist, H5F_ACS_EFC_SIZE_NAME, &efc_size) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, H5I_INVALID_HID, "can't set elink file cache size")
    if (f->shared->page_buf != NULL) {
        if (H5P_set(new_plist, H5F_ACS_PAGE_BUFFER_SIZE_NAME, &(f->shared->page_buf->max_size)) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTGET, H5I_INVALID_HID, "can't set page buffer size")
        if (H5P_set(new_plist, H5F_ACS_PAGE_BUFFER_MIN_META_PERC_NAME,
                    &(f->shared->page_buf->min_meta_perc)) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTGET, H5I_INVALID_HID,
                        "can't set minimum metadata fraction of page buffer")
        if (H5P_set(new_plist, H5F_ACS_PAGE_BUFFER_MIN_RAW_PERC_NAME, &(f->shared->page_buf->min_raw_perc)) <
            0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTGET, H5I_INVALID_HID,
                        "can't set minimum raw data fraction of page buffer")
    } /* end if */
#ifdef H5_HAVE_PARALLEL
    if (H5P_set(new_plist, H5_COLL_MD_READ_FLAG_NAME, &(f->shared->coll_md_read)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, H5I_INVALID_HID, "can't set collective metadata read flag")
    if (H5P_set(new_plist, H5F_ACS_COLL_MD_WRITE_FLAG_NAME, &(f->shared->coll_md_write)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, H5I_INVALID_HID, "can't set collective metadata read flag")
#endif /* H5_HAVE_PARALLEL */
    if (H5P_set(new_plist, H5F_ACS_META_CACHE_INIT_IMAGE_CONFIG_NAME, &(f->shared->mdc_initCacheImageCfg)) <
        0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set initial metadata cache resize config.")

    /* Prepare the driver property */
    driver_prop.driver_id   = f->shared->lf->driver_id;
    driver_prop.driver_info = H5FD_fapl_get(f->shared->lf);
    driver_prop_copied      = TRUE;

    /* Set the driver property */
    if (H5P_set(new_plist, H5F_ACS_FILE_DRV_NAME, &driver_prop) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set file driver ID & info")

    /* Set the VOL connector property */
    connector_prop.connector_id   = f->shared->vol_id;
    connector_prop.connector_info = f->shared->vol_info;
    if (H5P_set(new_plist, H5F_ACS_VOL_CONN_NAME, &connector_prop) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set VOL connector ID & info")

    /* Set the file close degree appropriately */
    if (f->shared->fc_degree == H5F_CLOSE_DEFAULT &&
        H5P_set(new_plist, H5F_ACS_CLOSE_DEGREE_NAME, &(f->shared->lf->cls->fc_degree)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set file close degree")
    else if (f->shared->fc_degree != H5F_CLOSE_DEFAULT &&
             H5P_set(new_plist, H5F_ACS_CLOSE_DEGREE_NAME, &(f->shared->fc_degree)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set file close degree")

done:
    /* Release the copy of the driver info, if it was set up */
    if (driver_prop_copied && H5FD_free_driver_info(driver_prop.driver_id, driver_prop.driver_info) < 0)
        HDONE_ERROR(H5E_FILE, H5E_CANTCLOSEOBJ, H5I_INVALID_HID, "can't close copy of driver info")

    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F_get_access_plist() */

/*-------------------------------------------------------------------------
 * Function: H5F_get_obj_count
 *
 * Purpose:  Private function return the number of opened object IDs
 *           (files, datasets, groups, datatypes) in the same file.
 *
 * Return:      SUCCEED on success, FAIL on failure.
 *-------------------------------------------------------------------------
 */
herr_t
H5F_get_obj_count(const H5F_t *f, unsigned types, hbool_t app_ref, size_t *obj_id_count_ptr)
{
    herr_t ret_value = SUCCEED;

    FUNC_ENTER_NOAPI(FAIL)

    /* Sanity check */
    HDassert(obj_id_count_ptr);

    /* Perform the query */
    if ((ret_value = H5F__get_objects(f, types, 0, NULL, app_ref, obj_id_count_ptr)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_BADITER, FAIL, "H5F__get_objects failed")

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F_get_obj_count() */

/*-------------------------------------------------------------------------
 * Function:    H5F_get_obj_ids
 *
 * Purpose:     Private function to return a list of opened object IDs.
 *
 * Return:      Non-negative on success; can't fail.
 *-------------------------------------------------------------------------
 */
herr_t
H5F_get_obj_ids(const H5F_t *f, unsigned types, size_t max_objs, hid_t *oid_list, hbool_t app_ref,
                size_t *obj_id_count_ptr)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_NOAPI(FAIL)

    /* Sanity check */
    HDassert(obj_id_count_ptr);

    /* Perform the query */
    if ((ret_value = H5F__get_objects(f, types, max_objs, oid_list, app_ref, obj_id_count_ptr)) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_BADITER, FAIL, "H5F__get_objects failed")

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F_get_obj_ids() */

/*---------------------------------------------------------------------------
 * Function:    H5F__get_objects
 *
 * Purpose:     This function is called by H5F_get_obj_count or
 *              H5F_get_obj_ids to get number of object IDs and/or a
 *              list of opened object IDs (in return value).
 *
 * Return:      SUCCEED/FAIL
 *---------------------------------------------------------------------------
 */
static herr_t
H5F__get_objects(const H5F_t *f, unsigned types, size_t max_nobjs, hid_t *obj_id_list, hbool_t app_ref,
                 size_t *obj_id_count_ptr)
{
    size_t      obj_id_count = 0;    /* Number of open IDs */
    H5F_olist_t olist;               /* Structure to hold search results */
    herr_t      ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_STATIC

    /* Sanity check */
    HDassert(obj_id_count_ptr);

    /* Set up search information */
    olist.obj_id_list  = (max_nobjs == 0 ? NULL : obj_id_list);
    olist.obj_id_count = &obj_id_count;
    olist.list_index   = 0;
    olist.max_nobjs    = max_nobjs;

    /* Determine if we are searching for local or global objects */
    if (types & H5F_OBJ_LOCAL) {
        olist.file_info.local    = TRUE;
        olist.file_info.ptr.file = f;
    } /* end if */
    else {
        olist.file_info.local      = FALSE;
        olist.file_info.ptr.shared = f ? f->shared : NULL;
    } /* end else */

    /* Iterate through file IDs to count the number, and put their
     * IDs on the object list.  */
    if (types & H5F_OBJ_FILE) {
        olist.obj_type = H5I_FILE;
        if (H5I_iterate(H5I_FILE, H5F__get_objects_cb, &olist, app_ref) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_BADITER, FAIL, "iteration failed(1)")
    } /* end if */

    /* If the caller just wants to count the number of objects (OLIST.MAX_NOBJS is zero),
     * or the caller wants to get the list of IDs and the list isn't full,
     * search through dataset IDs to count number of datasets, and put their
     * IDs on the object list */
    if (!olist.max_nobjs || (olist.max_nobjs && olist.list_index < olist.max_nobjs)) {
        if (types & H5F_OBJ_DATASET) {
            olist.obj_type = H5I_DATASET;
            if (H5I_iterate(H5I_DATASET, H5F__get_objects_cb, &olist, app_ref) < 0)
                HGOTO_ERROR(H5E_FILE, H5E_BADITER, FAIL, "iteration failed(2)")
        } /* end if */
    }

    /* If the caller just wants to count the number of objects (OLIST.MAX_NOBJS is zero),
     * or the caller wants to get the list of IDs and the list isn't full,
     * search through group IDs to count number of groups, and put their
     * IDs on the object list */
    if (!olist.max_nobjs || (olist.max_nobjs && olist.list_index < olist.max_nobjs)) {
        if (types & H5F_OBJ_GROUP) {
            olist.obj_type = H5I_GROUP;
            if (H5I_iterate(H5I_GROUP, H5F__get_objects_cb, &olist, app_ref) < 0)
                HGOTO_ERROR(H5E_FILE, H5E_BADITER, FAIL, "iteration failed(3)")
        }
    }

    /* If the caller just wants to count the number of objects (OLIST.MAX_NOBJS is zero),
     * or the caller wants to get the list of IDs and the list isn't full,
     * search through datatype IDs to count number of named datatypes, and put their
     * IDs on the object list */
    if (!olist.max_nobjs || (olist.max_nobjs && olist.list_index < olist.max_nobjs)) {
        if (types & H5F_OBJ_DATATYPE) {
            olist.obj_type = H5I_DATATYPE;
            if (H5I_iterate(H5I_DATATYPE, H5F__get_objects_cb, &olist, app_ref) < 0)
                HGOTO_ERROR(H5E_FILE, H5E_BADITER, FAIL, "iteration failed(4)")
        } /* end if */
    }

    /* If the caller just wants to count the number of objects (OLIST.MAX_NOBJS is zero),
     * or the caller wants to get the list of IDs and the list isn't full,
     * search through attribute IDs to count number of attributes, and put their
     * IDs on the object list */
    if (!olist.max_nobjs || (olist.max_nobjs && olist.list_index < olist.max_nobjs)) {
        if (types & H5F_OBJ_ATTR) {
            olist.obj_type = H5I_ATTR;
            if (H5I_iterate(H5I_ATTR, H5F__get_objects_cb, &olist, app_ref) < 0)
                HGOTO_ERROR(H5E_FILE, H5E_BADITER, FAIL, "iteration failed(5)")
        } /* end if */
    }

    /* Set the number of objects currently open */
    *obj_id_count_ptr = obj_id_count;

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__get_objects() */

/*-------------------------------------------------------------------------
 * Function:    H5F__get_objects_cb
 *
 * Purpose:     H5F__get_objects' callback function.  It verifies if an
 *              object is in the file, and either count it or put its ID
 *              on the list.
 *
 * Return:      H5_ITER_STOP if the array of object IDs is filled up.
 *              H5_ITER_CONT otherwise.
 *-------------------------------------------------------------------------
 */
static int
H5F__get_objects_cb(void *obj_ptr, hid_t obj_id, void *key)
{
    H5F_olist_t *olist     = (H5F_olist_t *)key; /* Alias for search info */
    hbool_t      add_obj   = FALSE;
    int          ret_value = H5_ITER_CONT; /* Return value */

    FUNC_ENTER_STATIC

    HDassert(obj_ptr);
    HDassert(olist);

    /* Count file IDs */
    if (olist->obj_type == H5I_FILE) {
        if ((olist->file_info.local &&
             (!olist->file_info.ptr.file ||
              (olist->file_info.ptr.file && (H5F_t *)obj_ptr == olist->file_info.ptr.file))) ||
            (!olist->file_info.local &&
             (!olist->file_info.ptr.shared ||
              (olist->file_info.ptr.shared && ((H5F_t *)obj_ptr)->shared == olist->file_info.ptr.shared)))) {
            add_obj = TRUE;
        }                /* end if */
    }                    /* end if */
    else {               /* Either count opened object IDs or put the IDs on the list */
        H5O_loc_t *oloc; /* Group entry info for object */

        switch (olist->obj_type) {
            case H5I_ATTR:
                oloc = H5A_oloc((H5A_t *)obj_ptr);
                break;

            case H5I_GROUP:
                oloc = H5G_oloc((H5G_t *)obj_ptr);
                break;

            case H5I_DATASET:
                oloc = H5D_oloc((H5D_t *)obj_ptr);
                break;

            case H5I_DATATYPE:
                if (H5T_is_named((H5T_t *)obj_ptr) == TRUE)
                    oloc = H5T_oloc((H5T_t *)obj_ptr);
                else
                    oloc = NULL;
                break;

            case H5I_MAP:
                HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, H5_ITER_ERROR,
                            "maps not supported in native VOL connector")

            case H5I_UNINIT:
            case H5I_BADID:
            case H5I_FILE:
            case H5I_DATASPACE:
            case H5I_VFL:
            case H5I_VOL:
            case H5I_GENPROP_CLS:
            case H5I_GENPROP_LST:
            case H5I_ERROR_CLASS:
            case H5I_ERROR_MSG:
            case H5I_ERROR_STACK:
            case H5I_SPACE_SEL_ITER:
            case H5I_NTYPES:
            default:
                HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, H5_ITER_ERROR, "unknown or invalid data object")
        } /* end switch */

        if ((olist->file_info.local && ((!olist->file_info.ptr.file && olist->obj_type == H5I_DATATYPE &&
                                         H5T_is_immutable((H5T_t *)obj_ptr) == FALSE) ||
                                        (!olist->file_info.ptr.file && olist->obj_type != H5I_DATATYPE) ||
                                        (oloc && oloc->file == olist->file_info.ptr.file))) ||
            (!olist->file_info.local &&
             ((!olist->file_info.ptr.shared && olist->obj_type == H5I_DATATYPE &&
               H5T_is_immutable((H5T_t *)obj_ptr) == FALSE) ||
              (!olist->file_info.ptr.shared && olist->obj_type != H5I_DATATYPE) ||
              (oloc && oloc->file && oloc->file->shared == olist->file_info.ptr.shared)))) {
            add_obj = TRUE;
        } /* end if */
    }     /* end else */

    if (add_obj) {
        /* Add the object's ID to the ID list, if appropriate */
        if (olist->obj_id_list) {
            olist->obj_id_list[olist->list_index] = obj_id;
            olist->list_index++;
        } /* end if */

        /* Increment the number of open objects */
        if (olist->obj_id_count)
            (*olist->obj_id_count)++;

        /* Check if we've filled up the array.  Return H5_ITER_STOP only if
         * we have filled up the array. Otherwise return H5_ITER_CONT(RET_VALUE is
         * preset to H5_ITER_CONT) because H5I_iterate needs the return value of
         * H5_ITER_CONT to continue the iteration.
         */
        if (olist->max_nobjs > 0 && olist->list_index >= olist->max_nobjs)
            HGOTO_DONE(H5_ITER_STOP) /* Indicate that the iterator should stop */
    }                                /* end if */

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__get_objects_cb() */

/*--------------------------------------------------------------------------
 * Function:    H5F__build_name
 *
 * Purpose:     Prepend PREFIX to FILE_NAME and store in FULL_NAME
 *
 * Return:      SUCCEED/FAIL
 *--------------------------------------------------------------------------*/
static herr_t
H5F__build_name(const char *prefix, const char *file_name, char **full_name /*out*/)
{
    size_t prefix_len;          /* length of prefix */
    size_t fname_len;           /* Length of external link file name */
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_STATIC

    prefix_len = HDstrlen(prefix);
    fname_len  = HDstrlen(file_name);

    /* Allocate a buffer to hold the filename + prefix + possibly the delimiter + terminating null byte */
    if (NULL == (*full_name = (char *)H5MM_malloc(prefix_len + fname_len + 2 +
                                                  2))) /* Extra "+2" to quiet GCC warning - 2019/07/05, QAK */
        HGOTO_ERROR(H5E_FILE, H5E_CANTALLOC, FAIL, "unable to allocate filename buffer")

    /* Compose the full file name */
    HDsnprintf(*full_name, (prefix_len + fname_len + 2 + 2), "%s%s%s",
               prefix, /* Extra "+2" to quiet GCC warning - 2019/07/05, QAK */
               ((prefix_len == 0 || H5_CHECK_DELIMITER(prefix[prefix_len - 1])) ? "" : H5_DIR_SEPS),
               file_name);

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* H5F__build_name() */

/*--------------------------------------------------------------------------
 * Function:    H5F__getenv_prefix_name
 *
 * Purpose:     Get the first pathname in the list of pathnames stored in env_prefix,
 *              which is separated by the environment delimiter.
 *              env_prefix is modified to point to the remaining pathnames
 *              in the list.
 *
 * Return:      A pointer to a pathname (can't fail but can return NULL)
--------------------------------------------------------------------------*/
static char *
H5F__getenv_prefix_name(char **env_prefix /*in,out*/)
{
    char *strret;           /* Pointer to next separator */
    char *ret_value = NULL; /* Return value */

    FUNC_ENTER_STATIC_NOERR

    /* Set return value now */
    ret_value = *env_prefix;

    /* Advance to next component, if possible */
    strret = HDstrchr(*env_prefix, H5_COLON_SEPC);
    if (strret == NULL)
        *env_prefix = NULL;
    else {
        /* Advance to next component */
        *env_prefix = strret + 1;

        /* Terminate current component (pointed to by ret_value) */
        *strret = '\0';
    } /* end else */

    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__getenv_prefix_name() */

/*-------------------------------------------------------------------------
 * Function:    H5F_prefix_open_file
 *
 * Purpose:     Attempts to open a dataset file.
 *
 * Return:      Pointer to an opened file on success / NULL on failure
 *-------------------------------------------------------------------------
 */
H5F_t *
H5F_prefix_open_file(H5F_t *primary_file, H5F_prefix_open_t prefix_type, const char *prop_prefix,
                     const char *file_name, unsigned file_intent, hid_t fapl_id)
{
    H5F_t *src_file         = NULL; /* Source file */
    char * full_name        = NULL; /* File name with prefix */
    char * actual_file_name = NULL; /* File's actual name */
    char * temp_file_name   = NULL; /* Temporary pointer to file name */
    size_t temp_file_name_len;      /* Length of temporary file name */
    H5F_t *ret_value = NULL;        /* Return value  */

    FUNC_ENTER_NOAPI_NOINIT

    /* Simplify intent flags for open calls */
    file_intent &= (H5F_ACC_RDWR | H5F_ACC_SWMR_WRITE | H5F_ACC_SWMR_READ);

