path: root/tools/h5dump/Makefile.in

# Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2013 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5.  The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the files COPYING and Copyright.html.  COPYING can be found at the root
# of the source code distribution tree; Copyright.html can be found at the
# root level of an installed copy of the electronic HDF5 document set and
# is linked from the top-level documents page.  It can also be found at
# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
# access to either file, you may request a copy from help@hdfgroup.org.
#
# HDF5 Library Makefile(.in)
#

VPATH = @srcdir@
am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(top_srcdir)/config/commence.am \
	$(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \
	$(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \
	$(srcdir)/testh5dump.sh.in $(srcdir)/testh5dumppbits.sh.in \
	$(srcdir)/testh5dumpxml.sh.in $(top_srcdir)/bin/depcomp \
	$(top_srcdir)/bin/test-driver
check_PROGRAMS = $(am__EXEEXT_1) binread$(EXEEXT)
bin_PROGRAMS = h5dump$(EXEEXT)
TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
subdir = tools/h5dump
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/H5config.h \
	$(top_builddir)/fortran/src/H5config_f.inc
CONFIG_CLEAN_FILES = testh5dump.sh testh5dumppbits.sh testh5dumpxml.sh
CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
am__EXEEXT_1 = h5dumpgentest$(EXEEXT)
PROGRAMS = $(bin_PROGRAMS)
binread_SOURCES = binread.c
binread_OBJECTS = binread.$(OBJEXT)
binread_LDADD = $(LDADD)
binread_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 = 
am_h5dump_OBJECTS = h5dump.$(OBJEXT) h5dump_ddl.$(OBJEXT) \
	h5dump_xml.$(OBJEXT)
h5dump_OBJECTS = $(am_h5dump_OBJECTS)
h5dump_LDADD = $(LDADD)
h5dump_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
h5dump_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(h5dump_LDFLAGS) $(LDFLAGS) -o $@
h5dumpgentest_SOURCES = h5dumpgentest.c
h5dumpgentest_OBJECTS = h5dumpgentest.$(OBJEXT)
h5dumpgentest_LDADD = $(LDADD)
h5dumpgentest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo "  CC      " $@;
am__v_CC_1 = 
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo "  CCLD    " $@;
am__v_CCLD_1 = 
SOURCES = binread.c $(h5dump_SOURCES) h5dumpgentest.c
DIST_SOURCES = binread.c $(h5dump_SOURCES) h5dumpgentest.c
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
am__tty_colors_dummy = \
  mgn= red= grn= lgn= blu= brg= std=; \
  am__color_tests=no
am__tty_colors = { \
  $(am__tty_colors_dummy); \
  if test "X$(AM_COLOR_TESTS)" = Xno; then \
    am__color_tests=no; \
  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
    am__color_tests=yes; \
  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
    am__color_tests=yes; \
  fi; \
  if test $$am__color_tests = yes; then \
    red=''; \
    grn=''; \
    lgn=''; \
    blu=''; \
    mgn=''; \
    brg=''; \
    std=''; \
  fi; \
}
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__recheck_rx = ^[ 	]*:recheck:[ 	]*
am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
  recheck = 1; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
        { \
          if ((getline line2 < ($$0 ".log")) < 0) \
	    recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
        { \
          recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
        { \
          break; \
        } \
    }; \
  if (recheck) \
    print $$0; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
  print "fatal: making $@: " msg | "cat >&2"; \
  exit 1; \
} \
function rst_section(header) \
{ \
  print header; \
  len = length(header); \
  for (i = 1; i <= len; i = i + 1) \
    printf "="; \
  printf "\n\n"; \
} \
{ \
  copy_in_global_log = 1; \
  global_test_result = "RUN"; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
         fatal("failed to read from " $$0 ".trs"); \
      if (line ~ /$(am__global_test_result_rx)/) \
        { \
          sub("$(am__global_test_result_rx)", "", line); \
          sub("[ 	]*$$", "", line); \
          global_test_result = line; \
        } \
      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
        copy_in_global_log = 0; \
    }; \
  if (copy_in_global_log) \
    { \
      rst_section(global_test_result ": " $$0); \
      while ((rc = (getline line < ($$0 ".log"))) != 0) \
      { \
        if (rc < 0) \
          fatal("failed to read from " $$0 ".log"); \
        print line; \
      }; \
      printf "\n"; \
    }; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
  --color-tests "$$am__color_tests" \
  --enable-hard-errors "$$am__enable_hard_errors" \
  --expect-failure "$$am__expect_failure"
# To be inserted before the command running the test.  Creates the
# directory for the log if needed.  Stores in $dir the directory
# containing $f, in $tst the test, in $log the log.  Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup);					\
$(am__vpath_adj_setup) $(am__vpath_adj)			\
$(am__tty_colors);					\
srcdir=$(srcdir); export srcdir;			\
case "$@" in						\
  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
    *) am__odir=.;; 					\
esac;							\
test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
if test -f "./$$f"; then dir=./;			\
elif test -f "$$f"; then dir=;				\
else dir="$(srcdir)/"; fi;				\
tst=$$dir$$f; log='$@'; 				\
if test -n '$(DISABLE_HARD_ERRORS)'; then		\
  am__enable_hard_errors=no; 				\
else							\
  am__enable_hard_errors=yes; 				\
fi; 							\
case " $(XFAIL_TESTS) " in				\
  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
    am__expect_failure=yes;;				\
  *)							\
    am__expect_failure=no;;				\
esac; 							\
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed).  The result is saved in the shell variable
# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
  bases='$(TEST_LOGS)'; \
  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
  bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
AM_RECURSIVE_TARGETS = check recheck
TEST_SUITE_LOG = test-suite.log
LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
  case '$@' in \
    */*) \
      case '$*' in \
        */*) b='$*';; \
          *) b=`echo '$@' | sed 's/\.log$$//'`; \
       esac;; \
    *) \
      b='$*';; \
  esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.sh.log=.log)
SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
AMTAR = @AMTAR@

