path: root/src/H5Zpublic.h

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 * Copyright by The HDF Group.                                               *
 * All rights reserved.                                                      *
 *                                                                           *
 * This file is part of HDF5.  The full HDF5 copyright notice, including     *
 * terms governing use, modification, and redistribution, is contained in    *
 * the COPYING file, which can be found at the root of the source code       *
 * distribution tree, or in https://www.hdfgroup.org/licenses.               *
 * If you do not have access to either file, you may request a copy from     *
 * help@hdfgroup.org.                                                        *
 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

#ifndef H5Zpublic_H
#define H5Zpublic_H

#include "H5public.h" /* Generic Functions                        */

/**
 * \brief Filter identifiers
 *
 * \details Values 0 through 255 are for filters defined by the HDF5 library.
 *          Values 256 through 511 are available for testing new filters.
 *          Subsequent values should be obtained from the HDF5 development team
 *          at mailto:help@hdfgroup.org. These values will never change because
 *          they appear in the HDF5 files.
 */
typedef int H5Z_filter_t;

/* Filter IDs */
/**
 * no filter
 */
#define H5Z_FILTER_ERROR (-1)
/**
 * reserved indefinitely
 */
#define H5Z_FILTER_NONE 0
/**
 * deflation like gzip
 */
#define H5Z_FILTER_DEFLATE 1
/**
 * shuffle the data
 */
#define H5Z_FILTER_SHUFFLE 2
/**
 * fletcher32 checksum of EDC
 */
#define H5Z_FILTER_FLETCHER32 3
/**
 * szip compression
 */
#define H5Z_FILTER_SZIP 4
/**
 * nbit compression
 */
#define H5Z_FILTER_NBIT 5
/**
 * scale+offset compression
 */
#define H5Z_FILTER_SCALEOFFSET 6
/**
 * filter ids below this value are reserved for library use
 */
#define H5Z_FILTER_RESERVED 256
/**
 * maximum filter id
 */
#define H5Z_FILTER_MAX 65535

/* General macros */
/**
 * Symbol to remove all filters in H5Premove_filter()
 */
#define H5Z_FILTER_ALL 0
/**
 * Maximum number of filters allowed in a pipeline
 *
 * \internal (should probably be allowed to be an unlimited amount, but
 *            currently each filter uses a bit in a 32-bit field, so the format
 *            would have to be changed to accommodate that)
 */
#define H5Z_MAX_NFILTERS 32

/* Flags for filter definition (stored) */
/**
 * definition flag mask
 */
#define H5Z_FLAG_DEFMASK 0x00ff
/**
 * filter is mandatory
 */
#define H5Z_FLAG_MANDATORY 0x0000
/**
 * filter is optional
 */
#define H5Z_FLAG_OPTIONAL 0x0001

/* Additional flags for filter invocation (not stored) */
/**
 * invocation flag mask
 */
#define H5Z_FLAG_INVMASK 0xff00
/**
 * reverse direction; read
 */
#define H5Z_FLAG_REVERSE 0x0100
/**
 * skip EDC filters for read
 */
#define H5Z_FLAG_SKIP_EDC 0x0200

/* Special parameters for szip compression */
/* [These are aliases for the similar definitions in szlib.h, which we can't
 * include directly due to the duplication of various symbols with the zlib.h
 * header file] */
/**
 * \ingroup SZIP */
#define H5_SZIP_ALLOW_K13_OPTION_MASK 1
/**
 * \ingroup SZIP */
#define H5_SZIP_CHIP_OPTION_MASK 2
/**
 * \ingroup SZIP */
#define H5_SZIP_EC_OPTION_MASK 4
/**
 * \ingroup SZIP */
#define H5_SZIP_NN_OPTION_MASK 32
/**
 * \ingroup SZIP */
#define H5_SZIP_MAX_PIXELS_PER_BLOCK 32

/* Macros for the shuffle filter */
/**
 * \ingroup SHUFFLE
 * Number of parameters that users can set for the shuffle filter
 */
#define H5Z_SHUFFLE_USER_NPARMS 0
/**
 * \ingroup SHUFFLE
 * Total number of parameters for the shuffle filter
 */
#define H5Z_SHUFFLE_TOTAL_NPARMS 1

/* Macros for the szip filter */
/**
 * \ingroup SZIP
 * Number of parameters that users can set for SZIP
 */
#define H5Z_SZIP_USER_NPARMS 2
/**
 * \ingroup SZIP
 * Total number of parameters for SZIP filter
 */
#define H5Z_SZIP_TOTAL_NPARMS 4
/**
 * \ingroup SZIP
 * "User" parameter for option mask
 */
#define H5Z_SZIP_PARM_MASK 0
/**
 * \ingroup SZIP
 * "User" parameter for pixels-per-block
 */
#define H5Z_SZIP_PARM_PPB 1
/**
 * \ingroup SZIP
 * "Local" parameter for bits-per-pixel
 */
#define H5Z_SZIP_PARM_BPP 2
/**
 * \ingroup SZIP
 * "Local" parameter for pixels-per-scanline
 */
#define H5Z_SZIP_PARM_PPS 3

/* Macros for the nbit filter */
/**
 * \ingroup NBIT
 * Number of parameters that users can set for the N-bit filter
 */
#define H5Z_NBIT_USER_NPARMS 0 /* Number of parameters that users can set */