    /* Copy the file name to use */
    if (NULL == (temp_file_name = H5MM_strdup(file_name)))
        HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "memory allocation failed")
    temp_file_name_len = HDstrlen(temp_file_name);

    /* Target file_name is an absolute pathname: see RM for detailed description */
    if (H5_CHECK_ABSOLUTE(file_name) || H5_CHECK_ABS_PATH(file_name)) {
        /* Try opening file */
        src_file = H5F__efc_open(primary_file, file_name, file_intent, H5P_FILE_CREATE_DEFAULT, fapl_id);

        /* Adjust temporary file name if file not opened */
        if (NULL == src_file) {
            char *ptr;

            /* Reset the error stack */
            H5E_clear_stack(NULL);

            /* Get last component of file_name */
            H5_GET_LAST_DELIMITER(file_name, ptr)
            HDassert(ptr);

            /* Increment past delimiter */
            ptr++;

            /* Copy into the temp. file name */
            HDstrncpy(temp_file_name, ptr, temp_file_name_len);
            temp_file_name[temp_file_name_len - 1] = '\0';
        } /* end if */
    }     /* end if */
    else if (H5_CHECK_ABS_DRIVE(file_name)) {
        /* Try opening file */
        src_file = H5F__efc_open(primary_file, file_name, file_intent, H5P_FILE_CREATE_DEFAULT, fapl_id);

        /* Adjust temporary file name if file not opened */
        if (NULL == src_file) {
            /* Reset the error stack */
            H5E_clear_stack(NULL);

            /* Strip "<drive-letter>:" */
            HDstrncpy(temp_file_name, &file_name[2], temp_file_name_len);
            temp_file_name[temp_file_name_len - 1] = '\0';
        } /* end if */
    }     /* end if */

    /* Try searching from paths set in the environment variable */
    if (src_file == NULL) {
        char *env_prefix;

        /* Get the appropriate environment variable */
        if (H5F_PREFIX_VDS == prefix_type)
            env_prefix = HDgetenv("HDF5_VDS_PREFIX");
        else if (H5F_PREFIX_ELINK == prefix_type)
            env_prefix = HDgetenv("HDF5_EXT_PREFIX");
        else
            HGOTO_ERROR(H5E_FILE, H5E_BADTYPE, NULL, "prefix type is not sensible")

        /* If environment variable is defined, iterate through prefixes it defines */
        if (NULL != env_prefix) {
            char *tmp_env_prefix, *saved_env;

            /* Make a copy of the environment variable string */
            if (NULL == (saved_env = tmp_env_prefix = H5MM_strdup(env_prefix)))
                HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL, "memory allocation failed")

            /* Loop over prefixes in environment variable */
            while ((tmp_env_prefix) && (*tmp_env_prefix)) {
                char *out_prefix_name;

                out_prefix_name = H5F__getenv_prefix_name(&tmp_env_prefix /*in,out*/);
                if (out_prefix_name && (*out_prefix_name)) {
                    if (H5F__build_name(out_prefix_name, temp_file_name, &full_name /*out*/) < 0) {
                        saved_env = (char *)H5MM_xfree(saved_env);
                        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, NULL, "can't prepend prefix to filename")
                    } /* end if */

                    /* Try opening file */
                    src_file =
                        H5F__efc_open(primary_file, full_name, file_intent, H5P_FILE_CREATE_DEFAULT, fapl_id);

                    /* Release copy of file name */
                    full_name = (char *)H5MM_xfree(full_name);

                    /* Check for file not opened */
                    if (NULL == src_file)
                        /* Reset the error stack */
                        H5E_clear_stack(NULL);
                    /* Leave if file was opened */
                    else
                        break;
                    H5E_clear_stack(NULL);
                } /* end if */
            }     /* end while */

            saved_env = (char *)H5MM_xfree(saved_env);
        } /* end if */
    }     /* end if */

    /* Try searching from property list */
    if (src_file == NULL && prop_prefix) {
        /* Construct name to open */
        if (H5F__build_name(prop_prefix, temp_file_name, &full_name /*out*/) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTGET, NULL, "can't prepend prefix to filename")

        /* Try opening file */
        src_file = H5F__efc_open(primary_file, full_name, file_intent, H5P_FILE_CREATE_DEFAULT, fapl_id);

        /* Release name */
        full_name = (char *)H5MM_xfree(full_name);

        /* Check for file not opened */
        if (NULL == src_file)
            /* Reset the error stack */
            H5E_clear_stack(NULL);
    } /* end if */

    /* Try searching from main file's "extpath": see description in H5F_open() & H5_build_extpath() */
    if (src_file == NULL) {
        char *dspath;

        if (NULL != (dspath = H5F_EXTPATH(primary_file))) {
            /* Construct name to open */
            if (H5F__build_name(dspath, temp_file_name, &full_name /*out*/) < 0)
                HGOTO_ERROR(H5E_FILE, H5E_CANTGET, NULL, "can't prepend prefix to filename")

            /* Try opening file */
            src_file = H5F__efc_open(primary_file, full_name, file_intent, H5P_FILE_CREATE_DEFAULT, fapl_id);

            /* Release name */
            full_name = (char *)H5MM_xfree(full_name);

            /* Check for file not opened */
            if (NULL == src_file)
                /* Reset the error stack */
                H5E_clear_stack(NULL);
        } /* end if */
    }     /* end if */

    /* Try the relative file_name stored in temp_file_name */
    if (src_file == NULL) {
        /* Try opening file */
        src_file = H5F__efc_open(primary_file, temp_file_name, file_intent, H5P_FILE_CREATE_DEFAULT, fapl_id);

        /* Check for file not opened */
        if (NULL == src_file)
            /* Reset the error stack */
            H5E_clear_stack(NULL);
    } /* end if */

    /* try the 'resolved' name for the virtual file */
    if (src_file == NULL) {
        char *ptr = NULL;

        /* Copy resolved file name */
        if (NULL == (actual_file_name = H5MM_strdup(H5F_ACTUAL_NAME(primary_file))))
            HGOTO_ERROR(H5E_FILE, H5E_CANTALLOC, NULL, "can't duplicate resolved file name string")

        /* get last component of file_name */
        H5_GET_LAST_DELIMITER(actual_file_name, ptr)
        if (ptr)
            /* Truncate filename portion from actual file name path */
            *ptr = '\0';

        /* Build new file name for the external file */
        if (H5F__build_name((ptr ? actual_file_name : ""), temp_file_name, &full_name /*out*/) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTGET, NULL, "can't prepend prefix to filename")
        actual_file_name = (char *)H5MM_xfree(actual_file_name);

        /* Try opening with the resolved name */
        src_file = H5F__efc_open(primary_file, full_name, file_intent, H5P_FILE_CREATE_DEFAULT, fapl_id);

        /* Release name */
        full_name = (char *)H5MM_xfree(full_name);

        /* Check for file not opened */
        if (NULL == src_file)
            /* Reset the error stack */
            H5E_clear_stack(NULL);
    } /* end if */

    /* Set return value (possibly NULL or valid H5F_t *) */
    ret_value = src_file;

done:
    if ((NULL == ret_value) && src_file)
        if (H5F_efc_close(primary_file, src_file) < 0)
            HDONE_ERROR(H5E_FILE, H5E_CANTCLOSEFILE, NULL, "can't close source file")
    if (full_name)
        full_name = (char *)H5MM_xfree(full_name);
    if (temp_file_name)
        temp_file_name = (char *)H5MM_xfree(temp_file_name);
    if (actual_file_name)
        actual_file_name = (char *)H5MM_xfree(actual_file_name);

    FUNC_LEAVE_NOAPI(ret_value)
} /* H5F_prefix_open_file() */

/*-------------------------------------------------------------------------
 * Function:    H5F__is_hdf5
 *
 * Purpose:     Check the file signature to detect an HDF5 file.
 *
 * Return:      TRUE/FALSE/FAIL
 *-------------------------------------------------------------------------
 */
htri_t
H5F__is_hdf5(const char *name, hid_t fapl_id)
{
    H5FD_t *file      = NULL;        /* Low-level file struct                    */
    haddr_t sig_addr  = HADDR_UNDEF; /* Addess of hdf5 file signature            */
    htri_t  ret_value = FAIL;        /* Return value                             */

    FUNC_ENTER_PACKAGE

    /* Open the file */
    /* NOTE:    This now uses the fapl_id that was passed in, so H5Fis_accessible()
     *          should work with arbitrary VFDs, unlike H5Fis_hdf5().
     */
    if (NULL == (file = H5FD_open(name, H5F_ACC_RDONLY, fapl_id, HADDR_UNDEF)))
        HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, FAIL, "unable to open file")

    /* The file is an hdf5 file if the hdf5 file signature can be found */
    if (H5FD_locate_signature(file, &sig_addr) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_NOTHDF5, FAIL, "error while trying to locate file signature")
    ret_value = (HADDR_UNDEF != sig_addr);

done:
    /* Close the file */
    if (file)
        if (H5FD_close(file) < 0 && TRUE == ret_value)
            HDONE_ERROR(H5E_FILE, H5E_CANTCLOSEFILE, FAIL, "unable to close file")

    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__is_hdf5() */

/*-------------------------------------------------------------------------
 * Function:    H5F__new
 *
 * Purpose:     Creates a new file object and initializes it. The
 *              H5Fopen and H5Fcreate functions then fill in various fields.
 *              If SHARED is a non-null pointer then the shared info
 *              to which it points has the reference count incremented.
 *              Otherwise a new, empty shared info struct is created and
 *              initialized with the specified file access property list.
 *
 * Return:      Success:    Pointer to a new file struct
 *
 *              Failure:    NULL
 *
 *-------------------------------------------------------------------------
 */
static H5F_t *
H5F__new(H5F_shared_t *shared, unsigned flags, hid_t fcpl_id, hid_t fapl_id, H5FD_t *lf)
{
    H5F_t *f         = NULL;
    H5F_t *ret_value = NULL;

    FUNC_ENTER_STATIC

    if (NULL == (f = H5FL_CALLOC(H5F_t)))
        HGOTO_ERROR(H5E_FILE, H5E_NOSPACE, NULL, "can't allocate top file structure")
    f->id_exists = FALSE;

    if (shared) {
        HDassert(lf == NULL);
        f->shared = shared;
    }
    else {
        H5P_genplist_t *plist;    /* Property list */
        unsigned        efc_size; /* External file cache size */
        size_t          u;        /* Local index variable */

        HDassert(lf != NULL);
        if (NULL == (f->shared = H5FL_CALLOC(H5F_shared_t)))
            HGOTO_ERROR(H5E_FILE, H5E_NOSPACE, NULL, "can't allocate shared file structure")

        f->shared->flags     = flags;
        f->shared->sohm_addr = HADDR_UNDEF;
        f->shared->sohm_vers = HDF5_SHAREDHEADER_VERSION;
        f->shared->accum.loc = HADDR_UNDEF;
        f->shared->lf        = lf;

        /* Initialization for handling file space */
        for (u = 0; u < NELMTS(f->shared->fs_addr); u++) {
            f->shared->fs_state[u] = H5F_FS_STATE_CLOSED;
            f->shared->fs_addr[u]  = HADDR_UNDEF;
            f->shared->fs_man[u]   = NULL;
        }
        /* This will be stored as eoa_pre_fsm_fsalloc in the fsinfo message */
        /* This is done to be backward compatible with 1.10 library that has the FSM hack */
        f->shared->eoa_fsm_fsalloc       = HADDR_UNDEF;
        f->shared->eoa_post_mdci_fsalloc = HADDR_UNDEF;

        /* Initialization for handling file space (for paged aggregation) */
        f->shared->pgend_meta_thres = H5F_FILE_SPACE_PGEND_META_THRES;

        /* intialize point of no return */
        f->shared->point_of_no_return = FALSE;

        /* Copy the file creation and file access property lists into the
         * new file handle. We do this early because some values might need
         * to change as the file is being opened.
         */
        if (NULL == (plist = (H5P_genplist_t *)H5I_object(fcpl_id)))
            HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not property list")
        f->shared->fcpl_id = H5P_copy_plist(plist, FALSE);

        /* Get the FCPL values to cache */
        if (H5P_get(plist, H5F_CRT_ADDR_BYTE_NUM_NAME, &f->shared->sizeof_addr) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get byte number for address")
        if (H5P_get(plist, H5F_CRT_OBJ_BYTE_NUM_NAME, &f->shared->sizeof_size) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get byte number for object size")
        if (H5P_get(plist, H5F_CRT_SHMSG_NINDEXES_NAME, &f->shared->sohm_nindexes) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get number of SOHM indexes")
        HDassert(f->shared->sohm_nindexes < 255);
        if (H5P_get(plist, H5F_CRT_FILE_SPACE_STRATEGY_NAME, &f->shared->fs_strategy) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get file space strategy")
        if (H5P_get(plist, H5F_CRT_FREE_SPACE_PERSIST_NAME, &f->shared->fs_persist) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get file space persisting status")
        if (H5P_get(plist, H5F_CRT_FREE_SPACE_THRESHOLD_NAME, &f->shared->fs_threshold) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get free-space section threshold")
        if (H5P_get(plist, H5F_CRT_FILE_SPACE_PAGE_SIZE_NAME, &f->shared->fs_page_size) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get file space page size")
        HDassert(f->shared->fs_page_size >= H5F_FILE_SPACE_PAGE_SIZE_MIN);

        /* Temporary for multi/split drivers: fail file creation
         * when persisting free-space or using paged aggregation strategy.
         */
        if (H5F_HAS_FEATURE(f, H5FD_FEAT_PAGED_AGGR))
            if (f->shared->fs_strategy == H5F_FSPACE_STRATEGY_PAGE || f->shared->fs_persist)
                HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't open with this strategy or persistent fs")

        /* Get the FAPL values to cache */
        if (NULL == (plist = (H5P_genplist_t *)H5I_object(fapl_id)))
            HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not file access property list")
        if (H5P_get(plist, H5F_ACS_META_CACHE_INIT_CONFIG_NAME, &(f->shared->mdc_initCacheCfg)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get initial metadata cache resize config")
        if (H5P_get(plist, H5F_ACS_DATA_CACHE_NUM_SLOTS_NAME, &(f->shared->rdcc_nslots)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get data cache number of slots")
        if (H5P_get(plist, H5F_ACS_DATA_CACHE_BYTE_SIZE_NAME, &(f->shared->rdcc_nbytes)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get data cache byte size")
        if (H5P_get(plist, H5F_ACS_PREEMPT_READ_CHUNKS_NAME, &(f->shared->rdcc_w0)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get preempt read chunk")
        if (H5P_get(plist, H5F_ACS_ALIGN_THRHD_NAME, &(f->shared->threshold)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get alignment threshold")
        if (H5P_get(plist, H5F_ACS_ALIGN_NAME, &(f->shared->alignment)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get alignment")
        if (H5P_get(plist, H5F_ACS_GARBG_COLCT_REF_NAME, &(f->shared->gc_ref)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get garbage collect reference")
        if (H5P_get(plist, H5F_ACS_SIEVE_BUF_SIZE_NAME, &(f->shared->sieve_buf_size)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get sieve buffer size")
        if (H5P_get(plist, H5F_ACS_LIBVER_LOW_BOUND_NAME, &(f->shared->low_bound)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get 'low' bound for library format versions")
        if (H5P_get(plist, H5F_ACS_LIBVER_HIGH_BOUND_NAME, &(f->shared->high_bound)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get 'high' bound for library format versions")
        if (H5P_get(plist, H5F_ACS_USE_MDC_LOGGING_NAME, &(f->shared->use_mdc_logging)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get 'use mdc logging' flag")
        if (H5P_get(plist, H5F_ACS_START_MDC_LOG_ON_ACCESS_NAME, &(f->shared->start_mdc_log_on_access)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get 'start mdc log on access' flag")
        if (H5P_get(plist, H5F_ACS_META_BLOCK_SIZE_NAME, &(f->shared->meta_aggr.alloc_size)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get metadata cache size")
        f->shared->meta_aggr.feature_flag = H5FD_FEAT_AGGREGATE_METADATA;
        if (H5P_get(plist, H5F_ACS_SDATA_BLOCK_SIZE_NAME, &(f->shared->sdata_aggr.alloc_size)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get 'small data' cache size")
        f->shared->sdata_aggr.feature_flag = H5FD_FEAT_AGGREGATE_SMALLDATA;
        if (H5P_get(plist, H5F_ACS_EFC_SIZE_NAME, &efc_size) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get elink file cache size")
        if (efc_size > 0)
            if (NULL == (f->shared->efc = H5F__efc_create(efc_size)))
                HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "can't create external file cache")
#ifdef H5_HAVE_PARALLEL
        if (H5P_get(plist, H5_COLL_MD_READ_FLAG_NAME, &(f->shared->coll_md_read)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get collective metadata read flag")
        if (H5P_get(plist, H5F_ACS_COLL_MD_WRITE_FLAG_NAME, &(f->shared->coll_md_write)) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get collective metadata write flag")
#endif /* H5_HAVE_PARALLEL */
        if (H5P_get(plist, H5F_ACS_META_CACHE_INIT_IMAGE_CONFIG_NAME, &(f->shared->mdc_initCacheImageCfg)) <
            0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get initial metadata cache resize config")

        /* Get the VFD values to cache */
        f->shared->maxaddr = H5FD_get_maxaddr(lf);
        if (!H5F_addr_defined(f->shared->maxaddr))
            HGOTO_ERROR(H5E_FILE, H5E_BADVALUE, NULL, "bad maximum address from VFD")
        if (H5FD_get_feature_flags(lf, &f->shared->feature_flags) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTGET, NULL, "can't get feature flags from VFD")