# H5_CFLAGS holds flags that should be used when building hdf5,
# but which should not be exported to h5cc for building other programs.
# AM_CFLAGS is an automake construct which should be used by Makefiles 
# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@

# Include files in /src directory and /tools/lib directory
AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
	-I$(top_srcdir)/tools/lib
AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
AM_MAKEFLAGS = @AM_MAKEFLAGS@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BYTESEX = @BYTESEX@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_VERSION = @CC_VERSION@
CFLAGS = @CFLAGS@
CLEARFILEBUF = @CLEARFILEBUF@
CODESTACK = @CODESTACK@
CONFIG_DATE = @CONFIG_DATE@
CONFIG_MODE = @CONFIG_MODE@
CONFIG_USER = @CONFIG_USER@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CXX_VERSION = @CXX_VERSION@
CYGPATH_W = @CYGPATH_W@
DEBUG_PKG = @DEBUG_PKG@
DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
DIRECT_VFD = @DIRECT_VFD@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXTERNAL_FILTERS = @EXTERNAL_FILTERS@

# Make sure that these variables are exported to the Makefiles
F9XMODEXT = @F9XMODEXT@
F9XMODFLAG = @F9XMODFLAG@
F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
FC = @FC@
FCFLAGS = @FCFLAGS@
FCFLAGS_f90 = @FCFLAGS_f90@
FCLIBS = @FCLIBS@
FC_VERSION = @FC_VERSION@
FGREP = @FGREP@
FSEARCH_DIRS = @FSEARCH_DIRS@
GREP = @GREP@
H5_CFLAGS = @H5_CFLAGS@
H5_CPPFLAGS = @H5_CPPFLAGS@
H5_CXXFLAGS = @H5_CXXFLAGS@
H5_FCFLAGS = @H5_FCFLAGS@
H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
H5_LDFLAGS = @H5_LDFLAGS@
H5_VERSION = @H5_VERSION@
HADDR_T = @HADDR_T@
HAVE_DMALLOC = @HAVE_DMALLOC@
HAVE_PTHREAD = @HAVE_PTHREAD@
HDF5_HL = @HDF5_HL@
HDF5_INTERFACES = @HDF5_INTERFACES@
HDF_CXX = @HDF_CXX@
HDF_FORTRAN = @HDF_FORTRAN@
HID_T = @HID_T@
HL = @HL@
HL_FOR = @HL_FOR@
HSIZE_T = @HSIZE_T@
HSSIZE_T = @HSSIZE_T@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTRUMENT = @INSTRUMENT@
INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LL_PATH = @LL_PATH@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_STATIC_EXEC = @LT_STATIC_EXEC@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MPE = @MPE@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PARALLEL = @PARALLEL@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
RANLIB = @RANLIB@
ROOT = @ROOT@
RUNPARALLEL = @RUNPARALLEL@
RUNSERIAL = @RUNSERIAL@
R_INTEGER = @R_INTEGER@
R_LARGE = @R_LARGE@
SEARCH = @SEARCH@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SIZE_T = @SIZE_T@
STATIC_EXEC = @STATIC_EXEC@
STATIC_SHARED = @STATIC_SHARED@
STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
STRIP = @STRIP@
TESTPARALLEL = @TESTPARALLEL@
THREADSAFE = @THREADSAFE@
TIME = @TIME@
TR = @TR@
TRACE_API = @TRACE_API@
UNAME_INFO = @UNAME_INFO@
USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
USE_FILTER_SZIP = @USE_FILTER_SZIP@