/* Macros for the scale offset filter */
/**
 * \ingroup SCALEOFFSET
 * Number of parameters that users can set for the scale-offset filter
 */
#define H5Z_SCALEOFFSET_USER_NPARMS 2

/* Special parameters for ScaleOffset filter*/
/**
 * \ingroup SCALEOFFSET */
#define H5Z_SO_INT_MINBITS_DEFAULT 0
/**
 * \ingroup SCALEOFFSET */
typedef enum H5Z_SO_scale_type_t {
    H5Z_SO_FLOAT_DSCALE = 0,
    H5Z_SO_FLOAT_ESCALE = 1,
    H5Z_SO_INT          = 2
} H5Z_SO_scale_type_t;

/**
 * \ingroup FLETCHER32
 * Values to decide if EDC is enabled for reading data
 */
typedef enum H5Z_EDC_t {
    H5Z_ERROR_EDC   = -1, /**< error value */
    H5Z_DISABLE_EDC = 0,
    H5Z_ENABLE_EDC  = 1,
    H5Z_NO_EDC      = 2 /**< sentinel */
} H5Z_EDC_t;

/* Bit flags for H5Zget_filter_info */
#define H5Z_FILTER_CONFIG_ENCODE_ENABLED (0x0001)
#define H5Z_FILTER_CONFIG_DECODE_ENABLED (0x0002)

/**
 * Return values for filter callback function
 */
typedef enum H5Z_cb_return_t {
    H5Z_CB_ERROR = -1, /**< error value */
    H5Z_CB_FAIL  = 0,  /**< I/O should fail if filter fails. */
    H5Z_CB_CONT  = 1,  /**< I/O continues if filter fails.   */
    H5Z_CB_NO    = 2   /**< sentinel */
} H5Z_cb_return_t;

//! <!-- [H5Z_filter_func_t_snip] -->
/**
 *  Filter callback function definition
 */
typedef H5Z_cb_return_t (*H5Z_filter_func_t)(H5Z_filter_t filter, void *buf, size_t buf_size, void *op_data);
//! <!-- [H5Z_filter_func_t_snip] -->

#ifdef __cplusplus
extern "C" {
#endif

/**
 * \ingroup H5Z
 *
 * \brief Determines whether a filter is available
 *
 * \param[in] id Filter identifier
 * \return \htri_t
 *
 * \details H5Zfilter_avail() determines whether the filter specified in \p id
 *          is available to the application.
 *
 * \since 1.6.0
 */
H5_DLL htri_t H5Zfilter_avail(H5Z_filter_t id);
/**
 * \ingroup H5Z
 *
 * \brief Retrieves information about a filter
 *
 * \param[in] filter Filter identifier
 * \param[out] filter_config_flags A bit field encoding the returned filter
 *                                 information
 * \return \herr_t
 *
 * \details H5Zget_filter_info() retrieves information about a filter. At
 *          present, this means that the function retrieves a filter's
 *          configuration flags, indicating whether the filter is configured to
 *          decode data, encode data, neither, or both.
 *
 *          If \p filter_config_flags is not set to NULL prior to the function
 *          call, the returned parameter contains a bit field specifying the
 *          available filter configuration. The configuration flag values can
 *          then be determined through a series of bitwise AND operations, as
 *          described below.
 *
 *          Valid filter configuration flags include the following:
 *          <table>
 *            <tr><td>#H5Z_FILTER_CONFIG_ENCODE_ENABLED</td>
 *                <td>Encoding is enabled for this filter</td></tr>
 *            <tr><td>#H5Z_FILTER_CONFIG_DECODE_ENABLED</td>
 *                <td>Decoding is enabled for this filter</td></tr>
 *          </table>
 *
 *          A bitwise AND of the returned \p filter_config_flags and a valid
 *          filter configuration flag will reveal whether the related
 *          configuration option is available. For example, if the value of
 *          \code
 *          H5Z_FILTER_CONFIG_ENCODE_ENABLED & filter_config_flags
 *          \endcode
 *          is true, i.e., greater than 0 (zero), the queried filter
 *          is configured to encode data; if the value is \c false, i.e., equal to
 *          0 (zero), the filter is not so configured.
 *
 *          If a filter is not encode-enabled, the corresponding \c H5Pset_*
 *          function will return an error if the filter is added to a dataset
 *          creation property list (which is required if the filter is to be
 *          used to encode that dataset). For example, if the
 *          #H5Z_FILTER_CONFIG_ENCODE_ENABLED flag is not returned for the SZIP
 *          filter, #H5Z_FILTER_SZIP, a call to H5Pset_szip() will fail.
 *
 *          If a filter is not decode-enabled, the application will not be able
 *          to read an existing file encoded with that filter.
 *
 *          This function should be called, and the returned \p
 *          filter_config_flags should be analyzed, before calling any other function,
 *          such as H5Pset_szip(), that might require a particular filter
 *          configuration.
 *
 * \since 1.6.0
 */
H5_DLL herr_t H5Zget_filter_info(H5Z_filter_t filter, unsigned int *filter_config_flags);

#ifdef __cplusplus
}
#endif

#endif /* _H5Zpublic_H */