        /* Require the SWMR feature flag if SWMR I/O is desired */
        if (!H5F_HAS_FEATURE(f, H5FD_FEAT_SUPPORTS_SWMR_IO) &&
            (H5F_INTENT(f) & (H5F_ACC_SWMR_WRITE | H5F_ACC_SWMR_READ)))
            HGOTO_ERROR(H5E_FILE, H5E_BADVALUE, NULL, "must use a SWMR-compatible VFD when SWMR is specified")

        if (H5FD_get_fs_type_map(lf, f->shared->fs_type_map) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTGET, NULL, "can't get free space type mapping from VFD")
        if (H5MF_init_merge_flags(f->shared) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "problem initializing free space merge flags")
        f->shared->tmp_addr = f->shared->maxaddr;
        /* Disable temp. space allocation for parallel I/O (for now) */
        /* (When we've arranged to have the relocated metadata addresses (and
         *      sizes) broadcast during the "end of epoch" metadata operations,
         *      this can be enabled - QAK)
         */
        /* (This should be disabled when the metadata journaling branch is
         *      merged into the trunk and journaling is enabled, at least until
         *      we make it work. - QAK)
         */
        f->shared->use_tmp_space = !H5F_HAS_FEATURE(f, H5FD_FEAT_HAS_MPI);

        /* Retrieve the # of read attempts here so that sohm in superblock will get the correct # of attempts
         */
        if (H5P_get(plist, H5F_ACS_METADATA_READ_ATTEMPTS_NAME, &f->shared->read_attempts) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get the # of read attempts")

        /* When opening file with SWMR access, the # of read attempts is H5F_SWMR_METADATA_READ_ATTEMPTS if
         * not set */
        /* When opening file without SWMR access, the # of read attempts is always H5F_METADATA_READ_ATTEMPTS
         * (set or not set) */
        if (H5F_INTENT(f) & (H5F_ACC_SWMR_READ | H5F_ACC_SWMR_WRITE)) {
            /* If no value for read attempts has been set, use the default */
            if (!f->shared->read_attempts)
                f->shared->read_attempts = H5F_SWMR_METADATA_READ_ATTEMPTS;

            /* Turn off accumulator with SWMR */
            f->shared->feature_flags &= ~(unsigned)H5FD_FEAT_ACCUMULATE_METADATA;
            if (H5FD_set_feature_flags(f->shared->lf, f->shared->feature_flags) < 0)
                HGOTO_ERROR(H5E_FILE, H5E_CANTSET, NULL, "can't set feature_flags in VFD")
        }
        else {
            /* If no value for read attempts has been set, use the default */
            if (!f->shared->read_attempts)
                f->shared->read_attempts = H5F_METADATA_READ_ATTEMPTS;
        }

        /* Determine the # of bins for metdata read retries */
        if (H5F_set_retries(f) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "can't set retries and retries_nbins")

        /* Get the metadata cache log location (if we're logging) */
        {
            char *mdc_log_location = NULL; /* location of metadata cache log location */

            if (H5P_get(plist, H5F_ACS_MDC_LOG_LOCATION_NAME, &mdc_log_location) < 0)
                HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get mdc log location")
            if (mdc_log_location != NULL) {
                size_t len = HDstrlen(mdc_log_location);
                if (NULL == (f->shared->mdc_log_location = (char *)H5MM_calloc((len + 1) * sizeof(char))))
                    HGOTO_ERROR(H5E_RESOURCE, H5E_CANTALLOC, NULL,
                                "can't allocate memory for mdc log file name")
                HDstrncpy(f->shared->mdc_log_location, mdc_log_location, len);
            }
            else
                f->shared->mdc_log_location = NULL;
        } /* end block */

        /* Get object flush callback information */
        if (H5P_get(plist, H5F_ACS_OBJECT_FLUSH_CB_NAME, &(f->shared->object_flush)) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTGET, NULL, "can't get object flush cb info")

        /* Get the VOL connector info */
        if (H5F__set_vol_conn(f) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "can't cache VOL connector info")

        /* Create a metadata cache with the specified number of elements.
         * The cache might be created with a different number of elements and
         * the access property list should be updated to reflect that.
         */
        if (H5AC_create(f, &(f->shared->mdc_initCacheCfg), &(f->shared->mdc_initCacheImageCfg)) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "unable to create metadata cache")

        /* Create the file's "open object" information */
        if (H5FO_create(f) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "unable to create open object data structure")

        /* Add new "shared" struct to list of open files */
        if (H5F__sfile_add(f->shared) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "unable to append to list of open files")
    } /* end else */

    f->shared->nrefs++;

    /* Create the file's "top open object" information */
    if (H5FO_top_create(f) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "unable to create open object data structure")

    /* Set return value */
    ret_value = f;

done:
    if (!ret_value && f) {
        if (!shared) {
            /* Attempt to clean up some of the shared file structures */
            if (f->shared->efc)
                if (H5F__efc_destroy(f->shared->efc) < 0)
                    HDONE_ERROR(H5E_FILE, H5E_CANTRELEASE, NULL, "can't destroy external file cache")
            if (f->shared->fcpl_id > 0)
                if (H5I_dec_ref(f->shared->fcpl_id) < 0)
                    HDONE_ERROR(H5E_FILE, H5E_CANTDEC, NULL, "can't close property list")

            f->shared = H5FL_FREE(H5F_shared_t, f->shared);
        }

        /* Free VOL object */
        if (f->vol_obj)
            if (H5VL_free_object(f->vol_obj) < 0)
                HDONE_ERROR(H5E_FILE, H5E_CANTDEC, NULL, "unable to free VOL object")

        f = H5FL_FREE(H5F_t, f);
    }

    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__new() */

/*-------------------------------------------------------------------------
 * Function:    H5F__dest
 *
 * Purpose:     Destroys a file structure.  This function flushes the cache
 *              but doesn't do any other cleanup other than freeing memory
 *              for the file struct.  The shared info for the file is freed
 *              only when its reference count reaches zero.
 *
 * Return:      SUCCEED/FAIL
 *-------------------------------------------------------------------------
 */
herr_t
H5F__dest(H5F_t *f, hbool_t flush)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_PACKAGE

    /* Sanity check */
    HDassert(f);
    HDassert(f->shared);

    if (1 == f->shared->nrefs) {
        int actype; /* metadata cache type (enum value) */

        /* Mark this file as closing */
        f->shared->closing = TRUE;

        /* Flush at this point since the file will be closed (phase 1).
         * Only try to flush the file if it was opened with write access, and if
         * the caller requested a flush.
         */
        if ((H5F_ACC_RDWR & H5F_INTENT(f)) && flush)
            if (H5F__flush_phase1(f) < 0)
                /* Push error, but keep going*/
                HDONE_ERROR(H5E_FILE, H5E_CANTFLUSH, FAIL, "unable to flush cached data (phase 1)")

        /* Notify the metadata cache that the file is about to be closed.
         * This allows the cache to set up for creating a metadata cache
         * image if this has been requested.
         */
        if (H5AC_prep_for_file_close(f) < 0)
            /* Push error, but keep going */
            HDONE_ERROR(H5E_FILE, H5E_CANTFLUSH, FAIL, "metadata cache prep for close failed")

        /* Flush at this point since the file will be closed (phase 2).
         * Only try to flush the file if it was opened with write access, and if
         * the caller requested a flush.
         */
        if ((H5F_ACC_RDWR & H5F_INTENT(f)) && flush)
            if (H5F__flush_phase2(f, TRUE) < 0)
                /* Push error, but keep going */
                HDONE_ERROR(H5E_FILE, H5E_CANTFLUSH, FAIL, "unable to flush cached data (phase 2)")

        /* With the shutdown modifications, the contents of the metadata cache
         * should be clean at this point, with the possible exception of the
         * the superblock and superblock extension.
         *
         * Verify this.
         */
        HDassert(H5AC_cache_is_clean(f, H5AC_RING_MDFSM));

        /* Release the external file cache */
        if (f->shared->efc) {
            if (H5F__efc_destroy(f->shared->efc) < 0)
                /* Push error, but keep going*/
                HDONE_ERROR(H5E_FILE, H5E_CANTRELEASE, FAIL, "can't destroy external file cache")
            f->shared->efc = NULL;
        } /* end if */

        /* With the shutdown modifications, the contents of the metadata cache
         * should be clean at this point, with the possible exception of the
         * the superblock and superblock extension.
         *
         * Verify this.
         */
        HDassert(H5AC_cache_is_clean(f, H5AC_RING_MDFSM));

        /* Release objects that depend on the superblock being initialized */
        if (f->shared->sblock) {
            /* Shutdown file free space manager(s) */
            /* (We should release the free space information now (before
             *      truncating the file and before the metadata cache is shut
             *      down) since the free space manager is holding some data
             *      structures in memory and also because releasing free space
             *      can shrink the file's 'eoa' value)
             *
             * Update 11/1/16:
             *
             *      With recent library shutdown modifications, the free space
             *      managers should be settled and written to file at this point
             *      (assuming they are persistent).  In this case, closing the
             *      free space managers should have no effect on EOA.
             *
             *                                          -- JRM
             */
            if (H5F_ACC_RDWR & H5F_INTENT(f)) {
                if (H5MF_close(f) < 0)
                    /* Push error, but keep going*/
                    HDONE_ERROR(H5E_FILE, H5E_CANTRELEASE, FAIL, "can't release file free space info")

                /* at this point, only the superblock and superblock
                 * extension should be dirty.
                 */
                HDassert(H5AC_cache_is_clean(f, H5AC_RING_MDFSM));

                /* Flush the file again (if requested), as shutting down the
                 * free space manager may dirty some data structures again.
                 */
                if (flush) {
                    /* Clear status_flags */
                    f->shared->sblock->status_flags &= (uint8_t)(~H5F_SUPER_WRITE_ACCESS);
                    f->shared->sblock->status_flags &= (uint8_t)(~H5F_SUPER_SWMR_WRITE_ACCESS);

                    /* Mark EOA info dirty in cache, so change will get encoded */
                    if (H5F_eoa_dirty(f) < 0)
                        /* Push error, but keep going*/
                        HDONE_ERROR(H5E_FILE, H5E_CANTMARKDIRTY, FAIL, "unable to mark superblock as dirty")

                    /* Release any space allocated to space aggregators,
                     * so that the eoa value corresponds to the end of the
                     * space written to in the file.
                     *
                     * At most, this should change the superblock or the
                     * superblock extension messages.
                     */
                    if (H5MF_free_aggrs(f) < 0)
                        /* Push error, but keep going*/
                        HDONE_ERROR(H5E_FILE, H5E_CANTRELEASE, FAIL, "can't release file space")

                    /* Truncate the file to the current allocated size */
                    if (H5FD_truncate(f->shared->lf, TRUE) < 0)
                        /* Push error, but keep going*/
                        HDONE_ERROR(H5E_FILE, H5E_WRITEERROR, FAIL, "low level truncate failed")

                    /* at this point, only the superblock and superblock
                     * extension should be dirty.
                     */
                    HDassert(H5AC_cache_is_clean(f, H5AC_RING_MDFSM));
                } /* end if */
            }     /* end if */

            /* if it exists, unpin the driver information block cache entry,
             * since we're about to destroy the cache
             */
            if (f->shared->drvinfo)
                if (H5AC_unpin_entry(f->shared->drvinfo) < 0)
                    /* Push error, but keep going*/
                    HDONE_ERROR(H5E_FSPACE, H5E_CANTUNPIN, FAIL, "unable to unpin drvinfo")

            /* Unpin the superblock, since we're about to destroy the cache */
            if (H5AC_unpin_entry(f->shared->sblock) < 0)
                /* Push error, but keep going*/
                HDONE_ERROR(H5E_FSPACE, H5E_CANTUNPIN, FAIL, "unable to unpin superblock")
            f->shared->sblock = NULL;
        } /* end if */

        /* with the possible exception of the superblock and superblock
         * extension, the metadata cache should be clean at this point.
         *
         * Verify this.
         */
        HDassert(H5AC_cache_is_clean(f, H5AC_RING_MDFSM));

        /* Remove shared file struct from list of open files */
        if (H5F__sfile_remove(f->shared) < 0)
            /* Push error, but keep going*/
            HDONE_ERROR(H5E_FILE, H5E_CANTRELEASE, FAIL, "problems closing file")

        /* Shutdown the metadata cache */
        /* (Flushes any remaining dirty entries, which should only be the
         *      superblock and / or driver info at this point)
         */
        if (H5AC_dest(f))
            /* Push error, but keep going*/
            HDONE_ERROR(H5E_FILE, H5E_CANTRELEASE, FAIL, "problems closing file")

        /* Shutdown the page buffer cache */
        if (H5PB_dest(f->shared) < 0)
            /* Push error, but keep going*/
            HDONE_ERROR(H5E_FILE, H5E_CANTRELEASE, FAIL, "problems closing page buffer cache")

        /* Clean up the metadata cache log location string */
        if (f->shared->mdc_log_location)
            f->shared->mdc_log_location = (char *)H5MM_xfree(f->shared->mdc_log_location);

        /*
         * Do not close the root group since we didn't count it, but free
         * the memory associated with it.
         */
        if (f->shared->root_grp) {
            /* Free the root group */
            if (H5G_root_free(f->shared->root_grp) < 0)
                /* Push error, but keep going*/
                HDONE_ERROR(H5E_FILE, H5E_CANTRELEASE, FAIL, "problems closing file")
            f->shared->root_grp = NULL;
        } /* end if */

        /* Destroy other components of the file */
        if (H5F__accum_reset(f->shared, TRUE) < 0)
            /* Push error, but keep going*/
            HDONE_ERROR(H5E_FILE, H5E_CANTRELEASE, FAIL, "problems closing file")
        if (H5FO_dest(f) < 0)
            /* Push error, but keep going*/
            HDONE_ERROR(H5E_FILE, H5E_CANTRELEASE, FAIL, "problems closing file")
        f->shared->cwfs = (struct H5HG_heap_t **)H5MM_xfree(f->shared->cwfs);
        if (H5G_node_close(f) < 0)
            /* Push error, but keep going*/
            HDONE_ERROR(H5E_FILE, H5E_CANTRELEASE, FAIL, "problems closing file")

        /* Destroy file creation properties */
        if (H5I_GENPROP_LST != H5I_get_type(f->shared->fcpl_id))
            /* Push error, but keep going*/
            HDONE_ERROR(H5E_FILE, H5E_BADTYPE, FAIL, "not a property list")
        if (H5I_dec_ref(f->shared->fcpl_id) < 0)
            /* Push error, but keep going*/
            HDONE_ERROR(H5E_FILE, H5E_CANTDEC, FAIL, "can't close property list")

        /* Clean up the cached VOL connector ID & info */
        if (f->shared->vol_info)
            if (H5VL_free_connector_info(f->shared->vol_id, f->shared->vol_info) < 0)
                /* Push error, but keep going*/
                HDONE_ERROR(H5E_FILE, H5E_CANTRELEASE, FAIL, "unable to release VOL connector info object")
        if (f->shared->vol_id > 0)
            if (H5I_dec_ref(f->shared->vol_id) < 0)
                /* Push error, but keep going*/
                HDONE_ERROR(H5E_FILE, H5E_CANTDEC, FAIL, "can't close VOL connector ID")
        f->shared->vol_cls = NULL;

        /* Close the file */
        if (H5FD_close(f->shared->lf) < 0)
            /* Push error, but keep going*/
            HDONE_ERROR(H5E_FILE, H5E_CANTCLOSEFILE, FAIL, "unable to close file")

        /* Free mount table */
        f->shared->mtab.child  = (H5F_mount_t *)H5MM_xfree(f->shared->mtab.child);
        f->shared->mtab.nalloc = 0;

        /* Free the external link file */
        f->shared->extpath = (char *)H5MM_xfree(f->shared->extpath);

        /* Clean up the metadata retries array */
        for (actype = 0; actype < (int)H5AC_NTYPES; actype++)
            if (f->shared->retries[actype])
                f->shared->retries[actype] = (uint32_t *)H5MM_xfree(f->shared->retries[actype]);

        /* Destroy shared file struct */
        f->shared = (H5F_shared_t *)H5FL_FREE(H5F_shared_t, f->shared);
    }
    else if (f->shared->nrefs > 0) {
        /*
         * There are other references to the shared part of the file.
         * Only decrement the reference count.
         */
        --f->shared->nrefs;
    }

    /* Free the non-shared part of the file */
    f->open_name   = (char *)H5MM_xfree(f->open_name);
    f->actual_name = (char *)H5MM_xfree(f->actual_name);
    if (f->vol_obj && H5VL_free_object(f->vol_obj) < 0)
        HDONE_ERROR(H5E_FILE, H5E_CANTDEC, FAIL, "unable to free VOL object")
    f->vol_obj = NULL;
    if (H5FO_top_dest(f) < 0)
        HDONE_ERROR(H5E_FILE, H5E_CANTINIT, FAIL, "problems closing file")
    f->shared = NULL;
    f         = H5FL_FREE(H5F_t, f);