USINGMEMCHECKER = @USINGMEMCHECKER@
VERSION = @VERSION@
WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
ac_ct_FC = @ac_ct_FC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@

# Install directories that automake doesn't know about
docdir = $(exec_prefix)/doc
dvidir = @dvidir@
enable_shared = @enable_shared@
enable_static = @enable_static@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@

# Shell commands used in Makefiles
RM = rm -f
CP = cp

# Some machines need a command to run executables; this is that command
# so that our tests will run.
# We use RUNEXEC instead of RUNSERIAL directly because it may be that
# some tests need to be run with a different command.  Older versions
# of the makefiles used the command
# $(LIBTOOL) --mode=execute
# in some directories, for instance.
RUNEXEC = $(RUNSERIAL)

# Libraries to link to while building
LIBHDF5 = $(top_builddir)/src/libhdf5.la
LIBH5TEST = $(top_builddir)/test/libh5test.la
LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la

# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
# has been removed. According to the official description of DESTDIR by Gnu at 
# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
# prepended to the normal and complete install path that it precedes for the 
# purpose of installing in a temporary directory which is useful for building 
# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
# path then begins with '//', which is incorrect and causes problems at least for 
# Cygwin.   

# Scripts used to build examples
# If only shared libraries have been installed, have h5cc build examples with
# shared libraries instead of static libraries
H5CC = ${DESTDIR}$(bindir)/h5cc
H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
H5FC = ${DESTDIR}$(bindir)/h5fc
H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
H5CPP = ${DESTDIR}$(bindir)/h5c++
ACLOCAL_AMFLAGS = "-I m4"

# The trace script; this is used on source files from the C library to
# insert tracing macros.
TRACE = perl $(top_srcdir)/bin/trace

# .chkexe files are used to mark tests that have run successfully.
# .chklog files are output from those tests.
# *.clog and *.clog2 are from the MPE option.

# Temporary files.  *.h5 are generated by h5dumpgentest.  They should
# copied to the testfiles/ directory if update is required.
CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 *.bin

# Test programs and scripts
TEST_PROG = h5dumpgentest
TEST_SCRIPT = testh5dump.sh testh5dumppbits.sh testh5dumpxml.sh
check_SCRIPTS = $(TEST_SCRIPT)
SCRIPT_DEPEND = h5dump$(EXEEXT)

# Add h5dump specific linker flags here
h5dump_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)

# All the programs depend on the hdf5 and h5tools libraries
LDADD = $(LIBH5TOOLS) $(LIBHDF5)

# Source files for the program
h5dump_SOURCES = h5dump.c h5dump_ddl.c h5dump_xml.c
DISTCLEANFILES = testh5dump.sh testh5dumppbits.sh testh5dumpxml.sh