    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__dest() */

/*-------------------------------------------------------------------------
 * Function:    H5F__check_if_using_file_locks
 *
 * Purpose:     Determines if this file will use file locks.
 *
 * There are three ways that file locking can be controlled:
 *
 * 1) The configure/cmake option that sets the H5_USE_FILE_LOCKING
 *    symbol (which is used as the default fapl value).
 *
 * 2) The H5Pset_file_locking() API call, which will override
 *    the configuration default.
 *
 * 3) The HDF5_USE_FILE_LOCKING environment variable, which overrides
 *    everything above.
 *
 * The main reason to disable file locking is to prevent errors on file
 * systems where locking is not supported or has been disabled (as is
 * often the case in parallel file systems).
 *
 * Return:      SUCCEED/FAIL
 *-------------------------------------------------------------------------
 */
static herr_t
H5F__check_if_using_file_locks(H5P_genplist_t *fapl, hbool_t *use_file_locking)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_STATIC

    /* Make sure the out parameter has a value */
    *use_file_locking = TRUE;

    /* Check the fapl property */
    if (H5P_get(fapl, H5F_ACS_USE_FILE_LOCKING_NAME, use_file_locking) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, FAIL, "can't get use file locking flag")

    /* Check the environment variable */
    if (use_locks_env_g != FAIL)
        *use_file_locking = (use_locks_env_g == TRUE) ? TRUE : FALSE;

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__check_if_using_file_locks() */

/*-------------------------------------------------------------------------
 * Function:    H5F_open
 *
 * Purpose:    Opens (or creates) a file.  This function understands the
 *        following flags which are similar in nature to the Posix
 *        open(2) flags.
 *
 *        H5F_ACC_RDWR:    Open with read/write access. If the file is
 *                currently open for read-only access then it
 *                will be reopened. Absence of this flag
 *                implies read-only access.
 *
 *        H5F_ACC_CREAT:    Create a new file if it doesn't exist yet.
 *                The permissions are 0666 bit-wise AND with
 *                the current umask.  H5F_ACC_WRITE must also
 *                be specified.
 *
 *        H5F_ACC_EXCL:    This flag causes H5F_open() to fail if the
 *                file already exists.
 *
 *        H5F_ACC_TRUNC:    The file is truncated and a new HDF5 superblock
 *                is written.  This operation will fail if the
 *                file is already open.
 *
 *        Unlinking the file name from the group directed graph while
 *        the file is opened causes the file to continue to exist but
 *        one will not be able to upgrade the file from read-only
 *        access to read-write access by reopening it. Disk resources
 *        for the file are released when all handles to the file are
 *        closed. NOTE: This paragraph probably only applies to Unix;
 *        deleting the file name in other OS's has undefined results.
 *
 *        The CREATE_PARMS argument is optional.    A null pointer will
 *        cause the default file creation parameters to be used.
 *
 *        The ACCESS_PARMS argument is optional.  A null pointer will
 *        cause the default file access parameters to be used.
 *
 * The following two tables show results of file opens for single and concurrent access:
 *
 * SINGLE PROCESS ACCESS                        CONCURRENT ACCESS
 *
 *             #1st open#                                   #1st open#
 *             -- SR SR -- -- SR SR --                      -- SR SR -- -- SR SR --
 *             -- -- SW SW SW SW -- --                      -- -- SW SW SW SW -- --
 *              W  W  W  W  R  R  R  R                       W  W  W  W  R  R  R  R
 * #2nd open#                                   #2nd open#
 *            --------------------------                   --------------------------
 *   -- --  W | s  x  x  s  x  x  f  f |          -- --  W | f  x  x  f  x  x  f  f |
 *   SR --  W | x  x  x  x  x  x  x  x |          SR --  W | x  x  x  x  x  x  x  x |
 *   SR SW  W | x  x  x  x  x  x  x  x |          SR SW  W | x  x  x  x  x  x  x  x |
 *   -- SW  W | f  x  x  s  x  x  f  f |          -- SW  W | f  x  x  f  x  x  f  f |
 *   -- SW  R | x  x  x  x  x  x  x  x |          -- SW  R | x  x  x  x  x  x  x  x |
 *   SR SW  R | x  x  x  x  x  x  x  x |          SR SW  R | x  x  x  x  x  x  x  x |
 *   SR --  R | s  x  x  s  x  x  s  f |          SR --  R | f  x  x  s  x  x  s  s |
 *   -- --  R | s  x  x  s  x  x  s  s |          -- --  R | f  x  x  f  x  x  s  s |
 *            --------------------------                   --------------------------
 *
 *      Notations:
 *        W:  H5F_ACC_RDWR
 *        R:  H5F_ACC_RDONLY
 *        SW: H5F_ACC_SWMR_WRITE
 *        SR: H5F_ACC_SWMR_READ
 *
 *        x: the first open or second open itself fails due to invalid flags combination
 *        f: the open fails with flags combination from both the first and second opens
 *        s: the open succeeds with flags combination from both the first and second opens
 *
 *
 * Return:    Success:    A new file pointer.
 *        Failure:    NULL
 *-------------------------------------------------------------------------
 */
H5F_t *
H5F_open(const char *name, unsigned flags, hid_t fcpl_id, hid_t fapl_id)
{
    H5F_t *            file   = NULL; /*the success return value      */
    H5F_shared_t *     shared = NULL; /*shared part of `file'         */
    H5FD_t *           lf     = NULL; /*file driver part of `shared'  */
    unsigned           tent_flags;    /*tentative flags               */
    H5FD_class_t *     drvr;          /*file driver class info        */
    H5P_genplist_t *   a_plist;       /*file access property list     */
    H5F_close_degree_t fc_degree;     /*file close degree             */
    size_t             page_buf_size;
    unsigned           page_buf_min_meta_perc = 0;
    unsigned           page_buf_min_raw_perc  = 0;
    hbool_t            set_flag               = FALSE; /*set the status_flags in the superblock */
    hbool_t            clear                  = FALSE; /*clear the status_flags         */
    hbool_t            evict_on_close;                 /* evict on close value from plist  */
    hbool_t            use_file_locking = TRUE;        /* Using file locks? */
    hbool_t            ci_load          = FALSE;       /* whether MDC ci load requested */
    hbool_t            ci_write         = FALSE;       /* whether MDC CI write requested */
    H5F_t *            ret_value        = NULL;        /*actual return value           */

    FUNC_ENTER_NOAPI(NULL)

    /*
     * If the driver has a `cmp' method then the driver is capable of
     * determining when two file handles refer to the same file and the
     * library can insure that when the application opens a file twice
     * that the two handles coordinate their operations appropriately.
     * Otherwise it is the application's responsibility to never open the
     * same file more than once at a time.
     */
    if (NULL == (drvr = H5FD_get_class(fapl_id)))
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, NULL, "unable to retrieve VFL class")

    /* Get the file access property list, for future queries */
    if (NULL == (a_plist = (H5P_genplist_t *)H5I_object(fapl_id)))
        HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, NULL, "not file access property list")

    /* Check if we are using file locking */
    if (H5F__check_if_using_file_locks(a_plist, &use_file_locking) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, NULL, "unable to get file locking flag")

    /*
     * Opening a file is a two step process. First we try to open the
     * file in a way which doesn't affect its state (like not truncating
     * or creating it) so we can compare it with files that are already
     * open. If that fails then we try again with the full set of flags
     * (only if they're different than the original failed attempt).
     * However, if the file driver can't distinquish between files then
     * there's no reason to open the file tentatively because it's the
     * application's responsibility to prevent this situation (there's no
     * way for us to detect it here anyway).
     */
    if (drvr->cmp)
        tent_flags = flags & ~(H5F_ACC_CREAT | H5F_ACC_TRUNC | H5F_ACC_EXCL);
    else
        tent_flags = flags;

    if (NULL == (lf = H5FD_open(name, tent_flags, fapl_id, HADDR_UNDEF))) {
        if (tent_flags == flags)
            HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to open file: name = '%s', tent_flags = %x",
                        name, tent_flags)
        H5E_clear_stack(NULL);
        tent_flags = flags;
        if (NULL == (lf = H5FD_open(name, tent_flags, fapl_id, HADDR_UNDEF)))
            HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to open file: name = '%s', tent_flags = %x",
                        name, tent_flags)
    } /* end if */

    /* Is the file already open? */
    if ((shared = H5F__sfile_search(lf)) != NULL) {
        /*
         * The file is already open, so use that one instead of the one we
         * just opened. We only one one H5FD_t* per file so one doesn't
         * confuse the other.  But fail if this request was to truncate the
         * file (since we can't do that while the file is open), or if the
         * request was to create a non-existent file (since the file already
         * exists), or if the new request adds write access (since the
         * readers don't expect the file to change under them), or if the
         * SWMR write/read access flags don't agree.
         */
        if (H5FD_close(lf) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to close low-level file info")
        if (flags & H5F_ACC_TRUNC)
            HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to truncate a file which is already open")
        if (flags & H5F_ACC_EXCL)
            HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "file exists")
        if ((flags & H5F_ACC_RDWR) && 0 == (shared->flags & H5F_ACC_RDWR))
            HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "file is already open for read-only")

        if ((flags & H5F_ACC_SWMR_WRITE) && 0 == (shared->flags & H5F_ACC_SWMR_WRITE))
            HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL,
                        "SWMR write access flag not the same for file that is already open")
        if ((flags & H5F_ACC_SWMR_READ) &&
            !((shared->flags & H5F_ACC_SWMR_WRITE) || (shared->flags & H5F_ACC_SWMR_READ) ||
              (shared->flags & H5F_ACC_RDWR)))
            HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL,
                        "SWMR read access flag not the same for file that is already open")

        /* Allocate new "high-level" file struct */
        if ((file = H5F__new(shared, flags, fcpl_id, fapl_id, NULL)) == NULL)
            HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to create new file object")
    } /* end if */
    else {
        /* Check if tentative open was good enough */
        if (flags != tent_flags) {
            /*
             * This file is not yet open by the library and the flags we used to
             * open it are different than the desired flags. Close the tentative
             * file and open it for real.
             */
            if (H5FD_close(lf) < 0)
                HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to close low-level file info")

            if (NULL == (lf = H5FD_open(name, flags, fapl_id, HADDR_UNDEF)))
                HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to open file")
        } /* end if */

        /* Place an advisory lock on the file */
        if (use_file_locking)
            if (H5FD_lock(lf, (hbool_t)((flags & H5F_ACC_RDWR) ? TRUE : FALSE)) < 0) {
                /* Locking failed - Closing will remove the lock */
                if (H5FD_close(lf) < 0)
                    HDONE_ERROR(H5E_FILE, H5E_CANTCLOSEFILE, NULL, "unable to close low-level file info")
                HGOTO_ERROR(H5E_FILE, H5E_CANTLOCKFILE, NULL, "unable to lock the file")
            } /* end if */

        /* Create the 'top' file structure */
        if (NULL == (file = H5F__new(NULL, flags, fcpl_id, fapl_id, lf))) {
            /* If this is the only time the file has been opened and the struct
             * returned is NULL, H5FD_close() will never be called via H5F__dest()
             * so we have to close lf here before heading to the error handling.
             */
            if (H5FD_close(lf) < 0)
                HDONE_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to close low-level file info")
            HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to initialize file structure")
        } /* end if */

        /* Need to set status_flags in the superblock if the driver has a 'lock' method */
        if (drvr->lock)
            set_flag = TRUE;
    } /* end else */

    /* Check to see if both SWMR and cache image are requested.  Fail if so */
    if (H5C_cache_image_status(file, &ci_load, &ci_write) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, NULL, "can't get MDC cache image status")
    if ((ci_load || ci_write) && (flags & (H5F_ACC_SWMR_READ | H5F_ACC_SWMR_WRITE)))
        HGOTO_ERROR(H5E_FILE, H5E_UNSUPPORTED, NULL, "can't have both SWMR and cache image")

    /* Retain the name the file was opened with */
    file->open_name = H5MM_xstrdup(name);

    /* Short cuts */
    shared = file->shared;
    lf     = shared->lf;

    /* Set the file locking flag. If the file is already open, the file
     * requested file locking flag must match that of the open file.
     */
    if (shared->nrefs == 1)
        file->shared->use_file_locking = use_file_locking;
    else if (shared->nrefs > 1)
        if (file->shared->use_file_locking != use_file_locking)
            HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "file locking flag values don't match")

    /* Check if page buffering is enabled */
    if (H5P_get(a_plist, H5F_ACS_PAGE_BUFFER_SIZE_NAME, &page_buf_size) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, NULL, "can't get page buffer size")
    if (page_buf_size) {
#ifdef H5_HAVE_PARALLEL
        /* Collective metadata writes are not supported with page buffering */
        if (file->shared->coll_md_write)
            HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL,
                        "collective metadata writes are not supported with page buffering")

        /* Temporary: fail file create when page buffering feature is enabled for parallel */
        HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "page buffering is disabled for parallel")
#endif /* H5_HAVE_PARALLEL */
        /* Query for other page buffer cache properties */
        if (H5P_get(a_plist, H5F_ACS_PAGE_BUFFER_MIN_META_PERC_NAME, &page_buf_min_meta_perc) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTGET, NULL, "can't get minimum metadata fraction of page buffer")
        if (H5P_get(a_plist, H5F_ACS_PAGE_BUFFER_MIN_RAW_PERC_NAME, &page_buf_min_raw_perc) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTGET, NULL, "can't get minimum raw data fraction of page buffer")
    } /* end if */

    /*
     * Read or write the file superblock, depending on whether the file is
     * empty or not.
     */
    if (0 == (MAX(H5FD_get_eof(lf, H5FD_MEM_SUPER), H5FD_get_eoa(lf, H5FD_MEM_SUPER))) &&
        (flags & H5F_ACC_RDWR)) {
        /*
         * We've just opened a fresh new file (or truncated one). We need
         * to create & write the superblock.
         */

        /* Create the page buffer before initializing the superblock */
        if (page_buf_size)
            if (H5PB_create(shared, page_buf_size, page_buf_min_meta_perc, page_buf_min_raw_perc) < 0)
                HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "unable to create page buffer")

        /* Initialize information about the superblock and allocate space for it */
        /* (Writes superblock extension messages, if there are any) */
        if (H5F__super_init(file) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "unable to allocate file superblock")

        /* Create and open the root group */
        /* (This must be after the space for the superblock is allocated in
         *      the file, since the superblock must be at offset 0)
         */
        if (H5G_mkroot(file, TRUE) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "unable to create/open root group")
    } /* end if */
    else if (1 == shared->nrefs) {
        /* Read the superblock if it hasn't been read before. */
        if (H5F__super_read(file, a_plist, TRUE) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_READERROR, NULL, "unable to read superblock")

        /* Create the page buffer before initializing the superblock */
        if (page_buf_size)
            if (H5PB_create(shared, page_buf_size, page_buf_min_meta_perc, page_buf_min_raw_perc) < 0)
                HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "unable to create page buffer")

        /* Open the root group */
        if (H5G_mkroot(file, FALSE) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to read root group")
    } /* end if */

    /*
     * Decide the file close degree.  If it's the first time to open the
     * file, set the degree to access property list value; if it's the
     * second time or later, verify the access property list value matches
     * the degree in shared file structure.
     */
    if (H5P_get(a_plist, H5F_ACS_CLOSE_DEGREE_NAME, &fc_degree) < 0)
        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get file close degree")
    if (shared->nrefs == 1) {
        if (fc_degree == H5F_CLOSE_DEFAULT)
            shared->fc_degree = lf->cls->fc_degree;
        else
            shared->fc_degree = fc_degree;
    } /* end if */
    else if (shared->nrefs > 1) {
        if (fc_degree == H5F_CLOSE_DEFAULT && shared->fc_degree != lf->cls->fc_degree)
            HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "file close degree doesn't match")
        if (fc_degree != H5F_CLOSE_DEFAULT && fc_degree != shared->fc_degree)
            HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "file close degree doesn't match")
    } /* end if */

    /* This is a private property to clear the status_flags in the super block */
    /* Use by h5clear and a routine in test/flush2.c to clear the test file's status_flags */
    if (H5P_exist_plist(a_plist, H5F_ACS_CLEAR_STATUS_FLAGS_NAME) > 0) {
        if (H5P_get(a_plist, H5F_ACS_CLEAR_STATUS_FLAGS_NAME, &clear) < 0)
            HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get clearance for status_flags")
        else if (clear)
            file->shared->sblock->status_flags = 0;
    } /* end if */

    /* Record the evict-on-close MDC behavior.  If it's the first time opening
     * the file, set it to access property list value; if it's the second time
     * or later, verify that the access property list value matches the value
     * in shared file structure.
     */
    if (H5P_get(a_plist, H5F_ACS_EVICT_ON_CLOSE_FLAG_NAME, &evict_on_close) < 0)
        HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, NULL, "can't get evict on close value")
    if (shared->nrefs == 1)
        shared->evict_on_close = evict_on_close;
    else if (shared->nrefs > 1) {
        if (shared->evict_on_close != evict_on_close)
            HGOTO_ERROR(H5E_FILE, H5E_BADVALUE, NULL, "file evict-on-close value doesn't match")
    } /* end if */

    /* Formulate the absolute path for later search of target file for external links */
    if (shared->nrefs == 1) {
        if (H5_build_extpath(name, &file->shared->extpath) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "unable to build extpath")
    }

    /* Formulate the actual file name, after following symlinks, etc. */
    if (H5F__build_actual_name(file, a_plist, name, &file->actual_name) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "unable to build actual name")

    if (set_flag) {
        if (H5F_INTENT(file) & H5F_ACC_RDWR) { /* Set and check consistency of status_flags */
            /* Skip check of status_flags for file with < superblock version 3 */
            if (file->shared->sblock->super_vers >= HDF5_SUPERBLOCK_VERSION_3) {

                if (file->shared->sblock->status_flags & H5F_SUPER_WRITE_ACCESS ||
                    file->shared->sblock->status_flags & H5F_SUPER_SWMR_WRITE_ACCESS)
                    HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL,
                                "file is already open for write/SWMR write (may use <h5clear file> to clear "
                                "file consistency flags)")
            } /* version 3 superblock */

            file->shared->sblock->status_flags |= H5F_SUPER_WRITE_ACCESS;
            if (H5F_INTENT(file) & H5F_ACC_SWMR_WRITE)
                file->shared->sblock->status_flags |= H5F_SUPER_SWMR_WRITE_ACCESS;

            /* Flush the superblock & superblock extension */
            if (H5F_super_dirty(file) < 0)
                HGOTO_ERROR(H5E_FILE, H5E_CANTMARKDIRTY, NULL, "unable to mark superblock as dirty")
            if (H5F_flush_tagged_metadata(file, H5AC__SUPERBLOCK_TAG) < 0)
                HGOTO_ERROR(H5E_FILE, H5E_CANTFLUSH, NULL, "unable to flush superblock")
            if (H5F_flush_tagged_metadata(file, file->shared->sblock->ext_addr) < 0)
                HGOTO_ERROR(H5E_FILE, H5E_CANTFLUSH, NULL, "unable to flush superblock extension")

            /* Remove the file lock for SWMR_WRITE */
            if (use_file_locking && (H5F_INTENT(file) & H5F_ACC_SWMR_WRITE)) {
                if (H5FD_unlock(file->shared->lf) < 0)
                    HGOTO_ERROR(H5E_FILE, H5E_CANTUNLOCKFILE, NULL, "unable to unlock the file")
            }  /* end if */
        }      /* end if */
        else { /* H5F_ACC_RDONLY: check consistency of status_flags */
            /* Skip check of status_flags for file with < superblock version 3 */
            if (file->shared->sblock->super_vers >= HDF5_SUPERBLOCK_VERSION_3) {
                if (H5F_INTENT(file) & H5F_ACC_SWMR_READ) {
                    if ((file->shared->sblock->status_flags & H5F_SUPER_WRITE_ACCESS &&
                         !(file->shared->sblock->status_flags & H5F_SUPER_SWMR_WRITE_ACCESS)) ||
                        (!(file->shared->sblock->status_flags & H5F_SUPER_WRITE_ACCESS) &&
                         file->shared->sblock->status_flags & H5F_SUPER_SWMR_WRITE_ACCESS))
                        HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL,
                                    "file is not already open for SWMR writing")
                } /* end if */
                else if ((file->shared->sblock->status_flags & H5F_SUPER_WRITE_ACCESS) ||
                         (file->shared->sblock->status_flags & H5F_SUPER_SWMR_WRITE_ACCESS))
                    HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL,
                                "file is already open for write (may use <h5clear file> to clear file "
                                "consistency flags)")
            } /* version 3 superblock */
        }     /* end else */
    }         /* end if set_flag */

    /* Success */
    ret_value = file;

done:
    if ((NULL == ret_value) && file)
        if (H5F__dest(file, FALSE) < 0)
            HDONE_ERROR(H5E_FILE, H5E_CANTCLOSEFILE, NULL, "problems closing file")

    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F_open() */

/*-------------------------------------------------------------------------
 * Function:    H5F__post_open
 *
 * Purpose:     Finishes file open after wrapper context for file has been
 *              set.
 *
 * Return:      SUCCEED/FAIL
 *
 *-------------------------------------------------------------------------
 */
herr_t
H5F__post_open(H5F_t *f)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_PACKAGE

    /* Sanity check arguments */
    HDassert(f);

    /* Store a vol object in the file struct */
    if (NULL == (f->vol_obj = H5VL_create_object_using_vol_id(H5I_FILE, f, f->shared->vol_id)))
        HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, FAIL, "can't create VOL object")

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__post_open() */

/*-------------------------------------------------------------------------
 * Function:    H5F_flush_phase1
 *
 * Purpose:     First phase of flushing cached data.
 *
 * Return:      SUCCEED/FAIL
 *
 *-------------------------------------------------------------------------
 */
static herr_t
H5F__flush_phase1(H5F_t *f)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_STATIC

    /* Sanity check arguments */
    HDassert(f);

    /* Flush any cached dataset storage raw data */
    if (H5D_flush_all(f) < 0)
        /* Push error, but keep going*/
        HDONE_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "unable to flush dataset cache")

    /* Release any space allocated to space aggregators, so that the eoa value
     *  corresponds to the end of the space written to in the file.
     */
    /* (needs to happen before cache flush, with superblock write, since the
     *  'eoa' value is written in superblock -QAK)
     */
    if (H5MF_free_aggrs(f) < 0)
        /* Push error, but keep going*/
        HDONE_ERROR(H5E_FILE, H5E_CANTRELEASE, FAIL, "can't release file space")

    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__flush_phase1() */

/*-------------------------------------------------------------------------
 * Function:    H5F__flush_phase2
 *
 * Purpose:     Second phase of flushing cached data.
 *
 * Return:      SUCCEED/FAIL
 *
 *-------------------------------------------------------------------------
 */
static herr_t
H5F__flush_phase2(H5F_t *f, hbool_t closing)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_STATIC

    /* Sanity check arguments */
    HDassert(f);

    /* Inform the metadata cache that we are about to flush */
    if (H5AC_prep_for_file_flush(f) < 0)
        /* Push error, but keep going*/
        HDONE_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "prep for MDC flush failed")

    /* Flush the entire metadata cache */
    if (H5AC_flush(f) < 0)
        /* Push error, but keep going*/
        HDONE_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "unable to flush metadata cache")

#ifdef H5_HAVE_PARALLEL
    if (H5F_HAS_FEATURE(f, H5FD_FEAT_HAS_MPI)) {
        /* Since we just returned from a call to H5AC_flush(), we just
         * passed through a barrier.  Hence we can skip the barrier on
         * entry to the mpio file driver truncate call below, and the first
         * barrier in the following call to flush the cache again.
         */
        H5CX_set_mpi_file_flushing(TRUE);
    }
#endif /* H5_HAVE_PARALLEL */

    /* Truncate the file to the current allocated size */
    if (H5FD_truncate(f->shared->lf, closing) < 0)
        /* Push error, but keep going*/
        HDONE_ERROR(H5E_FILE, H5E_WRITEERROR, FAIL, "low level truncate failed")

    /* Flush the entire metadata cache again since the EOA could have changed in the truncate call. */
    if (H5AC_flush(f) < 0)
        /* Push error, but keep going*/
        HDONE_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "unable to flush metadata cache")

#ifdef H5_HAVE_PARALLEL
    if (H5F_HAS_FEATURE(f, H5FD_FEAT_HAS_MPI))
        /* Reset the "flushing the file" flag */
        H5CX_set_mpi_file_flushing(FALSE);
#endif /* H5_HAVE_PARALLEL */

    /* Inform the metadata cache that we are done with the flush */
    if (H5AC_secure_from_file_flush(f) < 0)
        /* Push error, but keep going*/
        HDONE_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "secure from MDC flush failed")

    /* Flush out the metadata accumulator */
    if (H5F__accum_flush(f->shared) < 0)
        /* Push error, but keep going*/
        HDONE_ERROR(H5E_IO, H5E_CANTFLUSH, FAIL, "unable to flush metadata accumulator")

    /* Flush the page buffer */
    if (H5PB_flush(f->shared) < 0)
        /* Push error, but keep going*/
        HDONE_ERROR(H5E_IO, H5E_CANTFLUSH, FAIL, "page buffer flush failed")

    /* Flush file buffers to disk. */
    if (H5FD_flush(f->shared->lf, closing) < 0)
        /* Push error, but keep going*/
        HDONE_ERROR(H5E_IO, H5E_CANTFLUSH, FAIL, "low level flush failed")

    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__flush_phase2() */

/*-------------------------------------------------------------------------
 * Function:    H5F__flush
 *
 * Purpose:     Flushes cached data.
 *
 * Return:      SUCCEED/FAIL
 *
 *-------------------------------------------------------------------------
 */
herr_t
H5F__flush(H5F_t *f)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_PACKAGE

    /* Sanity check arguments */
    HDassert(f);

    /* First phase of flushing data */
    if (H5F__flush_phase1(f) < 0)
        /* Push error, but keep going*/
        HDONE_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "unable to flush file data")

    /* Second phase of flushing data */
    if (H5F__flush_phase2(f, FALSE) < 0)
        /* Push error, but keep going*/
        HDONE_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "unable to flush file data")

    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__flush() */

/*-------------------------------------------------------------------------
 * Function:    H5F__close
 *
 * Purpose:     Closes a file or causes the close operation to be pended.
 *              This function is called two ways: from the API it gets called
 *              by H5Fclose->H5I_dec_ref->H5F__close when H5I_dec_ref()
 *              decrements the file ID reference count to zero.  The file ID
 *              is removed from the H5I_FILE group by H5I_dec_ref() just
 *              before H5F__close() is called. If there are open object
 *              headers then the close is pended by moving the file to the
 *              H5I_FILE_CLOSING ID group (the f->closing contains the ID
 *              assigned to file).
 *
 *              This function is also called directly from H5O_close() when
 *              the last object header is closed for the file and the file
 *              has a pending close.
 *
 * Return:      SUCCEED/FAIL
 *
 *-------------------------------------------------------------------------
 */
herr_t
H5F__close(H5F_t *f)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_PACKAGE

    /* Sanity check */
    HDassert(f);

    /* Perform checks for "semi" file close degree here, since closing the
     * file is not allowed if there are objects still open.
     */
    if (f->shared->fc_degree == H5F_CLOSE_SEMI) {
        unsigned nopen_files = 0; /* Number of open files in file/mount hierarchy */
        unsigned nopen_objs  = 0; /* Number of open objects in file/mount hierarchy */

        /* Get the number of open objects and open files on this file/mount hierarchy */
        if (H5F__mount_count_ids(f, &nopen_files, &nopen_objs) < 0)
            HGOTO_ERROR(H5E_SYM, H5E_MOUNT, FAIL, "problem checking mount hierarchy")

        /* If there are no other file IDs open on this file/mount hier., but
         * there are still open objects, issue an error and bail out now,
         * without decrementing the file ID's reference count and triggering
         * a "real" attempt at closing the file.
         */
        if (nopen_files == 1 && nopen_objs > 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTCLOSEFILE, FAIL, "can't close file, there are objects still open")
    }

    /* Reset the file ID for this file */
    f->id_exists = FALSE;

    /* Attempt to close the file/mount hierarchy */
    if (H5F_try_close(f, NULL) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTCLOSEFILE, FAIL, "can't close file")

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__close() */

/*-------------------------------------------------------------------------
 * Function:    H5F_try_close
 *
 * Purpose:     Attempts to close a file due to one of several actions:
 *              - The reference count on the file ID dropped to zero
 *              - The last open object was closed in the file
 *              - The file was unmounted
 *
 * Return:      SUCCEED/FAIL
 *
 *-------------------------------------------------------------------------
 */
herr_t
H5F_try_close(H5F_t *f, hbool_t *was_closed /*out*/)
{
    unsigned nopen_files = 0;       /* Number of open files in file/mount hierarchy */
    unsigned nopen_objs  = 0;       /* Number of open objects in file/mount hierarchy */
    herr_t   ret_value   = SUCCEED; /* Return value */

    FUNC_ENTER_NOAPI_NOINIT

    /* Sanity check */
    HDassert(f);
    HDassert(f->shared);

    /* Set the was_closed flag to the default value.
     * This flag lets downstream code know if the file struct is
     * still accessible and/or likely to contain useful data.
     * It's needed by the evict-on-close code. Clients can ignore
     * this value by passing in NULL.
     */
    if (was_closed)
        *was_closed = FALSE;

    /* Check if this file is already in the process of closing */
    if (f->closing) {
        if (was_closed)
            *was_closed = TRUE;
        HGOTO_DONE(SUCCEED)
    }

    /* Get the number of open objects and open files on this file/mount hierarchy */
    if (H5F__mount_count_ids(f, &nopen_files, &nopen_objs) < 0)
        HGOTO_ERROR(H5E_SYM, H5E_MOUNT, FAIL, "problem checking mount hierarchy")

    /*
     * Close file according to close degree:
     *
     *  H5F_CLOSE_WEAK:    if there are still objects open, wait until
     *            they are all closed.
     *  H5F_CLOSE_SEMI:    if there are still objects open, return fail;
     *            otherwise, close file.
     *  H5F_CLOSE_STRONG:    if there are still objects open, close them
     *            first, then close file.
     */
    switch (f->shared->fc_degree) {
        case H5F_CLOSE_WEAK:
            /*
             * If file or object IDS are still open then delay deletion of
             * resources until they have all been closed.  Flush all
             * caches and update the object header anyway so that failing to
             * close all objects isn't a major problem.
             */
            if ((nopen_files + nopen_objs) > 0)
                HGOTO_DONE(SUCCEED)
            break;

        case H5F_CLOSE_SEMI:
            /* Can leave safely if file IDs are still open on this file */
            if (nopen_files > 0)
                HGOTO_DONE(SUCCEED)

            /* Sanity check: If close degree if "semi" and we have gotten this
             * far and there are objects left open, bail out now.
             */
            HDassert(nopen_files == 0 && nopen_objs == 0);

            /* If we've gotten this far (ie. there are no open objects in the file), fall through to flush &
             * close */
            break;

        case H5F_CLOSE_STRONG:
            /* If there are other open files in the hierarchy, we can leave now */
            if (nopen_files > 0)
                HGOTO_DONE(SUCCEED)

            /* If we've gotten this far (ie. there are no open file IDs in the file/mount hierarchy), fall
             * through to flush & close */
            break;

        case H5F_CLOSE_DEFAULT:
        default:
            HGOTO_ERROR(H5E_FILE, H5E_CANTCLOSEFILE, FAIL, "can't close file, unknown file close degree")
    } /* end switch */

    /* Mark this file as closing (prevents re-entering file shutdown code below) */
    f->closing = TRUE;

    /* If the file close degree is "strong", close all the open objects in this file */
    if (f->shared->fc_degree == H5F_CLOSE_STRONG) {
        HDassert(nopen_files == 0);

        /* Forced close of all opened objects in this file */
        if (f->nopen_objs > 0) {
            size_t obj_count; /* # of open objects */
            hid_t  objs[128]; /* Array of objects to close */
            herr_t result;    /* Local result from obj ID query */
            size_t u;         /* Local index variable */

            /* Get the list of IDs of open dataset, group, & attribute objects */
            while ((result = H5F_get_obj_ids(
                        f, H5F_OBJ_LOCAL | H5F_OBJ_DATASET | H5F_OBJ_GROUP | H5F_OBJ_ATTR,
                        (int)(sizeof(objs) / sizeof(objs[0])), objs, FALSE, &obj_count)) <= 0 &&
                   obj_count != 0) {

                /* Try to close all the open objects in this file */
                for (u = 0; u < obj_count; u++)
                    if (H5I_dec_ref(objs[u]) < 0)
                        HGOTO_ERROR(H5E_ATOM, H5E_CLOSEERROR, FAIL, "can't close object")
            }
            if (result < 0)
                HGOTO_ERROR(H5E_FILE, H5E_BADITER, FAIL, "H5F_get_obj_ids failed(1)")

            /* Get the list of IDs of open named datatype objects */
            /* (Do this separately from the dataset & attribute IDs, because
             * they could be using one of the named datatypes and then the
             * open named datatype ID will get closed twice)
             */
            while ((result = H5F_get_obj_ids(f, H5F_OBJ_LOCAL | H5F_OBJ_DATATYPE,
                                             (int)(sizeof(objs) / sizeof(objs[0])), objs, FALSE,
                                             &obj_count)) <= 0 &&
                   obj_count != 0) {

                /* Try to close all the open objects in this file */
                for (u = 0; u < obj_count; u++)
                    if (H5I_dec_ref(objs[u]) < 0)
                        HGOTO_ERROR(H5E_ATOM, H5E_CLOSEERROR, FAIL, "can't close object")
            }
            if (result < 0)
                HGOTO_ERROR(H5E_INTERNAL, H5E_BADITER, FAIL, "H5F_get_obj_ids failed(2)")
        } /* end if */
    }     /* end if */

    /* Check if this is a child file in a mounting hierarchy & proceed up the
     * hierarchy if so.
     */
    if (f->parent)
        if (H5F_try_close(f->parent, NULL) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTCLOSEFILE, FAIL, "can't close parent file")

    /* Unmount and close each child before closing the current file. */
    if (H5F__close_mounts(f) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTCLOSEFILE, FAIL, "can't unmount child files")

    /* If there is more than one reference to the shared file struct and the
     * file has an external file cache, we should see if it can be closed.  This
     * can happen if a cycle is formed with external file caches.
     */
    if (f->shared->efc && (f->shared->nrefs > 1))
        if (H5F__efc_try_close(f) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTRELEASE, FAIL, "can't attempt to close EFC")

    /* Delay flush until the shared file struct is closed, in H5F__dest.  If the
     * application called H5Fclose, it would have been flushed in that function
     * (unless it will have been flushed in H5F__dest anyways).
     */

    /* Destroy the H5F_t struct and decrement the reference count for the
     * shared H5F_shared_t struct. If the reference count for the H5F_shared_t
     * struct reaches zero then destroy it also.
     */
    if (H5F__dest(f, TRUE) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTCLOSEFILE, FAIL, "problems closing file")

    /* Since we closed the file, this should be set to TRUE */
    if (was_closed)
        *was_closed = TRUE;
done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F_try_close() */