# Automake needs to be taught how to build lib, progs, and tests targets.
# These will be filled in automatically for the most part (e.g.,
# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
# EXTRA_TEST variables are supplied to allow the user to force targets to
# be built at certain times. 
LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)

PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
        $(EXTRA_PROG)

chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
TEST_EXTENSIONS = .sh
SH_LOG_COMPILER = $(SHELL)
AM_SH_LOG_FLAGS = 
TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
all: all-am

.SUFFIXES:
.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5dump/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign tools/h5dump/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;
$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am:

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
testh5dump.sh: $(top_builddir)/config.status $(srcdir)/testh5dump.sh.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
testh5dumppbits.sh: $(top_builddir)/config.status $(srcdir)/testh5dumppbits.sh.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
testh5dumpxml.sh: $(top_builddir)/config.status $(srcdir)/testh5dumpxml.sh.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
	fi; \
	for p in $$list; do echo "$$p $$p"; done | \
	sed 's/$(EXEEXT)$$//' | \
	while read p p1; do if test -f $$p \
	 || test -f $$p1 \
	  ; then echo "$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n;h' \
	    -e 's|.*|.|' \
	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
	sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
	    else { print "f", $$3 "/" $$4, $$1; } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	    test -z "$$files" || { \
	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	    } \
	; done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
	files=`for p in $$list; do echo "$$p"; done | \
	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
	      -e 's/$$/$(EXEEXT)/' \
	`; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(bindir)" && rm -f $$files

clean-binPROGRAMS:
	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list

clean-checkPROGRAMS:
	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list

binread$(EXEEXT): $(binread_OBJECTS) $(binread_DEPENDENCIES) $(EXTRA_binread_DEPENDENCIES) 
	@rm -f binread$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(binread_OBJECTS) $(binread_LDADD) $(LIBS)

h5dump$(EXEEXT): $(h5dump_OBJECTS) $(h5dump_DEPENDENCIES) $(EXTRA_h5dump_DEPENDENCIES) 
	@rm -f h5dump$(EXEEXT)
	$(AM_V_CCLD)$(h5dump_LINK) $(h5dump_OBJECTS) $(h5dump_LDADD) $(LIBS)

h5dumpgentest$(EXEEXT): $(h5dumpgentest_OBJECTS) $(h5dumpgentest_DEPENDENCIES) $(EXTRA_h5dumpgentest_DEPENDENCIES) 
	@rm -f h5dumpgentest$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(h5dumpgentest_OBJECTS) $(h5dumpgentest_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/binread.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5dump.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5dump_ddl.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5dump_xml.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5dumpgentest.Po@am__quote@

.c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<

.c.obj:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-am

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-am

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
	rm -f $< $@
	$(MAKE) $(AM_MAKEFLAGS) $<

# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
	@:

$(TEST_SUITE_LOG): $(TEST_LOGS)
	@$(am__set_TESTS_bases); \
	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
	redo_bases=`for i in $$bases; do \
	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
	            done`; \
	if test -n "$$redo_bases"; then \
	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
	  if $(am__make_dryrun); then :; else \
	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
	  fi; \
	fi; \
	if test -n "$$am__remaking_logs"; then \
	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
	       "recursion detected" >&2; \
	else \
	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
	fi; \
	if $(am__make_dryrun); then :; else \
	  st=0;  \
	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
	  for i in $$redo_bases; do \
	    test -f $$i.trs && test -r $$i.trs \
	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
	    test -f $$i.log && test -r $$i.log \
	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
	  done; \
	  test $$st -eq 0 || exit 1; \
	fi
	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
	ws='[ 	]'; \
	results=`for b in $$bases; do echo $$b.trs; done`; \
	test -n "$$results" || results=/dev/null; \
	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
	  success=true; \
	else \
	  success=false; \
	fi; \
	br='==================='; br=$$br$$br$$br$$br; \
	result_count () \
	{ \
	    if test x"$$1" = x"--maybe-color"; then \
	      maybe_colorize=yes; \
	    elif test x"$$1" = x"--no-color"; then \
	      maybe_colorize=no; \
	    else \
	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
	    fi; \
	    shift; \
	    desc=$$1 count=$$2; \
	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
	      color_start=$$3 color_end=$$std; \
	    else \
	      color_start= color_end=; \
	    fi; \
	    echo "$${color_start}# $$desc $$count$${color_end}"; \
	}; \
	create_testsuite_report () \
	{ \
	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
	  result_count $$1 "PASS: " $$pass  "$$grn"; \
	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
	  result_count $$1 "FAIL: " $$fail  "$$red"; \
	  result_count $$1 "XPASS:" $$xpass "$$red"; \
	  result_count $$1 "ERROR:" $$error "$$mgn"; \
	}; \
	{								\
	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
	    $(am__rst_title);						\
	  create_testsuite_report --no-color;				\
	  echo;								\
	  echo ".. contents:: :depth: 2";				\
	  echo;								\
	  for b in $$bases; do echo $$b; done				\
	    | $(am__create_global_log);					\
	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
	if $$success; then						\
	  col="$$grn";							\
	 else								\
	  col="$$red";							\
	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
	fi;								\
	echo "$${col}$$br$${std}"; 					\
	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
	echo "$${col}$$br$${std}"; 					\
	create_testsuite_report --maybe-color;				\
	echo "$$col$$br$$std";						\
	if $$success; then :; else					\
	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
	  fi;								\
	  echo "$$col$$br$$std";					\
	fi;								\
	$$success || exit 1
recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	bases=`for i in $$bases; do echo $$i; done \
	         | $(am__list_recheck_tests)` || exit 1; \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	log_list=`echo $$log_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
	        am__force_recheck=am--force-recheck \
	        TEST_LOGS="$$log_list"; \
	exit $$?
h5dumpgentest.log: h5dumpgentest$(EXEEXT)
	@p='h5dumpgentest$(EXEEXT)'; \
	b='h5dumpgentest'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
.sh.log:
	@p='$<'; \
	$(am__set_b); \
	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
@am__EXEEXT_TRUE@	@p='$<'; \
@am__EXEEXT_TRUE@	$(am__set_b); \
@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile $(PROGRAMS) all-local
installdirs:
	for dir in "$(DESTDIR)$(bindir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
	clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am: install-binPROGRAMS

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool mostlyclean-local

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-binPROGRAMS

.MAKE: check-am install-am install-strip

.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
	clean-generic clean-libtool cscopelist-am ctags ctags-am \
	distclean distclean-compile distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-binPROGRAMS \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
	uninstall-binPROGRAMS


# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
# This tells the Makefiles that these targets are not files to be built but
# commands that should be executed even if a file with the same name already
# exists.
.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
        build-tests check-clean check-install check-p check-s check-vfd \
        install-doc lib progs tests uninstall-doc _exec_check-s _test help

help:
	@$(top_srcdir)/bin/makehelp

# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
build-lib: $(LIB)
build-progs: $(LIB) $(PROGS)
build-tests: $(LIB) $(PROGS) $(chk_TESTS)

# General rule for recursive building targets.
# BUILT_SOURCES contain targets that need to be built before anything else
# in the directory (e.g., for Fortran type detection)
lib progs tests check-s check-p :: $(BUILT_SOURCES)
	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
	@for d in X $(SUBDIRS); do                                             \
	    if test $$d != X && test $$d != .; then                           \
	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
	    fi;                                                               \
	done

# General rule for recursive cleaning targets.  Like the rule above,
# but doesn't require building BUILT_SOURCES.
check-clean ::
	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
	@for d in X $(SUBDIRS); do                                             \
	    if test $$d != X && test $$d != .; then                           \
	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
	    fi;                                                               \
	done

# Tell Automake to build tests when the user types `make all' (this is
# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
# Automake won't build them automatically, either.
all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)

# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
# UPDATE: docs no longer reside in this build tree, so this target
# is depreciated.
install-doc uninstall-doc:
	@echo "Nothing to be done."