/*-------------------------------------------------------------------------
 * Function:    H5F__reopen
 *
 * Purpose:     Reopen a file.  The new file handle which is returned points
 *		        to the same file as the specified file handle.  Both handles
 *		        share caches and other information.  The only difference
 *		        between the handles is that the new handle is not mounted
 *		        anywhere and no files are mounted on it.
 *
 * Return:      Success:    A pointer to a file struct
 *
 *              Failure:    NULL
 *
 *-------------------------------------------------------------------------
 */
H5F_t *
H5F__reopen(H5F_t *f)
{
    H5F_t *ret_value = NULL; /* Return value */

    FUNC_ENTER_PACKAGE

    /* Get a new "top level" file struct, sharing the same "low level" file struct */
    if (NULL == (ret_value = H5F__new(f->shared, 0, H5P_FILE_CREATE_DEFAULT, H5P_FILE_ACCESS_DEFAULT, NULL)))
        HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, NULL, "unable to reopen file")

    /* Duplicate old file's names */
    ret_value->open_name   = H5MM_xstrdup(f->open_name);
    ret_value->actual_name = H5MM_xstrdup(f->actual_name);

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__reopen() */

/*-------------------------------------------------------------------------
 * Function:    H5F_get_id
 *
 * Purpose:     Get the file ID, incrementing it, or "resurrecting" it as
 *              appropriate.
 *
 * Return:      Success:    An ID for a file
 *
 *              Failure:    H5I_INVALID_HID
 *
 *-------------------------------------------------------------------------
 */
hid_t
H5F_get_id(H5F_t *file)
{
    hid_t ret_value = H5I_INVALID_HID; /* Return value */

    FUNC_ENTER_NOAPI_NOINIT

    HDassert(file);

    if (H5I_find_id(file, H5I_FILE, &ret_value) < 0 || H5I_INVALID_HID == ret_value) {
        /* resurrect the ID - Register an ID with the native connector */
        if ((ret_value = H5VL_wrap_register(H5I_FILE, file, FALSE)) < 0)
            HGOTO_ERROR(H5E_ATOM, H5E_CANTREGISTER, H5I_INVALID_HID, "unable to register group")
        file->id_exists = TRUE;
    }
    else {
        /* Increment reference count on existing ID */
        if (H5I_inc_ref(ret_value, FALSE) < 0)
            HGOTO_ERROR(H5E_ATOM, H5E_CANTINC, H5I_INVALID_HID, "incrementing file ID failed")
    } /* end else */

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F_get_id() */

/*-------------------------------------------------------------------------
 * Function:    H5F_incr_nopen_objs
 *
 * Purpose:     Increment the number of open objects for a file.
 *
 * Return:      Success:    The number of open objects, after the increment
 *              Failure:    (can't happen)
 *-------------------------------------------------------------------------
 */
unsigned
H5F_incr_nopen_objs(H5F_t *f)
{
    /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */
    FUNC_ENTER_NOAPI_NOINIT_NOERR

    HDassert(f);

    FUNC_LEAVE_NOAPI(++f->nopen_objs)
} /* end H5F_incr_nopen_objs() */

/*-------------------------------------------------------------------------
 * Function:    H5F_decr_nopen_objs
 *
 * Purpose:     Decrement the number of open objects for a file.
 *
 * Return:      Success:    The number of open objects, after the decrement
 *              Failure:    (can't happen)
 *-------------------------------------------------------------------------
 */
unsigned
H5F_decr_nopen_objs(H5F_t *f)
{
    /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */
    FUNC_ENTER_NOAPI_NOINIT_NOERR

    HDassert(f);

    FUNC_LEAVE_NOAPI(--f->nopen_objs)
} /* end H5F_decr_nopen_objs() */

/*-------------------------------------------------------------------------
 * Function:    H5F__build_actual_name
 *
 * Purpose:     Retrieve the name of a file, after following symlinks, etc.
 *
 * Note:        Currently only working for "POSIX I/O compatible" VFDs
 *
 * Return:      SUCCEED/FAIL
 *-------------------------------------------------------------------------
 */
static herr_t
H5F__build_actual_name(const H5F_t *f, const H5P_genplist_t *fapl, const char *name,
                       char **actual_name /*out*/)
{
    hid_t new_fapl_id = H5I_INVALID_HID; /* ID for duplicated FAPL */
#ifdef H5_HAVE_SYMLINK
    /* This has to be declared here to avoid unfreed resources on errors */
    char *realname = NULL;      /* Fully resolved path name of file */
#endif                          /* H5_HAVE_SYMLINK */
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_STATIC

    /* Sanity check */
    HDassert(f);
    HDassert(fapl);
    HDassert(name);
    HDassert(actual_name);

    /* Clear actual name pointer to begin with */
    *actual_name = NULL;

/* Assume that if the OS can't create symlinks, that we don't need to worry
 *      about resolving them either. -QAK
 */
#ifdef H5_HAVE_SYMLINK
    /* Check for POSIX I/O compatible file handle */
    if (H5F_HAS_FEATURE(f, H5FD_FEAT_POSIX_COMPAT_HANDLE)) {
        h5_stat_t lst; /* Stat info from lstat() call */

        /* Call lstat() on the file's name */
        if (HDlstat(name, &lst) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTGET, FAIL, "can't retrieve stat info for file")

        /* Check for symbolic link */
        if (S_IFLNK == (lst.st_mode & S_IFMT)) {
            H5P_genplist_t *new_fapl;      /* Duplicated FAPL */
            int *           fd;            /* POSIX I/O file descriptor */
            h5_stat_t       st;            /* Stat info from stat() call */
            h5_stat_t       fst;           /* Stat info from fstat() call */
            hbool_t         want_posix_fd; /* Flag for retrieving file descriptor from VFD */

            /* Allocate realname buffer */
            if (NULL == (realname = (char *)H5MM_calloc((size_t)PATH_MAX * sizeof(char))))
                HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed")

            /* Perform a sanity check that the file or link wasn't switched
             * between when we opened it and when we called lstat().  This is
             * according to the security best practices for lstat() documented
             * here:
             * https://www.securecoding.cert.org/confluence/display/seccode/POS35-C.+Avoid+race+conditions+while+checking+for+the+existence+of+a+symbolic+link
             */

            /* Copy the FAPL object to modify */
            if ((new_fapl_id = H5P_copy_plist(fapl, FALSE)) < 0)
                HGOTO_ERROR(H5E_FILE, H5E_CANTCOPY, FAIL, "unable to copy file access property list")
            if (NULL == (new_fapl = (H5P_genplist_t *)H5I_object(new_fapl_id)))
                HGOTO_ERROR(H5E_FILE, H5E_CANTCREATE, FAIL, "can't get property list")

            /* Set the character encoding on the new property list */
            want_posix_fd = TRUE;
            if (H5P_set(new_fapl, H5F_ACS_WANT_POSIX_FD_NAME, &want_posix_fd) < 0)
                HGOTO_ERROR(H5E_PLIST, H5E_CANTSET, FAIL, "can't set character encoding")

            /* Retrieve the file handle */
            if (H5F_get_vfd_handle(f, new_fapl_id, (void **)&fd) < 0)
                HGOTO_ERROR(H5E_FILE, H5E_CANTGET, FAIL, "can't retrieve POSIX file descriptor")

            /* Stat the filename we're resolving */
            if (HDstat(name, &st) < 0)
                HSYS_GOTO_ERROR(H5E_FILE, H5E_BADFILE, FAIL, "unable to stat file")

            /* Stat the file we opened */
            if (HDfstat(*fd, &fst) < 0)
                HSYS_GOTO_ERROR(H5E_FILE, H5E_BADFILE, FAIL, "unable to fstat file")

            /* Verify that the files are really the same */
            if (st.st_mode != fst.st_mode || st.st_ino != fst.st_ino || st.st_dev != fst.st_dev)
                HGOTO_ERROR(H5E_FILE, H5E_BADVALUE, FAIL, "files' st_ino or st_dev fields changed!")

            /* Get the resolved path for the file name */
            if (NULL == HDrealpath(name, realname))
                HGOTO_ERROR(H5E_FILE, H5E_CANTGET, FAIL, "can't retrieve real path for file")

            /* Duplicate the resolved path for the file name */
            if (NULL == (*actual_name = (char *)H5MM_strdup(realname)))
                HGOTO_ERROR(H5E_FILE, H5E_CANTALLOC, FAIL, "can't duplicate real path")
        } /* end if */
    }     /* end if */
#endif    /* H5_HAVE_SYMLINK */

    /* Check if we've resolved the file's name */
    if (NULL == *actual_name) {
        /* Just duplicate the name used to open the file */
        if (NULL == (*actual_name = (char *)H5MM_strdup(name)))
            HGOTO_ERROR(H5E_FILE, H5E_CANTALLOC, FAIL, "can't duplicate open name")
    } /* end else */

done:
    /* Close the property list */
    if (new_fapl_id > 0)
        if (H5I_dec_app_ref(new_fapl_id) < 0)
            HDONE_ERROR(H5E_FILE, H5E_CANTCLOSEOBJ, FAIL, "can't close duplicated FAPL")
#ifdef H5_HAVE_SYMLINK
    if (realname)
        realname = (char *)H5MM_xfree(realname);
#endif /* H5_HAVE_SYMLINK */

    FUNC_LEAVE_NOAPI(ret_value)
} /* H5F__build_actual_name() */

/*-------------------------------------------------------------------------
 * Function:    H5F_addr_encode_len
 *
 * Purpose:     Encodes an address into the buffer pointed to by *PP and
 *              then increments the pointer to the first byte after the
 *              address.  An undefined value is stored as all 1's.
 *
 * Return:      void
 *-------------------------------------------------------------------------
 */
void
H5F_addr_encode_len(size_t addr_len, uint8_t **pp /*in,out*/, haddr_t addr)
{
    unsigned u; /* Local index variable */

    /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */
    FUNC_ENTER_NOAPI_NOINIT_NOERR

    HDassert(addr_len);
    HDassert(pp && *pp);

    if (H5F_addr_defined(addr)) {
        for (u = 0; u < addr_len; u++) {
            *(*pp)++ = (uint8_t)(addr & 0xff);
            addr >>= 8;
        } /* end for */
        HDassert("overflow" && 0 == addr);
    } /* end if */
    else {
        for (u = 0; u < addr_len; u++)
            *(*pp)++ = 0xff;
    } /* end else */

    FUNC_LEAVE_NOAPI_VOID
} /* end H5F_addr_encode_len() */

/*-------------------------------------------------------------------------
 * Function:    H5F_addr_encode
 *
 * Purpose:     Encodes an address into the buffer pointed to by *PP and
 *              then increments the pointer to the first byte after the
 *              address.  An undefined value is stored as all 1's.
 *
 * Return:      void
 *-------------------------------------------------------------------------
 */
void
H5F_addr_encode(const H5F_t *f, uint8_t **pp /*in,out*/, haddr_t addr)
{
    /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */
    FUNC_ENTER_NOAPI_NOINIT_NOERR

    HDassert(f);

    H5F_addr_encode_len(H5F_SIZEOF_ADDR(f), pp, addr);

    FUNC_LEAVE_NOAPI_VOID
} /* end H5F_addr_encode() */

/*-------------------------------------------------------------------------
 * Function:    H5F_addr_decode_len
 *
 * Purpose:     Decodes an address from the buffer pointed to by *PP and
 *              updates the pointer to point to the next byte after the
 *              address.
 *
 *              If the value read is all 1's then the address is returned
 *              with an undefined value.
 *
 * Return:      void
 *-------------------------------------------------------------------------
 */
void
H5F_addr_decode_len(size_t addr_len, const uint8_t **pp /*in,out*/, haddr_t *addr_p /*out*/)
{
    hbool_t  all_zero = TRUE; /* True if address was all zeroes */
    unsigned u;               /* Local index variable */

    /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */
    FUNC_ENTER_NOAPI_NOINIT_NOERR

    HDassert(addr_len);
    HDassert(pp && *pp);
    HDassert(addr_p);

    /* Reset value in destination */
    *addr_p = 0;

    /* Decode bytes from address */
    for (u = 0; u < addr_len; u++) {
        uint8_t c; /* Local decoded byte */

        /* Get decoded byte (and advance pointer) */
        c = *(*pp)++;

        /* Check for non-undefined address byte value */
        if (c != 0xff)
            all_zero = FALSE;

        if (u < sizeof(*addr_p)) {
            haddr_t tmp = c; /* Local copy of address, for casting */

            /* Shift decoded byte to correct position */
            tmp <<= (u * 8); /*use tmp to get casting right */

            /* Merge into already decoded bytes */
            *addr_p |= tmp;
        } /* end if */
        else if (!all_zero)
            HDassert(0 == **pp); /*overflow */
    }                            /* end for */

    /* If 'all_zero' is still TRUE, the address was entirely composed of '0xff'
     *  bytes, which is the encoded form of 'HADDR_UNDEF', so set the destination
     *  to that value */
    if (all_zero)
        *addr_p = HADDR_UNDEF;

    FUNC_LEAVE_NOAPI_VOID
} /* end H5F_addr_decode_len() */

/*-------------------------------------------------------------------------
 * Function:    H5F_addr_decode
 *
 * Purpose:     Decodes an address from the buffer pointed to by *PP and
 *              updates the pointer to point to the next byte after the
 *              address.
 *
 *              If the value read is all 1's then the address is returned
 *              with an undefined value.
 *
 * Return:      void
 *-------------------------------------------------------------------------
 */
void
H5F_addr_decode(const H5F_t *f, const uint8_t **pp /*in,out*/, haddr_t *addr_p /*out*/)
{
    /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */
    FUNC_ENTER_NOAPI_NOINIT_NOERR

    HDassert(f);

    H5F_addr_decode_len(H5F_SIZEOF_ADDR(f), pp, addr_p);

    FUNC_LEAVE_NOAPI_VOID
} /* end H5F_addr_decode() */

/*-------------------------------------------------------------------------
 * Function:    H5F_set_grp_btree_shared
 *
 * Purpose:     Set the grp_btree_shared field with a valid ref-count pointer.
 *
 * Return:      SUCCEED/FAIL
 *-------------------------------------------------------------------------
 */
herr_t
H5F_set_grp_btree_shared(H5F_t *f, H5UC_t *rc)
{
    /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */
    FUNC_ENTER_NOAPI_NOINIT_NOERR

    /* Sanity check */
    HDassert(f);
    HDassert(f->shared);
    HDassert(rc);

    f->shared->grp_btree_shared = rc;

    FUNC_LEAVE_NOAPI(SUCCEED)
} /* H5F_set_grp_btree_shared() */

/*-------------------------------------------------------------------------
 * Function:    H5F_set_sohm_addr
 *
 * Purpose:     Set the sohm_addr field with a new value.
 *
 * Return:      SUCCEED/FAIL
 *-------------------------------------------------------------------------
 */
herr_t
H5F_set_sohm_addr(H5F_t *f, haddr_t addr)
{
    /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */
    FUNC_ENTER_NOAPI_NOINIT_NOERR

    /* Sanity check */
    HDassert(f);
    HDassert(f->shared);

    f->shared->sohm_addr = addr;

    FUNC_LEAVE_NOAPI(SUCCEED)
} /* H5F_set_sohm_addr() */

/*-------------------------------------------------------------------------
 * Function:    H5F_set_sohm_vers
 *
 * Purpose:     Set the sohm_vers field with a new value.
 *
 * Return:      SUCCEED/FAIL
 *-------------------------------------------------------------------------
 */
herr_t
H5F_set_sohm_vers(H5F_t *f, unsigned vers)
{
    /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */
    FUNC_ENTER_NOAPI_NOINIT_NOERR

    /* Sanity check */
    HDassert(f);
    HDassert(f->shared);

    f->shared->sohm_vers = vers;

    FUNC_LEAVE_NOAPI(SUCCEED)
} /* H5F_set_sohm_vers() */

/*-------------------------------------------------------------------------
 * Function:    H5F_set_sohm_nindexes
 *
 * Purpose:     Set the sohm_nindexes field with a new value.
 *
 * Return:      SUCCEED/FAIL
 *-------------------------------------------------------------------------
 */
herr_t
H5F_set_sohm_nindexes(H5F_t *f, unsigned nindexes)
{
    /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */
    FUNC_ENTER_NOAPI_NOINIT_NOERR

    /* Sanity check */
    HDassert(f);
    HDassert(f->shared);

    f->shared->sohm_nindexes = nindexes;

    FUNC_LEAVE_NOAPI(SUCCEED)
} /* H5F_set_sohm_nindexes() */

/*-------------------------------------------------------------------------
 * Function:    H5F_set_store_msg_crt_idx
 *
 * Purpose:     Set the store_msg_crt_idx field with a new value.
 *
 * Return:      SUCCEED/FAIL
 *-------------------------------------------------------------------------
 */
herr_t
H5F_set_store_msg_crt_idx(H5F_t *f, hbool_t flag)
{
    /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */
    FUNC_ENTER_NOAPI_NOINIT_NOERR

    /* Sanity check */
    HDassert(f);
    HDassert(f->shared);

    f->shared->store_msg_crt_idx = flag;

    FUNC_LEAVE_NOAPI(SUCCEED)
} /* H5F_set_store_msg_crt_idx() */

/*-------------------------------------------------------------------------
 * Function:    H5F__set_libver_bounds()
 *
 * Purpose:     Set the file's low and high bound to the input parameters
 *              'low' and 'high' respectively.
 *              This is done only if the existing setting is different
 *              from the inputs.
 *
 * Return:      SUCCEED/FAIL
 *
 * Programmer:  Vailin Choi; December 2017
 *
 *-------------------------------------------------------------------------
 */
herr_t
H5F__set_libver_bounds(H5F_t *f, H5F_libver_t low, H5F_libver_t high)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_PACKAGE

    /* Sanity checks */
    HDassert(f);
    HDassert(f->shared);

    /* Set the bounds only if the existing setting is different from the inputs */
    if (f->shared->low_bound != low || f->shared->high_bound != high) {
        /* Call the flush routine, for this file */
        /* Note: This is done in case the binary format for representing a
         *      metadata entry class changes when the file format low / high
         *      bounds are changed and an unwritten entry of that class is
         *      sitting in the metadata cache.
         *
         *      If that happens, it's possible that the entry's size could
         *      become larger, potentially corrupting the file (if the larger
         *      entry is fully written, overwriting data outside its allocated
         *      space), or corrupting the entry (if the entry is truncated to
         *      fit into the allocated space).
         *
         *      Although I'm not aware of any metadata with this behavior
         *      currently, it would be very difficult to guard against and / or
         *      detect, but if we flush everything here, the format version
         *      for metadata entries in the cache will be finalized and these
         *      sorts of problems can be avoided.
         *
         *      QAK - April, 2018
         */
        if (H5F__flush(f) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTFLUSH, FAIL, "unable to flush file's cached information")

        /* Set the new bounds */
        f->shared->low_bound  = low;
        f->shared->high_bound = high;
    }

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* H5F__set_libver_bounds() */

/*-------------------------------------------------------------------------
 * Function:    H5F__get_file_image
 *
 * Purpose:     Private version of H5Fget_file_image
 *
 * Return:      Success:        Bytes copied / number of bytes needed.
 *              Failure:        -1
 *-------------------------------------------------------------------------
 */
ssize_t
H5F__get_file_image(H5F_t *file, void *buf_ptr, size_t buf_len)
{
    H5FD_t *fd_ptr;         /* file driver */
    haddr_t eoa;            /* End of file address */
    ssize_t ret_value = -1; /* Return value */

    FUNC_ENTER_PACKAGE

    /* Check args */
    if (!file || !file->shared || !file->shared->lf)
        HGOTO_ERROR(H5E_FILE, H5E_BADVALUE, (-1), "file_id yields invalid file pointer")
    fd_ptr = file->shared->lf;
    if (!fd_ptr->cls)
        HGOTO_ERROR(H5E_FILE, H5E_BADVALUE, (-1), "fd_ptr yields invalid class pointer")

    /* the address space used by the split and multi file drivers is not
     * a good fit for this call.  Since the plan is to depreciate these
     * drivers anyway, don't bother to do a "force fit".
     *
     * The following clause tests for the multi file driver, and fails
     * if the supplied file has the multi file driver as its top level
     * file driver.  However, this test will not work if there is some
     * other file driver sitting on top of the multi file driver.
     *
     * I'm not sure if this is possible at present, but in all likelyhood,
     * it will become possible in the future.  On the other hand, we may
     * remove the split/multi file drivers before then.
     *
     * I am leaving this solution in for now, but we should review it,
     * and improve the solution if necessary.
     *
     *                                          JRM -- 11/11/22
     */
    if (HDstrcmp(fd_ptr->cls->name, "multi") == 0)
        HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, (-1), "Not supported for multi file driver.")

    /* While the family file driver is conceptually fully compatible
     * with the get file image operation, it sets a file driver message
     * in the super block that prevents the image being opened with any
     * driver other than the family file driver.  Needless to say, this
     * rather defeats the purpose of the get file image operation.
     *
     * While this problem is quire solvable, the required time and
     * resources are lacking at present.  Hence, for now, we don't
     * allow the get file image operation to be perfomed on files
     * opened with the family file driver.
     *
     * Observe that the following test only looks at the top level
     * driver, and fails if there is some other driver sitting on to
     * of the family file driver.
     *
     * I don't think this can happen at present, but that may change
     * in the future.
     *                                   JRM -- 12/21/11
     */
    if (HDstrcmp(fd_ptr->cls->name, "family") == 0)
        HGOTO_ERROR(H5E_FILE, H5E_BADVALUE, (-1), "Not supported for family file driver.")

    /* Go get the actual file size */
    if (HADDR_UNDEF == (eoa = H5FD_get_eoa(file->shared->lf, H5FD_MEM_DEFAULT)))
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, (-1), "unable to get file size")

    /* set ret_value = to eoa -- will overwrite this if appropriate */
    ret_value = (ssize_t)eoa;

    /* test to see if a buffer was provided -- if not, we are done */
    if (buf_ptr != NULL) {
        size_t   space_needed; /* size of file image */
        unsigned tmp, tmp_size;

        /* Check for buffer too small */
        if ((haddr_t)buf_len < eoa)
            HGOTO_ERROR(H5E_FILE, H5E_BADVALUE, (-1), "supplied buffer too small")

        space_needed = (size_t)eoa;

        /* read in the file image */
        /* (Note compensation for base address addition in internal routine) */
        if (H5FD_read(fd_ptr, H5FD_MEM_DEFAULT, 0, space_needed, buf_ptr) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_READERROR, (-1), "file image read request failed")

        /* Offset to "status_flags" in the superblock */
        tmp = H5F_SUPER_STATUS_FLAGS_OFF(file->shared->sblock->super_vers);

        /* Size of "status_flags" depends on the superblock version */
        tmp_size = H5F_SUPER_STATUS_FLAGS_SIZE(file->shared->sblock->super_vers);

        /* Clear "status_flags" */
        HDmemset((uint8_t *)buf_ptr + tmp, 0, tmp_size);
    } /* end if */

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* H5F__get_file_image() */

/*-------------------------------------------------------------------------
 * Function:    H5F__get_info
 *
 * Purpose:     Private version of H5Fget_info
 *
 * Return:      Success:        SUCCEED
 *              Failure:        FAIL
 *-------------------------------------------------------------------------
 */
herr_t
H5F__get_info(H5F_t *f, H5F_info2_t *finfo)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_PACKAGE

    /* Sanity check */
    HDassert(f);
    HDassert(f->shared);
    HDassert(finfo);

    /* Reset file info struct */
    HDmemset(finfo, 0, sizeof(*finfo));

    /* Get the size of the superblock and any superblock extensions */
    if (H5F__super_size(f, &finfo->super.super_size, &finfo->super.super_ext_size) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, FAIL, "unable to retrieve superblock sizes")

    /* Get the size of any persistent free space */
    if (H5MF_get_freespace(f, &finfo->free.tot_space, &finfo->free.meta_size) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, FAIL, "unable to retrieve free space information")

    /* Check for SOHM info */
    if (H5F_addr_defined(f->shared->sohm_addr))
        if (H5SM_ih_size(f, &finfo->sohm.hdr_size, &finfo->sohm.msgs_info) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTGET, FAIL, "unable to retrieve SOHM index & heap storage info")

    /* Set version # fields */
    finfo->super.version = f->shared->sblock->super_vers;
    finfo->sohm.version  = f->shared->sohm_vers;
    finfo->free.version  = HDF5_FREESPACE_VERSION;

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* H5F__get_info() */

/*-------------------------------------------------------------------------
 * Function:    H5F_track_metadata_read_retries
 *
 * Purpose:     To track the # of a "retries" (log10) for a metadata item.
 *              This routine should be used only when:
 *              "retries" > 0
 *              f->shared->read_attempts > 1 (does not have retry when 1)
 *              f->shared->retries_nbins > 0 (calculated based on f->shared->read_attempts)
 *
 * Return:      SUCCEED/FAIL
 *-------------------------------------------------------------------------
 */
herr_t
H5F_track_metadata_read_retries(H5F_t *f, unsigned actype, unsigned retries)
{
    unsigned log_ind;             /* Index to the array of retries based on log10 of retries */
    double   tmp;                 /* Temporary value, to keep compiler quiet */
    herr_t   ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_NOAPI(FAIL)

    /* Sanity check */
    HDassert(f);
    HDassert(f->shared->read_attempts > 1);
    HDassert(f->shared->retries_nbins > 0);
    HDassert(retries > 0);
    HDassert(retries < f->shared->read_attempts);
    HDassert(actype < H5AC_NTYPES);

    /* Allocate memory for retries */
    if (NULL == f->shared->retries[actype])
        if (NULL == (f->shared->retries[actype] =
                         (uint32_t *)H5MM_calloc((size_t)f->shared->retries_nbins * sizeof(uint32_t))))
            HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed")

    /* Index to retries based on log10 */
    tmp     = HDlog10((double)retries);
    log_ind = (unsigned)tmp;
    HDassert(log_ind < f->shared->retries_nbins);

    /* Increment the # of the "retries" */
    f->shared->retries[actype][log_ind]++;

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* H5F_track_metadata_read_retries() */

/*-------------------------------------------------------------------------
 * Function:    H5F_set_retries
 *
 * Purpose:     To initialize data structures for read retries:
 *              --zero out "retries"
 *              --set up "retries_nbins" based on read_attempts
 *
 * Return:      SUCCEED/FAIL
 *-------------------------------------------------------------------------
 */
herr_t
H5F_set_retries(H5F_t *f)
{
    double tmp; /* Temporary variable */

    /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */
    FUNC_ENTER_NOAPI_NOINIT_NOERR

    /* Sanity check */
    HDassert(f);

    /* Initialize the tracking for metadata read retries */
    HDmemset(f->shared->retries, 0, sizeof(f->shared->retries));

    /* Initialize the # of bins for retries */
    f->shared->retries_nbins = 0;
    if (f->shared->read_attempts > 1) {
        /* Use HDceil to ensure that the log10 value is rounded up to the
           nearest integer before casting to unsigned */
        tmp                      = HDceil(HDlog10((double)f->shared->read_attempts));
        f->shared->retries_nbins = (unsigned)tmp;
    }

    FUNC_LEAVE_NOAPI(SUCCEED)
} /* H5F_set_retries() */

/*-------------------------------------------------------------------------
 * Function:    H5F_object_flush_cb
 *
 * Purpose:     To invoke the callback function for object flush that is set
 *              in the file's access property list.
 *
 * Return:      Success:        SUCCEED
 *              Failure:        FAIL
 *-------------------------------------------------------------------------
 */
herr_t
H5F_object_flush_cb(H5F_t *f, hid_t obj_id)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_NOAPI(FAIL)

    /* Sanity check */
    HDassert(f);
    HDassert(f->shared);

    /* Invoke object flush callback if there is one */
    if (f->shared->object_flush.func &&
        f->shared->object_flush.func(obj_id, f->shared->object_flush.udata) < 0)
        HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "object flush callback returns error")

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* H5F_object_flush_cb() */

/*-------------------------------------------------------------------------
 * Function: H5F__set_base_addr
 *
 * Purpose:  Quick and dirty routine to set the file's 'base_addr' value
 *
 * Return:   Non-negative on success/Negative on failure
 *-------------------------------------------------------------------------
 */
herr_t
H5F__set_base_addr(const H5F_t *f, haddr_t addr)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_PACKAGE

    HDassert(f);
    HDassert(f->shared);

    /* Dispatch to driver */
    if (H5FD_set_base_addr(f->shared->lf, addr) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, FAIL, "driver set_base_addr request failed")

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__set_base_addr() */

/*-------------------------------------------------------------------------
 * Function: H5F__set_eoa
 *
 * Purpose:  Quick and dirty routine to set the file's 'eoa' value
 *
 * Return:   Non-negative on success/Negative on failure
 *-------------------------------------------------------------------------
 */
herr_t
H5F__set_eoa(const H5F_t *f, H5F_mem_t type, haddr_t addr)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_PACKAGE

    HDassert(f);
    HDassert(f->shared);

    /* Dispatch to driver */
    /* (H5FD_set_eoa() will add base_addr to addr) */
    if (H5FD_set_eoa(f->shared->lf, type, addr) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, FAIL, "driver set_eoa request failed")

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__set_eoa() */

/*-------------------------------------------------------------------------
 * Function: H5F__set_paged_aggr
 *
 * Purpose:  Quick and dirty routine to set the file's paged_aggr mode
 *
 * Return:   Non-negative on success/Negative on failure
 *-------------------------------------------------------------------------
 */
herr_t
H5F__set_paged_aggr(const H5F_t *f, hbool_t paged)
{
    herr_t ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_PACKAGE

    /* Sanity check */
    HDassert(f);
    HDassert(f->shared);

    /* Dispatch to driver */
    if (H5FD_set_paged_aggr(f->shared->lf, paged) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, FAIL, "driver set paged aggr mode failed")

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__set_paged_aggr() */

/*-------------------------------------------------------------------------
 * Function:    H5F__get_max_eof_eoa
 *
 * Purpose:     Determine the maximum of (EOA, EOF) for the file
 *
 * Return:      SUCCEED/FAIL
 *-------------------------------------------------------------------------
 */
herr_t
H5F__get_max_eof_eoa(const H5F_t *f, haddr_t *max_eof_eoa)
{
    haddr_t eof; /* Relative address for EOF */
    haddr_t eoa; /* Relative address for EOA */
    haddr_t tmp_max;
    herr_t  ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_PACKAGE

    /* Sanity checks */
    HDassert(f);
    HDassert(f->shared);

    /* Get the relative EOA and EOF */
    eoa = H5FD_get_eoa(f->shared->lf, H5FD_MEM_DEFAULT);
    eof = H5FD_get_eof(f->shared->lf, H5FD_MEM_DEFAULT);

    /* Determine the maximum */
    tmp_max = MAX(eof, eoa);
    if (HADDR_UNDEF == tmp_max)
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, FAIL, "file get eof/eoa requests failed")

    *max_eof_eoa = tmp_max;

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__get_max_eof_eoa() */

/*-------------------------------------------------------------------------
 * Function:    H5F_get_metadata_read_retry_info
 *
 * Purpose:     Private function to retrieve the collection of read retries
 *              for metadata items with checksum.
 *
 * Return:      SUCCEED/FAIL
 *
 *-------------------------------------------------------------------------
 */
herr_t
H5F_get_metadata_read_retry_info(H5F_t *file, H5F_retry_info_t *info)
{
    unsigned i, j;                /* Local index variable */
    size_t   tot_size;            /* Size of each retries[i] */
    herr_t   ret_value = SUCCEED; /* Return value */

    FUNC_ENTER_NOAPI(FAIL)

    /* Check args */
    HDassert(file);
    HDassert(info);

    /* Copy the # of bins for "retries" array */
    info->nbins = file->shared->retries_nbins;

    /* Initialize the array of "retries" */
    HDmemset(info->retries, 0, sizeof(info->retries));

    /* Return if there are no bins -- no retries */
    if (!info->nbins)
        HGOTO_DONE(SUCCEED);

    /* Calculate size for each retries[i] */
    tot_size = info->nbins * sizeof(uint32_t);

    /* Map and copy information to info's retries for metadata items with tracking for read retries */
    j = 0;
    for (i = 0; i < H5AC_NTYPES; i++) {
        switch (i) {
            case H5AC_OHDR_ID:
            case H5AC_OHDR_CHK_ID:
            case H5AC_BT2_HDR_ID:
            case H5AC_BT2_INT_ID:
            case H5AC_BT2_LEAF_ID:
            case H5AC_FHEAP_HDR_ID:
            case H5AC_FHEAP_DBLOCK_ID:
            case H5AC_FHEAP_IBLOCK_ID:
            case H5AC_FSPACE_HDR_ID:
            case H5AC_FSPACE_SINFO_ID:
            case H5AC_SOHM_TABLE_ID:
            case H5AC_SOHM_LIST_ID:
            case H5AC_EARRAY_HDR_ID:
            case H5AC_EARRAY_IBLOCK_ID:
            case H5AC_EARRAY_SBLOCK_ID:
            case H5AC_EARRAY_DBLOCK_ID:
            case H5AC_EARRAY_DBLK_PAGE_ID:
            case H5AC_FARRAY_HDR_ID:
            case H5AC_FARRAY_DBLOCK_ID:
            case H5AC_FARRAY_DBLK_PAGE_ID:
            case H5AC_SUPERBLOCK_ID:
                HDassert(j < H5F_NUM_METADATA_READ_RETRY_TYPES);
                if (file->shared->retries[i] != NULL) {
                    /* Allocate memory for retries[i]
                     *
                     * This memory should be released by the user with
                     * the H5free_memory() call.
                     */
                    if (NULL == (info->retries[j] = (uint32_t *)H5MM_malloc(tot_size)))
                        HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "memory allocation failed")

                    /* Copy the information */
                    H5MM_memcpy(info->retries[j], file->shared->retries[i], tot_size);
                }

                /* Increment location in info->retries[] array */
                j++;
                break;

            default:
                break;
        }
    }

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F_get_metadata_read_retry_info() */

/*-------------------------------------------------------------------------
 * Function:    H5F__start_swmr_write
 *
 * Purpose:     Private version of H5Fstart_swmr_write
 *
 *              1) Refresh opened objects: part 1
 *              2) Flush & reset accumulator
 *              3) Mark the file in SWMR writing mode
 *              4) Set metadata read attempts and retries info
 *              5) Disable accumulator
 *              6) Evict all cache entries except the superblock
 *              7) Refresh opened objects (part 2)
 *              8) Unlock the file
 *
 *              Pre-conditions:
 *
 *              1) The file being opened has v3 superblock
 *              2) The file is opened with H5F_ACC_RDWR
 *              3) The file is not already marked for SWMR writing
 *              4) Current implementaion for opened objects:
 *                  --only allow datasets and groups without attributes
 *                  --disallow named datatype with/without attributes
 *                  --disallow opened attributes attached to objects
 *
 * NOTE:        Currently, only opened groups and datasets are allowed
 *              when enabling SWMR via H5Fstart_swmr_write().
 *              Will later implement a different approach--
 *              set up flush dependency/proxy even for file opened without
 *              SWMR to resolve issues with opened objects.
 *
 * Return:      SUCCEED/FAIL
 *
 *-------------------------------------------------------------------------
 */
herr_t
H5F__start_swmr_write(H5F_t *f)
{
    hbool_t     ci_load        = FALSE;  /* whether MDC ci load requested */
    hbool_t     ci_write       = FALSE;  /* whether MDC CI write requested */
    size_t      grp_dset_count = 0;      /* # of open objects: groups & datasets */
    size_t      nt_attr_count  = 0;      /* # of opened named datatypes  + opened attributes */
    hid_t *     obj_ids        = NULL;   /* List of ids */
    H5G_loc_t * obj_glocs      = NULL;   /* Group location of the object */
    H5O_loc_t * obj_olocs      = NULL;   /* Object location */
    H5G_name_t *obj_paths      = NULL;   /* Group hierarchy path */
    size_t      u;                       /* Local index variable */
    hbool_t     setup         = FALSE;   /* Boolean flag to indicate whether SWMR setting is enabled */
    H5VL_t *    vol_connector = NULL;    /* VOL connector for the file */
    herr_t      ret_value     = SUCCEED; /* Return value */

    FUNC_ENTER_PACKAGE

    /* Sanity check */
    HDassert(f);
    HDassert(f->shared);

    /* Should have write permission */
    if ((H5F_INTENT(f) & H5F_ACC_RDWR) == 0)
        HGOTO_ERROR(H5E_FILE, H5E_BADVALUE, FAIL, "no write intent on file")

    /* Check superblock version */
    if (f->shared->sblock->super_vers < HDF5_SUPERBLOCK_VERSION_3)
        HGOTO_ERROR(H5E_FILE, H5E_BADVALUE, FAIL, "file superblock version - should be at least 3")

    /* Check for correct file format version */
    if ((f->shared->low_bound < H5F_LIBVER_V110) || (f->shared->high_bound < H5F_LIBVER_V110))
        HGOTO_ERROR(H5E_FILE, H5E_BADVALUE, FAIL,
                    "file format version does not support SWMR - needs to be 1.10 or greater")

    /* Should not be marked for SWMR writing mode already */
    if (f->shared->sblock->status_flags & H5F_SUPER_SWMR_WRITE_ACCESS)
        HGOTO_ERROR(H5E_FILE, H5E_BADVALUE, FAIL, "file already in SWMR writing mode")

    /* Check to see if cache image is enabled.  Fail if so */
    if (H5C_cache_image_status(f, &ci_load, &ci_write) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, FAIL, "can't get MDC cache image status")
    if (ci_load || ci_write)
        HGOTO_ERROR(H5E_FILE, H5E_UNSUPPORTED, FAIL, "can't have both SWMR and MDC cache image")

    /* Flush the superblock extension */
    if (H5F_flush_tagged_metadata(f, f->shared->sblock->ext_addr) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTFLUSH, FAIL, "unable to flush superblock extension")

    /* Flush data buffers */
    if (H5F__flush(f) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTFLUSH, FAIL, "unable to flush file's cached information")

    /* Get the # of opened named datatypes and attributes */
    if (H5F_get_obj_count(f, H5F_OBJ_DATATYPE | H5F_OBJ_ATTR, FALSE, &nt_attr_count) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_BADITER, FAIL, "H5F_get_obj_count failed")
    if (nt_attr_count > 0)
        HGOTO_ERROR(H5E_FILE, H5E_BADVALUE, FAIL, "named datatypes and/or attributes opened in the file")

    /* Get the # of opened datasets and groups */
    if (H5F_get_obj_count(f, H5F_OBJ_GROUP | H5F_OBJ_DATASET, FALSE, &grp_dset_count) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_BADITER, FAIL, "H5F_get_obj_count failed")

    if (grp_dset_count > 0) {
        /* Allocate space for group and object locations */
        if ((obj_ids = (hid_t *)H5MM_malloc(grp_dset_count * sizeof(hid_t))) == NULL)
            HGOTO_ERROR(H5E_FILE, H5E_NOSPACE, FAIL, "can't allocate buffer for hid_t")
        if ((obj_glocs = (H5G_loc_t *)H5MM_malloc(grp_dset_count * sizeof(H5G_loc_t))) == NULL)
            HGOTO_ERROR(H5E_FILE, H5E_NOSPACE, FAIL, "can't allocate buffer for H5G_loc_t")
        if ((obj_olocs = (H5O_loc_t *)H5MM_malloc(grp_dset_count * sizeof(H5O_loc_t))) == NULL)
            HGOTO_ERROR(H5E_FILE, H5E_NOSPACE, FAIL, "can't allocate buffer for H5O_loc_t")
        if ((obj_paths = (H5G_name_t *)H5MM_malloc(grp_dset_count * sizeof(H5G_name_t))) == NULL)
            HGOTO_ERROR(H5E_FILE, H5E_NOSPACE, FAIL, "can't allocate buffer for H5G_name_t")

        /* Get the list of opened object ids (groups & datasets) */
        if (H5F_get_obj_ids(f, H5F_OBJ_GROUP | H5F_OBJ_DATASET, grp_dset_count, obj_ids, FALSE,
                            &grp_dset_count) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTGET, FAIL, "H5F_get_obj_ids failed")

        /* Save the VOL connector and the object wrapping context for the refresh step */
        if (grp_dset_count > 0) {
            H5VL_object_t *vol_obj;

            /* Get the VOL object for one of the IDs */
            if (NULL == (vol_obj = H5VL_vol_object(obj_ids[0])))
                HGOTO_ERROR(H5E_FILE, H5E_BADTYPE, FAIL, "invalid object identifier")

            /* Get the (top) connector for the ID */
            vol_connector = vol_obj->connector;
        } /* end if */

        /* Gather information about opened objects (groups, datasets) in the file */
        /* (For refresh later on) */
        for (u = 0; u < grp_dset_count; u++) {
            H5O_loc_t *oloc; /* object location */
            H5G_loc_t  tmp_loc;

            /* Set up the id's group location */
            obj_glocs[u].oloc = &obj_olocs[u];
            obj_glocs[u].path = &obj_paths[u];
            H5G_loc_reset(&obj_glocs[u]);

            /* get the id's object location */
            if ((oloc = H5O_get_loc(obj_ids[u])) == NULL)
                HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not an object")

            /* Make deep local copy of object's location information */
            H5G_loc(obj_ids[u], &tmp_loc);
            H5G_loc_copy(&obj_glocs[u], &tmp_loc, H5_COPY_DEEP);

            /* Close the object */
            if (H5I_dec_ref(obj_ids[u]) < 0)
                HGOTO_ERROR(H5E_ATOM, H5E_CANTCLOSEOBJ, FAIL, "decrementing object ID failed")
        } /* end for */
    }     /* end if */

    /* Flush and reset the accumulator */
    if (H5F__accum_reset(f->shared, TRUE) < 0)
        HGOTO_ERROR(H5E_IO, H5E_CANTRESET, FAIL, "can't reset accumulator")

    /* Turn on SWMR write in shared file open flags */
    f->shared->flags |= H5F_ACC_SWMR_WRITE;

    /* Mark the file in SWMR writing mode */
    f->shared->sblock->status_flags |= H5F_SUPER_SWMR_WRITE_ACCESS;

    /* Set up metadata read attempts */
    f->shared->read_attempts = H5F_SWMR_METADATA_READ_ATTEMPTS;

    /* Initialize "retries" and "retries_nbins" */
    if (H5F_set_retries(f) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTINIT, FAIL, "can't set retries and retries_nbins")

    /* Turn off usage of accumulator */
    f->shared->feature_flags &= ~(unsigned)H5FD_FEAT_ACCUMULATE_METADATA;
    if (H5FD_set_feature_flags(f->shared->lf, f->shared->feature_flags) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTSET, FAIL, "can't set feature_flags in VFD")

    setup = TRUE;

    /* Place an advisory lock on the file */
    if (H5F_USE_FILE_LOCKING(f))
        if (H5FD_lock(f->shared->lf, TRUE) < 0) {
            HGOTO_ERROR(H5E_FILE, H5E_CANTLOCKFILE, FAIL, "unable to lock the file")
        }

    /* Mark superblock as dirty */
    if (H5F_super_dirty(f) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTMARKDIRTY, FAIL, "unable to mark superblock as dirty")

    /* Flush the superblock */
    if (H5F_flush_tagged_metadata(f, H5AC__SUPERBLOCK_TAG) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTFLUSH, FAIL, "unable to flush superblock")

    /* Evict all flushed entries in the cache except the pinned superblock */
    if (H5F__evict_cache_entries(f) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTFLUSH, FAIL, "unable to evict file's cached information")

    /* Refresh (reopen) the objects (groups & datasets) in the file */
    for (u = 0; u < grp_dset_count; u++)
        if (H5O_refresh_metadata_reopen(obj_ids[u], &obj_glocs[u], vol_connector, TRUE) < 0)
            HGOTO_ERROR(H5E_ATOM, H5E_CLOSEERROR, FAIL, "can't refresh-close object")

done:
    if (ret_value < 0 && setup) {

        /* Re-enable accumulator */
        f->shared->feature_flags |= (unsigned)H5FD_FEAT_ACCUMULATE_METADATA;
        if (H5FD_set_feature_flags(f->shared->lf, f->shared->feature_flags) < 0)
            HDONE_ERROR(H5E_FILE, H5E_CANTSET, FAIL, "can't set feature_flags in VFD")

        /* Reset the # of read attempts */
        f->shared->read_attempts = H5F_METADATA_READ_ATTEMPTS;
        if (H5F_set_retries(f) < 0)
            HDONE_ERROR(H5E_FILE, H5E_CANTINIT, FAIL, "can't set retries and retries_nbins")

        /* Un-set H5F_ACC_SWMR_WRITE in shared open flags */
        f->shared->flags &= ~H5F_ACC_SWMR_WRITE;

        /* Unmark the file: not in SWMR writing mode */
        f->shared->sblock->status_flags &= (uint8_t)(~H5F_SUPER_SWMR_WRITE_ACCESS);

        /* Mark superblock as dirty */
        if (H5F_super_dirty(f) < 0)
            HDONE_ERROR(H5E_FILE, H5E_CANTMARKDIRTY, FAIL, "unable to mark superblock as dirty")

        /* Flush the superblock */
        if (H5F_flush_tagged_metadata(f, H5AC__SUPERBLOCK_TAG) < 0)
            HDONE_ERROR(H5E_FILE, H5E_CANTFLUSH, FAIL, "unable to flush superblock")
    } /* end if */

    /* Unlock the file */
    if (H5F_USE_FILE_LOCKING(f))
        if (H5FD_unlock(f->shared->lf) < 0)
            HDONE_ERROR(H5E_FILE, H5E_CANTUNLOCKFILE, FAIL, "unable to unlock the file")

    /* Free memory */
    if (obj_ids)
        H5MM_xfree(obj_ids);
    if (obj_glocs)
        H5MM_xfree(obj_glocs);
    if (obj_olocs)
        H5MM_xfree(obj_olocs);
    if (obj_paths)
        H5MM_xfree(obj_paths);

    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__start_swmr_write() */

/*-------------------------------------------------------------------------
 * Function:    H5F__format_convert
 *
 * Purpose:     Private version of H5Fformat_convert
 *
 * Return:      Success:        SUCCEED
 *              Failure:        FAIL
 *-------------------------------------------------------------------------
 */
herr_t
H5F__format_convert(H5F_t *f)
{
    hbool_t mark_dirty = FALSE;   /* Whether to mark the file's superblock dirty */
    herr_t  ret_value  = SUCCEED; /* Return value */

    FUNC_ENTER_PACKAGE

    /* Sanity check */
    HDassert(f);
    HDassert(f->shared);

    /* Check if the superblock should be downgraded */
    if (f->shared->sblock->super_vers > HDF5_SUPERBLOCK_VERSION_V18_LATEST) {
        f->shared->sblock->super_vers = HDF5_SUPERBLOCK_VERSION_V18_LATEST;
        mark_dirty                    = TRUE;
    }

    /* Check for persistent freespace manager, which needs to be downgraded */
    if (!(f->shared->fs_strategy == H5F_FILE_SPACE_STRATEGY_DEF &&
          f->shared->fs_persist == H5F_FREE_SPACE_PERSIST_DEF &&
          f->shared->fs_threshold == H5F_FREE_SPACE_THRESHOLD_DEF &&
          f->shared->fs_page_size == H5F_FILE_SPACE_PAGE_SIZE_DEF)) {

        /* Check to remove free-space manager info message from superblock extension */
        if (H5F_addr_defined(f->shared->sblock->ext_addr))
            if (H5F__super_ext_remove_msg(f, H5O_FSINFO_ID) < 0)
                HGOTO_ERROR(H5E_FILE, H5E_CANTRELEASE, FAIL,
                            "error in removing message from superblock extension")

        /* Close freespace manager */
        if (H5MF_try_close(f) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTRELEASE, FAIL, "unable to free free-space address")

        /* Set non-persistent freespace manager */
        f->shared->fs_strategy  = H5F_FILE_SPACE_STRATEGY_DEF;
        f->shared->fs_persist   = H5F_FREE_SPACE_PERSIST_DEF;
        f->shared->fs_threshold = H5F_FREE_SPACE_THRESHOLD_DEF;
        f->shared->fs_page_size = H5F_FILE_SPACE_PAGE_SIZE_DEF;

        /* Indicate that the superblock should be marked dirty */
        mark_dirty = TRUE;
    } /* end if */

    /* Check if we should mark the superblock dirty */
    if (mark_dirty)
        /* Mark superblock as dirty */
        if (H5F_super_dirty(f) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTMARKDIRTY, FAIL, "unable to mark superblock as dirty")

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* H5F__format_convert() */

/*-------------------------------------------------------------------------
 * Function:    H5F_get_file_id
 *
 * Purpose:     The private version of H5Iget_file_id(), obtains the file
 *              ID given an object ID.
 *
 * Return:      Success:    The file ID associated with the object
 *              Failure:    H5I_INVALID_HID
 *
 *-------------------------------------------------------------------------
 */
hid_t
H5F_get_file_id(H5VL_object_t *vol_obj, H5I_type_t obj_type, hbool_t app_ref)
{
    void *            vol_obj_file = NULL;               /* File object pointer */
    H5VL_loc_params_t loc_params;                        /* Location parameters */
    hid_t             file_id         = H5I_INVALID_HID; /* File ID for object */
    hbool_t           vol_wrapper_set = FALSE; /* Whether the VOL object wrapping context was set up */
    hid_t             ret_value       = H5I_INVALID_HID; /* Return value */

    FUNC_ENTER_NOAPI(H5I_INVALID_HID)

    /* Set location parameters */
    loc_params.type     = H5VL_OBJECT_BY_SELF;
    loc_params.obj_type = obj_type;

    /* Retrieve VOL file from object */
    if (H5VL_object_get(vol_obj, &loc_params, H5VL_OBJECT_GET_FILE, H5P_DATASET_XFER_DEFAULT, H5_REQUEST_NULL,
                        &vol_obj_file) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, H5I_INVALID_HID, "can't retrieve file from object")

    /* Check if the file's ID already exists */
    if (H5I_find_id(vol_obj_file, H5I_FILE, &file_id) < 0)
        HGOTO_ERROR(H5E_FILE, H5E_CANTGET, H5I_INVALID_HID, "getting file ID failed")

    /* If the ID does not exist, register it with the VOL connector */
    if (H5I_INVALID_HID == file_id) {
        /* Set wrapper info in API context */
        if (H5VL_set_vol_wrapper(vol_obj) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "can't set VOL wrapper info")
        vol_wrapper_set = TRUE;

        if ((file_id = H5VL_wrap_register(H5I_FILE, vol_obj_file, app_ref)) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTREGISTER, H5I_INVALID_HID, "unable to atomize file handle")
    } /* end if */
    else {
        /* Increment ref count on existing ID */
        if (H5I_inc_ref(file_id, app_ref) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTSET, H5I_INVALID_HID, "incrementing file ID failed")
    } /* end else */

    /* Set return value */
    ret_value = file_id;

done:
    /* Reset object wrapping info in API context */
    if (vol_wrapper_set && H5VL_reset_vol_wrapper() < 0)
        HDONE_ERROR(H5E_FILE, H5E_CANTRESET, H5I_INVALID_HID, "can't reset VOL wrapper info")

    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F_get_file_id() */

/*-------------------------------------------------------------------------
 * Function:    H5F_set_min_dset_ohdr
 *
 * Purpose:     Set the crt_dset_ohdr_flag field with a new value.
 *
 * Return:      SUCCEED/FAIL
 *-------------------------------------------------------------------------
 */
herr_t
H5F_set_min_dset_ohdr(H5F_t *f, hbool_t minimize)
{
    /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */
    FUNC_ENTER_NOAPI_NOINIT_NOERR

    /* Sanity check */
    HDassert(f);
    HDassert(f->shared);

    f->shared->crt_dset_min_ohdr_flag = minimize;

    FUNC_LEAVE_NOAPI(SUCCEED)
} /* H5F_set_min_dset_ohdr() */