# clean up files generated by tests so they can be re-run.
build-check-clean:
	$(RM) -rf $(CHECK_CLEANFILES)

# run check-clean whenever mostlyclean is run
mostlyclean-local: build-check-clean

# check-install is just a synonym for installcheck
check-install: installcheck

# Run each test in order, passing $(TEST_FLAGS) to the program.
# Since tests are done in a shell loop, "make -i" does apply inside it.
# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
# The timestamps give a rough idea how much time the tests use.
#
# Note that targets in chk_TESTS (defined above) will be built when the user
# types 'make tests' or 'make check', but only programs in TEST_PROG,
# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
check-TESTS: test

test _test:
	@$(MAKE) build-check-s
	@$(MAKE) build-check-p

# Actual execution of check-s.
build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
	fi
	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
	fi

_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)

# The dummy.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
# $${log} is the log file.
# $${tname} is the name of test.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
	   tname=$(@:.chkexe_=)$(EXEEXT);\
	   log=$(@:.chkexe_=.chklog); \
	   echo "============================"; \
	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
	      echo "No need to test $${tname} again."; \
	   else \
	      echo "============================" > $${log}; \
	      if test "X$(FORTRAN_API)" = "Xyes"; then \
	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
	      elif test "X$(CXX_API)" = "Xyes"; then \
	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
	      else \
	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
	      fi; \
	      echo "============================" >> $${log}; \
	      srcdir="$(srcdir)" \
	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
	         && touch $(@:.chkexe_=.chkexe) || \
	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
	         (cat $${log} && false) || exit 1; \
	      echo "" >> $${log}; \
	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
	      echo "============================" >> $${log}; \
	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
	      cat $${log}; \
	   fi; \
	fi

# The dummysh.chkexe here prevents the target from being
# empty if there are no tests in the current directory.
# $${log} is the log file.
# $${tname} is the name of test.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
	   cmd=$(@:.chkexe_=);\
	   tname=`basename $$cmd`;\
	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
	   log=`basename $(@:.chkexe_=.chklog)`; \
	   echo "============================"; \
	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
	      echo "No need to test $${tname} again."; \
	   else \
	      echo "============================" > $${log}; \
	      if test "X$(FORTRAN_API)" = "Xyes"; then \
	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
	      elif test "X$(CXX_API)" = "Xyes"; then \
	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
	      else \
	         echo "Testing $${tname} $(TEST_FLAGS)"; \
	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
	      fi; \
	      echo "============================" >> $${log}; \
	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
	      srcdir="$(srcdir)" \
	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
	         && touch $${chkname} || \
	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
	         (cat $${log} && false) || exit 1; \
	      echo "" >> $${log}; \
	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
	      echo "============================" >> $${log}; \
	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
	      cat $${log}; \
	   fi; \
	   echo "============================"; \
	fi

# Actual execution of check-p.
build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
	fi
	@if test -n "$(TEST_PROG_PARA)"; then                                \
	    echo "**** Hint ****";                                            \
	    echo "Parallel test files reside in the current directory"        \
	         "by default.";                                               \
	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
	    echo "    export HDF5_PARAPREFIX";                                \
	    echo "    make check";                                            \
	    echo "**** end of Hint ****";                                     \
	fi
	@for test in $(TEST_PROG_PARA) dummy; do                             \
	   if test $$test != dummy; then                                      \
	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
	   fi;                                                                \
	done
	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
	  if test $$test != dummy; then                                      \
	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
	  fi;                                                                 \
	done
	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
	fi

# Run test with different Virtual File Driver
check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
	@for vfd in $(VFD_LIST) dummy; do                                     \
	    if test $$vfd != dummy; then                                      \
	        echo "============================";                          \
	        echo "Testing Virtual File Driver $$vfd";                     \
	        echo "============================";                          \
	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
	    fi;                                                               \
	done

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: